d Commands
dampening
dampening
Syntax
dampening
Context
[Tree] (clear>port>eth dampening)
Full Context
clear port ethernet dampening
Description
This command clears Exponential Port Dampening (EPD) accumulated penalties on the port.
Platforms
All
damping
damping
Syntax
damping [ip-prefix [/ip-prefix-length]] [ damp-type] [detail] [ ipv4]
damping [ip-prefix [/ip-prefix-length]] [ damp-type] [detail] { ipv6 | label-ipv4 | label-ipv6 | mcast-ipv4 | mcast-ipv6 | mvpn-ipv4 | vpn-ipv4 | vpn-ipv6}
Context
[Tree] (show>router>bgp damping)
Full Context
show router bgp damping
Description
This command displays BGP routes with have been dampened due to route flapping. This command can be entered with or without a route parameter.
When the keyword detail is included, more detailed information displays.
When only the command is entered (without any parameters included except detail), then all dampened routes are listed.
When a parameter is specified, then the matching route or routes are listed.
When a decayed, history, or suppressed keyword is specified, only those types of dampened routes are listed.
Parameters
- ip-prefix[ip-prefix-length]
-
Displays damping information for the specified IP prefix length.
- damp-type
-
Displays damping type for the specified IP address.
- decayed
-
Displays damping entries that are decayed but are not suppressed.
- history
-
Displays damping entries that are withdrawn but have history.
- suppressed
-
Displays damping entries suppressed because of route damping.
- detail
-
Displays detailed information.
- ipv4
-
Displays damped routes for the IPv4 family.
- ipv6
-
Displays damped routes for the IPv6 family.
- label-ipv4
-
Displays damped routes for the label IPv4 family.
- label-ipv6
-
Displays damped routes for the label IPv6 family.
- mcast-ipv4
-
Displays damped routes for the MCAST IPv4 family.
- mcast-ipv6
-
Displays damped routes for the MCAST IPv6 family.
- mvpn-ipv4
-
Displays damped routes for the MVPN IPv4 family.
- vpn-ipv4
-
Displays damped routes for the VPN IPv4 family.
- vpn-ipv6
-
Displays damped routes for the VPN IPv6 family.
Platforms
All
Output
The following output is an example of BGP damping information, and Show Damping Field Descriptions describes the output fields.
Sample Output*A:ALA-12# show router 3 bgp damping
==============================================================================
BGP Router ID : 10.0.0.14 AS : 65206 Local AS : 65206
==============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, - best
==============================================================================
BGP Damped Routes
==============================================================================
Flag Network From Reuse AS-Path
------------------------------------------------------------------------------
ud*i 10.149.7.0/24 10.0.28.1 00h00m00s 60203 65001 19855 3356
1239 22406
si 10.155.6.0/23 10.0.28.1 00h43m41s 60203 65001 19855 3356
2914 7459
si 10.155.8.0/22 10.0.28.1 00h38m31s 60203 65001 19855 3356
2914 7459
si 10.155.12.0/22 10.0.28.1 00h35m41s 60203 65001 19855 3356
2914 7459
si 10.155.22.0/23 10.0.28.1 00h35m41s 60203 65001 19855 3356
2914 7459
si 10.155.24.0/22 10.0.28.1 00h35m41s 60203 65001 19855 3356
2914 7459
si 10.155.28.0/22 10.0.28.1 00h34m31s 60203 65001 19855 3356
2914 7459
si 10.155.40.0/21 10.0.28.1 00h28m24s 60203 65001 19855 3356
7911 7459
si 10.155.48.0/20 10.0.28.1 00h28m24s 60203 65001 19855 3356
7911 7459
ud*i 10.8.140.0/24 10.0.28.1 00h00m00s 60203 65001 19855 3356
4637 17447
ud*i 10.8.141.0/24 10.0.28.1 00h00m00s 60203 65001 19855 3356
4637 17447
ud*i 10.9.0.0/18 10.0.28.1 00h00m00s 60203 65001 19855 3356
3561 9658 6163
. . .
ud*i 10.213.184.0/23 10.0.28.1 00h00m00s 60203 65001 19855 3356
6774 6774 9154
------------------------------------------------------------------------------
*A:ALA-12#
*A:ALA-12# show router 3 bgp damping detail
==============================================================================
BGP Router ID : 10.0.0.14 AS : 65206 Local AS : 65206
==============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * -
valid
Origin codes : i - IGP, e - EGP, ? - incomplete, - best
==============================================================================
BGP Damped Routes
==============================================================================
------------------------------------------------------------------------------
Network : 10.149.7.0/24
------------------------------------------------------------------------------
Network : 10.149.7.0/24 Peer : 10.0.28.1
NextHop : 10.0.28.1 Reuse time : 00h00m00s
Peer AS : 60203 Peer Router-Id : 10.32.27.203
Local Pref : none
Age : 00h22m09s Last update : 02d00h58m
FOM Present : 738 FOM Last upd. : 2039
Number of Flaps : 2 Flags : ud*i
Path : 60203 65001 19855 3356 1239 22406
Applied Policy : default-damping-profile
------------------------------------------------------------------------------
Network : 10.142.48.0/20
------------------------------------------------------------------------------
Network : 10.142.48.0/20 Peer : 10.0.28.1
NextHop : 10.0.28.1 Reuse time : 00h00m00s
Peer AS : 60203 Peer Router-Id : 10.32.27.203
Local Pref : none
Age : 00h00m38s Last update : 02d01h20m
FOM Present : 2011 FOM Last upd. : 2023
Number of Flaps : 2 Flags : ud*i
Path : 60203 65001 19855 3356 3561 5551 1889
Applied Policy : default-damping-profile
------------------------------------------------------------------------------
Network : 10.200.128.0/19
------------------------------------------------------------------------------
Network : 10.200.128.0/19 Peer : 10.0.28.1
NextHop : 10.0.28.1 Reuse time : 00h00m00s
Peer AS : 60203 Peer Router-Id : 10.32.27.203
Local Pref : none
Age : 00h00m38s Last update : 02d01h20m
FOM Present : 2011 FOM Last upd. : 2023
Number of Flaps : 2 Flags : ud*i
Path : 60203 65001 19855 1299 702 1889
Applied Policy : default-damping-profile
------------------------------------------------------------------------------
Network : 10.203.192.0/18
-------------------------------------------------------------------------------
Network : 10.203.192.0/18 Peer : 10.0.28.1
NextHop : 10.0.28.1 Reuse time : 00h00m00s
Peer AS : 60203 Peer Router-Id : 10.32.27.203
Local Pref : none
Age : 00h00m07s Last update : 02d01h20m
FOM Present : 1018 FOM Last upd. : 1024
Number of Flaps : 1 Flags : ud*i
Path : 60203 65001 19855 1299 702 1889
Applied Policy : default-damping-profile
------------------------------------------------------------------------------
*A:ALA-12#
*A:ALA-12# show router 3 bgp damping 10.203.192.0/18 detail
==============================================================================
BGP Router ID : 10.0.0.14 AS : 65206 Local AS : 65206
==============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, - best
==============================================================================
BGP Damped Routes 10.203.192.0/18
==============================================================================
Network : 10.203.192.0/18
------------------------------------------------------------------------------
Network : 10.203.192.0/18 Peer : 10.0.28.1
NextHop : 10.0.28.1 Reuse time : 00h00m00s
Peer AS : 60203 Peer Router-Id : 10.32.27.203
Local Pref : none
Age : 00h00m42s Last update : 02d01h20m
FOM Present : 2003 FOM Last upd. : 2025
Number of Flaps : 2 Flags : ud*i
Path : 60203 65001 19855 3356 702 1889
Applied Policy : default-damping-profile
------------------------------------------------------------------------------
Paths : 1
==============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 bgp damping suppressed detail
==============================================================================
BGP Router ID : 10.0.0.14 AS : 65206 Local AS : 65206
==============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, - best
==============================================================================
BGP Damped Routes (Suppressed)
==============================================================================
Network : 10.142.48.0/20
------------------------------------------------------------------------------
Network : 10.142.48.0/20 Peer : 10.0.28.1
NextHop : 10.0.28.1 Reuse time : 00h29m22s
Peer AS : 60203 Peer Router-Id : 10.32.27.203
Local Pref : none
Age : 00h01m28s Last update : 02d01h20m
FOM Present : 2936 FOM Last upd. : 3001
Number of Flaps : 3 Flags : si
Path : 60203 65001 19855 3356 702 1889
Applied Policy : default-damping-profile
------------------------------------------------------------------------------
Network : 10.200.128.0/19
------------------------------------------------------------------------------
Network : 10.200.128.0/19 Peer : 10.0.28.1
NextHop : 10.0.28.1 Reuse time : 00h29m22s
Peer AS : 60203 Peer Router-Id : 10.32.27.203
Local Pref : none
Age : 00h01m28s Last update : 02d01h20m
FOM Present : 2936 FOM Last upd. : 3001
Number of Flaps : 3 Flags : si
Path : 60203 65001 19855 3356 702 1889
Applied Policy : default-damping-profile
------------------------------------------------------------------------------
Network : 10.203.240.0/20
------------------------------------------------------------------------------
Network : 10.203.240.0/20 Peer : 10.0.28.1
NextHop : 10.0.28.1 Reuse time : 00h29m22s
Peer AS : 60203 Peer Router-Id : 10.32.27.203
Local Pref : none
Age : 00h01m28s Last update : 02d01h20m
FOM Present : 2936 FOM Last upd. : 3001
Number of Flaps : 3 Flags : si
Path : 60203 65001 19855 3356 702 1889
Applied Policy : default-damping-profile
------------------------------------------------------------------------------
Network : 10.206.0.0/17
------------------------------------------------------------------------------
Network : 10.206.0.0/17 Peer : 10.0.28.1
NextHop : 10.0.28.1 Reuse time : 00h29m22s
Peer AS : 60203 Peer Router-Id : 10.32.27.203
Local Pref : none
Age : 00h01m28s Last update : 02d01h20m
FOM Present : 2936 FOM Last upd. : 3001
Number of Flaps : 3 Flags : si
Path : 60203 65001 19855 3356 702 1889
Applied Policy : default-damping-profile
------------------------------------------------------------------------------
*A:ALA-12#
|
Label |
Description |
|---|---|
|
BGP Router ID |
The local BGP router ID. |
|
AS |
The configured autonomous system number. |
|
Local AS |
The configured or inherited local AS for the specified peer group. If not configured, then it is the same value as the AS. |
|
Network |
Route IP prefix and mask length for the route. |
|
Flag(s) |
Legend: Status codes: u- used, s-suppressed, h-history, d-decayed, *-valid. If a * is not present, then the status is invalid. Origin codes: i-IGP, e-EGP, ?-incomplete, >-best |
|
Network |
The IP prefix and mask length for the route. |
|
From |
The originator ID path attribute value. |
|
Reuse time |
The time when a suppressed route can be used again. |
|
AS Path |
The BGP AS path for the route. |
|
Peer |
The router ID of the advertising router. |
|
NextHop |
BGP nexthop for the route. |
|
Peer AS |
The autonomous system number of the advertising router. |
|
Peer Router-Id |
The router ID of the advertising router. |
|
Local Pref |
BGP local preference path attribute for the route. |
|
Age |
The time elapsed since the service was enabled. |
|
Last update |
The time when BGP was updated last in second/minute/hour (SS:MM:HH) format. |
|
FOM Present |
The current Figure of Merit (FOM) value. |
|
Number of Flaps |
The number of flaps in the neighbor connection. |
|
Reuse time |
The time when the route can be reused. |
|
Path |
The BGP AS path for the route. |
|
Applied Policy |
The applied route policy name. |
damping
Syntax
damping [{ip-prefix/ip-prefix-length] [neighbor ip-address]} | group name]
Context
[Tree] (clear>router>bgp damping)
Full Context
clear router bgp damping
Description
This command clears or resets the route damping information for received routes.
Parameters
- ip-prefix/ip-prefix-length
-
Clears damping information for entries that match the IP prefix and prefix length.
- neighbor ip-address
-
Clears damping information for entries received from the BGP neighbor.
- group name
-
Clears damping information for entries received from any BGP neighbors in the peer group.
Platforms
All
data-trigger
data-trigger
Syntax
data-trigger sap sap-id
Context
[Tree] (clear>service>dynsvc data-trigger)
Full Context
clear service dynamic-services data-trigger
Description
This command deletes all dynamic services associated with a dynamic services data trigger.
This command is not available in the MD-CLI.
Parameters
- sap-id
-
Specifies the dynamic services data trigger SAP to delete.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
data-triggers
data-triggers
Syntax
data-triggers [sap sap-id] [ summary]
Context
[Tree] (show>service>dynsvc data-triggers)
Full Context
show service dynamic-services data-triggers
Description
This command displays the active dynamic services data trigger details.
This command is not available in the MD-CLI.
Parameters
- sap-id
-
Specifies the dynamic services SAP for which the details are shown.
- summary
-
Limits the output to one line per data trigger SAP.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of data trigger information.
Sample Output# show service dynamic-services data-triggers
===============================================================================
Dynamic Services Data-triggers
===============================================================================
SAP : 1/1/4:1214.101
-------------------------------------------------------------------------------
Acct session-ID : 144DFF0000009156A24138
MAC : 00:51:00:dd:01:01
IP :
State : sapCreated
-------------------------------------------------------------------------------
No. of Data-triggers: 1
===============================================================================
Data Trigger Field Descriptions describes data trigger fields.
|
Output field |
Description |
|---|---|
|
Acct session-ID |
The RADIUS accounting session ID for this dynamic services data trigger. This accounting session ID is used as an accounting multi-session ID in RADIUS accounting for the associated dynamic services. It can also be used as a key in CoA or Disconnect Messages to set up or terminate associated dynamic services. |
|
MAC |
The MAC address learned to set up this dynamic service data trigger. The MAC address is included in the Access-Request message for RADIUS authentication. |
|
IP |
The IPv4 or IPv6 address learned to set up this dynamic service data trigger. If the data trigger packet was not an IP packet, then this field is empty. When available, the IP address is included in the RADIUS authentication and accounting messages. |
|
State |
The current state of the dynamic service data trigger: Pending—(initial state) data trigger received and authentication started Accepted—(transient state) authentication succeeded; dynsvc script started but not yet completed sapCreated—(final state) corresponding dynamic services sap created |
database
database
Syntax
database
Context
[Tree] (show>service>id>spb database)
Full Context
show service id spb database
Description
This command displays SPB database information.
Platforms
All
Output
The following output is an example of service SPB database information.
Sample Output*A:Dut-A# show service id 100001 spb database
===============================================================================
ISIS Database
===============================================================================
LSP ID Sequence Checksum Lifetime Attributes
-------------------------------------------------------------------------------
Displaying Level 1 database
-------------------------------------------------------------------------------
Dut-A.00-00 0xc 0xbaba 1103 L1
Dut-B.00-00 0x13 0xe780 1117 L1
Dut-C.00-00 0x13 0x85a 1117 L1
Dut-D.00-00 0xe 0x174a 1119 L1
Level (1) LSP Count : 4
===============================================================================
database
Syntax
database [group grp-ip-address] [source src-ip-address]] [family]
database evpn-mpls [group grp-ip-address] [ source src-ip-address] [family]
database sap sap-id [group grp-ip-address] [source src-ip-address] [ family]
database sdp sap-id:vc-id [group grp-ip-address] [source src-ip-address] [ family]
database vxlan vtep ip-address vni vni-id [group grp-ip-address] [source src-ip-address]] [family]
Context
[Tree] (clear>service>id>pim-snooping database)
Full Context
clear service id pim-snooping database
Description
This command clears PIM snooping source group database information.
Parameters
- sap-id
-
Clears PIM snooping SAP information
- sdp-id
-
Clears PIM snooping entries associated with the specified SDP. For a spoke-SDP, the VC ID must be specified; for a mesh SDP, the VC ID is optional.
- grp-ip-address
-
Clears PIM snooping information matching the specified group address
- src-ip-address
-
Clears PIM snooping information matching one particular source within the multicast group
- family
-
Displays either IPv4 or IPv6 information
- evpn-mpls
-
Clears PIM snooping statistics for EVPN-MPLS destinations
Platforms
All
database
Syntax
database [ip-address [/ mask] [longer]] [peer ip-address] [detail [qos]]
Context
[Tree] (show>router>rip database)
Full Context
show router rip database
Description
Displays all routes in the RIP database.
Parameters
- ip-address /mask
-
Specifies the IP address.
- longer
-
Specifies the longer prefix match entries should also be displayed.
- peer ip-address
-
Specifies the peer IP address.
- detail
-
Displays detailed information.
- qos
-
Specifies the QoS.
Platforms
All
Output
The following output is an example of RIP route database information, and Show RIP Database Field Descriptions describes the output fields.
Sample Output*A:ALA-1# show rip database
==============================================================================
RIP Route Database
==============================================================================
Destination Peer NextHop Metric Tag TTL Valid
------------------------------------------------------------------------------
10.0.0.10/32 10.1.7.15 0.0.0.0 2 0x0000 163 No
10.0.0.10/32 10.1.8.14 0.0.0.0 2 0x0000 179 No
10.0.0.14/32 10.1.8.14 0.0.0.0 1 0x0000 179 Yes
10.0.6.0/24 10.1.7.15 0.0.0.0 11 0x2002 163 No
10.0.6.0/24 10.1.8.14 0.0.0.0 11 0x2002 179 No
10.0.7.0/24 10.1.7.15 0.0.0.0 11 0x2002 163 No
10.0.7.0/24 10.1.8.14 0.0.0.0 11 0x2002 179 No
10.1.5.0/24 10.1.7.15 0.0.0.0 2 0x0000 151 Yes
10.1.5.0/24 10.1.8.14 0.0.0.0 1 0x0000 167 No
10.100.17.16/31 10.1.7.15 0.0.0.0 2 0x0000 151 No
10.100.17.16/31 10.1.8.14 0.0.0.0 2 0x0000 167 No
------------------------------------------------------------------------------
No. of Routes: 11
==============================================================================
*A:ALA-12#
|
Label |
Description |
|---|---|
|
Destination |
The RIP destination for the route. |
|
Peer |
The router ID of the peer router. |
|
NextHop |
The IP address of the next hop. |
|
Metric |
The hop count to rate the value of different hops. |
|
Tag |
The value to distinguish between internal routes (learned by RIP) and external routes (learned from other protocols). |
|
TTL |
Displays the number of seconds the specific route will remain in the routing table. When an entry reaches 0, it is removed from the routing table. |
|
Valid |
No — The route is not valid. Yes — The route is valid. |
database
Syntax
database
Context
[Tree] (clear>router>rip database)
Full Context
clear router rip database
Description
This command flushes all routes in the RIP database.
Platforms
All
database
Syntax
database [sub-domain sub-domain] [ template template-name]
Context
[Tree] (show>router>bier database)
Full Context
show router bier database
Description
This command shows the BIER database and assigned labels for <SD, BSL, SI>.
Parameters
- sub-domain
-
Displays detailed information about the sub-domain.
- template-name
-
Displays template name, up to 32 characters.
Platforms
All
Output
The following displays an example of a BIER database. Bier Database Fields provides BIER database field descriptions.
