port commands
configure
— port port
— access
— apply-groups reference
— apply-groups-exclude reference
— egress
— pool named-item
— apply-groups reference
— apply-groups-exclude reference
— ingress
— pool named-item
— apply-groups reference
— apply-groups-exclude reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— connector
— apply-groups reference
— apply-groups-exclude reference
— breakout keyword
— rs-fec-mode keyword
— ddm-events boolean
— description very-long-description
— dist-cpu-protection
— policy reference
— dwdm
— apply-groups reference
— apply-groups-exclude reference
— coherent
— apply-groups reference
— apply-groups-exclude reference
— compatibility keyword
— cpr-window-size number
— dispersion number
— mode keyword
— report-alarm
— hosttx boolean
— mod boolean
— modflt boolean
— netrx boolean
— nettx boolean
— rx-los-reaction keyword
— rx-los-thresh decimal-number
— sweep
— end number
— start number
— target-power decimal-number
— frequency number
— ethernet
— access
— apply-groups reference
— apply-groups-exclude reference
— bandwidth number
— booking-factor number
— egress
— queue-group reference instance-id number
— accounting-policy reference
— apply-groups reference
— apply-groups-exclude reference
— collect-stats boolean
— description description
— host-match
— int-dest-id int-dest-id
— queue-overrides
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— burst-limit (number | keyword)
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— parent
— cir-weight number
— weight number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-policy
— overrides
— scheduler named-item
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— ingress
— queue-group reference
— accounting-policy reference
— apply-groups reference
— apply-groups-exclude reference
— collect-stats boolean
— description description
— queue-overrides
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-policy
— overrides
— scheduler named-item
— apply-groups reference
— apply-groups-exclude reference
— parent
— cir-weight number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— policy-name reference
— accounting-policy reference
— apply-groups reference
— apply-groups-exclude reference
— autonegotiate keyword
— collect-stats boolean
— crc-monitor
— signal-degrade
— multiplier number
— threshold number
— signal-failure
— multiplier number
— threshold number
— window-size number
— dampening
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— half-life number
— max-suppress-time number
— reuse-threshold number
— suppress-threshold number
— discard-rx-pause-frames boolean
— dot1q-etype etype
— dot1x
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— macsec
— apply-groups reference
— apply-groups-exclude reference
— exclude-mac-policy reference
— exclude-protocol
— cdp boolean
— eapol-start boolean
— lacp boolean
— lldp boolean
— ptp boolean
— ubfd boolean
— rx-must-be-encrypted boolean
— sub-port number
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— ca-name reference
— eapol-destination-address mac-address
— encap-match
— all-match boolean
— double-tag double-vlan-encap
— single-tag single-vlan-encap
— untagged boolean
— max-peers number
— max-authentication-requests number
— per-host-authentication
— admin-state keyword
— allowed-source-macs
— mac-address mac-address
— authenticator-init boolean
— port-control keyword
— quiet-period number
— radius-server-policy reference
— radius-server-policy-acct reference
— radius-server-policy-auth reference
— re-authentication
— period number
— server-timeout number
— supplicant-timeout number
— transmit-period number
— tunnel-dot1q boolean
— tunnel-qinq boolean
— tunneling boolean
— down-on-internal-error
— tx-laser keyword
— duplex keyword
— egress
— apply-groups reference
— apply-groups-exclude reference
— port-scheduler-policy
— overrides
— apply-groups reference
— apply-groups-exclude reference
— level number
— apply-groups reference
— apply-groups-exclude reference
— rate
— cir (number | keyword)
— pir (number | keyword)
— max-rate
— rate (number | keyword)
— policy-name reference
— rate number
— encap-type keyword
— hold-time
— down number
— units keyword
— up number
— ingress
— rate number
— lacp-tunnel boolean
— lldp
— apply-groups reference
— apply-groups-exclude reference
— dest-mac keyword
— apply-groups reference
— apply-groups-exclude reference
— notification boolean
— port-id-subtype keyword
— receive boolean
— transmit boolean
— tunnel-nearest-bridge boolean
— tunnel-nearest-customer boolean
— tunnel-nearest-non-tpmr boolean
— tx-mgmt-address keyword
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— tx-tlvs
— port-desc boolean
— sys-cap boolean
— sys-desc boolean
— sys-name boolean
— load-balancing-algorithm keyword
— mac-address mac-address
— min-frame-length number
— mode keyword
— mtu number
— network
— accounting-policy reference
— apply-groups reference
— apply-groups-exclude reference
— collect-stats boolean
— egress
— queue-group reference instance-id number
— accounting-policy reference
— apply-groups reference
— apply-groups-exclude reference
— collect-stats boolean
— description description
— policer-control-policy reference
— queue-overrides
— queue reference
— adaptation-rule
— cir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— cbs (number | keyword)
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-policy
— policy-name reference
— queue-policy reference
— qinq-etype etype
— report-alarm
— alignment-marker-not-locked boolean
— block-not-locked boolean
— duplicate-lane boolean
— frame-not-locked boolean
— high-ber boolean
— local boolean
— remote boolean
— signal-fail boolean
— rs-fec-mode keyword
— speed number
— ssm
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— code-type keyword
— tx-dus boolean
— util-stats-interval number
— xgig keyword
— monitor-oper-group reference
— network
— apply-groups reference
— apply-groups-exclude reference
— egress
— pool named-item
— apply-groups reference
— apply-groups-exclude reference
— otu
— apply-groups reference
— apply-groups-exclude reference
— async-mapping boolean
— fec keyword
— fine-granularity-ber
— signal-degrade
— clear
— multiplier number
— threshold number
— raise
— multiplier number
— threshold number
— signal-failure
— clear
— multiplier number
— threshold number
— raise
— multiplier number
— threshold number
— otu2-lan-data-rate keyword
— path-monitoring
— trail-trace-identifier
— expected
— auto-generated
— bytes string
— string string
— mismatch-reaction keyword
— transmit
— auto-generated
— bytes string
— string string
— payload-structure-identifier
— payload
— expected keyword
— mismatch-reaction keyword
— transmit keyword
— report-alarm
— fec-fail boolean
— fec-sd boolean
— fec-sf boolean
— fec-uncorr boolean
— loc boolean
— lof boolean
— lom boolean
— los boolean
— odu-ais boolean
— odu-bdi boolean
— odu-lck boolean
— odu-oci boolean
— odu-tim boolean
— opu-plm boolean
— otu-ais boolean
— otu-bdi boolean
— otu-ber-sd boolean
— otu-ber-sf boolean
— otu-biae boolean
— otu-iae boolean
— otu-tim boolean
— sd-threshold number
— section-monitoring
— trail-trace-identifier
— expected
— auto-generated
— bytes string
— string string
— mismatch-reaction keyword
— transmit
— auto-generated
— bytes string
— string string
— sf-sd-method keyword
— sf-threshold number
— transceiver
— apply-groups reference
— apply-groups-exclude reference
— digital-coherent-optics boolean
— optical-line-system
— egress-amplifier-gain decimal-number
port command descriptions
port [port-id] port
[port-id] port
access
egress
| Synopsis | Enter the egress context | |
| Context | configure port port access egress | |
| Tree | egress | |
Description | Commands in this context specify the configuration of access egress buffer pools to determine how a CBS-reserved space is handled and the strategy for utilizing the shared buffer space. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
pool [name] named-item
[name] named-item
ingress
pool [name] named-item
[name] named-item
admin-state keyword
| Synopsis | Administrative state of the port | |
| Context | configure port port admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
connector
breakout keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Port breakout of the transceiver used in the connector | |
| Context | configure port port connector breakout keyword | |
| Tree | breakout | |
Description | This command defines the port breakout of the transceiver used in the connector. Specifying the type triggers the creation of the ports that will be accessible under the connector. When a QSFP28 connector uses an SFP+ optical module with the QSFP28-to-SFP+/SFP28 adapter, set this command to c1-10g. This value indicates the presence of the adapter. For some connectors (for example, QSFPDD), there can be overlap in the breakout for different host interfaces. The same port breakout can be supported on an optical modules that uses a host interface of CAUI-4 as another optical module that uses 100GAUI-2. To distinguish from the CAUI-4 host interface, the "-aui2" suffix is used on some breakout options. This is only necessary where there is overlap. In other situations, SR OS sets the host interface correctly without requiring the distinction in the breakout option. | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 | |
rs-fec-mode keyword
| Synopsis | RS-FEC mode for the Ethernet connector | |
| Context | configure port port connector rs-fec-mode keyword | |
| Tree | rs-fec-mode | |
Description | This command specifies the RS-FEC (Reed-Solomon Forward Error Correction) mode on the Ethernet connector. See "Forward Error Correction" in the 7705 SAR Gen 2 Interface Configuration Guide for more information about FEC settings. | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
ddm-events boolean
| Synopsis | Enable Digital Diagnostic Monitoring (DDM) events | |
| Context | configure port port ddm-events boolean | |
| Tree | ddm-events | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
description very-long-description
| Synopsis | Text description | |
| Context | configure port port description very-long-description | |
| Tree | description | |
| String length | 1 to 255 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
dist-cpu-protection
| Synopsis | Enter the dist-cpu-protection context | |
| Context | configure port port dist-cpu-protection | |
| Tree | dist-cpu-protection | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
policy reference
| Synopsis | Distributed CPU protection policy name | |
| Context | configure port port dist-cpu-protection policy reference | |
| Tree | policy | |
Reference | configure system security dist-cpu-protection policy named-item | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
dwdm
coherent
compatibility keyword
| Synopsis | Optical mode and rate of operation | |
| Context | configure port port dwdm coherent compatibility keyword | |
| Tree | compatibility | |
| Options | ||
| Default | long-haul | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
cpr-window-size number
| Synopsis | Window size for the carrier phase recovery | |
| Context | configure port port dwdm coherent cpr-window-size number | |
| Tree | cpr-window-size | |
Description | This command configures the window size for the carrier phase recovery. When this command is changed, the link bounces because the receiver needs to be reconfigured. | |
| Range | 2 | 4 | 8 | 16 | 32 | 64 | |
| Units | symbols | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
dispersion number
| Synopsis | Residual chromatic dispersion compensation | |
| Context | configure port port dwdm coherent dispersion number | |
| Tree | dispersion | |
Description | This command specifies the residual chromatic dispersion compensation when the coherent receiver is operating in manual dispersion control mode. | |
| Range | -50000 to 50000 | |
| Units | picoseconds per nanometer | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
mode keyword
report-alarm
| Synopsis | Enter the report-alarm context | |
| Context | configure port port dwdm coherent report-alarm | |
| Tree | report-alarm | |
Description | Commands in this context configure the alarms reported for the coherent module. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
hosttx boolean
mod boolean
modflt boolean
netrx boolean
nettx boolean
rx-los-reaction keyword
| Synopsis | Reaction to an RX LOS | |
| Context | configure port port dwdm coherent rx-los-reaction keyword | |
| Tree | rx-los-reaction | |
Description | This command configures the reaction to an RX LOS. Note: If this command is disabled for some coherent DWDM transceivers, the transceiver only reports local fault alarms when an RX LOS condition occurs; however, the port returns to service faster after the LOS condition is cleared. For these transceivers, if this command is enabled, there is better visibility of individual alarms (for example, signal-fail, local fault, no-am-lock), but the port takes longer to service after the LOS condition is cleared. | |
