h Commands

handler

Syntax

handler [handler-name]

handler detail

Context

[Tree] (show>log>event-handling handler)

Full Context

show log event-handling handler

Description

Commands in this context display EHS handler information.

Parameters

handler-name: Specifies the name of a specific handler up to 32 characters in length.

detail: Keyword to list details of all handlers.

Platforms

All

Output

The following output is an example of handler information.

Handler Output Field Descriptions describes handler output fields.

Output Example

A:node1>show>log>event-handling# handler
===============================================================================
Event Handling System - Handler List
===============================================================================
Handler                         Admin   Oper    Description
Name                            State   State
-------------------------------------------------------------------------------
h-sample                        up      up
h-main                          up      up
h-backup                        down    down
===============================================================================

*A:7950 XRS-20# show log event-handling handler "h-sample"
===============================================================================
Event Handling System - Handlers
===============================================================================
===============================================================================
Handler          : h-sample
===============================================================================
Description      : (Not Specified)
Admin State      : up                                Oper State : up
-------------------------------------------------------------------------------
Handler Action-List Entry
-------------------------------------------------------------------------------
Entry-id         : 10
Description      : (Not Specified)
Admin State      : up                                Oper State : up
Script
  Policy Name    : sp-sample
  Policy Owner   : TiMOS CLI
Min Delay        : 0
Last Exec        : 05/24/2015 19:03:31
-------------------------------------------------------------------------------
Handler Action-List Entry Execution Statistics
  Enqueued       : 4
  Err Launch     : 0
  Err Adm Status : 0
Total            : 4
===============================================================================

Table 1. Handler Output Field Descriptions
Label	Description
Handler	The name of the handler.
Description	The handler description string.
Admin State	The administrative state of the handler.
Oper State	The operational state of the handler.
Handler Action-List Entry
Entry-id	The action-list entry identifier.
Description	The action-list entry description string.
Admin State	The administrative state of the action-list entry.
Policy Name	The name of the related script policy.
Policy Owner	The owner of the related script policy.
Last Exec	The timestamp of the last successful execution of the action-list entry.
Handler Action-List Entry Execution Statistics
Enqueued	The number of times the action-list entry was successfully passed on to the SR OS sub-system or module that will attempt to process and execute the action. For a script-policy entry, this indicates that the script request has been enqueued but does not necessarily indicate that the script has successfully launched or completed. For status and information about the script, use the show>system>script-control command.
Err Launch	The number of times the action-list entry was not successfully handed over to the next SR OS sub-system or module in the processing chain. This can be caused by a variety of conditions including a full script request input queue.
Err Adm Status	The number of times the action-list entry was not executed because the entry was administratively disabled.
Total	The total number of times that the action-list entry attempted execution.

handler

Syntax

handler event-handler-name

Context

[Tree] (clear>log>event-handling handler)

Full Context

clear log event-handling handler

Description

This command clears the counters in the show log event-handling handler handler-name output. It does affect the global or aggregate counters shown using the information command.

Parameters

handler-name: Specifies the name of the event handler, up to 32 characters in length.

Platforms

All

hash-control

Syntax

hash-control

Context

[Tree] (show>system>security hash-control)

Full Context

show system security hash-control

Description

Commands in this context display hash-control configuration information.

Platforms

All

hierarchy

Syntax

hierarchy [subscriber sub-ident-string]

Context

[Tree] (show>service>active-subscribers hierarchy)

Full Context

show service active-subscribers hierarchy

Description

This command displays active subscriber hierarchy information. To display an IPoE/PPP session, the group of hosts within the session is visually indented. Additional information related to the session is also shown. For PPPoE, the circuit ID and remote ID if used is shown. For IPoE, the key used to group the session is shown (for example, the circuit ID). The command also display PD host which are modeled as a managed route. The PD managed route is directly underneath and points to the host that it is using as the next hop. The PD managed route forwarding status is also shown, where (N) indicates that the route is not forwarding.

Parameters

sub-ident-string: Specifies the subscriber ID of the active subscriber, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of active subscriber hierarchy information.

Output Example

*A:eng-BNG-2# show  service active-subscribers hierarchy
===============================================================================
Active Subscribers Hierarchy
===============================================================================
-- user_1
   (no-prof)
   |
   +-- sap:1/1/20:841 - sla:no-prof
       |
       +-- IPOE-session - mac:00:00:10:10:12:13 - svc:1000
           |
           +-- 192.168.0.13 - DHCP
-------------------------------------------------------------------------------
Number of active subscribers : 1
Flags: (N) = the host or the managed route is in non-forwarding state
===============================================================================

B:Dut-C# show service active-subscribers hierarchy 
===============================================================================
Active Subscribers Hierarchy
===============================================================================
-- basic1
   (sub__S1)
   |
   |-- sap:1/1/2:51 - sla:slaS2S1
   |   |
   |   +-- 3fe0:0:0:10::/64 - mac:10:00:00:00:01:10 - DHCP6 - svc:10
   |
   +-- sap:1/1/2:113 - sla:sla17S1 PPP session:23
       |
       +-- PPP-session - mac:10:00:00:00:01:91 - sid:1 - svc:10
           |
           |-- 10.1.0.111 - IPCP
           |
           +-- 3fe1:0:0:11::/64 - SLAAC
-------------------------------------------------------------------------------
Number of active subscribers : 1
Flags: (N) = the host or the managed route is in non-forwarding state
===============================================================================
*B:Dut-C#

*A:eng-BNG-2# show  service active-subscribers hierarchy radius-acct
===============================================================================
Active Subscribers Hierarchy (accounting information)
===============================================================================
-- user_1
   (no-prof)
   |
   +-- sap:1/1/20:841 - sla:no-prof
       |   |
       |   +-- no radius acct
       |       session-id          : D854FF0000000B5DF40326
       |
       +-- IPOE-Session - mac:00:00:10:10:12:13
           |   |
           |   +-- no radius acct
           |       session-id      : D854FF000000095DF40326
           |
           +-- 192.168.0.13
               |
               +-- no radius acct
                   session-id      : D854FF0000000A5DF40326
-------------------------------------------------------------------------------
Number of active subscribers : 1
===============================================================================

histogram

Syntax

histogram router router-instance pool pool-name bucket-size [1..65536] num-buckets [2..50]

Context

[Tree] (tools>dump>nat histogram)

Full Context

tools dump nat histogram

Description

This command displays a NAT pool port usage histogram

Parameters

router router-instance: Specifies the router instance.

pool pool-name: Specifies the identification of the NAT pool.

bucket-size [1..65536]: Specifies the unit of the X-axis of the histogram; a value of ten, for example, would return in a histogram with results for [0-9], [10-19], [20-29], ... ports.

num-buckets [2..50]: Specifies the size of the histogram; a value of five, for example, would result in five results: [0-9], [10-19], [20-29], [30-39], [40-infinite].

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

host

Syntax

host [detail] [wholesaler service-id] [ session {none | ipoe | ppp}] [ router-advertisement-policy policy-name]

host interface interface-name [detail] [ wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]

host mac ieee-address [detail] [ wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]

host ipv6-address ipv6-prefix [detail] [ wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]

host sap sap-id [detail] [ wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]

Context

[Tree] (show>service>id>slaac host)

Full Context

show service id slaac host

Description

This command displays SLAAC host related information.

Parameters

detail: Specifies to display detailed SLAAC host related information.

service-id

Specifies the service ID of the wholesaler.

Values: 1 to 2147483647

session

Specifies to display information about SLAAC hosts that are associated with an IPoE session or a PPP session.

Values: none, ipoe, ppp

interface-name: Specifies the interface name, up to 32 characters.

ieee-address: Specifies the MAC address for which to display SLAAC host information.

ipv6-address: Specifies the IPv6 address for which to display SLAAC host information.

sap-id: Specifies the physical port identifier portion of the SAP definition.

policy-name: Specifies the name of the router advertisement policy.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of detailed SLAAC host information.

Output Example

*A:eng-BNG-2# show service id 1000 slaac host detail
===============================================================================
SLAAC hosts for service 1000
===============================================================================
Service ID           : 1000
Prefix               : 2001:1000:bad:beef::/64
Interface Id         : N/A
Mac Address          : 00:00:10:10:12:12
Subscriber-interface : sub-int-01
Group-interface      : grp-int-01
SAP                  : 1/1/20:841
Termination Type     : local
Creation Time        : 2017/02/13 22:05:03
Persistence Key      : N/A
Router adv. policy   : ra-policy-01
IPoE|PPP session     : No
Radius sub-if prefix : N/A
IPoE Trigger         : rtr-solicit
Last Auth Time       : 2017/02/13 22:05:03
Inactivity Timer     : N/A
Sub-Ident            : "host-1"
Sub-Profile-String   : "no-prof"
SLA-Profile-String   : "no-prof"
App-Profile-String   : ""
ANCP-String          : ""
Int Dest Id          : ""
Category-Map-Name    : ""
Info origin          : radius
Pool                 : ""
Primary-Dns          : N/A
Secondary-Dns        : N/A
Circuit Id           : N/A
Remote Id            : N/A

Subscriber Host Limit Overrides
 ipv4-arp            : 1
 ipv4-dhcp           : 1
 ipv4-ppp            : 1
 ipv4-overall        : 1
 ipv6-pd-ipoe-dhcp   : 1
 ipv6-pd-ppp-dhcp    : 1
 ipv6-pd-overall     : 1
 ipv6-wan-ipoe-dhcp  : 1
 ipv6-wan-ipoe-slaac : 1
 ipv6-wan-ppp-dhcp   : 1
 ipv6-wan-ppp-slaac  : 1
 ipv6-wan-overall    : 1
 ipv6-overall        : 1
 lac-overall         : 1
 overall             : 1
SLA Profile Instance Host Limit Overrides
 ipv4-arp            : 1
 ipv4-dhcp           : 1
 ipv4-ppp            : 1
 ipv4-overall        : 1
 ipv6-pd-ipoe-dhcp   : 1
 ipv6-pd-ppp-dhcp    : 1
 ipv6-pd-overall     : 1
 ipv6-wan-ipoe-dhcp  : 1
 ipv6-wan-ipoe-slaac : 1
 ipv6-wan-ppp-dhcp   : 1
 ipv6-wan-ppp-slaac  : 1
 ipv6-wan-overall    : 1
 ipv6-overall        : 1
 lac-overall         : 1
 overall             : 1
Subscriber Session Limit Overrides
 ipoe                : 1
 pppoe-local         : 1
 pppoe-lac           : 1
 pppoe-overall       : 1
 l2tp-lns            : 1
 l2tp-lts            : 1
 l2tp-overall        : 1
 overall             : 1
SLA Profile Instance Session Limit Overrides
 ipoe                : 1
 pppoe-local         : 1
 pppoe-lac           : 1
 pppoe-overall       : 1
 l2tp-lns            : 1
 l2tp-lts            : 1
 l2tp-overall        : 1
 overall             : 1
-------------------------------------------------------------------------------
Number of hosts : 1
===============================================================================

*A:Dut-A# show service id 13 slaac host router-advertisement-policy ra-policy-01
===============================================================================
SLAAC hosts for service 13
===============================================================================
Prefix                      Mac Address          Sap Id                MC-Stdby
  IntId                                                                
-------------------------------------------------------------------------------
2013:bad:beef:1::/64        00:00:00:00:00:13    1/1/1:13              
  N/A
2013:bad:beef:2::/64        00:00:00:00:00:14    1/1/1:13              
  N/A
2013:bad:beef:3::/64        00:00:00:00:00:15    1/1/1:13              
  N/A
-------------------------------------------------------------------------------
Number of hosts : 3
===============================================================================
*A:Dut-A#

Service SLAAC Host Field Descriptions describes service SLAAC host information.

