Operate and maintain
Documents under this category provide functional descriptions and procedures for configuring, operating, and maintaining 7705 SAR software.
- Basic System Configuration Guide
  This guide provides an overview of the CLI and describes 7705 SAR boot options file (BOF) configuration, file system management, and basic system management such as node timing and synchronization.
- Interface Configuration Guide
  This guide describes the functionality of the 7705 SAR cards, modules, and ports and how to configure these components.
- MPLS Guide
  This guide describes how to configure MPLS, RSVP-TE, PCEP, and LDP protocols on the 7705 SAR.
- Quality of Service Guide
  This guide describes the Quality of Service (QoS) functionality provided by the 7705 SAR and how to configure and implement QoS on the router.
- Router Configuration Guide
  This guide describes how to configure logical IP routing interfaces, VRRP filtering, routing policies, and the cflowd tool on the 7705 SAR.
- Routing Protocols Guide
  This guide describes how to configure unicast routing protocols (OSFP, IS-IS, BGP, RIP) and multicast routing protocols (IGMP, MLD, PIM, MSDP) supported on the 7705 SAR.
- Services Guide
  This guide describes how to configure service parameters such as service access points (SAPs) and service destination points (SDPs), Layer 2 and Layer 3 services, security functions (IPSec), and encryption functions (NGE) on the 7705 SAR.
- System Management Guide
  This guide describes how to configure system security and access features, SNMP functionality, and event and accounting logs on the 7705 SAR.

Debug commands

anysec

Syntax

[no] anysec

Context

debug

Description

This command enables ANYsec debugging.

The no form of this command disables ANYsec debugging.

Default

no anysec

encryption-group

Syntax

encryption-group group-name peer ip-address | ipv6-address [detail]

Context

debug>anysec

Description

This command debugs ANYsec encryption groups.

Default

n/a

Parameters

group-name: the encryption group name, up to 32 characters

ip-address: specifies a peer IPv4 address

ipv6-address: specifies a peer IPv6 address

detail: keyword used to specify detailed information

peer

Syntax

peer ip-address | ipv6-address [detail]

Context

debug>anysec

Description

This command debugs ANYsec peers.

Default

n/a

Parameters

ip-address: specifies a peer IPv4 address

ipv6-address: specifies a peer IPv6 address

detail: keyword used to specify detailed information

October 29, 2025