Home
Monitor and troubleshoot
Documents under this category provide information about monitoring, diagnosing, and troubleshooting router issues.
Log Events Guide
This guide provides information about log events.
ETH_CFM

Monitor and troubleshoot
Documents under this category provide information about monitoring, diagnosing, and troubleshooting router issues.
- Log Events Guide
  This guide provides information about log events.
- OAM and Diagnostics Guide
  This guide describes how to configure features such as service mirroring and Lawful Intercept (LI), and how to use the Operations, Administration, and Maintenance (OAM) and diagnostics tools.
- 7450 and 7750 Troubleshooting Guide
- 7950 Troubleshooting Guide
- Log Events Search Tool
  A searchable HTML list of the SR OS events.

ETH_CFM

dot1agCfmFaultAlarm

Table 1. dot1agCfmFaultAlarm properties
Property name	Value
Application name	ETH_CFM
Event ID	2001
Event name	dot1agCfmFaultAlarm
SNMP notification prefix and OID	IEEE8021-CFM-MIB.dot1agNotifications.1
Default severity	minor
Message format string	MEP $dot1agCfmMdIndex$/ $dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$ highest defect is now $dot1agCfmMepHighestPrDefect$
Cause	A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP has a persistent defect, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. If a defect with a higher priority is raised after a Fault Alarm has been issued, another Fault Alarm is issued. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the defect by the indices in the OID of the dot1agCfmMepHighestPrDefect variable in the notification: dot1agCfmMdIndex - Also the index of the MEP's Maintenance Domain table entry (dot1agCfmMdTable). dot1agCfmMaIndex - Also an index (with the MD table index) of the MEP's Maintenance Association network table entry (dot1agCfmMaNetTable), and (with the MD table index and component ID) of the MEP's MA component table entry (dot1agCfmMaCompTable). dot1agCfmMepIdentifier - MEP Identifier and final index into the MEP table (dot1agCfmMepTable). Reference: 802.1ag clause 12.14.7.7
Effect	N/A
Recovery	Investigation is required to determine the cause of the MEP alarm.

tmnxDot1agCfmMepAisStateChanged

Table 2. tmnxDot1agCfmMepAisStateChanged properties
Property name	Value
Application name	ETH_CFM
Event ID	2006
Event name	tmnxDot1agCfmMepAisStateChanged
SNMP notification prefix and OID	TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.5
Default severity	minor
Message format string	MEP $dot1agCfmMdIndex$/ $dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$
Cause	The tmnxDot1agCfmMepAisStateChanged notification is generated when a MEP enters or exits an AIS state.
Effect	N/A
Recovery	N/A

tmnxDot1agCfmMepCsfStateChanged

Table 3. tmnxDot1agCfmMepCsfStateChanged properties
Property name	Value
Application name	ETH_CFM
Event ID	2009
Event name	tmnxDot1agCfmMepCsfStateChanged
SNMP notification prefix and OID	TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.8
Default severity	minor
Message format string	Possible messages: MEP $dot1agCfmMdIndex$/$dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$ is clear of CSF state MEP $dot1agCfmMdIndex$/$dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$ is in CSF state
Cause	The tmnxDot1agCfmMepCsfStateChanged notification is generated when a MEP enters or exits a CSF state.
Effect	N/A
Recovery	N/A

tmnxDot1agCfmMepDMTestComplete

Table 4. tmnxDot1agCfmMepDMTestComplete properties
Property name	Value
Application name	ETH_CFM
Event ID	2005
Event name	tmnxDot1agCfmMepDMTestComplete
SNMP notification prefix and OID	TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.4
Default severity	minor
Message format string	$tmnxDot1agCfmMepDelayTestType$ test complete on MEP $dot1agCfmMdIndex$/$dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$: Delay= $tmnxDot1agCfmMepDelayTestDelay$us
Cause	The tmnxDot1agCfmMepDMTestComplete notification indicates that a One-Way-Delay-Test (OWDT) frame, or a Two-Way-Delay-Test (TWDT) response was received. For an OWDT frame, traps are raised only when a delay threshold of three seconds is exceeded.
Effect	N/A
Recovery	N/A

tmnxDot1agCfmMepEthTestComplete

Table 5. tmnxDot1agCfmMepEthTestComplete properties
Property name	Value
Application name	ETH_CFM
Event ID	2004
Event name	tmnxDot1agCfmMepEthTestComplete
SNMP notification prefix and OID	TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.3
Default severity	minor
Message format string	eth-test complete on MEP $dot1agCfmMdIndex$/$dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$: Bytes/Failed Bits/CRC Failures= $tmnxDot1agCfmMepCurrByteCount$/$tmnxDot1agCfmMepCurrFailedBits$/ $tmnxDot1agCfmMepCurrCrcFailures$
Cause	The tmnxDot1agCfmMepEthTestComplete notification indicates that an eth-test has been issued and results are ready. The tmnxDot1agCfmMepCurrByteCount indicates the number of bytes contained in the frame's Test TLV, and the tmnxDot1agCfmMepCurrFailedBits and tmnxDot1agCfmMepCurrCrcFailures indicate the failure state of the test. A value of Zero (0) for tmnxDot1agCfmMepCurrFailedBits and a value of 'false (2)' for tmnxDot1agCfmMepCurrCrcFailures indicates a successful test.
Effect	N/A
Recovery	N/A

