Home
Monitor and troubleshoot
Documents under this category provide information about monitoring, diagnosing, and troubleshooting router issues.
Log Events Guide
This guide provides information about log events.
SYSTEM

Monitor and troubleshoot
Documents under this category provide information about monitoring, diagnosing, and troubleshooting router issues.
- Log Events Guide
  This guide provides information about log events.
- OAM and Diagnostics Guide
  This guide describes how to configure features such as service mirroring and Lawful Intercept (LI), and how to use the Operations, Administration, and Maintenance (OAM) and diagnostics tools.
- 7450 and 7750 Troubleshooting Guide
- 7950 Troubleshooting Guide
- Log Events Search Tool
  A searchable HTML list of the SR OS events.

SYSTEM

mdCommitInProgress

Table 1. mdCommitInProgress properties
Property name	Value
Application name	SYSTEM
Event ID	2120
Event name	mdCommitInProgress
SNMP notification prefix and OID	N/A
Default severity	warning
Message format string	Commit by $userName$ ( $interface$) from $srcAddr$ is taking longer than expected - $reason$.
Cause	The mdCommitInProgress event is generated when a commit that is in progress on a model-driven interface is taking longer than expected to finish.
Effect	Additional commands may not be entered while the commit is in progress, and the session that issued the commit will wait until it finishes.
Recovery	No recovery is necessary.

mdSaveCommitHistoryFailed

Table 2. mdSaveCommitHistoryFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2087
Event name	mdSaveCommitHistoryFailed
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.91
Default severity	major
Message format string	$regionName$ commit history file write failed: $fileName$
Cause	Saving the commit history file failed because of an error.
Effect	The commit history file was not saved.
Recovery	Identify the cause of the failure and save the configuration to save the commit history.

persistenceRestoreProblem

Table 3. persistenceRestoreProblem properties
Property name	Value
Application name	SYSTEM
Event ID	2041
Event name	persistenceRestoreProblem
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.41
Default severity	minor
Message format string	Problem occurred while processing persistence record for $tmnxPersistencyClient$ - $tmnxPersistencyNotifyMsg$
Cause	The persistenceRestoreProblem notification is generated when an error is detected while processing a persistence record.
Effect	N/A
Recovery	N/A

persistencyClosedAlarmCleared

Table 4. persistencyClosedAlarmCleared properties
Property name	Value
Application name	SYSTEM
Event ID	2031
Event name	persistencyClosedAlarmCleared
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.31
Default severity	major
Message format string	Persistency-file on Card $tmnxPersistenceAffectedCpm$ for $tmnxPersistencyClient$ on device $tmnxPersistencyFileLocator$ is re-opened.$tmnxPersistencyNotifyMsg$
Cause	The output device used to store the persistence data is available for use again.
Effect	N/A
Recovery	N/A

persistencyClosedAlarmRaised

Table 5. persistencyClosedAlarmRaised properties
Property name	Value
Application name	SYSTEM
Event ID	2030
Event name	persistencyClosedAlarmRaised
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.30
Default severity	major
Message format string	Persistency-file on Card $tmnxPersistenceAffectedCpm$ for $tmnxPersistencyClient$ on device $tmnxPersistencyFileLocator$ is closed. Persistency across system reboot is no longer guaranteed. $tmnxPersistencyNotifyMsg$
Cause	The system was unable to store persistency data (e.g. because the storage device is inaccessible, or full)."
Effect	N/A
Recovery	N/A

persistencyEventReport

Table 6. persistencyEventReport properties
Property name	Value
Application name	SYSTEM
Event ID	2037
Event name	persistencyEventReport
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.37
Default severity	warning
Message format string	persistency event: $tmnxPersistencyNotifyMsg$
Cause	The system reported a subscriber management persistence event (e.g. the start and completion of a recovery action after system startup).
Effect	N/A
Recovery	N/A

persistencyFileSysThresCleared

Table 7. persistencyFileSysThresCleared properties
Property name	Value
Application name	SYSTEM
Event ID	2051
Event name	persistencyFileSysThresCleared
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.51
Default severity	major
Message format string	Filesystem on Card $tmnxPersistenceAffectedCpm$ for $tmnxPersistencyClient$ on device $tmnxPersistencyFileLocator$ has dropped below threshold level of 90 percent. $tmnxPersistencyNotifyMsg$
Cause	The persistencyFileSysThresCleared notification is generated when the filesystem drops below 90 percent occupation.
Effect	N/A
Recovery	N/A

persistencyFileSysThresRaised

Table 8. persistencyFileSysThresRaised properties
Property name	Value
Application name	SYSTEM
Event ID	2050
Event name	persistencyFileSysThresRaised
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.50
Default severity	major
Message format string	Filesystem on Card $tmnxPersistenceAffectedCpm$ for $tmnxPersistencyClient$ on device $tmnxPersistencyFileLocator$ has reached threshold level of 90 percent. $tmnxPersistencyNotifyMsg$
Cause	The persistencyFileSysThresRaised notification is generated when the filesystem reaches 90 percent occupation.
Effect	N/A
Recovery	N/A

sbiBootConfig

Table 9. sbiBootConfig properties
Property name	Value
Application name	SYSTEM
Event ID	2004
Event name	sbiBootConfig
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.4
Default severity	major
Message format string	Bootup configuration complete. Configuration status: $sbiConfigStatus$. SNMP Persistent Indexes status: $sbiPersistStatus$. System configured with persistent indexes: $sbiPersistIndex$.
Cause	The configuration phase following a system reboot has completed.
Effect	N/A
Recovery	No recovery is necessary.

sbiBootConfigFailFileError

Table 10. sbiBootConfigFailFileError properties
Property name	Value
Application name	SYSTEM
Event ID	2038
Event name	sbiBootConfigFailFileError
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.38
Default severity	major
Message format string	Unable to access the boot-bad-exec file $sbiBootConfigFailScript$
Cause	The bootup failed script file is not accessible.
Effect	N/A
Recovery	No recovery is necessary.

sbiBootConfigOKFileError

Table 11. sbiBootConfigOKFileError properties
Property name	Value
Application name	SYSTEM
Event ID	2039
Event name	sbiBootConfigOKFileError
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.39
Default severity	major
Message format string	Unable to access the boot-good-exec file $sbiBootConfigOKScript$
Cause	The bootup configuration OK script file was not accessible.
Effect	N/A
Recovery	No recovery is necessary.

