y Commands
yang-modules
yang-modules
Syntax
yang-modules
Context
[Tree] (config>system>management-interface yang-modules)
Full Context
configure system management-interface yang-modules
Description
Commands in this context configure YANG module parameters.
The yang-modules settings affect the data sent in a NETCONF <hello>, data populated in the RFC 6022 /netconf-state/schemas list, data returned in a <get-schema> request, and data populated in the RFC 8525 /yang-library. See the 7450 ESS, 7750 SR, 7950 XRS, and VSR System Management Guide, sections ‟NETCONF Monitoring” and ‟YANG Library” for more information.
Platforms
All
yellow-differential-delay
yellow-differential-delay
Syntax
yellow-differential-delay yellow-diff-delay
no yellow-differential-delay
Context
[Tree] (config>port>multilink-bundle yellow-differential-delay)
Full Context
configure port multilink-bundle yellow-differential-delay
Description
This command sets the yellow warning threshold for the differential delay for members within a multilink bundle. If circuit’s delay exceeds the yellow-differential delay value, a log message and SNMP trap is sent. This command is only valid for MLPPP bundles. The differential delay is calculated as the round-trip differential delay for MLPPP bundles.
The no form of this command removes the yellow-differential-delay.
Parameters
- yellow-diff-delay
Specifies the maximum yellow differential delay threshold value, in milliseconds.
Platforms
7450 ESS, 7750 SR-7/12/12e