r Commands
radius
radius
Syntax
radius server-index
Context
[Tree] (clear radius)
Full Context
clear radius
Description
This command applies to RADIUS servers configured for user access (configure system security radius server). This command clears the RADIUS server state.
Parameters
- server-index
-
Specifies the index for the RADIUS server. The index determines the sequence in which the servers are queried for authentication requests. Servers are queried in order from lowest to highest index.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
radius
Syntax
radius
Context
[Tree] (clear>li radius)
Full Context
clear li radius
Description
This command clears RADIUS associated entities.
Platforms
All
radius
Syntax
radius [user user-name] [policy policy-name] [server-index index] statistics
Context
[Tree] (show radius)
Full Context
show radius
Description
This command displays RADIUS server related information.
Parameters
- user-name
-
Specifies the RADIUS username, up to 32 characters.
- policy-name
-
Specifies the policy name, up to 32 characters.
- index
-
Specifies the server index.
Platforms
All
radius-accounting
radius-accounting
Syntax
radius-accounting [policy-name]
Context
[Tree] (clear>subscriber-mgmt radius-accounting)
Full Context
clear subscriber-mgmt radius-accounting
Description
This command clears RADIUS accounting data for the specified policy.
Parameters
- policy-name
-
The name of the policy. The string is case sensitive and limited to 32 ASCII 7-bit printable characters with no spaces.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
radius-accounting-policy
radius-accounting-policy
Syntax
radius-accounting-policy name association
radius-accounting-policy [name]
radius-accounting-policy name statistics
Context
[Tree] (show>subscr-mgmt radius-accounting-policy)
Full Context
show subscriber-mgmt radius-accounting-policy
Description
This command displays RADIUS accounting policy information.
Parameters
- name
-
Specifies the RADIUS accounting policy name.
- association
-
Displays parameters associated with this RADIUS accounting policy.
- statistics
-
Displays statistics associated with this RADIUS accounting policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subscriber management RADIUS accounting policy information.
Output Example*B:asd-tr0610-dr421# show subscriber-mgmt radius-accounting-policy "ZiggoAcct1813"
statistics
===============================================================================
Radius Accounting Policy ZiggoAcct1813 Statistics
===============================================================================
Tx Requests : 36035966 Rx Responses : 36035966
Request Timeouts : 0 Send Retries : 2713
Send Failed : 0
-------------------------------------------------------------------------------
Radius Servers
-------------------------------------------------------------------------------
Index IP Address Tx Reqs Rx Resps Req Timeouts Req Send Failed
-------------------------------------------------------------------------------
1 172.18.129.36 9012635 9011762 873 0
2 172.18.129.37 9004736 9003814 922 0
3 172.18.129.68 9010236 9009925 311 0
4 172.18.129.69 9011115 9010465 650 0
===============================================================================
RADIUS Accounting Policy Field Descriptions describes subscriber management RADIUS accounting policy output fields.
|
Label |
Description |
|---|---|
|
Tx Requests/TX Reqs |
Displays the number of accounting requests transmitted for this policy. |
|
Rx Responses/Rx Resps |
Displays the number of accounting responses received for this policy. |
|
Request Timeouts/Req Timeouts |
Displays the number of accounting requests which have timed out for this policy. |
|
Send Retries |
Displays the number of retries to a different server for a single accounting request for this policy. |
|
Send Failed Req Send Failed |
Displays how many accounting requests failed because the packet could not be sent out for this policy. |
|
Radius Servers |
Displays a table in which the statistics associated with this RADIUS accounting policy are broken down by individual RADIUS server. The table columns are: Index—displays the index number assigned to the RADIUS server. The index determines the sequence in which the servers are queried for authentication requests. Servers are queried in order from lowest to highest index. IP Address—the address of the RADIUS server. TX Reqs—see TX Requests in this table. Rx Resps—see RX Responses in this table. Req Timeouts—see Request Timeouts in this table. Req Send Failed—see Send Failed in this table. |
radius-accounting-policy
Syntax
radius-accounting-policy [rad-acct-plcy-name]
radius-accounting-policy rad-acct-plcy-name associations
radius-accounting-policy rad-acct-plcy-name statistics
Context
[Tree] (show>app-assure radius-accounting-policy)
Full Context
show application-assurance radius-accounting-policy
Description
This command displays RADIUS accounting policy information.
Parameters
- rad-acct-plcy-name
-
Specifies the RADIUS accounting policy.
- associations
-
Specifies to show what contexts are associated with this policy.
- statistics
-
Specifies to show statistics related to this policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
radius-accounting-policy
Syntax
radius-accounting-policy rad-acct-plcy-name [ server server-index] statistics
Context
[Tree] (clear>app-assure radius-accounting-policy)
Full Context
clear application-assurance radius-accounting-policy
Description
This command clears application assurance RADIUS accounting statistics for the specified policy.
Parameters
- policy-name
-
The name of the policy. The string is case sensitive and limited to 32 ASCII 7-bit printable characters with no spaces.
- server-index
-
The index for the RADIUS server.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
radius-accounting-policy
Syntax
radius-accounting-policy [name]
Context
[Tree] (show>ipsec radius-accounting-policy)
Full Context
show ipsec radius-accounting-policy
Description
This command displays RADIUS accounting-policy related information.
Parameters
- name
-
Specifies an existing RADIUS accounting policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of the show ipsec radius-accounting-policy command.
Output Exampleshow ipsec radius-accounting-policy
===============================================================================
Radius Accounting Policy
===============================================================================
Policy Name Server Policy Include Attribs Upd Int
Jitter
-------------------------------------------------------------------------------
rad-acct-policy-1 nasId nasPortId 20
framedIpAddr
10
===============================================================================
Number of entries: 1
===============================================================================
show ipsec radius-accounting-policy "rad-acct-policy-1"
===============================================================================
IPsec Radius Accounting Policy Detail
===============================================================================
Name : rad-acct-policy-1
Server Policy : (Not Specified)
Include Attr : nasId nasPortId framedIpAddr
Update Interval : 20
Jitter : 10 sec.
===============================================================================
radius-acct
radius-acct
Syntax
radius-acct
Context
[Tree] (show>service>active-subscribers>hierarchy radius-acct)
Full Context
show service active-subscribers hierarchy radius-acct
Description
This command provides information about subscriber RADIUS accounting sessions including: the accounting policy name, the accounting mode, the interim intervals, the accounting session ID, and the multi-session ID. If there are no RADIUS accounting sessions enabled for subscribers, this command still shows the session ID that can be used by CoA.
PD hosts modeled as routes are not considered hosts, and therefore, are not shown in the output of this command.
This command only shows a numeric RADIUS session ID even if the RADIUS accounting policy is configured using the descriptive format.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subscriber RADIUS accounting session information.
Output Example# show service active-subscribers hierarchy radius-acct
===============================================================================
Active Subscribers Hierarchy (accounting information)
===============================================================================
-- sub-01-0501
(sub-profile-1)
| Acct-policy : acct-policy-1
| Mode : Queue Instance (Interim)
| : Session (Interim-Host)
| Cfg. update ivl : 01h00m00s
|
+-- sap:[1/1/4:2111.51] - sla:sla-profile-1
| |
| +-- Queue Instance Acct - acct-policy-1
| session-id : 0609FF000000175FD249FD
| multi-session-id : 0609FF000000175FD249FD
| interim-interval : 01h00m00s
|
+-- IPOE-Session - mac:00:01:01:00:00:51
| |
| +-- Session Acct - acct-policy-1
| session-id : 0609FF000000155FD249FD
| multi-session-id: 0609FF000000175FD249FD
| interim-interval: 01h00m00s
|
|-- 10.250.13.2
| |
| +-- no radius acct
| session-id : 0609FF000000185FD74E68
|
+-- 2001:db8:1:200::1/128
|
+-- no radius acct
| session-id : 0609FF000000165FD249FD
|
+-- 2001:db8:d102::/64
session-id : N/A
multi-session-id: N/A
-------------------------------------------------------------------------------
Number of active subscribers : 1
===============================================================================
radius-acct-terminate-cause
radius-acct-terminate-cause
Syntax
radius-acct-terminate-cause
Context
[Tree] (tools>dump>aaa radius-acct-terminate-cause)
Full Context
tools dump aaa radius-acct-terminate-cause
Description
This command shows all available termination causes and their respective number values. The TermCause is equivalent to VSA 226 Alc-Error-Code numeric values. The description is equivalent to VSA 227Alc-Error-Message string.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
radius-attr-username
radius-attr-username
Syntax
radius-attr-username [user-name] [summary]
Context
[Tree] (tools>dump>subscr-mgmt radius-attr-username)
Full Context
tools dump subscriber-mgmt radius-attr-username
Description
This command displays a list of subscriber IDs associated to each username and statistics associated to the username.
Parameters
- user-name
-
Specifies the username that matches the RADIUS attribute VSA [1] username. A single username can also be specified to query the list of associated subscriber IDs.
- summary
-
Displays summary RADIUS attribute username information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
radius-authentication-policy
radius-authentication-policy
Syntax
radius-authentication-policy [name]
Context
[Tree] (show>ipsec radius-authentication-policy)
Full Context
show ipsec radius-authentication-policy
Description
This command displays IPsec RADIUS authentication policy information.
Parameters
- name
-
Specifies an existing RADIUS authentication policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
radius-configuration
radius-configuration
Syntax
radius-configuration
Context
[Tree] (show>aaa radius-configuration)
Full Context
show aaa radius-configuration
Description
This command displays RADIUS configuration information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of AAA RADIUS configuration information.
Output Example# show aaa radius-configuration
===============================================================================
RADIUS configuration
===============================================================================
CoA Port : 3799
===============================================================================
AAA ISA RADIUS Policy Field Descriptions provides a description of the counters in the output of the show aaa isa-radius-policy command.
|
Label |
Description |
|---|---|
|
CoA Port |
The RADIUS Change of Authorization (CoA) port |
radius-proxy-server
radius-proxy-server
Syntax
radius-proxy-server server-name
radius-proxy-server server-name cache
radius-proxy-server server-name cache hex-key hex-string
radius-proxy-server server-name cache string-key string
radius-proxy-server server-name cache summary
radius-proxy-server server-name statistics
radius-proxy-server
Context
[Tree] (show>router radius-proxy-server)
Full Context
show router radius-proxy-server
Description
This command displays RADIUS proxy server information.
Parameters
- server-name
-
Specifies the default RADIUS proxy server name created in the config>router>radius-proxy context.
- cache
-
Displays cached information.
- hex-string
-
Displays the hex key string.
- string
-
Displays the packet type of the RADIUS messages to use to generate the key for the cache of this RADIUS proxy server.
- summary
-
Displays summarized information.
- statistics
-
Displays statistics for the specified RADIUS proxy server.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subscriber RADIUS proxy server.
Output Example*B:asd-tr0610-dr421# show router radius-proxy-server "ZiggoRadiusProxyAnyCast" statistics
===============================================================================
RADIUS Proxy server statistics for "ZiggoRadiusProxyAnyCast"
===============================================================================
Rx packet : 28454097
Rx Access-Request : 24846521
Rx Accounting-Request : 3607576
Rx dropped : 22986
Retransmit : 22986
Server admin down : 0
No RADIUS policy configured : 0
No load-balance-key configured : 0
Invalid length : 0
Invalid Code field : 0
Invalid attribute encoding : 0
Invalid User-Name : 0
Invalid password : 0
Invalid accounting Authenticator : 0
Invalid Message-Authenticator : 0
No memory : 0
Accounting-Request with invalid Acct-Status-Type : 0
Accounting-Request with no Acct-Status-Type : 0
Registered user overload : 0
Dropped by Python : 0
Tx Access-Accept : 1929725
Tx Access-Reject : 302354
Tx Access-Challenge : 22598950
Tx Accounting-Response : 3598730
Tx dropped : 1351
No key to cache : 0
Cache key too long : 0
Cache attributes too long : 0
Reached maximum number of cache entries : 0
No memory : 0
Server timeout : 1351
Server authentication failure : 0
Server invalid Code : 0
Invalid attribute encoding : 0
Registered user overload : 0
No RADIUS server configured : 0
RADIUS server send failure : 0
Dropped by Python : 0
===============================================================================
*B:asd-tr0610-dr421# show router radius-proxy-server "ZiggoRadiusDRPProxyanyCast-LEG" statistics
===============================================================================
ISA RADIUS Proxy server statistics for "ZiggoRadiusDRPProxyanyCast-LEG"
===============================================================================
Group 1 member 1
-------------------------------------------------------------------------------
Rx packet : 72250262
Rx Access-Request : 61457394
Rx Accounting-Request : 10792868
Rx dropped : 1525690
Retransmit : 28470
Wrong purpose : 0
No UE MAC to cache : 1497212
Client context limit reached : 0
No ISA RADIUS policy configured : 0
Invalid attribute encoding : 0
Invalid password : 0
Accounting-Request with invalid Acct-Status-Type : 0
Accounting-Request with no Acct-Status-Type : 0
Invalid accounting Authenticator : 0
Invalid Message-Authenticator : 8
Management core overload : 0
Tx Access-Accept : 5830313
Tx Access-Reject : 743060
Tx Access-Challenge : 54844862
Tx Accounting-Response : 9294168
Tx dropped : 12226
Server timeout : 12169
Invalid response Authenticator : 57
Invalid Message-Authenticator : 0
Invalid attribute encoding : 0
RADIUS server send failure : 0
Proxy Server Field Descriptions describes subscriber RADIUS proxy server output fields.
|
Label |
Description |
|---|---|
|
Invalid response Authenticator Rx packet |
The number of packets received by this RADIUS proxy server |
|
Rx Access-Request |
The number of Access-Request packets received by this RADIUS proxy server |
|
Rx Accounting-Request |
The number of Accounting-Request packets received by this RADIUS proxy server |
|
Rx dropped |
The number of packets received by this RADIUS proxy server but dropped |
|
Retransmit |
The number of packets received by this RADIUS proxy server that were rejected because they are retransmitted |
|
Wrong purpose |
The number of packets received by this RADIUS proxy server that were rejected because the value of tmnxRadProxSrvPurpose is set to a value not matching the type of packet |
|
No UE MAC to cache |
The number of packets received by this RADIUS proxy server that were rejected because the UE MAC address was not present in the packet |
|
Client context limit reached |
The number of packets received by this RADIUS proxy server that were rejected because the limit of client contexts was reached. For each RADIUS transaction a client context is created, and are deleted once the transaction is finished. |
|
No ISA RADIUS policy configured |
The number of packets received by this RADIUS proxy server that were rejected because it has no ISA RADIUS server policy configured for that type of packet |
|
Server admin down |
The number of packets received by this RADIUS proxy server that were rejected because it is administratively shut down |
|
No RADIUS policy configured |
The number of packets received by this RADIUS proxy server that were rejected because it has no RADIUS server policy configured for that type of packet |
|
No load-balance-key configured |
The number of packets received by this RADIUS proxy server that were rejected because the selected RADIUS server policy's algorithm is set to hashBased and no load balance key is configured |
|
Invalid length |
The number of packets received by this RADIUS proxy server that were rejected because their length was invalid |
|
Invalid Code field |
The number of packets received by this RADIUS proxy server that were rejected because they had an invalid Code field |
|
Invalid attribute encoding |
The number of packets received by this RADIUS proxy server that were rejected because one of the attributes was incorrectly encoded |
|
Invalid User-Name |
The number of packets received by this RADIUS proxy server that were rejected because they contained an invalid User-Name attribute |
|
Invalid password |
The number of packets received by this RADIUS proxy server that were rejected because the User-Password attribute could not be decoded |
|
Invalid accounting Authenticator |
The number of accounting packets received by this RADIUS proxy server that were rejected because they contained an invalid Authenticator field |
|
Invalid Message-Authenticator |
The number of packets received by this RADIUS proxy server that were rejected because they contained an invalid Message-Authenticator attribute |
|
Management core overload |
The number of packets that were rejected by this RADIUS server because the ISA management core is not able to process any new RADIUS requests because of overload |
|
No memory |
The number of packets that were rejected by this RADIUS server because there was not enough memory to store them |
|
Accounting-Request with invalid Acct-Status-Type |
The number of accounting packets received by this RADIUS proxy server that were rejected because they contained an invalid Acct-Status-Type attribute |
|
Accounting-Request with no Acct-Status-Type |
The number of accounting packets received by this RADIUS proxy server that were rejected because they contained no Acct-Status-Type attribute |
|
Registered user overload |
The number of packets that were rejected by this RADIUS server because the registered user indicated to be in overload |
|
Dropped by Python |
The number of packets received by this RADIUS proxy server but dropped by Python |
|
Tx Access-Accept |
The number of Access-Accept packets transmitted by this RADIUS proxy server |
|
Tx Access-Reject |
The number of Access-Reject packets transmitted by this RADIUS proxy server |
|
Tx Access-Challenge |
The number of Access-Challenge packets transmitted by this RADIUS proxy server |
|
Tx Accounting-Response |
The number of Accounting-Response packets transmitted by this RADIUS proxy server |
|
Tx dropped |
The number of packets dropped by this RADIUS proxy server before transmission |
|
No key to cache |
The number of packets that could not be cached by this RADIUS proxy server because the key information was not present in the packet |
|
Cache key too long |
The number of packets that could not be cached by this RADIUS proxy server because the key information present in the packet was too long |
|
Cache attributes too long |
The number of packets that could not be cached by this RADIUS proxy server because the total length of the attributes is too long |
|
Reached maximum number of cache entries |
The number of packets that could not be cached by this RADIUS proxy server because the limit has been reached |
|
No memory |
The number of packets that could not be transmitted by this RADIUS proxy server because there was not enough memory |
|
Server timeout |
The number of packets that were dropped because the RADIUS servers have timed out |
|
Server authentication failure |
The number of packets that were dropped because the RADIUS server replied with a packet which failed authentication (invalid response Authenticator or Message Authenticator attribute) |
|
Server invalid Code |
The number of packets that were dropped because the RADIUS server replied with a packet with an invalid Code field |
|
Invalid attribute encoding |
The number of packets that were dropped because the RADIUS server replied with a packet with an invalid attribute |
|
Registered user overload |
The number of packets that were dropped because the registered user indicated to be in overload |
|
No RADIUS server configured |
The number of packets that were dropped by this RADIUS server because the RADIUS server policy has no servers configured |
|
RADIUS server send failure |
The number of packets that were dropped by this RADIUS server because the packet could not get transmitted to one of the servers in the RADIUS server policy |
|
Dropped by Python |
The number of packets that were dropped by this RADIUS server because the packet was dropped by the Python script |
|
Invalid response Authenticator |
The number of packets that were dropped because the RADIUS server replied with a packet which failed authentication |
radius-proxy-server
Syntax
radius-proxy-server server-name statistics
Context
[Tree] (clear>router radius-proxy-server)
Full Context
clear router radius-proxy-server
Description
This command clears RADIUS proxy server data.