sbiBootMdReadCommitHistoryFailed

Table 12. sbiBootMdReadCommitHistoryFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2088
Event name	sbiBootMdReadCommitHistoryFailed
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.92
Default severity	major
Message format string	$regionName$ commit history file read failed: $fileName$
Cause	Reading the commit history file failed because of an error.
Effect	The commit history file was not read.
Recovery	Identify the cause of the failure and reboot the system.

sbiBootSnmpd

Table 13. sbiBootSnmpd properties
Property name	Value
Application name	SYSTEM
Event ID	2005
Event name	sbiBootSnmpd
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.5
Default severity	major
Message format string	SNMP daemon initialization complete. System configured with persistent SNMP indexes: $sbiPersistIndex$. SNMP daemon administrative status: $sbiSnmpdAdminStatus$. SNMP daemon operational status: $sbiSnmpdOperStatus$.
Cause	The SNMP daemon initialization completed following a system reboot. Some system configuration and initialization errors might have resulted in the SNMP daemon being suspended.
Effect	N/A
Recovery	No recovery is necessary.

schedActionFailure

Table 14. schedActionFailure properties
Property name	Value
Application name	SYSTEM
Event ID	2101
Event name	schedActionFailure
SNMP notification prefix and OID	DISMAN-SCHEDULE-MIB.schedTraps.1
Default severity	major
Message format string	Schedule "$schedName$" created by " $schedOwner$" failed with error: $schedFailureText$
Cause	The invocation of a scheduled script-policy failed.
Effect	N/A
Recovery	N/A

smScriptAbort

Table 15. smScriptAbort properties
Property name	Value
Application name	SYSTEM
Event ID	2102
Event name	smScriptAbort
SNMP notification prefix and OID	DISMAN-SCRIPT-MIB.smTraps.1
Default severity	major
Message format string	The $tmnxSmRunExtAuthType$ operation failed or was aborted with error: $smRunError$. Run #$smRunIndex$ of script-policy "$smLaunchName$" created by owner " $smLaunchOwner$" was executed with the user account "$tmnxSmRunExtUserName$".
Cause	A running script terminated with an smRunExitCode not equal to `noError'.
Effect	N/A
Recovery	N/A

smScriptException

Table 16. smScriptException properties
Property name	Value
Application name	SYSTEM
Event ID	2104
Event name	smScriptException
SNMP notification prefix and OID	DISMAN-SCRIPT-MIB.smTraps.3
Default severity	minor
Message format string	The $tmnxSmRunExtAuthType$ operation completed with an exception: $smRunError$. Run #$smRunIndex$ of script-policy "$smLaunchName$" created by owner " $smLaunchOwner$" was executed with the user account "$tmnxSmRunExtUserName$"
Cause	A script run completed with an error. This event can be used by scripts to notify other management applications about script errors. This event is not automatically generated by the Script MIB implementation. It is the responsibility of the executing script or the runtime system to emit this notification where it is appropriate to do so.
Effect	N/A
Recovery	N/A

smScriptResult

Table 17. smScriptResult properties
Property name	Value
Application name	SYSTEM
Event ID	2103
Event name	smScriptResult
SNMP notification prefix and OID	DISMAN-SCRIPT-MIB.smTraps.2
Default severity	minor
Message format string	The $tmnxSmRunExtAuthType$ operation completed with the result: $smRunResult$. Run #$smRunIndex$ of script-policy "$smLaunchName$" created by owner " $smLaunchOwner$" was executed with the user account "$tmnxSmRunExtUserName$".
Cause	A script run completed. This event can be used by scripts to notify other management applications about results \ produced by the script. This event is not automatically generated by the Script MIB implementation. It is the responsibility of the executing script to emit this notification where it is appropriate to do so.
Effect	N/A
Recovery	N/A

sntpTimeDiffExceedsThreshold

Table 18. sntpTimeDiffExceedsThreshold properties
Property name	Value
Application name	SYSTEM
Event ID	2018
Event name	sntpTimeDiffExceedsThreshold
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.18
Default severity	major
Message format string	Time differential between the SNTP server $sntp_ip_address$ and the system exceeds 10 seconds
Cause	The time differential between the system and the SNTP server was more than 10 seconds. In this case the system clock was not automatically adjusted.
Effect	N/A
Recovery	N/A

socket_bind_failed

Table 19. socket_bind_failed properties
Property name	Value
Application name	SYSTEM
Event ID	2016
Event name	socket_bind_failed
SNMP notification prefix and OID	N/A
Default severity	critical
Message format string	Could not bind to a socket
Cause	A socket bind failed. There may be no sockets left in the system.
Effect	Cannot start new telnet/ftp sessions.
Recovery	Shutdown tasks that are consuming sockets.

socket_conn_accept_failed

Table 20. socket_conn_accept_failed properties
Property name	Value
Application name	SYSTEM
Event ID	2017
Event name	socket_conn_accept_failed
SNMP notification prefix and OID	N/A
Default severity	critical
Message format string	Could not accept a new connection
Cause	A socket connection attempt failed. There may be no sockets left in the system.
Effect	Cannot start new telnet/ftp sessions.
Recovery	Shutdown tasks that are consuming sockets.

ssiSaveBackgroundConfigFailed

Table 21. ssiSaveBackgroundConfigFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2113
Event name	ssiSaveBackgroundConfigFailed
SNMP notification prefix and OID	N/A
Default severity	major
Message format string	Complete configuration file background write failed: $fileName$ $reason$
Cause	A background complete configuration save was initiated by the system to aggregate incremental saved configuration file.
Effect	The complete configuration file could not be saved.
Recovery	Identify the cause of the failure and save the configuration.

ssiSaveBackgroundConfigSucceeded

Table 22. ssiSaveBackgroundConfigSucceeded properties
Property name	Value
Application name	SYSTEM
Event ID	2112
Event name	ssiSaveBackgroundConfigSucceeded
SNMP notification prefix and OID	N/A
Default severity	warning
Message format string	Complete configuration file saved in the background to: $fileName$
Cause	A background complete configuration save was initiated by the system to aggregate incremental saved configuration files.
Effect	The complete configuration file was saved.
Recovery	No recovery is necessary.