Table 2. Service SLAAC Host Field Descriptions
Field	Description
Service ID	The service identifier.
Prefix	The prefix for the service
Interface Id	The interface identifier of this SLAAC host. If the SLAAC host has multiple addresses, this field will only show the interface identifier of one of them.
Mac Address	The MAC address of the this SLAAC host
Subscriber-interface	The subscriber interface name
Group-interface	The subscriber interface group interface name
SAP	The service SAP ID
Termination Type	The termination type of this SLAAC host
Creation Time	The date and time the service was created
Persistence Key	The key value that can be used to track this SLAAC host in the persistence file.
Router adv. policy	The name of the router advertisement policy associated with the SLAAC host during authentication
IPoE\|PPP session	The indication if this SLAAC host belongs to an IPoE or PPP session
Radius sub-if prefix	The subscriber interface prefix that is received from a Radius server
IPoE Trigger	The trigger name
Last Auth Time	The sysUpTime at the time of the last authentication for this session
Inactivity Timer	The remaining time in seconds before the host is removed. A value of 0 indicates no inactivity timer is active.
Sub-Ident	The name of the subscriber identification policy
Sub-Profile-String	The name of the subscriber profile
SLA-Profile-String	The name of the SLA profile
App-Profile-String	The application profile string
ANCP-String	The ANCP string applicable for this session
Int Dest ID	The intermediate destination identifier applicable for this session
Category-Map-Name	The category map name applicable for this session
Info origin	The server that provided the Sub-profile, SLA profile, Ancp string and Intermediate Destination Id
Pool	the DHCP server pool from which the SLAAC prefix is allocated
Primary-Dns	the primary DNS server
Secondary-Dns	the secondary DNS server
Circuit ID	circuit ID of this host
Remote ID	remote ID of this host
Subscriber Host Limit Overrides and SLA Profile Instance Host Limit Overrides: (only shown when overrides are active)
ipv4-arp	The total number of IPv4 ARP hosts limit
ipv4-dhcp	The total number of IPv4 DHCP hosts limit
ipv4-ppp	The total number of IPv4 PPP hosts limit
ipv4-overall	The total number of IPv4 hosts limit
ipv6-pd-ipoe-dhcp	The total number of IPv6 IPoE DHCP Prefix Delegation hosts (IA-PD) limit
ipv6-pd-ppp-dhcp	The total number of IPv6 PPPoE DHCP Prefix Delegation hosts (IA-PD) limit
ipv6-pd-overall	The total number of IPv6 DHCP Prefix Delegation hosts (IA-PD) limit
ipv6-wan-ipoe-dhcp	The total number of IPv6 IPoE DHCP WAN hosts (IA-NA) limit
ipv6-wan-ipoe-slaac	The total number of IPv6 IPoE SLAAC WAN hosts limit
ipv6-wan-ppp-dhcp	The total number of IPv6 PPPoE DHCP WAN hosts (IA-NA) limit
ipv6-wan-ppp-slaac	The total number of IPv6 PPPoE SLAAC WAN hosts limit
ipv6-wan-overall	The total number of IPv6 WAN hosts limit
ipv6-overall	The total number of IPv6 hosts limit
lac-overall	The total number of L2TP LAC hosts limit
overall	The total number of subscriber hosts limit
Subscriber Session Limit Overrides and SLA Profile Instance Session Limit Overrides: (only shown when overrides are active)
ipoe	The total number of IPoE sessions limit
ppoe-local	The total number of PPPoE local terminated sessions (PTA) limit
ppoe-lac	The total number of PPPoE L2TP LAC sessions limit
ppoe-overall	The total number of PPPoE sessions limit
l2tp-lns	The total number of L2TP LNS sessions limit
l2tp-lts	The total number of L2TP LTS sessions limit
l2tp-overall	The total number of L2TP sessions limit
overall	The total number of subscriber sessions limit
Number of hosts	The total number of hosts matching the search criteria
MC-Stdby	The number of SAPs defined on this service on a port which is in multi-chassis standby mode

host

Syntax

host [sap sap-id] [wholesaler service-id] [port port-id] [inter-dest-id intermediate-destination-id] [detail]

host [sap sap-id] [wholesaler service-id] [port port-id] no-inter-dest-id [detail]

host summary

host [detail] wholesaler service-id (VPRN only)

Context

[Tree] (show>service>id host)

Full Context

show service id host

Description

This command displays static host information configured on this service.

Parameters

sap-id: Displays SAP information for the specified SAP ID.

intermediate-destination-id: Specifies the intermediate destination identifier which is encoded in the identification strings up to 32 characters.

summary: Displays summary host information.

wholesaler service-id

Specifies the VPRN service ID of the wholesaler. When specified in this context, SAP, SDP, interface, IP address and MAC parameters are ignored.

Values


service-id:	1 to 2147483647
svc-name:	64 characters maximum

Platforms

All

host

Syntax

host mac ieee-address ip ip-address

Context

[Tree] (show>subscr-mgmt>vrgw>brg>gateway host)

Full Context

show subscriber-mgmt vrgw brg gateway host

Description

This command lists pool information about a specific host in the BRG.

Parameters

ieee-address: Specifies the MAC address identifying a specific host.

ip-address: Displays only the prefixes associated with this host.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

host

Syntax

host [ipv6-address]

Context

[Tree] (show>router>mld>statistics host)

Full Context

show router mld statistics host

Description

This command displays MLD host statistics information.

Parameters

ipv6-address: Displays information associated with the specified IPv6 address.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

host

Syntax

host all

host ipv6-address ipv6-prefix

host mac ieee-address

host sap sap-id

Context

[Tree] (clear>service>id>slaac host)

Full Context

clear service id slaac host

Description

This command clears SLAAC host data.

Parameters

ieee-address: Specifies the MAC address.

ipv6-prefix: Specifies the IPv6 prefix and length.

sap-id: Specifies the SAP ID.

all: Clears all SLAAC host data.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

host

Syntax

host [ip-address]

Context

[Tree] (show>router>igmp>statistics host)

Full Context

show router igmp statistics host

Description

This command displays IGMP statistics for hosts.

Parameters

ip-address

Specifies the host IP address.

Values: a.b.c.d

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

host-connectivity-verify

Syntax

host-connectivity-verify statistics [sap sap-id]

Context

[Tree] (show>service>id host-connectivity-verify)

Full Context

show service id host-connectivity-verify

Description

This command displays host connectivity check statistics.

Parameters

statistics: Displays host connectivity verification data

sap-id: Specifies the physical port identifier portion of the SAP definition

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of service host connectivity information.

Output Example

A:ALA-48>show>service>id# host-connectivity-verify statistics sap 1/1/9:0
==============================================================================
Host connectivity check statistics
==============================================================================
Svc   SapId/          DestIp          Last                   Time        Oper
Id    SdpId           Address         Response               Expired     State
------------------------------------------------------------------------------
10001/2/3:01.144.145.1                                   Up
==============================================================================
A:ALA-48>show>service>id#

Show Service Id Host Connectivity Verify Fields describes show service-id host connectivity verification output fields.

Table 3. Show Service Id Host Connectivity Verify Fields
Label	Description
Svc Id	The service identifier.
SapId/SdpId	The SAP and SDP identifiers.
DestIp Address	The destination IP address.
Last Response	The time when the last response was received.
Time Expired	Displays whether the interval value has expired.
Oper State	Displays the current operational state of the service.

host-lockout-policy

Syntax

host-lockout-policy [policy host-lockout-policy-name] lockout-state

host-lockout-policy sap sap-id [circuit-id circuit-id] [macieee-address] [remote-id remote-id] [lockout-state]

Context

[Tree] (clear>subscr-mgmt host-lockout-policy)

Full Context

clear subscriber-mgmt host-lockout-policy

Description

This command removes host lockout contexts from the system.

Parameters

sap-id

Specifies to clear information for hosts in a specific lockout state.

