show service command descriptions
mg-group-using
Syntax
- mg-group-using
Context
- [Tree] show service mg-group-using
Description
This command displays for each MG group the VPRNs which are configured to redirect the GTP-U traffic and the SGi VPRNs which allocate all the IP addresses from an IP pool to the respective MG host VPRN.
Output
The following output example shows the allocation of VPRN routes at the SGi interface to specific MG groups and Show service mg-group-using output fields describes the output fields.
Example output MG groups and VPRNs
# show service mg-group-using
=================================================================
MG Group Using
=================================================================
MG-Group VPRN SGI/No of APNs
-----------------------------------------------------------------
1 vprn101 non-SGI
1 vprn151 non-SGI
1 vprn2001 SGI/2
1 vprn2051 SGI/1
-----------------------------------------------------------------
2 vprn102 non-SGI
2 vprn152 non-SGI
2 vprn2002 SGI/2
2 vprn2052 SGI/1
-----------------------------------------------------------------
3 vprn103 non-SGI
3 vprn153 non-SGI
3 vprn2003 SGI/2
3 vprn2053 SGI/1
-----------------------------------------------------------------
MG-groupEntries found: 3
=================================================================| Label | Description |
|---|---|
| MG-Group | Indicates the MG group that is associated with a specific VPRN instance at the SGi interface. |
| VPRN | Indicates the VPRN instance which is associated with a specific MG Group. |
| SGI/No of APNs | Indicates the number of APNs at the SGi interface which are associated with a specific MG group. |