ssiSaveConfigFailed

Table 23. ssiSaveConfigFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2003
Event name	ssiSaveConfigFailed
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.3
Default severity	major
Message format string	Configuration file write failed: $fileName$ $reason$
Cause	Saving the configuration failed because of an error.
Effect	The configuration was not saved.
Recovery	Identify the cause of the failure and save the configuration.

ssiSaveConfigSucceeded

Table 24. ssiSaveConfigSucceeded properties
Property name	Value
Application name	SYSTEM
Event ID	2002
Event name	ssiSaveConfigSucceeded
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.2
Default severity	warning
Message format string	Configuration file saved to: $fileName$
Cause	Saving the configuration succeeded.
Effect	The configuration was saved.
Recovery	No recovery is necessary.

ssiSaveIncrementConfigFailed

Table 25. ssiSaveIncrementConfigFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2111
Event name	ssiSaveIncrementConfigFailed
SNMP notification prefix and OID	N/A
Default severity	major
Message format string	Incremental configuration file write failed: $fileName$ $reason$
Cause	An incremental configuration save was initiated.
Effect	The incremental configuration file could not be saved.
Recovery	Identify the cause of the failure and save the configuration.

ssiSaveIncrementConfigSucceeded

Table 26. ssiSaveIncrementConfigSucceeded properties
Property name	Value
Application name	SYSTEM
Event ID	2110
Event name	ssiSaveIncrementConfigSucceeded
SNMP notification prefix and OID	N/A
Default severity	warning
Message format string	Incremental configuration file saved to: $fileName$
Cause	An incremental configuration save was initiated.
Effect	The incremental configuration file was saved.
Recovery	No recovery is necessary.

ssiSyncBootEnvFailed

Table 27. ssiSyncBootEnvFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2015
Event name	ssiSyncBootEnvFailed
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.17
Default severity	critical
Message format string	Synchronization of boot environment files failed - $tmnxSyncFailureReason$
Cause	The synchronization of boot environment files was stopped due to errors.
Effect	Boot environment files were not synchronized.
Recovery	No recovery is necessary.

ssiSyncBootEnvOK

Table 28. ssiSyncBootEnvOK properties
Property name	Value
Application name	SYSTEM
Event ID	2014
Event name	ssiSyncBootEnvOK
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.16
Default severity	warning
Message format string	Boot environment files have been successfully synchronized
Cause	The synchronization of boot environment files finished without errors.
Effect	Boot environment files were synchronized.
Recovery	No recovery is necessary.

ssiSyncCertFailed

Table 29. ssiSyncCertFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2049
Event name	ssiSyncCertFailed
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.49
Default severity	major
Message format string	Synchronization of certificate file(s) failed - $tmnxSyncFailureReason$
Cause	The ssiSyncCertFailed event is generated when the synchronization of certificate files between the primary and secondary CPMs is stopped due to errors. The tmnxSyncFailureReason will state the reason for the failure.
Effect	Cert files are not synchronized.
Recovery	The user should try to determine the cause of the failure and can attempt synchronizing the files again.

ssiSyncCertOK

Table 30. ssiSyncCertOK properties
Property name	Value
Application name	SYSTEM
Event ID	2048
Event name	ssiSyncCertOK
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.48
Default severity	warning
Message format string	Cert file(s) have been successfully synchronized
Cause	The ssiSyncCertOK event is generated when the synchronization of certificate files between the primary and secondary CPMs finishes without errors.
Effect	Cert files are synchronized.
Recovery	No recovery is necessary.

ssiSyncConfigFailed

Table 31. ssiSyncConfigFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2013
Event name	ssiSyncConfigFailed
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.15
Default severity	critical
Message format string	Synchronization of configuration files failed - $tmnxSyncFailureReason$
Cause	The synchronization of configuration files was stopped due to errors.
Effect	Configuration files were not synchronized.
Recovery	No recovery is necessary.

ssiSyncConfigOK

Table 32. ssiSyncConfigOK properties
Property name	Value
Application name	SYSTEM
Event ID	2012
Event name	ssiSyncConfigOK
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.14
Default severity	warning
Message format string	Configuration files have been successfully synchronized
Cause	The synchronization of configuration files finished without errors.
Effect	Configuration files are synchronized.
Recovery	No recovery is necessary.

ssiSyncRollbackFailed

Table 33. ssiSyncRollbackFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2047
Event name	ssiSyncRollbackFailed
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.47
Default severity	critical
Message format string	Synchronization of rollback file(s) failed - $tmnxSyncFailureReason$
Cause	The ssiSyncRollbackFailed event is generated when the synchronization of rollback files between the primary and secondary CPMs is stopped due to errors. The tmnxSyncFailureReason will state the reason for the failure.
Effect	Rollback files are not synchronized.
Recovery	The user should try to determine the cause of the failure and can attempt synchronizing the files again.

ssiSyncRollbackOK

Table 34. ssiSyncRollbackOK properties
Property name	Value
Application name	SYSTEM
Event ID	2046
Event name	ssiSyncRollbackOK
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.46
Default severity	warning
Message format string	Rollback file(s) have been successfully synchronized
Cause	The ssiSyncRollbackOK event is generated when the synchronization of rollback files between the primary and secondary CPMs finishes without errors.
Effect	Rollback files are synchronized.
Recovery	No recovery is necessary.

stiDateAndTimeChanged

Table 35. stiDateAndTimeChanged properties
Property name	Value
Application name	SYSTEM
Event ID	2001
Event name	stiDateAndTimeChanged
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.1
Default severity	warning
Message format string	Date and time on the system is $stiDateAndTime$
Cause	The stiDateAndTimeChanged notification is generated when the time on the system is explicitly set.
Effect	The time on the system has been modified.
Recovery	No recovery is necessary.

stiDateAndTimeChanging

Table 36. stiDateAndTimeChanging properties
Property name	Value
Application name	SYSTEM
Event ID	2081
Event name	stiDateAndTimeChanging
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.86
Default severity	warning
Message format string	Date and time on the system is changing from $stiDateAndTime$
Cause	The stiDateAndTimeChanging notification is generated when the time on the node is explicitly set. It is raised before the time is changed so that the time of the change can be related to the original timescale. It shall be followed by the stiDateAndTimeChanged notification.
Effect	The time on the system is being changed.
Recovery	No recovery is necessary.