| Options | ||
| Default | squelch | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
rx-los-thresh decimal-number
| Synopsis | Average input power LOS threshold | |
| Context | configure port port dwdm coherent rx-los-thresh decimal-number | |
| Tree | rx-los-thresh | |
| Range | -30 to -13 | |
| Units | decibel-milliwatts | |
| Default | -23 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
sweep
| Synopsis | Enter the sweep context | |
| Context | configure port port dwdm coherent sweep | |
| Tree | sweep | |
Description | Commands in this context allow users to configure the dispersion sweep start and end values for the automatic mode of coherent control. If the user knows the approximate or theoretical residual dispersion of the link, these commands can be used to limit the range of sweeping for the automatic control mode and therefore achieve a faster link up. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
end number
start number
target-power decimal-number
| Synopsis | Average output power target for the port | |
| Context | configure port port dwdm coherent target-power decimal-number | |
| Tree | target-power | |
| Range | -20 to 3 | |
| Units | decibel-milliwatts | |
| Default | 1 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
frequency number
| Synopsis | Center frequency for tunable DWDM optical interface | |
| Context | configure port port dwdm frequency number | |
| Tree | frequency | |
Description | This command configures the center frequency to use for a tunable DWDM optical interface. This command can be used to specify any frequency in the C band. To set the DWDM frequency, the port must be a physical port and the provisioned MDA type must have DWDM tunable optics (for example, p1-100g-tun-b), or the MDA must support the option of tunable DWDM optic modules. This command replaces the configure port dwdm channel command. | |
| Range | 191100000 to 196150000 | |
| Units | megahertz | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
ethernet
| Synopsis | Enter the ethernet context | |
| Context | configure port port ethernet | |
| Tree | ethernet | |
Description | Commands in this context configure Ethernet port attributes. This context can only be used when configuring Fast Ethernet, Gigabit, or 10-Gb Ethernet LAN ports on an appropriate MDA. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
access
bandwidth number
booking-factor number
| Synopsis | Booking factor applied to the Ethernet port | |
| Context | configure port port ethernet access booking-factor number | |
| Tree | booking-factor | |
| Range | 1 to 1000 | |
| Default | 100 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
egress
queue-group [queue-group-name] reference instance-id number
| Synopsis | Enter the queue-group list instance | |
| Context | configure port port ethernet access egress queue-group reference instance-id number | |
| Tree | queue-group | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[queue-group-name] reference
| Synopsis | Queue group name | |
| Context | configure port port ethernet access egress queue-group reference instance-id number | |
| Tree | queue-group | |
Reference | configure qos queue-group-templates egress queue-group named-item | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
instance-id number
| Synopsis | Instance ID for the egress queue group | |
| Context | configure port port ethernet access egress queue-group reference instance-id number | |
| Tree | queue-group | |
| Range | 1 to 65535 | |
| MD-CLI default | 1 | |
|
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
accounting-policy reference
| Synopsis | Accounting policy for the Ethernet port | |
| Context | configure port port ethernet access egress queue-group reference instance-id number accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
collect-stats boolean
| Synopsis | Collect accounting and statistical data | |
| Context | configure port port ethernet access egress queue-group reference instance-id number collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
description description
| Synopsis | Text description | |
| Context | configure port port ethernet access egress queue-group reference instance-id number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
host-match
| Synopsis | Enter the host-match context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number host-match | |
| Tree | host-match | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
int-dest-id [destination-string] int-dest-id
| Synopsis | Add a list entry for int-dest-id | |
| Context | configure port port ethernet access egress queue-group reference instance-id number host-match int-dest-id int-dest-id | |
| Tree | int-dest-id | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[destination-string] int-dest-id
| Synopsis | Host match destination ID | |
| Context | configure port port ethernet access egress queue-group reference instance-id number host-match int-dest-id int-dest-id | |
| Tree | int-dest-id | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
queue-overrides
| Synopsis | Enter the queue-overrides context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides | |
| Tree | queue-overrides | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
queue [queue-id] reference
| Synopsis | Enter the queue list instance | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference | |
| Tree | queue | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[queue-id] reference
| Synopsis | Queue ID | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference | |
| Tree | queue | |
Reference | configure qos queue-group-templates egress queue-group named-item queue number | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
burst-limit (number | keyword)
| Synopsis | Override for the shaping burst size for the queue | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
cbs (number | keyword)
| Synopsis | CBS for the template queue | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 1048576 | |
| Units | kilobytes | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
drop-tail
| Synopsis | Enter the drop-tail context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference drop-tail | |
| Tree | drop-tail | |
Description | Commands in this context configure queue drop tail commands. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
low
| Synopsis | Enter the low context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference drop-tail low | |
| Tree | low | |
Description | Commands in this context configure the queue low drop tail commands. The low drop tail defines the queue depth beyond which the out-of-profile packets are not accepted into the queue and discarded. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
Description | This command overrides the low queue drop tail as a percentage reduction from the MBS of the queue. For example, if a queue has an MBS of 600 kbytes and this percentage is configured to be 30% for the low drop tail, the low drop tail is set to 420 kbytes and the out-of-profile packets are not accepted into the queue if its depth is greater than this value, and is therefore discarded. | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
mbs (number | keyword)
| Synopsis | MBS for the template queue | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 1073741824 | |
| Units | bytes | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
parent
| Synopsis | Enter the parent context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference parent | |
| Tree | parent | |
Description | Commands in this context define the weight of the queue treatment by the parent scheduler that further governs the available bandwidth given to the queue, aside from the queue PIR setting. When multiple schedulers or queues share a child status with the parent scheduler, the weight or level commands define how the queue contends with the other children for the parent bandwidth. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir-weight number
| Synopsis | CIR that overrides the parent for the queue group | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
weight number
| Synopsis | PIR that overrides the parent for the queue group | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference percent-rate | |
| Tree | percent-rate | |
Description | Commands in this context specify percent rates. These commands are ignored for egress HSQ queue group queues, which are attached to an HS WRR group within an associated HS attachment policy. In this case, the configuration of the percent rate is performed under the hs-wrr-group command within the egress queue group template. | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir decimal-number
| Synopsis | CIR for the queue | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Units | percent | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
pir decimal-number
| Synopsis | PIR for the queue | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Units | percent | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
rate
| Synopsis | Enter the rate context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir (number | keyword)
| Synopsis | CIR for the queue | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference rate cir (number | keyword) | |
| Tree | cir | |
Description | This command specifies the administrative CIR used by the queue. When the rate command is executed, a CIR setting is optional. Fractional values are not allowed and must be given as a positive integer. The CIR defines the rate at which the system prioritizes the queue over other queues competing for the same bandwidth. In-profile then out-of-profile packets are preferentially queued by the system at egress and at subsequent next hop nodes where the packet can traverse. To be properly handled throughout the network, the packets must be marked accordingly for profiling at each hop. The CIR can be used by the queue’s parent cir-level and cir-weight commands to define the amount of bandwidth considered to be committed for the child queue during bandwidth allocation by the parent scheduler. | |
| Range | 0 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
pir (number | keyword)
| Synopsis | PIR for the queue | |
| Context | configure port port ethernet access egress queue-group reference instance-id number queue-overrides queue reference rate pir (number | keyword) | |
| Tree | pir | |
Description | This command specifies the administrative PIR used by the queue. When the rate command is executed, a valid PIR setting must be explicitly defined. Fractional values are not allowed and must be given as a positive integer. The actual PIR rate is dependent on the queue’s adaptation-rule commands and the actual hardware where the queue is provisioned. The PIR defines the maximum rate that the queue can transmit packets out an egress interface (for SAP egress queues). Defining a PIR does not necessarily guarantee that the queue can transmit at the intended rate. The actual rate sustained by the queue can be limited by oversubscription factors or available egress bandwidth. | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy | |
| Tree | scheduler-policy | |
Description | Commands in this context configure a scheduler policy for the egress queue group. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
overrides
| Synopsis | Enter the overrides context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy overrides | |
| Tree | overrides | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
scheduler [scheduler-name] named-item
| Synopsis | Enter the scheduler list instance | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy overrides scheduler named-item | |
| Tree | scheduler | |
Description | Commands in this context are used to override specific attributes of the specified scheduler name. A scheduler defines bandwidth controls that limit each child (other schedulers and queues) associated with the scheduler. Scheduler objects are created within the hierarchical tiers of the policy. It is assumed that each scheduler created has queues or other schedulers defined as child associations. The scheduler can be a child which takes bandwidth from a scheduler in a higher tier. A total of 32 schedulers can be created within a single scheduler policy with no restriction on the distribution between the tiers. The scheduler name must exist in the applied scheduler policy. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[scheduler-name] named-item
| Synopsis | Scheduler name | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy overrides scheduler named-item | |
| Tree | scheduler | |
Description | This command specifies the scheduler name. Valid names consist of any string composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
parent