Values


null	port-id \| bundle-id \| bpgrp-id \| lag-id \| aps-id \| eth-sat-id
dot1q	port-id \| bundle-id \| bpgrp-id \| lag-id \| aps-id \| pw-id \| eth-sat-id:[qtag1 \| cp-conn-prof-id]
qinq	port-id \| bundle-id \| bpgrp-id \| lag-id \| pw-id \| eth-sat-id:[qtag1 cp-conn-prof-id].[qtag2 \| cp-conn-prof-id]
	cp	keyword
	conn-prof-id	1 to 8000
cem	slot/mda/port.channel
ima-grp	bundle-id [:vpi/vci \| vpi \| vpi1.vpi2 \| cp.conn-prof-id]
	cp	keyword
	conn-prof-id	1 to 8000
port-id	slot/mda/port[.channel]
aps-id	aps-group-id[.channel]
	aps	keyword
	group-id	1 to 128
eth-tunnel	eth-tunnel-id[:eth-tun-sap-id]
	id	1 to 1024
	eth-tun-sap-id	0 to 4094
lag-id	lag-id \| lag-string
	lag	keyword
	id	1 to 800
	string	23 characters max
pw-id	pw-id
	pw	keyword
	id	1 to 32767
qtag1	null \| 0 to 4094
qtag2	* \| null \| 0 to 4094
tunnel-id	tunnel-id.private \| public:tag
	tunnel	keyword
	id	1 to 16
	tag	0 to 4094
eth-sat-id	esat-id/slot/port
	esat	keyword
	id	1 to 20
pxc-id	pxc-id.sub-port
	pxc	keyword
	id	1 to 64
	sub-port	a, b

circuit-id: Specifies the circuit ID, up to 253 characters.

ieee-address: Specifies the MAC address, up to 30 characters.

remote-id: Specifies the remote ID, up to 253 characters.

lockout-state: Specifies to clear information for hosts in a specific lockout state.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

host-lockout-policy

Syntax

host-lockout-policy

host-lockout-policy policy-name association

host-lockout-policy policy-name

host-lockout-policy policy-name lockout-state sap sap-id [summary]

host-lockout-policy policy-name lockout-state [circuit-id circuit-id] [sap sap-id] [summary]

host-lockout-policy policy-name lockout-state [mac ieee-address] [sap sap-id] [ summary]

host-lockout-policy policy-name lockout-state [remote-id remote-id] [ sap sap-id] [summary]

Context

[Tree] (show>subscr-mgmt host-lockout-policy)

Full Context

show subscriber-mgmt host-lockout-policy

Description

This command displays host lockout policy information.

Parameters

policy-name: Specifies a specific subscriber host lockout policy name up to 32 characters.

association: Specifies to display the association of the host lockout policy.

lockout-state

Specifies to display information for hosts in a specific lockout state.

Values: all, active, graceful

sap sap-id: Specifies to display SAP ID information.

circuit-id circuit-id: Specifies to display circuit ID information. The circuit-id is up to 256 characters .

mac ieee-address: Specifies to display MAC address information up to 30 characters.

remote-id remote-id: Specifies to display remote ID information, up to 256 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of subscriber management host lockout policy information.

Output Example

*A:cses-E11# show subscriber-mgmt host-lockout-policy
===============================================================================
Host Lockout Policies
===============================================================================
Lockout Policy                   Last Mgmt Change
  Lockout Time Min                 Lockout Time Max
Description
  Lockout Reset Time               Max Lockout Hosts
-------------------------------------------------------------------------------
test                             04/20/2012 19:51:02
  10                               3600
test
  60                               100
===============================================================================
*A:cses-E11# 


*A:cses-E11# show subscriber-mgmt host-lockout-policy "test"
===============================================================================
Host Lockout Policy "test"
===============================================================================
Description                        test
Last Mgmt Change                   04/20/2012 19:51:02
Lockout time min                   10
Lockout time max                   3600
Lockout reset time                 60
Max lockout hosts                  100
Host key                           all
===============================================================================
*A:cses-E11#

Host Lockout Policy Field Descriptions describes subscriber management host lockout policy output fields.

Table 4. Host Lockout Policy Field Descriptions
Field	Description
Lockout Policy	The subscriber Host Lockout Policy name
Last Mgmt Change	The sysUpTime at the time of the most recent management-initiated change to this policy
Lockout Time Min	The minimum lockout-time for this host lockout policy
Lockout Time Max	The maximum lockout-time for this host lockout policy
Description	The user-provided description of this subscriber Host Lockout Policy
Max Lockout Hosts	The maximum number of lockouts for this host
Last Mgmt Change	The sysUpTime at the time of the most recent management-initiated change to this policy
Lockout time min	The minimum lockout-time for this Host Lockout Policy
Lockout time max	The maximum lockout-time for this Host Lockout Policy
Lockout reset time	The lockout reset time for this Host Lockout Policy
Max lockout hosts	The maximum number of locked out hosts for this Host Lockout Policy
Host key	The method for host matching

host-lookup

Syntax

host-lookup [mac ieee-address] [ remote-id remote-id-ascii] [sap-id sap-id] [service-id service-id] [string vso-string] [system-id system-id] [option60 option-60-ascii] [circuit-id circuit-id-ascii] [ circuit-id-hex circuit-id-hex] [option60-hex option60-hex] [remote-id-hex remote-id-hex] [derived-id derived-id] [ ip-prefix ip-prefix/ip-prefix-length]

Context

[Tree] (tools>perform>subscr-mgmt>loc-user-db>ipoe host-lookup)

Full Context

tools perform subscriber-mgmt local-user-db ipoe host-lookup

Description

This command performs a lookup in the local user database. This command looks up the host with the match-list configured in the local user database.

Parameters

ieee-address: Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.

remote-id: Specifies the information which goes into the remote-id sub-option in the DHCP relay packet, up to 255 characters.

sap-id: Specifies a SAP identifier to be used.

service-id

Specifies an existing subscriber service ID.

Values: 1 to 2147483647

vso-string: Specifies a Vendor Specific Option (VSO) string.

system-id

Specifies the system ID.

Values: up to 255 characters maximum

hex-string

Specifies the content of option 60 for this lookup.

Values: 0x0 to 0xFFFFFFFF (maximum 64 hex nibbles)

circuit-id: Specifies the circuit ID from the Option 82.

circuit-id-hex

Specifies the circuit ID in hexadecimal format from the Option 82.

Values: 0x0 to 0xFFFFFFFF (maximum 254 hex nibbles)

sap-id: Specifies a SAP ID, up to 255 characters maximum.

option-60-ascii: Specifies the Vendor-Identifying Vendor Option to match against. Option 60 is encoded as Type - Length - Value and must be formatted in ASCII.

option-60-hex: Specifies the Vendor-Identifying Vendor Option to match against. Option 60 is encoded as Type - Length - Value and must be formatted in HEX.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

host-lookup

Syntax

host-lookup [circuit-id circuit-id] [circuit-id-hex circuit-id-hex] [derived-id derived-id] [mac ieee-address] [remote-id remote-id] [remote-id-hex remote-id-hex] [sap-id sap-id] [service-name service-name] [user-name user-name]

Context

[Tree] (tools>perform>subscr-mgmt>loc-user-db>ppp host-lookup)

Full Context

tools perform subscriber-mgmt local-user-db ppp host-lookup

Description

This command performs a lookup in the local user database.

Parameters

ieee-address: Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.

remote-id: Specifies the information that goes into the remote-id sub-option in the DHCP relay packet, up to 255 characters.

user-name: Specifies a user name, up to 128 characters.

service-name: Specifies a PPP service name, up to 255 characters.

circuit-id: Specifies the circuit ID from the Option 82.

circuit-id-hex

Specifies the circuit ID in hexadecimal format from the Option 82.

Values: 0x0 to 0xFFFFFFFF (maximum 254 hex nibbles)

derived-id derived-id: Specifies an ASCII string that uniquely identifies a host and is derived by a Python script from packet content available during a DHCP transaction.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

Use the following command for an example of PPP host lookup information.

tools perform subscriber-mgmt local-user-db "ludb-1" ppp host-lookup user-name user-1@best.net

===============================================================================
PPP host Lookup results
===============================================================================
Result               : Success
Matched Host Name    : default
Admin State          : Up
Last Mgmt Change     : 02/22/2023 09:58:51

Host Identification
 Mac Address         : N/A
 Circuit Id          : N/A
 Remote Id           : N/A
 Sap Id              : N/A
 Service Name        : N/A
 User Name           : N/A
 Encap Tag Range     : N/A
 Encap Tag Sep Range : N/A
 Derived Id          : N/A

Matched Objects      : N/A

Address              : N/A
Password Type        : N/A
PADO Delay           : 0msec
Pre Auth Policy      : N/A
Auth Policy          : radius-auth-1
Padi Auth Policy     : N/A
Diameter app policy  : (Not Specified)
Diameter auth policy : (Not Specified)
Acct Policy          : N/A
Dupl Acct Policy     : N/A
User DB              : N/A
Rip Policy           : N/A
Router Advert Policy : N/A
Retailer Svc Id      : N/A
Service              : N/A
Interface            : N/A
Force IPv6CP         : Disabled
IPv6 Address         : N/A
IPv6 Del Pfx         : N/A
IPv6 Slaac Pfx       : N/A
IPv6 Address Pool    : N/A
IPv6 Del Pfx Pool    : N/A
IPv6 Slaac Pfx Pool  : N/A
IPv6 Del Pfx Length  : N/A
Ignore DF Bit        : Disabled

DHCPv6 lease times
 Renew timer         : > 9999 days
 Rebind timer        : > 9999 days
 Preferred lifetime  : 0d 00:00:00
 Valid lifetime      : 0d 00:00:00

Identification Strings
 Subscriber Id       : N/A
 SLA Profile String  : N/A
 SPI Sharing Group Id: N/A
 Sub Profile String  : N/A
 App Profile String  : N/A
 ANCP String         : N/A
 Inter Destination Id: N/A
 Category Map Name   : N/A

L2TP
 Service             : N/A
 Tunnel Group        : N/A
 LAC Steering Profile: N/A

MSAP defaults
 Policy              : N/A
 Service             : N/A
 Group Interface     : N/A
 Group Interface Pfx : none
 Group Interface Sfx : none

Filter Overrules
 Ing Ipv4 Fltr       : N/A
 Egr Ipv4 Fltr       : N/A
 Ing Ipv6 Fltr       : N/A
 Egr Ipv6 Fltr       : N/A

Access loop info
 Circuit ID format   : none
 Circuit ID          : N/A
 Remote ID format    : none
 Remote ID           : N/A

PPP policy parameters
 Max sessions per mac: N/A
 Keepalive           : N/A
===============================================================================

host-lookup

Syntax

host-lookup [circuit-id circuit-id] [circuit-id-hex circuit-id-hex] [derived-id derived-id] [mac ieee-address] [remote-id remote-id] [remote-id-hex remote-id-hex] [sap-id sap-id] [service-name service-name] [user-name user-name]

Context

[Tree] (tools>perform>subscr-mgmt>loc-user-db>ppp host-lookup)

Full Context

tools perform subscriber-mgmt local-user-db ppp host-lookup

Description

This command performs a lookup in the local user database.

Parameters

circuit-id circuit-id: Specifies the circuit ID from the Option 82.

circuit-id-hex

Specifies the circuit ID in hexadecimal format from the Option 82.