tMirrorLiXIfLicenseInvalid

Table 37. tMirrorLiXIfLicenseInvalid properties
Property name	Value
Application name	SYSTEM
Event ID	2086
Event name	tMirrorLiXIfLicenseInvalid
SNMP notification prefix and OID	TIMETRA-MIRROR-MIB.tMirrorNotifications.30
Default severity	minor
Message format string	TCP LI license invalid; please remove x-interface configuration $tMirrorLiNotifyLongDescription$
Cause	The system sends a tMirrorLiXIfLicenseInvalid notification when x-interfaces configuration is made while the system license does not support such configuration.
Effect	The values of the objects tMirrorLiX1OperState, tMirrorLiX1OperState and tMirrorLiX1OperState remain 'outOfService'.
Recovery	Remove any X-interfaces configuration.

tmnxConfigConflict

Table 38. tmnxConfigConflict properties
Property name	Value
Application name	SYSTEM
Event ID	2058
Event name	tmnxConfigConflict
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.58
Default severity	warning
Message format string	$tmnxNotifyObjectName$ configuration conflict
Cause	A configuration attribute associated with a row entry in a MIB table is in conflict with another attribute. This event can be used by the NMS to trigger maintenance polls of the configuration information.
Effect	N/A
Recovery	No recovery is necessary.

tmnxConfigCreate

Table 39. tmnxConfigCreate properties
Property name	Value
Application name	SYSTEM
Event ID	2007
Event name	tmnxConfigCreate
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.9
Default severity	warning
Message format string	$tmnxNotifyObjectName$ managed object created
Cause	A new row entry was created in one of the MIB tables. This event can be used by the NMS to trigger maintenance polls of the configuration information.
Effect	N/A
Recovery	No recovery is necessary.

tmnxConfigDelete

Table 40. tmnxConfigDelete properties
Property name	Value
Application name	SYSTEM
Event ID	2008
Event name	tmnxConfigDelete
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.10
Default severity	warning
Message format string	$tmnxNotifyObjectName$ managed object deleted
Cause	A existing row entry in one of the MIB tables was deleted. This event can be used by the NMS to trigger maintenance polls of the configuration information.
Effect	N/A
Recovery	No recovery is necessary.

tmnxConfigModify

Table 41. tmnxConfigModify properties
Property name	Value
Application name	SYSTEM
Event ID	2006
Event name	tmnxConfigModify
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.8
Default severity	warning
Message format string	$tmnxNotifyObjectName$ configuration modified
Cause	A configuration attribute associated with a row entry in a MIB table was modified. This event can be used by the NMS to trigger maintenance polls of the configuration information.
Effect	N/A
Recovery	No recovery is necessary.

tmnxEhsDroppedByMinDelay

Table 42. tmnxEhsDroppedByMinDelay properties
Property name	Value
Application name	SYSTEM
Event ID	2070
Event name	tmnxEhsDroppedByMinDelay
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.71
Default severity	minor
Message format string	The $tmnxSmRunExtAuthType$ operation failed with a min delay violation error: Mindelay = $tmnxEhsHEntryMinDelay$ is greater than Mindelay Interval: $tmnxEhsHEntryMinDelayInterval$. The script policy " $tmnxEhsHEntryScriptPlcyName$" created by the owner "$tmnxEhsHEntryScriptPlcyOwner$" was executed with cli-user account " $tmnxSmRunExtUserName$".
Cause	The tmnxEhsDroppedByMinDelay is generated when two consecutive executions of script policy specified by this Ehs event handler entry occurs within the time period specified by tmnxEhsHEntryMinDelay.
Effect	The value of tmnxEhsHEntryStatsErrMinDelay gets incremented. Execution of the script policy stops.
Recovery	No recovery is necessary.

tmnxEhsHandlerInvoked

Table 43. tmnxEhsHandlerInvoked properties
Property name	Value
Application name	SYSTEM
Event ID	2069
Event name	tmnxEhsHandlerInvoked
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.70
Default severity	minor
Message format string	Ehs handler :" $tmnxEhsHandlerName$" with the description : "$tmnxEhsHandlerDescription$" was invoked by the cli-user account " $tmnxSmRunExtUserName$".
Cause	The tmnxEhsHandlerInvoked notification is generated when the log event for a particular application-id and event-id/event name invokes EHS and creates a run Entry.
Effect	EHS might create a run entry to execute scripts.
Recovery	No recovery is necessary.

tmnxFtpClientFailure

Table 44. tmnxFtpClientFailure properties
Property name	Value
Application name	SYSTEM
Event ID	2034
Event name	tmnxFtpClientFailure
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.34
Default severity	minor
Message format string	Ftp client operation for destination $tmnxFtpFailureDestAddress$ failed with error message $tmnxFtpFailureMsg$
Cause	A file transfer operation initiated by the FTP client failed.
Effect	N/A
Recovery	N/A

tmnxLastSystemRebootAdmin

Table 45. tmnxLastSystemRebootAdmin properties
Property name	Value
Application name	SYSTEM
Event ID	2114
Event name	tmnxLastSystemRebootAdmin
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.74
Default severity	minor
Message format string	A reboot was administratively triggered at $tmnxLastSystemRebootTime$ by user $tmnxLastSystemRebootUser$ from $tmnxLastSystemRebootUserAddress$
Cause	The tmnxLastSystemRebootAdmin notification is generated when the reason for the last system reboot (as indicated by tmnxLastSystemRebootReason) was 'admin (1)'.
Effect	No effect.
Recovery	No recovery is necessary.