| Synopsis | Enter the parent context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy overrides scheduler named-item parent | |
| Tree | parent | |
Description | Commands in this context are used to override the scheduler's parent weight and CIR weight. The weights apply to the associated level or CIR level configured in the applied scheduler policy. The override weights are ignored if the scheduler does not have a parent command configured in the scheduler policy. This allows the parent of the scheduler to be removed from the scheduler policy without having to remove all of the queue group overrides. If the parent scheduler does not exist, causing the configured scheduler to be fostered on an egress port scheduler, then the override weights are ignored. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir-weight number
| Synopsis | CIR that overrides the parent | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy overrides scheduler named-item parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
weight number
| Synopsis | PIR that overrides the parent | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy overrides scheduler named-item parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
rate
| Synopsis | Enter the rate context | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy overrides scheduler named-item rate | |
| Tree | rate | |
Description | Commands in this context override specific attributes of the specified scheduler rate. The actual operating rate of the scheduler is limited by bandwidth constraints other than its maximum rate. The scheduler's parent scheduler may not have the available bandwidth to meet the scheduler's needs. The bandwidth available to the parent scheduler could be allocated to other child schedulers or the child queues on the parent scheduler may be based on a higher priority. The children of the scheduler may not need the maximum rate available to the scheduler due to an insufficient offered load or limits to their own maximum rates. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir (number | keyword)
| Synopsis | CIR for the scheduler | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy overrides scheduler named-item rate cir (number | keyword) | |
| Tree | cir | |
Description | This command specifies the CIR. When a parent is associated with the scheduler, this command provides the amount of bandwidth to be considered during the parent scheduler's within-cir distribution phase. When the rate command is executed, a valid PIR setting must be explicitly defined before specifying the CIR. If the CIR is set to max, the CIR rate is set to infinity. The sum keyword specifies that the CIR be used as the summed CIR values of the children schedulers, policers, or queues. | |
| Range | 0 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
pir (number | keyword)
| Synopsis | PIR for the scheduler | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy overrides scheduler named-item rate pir (number | keyword) | |
| Tree | pir | |
Description | This command specifies the PIR. When the rate command is executed, a valid PIR setting must be explicitly defined. Any other value results in an error without modifying the current PIR rate. | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure port port ethernet access egress queue-group reference instance-id number scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy named-item | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
ingress
queue-group [queue-group-name] reference
| Synopsis | Enter the queue-group list instance | |
| Context | configure port port ethernet access ingress queue-group reference | |
| Tree | queue-group | |
Description | Commands in this context create an ingress queue group on the Ethernet port. Queue groups created on access ports are used as an alternative queue destination for SAPs. Queue groups can be created on both access and network oriented ports. When the port is in access mode, the queue groups must be created within the port access node. Access ingress queue groups can only be used by ingress SAP forwarding classes and only a single ingress queue group per port is supported. When the queue group is created in an ingress port context, the queue group name must be an existing ingress queue group template. Two ingress queue groups with the same name cannot be created on the same port. When creating a queue group, the system will attempt to allocate queue resources based on the queues defined in the queue group template. If the appropriate queue resources do not currently exist, the queue group will not be created. Ingress port queue groups do not support shared-queuing or multipoint shared queuing behavior. A port queue group cannot be removed from the port when a forwarding class is currently redirected to the group. All forwarding class redirections must first be removed prior to removing the queue group. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[queue-group-name] reference
| Synopsis | Queue group name | |
| Context | configure port port ethernet access ingress queue-group reference | |
| Tree | queue-group | |
Description | This command specifies the queue group name. The specified queue group name must exist as an ingress or egress queue group template depending on the ingress or egress context of the port queue group. Only a single queue group may be created on an ingress port. | |
Reference | configure qos queue-group-templates ingress queue-group named-item | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
accounting-policy reference
| Synopsis | Accounting policy for the Ethernet port | |
| Context | configure port port ethernet access ingress queue-group reference accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
collect-stats boolean
| Synopsis | Collect accounting and statistical data | |
| Context | configure port port ethernet access ingress queue-group reference collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
description description
| Synopsis | Text description | |
| Context | configure port port ethernet access ingress queue-group reference description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
queue-overrides
| Synopsis | Enter the queue-overrides context | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides | |
| Tree | queue-overrides | |
Description | Commands in this context define queue command overrides for each queue within the queue group. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
queue [queue-id] reference
| Synopsis | Enter the queue list instance | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference | |
| Tree | queue | |
Description | Commands in this context associate a queue for use in a queue group template. The template queue is created on each queue group object that is created with the queue group template name. Each queue is identified within the template by a queue ID number. The template ensures that all queue groups created with the template’s name have the same queue IDs, providing a uniform structure for the forwarding class redirection commands in the SAP egress QoS policies. The queue commands can be individually changed for each queue in each queue group using per queue overrides. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[queue-id] reference
| Synopsis | Queue ID for the queue group template | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference | |
| Tree | queue | |
Reference | configure qos queue-group-templates ingress queue-group named-item queue number | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cbs (number | keyword)
| Synopsis | CBS for the template queue | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 1048576 | |
| Units | kilobytes | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
drop-tail
| Synopsis | Enter the drop-tail context | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference drop-tail | |
| Tree | drop-tail | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
low
| Synopsis | Enter the low context | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference drop-tail low | |
| Tree | low | |
Description | Commands in this context configure the queue low drop tail commands. The low drop tail defines the queue depth beyond which out-of-profile packets are accepted into the queue and discarded. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
Description | This command overrides the low queue drop tail as a percentage reduction from the MBS of the queue. For example, if a queue has an MBS of 600 kbytes and this percentage is configured to be 30% for the low drop tail, the low drop tail is set to 420 kbytes and the out-of-profile packets are not accepted into the queue if its depth is greater than this value, and is therefore discarded. | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
mbs (number | keyword)
| Synopsis | MBS for the template queue | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 1073741824 | |
| Units | bytes | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
rate
| Synopsis | Enter the rate context | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference rate | |
| Tree | rate | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir (number | keyword)
| Synopsis | CIR for the queue | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference rate cir (number | keyword) | |
| Tree | cir | |
Description | This command specifies the administrative CIR used by the queue. When the rate command is executed, a CIR setting is optional. Fractional values are not allowed and must be given as a positive integer. The CIR defines the rate at which the system prioritizes the queue over other queues competing for the same bandwidth. In-profile then out-of-profile packets are preferentially queued by the system at egress and at subsequent next hop nodes where the packet can traverse. To be properly handled throughout the network, the packets must be marked accordingly for profiling at each hop. The CIR can be used by the queue’s parent cir-level and cir-weight commands to define the amount of bandwidth considered to be committed for the child queue during bandwidth allocation by the parent scheduler. | |
| Range | 0 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
pir (number | keyword)
| Synopsis | PIR for the queue | |
| Context | configure port port ethernet access ingress queue-group reference queue-overrides queue reference rate pir (number | keyword) | |
| Tree | pir | |
Description | This command specifies the administrative PIR used by the queue. When the rate command is executed, a valid PIR setting must be explicitly defined. Fractional values are not allowed and must be given as a positive integer. The actual PIR rate is dependent on the queue’s adaptation-rule commands and the actual hardware where the queue is provisioned. The PIR defines the maximum rate that the queue can transmit packets out an egress interface (for SAP egress queues). Defining a PIR does not necessarily guarantee that the queue can transmit at the intended rate. The actual rate sustained by the queue can be limited by oversubscription factors or available egress bandwidth. | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure port port ethernet access ingress queue-group reference scheduler-policy | |
| Tree | scheduler-policy | |
Description | Commands in this context configure a scheduler policy for the ingress queue group. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
overrides
| Synopsis | Enter the overrides context | |
| Context | configure port port ethernet access ingress queue-group reference scheduler-policy overrides | |
| Tree | overrides | |
Description | Commands in this context specify the set of attributes specifying values specific to the given queue-group instance. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
scheduler [scheduler-name] named-item
| Synopsis | Enter the scheduler list instance | |
| Context | configure port port ethernet access ingress queue-group reference scheduler-policy overrides scheduler named-item | |
| Tree | scheduler | |
Description | Commands in this context are used to override specific attributes of the specified scheduler name. A scheduler defines bandwidth controls that limit each child (other schedulers and queues) associated with the scheduler. Scheduler objects are created within the hierarchical tiers of the policy. It is assumed that each scheduler created has queues or other schedulers defined as child associations. The scheduler can be a child which takes bandwidth from a scheduler in a higher tier. A total of 32 schedulers can be created within a single scheduler policy with no restriction on the distribution between the tiers. The scheduler name must exist in the applied scheduler policy. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[scheduler-name] named-item
| Synopsis | Scheduler name | |
| Context | configure port port ethernet access ingress queue-group reference scheduler-policy overrides scheduler named-item | |