Parameters
- server-name
-
Specifies the proxy server name.
- statistics
-
Clears statistics for the specified server.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
radius-script-policy
radius-script-policy
Syntax
radius-script-policy [policy-name]
radius-script-policy policy-name association
radius-script-policy policy-name script {primary | secondary}
Context
[Tree] (show>aaa radius-script-policy)
Full Context
show aaa radius-script-policy
Description
This command displays RADIUS script policy information.
Parameters
- policy-name
-
Specifies the RADIUS script policy name, up to 32 characters.
- association
-
Displays the associations related to the RADIUS script policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
radius-server
radius-server
Syntax
radius-server server-name
radius-server server-name associations
radius-server
Context
[Tree] (show>router radius-server)
Full Context
show router radius-server
Description
This command displays RADIUS server configuration information.
Parameters
- server-name
-
Specifies the RADIUS server name, up to 32 characters.
- associations
-
Displays the RADIUS server policy associations for the specified server.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following outputs are examples of RADIUS server information.
Output Example[/]
A:patrick@pe1# /show router radius-server "radius-1"
===============================================================================
RADIUS server "radius-1"
===============================================================================
Description : (Not Specified)
Address : 172.16.6.2
Port Auth/Acct : 1812/1813
CoA script policy : (Not Specified)
Python policy : (Not Specified)
Pending request limit : 4096
Accept CoA : true
Last management change : 07/05/2022 14:30:02
===============================================================================
[/]
A:patrick@pe1# /show router radius-server "radius-1" associations
===============================================================================
RADIUS server policy associations for "radius-1"
===============================================================================
Name Id
-------------------------------------------------------------------------------
aaa-radius-1 1
-------------------------------------------------------------------------------
No. of policies: 1
===============================================================================
radius-server-policy
radius-server-policy
Syntax
radius-server-policy policy-name [acct-on-off]
radius-server-policy policy-name associations
radius-server-policy policy-name msg-buffer-stats
radius-server-policy policy-name statistics
radius-server-policy [acct-on-off]
Context
[Tree] (show>aaa radius-server-policy)
Full Context
show aaa radius-server-policy
Description
This command displays RADIUS server policy configuration information.
Parameters
- policy-name
-
Displays information for the specified RADIUS server policy.
- association
-
Displays the information configured with the RADIUS server policy.
- msg-buffer-stats
-
Displays statistics related to the RADIUS messages that are buffered for each specified RADIUS server policy.
- statistics
-
Displays statistics for the specified RADIUS server policy.
- act-on-off
-
Displays the admin state of the acct-on-off feature.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of AAA RADIUS server policy information.
Output Example*B:asd-tr0610-dr421# show aaa radius-server-policy "ZiggoAAA_anycast" statistics
===============================================================================
RADIUS server policy "ZiggoAAA_anycast" statistics
===============================================================================
Tx transaction requests : 24818681
Rx transaction responses : 24817329
Transaction requests timed out : 1351
Transaction requests send failed : 0
Packet retries : 12410
Transaction requests send rejected : 0
Authentication requests failed : 303530
Accounting requests failed : 0
Ratio of access-reject over auth responses : 13%
Transaction success ratio : 99%
Transaction failure ratio : 1%
Statistics last reset at : 05/21/2015 01:11:39
RADIUS Server Policy Statistics Field Descriptions describes RADIUS server policy statistics output fields.
|
Label |
Description |
|---|---|
|
Tx transaction requests |
The number of RADIUS transaction requests transmitted |
|
Rx transaction responses |
The number of RADIUS transaction responses received |
|
Transaction requests timed out |
The number of RADIUS transaction requests that have timed out |
|
Transaction requests send failed |
The number of RADIUS transaction requests that could not be transmitted |
|
Packet retries |
The number of times a RADIUS request packet was retransmitted to a server |
|
Transaction requests send rejected |
The number of RADIUS transaction requests that were not transmitted due to unacceptable configuration |
|
Authentication requests failed |
The number of authentication failures for this policy |
|
Accounting requests failed |
The number of accounting failures for this policy |
|
Ratio of access-reject over auth responses |
The ratio of access-rejects in the auth responses for this policy |
|
Transaction success ratio |
The transaction success ratio for this policy |
|
Transaction failure ratio |
The transaction failure ratio for this policy |
|
Statistics last reset at |
Indicated the date and time at which the statistics for this policy were last reset |
radius-server-policy
Syntax
radius-server-policy policy-name msg-buffer [session-id acct-session-id]
Context
[Tree] (tools>dump>aaa radius-server-policy)
Full Context
tools dump aaa radius-server-policy
Description
This command dumps the RADIUS message buffer content for the specified radius-server-policy:
-
message-type (acct-interim or acct-stop)
-
Acct-Session-Id
-
Remaining lifetime
When specifying the session-id, the message details are displayed.
Parameters
- policy-name
-
Specifies the radius-server-policy for which the message buffer content should be displayed.
- acct-session-id
-
Displays the RADIUS message details for the message with specified session-id that is stored in the RADIUS message buffer.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
radius-server-policy
Syntax
radius-server-policy policy-name msg-buffer [acct-session-id acct-session-id]
radius-server-policy policy-name statistics [msg-buffer-only]
radius-server-policy policy-name server server-index statistics
Context
[Tree] (clear>aaa radius-server-policy)
Full Context
clear aaa radius-server-policy
Description
This command dumps the RADIUS message buffer content for the specified radius-server-policy:
-
message-type (acct-interim or acct-stop)
-
Acct-Session-Id
-
Remaining lifetime
When specifying the session-id, the message details are displayed.
Parameters
- policy-name
-
Specifies the radius-server-policy for which the information should be cleared.
- acct-session-id
-
Deletes all RADIUS messages or the RADIUS message with specified session-id from the RADIUS message buffer.
- msg-buffer-only
-
Clears all statistics for the specified radius-server-policy: radius-server-policy statistics, RADIUS server statistics and RADIUS message buffer statistics. With the optional keyword msg-buffer-only, only the RADIUS message buffer statistics are cleared.
- server-index
-
Clears the RADIUS server statistics for the specified server-index in the specified radius-server-policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
range
range
Syntax
range [area-id]
Context
[Tree] (show>router>ospf range)
[Tree] (show>router>ospf3 range)
Full Context
show router ospf range
show router ospf3 range
Description
This command displays ranges of addresses on an Area Border Router (ABR) for the purpose of route summarization or suppression.
Parameters
- area-id
-
Displays the configured ranges for the specified area.
Platforms
All
Output
OSPF Range Output
OSPF Range Output Fields describes the OSPF range output fields.
|
Label |
Description |
|---|---|
|
Area Id |
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
|
Address/Mask |
The mask for the range expressed as a decimal integer mask length or in dotted decimal notation. |
|
Advertise |
False — The specified address/mask is not advertised outside the area. True — The specified address/mask is advertised outside the area. |
|
LSDB Type |
NSSA — This range was specified in the NSSA context, and specifies that the range applies to external routes (via type-7 LSAs) learned within the NSSA when the routes are advertised to other areas as type-5 LSAs. Summary — This range was not specified in the NSSA context, the range applies to summary LSAs even if the area is an NSSA. |
A:ALA-A# show router ospf 1 range
==========================================================
Rtr Base OSPFv2 Instance 1 Ranges
==========================================================
Area Id Address/Mask Advertise LSDB Type
----------------------------------------------------------
No. of Ranges: 0
==========================================================
A:ALA-A#
A:ALA-A# show router ospf range 180.0.7.9
==========================================================
Rtr Base OSPFv2 Instance 0 Ranges for Area-Id 180.0.7.9
==========================================================
Area Id Address/Mask Advertise LSDB Type
----------------------------------------------------------
No. of Ranges: 0
==========================================================
A:ALA-A#
reassembly-statistics
reassembly-statistics
Syntax
reassembly-statistics group nat-group-id member [member]
Context
[Tree] (clear reassembly-statistics)
Full Context
clear reassembly-statistics
Description
This command clears IP reassembly statistics.
Parameters
- nat-group-id
-
Specifies the NAT group ID.
- member
-
Specifies the member ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
recover-l2aw-bypass
recover-l2aw-bypass
Syntax
recover-l2aw-bypass mda
Context
[Tree] (tools>perform>nat recover-l2aw-bypass)
Full Context
tools perform nat recover-l2aw-bypass
Description
This command restores NAT resources to the recovered MS-ISA and resumes forwarding subscriber traffic.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
redirect
redirect
Syntax
redirect statistics
Context
[Tree] (tools>dump>system>cpm-http-redirect redirect)
Full Context
tools dump system cpm-http-redirect redirect
Description
This command displays system level statistics for all redirected TCP sessions in optimized- mode. These include the following:
-
Close requests to TCP: TCP layer requested to send a FIN
-
Abort requests to TCP: error in the received packet and the TCP layer needs to send a RST
-
Data requests to TCP: number of redirects sent to the TCP layer
-
Connections deleted: number of connections closed without a successful redirect performed
-
HTTP GET parse errors: formatting error in the HTTP request
-
HTTP GET process errors: HTTP GET is formatted properly but the redirect still fails. Example: system unable to find a corresponding host
-
HTTP Response dropped: communication error; the redirect failed to be sent to the TCP layer
Parameters
- statistics
-
Specifies system level statistics for all redirected TCP sessions.
Platforms
All
Output
The following output is an example of the statistics command information.
Output ExampleA# tools dump system cpm-http-redirect redirect statistics
===============================================================================
CPM HTTP Redirect statistics
===============================================================================
Close requests to TCP : 2
Abort requests to TCP : 0
Data requests to TCP : 2
Requests rejected - out of memory : 0
Connections deleted : 0
HTTP GET parse errors : 0
HTTP GET process errors : 0
HTTP Response dropped : 0
redirect-policy
redirect-policy
Syntax
redirect-policy [redirect-policy-name {dest ip-address | associations}]
Context
[Tree] (show>filter redirect-policy)
Full Context
show filter redirect-policy
Description
This command shows redirect filter information.
Parameters
- redirect-policy-name
-
Displays information for the specified redirect policy, up to 32 characters.
- dest ip-address
-
Directs the router to use a specified IP address for communication.
- associations
-
Appends association information.
Platforms
All
Output
Redirect Policy Output — The following output is an example of redirect policy information, and Filter Redirect-Policy Output Fields describes the fields.
Output ExampleA:ALA-A>config>filter# show filter redirect-policy
===============================================================================
Redirect Policies
===============================================================================
Redirect Policy Applied Description
-------------------------------------------------------------------------------
wccp Yes
redirect1 Yes New redirect info
redirect2 Yes Test test test test
===============================================================================
ALA-A>config>filter#
ALA-A>config>filter# show filter redirect-policy redirect1
===============================================================================
Redirect Policy
===============================================================================
Redirect Policy: redirect1 Applied : Yes
Description : New redirect info
Active Dest : 10.10.10.105
-------------------------------------------------------------------------------
Destination : 10.10.10.105
-------------------------------------------------------------------------------
Description : another test
Admin Priority : 95 Oper Priority: 105
Admin State : Up Oper State : Down
Ping Test
Source Address : None
Interval : 1 Timeout : 30
Drop Count : 5
Hold Down : 0 Hold Remain : 0
Last Action at : 03/19/2007 00:46:55 Action Taken : Disable
===============================================================================
A:ALA-A>config>filter#
|
Label |
Description |
|---|---|
|
Redirect Policy |
Specifies a specific redirect policy |
|
Applied |
Specifies whether the redirect policy is applied to a filter policy entry |
|
Description |
Displays the user-provided description for this redirect policy |
|
Active Destination |
IP address — specifies the IP address of the active destination |
|
none — indicates that there is currently no active destination |
|
|
Destination |
Specifies the destination IP address |
|
Oper Priority |
Specifies the operational value of the priority for this destination; the highest operational priority across multiple destinations is used as the preferred destination |
|
Admin Priority |
Specifies the configured base priority for the destination |
|
Admin State |
Specifies the configured state of the destination |
|
Out of Service — tests for this destination will not be conducted |
|
|
Oper State |
Specifies the operational state of the destination |
|
Ping Test |
Specifies the name of the ping test |
|
Source Address |
Specifies the source address of the ping test (if any) |
|
Timeout |
Specifies the amount of time in seconds that is allowed for receiving a response from the far-end host; if a reply is not received within this time the far-end host is considered unresponsive |
|
Interval |
Specifies the amount of time in seconds between consecutive requests sent to the far end host |
|
Drop Count |
Specifies the number of consecutive requests that must fail for the destination to declared unreachable |
|
Hold Down |
Specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable |
|
Hold Remain |
Specifies the amount of time in seconds that the system will remain in a hold down state before being used again |
|
Last Action at |
Displays a time stamp of when this test received a response for a probe that was sent out |
redirect-policy
Syntax
redirect-policy redirect-policy-name
Context
[Tree] (tools>perform>filter redirect-policy)
Full Context
tools perform filter redirect-policy
Description
Commands in this context perform redirect policy operations.
Parameters
- redirect-policy-name
-
Specifies a particular redirect policy name, up to 32 characters.
Platforms
All
redirect-policy-binding
redirect-policy-binding
Syntax
redirect-policy-binding [name]
Context
[Tree] (show>filter redirect-policy-binding)
Full Context
show filter redirect-policy-binding
Description
This command shows configured redirect-policy bindings information.
Parameters
- name
-
Displays information for the specified redirect policy binding, up to 32 characters.
Platforms
All
Output
Redirect Policy Output — The following output is an example of redirect policy binding information, and Filter Redirect Policy Bindings Output Fields describes the fields.
Output ExampleA:ALA-A>config>filter# show filter redirect-policy-binding
===============================================================================
Redirect Policy Bindings
===============================================================================
Name Binding Operator Oper State
-------------------------------------------------------------
TestBinding And Up
===============================================================================
ALA-A#
|
Label |
Description |
|---|---|
|
Test Binding |
Specifies a specific test binding field |
redundancy
redundancy
Syntax
redundancy
Context
[Tree] (tools>dump redundancy)
Full Context
tools dump redundancy
Description
Commands in this context dump redundancy parameters.
Platforms
All
redundancy
Syntax
redundancy
Context
[Tree] (show redundancy)
Full Context
show redundancy
Description
Commands in this context show redundancy information.
Platforms
All
redundancy
Syntax
redundancy
Context
[Tree] (tools>perform redundancy)
Full Context
tools perform redundancy
Description
Commands in this context display redundancy information.
Platforms
All
redundancy
Syntax
redundancy
Context
[Tree] (clear redundancy)
Full Context
clear redundancy
Description
Commands in this context clear redundancy parameters.
Platforms
All
reflectors
reflectors
Syntax
reflectors
Context
[Tree] (show>test-oam>twamp>twamp-light reflectors)
Full Context
show test-oam twamp twamp-light reflectors
Description
This command shows TWAMP-Light reflector information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of TWAMP Light reflector information.
Output Exampleshow test-oam twamp twamp-light reflectors
=======================================================================
TWAMP-Light Reflectors
=======================================================================
Router/VPRN Admin UDP Port Prefixes Frames Rx Frames Tx
-----------------------------------------------------------------------
Base Up 15000 1 0 0
500 Up 15000 2 6340 6340
-----------------------------------------------------------------------
No. of TWAMP-Light Reflectors: 2
=======================================================================
refresh-lsas
refresh-lsas
Syntax
refresh-lsas [lsa-type] [area-id]
Context
[Tree] (tools>perform>router>ospf3 refresh-lsas)
[Tree] (tools>perform>router>ospf refresh-lsas)
Full Context
tools perform router ospf3 refresh-lsas
tools perform router ospf refresh-lsas
Description
This command refreshes LSAs for OSPF.
Platforms
All
release-hold-down
release-hold-down
Syntax
release-hold-down interface interface-name [ protocol protocol] [static-policer name]
release-hold-down sap sap-id [protocol protocol] [static-policer name]
Context
[Tree] (tools>perform>security>dist-cpu-protection release-hold-down)
Full Context
tools perform security dist-cpu-protection release-hold-down
Description
This command releases a Distributed CPU Protection (DCP) policer from a hold-down countdown (or indefinite hold-down if configured as such).
Parameters
- interface interface-name
-
Specifies Router interface name.
- sap sap-id
-
Specifies sap identifier.
- protocol protocol
-
Specifies DCP protocol name (for example, arp, dhcp).
- static-policer name
-
Specifies DCP static policer name as defined in the DCP policy.
Platforms
All
remap-lease-state
remap-lease-state
Syntax
remap-lease-state old-mac ieee-address mac ieee-address
remap-lease-state sap sap-id [mac ieee-address]
Context
[Tree] (tools>perform>subscr-mgmt remap-lease-state)
Full Context
tools perform subscriber-mgmt remap-lease-state
Description
This command allows the remapping of all existing hosts if network card on CMTS/WAC side is changed is required.
When this command is executed, the following restrictions apply:
-
When sap is taken, all leases associated with the SAP are re-written.
-
For a SAP with a configured MAC in lease-populate command, this MAC is taken.
-
For a SAP without a configured MAC the MAC from tools command is taken.
-
For a SAP without a configured MAC and no MAC in tools command no action is performed.
-
-
When using the old-mac option, providing a new MAC ieee-address is mandatory.
This command is applicable only when dealing with DHCP lease states which were instantiated using l2header mode of DHCP operation.
Parameters
- old-mac ieee-address
-
Specifies the old MAC address to remap.