Values: 0x0 to 0xFFFFFFFF (maximum 254 hex nibbles)

derived-id: Specifies an ASCII string that uniquely identifies a host, and is derived by a Python script from packet content available during a DHCP transaction.

remote-id: Specifies that information that goes into the remote-id sub-option in the DHCP relay packet, up to 255 characters.

remote-id-hex

Specifies the remote ID in hexadecimal format.

Values: 0x0 to 0xFFFFFFFF (maximum 510hex nibbles)

sap-id: Specifies a SAP ID, up to 255 characters.

service-name: Specifies a PPP service name up to 253 characters.

user-name: Specifies a user name up to 128 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

host-tracking

Syntax

host-tracking [subscriber sub-ident-string]

host-tracking [subscriber sub-ident-string] detail

host-tracking [subscriber sub-ident-string] summary

host-tracking [subscriber sub-ident-string] statistics

Context

[Tree] (show>service>active-subscribers host-tracking)

Full Context

show service active-subscribers host-tracking

Description

This command displays active subscriber host tracking information.

Parameters

sub-ident-string: Displays subscriber ID of the active subscriber, up to 32 characters.

detail: Displays detailed host tracking information for the specified subscriber ID.

summary: Displays summarized host tracking information for the specified subscriber ID.

statistics: Displays statistical host tracking information for the specified subscriber ID.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

host-tracking

Syntax

host-tracking [statistics]

host-tracking sap sap-id [host ip-address] [statistics]

Context

[Tree] (clear>service>id host-tracking)

Full Context

clear service id host-tracking

Description

This command clears host tracking data.

Parameters

sap-id: Specifies a SAP for which to clear host tracking data.

ip-address

Specifies the IP address of a host for which to clear tracking data.

Values: a.b.c.d

statistics: Clears statistics.

Platforms

All

host-tracking

Syntax

host-tracking

Context

[Tree] (clear>subscr-mgmt host-tracking)

Full Context

clear subscriber-mgmt host-tracking

Description

Commands in this context clear host tracking data.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

host-tracking-policy

Syntax

host-tracking-policy

host-tracking-policy policy-name association

host-tracking-policy policy-name

Context

[Tree] (show>subscr-mgmt host-tracking-policy)

Full Context

show subscriber-mgmt host-tracking-policy

Description

This command displays host tracking policy information.

Parameters

policy-name: Specifies the host tracking policy name, up to 32 characters.

association: Displays information associated with the host tracking policy.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

hostname

Syntax

hostname

Context

[Tree] (show>service>id>spb hostname)

Full Context

show service id spb hostname

Description

This command displays SPB system-id to hostname mapping.

Platforms

All

Output

The following output is an example of service SPB hostname information.

Output Example

*A:Dut-A# show service id 100001 spb hostname
===============================================================================
Hosts
===============================================================================
System Id                Hostname
-------------------------------------------------------------------------------
0000.00AA.AAAA           cses-B02
0000.00BB.BBBB           cses-B07
===============================================================================

hostname

Syntax

hostname

Context

[Tree] (show>router>isis hostname)

Full Context

show router isis hostname

Description

This command displays the hostname database. There are no options or parameters.

Platforms

All

Output

IS-IS Hostname Output

IS-IS Hostname Output Fields describes output fields for IS-IS hostname output.

Table 5. IS-IS Hostname Output Fields
Label	Description
System-id	System identifier mapped to hostname.
Hostname	Hostname for the specific system-id.
Type	The type of entry (static or dynamic).

Output Example

A:ALA-A# show router isis hostname
=========================================================================
Rtr Base ISIS Instance 0 Hostnames
=========================================================================
System Id                Hostname
-------------------------------------------------------------------------
1800.0000.0002           core_west
1800.0000.0005           core_east
1800.0000.0008           asbr_west
1800.0000.0009           asbr_east
1800.0000.0010           abr_sjc
1800.0000.0011           abr_lax
1800.0000.0012           abr_nyc
1800.0000.0013           abr_dfw
1800.0000.0015           dist_oak
1800.0000.0018           dist_nj
1800.0000.0020           acc_nj
1800.0000.0021           acc_ri
1800.0000.0027           dist_arl
1800.0000.0028           dist_msq
1800.0000.0029           acc_arl
1800.0000.0030           acc_msq
=========================================================================
A:ALA-A#

hostname

Syntax

hostname

Context

[Tree] (show>router>ospf3 hostname)

[Tree] (show>router>ospf hostname)

Full Context

show router ospf3 hostname

show router ospf hostname

Description

This command displays information about the hostname database.

Platforms

All

Output

The following output is an example of OSPF hostname database information. Host Output Fields displays field descriptions.

Table 6. Host Output Fields
Label	Description
Nbr Rtr Id	The OSPF ID.
hostname	The OSPF hostname.
No. of OSPF RTR id/hostnames	The total number of OSPF router IDs and hostnames.

Output Example

*A:router-B# show router ospf hostname
====================================
Rtr Base OSPFv2 Instance 0 hostnames
====================================
Nbr Rtr Id      hostname            
--------------------------------
10.20.0.3       router-A         
10.20.1.3       router-B 
10.20.2.3         -   
10.20.3.3       router-D        
--------------------------------
No. of OSPF Rtr id/hostnames: 4

hosts

Syntax

hosts [group grp-address] [detail] [ fwd-service service-id] [grp-interface ip-int-name]

hosts [host ip-address] [group grp-address] [detail]

hosts summary

Context

[Tree] (show>router>igmp hosts)

Full Context

show router igmp hosts

Description

This command displays IGMP hosts information.

Parameters

grp-address: Specifies the group IP address.

service-id

Specifies the service ID.

Values

service-id: 1 to 2148278386

svc-name: up to 64 characters.

ip-int-name: Specifies an IP interface name, up to 32 characters.

ip-address: Specifies an IP address.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of IGMP host information.

Output Example

*B:Dut-C# show router igmp hosts 
===============================================================================
IGMP Hosts
===============================================================================
Host            Oper    Oper    Fwd   GrpItf            Num    Subscriber      
                State   Version Svc                     Groups                 
-------------------------------------------------------------------------------
239.112.1.1     Up      3       1     gi_1_1            1      sub_1           
239.112.1.2     Up      3       1     gi_1_1            2      sub_1           
239.112.1.3     Up      3       1     gi_1_2            0      sub_2           
-------------------------------------------------------------------------------
Hosts : 3
===============================================================================
*B:Dut-C# 

*B:Dut-C# show router igmp hosts detail 
===============================================================================
IGMP Host 239.112.1.1
===============================================================================
Oper Status      : Up         MacAddress     : 00:00:00:00:00:01
Oper version     : 3          Subscriber     : sub_1
Num Groups       : 1          GrpItf         : gi_1_1
Max Grps Till Now: 2          IGMP-Policy    : pol1
PPPoE SessionId  : 1          Next query time: 0d 00:02:03
FwdSvcId         : 1                                                            
-------------------------------------------------------------------------------
IGMP Group
-------------------------------------------------------------------------------
Group Address    : 239.0.0.1      Up Time    : 0d 00:00:24
Expires          : Not running    Mode       : Include
V1 Host Timer    : Not running    Type       : Dynamic
V2 Host Timer    : Not running    Compat Mode: IGMP Version 3
Redir.vRtrId     : N/A            Redir.Intf : N/A
-----------------------------------------------------------
Source Address     Expires        Type         Fwd/Blk 
-----------------------------------------------------------
10.11.0.1          0d 00:03:56    Dynamic      Fwd        
10.11.0.2          0d 00:03:56    Dynamic      Fwd 
===============================================================================
IGMP Host 239.112.1.2
===============================================================================
Oper Status      : Up         MacAddress     : 00:00:00:00:00:01
Oper version     : 3          Subscriber     : sub_1
Num Groups       : 2          GrpItf         : gi_1_1
Max Grps Till Now: 2          IGMP-Policy    : pol1
PPPoE SessionId  : 2          Next query time: 0d 00:02:03
FwdSvcId         : 1                                                            
-------------------------------------------------------------------------------
IGMP Group
-------------------------------------------------------------------------------
Group Address    : 239.0.0.1      Up Time    : 0d 00:00:16
Expires          : 0d 00:04:05    Mode       : Exclude
V1 Host Timer    : Not running    Type       : Dynamic
V2 Host Timer    : Not running    Compat Mode: IGMP Version 3
Redir.vRtrId     : N/A            Redir.Intf : N/A
-----------------------------------------------------------
Source Address     Expires        Type         Fwd/Blk 
-----------------------------------------------------------
10.11.0.1          0d 00:00:00    Dynamic      Blk        
-------------------------------------------------------------------------------
IGMP Group
-------------------------------------------------------------------------------
Group Address    : 239.0.0.2      Up Time    : 0d 00:00:16
Expires          : 0d 00:04:04    Mode       : Exclude
V1 Host Timer    : Not running    Type       : Dynamic
V2 Host Timer    : Not running    Compat Mode: IGMP Version 3
Redir.vRtrId     : N/A            Redir.Intf : N/A
-----------------------------------------------------------
Source Address     Expires        Type         Fwd/Blk 
-----------------------------------------------------------
10.11.0.1          0d 00:00:00    Dynamic      Blk 
===============================================================================
IGMP Host 239.112.1.3
===============================================================================
Oper Status      : Up         MacAddress     : 00:00:00:00:00:02
Oper version     : 3          Subscriber     : sub_2
Num Groups       : 0          GrpItf         : gi_1_2
Max Grps Till Now: 1          IGMP-Policy    : pol1
PPPoE SessionId  : 1          Next query time: 0d 00:00:48
FwdSvcId         : 1                                                            
-------------------------------------------------------------------------------
Hosts : 3                             
===============================================================================
*B:Dut-C# 

*B:Dut-C# show router igmp statistics host 239.112.1.1 
==================================================
IGMP Host Statistics 239.112.1.1
==================================================
Message Type        Received       Transmitted                                 
--------------------------------------------------
Queries             0              580           
Report V1           0              0             
Report V2           0              0             
Report V3           5              0             
Leaves              0              0             
-------------------------------------------------------------------------------
General Host Statistics
-------------------------------------------------------------------------------
Bad Length        : 0
Bad Checksum      : 0
Unknown Type      : 0
Bad Receive If    : 0
Rx Non Local      : 0
Rx Wrong Version  : 0
Policy Drops      : 0
No Router Alert   : 0
Rx Bad Encodings  : 0                 
Local Scope Pkts  : 0
Resvd Scope Pkts  : 0
MCAC Policy Drops : 0
-------------------------------------------------------------------------------
Source Group Statistics
-------------------------------------------------------------------------------
(S,G)             : 0
(*,G)             : 0
==================================================
*B:Dut-C# show subscriber-mgmt igmp-policy

hosts

Syntax

hosts

Context

[Tree] (show>subscr-mgmt>vrgw>brg>gateway hosts)

Full Context

show subscriber-mgmt vrgw brg gateway hosts

Description

This command lists all the hosts connected to the BRG.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of BRG gateway host information.