| Tree | scheduler | |
Description | This command specifies the scheduler name. Valid names consist of any string composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
parent
| Synopsis | Enter the parent context | |
| Context | configure port port ethernet access ingress queue-group reference scheduler-policy overrides scheduler named-item parent | |
| Tree | parent | |
Description | Commands in this context are used to override the scheduler's parent weight and CIR weight. The weights apply to the associated level or CIR level configured in the applied scheduler policy. The override weights are ignored if the scheduler does not have a parent command configured in the scheduler policy. This allows the parent of the scheduler to be removed from the scheduler policy without having to remove all of the queue group overrides. If the parent scheduler does not exist, causing the configured scheduler to be fostered on an egress port scheduler, then the override weights are ignored. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir-weight number
| Synopsis | CIR that overrides the parent | |
| Context | configure port port ethernet access ingress queue-group reference scheduler-policy overrides scheduler named-item parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
weight number
rate
| Synopsis | Enter the rate context | |
| Context | configure port port ethernet access ingress queue-group reference scheduler-policy overrides scheduler named-item rate | |
| Tree | rate | |
Description | Commands in this context override specific attributes of the specified scheduler rate. The actual operating rate of the scheduler is limited by bandwidth constraints other than its maximum rate. The scheduler's parent scheduler may not have the available bandwidth to meet the scheduler's needs. The bandwidth available to the parent scheduler could be allocated to other child schedulers or the child queues on the parent scheduler may be based on a higher priority. The children of the scheduler may not need the maximum rate available to the scheduler due to an insufficient offered load or limits to their own maximum rates. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir (number | keyword)
| Synopsis | CIR for the scheduler | |
| Context | configure port port ethernet access ingress queue-group reference scheduler-policy overrides scheduler named-item rate cir (number | keyword) | |
| Tree | cir | |
Description | This command specifies the CIR. When a parent is associated with the scheduler, this command provides the amount of bandwidth to be considered during the parent scheduler's within-cir distribution phase. When the rate command is executed, a valid PIR setting must be explicitly defined before specifying the CIR. If the CIR is set to max, the CIR rate is set to infinity. The sum keyword specifies that the CIR be used as the summed CIR values of the children schedulers, policers, or queues. | |
| Range | 0 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
pir (number | keyword)
| Synopsis | PIR for the scheduler | |
| Context | configure port port ethernet access ingress queue-group reference scheduler-policy overrides scheduler named-item rate pir (number | keyword) | |
| Tree | pir | |
Description | This command specifies the PIR. When the rate command is executed, a valid PIR setting must be explicitly defined. Any other value results in an error without modifying the current PIR rate. | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
policy-name reference
| Synopsis | Scheduler policy name | |
| Context | configure port port ethernet access ingress queue-group reference scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy named-item | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
accounting-policy reference
| Synopsis | Accounting policy for the Ethernet port | |
| Context | configure port port ethernet accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
autonegotiate keyword
| Synopsis | Speed and duplex autonegotiation on the Ethernet port | |
| Context | configure port port ethernet autonegotiate keyword | |
| Tree | autonegotiate | |
Description | This command enables speed and duplex autonegotiation on Fast Ethernet ports and enables far-end fault indicator support on Gb ports. When autonegotiation is enabled on a port, the link attempts to automatically negotiate the link speed and duplex commands. If autonegotiation is enabled, the configured duplex and speed commands are ignored. When autonegotiation is disabled on a port, the port does not attempt to autonegotiate and will only operate at the speed and duplex command settings configured for the port. Note that disabling autonegotiation on Gb ports is not allowed as the IEEE 802.3 specification for Gb Ethernet requires autonegotiation be enabled for far end fault indication. It is required for autonegotiation to be limited for ports in a LAG to guarantee a specific port speed. | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
collect-stats boolean
| Synopsis | Collect accounting and statistical data | |
| Context | configure port port ethernet collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
crc-monitor
| Synopsis | Enter the crc-monitor context | |
| Context | configure port port ethernet crc-monitor | |
| Tree | crc-monitor | |
Description | Commands in this context configure Ethernet Cyclic Redundancy Check (CRC) monitoring. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
signal-degrade
| Synopsis | Enter the signal-degrade context | |
| Context | configure port port ethernet crc-monitor signal-degrade | |
| Tree | signal-degrade | |
Description | Commands in this context specify the error rate at which to declare the Signal Degrade (SD) condition on an Ethernet interface. The value represents M*10E-N, which is the ratio of errored frames over the total frames received over W seconds of the sliding window. The CRC errors on the interface are sampled once per second. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
multiplier number
| Synopsis | SD multiplier | |
| Context | configure port port ethernet crc-monitor signal-degrade multiplier number | |
| Tree | multiplier | |
| Range | 1 to 9 | |
| Default | 1 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
threshold number
| Synopsis | SD threshold | |
| Context | configure port port ethernet crc-monitor signal-degrade threshold number | |
| Tree | threshold | |
| Range | 1 to 9 | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
signal-failure
| Synopsis | Enter the signal-failure context | |
| Context | configure port port ethernet crc-monitor signal-failure | |
| Tree | signal-failure | |
Description | Commands in this context specify the error rate at which to declare the Signal Fail (SF) condition on an Ethernet interface. The value represents M*10E-N errored frames over total frames received over W seconds of the sliding window. The CRC errors on the interface are sampled once per second. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
multiplier number
| Synopsis | SF multiplier | |
| Context | configure port port ethernet crc-monitor signal-failure multiplier number | |
| Tree | multiplier | |
| Range | 1 to 9 | |
| Default | 1 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
threshold number
| Synopsis | SF threshold | |
| Context | configure port port ethernet crc-monitor signal-failure threshold number | |
| Tree | threshold | |
| Range | 1 to 9 | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
window-size number
| Synopsis | Sliding window size over which errors are measured | |
| Context | configure port port ethernet crc-monitor window-size number | |
| Tree | window-size | |
Description | This command specifies the sliding window size over which the Ethernet frames are sampled to detect SF or SD conditions. The command is used jointly with the signal-failure and the signal-degrade commands to configure the sliding window size. | |
| Range | 5 to 60 | |
| Units | seconds | |
| Default | 10 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
dampening
admin-state keyword
| Synopsis | Administrative state of exponential port dampening | |
| Context | configure port port ethernet dampening admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
half-life number
| Synopsis | Half-life decay time | |
| Context | configure port port ethernet dampening half-life number | |
| Tree | half-life | |
Description | This command specifies the time that must pass before penalties decay to one-half the initial amount. The half-life and maximum suppression time values must be set at the same time and the ratio of the maximum suppression time and half-life must be less than or equal to 49 and greater than or equal to one. | |
| Range | 1 to 2000 | |
| Units | seconds | |
| Default | 5 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
max-suppress-time number
| Synopsis | Maximum suppression time | |
| Context | configure port port ethernet dampening max-suppress-time number | |
| Tree | max-suppress-time | |
Description | This command specifies the maximum suppression time, which is the time it can take after the physical link comes up before the worst case accumulated penalties have decayed to the reuse threshold. The maximum penalty is derived from the maximum suppression time, half life, and reuse threshold, using the following equation: maximum penalty = (reuse threshold) 2 expo:(maximum suppression time/half life) The half life and maximum suppression time values must be set at the same time and the ratio of the maximum suppression time and half life must be less than or equal to 49 and greater than or equal to one. | |
| Range | 1 to 43200 | |
| Units | seconds | |
| Default | 20 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
reuse-threshold number
| Synopsis | Threshold which port-up state is no longer suppressed | |
| Context | configure port port ethernet dampening reuse-threshold number | |
| Tree | reuse-threshold | |
Description | This command specifies the threshold at which the port-up state is no longer suppressed, after the port has been in a suppressed state and the accumulated penalties decay drops below this threshold. The reuse threshold value must be less than the suppress threshold value. | |
| Range | 1 to 20000 | |
| Units | penalties | |
| Default | 1000 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
suppress-threshold number
| Synopsis | Threshold at which the port-up state is suppressed | |
| Context | configure port port ethernet dampening suppress-threshold number | |
| Tree | suppress-threshold | |
Description | This command specifies the threshold at which the port-up state is suppressed until the accumulated penalties drop below the reuse threshold. The reuse threshold value must be less than the suppress threshold value. | |
| Range | 1 to 20000 | |
| Units | penalties | |
| Default | 2000 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
discard-rx-pause-frames boolean
| Synopsis | Discard received pause frames | |
| Context | configure port port ethernet discard-rx-pause-frames boolean | |
| Tree | discard-rx-pause-frames | |
Description | When configured to true, the router discards the received pause frames, which are used for local link flow control. When configured to false, pause frames are processed upon receipt, and the transmit side of the receiving port pauses its transmissions. | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
dot1q-etype etype
| Synopsis | Ethertype expected if port encapsulation type is dot1q | |
| Context | configure port port ethernet dot1q-etype etype | |
| Tree | dot1q-etype | |
Description | This command specifies the Ethertype expected when the port encapsulation type is dot1q. Dot1q encapsulation is supported only on Ethernet interfaces. | |
| Default | 33024 | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
dot1x
admin-state keyword
| Synopsis | Administrative state of dot1x packet extraction to CPM | |
| Context | configure port port ethernet dot1x admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | enable | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
macsec
exclude-mac-policy reference
| Synopsis | MAC policy excluded from MACsec encryption | |
| Context | configure port port ethernet dot1x macsec exclude-mac-policy reference | |
| Tree | exclude-mac-policy | |
Reference | configure macsec mac-policy number | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
exclude-protocol
| Synopsis | Enter the exclude-protocol context | |
| Context | configure port port ethernet dot1x macsec exclude-protocol | |
| Tree | exclude-protocol | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cdp boolean
eapol-start boolean
| Synopsis | Disable MACsec for all packets on the link for EAPOL | |
| Context | configure port port ethernet dot1x macsec exclude-protocol eapol-start boolean | |