- mac ieee-address
-
Specifies that the provisioned MAC address is used in the anti-spoofing entries for this SAP when l2-header is enabled. The parameter may be changed mid-session. Existing sessions will not be re-programmed unless a tools perform command is issued for the lease.
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
When configured, the SAP parameter remaps all MAC addresses of DHCP lease states on the specified SAP. When no optional MAC parameter is specified, the sap sap-id command remaps all MAC addresses of lease states towards the MAC address specified in the l2-header configuration.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
remote-bfd-discrim
remote-bfd-discrim
Syntax
remote-bfd-discrim bfd-discriminator
Context
[Tree] (tools>dump>router>lsp-bfd remote-bfd-discrim)
Full Context
tools dump router lsp-bfd remote-bfd-discrim
Description
This command displays information the BFD-on-LSP sessions with a specified remote discriminator.
Parameters
- bfd-discriminator
-
Specifies the BFD discriminator.
Platforms
All
remote-management
remote-management
Syntax
remote-management
Context
[Tree] (clear>system>management-interface remote-management)
Full Context
clear system management-interface remote-management
Description
This command clears the remote management service.
Platforms
All
remote-management
Syntax
remote-management [detail]
remote-management manager [manager-name]
Context
[Tree] (show>system>management-interface remote-management)
Full Context
show system management-interface remote-management
Description
This command displays a summarized status of the Remote Management service.
Parameters
- detail
-
Displays detailed remote management service information.
- manager-name
-
Displays remote management service information for the specified manager.
Platforms
All
Output
The following outputs are examples of the show system management-interface remote- management command and parameters, and the tables describe the fields.
-
Output Example: remote-management; output fields Output Fields: remote-management
-
Output Example: remote-management detail; output fields Output Field: remote-management detail and Output Fields: remote-management for fields that are common to all the remote management output commands
-
Output Example: remote-management manager; output fields Output Fields: remote-management manager and Output Fields: remote-management for fields that are common to all the remote management output commands
#show system management-interface remote-management
===============================================================================
Remote-management service
===============================================================================
Administrative State : Enabled
Operational State : Up
Operational down Reason : N/A
-------------------------------------------------------------------------------
Number of configured managers : 2
Number of operational managers : 1
===============================================================================
|
Label |
Description |
|---|---|
|
Administrative State |
Displays the administrative state of the management service |
|
Operational State |
Displays the operational state of the management service |
|
Operational Down Reason |
Displays the reason for the last operationally down state change |
|
Number of configured managers |
Displays the total number of configured managers |
|
Number of operational managers |
Displays the total number of managers whose operational state is Up |
# show system management-interface remote-management detail
===============================================================================
Remote-management service
===============================================================================
Administrative state : Enabled
Operational state : Up
Operational down reason : N/A
Last hello time : 2020/10/06 10:24:29
Last Registration Time : 2020/10/06 10:24:29
Last Registration Status : Succeeded
Sent registration messages : 83
Failed registration messages : 0
Cancelled registrations : 0
-------------------------------------------------------------------------------
Number of configured managers : 1
Number of operational managers : 1
-------------------------------------------------------------------------------
Manager Name Adm Opr TLS
Manager IP
-------------------------------------------------------------------------------
nish-manager Up Up No
192.168.65.3
===============================================================================
|
Label |
Description |
|---|---|
|
Last hello Time |
Displays the time of the last hello |
|
Last Registration Time |
Displays the time of the last registration |
|
Last Registration Status |
Displays the time of the last registration status |
|
Sent registration messages |
Displays the number of sent registration messages |
|
Failed registration messages |
Displays the number of failed registration messages |
|
Canceled registration messages |
Displays the number of canceled registration messages |
|
Manager name |
Displays the name of the manager |
|
Manager IP |
Displays the IP address of the manager |
|
Adm |
Displays the administrative state of the manager |
|
Opr |
Displays the operational state of the manager |
|
TLS |
Displays whether TLS is configured for the manager |
# show system management-interface remote-management manager nish-manager1
===============================================================================
Remote manager
===============================================================================
-------------------------------------------------------------------------------
Manager Name : nish-manager1
Manager Address : 192.168.65.3
Description : My remote manager
-------------------------------------------------------------------------------
Administrative State : Enabled
Operational State : Up
Operational down reason : N/A
Router instance : Management
Device name : Dut-C
Device label :
TLS secured : No
TLS profile : Not Set
Source Address : 192.168.66.166
Source TCP port : 57400
Manager TCP port : 57400
Last registration status : Succeeded
Last registration time : 2020/10/06 10:34:29
Last hello time : 2020/10/06 10:34:29
Time until next hello : 315s
Sent registration messages : 80
Failed registration messages : 0
Canceled registrations : 0
===============================================================================
|
Label |
Description |
|---|---|
|
Manager name |
Displays the name of this manager |
|
Manager Address |
Displays IP address of this manager |
|
Description |
Displays the configured description for this manager |
|
Router instance |
Displays the router instance used by this manager |
|
Device name |
Displays the device name that is configured for this manager |
|
Device label |
Displays the device label that is configured for this manager |
|
TLS secured |
Displays the configured TLS status |
|
TLS profile |
Displays TLS profile, if configured |
|
Source address |
Displays the configured source address |
|
Source TCP port |
Displays the TCP source port |
|
Manager TCP port |
Displays the manager TCP port |
|
Last registration status |
Displays the status of the last registration attempt for this manager |
|
Last registration time |
Displays the time of the last registration for this manager |
|
Last hello time |
Displays the time of the last hello for this manager |
|
Time until next hello |
Displays the time until the next hello for this manager |
|
Sent registration messages |
Displays the number of registration messages sent for this manager |
|
Failed registration messages |
Displays the number of failed registration messages for this manager |
|
Cancelled registrations |
Displays the number of canceled registration messages for this manager |
replication-segment
replication-segment
Syntax
replication-segment [root-address ip-address] [tree-id tree-id] [inst-id instance-id] [origin {Static | PCEP | SR-Policy}] [detail]
Context
[Tree] (show>router>p2mp-sr-tree>database replication-segment)
Full Context
show router p2mp-sr-tree database replication-segment
Description
This command displays information for the replication segments in the P2MP SR tree database.
Parameters
- ip-address
-
Displays replication segment information for the root with the specified IPv4 address.
- tree-id
-
Displays replication segment information for the P2MP SR tree with the specified ID.
- instance-id
-
Displays replication segment information for the instance with the specified ID.
- origin
-
Displays information for policies created using the specified method.
- Static
-
Displays static policies.
- PCEP
-
Displays PCEP policies.
- SR-Policy
-
Displays SR policies.
- detail
-
Displays detailed information.
Platforms
All
Output
The following output is an example of P2MP SR tree database replication segment information.
Output ExampleA:swsim103>show>router>p2mp-sr-tree# database replication-segment
===============================================================================
Replication Segments
===============================================================================
Policy-name
RootAddr TreeId NumNHLFEs Instance
Origin Tunnel Down-Reason State
SID-action InLabel LTN/Local Update-ID
NhId REP-SID Down-Reason State
Nexthop Interface
ProtectNhId REP-SID Down-Reason State
Nexthop Interface
-------------------------------------------------------------------------------
rs-test-100-103
100.0.0.100 9000 1 1000
Static 73731 none inService
pop 30000 False/True 0
N/A N/A --- ---
--- ---
N/A N/A --- ---
--- ---
rs-test-100-103-spmsi
100.0.0.100 9001 0 1000
Static 0 all-nh-down outOfService
swap 30001 False/False 0
N/A N/A --- ---
--- ---
N/A N/A --- ---
--- ---
rs-test-103-100
100.0.0.103 9000 1 1000
Static 73729 none inService
push 0 True/False 0
1 30100, 0, 0, 0* none inService
102.103.1.1 to102port1-1
N/A N/A --- ---
--- ---
rs-test-spmsi-103-100
100.0.0.103 9001 1 1000
Static 0 none inService
push 0 True/False 0
1 30101, 0, 0, 0* none inService
102.103.1.1 to102port1-1
N/A N/A --- ---
--- ---
-------------------------------------------------------------------------------
Total replication segments : 4
replication-segment
Syntax
replication-segment [segment-name] [inst-id instance-id] [incoming-sid static-label] [origin { Static | PCEP | SR-Policy}] [oper { up | down}] [tree-id root-tree-id] [root-addr ip-address]
Context
[Tree] (show>router>p2mp-sr-tree replication-segment)
Full Context
show router p2mp-sr-tree replication-segment
Description
This command displays the information for the specified replication segment of the P2MP SR tree.
Parameters
- segment-name
-
Specifies the name, up to 32 characters.
- instance-id
-
Specifies the instance ID.
- static-label
-
Specifies the static label ID.
- origin
-
Displays information for policies created using the specified method.
- Static
-
Displays static policies.
- PCEP
-
Displays PCEP policies.
- SR-Policy
-
Displays SR policies.
- oper up
-
Displays replication segments with operational status up.
- oper down
-
Displays replication segments with operational status down.
- root-tree-id
-
Specifies the P2MP SR tree ID.
- ip-address
-
Specifies the root IPv4 address.
Platforms
All
Output
The following output is an example of replication segment information.
Output ExampleA:swsim103>show>router>p2mp-sr-tree# replication-segment
===============================================================================
Replication Segments
===============================================================================
Name Origin InstId NumNhIds Adm/Opr
RootAddr TreeId InSID Action
-------------------------------------------------------------------------------
rs-test-100-103 Static 1000 -- Up/Up
100.0.0.100 9000 30000 Pop
rs-test-103-100 Static 1000 1 Up/Up
100.0.0.103 9000 -- Push
rs-test-100-103-spmsi Static 1000 -- Up/Down
100.0.0.100 9001 30001 Swap
rs-test-spmsi-103-100 Static 1000 1 Up/Up
100.0.0.103 9001 -- Push
-------------------------------------------------------------------------------
Total Replication Segments : 4
request
request
Syntax
request aps-id {protect | working}
Context
[Tree] (tools>perform>aps request)
Full Context
tools perform aps request
Description
This command requests a manual switch to protection or working circuit.
Parameters
- aps-id
-
Specifies the APS ID.
- protect
-
This command requests a manual switch to a port that is acting as the protection circuit for the APS group.
- working
-
This command requests a manual switch to a port that is acting as the working circuit for this APS group.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e
requirements
requirements
Syntax
requirements [detail]
Context
[Tree] (show>chassis>power-management requirements)
Full Context
show chassis power-management requirements
Description
This command displays maximum power requirements for the installed devices.
Parameters
- detail
-
Displays detailed information.
Platforms
7750 SR-1s, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, 7750 SR-14s, 7950 XRS
Output
The following output is an example of power management requirements information, and Output Fields: show chassis power-management requirements describes the output fields.
Output Example: show chassis power-management requirements*A:Dut-A# show chassis power-management requirements
===============================================================================
Chassis Power Zone 1 Requirements
===============================================================================
SUPPLY REQUIREMENTS
Power Capacity : 88000.00 Watts Chassis/Fan : 8600.00 Watts ( 10%)
IO Module : 2028.00 Watts ( 2%)
CPM Module : 450.00 Watts ( 1%)
Fabric Module : 2120.00 Watts ( 2%)
MDA Module : 11810.00 Watts ( 13%)
XIOM Module : 1926.00 Watts ( 2%)
Mode : basic Total Required: 26934.00 Watts ( 31%)
Reserved Power : 4400.00 Watts Safety Level : 26934.00 Watts (100%)
Reqd. + Reserve : 31334.00 Watts ( 36%) Safety Alert : N/A
Remaining Power : 56666.00 Watts Alert Level : N/A
===============================================================================
*A:Dut-A# show chassis power-management requirements detail
===============================================================================
Chassis Power Zone 1 Requirements (detail)
===============================================================================
SUPPLY REQUIREMENTS
Power Capacity : 88000.00 Watts Chassis/Fan
Power Module 1/1 : 4400.00 Watts 1/1 : 1075.00 Watts ( 1%)
Power Module 1/2 : 4400.00 Watts 1/2 : 1075.00 Watts ( 1%)
Power Module 1/3 : 4400.00 Watts 1/3 : 1075.00 Watts ( 1%)
Power Module 1/4 : 4400.00 Watts 1/4 : 1075.00 Watts ( 1%)
Power Module 1/5 : 4400.00 Watts 1/5 : 1075.00 Watts ( 1%)
Power Module 1/6 : 4400.00 Watts 1/6 : 1075.00 Watts ( 1%)
Power Module 1/7 : 4400.00 Watts 1/7 : 1075.00 Watts ( 1%)
Power Module 1/8 : 4400.00 Watts 1/8 : 1075.00 Watts ( 1%)
Power Module 1/9 : 4400.00 Watts IO Module
Power Module 1/10: 4400.00 Watts Slot 1 : 551.00 Watts ( 1%)
Power Module 2/1 : 4400.00 Watts Slot 2 : 373.00 Watts ( 0%)
Power Module 2/2 : 4400.00 Watts Slot 3 : 609.00 Watts ( 1%)
Power Module 2/3 : 4400.00 Watts Slot 4 : 270.00 Watts ( 0%)
Power Module 2/4 : 4400.00 Watts Slot 5 : 225.00 Watts ( 0%)
Power Module 2/5 : 4400.00 Watts CPM Module
Power Module 2/6 : 4400.00 Watts Slot A : 225.00 Watts ( 0%)
Power Module 2/7 : 4400.00 Watts Slot B : 225.00 Watts ( 0%)
Power Module 2/8 : 4400.00 Watts Fabric Module
Power Module 2/9 : 4400.00 Watts Sfm 1 : 265.00 Watts ( 0%)
Power Module 2/10: 4400.00 Watts Sfm 2 : 265.00 Watts ( 0%)
Sfm 3 : 265.00 Watts ( 0%)
Sfm 4 : 265.00 Watts ( 0%)
Sfm 5 : 265.00 Watts ( 0%)
Sfm 6 : 265.00 Watts ( 0%)
Sfm 7 : 265.00 Watts ( 0%)
Sfm 8 : 265.00 Watts ( 0%)
MDA Module
MDA 1/1 : 1555.00 Watts ( 2%)
MDA 1/2 : 1555.00 Watts ( 2%)
MDA 2/1 : 1200.00 Watts ( 1%)
MDA 2/2 : 1200.00 Watts ( 1%)
MDA 3/1 : 2400.00 Watts ( 3%)
MDA 3/2 : 2400.00 Watts ( 3%)
MDA 4/1 : 600.00 Watts ( 1%)
MDA 4/x2/1 : 150.00 Watts ( 0%)
MDA 4/x2/2 : 150.00 Watts ( 0%)
MDA 5/x1/1 : 150.00 Watts ( 0%)
MDA 5/x1/2 : 150.00 Watts ( 0%)
MDA 5/x2/1 : 150.00 Watts ( 0%)
MDA 5/x2/2 : 150.00 Watts ( 0%)
XIOM Module
XIOM 4/x2 : 642.00 Watts ( 1%)
XIOM 5/x1 : 642.00 Watts ( 1%)
XIOM 5/x2 : 642.00 Watts ( 1%)
Mode : basic Total Required: 26934.00 Watts ( 31%)
Reserved Power : 4400.00 Watts Safety Level : 26934.00 Watts (100%)
Reqd. + Reserve : 31334.00 Watts ( 36%) Safety Alert : N/A
Remaining Power : 56666.00 Watts Alert Level : N/A
===============================================================================
|
Label |
Description |
|---|---|
|
SUPPLY |
|
|
Power Capacity |
Specifies the total amount of power available to the chassis. |
|
Safety Level |
Specifies the configured Power Safety Level, which is a percentage of the worst case power consumption level. |
|
Alert Level |
Specifies the configured power level in Watts, which causes the system to raise an alarm if the available power level drops below a set level. |
|
Mode |
Specifies the configured mode: none, basic, advanced. |
|
Reserved Power |
Signifies the amount of power in reserve. For basic and advanced modes, the system keeps an additional margin of reserve power capacity. This margin is the provisioned capacity of the highest-rated power module. In advanced mode, the system will shed load to always keep this amount of power in reserve. In basic mode, it won’t shed load to maintain the reserve, but it only allows cards or MDAs to load as long as the reserve power margin can be maintained. |
|
Reqd. + Reserve |
Specifies the Safety Level (Watts) + Reserved Power. |
|
Remaining Power |
Specifies the excess capacity. It is equal to ("Power Capacity” - "Reqd + Reserve”). |
|
REQUIREMENTS |
|
|
Fan |
Specifies the amount of power required for each fan tray. |
|
IO Module |
Specifies the amount of power required for each IO Module. |
|
CPM Module |
Specifies the amount of power required for each CPM. |
|
Fabric Module |
Specifies the amount of power required for each SFM. |
|
MDA Module |
Specifies the amount of power required for each line card. |
|
Total Required |
Specifies the total amount of power required for all system elements. |
|
Safety Level |
Specifies the percentage configured with configure system power-management power-safety-level percent. This is a percentage of the total system requirement (Total Required). The corresponding value in Watts is also shown for information. |
|
Safety Alert |
Specifies the output of configure system power-management power-safety-alert wattage. A non-zero value indicates that the user wants to receive a warning when the system power capacity drops to within this number of Watts of the system level. If the power safety is 0, "N/A” is displayed in the output since no alert will be produced. |
|
Alert Level |
Specifies the value when the safety alert will be issued (= safety-level + safety alert). If the power safety alert is 0, "N/A” is displayed in the output since no alert will be produced. |
resignal
resignal
Syntax
resignal {lsp lsp-name path path-name | delay minutes}
resignal {p2mp-lsp p2mp-lsp-name p2mp-instance p2mp-instance-name | p2mp-delay p2mp-minutes}
resignal {sr-te-lsp sr-te-lsp-name path path-name | sr-te-delay sr-te-minutes}
Context
[Tree] (tools>perform>router>mpls resignal)
Full Context
tools perform router mpls resignal
Description
This command resignals a specific path of a RSVP-TE P2P LSP, a RSVP P2MP LSP tree, or a SR-TE LSP. When an lsp-name and path-name are provided, a manual resignal is performed for the named path of the named LSP only. In this case, the new path is always programmed in data path regardless of the metric comparison between the new path and the current path.