Output Example

Node# show subscriber-mgmt brg gateway brg-id "00:00:00:00:00:05" hosts
===============================================================================
Bridged Residential Gateway hosts
===============================================================================
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:19
IP address                   : 21.0.0.20
Service                      : 4 (VPRN)
Allocation type              : dynamic
Home-aware pool              : 00:00:00:00:00:05
DHCP lease                   : true
Remaining lease time         : 388
Lease start time             : 2016/01/18 17:44:44
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:19
IP address                   : 3ffe:0:0:5::
Service                      : 4 (VPRN)
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:1a
IP address                   : 21.0.0.21
Service                      : 4 (VPRN)
Allocation type              : dynamic
Home-aware pool              : 00:00:00:00:00:05
DHCP lease                   : true
Remaining lease time         : 392
Lease start time             : 2016/01/18 17:44:48
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:1a
IP address                   : 3ffe:0:0:5::
Service                      : 4 (VPRN)
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:1b
IP address                   : 21.0.0.22
Service                      : 4 (VPRN)
Allocation type              : dynamic
Home-aware pool              : 00:00:00:00:00:05
DHCP lease                   : true
Remaining lease time         : 396
Lease start time             : 2016/01/18 17:44:52
-------------------------------------------------------------------------------
No. of BRG hosts: 5
===============================================================================

hosts

Syntax

hosts [detail] [fwd-service service-id] [ grp-interface ip-int-name]

hosts [host ipv6-address] [group grp-ipv6-address] [detail]

hosts summary

Context

[Tree] (show>router>mld hosts)

Full Context

show router mld hosts

Description

This command shows MLD hosts information.

Parameters

grp-ipv6-address: Specifies the group IPv6 address.

service-id

Specifies the service ID.

Values

service-id: 1 to 2148278386

svc-name: up to 64 characters.

ip-int-name: Specifies the IP interface name, up to 32 characters.

ipv6-address: Specifies the IPv6 address.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of MLD host information.

Output Example

A:Dut-C# show router mld hosts
==============================================================================
MLD Hosts
==============================================================================
Host                                          Subscriber
   Oper-State Oper-Ver Fwd-Svc Num-Groups Group-Interface
------------------------------------------------------------------------------
192:168:9::1                                  oli_1
   Up         2        1       0               grp-1-2-1
192:168:9::2                                  oli_1
   Up         2        1       0               grp-1-2-1
------------------------------------------------------------------------------
Hosts : 2
==============================================================================
A:Dut-C#

A:Dut-C# show router mld hosts detail
===============================================================================
MLD Host 192:168:9::1
===============================================================================
Oper Status      : Up         MacAddress     : 00:00:11:00:00:01
Oper Version     : 2          Subscriber     : oli_1
NumGrps          : 0          GrpItf         : grp-1-2-1
MaxGrps Till Now : 0          MLD Policy     : oli1
PPPoE SessionId  : N/A        Next Query Time: 0d 00:00:06
FwdSvcId         : 1          MaxSrcs Allowed: No Limit
MaxGrps Allowed  : No Limit   MaxGrpSrcs All*: No Limit
Qry Interval     : 125        Qry Last Lstnr*: 1
Qry Resp Interval: 10         Router Alert C*: Enabled
Bonding Conn Idx : 0          Bonding Id     : None
===============================================================================
MLD Host 192:168:9::2
===============================================================================
Oper Status      : Up         MacAddress     : 00:00:11:00:00:02
Oper Version     : 2          Subscriber     : oli_1
NumGrps          : 0          GrpItf         : grp-1-2-1
MaxGrps Till Now : 0          MLD Policy     : oli1
PPPoE SessionId  : N/A        Next Query Time: 0d 00:00:06
FwdSvcId         : 1          MaxSrcs Allowed: No Limit
MaxGrps Allowed  : No Limit   MaxGrpSrcs All*: No Limit
Qry Interval     : 125        Qry Last Lstnr*: 1
Qry Resp Interval: 10         Router Alert C*: Enabled
Bonding Conn Idx : 0          Bonding Id     : None
-------------------------------------------------------------------------------
Hosts : 2
===============================================================================
* indicates that the corresponding row element may have been truncated.
A:Dut-C#

hosts-logging-out

Syntax

hosts-logging-out [portal name] [ host ip-address] [circuit-id circuit-id] [remote-id remote-id] [sap sap-id] [mac ieee-address] [session] [all-portals] [all-hosts] [all-sessions]

Context

[Tree] (clear>router>wpp hosts-logging-out)

Full Context

clear router wpp hosts-logging-out

Description

This command clears WPP hosts that are logging out.

Parameters

name: Specifies the portal name, up to 32 characters.

ip-address

Specifies the IP address.

Values: a.b.c.d

circuit-id: Specifies the circuit ID, up to 256 characters.

remote-id: Specifies the remote ID, up to 256 characters.

sap-id: Specifies the SAP ID.

ieee-address: Specifies the MAC address, up to 30 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

hs-attachment-policy

Syntax

hs-attachment-policy [policy-name] [association | detail]

Context

[Tree] (show>qos hs-attachment-policy)

Full Context

show qos hs-attachment-policy

Description

This command displays information about HS attachment policies in the system.

Parameters

policy-name: Displays information about the specified policy name, up to 32 characters.

association: Displays the entities associated with all HS attachment policies or the specified HS attachment policy.

detail: Displays detailed policy information, including policy associations, of all HS attachment policies, or the specified HS attachment policy.

Platforms

7750 SR-7/12/12e

Output

The following output is an example of HS attachment policy information.

Output Example

*A:PE# show qos hs-attachment-policy "default"

===============================================================================
HS Attachment Policy Information
===============================================================================
Policy Name             : default
Description             : Default hs attachment QoS policy
Low Burst Max Class     : 6

-------------------------------------------------------------------------------
Queue               Scheduling Class              WRR Group
-------------------------------------------------------------------------------
1                   (Not-Applicable)              1
2                   (Not-Applicable)              1
3                   (Not-Applicable)              1
4                   2                             (Not-Applicable)
5                   3                             (Not-Applicable)
6                   4                             (Not-Applicable)
7                   5                             (Not-Applicable)
8                   6                             (Not-Applicable)

-------------------------------------------------------------------------------
WRR Group           Scheduling Class
-------------------------------------------------------------------------------
1                   1
2                   unattached
===============================================================================

*A:PE# show qos hs-attachment-policy "hs-att-pol-1" detail

===============================================================================
HS Attachment Policy Information
===============================================================================
Policy Name             : hs-att-pol-1
Description             : (Not Specified)
Low Burst Max Class     : 1

-------------------------------------------------------------------------------
Queue               Scheduling Class              WRR Group
-------------------------------------------------------------------------------
1                   (Not-Applicable)              1
2                   (Not-Applicable)              1
3                   unattached                    unattached
4                   unattached                    unattached
5                   unattached                    unattached
6                   4                             (Not-Applicable)
7                   5                             (Not-Applicable)
8                   6                             (Not-Applicable)

-------------------------------------------------------------------------------
WRR Group           Scheduling Class
-------------------------------------------------------------------------------
1                   1
2                   unattached

-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Network-Queue Policy
-------------------------------------------------------------------------------
10

Sap-Egress Policy
-------------------------------------------------------------------------------
10
20

Egress Queue-Group Templates
-------------------------------------------------------------------------------
queue-group-1

-------------------------------------------------------------------------------
===============================================================================
*A:PE#

hs-pool-policy

Syntax

hs-pool-policy [policy-name] [association | detail]

Context

[Tree] (show>qos hs-pool-policy)

Full Context

show qos hs-pool-policy

Description

This command displays information about HS pool policies in the system.

Parameters

policy-name: Displays information about the specified HS pool policy name, up to 32 characters.

association: Displays the entities associated with all HS pool policies or the specified HS pool policy.

detail: Displays detailed policy information, including policy associations, of all HS pool policies or the specified HS pool policy.

Platforms

7750 SR-7/12/12e

Output

The following output is an example of HS pool policy information.

Output Example

*A:PE# show qos hs-pool-policy

===============================================================================
HS Pool Policy Summary
===============================================================================
Policy Name              Description
-------------------------------------------------------------------------------
default                  Default hs pool QoS policy
hs-pool-pol-1            (Not Specified)
-------------------------------------------------------------------------------
No. of Policies: 2
===============================================================================

*A:PE# show qos hs-pool-policy default detail

===============================================================================
HS Pool Policy Information
===============================================================================
Policy Name             : default
Description             : Default hs pool QoS policy
System Reserve          : 5.00

-------------------------------------------------------------------------------
Root Pool Information
-------------------------------------------------------------------------------
Pool Id                 : 1             Allocation Weight   : 75
Slope Policy            : _tmnx_hs_default
Pool Id                 : 2             Allocation Weight   : 25
Slope Policy            : _tmnx_hs_default
Pool Id                 : 3             Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 4             Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 5             Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 6             Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 7             Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 8             Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 9             Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 10            Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 11            Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 12            Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 13            Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 14            Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 15            Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 16            Allocation Weight   : 0
Slope Policy            : _tmnx_hs_default

-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Mid Pool Information
-------------------------------------------------------------------------------
Pool Id                 : 1             Allocation Percent  : 40.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 1
Slope Policy            : _tmnx_hs_default
Pool Id                 : 2             Allocation Percent  : 35.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 1
Slope Policy            : _tmnx_hs_default
Pool Id                 : 3             Allocation Percent  : 30.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 1
Slope Policy            : _tmnx_hs_default
Pool Id                 : 4             Allocation Percent  : 25.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 1
Slope Policy            : _tmnx_hs_default
Pool Id                 : 5             Allocation Percent  : 80.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 2
Slope Policy            : _tmnx_hs_default
Pool Id                 : 6             Allocation Percent  : 20.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 2
Slope Policy            : _tmnx_hs_default
Pool Id                 : 7             Allocation Percent  : 1.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 8             Allocation Percent  : 1.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 9             Allocation Percent  : 1.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 10            Allocation Percent  : 1.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 11            Allocation Percent  : 1.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 12            Allocation Percent  : 1.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 13            Allocation Percent  : 1.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 14            Allocation Percent  : 1.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 15            Allocation Percent  : 1.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 0
Slope Policy            : _tmnx_hs_default
Pool Id                 : 16            Allocation Percent  : 1.00
Port BW Oversub Factor  : 1             Parent Root Pool    : 0
Slope Policy            : _tmnx_hs_default

-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Card Forwarding Plane (FP) Associations
-------------------------------------------------------------------------------
Card                FP
-------------------------------------------------------------------------------
1                   1

-------------------------------------------------------------------------------
===============================================================================
*A:PE#

hs-pools

Syntax

hs-pools card-slot-number fp forwarding-plane egress

hs-pools port port-id egress

hs-pools port port-id egress network-queues

hs-pools port port-id egress queue-group queue-group-name [instance instance-id]

hs-pools port port-id egress sap sap-id

hs-pools port port-id egress subscriber sub-ident-string

Context

[Tree] (show hs-pools)

Full Context

show hs-pools

Description

This command shows the egress pool information relating to an HSQ IOM.