| Tree | eapol-start | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
lacp boolean
lldp boolean
ptp boolean
ubfd boolean
rx-must-be-encrypted boolean
| Synopsis | Drop all port traffic that is not MACsec-secured | |
| Context | configure port port ethernet dot1x macsec rx-must-be-encrypted boolean | |
| Tree | rx-must-be-encrypted | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
sub-port [sub-port-id] number
[sub-port-id] number
admin-state keyword
| Synopsis | Administrative state of MACsec on the port | |
| Context | configure port port ethernet dot1x macsec sub-port number admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
ca-name reference
eapol-destination-address mac-address
| Synopsis | EAPOL destination MAC address | |
| Context | configure port port ethernet dot1x macsec sub-port number eapol-destination-address mac-address | |
| Tree | eapol-destination-address | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
encap-match
| Synopsis | Enter the encap-match context | |
| Context | configure port port ethernet dot1x macsec sub-port number encap-match | |
| Tree | encap-match | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
all-match boolean
| Synopsis | Match and encrypt all traffic patterns | |
| Context | configure port port ethernet dot1x macsec sub-port number encap-match all-match boolean | |
| Tree | all-match | |
| Default | true | |
Notes | The following elements are part of a choice: all-match, double-tag, single-tag, or untagged. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
double-tag double-vlan-encap
| Synopsis | QinQ double tag traffic pattern to match | |
| Context | configure port port ethernet dot1x macsec sub-port number encap-match double-tag double-vlan-encap | |
| Tree | double-tag | |
| String length | 1 to 11 | |
Notes | The following elements are part of a choice: all-match, double-tag, single-tag, or untagged. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
single-tag single-vlan-encap
| Synopsis | Dot1q single tag traffic pattern to match | |
| Context | configure port port ethernet dot1x macsec sub-port number encap-match single-tag single-vlan-encap | |
| Tree | single-tag | |
| String length | 1 to 11 | |
Notes | The following elements are part of a choice: all-match, double-tag, single-tag, or untagged. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
untagged boolean
max-peers number
|
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
| Synopsis | Maximum number of peers supported on the port | |
| Context | configure port port ethernet dot1x macsec sub-port number max-peers number | |
| Tree | max-peers | |
| Range | 1 to 32 | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 | |
max-authentication-requests number
| Synopsis | Maximum number of RADIUS retries | |
| Context | configure port port ethernet dot1x max-authentication-requests number | |
| Tree | max-authentication-requests | |
| Range | 1 to 10 | |
| Default | 2 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
per-host-authentication
| Synopsis | Enter the per-host-authentication context | |
| Context | configure port port ethernet dot1x per-host-authentication | |
| Tree | per-host-authentication | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
admin-state keyword
| Synopsis | Administrative state of per-host authentication | |
| Context | configure port port ethernet dot1x per-host-authentication admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
allowed-source-macs
| Synopsis | Enter the allowed-source-macs context | |
| Context | configure port port ethernet dot1x per-host-authentication allowed-source-macs | |
| Tree | allowed-source-macs | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
mac-address [mac] mac-address
| Synopsis | Add a list entry for mac-address | |
| Context | configure port port ethernet dot1x per-host-authentication allowed-source-macs mac-address mac-address | |
| Tree | mac-address | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[mac] mac-address
| Synopsis | Source MAC address of a host selected for authentication | |
| Context | configure port port ethernet dot1x per-host-authentication allowed-source-macs mac-address mac-address | |
| Tree | mac-address | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
authenticator-init boolean
| Synopsis | Initiate per-host authentication | |
| Context | configure port port ethernet dot1x per-host-authentication authenticator-init boolean | |
| Tree | authenticator-init | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
port-control keyword
| Synopsis | 802.1x authentication mode | |
| Context | configure port port ethernet dot1x port-control keyword | |
| Tree | port-control | |
| Options | ||
| Default | force-authorized | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
quiet-period number
| Synopsis | Time between two sessions when no EAPOL frames are sent | |
| Context | configure port port ethernet dot1x quiet-period number | |
| Tree | quiet-period | |
| Range | 1 to 3600 | |
| Units | seconds | |
| Default | 60 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
radius-server-policy reference
| Synopsis | RADIUS server policy name | |
| Context | configure port port ethernet dot1x radius-server-policy reference | |
| Tree | radius-server-policy | |
Reference | configure aaa radius server-policy named-item | |
Notes | The following elements are part of a choice: radius-server-policy or (radius-server-policy-acct and radius-server-policy-auth). | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
radius-server-policy-acct reference
| Synopsis | RADIUS server policy name for accounting | |
| Context | configure port port ethernet dot1x radius-server-policy-acct reference | |
| Tree | radius-server-policy-acct | |
Reference | configure aaa radius server-policy named-item | |
Notes | The following elements are part of a choice: radius-server-policy or (radius-server-policy-acct and radius-server-policy-auth). | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
radius-server-policy-auth reference
| Synopsis | RADIUS server policy name for authentication | |
| Context | configure port port ethernet dot1x radius-server-policy-auth reference | |
| Tree | radius-server-policy-auth | |
Reference | configure aaa radius server-policy named-item | |
Notes | The following elements are part of a choice: radius-server-policy or (radius-server-policy-acct and radius-server-policy-auth). | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
re-authentication
| Synopsis | Enable the re-authentication context | |
| Context | configure port port ethernet dot1x re-authentication | |
| Tree | re-authentication | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
period number
server-timeout number
| Synopsis | Wait time for a response from the RADIUS server | |
| Context | configure port port ethernet dot1x server-timeout number | |
| Tree | server-timeout | |
| Range | 1 to 300 | |
| Units | seconds | |
| Default | 30 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
supplicant-timeout number
| Synopsis | Wait time for a response to EAPOL messages | |
| Context | configure port port ethernet dot1x supplicant-timeout number | |
| Tree | supplicant-timeout | |
| Range | 1 to 300 | |
| Units | seconds | |
| Default | 30 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
transmit-period number
| Synopsis | Time after which a new EAPOL request message is sent | |
| Context | configure port port ethernet dot1x transmit-period number | |
| Tree | transmit-period | |
| Range | 1 to 3600 | |
| Units | seconds | |
| Default | 30 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
tunnel-dot1q boolean
| Synopsis | Enable dot1x tunneling for 802.1q tagged packets | |
| Context | configure port port ethernet dot1x tunnel-dot1q boolean | |
| Tree | tunnel-dot1q | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
tunnel-qinq boolean
| Synopsis | Enable dot1x tunneling for QinQ tagged packets | |
| Context | configure port port ethernet dot1x tunnel-qinq boolean | |
| Tree | tunnel-qinq | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
tunneling boolean
down-on-internal-error
| Synopsis | Enable the down-on-internal-error context | |
| Context | configure port port ethernet down-on-internal-error | |
| Tree | down-on-internal-error | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
tx-laser keyword
| Synopsis | Remote laser state on internal MAC transmit error | |
| Context | configure port port ethernet down-on-internal-error tx-laser keyword | |
| Tree | tx-laser | |
| Options | ||
| Default | on | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
duplex keyword
| Synopsis | Duplex type for the fast Ethernet port | |
| Context | configure port port ethernet duplex keyword | |
| Tree | duplex | |
Description | This command configures the duplex of a Fast Ethernet port when autonegotiation is disabled. This command setting is ignored if autonegotiation is enabled for the port. | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
egress
port-scheduler-policy
| Synopsis | Enter the port-scheduler-policy context | |
| Context | configure port port ethernet egress port-scheduler-policy | |
| Tree | port-scheduler-policy | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
overrides
level [priority-level] number
[priority-level] number
rate
cir (number | keyword)
pir (number | keyword)
max-rate
| Synopsis | Enter the max-rate context | |
| Context | configure port port ethernet egress port-scheduler-policy overrides max-rate | |
| Tree | max-rate | |
Description | Commands in this context override the max-rate command found in the port scheduler policy associated with the port. When a maximum rate is defined at the port or channel level, the port scheduler's policy max-rate command is ignored. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
rate (number | keyword)
| Synopsis | PIR rate | |
| Context | configure port port ethernet egress port-scheduler-policy overrides max-rate rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Default | max | |
Notes |
The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
policy-name reference
| Synopsis | Egress scheduler policy name | |
| Context | configure port port ethernet egress port-scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos port-scheduler-policy named-item | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
rate number
| Synopsis | Rate of egress traffic | |
| Context | configure port port ethernet egress rate number | |
| Tree | rate | |
Description | This command configures the rate of traffic leaving the network. An event log is generated each time the egress rate is modified unless the port is part of a LAG. This command is not supported for all MDA types. | |
| Max. range | -2147483648 to 2147483647 | |
| Units | kilobps | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
encap-type keyword
| Synopsis | Encapsulation method for the Ethernet port | |
| Context | configure port port ethernet encap-type keyword | |
| Tree | encap-type | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
hold-time
down number
| Synopsis | Delay after interface goes from up state to down state | |
| Context | configure port port ethernet hold-time down number | |
| Tree | down | |
Description | This command specifies the delay to notify the upper layers after an interface transitions from an up state to a down state. When an interface transitions from an up state to a down state, it is immediately advertised to the rest of the system if the down interval is zero, but if the down interval is greater than zero, interface down transitions are not advertised to upper layers until the down interval has expired. | |
| Range | 1 to 3600000 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
units keyword
up number
| Synopsis | Delay after interface goes from down state to up state | |
| Context | configure port port ethernet hold-time up number | |
| Tree | up | |
Description | This command specifies the delay to notify the upper layers after an interface transitions from a down state to an up state. When an interface transitions from a down state to an up state, it is immediately advertised as up to the rest of the system if the up interval is zero, but if the up interval is greater than zero, up transitions are not advertised until the up interval has expired. | |
| Range | 1 to 3600000 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
ingress
rate number
lacp-tunnel boolean
| Synopsis | Enable LACP packet tunneling for the Ethernet port | |
| Context | configure port port ethernet lacp-tunnel boolean | |
| Tree | lacp-tunnel | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
lldp
dest-mac [mac-type] keyword
[mac-type] keyword
| Synopsis | Destination MAC address type | |
| Context | configure port port ethernet lldp dest-mac keyword | |
| Tree | dest-mac | |