The delay, p2mp-delay, or the sr-te-delay parameters override the global resignal timer value of all LSPs of the corresponding type for resignal. At the expiry of this override timer, the procedures of the timer based resignal are applied to all LSPs of the corresponding type. The resignal timer is then reset to its configured value in MPLS configuration. In this case, the new path is programmed in data path only if the metric of the new path is different from one of the current path.
Parameters
- lsp lsp-name
-
Specifies an existing LSP name, up to 64 characters in length, to resignal.
- path path-name
-
Specifies an existing path name to resignal.
- delay minutes
-
Configures an override of the global resignal timer or all RSVP-TE P2P LSPs.
- p2mp-lsp p2mp-lsp-name
-
Specifies an existing point-to-multipoint RSVP-TE LSP name, up to 64 characters, to resignal.
- p2mp-instance p2mp-instance-name
-
Specifies a name, up to 32 characters, that identifies the P2MP LSP instance.
- p2mp-delay p2mp-minutes
-
Configures an override of the global resignal timer or all RSVP-TE P2MP LSPs.
- sr-te-delay sr-te-minutes
-
Configures an override of the global resignal timer or all SR-TE LSPs.
- sr-te-lsp sr-te-lsp-name
-
Specifies the name of a SR-TE LSP to resignal. The name must be 64 characters maximum.
Platforms
All
resignal-bypass
resignal-bypass
Syntax
resignal-bypass {lsp bypass-lsp-name [force] | delay minutes}
Context
[Tree] (tools>perform>router>mpls resignal-bypass)
Full Context
tools perform router mpls resignal-bypass
Description
This command performs a manual re-optimization of a specific dynamic or manual bypass LSP, or of all dynamic bypass LSPs.
The name of a manual bypass LSP is the one provided by the user at configuration time. The name of a dynamic bypass LSP is shown in the output of show>router>mpls>bypass-tunnel dynamic detail.
The delay option triggers the global re-optimization of all dynamic bypass LSPs at the expiry of the specified delay. Effectively, this option forces the global bypass resignal timer to expire after an amount of time equal to the value of the delay parameter. This option has no effect on a manual bypass LSP.
However, when bypass-lsp-name is specified, the named dynamic or manual bypass LSP is signaled and the associations are moved only if the new bypass LSP path has a lower cost than the current one. This behavior is different from that of the similar command for the primary or secondary active path of an LSP, which signals and switches to the new path regardless of the cost comparison. This handling is required because a bypass LSP may have a large number of PSB associations and the processing churn is much higher.
In the specific case where the name corresponds to a manual bypass LSP, the LSP is torn down and resignaled using the new path provided by CSPF if no PSB associations exist. If one or more PSB associations exist but no PLR is active, the command fails and the user is required to explicitly enter the force option. In this case, the manual bypass LSP is torn down and resignaled, leaving temporarily the associated LSP primary paths unprotected. If one or more PLRs associated with the manual bypass LSP is active, the command fails.
Finally, and as with the timer based resignal, the PSB associations are checked for the SRLG and admin group constraints using the updated information provided by CSPF for the current path and new path of the bypass LSP.
Parameters
- lsp bypass-lsp-name [force]
-
Specifies the name of the dynamic or manual bypass LSP. The force option is required when the name corresponds to a manual bypass LSP and the LSP has PSB associations.
- delay minutes
-
Specifies the time, in minutes, MPLS waits before attempting to re-signal dynamic bypass LSP paths originated on the system.
Platforms
All
resource-failures
resource-failures
Syntax
resource-failures
Context
[Tree] (clear>router>ldp resource-failures)
Full Context
clear router ldp resource-failures
Description
This command clears resource overload status in the LDP instance.
Platforms
All
resource-usage
resource-usage
Syntax
resource-usage
Context
[Tree] (tools>dump resource-usage)
Full Context
tools dump resource-usage
Description
Commands in this context display system resource information, such as policers, including data for total, available, and free numbers for each resource.
Platforms
All
resources
resources
Syntax
resources
Context
[Tree] (tools>dump>filter resources)
Full Context
tools dump filter resources
Description
Commands in this context display filter resources utilization.
Platforms
All
resources
Syntax
resources mda mda-id
Context
[Tree] (tools>dump>nat>isa resources)
Full Context
tools dump nat isa resources
Description
This command enables dump ISA resources for an MDA.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of this command.
Output ExampleAR12_PPPOE# tools dump nat isa resources mda 3/1
Resource Usage for Slot #3 Mda #1:
| Total | Allocated | Free
-------------------------------+--------------+--------------+--------------
Flows | 6291456 | 0 | 6291456
Policies | 256 | 2 | 254
Port-ranges | 1310720 | 128 | 1310592
Ports | 12884901888 | 0 | 12884901888
IP-addresses | 65536 | 1 | 65535
Large-scale hosts | 524288 | 0 | 524288
L2-aware subscribers | 65536 | 0 | 65536
L2-aware hosts | 65536 | 0 | 65536
Delayed ICMP's | 200 | 0 | 200
ALG session | 1572864 | 0 | 1572864
LI entries | 8191 | 0 | 8191
Upstream fragment lists | 16384 | 0 | 16384
Downstream fragment lists | 16384 | 0 | 16384
Upstream fragment holes | 131072 | 0 | 131072
Downstream fragment holes | 131072 | 0 | 131072
Upstream fragment bufs | 13824 | 0 | 13824
Downstream fragment bufs | 13824 | 0 | 13824
flow log dest. set 0 | 2 | 0 | 2
flow log packets set 0 | 50 | 0 | 50
flow log dest. set 1 | 2 | 0 | 2
flow log packets set 1 | 50 | 0 | 50
flow log dest. set 2 | 1 | 0 | 1
flow log packets set 2 | 50 | 0 | 50
A:SR12_PPPOE#
resources
Syntax
resources
Context
[Tree] (show>router>bfd resources)
Full Context
show router bfd resources
Description
This command displays information about BFD resource usage.
Platforms
All
restart
restart
Syntax
restart brg-id brg-ident
Context
[Tree] (tools>perform>subscr-mgmt>pppoe-client restart)
Full Context
tools perform subscriber-mgmt vrgw brg pppoe-client restart
Description
This command forcibly restarts the PPPoE client linked to the BRG instance. The restart does not remove BRG or related session state, however, forwarding is impacted.
Parameters
- brg-ident
-
The string identifying the BRG.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
retailers
retailers
Syntax
retailers
Context
[Tree] (show>service>id retailers)
Full Context
show service id retailers
Description
This command displays service retailer information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of service retailer information.
Output Example*A:ALA-48>config# show service id 101 retailers
===============================================================================
Retailers for service 101
===============================================================================
Retailer Svc ID Num Static Hosts Num Dynamic Hosts
-------------------------------------------------------------------------------
102 3 1
105 0 1
-------------------------------------------------------------------------------
Number of retailers : 2
===============================================================================
*A:ALA-48>config#
revert
revert
Syntax
revert [lsp lsp-name]
Context
[Tree] (tools>perform>router>mpls revert)
Full Context
tools perform router mpls revert
Description
Use this command to cause a named LSP, which is currently using a secondary path and for which the revert-timer has been configured, to switch back to using the primary path. Any outstanding revert-timer is canceled.
The primary path must be up for this command to be successful.
Parameters
- lsp-name
-
Specifies an existing LSP name, up to 64 characters in length.
Platforms
All
rib-api
rib-api
Syntax
rib-api
Context
[Tree] (show>router rib-api)
Full Context
show router rib-api
Description
This command displays RIB-API protocol entities information.
Platforms
All
rib-api
Syntax
rib-api
Context
[Tree] (clear>router rib-api)
Full Context
clear router rib-api
Description
This command clears RIB-API protocol entities information.
Platforms
All
rib-api
Syntax
rib-api
Context
[Tree] (tools>dump>router rib-api)
Full Context
tools dump router rib-api
Description
This command configures the dump tools for RIB-API protocol instance.
Platforms
All
rib-api
Syntax
rib-api
Context
[Tree] (monitor>router rib-api)
Full Context
monitor router rib-api
Description
This command monitors the RIB-API protocol entities information.
Platforms
All
ring
ring
Syntax
ring peer ip-address ring sync-tag
Context
[Tree] (clear>redundancy>multi-chassis>mcr>statistics ring)
Full Context
clear redundancy multi-chassis mc-ring statistics ring
Description
This command clears multi-chassis ring statistics.
Parameters
- ip-address
-
Clears ring statistics for the specified IP address.
- sync-tag
-
Clears ring statistics for the specified sync tag. 32 characters maximum.
Platforms
All
ring-node
ring-node
Syntax
ring-node peer ip-address ring sync-tag node ring-node-name
Context
[Tree] (clear>redundancy>multi-chassis>mcr>statistics ring-node)
Full Context
clear redundancy multi-chassis mc-ring statistics ring-node
Description
This command clears multi-chassis ring statistics.
Parameters
- ip-address
-
Clears ring-node peer statistics for the specified IP address.
- sync-tag
-
Clears ring-node peer statistics for the specified synchronization tag. The tag can be up to 32 characters.
- ring-node-name
-
Clears ring-node peer statistics for the specified ring node name. The ring node name can be up to 32 characters.
Platforms
All
ring-nodes
ring-nodes
Syntax
ring-nodes peer ip-address ring sync-tag
Context
[Tree] (clear>redundancy>multi-chassis>mcr ring-nodes)
Full Context
clear redundancy multi-chassis mc-ring ring-nodes
Description
This command clears multi-chassis ring unreferenced ring nodes.
Parameters
- ip-address
-
Clears ring statistics for the specified IP address.
- sync-tag
-
Clears ring statistics for the specified sync tag.
Platforms
All
rip
rip
Syntax
rip
Context
[Tree] (clear>router rip)
Full Context
clear router rip
Description
Commands in this context clear and reset RIP protocol entities.
Platforms
All
rip
Syntax
rip
Context
[Tree] (show>router rip)
Full Context
show router rip
Description
Displays RIP information.
Platforms
All
rip
Syntax
rip
Context
[Tree] (monitor>router rip)
Full Context
monitor router rip
Description
This command monitors commands for the RIP instance.
Platforms
All
rip-policy
rip-policy
Syntax
rip-policy
rip-policy rip-policy-name [association]
Context
[Tree] (show>subscr-mgmt rip-policy)
Full Context
show subscriber-mgmt rip-policy
Description
This command displays RIP policy information.
Parameters
- rip-policy-name
-
Specifies the RIP policy name, up to 32 characters.
- association
-
Displays information associated with the RIP policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
ripng
ripng
Syntax
ripng
Context
[Tree] (clear>router ripng)
Full Context
clear router ripng
Description
Commands in this context clear and reset RIP-NG protocol entities.
Platforms
All
ripng
Syntax
ripng
Context
[Tree] (show>router ripng)
Full Context
show router ripng
Description
Commands in this context display RIP-NG related information.
Platforms
All
ripng
Syntax
ripng
Context
[Tree] (monitor>router ripng)
Full Context
monitor router ripng
Description
This command monitors commands for the RIP instance.
Platforms
All
rollback
rollback
Syntax
rollback [rescue]
Context
[Tree] (show>system rollback)
Full Context
show system rollback
Description
This command displays rollback configuration and state.
Parameters
- rescue
-
Specifies the rescue configuration.
Platforms
All
Output
This command displays classic CLI rollback file and checkpoint information.
This command is not available in the MD-CLI. Use the MD-CLI show system management-interface commit-history command.
A:dut-a_a># show system rollback
===============================================================================
Rollback Information
===============================================================================
Rollback Location : cf1:/Rollback
Save
Last Rollback Save Result : In Progress, Successful or Failed
Last Save Completion Time : 10/15/2010 21:24:06
Revert
In Progress : Yes, No
Last Revert Initiated Time : 10/15/2010 21:26:23
Last Revert Initiated User : xyz
Last Initiated Checkpoint : cf1:/Rollback.rb.3
Last Completed Revert Result : Successful or Failed
Last Revert Completion Time : 10/15/2010 21:27:19
================================================================================
Rollback Files
================================================================================
Idx Suffix Creation time Release User
Comment
--------------------------------------------------------------------------------
latest .rb 2010/10/15 21:24:02 9.0.R4 fred
This checkpoint was saved after the 3 VPLS services were created
1 .rb.1 2010/10/15 21:23:58 9.0.R4 John
John’s checkpoint on Sunday
2 .rb.2 2010/10/15 21:23:52 9.0.R4 admin
A long checkpoint comment that an operator is using to summarize
various some of the changes that were made. They may even have so
much to say that they use the maximum comment size. Notice that
words are not chopped.
…
9 .rb.9 2010/10/14 22:00:01 9.0.R4 admin
VPLS services 1000-2000 created
…
53 .rb.53 2010/10/14 22:10:10 9.0.R4 admin
--------------------------------------------------------------------------------
No. of Rollback Files: 10
================================================================================
root-objects
root-objects
Syntax
root-objects
Context
[Tree] (show>service>dynsvc root-objects)
Full Context
show service dynamic-services root-objects
Description
This command displays the root objects created by dynamic data services.
This command is not available in the MD-CLI.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of dynamic services root object information.
Output Example# show service dynamic-services root-objects
===============================================================================
Dynamic Service Root Objects
===============================================================================
OID prefix : svcRowStatus
OID index : .100000
Snippet name : vprn
Snippet instance : VRF-1
Orphan time : N/A
-------------------------------------------------------------------------------
No. of Root Objects: 1
===============================================================================
Root Objects Field Descriptions describes the Root Objects fields.
|
Output field |
Description |
|---|---|
|
OID prefix |
The corresponding SNMP OID prefix for this root object. |
|
OID index |
The corresponding SNMP OID index for this root object. |
|
Snippet name |
The name of the python function that created this root object. The name is set to N/A when the root-object is orphaned. |
|
Snippet instance |
The instance for which the python function with "Snippet name” created this root object. If the snippet is a result from a dynamic reference, then the snippet instance is the reference-id string passed in the dyn.reference(). If the snippet is not the result from a dynamic reference, then the snippet instance is the dynamic data service SAP-ID. The instance is set to N/A when the root object is orphaned. |
|
Orphan time |
The timestamp when the root-object became orphaned (root-object not deleted when corresponding teardown function is called) or N/A if the root-object is not orphaned. |
route
route
Syntax
route [family] [ip-prefix/prefix-length] [detail]
route next-hop {ip-address | ipv6-address} [detail]
Context
[Tree] (show>router>rib-api route)
Full Context
show router rib-api route
Description
This command displays RIB-API route information.
Parameters
- family
-
Specifies the IPv4 or IPv6 address route family.
- ip-prefix/prefix-length
-
Displays RIB-API route entries only matching the specified IP prefix and length.
- detail
-
Displays detailed RIB-API route information.
- ip-address
-
Specifies the next-hop IPv4 address of the RIB-API route.
- ipv6-address
-
Specifies the next-hop IPv6 address of the RIB-API route.
Platforms
All
Output
The following output is an example of RIB-API route information.
Output Example*A:Dut-A# /show router rib-api route
==============================================================================
RibApi Route Table (Router: Base) Family: IPv4
==============================================================================
Prefix Rib-Api Client IP Act
Next Hop Pref
------------------------------------------------------------------------------
100.0.0.0/8 182 10.254.135.92 N
10.20.1.3
101.0.0.0/8 182 10.254.135.92 Y
10.21.1.3
------------------------------------------------------------------------------
No. of Rib-Api Routes: 2
==============================================================================
*A:Dut-A# /show router rib-api route detail
===============================================================================
RibApi Route Table (Router: Base) Family: IPv4
===============================================================================
Prefix : 100.0.0.0/8
Client IP : 10.254.135.92
Client Tag : 4 Stale client : N
Metric : 61130 RTM Preference : 171
Rib-Api Pref : 182
Last Updated : 02/07/2020 23:44:17
Nexthop : 10.20.1.3
Active In RTM : N
Inactive Reason : Next-hop not resolved or no usable tunnels
-------------------------------------------------------------------------------
Prefix : 101.0.0.0/8
Client IP : 10.254.135.92
Client Tag : 4 Stale client : N
Metric : 61130 RTM Preference : 171
Rib-Api Pref : 182
Last Updated : 02/07/2020 23:44:44
Nexthop : 10.21.1.3
Active In RTM : Y
Inactive Reason : Not Applicable
-------------------------------------------------------------------------------
No. of Rib-Api Routes: 2
===============================================================================
*A:Dut-A#
|
Label |
Description |
|---|---|
|
Family |
The route family:
|
|
Prefix |
The IP prefix for the route RTM entry |
|
Rib-Api Pref |
The RIB-API preference opposing to the routes from different clients with the same prefix |
|
Client IP |
The IP address of the gRPC client that configured the RIB-API route entry |
|
Act |
The boolean (YES or NO) that indicates whether the status of the RIB-API route in RTM is active or not |
|
Next Hop |
The next-hop IP address of the RIB-API route entry |
|
No. of Rib-Api Routes |
The total number of the displayed RIB-API routes |
|
Client Tag |
The client tag unique identifier assigned to each gRPC connection by the gRPC server |
|
Stale client |
The stale client (Y or N) that indicates if the route is from a disconnected gRPC client |
|
Metric |
The metric of the route |
|
RTM Preference |
The RTM preference opposing to the routes having the same prefix from different protocols (BGP, OSPF) |
|
Last Updated |
The time stamp of when the route was added or modified from a gRPC client |
|
Nexthop |
The next-hop IP address of the RIB-API route entry |
|
Active In RTM |
The boolean (Y or N) that indicates whether the status of the RIB-API route is active or not in RTM |
|
Inactive Reason |
The inactive reason or the route not active in RTM |
route-downloader
route-downloader
Syntax
route-downloader route-downloader-name [router router-instance | service-name service-name] [family family]
Context
[Tree] (clear>aaa route-downloader)
Full Context
clear aaa route-downloader
Description
This command clears all the radius-downloaded routes from the internal downloader cache (or protocol RIB/db) (and thus eventually from the RTM itself). The parameters vprn and/or family allow to restrict the deletion of those routes learned in a particular address family (IPv4 or IPv6) and/or a particular VPRN.