Sample Output*A:Dut-A# show router bier database
===============================================================================
BIER Database
===============================================================================
Template MT Sub-domain BSL
BFR-ID Start End Total
BFR-Prefix
-------------------------------------------------------------------------------
temp1 ipv4-unicast 0 256
1 1048464 1048479 16
10.20.1.1
temp1 ipv4-unicast 1 256
255 1048447 1048462 16
10.20.1.1
temp1 ipv4-unicast 2 256
2966 1048430 1048445 16
10.20.1.1
temp1 ipv4-unicast 3 256
1 1048413 1048428 16
10.20.1.1
temp1 ipv4-unicast 4 256
255 1048396 1048411 16
10.20.1.1
===============================================================================
BIER Database entries : 5
===============================================================================
*A:Dut-A#
|
Label |
Description |
|---|---|
|
Template |
The template name |
|
MT |
The IGP topology associated with the sub-domain |
|
Sub-domain |
The sub-domain ID |
|
BSL |
The BitStringLength used in the sub-domain |
|
BFR-ID |
The BFR ID which identifies the router in the BitString |
|
Start |
The start label allocated for this sub-domain |
|
End |
The end label allocated for this sub-domain |
|
Total |
The total number of labels allocated for this sub-domain |
|
BFR-Prefix |
The routable IP address of a BFR, used by BIER to identify a BFR |
database
Syntax
database [group grp-ip-address] [source src-ip-address]
database interface {ip-int-name | ip-address} [ group grp-ip-address] [source src-ip-address]
database host ip-address [group grp-ip-address] [ source src-ip-address]
database host all [group grp-ip-address] [ source src-ip-address]
database group-interface interface-name [ fwd-service service-id] [group grp-ip-address] [ source src-ip-address]
database group-interface all
Context
[Tree] (clear>router>igmp database)
Full Context
clear router igmp database
Description
This command clears IGMP or PIM database statistics on a specified interface or IP address.
Parameters
- group grp-ip-address
-
Clears the multicast group address (IPv4/IPv6) or zero in the specified address group.
- source src-ip-address
-
Clears the IGMP database from the specified source IP address.
- interface ip-int-name
-
Clears the IGMP database on the specified interface.
- interface ip-address
-
Clears the IGMP database on the specified IP address.
- host ip-address
-
Clears the IGMP database on the specified host.
- host all
-
Clears the IGMP database on all hosts.
- group-interface interface-name
-
Clears the IGMP database on the specified group interface.
- group-interface all
-
Clears the IGMP database on all group interfaces.
Platforms
All
database
Syntax
database [group ipv6-address [source ipv6-address]]
database interface {ip-int-name | ipv6-address]} [ group ipv6-address [source ipv6-address]]
database ipsec-interface ip-int-name [group ipv6-address [source ipv6-address]]
database host ipv6-address [group ipv6-address [ source ipv6-address]]
database host all [group ipv6-address [source ipv6-address]]
database group-interface interface-name [ fwd-service service-id] [group grp-ipv6-address [source ipv6-address]]
database group-interface all
Context
[Tree] (clear>router>mld database)
Full Context
clear router mld database
Description
This command clears MLD database parameters.
Parameters
- host ipv6-address
-
Clears the MLD database on the specified host.
- host all
-
Clears the MLD database on all hosts.
- interface ip-int-name
-
Clears database information for the specified MLD interface name.
- interface ipv6-address
-
Clears database information for the specified MLD interface IPv6 address.
- ipsec-interface ip-int-name
-
Clears database information for the specified dynamic name for the MLD-enabled child_SA.
- group ipv6-address
-
Clears database information for the specified MLD group IPv6 address.
- source ipv6-address
-
Clears database information for the specified MLD source IPv6 address.
- service-id
-
Clears database information for the specified service ID.
Platforms
All
database
Syntax
database [interface ip-int-name | mt-int-name | int-ip-address] [group grp-ip-address [source ip-address]] [family]
Context
[Tree] (clear>router>pim database)
Full Context
clear router pim database
Description
This command clears IGMP or PIM database statistics on a specified interface or IP address.
Parameters
- ip-int-name
-
Clears the IGMP or PIM database on the specified interface.
- mt-int-name
-
Clears the default core group address of the Multicast Distribution Tree (MDT) for the VPRN instance. The Multicast Tunnel (MT) interface for a VPRN is created when this object is set to a valid group address.
Syntax: vprn-id-mt-grp-ip-address
- int-ip-address
-
Clears the IGMP or PIM database on the specified IP address.
- group-ip-address
-
Clears the multicast group address (ipv4, ipv6) or zero in the specified address group.
- ip-address
-
Clears the IGMP or PIM database from the specified source IP address.
- family
-
Clears database family information.
- mpls-if-name
-
Clears the MPLS interface name.
Syntax: mpls-if-index
Platforms
All
database
Syntax
database
Context
[Tree] (show>router>p2mp-sr-tree database)
Full Context
show router p2mp-sr-tree database
Description
Commands in this context display P2MP SR tree database information.
Platforms
All
database
Syntax
database [family] [ip-prefix/ip-prefix-length] [up to prefix-length] [origin-as as-number]
database [family] [ip-prefix/ip-prefix-length] {longer}
database {summary}
database [family] [{static}
Context
[Tree] (show>router>origin-validation database)
Full Context
show router origin-validation database
Description
This command displays database information.
Parameters
- family
-
Specifies the type of routing information to be displayed.
- ip-prefix/ip-prefix-length
-
Displays routes only matching the specified IP address and length, up to 64 characters.
- prefix-length
-
Displays routes matching up to the specified length.
- as-number
-
Specifies the origin AS number.
- longer
-
Displays routes matching the ip-prefix-/ip-prefix-length and routes with longer masks.
- summary
-
Displays database summary information.
- static
-
Displays static routes.
Platforms
All
Output
The following output is an example of database information.
Sample OutputA:Dut-C# show router origin-validation database
===============================================================================
Static and Dynamic VRP Database Entries
===============================================================================
Prefix Range [Flags] Origin AS
Session IP [Flags]
-------------------------------------------------------------------------------
10.0.0.0/16-24 [Static-V] 65001
-
10.16.0.0/12-12 [Dynamic] 65002
10.168.1.1 [B]
-------------------------------------------------------------------------------
No. of VRP Database Entries: 2
-------------------------------------------------------------------------------
Flags: B = Base instance session
M = Management instance session
Static-V = Static-Valid; Static-I = Static-Invalid
===============================================================================
A:Dut-C# show router origin-validation database summary
===============================================================================
Static and Dynamic VRP Database Summary
===============================================================================
Type IPv4 Entries IPv6 Entries
-------------------------------------------------------------------------------
10.168.1.1 [B] 1 0
RPKI Server #1
Static 1 0
==============================================================================
database
Syntax
database [system-id | lsp-id] [detail] [ level level]
Context
[Tree] (show>router>isis database)
Full Context
show router isis database
Description
This command displays the entries in the IS-IS link state database.
Parameters
- system-id
-
Only the LSPs related to the specified system-id are listed. If no system-id or lsp-id are specified, all database entries are listed.
- lsp-id
-
Only the specified LSP (hostname) is listed. If no system-id or lsp-id are specified, all database entries are listed.
- level
-
Specifies the interface level (1, 2, or 1 and 2).
- detail
-
All output is displayed in the detailed format.
Platforms
All
Output
The following output is an example of the IS-IS link state database information, and IS-IS Link State Database Output Fields describes the output fields.
Sample Output*A:Dut-B# show router isis 0 database
===============================================================================
Rtr Base ISIS Instance 0 Database
===============================================================================
LSP ID Sequence Checksum Lifetime Attributes
-------------------------------------------------------------------------------
Displaying Level 1 database
-------------------------------------------------------------------------------
Dut-B.00-00 0x495 0x614e 711 L1L2
Dut-D.00-00 0x13b 0x1917 831 L1
Level (1) LSP Count : 2
Displaying Level 2 database
-------------------------------------------------------------------------------
Dut-A.00-00 0x4a6 0x214f 804 L1L2
Dut-B.00-00 0x4b7 0xe654 898 L1L2
Dut-C.00-00 0x4b2 0xa4f1 1166 L1L2
Level (2) LSP Count : 3
===============================================================================
*A:Dut-B#
*A:Dut-B#
*A:Dut-B# show router isis 0 database detail
===============================================================================
Rtr Base ISIS Instance 0 Database (detail)
===============================================================================
Displaying Level 1 database
-------------------------------------------------------------------------------
LSP ID : Dut-B.00-00 Level : L1
Sequence : 0x495 Checksum : 0x614e Lifetime : 706
Version : 1 Pkt Type : 18 Pkt Ver : 1
Attributes: L1L2 Max Area : 3 Alloc Len : 1492
SYS ID : 4900.0000.0002 SysID Len : 6 Used Len : 179
TLVs :
Area Addresses:
Area Address : (3) 49.0001
Supp Protocols:
Protocols : IPv4
IS-Hostname : Dut-B
Router ID :
Router ID : 10.20.1.2
Router Cap : 10.20.1.2, D:0, S:0
TE Node Cap : B E M P
SR Cap: IPv4 MPLS-IPv6
SRGB Base:20000, Range:10001
SR Alg: metric based SPF, 128
Node MSD Cap: BMI : 12 ERLD : 15
FAD Sub-Tlv:
Flex-Algorithm : 128
Metric-Type : delay
Calculation-Type : 0
Priority : 100
Flags: M
I/F Addresses :
I/F Address : 10.20.1.2
I/F Address : 10.10.10.13
TE IS Nbrs :
Nbr : Dut-D.00
Default Metric : 10
Sub TLV Len : 30
IF Addr : 10.10.10.13
Nbr IP : 10.10.10.14
TE APP LINK ATTR :
SABML-flag:Non-Legacy SABM-flags: X
Delay : 100
Adj-SID: Flags:v4VL Weight:0 Label:524285
TE IP Reach :
Default Metric : 0
Control Info: S, prefLen 32
Prefix : 10.20.1.2
Sub TLV :
Prefix-SID Index:2, Algo:0, Flags:NnP
Prefix-SID Index:12, Algo:128, Flags:NnP
Default Metric : 10
Control Info: , prefLen 30
Prefix : 10.10.10.12
-------------------------------------------------------------------------------
LSP ID : Dut-D.00-00 Level : L1
Sequence : 0x13b Checksum : 0x1917 Lifetime : 827
Version : 1 Pkt Type : 18 Pkt Ver : 1
Attributes: L1 Max Area : 3 Alloc Len : 179
SYS ID : 4900.0000.0004 SysID Len : 6 Used Len : 179
TLVs :
Area Addresses:
Area Address : (3) 49.0001
Supp Protocols:
Protocols : IPv4
IS-Hostname : Dut-D
Router ID :
Router ID : 10.20.1.4
Router Cap : 10.20.1.4, D:0, S:0
TE Node Cap : B E M P
SR Cap: IPv4 MPLS-IPv6
SRGB Base:20000, Range:10001
SR Alg: metric based SPF, 128
Node MSD Cap: BMI : 12 ERLD : 15
FAD Sub-Tlv:
Flex-Algorithm : 128
Metric-Type : delay
Calculation-Type : 0
Priority : 50
Flags: M
I/F Addresses :
I/F Address : 10.20.1.4
I/F Address : 10.10.10.14
TE IS Nbrs :
Nbr : Dut-B.00
Default Metric : 10
Sub TLV Len : 30
IF Addr : 10.10.10.14
Nbr IP : 10.10.10.13
TE APP LINK ATTR :
SABML-flag:Non-Legacy SABM-flags: X
Delay : 100
Adj-SID: Flags:v4VL Weight:0 Label:524287
TE IP Reach :
Default Metric : 0
Control Info: S, prefLen 32
Prefix : 10.20.1.4
Sub TLV :
Prefix-SID Index:4, Algo:0, Flags:NnP
Prefix-SID Index:14, Algo:128, Flags:NnP
Default Metric : 10
Control Info: , prefLen 30
Prefix : 10.10.10.12
Level (1) LSP Count : 2
Displaying Level 2 database
-------------------------------------------------------------------------------
LSP ID : Dut-A.00-00 Level : L2
Sequence : 0x4a6 Checksum : 0x214f Lifetime : 798
Version : 1 Pkt Type : 20 Pkt Ver : 1
Attributes: L1L2 Max Area : 3 Alloc Len : 220
SYS ID : 4900.0000.0001 SysID Len : 6 Used Len : 220
TLVs :
Area Addresses:
Area Address : (3) 49.0001
Supp Protocols:
Protocols : IPv4
IS-Hostname : Dut-A
Router ID :
Router ID : 10.20.1.1
Router Cap : 10.20.1.1, D:0, S:0
TE Node Cap : B E M P
SR Cap: IPv4 MPLS-IPv6
SRGB Base:20000, Range:10001
SR Alg: metric based SPF, 128
Node MSD Cap: BMI : 12 ERLD : 15
I/F Addresses :
I/F Address : 10.20.1.1
I/F Address : 10.10.10.1
I/F Address : 10.10.10.5
TE IS Nbrs :
Nbr : Dut-C.00
Default Metric : 10
Sub TLV Len : 30
IF Addr : 10.10.10.5
Nbr IP : 10.10.10.6
TE APP LINK ATTR :
SABML-flag:Non-Legacy SABM-flags: X
Delay : 100
Adj-SID: Flags:v4VL Weight:0 Label:524286
TE IS Nbrs :
Nbr : Dut-B.00
Default Metric : 10
Sub TLV Len : 24
IF Addr : 10.10.10.1
Nbr IP : 10.10.10.2
TE APP LINK ATTR :
SABML-flag:Non-Legacy SABM-flags: X
Adj-SID: Flags:v4VL Weight:0 Label:524285
TE IP Reach :
Default Metric : 10
Control Info: , prefLen 30
Prefix : 10.10.10.0
Default Metric : 0
Control Info: S, prefLen 32
Prefix : 10.20.1.1
Sub TLV :
Prefix-SID Index:1, Algo:0, Flags:NnP
Prefix-SID Index:11, Algo:128, Flags:NnP
Default Metric : 10
Control Info: , prefLen 30
Prefix : 10.10.10.4
-------------------------------------------------------------------------------
LSP ID : Dut-B.00-00 Level : L2
Sequence : 0x4b7 Checksum : 0xe654 Lifetime : 891
Version : 1 Pkt Type : 20 Pkt Ver : 1
Attributes: L1L2 Max Area : 3 Alloc Len : 1492
SYS ID : 4900.0000.0002 SysID Len : 6 Used Len : 271
TLVs :
Area Addresses:
Area Address : (3) 49.0001
Supp Protocols:
Protocols : IPv4
IS-Hostname : Dut-B
Router ID :
Router ID : 10.20.1.2
Router Cap : 10.20.1.2, D:0, S:0
TE Node Cap : B E M P
SR Cap: IPv4 MPLS-IPv6
SRGB Base:20000, Range:10001
SR Alg: metric based SPF, 128
Node MSD Cap: BMI : 12 ERLD : 15
FAD Sub-Tlv:
Flex-Algorithm : 128
Metric-Type : delay
Calculation-Type : 0
Priority : 100
Flags: M
I/F Addresses :
I/F Address : 10.20.1.2
I/F Address : 10.10.10.2
I/F Address : 10.10.10.9
TE IS Nbrs :
Nbr : Dut-C.00
Default Metric : 10
Sub TLV Len : 30
IF Addr : 10.10.10.9
Nbr IP : 10.10.10.10
TE APP LINK ATTR :
SABML-flag:Non-Legacy SABM-flags: X
Delay : 100
Adj-SID: Flags:v4VL Weight:0 Label:524286
TE IS Nbrs :
Nbr : Dut-A.00
Default Metric : 10
Sub TLV Len : 24
IF Addr : 10.10.10.2
Nbr IP : 10.10.10.1
TE APP LINK ATTR :
SABML-flag:Non-Legacy SABM-flags: X
Adj-SID: Flags:v4VL Weight:0 Label:524284
TE IP Reach :
Default Metric : 10
Control Info: , prefLen 30
Prefix : 10.10.10.0
Default Metric : 0
Control Info: S, prefLen 32
Prefix : 10.20.1.2
Sub TLV :
Prefix-SID Index:2, Algo:0, Flags:NnP
Prefix-SID Index:12, Algo:128, Flags:NnP
Default Metric : 10
Control Info: , prefLen 30
Prefix : 10.10.10.8
Default Metric : 10
Control Info: , prefLen 30
Prefix : 10.10.10.12
Default Metric : 10
Control Info: S, prefLen 32
Prefix : 10.20.1.4
Sub TLV :
Prefix-SID Index:4, Algo:0, Flags:RNnP
Prefix-SID Index:14, Algo:128, Flags:RNnP
Prefix-Metric-FlexAlg Algo:128, Metric:100
-------------------------------------------------------------------------------
LSP ID : Dut-C.00-00 Level : L2
Sequence : 0x4b2 Checksum : 0xa4f1 Lifetime : 1158
Version : 1 Pkt Type : 20 Pkt Ver : 1
Attributes: L1L2 Max Area : 3 Alloc Len : 226
SYS ID : 4900.0000.0003 SysID Len : 6 Used Len : 226
TLVs :
Area Addresses:
Area Address : (3) 49.0001
Supp Protocols:
Protocols : IPv4
IS-Hostname : Dut-C
Router ID :
Router ID : 10.20.1.3
Router Cap : 10.20.1.3, D:0, S:0
TE Node Cap : B E M P
SR Cap: IPv4 MPLS-IPv6
SRGB Base:20000, Range:10001
SR Alg: metric based SPF, 128
Node MSD Cap: BMI : 12 ERLD : 15
I/F Addresses :
I/F Address : 10.20.1.3
I/F Address : 10.10.10.6
I/F Address : 10.10.10.10
TE IS Nbrs :
Nbr : Dut-A.00
Default Metric : 10
Sub TLV Len : 30
IF Addr : 10.10.10.6
Nbr IP : 10.10.10.5
TE APP LINK ATTR :
SABML-flag:Non-Legacy SABM-flags: X
Delay : 100
Adj-SID: Flags:v4VL Weight:0 Label:524287
TE IS Nbrs :
Nbr : Dut-B.00
Default Metric : 10
Sub TLV Len : 30
IF Addr : 10.10.10.10
Nbr IP : 10.10.10.9
TE APP LINK ATTR :
SABML-flag:Non-Legacy SABM-flags: X
Delay : 100
Adj-SID: Flags:v4VL Weight:0 Label:524286
TE IP Reach :
Default Metric : 0
Control Info: S, prefLen 32
Prefix : 10.20.1.3
Sub TLV :
Prefix-SID Index:3, Algo:0, Flags:NnP
Prefix-SID Index:13, Algo:128, Flags:NnP
Default Metric : 10
Control Info: , prefLen 30
Prefix : 10.10.10.4
Default Metric : 10
Control Info: , prefLen 30
Prefix : 10.10.10.8
Level (2) LSP Count : 3
-------------------------------------------------------------------------------
Control Info : D = Prefix Leaked Down
S = Sub-TLVs Present
Attribute Flags : N = Node Flag
R = Re-advertisement Flag
X = External Prefix Flag
E = Entropy Label Capability (ELC) Flag
Adj-SID Flags : v4/v6 = IPv4 or IPv6 Address-Family
B = Backup Flag
V = Adj-SID carries a value
L = value/index has local significance
S = Set of Adjacencies
P = Persistently allocated
Prefix-SID Flags : R = Re-advertisement Flag
N = Node-SID Flag
nP = no penultimate hop POP
E = Explicit-Null Flag
V = Prefix-SID carries a value
L = value/index has local significance
Lbl-Binding Flags: v4/v6 = IPv4 or IPv6 Address-Family
M = Mirror Context Flag
S = SID/Label Binding flooding
D = Prefix Leaked Down
A = Attached Flag
SABM-flags Flags: R = RSVP-TE
S = SR-TE
F = LFA
X = FLEX-ALGO
FAD-flags Flags: M = Prefix Metric
===============================================================================
*A:Dut-B#
|
Label |
Description |
|---|---|
|
Flex-Algorithm |
The flexible algorithm number |
|
Priority |
Displays the FAD priority; It is the tiebreaker when multiple FADs are received |
|
Metric Type |
The metric used by the winning FAD igp — the IGP metric is used te-metric — the TE metric is used delay — the delay metric is used |
|
Calculation Type |
Displays the calculation type; for SPF a zero value is only defined |
|
Prefix SID Flags |
Displays the prefix SID flags |
|
Fad Flags |
Displays the FAD Flags; the M-flag is used for inter-area; when set, the metric must be used for inter-area traffic to avoid loops and blackhole traffic on ABR/ASBR |
database
Syntax
database [system-id]
Context
[Tree] (clear>router>isis database)
Full Context
clear router isis database
Description
This command removes the entries from the IS-IS link-state database which contains information about PDUs.