The card and fp output shows the total buffer allocation, the number of allocated buffers, the available buffer allocation, and the buffer high-water marks for the system pools and the hierarchy of user-provisioned root and mid pools on the specified card and FP. The output includes the applied slope policy and the related instantaneous slope drop probabilities (as a percentage) for the user-provisioned pools.

The port output adds the port class pool information to the above hierarchy of user-provisioned pools for the specified port. The queue information for network queues, queue group instances, SAPs, or subscribers on the specified port is included when the associated parameter is added.

Parameters

card-slot-number

Displays information for the specified card slot.

Values: Depending on the chassis model, IOM slots are numbered from 1 to 10.

forwarding-plane

Displays information for the specified forwarding plane.

Values: 1

port-id: Displays information about the specified physical port ID in the slot/mda/port format.

network-queues: Displays information about the egress network queues on the specified port.

queue-group-name: Displays information about the specified queue group name, up to 32 characters.

instance-id

Displays information about the specified queue group instance.

Values: 1 to 65535

sap-id: Displays information about the specified SAP, up to 64 characters, on the specified port.

sub-ident-string: Displays information about the specified subscriber, up to 64 characters, on the specified port.

Platforms

7750 SR-7/12/12e

Output

The following output is an example of HS pool information.

Output Example

*A:PE4# show hs-pools port 1/1/2 egress sap 1/1/2:1

===============================================================================
HS Pools Port Information
===============================================================================
Port               : 1/1/2

-------------------------------------------------------------------------------
System Pool Information
-------------------------------------------------------------------------------
Total Buffers      : 209412 KB          Allocated          : 0 KB
Available          : 209412 KB          High Water Mark    : 0 KB
-------------------------------------------------------------------------------
Buffer Pool Hierarchy Information
-------------------------------------------------------------------------------

Root Pool : 1
|  Total               : 2984148 KB  Allocated         : 0 KB
|  Available           : 2984148 KB  High Water Mark   : 0 KB
|  Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|  Excd-Slope Drop Prob: 0
|  Hs Slope Policy     : _tmnx_hs_default
|
|--- Mid Pool : 1
|     | Total               : 1193658 KB  Allocated         : 0 KB
|     | Available           : 1193658 KB  High Water Mark   : 0 KB
|     | Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|     | Excd-Slope Drop Prob: 0
|     | Hs Slope Policy     : _tmnx_hs_default
|     |
|     |--- Std Port Class Pool : 6
|     |      Total               : 596828 KB   Allocated         : 0 KB
|     |      Available           : 596828 KB   High Water Mark   : 0 KB
|     |      Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|     |      Excd-Slope Drop Prob: 0
|     |      Hs Slope Policy     : _tmnx_hs_default
|     |
|--- Mid Pool : 2
|     | Total               : 1044450 KB  Allocated         : 0 KB
|     | Available           : 1044450 KB  High Water Mark   : 0 KB
|     | Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|     | Excd-Slope Drop Prob: 0
|     | Hs Slope Policy     : _tmnx_hs_default
|     |
|     |--- Std Port Class Pool : 5
|     |      Total               : 522224 KB   Allocated         : 0 KB
|     |      Available           : 522224 KB   High Water Mark   : 0 KB
|     |      Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|     |      Excd-Slope Drop Prob: 0
|     |      Hs Slope Policy     : _tmnx_hs_default
|     |
|--- Mid Pool : 3
|     | Total               : 895244 KB   Allocated         : 0 KB
|     | Available           : 895244 KB   High Water Mark   : 0 KB
|     | Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|     | Excd-Slope Drop Prob: 0
|     | Hs Slope Policy     : _tmnx_hs_default
|     |
|     |--- Std Port Class Pool : 4
|     |      Total               : 447622 KB   Allocated         : 0 KB
|     |      Available           : 447622 KB   High Water Mark   : 0 KB
|     |      Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|     |      Excd-Slope Drop Prob: 0
|     |      Hs Slope Policy     : _tmnx_hs_default
|     |
|--- Mid Pool : 4
|     | Total               : 746036 KB   Allocated         : 0 KB
|     | Available           : 746036 KB   High Water Mark   : 0 KB
|     | Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|     | Excd-Slope Drop Prob: 0
|     | Hs Slope Policy     : _tmnx_hs_default
|     |
|     |--- Std Port Class Pool : 1
|     |      Total               : 373018 KB   Allocated         : 0 KB
|     |      Available           : 373018 KB   High Water Mark   : 0 KB
|     |      Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|     |      Excd-Slope Drop Prob: 0
|     |      Hs Slope Policy     : hs-slope-1
|     |
Root Pool : 2
|  Total               : 994716 KB   Allocated         : 0 KB
|  Available           : 994716 KB   High Water Mark   : 0 KB
|  Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|  Excd-Slope Drop Prob: 0
|  Hs Slope Policy     : _tmnx_hs_default
|
|--- Mid Pool : 5
|     | Total               : 795772 KB   Allocated         : 0 KB
|     | Available           : 795772 KB   High Water Mark   : 0 KB
|     | Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|     | Excd-Slope Drop Prob: 0
|     | Hs Slope Policy     : _tmnx_hs_default
|     |
|--- Mid Pool : 6
|     | Total               : 198942 KB   Allocated         : 0 KB
|     | Available           : 198942 KB   High Water Mark   : 0 KB
|     | Hi-Slope Drop Prob  : 0           Lo-Slope Drop Prob: 0
|     | Excd-Slope Drop Prob: 0
|     | Hs Slope Policy     : _tmnx_hs_default
|     |

-------------------------------------------------------------------------------
Queue Information
-------------------------------------------------------------------------------
Queue Name         : 1->1/1/2:1->1
FC Map             : be l2 l1 h2 nc
Admin PIR          : 40000              Oper PIR               : 0
Admin MBS          : 64 KB              Oper MBS               : 64 KB
HS Wrr Group       : 1
HS Wrr Class Weight: 1                  HS Wrr Weight          : 2
Depth              : 0
HS Class           : 1                  HS Alt Port Class Pool : No
HS Slope Policy    : _tmnx_hs_default
Queue Name         : 1->1/1/2:1->2
FC Map             : af
Admin PIR          : 40000              Oper PIR               : 0
Admin MBS          : 64 KB              Oper MBS               : 64 KB
HS Wrr Group       : 1
HS Wrr Class Weight: 1                  HS Wrr Weight          : 1
Depth              : 0
HS Class           : 1                  HS Alt Port Class Pool : No
HS Slope Policy    : _tmnx_hs_default
Queue Name         : 1->1/1/2:1->6
FC Map             : ef
Admin PIR          : 20000              Oper PIR               : 20000
Admin MBS          : 64 KB              Oper MBS               : 64 KB
HS Wrr Group       : (not-applicable)
HS Wrr Class Weight: 1                  HS Wrr Weight          : 0
Depth              : 0
HS Class           : 4                  HS Alt Port Class Pool : No
HS Slope Policy    : _tmnx_hs_default
Queue Name         : 1->1/1/2:1->7
FC Map             : h1
Admin PIR          : 10000              Oper PIR               : 10000
Admin MBS          : 64 KB              Oper MBS               : 64 KB
HS Wrr Group       : (not-applicable)
HS Wrr Class Weight: 1                  HS Wrr Weight          : 0
Depth              : 0
HS Class           : 5                  HS Alt Port Class Pool : No
HS Slope Policy    : _tmnx_hs_default

-------------------------------------------------------------------------------
===============================================================================

hs-port-pool-policy

Syntax

hs-port-pool-policy [policy-name] [association | detail]

Context

[Tree] (show>qos hs-port-pool-policy)

Full Context

show qos hs-port-pool-policy

Description

This command displays information about HS port pool policies in the system.

Parameters

policy-name: Displays information about the specified HS port pool policy name, up to 32 characters.

association: Displays the entities associated with all HS port pool policies or the specified HS port pool policy.

detail: Displays detailed policy information, including policy associations, of all HS port pool policies, or the specified HS port pool policy.

Platforms

7750 SR-7/12/12e

Output

The following output is an example of HS port pool policy information.