tmnxModuleMallocFailed

Table 46. tmnxModuleMallocFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2010
Event name	tmnxModuleMallocFailed
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.12
Default severity	major
Message format string	Memory allocation request for $tmnxModuleMallocSize$ bytes from module $tmnxMemoryModule$ failed
Cause	A request to allocate memory from a particular module failed because the memory module was short on memory and could not support the size that was requested.
Effect	N/A
Recovery	N/A

tmnxRedCpmActive

Table 47. tmnxRedCpmActive properties
Property name	Value
Application name	SYSTEM
Event ID	2028
Event name	tmnxRedCpmActive
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.28
Default severity	critical
Message format string	New active CPM card $cpmSlotName$ is ready to accept CLI configuration commands and SNMP SET requests.
Cause	Following a redundancy switchover the new active CPM has completed its audit and is ready to accept management commands via CLI or SNMP SET requests.
Effect	N/A
Recovery	N/A

tmnxRedSingleCpm

Table 48. tmnxRedSingleCpm properties
Property name	Value
Application name	SYSTEM
Event ID	2029
Event name	tmnxRedSingleCpm
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.29
Default severity	critical
Message format string	The active CPM card $cpmSlotName$ is operating in singleton mode. There is no standby CPM card.
Cause	In a system with a chassis with two CPM slots the active CPM could not detect a standby CPM in the chassis. When the operating state of TIMETRA-CHASSIS-MIB::tmnxCpmCardRedundant for the active CPM card transitions to a value of 'singleton (1)', this event is generated. When the active CPM later detects a standby CPM in the chassis, the ssiRedStandbySyncing event will be generated followed by a ssiRedStandbyReady event to indicate clearing of the CPM singleton state. The value of tmnxCpmCardRedundant will then transition to 'redundantActive (2)'."
Effect	N/A
Recovery	N/A

tmnxRedStandbyReady

Table 49. tmnxRedStandbyReady properties
Property name	Value
Application name	SYSTEM
Event ID	2025
Event name	tmnxRedStandbyReady
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.25
Default severity	major
Message format string	Redundancy synchronization with standby CPM card $cpmSlotName$ has completed. Standby CPM is ready.
Cause	The synchronization of redundancy information onto the standby CPM has completed.
Effect	The standby CPM is now ready to take over control of the system if the active CPM fails or a manual switchover command is issued.
Recovery	N/A

tmnxRedStandbySyncing

Table 50. tmnxRedStandbySyncing properties
Property name	Value
Application name	SYSTEM
Event ID	2024
Event name	tmnxRedStandbySyncing
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.24
Default severity	major
Message format string	Redundancy synchronization with standby CPM card $cpmSlotName$ is in progress.
Cause	Synchronization of redundancy information onto the standby CPM was started. tmnxChassisNotifyHwIndex identifies the standby CPM.
Effect	N/A
Recovery	N/A

tmnxRedStandbySyncLost

Table 51. tmnxRedStandbySyncLost properties
Property name	Value
Application name	SYSTEM
Event ID	2026
Event name	tmnxRedStandbySyncLost
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.26
Default severity	critical
Message format string	Redundancy synchronization with standby CPM card $cpmSlotName$ has been lost.
Cause	The active CPM lost communication with the standby CPM.
Effect	N/A
Recovery	N/A

tmnxRedSwitchover

Table 52. tmnxRedSwitchover properties
Property name	Value
Application name	SYSTEM
Event ID	2027
Event name	tmnxRedSwitchover
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.27
Default severity	critical
Message format string	Redundancy switchover from CPM card $cpmSlotName$ because $ssiRedFailoverReason$.
Cause	The standby CPM detected that the active CPM has failed.
Effect	The standby CPM prepared to take over as the new active CPM.
Recovery	N/A

tmnxSmLaunchStartFailed

Table 53. tmnxSmLaunchStartFailed properties
Property name	Value
Application name	SYSTEM
Event ID	2068
Event name	tmnxSmLaunchStartFailed
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.69
Default severity	minor
Message format string	Launch of $tmnxSmRunExtAuthType$ operation failed with error: $smLaunchError$. The script policy "$tmnxEhsHEntryScriptPlcyName$" created by the owner " $tmnxEhsHEntryScriptPlcyOwner$" was executed with cli-user account " $tmnxSmRunExtUserName$"
Cause	The tmnxSmLaunchStartFailed notification is generated when the launch start fails because : 1. The values of smLaunchScriptOwner and smLaunchScriptName don't have an existing entry in the smScriptTable. 2. The value of smScriptOperStatus is not 'enabled'. 3. The smScriptSource value is NULL. 4. The value of smLaunchOperStatus object in smLaunchTable is not 'enabled'. 5. The check to see if the run Index is already in use fails. 6. The number of currently executing scripts invoked from this smLaunchTable entry is greater than smLaunchMaxRunning.
Effect	The result is indicated by incrementing the value of tmnxEhsHEntryStatsErrLaunch.
Recovery	No recovery is necessary.

tmnxSnmpdStateChange

Table 54. tmnxSnmpdStateChange properties
Property name	Value
Application name	SYSTEM
Event ID	2023
Event name	tmnxSnmpdStateChange
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.23
Default severity	major
Message format string	The SNMP agent has changed state. Administrative state is $sbiSnmpdAdminStatus$ and operational state is $sbiSnmpdOperStatus$.
Cause	There was a change in either the administrative or operational state of the SNMP agent.
Effect	N/A
Recovery	N/A

tmnxSntpOperChange

Table 55. tmnxSntpOperChange properties
Property name	Value
Application name	SYSTEM
Event ID	2032
Event name	tmnxSntpOperChange
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.32
Default severity	major
Message format string	SNTP's operational status is $sntpOperStatus$
Cause	There was a change in the operational state of SNTP.
Effect	N/A
Recovery	N/A

tmnxSssiMismatch

Table 56. tmnxSssiMismatch properties
Property name	Value
Application name	SYSTEM
Event ID	2022
Event name	tmnxSssiMismatch
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.22
Default severity	major
Message format string	Synchronization between CPMs is disabled therefore persistent SNMP index files may not be in sync
Cause	In a system with redundant CPM cards, upon completion of the bootup configuration synchronization was 'disabled' but the boot options file (bof) specifies the system is to be booted with persistent SNMP indexes.
Effect	Boot environment files are not synchronized. Following a system failover, SNMP indexes may not have the same values.
Recovery	Enable synchronization.

tmnxStateChange

Table 57. tmnxStateChange properties
Property name	Value
Application name	SYSTEM
Event ID	2009
Event name	tmnxStateChange
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.11
Default severity	warning
Message format string	Status of $tmnxNotifyObjectName$ changed administrative state: $tmnxNotifyRowAdminState$, operational state: $tmnxNotifyRowOperState$
Cause	A change occurred in either the administrative or operational state of a MIB table entry.
Effect	N/A
Recovery	No recovery is necessary.