| Options | nearest-bridge – Use the nearest bridge nearest-non-tpmr – Use nearest non-Two-Port MAC Relay (TPMR) nearest-customer – Use the nearest customer | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
notification boolean
| Synopsis | Enable LLDP notifications | |
| Context | configure port port ethernet lldp dest-mac keyword notification boolean | |
| Tree | notification | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
port-id-subtype keyword
| Synopsis | Port ID TLV encoding method for transmission to peer | |
| Context | configure port port ethernet lldp dest-mac keyword port-id-subtype keyword | |
| Tree | port-id-subtype | |
| Options | ||
| Default | tx-local | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
receive boolean
transmit boolean
tunnel-nearest-bridge boolean
| Synopsis | Allow the received LLDP packets to be tunneled | |
| Context | configure port port ethernet lldp dest-mac keyword tunnel-nearest-bridge boolean | |
| Tree | tunnel-nearest-bridge | |
Description | When configured to true, the system allows LLDP packets received on the port with the destination address of the nearest bridge to be tunneled without being intercepted on the local port. When configured to false, LLDP tunneling is disabled. The nearest-bridge option in the configure port ethernet lldp dest-mac mac-type command must be disabled for tunneling to occur. This is applicable to NULL SAP Epipe and VPLS services only. | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
tunnel-nearest-customer boolean
| Synopsis | Enable the nearest customer tunneling | |
| Context | configure port port ethernet lldp dest-mac keyword tunnel-nearest-customer boolean | |
| Tree | tunnel-nearest-customer | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
tunnel-nearest-non-tpmr boolean
| Synopsis | Enable the nearest non-TPMR tunneling | |
| Context | configure port port ethernet lldp dest-mac keyword tunnel-nearest-non-tpmr boolean | |
| Tree | tunnel-nearest-non-tpmr | |
Description | When configured to true, the LLDP destination MAC uses the nearest TPMR tunnel. | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
tx-mgmt-address [mgmt-address-system-type] keyword
| Synopsis | Enter the tx-mgmt-address list instance | |
| Context | configure port port ethernet lldp dest-mac keyword tx-mgmt-address keyword | |
| Tree | tx-mgmt-address | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[mgmt-address-system-type] keyword
| Synopsis | Management address to transmit | |
| Context | configure port port ethernet lldp dest-mac keyword tx-mgmt-address keyword | |
| Tree | tx-mgmt-address | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
admin-state keyword
| Synopsis | Administrative state of transmitting management address | |
| Context | configure port port ethernet lldp dest-mac keyword tx-mgmt-address keyword admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
tx-tlvs
port-desc boolean
sys-cap boolean
sys-desc boolean
sys-name boolean
load-balancing-algorithm keyword
| Synopsis | Load balancing algorithm for the Ethernet port | |
| Context | configure port port ethernet load-balancing-algorithm keyword | |
| Tree | load-balancing-algorithm | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
mac-address mac-address
| Synopsis | MAC address of the Ethernet port | |
| Context | configure port port ethernet mac-address mac-address | |
| Tree | mac-address | |
Description | This command specifies the MAC address of the Ethernet port. Allowed values are any non-broadcast, non-multicast MAC, and non-IEEE reserved MAC addresses. The default value indicates that an operation MAC address is to be assigned from the chassis MAC address pool. | |
| Default | 00:00:00:00:00:00 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
min-frame-length number
| Synopsis | Minimum transmitted frame length | |
| Context | configure port port ethernet min-frame-length number | |
| Tree | min-frame-length | |
Description | This command configures the minimum transmitted frame length. | |
| Range | 64 | 68 | 72 | |
| Units | bytes | |
| Default | 64 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
mode keyword
mtu number
| Synopsis | Maximum payload MTU size for the Ethernet port | |
| Context | configure port port ethernet mtu number | |
| Tree | mtu | |
Description | This command configures the maximum payload MTU size for the Ethernet port. This command indirectly defines the largest physical packet the port can transmit or the far-end Ethernet port can receive. Packets that cannot be fragmented at egress and exceed the MTU size are discarded. The MTU size includes the destination MAC address, source MAC address, the Ethertype or length field, and the complete Ethernet payload. This value does not include the preamble, start of frame delimiter, or the trailing CRC. | |
| Range | 512 to 9800 | |
| Units | bytes | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
network
accounting-policy reference
| Synopsis | Accounting policy that applies to the network port | |
| Context | configure port port ethernet network accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
collect-stats boolean
| Synopsis | Collect accounting and statistical data | |
| Context | configure port port ethernet network collect-stats boolean | |
| Tree | collect-stats | |
Description | When configured to true, this command enables the collection of accounting and statistical data for the network interface. When applying accounting policies, by default the data is collected in the appropriate records and written to the designated billing file. When configured to false, the statistics are still accumulated by the XCM or IOM cards. However, the CPU does not obtain the results and write them to the billing file. | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
egress
queue-group [queue-group-name] reference instance-id number
| Synopsis | Enter the queue-group list instance | |
| Context | configure port port ethernet network egress queue-group reference instance-id number | |
| Tree | queue-group | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[queue-group-name] reference
| Synopsis | Queue group name | |
| Context | configure port port ethernet network egress queue-group reference instance-id number | |
| Tree | queue-group | |
Reference | configure qos queue-group-templates egress queue-group named-item | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
instance-id number
| Synopsis | Instance ID for the egress queue group | |
| Context | configure port port ethernet network egress queue-group reference instance-id number | |
| Tree | queue-group | |
| Range | 1 to 65535 | |
| MD-CLI default | 1 | |
|
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
accounting-policy reference
| Synopsis | Accounting policy for the Ethernet port | |
| Context | configure port port ethernet network egress queue-group reference instance-id number accounting-policy reference | |
| Tree | accounting-policy | |
Reference | configure log accounting-policy number | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
collect-stats boolean
| Synopsis | Collect accounting and statistical data | |
| Context | configure port port ethernet network egress queue-group reference instance-id number collect-stats boolean | |
| Tree | collect-stats | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
description description
| Synopsis | Text description | |
| Context | configure port port ethernet network egress queue-group reference instance-id number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
policer-control-policy reference
| Synopsis | Policer control policy for the QoS egress queue group | |
| Context | configure port port ethernet network egress queue-group reference instance-id number policer-control-policy reference | |
| Tree | policer-control-policy | |
Reference | configure qos policer-control-policy named-item | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
queue-overrides
| Synopsis | Enter the queue-overrides context | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides | |
| Tree | queue-overrides | |
Description | Commands in this context define queue command overrides for each queue within the queue group. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
queue [queue-id] reference
| Synopsis | Enter the queue list instance | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference | |
| Tree | queue | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
[queue-id] reference
| Synopsis | Queue ID | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference | |
| Tree | queue | |
Reference | configure qos queue-group-templates egress queue-group named-item queue number | |
Notes | This element is part of a list key. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference adaptation-rule | |
| Tree | adaptation-rule | |
Description | Commands in this context specify the method used by the system to derive the operational CIR and PIR settings when the queue is provisioned in hardware. For the CIR and PIR commands individually, the system attempts to find the best operational rate depending on the defined constraint. Commands in this context are ignored for egress HSQ queue group queues that are attached to an HS WRR group within an associated HS attachment policy. In this case, the configuration of the adaptation rule is performed under the hs-wrr-group command within the egress queue group template. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cbs (number | keyword)
| Synopsis | CBS for the template queue | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 1048576 | |
| Units | kilobytes | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
drop-tail
| Synopsis | Enter the drop-tail context | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference drop-tail | |
| Tree | drop-tail | |
Description | Commands in this context configure queue drop tail commands. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
low
| Synopsis | Enter the low context | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference drop-tail low | |
| Tree | low | |
Description | Commands in this context configure the queue low drop tail commands. The low drop tail defines the queue depth beyond which the out-of-profile packets are not accepted into the queue and discarded. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
Description | This command overrides the low queue drop tail as a percentage reduction from the MBS of the queue. For example, if a queue has an MBS of 600 kbytes and this percentage is configured to be 30% for the low drop tail, the low drop tail is set to 420 kbytes and the out-of-profile packets are not accepted into the queue if its depth is greater than this value, and is therefore discarded. | |
| Range | 0 to 100 | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
mbs (number | keyword)
| Synopsis | MBS for the template queue | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 1073741824 | |
| Units | bytes | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference percent-rate | |
| Tree | percent-rate | |
Description | Commands in this context specify percent rates. This command is ignored for egress HSQ queue group queues, which are attached to an HS WRR group within an associated HS attachment policy. In this case, the configuration of the percent rate is performed under the hs-wrr-group command within the egress queue group template. | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir decimal-number
| Synopsis | CIR for the queue | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Units | percent | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
pir decimal-number
| Synopsis | PIR for the queue | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Units | percent | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
rate
| Synopsis | Enter the rate context | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference rate | |
| Tree | rate | |
Description | Commands in this context specify the administrative PIR and CIR for the queue. Defining a PIR does not necessarily guarantee that the queue can transmit at the intended rate. The actual rate sustained by the queue can be limited by oversubscription factors or available egress bandwidth. This command can be executed at anytime, altering the PIR and CIR rates for all queues created through the association of the SAP egress QoS policy with the queue ID. This command is ignored for egress HSQ queue group queues, which are attached to an HS WRR group within an associated HS attachment policy. In this case, the configuration of the rate is performed under the hs-wrr-group command within the egress queue group template. | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
cir (number | keyword)
| Synopsis | CIR for the queue | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference rate cir (number | keyword) | |
| Tree | cir | |
