Clear service commands
msdp
Syntax
msdp
Context
clear>router
Description
This command enables the context to clear and reset Multicast Source Discovery Protocol (MSDP) entities and statistics.
cache
Syntax
cache [peer ip-address] [group ip-address] [source ip-address] [originrp ip-address]
Context
clear>router>msdp
Description
This command clears IP addresses from the MSDP cache.
Parameters
- peer ip-address
clears the specified peer address
- group ip-address
clears the specified group address
- source ip-address
clears the specified source address
- originrp ip-address
clears the specified originating rendezvous point (RP) address
statistics
Syntax
statistics [peer ip-address]
Context
clear>router>msdp
Description
This command clears IP address statistics for the peer to which MSDP SA requests for groups matching this entry's group range were sent.
Parameters
- ip-address
clears the MSDP statistics for the specified IP address
id
Syntax
id service-id
Context
clear>service
clear>service>statistics
Description
This command clears data for a specific service.
Parameters
- service-id
the ID that uniquely identifies a service
arp
Syntax
arp
Context
clear>service>id
Description
This command clears all ARP entries.
dhcp
Syntax
dhcp
Context
clear>service>id
Description
This command enables the context to clear and reset DHCP entities.
statistics
Syntax
statistics [sap sap-id | sdp sdp-id:vc-id | interface {ip-int-name | ip-address}]
Context
clear>service>id>dhcp
Description
This command clears DHCP statistics for a specified IP interface.
Parameters
- ip-int-name
the name of the IP interface on which to clear DHCP statistics, up to 32 characters (must start with a letter)
- sap-id
the SAP ID on which to clear DHCP statistics. See SAP ID configurations for a full list of SAP IDs.
- sdp-id
the spoke SDP ID on which to clear DHCP statistics
- vc-id
the virtual circuit ID on the SDP ID for which to clear DHCP information
- ip-address
the IP address of the IP interface
dhcp6
Syntax
dhcp6
Context
clear>service>id
Description
This command enables the context to clear and reset DHCPv6 entities.
statistics
Syntax
statistics [interface {ip-int-name | ipv6-address}]
Context
clear>service>id>dhcp6
Description
This command clears DHCPv6 statistics for this IP interface.
Parameters
- interface
clears only DHCPv6 statistics for a specified interface name
- ip-int-name
the name of the IPv6 interface
- ipv6-address
the address of the IPv6 interface
ip-transport
Syntax
ip-transport ipt-id
Context
clear>service>id
Description
This command clears configured information pertaining to a specified IP transport subservice.
If no port identifier is specified, information is cleared for all IP transport subservices.
Parameters
- ipt-id
the IP transport subservice physical port identifier, in the format slot/mda/port.channel
remote-host
Syntax
remote-host host-id
Context
clear>service>id>ip-transport
Description
This command clears configured information pertaining to a specified remote host assigned to this IP transport subservice.
Parameters
- host-id
the remote host identifier
statistics
Syntax
statistics
Context
clear>service>id>ip-transport
clear>service>id>ip-transport>remote-host
Description
This command clears statistics-related information pertaining to all configured IP transport subservices or to all configured remote hosts for a specified IP transport subservice.
mesh-sdp
Syntax
mesh-sdp sdp-id[:vc-id] ingress-vc-label
Context
clear>service>id
Description
This command clears and resets the mesh SDP binding for the service.
Parameters
- sdp-id
the mesh SDP ID to be reset
- vc-id
the virtual circuit ID on the SDP ID to be reset
mfib
Syntax
mfib
Context
clear>service>id
Description
This command enables the context to clear Multicast Forwarding Information Base (MFIB)-related data.
statistics
Syntax
statistics {all | ip | mac | group grp-address }
Context
clear>service>id>mfib
Description
This command clears MFIB statistics.
Parameters
- all
clears all MFIB statistics for the service ID
- ip
clears MFIB statistics for the specified IP address
- mac
clears MFIB statistics for the specified MAC address
- grp-address
clears MFIB statistics for the specified group address
spoke-sdp
Syntax
spoke-sdp sdp-id:vc-id ingress-vc-label
Context
clear>service>id
Description
This command clears and resets the spoke SDP binding for the service.
Parameters
- sdp-id
the spoke SDP ID to be reset
- vc-id
the virtual circuit ID on the SDP ID to be reset
- ingress-vc-label
the locally assigned ingress service label
statistics
Syntax
statistics
Context
clear>service>statistics
Description
This command enables the context to clear statistics data.
cem
Syntax
cem
Context
clear>service>statistics>id
Description
This command clears Circuit Emulation (CEM) statistics for the service.
counters
Syntax
counters
Context
clear>service>statistics>id
Description
This command clears all traffic queue counters statistics associated with the service.
mesh-sdp
Syntax
mesh-sdp sdp-id[:vc-id] {all | counters | stp}
Context
clear>service>statistics>id
Description
This command clears and resets the mesh SDP binding statistics for the service.
Parameters
- sdp-id
the mesh SDP ID to be reset
- vc-id
the virtual circuit ID on the SDP ID to be reset
spoke-sdp
Syntax
spoke-sdp sdp-id:vc-id {all | counters}
Context
clear>service>statistics>id
Description
This command clears statistics for the spoke SDP bound to the service.
Parameters
- sdp-id
the spoke SDP ID for which to clear statistics
- vc-id
the virtual circuit ID on the SDP ID to be reset
- all
clears all queue statistics associated with the SDP
- counters
clears all queue counters associated with the SDP
sap
Syntax
sap sap-id {all | cem | counters}
Context
clear>service>statistics
Description
This command clears statistics for the SAP bound to the service.
Parameters
- sap-id
specifies the physical port identifier portion of the SAP definition. See SAP ID configurations for a full list of SAP IDs.
- all
clears all queue statistics associated with the SAP
- cem
clears all CEM statistics associated with the SAP
- counters
clears all queue counters associated with the SAP
sap-aggregation-group
Syntax
sap-aggregation-group svcId-id:groupName {all | counters}
Context
clear>service>statistics
Description
This command clears statistics for a specified SAP aggregation group.
Parameters
- svcId-id:groupName
the service ID or group name, up to 96 characters
- all
clears all queue statistics associated with the SAP aggregation group
- counters
clears all queue counters associated with the SAP aggregation group
sdp
Syntax
sdp sdp-id keep-alive
Context
clear>service>statistics
Description
This command clears keepalive statistics associated with the SDP ID.
Parameters
- sdp-id
the SDP ID for which to clear statistics
- keep-alive
clears the keepalive history associated with this SDP ID