Parameters
- system-id
-
When the system ID is entered, only the specified entries are removed from the IS-IS link-state database.
Platforms
All
database
Syntax
database [type {router | network | summary | asbr-summary | external | nssa | all}] [area area-id] [ adv-router router-id] [link-state-id] [detail] [filtered]
database [type {router | network | inter-area-pfx | inter-area-rtr | external | nssa | intra-area-pfx | rtr-info | all}] [area area-id] [adv-router router-id] [link-state-id] [ detail] [filtered]
Context
[Tree] (show>router>ospf database)
[Tree] (show>router>ospf3 database)
Full Context
show router ospf database
show router ospf3 database
Description
This command displays information about the OSPF link state database (LSDB).
When no command line options are specified, the command displays brief output for all database entries.
Parameters
- type keyword
-
Specifies to filter the OSPF LSDB information based on the type specified by keyword.
- router
-
Displays only router (Type 1) LSAs in the LSDB.
- network
-
Displays only network (Type 2) LSAs in the LSDB.
- summary
-
Displays only summary (Type 3) LSAs in the LSDB.
- asbr-summary
-
Displays only ASBR summary (Type 4) LSAs in the LSDB.
- external
-
Displays only AS external (Type 5) LSAs in the LSDB. External LSAs are maintained globally and not per area. If the display of external links is requested, the area parameter, if present, is ignored.
- nssa
-
Displays only NSSA area-specific AS external (Type 7) LSAs in the LSDB.
- inter-area-pfx
-
Displays inter-area prefix LSAs.
- inter-area-rtr
-
Displays inter-area router LSAs.
- intra-area-pfx
-
Displays intra-area prefix LSAs.
- rtr-info
-
Displays router info LSAs.
- all
-
Displays all LSAs in the LSDB. The all keyword is intended to be used with either the area area-id or the adv-router router-id [link-state-id] parameters.
- area area-id
-
Displays LSDB information associated with the specified OSPF area-id.
- adv-router router-id [link-state-id]
-
Displays LSDB information associated with the specified advertising router. To further narrow the number of items displayed, the link-state-id can optionally be specified.
- detail
-
Displays detailed information on the LSDB entries.
- filtered
-
Displays LSDB entries that were filtered by an area import or export policy.
Platforms
All
Output
OSPF Database Output
OSPF Database Output Fields describes the standard and detailed command output fields for an OSPF database.
|
Label |
Description |
|---|---|
|
Area Id |
The OSPF area identifier. |
|
Type LSA Type |
Router — LSA type of router (OSPF) Network — LSA type of network (OSPF) Summary — LSA type of summary (OSPF) ASBR Summary — LSA type of ASBR summary (OSPF) Nssa-ext — LSA area-specific, NSSA external (OSPF) Area opaque — LSA type of area opaque (OSPF) router — LSA type of router (OSPF3) Network — LSA type of network (OSPF3) IE Pfx — LSA type of inter-area prefix (OSPF3) Newline IE Rtr LSA type of inter-area router (OSPF3) IA Pfx — LSA type of intra-area prefix (OSPF3) |
|
Link State Id |
The link state Id is an LSA type specific field containing either a number to distinguish several LSAs from the same router, an interface ID, or a router-id; it identifies the piece of the routing domain being described by the advertisement. |
|
Adv Rtr Id Adv Router Id |
The router identifier of the router advertising the LSA. |
|
Age |
The age of the link state advertisement in seconds. |
|
Sequence Sequence No |
The signed 32-bit integer sequence number. |
|
Cksum Checksum |
The 32-bit unsigned sum of the link-state advertisements' LS checksums. |
|
No. of LSAs |
The number of LSAs displayed. |
|
Options |
EA — External Attribute LSA Support DC — Demand Circuit Support R — If clear, a node can participate in OSPF topology distribution without being used to forward transit traffic. N — Type 7 LSA Support MC — Multicast Support E — External Routes Support V6 — V6 works in conjunction with R. If V6 is clear, a node can participate in OSPF topology distribution without being used to forward IPv6 datagrams. If R is set and V6 is clear, IPv6 datagrams are not forwarded but diagrams belonging to another protocol family may be forwarded. |
|
Prefix Options |
P — Propagate NSSA LSA. MC — Multicast support. LA — Local address capability. If set, the prefix is an IPv6 interface address of the advertising router. NU — No unicast capability. If set, the prefix is excluded from IPv6 unicast calculations. |
|
Flags |
None — No flags set V — The router is an endpoint for one or more fully adjacent Virtual Links having the described area as the transit area E — The router is an AS Boundary Router B — The router is an Area Border Router |
|
Link Count |
The number of links advertised in the LSA. |
|
Link Type (n) |
The link type of the nth link in the LSA. |
|
Network (n) |
The network address of the nth link in the LSA. |
|
Mask (n) |
The mask of the nth link in the LSA. |
|
No of TOS (n) |
The ToS of the nth link in the LSA. |
|
Metric-0 (n) |
The cost metric of the nth link in the LSA. |
|
Not Flooded (n) |
Filtered on Import The nth LSA was filtered by an area import policy. Filtered on Export The nth LSA was filtered by an area export policy. Note: this line does not appear if there is no filtering and the LSA was flooded. |
A:ALA-A# show router ospf 1 database
===============================================================================
Rtr Base OSPFv2 Instance 1 Link State Database (type : All)
===============================================================================
Area Id Type Link State Id Adv Rtr Id Age Sequence Cksum
-------------------------------------------------------------------------------
0.0.0.0 Router 180.0.0.2 180.0.0.2 1800 0x800000b6 0xf54
0.0.0.0 Router 180.0.0.5 180.0.0.5 1902 0x8000009d 0xcb7c
0.0.0.0 Router 180.0.0.8 180.0.0.8 1815 0x8000009a 0x529b
0.0.0.0 Router 180.0.0.9 180.0.0.9 1156 0x80000085 0xd00f
0.0.0.0 Router 180.0.0.10 180.0.0.10 533 0x8000009d 0x3f1f
0.0.0.0 Router 180.0.0.11 180.0.0.11 137 0x80000086 0xc58f
0.0.0.0 Router 180.0.0.12 180.0.0.12 918 0x8000009d 0x4cf3
0.0.0.0 Router 180.0.0.13 180.0.0.13 1401 0x800000a2 0x879c
0.0.0.0 Network 180.0.53.28 180.0.0.28 149 0x80000083 0xe5cd
0.0.0.0 Network 180.0.54.28 180.0.0.28 1259 0x80000083 0xdad7
0.0.0.0 Summary 180.0.0.15 180.0.0.10 378 0x80000084 0xeba1
0.0.0.0 Summary 180.0.0.15 180.0.0.12 73 0x80000084 0xdfab
0.0.0.0 Summary 180.0.0.18 180.0.0.10 1177 0x80000083 0xcfbb
0.0.0.1 Summary 180.100.25.4 180.0.0.12 208 0x80000091 0x3049
0.0.0.1 AS Summ 180.0.0.8 180.0.0.10 824 0x80000084 0x3d07
0.0.0.1 AS Summ 180.0.0.8 180.0.0.12 1183 0x80000095 0x4bdf
0.0.0.1 AS Summ 180.0.0.9 180.0.0.10 244 0x80000082 0x73cb
n/a AS Ext 7.1.0.0 180.0.0.23 1312 0x80000083 0x45e7
n/a AS Ext 7.2.0.0 180.0.0.23 997 0x80000082 0x45e6
n/a AS Ext 10.20.0.0 180.0.0.23 238 0x80000081 0x2d81
...
-------------------------------------------------------------------------------
No. of LSAs: 339
===============================================================================
A:ALA-A# show router ospf 1 database detail
===============================================================================
Rtr Base OSPFv2 Instance 1 Link State Database (type : All) (detail)
-------------------------------------------------------------------------------
Router LSA for Area 0.0.0.0
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Adv Router Id : 10.10.10.10
Link State Id : 10.10.10.10 (168430090)
LSA Type : Router
Sequence No : 0x80000002 Checksum : 0xd81
Age : 594 Length : 36
Options : E
Flags : None Link Count : 1
Link Type (1) : Stub Network
Network (1) : 192.168.0.0 Mask (1) : 255.255.255.0
No of TOS (1) : 0 Metric-0 (1) : 10
-------------------------------------------------------------------------------
AS Ext LSA for Network 180.0.0.14
-------------------------------------------------------------------------------
Area Id : N/A Adv Router Id : 180.0.0.10
Link State Id : 180.0.0.14 LSA Type : AS Ext
Sequence No : 0x80000083 Checksum : 0xa659
Age : 2033 Length : 36
Options : E
Network Mask : 255.255.255.255 Fwding Address : 180.1.6.15
Metric Type : Type 2 Metric-0 : 4
Ext Route Tag : 0
-------------------------------------------------------------------------------
A:ALA-A# show router ospf database filtered
===============================================================================
Rtr Base OSPFv2 Instance 0 Link State Database (filtered)
===============================================================================
Type Area Id Link State Id Adv Rtr Id Filter
Router 0.0.0.0 10.0.0.2 10.0.0.2
-------------------------------------------------------------------------------
Router 0.0.0.0 10.0.0.2 10.0.0.2
Summary 0.0.0.0 1.2.3.0 10.0.0.2
Summary 0.0.0.0 10.0.0.1 10.0.0.2 Export 0.0.0.1
AS Summ 0.0.0.0 10.0.0.1 10.0.0.2
Router 0.0.0.1 10.0.0.1 10.0.0.1
Router 0.0.0.1 10.0.0.2 10.0.0.2
Network 0.0.0.1 1.1.2.2 10.0.0.2
Summary 0.0.0.1 1.2.3.0 10.0.0.2 Import 0.0.0.1
Summary 0.0.0.1 1.2.4.0 10.0.0.2 Import 0.0.0.1
Summary 0.0.0.1 1.4.6.0 10.0.0.2 Import 0.0.0.1
Summary 0.0.0.1 1.5.6.0 10.0.0.2 Import 0.0.0.1
Summary 0.0.0.2 1.5.6.0 10.0.0.2
Summary 0.0.0.2 10.0.0.1 10.0.0.2 Export 0.0.0.1
Summary 0.0.0.2 10.0.6.0 10.0.0.2
-------------------------------------------------------------------------------
No. of LSAs: 14
No. of Export Filtered LSAs: 2
No. of Import Filtered LSAs: 4
===============================================================================
A:ALA-A#
*A:Dut-C>config>router>ospf3# show router ospf3 0 database detail adv-router 10.20.1.3
===============================================================================
Rtr Base OSPFv3 Instance 0 Link State Database (type: All) (detail)
===============================================================================
-------------------------------------------------------------------------------
Router LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.3
Link State Id : 0.0.0.0 (0)
LSA Type : Router
Sequence No : 0x80000002 Checksum : 0x8749
Age : 343 Length : 56
Options : ----R--EV6
Flags : ASBR Link Count : 2
Link Type (1) : P2P Link Nbr Rtr ID (1) : 10.20.1.1
I/F Index (1) : 2 Nbr I/F Index (1): 3
Metric (1) : 100
Link Type (2) : P2P Link Nbr Rtr ID (2) : 10.20.1.6
I/F Index (2) : 3 Nbr I/F Index (2): 4
Metric (2) : 100
-------------------------------------------------------------------------------
IA Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.3
Link State Id : 0.0.0.0 (0)
LSA Type : IA Pfx
Sequence No : 0x80000004 Checksum : 0x285a
Age : 303 Length : 192
Ref Ls Type : 2001 Ref Ls Id : 0
Ref Adv Rtr : 10.20.1.3 No of Pfxs : 8
Prefix (1) : 3ffe::a14:103/128
Pfx Options (1) : LA Metric (1) : 0
Prefix (2) : 3ffe::3300:d00/120
Pfx Options (2) : Metric (2) : 100
Prefix (3) : 3ffe::100:d00/120
Pfx Options (3) : Metric (3) : 100
Prefix (4) : 3ffe::3300:2400/120
Pfx Options (4) : Metric (4) : 100
Prefix (5) : 3ffe::100:2400/120
Pfx Options (5) : Metric (5) : 100
Prefix (6) : 3ffe::100:900/120
Pfx Options (6) : Metric (6) : 200
Prefix (7) : 3ffe::3300:2103/128
Pfx Options (7) : LA Metric (7) : 0
Prefix (8) : 3ffe::100:2103/128
Pfx Options (8) : LA Metric (8) : 0
-------------------------------------------------------------------------------
Rtr Inf LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.3
Link State Id : 0.0.0.0 (0)
LSA Type : Rtr Inf
Sequence No : 0x80000002 Checksum : 0x783a
Age : 343 Length : 68
TLV dump:
Capabilities (1) Len 4 :
0x28000000
SR algorithm (8) Len 2 :
0x2 0x0
SR label range (9) Len 12 :
Range-size=1000
Sub-TLV SID/label(7) len 3 :
label=40000
SR Readable label depth capability: 15
non-OSPF Func Capabilities (32768) Len 4 :
0x80000000
-------------------------------------------------------------------------------
E-Router LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.3
Link State Id : 0.0.0.0 (0)
LSA Type : E-Router
Sequence No : 0x80000004 Checksum : 0x44a8
Age : 303 Length : 88
Options : ----R--EV6
Flags : ASBR Link Count : 2
Link Type (1) : P2P Link Nbr Rtr ID (1) : 10.20.1.1
I/F Index (1) : 2 Nbr I/F Index (1): 3
Metric (1) : 100
Adj SID (1) : 524287 Flags (1) : BVL--
Weight (1) : 0
Link Type (2) : P2P Link Nbr Rtr ID (2) : 10.20.1.6
I/F Index (2) : 3 Nbr I/F Index (2): 4
Metric (2) : 100
Adj SID (2) : 524286 Flags (2) : BVL--
Weight (2) : 0
-------------------------------------------------------------------------------
E-IA Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.3
Link State Id : 0.0.0.0 (0)
LSA Type : E-IA Pfx
Sequence No : 0x80000004 Checksum : 0xb319
Age : 304 Length : 140
Ref Ls Type : a021 Ref Ls Id : 0
Ref Adv Rtr : 10.20.1.3 No of Pfxs : 3
Prefix (1) : 3ffe::a14:103/128
Pfx Options (1) : N LA Metric (1) : 0
Prefix SID (1) : 6 Flags (1) : NP-----
Algorithm (1) : 0
Prefix (2) : 3ffe::3300:2103/128
Pfx Options (2) : N LA Metric (2) : 0
Prefix (3) : 3ffe::100:2103/128
Pfx Options (3) : N LA Metric (3) : 0
Prefix SID (3) : 0 Flags (3) : NP-----
Algorithm (3) : 0
-------------------------------------------------------------------------------
AS Ext LSA (0.0.0.2 (2))
-------------------------------------------------------------------------------
Area Id : N/A Adv Router Id : 10.20.1.3
Link State Id : 0.0.0.2 (2)
LSA Type : AS Ext
Sequence No : 0x80000001 Checksum : 0x4775
Age : 348 Length : 44
Options : E
Pfx Options : E2-Metric : 1
Dest Prefix : 3ffe::6700:1/128
===============================================================================
*A:Dut-C>config>router>ospf3# show router ospf3 0 database detail adv-router 10.20.1.6
===============================================================================
Rtr Base OSPFv3 Instance 0 Link State Database (type: All) (detail)
===============================================================================
-------------------------------------------------------------------------------
Router LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.0 (0)
LSA Type : Router
Sequence No : 0x80000002 Checksum : 0x2aa3
Age : 328 Length : 56
Options : ----R--EV6
Flags : ABR ASBR Link Count : 2
Link Type (1) : P2P Link Nbr Rtr ID (1) : 10.20.1.2
I/F Index (1) : 2 Nbr I/F Index (1): 4
Metric (1) : 100
Link Type (2) : P2P Link Nbr Rtr ID (2) : 10.20.1.3
I/F Index (2) : 4 Nbr I/F Index (2): 3
Metric (2) : 100
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.1 (1)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0x45df
Age : 335 Length : 44
Pfx Options : Metric : 0
Dest Prefix : 3ffe::a14:106/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.3 (3)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0xb9b
Age : 328 Length : 44
Pfx Options : Metric : 100
Dest Prefix : 3ffe::100:3705/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.4 (4)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0x83ef
Age : 328 Length : 44
Pfx Options : Metric : 100
Dest Prefix : 3ffe::3300:3705/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.5 (5)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0x5d60
Age : 328 Length : 44
Pfx Options : Metric : 100
Dest Prefix : 3ffe::a14:105/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.6 (6)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0x1932
Age : 328 Length : 44
Pfx Options : Metric : 200
Dest Prefix : 3ffe::100:2c04/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.8 (8)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0x878f
Age : 328 Length : 44
Pfx Options : Metric : 200
Dest Prefix : 3ffe::3300:2c04/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.9 (9)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0x75e0
Age : 328 Length : 44
Pfx Options : Metric : 200
Dest Prefix : 3ffe::a14:104/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.10 (10)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0xdcde
Age : 328 Length : 44
Pfx Options : Metric : 100
Dest Prefix : 3ffe::a14:102/128
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.12 (12)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0xc86a
Age : 328 Length : 44
Pfx Options : Metric : 200
Dest Prefix : 3ffe::3300:1800/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.13 (13)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0x3c28
Age : 328 Length : 44
Pfx Options : Metric : 200
Dest Prefix : 3ffe::100:1800/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.14 (14)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0x8c07
Age : 328 Length : 44
Pfx Options : Metric : 100
Dest Prefix : 3ffe::3300:1a00/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.15 (15)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0xffc4
Age : 328 Length : 44
Pfx Options : Metric : 100
Dest Prefix : 3ffe::100:1a00/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.16 (16)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0xaf6a
Age : 328 Length : 44
Pfx Options : Metric : 200
Dest Prefix : 3ffe::3300:2d00/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.17 (17)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0x2328
Age : 328 Length : 44
Pfx Options : Metric : 200
Dest Prefix : 3ffe::100:2d00/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.18 (18)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0x551c
Age : 328 Length : 44
Pfx Options : Metric : 100
Dest Prefix : 3ffe::3300:3800/120
-------------------------------------------------------------------------------
IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.19 (19)
LSA Type : IE Pfx
Sequence No : 0x80000001 Checksum : 0xc8d9
Age : 328 Length : 44
Pfx Options : Metric : 100
Dest Prefix : 3ffe::100:3800/120
-------------------------------------------------------------------------------
IE Rtr LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 10.20.1.2 (169083138)
LSA Type : IE Rtr
Sequence No : 0x80000001 Checksum : 0xcf8b
Age : 328 Length : 32
Options : ----R--EV6 Metric : 100
ASB Rtr Id : 10.20.1.2
-------------------------------------------------------------------------------
IE Rtr LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 10.20.1.4 (169083140)
LSA Type : IE Rtr
Sequence No : 0x80000001 Checksum : 0xc32f
Age : 328 Length : 32
Options : ----R--EV6 Metric : 200
ASB Rtr Id : 10.20.1.4
-------------------------------------------------------------------------------
IE Rtr LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 10.20.1.5 (169083141)
LSA Type : IE Rtr
Sequence No : 0x80000001 Checksum : 0xdb79
Age : 328 Length : 32
Options : ----R--EV6 Metric : 100
ASB Rtr Id : 10.20.1.5
-------------------------------------------------------------------------------
IA Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.0 (0)
LSA Type : IA Pfx
Sequence No : 0x80000003 Checksum : 0xb8c1
Age : 293 Length : 112
Ref Ls Type : 2001 Ref Ls Id : 0
Ref Adv Rtr : 10.20.1.6 No of Pfxs : 4
Prefix (1) : 3ffe::3300:2400/120
Pfx Options (1) : Metric (1) : 100
Prefix (2) : 3ffe::100:2400/120
Pfx Options (2) : Metric (2) : 100
Prefix (3) : 3ffe::3300:4206/128
Pfx Options (3) : LA Metric (3) : 0
Prefix (4) : 3ffe::100:4206/128
Pfx Options (4) : LA Metric (4) : 0
-------------------------------------------------------------------------------
Rtr Inf LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.0 (0)
LSA Type : Rtr Inf
Sequence No : 0x80000002 Checksum : 0x4abf
Age : 329 Length : 68
TLV dump:
Capabilities (1) Len 4 :
0x28000000
SR algorithm (8) Len 2 :
0x2 0x0
SR label range (9) Len 12 :
Range-size=1000
Sub-TLV SID/label(7) len 3 :
label=70000
SR Readable label depth capability: 15
non-OSPF Func Capabilities (32768) Len 4 :
0x80000000
-------------------------------------------------------------------------------
E-Router LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.0 (0)
LSA Type : E-Router
Sequence No : 0x80000003 Checksum : 0xdf0f
Age : 293 Length : 88
Options : ----R--EV6
Flags : ABR ASBR Link Count : 2
Link Type (1) : P2P Link Nbr Rtr ID (1) : 10.20.1.2
I/F Index (1) : 2 Nbr I/F Index (1): 4
Metric (1) : 100
Adj SID (1) : 524285 Flags (1) : BVL--
Weight (1) : 0
Link Type (2) : P2P Link Nbr Rtr ID (2) : 10.20.1.3
I/F Index (2) : 4 Nbr I/F Index (2): 3
Metric (2) : 100
Adj SID (2) : 524284 Flags (2) : BVL--
Weight (2) : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.2 (2)
LSA Type : E-IE Pfx
Sequence No : 0x80000001 Checksum : 0xf5de
Age : 334 Length : 60
Pfx Options : N LA Metric : 0
Dest Prefix : 3ffe::a14:106/128
Prefix SID : 9 Flags : NP-----
Algorithm : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.7 (7)
LSA Type : E-IE Pfx
Sequence No : 0x80000001 Checksum : 0xb351
Age : 328 Length : 60
Pfx Options : N Metric : 200
Dest Prefix : 3ffe::100:2c04/128
Prefix SID : 1 Flags : NP-----
Algorithm : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.11 (11)
LSA Type : E-IE Pfx
Sequence No : 0x80000001 Checksum : 0x4b20
Age : 328 Length : 60
Pfx Options : N Metric : 100
Dest Prefix : 3ffe::a14:102/128
Prefix SID : 11 Flags : NP-----
Algorithm : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.20 (20)
LSA Type : E-IE Pfx
Sequence No : 0x80000001 Checksum : 0xcd81
Age : 328 Length : 60
Pfx Options : N Metric : 100
Dest Prefix : 3ffe::100:3705/128
Prefix SID : 2 Flags : NP-----
Algorithm : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.21 (21)
LSA Type : E-IE Pfx
Sequence No : 0x80000001 Checksum : 0xc29e
Age : 328 Length : 60
Pfx Options : N Metric : 100
Dest Prefix : 3ffe::a14:105/128
Prefix SID : 8 Flags : NP-----
Algorithm : 0
-------------------------------------------------------------------------------
E-IE Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.22 (22)
LSA Type : E-IE Pfx
Sequence No : 0x80000001 Checksum : 0x5ca1
Age : 328 Length : 60
Pfx Options : N Metric : 200
Dest Prefix : 3ffe::a14:104/128
Prefix SID : 7 Flags : NP-----
Algorithm : 0
-------------------------------------------------------------------------------
E-IA Pfx LSA for Area 0.0.0.1
-------------------------------------------------------------------------------
Area Id : 0.0.0.1 Adv Router Id : 10.20.1.6
Link State Id : 0.0.0.0 (0)
LSA Type : E-IA Pfx
Sequence No : 0x80000002 Checksum : 0x54d0
Age : 293 Length : 100
Ref Ls Type : a021 Ref Ls Id : 0
Ref Adv Rtr : 10.20.1.6 No of Pfxs : 2
Prefix (1) : 3ffe::3300:4206/128
Pfx Options (1) : N LA Metric (1) : 0
Prefix (2) : 3ffe::100:4206/128
Pfx Options (2) : N LA Metric (2) : 0
Prefix SID (2) : 3 Flags (2) : NP-----
Algorithm (2) : 0
===============================================================================
database
Syntax
database [purge]
Context
[Tree] (clear>router>ospf3 database)
[Tree] (clear>router>ospf database)
Full Context
clear router ospf3 database
clear router ospf database
Description
This command clears all LSAs received from other nodes, sets all adjacencies other than two-way to one-way, and refreshes all self-originated LSAs.