Description | This command specifies the administrative CIR used by the queue. When the rate command is executed, a CIR setting is optional. Fractional values are not allowed and must be given as a positive integer. The CIR defines the rate at which the system prioritizes the queue over other queues competing for the same bandwidth. In-profile then out-of-profile packets are preferentially queued by the system at egress and at subsequent next hop nodes where the packet can traverse. To be properly handled throughout the network, the packets must be marked accordingly for profiling at each hop. The CIR can be used by the queue’s parent cir-level and cir-weight commands to define the amount of bandwidth considered to be committed for the child queue during bandwidth allocation by the parent scheduler. | |
| Range | 0 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
pir (number | keyword)
| Synopsis | PIR for the queue | |
| Context | configure port port ethernet network egress queue-group reference instance-id number queue-overrides queue reference rate pir (number | keyword) | |
| Tree | pir | |
Description | This command specifies the administrative PIR used by the queue. When the rate command is executed, a valid PIR setting must be explicitly defined. Fractional values are not allowed and must be given as a positive integer. The actual PIR rate is dependent on the queue’s adaptation-rule commands and the actual hardware where the queue is provisioned. The PIR defines the maximum rate that the queue can transmit packets out an egress interface (for SAP egress queues). Defining a PIR does not necessarily guarantee that the queue can transmit at the intended rate. The actual rate sustained by the queue can be limited by oversubscription factors or available egress bandwidth. | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
scheduler-policy
| Synopsis | Enter the scheduler-policy context | |
| Context | configure port port ethernet network egress queue-group reference instance-id number scheduler-policy | |
| Tree | scheduler-policy | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
policy-name reference
| Synopsis | Scheduler policy for the QoS egress queue group | |
| Context | configure port port ethernet network egress queue-group reference instance-id number scheduler-policy policy-name reference | |
| Tree | policy-name | |
Reference | configure qos scheduler-policy named-item | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
queue-policy reference
| Synopsis | Network queue policy | |
| Context | configure port port ethernet network egress queue-policy reference | |
| Tree | queue-policy | |
Reference | configure qos network-queue named-item | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
qinq-etype etype
| Synopsis | Ethertype for QinQ encapsulation | |
| Context | configure port port ethernet qinq-etype etype | |
| Tree | qinq-etype | |
| Default | 33024 | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
report-alarm
| Synopsis | Enter the report-alarm context | |
| Context | configure port port ethernet report-alarm | |
| Tree | report-alarm | |
Description | Commands in this context specify the settings for alarm generation and alarm clear notifications for the port. Note: For some DWDM transceivers, if the configure port dwdm coherent rx-los-reaction squelch command is disabled, the signal-fail and no-am-lock alarm conditions are not reported when the media side of the transceiver has an RX LOS condition. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
alignment-marker-not-locked boolean
| Synopsis | Report 40G/100G PCS Alignment Marker Loss of Lock | |
| Context | configure port port ethernet report-alarm alignment-marker-not-locked boolean | |
| Tree | alignment-marker-not-locked | |
Description | When configured to true, Alignment Marker Loss of Lock alarms are reported for this port. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
block-not-locked boolean
| Synopsis | Report 40G/100G PCS Lanes Not Block Locked | |
| Context | configure port port ethernet report-alarm block-not-locked boolean | |
| Tree | block-not-locked | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
duplicate-lane boolean
| Synopsis | Report 40G/100G PCS Duplicate Lane Marker alarm | |
| Context | configure port port ethernet report-alarm duplicate-lane boolean | |
| Tree | duplicate-lane | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
frame-not-locked boolean
| Synopsis | Report "not locked on the Ethernet framing sequence" | |
| Context | configure port port ethernet report-alarm frame-not-locked boolean | |
| Tree | frame-not-locked | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
high-ber boolean
| Synopsis | Report High Bit Error Rate | |
| Context | configure port port ethernet report-alarm high-ber boolean | |
| Tree | high-ber | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
local boolean
| Synopsis | Report local faults | |
| Context | configure port port ethernet report-alarm local boolean | |
| Tree | local | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
remote boolean
| Synopsis | Report remote faults | |
| Context | configure port port ethernet report-alarm remote boolean | |
| Tree | remote | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
signal-fail boolean
| Synopsis | Report Ethernet signal lost alarm | |
| Context | configure port port ethernet report-alarm signal-fail boolean | |
| Tree | signal-fail | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
rs-fec-mode keyword
| Synopsis | RS-FEC mode on the Ethernet port | |
| Context | configure port port ethernet rs-fec-mode keyword | |
| Tree | rs-fec-mode | |
Description | This command specifies the RS-FEC (Reed-Solomon Forward Error Correction) mode on the Ethernet port. See "Forward Error Correction" in the 7705 SAR Gen 2 Interface Configuration Guide for more information about FEC settings. | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
speed number
| Synopsis | Ethernet port speed | |
| Context | configure port port ethernet speed number | |
| Tree | speed | |
Description | This command configures the port speed for ports that support multiple speeds. This applies to the following:
If autonegotiation is enabled for the port, this command setting is ignored. Speed cannot be configured for ports that are part of a LAG. | |
| Range | 10 | 100 | 1000 | 10000 | 25000 | 40000 | 50000 | 100000 | |
| Units | megabps | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
ssm
| Synopsis | Enter the ssm context | |
| Context | configure port port ethernet ssm | |
| Tree | ssm | |
Description | Commands in this context configure the Ethernet Synchronization Messaging Channel (ESMC) for the Ethernet port. The ESMC carries the Synchronization Status Message (SSM) code representing the quality level of the source of the frequency of the central clock of the node. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
admin-state keyword
| Synopsis | Administrative state of the ESMC for the Ethernet port | |
| Context | configure port port ethernet ssm admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Default | disable | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
code-type keyword
tx-dus boolean
util-stats-interval number
| Synopsis | Interval to calculate utilization statistics | |
| Context | configure port port ethernet util-stats-interval number | |
| Tree | util-stats-interval | |
Description | This command configures the interval used to calculate the utilization statistics. Port utilization statistics are only available for physical Ethernet ports on a host system. These statistics are not available for the following:
| |
| Range | 30 to 600 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
xgig keyword
| Synopsis | Ethernet port mode | |
| Context | configure port port ethernet xgig keyword | |
| Tree | xgig | |
Description | This command configures a 10 Gb/s interface to be in LAN or WAN mode. When configuring the port to be in WAN mode, certain SONET/SDH commands can be changed to reflect the SONET/SDH requirements for the port. When configuring the port to be in LAN mode, all SONET/SDH commands are pre-determined and not configurable. | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
monitor-oper-group reference
| Synopsis | Operational group to monitor | |
| Context | configure port port monitor-oper-group reference | |
| Tree | monitor-oper-group | |
Description | This command configures the operational group to monitor the operational group state. The state of the operational group affects the state of this port. When the operational group is inactive, the state of the port goes down and powers off the port to signal to the CE that the connected port is not available. | |
Reference | configure service oper-group named-item | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
network
egress
pool [name] named-item
[name] named-item
otu
async-mapping boolean
| Synopsis | Allow asynchoronous mapping of the payload inside OTU | |
| Context | configure port port otu async-mapping boolean | |
| Tree | async-mapping | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
fec keyword
fine-granularity-ber
| Synopsis | Enter the fine-granularity-ber context | |
| Context | configure port port otu fine-granularity-ber | |
| Tree | fine-granularity-ber | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
signal-degrade
| Synopsis | Enter the signal-degrade context | |
| Context | configure port port otu fine-granularity-ber signal-degrade | |
| Tree | signal-degrade | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
clear
| Synopsis | Enter the clear context | |
| Context | configure port port otu fine-granularity-ber signal-degrade clear | |
| Tree | clear | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
multiplier number
| Synopsis | Multiplier of the SD clear threshold | |
| Context | configure port port otu fine-granularity-ber signal-degrade clear multiplier number | |
| Tree | multiplier | |
| Range | 10 to 99 | |
| Default | 10 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
threshold number
| Synopsis | SD clear threshold | |
| Context | configure port port otu fine-granularity-ber signal-degrade clear threshold number | |
| Tree | threshold | |
| Range | 3 to 10 | |
| Default | 8 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
raise
| Synopsis | Enter the raise context | |
| Context | configure port port otu fine-granularity-ber signal-degrade raise | |
| Tree | raise | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
multiplier number
| Synopsis | Multiplier of the SD raise threshold | |
| Context | configure port port otu fine-granularity-ber signal-degrade raise multiplier number | |
| Tree | multiplier | |
| Range | 10 to 99 | |
| Default | 10 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
threshold number
| Synopsis | SD raise threshold | |
| Context | configure port port otu fine-granularity-ber signal-degrade raise threshold number | |
| Tree | threshold | |
| Range | 3 to 9 | |
| Default | 7 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
signal-failure
| Synopsis | Enter the signal-failure context | |
| Context | configure port port otu fine-granularity-ber signal-failure | |
| Tree | signal-failure | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
clear
| Synopsis | Enter the clear context | |
| Context | configure port port otu fine-granularity-ber signal-failure clear | |
| Tree | clear | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
multiplier number
| Synopsis | Threshold for the Multiplier of SD clear | |
| Context | configure port port otu fine-granularity-ber signal-failure clear multiplier number | |
| Tree | multiplier | |
| Range | 10 to 99 | |
| Default | 10 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
threshold number
| Synopsis | Threshold for the Multiplier of SD clear | |
| Context | configure port port otu fine-granularity-ber signal-failure clear threshold number | |
| Tree | threshold | |
| Range | 3 to 9 | |
| Default | 6 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
raise
| Synopsis | Enter the raise context | |
| Context | configure port port otu fine-granularity-ber signal-failure raise | |
| Tree | raise | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
multiplier number
| Synopsis | SF raise threshold | |
| Context | configure port port otu fine-granularity-ber signal-failure raise multiplier number | |
| Tree | multiplier | |
| Range | 10 to 99 | |
| Default | 10 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
threshold number
| Synopsis | SF raise threshold | |
| Context | configure port port otu fine-granularity-ber signal-failure raise threshold number | |
| Tree | threshold | |
| Range | 3 to 8 | |
| Default | 5 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
otu2-lan-data-rate keyword
| Synopsis | Data rate for 10GE LAN OTU2 on the port | |
| Context | configure port port otu otu2-lan-data-rate keyword | |
| Tree | otu2-lan-data-rate | |
