Terminating ADP-Hm

ADP can be disabled manually by executing the bof no auto-discover command and saving the BOF.

To terminate ADP-Hm:

1. Perform one of the following:

   1. At boot up, the system displays a warning and a prompt about terminating Auto-Discovery. Type y to terminate Auto-Discovery. For example:

      WARNING: Auto-discovery is currently running on this system.  
      It is recommended that Auto-Discovery be terminated before making 
      configuration changes using this session; otherwise, any changes made during this 
      process may result in Auto-Discovery failing to complete successfully and/
      or lost configuration.
      
      Do you wish to terminate Auto-Discovery (y/n?) y
      

   2. Use the tools>perform>auto-boot terminate command. For example:

      tools# perform auto-boot terminate
      

2. Reboot the node. After reboot, the warning message disappears and auto-discovery is removed from the BOF. For example:

   *A:Dut-A# show bof          
   ===============================================================================
   BOF (Memory)
   =============================================================================== 
       primary-image cf3:/TiMOS-19.10.R1/
   
    <lines removed...>
    
       console-speed    115200
   =============================================================================== 
   *A:Dut-A#