Parameters
- purge
-
Clears all self-originated LSAs and re-originates all self-originated LSAs.
Platforms
All
database
Syntax
database [peer ipv6-address] [ detail]
database [peer ipv6-address] detail [qos]
database ipv6-address[/prefix-length] [longer] [peer ipv6-address] [detail]
database ipv6-address[/prefix-length] [ longer] [peer ipv6-address] detail [qos]
Context
[Tree] (show>router>ripng database)
Full Context
show router ripng database
Description
This command displays the routes in the RIPng database.
Parameters
- ipv6-address
-
Specifies the RIPng IPv6 address.
- prefix-length
-
The IP prefix in dotted decimal notation for the range used by the ABR to advertise that summarizes the area into another area.
- detail
-
Displays detailed information.
- qos
-
Displays QoS information.
- longer
-
Displays more detailed information.
Platforms
All
Output
The following are examples of router RIPng database information.
Sample Output*A:Dut-C>config>router>if# show router ripng database
=============================================================================
RIP-NG Route Database
=============================================================================
Destination Interface
Peer Metric TTL Valid
-----------------------------------------------------------------------------
3ffe::10:10:3:0/120 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:3:0/120 two
fe80::6629:ffff:fe00:0 1 3 Yes
3ffe::10:10:3:0/120 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:3:0/120 four
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:12:0/120 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:12:0/120 two
fe80::6629:ffff:fe00:0 1 3 Yes
3ffe::10:10:12:0/120 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:12:0/120 four
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:103:0/120 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:103:0/120 two
fe80::6629:ffff:fe00:0 1 3 Yes
3ffe::10:10:103:0/120 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:103:0/120 four
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:112:0/120 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:112:0/120 two
fe80::6629:ffff:fe00:0 1 3 Yes
3ffe::10:10:112:0/120 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:112:0/120 four
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:20:1:2/128 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:20:1:2/128 two
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:20:1:2/128 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:20:1:2/128 four
fe80::6629:ffff:fe00:0 1 3 Yes
-----------------------------------------------------------------------------
No. of Routes: 20
=============================================================================
show router ripng database [peer <ipv6-address>]
*A:Dut-C>config>router>if# show router ripng database peer fe80::6629:ffff:fe00:0
=============================================================================
RIP-NG Route Database
=============================================================================
Destination Interface
Peer Metric TTL Valid
-----------------------------------------------------------------------------
3ffe::10:10:3:0/120 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:3:0/120 two
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:3:0/120 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:3:0/120 four
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:12:0/120 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:12:0/120 two
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:12:0/120 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:12:0/120 four
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:103:0/120 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:103:0/120 two
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:103:0/120 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:103:0/120 four
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:112:0/120 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:112:0/120 two
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:112:0/120 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:10:112:0/120 four
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:20:1:2/128 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:20:1:2/128 two
fe80::6629:ffff:fe00:0 1 3 Yes
3ffe::10:20:1:2/128 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:20:1:2/128 four
fe80::6629:ffff:fe00:0 1 4 Yes
-----------------------------------------------------------------------------
No. of Routes: 20
=============================================================================
show router ripng database [peer <ipv6-address>] detail
*A:DutC>config>router>if# show router ripng database peer fe80::6629:ffff:fe00:0 detail
===============================================================================
RIP-NG Route Database (Detail)
===============================================================================
Destination : 3ffe::10:10:3:0/120 Metric : 1
Interface : one TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:3:0/120 Metric : 1
Interface : two TTL : 3
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:3:0/120 Metric : 1
Interface : three TTL : 3
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:3:0/120 Metric : 1
Interface : four TTL : 3
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:12:0/120 Metric : 1
Interface : one TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:12:0/120 Metric : 1
Interface : two TTL : 3
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:12:0/120 Metric : 1
Interface : three TTL : 3
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:12:0/120 Metric : 1
Interface : four TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:103:0/120 Metric : 1
Interface : one TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:103:0/120 Metric : 1
Interface : two TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:103:0/120 Metric : 1
Interface : three TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:103:0/120 Metric : 1
Interface : four TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:112:0/120 Metric : 1
Interface : one TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:112:0/120 Metric : 1
Interface : two TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:112:0/120 Metric : 1
Interface : three TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:10:112:0/120 Metric : 1
Interface : four TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:20:1:2/128 Metric : 1
Interface : one TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:20:1:2/128 Metric : 1
Interface : two TTL : 3
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:20:1:2/128 Metric : 1
Interface : three TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
Destination : 3ffe::10:20:1:2/128 Metric : 1
Interface : four TTL : 4
Next Hop : :: Tag : 0
Peer : fe80::6629:ffff:fe00:0 Valid : Yes
===============================================================================
show router ripng database <ipv6-address[/prefix-length]>
*A:Dut-C>config>router>if# show router ripng database 3ffe::10:20:1:2/128
=============================================================================
RIP-NG Route Database
=============================================================================
Destination Interface
Peer Metric TTL Valid
-----------------------------------------------------------------------------
3ffe::10:20:1:2/128 one
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:20:1:2/128 two
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:20:1:2/128 three
fe80::6629:ffff:fe00:0 1 4 Yes
3ffe::10:20:1:2/128 four
fe80::6629:ffff:fe00:0 1 3 Yes
-----------------------------------------------------------------------------
No. of Routes: 4
=============================================================================
database
Syntax
database
Context
[Tree] (clear>router>ripng database)
Full Context
clear router ripng database
Description
This command flushes all routes in the RIPng database.
Platforms
All
database
Syntax
database [bsl [256..1024]] subdomain-id [ 0..255]
Context
[Tree] (clear>router>bier database)
Full Context
clear router bier database
Description
This command clears the BIER database.
Platforms
All
database
Syntax
database [system-id]
Context
[Tree] (clear>service>id>spb database)
Full Context
clear service id spb database
Description
This command clears and resets the Shortest Path Bridging (SPB)database.
Parameters
- system-id
-
Specifies the system ID. When the system ID is entered, only the specified entries are removed from the IS-IS adjacency database.
Platforms
All
datapath
datapath
Syntax
datapath port-id [mac mac-chip-number] [fp fp-number] [detail]
Context
[Tree] (show datapath)
Full Context
show datapath
Description
This command displays the datapath mapping for the specified card, MDA, FP, MAC, connector, and port combinations. Fully qualified port identifiers are displayed for ports when the detail or port parameters are specified.
This command is supported on FP4-based hardware only.
Parameters
- port-id
-
Specifies the port ID.
- slot
-
Specifies the slot number of the card in the chassis to display. The maximum slot number is platform dependent. See the Installation Guides for more information.
- mda
-
Specifies the MDA number in the slot to display. This is an integer value relative to the card.
- xiom
-
Specifies the XIOM number in the slot to display.
- connector
-
Specifies the connector number to display. This is an integer value relative to the MDA.
- port
-
Specifies the connector port number to display. The full port identifier is displayed. This is an integer value relative to the connector.
- fp-number
-
Specifies the FP number to display. This is an integer value relative to the card.
- mac-chip-number
-
Specifies the MAC number to display. This is an integer value relative to the MDA.
- detail
-
Displays the full port identifiers for all ports with configured connectors.
Platforms
All
Output
The following output is an example of the show datapath command.
Sample Output:*A:PE# show datapath 1/2/c1/1
===============================================================================
Card MDA FP MAC Chip Num Connector Ports
-------------------------------------------------------------------------------
1 2 1 1 c1 1/2/c1/1
===============================================================================
*A:PE# show datapath 1/2 fp 1
===============================================================================
Card MDA FP MAC Chip Num Connector Ports
-------------------------------------------------------------------------------
1 2 1 1 c1
1 2 1 1 c2
1 2 1 1 c3
1 2 1 1 c4
1 2 1 1 c5
1 2 1 1 c6
===============================================================================
*A:PE# show datapath 1/2 mac 1 detail
===============================================================================
Card MDA FP MAC Chip Num Connector Ports
-------------------------------------------------------------------------------
1 2 1 1 c1 1/2/c1/1
1 2 1 1 c2 1/2/c2/1
1 2 1 1 c3 1/2/c3/1
1 2 1 1 c4 1/2/c4/1
1 2 1 1 c5 1/2/c5/1
1 2 1 1 c6 1/2/c6/1
===============================================================================
*A:PE#
A:Dut-F# show datapath 1
===============================================================================
Card [XIOM/]MDA FP MAC Chip Num Connector Port
-------------------------------------------------------------------------------
1 x1/1 1 1 c1
1 x1/1 1 1 c2
1 x1/1 1 1 c3
1 x1/1 1 1 c4
1 x1/1 1 1 c5
1 x1/1 1 1 c6
1 x1/1 1 2 c7
1 x1/1 1 2 c8
1 x1/1 1 2 c9
1 x1/1 1 2 c10
1 x1/1 1 2 c11
datastore-locks
datastore-locks
Syntax
datastore-locks [detail]
Context
[Tree] (show>system>management-interface datastore-locks)
Full Context
show system management-interface datastore-locks
Description
This command displays datastore locks information.
Parameters
- detail
-
Displays session-specific information.
Platforms
All
Output
The following is an example of detail datastore locks information for all datastores. Datastore-locks Output Fields describes the output fields.
Sample Output[]
A:admin@node-1# show system management-interface datastore-locks detail
===============================================================================
Session ID Region Datastore Lock State
Username Session Mode Idle Time
Session Type From
-------------------------------------------------------------------------------
6 configure Candidate Unlocked
admin Global 0d 00:00:09
MD-CLI (1) Console
-------------------------------------------------------------------------------
Number of sessions: 1
'#' indicates the current active session
'(n)' indicates the number of internal sessions
===============================================================================
|
Label |
Description |
|---|---|
|
Session ID |
The session ID. |
|
Region |
The region or scope that the datastore belongs to. |
|
Datastore |
Datastores that can be locked. For example: Running and Candidate. |
|
Lock State |
Locked — Indicates the session is in a locked state. Unlocked — Indicates the session is in an unlocked state. |
|
Username |
The name of the user. |
|
Session Mode |
Global — A shared session. Exclusive — An exclusive session. |
|
Idle Time |
The idle time of the session. |
|
Session Type |
NETCONF — Indicates a NETCONF session is running. MD-CLI — Indicates an MD-CLI session is running. gRPC — Indicates a gRPC session is running. SNMP — Indicates an SNMP session is running. Classic CLI — Indicates a classic CLI session is running. System — Indicates a system (EHS or CRON) session is running. |
|
From |
The originating IP address. |
debounce
debounce
Syntax
debounce peer ip-address ring sync-tag
Context
[Tree] (clear>redundancy>multi-chassis>mcr debounce)
Full Context
clear redundancy multi-chassis mc-ring debounce
Description
This command clears multi-chassis ring operational state debounce history.
Parameters
- ip-address
-
Clears debounce history for the specified IP address.
- sync-tag
-
Clears debounce history for the specified sync tag.
Platforms
All
debug
debug
Syntax
debug [application]
Context
[Tree] (show debug)
Full Context
show debug
Description
This command displays set debug points.
This command is not available in the MD-CLI. Use the MD-CLI admin show configuration debug command or the info command in the debug configuration region.
Parameters
- application
-
Display which debug points have been set.
Platforms
All
Output
The following shows an example of debug output.
Sample Output*A:EsrC# show debug
debug
mirror-source 100
subscriber "user1" ingress
subscriber "user2" fc be h2 h1 nc egress
subscriber "user3" ingress egress
subscriber "user4" sap 1/1/2:1 fc af ef nc ingress
subscriber "user5" sap 1/1/2:1 egress
subscriber "user6" sap 1/1/2:1 fc be l2 af h2 ef nc ingress egress
subscriber "user7" sap 1/1/2:1 ip 1.1.0.7 fc l1 h2 ingress
subscriber "user8" sap 1/1/2:1 ip 1.1.0.8 fc af l1 h2 ef nc egress
subscriber "user9" sap 1/1/2:1 ip 1.1.0.9 ingress egress
subscriber "user10" sap 1/1/
2:1 mac 00:00:01:00:00:01 fc be l2 l1 h1 nc ingress
subscriber "user11" sap 1/1/
2:1 mac 00:00:01:00:00:02 fc be l1 h2 ef h1 egress
subscriber "user12" sap 1/1/
2:1 mac 00:00:01:00:00:03 fc be ef ingress egress
subscriber "user13" sap 1/1/
2:1 ip 1.1.0.13 mac 00:00:01:00:00:01 fc be ef h1 ingress
subscriber "user14" sap 1/1/2:1 ip 1.1.0.14 mac 00:00:01:00:00:02 egress
subscriber "user15" sap 1/1/
2:1 ip 1.1.0.15 mac 00:00:01:00:00:03 fc af l1 ef nc ingress egress
subscriber "user16" sla-profile "sla1" ingress
subscriber "user17" sla-profile "sla2" egress
subscriber "user18" sla-profile "sla3" fc be af h2 ingress egress
no shutdown
exit
exit
*A:EsrC#
*A:alu1# show debug
debug
mirror-source 101
port 1/1/1 ingress
no shutdown
exit
mirror-source 102
port 1/1/3 egress
no shutdown
exit
exit
*A:alu1#
debug
Syntax
debug
Context
[Tree] (tools>dump debug)
Full Context
tools dump debug
Description
Commands in this context dump debug information.
Platforms
All
debug-packet
debug-packet
Syntax
debug-packet [clear]
Context
[Tree] (tools>dump>eth-cfm debug-packet)
Full Context
tools dump eth-cfm debug-packet
Description
This command displays and optionally clears the counters representing the number of CFM PDUs that matched the debug criteria but were not passed to the debug logger. This situation is caused by a full message queue.
Parameters
- clear
-
Clears the current counters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of CFM-PDU information.
Sample Outputtools dump eth-cfm debug-packet
================================================================================
ETH-CFM Debug Logging Message Queue Statistics
================================================================================
Rx Debug Exceptions : 0
Tx Debug Exceptions : 0
================================================================================
declined-addresses
declined-addresses
Syntax
declined-addresses ip-address[/mask] [detail]
declined-addresses pool pool-name
Context
[Tree] (show>router>dhcp>server declined-addresses)
Full Context
show router dhcp local-dhcp-server declined-addresses
Description
This command display information about declined addresses.
Parameters
- pool-name
-
Specifies a DHCP pool name on the router.
- ip-address
-
Specifies the IP address of the DNS server. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
- detail
-
Displays detailed information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of declined address information
Sample Output*A:ALA-48>show>router>dhcp>server# declined-addresses pool test
===============================================================================
Declined addresses for server test Base
===============================================================================
Pool Subnet IP Address
PPPoe User Name Time MAC Address Type
Option 82 Circuit ID
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
*A:ALA-48>show>router>dhcp>server#
Declined Address Pool Field Descriptions describes declined address pool output fields.
|
Field |
Description |
|---|---|
|
Pool |
The name of the IP address pool |
|
Subnet |
The subnet address |
|
IP Address |
The declined IP address |
|
Time |
The creation time of this entry |
|
MAC Address |
The declined MAC address |
|
Type |
The type of declined address |
|
PPPoE User Name |
The name of the PPPoE user name |
|
Option 82 Circuit ID |
The declined circuit ID from the Option 82 |
declined-addresses
Syntax
declined-addresses ip-address[/mask]
declined-addresses pool pool-name
Context
[Tree] (clear>router>dhcp>server declined-addresses)
Full Context
clear router dhcp local-dhcp-server declined-addresses
Description
This command clears declined DHCP addresses.