tmnxSysAppStats24HrsAvailable

Table 58. tmnxSysAppStats24HrsAvailable properties
Property name	Value
Application name	SYSTEM
Event ID	2071
Event name	tmnxSysAppStats24HrsAvailable
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.72
Default severity	warning
Message format string	New rows are available in the tmnxSysAppStats24HrsTable containing values collected at $tmnxSysNotifAppStatsTime$ for application $tmnxSysNotifAppStatsApplication$ type $tmnxSysNotifAppStatsType$
Cause	The system generates the tmnxSysAppStats24HrsAvailable notification when new rows are available in the tmnxSysAppStats24HrsTable. The value of tmnxSysNotifAppStatsTime indicates the time the system collected the values in the new rows. A non-zero value of tmnxSysNotifAppStatsApplication indicates the application; a zero value of tmnxSysNotifAppStatsApplication indicates that new values are available for all active applications. A non-zero value of tmnxSysNotifAppStatsType indicates the type of statistics; a zero value of tmnxSysNotifAppStatsType indicates that new values are available for all active types.
Effect	None.
Recovery	No recovery is necessary.

tmnxSysAppStatsWeekAvailable

Table 59. tmnxSysAppStatsWeekAvailable properties
Property name	Value
Application name	SYSTEM
Event ID	2072
Event name	tmnxSysAppStatsWeekAvailable
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.73
Default severity	warning
Message format string	New rows are available in the tmnxSysAppStatsWeekTable containing values collected at $tmnxSysNotifAppStatsTime$
Cause	The system generates the tmnxSysAppStatsWeekAvailable notification when new rows are available in the tmnxSysAppStatsWeekTable. The value of tmnxSysNotifAppStatsTime indicates the time the system collected the values in the new rows.
Effect	None.
Recovery	No recovery is necessary.

tmnxSysBaseMacAddressNotSet

Table 60. tmnxSysBaseMacAddressNotSet properties
Property name	Value
Application name	SYSTEM
Event ID	2067
Event name	tmnxSysBaseMacAddressNotSet
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.68
Default severity	major
Message format string	System base MAC address is not set. Using generated value of $tmnxChassisBaseMacAddress$ which may not be unique.
Cause	The tmnxSysBaseMacAddressNotSet notification is generated once after the system boots up and the value of sbiSystemBaseMacAddress is all zeroes.
Effect	The system software is using the base MAC address specified in tmnxChassisBaseMacAddress which may not be unique.
Recovery	Configure sbiSystemBaseMacAddress to a value other than all zeroes.

tmnxSysDyingGasp

Table 61. tmnxSysDyingGasp properties
Property name	Value
Application name	SYSTEM
Event ID	2090
Event name	tmnxSysDyingGasp
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.93
Default severity	critical
Message format string	System is going down
Cause	The tmnxSysDyingGasp notification is sent when the system goes down due to power loss. The system attempts to send this trap using the power remaining in the dying gasp capacitor.
Effect	System goes down.
Recovery	Restore power at site.

tmnxSysExecFinished

Table 62. tmnxSysExecFinished properties
Property name	Value
Application name	SYSTEM
Event ID	2053
Event name	tmnxSysExecFinished
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.53
Default severity	major
Message format string	Possible messages: The CLI user initiated '$tmnxLogExecRollbackOpType$' operation to process the commands in the SR OS CLI file $tmnxSysExecScript$ has completed with the result of $tmnxSysExecResult$ Processing of '$tmnxLogExecRollbackOpType$' configuration messages has completed with the result of $tmnxSysExecResult$
Cause	The tmnxSysExecFinished notification is generated upon the completion of the execution of a CLI command file or execution of 'vsd' configuration messages is completed. The value of tmnxSysExecScript indicates the command file when the value of tmnxLogExecRollbackOpType is 'exec' or an empty string when the value of tmnxLogExecRollbackOpType is 'vsd'. The value of tmnxLogExecRollbackOpIndex indicates the row entry in TIMETRA-LOG-MIB::tmnxLogExecRollbackOpTable for this CLI 'exec' or 'vsd' operation.
Effect	The effect is that the entry for the specified tmnxLogExecRollbackOpIndex won't be updated, and no further notifications will be added to the specified index in the logger.
Recovery	When the value of tmnxSysExecResult is 'none' or 'success', no recovery is required. When the value is 'fail', the system may be left in an inconsistent state and the user should try to determine the reason for the failure. The user can attempt a recovery by manually entering CLI commands to reverse the failed configuration. The user can attempt a recovery by performing a rollback revert to a known good checkpoint. The user can attempt a recovery by rebooting the system with the bof pointing to a saved configuration file."

tmnxSysExecStarted

Table 63. tmnxSysExecStarted properties
Property name	Value
Application name	SYSTEM
Event ID	2052
Event name	tmnxSysExecStarted
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.52
Default severity	major
Message format string	Possible messages: A CLI user has initiated an '$tmnxLogExecRollbackOpType$' operation to process the commands in the SR OS CLI file $tmnxSysExecScript$ Processing of '$tmnxLogExecRollbackOpType$' configuration messages has been initiated
Cause	The tmnxSysExecStarted notification is generated when the user initiates a CLI 'exec' operation to process a file of SROS CLI commands or processing of 'vsd' configuration messages have been initiated. The value of tmnxSysExecScript indicates the command file when the value of tmnxLogExecRollbackOpType is 'exec' or an empty string when the value of tmnxLogExecRollbackOpType is 'vsd'. The value of tmnxLogExecRollbackOpIndex indicates the row entry in TIMETRA-LOG-MIB::tmnxLogExecRollbackOpTable for this CLI 'exec' or 'vsd' operation.
Effect	All change notifications generated after the generation of this notification and before the tmnxSysExecFinished will be logged in the TIMETRA-LOG-MIB::tmnxLogExecRollbackEventEntry. Once the tmnxSysExecFinished notification is triggered, a Network Management System (NMS) is able to walk the aforementioned log table to retrieve the list of all objects that have been modified during this transaction.
Recovery	There is no recovery required for this notification.

tmnxSysHttpRdrOutOfSeqLimitExc

Table 64. tmnxSysHttpRdrOutOfSeqLimitExc properties
Property name	Value
Application name	SYSTEM
Event ID	2091
Event name	tmnxSysHttpRdrOutOfSeqLimitExc
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.94
Default severity	warning
Message format string	More than 10 out-of-sequence TCP packets received for TCP connection $tmnxSysAdditionalInfo$
Cause	The notification tmnxSysHttpRdrOutOfSeqLimitExc is sent when the value of the object tmnxSysHttpRdrCpmOptimizedMode is equal to 'true' and, for any given HTTP relay TCP connection, the number of - TCP sync packets (receive direction) or - TCP data packets (transmit direction) received out-of-sequence exceeds the limit of 10.
Effect	The out-of-sequence packets received for that connection are dropped.
Recovery	The root cause in the network must be found and fixed.