By default, all VPRNs and both IPv4 and IPv6 families are affected.
Clearing the internal protocol DB means the corresponding prefixes that were deleted should be removed from the RTM (and from any other exports) as well.
Parameters
- route-downloader-name
-
Specifies the route downloader name, up to 32 characters.
- router-instance
-
Specifies the router instance name (Base) or service ID.
- service-name
-
Specifies the configured service name for the routing instance, up to 64 characters
- family
-
Specifies to limit he removal or prefixes only belonging to the address family IPv4 or IPv6. Only these two values are accepted.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
route-downloader
Syntax
route-downloader
Context
[Tree] (tools>perform>aaa route-downloader)
Full Context
tools perform aaa route-downloader
Description
Commands in this context configure route downloader parameters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
route-downloader
Syntax
route-downloader [route-downloader-name]
route-downloader route-downloader-name statistics
Context
[Tree] (show>aaa route-downloader)
Full Context
show aaa route-downloader
Description
This command displays RADIUS route downloader information.
Parameters
- route-downloader-name
-
Specifies the route downloader name, up to 32 characters.
- statistics
-
Displays RADIUS route downloader information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
route-next-hop-policy
route-next-hop-policy
Syntax
route-next-hop-policy
Context
[Tree] (show>router route-next-hop-policy)
Full Context
show router route-next-hop-policy
Description
This command displays route next-hop policies related information.
Platforms
All
route-table
route-table
Syntax
route-table [family] [ip-prefix[/prefix-length] [longer | exact | protocol protocol-name] [instance instance-id] [all] [next-hop-type type] [qos] [alternative] [accounting-class]
route-table [family] [summary]
route-table tunnel-endpoints [ip-prefix [/prefix-length] [longer | exact] [detail]
route-table [family] [ip-prefix[/prefix-length] [longer | exact | protocol protocol-name] [instance instance-id] [extensive [all]
Context
[Tree] (show>router route-table)
Full Context
show router route-table
Description
This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
- family
-
Displays the specified family.
- ip-prefix[/prefix-length]
-
Displays routes only matching the specified ip-prefix and optional mask.
- longer
-
Displays routes matching the ip-prefix/mask and routes with longer masks.
- exact
-
Displays the exact route matching the ip-prefix/mask.
- protocol-name
-
Displays routes learned from the specified protocol.
- instance-id
-
Specifies the IGP instance of the route table.
- all
-
Displays all routes, including inactive routes.
- type
-
Displays only the tunneled next-hops. For each route entry, the tunnel owner and tunnel ID is shown.
- qos
-
Displays QoS active routes in the routing table.
- alternative
-
Displays LFS and backup route details.
- accounting-class
-
Displays accounting class information.
Note:Not all platforms support this parameter.
- summary
-
Displays route table summary information.
- tunnel-endpoints
-
Displays tunnel endpoint information.
- extensive
-
Displays detailed information.
Platforms
All
Output
The following output are examples of route table information, and Standard Show Route Table Field Descriptions describes the output fields.
Output Example Standard Route Table InformationThe following output shows standard route table information.
*A:ALA-12# show router 3 route-table 10.10.0.4
===============================================================================
Route Table
==============================================================================
Dest Address Next Hop Type Protocol Age Metric Pref
------------------------------------------------------------------------------
10.10.0.4/32 10.10.34.4 Remote OSPF 3523 1001 10
------------------------------------------------------------------------------
*A:ALA-12#
*A:ALA-12# show router 3 route-table 10.10.0.4/32 longer
==============================================================================
Route Table
==============================================================================
Dest Address Next Hop Type Protocol Age Metric Pref
------------------------------------------------------------------------------
10.10.0.4/32 10.10.34.4 Remote OSPF 3523 1001 10
------------------------------------------------------------------------------
No. of Routes: 1
==============================================================================
+ : indicates that the route matches on a longer prefix
*A:ALA-12#
*A:ALA-12# show router 3 route-table protocol ospf
==============================================================================
Route Table
==============================================================================
Dest Address Next Hop Type Protocol Age Metric Pref
------------------------------------------------------------------------------
10.10.0.1/32 10.10.13.1 Remote OSPF 65844 1001 10
10.10.0.2/32 10.10.13.1 Remote OSPF 65844 2001 10
10.10.0.4/32 10.10.34.4 Remote OSPF 3523 1001 10
10.10.0.5/32 10.10.35.5 Remote OSPF 1084022 1001 10
10.10.12.0/24 10.10.13.1 Remote OSPF 65844 2000 10
10.10.15.0/24 10.10.13.1 Remote OSPF 58836 2000 10
10.10.24.0/24 10.10.34.4 Remote OSPF 3523 2000 10
10.10.25.0/24 10.10.35.5 Remote OSPF 399059 2000 10
10.10.45.0/24 10.10.34.4 Remote OSPF 3523 2000 10
-------------------------------------------------------------------------------
*A:ALA-12#
*A:ALA-12# show router 3 route-table summary
===============================================================================
Route Table Summary
===============================================================================
Active Available
-------------------------------------------------------------------------------
Static 1 1
Direct 6 6
BGP 0 0
OSPF 9 9
ISIS 0 0
RIP 0 0
Aggregate 0 0
-------------------------------------------------------------------------------
Total 15 15
===============================================================================
*A:ALA-12#
|
Label |
Description |
|---|---|
|
Dest Address |
The route destination address and mask |
|
Next Hop [Interface Name] |
The next hop interface name |
|
Next Hop |
The next hop IP address for the route destination |
|
Type |
Local — The route is a local route Remote — The route is a remote route |
|
Protocol |
The protocol through which the route was learned |
|
Age |
The route age in seconds for the route |
|
Metric |
The route metric value for the route |
|
Pref |
The route preference value for the route |
|
No. of Routes |
The number of routes displayed in the list |
The following output is an example showing that NAT routes are visible in the routing table.
*A:Dut-C# /show router 101 route-table
===============================================================================
Route Table (Service: 101)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
11.11.11.0/24 Local Local 00h22m33s 0
toIxia2.101 0
160.0.0.0/16 Remote Static 00h22m30s 5
11.11.11.8 1
200.0.0.0/16 Remote NAT 00h02m20s 0
NAT inside 0
200.1.0.0/16 Remote NAT 00h02m20s 0
NAT inside 0
210.0.1.0/24 Remote NAT 00h02m20s 0
NAT inside 0
210.1.1.0/24 Remote NAT 00h02m20s 0
NAT inside 0
210.6.1.0/24 Remote NAT 00h02m20s 0
NAT inside 0
210.7.1.0/24 Remote NAT 00h02m20s 0
NAT inside 0
-------------------------------------------------------------------------------
No. of Routes: 8
Flags: n = Number of times nexthop is repeated
B = BGP backup route available
L = LFA nexthop available
S = Sticky ECMP requested
===============================================================================
*A:Dut-C#
The following output is an example of a VPRN on the standby PE for prefix 10.13.1.0/24.
*A:ALA-12# show router 1 route-table 10.13.1.0/24 all
===============================================================================
Route Table (Service: 1)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Active Metric
-------------------------------------------------------------------------------
10.13.1.0/24 [E] Remote BGP 00h01m44s 170
10.3.1.1 N 0
10.13.1.0/24 Remote BGP VPN 00h01m19s 170
10.15.1.100 (tunneled) Y 0
===============================================================================
The following are output examples for an IP address.
*A:ALA-12# show router 1 route-table 4.4.1.4/32
===============================================================================
Route Table (Service: 1)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
4.4.1.4/32 Remote BGP VPN 00h00m03s 170
3ffe::a14:102 (tunneled:SR-Policy:917546) 0
-------------------------------------------------------------------------------
*A:ALA-12# show router 1 route-table 3FFE::404:104/128
===============================================================================
IPv6 Route Table (Service: 1)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
3ffe::404:104/128 Remote BGP VPN 00h00m07s 170
3ffe::a14:102 (tunneled:SR-Policy:917546) 0
-------------------------------------------------------------------------------
No. of Routes: 1
Flags: n = Number of times nexthop is repeated
B = BGP backup route available
L = LFA nexthop available
S = Sticky ECMP requested
===============================================================================
*A:ALA-12# show router route-table 180.10.0.1/32
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
180.10.0.1/32 [B][S] Remote BGP 00h00m49s 170
10.10.10.1 0
180.10.0.1/32 [B][S] Remote BGP 00h00m49s 170
10.10.10.5 0
180.10.0.1/32 [B][S] Remote BGP 00h00m49s 170
10.10.10.10 0
-------------------------------------------------------------------------------
No. of Routes: 1
Flags: n = Number of times nexthop is repeated
B = BGP backup route available
L = LFA nexthop available
S = sticky ECMP requested
==============================================================================
The following output is an example of the extensive output with unequal-cost ECMP BGP routes.
*A:vRR>config>router# show router route-table extensive 200.200.200.200/32
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix : 200.200.200.200/32
Protocol : BGP
Age : 01h20m41s
Preference : 170
Indirect Next-Hop : 10.0.0.2
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 9
Resolving Next-Hop : 10.0.0.2
Interface : to_bridge_br2
Metric : 0
ECMP-Weight : N/A
Indirect Next-Hop : 192.0.2.2
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 5
Resolving Next-Hop : 192.0.2.2
Interface : to_bridge_br3
Metric : 0
ECMP-Weight : N/A
-------------------------------------------------------------------------------
No. of Destinations: 1
===============================================================================
*A:vRR>config>router# show router route-table 5.3.0.1/32 extensive
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix : 5.3.0.1/32
Protocol : BGP
Age : 00h00m59s
Preference : 170
Indirect Next-Hop : 10.0.0.1
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
Resolving Next-Hop : 1.0.0.2 (RSVP tunnel:115)
Metric : 10
ECMP-Weight : 1
Resolving Next-Hop : 1.0.0.2 (RSVP tunnel:61443)
Metric : 10
ECMP-Weight : 1
Indirect Next-Hop : 10.0.0.2
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 30
Resolving Next-Hop : 1.0.0.3 (RSVP tunnel:94)
Metric : 10
ECMP-Weight : 20
Resolving Next-Hop : 1.0.0.3 (RSVP tunnel:61442)
Metric : 10
ECMP-Weight : 1
-------------------------------------------------------------------------------
No. of Destinations: 1
===============================================================================
route-target
route-target
Syntax
route-target [source-as as-number] [brief] [ aspath-regex reg-exp] [community comm-id]
route-target [rtc-prefix rtc-prefix] [hunt] [ brief] [aspath-regex reg-exp] [ community comm-id]
route-target rtc-prefix rtc-prefix [aspath-regex reg-exp] [community comm-id]
route-target [rtc-prefix rtc-prefix] [detail | longer] [aspath-regex reg-exp] [community comm-id]
Context
[Tree] (show>router>bgp>routes route-target)
Full Context
show router bgp routes route-target
Description
This command displays BGP route target routes.
Parameters
- as-number
-
Specifies the source AS number.
- rtc-prefix
-
Filters the route-target constraint routes to include only those routes matching a specific NLRI string.
- detail
-
Displays detailed information.
- longer
-
Displays the specified route and subsets of the route.
- reg-exp
-
Displays routes matching the specified regular expression, up to 80 characters.
- comm-id
-
Specifies the community ID, up to 72 characters.
Platforms
All
router
router
Syntax
router [router-instance]
router service-name service-name
Context
[Tree] (show router)
Full Context
show router
Description
Commands in this context display various types of information for the specified router instance.
Parameters
- router-instance
-
specifies the router name, CPM router instance, or VPRN service ID.
- service-name
-
specifies the service name, up to 64 characters.
Platforms
All
Output
The following outputs are examples of router information.
Output Example: show router with PIM and S-PMSI*A:Dut-D# \show router 100 pim s-pmsi
===============================================================================
PIM RSVP Spmsi tunnels
===============================================================================
===============================================================================
P2mp ID Tunnel ID Ext Tunnel Adrs SPMSI Index Num VPN State
SGs
-------------------------------------------------------------------------------
100 61442 10.20.1.4 73919 8 UP
===============================================================================
PIM RSVP Spmsi Interfaces : 1
===============================================================================
*A:Dut-D# \show router 100 pim s-pmsi detail
===============================================================================
PIM RSVP Spmsi tunnels
===============================================================================
P2MP ID : 100 Tunnel ID : 61442
Ext Tunnel Addrs : 10.20.1.4 Spmsi IfIndex : 73919
Number of VPN SGs : 8 Up Time : 0d 00:01:04
VPN Group Address : 203.0.113.0
VPN Source Address : 10.114.1.2
Up Time : 0d 00:01:04 Multistream-Id : 10
State : TX Joined Mdt Threshold : N/A
Join Timer : N/A Holddown Timer : 0d 00:00:54
VPN Group Address : 203.0.113.1
VPN Source Address : 10.114.1.2
Up Time : 0d 00:01:04 Multistream-Id : 10
State : TX Joined Mdt Threshold : N/A
Join Timer : N/A Holddown Timer : 0d 00:00:55
VPN Group Address : 203.0.113.2
VPN Source Address : 10.114.1.2
Up Time : 0d 00:01:04 Multistream-Id : 5
State : TX Joined Mdt Threshold : N/A
Join Timer : N/A Holddown Timer : 0d 00:00:53
The allow-sr-over-sr-te flag indicates that the SR-TE LSP is eligible as IGP shortcut in SR-MPLS.
*A:Dut-C>...mpls>lsp# show router tunnel-table protocol sr-te detail
===============================================================================
Tunnel Table (Router: Base)
===============================================================================
Destination : 10.20.1.6/32
NextHop : 1.0.13.1 (524291, ospf (0))
Tunnel Flags : is-over-tunnel entropy-label-capable allow-sr-over-sr-te
Age : 00h01m12s
CBF Classes : (Not Specified)
Owner : sr-te Encap : MPLS Tunnel
ID : 655366 Preference : 8
Tunnel Label : 524287 Tunnel Metric : 200
Tunnel MTU : 1548 Max Label Stack : 4
LSP Weight : 0
-------------------------------------------------------------------------------
Number of tunnel-table entries : 1
Number of tunnel-table entries with LFA : 0
===============================================================================router
Syntax
router [router-instance]
router service-name service-name
Context
[Tree] (tools>dump router)
Full Context
tools dump router
Description
This command dumps tools for the router instance.
Parameters
- router-instance
-
Specifies the router name or service ID used to identify the router instance.
- service-name
-
Specifies the service name used to identify the router instance. 64 characters maximum.
Platforms
All
router
Syntax
router [router-instance]
router service-name service-name
Context
[Tree] (clear router)
Full Context
clear router
Description
Clear router commands affect the router instance in which they are entered.
Parameters
- router-instance
-
Specifies the router name or service ID used to identify the router instance.
- service-name
-
Specifies the service name used to identify the router instance. 64 characters maximum.
Platforms
All
router
Syntax
router
Context
[Tree] (tools>perform router)
Full Context
tools perform router
Description
This command enables the tools for the router instance.
Platforms
All
router
Syntax
router [router-instance]
router service-name service name
Context
[Tree] (monitor router)
Full Context
monitor router
Description
Commands in this context configure criteria to monitor statistical information for a variety of routing protocols.
Parameters
- router-instance
-
Specifies the router name or service ID.
- service-name
-
Specifies the service name used to identify the router instance. The name can be up to 64 characters long.
Platforms
All
router
Syntax
router [Base] [security-policy-id security-policy-id]
Context
[Tree] (show>ipsec>security-policy router)
Full Context
show ipsec security-policy router
Description
This command displays IPsec security policy information for the router.
Parameters
- security-policy-id
-
Specifies the security policy ID.
Platforms
VSR
router-advertisement
router-advertisement
Syntax
router-advertisement
Context
[Tree] (clear>router>autoconfigure router-advertisement)
Full Context
clear router autoconfigure router-advertisement
Description
Commands in this context clear router advertisement information.
Platforms
7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-2e, 7750 SR-s
router-advertisement
Syntax
router-advertisement all
router-advertisement interface interface-name
Context
[Tree] (clear>router router-advertisement)
Full Context
clear router router-advertisement
Description
This command clears all router advertisement counters.
Parameters
- all
-
Clears all router advertisement counters for all interfaces.
- interface-name
-
Clears router advertisement counters for the specified interface.
Platforms
All
router-advertisement
Syntax
router-advertisement
router-advertisement routes
Context
[Tree] (show>router>autoconfigure router-advertisement)
Full Context
show router autoconfigure router-advertisement
Description
This command displays router advertisement information.
Parameters
- routes
-
Displays routes received from router advertisements.
Platforms
7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-2e, 7750 SR-s
router-advertisement-policy
router-advertisement-policy
Syntax
router-advertisement-policy [name]
Context
[Tree] (show>subscr-mgmt router-advertisement-policy)
Full Context
show subscriber-mgmt router-advertisement-policy
Description
This command displays IPv6 router advertisement policy information.
Parameters
- name
-
Specifies the router advertisement policy name, up to 32 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
routes
routes
Syntax
routes
Context
[Tree] (show>service>id>spb routes)
Full Context
show service id spb routes
Description
This command displays SPB route information.
Platforms
All
Output
The following output is an example of service SPB route information.
Output Example*A:Dut-A# show service id 100001 spb routes
================================================================
MAC Route Table
================================================================
Fid MAC Ver. Metric
NextHop If SysID
----------------------------------------------------------------
Fwd Tree: unicast
----------------------------------------------------------------
1 00:10:00:01:00:02 10 10
sap:1/2/2:1.1 Dut-B
1 00:10:00:01:00:03 10 10
sap:1/2/3:1.1 Dut-C
1 00:10:00:01:00:04 10 20
sap:1/2/2:1.1 Dut-B
100 00:10:00:02:00:02 10 10
sap:1/2/2:1.1 Dut-B
100 00:10:00:02:00:03 10 10
sap:1/2/3:1.1 Dut-C
100 00:10:00:02:00:04 10 20
sap:1/2/3:1.1 Dut-C
Fwd Tree: multicast
----------------------------------------------------------------
1 00:10:00:01:00:02 10 10
sap:1/2/2:1.1 Dut-B
1 00:10:00:01:00:03 10 10
sap:1/2/3:1.1 Dut-C
1 00:10:00:01:00:04 10 20
sap:1/2/2:1.1 Dut-B
100 00:10:00:02:00:02 10 10
sap:1/2/2:1.1 Dut-B
100 00:10:00:02:00:03 10 10
sap:1/2/3:1.1 Dut-C
100 00:10:00:02:00:04 10 20
sap:1/2/3:1.1 Dut-C
----------------------------------------------------------------
No. of MAC Routes: 12
================================================================
================================================================
ISID Route Table
================================================================
Fid ISID Ver.