Parameters
- pool-name
-
Clears information about the declined pool name.
- ip-address[/mask]
-
Clears information about the declined IP address and mask.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
default-domain
default-domain
Syntax
default-domain [bridge-identifier bridge-id] [vlan vlan-id] [system-settings]
Context
[Tree] (show>eth-cfm default-domain)
Full Context
show eth-cfm default-domain
Description
This command displays per-MIP index (bridge-identifier and vlan) configuration as entered under the default-domain entries.
Parameters
- bridge-id
-
The bridge identifier related to the MIP. This is equivalent to the service-id.
- vlan-id
-
The VLAN ID matching the primary VLAN, or "none” if primary-vlan-enable is not configured.
- system-settings
-
Specifies the system settings.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following is an example of default domain information.
ETH-CFM Default Domain Field Descriptions describes the show default domain command output fields.
Sample Outputshow eth-cfm default-domain
===============================================================================
Default Domain Information
===============================================================================
System Settings
MHF Creation : none Level : 0
Id Permission : none MIP Ltr Priority : 7
===============================================================================
BridgeName:BridgeId VLAN Level Creation IdPerm LtrPr
-------------------------------------------------------------------------------
7:7 none defer defer defer defer
string-100:1000000 10 4 default chassis 7
string-100:1000000 20 5 default defer defer
west-toronto-corridoor-circuit-[1234567.74.001.11111]:1000001
none 3 explicit defer defer
west-toronto-corridoor-circuit-[1234567.74.001.11111]:1000001
600 defer defer defer defer
west-toronto-corridoor-circuit-[1234567.74.001.11111]:1000001
601 defer defer defer defer
===============================================================================
|
Label |
Description |
|---|---|
|
BridgeName:BridgeID |
The name and ID of the association service BridgeName:BridgeID combinations that exceed the allowed column length causes the associated output to be produced on a separate line. |
|
VLAN |
The numerical value of the primary VLAN associated with the MIP, or the value none |
|
Level |
The configured level value, or defer to the value specified under the system settings for the MIP |
|
Creation |
The configured MHF creation mode, or defer to the value specified under the system settings for the MIP |
|
IdPerm |
The configured identifier that is carried in supporting ETH-CFM PDUs, or defer to the value specified under the system settings |
|
LtrPr |
The configured MIP LTR priority, or defer to the value specified under the system settings for the MIP |
delay-template
delay-template
Syntax
delay-template template-name
Context
[Tree] (show>oam-pm>streaming delay-template)
Full Context
show oam-pm streaming delay-template
Description
This command displays the configuration data for one or all OAM performance monitoring delay templates.
Parameters
- template-name
-
Displays the results for a specific delay template, up to 64 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following is an example of OAM-PM streaming delay-template summary information. Show delay-template Output Fields describes the delay template fields.
Sample Outputshow oam-pm streaming delay-template
-------------------------------------------------------------------------------
Streaming Delay Templates
-------------------------------------------------------------------------------
Name Admin Tests
-------------------------------------------------------------------------------
stream-1 Up 7
-------------------------------------------------------------------------------
No. of Streaming Delay Templates: 1
-------------------------------------------------------------------------------
show oam-pm streaming delay-template "stream-1"
-------------------------------------------------------------------------------
Tmpl Name : stream-1
Description : stream delay stats base 1
-------------------------------------------------------------------------------
Admin State : Up
FD Average : round-trip
IFDV Average : round-trip
Sample Window : 10 seconds
Window Integrity : 80%
Active Test Refs : 6
Total Test Refs : 7
-------------------------------------------------------------------------------
|
Label |
Description |
|---|---|
|
Name |
Name of the delay template |
|
Admin |
State of the delay template |
|
Tests |
Number of tests referencing the delay template |
|
Tmpl Name |
Name of the delay template |
|
Description |
Description of the delay template (truncated beyond width) |
|
Admin State |
Up — The delay template is administratively enabled Down — The delay template is administratively disabled |
|
FD Average |
forward — The average frame delay metric for forward direction backward — The average frame delay metric for backward direction round-trip — The average frame delay metric for round-trip direction |
|
IFDV Average |
forward — The average inter-frame delay variation metric for forward direction backward — The average inter-frame delay variation metric for backward direction round-trip — The average inter-frame delay variation metric for round-trip direction |
|
Sample Window |
Length of the sample window |
|
Window Integrity |
Percentage required to ensure integrity of the reporting |
|
Active Test Refs |
Number of tests actively referencing the delay template |
|
Total Test Refs |
Number of total tests referencing the delay template |
delay-template-using
delay-template-using
Syntax
delay-template-using [delay-template template-name]
Context
[Tree] (show>oam-pm>streaming delay-template-using)
Full Context
show oam-pm streaming delay-template-using
Description
This command displays the list of sessions configured against one or all OAM performance monitoring delay templates.
Parameters
- template-name
-
Displays the results for a specific delay template up to 64 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following is an example of OAM-PM streaming delay-template-using summary information.
Sample Outputshow oam-pm streaming delay-template-using
=========================================================================
OAM Performance Monitoring Tests Per Delay Template
=========================================================================
Template Name Admin
Session Name Test Type State
-------------------------------------------------------------------------
stream-1 Up
eth-circuit-service-epipe1 DMM Inact
ip-lpb111-SR-TE-LSP TWL Act
ip-circuit-service-vprn2 TWL Act
ip-rtr-telemetry-streaming TWL Act
mpls-dm-rsvp-PE-2-PE-1 DM Act
mpls-dm-static-PE-2-PE-1 DM Act
mpls-dm-rsvp-PE-2-PE-1-hop1 DM Act
-------------------------------------------------------------------------
=========================================================================
show oam-pm streaming delay-template-using delay-template "stream-1"
=========================================================================
OAM Performance Monitoring Tests Per Delay Template
=========================================================================
Template Name Admin
Session Name Test Type State
-------------------------------------------------------------------------
stream-1 Up
eth-circuit-service-epipe1 DMM Inact
ip-lpb111-SR-TE-LSP TWL Act
ip-circuit-service-vprn2 TWL Act
ip-rtr-telemetry-streaming TWL Act
mpls-dm-rsvp-PE-2-PE-1 DM Act
mpls-dm-static-PE-2-PE-1 DM Act
mpls-dm-rsvp-PE-2-PE-1-hop1 DM Act
=========================================================================
dest-tracking
dest-tracking
Syntax
dest-tracking ip [detail]
dest-tracking ipv6 [detail]
dest-tracking sap [detail]
dest-tracking sdp [detail]
Context
[Tree] (tools>dump>filter>resources dest-tracking)
Full Context
tools dump filter resources dest-tracking
Description
This command displays information about resources pertaining to tracked targets.
Parameters
- ip
-
Displays information about IPv4 targets.
- ipv6
-
Displays information about IPv6 targets.
- sap
-
Displays information about SAP targets.
- sdp
-
Displays information about SDP targets.
- detail
-
Displays detailed information.
Platforms
All
Output
The following output is an example of filter resource SAP destination tracking information.
Sample Outputdest-tracking sap
===============================================================================
Unique SAPs with tracked forwarding states ====================================
Used : 1
Free : 4095
Total : 4096
===============================================================================
The following output is an example of filter resource SAP destination tracking detailed information.
dest-tracking# sap detail
===============================================================================
Unique SAPs with tracked forwarding states ====================================
Num Destination Ref. count
-------------------------------------------------------------------------------
1 sap 1/2/2 1
===============================================================================
Unique SAPs with tracked forwarding states ====================================
Used : 1
Free : 4095
Total : 4096
===============================================================================
detail
detail
Syntax
detail [session ip-addr [label-space]] [ family]
Context
[Tree] (show>router>ldp>bindings>active detail)
Full Context
show router ldp bindings active detail
Description
This command displays details of LDP bindings.
Parameters
- family
-
Displays either IPv4 or IPv6 LDP information.
- session ip-addr[label-space]
-
Specifies the IP address and label space identifier.
Platforms
All
detail
Syntax
detail
Context
[Tree] (show>router>pcep>pcc detail)
Full Context
show router pcep pcc detail
Description
This command displays PCEP detail information.
Platforms
All
Output
PCEP Detail Output
PCEP Detail Output Fields describes PCEP detail and status output fields.
Sample Output*A:Dut-C>config>router>mpls# show router pcep pcc detail
===============================================================================
Path Computation Element Protocol (PCEP) Path Computation Client (PCC) Info
===============================================================================
Admin Status : Up Oper Status : Up
Unknown Msg Limit : 10 msg/min
Keepalive Interval : 30 seconds DeadTimer Interval : 120 seconds
Capabilities List : stateful-delegate stateful-pce segment-rt-path rsvp-
path pce-initiated-lsp
Address : 10.20.1.3
Report Path Constraints: True
Redelegation Interval : 90 seconds
State Interval : 180 seconds State Timer Action : remove
Max SR-TE PCE Init Lsps: 8191
Open Wait Timer : 60 seconds Keep Wait Timer : 60 seconds
Sync Timer : 60 seconds Request Timer : 120 seconds
Connection Timer : 60 seconds Allow Negotiations : False
Max Sessions : 1 Max Unknown Req : 1000
===============================================================================
|
Label |
Description |
|---|---|
|
Admin Status |
Down — PCEP is administratively disabled. Up — PCEP is administratively enabled. |
|
Oper Status |
Down — PCEP is operationally down. Up — PCEP is operationally up. |
|
Unknown Msg Limit |
Specifies the unknown messages, per minute, limit. |
|
Keepalive Interval |
Specifies the keepalive interval. |
|
DeadTimer Interval |
Specifies the number of matching entries. |
|
Capabilities List |
Specifies the capabilities listing. |
|
Address |
Specifies the IP address. |
|
Report Path Constraints |
True — Path constrains will be reported. False — Path constrains will not be reported. |
|
Redelegation Interval |
Specifies the redelegation timer interval. |
|
State Interval |
Specifies the state timer interval. |
|
State Timer Action |
Remove — Specifies the state timer action is remove. None — Specifies the state timer action is none. |
|
Max SR-TE PCE Init Lsps |
Specifies the maximum number of PCE initiated SR-TE LSPs that can be created by the router. |
|
Open Wait Timer |
Specifies the open wait timer value. |
|
Keep Wait Timer |
Specifies the keep wait timer value. |
|
Sync Timer |
Specifies the sync timer value. |
|
Request Timer |
Specifies the request timer value. |
|
Connection Timer |
Specifies the connection timer value. |
|
Allow Negotiations |
True — Allow negotiations will occur. False — Allow negotiations will not occur. |
|
Max Sessions |
Specifies the maximum sessions value. |
|
Max Unknown Req |
Specifies the maximum unknown requests value. |
detail
Syntax
detail [partition]
Context
[Tree] (show>app-assure>group>http-enrich detail)
Full Context
show application-assurance group http-enrich detail
Description
This command displays detailed HTTP Enrichment information.
Parameters
- partition
-
Specifies the partition within the group.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
detail
Syntax
detail
Context
[Tree] (show>router>bgp>routes detail)
Full Context
show router bgp routes detail
Description
This command displays detailed information about the BGP routes, including information about the original path attribute values.
detail is a parameter of the show router bgp routes command. Depending on the parameters that are used to issue the command, the output can display a narrower or wider set of routes, including routes belonging to other address families. See the show router bgp routes command description for syntax variants, parameter descriptions and values, and output examples.
Platforms
All
detected-protocols
detected-protocols
Syntax
detected-protocols {all | sap sap-id | spoke-sdp sdp-id[:vc-id]}
Context
[Tree] (clear>service>id>stp detected-protocols)
Full Context
clear service id stp detected-protocols
Description
RSTP automatically falls back to STP mode when it receives an STP BPDU. The clear detected-protocols command forces the system to revert to the default RSTP mode on the SAP or spoke SDP.
Parameters
- all
-
Clears all detected protocol information.
- sap-id
-
Clears the specified lease state SAP information.
- sdp-id
-
The SDP ID to be cleared.
- vc-id
-
The virtual circuit ID on the SDP ID to be cleared.
Platforms
All
deterministic
deterministic
Syntax
deterministic
Context
[Tree] (tools>perform>nat deterministic)
Full Context
tools perform nat deterministic
Description
Commands in this context perform actions of deterministic NAT.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
device
device
Syntax
device [ieee-address]
Context
[Tree] (show>system>bluetooth device)
Full Context
show system bluetooth device
Description
This command displays information for Bluetooth devices registered with the system.
Parameters
- ieee-address
-
Specifies the MAC address, up to 30 characters.
Platforms
7750 SR-1, 7750 SR-s, 7950 XRS-20e
Output
Use the following command to display Bluetooth device information.
show system bluetooth deviceThe following output is an example of Bluetooth device information, and Output fields: Bluetooth device describes the output fields.
Sample output
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey : 123456 Advertising Timeout: 30
Power State : off Pairing Button : Disabled
===============================================================================
===============================================================================
Bluetooth Devices
===============================================================================
Device MAC : 12:34:12:34:12:34
Description : (Not Specified)
-------------------------------------------------------------------------------
Number of Devices : 1
===============================================================================| Label | Description |
|---|---|
|
Passkey |
The Bluetooth passkey in use by the system |
|
Advertising Timeout |
The amount of time, in seconds, that the Bluetooth module advertises it is ready to pair. |
|
Power State |
The operating mode for Bluetooth |
|
Pairing Button |
Displays whether the pairing button is enabled for use |
|
Device MAC |
The MAC address of the Bluetooth device registered for connection to the module |
|
Description |
The description of the registered Bluetooth device |
dhcp
dhcp
dhcp
dhcp
Syntax
dhcp
Context
[Tree] (tools>perform>router dhcp)
Full Context
tools perform router dhcp
Description
Commands in this context configure tools DHCP parameters.
Platforms
All
dhcp
Syntax
dhcp [filter-id]
Context
[Tree] (show>filter dhcp)
Full Context
show filter dhcp
Description
This command displays DHCP filter information.
Parameters
- filter-id
-
Displays detailed information for the specified filter ID and its filter entries.
Platforms
All
Output
The following is a sample command output for the command when no filter ID is specified.
Sample Output*B:TechPubs>config# show filter dhcp
===============================================================================
DHCP Filters
===============================================================================
Filter-Id Applied Description
-------------------------------------------------------------------------------
10 No test-dhcp-filter
-------------------------------------------------------------------------------
Num filter entries: 1
===============================================================================
*B:TechPubs>config#
*B:TechPubs>config# show filter dhcp 10
===============================================================================
DHCP Filter
===============================================================================
Filter-Id : 10 Applied : No
Entries : 0
Description : test-dhcp-filter
-------------------------------------------------------------------------------
Filter Match Criteria
-------------------------------------------------------------------------------
No Match Criteria Found
===============================================================================
*B:TechPubs>config#
dhcp-client
dhcp-client
Syntax
dhcp-client interface ip-int-name statistics
Context
[Tree] (clear>router>autoconfigure dhcp-client)
Full Context
clear router autoconfigure dhcp-client
Description
This command clears DHCP client information.
Parameters
- ip-int-name
-
Clears DHCP client information on the specified interface, up to 32 characters.
Platforms
7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-2e, 7750 SR-s
dhcp-client
Syntax
dhcp-client interface ip-int-name routes
dhcp-client interface ip-int-name statistics
dhcp-client interface ip-int-name
Context
[Tree] (show>router>autoconfigure dhcp-client)
Full Context
show router autoconfigure dhcp-client
Description
This command displays DHCP client information.
Parameters
- ip-int-name
-
Specifies the IP interface name, up to 32 characters.
- statistics
-
Displays DHCP client statistics.
- routes
-
Displays routes received by the DHCP protocol.
Platforms
7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-2e, 7750 SR-s
dhcp-rx-stats
dhcp-rx-stats
Syntax
dhcp-rx-stats [clear]
Context
[Tree] (tools>dump dhcp-rx-stats)
Full Context
tools dump dhcp-rx-stats
Description
This command displays the DHCP received packet statistics.
Parameters
- clear
-
Clears DHCP RX statistics.
Platforms
All
Output
The following output is an example of DHCP RX statistics information.
Sample Output*A:# tools dump dhcp-rx-stats
===============================================================================
DHCP Received Packet Statistics
===============================================================================
Type Received Forwarded Dropped Dropped(ESM)
-------------------------------------------------------------------------------
IPv4 DISCOVER 72 72 0 0
OFFER 2 2 0 0
REQUEST 4 4 0 0
DECLINE 0 0 0 0
ACK 1 1 0 0
NAK 0 0 0 0
RELEASE 0 0 0 0
INFORM 0 0 0 0
FORCERENEW 0 0 0 0
LEASEQUERY 0 0 0 0
LEASEUNASSIGNED 0 0 0 0
LEASEUNKNOWN 0 0 0 0
LEASEACTIVE 0 0 0 0
RENEW 2 2 0 0
-------------------------------------------------------------------------------
IPv6 SOLICIT 0 0 0 0
ADVERTISE 0 0 0 0
REQUEST 0 0 0 0
CONFIRM 0 0 0 0
RENEW 0 0 0 0
REBIND 0 0 0 0
REPLY 0 0 0 0
RELEASE 0 0 0 0
DECLINE 0 0 0 0
RECONFIGURE 0 0 0 0
INFO_REQUEST 0 0 0 0
RELAY_FORW 0 0 0 0
RELAY_REPLY 0 0 0 0
LEASEQUERY 0 0 0 0
LEASEQUERY_REPLY 0 0 0 0
-------------------------------------------------------------------------------
Total 81 81 0 0
-------------------------------------------------------------------------------
Maximum queue length : 0
Maximum outst pbufs total : 1
Maximum outst pbufs to client : 1
===============================================================================
dhcp6
dhcp6
dhcp6
dhcp6
Syntax
dhcp6
Context
[Tree] (tools>perform>router dhcp6)
Full Context
tools perform router dhcp6
Description
Commands in this context configure tools DHCP6 parameters.
Platforms
All
dhcp6
Syntax
dhcp6 [filter-id]
Context
[Tree] (show>filter dhcp6)
Full Context
show filter dhcp6
Description
This command displays DHCP6 filter information.
Parameters
- filter-id
-
Displays detailed information for the specified filter ID and its filter entries.
Platforms
All
dhcp6-client
dhcp6-client
Syntax
dhcp6-client interface ip-int-name statistics
Context
[Tree] (clear>router>autoconfigure dhcp6-client)
Full Context
clear router autoconfigure dhcp6-client
Description
This command clears DHCPv6 client information.
Parameters
- ip-int-name
-
Clears DHCPv6 client information on the specified interface, up to 32 characters.
Platforms
7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-2e, 7750 SR-s
dhcp6-client
Syntax
dhcp6-client interface ip-int-name
dhcp6-client interface ip-int-name statistics
Context
[Tree] (show>router>autoconfigure dhcp6-client)
Full Context
show router autoconfigure dhcp6-client
Description
This command displays DHCPv6 client information.
Parameters
- ip-int-name
-
Specifies the IP interface name, up to 32 characters.
- statistics
-
Displays DHCPv6 client statistics.