tmnxSysMgmtIfLiCfgNotEncrypted

Table 65. tmnxSysMgmtIfLiCfgNotEncrypted properties
Property name	Value
Application name	SYSTEM
Event ID	2080
Event name	tmnxSysMgmtIfLiCfgNotEncrypted
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.83
Default severity	minor
Message format string	li.cfg has failed to load at bootup, system expected the li.cfg to be encrypted
Cause	The tmnxSysMgmtIfLiCfgNotEncrypted notification is generated when the Lawful Intercept (LI) configuration file is not encrypted.
Effect	The Lawful Intercept (LI) configuration file is not loaded during the boot.
Recovery	Reboot with the correct Lawful Intercept (LI) configuration file

tmnxSysMgmtIfLiIncorrectFormat

Table 66. tmnxSysMgmtIfLiIncorrectFormat properties
Property name	Value
Application name	SYSTEM
Event ID	2079
Event name	tmnxSysMgmtIfLiIncorrectFormat
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.82
Default severity	minor
Message format string	LI config failed to load. The LI config is in the format '$sbiPrimaryConfigFileFormatType' and can only load if it matches the format of the primary configuration file '$sbiLiConfigFileFormatType'
Cause	The tmnxSysMgmtIfLiIncorrectFormat notification is generated when a format (classic or model-driven) of the Lawful Intercept (LI) configuration file does not match primary configuration file format.
Effect	The Lawful Intercept (LI) configuration file is not loaded during the boot.
Recovery	Reboot with the correct Lawful Intercept (LI) configuration file

tmnxSysMgmtIfModeChangeComplete

Table 67. tmnxSysMgmtIfModeChangeComplete properties
Property name	Value
Application name	SYSTEM
Event ID	2077
Event name	tmnxSysMgmtIfModeChangeComplete
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.79
Default severity	major
Message format string	Management interface configuration mode change to $tmnxSysMgmtIfWriteMode$ has completed.
Cause	The tmnxSysMgmtIfModeChangeComplete notification is generated when a management interface configuration mode change request is complete.
Effect	Switching modes between any configuration mode will lock the configuration datastores from operator input until the mode switch has completed. Once this event is triggered the configuration datastores are unlocked for operator input.
Recovery	None.

tmnxSysMgmtIfModeChangeFailure

Table 68. tmnxSysMgmtIfModeChangeFailure properties
Property name	Value
Application name	SYSTEM
Event ID	2078
Event name	tmnxSysMgmtIfModeChangeFailure
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.80
Default severity	major
Message format string	Management interface configuration mode change failed. The system is now in $tmnxSysMgmtIfWriteMode$ mode
Cause	The tmnxSysMgmtIfModeChangeFailure notification is generated when a management interface configuration mode change request fails to complete.
Effect	Switching modes between any configuration mode will lock the configuration datastores from operator input until the mode switch has completed. When this event is triggered the mode change is declared unsuccessful; the effective configuration mode will be indicated in this notification. The configuration datastores are unlocked for operator input.
Recovery	None.

tmnxSysMgmtIfModeChangeStart

Table 69. tmnxSysMgmtIfModeChangeStart properties
Property name	Value
Application name	SYSTEM
Event ID	2076
Event name	tmnxSysMgmtIfModeChangeStart
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.78
Default severity	major
Message format string	A management interface configuration mode change (reason $tmnxSysMgmtIfWriteSwitchReason$) from $tmnxNotifySysMgmtIfOriginalMode$ to $tmnxSysMgmtIfWriteMode$ was initiated.
Cause	The tmnxSysMgmtIfModeChangeStart notification is generated when a management interface configuration mode change request is sent.
Effect	Switching modes between any configuration mode will lock the configuration datastores from operator input until the mode switch has completed.
Recovery	None.

tmnxSysNvsysFileError

Table 70. tmnxSysNvsysFileError properties
Property name	Value
Application name	SYSTEM
Event ID	2056
Event name	tmnxSysNvsysFileError
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.56
Default severity	minor
Message format string	Failure to $tmnxSysFileErrorType$ file $fileName$
Cause	The tmnxSysNvsysFileError notification is generated when there is a failure in accessing the nvsys file as specified by tmnxSysFileErrorType.
Effect	The specified nvsys file operation is unsuccessful.
Recovery	The user should investigate why the failure occurred. A failure can indicate a problem with the compact flash.

tmnxSysRollbackDeleteStarted

Table 71. tmnxSysRollbackDeleteStarted properties
Property name	Value
Application name	SYSTEM
Event ID	2055
Event name	tmnxSysRollbackDeleteStarted
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.55
Default severity	minor
Message format string	Rollback delete of file $fileName$ started
Cause	The tmnxSysRollbackDeleteStarted notification is generated when the user initiates a rollback delete as specified by tmnxSysRollbackIndex and tmnxSysRollbackFileType.
Effect	The specified configuration file is deleted.
Recovery	There is no recovery required for this notification.

tmnxSysRollbackFileDeleteStatus

Table 72. tmnxSysRollbackFileDeleteStatus properties
Property name	Value
Application name	SYSTEM
Event ID	2045
Event name	tmnxSysRollbackFileDeleteStatus
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.45
Default severity	minor
Message format string	Rollback deletion of file $fileName$ $result$
Cause	The tmnxSysRollbackFileDeleteStatus notification is generated upon the completion of a rollback file delete as specified by tmnxSysRollbackIndex and tmnxSysRollbackFileType.
Effect	The result is indicated by the value of tmnxSysRollbackFileDeleteResult.
Recovery	When the value of tmnxSysRollbackFileDeleteResult is none, inProgress or success no recovery is required. When the value is failed, the user should try to determine the reason for the failure. The user can attempt a recovery by deleting the file again.