| Units | gigabps | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
path-monitoring
| Synopsis | Enter the path-monitoring context | |
| Context | configure port port otu path-monitoring | |
| Tree | path-monitoring | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
trail-trace-identifier
| Synopsis | Enter the trail-trace-identifier context | |
| Context | configure port port otu path-monitoring trail-trace-identifier | |
| Tree | trail-trace-identifier | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
expected
| Synopsis | Enter the expected context | |
| Context | configure port port otu path-monitoring trail-trace-identifier expected | |
| Tree | expected | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
auto-generated
| Synopsis | Use the system generated TTI | |
| Context | configure port port otu path-monitoring trail-trace-identifier expected auto-generated | |
| Tree | auto-generated | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
bytes string
| Synopsis | TTI as a sequence of bytes | |
| Context | configure port port otu path-monitoring trail-trace-identifier expected bytes string | |
| Tree | bytes | |
| String length | 0 to 192 | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
string string
| Synopsis | TTI as a sequence of printable ASCII | |
| Context | configure port port otu path-monitoring trail-trace-identifier expected string string | |
| Tree | string | |
| String length | 0 to 64 | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
mismatch-reaction keyword
| Synopsis | Reaction to a mismatched TTI | |
| Context | configure port port otu path-monitoring trail-trace-identifier mismatch-reaction keyword | |
| Tree | mismatch-reaction | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
transmit
| Synopsis | Enter the transmit context | |
| Context | configure port port otu path-monitoring trail-trace-identifier transmit | |
| Tree | transmit | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
auto-generated
| Synopsis | Use the system generated TTI | |
| Context | configure port port otu path-monitoring trail-trace-identifier transmit auto-generated | |
| Tree | auto-generated | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
bytes string
| Synopsis | TTI as a sequence of bytes | |
| Context | configure port port otu path-monitoring trail-trace-identifier transmit bytes string | |
| Tree | bytes | |
| String length | 0 to 192 | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
string string
| Synopsis | TTI as a sequence of printable ASCII | |
| Context | configure port port otu path-monitoring trail-trace-identifier transmit string string | |
| Tree | string | |
| String length | 0 to 64 | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
payload-structure-identifier
| Synopsis | Enter the payload-structure-identifier context | |
| Context | configure port port otu payload-structure-identifier | |
| Tree | payload-structure-identifier | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
payload
| Synopsis | Enter the payload context | |
| Context | configure port port otu payload-structure-identifier payload | |
| Tree | payload | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
expected keyword
mismatch-reaction keyword
| Synopsis | Reaction to a mismatched payload | |
| Context | configure port port otu payload-structure-identifier payload mismatch-reaction keyword | |
| Tree | mismatch-reaction | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
transmit keyword
report-alarm
| Synopsis | Enter the report-alarm context | |
| Context | configure port port otu report-alarm | |
| Tree | report-alarm | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
fec-fail boolean
| Synopsis | Report FEC mode mismatch alarm | |
| Context | configure port port otu report-alarm fec-fail boolean | |
| Tree | fec-fail | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
fec-sd boolean
| Synopsis | Report Signal Degrade alarm | |
| Context | configure port port otu report-alarm fec-sd boolean | |
| Tree | fec-sd | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
fec-sf boolean
| Synopsis | Report Signal Fail alarm | |
| Context | configure port port otu report-alarm fec-sf boolean | |
| Tree | fec-sf | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
fec-uncorr boolean
| Synopsis | Report one or more Uncorrectable FEC errors alarm | |
| Context | configure port port otu report-alarm fec-uncorr boolean | |
| Tree | fec-uncorr | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
loc boolean
| Synopsis | Report OTU alarm for loss of clock | |
| Context | configure port port otu report-alarm loc boolean | |
| Tree | loc | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
lof boolean
| Synopsis | Report alarm for the loss of OTU framing | |
| Context | configure port port otu report-alarm lof boolean | |
| Tree | lof | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
lom boolean
| Synopsis | Report alarm for the loss of multi-frame | |
| Context | configure port port otu report-alarm lom boolean | |
| Tree | lom | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
los boolean
| Synopsis | Report alarm for the loss of signal transitions on data | |
| Context | configure port port otu report-alarm los boolean | |
| Tree | los | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
odu-ais boolean
| Synopsis | Report ODU Alarm Indication Signal alarm | |
| Context | configure port port otu report-alarm odu-ais boolean | |
| Tree | odu-ais | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
odu-bdi boolean
| Synopsis | Report PM Backward Defect Indication alarm | |
| Context | configure port port otu report-alarm odu-bdi boolean | |
| Tree | odu-bdi | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
odu-lck boolean
| Synopsis | Report ODU Locked alarm | |
| Context | configure port port otu report-alarm odu-lck boolean | |
| Tree | odu-lck | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
odu-oci boolean
| Synopsis | Report ODU Open Connection Indication alarm | |
| Context | configure port port otu report-alarm odu-oci boolean | |
| Tree | odu-oci | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
odu-tim boolean
| Synopsis | Report PM Trace ID Mismatch alarm | |
| Context | configure port port otu report-alarm odu-tim boolean | |
| Tree | odu-tim | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
opu-plm boolean
| Synopsis | Report PSI Payload Type Mismatch alarm | |
| Context | configure port port otu report-alarm opu-plm boolean | |
| Tree | opu-plm | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
otu-ais boolean
| Synopsis | Report OTU Alarm Indication Signal alarm | |
| Context | configure port port otu report-alarm otu-ais boolean | |
| Tree | otu-ais | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
otu-bdi boolean
| Synopsis | Report SM Backward Defect Indication alarm | |
| Context | configure port port otu report-alarm otu-bdi boolean | |
| Tree | otu-bdi | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
otu-ber-sd boolean
| Synopsis | Report SM Signal Degrade alarm | |
| Context | configure port port otu report-alarm otu-ber-sd boolean | |
| Tree | otu-ber-sd | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
otu-ber-sf boolean
| Synopsis | Report SM Signal Fail alarm | |
| Context | configure port port otu report-alarm otu-ber-sf boolean | |
| Tree | otu-ber-sf | |
| Default | true | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
otu-biae boolean
| Synopsis | Report SM Backward Incoming Alignment Error alarm | |
| Context | configure port port otu report-alarm otu-biae boolean | |
| Tree | otu-biae | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
otu-iae boolean
| Synopsis | Report SM Incoming Alignment Error alarm | |
| Context | configure port port otu report-alarm otu-iae boolean | |
| Tree | otu-iae | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
otu-tim boolean
| Synopsis | Report SM Trace ID Mismatch alarm | |
| Context | configure port port otu report-alarm otu-tim boolean | |
| Tree | otu-tim | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
sd-threshold number
| Synopsis | Error rate at which to declare signal degrade condition | |
| Context | configure port port otu sd-threshold number | |
| Tree | sd-threshold | |
| Range | 5 to 9 | |
| Default | 7 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
section-monitoring
| Synopsis | Enter the section-monitoring context | |
| Context | configure port port otu section-monitoring | |
| Tree | section-monitoring | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
trail-trace-identifier
| Synopsis | Enter the trail-trace-identifier context | |
| Context | configure port port otu section-monitoring trail-trace-identifier | |
| Tree | trail-trace-identifier | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
expected
| Synopsis | Enter the expected context | |
| Context | configure port port otu section-monitoring trail-trace-identifier expected | |
| Tree | expected | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
auto-generated
| Synopsis | Use the system generated TTI | |
| Context | configure port port otu section-monitoring trail-trace-identifier expected auto-generated | |
| Tree | auto-generated | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
bytes string
| Synopsis | TTI as a sequence of bytes | |
| Context | configure port port otu section-monitoring trail-trace-identifier expected bytes string | |
| Tree | bytes | |
| String length | 0 to 192 | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
string string
| Synopsis | TTI as a sequence of printable ASCII | |
| Context | configure port port otu section-monitoring trail-trace-identifier expected string string | |
| Tree | string | |
| String length | 0 to 64 | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
mismatch-reaction keyword
| Synopsis | Reaction to a mismatched TTI | |
| Context | configure port port otu section-monitoring trail-trace-identifier mismatch-reaction keyword | |
| Tree | mismatch-reaction | |
| Options | ||
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
transmit
| Synopsis | Enter the transmit context | |
| Context | configure port port otu section-monitoring trail-trace-identifier transmit | |
| Tree | transmit | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
auto-generated
| Synopsis | Use the system generated TTI | |
| Context | configure port port otu section-monitoring trail-trace-identifier transmit auto-generated | |
| Tree | auto-generated | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
bytes string
| Synopsis | TTI as a sequence of bytes | |
| Context | configure port port otu section-monitoring trail-trace-identifier transmit bytes string | |
| Tree | bytes | |
| String length | 0 to 192 | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
string string
| Synopsis | TTI as a sequence of printable ASCII | |
| Context | configure port port otu section-monitoring trail-trace-identifier transmit string string | |
| Tree | string | |
| String length | 0 to 64 | |
Notes | The following elements are part of a choice: auto-generated, bytes, or string. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
sf-sd-method keyword
| Synopsis | Method used to determine the SF and SD alarms | |
| Context | configure port port otu sf-sd-method keyword | |
| Tree | sf-sd-method | |
| Options | ||
| Default | fec | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
sf-threshold number
| Synopsis | Error rate at which to declare signal fail condition | |
| Context | configure port port otu sf-threshold number | |
| Tree | sf-threshold | |
| Range | 3 to 6 | |
| Default | 5 | |
| Introduced | 25.3.R2 | |
Platforms |
7705 SAR Gen 2 |
transceiver
| Synopsis | Enter the transceiver context | |
| Context | configure port port transceiver | |
| Tree | transceiver | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
digital-coherent-optics boolean
| Synopsis | Enable digital coherent optics module for transceiver | |
| Context | configure port port transceiver digital-coherent-optics boolean | |
| Tree | digital-coherent-optics | |
| Default | false | |
| Introduced | 25.3.R2 | |
|
Platforms | 7705 SAR Gen 2 |
optical-line-system
| Synopsis | Enable the optical-line-system context | |
| Context | configure port port transceiver optical-line-system | |
| Tree | optical-line-system | |
Description | Commands in this context configure the QSFP-LS pluggable optical line system, used in conjunction with 400G ZR/ZR+ coherent pluggable modules. | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |
egress-amplifier-gain decimal-number
| Synopsis | Gain for the egress amplifier | |
| Context | configure port port transceiver optical-line-system egress-amplifier-gain decimal-number | |
| Tree | egress-amplifier-gain | |
| Range | 0.00 to 25.00 | |
| Units | decibels | |
| Default | 25.00 | |
| Introduced | 25.3.R2 | |
Platforms | 7705 SAR Gen 2 |