redundancy commands

configure 
   —  redundancy 
      —  apply-groups reference
      —  apply-groups-exclude reference
      —  bgp-evpn 
         —  ethernet-segment 
            —  activation-timer number
            —  apply-groups reference
            —  apply-groups-exclude reference
            —  boot-timer number
      —  bgp-mh 
         —  apply-groups reference
         —  apply-groups-exclude reference
         —  site 
            —  activation-timer number
            —  boot-timer number
            —  min-down-timer number
      —  cert-sync boolean
      —  multi-chassis 
         —  ipsec-domain number 
            —  admin-state keyword
            —  apply-groups reference
            —  apply-groups-exclude reference
            —  designated-role keyword
            —  priority number
            —  revertive boolean
            —  tunnel-group reference
         —  peer (ipv4-address-no-zone | ipv6-address-no-zone) 
            —  admin-state keyword
            —  apply-groups reference
            —  apply-groups-exclude reference
            —  authentication-key encrypted-leaf
            —  description description
            —  mc-endpoint 
               —  admin-state keyword
               —  apply-groups reference
               —  apply-groups-exclude reference
               —  bfd boolean
               —  boot-timer number
               —  hold-on-neighbor-failure number
               —  keep-alive-interval number
               —  passive-mode boolean
               —  system-priority number
            —  mc-ipsec 
               —  apply-groups reference
               —  apply-groups-exclude reference
               —  bfd-liveness boolean
               —  discovery-interval 
                  —  boot number
                  —  interval-secs number
               —  domain reference 
                  —  admin-state keyword
                  —  apply-groups reference
                  —  apply-groups-exclude reference
               —  hold-on-neighbor-failure number
               —  keep-alive-interval number
               —  tunnel-group reference 
                  —  admin-state keyword
                  —  apply-groups reference
                  —  apply-groups-exclude reference
                  —  peer-group number
                  —  priority number
            —  mc-lag 
               —  admin-state keyword
               —  apply-groups reference
               —  apply-groups-exclude reference
               —  hold-on-neighbor-failure number
               —  keep-alive-interval number
               —  lag reference 
                  —  apply-groups reference
                  —  apply-groups-exclude reference
                  —  lacp-key number
                  —  remote-lag lag-interface
                  —  system-id mac-address
                  —  system-priority number
            —  mc-ring 
               —  apply-groups reference
               —  apply-groups-exclude reference
               —  ring named-item 
                  —  admin-state keyword
                  —  apply-groups reference
                  —  apply-groups-exclude reference
                  —  in-band-control-path 
                     —  debounce boolean
                     —  dst-ip ipv4-unicast-address
                     —  interface interface-name
                     —  max-debounce-time number
                     —  service-name service-name
                  —  path-b 
                     —  apply-groups reference
                     —  apply-groups-exclude reference
                     —  range start number end number 
                     —  wildcard-saps boolean
                  —  path-excl 
                     —  apply-groups reference
                     —  apply-groups-exclude reference
                     —  range start number end number 
                     —  wildcard-saps boolean
                  —  ring-node named-item 
                     —  admin-state keyword
                     —  apply-groups reference
                     —  apply-groups-exclude reference
                     —  dst-ip ipv4-unicast-address
                     —  interval number
                     —  service-name service-name
                     —  src-ip ipv4-unicast-address
                     —  src-mac (keyword | ring-node-mac-address)
                     —  vlan ext-vlan-encap
                  —  type keyword
            —  peer-name named-item
            —  source-address (ipv4-address-no-zone | ipv6-address-no-zone)
            —  sync 
               —  admin-state keyword
               —  apply-groups reference
               —  apply-groups-exclude reference
               —  ipsec boolean
               —  l2tp boolean
               —  local-dhcp-server boolean
               —  mc-ring boolean
               —  tags 
                  —  lag reference 
                     —  apply-groups reference
                     —  apply-groups-exclude reference
                     —  range start vlan-encap end vlan-encap 
                        —  apply-groups reference
                        —  apply-groups-exclude reference
                        —  sync-tag named-item
                     —  sync-tag named-item
                  —  port reference 
                     —  apply-groups reference
                     —  apply-groups-exclude reference
                     —  range start vlan-encap end vlan-encap 
                        —  apply-groups reference
                        —  apply-groups-exclude reference
                        —  sync-tag named-item
                     —  sync-tag named-item
                  —  sdp number 
                     —  apply-groups reference
                     —  apply-groups-exclude reference
                     —  range start number end number 
                        —  apply-groups reference
                        —  apply-groups-exclude reference
                        —  sync-tag named-item
                     —  sync-tag named-item
               —  transport-encryption 
                  —  application keyword 
                     —  apply-groups reference
                     —  apply-groups-exclude reference
                     —  keychain reference
               —  tunnel-group number 
                  —  apply-groups reference
                  —  apply-groups-exclude reference
                  —  sync-tag named-item
      —  rollback-sync keyword
      —  switchover-exec url
      —  synchronize keyword