NextHop If SysID
----------------------------------------------------------------
1 10001 10
sap:1/2/2:1.1 Dut-B
sap:1/2/3:1.1 Dut-C
100 10002 10
sap:1/2/2:1.1 Dut-B
sap:1/2/3:1.1 Dut-C
----------------------------------------------------------------
No. of ISID Routes: 2
================================================================
A:Dut-A# show service id spb fate-sharing
===============================================================================
User service fate-shared sap/sdp-bind information
===============================================================================
Control Control Sap/ FID User User Sap/
SvcId SdpBind SvcId SdpBind
-------------------------------------------------------------------------------
500 1/1/20:500 502 502 1/1/20:502
===============================================================================
routes
Syntax
routes [ip-prefix] [detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id [hunt]]
routes brief
routes [ip-prefix] bgp-ls [ipv4-prefix | link | node] [hunt]
routes [ip-prefix] evpn auto-disc [as-path-regex reg-exp] [community comm-id] [esi esi] [next-hop ip-address] [rd rd] [tag tag] [detail | hunt]
routes [ip-prefix] evpn eth-seg [as-path-regex reg-exp] [community comm-id] [esi esi] [next-hop ip-address] [originator-ip ip-address] [rd rd] [tag tag] [detail | hunt]
routes [ip-prefix] evpn incl-mcast [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [originator-ip ip-address] [rd rd] [tag tag] [detail | hunt]
routes [ip-prefix] evpn ip-prefix [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [prefix ipv4-prefix] [rd rd] [tag tag] [detail | hunt]
routes [ip-prefix] evpn ipv6-prefix [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [prefix ipv6-prefix] [rd rd] [tag tag] [detail | hunt]
routes [ip-prefix] evpn mac [as-path-regex reg-exp] [community comm-id] [mac-address mac-address] [next-hop ip-address] [rd rd] [tag tag] [detail | hunt]
routes [ip-prefix] evpn mcast-join-synch [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [originator-ip ip-address] [rd rd] [tag tag] [detail | hunt]
routes [ip-prefix] evpn mcast-leave-synch [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [originator-ip ip-address] [rd rd] [tag tag] [detail | hunt]
routes [ip-prefix] smet [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [originator-ip ip-address] [rd rd] [tag tag] [detail | hunt]
routes [ip-prefix] flow-ipv4 [as-path-regex reg-exp] [community comm-id] [hunt]
routes [ip-prefix] flow-ipv6 [as-path-regex reg-exp] [community comm-id] [hunt]
routes [ip-prefix] ipv4 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [community comm-id] [leakable] [leaked] [origin-val origin-val]
routes [ip-prefix] ipv6 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [all] [as-path-regex reg-exp] [community comm-id] [leakable] [leaked] [origin-val origin-val]
routes [ip-prefix] l2-vpn [as-path-regex reg-exp] [brief] [community comm-id] [hunt] [offset vpls-base-offset] [rd rd] [siteid site-id] [veid veid]
routes [ip-prefix] l2-vpn l2vpn-type [as-path-regex reg-exp] [brief] [community comm-id] [offset vpls-base-offset] [rd rd] [siteid site-id] [veid veid]
routes [ip-prefix] label-ipv4 [brief | detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id] [leakable] [leaked] [origin-val origin-val]
routes [ip-prefix] label-ipv6 [brief | detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id] [leakable] [leaked] [origin-val origin-val]
routes [ip-prefix] mcast-ipv4 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [community comm-id]
routes [ip-prefix] mcast-ipv6 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [community comm-id]
routes [ip-prefix] mcast-vpn-ipv4 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [community comm-id] [rd rd]
routes [ip-prefix] mcast-vpn-ipv6 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [community comm-id] [rd rd]
routes [ip-prefix] mdt-safi [brief | detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id] [grp-address mcast-grp-address] [rd rd] [source-ip ip-address]
routes [ip-prefix] ms-pw [brief] [hunt] [as-path-regex reg-exp] [community comm-id] [aii-type2 aii-type2] [rd rd]
routes [ip-prefix] mvpn-ipv4 [brief | detail | longer | hunt] [as-path-regex reg-exp] [community comm-id] [group-ip ip-address] [originator-ip ip-address] [rd rd] [source-as as-number] [ source-ip ip-address] [type mvn-type]
routes [ip-prefix] mvpn-ipv6 [brief | detail | longer | hunt] [as-path-regex reg-exp] [community comm-id] [group-ip ip-address] [originator-ip ip-address] [rd rd] [source-as as-number] [source-ip ip-address] [type mvn-type]
routes [ip-prefix] route-target [brief] [ as-path-regex reg-exp] [community comm-id] [source-as as-number]
routes [ip-prefix] route-target [rtc-prefix rtc-prefix] [detail | longer | hunt [ brief]] [as-path-regex reg-exp] [community comm-id]
routes [ip-prefix] sr-policy-ipv4 [hunt] [rd rd] [color number] [endpoint ipv4-address]
routes [ip-prefix] sr-policy-ipv6 [hunt] [rd rd] [color number] [endpoint ipv6-address]
routes [ip-prefix] vpn-ipv4 [brief | detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id] [rd rd]
routes [ip-prefix] vpn-ipv6 [brief | detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id] [rd rd]
Context
[Tree] (show>router>bgp routes)
Full Context
show router bgp routes
Description
This command displays routes in the BGP Routing Information Base (RIB). When this command is issued without any command options, the output displays all learned BGP routes belonging to the IPv4 address family. When this command is issued with other parameters, the output can display a narrower or wider set of routes, including routes belonging to other address families.
Parameters
- bgp-ls
-
Displays BGP-LS routes.
- bgp-ls ipv4-prefix
-
Displays BGP-LS IPv4-prefix NLRI routes.
- bgp-ls link
-
Displays BGP-LS link NLRI routes.
- bgp-ls node
-
Displays BGP-LS node NLRI routes.
- evpn auto-disc
-
Displays EVPN autodiscovery routes.
- evpn eth-seg
-
Displays EVPN Ethernet Segment (ES) routes.
- evpn incl-mcast
-
Displays EVPN IMET routes.
- evpn ip-prefix
-
Displays EVPN IP prefix routes (type 5).
- evpn ipv6-prefix
-
Displays EVPN IPv6 prefix routes (type 5).
- evpn mac
-
Displays EVPN MAC routes (type 2).
- evpn mcast-join-synch
-
Displays EVPN multicast join sync routes.
- evpn mcast-join-leave
-
Displays EVPN multicast join leave routes.
- evpn smet
-
Displays EVPN SMET routes.
- flow-ipv4
-
Displays IPv4 flow-spec routes.
- flow-ipv6
-
Displays IPv6 flow-spec routes.
- ipv4
-
Displays unlabeled unicast IPv4 routes.
- ipv6
-
Displays unlabeled unicast IPv6 routes.
- l2-vpn
-
Displays BGP-VPLS, BGP-VPWS, BGP multihoming and BGP-AD routes (or some subset).
- label-ipv4
-
Displays labeled-unicast IPv4 routes (AFI1, SAFI4).
- label-ipv6
-
Displays labeled-unicast IPv6 routes (AFI2, SAFI4).
- mcast-ipv4
-
Displays multicast IPv4 routes (AFI1, SAFI2).
- mcast-ipv6
-
Displays multicast IPv6 routes (AFI2, SAFI2).
- mcast-vpn-ipv4
-
Displays multicast VPN IPv4 routes.
- mcast-vpn-ipv6
-
Displays multicast VPN IPv6 routes.
- mdt-safi
-
Displays MVPN MDT SAFI routes.
- ms-pw
-
Displays multisegment pseudowire routes.
- mvpn-ipv4
-
Displays MVPN IPv4 routes.
- mvpn-ipv6
-
Displays MVPN IPv6 routes.
- route-target
-
Displays RT constraint routes.
- sr-policy-ipv4
-
Displays BGP segment routing policy routes (IPv4 endpoint).
- sr-policy-ipv6
-
Displays BGP segment routing policy routes (IPv6 endpoint).
- vpn-ipv4
-
Displays unicast IPv4 VPN routes (AFI1, SAFI128).
- vpn-ipv6
-
Displays unicast IPv6 VPN routes (AFI2, SAFI128).
- brief
-
Displays summary information about the BGP routes.
- detail
-
Displays detailed information about the BGP routes, including information about the original path attribute values.
- hunt
-
Displays detailed information about the BGP routes, including information about the advertised routes (RIB-OUT).
- longer
-
When used within a command that also provides a specific IP prefix value, this filters the output to include all routes that match the prefix with the same or a longer prefix length.
- as-path-regex
-
Filters the BGP routes to include only those routes with an AS path matching the specified regular expression.
- community
-
Filters the BGP routes to include only those routes with a community value matching the specified value.
- all
-
Includes active routes of other (non-BGP) protocols that BGP has imported into its RIB.
- leakable
-
Filters the BGP routes to include only those routes that have been marked as leakable to other BGP instances (by means of a BGP import policy).
- leaked
-
Filters the BGP routes to include only those routes that have been leaked from other BGP instances (by means of a leak-import policy).
- original-val
-
Filters the BGP routes to include only those routes that have a specific RPKI route origin validation state (Not-Found, Valid, Invalid).
- esi
-
Filters the BGP EVPN routes to include only those routes with a specific Ethernet Segment identifier value.
- next-hop
-
Filters the BGP EVPN routes to include only those routes with a specific BGP next-hop address.
- rd
-
Filters the BGP routes to include only those routes with a specific route distinguisher value.
- tag
-
Filters the BGP EVPN routes to include only those routes with a specific administrative tag value.
- originator-ip
-
Filters the BGP EVPN or MVPN routes to include only those routes with a specific originator IP address (in the NLRI).
- prefix
-
Filters the BGP type 5 EVPN routes to include only those routes with a specific IPv4 or IPv6 prefix.
- mac-address
-
Filters the BGP type 2 EVPN routes to include only those routes that have a specific MAC address.
- grp-address
-
Filters the MDT-SAFI routes to include only those routes matching a specific multicast group address.
- source-as
-
Filters the MVPN or RT-constraint routes to include only those routes matching a specific source AS number (in the NLRI).
- source-ip
-
Filters the multicast routes to include only those routes matching a specific source address.
- group-ip
-
Filters the MVPN routes to include only those routes matching a specific group address.
- type
-
Filters the MVPN routes based on type (intra-ad, inter-ad, spmsi-ad, leaf-ad, source-ad, shared-join, source-join).
- aii-type2
-
Filters the MS-PW routes based on AII type 2 value.
- offset
-
Filters BGP-VPLS routes based on offset value.
- siteid
-
Filters BGP multi-homing routes based on the site ID value.
- veid
-
Filters BGP-VPLS routes based on VEID value.
- rtc-prefix
-
Filters the RT-constraint routes to include only those routes matching a specific NLRI string (formatted as source-as:route-target/prefix-length).
- color
-
Filters the SR policy routes to include only those routes matching a specific color value.
- endpoint
-
Filters the SR policy routes to include only those routes matching a specific endpoint address.
- mvpn-type
-
Specifies the MVPN type.
- ip-prefix
-
Specifies an IP prefix to match. For some address families this parameter has no meaning and should be omitted.
- reg-exp
-
An AS path regular expression to match routes based on their AS path attribute reg-exp, up to 80 characters.
- comm-id
-
Specifies a community value, up to 72 characters.
- rd
-
Specifies a route distinguisher value.
- veid
-
Specifies a two-byte identifier that represents the local bridging instance in a VPLS and is advertised through the BGP NLRI. This value must be lower than or equal to the max-ve-id.
- vpls-base-offset
-
Specifies a two-byte identifier advertised through the NLRI that is used to indicate which VE-ID should use the advertised NLRI at the receiving PE according to the following rule: if the offset<= local VE-ID <= offset+VBS-1 (VBS = virtual block size = 8 in our implementation), then the NLRI is processed. Otherwise, it is ignored. The NLRI with this offset is generated as soon as the first VE-ID value between (offset, offset + VBS-1) is advertised in the network.
- site-id
-
Specifies a two-byte identifier usually employed for the BGP multihoming solution. It identifies the BGP multihoming site associated with one or a set of objects (SAPs, pseudowires or combination). The site-id must be identical between the two PEs carrying the connection to the access device multihomed to the PEs.
- l2vpn-type
-
Specifies a 12-byte Virtual Switch Instance identifier (VSI-ID) type.
- rtc-prefix
-
source-as:{ip-addr:comm-val | 2byte-asnumber:ext-comm-val | 4byte-asnumber:comm-val}/prefix-length
- origin-val
-
Filters the BGP routes displayed by the command to those routes with a particular RPKI route origin validation state.
Platforms
All
Output
BGP Routes Output Fields describes the command output fields for BGP routes.
Use the following command to display information about BGP SR IPv6 policy routes.
show router bgp routes sr-policy-ipv6===============================================================================
BGP Router ID:10.20.1.1 AS:2 Local AS:2
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked, x - stale, > - best, b - backup, p - purge
Origin codes : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP SR-POLICY-v6 Routes
===============================================================================
Flag RD/Color/End Point LocalPref MED
Nexthop (Router) Path-Id IGP Cost
As-Path Label
-------------------------------------------------------------------------------
u*>i 2/20/3ffe::a14:102 100 None
::a14:102 None N/A
No As-Path
u*>i 3/30/:: 100 None
::a14:102 None N/A
No As-Path
-------------------------------------------------------------------------------
Routes : 2
===============================================================================Use the following command to display detailed information about BGP SR IPv6 policy routes, including information about the advertised routes (RIB-OUT).
show router bgp routes sr-policy-ipv6 hunt===============================================================================
BGP Router ID:10.20.1.1 AS:2 Local AS:2
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked, x - stale, > - best, b - backup, p - purge
Origin codes : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP SR-POLICY-v6 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
RD/Color/End Pt: 2/20/3ffe::a14:102
BSID/Pref/TunnType: 100001/10/sr-policy
Nexthop : ::a14:102
From : 10.20.1.3
Res. Nexthop : ::
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None IGP Cost : n/a
Connector : None
Community : color:01:10 target:10.20.1.1:0
Cluster : 10.20.1.3
Originator Id : 10.20.1.2 Peer Router Id : 10.20.1.3
Flags : Used Valid Best IGP
Route Source : Internal
AS-Path : No As-Path
Route Tag : 0
Neighbor-AS : n/a
DB Orig Val : N/A Final Orig Val : N/A
Source Class : 0 Dest Class : 0
Add Paths Send : Default
Last Modified : 00h22m45s
RD/Color/End Pt: 3/30/::
BSID/Pref/TunnType: 100002/10/sr-policy
Nexthop : ::a14:102
From : 10.20.1.3
Res. Nexthop : ::
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None IGP Cost : n/a
Connector : None
Community : color:01:10 target:10.20.1.1:0
Cluster : 10.20.1.3
Originator Id : 10.20.1.2 Peer Router Id : 10.20.1.3
Flags : Used Valid Best IGP
Route Source : Internal
AS-Path : No As-Path
Route Tag : 0
Neighbor-AS : n/a
DB Orig Val : N/A Final Orig Val : N/A
Source Class : 0 Dest Class : 0
Add Paths Send : Default
Last Modified : 00h22m42s
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 2
===============================================================================
Use the following command to display information about BGP routes matching a specific address.
show router bgp routes 10.10.10.5===============================================================================
BGP Router ID:10.20.1.3 AS:100 Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked, x - stale, > - best, b - backup, p - purge
Origin codes : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP IPv4 Routes
===============================================================================
Flag Network LocalPref MED
Nexthop (Router) Path-Id Label
As-Path
-------------------------------------------------------------------------------
u*>? 10.10.10.0/24 None None
10.20.1.4 None -
200 300
-------------------------------------------------------------------------------
Routes : 1
===============================================================================Use the following command to display detailed information about BGP-VPLS, BGP-VPWS, BGP multihoming, and BGP-AD routes.
show router bgp routes l2-vpn detail========================================================================
BGP Router ID:10.20.1.3 AS:1000 Local AS:1000
========================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
========================================================================
BGP L2VPN Routes
========================================================================
Route Type : AutoDiscovery
Route Dist. : 10.20.1.1:1
Prefix : 10.20.1.1
Nexthop : 10.20.1.1
From : 10.20.1.1
Res. Nexthop : n/a
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : 0
AIGP Metric : Not Atomic
Community : target:4455:4455 target:1.20.30.40:6543
l2-vpn/vrf-imp:100.1.200.1:65535
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.1
Flags : Used Valid Best IGP
Route Source : Internal
AS-Path : No As-Path
------------------------------------------------------------------------
PMSI Tunnel Attribute :
Tunnel-type : RSVP-TE P2MP LSP Flags : Leaf not required
MPLS Label : 0
P2MP-ID : 1001 Tunnel-ID : 61440
Extended-Tunne*: 10.20.1.1
Use the following command to display detailed information about BGP-VPLS, BGP-VPWS, BGP multihoming, and BGP-AD routes (including information about the advertised routes) that match a specific address and route distinguisher value.
show router bgp routes l2-vpn 10.20.1.1 rd 10.20.1.1:1 hunt===============================================================================
BGP Router ID:10.20.1.3 AS:None Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP L2VPN-AD Routes
===============================================================================
Route Type : AutoDiscovery
Route Dist. : 10.20.1.1:1
Prefix : 10.20.1.1
Nexthop : 10.20.1.1
From : 10.20.1.2
Res. Nexthop : n/a
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : 0
AIGP Metric : None
Connector : None
Community : target:1.20.30.40:6543
l2-vpn/vrf-imp:100.1.200.1:65535
Cluster : 1.1.1.1
Originator Id : 10.20.1.1 Peer Router Id : 10.20.1.2
Flags : Used Valid Best IGP
Route Source : Internal
AS-Path : No As-Path
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================Use the following command to display detailed information about unicast IPv4 VPN routes (including information about the advertised routes) that match a specific route distinguisher value and address.
