Workflow to configure access SAP forwarding class-based redirection

Stages

The following workflow describes the steps required to configure access SAP forwarding class-based redirection.

 

Create a global ingress/egress queue group template policy, as required.

  1. Create an ingress queue group template policy. See To configure a queue group ingress template policy for more information.

  2. Create an egress queue group template policy. See To configure a queue group egress template policy for more information.


Distribute the global ingress/egress queue group template policy to the NEs. See To release and distribute a policy for more information.


Create an ingress/egress queue group on the Ethernet access port. See To add a queue group to an Ethernet port for more information.


Create or configure a global access ingress/egress QoS policy with the forwarding class mapped to the queue group queue ID. The queue group queue ID must be included in the queue group template policy. Perform the following, as required:

  1. Create a SAP access ingress QoS policy. See To configure a SAP access ingress policy for more information.

  2. Create a SAP access egress QoS policy. See To configure a SAP access egress policy for more information.


Distribute the global access ingress/egress QoS policy to the NEs. See To release and distribute a policy for more information.


On the SAP configuration form, assign the access ingress/egress QoS policy to the SAP bound to the port on which the access ingress/egress queue group was created in Stage 3 . Perform one of the following, as required:

  1. Assign an access ingress/egress QoS policy to an L2 access interface on a VLL. See To assign ingress and egress QoS policies to a VLL L2 access interface on a 7210 SAS site for more information.

  2. Assign an access ingress/egress QoS policy to an L2 access interface on a VPLS. See To create a VPLS or MVPLS L2 access interface , To create a VPLS or MVPLS B-L2 access interface , and To create a VPLS I-L2 access interface for more information.

  3. Assign an access ingress/egress QoS policy to an L3 access interface on an IES. See To configure an L3 access interface on an IES site for more information.

  4. Assign an access ingress/egress QoS policy to an L3 access interface on a VPRN. See To configure an L3 access interface on a VPRN site for more information.