Platforms
7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-2e, 7750 SR-s
diameter
diameter
Syntax
diameter
Context
[Tree] (tools>dump>debug diameter)
Full Context
tools dump debug diameter
Description
Commands in this context dump debug information for diameter.
diameter
Syntax
diameter
Context
[Tree] (show>service>active-subscribers>hierarchy diameter)
Full Context
show service active-subscribers hierarchy diameter
Description
This command provides information about the active Diameter Gx and Diameter Gy session IDs.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following example shows the active Diameter Gx and Gy session IDs and Active subscriber hierarchy diameter field descriptions describes the output fields.
show service active-subscribers hierarchy diameter===============================================================================
Active Subscribers Hierarchy (diameter information)
===============================================================================
-- ipoe-1
(sub-profile-1)
|
+-- sap:[1/x1/1/c1/4:2211.2005] - sla:sla-profile-1
| Gy-diam-session-id:bng-gy.realm-2.com;1668427651;23
|
+-- IPOE-Session - mac:00:bb:02:00:00:05
| Gx-diam-session-id:bng-nasreq-gx.realm-1.com;1668427651;22
|
|-- 10.2.1.13
|
+-- 2001:db8:b002:100::1/128
|
+-- 2001:db8:b002:101::/64
-------------------------------------------------------------------------------
Number of active subscribers : 1
Flags: (N) = the host or the managed route is in non-forwarding state
===============================================================================
|
Field |
Description |
|---|---|
|
Gy-diam-session-id |
The active Diameter Gy session ID for this SLA Profile Instance. N/A when no session is active. |
|
Gx-diam-session-id |
The active Diameter Gx session ID for this subscriber host or session. N/A when no session is active. |
diameter-application-policy
diameter-application-policy
Syntax
diameter-application-policy [name]
Context
[Tree] (show>subscr-mgmt diameter-application-policy)
Full Context
show subscriber-mgmt diameter-application-policy
Description
This command displays Diameter application policy information.
Parameters
- name
Specifies the application policy, up to 32 characters, for which orphaned Gx sessions are displayed.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following is an example of subscriber management Diameter application policy information
Sample Output# show subscriber-mgmt diameter-application-policy
===============================================================================
DIAMETER application policies
===============================================================================
Name Description
-------------------------------------------------------------------------------
diameter-gx-policy-1 Diameter Gx policy
diameter-gy-policy-1 Diameter Gy policy
diameter-nasreq-policy-1 Diameter NASREQ policy
-------------------------------------------------------------------------------
No. of policies: 3
===============================================================================
# show subscriber-mgmt diameter-application-policy "diameter-nasreq-policy-1"
===============================================================================
DIAMETER application policy "diameter-nasreq-policy-1"
===============================================================================
Description : Diameter NASREQ policy
Session failover : enabled
Failover handling : continue
Application : nasreq
Tx timer (s) : 10
Last management change : 02/28/2015 14:53:49
-------------------------------------------------------------------------------
NASREQ
-------------------------------------------------------------------------------
Include AVP : nas-port-id
nas-port-type
NAS-Port-Id prefix type : none
NAS-Port-Id suffix type : user-string
NAS-Port-Id suffix : @bng1
NAS-Port-Type type : standard
User name format : mac
User name operation : no-operation
MAC address format : aa:
Last management change : 02/28/2015 14:53:49
===============================================================================
Interfaces using diameter-auth-policy "diameter-nasreq-policy-1"
-------------------------------------------------------------------------------
Interface-name Service-id Type
-------------------------------------------------------------------------------
group-int-1-1 1000 IES
-------------------------------------------------------------------------------
No. of interfaces: 1
-------------------------------------------------------------------------------
VPLS SAP's with diameter-auth-policy "diameter-nasreq-policy-1"
-------------------------------------------------------------------------------
Service SAP
-------------------------------------------------------------------------------
10 1/1/4:*.*
-------------------------------------------------------------------------------
No. of SAP's: 1
-------------------------------------------------------------------------------
*A:Dut-C# show subscriber-mgmt diameter-application-policy "diamapppol_gx"
===============================================================================
DIAMETER application policy "diamapppol_gx"
===============================================================================
Description : (Not Specified)
Session failover : enabled
Failover handling : retry-and-terminate
Peer policy : diampeerpol_gx
Application : gx
Tx timer (s) : 10
Last management change : 05/08/2015 05:55:59
-------------------------------------------------------------------------------
Gx
-------------------------------------------------------------------------------
Include AVP : an-gw-address
Calling-Station-Id type : mac
NAS-Port bits spec : 0
NAS-Port-Id prefix type : user-string
NAS-Port-Id prefix : Testing
NAS-Port-Id suffix type : circuit-id
NAS-Port-Type value : 0
User-Equipment-Info : mac
Subscription-Id-Data origin : subscriber-id
Subscription-Id-Data type : e164
MAC address format : aa:
Report IP address event : enabled
CCR-t replay interval : 60
Last management change : 05/08/2015 06:54:27
Diameter Application Policy Field Descriptions describes diameter application policy output fields.
|
Field |
Description |
|---|---|
|
Description |
The user provided description of this policy |
|
Session failover |
Failover is enabled or disabled |
|
Failover Handling |
Handling is retry-and-terminate or terminate |
|
Peer policy |
The diameter application peer policy name |
|
Application |
The policy’s application, gx, gy, or nasreq |
|
Tx timer (s) |
The maximum wait time (seconds) while a client is pending |
|
Last management change |
The time of the most recent management-initiated change to this policy |
|
Include AVP |
The attribute-value-pairs for Gx messages |
|
Calling-Station-Id type |
The string that is put in the RADIUS Calling-Station-Id attribute if included in RADIUS authentication request messages |
|
NAS-Port bits spec |
The number that is put in the RADIUS NAS-Port attribute if included in RADIUS authentication request messages |
|
NAS-Port-Id prefix type |
The type of prefix that is added to the NAS-Port-Id attribute if included in RADIUS accounting-request messages |
|
NAS-Port-Id prefix |
The user configurable string that is added as the prefix to the NAS-Port attribute if included in RADIUS accounting-request messages |
|
NAS-Port-Id suffix type |
The user configurable string that is added as the suffix to the NAS-Port attribute if included in RADIUS accounting-request messages |
|
NAS-Port-Type value |
The value that is put in the RADIUS NAS-Port-Type attribute if included in RADIUS accounting-request messages |
|
User-Equipment-Info |
The user equipment info, eui64, imeisv, mac, or modified-eui64 |
diameter-application-policy
Syntax
diameter-application-policy name statistics
Context
[Tree] (clear>subscr-mgmt diameter-application-policy)
Full Context
clear subscriber-mgmt diameter-application-policy
Description
This command clears Diameter application policy data.
Parameters
- name
-
Specifies the Diameter application policy name, up to 32 characters.
- statistics
-
Clears Diameter application policy statistics.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
diameter-node
diameter-node
Syntax
diameter-node origin-host-string peer dest-host-string
diameter-node origin-host-string peer dest-host-string statistics
diameter-node origin-host-string peers
diameter-node origin-host-string routing-table
Context
[Tree] (show>aaa diameter-node)
Full Context
show aaa diameter-node
Description
This command displays information about a Diameter node.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following are examples of Diameter node information.
Sample Outputshow aaa diameter node "node1.myrealm.com" routing-table
===============================================================================
Diameter Routing Table (Node: node1.myrealm.com)
===============================================================================
Realm Name Appl Pref:Index Server-Identifier
-------------------------------------------------------------------------------
subrealm.telenet.be Gx 30:1 node1.subrealm.telenet.be
telenet.be Gx 60 node2.subrealm.telenet.be
telenet.be relay 50 node3.subrealm.telenet.be
-------------------------------------------------------------------------------
No. of Routes: 5
===============================================================================
Diameter Node Routing Table Field Descriptions describes routing entries in the Diameter realm-based routing table fields.
|
Field |
Description |
|---|---|
|
Realm Name |
The destination realm name |
|
Appl |
The application for which this route will be used. Supported applications:
|
|
Pref:Index |
The preference and index of the peer. Peers for the same realm are selected in order of preference. Peers with the lowest preference are preferred. If multiple peers have the same preference for the same realm, the peer with a lowest index is selected. Preference and index are user-configured parameters. |
|
Server-Identifier |
The next hop peer name |
show aaa diameter node "node1.myrealm.com" peer "relay.telenet.be"
===============================================================================
Diameter Node : node1.myrealm.com
===============================================================================
Index : 1
Remote Host Identity : relay.telenet.be
Remote Realm : telenet.be
Remote IP address : 13.0.1.5
Remote Port: 3868
Remote Origin-State-Id : 1522062441
Local Host Identity : bng1.bng.nokia.com
Local Realm : bng.nokia.com
Local IP address : 13.0.1.4
Local port: 3456
Peer Admin State : Up
Peer Active : Yes
Peer Status : I-Open
Active Applications : nasreq gx
Last Disconnect Cause : rebooting
Preference : 4
Connection Timer (Tc) : 10
Watchdog Timer (Tw) : 237
...
Last Mgmt Change : 03/23/2018 11:42:43
Diameter Node Peer Field Descriptions describes Diameter node peer fields.
|
Field |
Description |
|---|---|
|
Diameter Node |
The Diameter node under which this peer is active |
|
Index |
The Peer index is a peer configuration parameter |
|
Remote Host Identity |
The peer identity |
|
Remote Realm |
The realm to which the peer belongs |
|
Remote IP address |
The IP address of the peer |
|
Remote Port |
The port on the peer used for Diameter communication |
|
Remote Origin-State-Id |
The Origin-State-Id of the peer |
|
Local Host Identity |
The local identity |
|
Local Realm |
The local realm name |
|
Local IP address |
The local IP address |
|
Local Port |
The local port used for Diameter communication |
|
Peer Admin State |
The administrative state of the configured peer |
|
Peer Active |
Indicates whether the connection towards the peer is active |
|
Peer Status |
The operational status of the configured peer |
|
Active Applications |
The applications used over this peer |
|
Last Disconnect Cause |
The last disconnect cause |
|
Preference |
The configured preference of the peer |
|
Connection Timer (Tc) |
The timer used to initiate connections towards the peer. In case that the connection is not successfully established, a new attempt is periodically tried (every Tc interval) |
|
Watchdog Timer (Tw) |
The watchdog timer value that detects the failed connection towards the peer |
|
Last Mgmt Change |
The date and time of the last management change |
show aaa diameter node "node1.myrealm.com" peer-table
===============================================================================
Diameter Peer Table (Node: node1.myrealm.com)
===============================================================================
Host Identity StatusT Susp
-------------------------------------------------------------------------------
relay.telenet.be
I-Open No
relay.proximus.be
I-Open No
relay.proximus.be
Closed No
-------------------------------------------------------------------------------
No. of Active Peers: 2
Diameter Node Peer Table Field Descriptions describes Diameter node peer table fields.
|
Field |
Description |
|---|---|
|
Node |
The Diameter node name |
|
Host Identity |
The peer identity |
|
StatusT |
The status of the peer |
|
Susp |
The suspension state of the peer (based on watchdogs) |
|
Server-Identifier |
The next hop peer name |
show aaa diameter-node "gyrouter.workstation.be" peer "gyserver-1.workstation.be" statistics
===============================================================================
Peer "gyserver-1.workstation.be"
===============================================================================
Message Sent Received
-------------------------------------------------------------------------------Capabilities-Exchange-Request 2 0
Capabilities-Exchange-Answer 0 2
Disconnect-Peer-Request 0 0
Disconnect-Peer-Answer 0 0
Device-Watchdog-Request 188 0
Device-Watchdog-Answer 0 188
Application message request 2367 0
Application message answer 0 2366
Last cleared time: N/A
===============================================================================
show aaa diameter-node "sr" routing-table
===============================================================================
Routes
===============================================================================
Realm-Name
Application Pref. Entry Server-Identifier
-------------------------------------------------------------------------------
realm-2
(relay) 5 dynamic node-b
realm-3
gx 10 static node-b
realm-4
gy 20 static node-b
realm-2
(relay) 5 dynamic node-c
realm-3
gx 20 static node-c
realm-4
gy 10 static node-c
-------------------------------------------------------------------------------
No. of routes: 6
===============================================================================
A:Dut-C#
Diameter Node SR Routing Table Field Descriptions describes the Diameter node SR table fields.
|
Field |
Description |
|---|---|
|
Realm Name |
The destination realm name |
|
Application |
The application for which this route will be used. Supported applications:
|
|
Pref |
The preference and index of the peer. Peers for the same realm are selected in order of preference. Peers with higher preference are preferred. If multiple peers have the same preference for the same realm, the peer with a lowest index is selected. Preference and index are user-configured parameters. |
|
Entry |
Dynamic or static diameter route |
|
Server-Identifier |
The next hop peer name |
diameter-node
Syntax
diameter-node origin-host-string peer dest-host-string statistics
Context
[Tree] (clear>aaa diameter-node)
Full Context
clear aaa diameter-node
Description
This command clears Diameter node data.
Parameters
- origin-host-string
-
Specifies the origin host name, up to 80 characters.
- dest-host-string
-
Specifies the destination host name, up to 80 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
diameter-session
diameter-session
Syntax
diameter-session
Context
[Tree] (show>subscr-mgmt diameter-session)
Full Context
show subscriber-mgmt diameter-session
Description
Commands in this context display diameter session information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
diameter-session
Syntax
diameter-session
Context
[Tree] (clear>subscr-mgmt diameter-session)
Full Context
clear subscriber-mgmt diameter-session
Description
This command clears diameter session data.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
direct-export
direct-export
Syntax
direct-export
Context
[Tree] (show>app-assure>group>cflowd direct-export)
Full Context
show application-assurance group cflowd direct-export
Description
Commands in this context display cflowd direct-export output.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
discovery
discovery
Syntax
discovery [{peer [ip-address]} | {interface [ ip-int-name]}] [state state] [detail] [ adjacency-type type]
discovery [state state] [detail | summary] [adjacency-type type] [session ip-addr[label-space]]
discovery [state state] [detail | summary] [adjacency-type type] [family]
discovery interface [ip-int-name] [state state] [detail | summary] [session ip-addr[label-space]]
discovery peer [ip-address] [state state] [ detail | summary] [session ip-addr[ label-space]]
Context
[Tree] (show>router>ldp discovery)
Full Context
show router ldp discovery
Description
This command displays the status of the interfaces participating in LDP discovery.
Parameters
- peer ip-address
-
Specifies to display the IP address of the peer.
- interface ip-int-name
-
The name of an existing interface. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
- state state
-
Specifies to display the current operational state of the adjacency.
- detail
-
Specifies to display detailed information.
- family
-
Displays either IPv4 or IPv6 LDP session information.
- adjacency-type type
-
Specifies to display the adjacency type.
Platforms
All
Output
LDP Discovery Output
LDP Discovery Output Fields describes the LDP discovery output fields.