show router bgp routes vpn-ipv4 6.6.6.6/32 rd 10.20.1.4:1 hunt===============================================================================
BGP Router ID:10.20.1.3 AS:None Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP VPN-IPv4 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network : 6.6.6.6/32
Nexthop : 10.20.1.4
Route Dist. : 10.20.1.4:1 VPN Label : 131070
Path Id : None
From : 10.20.1.4
Res. Nexthop : n/a
Local Pref. : 100 Interface Name : int_to_D
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None
Connector : None
Community : target:100:100
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.4
Fwd Class : None Priority : None
Flags : Used Valid Best Incomplete
Route Source : Internal
AS-Path : 106
VPRN Imported : 1
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================Use the following command to display detailed information about unicast IPv4 VPN routes (including information about the advertised routes) matching a specific address.
show router bgp routes vpn-ipv4 6.6.6.6/32 hunt===============================================================================
BGP Router ID:10.20.1.3 AS:None Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP VPN-IPv4 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network : 6.6.6.6/32
Nexthop : 10.20.1.4
Route Dist. : 10.20.1.4:1 VPN Label : 131070
Path Id : None
From : 10.20.1.4
Res. Nexthop : n/a
Local Pref. : 100 Interface Name : int_to_D
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None
Connector : None
Community : target:100:100
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.4
Fwd Class : None Priority : None
Flags : Used Valid Best Incomplete
Route Source : Internal
AS-Path : 106
VPRN Imported : 1
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================Use the following command to display detailed information about unicast IPv6 VPN routes (including information about the advertised routes) matching a specific address.
show router bgp routes 3FFE::606:609/128 vpn-ipv6 hunt===============================================================================
BGP Router ID:10.20.1.3 AS:None Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP VPN-IPv6 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network : 3FFE::606:609/128
Nexthop : ::FFFF:A14:104
Route Dist. : 10.20.1.4:1 VPN Label : 131070
Path Id : None
From : 10.20.1.4
Res. Nexthop : n/a
Local Pref. : 100 Interface Name : int_to_D
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None
Connector : None
Community : target:100:100
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.4
Fwd Class : None Priority : None
Flags : Used Valid Best Incomplete
Route Source : Internal
AS-Path : 106
VPRN Imported : 1
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================Use the following command to display detailed information about unicast IPv6 VPN routes (including information about the advertised routes) that match a specific route distinguisher value and address.
show router bgp routes vpn-ipv6 3FFE::606:607/128 rd 10.20.1.4:1 hunt===============================================================================
BGP Router ID:10.20.1.3 AS:None Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP VPN-IPv6 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network : 3FFE::606:607/128
Nexthop : ::FFFF:A14:104
Route Dist. : 10.20.1.4:1 VPN Label : 131070
Path Id : None
From : 10.20.1.4
Res. Nexthop : n/a
Local Pref. : 100 Interface Name : int_to_D
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None
Connector : None
Community : target:100:100
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.4
Fwd Class : None Priority : None
Flags : Used Valid Best Incomplete
Route Source : Internal
AS-Path : 106
VPRN Imported : 1
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================Use the following command to display detailed information about BGP routes (including information about the advertised routes) matching a specific address.
show router bgp routes 1.1.4.0/22 hunt===============================================================================
BGP Router ID:10.20.1.3 AS:100 Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked, x - stale, > - best, b - backup, p - purge
Origin codes : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP IPv4 Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network : 1.1.4.0/22
Nexthop : 1.1.3.1
Path Id : None
From : 1.1.3.1
Res. Protocol : LOCAL Res. Metric : 0
Res. Nexthop : 1.1.3.1
Local Pref. : None Interface Name : to_Dut-A
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None IGP Cost : 0
Connector : None
Community : No Community Members
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.1
Fwd Class : None Priority : None
Flags : Used Valid Best Incomplete In-RTM
Route Source : External
AS-Path : 65533
Route Tag : 0
Neighbor-AS : 65533
DB Orig Val : Invalid Final Orig Val : Invalid
Source Class : 0 Dest Class : 0
Add Paths Send : Default
RIB Priority : Normal
Last Modified : 00h03m17sUse the following command to display information about unlabeled unicast IPv4 routes.
show router bgp routes ipv4===============================================================================
BGP Router ID : 10.10.10.103 AS : 200 Local AS : 200
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP Routes
===============================================================================
Flag Network Nexthop LocalPref MED
VPN Label As-Path
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================Use the following to command to display detailed information about BGP routes matching a specific address.
show router bgp routes 1.1.4.0/22 detail===============================================================================
BGP Router ID:10.20.1.3 AS:100 Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked, x - stale, > - best, b - backup, p - purge
Origin codes : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP IPv4 Routes
===============================================================================
Original Attributes
Network : 1.1.4.0/22
Nexthop : 1.1.3.1
Path Id : None
From : 1.1.3.1
Res. Protocol : LOCAL Res. Metric : 0
Res. Nexthop : 1.1.3.1
Local Pref. : n/a Interface Name : to_Dut-A
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None IGP Cost : 0
Connector : None
Community : No Community Members
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.1
Fwd Class : None Priority : None
Flags : Used Valid Best Incomplete In-RTM
Route Source : External
AS-Path : 65533
Route Tag : 0
Neighbor-AS : 65533
DB Orig Val : Invalid Final Orig Val : N/A
Source Class : 0 Dest Class : 0
Add Paths Send : Default
RIB Priority : Normal
Last Modified : 00h03m35s
Modified Attributes
Network : 1.1.4.0/22
Nexthop : 1.1.3.1
Path Id : None
From : 1.1.3.1
Res. Protocol : LOCAL Res. Metric : 0
Res. Nexthop : 1.1.3.1
Local Pref. : None Interface Name : to_Dut-A
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None IGP Cost : 0
Connector : None
Community : No Community Members
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.1
Fwd Class : None Priority : None
Flags : Used Valid Best Incomplete In-RTM
Route Source : External
AS-Path : 65533
Route Tag : 0
Neighbor-AS : 65533
DB Orig Val : Invalid Final Orig Val : Invalid
Source Class : 0 Dest Class : 0
Add Paths Send : Default
RIB Priority : Normal
Last Modified : 00h03m41sUse the following command to display information about MVPN IPv4 routes.
show router bgp routes mvpn-ipv4===============================================================================
BGP Router ID:10.20.1.3 AS:200 Local AS:200
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP MVPN-IPv4 Routes
===============================================================================
Flag RouteType OriginatorIP LocalPref MED
RD SourceAS VPNLabel
Nexthop SourceIP
As-Path GroupIP
-------------------------------------------------------------------------------
u*>i Intra-Ad 10.20.1.4 100 0
1:1 - -
10.20.1.4 -
No As-Path -
u*>i Source-Ad - 100 0
1:1 - -
10.20.1.4 130.100.1.2
No As-Path 227.0.0.0
u*>i Source-Join - 100 0
1:1 200 -
10.20.1.4 150.100.1.2
No As-Path 226.0.0.0
-------------------------------------------------------------------------------
Routes : 3
===============================================================================Use the following command to display a summary of MVPN IPv4 route information.
show router bgp routes mvpn-ipv4 brief===============================================================================
BGP Router ID:10.20.1.3 AS:200 Local AS:200
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP MVPN-IPv4 Routes
===============================================================================
Flag RouteType OriginatorIP SourceIP
RD SourceAS GroupIP
-------------------------------------------------------------------------------
u*>i Intra-Ad 10.20.1.4 -
1:1 - -
u*>i Source-Ad - 130.100.1.2
1:1 - 227.0.0.0
u* >i Source-Join - 150.100.1.2
1:1 200 226.0.0.0
-------------------------------------------------------------------------------
Routes : 3
===============================================================================Use the following command to display detailed information about source-join type MVPN IPv4 routes matching a specific source AS number, source IP address, and group IP address.
show router bgp routes mvpn-ipv4 type source-join source-as 200 source-ip 150.100.1.2 group-ip 226.0.0.0 detail===============================================================================
BGP Router ID:10.20.1.3 AS:200 Local AS:200
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP MVPN-IPv4 Routes
===============================================================================
Route Type : Source-Join
Route Dist. : 1:1
Source AS : 200
Source IP : 150.100.1.2
Group IP : 226.0.0.0
Nexthop : 10.20.1.4
From : 10.20.1.4
Res. Nexthop : 0.0.0.0
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : 0
Community : target:10.20.1.3:2
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.4
Flags : Used Valid Best IGP
AS-Path : No As-Path
-------------------------------------------------------------------------------
Routes : 1
===============================================================================Use the following command to display detailed information about spmsi-ad type MVPN IPv4 routes.
show router bgp routes mvpn-ipv4 type spmsi-ad detail===============================================================================
BGP Router ID:10.20.1.3 AS:46000 Local AS:46000
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP MVPN-IPv4 Routes
===============================================================================
Original Attributes
Route Type : Spmsi-Ad
Route Dist. : 10.1.200.41:1
Originator IP : 10.20.1.4
Source IP : 10.1.101.2
Group IP : 225.100.0.0
<snip>
Last Modified : 00h18m52s
VPRN Imported : 1
-------------------------------------------------------------------------------
PMSI Tunnel Attribute :
Tunnel-type : None Flags : Leaf required
MPLS Label : 0
-------------------------------------------------------------------------------
===============================================================================Use the following command to display detailed information about spmsi-ad type MVPN IPv6 routes.
show router bgp routes mvpn-ipv6 type spmsi-ad detail===============================================================================
BGP Router ID:10.20.1.3 AS:46000 Local AS:46000
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP MVPN-IPv6 Routes
===============================================================================
Original Attributes
Route Type : Spmsi-Ad
Route Dist. : 10.1.200.41:1
Originator IP : 10.20.1.4
Source IP : 2001:10:1:101::2
Group IP : ff0e:225:100::
<snip>
VPRN Imported : 1
-------------------------------------------------------------------------------
PMSI Tunnel Attribute :
Tunnel-type : None Flags : Leaf required
MPLS Label : 0
-------------------------------------------------------------------------------
===============================================================================Use the following command to display information about multi-segment pseudowire routes.
show router bgp routes ms-pw===============================================================================
BGP Router ID:10.20.1.3 AS:100 Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP MSPW Routes
===============================================================================
Flag Network RD
Nexthop AII-Type2/Preflen
As-Path
-------------------------------------------------------------------------------
? 3:10.20.1.3 100:3
10.20.1.5 3:10.20.1.3:0/64
200 100
? 3:10.20.1.3 100:4
10.20.1.5 3:10.20.1.3:0/64
200 100
u*>? 6:10.20.1.6 100:6
10.20.1.5 6:10.20.1.6:0/64
200 300 400
-------------------------------------------------------------------------------
Routes : 3
===============================================================================Use the following command to display detailed information about IPv4 routes.
show router bgp routes ipv4 detail===============================================================================
BGP Router ID:1.1.1.1 AS:100 Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP IPv4 Routes
===============================================================================
-------------------------------------------------------------------------------
Original Attributes
Network : 11.1.1.1/32
Nexthop : 192.168.1.1
Path Id : None
From : 192.168.1.1
Res. Nexthop : 192.168.1.1
Local Pref. : n/a Interface Name : net
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : 5000
AIGP Metric : 100
Community : None
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 2.2.2.2
Fwd Class : None Priority : None
Flags : Used Valid Best Incomplete
Route Source : External
AS-Path : 200 400 500
Modified Attributes
Network : 11.1.1.1/32
Nexthop : 192.168.1.1
Path Id : None
From : 192.168.1.1
Res. Nexthop : 192.168.1.1
Local Pref. : None Interface Name : net
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : 5000
AIGP Metric : 110
Community : None
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 2.2.2.2
Fwd Class : None Priority : None
Flags : Used Valid Best Incomplete
Route Source : External
AS-Path : 200 400 500
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================Use the following command to display detailed information about BGP-LS link NLRI routes, including information about the advertised routes.
show router bgp routes bgp-ls hunt link===============================================================================
BGP Router ID:38.120.48.226 AS:65000 Local AS:65000
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked, x - stale, > - best, b - backup, p - purge
Origin codes : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP-LS Link NLRIs
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network:
Type : LINK-NLRI
Protocol : ISIS Level-2 Identifier : 0xa
Local Node descriptor:
Autonomous System : 0.0.253.232
Link State Id : 10
IGP Router Id : 0x38120048184
Remote Node descriptor:
Autonomous System : 0.0.253.232
Link State Id : 10
IGP Router Id : 0x38120048223
Link descriptor:
IPV4 Interface Addr: 10.0.14.184
IPV4 Neighbor Addr : 10.0.14.223
Nexthop : 38.120.48.199
From : 38.120.48.199
Res. Nexthop : 0.0.0.0
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None
Connector : None
Community : No Community Members
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 38.120.48.199
Flags : Valid Best IGP
Route Source : Internal
AS-Path : No As-Path
Route Tag : 0
Neighbor-AS : N/A
DB Orig Val : N/A Final Orig Val : N/A
Source Class : 0 Dest Class : 0
Add Paths Send : Default
Last Modified : 02h27m50s
-------------------------------------------------------------------------------
Link State Attribute TLVs :
Administrative group (color) : 0x0
Maximum link bandwidth : 100000 Kbps
Max. reservable link bandwidth : 100000 Kbps
Unreserved bandwidth0 : 100000 Kbps
Unreserved bandwidth1 : 100000 Kbps
Unreserved bandwidth2 : 100000 Kbps
Unreserved bandwidth3 : 100000 Kbps
Unreserved bandwidth4 : 100000 Kbps
Unreserved bandwidth5 : 100000 Kbps
Unreserved bandwidth6 : 100000 Kbps
Unreserved bandwidth7 : 100000 Kbps
TE Default Metric : 100
IGP Metric : 100
Adjacency Segment Identifier (Adj-SID) : flags 0x30 weight 0 sid 262136
-------------------------------------------------------------------------------
Network:
Type : LINK-NLRI
Protocol : ISIS Level-2 Identifier : 0xa
Local Node descriptor:
Autonomous System : 0.0.253.232
Link State Id : 10
IGP Router Id : 0x38120048184
Remote Node descriptor:
Autonomous System : 0.0.253.232
Link State Id : 10
IGP Router Id : 0x38120048223
Link descriptor:
IPV4 Interface Addr: 10.0.14.184
IPV4 Neighbor Addr : 10.0.14.223
Nexthop : 38.120.48.221
From : 38.120.48.221
Res. Nexthop : 0.0.0.0
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None
Connector : None
Community : No Community Members
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 38.120.48.221
Flags : Valid IGP
TieBreakReason : OriginatorID
Route Source : Internal
AS-Path : No As-Path
Route Tag : 0
Neighbor-AS : N/A
DB Orig Val : N/A Final Orig Val : N/A
Source Class : 0 Dest Class : 0
Add Paths Send : Default
Last Modified : 02h27m54s
-------------------------------------------------------------------------------
Link State Attribute TLVs :
Administrative group (color) : 0x0
Maximum link bandwidth : 100000 Kbps
Max. reservable link bandwidth : 100000 Kbps
Unreserved bandwidth0 : 100000 Kbps
Unreserved bandwidth1 : 100000 Kbps
Unreserved bandwidth2 : 100000 Kbps
Unreserved bandwidth3 : 100000 Kbps
Unreserved bandwidth4 : 100000 Kbps
Unreserved bandwidth5 : 100000 Kbps
Unreserved bandwidth6 : 100000 Kbps
Unreserved bandwidth7 : 100000 Kbps
TE Default Metric : 100
IGP Metric : 100
Adjacency Segment Identifier (Adj-SID) : flags 0x30 weight 0 sid 262136
---------------------------------------------Use the following command to display information about all learned BGP routes belonging to the IPv4 address family.
show router bgp routes===============================================================================
BGP Router ID:10.20.1.1 AS:1 Local AS:1
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP IPv4 Routes
===============================================================================
Flag Network LocalPref MED
Nexthop Path-Id Label
As-Path
-------------------------------------------------------------------------------
u*>i 20.0.0.1/32 100 2010
10.20.1.2 None 131057
2
ub*i 20.0.0.1/32 100 2010
10.20.1.3 None 131067
2
-------------------------------------------------------------------------------
Routes : 2
===============================================================================Use the following command to display detailed information about EVPN MAC routes (including information about advertised routes) that match a specific address.
show router bgp routes evpn mac mac-address 00:00:01:00:01:02 hunt===============================================================================
BGP Router ID:10.20.1.1 AS:100 Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP EVPN Mac Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network : N/A
Nexthop : 10.20.1.2
From : 10.20.1.2
Res. Nexthop : N/A
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : 0
AIGP Metric : None
Connector : None
Community : target:100:1 bgp-tunnel-encap:VXLAN
mac-mobility:Seq:0/Static
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.2
Flags : Used Valid Best IGP
Route Source : Internal
AS-Path : 111
EVPN type : MAC
ESI : 0:0:0:0:0:0:0:0:0:0 Tag : 1
IP Address : N/A Route Dist. : 10.20.1.2:1
Mac Address : 00:00:01:00:01:02
MPLS Label1 : X MPLS Label2 : Y
Route Tag : Z
Neighbor-AS : 111
DB Orig Val : N/A Final Orig Val : N/A
Source Class : 0 Dest Class : 0
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================Use the following command to display detailed information about EVPN IP prefix routes matching a specific prefix.