Output Example

*A:PE# show qos hs-port-pool-policy

===============================================================================
HS Port Pool Policy Summary
===============================================================================
Policy Name              Description
-------------------------------------------------------------------------------
default                  Default hs port pool QoS policy
no-class-pools           (Not Specified)
hs-port-pool-pol-1       (Not Specified)
-------------------------------------------------------------------------------
No. of Policies: 3
===============================================================================
*A:PE# show qos hs-port-pool-policy default detail

===============================================================================
HS Port Pool Policy Information
===============================================================================
Policy Name             : default
Description             : Default hs port pool QoS policy

-------------------------------------------------------------------------------
Standard Port Class Pool Information
-------------------------------------------------------------------------------
Class Id                : 1             Parent Mid Pool     : 1
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default
Class Id                : 2             Parent Mid Pool     : 2
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default
Class Id                : 3             Parent Mid Pool     : 3
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default
Class Id                : 4             Parent Mid Pool     : 4
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default
Class Id                : 5             Parent Mid Pool     : 5
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default
Class Id                : 6             Parent Mid Pool     : 6
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default

-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Alternate Port Class Pool Information
-------------------------------------------------------------------------------
Class Id                : 1             Parent Mid Pool     : 0
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default
Class Id                : 2             Parent Mid Pool     : 0
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default
Class Id                : 3             Parent Mid Pool     : 0
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default
Class Id                : 4             Parent Mid Pool     : 0
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default
Class Id                : 5             Parent Mid Pool     : 0
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default
Class Id                : 6             Parent Mid Pool     : 0
Alloc Port BW Weight    : 1             Alloc Explicit Prcnt: 0.00
Slope Policy            : _tmnx_hs_default

-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Port Ethernet Egress Associations
-------------------------------------------------------------------------------
1/2/1
-------------------------------------------------------------------------------
===============================================================================
*A:PE#

hs-scheduler-hierarchy

Syntax

hs-scheduler-hierarchy port port-id [hs-secondary-shaper shaper-name] [interval time-in-seconds]

hs-scheduler-hierarchy port port-id [interval time-in-seconds] hs-secondary-shapers

hs-scheduler-hierarchy port port-id [interval time-in-seconds] queue-group queue-group-name instance instance-id {access | network}

hs-scheduler-hierarchy sap sap-id egress [ interval time-in-seconds]

hs-scheduler-hierarchy subscriber sub-ident egress [ interval time-in-seconds]

Context

[Tree] (show>qos hs-scheduler-hierarchy)

Full Context

show qos hs-scheduler-hierarchy

Description

This command displays the egress HS scheduler hierarchy for the HS scheduler policy applied to the related port. The output includes the current maximum rate and each scheduling class rate on the port. The parameters allow for the current rates for the scheduling classes for all HS secondary shapers or a specific HS secondary shaper, or for the queue rates in a specified access or network queue group instance, SAP or subscriber to be included in the output.

Parameters

port-id: Specifies the physical port ID in the slot/mda/port format.

shaper-name: Displays information about the specified HS secondary name, up to 32 characters, and includes the scheduling class rates for the HS secondary shaper on the port.

time-in-seconds

Displays the time interval used to calculate the rates, in seconds.

Values: 1 to 5

hs-secondary-shapers: Displays information about scheduling class rates for all HS secondary shapers on the port.

queue-group-name: Displays information about the specified queue group name on the port, up to 32 characters.

instance-id

Displays information about the specified queue group instance.

Values: 1 to 65535

sap-id: Displays information about the queue rates for the specified SAP, up to 64 characters, on the specified port.

sub-ident: Displays information about the specified subscriber, up to 64 characters, on the specified port.

Platforms

7750 SR-7/12/12e

Output

The following output is an example of HS scheduler hierarchy information.

Output Example

*A:PE# show qos hs-scheduler-hierarchy port 1/1/1 hs-secondary-shaper "default"

===============================================================================
Hs Scheduler Hierarchy Information
===============================================================================
Hs Sched Policy Name         : hs-sched-pol-1

Port Max-Rate : 0 Mbps
Hs-Sec-Shaper:default Agg-Rate : 0 Kbps

Scheduler Priority 6
  Scheduler Class 6  Rate : 0 Mbps
    Hs-Sec-Shaper:default Class 6 Rate : 0 Kbps

Scheduler Priority 5
  Scheduler Class 5  Rate : 0 Mbps
    Hs-Sec-Shaper:default Class 5 Rate : 0 Kbps

Scheduler Priority 4
  Scheduler Class 4  Rate : 0 Mbps
    Hs-Sec-Shaper:default Class 4 Rate : 0 Kbps

Scheduler Priority 3
  Scheduler Class 3  Rate : 0 Mbps
    Hs-Sec-Shaper:default Class 3 Rate : 0 Kbps

Scheduler Priority 2
  Scheduler Class 2  Rate : 0 Mbps
    Hs-Sec-Shaper:default Class 2 Rate : 0 Kbps

Scheduler Priority 1
  Scheduler Class 1  Rate : 0 Mbps
    Hs-Sec-Shaper:default Class 1 Rate : 0 Kbps
===============================================================================
*A:PE# show qos hs-scheduler-hierarchy port 1/1/1 hs-secondary-shapers

===============================================================================
Hs Scheduler Hierarchy Information
===============================================================================
Hs Sched Policy Name         : hs-sched-pol-1

Port Max-Rate : 0 Mbps

Scheduler Priority 6
  Scheduler Class 6  Rate : 0 Mbps

Scheduler Priority 5
  Scheduler Class 5  Rate : 0 Mbps

Scheduler Priority 4
  Scheduler Class 4  Rate : 0 Mbps

Scheduler Priority 3
  Scheduler Class 3  Rate : 0 Mbps

Scheduler Priority 2
  Scheduler Class 2  Rate : 0 Mbps

Scheduler Priority 1
  Scheduler Class 1  Rate : 0 Mbps

-------------------------------------------------------------------------------
HS Secondary Shaper Rates
-------------------------------------------------------------------------------
Hs-Sec-Shaper:default Agg-Rate : 0 Kbps
        Class 6     Rate : 0 Kbps
        Class 5     Rate : 0 Kbps
        Class 4     Rate : 0 Kbps
        Class 3     Rate : 0 Kbps
        Class 2     Rate : 0 Kbps
        Class 1     Rate : 0 Kbps

-------------------------------------------------------------------------------
===============================================================================
*A:PE#

hs-scheduler-policy

Syntax

hs-scheduler-policy [policy-name] [association | detail]

Context

[Tree] (show>qos hs-scheduler-policy)

Full Context

show qos hs-scheduler-policy

Description

This command displays information about HS scheduler policies in the system.

Parameters

policy-name: Displays information about the specified HS scheduler policy name, up to 32 characters.

association: Displays the entities associated with all HS scheduler policies or the specified HS pool policy.

detail: Displays the policy information, including policy associations, of all HS scheduler policies or the specified HS scheduler policy.

Platforms

7750 SR-7/12/12e

Output

The following output is an example of HS scheduler policy information.

Output Example

*A:PE# show qos hs-scheduler-policy

===============================================================================
HS Scheduler Policy Summary
===============================================================================
Policy Name              Description
-------------------------------------------------------------------------------
default                  Default hs scheduler QoS policy
hs-sched-pol-1           (Not Specified)
-------------------------------------------------------------------------------
No. of Policies: 2
===============================================================================

*A:PE# show qos hs-scheduler-policy "default" detail

===============================================================================
HS Scheduler Policy Information
===============================================================================
Policy Name             : default
Description             : Default hs scheduler QoS policy
Max Rate                : max

-------------------------------------------------------------------------------
Scheduling Class    Rate                Group               Weight in Group
-------------------------------------------------------------------------------
1                   max                 0                   1
2                   max                 0                   1
3                   max                 0                   1
4                   max                 0                   1
5                   max                 0                   1
6                   max                 0                   1

-------------------------------------------------------------------------------
Group               Rate
-------------------------------------------------------------------------------
1                   max

-------------------------------------------------------------------------------
Port Ethernet Egress Associations

-------------------------------------------------------------------------------
1/1/2
1/1/3
1/1/4
1/1/5
1/1/6
1/1/7
1/1/8
1/1/9
1/1/10
1/2/1
-------------------------------------------------------------------------------
===============================================================================
*A:PE#

hs-secondary-shaper

Syntax

hs-secondary-shaper secondary-shaper-name [statistics | associations]

Context

[Tree] (show>port hs-secondary-shaper)

Full Context

show port hs-secondary-shaper

Description

This command displays port HS secondary shaper information.

Parameters

secondary-shaper-name: Specifies the secondary shaper name, up to 32 characters.

statistics: Displays the statistics related to the port HS secondary shaper.

association: Displays the associations related to the port HS secondary shaper.

Platforms

7750 SR-7/12/12e

http-client

Syntax

http-client any

http-client [ip-address/prefix-length]

http-client [ipv6-address/prefix-length]

Context

[Tree] (tools>dump>router>web-rd http-client)

Full Context

tools dump router web-rd http-client

Description

Commands in this context dump the HTTP client hash table.

Parameters

any: Specifies all HTTP clients.

ip-address/prefix-length

Dumps HTTP clients only matching the specified IP address and prefix length.

Values


ip-address:	a.b.c.d
prefix-length:	0 to 32

ipv6-address/prefix-length

Dumps HTTP clients only matching the specified IPv6 address and prefix length.

Values


ipv6-address:	x:x:x:x:x:x:x:x (eight 16-bit pieces)
	x:x:x:x:x:x:d.d.d.d
	x: [0 to FFFF]H
	d: [0 to 255]D
prefix-length:	0 to 128

Platforms

All

Output

The following output is an example of HTTP client information.

Output Example

*A:Dut-F#  tools dump router web-rd http-client any
 
===========================================================================
Webredirect HTTP Clients
===========================================================================
SvcId                      MAC Address          Connection Rate (conn/min)
        IP Address
---------------------------------------------------------------------------
31                         10:00:00:00:14:22    1
        7fe1:0:0:1::
31                         10:00:00:00:14:21    1
        30.0.0.2
---------------------------------------------------------------------------
No. of HTTP clients: 2/2
===========================================================================

http-enrich

Syntax

http-enrich

Context

[Tree] (show>app-assure http-enrich)

Full Context

show application-assurance http-enrich

Description

This command displays HTTP enrichment static definitions.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

http-enrich

Syntax

http-enrich enrichment-name

Context

[Tree] (show>app-assure>group http-enrich)

Full Context

show application-assurance group http-enrich

Description

This command displays HTTP enrichment information.

Parameters

enrichment-name: Specifies the name of the HTTP enrichment policy, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the output for the http-enrich command and Show HTTP Enrichment Output Fields describes the output fields.

Output Example HTTP Enrichment

show application-assurance group 1 http-enrich "MyTemplate"        
===============================================================================
Application Assurance Group 1 HTTP Enrichment "MyTemplate"
===============================================================================
Description   : (Not Specified)
Admin Status  : Up
AQP Referenced: No
 
-------------------------------------------------------------------------------
Name                        Field                       Enabled
                                                        Features
-------------------------------------------------------------------------------
subscriber-ip               MyField                     M
subscriber-id               Sub-ID                      AC
i msi                       I MSI 
msi sdn                     MSI SDN 
rat                         RAT
-------------------------------------------------------------------------------
                     A=anti-spoof,C=encode-cert,M=encode-md5,R=encode-rc4
----------------------------------------------------------------------
Group               Enriched                 Not Enriched
----------------------------------------------------------------------
1                   0                        0
----------------------------------------------------------------------
Total               0                        0
----------------------------------------------------------------------
===============================================================================

Table 7. Show HTTP Enrichment Output Fields
Label	Description
Description	HTTP header enrichment template description string
Admin Status	Administrative state of the HTTP header enrichment template
AQP Referenced	Referenced Application QoS Policy (AQP)
Name	Type of field with which HTTP traffic is enriched
Field	Header name that AA adds in the HTTP packet
Enabled features	Features configured for the specified field
Group	AA group to which the HTTP enrichment policy is applied
Enriched	Number of times the HTTP traffic for the specified AA group was enriched
Not Enriched	Number of times the HTTP traffic for the specified AA group was not enriched

http-error-redirect

Syntax

http-error-redirect redirect-name

Context

[Tree] (show>app-assure>group http-error-redirect)

Full Context

show application-assurance group http-error-redirect

Description

Commands in this context display http-error-redirect static definitions.