|
Label |
Description |
|---|---|
|
Interface Name |
The name of the interface. |
|
Local Addr |
The IP address of the originating (local) router. |
|
Peer Addr |
The IP address of the peer. |
|
AdjType |
The adjacency type between the LDP peer and LDP session is targeted. |
|
State |
Established — The adjacency is established. Trying — The adjacency is not yet established. |
|
No. of Hello Adjacencies |
The total number of hello adjacencies discovered. |
|
Up Time |
The amount of time the adjacency has been enabled. |
|
Hold Time Remaining |
The time left before a neighbor is declared to be down. |
*A:Dut-A# show router ldp discovery
==============================================================================
LDP IPv4 Hello Adjacencies
==============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 192.0.2.1:0 Estab
targ 198.51.100.1:0
N/A 192.0.2.1:0 Estab
targ 203.0.113.1:0
to_SR2 192.0.2.1:0 Estab
link 198.51.100.1:0
to_SR2_2 192.0.2.1:0 Estab
link 198.51.100.1:0
to_SR3 192.0.2.1:0 Estab
link 203.0.113.1:0
No. of IPv4 Hello Adjacencies: 5
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
to_SR2 10.0.50.1:0 Estab
link 10.0.50.2:0
to_SR2_2 fe80::4624:1ff:fe01:6 Trying
link ff02::2
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 2
===============================================================================
*A:Dut-A# show router ldp discovery detail
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 198.51.100.1
-------------------------------------------------------------------------------
Local Address : 192.0.2.1:0
Peer Address : 198.51.100.1:0
Adjacency Type : targeted State : Established
Up Time : 0d 00:22:58 Hold Time Remaining : 38
Hello Mesg Recv : 104 Hello Mesg Sent : 104
Local IP Address : 192.0.2.1
Peer IP Address : 198.51.100.1
Local Hello Timeout: 45 Remote Hello Timeout: 45
Local Cfg Seq No : 2476449752 Remote Cfg Seq No : 2494880985
Lcl IPv4 P2MP Capbl: Disabled Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled
-------------------------------------------------------------------------------
Peer 203.0.113.1
-------------------------------------------------------------------------------
Local Address : 192.0.2.1:0
Peer Address : 198.51.100.1:0
Adjacency Type : targeted State : Established
Up Time : 0d 00:27:24 Hold Time Remaining : 36
Hello Mesg Recv : 124 Hello Mesg Sent : 124
Local IP Address : 192.0.2.1
Peer IP Address : 203.0.113.1
Local Hello Timeout: 45 Remote Hello Timeout: 45
Local Cfg Seq No : 1472397992 Remote Cfg Seq No : 2705515863
Lcl IPv4 P2MP Capbl: Enabled Rem IPv4 P2MP Capbl : Enabled (R)
Lcl IPv6 P2MP Capbl: Enabled Rem IPv6 P2MP Capbl : Enabled (R)
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled (R)
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled (R)
-------------------------------------------------------------------------------
Interface "to_SR2"
-------------------------------------------------------------------------------
Local Address : 192.0.2.1:0
Peer Address : 198.51.100.1:0
Adjacency Type : link State : Established
Up Time : 0d 00:23:11 Hold Time Remaining : 13
Hello Mesg Recv : 366 Hello Mesg Sent : 365
Local IP Address : 10.0.60.1
Peer IP Address : 10.0.60.2
Local Hello Timeout: 15 Remote Hello Timeout: 15
Local Cfg Seq No : 416151817 Remote Cfg Seq No : 2265512807
Lcl IPv4 P2MP Capbl: Enabled Rem IPv4 P2MP Capbl : Enabled (R)
Lcl IPv6 P2MP Capbl: Enabled Rem IPv6 P2MP Capbl : Enabled (R)
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled (R)
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled (R)
-------------------------------------------------------------------------------
Interface "to_SR2_2"
-------------------------------------------------------------------------------
Local Address : 192.0.2.1:0
Peer Address : 198.51.100.1:0
Adjacency Type : link State : Established
Up Time : 0d 00:23:12 Hold Time Remaining : 13
Hello Mesg Recv : 368 Hello Mesg Sent : 367
Local IP Address : 60.60.61.1
Peer IP Address : 60.60.61.2
Local Hello Timeout: 15 Remote Hello Timeout: 15
Local Cfg Seq No : 1472397992 Remote Cfg Seq No : 2705515863
Lcl IPv4 P2MP Capbl: Enabled Rem IPv4 P2MP Capbl : Enabled (R)
Lcl IPv6 P2MP Capbl: Enabled Rem IPv6 P2MP Capbl : Enabled (R)
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled (R)
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled (R)
-------------------------------------------------------------------------------
Interface "to_SR3"
-------------------------------------------------------------------------------
Local Address : 192.0.2.1:0
Peer Address : 203.0.113.1:0
Adjacency Type : link State : Established
Up Time : 0d 00:27:36 Hold Time Remaining : 12
Hello Mesg Recv : 438 Hello Mesg Sent : 437
Local IP Address : 10.0.90.1
Peer IP Address : 10.0.90.2
Local Hello Timeout: 15 Remote Hello Timeout: 15
Local Cfg Seq No : 3784603428 Remote Cfg Seq No : 1928455485
Lcl IPv4 P2MP Capbl: Enabled Rem IPv4 P2MP Capbl : Enabled (R)
Lcl IPv6 P2MP Capbl: Enabled Rem IPv6 P2MP Capbl : Enabled (R)
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled (R)
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled (R)
===============================================================================
No. of IPv4 Hello Adjacencies: 5
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Interface "to_SR2"
-------------------------------------------------------------------------------
Local Address : 10.0.50.1:0
Peer Address : 10.0.50.2:0
Adjacency Type : link State : Established
Up Time : 0d 00:19:22 Hold Time Remaining : 12
Hello Mesg Recv : 306 Hello Mesg Sent : 306
Local IP Address : fe80::4624:1ff:fe01:1
Peer IP Address : fe80::4651:1ff:fe01:1
Local Hello Timeout: 15 Remote Hello Timeout: 15
Local Cfg Seq No : 3349779675 Remote Cfg Seq No : 4177487405
Lcl IPv4 P2MP Capbl: Enabled Rem IPv4 P2MP Capbl : Enabled (R)
Lcl IPv6 P2MP Capbl: Enabled Rem IPv6 P2MP Capbl : Enabled (R)
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled (R)
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled (R)
-------------------------------------------------------------------------------
Interface "to_SR2_2"
-------------------------------------------------------------------------------
Local Address : fe80::4624:1ff:fe*
Peer Address : ff02::2
Adjacency Type : link State : Trying
===============================================================================
No. of IPv6 Hello Adjacencies: 2
===============================================================================
* indicates that the corresponding row element may have been truncated
*A:Dut-A#
*A:Dut-A# show router ldp discovery peer detail
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 10.20.1.6
-------------------------------------------------------------------------------
Local Address : 10.20.1.1:0
Peer Address : 10.20.1.6:0
Adjacency Type : targeted State : Established
Up Time : 0d 00:02:48 Hold Time Remaining : 15
Hello Mesg Recv : 46 Hello Mesg Sent : 45
Local IP Address : 10.20.1.1
Peer IP Address : 10.20.1.6
Local Hello Timeout: 15 Remote Hello Timeout: 15
Local Cfg Seq No : 3886383873 Remote Cfg Seq No : 3487172342
Lcl IPv4 P2MP Capbl: Disabled Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled
===============================================================================
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 3ffe::a14:106
-------------------------------------------------------------------------------
Local Address : 3ffe::a14:101[0]
Peer Address : 3ffe::a14:106[0]
Adjacency Type : targeted State : Established
Up Time : 0d 00:01:03 Hold Time Remaining : 34
Hello Mesg Recv : 6 Hello Mesg Sent : 5
Local IP Address : 3ffe::a14:101
Peer IP Address : 3ffe::a14:106
Local Hello Timeout: 45 Remote Hello Timeout: 45
Local Cfg Seq No : 4281565287 Remote Cfg Seq No : 1836745726
Lcl IPv4 P2MP Capbl: Disabled Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled
===============================================================================
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery adjacency-type targeted
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 10.20.1.1:0 Estab
targ 10.20.1.6:0
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 3ffe::a14:101[0] Estab
targ 3ffe::a14:106[0]
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery adjacency-type targeted ipv6 state established
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 3ffe::a14:101[0] Estab
targ 3ffe::a14:106[0]
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
===============================================================================
*A:Dut-A# show router ldp discovery peer
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 10.20.1.1:0 Estab
targ 10.20.1.6:0
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 3ffe::a14:101[0] Estab
targ 3ffe::a14:106[0]
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery peer 10.20.1.6
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 10.20.1.1:0 Estab
targ 10.20.1.6:0
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery peer 10.20.1.6 detail
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 10.20.1.6
-------------------------------------------------------------------------------
Local Address : 10.20.1.1:0
Peer Address : 10.20.1.6:0
Adjacency Type : targeted State : Established
Up Time : 0d 00:02:25 Hold Time Remaining : 11
Hello Mesg Recv : 39 Hello Mesg Sent : 39
Local IP Address : 10.20.1.1
Peer IP Address : 10.20.1.6
Local Hello Timeout: 15 Remote Hello Timeout: 15
Local Cfg Seq No : 3886383873 Remote Cfg Seq No : 3487172342
Lcl IPv4 P2MP Capbl: Disabled Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled
===============================================================================
No. of IPv4 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery peer detail
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 10.20.1.6
-------------------------------------------------------------------------------
Local Address : 10.20.1.1:0
Peer Address : 10.20.1.6:0
Adjacency Type : targeted State : Established
Up Time : 0d 00:02:48 Hold Time Remaining : 15
Hello Mesg Recv : 46 Hello Mesg Sent : 45
Local IP Address : 10.20.1.1
Peer IP Address : 10.20.1.6
Local Hello Timeout: 15 Remote Hello Timeout: 15
Local Cfg Seq No : 3886383873 Remote Cfg Seq No : 3487172342
Lcl IPv4 P2MP Capbl: Disabled Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled
===============================================================================
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Peer 3ffe::a14:106
-------------------------------------------------------------------------------
Local Address : 3ffe::a14:101[0]
Peer Address : 3ffe::a14:106[0]
Adjacency Type : targeted State : Established
Up Time : 0d 00:01:03 Hold Time Remaining : 34
Hello Mesg Recv : 6 Hello Mesg Sent : 5
Local IP Address : 3ffe::a14:101
Peer IP Address : 3ffe::a14:106
Local Hello Timeout: 45 Remote Hello Timeout: 45
Local Cfg Seq No : 4281565287 Remote Cfg Seq No : 1836745726
Lcl IPv4 P2MP Capbl: Disabled Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Disabled Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled
===============================================================================
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery adjacency-type targeted
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 10.20.1.1:0 Estab
targ 10.20.1.6:0
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 3ffe::a14:101[0] Estab
targ 3ffe::a14:106[0]
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery adjacency-type targeted ipv6 state established
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 3ffe::a14:101[0] Estab
targ 3ffe::a14:106[0]
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery session 10.20.1.6
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 10.20.1.1:0 Estab
targ 10.20.1.6:0
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery interface "ip-10.10.1.1"
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
ip-10.10.1.1 10.20.1.1:0 Estab
link 10.20.1.2:0
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
ip-10.10.1.1 3ffe::a14:101[0] Estab
link 3ffe::a14:102[0]
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery interface "ip-10.10.1.1" detail
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Interface "ip-10.10.1.1"
-------------------------------------------------------------------------------
Local Address : 10.20.1.1:0
Peer Address : 10.20.1.2:0
Adjacency Type : link State : Established
Up Time : 0d 00:26:52 Hold Time Remaining : 14
Hello Mesg Recv : 426 Hello Mesg Sent : 423
Local IP Address : 10.10.1.1
Peer IP Address : 10.10.1.2
Local Hello Timeout: 15 Remote Hello Timeout: 15
Local Cfg Seq No : 3499624168 Remote Cfg Seq No : 1622338078
Lcl IPv4 P2MP Capbl: Enabled Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Enabled Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled
===============================================================================
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
-------------------------------------------------------------------------------
Interface "ip-10.10.1.1"
-------------------------------------------------------------------------------
Local Address : 3ffe::a14:101[0]
Peer Address : 3ffe::a14:102[0]
Adjacency Type : link State : Established
Up Time : 0d 00:26:32 Hold Time Remaining : 12
Hello Mesg Recv : 421 Hello Mesg Sent : 418
Local IP Address : fe80::11
Peer IP Address : fe80::12
Local Hello Timeout: 15 Remote Hello Timeout: 15
Local Cfg Seq No : 1658693689 Remote Cfg Seq No : 4291225243
Lcl IPv4 P2MP Capbl: Enabled Rem IPv4 P2MP Capbl : Enabled
Lcl IPv6 P2MP Capbl: Enabled Rem IPv6 P2MP Capbl : Enabled
Lcl IPv4 Pfx Capbl : Enabled Rem IPv4 Pfx Capbl : Enabled
Lcl IPv6 Pfx Capbl : Enabled Rem IPv6 Pfx Capbl : Enabled
===============================================================================
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery interface "ip-10.10.1.1" summary
No. of IPv4 Hello Adjacencies: 1
No. of IPv6 Hello Adjacencies: 1
*A:Dut-A#
*A:Dut-A# show router ldp discovery interface "ip-10.10.2.1" state established
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
ip-10.10.2.1 10.20.1.1:0 Estab
link 10.20.1.3:0
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
ip-10.10.2.1 3ffe::a14:101[0] Estab
link 3ffe::a14:103[0]
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery state established
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 10.20.1.1:0 Estab
targ 10.20.1.6:0
ip-10.10.1.1 10.20.1.1:0 Estab
link 10.20.1.2:0
ip-10.10.2.1 10.20.1.1:0 Estab
link 10.20.1.3:0
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 3
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
N/A 3ffe::a14:101[0] Estab
targ 3ffe::a14:106[0]
ip-10.10.1.1 3ffe::a14:101[0] Estab
link 3ffe::a14:102[0]
ip-10.10.2.1 3ffe::a14:101[0] Estab
link 3ffe::a14:103[0]
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 3
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery adjacency-type link
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
ip-10.10.1.1 10.20.1.1:0 Estab
link 10.20.1.2:0
ip-10.10.2.1 10.20.1.1:0 Estab
link 10.20.1.3:0
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 2
===============================================================================
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
ip-10.10.1.1 3ffe::a14:101[0] Estab
link 3ffe::a14:102[0]
ip-10.10.2.1 3ffe::a14:101[0] Estab
link 3ffe::a14:103[0]
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 2
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery adjacency-type link ipv6
===============================================================================
LDP IPv6 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
ip-10.10.1.1 3ffe::a14:101[0] Estab
link 3ffe::a14:102[0]
ip-10.10.2.1 3ffe::a14:101[0] Estab
link 3ffe::a14:103[0]
-------------------------------------------------------------------------------
No. of IPv6 Hello Adjacencies: 2
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery session 10.20.1.2
===============================================================================
LDP IPv4 Hello Adjacencies
===============================================================================
Interface Name Local Addr State
AdjType Peer Addr
-------------------------------------------------------------------------------
ip-10.10.1.1 10.20.1.1:0 Estab
link 10.20.1.2:0
-------------------------------------------------------------------------------
No. of IPv4 Hello Adjacencies: 1
===============================================================================
*A:Dut-A#
*A:Dut-A# show router ldp discovery session 10.20.1.2 summary
No. of IPv4 Hello Adjacencies: 1
*A:Dut-A#
dist-cpu-protection
dist-cpu-protection
Syntax
cpu-protection
Context
[Tree] (show>system>security dist-cpu-protection)
Full Context
show system security dist-cpu-protection
Description
Commands in this context display Distributed CPU Protection information.
Platforms
All
dist-cpu-protection
Syntax
dist-cpu-protection
Context
[Tree] (tools>perform>security dist-cpu-protection)
[Tree] (tools>dump>security dist-cpu-protection)
Full Context
tools perform security dist-cpu-protection
tools dump security dist-cpu-protection
Description
This command displays to release Distributed CPU Protection parameters and status at the per card and forwarding plane level.
Platforms
All
dist-cpu-protection
Syntax
dist-cpu-protection [detail]
Context
[Tree] (show>port dist-cpu-protection)
Full Context
show port dist-cpu-protection
Description
This command displays distributed CPU protection information.
Parameters
- detail
-
Displays detailed information.
Platforms
All
diversity
diversity
Syntax
diversity diversity-assoc-name
Context
[Tree] (show>router>pcep>pcc>pce-assoc diversity)
Full Context
show router pcep pcc pce-associations diversity
Description
This command displays the diversity association information.
If a diversity association name is not specified, the information for all configured diversity associations is displayed.
Parameters
- diversity-assoc-name
-
Specifies the diversity association name.
Platforms
All
Output
The following output is an example of diversity association information, and Show Diversity Association Descriptions describes the output fields.
Sample Output*A:Dut-C>config>router>mpls>lsp# show router pcep pcc pce-associations diversity "test_div"
===============================================================================
PCEP PCC Diversity Associations Info
===============================================================================
Assocation Name : test_div
Association ID : 20 Association Source : 192.168.213.59
Diversity Type : link Disjointness Type : loose
Disjoint Reference : False
===============================================================================
|
Label |
Description |
|---|---|
|
Association Name |
The diversity association name |
|
Association ID |
The diversity association ID |
|
Association Source |
The diversity source address of the diversity association. Both IPv4 and IPv6 addresses are supported. |
| Diversity Type |
The diversity type of the diversity association |
|
Disjointness Type |
The disjointness type of the diversity association |
|
Disjoint Reference |
The P-flag value conveyed to the disjointness configuration TLV |
dm
dm
Syntax
dm [interval seconds] [ repeat repeat] [absolute | rate]
Context
[Tree] (monitor>oam-pm>session dm)
Full Context
monitor oam-pm session dm
Description
This command monitors the MPLS Delay Measurement (DM) statistics for the specified test's raw measurement interval.
Parameters
- seconds
-
Specifies the time interval, in seconds.
- repeat
-
Specifies the number of times the command is repeated.
- absolute
-
Specifies that the raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.
- rate
-
Specifies that the rate-per-second is displayed.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
dm
Syntax
dm
Context
[Tree] (show>oam-pm>stats>session dm)
Full Context
show oam-pm statistics session dm
Description
This command selects the session's MPLS DM test for the statistical display.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
dmm
dmm
Syntax
dmm [interval seconds] [ repeat repeat] [absolute | rate]
Context
[Tree] (monitor>oam-pm>session dmm)
Full Context
monitor oam-pm session dmm
Description
This command monitors the Ethernet Delay Measurement Message (DMM) statistics for the specified test's raw measurement interval.
Parameters
- seconds
-
Specifies the time interval, in seconds.
- repeat
-
Specifies the number of times the command is repeated.
- absolute
-
Specifies that the raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.
- rate
-
Specifies that the rate-per-second is displayed.
Platforms
All
dmm
Syntax
dmm
Context
[Tree] (show>oam-pm>stats>session dmm)
Full Context
show oam-pm statistics session dmm
Description
This command selects the session's Ethernet DMM test for the statistical display.
Platforms
All
dns
dns
Syntax
dns
Context
[Tree] (show>router dns)
Full Context
show router dns
Description
This command displays DNS information.
Platforms
All
Output
The following output is an example of DNS settings information.
Sample Output*A:Dut-C# show router dns
===============================================================================
Redirect VPRN : Service: 300
Administrative state : enabled
Default domain name : (Not Specified)
Primary DNS : 9.0.0.22
Secondary DNS : 2009::16
Tertiary DNS : (Not Specified)
IPv4 source address : 5.1.45.3
IPv6 source address : 2005::1:2d:3
Last management change : 01/13/2020 11:00:13
dns-ip-cache
dns-ip-cache
Syntax
dns-ip-cache cache-name isa mda-id
dns-ip-cache cache-name
Context
[Tree] (show>app-assure>group dns-ip-cache)
Full Context
show application-assurance group dns-ip-cache
Description
This command displays the application assurance DNS IP cache statistics and status information.
Parameters
- cache-name
-
Specifies the DNS IP cache for a particular ISA-AA card, up to 32 characters.
- mda-id
-
Specifies the AA ISA.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
Show DNS IP Cache Output Fields describes the show command output fields.
|
Label |
Description |
|---|---|
|
Admin Status |
Indicates the administrative status of the DNS IP cache. [Up | Down] |
|
Domain expressions |
Indicates the number of DNS domain expressions configured. |
|
Server addresses |
Indicates the number of server-addresses configured |
|
High-Watermark |
Indicates the value, in percentage, of the configured high watermark. |
|
Low-Watermark |
Indicates the value, in percentage, of the configured low watermark. |
|
Cache-size |
Indicates the value of the configured maximum cache size. |
|
Usage |
Indicates the value, in percentage, of the total for the number of entries in the cache. |
|
Alarm State |
Indicates the status of the alarm related to the DNS IP cache high/low watermark utilization. The alarm is raised when the high watermark is crossed; it is cleared when it goes below the low watermark. [Clear | Raised] |
|
Hit-Count |
Indicates the number of times an IP address lookup in this cache was successful. |
|
Total responses |
Indicates the total number of DNS responses analyzed. |
|
Domain name matched |
Indicates the number of times a domain name defined in the DNS match criteria matched a DNS response. |
|
Domain & server matched |
Indicates the number of times both the domain name and server address defined in the DNS match criteria matched a DNS response. |
|
Total entries added |
Indicates the total number of IP entries added in the cache. |
|
Total entries removed |
Indicates the total number of IP entries removed from the cache after the entry expired. |
|
Full count |
Indicates the total number of IP entries in the cache. |
|
Hit Count |
Indicates the number of times an IP address lookup in this cache was successful. The IP address lookup is performed in app-filters and is successful if the server address DNS IP cache criteria is met. |
|
Miss Count |
Indicates the number of times an IP address lookup in this cache was unsuccessful. The IP address lookup is performed in app-filters and is unsuccessful if the server address DNS IP cache criteria is not met. |
*A:7750# show application-assurance group 1 dns-ip-cache "Default DNS IP Cache"
===============================================================================
Application Assurance Group 1 dns-ip-cache "Default DNS IP Cache"
===============================================================================
Admin Status : Up
Domain expressions : 11 (out of 32)
Server addresses : 0 (out of 64)
High watermark : 40%
Low watermark : 35%
Cache size : 5000
-------------------------------------------------------------------------------
ISA Usage (%) Alarm Hit Count
State
-------------------------------------------------------------------------------
1/2 0 (0.00%) clear 0
3/2 133 (88.66%) raised 18
===============================================================================
*A:7750# show application-assurance group 1 dns-ip-cache "Default DNS IP Cache" isa 3/1
===============================================================================
Application Assurance Group 1 dns-ip-cache "Default DNS IP Cache" ISA 3/1
===============================================================================
Admin Status : Up
Domain expressions : 11 (out of 32)
Server addresses : 0 (out of 64)
High watermark : 40%
Low watermark : 35%
Cache size : 5000
-------------------------------------------------------------------------------
ISA 3/1 DNS Stats
-------------------------------------------------------------------------------
DNS
Total responses : 5751
Domain name matched : 106
Domain & server matched : 106
Cache
Total entries added : 118
Total entries removed : 0
Usage : 118 (2.36%) threshold alarm clear
Full count : 0
Hit count : 274
Miss count : 20379
===============================================================================
dns-ip-cache
Syntax
dns-ip-cache dns-ip-cache-name url file-url
dns-ip-cache dns-ip-cache-name isa mda-id/esa-vm-id [url file-url] [new-ip-count]
Context
[Tree] (tools>dump>app-assure>group dns-ip-cache)
Full Context
tools dump application-assurance group dns-ip-cache
Description
This command displays the list of IP addresses stored in a DNS IP cache.
Parameters
- dns-ip-cache-name
-
Specifies a DNS IP cache name, up to 32 characters.
- url file-url
-
Specifies the URL for the file to direct the search output to. The file may be local or remote.
- isa mda-id/esa-vm-id
-
Specifies the DNS IP cache for a particular ISA-AA card.
- new-ip-count
-
Displays the number of new IP addresses added to the cache.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following are output examples for this command.
