router command reference

router command descriptions

This section provides the following router command descriptions:

configure router command descriptions

ip-reassembly

Syntax
  • ip-reassembly port-name
  • no ip-reassembly
Context
  • [Tree] configure router interface ip-reassembly
Description

This command configures the virtual ISA used for IP reassembly on this interface.

The no form of this command removes the configuration.

Parameters
port-name
Specifies the port name.
Values: port-id [:context-val] where
  • port-id

    Specifies the configured port ID.

    Values: slot/mda/port or lag-id where

    id – 1 to 200

  • context-val – 1 to 31

monitor-mc-redirect

Syntax
  • monitor-mc-redirect high-threshold high-threshold low-threshold low-threshold
  • no monitor-mc-redirect
Context
  • [Tree] configure router interface monitor-mc-redirect
Description

This command configures to monitor traffic on the interface for the mc-redirect tunnel.

The no form of this command reverts to the default.

Default

monitor-mc-redirect high-threshold 1000 low threshold 500

Parameters
high-threshold
Specifies the high threshold value in number of packets.
Values: 0 to 4294967295
Default: 1000
low-threshold
Specifies the low threshold value in number of packets.
Values: 0 to 4294967295
Default: 500

active-mg

Syntax
  • active-mg vm-id
  • no active-mg
Context
  • [Tree] configure router policy-options policy-statement entry from active-mg
Description

This command configures the route policy entry to include active VMs. An MG group-specific VM is used to advertise and update the next-hop of an active VM during inter-VM failover.

The no form of this command removes the active SM-VM associated with the route policy entry.

Default

no active-mg

Parameters
vm-id
Specifies the SM-VM ID to include for the route policy.
Values: 1 to 20