Parameters

redirect-name: Specifies the HTTP error redirect policy, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the policy command information.

Output Example

*A:cses-E11>show application-assurance group 1 http-error-redirect <redirect-name>
===============================================================================
Application-Assurance Group 1 http-error-redirect <redirect-name>
===============================================================================
description    : <description-string>
template       : <template-id>
               : text description of template
participant-id : <string>
http-host      : <http-host-name>
error code     : <http-error-code>    custom-msg-size : <msg size>
admin status   : Up
-------------------------------------------------------------------------------
Grp:Part  Error     Redirects    Redirects Not Sent
          Code      Sent         > Custom     Out ofFile    Error
                             size  Resourcetype
-------------------------------------------------------------------------------
1:1       404     1250          52            10           10
1:56789   404     2000          952           81           01
-------------------------------------------------------------------------------
Total               3250      1004          91           1     1
----------------------------------------------------------------
================================================================
*A:cses-E11>

http-error-redirect

Syntax

http-error-redirect

Context

[Tree] (show>app-assure http-error-redirect)

Full Context

show application-assurance http-error-redirect

Description

Commands in this context display HTTP error redirect static definitions.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

http-host-recorder

Syntax

http-host-recorder detail [isa mda-id/esa-vm-id] url file-url

http-host-recorder status [isa mda-id]

http-host-recorder top granularity [max-count max-count] [isa mda-id]

Context

[Tree] (tools>dump>app-assure>group http-host-recorder)

Full Context

tools dump application-assurance group http-host-recorder

Description

This command configures the dump of application-assurance http-host-recorder information. The http-host-recorder is configured using debug commands.

Parameters

detail: Saves the http host values recorded by the tool into a file.

status: .Displays the current status of the http-host-recorder with current-time, start-time, stop-time, sample-rates, filters, buffer as well as number of bytes and flows recorded for the specified AA ISA.

top: .Displays by bytes or flows the top values recorded by the tool.

isa mda-id /esa-vm-id

Specifies the AA ISA.

Values: slot 1 to 10, mda 1 to 2

url file-url

Specifies the URL for the file to direct the http-host-recorder output to.

Values


local-url:	<cflash-id>/][<file-path>]
	200 chars max, including cflash-id
	directory length 99 chars max each
remote-url:	[{ftp://\| tftp://}<login>:<pswd>@<remote-locn>/][<file-path>]
	255 chars max
	directory length 99 chars max each
remote-locn:	<hostname> \| <ipv4-address> \| <ipv6-address> ]
	ipv4-address	a.b.c.d
	ipv6-address	x:x:x:x:x:x:x:x[-interface]
		x:x:x:x:x:x:d.d.d.d[-interface]
		x - [0..FFFF]H
		d - [0..255]D
	interface	32 chars max, for link local addresses
	cflash-id	flash slot ID

granularity

Specifies if the output is sorted by bytes or flows.

Values: bytes, flows

max-count max-count

Specifies the maximum count of flows to display.

Values: 1 to 25

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

http-notification

Syntax

http-notification

Context

[Tree] (show>app-assure http-notification)

Full Context

show application-assurance http-notification

Description

This command displays HTTP notification static definitions.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

http-notification

Syntax

http-notification http-notification-name [summary]

Context

[Tree] (show>app-assure>group http-notification)

Full Context

show application-assurance group http-notification

Description

This command displays information about the configured http-notification policy with associated raw statistics:

Template: Template Id in use
Script URL: URL address of the script used in the notification message
Admin Status: Up / Down
AQP Referenced: Yes/No
Notified: Total number of notifications sent
Notification criteria selection not matched: Number of HTTP request not matching the selection criteria for in browser notification

Parameters

http-notification-name: Displays the name of the http-notification policy.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the http-notification command information.

Output Example

A:7750# show application-assurance group 1 http-notification "in-browser-notification"
===============================================================================
Application Assurance Group 1 HTTP Notification "in-browser-notification"
===============================================================================
Description  : IBN Demo ALU Message
Template     : 1 - Javascript-url with subId and optional Http-Url-Param
Script URL   : http://10.1.1.1/In-Browser-Notification/script.js
Admin Status : Up
AQP Ref      : Yes
-------------------------------------------------------------------------
                                  Notified        Notification Selection
                                                    Criteria Not Matched
-------------------------------------------------------------------------
1:1                                      3                             0
1:2                                      2                             0
1:3                                      0                             0
1:4                                      0                             0
1:5                                      0                             0
-------------------------------------------------------------------------
Total                                    5                             0
-------------------------------------------------------------------------
===============================================================================

http-redirect

Syntax

http-redirect

Context

[Tree] (show>app-assure http-redirect)

Full Context

show application-assurance http-redirect

Description

This command displays HTTP redirect static definitions.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

http-redirect

Syntax

http-redirect redirect-name [detail]

Context

[Tree] (show>app-assure>group http-redirect)

Full Context

show application-assurance group http-redirect

Description

This command displays application assurance http-redirect statistics and status information.

Parameters

redirect-name: Specifies the name of the http-redirect policy.

detail: Displays detailed information.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following table describes the show command output fields:

Table 8. Show HTTP Redirect Output Fields
Label	Description
Template	Specifies HTTP redirect template id information. Each HTTP redirect template returns a specific HTTP redirect message such as HTTP 302 or Javascript and can optionally use macro substitution.
Redirect URL	Specifies the address the subscriber will be redirected to.
Captive Redirect	Specifies Yes if captive redirect is used and No if captive redirect is not used.
Redirect HTTPS	Specifies Yes if redirect https is used and No if redirect https is not used.
VLAN ID	Specifies the AA interface VLAN id used for captive redirect.
Admin Status	Specifies the administrative status (Up/Down) of the HTTP redirect policy.
AQP Ref	Specifies Yes if the HTTP redirect policy is referenced in AQP, and No if it is not.

Output Example

*A:7750# show application-assurance group 1 http-redirect "redirect-portal"

===============================================================================
Application Assurance Group 1 HTTP Redirect redirect-portal
===============================================================================
Description        : (Not Specified)
Template           : 5
                   : Redirect supporting macro substitution using HTTP 302
Redirect URL       : http://172.16.70.100/Redirect/redirect-
portal.html?RequestedURL=$URL
Captive Redirect   : Yes
    Redirect HTTPS : Yes
    VLAN ID        : 20
Admin Status       : Up
AQP Ref            : Yes

-------------------------------------------------------------------------------
Summary Statistics
-------------------------------------------------------------------------------
Grp:Part             Redirects           Client Resets               Redirects
                          Sent                    Sent                Not Sent
-------------------------------------------------------------------------------
1:1                          0                       0                       0
1:2                          0                       0                       0
1:3                          0                       0                       0
-------------------------------------------------------------------------------
Total                        0                       0                       0
-------------------------------------------------------------------------------
===============================================================================

http-redirect

Syntax

http-redirect [detail]

Context

[Tree] (tools>dump>filter>resources http-redirect)

Full Context

tools dump filter resources http-redirect

Description

This command displays the number of unique and total installed HTTP redirect destinations per system.

Parameters

detail: Displays the number of unique and total installed HTTP redirect destinations per system, together with a list of unique HTTP redirect destinations.

Platforms

All

Output

The following output is an example of filter resource HTTP redirect information.

Output Example

A:SROS# /tools dump filter resources http-redirect detail
===============================================================================
Unique http-redirects
===============================================================================
Num   Not emb.       Emb. Override URL
-------------------------------------------------------------------------------
  1          1          0 no ovr.  http://portal_1.com
-------------------------------------------------------------------------------
  2         10          1 no ovr.  http://portal_2.com
-------------------------------------------------------------------------------
  3          1          0 no ovr.  http://portal_3.com
-------------------------------------------------------------------------------
  4          1          0 no ovr.  http://portal_4.com
-------------------------------------------------------------------------------
  5          1          0 no ovr.  http://portal_5.com
===============================================================================
====================================
Http-redirects
====================================
Name                          Count
------------------------------------
Unique redirects                  5
Not embedded redirects           14
Embedded redirects                1
All redirects                    15
====================================

http-redirect-policy

Syntax

http-redirect-policy name

Context

[Tree] (show>subscr-mgmt http-redirect-policy)

Full Context

show subscriber-mgmt http-redirect-policy

Description

This command displays HTTP redirect policy information.

Parameters

name: Specifies the HTTP redirect policy name, up to 32 characters.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

hunt

Syntax

hunt [brief]

Context

[Tree] (show>router>bgp>routes hunt)

Full Context

show router bgp routes hunt

Description

This command displays detailed information about the BGP routes, including information about the advertised routes (RIB-OUT).

hunt is a parameter of the show router bgp routes command. Depending on the parameters that are used to issue the command, the output can display a narrower or wider set of routes, including routes belonging to other address families. See the show router bgp routes command description for syntax variants, parameter descriptions and values, and output examples.

Parameters

brief: Displays summary information about the BGP routes.

Platforms

All

hw-agg-shaper-scheduler-policy

Syntax

hw-agg-shaper-scheduler-policy [hw-agg-shaper-scheduler-policy-name] [ association]

Context

[Tree] (show>qos hw-agg-shaper-scheduler-policy)

Full Context

show qos hw-agg-shaper-scheduler-policy

Description

This command displays hardware aggregate shaper scheduler policy information.

Parameters

hw-agg-shaper-scheduler-policy-name: Specifies the hardware aggregate shaper scheduler policy name, up to 64 characters.

association: Displays hardware aggregate shaper scheduler policy associations.

Platforms

7750 SR-1, 7750 SR-s