Sample Output*A:7750# tools dump application-assurance group 1 dns-ip-cache "Default DNS IP Cache"
isa 3/2
=====================================================
Application-Assurance dns-ip-cache "Default DNS IP Cache"
Current Time: "01/21/2015 16:44:00" (UTC)
group: 1
isa: 3/2
admin state: no shutdown
max-entries: 150
=====================================================
ip-address creationTime(UTC) lastUpdated(sec)
numDNSResponses lastMatchTime(UTC) numTimesMatched
2001:db8:3d40:3::3fa8:3d59 "01/21/2015 16:42:49" 71 5
"01/21/2015 16:42:49" 0
2001:db8:3d40:3::3fa8:3d0b "01/21/2015 16:42:49" 71 1
"01/21/2015 16:42:49" 0
2001:db7:3d40:3::3fa8:3d2b "01/21/2015 16:42:49" 71 1
"01/21/2015 16:42:49" 0
192.168.74.203 "01/21/2015 16:42:36" 84 67
"01/21/2015 16:42:36" 0
192.168.124.91 "01/21/2015 16:42:36" 84 15
"01/21/2015 16:42:36" 0
192.168.124.97 "01/21/2015 16:42:36" 84 15
"01/21/2015 16:42:36" 0
192.168.86.136 "01/21/2015 16:42:36" 84 5
"01/21/2015 16:42:36" 0
192.168.74.176 "01/21/2015 16:42:36" 84 67
"01/21/2015 16:42:36" 0
192.168.86.99 "01/21/2015 16:42:36" 84 11
"01/21/2015 16:42:36" 0
>/tools dump application-assurance group 1 dns-ip-cache "Default DNS IP Cache" isa 5/2 new-ip-count
=====================================================
Application-Assurance dns-ip-cache "Default DNS IP Cache"
Current Time: "08/06/2020 15:16:50" (UTC)
group: 1
isa: 5/2
admin state: no shutdown
num-domains: 2
=====================================================
domain hostname new-ip-count
"Tango" "*.tango.me$" 37
"Google" "*.google.*" 6
=====================================================
|
Label |
Description |
|---|---|
|
ip-address |
Indicates the IP address stored in the DNS IP cache. The address is added into the cache if the DNS response meets the DNS IP cache match criteria (domain name and DNS server address). |
|
creationTime |
Indicates the time at which the entry was created. The entry is created by a DNS response meeting the DNS IP cache match criteria (domain name and DNS server address). |
|
lastUpdated(UTC) |
Indicates the time at which the entry was last updated, either from a new IP flow (fully classified) using the same IP address or a new DNS response meeting the DNS IP cache match criteria. |
|
numDNSResponses |
Indicates the number of DNS responses including this IP address meeting the DNS IP cache match criteria. |
|
lastMatchTime(UTC) |
Indicates the last time the IP address matched an app-filter with a server address DNS IP cache criteria. |
|
numTimesMatched |
Indicates the number of times the IP address matched an app-filter with a server address DNS IP cache. |
|
domain |
Indicates the domain as configured in dns-ip-cache. |
|
hostname |
Indicates the hostname as configured in dns-ip-cache. |
|
new-ip-count |
Indicates the number of new IP addresses added in the cache for the domain. |
domain
domain
Syntax
domain [md-index] [association ma-index | all-associations [detail]]
Context
[Tree] (show>eth-cfm domain)
Full Context
show eth-cfm domain
Description
This command displays domain information.
Parameters
- md-index
-
Specifies the Maintenance Domain (MD) index value.
- ma-index
-
Specifies the Maintenance Association (MA) index value.
- all-associations
-
Displays information all maintenance associations.
- detail
-
Displays detailed information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following are examples of ETH-CFM domain information. The following table describes the output fields.
Sample Output*A:node-1# show eth-cfm domain
===============================================================================
CFM Domain Table
===============================================================================
Md-index Level Name Format
-------------------------------------------------------------------------------
10 0 InfrastructureL0 CharString
12 2 none
13 3 none
14 4 none
15 5 none
===============================================================================
*A:node-1# show eth-cfm domain
==============================================================================
eth-cfm CFM Domain Table
==============================================================================
Md-index Level Name Format
------------------------------------------------------------------------------
1 4 test-1 charString
7 4 AA:BB:CC:DD:EE:FF-0 macAddressAndUint
==============================================================================
*A:node-1#
*A:node-1# show eth-cfm domain 1 detail
===============================================================================
Domain 1
Md-index : 1 Level : 4
Permission : sendIdNone MHF Creation : defMHFnone
Name Format : charString Next Ma Index : 3
Name : test-1
===============================================================================
*A:node-1#
|
Label |
Description |
|---|---|
|
Md-index |
Displays the Maintenance Domain (MD) index value. |
|
Level |
Displays an integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single bridges or physical links. |
|
Name |
Displays a generic Maintenance Domain (MD) name. |
|
Format |
Displays the type of the Maintenance Domain (MD) name. Values include dns, mac, and string. |
domain
Syntax
domain [domain-name]
Context
[Tree] (show>router>firewall domain)
Full Context
show router firewall domain
Description
This command lists an overview of all firewall domains that are provisioned in the routing instance.
Configuring the domain-name parameter will display operational details for the specified firewall domain.
Parameters
- domain-name
-
Specifies the name of a firewall domain, up to 32 characters maximum.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of firewall domain information.
Sample OutputNode# show router 4 firewall domain
===============================================================================
Firewall domains
===============================================================================
Domain NAT-group Admin-state
-------------------------------------------------------------------------------
demo_domain_01 1 in-service
domain_slaac_4 1 in-service
-------------------------------------------------------------------------------
No. of firewall domains: 2
===============================================================================
Node# show router 4 firewall domain "domain_slaac_4"
===============================================================================
Firewall domain "domain_slaac_4"
===============================================================================
ISA group : 1
Administrative state : in-service
Last management change : 01/23/2017 10:47:24
===============================================================================
===============================================================================
Firewall domain prefixes
===============================================================================
Prefix Description
-------------------------------------------------------------------------------
2001:db8:5ffe::/32 (Not Specified)
-------------------------------------------------------------------------------
No. of prefixes: 1
===============================================================================
domain
Syntax
domain ipsec-domain-id [now] auto
domain ipsec-domain-id [now] to router-id
Context
[Tree] (tools>perform>redundancy>multi-chassis>mc-ipsec>force-switchover domain)
Full Context
tools perform redundancy multi-chassis mc-ipsec force-switchover domain
Description
This command triggers an IPsec N:M switchover for the specified IPsec domain.
Parameters
- ipsec-domain-id
-
Specifies the multi-chassis IPsec domain value.
- now
-
Specifies to switchover without confirmation.
- auto
-
Automatically elects a new active node, excluding the current active node.
- to router-id
-
Specifies the router ID of the new active node.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
dot1x
dot1x
Syntax
dot1x
Context
[Tree] (show>system>security dot1x)
Full Context
show system security dot1x
Description
This command displays IEEE 802.1X authentication information.
Platforms
All
downgrade
downgrade
Syntax
downgrade target-version target [reboot]
Context
[Tree] (tools>perform>persistence downgrade)
Full Context
tools perform persistence downgrade
Description
This command downgrades persistence files to a previous version.
Parameters
- target
-
Specifies the downgrade version.
- reboot
-
Specifies to reboot the system after a successful conversion.
Platforms
All
drain
drain
Syntax
[no] drain
Context
[Tree] (tools>perform>router>l2tp>group drain)
Full Context
tools perform router l2tp group drain
Description
This command triggers an attempt to drain a specified L2TP tunnel group.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
drain
Syntax
[no] drain
Context
[Tree] (tools>perform>router>l2tp>tunnel drain)
[Tree] (tools>perform>router>l2tp>group>tunnel drain)
Full Context
tools perform router l2tp tunnel drain
tools perform router l2tp group tunnel drain
Description
This command triggers an attempt to drain a specified L2TP tunnel.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
drain
Syntax
[no] drain
Context
[Tree] (tools>perform>router>l2tp>peer drain)
Full Context
tools perform router l2tp peer drain
Description
This command triggers an attempt to drain a specified L2TP peer.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
ds-lite-b4
ds-lite-b4
Syntax
dscp-table [value dscp-value]
Context
[Tree] (show>subscr-mgmt>vrgw>brg>gateway ds-lite-b4)
Full Context
show subscriber-mgmt vrgw brg gateway ds-lite-b4
Description
This command displays the DS-Lite B4 services of a gateway.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
dscp-map
dscp-map
Syntax
dscp-map [dscp-name]
Context
[Tree] (show>router>sgt-qos dscp-map)
Full Context
show router sgt-qos dscp-map
Description
This command displays DSCP to FC mappings.
Parameters
- dscp-name
-
Specifies the DSCP name.
Platforms
All
Output
The following output is an example of DSCP mapping information.
Sample OutputA:ALA-A# show router sgt-qos dscp-map
===============================================================================
DSCP to FC Mappings
===============================================================================
DSCP Value FC Value Default FC Value
-------------------------------------------------------------------------------
be nc nc
cp1 be be
cp2 be be
cp3 be be
cp4 be be
cp5 be be
cp6 be be
cp7 be be
cs1 be be
cp9 be be
af11 af af
cp11 be be
af12 af af
cp13 be be
af13 af af
cp15 be be
cs2 be be
cp17 be be
af21 l1 l1
cp19 be be
af22 l1 l1
cp21 be be
af23 l1 l1
cp23 be be
cs3 be be
cp25 be be
af31 l1 l1
cp27 be be
af32 l1 l1
cp29 be be
af33 l1 l1
cp31 be be
cs4 be be
cp33 be be
af41 nc nc
cp35 be be
af42 h2 h2
cp37 be be
af43 h2 h2
cp39 be be
cs5 be be
cp41 be be
cp42 be be
cp43 be be
cp44 be be
cp45 be be
ef ef ef
cp47 be be
nc1 nc nc
cp49 be be
cp50 h2 h2
cp51 be be
cp52 be be
cp53 be be
cp54 be be
cp55 be be
nc2 nc nc
cp57 be be
cp58 be be
cp59 be be
cp60 be be
cp61 be be
cp62 be be
cp63 be be
===============================================================================
A:ALA-A#
dscp-table
dscp-table
Syntax
dscp-table [value dscp-value]
Context
[Tree] (show>qos dscp-table)
Full Context
show qos dscp-table
Description
This command displays the DSCP name-to-DSCP value mappings.
Parameters
- value dscp-value
-
The specific DSCP value for which to display information.
Platforms
All
Output
The following output is an example of dscp-table information, and Show QoS DSCP Table Output Fields describes the output fields.
Sample OutputA:ALA-48# show qos dscp-table
===========================================================
DSCP Mapping
===========================================================
DSCP Name DSCP Value TOS (bin) TOS (hex)
-----------------------------------------------------------
be 0 0000 0000 00
cp1 1 0000 0100 04
cp2 2 0000 1000 08
cp3 3 0000 1100 0C
cp4 4 0001 0000 10
cp5 5 0001 0100 14
cp6 6 0001 1000 18
cp7 7 0001 1100 1C
cs1 8 0010 0000 20
cp9 9 0010 0100 24
af11 10 0010 1000 28
cp11 11 0010 1100 2C
af12 12 0011 0000 30
cp13 13 0011 0100 34
af13 14 0011 1000 38
cp15 15 0011 1100 3C
cs2 16 0100 0000 40
cp17 17 0100 0100 44
af21 18 0100 1000 48
cp19 19 0100 1100 4C
af22 20 0101 0000 50
cp21 21 0101 0100 54
af23 22 0101 1000 58
cp23 23 0101 1100 5C
cs3 24 0110 0000 60
cp25 25 0110 0100 64
af31 26 0110 1000 68
cp27 27 0110 1100 6C
af32 28 0111 0000 70
cp29 29 0111 0100 74
af33 30 0111 1000 78
cp31 31 0111 1100 7C
cs4 32 1000 0000 80
cp33 33 1000 0100 84
af41 34 1000 1000 88
cp35 35 1000 1100 8C
af42 36 1001 0000 90
cp37 37 1001 0100 94
af43 38 1001 1000 98
cp39 39 1001 1100 9C
cs5 40 1010 0000 A0
cp41 41 1010 0100 A4
cp42 42 1010 1000 A8
cp43 43 1010 1100 AC
cp44 44 1011 0000 B0
cp45 45 1011 0100 B4
ef 46 1011 1000 B8
cp47 47 1011 1100 BC
nc1 48 1100 0000 C0
cp49 49 1100 0100 C4
cp50 50 1100 1000 C8
cp51 51 1100 1100 CC
cp52 52 1101 0000 D0
cp53 53 1101 0100 D4
cp54 54 1101 1000 D8
cp55 55 1101 1100 DC
nc2 56 1110 0000 E0
cp57 57 1110 0100 E4
cp58 58 1110 1000 E8
cp59 59 1110 1100 EC
cp60 60 1111 0000 F0
cp61 61 1111 0100 F4
cp62 62 1111 1000 F8
cp63 63 1111 1100 FC
===========================================================
A:ALA-48#
A:ALA-48# show qos dscp-table value 46
===========================================================
DSCP Mapping
===========================================================
DSCP Name DSCP Value TOS (bin) TOS (hex)
-----------------------------------------------------------
ef 46 1011 1000 B8
===========================================================
A:ALA-48#
|
Label |
Description |
|---|---|
|
DSCP Name |
Displays the name of the DiffServ code point to be associated with the forwarding class. |
|
DSCP Value |
Displays the DSCP values, between 0 and 63. |
|
TOS (bin) |
Displays the type of service in binary format. |
|
TOS (hex) |
Displays the type of service in hex format. |
dslite-lsn-sub
dslite-lsn-sub
Syntax
dslite-lsn-sub router router-instance b4-address-prefix ipv6-prefix
Context
[Tree] (clear>nat dslite-lsn-sub)
Full Context
clear nat dslite-lsn-sub
Description
This command clears NAT mappings for Dual-Stack Lite (DS-Lite) LSN subscribers.
Parameters
- router-instance
-
Specifies the router instance, up to 32 characters.
- ipv6-prefix
-
Specifies the IPv6 prefix and length.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
dump
dump
Syntax
dump
Context
[Tree] (tools dump)
Full Context
tools dump
Description
Commands in this context display troubleshooting information.
Platforms
All
duplicate
duplicate
Syntax
duplicate [ip-address]
Context
[Tree] (clear>service>id>proxy-arp duplicate)
Full Context
clear service id proxy-arp duplicate
Description
This command clears proxy-ARP duplicate entries.
Parameters
- ip-address
-
Specifies the IP address.
Platforms
All
duplicate
Syntax
duplicate [ipv6-address]
Context
[Tree] (clear>service>id>proxy-nd duplicate)
Full Context
clear service id proxy-nd duplicate
Description
This command clears proxy-ND duplicate entries.
Parameters
- ipv6-address
-
Specifies the IPv6 address.
Platforms
All
dynamic
dynamic
Syntax
dynamic ip-address
Context
[Tree] (clear>service>id>proxy-arp dynamic)
Full Context
clear service id proxy-arp dynamic
Description
This command clears proxy-ARP dynamic entries.
Parameters
- ip-address
-
Specifies the IP address.
Platforms
All
dynamic
Syntax
dynamic ipv6-address
Context
[Tree] (clear>service>id>proxy-nd dynamic)
Full Context
clear service id proxy-nd dynamic
Description
This command clears proxy-ND dynamic entries.
Parameters
- ipv6-address
-
Specifies the IPv6 address.
Platforms
All
dynamic-blocks
dynamic-blocks
Syntax
dynamic-blocks subscriber sub-ident-string [nat-policy policy-name]
Context
[Tree] (tools>dump>nat>l2-aware dynamic-blocks)
Full Context
tools dump nat l2-aware dynamic-blocks
Description
This command displays information about dynamic blocks.
Parameters
- sub-ident-string
-
Specifies the subscriber identification string, up to 64 characters
- policy-name
-
Specifies the NAT policy name, up to 32 characters
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of dynamic block information, and Dynamic Blocks Field Descriptions describes the output fields.
Sample Output/tools dump nat l2-aware dynamic-blocks subscriber "dynblocks sub"
===============================================================================
Dynamic blocks
===============================================================================
NAT policy Router Outside IP Dynamic block
-------------------------------------------------------------------------------
dynblocks pol 101 40.101.200.5 1049 - 1058
1059 - 1068
|
Field |
Description |
|---|---|
|
NAT policy |
The NAT policy name |
|
Router |
The router number |
|
Outside IP |
The outside IP address |
|
Dynamic block |
The dynamic block range |
dynamic-resolve
dynamic-resolve
Syntax
dynamic-resolve all [force]
dynamic-resolve ip-address [force]
Context
[Tree] (tools>perform>service>id>proxy-arp dynamic-resolve)
Full Context
tools perform service id proxy-arp dynamic-resolve
Description
This command triggers the resolve procedure for dynamic IP entries. When executed, a resolve message (ARP-request) is issued for the requested IP or, if the all option used, for all the configured dynamic IPs.
The force option triggers the resolve process even for IPs with an existing entry in the proxy-ARP table.
Parameters
- ip-address
-
Specifies the IP address.
- all
-
Runs the command for all configured dynamic IPs.
- force
-
Issues a resolve message even when configured dynamic IP entries are present.
Platforms
All
dynamic-resolve
Syntax
dynamic-resolve all [force]
dynamic-resolve ipv6-address [force]
Context
[Tree] (tools>perform>service>id>proxy-nd dynamic-resolve)
Full Context
tools perform service id proxy-nd dynamic-resolve
Description
This command triggers the resolve procedure for dynamic IPv6 entries. When executed, a resolve message (Neighbor Solicitation) is issued for the requested IPv6 or, if the all option used, for all the configured dynamic IPv6s.The force option triggers the resolve process even for IPv6 addresses with an existing entry in the proxy-ARP table.
Parameters
- ipv6-address
-
Specifies the IPv4 or IPv6 address.
- all
-
Runs the command for all configured dynamic IPv6 addresses.
- force
-
Issues a resolve message even when configured dynamic IP entries are present.
Platforms
All
dynamic-services
dynamic-services
Syntax
dynamic-services
Context
[Tree] (show>service dynamic-services)
[Tree] (show>service>id dynamic-services)
Full Context
show service dynamic-services
show service id dynamic-services
Description
Commands in this context show dynamic services information.
These commands are not available in the MD-CLI.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
dynamic-services
Syntax
dynamic-services
Context
[Tree] (clear>service>id dynamic-services)
[Tree] (clear>service dynamic-services)
Full Context
clear service id dynamic-services
clear service dynamic-services
Description
Commands in this context clear dynamic services related data.
These commands are not available in the MD-CLI.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
dynamic-services
Syntax
dynamic-services
Context
[Tree] (clear>service>stats dynamic-services)
Full Context
clear service statistics dynamic-services
Description
This command resets the dynamic services script statistics. See also show service dynamic services script statistics.
This command is not available in the MD-CLI.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
dynamic-services
Syntax
dynamic-services command-list
Context
[Tree] (tools>dump>service dynamic-services)
Full Context
tools dump service dynamic-services
Description
This command displays the list of supported commands that can be used in dynamic service CLI scripts.
There are two types of CLI nodes in this list:
-
Pass through nodes: navigation is allowed but attributes creation or attribute changes are prohibited in this node.
-
Allowed nodes: navigation, attribute creation and attribute changes are allowed in this node.
These commands are not available in the MD-CLI.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
dynamic-services-policy
dynamic-services-policy
Syntax
dynamic-services-policy [policy-name]
Context
[Tree] (show>service>dynsvc dynamic-services-policy)
Full Context
show service dynamic-services dynamic-services-policy
Description
This command displays the dynamic services policy information.
This command is not available in the MD-CLI.
Parameters
- policy-name
-
specifies for which dynamic services policy the information is requested.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of dynamic service policy information.
Sample Output# show service dynamic-services dynamic-services-policy "dynsvc-policy-1"
===============================================================================
Dynamic Service Policies
===============================================================================
Dynamic Service Policy : dynsvc-policy-1
-------------------------------------------------------------------------------
cli-user : (Not Specified)
description : Dynamic Services Policy 1
script-policy : script-policy-5
sap-limit : 2000
Accounting instance 1
Stats type : volume-time
server policy : aaa-server-policy-1
Update interval (minutes) : 30
Update interval jitter : 180s
Accounting instance 2
Stats type : time
server policy : aaa-server-policy-2
Update interval (minutes) : 0
Update interval jitter : 10%
-------------------------------------------------------------------------------
No. of Services-policies: 1
===============================================================================
Dynamic Services Policy Field Descriptions describes the Dynamic Services policy fields.
|
Output Field |
Description |
|---|---|
|
dynsrv-policy-name |
The unique name of a dynamic services policy, up to 32 characters. |
|
cli-user |
The identifier name of the CLI user associated with this Dynamic Services policy. |
|
script-policy |
The identifier name of the script policy associated with this Dynamic Services policy. |
|
sap-limit |
The limit of the number of SAPs (Service Access Point) that can be created using this Dynamic Services policy. |
|
Stats type |
The value used to identify the type of accounting statistics gathered, either volume-time or time. |
|
server policy |
The identifier name of a RADIUS server policy to be used for accounting. |
|
update interval (minutes) |
The time interval between consecutive accounting updates when using this Dynamic Services policy. |
|
update interval jitter |
The amount of jitter to be applied on the update interval. |
|
No. of Services-policies |
The total number Dynamic Services policies. |