To create an OmniSwitch QoS list
Purpose
A QoS list includes support of egress policy configurations to perform last minute operations on the data traffic before it egresses through the port.
See To configure an OmniSwitch QoS Condition policy , To configure an OmniSwitch QoS policy action , and To create an OmniSwitch QoS policy to create AOS QoS policy actions, policy conditions, and policies.
Steps
1 |
Choose Policies→QoS→AOS QoS Policies from the NFM-P main menu. The AOS QoS Policies form opens. |
2 |
Click Create→QoS List or choose an AOS QoS list and click Properties. The AOS QoS List - Global Policy (Create | Edit) form opens. |
3 |
Configure the required parameters on the General tab. |
4 |
Click on the List Policies tab and click Create. The AOS QoS Policy List, AOS QoS List, Global Policy (Create) form opens. |
5 |
Select an AOS QoS policy list. |
6 |
Click Properties. The AOS QoS Policy - Global Policy (Edit) form opens. |
7 |
Configure the Precedence parameter, if required. |
8 |
Save your changes and close the forms. End of steps |