tmnxSysRollbackSaveStarted

Table 73. tmnxSysRollbackSaveStarted properties
Property name	Value
Application name	SYSTEM
Event ID	2054
Event name	tmnxSysRollbackSaveStarted
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.54
Default severity	minor
Message format string	Rollback save of file $fileName$ started
Cause	The tmnxSysRollbackSaveStarted notification is generated when the user initiates a rollback save as specified by tmnxSysRollbackFileType.
Effect	The specified configuration file is saved.
Recovery	There is no recovery required for this notification.

tmnxSysRollbackSaveStatusChange

Table 74. tmnxSysRollbackSaveStatusChange properties
Property name	Value
Application name	SYSTEM
Event ID	2044
Event name	tmnxSysRollbackSaveStatusChange
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.44
Default severity	major
Message format string	Rollback save of file $fileName$ $result$
Cause	The tmnxSysRollbackSaveStatusChange notification is generated upon the completion of a rollback save as specified by tmnxSysRollbackFileType.
Effect	The result is indicated by value of tmnxSysRollbackSaveResult.
Recovery	When the value of tmnxSysRollbackSaveResult is none, inProgress or success no recovery is required. When the value is failed, the user should try to determine the reason for the failure. The user can attempt a recovery by attempting the rollback save again.

tmnxSysRollbackStarted

Table 75. tmnxSysRollbackStarted properties
Property name	Value
Application name	SYSTEM
Event ID	2042
Event name	tmnxSysRollbackStarted
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.42
Default severity	major
Message format string	Rollback revert of file $fileName$ started
Cause	The tmnxSysRollbackStarted notification is generated when the user initiates a revert of the rollback checkpoint file specified by tmnxSysRollbackIndex and tmnxSysRollbackFileType.
Effect	The specified file is executed and system configuration may change.
Recovery	There is no recovery required for this notification.

tmnxSysRollbackStatusChange

Table 76. tmnxSysRollbackStatusChange properties
Property name	Value
Application name	SYSTEM
Event ID	2043
Event name	tmnxSysRollbackStatusChange
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.43
Default severity	critical
Message format string	Rollback revert of file $fileName$ $result$
Cause	The tmnxSysRollbackStatusChange notification is generated upon the completion of a rollback revert as specified by tmnxSysRollbackIndex and tmnxSysRollbackFileType.
Effect	The result is indicated by the value of tmnxSysRollbackResult.
Recovery	When the value of tmnxSysRollbackResult is none, inProgress or success no recovery is required. When the value is failed, the user should try to determine the reason for the failure. The user can attempt a recovery by reverting back to a known good checkpoint. The user may reboot the system with the bof pointing to a saved configuration file.

tmnxSysSwFabFailRecAborted

Table 77. tmnxSysSwFabFailRecAborted properties
Property name	Value
Application name	SYSTEM
Event ID	2084
Event name	tmnxSysSwFabFailRecAborted
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.89
Default severity	major
Message format string	Automatic switch fabric failure recovery aborted
Cause	The tmnxSysSwFabFailRecAborted notification is generated when the automatic switch fabric recovery process was aborted.
Effect	This may have been due to a problem with one of the SFMs resetting and may have left the router with reduced switch fabric capacity.
Recovery	Check to ensure all SFMs are fully operational. For any SFMs that are not operational, investigate manual recovery.

tmnxSysSwFabFailRecCompleted

Table 78. tmnxSysSwFabFailRecCompleted properties
Property name	Value
Application name	SYSTEM
Event ID	2083
Event name	tmnxSysSwFabFailRecCompleted
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.88
Default severity	cleared
Message format string	Automatic switch fabric failure recovery completed
Cause	The tmnxSysSwFabFailRecCompleted notification is generated when the automatic switch fabric recovery process has completed successfully.
Effect	The switch fabric has been returned to normal operation.
Recovery	No recovery is necessary.

tmnxSysSwFabFailRecDetected

Table 79. tmnxSysSwFabFailRecDetected properties
Property name	Value
Application name	SYSTEM
Event ID	2085
Event name	tmnxSysSwFabFailRecDetected
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.90
Default severity	major
Message format string	Automatic switch fabric failure recovery triggered
Cause	The tmnxSysSwFabFailRecDetected notification is generated when a condition has been detected within the router that might be resolved by the running of the automatic switch fabric recovery process.
Effect	If the automatic switch faric recovery process is enabled and all the required prerequisites are met, then the recovery process will start. If the automatic process is enabled but the recovery does not start, then the prerequisite conditions should be checked to determine what needs to be corrected to allow the process to run.
Recovery	No recovery is necessary.

tmnxSysSwFabFailRecStarted

Table 80. tmnxSysSwFabFailRecStarted properties
Property name	Value
Application name	SYSTEM
Event ID	2082
Event name	tmnxSysSwFabFailRecStarted
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.87
Default severity	major
Message format string	Automatic switch fabric failure recovery started
Cause	The tmnxSysSwFabFailRecStarted notification is generated when the router has initiated an automatic switch fabric recovery process based on detecting frequent failures to multiple IOM/XCMs. Such multiple failures could be caused by issues on the SFM so this process involves the sequential reset of the SFMs to attempt to clear the cause of the failures.
Effect	The router shall operate at reduced switch fabric capacity while each individual SFM is reset in turn.
Recovery	This process will run until all the SFMs have been processed. No recovery is necessary.

tmnxTrapDropped

Table 81. tmnxTrapDropped properties
Property name	Value
Application name	SYSTEM
Event ID	2011
Event name	tmnxTrapDropped
SNMP notification prefix and OID	TIMETRA-SYSTEM-MIB.tmnxSysNotifications.13
Default severity	major
Message format string	Possible messages: Dropped notification $tmnxDroppedTrapName$ for $tmnxDroppedTrapEntryName$ because of $tmnxTrapDroppedReasonCode$ Dropped notification $tmnxDroppedTrapName$ for $tmnxDroppedTrapEntryName$ because of $tmnxTrapDroppedReasonCode$ - $tmnxTrapDroppedCount$ traps dropped
Cause	A tmnxTrapDropped notification is generated when a trap is dropped for the reason specified by the reason code. The tmnxTrapDroppedEntryID identifies the table entry associated with the dropped trap. A nonzero value of the object tmnxTrapDroppedCount indicates the number of traps dropped for the current flow of traps, identified by the values of tmnxDroppedTrapID, tmnxTrapDroppedReasonCode and tmnxTrapDroppedEntryID.
Effect	N/A
Recovery	N/A

April 27, 2023