tmnxDot1agCfmMepFcltyFaultClear

Table 6. tmnxDot1agCfmMepFcltyFaultClear properties
Property name	Value
Application name	ETH_CFM
Event ID	2011
Event name	tmnxDot1agCfmMepFcltyFaultClear
SNMP notification prefix and OID	TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.10
Default severity	warning
Message format string	ETH-CFM MEP facility fault cleared $tmnxDot1agCfmMepFcltyType$ $tmnxDot1agCfmMepFcltyInstance$
Cause	The tmnxDot1agCfmMepFcltyFaultClear notification is generated when the associated facility MEP has cleared an event affecting the specific tmnxDot1agCfmMepFcltyType tmnxDot1agCfmMepFcltyInstance combination over which it is configured.
Effect	This notification can be used to correlate the ETH_CFM dot1agCfmFaultAlarm event and the related IF-MIB::linkUp notification caused by the facility MEP.
Recovery	N/A

tmnxDot1agCfmMepFcltyFaultRaise

Table 7. tmnxDot1agCfmMepFcltyFaultRaise properties
Property name	Value
Application name	ETH_CFM
Event ID	2010
Event name	tmnxDot1agCfmMepFcltyFaultRaise
SNMP notification prefix and OID	TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.9
Default severity	warning
Message format string	ETH-CFM MEP facility fault raised $tmnxDot1agCfmMepFcltyType$ $tmnxDot1agCfmMepFcltyInstance$
Cause	The tmnxDot1agCfmMepFcltyFaultRaise notification is generated when the associated facility MEP dot1agCfmMepHighestPrDefect has increased.
Effect	This notification can be used to correlate the ETH_CFM dot1agCfmFaultAlarm event and the related IF-MIB::linkDown notification caused by the failure of the facility MEP.
Recovery	Follow the recovery for the dot1agCfmFaultAlarm and the related IF-MIB::linkDown caused by the failure of the facility MEP.

tmnxDot1agCfmMepLbmTestComplete

Table 8. tmnxDot1agCfmMepLbmTestComplete properties
Property name	Value
Application name	ETH_CFM
Event ID	2002
Event name	tmnxDot1agCfmMepLbmTestComplete
SNMP notification prefix and OID	TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.1
Default severity	minor
Message format string	loopback test results on MEP $dot1agCfmMdIndex$/$dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$ for $dot1agCfmMepTransmitLbmDestMacAddress$ are available (MEP admin-name = " $tmnxDot1agCfmMdAdminName$"/"$tmnxDot1agCfmMaNetAdminName$"/ $dot1agCfmMepIdentifier$)
Cause	The tmnxDot1agCfmMepLbmTestComplete notification indicates that a loopback test has been issued and results are ready.
Effect	N/A
Recovery	N/A

tmnxDot1agCfmMepLtmTestComplete

Table 9. tmnxDot1agCfmMepLtmTestComplete properties
Property name	Value
Application name	ETH_CFM
Event ID	2003
Event name	tmnxDot1agCfmMepLtmTestComplete
SNMP notification prefix and OID	TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.2
Default severity	minor
Message format string	linktrace test results with sequenceNumber $dot1agCfmMepTransmitLtmSeqNumber$ on MEP $dot1agCfmMdIndex$/ $dot1agCfmMaIndex$/$dot1agCfmMepIdentifier$ are now available (MEP admin-name = " $tmnxDot1agCfmMdAdminName$"/"$tmnxDot1agCfmMaNetAdminName$"/ $dot1agCfmMepIdentifier$)
Cause	The tmnxDot1agCfmMepLtmTestComplete notification indicates that a linktrace test has been issued and results are ready. The dot1agCfmMepTransmitLtmSeqNumber indicates the Transaction Identifier to use to retrieve the Link-trace results.
Effect	N/A
Recovery	N/A

tmnxDot1agCfmMepSLMTestComplete

Table 10. tmnxDot1agCfmMepSLMTestComplete properties
Property name	Value
Application name	ETH_CFM
Event ID	2008
Event name	tmnxDot1agCfmMepSLMTestComplete
SNMP notification prefix and OID	TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.7
Default severity	minor
Message format string	SLM $tmnxDot1agCfmMepSlmTestType$ (test-id $tmnxDot1agCfmMepSlmTestId$) completed for remote-mep $tmnxDot1agCfmMepSlmRemoteMepId$ remote MAC $tmnxDot1agCfmMepSlmRemoteMacAddr$
Cause	The tmnxDot1agCfmMepSLMTestComplete notification is generated when a one-way or two-way Synthetic Loss Measurement (SLM) test is completed. For one-way SLM test results, tmnxDot1agCfmMepSlmPacketLossOut and tmnxDot1agCfmMepSlmPacketUnack values are fixed at 'zero(0)'.
Effect	N/A
Recovery	N/A

tmnxDot1agCfmMipEvaluation

Table 11. tmnxDot1agCfmMipEvaluation properties
Property name	Value
Application name	ETH_CFM
Event ID	2007
Event name	tmnxDot1agCfmMipEvaluation
SNMP notification prefix and OID	TIMETRA-IEEE8021-CFM-MIB.tmnxDot1agNotifications.6
Default severity	minor
Message format string	Reevaluating MIPs on service $tmnxDot1agCfmNotifySvcId$ due to virtual MEP configuration
Cause	The tmnxDot1agCfmMipEvaluation notification is generated when a virtual MEP is created or deleted causing MIP reevaluation on the service. On virtual MEP creation, any MIPs in the service will be removed. On virtual MEP deletion, the MIPs are reevaluated.
Effect	N/A
Recovery	N/A

April 27, 2023