show router bgp routes evpn ip-prefix prefix 3.0.1.6/32 detail===============================================================================
BGP Router ID:10.20.1.1 AS:100 Local AS:100
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup
===============================================================================
BGP EVPN IP-Prefix Routes
===============================================================================
-------------------------------------------------------------------------------
Original Attributes
Network : N/A
Nexthop : 10.20.1.2
From : 10.20.1.2
Res. Nexthop : N/A
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : 0
AIGP Metric : None
Connector : None
Community : target:100:1 mac-nh:00:00:01:00:01:02
bgp-tunnel-encap:VXLAN
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.2
Flags : Used Valid Best IGP
Route Source : Internal
AS-Path : No As-Path
EVPN type : IP-PREFIX
ESI : N/A Tag : 1
Gateway Address: 00:00:01:00:01:02
Prefix : 3.0.1.6/32 Route Dist. : 10.20.1.2:1
MPLS Label : X
Route Tag : Z
Neighbor-AS : N/A
DB Orig Val : N/A Final Orig Val : N/A
Source Class : 0 Dest Class : 0
Modified Attributes
Network : N/A
Nexthop : 10.20.1.2
From : 10.20.1.2
Res. Nexthop : N/A
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : 0
AIGP Metric : None
Connector : None
Community : target:100:1 mac-nh:00:00:01:00:01:02
bgp-tunnel-encap:VXLAN
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.2
Flags : Used Valid Best IGP
Route Source : Internal
AS-Path : 111
EVPN type : IP-PREFIX
ESI : N/A Tag : 1
Gateway Address: 00:00:01:00:01:02
Prefix : 3.0.1.6/32 Route Dist. : 10.20.1.2:1
MPLS Label : X
Route Tag : W
Neighbor-AS : 111
DB Orig Val : N/A Final Orig Val : N/A
Source Class : 0 Dest Class : 0
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
Use the following command to display detailed information about EVPN IP prefix routes (including information about the advertised routes) matching a specific prefix.
show router bgp routes evpn ip-prefix prefix 10.0.0.0/24 hunt===============================================================================
BGP Router ID:192.0.2.4 AS:64500 Local AS:64500
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked, x - stale, > - best, b - backup, p - purge
Origin codes : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP EVPN IP-Prefix Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network : n/a
Nexthop : 192.0.2.2
Path Id : None
From : 192.0.2.2
Res. Nexthop : 192.168.24.1
Local Pref. : 100 Interface Name : int-PE-4-PE-2
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None IGP Cost : 10
Connector : None
Community : target:64500:2002 mac-nh:00:00:00:00:00:02
bgp-tunnel-encap:MPLS
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 192.0.2.2
Flags : Used Valid Best IGP
Route Source : Internal
AS-Path : No As-Path
D-Path : [65000:1:128(ipvpn), 65000:2:70(evpn), 65000:3:1(ip), 65000:4:0(local)]
EVPN type : IP-PREFIX
ESI : n/a
Tag : 0
Gateway Address: 00:00:00:00:00:02
Prefix : 10.0.0.0/24
Route Dist. : 192.0.2.2:2002
MPLS Label : LABEL 524266
Route Tag : 0
Neighbor-AS : n/a
DB Orig Val : N/A Final Orig Val : N/A
Source Class : 0 Dest Class : 0
Add Paths Send : Default
Last Modified : 23h15m42s
====================================================================
Use the following command to display information about BGP-LS routes.
show router bgp routes bgp-ls====================================================================
BGP-LS NLRIs
====================================================================
--------------------------------------------------------------------
Type: Node
Protocol: ISIS | OSPFLevel: L1 | L2 | NA
Identifier:
Network : 215.0.0.0/24
Nexthop : 202.50.0.2
Path Id : None
From : 10.255.105.141
AS Path: 65534
Local Node
Name:
Autonomous System:
Area ID:
Rtr ID:
Flags:
Type: Link
Protocol: ISIS | OSPFLevel: L1 | L2 | NA
Identifier:
Network : 215.0.0.0/24
Nexthop : 202.50.0.2
Path Id : None
From : 10.255.105.141
AS Path: 65534
Local Node
Name:
Autonomous System:
Area ID:
Rtr ID:
Remote Node
Name:
Autonomous System:
Area ID:
Rtr ID:
Descriptor
IPv4 Address: 10.10.1.1
Attributes
Flags:
IGP Metric: 1000
Admin-Grp: 0
Maximum Link BW (kbps): 100000
Maximum Reservable BW (kbps): 100000
TE Default Metric: 1000
Unreserved BW (kbps): 10000
Type: IPv4 Prefix
Protocol: ISIS | OSPFLevel: L1 | L2 | NA
Identifier:
Network : 215.0.0.0/24
Nexthop : 202.50.0.2
Path Id : None
From : 10.255.105.141
AS Path: 65534
Local Node
Name:
Autonomous System:
Area ID: 0.0.0.0
Rtr ID: 10.20.1.6
Flags:
Prefix descriptor
IPv4 Address: 10.20.1.6
Prefix-len: 32
MT_ID :0
Route Type :Unknown
Use the following command to display detailed information about EVPN multicast join sync routes, including information about the advertised routes.
show router bgp routes evpn mcast-join-synch hunt===============================================================================
BGP Router ID:192.0.2.3 AS:64500 Local AS:64500
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked, x - stale, > - best, b - backup, p - purge
Origin codes : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP EVPN Mcast Join Synch Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network : n/a
Nexthop : 192.0.2.2
From : 192.0.2.2
Res. Nexthop : 192.168.23.1
Local Pref. : 100 Interface Name : int-PE-3-PE-2
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : 0
AIGP Metric : None IGP Cost : 10
Connector : None
Community : evi-target:64500:2001 target:00:00:00:00:00:01
bgp-tunnel-encap:MPLS
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 192.0.2.2
Flags : Used Valid Best IGP
Route Source : Internal
AS-Path : No As-Path
EVPN type : MCAST-JOIN
Tag : 0
ESI : 01:00:00:00:00:00:01:00:00:00
Version : Flags(0xc): IE:1/V3:1/V2:0/V1:0
Src IP : 0.0.0.0
Grp IP : 239.0.0.4
Originator IP : 192.0.2.2
Route Dist. : 192.0.2.2:2001
Route Tag : 0
Neighbor-AS : n/a
DB Orig Val : N/A Final Orig Val : N/A
Source Class : 0 Dest Class : 0
Add Paths Send : Default
Last Modified : 00h29m38s
|
Label |
Description |
|---|---|
|
BGP Router ID |
The local BGP router ID. |
|
AS |
The configured autonomous system number. |
|
Local AS |
The configured local AS setting. If not configured, then the value is the same as the AS. |
|
Route Dist. |
Displays the route distinguisher identifier attached to routes that distinguishes the VPN it belongs. |
|
VPN Label |
Displays the label generated by the PEs label manager. |
|
Network |
The IP prefix and mask length. |
|
Nexthop |
The BGP nexthop. |
|
From |
The advertising BGP neighbor’s IP address. |
|
Res. Nexthop |
The resolved nexthop. |
|
Local Pref. |
The local preference value. This value is used if the BGP route arrives from a BGP peer without the Local Pref attribute set. It is overridden by any value set via a route policy. |
|
Flag |
u — used s — suppressed h —history d — decayed * — valid i — igp e — egp ? — incomplete > — best S — sticky |
|
Aggregator AS |
The aggregator AS value. none — Aggregator AS attributes are not present. |
|
Aggregator |
The aggregator attribute value. none — Aggregator attributes are not present. |
|
Atomic Aggr. |
Atomic —Not Atomic — The atomic aggregator flag is not set. The atomic aggregator flag is set. |
|
MED |
The MED metric value. none — MED metrics are present. |
|
Community |
The BGP community attribute list. |
|
Cluster |
The route reflector cluster list. |
|
D-Path |
The D-Path. |
|
Originator Id |
The originator ID path attribute value. none — The originator ID attribute is not present. |
|
Peer Router Id |
The router ID of the advertising router. |
|
AS-Path |
The BGP AS path attribute. |
|
VPRN Imported |
Displays the VPRNs where a particular BGP-VPN received route has been imported and installed. |
|
TieBreakReason |
Displays the step in the BGP decision process where a BGP route lost the tie-break with the next better BGP route for the same prefix. LocalPref — This route is not the best because the next better route has a higher LOCAL_PREF. AIGP — This route is not the best because the next better route has a lower derived AIGP metric value. ASPathLen — This route is not the best because the next better route has a shorter AS PATH length. Origin — This route is not the best because the next better route has a lower Origin value. MED — This route is not the best because the next better route has a lower MED, and MED comparison of the routes was allowed. IBGP — This IBGP route is not the best because the next better route is an EBGP route. NHCost — This route is not the best because the next better route has a lower metric value to reach the BGP NEXT HOP. BGPID — This route is not the best because the next better route has a lower Originator ID or BGP Identifier. ClusterLen — This route is not the best because the next better route has a shorter Cluster list length. PeerIP — This route is not the best because the next better route has a lower neighbor IP address. |
routes
Syntax
routes [ipv4-unicast | ipv6-unicast | ipv4-multicast | ipv6-multicast | mt mt-id-number] [ip-prefix[/ prefix-length]] [alternative] [exclude-shortcut] [flex-algo {flex-algo-id | all}] [detail]
Context
[Tree] (show>router>isis routes)
Full Context
show router isis routes
Description
This command displays the routes in the IS-IS route table.
Parameters
- ipv4-unicast
-
Displays IPv4 unicast parameters.
- ipv6-unicast
-
Displays IPv6 unicast parameters.
- mt mt-id-number
-
Displays multi-topology parameters.
- alternative
-
Displays LFA details.
- exclude-shortcut
-
Displays the routes without shortcuts.
- detail
-
Displays detailed information.
- flex-algo flex-algo-id
-
Displays the flexible algorithm aware forwarding path.
- flex-algo all
-
Displays all the flexible algorithms-aware forwarding paths.
Platforms
All
Output
The following outputs are examples of IS-IS route information, and IS-IS Route Output Fields describes the output fields.
Output Example*A:Dut-C# show router isis routes
===============================================================================
Rtr Base ISIS Instance 0 Route Table
===============================================================================
Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag/SID[F]
-------------------------------------------------------------------------------
1.1.2.0/24 20 1/Int. 0 Dut-A
1.1.3.1 0 0
1.1.2.0/24 20 1/Int. 0 Dut-B
1.2.3.2 0 0
1.1.3.0/24 10 1/Int. 0 Dut-C
0.0.0.0 0 0
1.2.3.0/24 10 1/Int. 0 Dut-C
0.0.0.0 0 0
1.2.4.0/24 20 1/Int. 0 Dut-B
1.2.3.2 0 0
1.3.5.0/24 10 1/Int. 0 Dut-C
0.0.0.0 0 0
1.4.5.0/24 20 1/Int. 0 Dut-E
1.3.5.5 0 0
1.4.6.0/24 30 1/Int. 0 Dut-B
1.2.3.2 0 0
1.4.6.0/24 30 1/Int. 0 Dut-E
1.3.5.5 0 0
10.20.1.1/32 10 1/Int. 0 Dut-A
1.1.3.1 0 0
10.20.1.2/32 10 1/Int. 0 Dut-B
1.2.3.2 0 0
10.20.1.3/32 0 1/Int. 0 Dut-C
0.0.0.0 0 0
10.20.1.4/32 20 1/Int. 0 Dut-B
1.2.3.2 0 0
10.20.1.4/32 20 1/Int. 0 Dut-E
1.3.5.5 0 0
10.20.1.5/32 10 1/Int. 0 Dut-E
1.3.5.5 0 0
10.20.1.6/32 30 1/Int. 0 Dut-B
1.2.3.2 0 0
10.20.1.6/32 30 1/Int. 0 Dut-E
1.3.5.5 0 0
-------------------------------------------------------------------------------
No. of Routes: 17 (17 paths)
-------------------------------------------------------------------------------
Flags : L = LFA nexthop available
SID[F] : R = Re-advertisement
N = Node-SID
nP = no penultimate hop POP
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
===============================================================================
*A:Dut-C# show router isis routes ipv4-unicast
===============================================================================
Rtr Base ISIS Instance 0 Route Table
===============================================================================
Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag/SID[F]
-------------------------------------------------------------------------------
1.2.3.0/24 10 1/Int. 8 Dut-C
0.0.0.0 0 0
1.2.4.0/24 20 1/Int. 8 Dut-D
1.3.4.4 0 0
1.2.5.0/24 20 1/Int. 8 Dut-B
1.2.3.2 0 0
1.3.4.0/24 10 1/Int. 8 Dut-C
0.0.0.0 0 0
1.3.5.0/24 [L] 30 1/Int. 11 Dut-B
1.2.3.2 0 0
1.4.5.0/24 20 1/Int. 8 Dut-D
1.3.4.4 0 0
2.3.4.0/24 40 1/Int. 11 Dut-D
1.3.4.4 0 0
4.0.0.1/32 10 1/Int. 8 Dut-D
1.3.4.4 0 0/1[NnP]
10.20.1.2/32 10 1/Int. 8 Dut-B
1.2.3.2 0 0/1002[NnP]
10.20.1.3/32 0 1/Int. 5 Dut-C
0.0.0.0 0 0/1003[NnP]
10.20.1.4/32 10 1/Int. 8 Dut-D
1.3.4.4 0 0/1004[NnP]
10.20.1.5/32 [L] 20 1/Int. 11 Dut-B
1.2.3.2 0 0/1005[NnP]
10.21.1.2/32 10 1/Int. 8 Dut-B
1.2.3.2 0 0
10.21.1.3/32 0 1/Int. 5 Dut-C
0.0.0.0 0 0
10.21.1.4/32 10 1/Int. 8 Dut-D
1.3.4.4 0 0
10.21.1.5/32 [L] 20 1/Int. 11 Dut-B
1.2.3.2 0 0
-------------------------------------------------------------------------------
No. of Routes: 16 (16 paths)
-------------------------------------------------------------------------------
Flags : L = LFA nexthop available
SID[F] : R = Re-advertisement
N = Node-SID
nP = no penultimate hop POP
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
===============================================================================
*A:Dut-C# show router isis routes ipv4-unicast alternative
===============================================================================
Rtr Base ISIS Instance 0 Route Table (alternative)
===============================================================================
Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag/SID[F]
Alt-Nexthop Alt- Alt-Type
Metric
-------------------------------------------------------------------------------
1.2.3.0/24 10 1/Int. 8 Dut-C
0.0.0.0 0 0
1.2.4.0/24 20 1/Int. 8 Dut-D
1.3.4.4 0 0
1.2.5.0/24 20 1/Int. 8 Dut-B
1.2.3.2 0 0
1.3.4.0/24 10 1/Int. 8 Dut-C
0.0.0.0 0 0
1.3.5.0/24 30 1/Int. 11 Dut-B
1.2.3.2 0 0
1.3.4.4(L) 30 NP
1.4.5.0/24 20 1/Int. 8 Dut-D
1.3.4.4 0 0
2.3.4.0/24 40 1/Int. 11 Dut-D
1.3.4.4 0 0
4.0.0.1/32 10 1/Int. 8 Dut-D
1.3.4.4 0 0/1[NnP]
10.20.1.2/32 10 1/Int. 8 Dut-B
1.2.3.2 0 0/1002[NnP]
10.20.1.3/32 0 1/Int. 5 Dut-C
0.0.0.0 0 0/1003[NnP]
10.20.1.4/32 10 1/Int. 8 Dut-D
1.3.4.4 0 0/1004[NnP]
10.20.1.5/32 20 1/Int. 11 Dut-B
1.2.3.2 0 0/1005[NnP]
1.3.4.4(L) 20 NP
10.21.1.2/32 10 1/Int. 8 Dut-B
1.2.3.2 0 0
10.21.1.3/32 0 1/Int. 5 Dut-C
0.0.0.0 0 0
10.21.1.4/32 10 1/Int. 8 Dut-D
1.3.4.4 0 0
10.21.1.5/32 20 1/Int. 11 Dut-B
1.2.3.2 0 0
1.3.4.4(L) 20 NP
-------------------------------------------------------------------------------
No. of Routes: 16 (18 paths)
Flags : L = Loop-Free Alternate nexthop
Alt-Type : LP = linkProtection, NP = nodeProtection
SID[F] : R = Re-advertisement
N = Node-SID
nP = no penultimate hop POP
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
===============================================================================The following outputs are examples of IS-IS detailed route information.
Output Example*A:Dut-C# show router isis routes 170::/96 detail
===============================================================================
Rtr Base ISIS Instance 0 Route Table (detail)
===============================================================================
Prefix : 170::/96
Algorithm : 134
Status : Active Level : 1
NextHop : fe80::a40f:1ff:fe01:b-"toA"
Metric : 10 Type : Internal
SPF Version : 8 SysID/Hostname : Dut-A
MT : 0 AdminTag : 0
Alt-NextHop : fe80::a414:1ff:fe01:15-"toB"
Alt-Metric : 20 Alt-Type : linkProtection
-------------------------------------------------------------------------------
No. of Routes: 1 (1 path)
-------------------------------------------------------------------------------
SID[F] : R = Re-advertisement
N = Node-SID
nP = no penultimate hop POP
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
===============================================================================The following output is an example of the flexible-algorithm output information, and IS-IS Route Output Fields describes the output fields.
Output ExampleA:Dut-A# show router isis 0 routes flex-algo all
===============================================================================
Rtr Base ISIS Instance 0 Flex-Algo 128 Route Table
===============================================================================
Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag/SID[F]
-------------------------------------------------------------------------------
10.20.1.1/32 0 1/Int. 93 Dut-A
0.0.0.0 0 0/11[NnP]
10.20.1.2/32 200 2/Int. 89 Dut-C
10.10.10.6 0 0/12[NnP]
10.20.1.3/32 100 2/Int. 89 Dut-C
10.10.10.6 0 0/13[NnP]
10.20.1.4/32 300 2/Int. 96 Dut-C
10.10.10.6 0 0/14[RNnP]
-------------------------------------------------------------------------------
No. of Routes: 4 (4 paths)
-------------------------------------------------------------------------------
Flags : L = LFA nexthop available
SID[F] : R = Re-advertisement
N = Node-SID
nP = no penultimate hop POP
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
===============================================================================
The following output is an example of the flexible-algorithm output showing SRv6 routes and micro-segment locator routes, and IS-IS Route Output Fields describes the output fields.
Output Example*A:Dut-C# show router isis routes flex-algo all
===============================================================================
Rtr Base ISIS Instance 0 Flex-Algo 128 Route Table
===============================================================================
Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag/SID[F]
-------------------------------------------------------------------------------
1.1.1.11/32 [L] 10 1/Int. 7 Dut-A
1.1.3.1 0 0/511[NnP]
1.1.1.12/32 [L] 10 1/Int. 7 Dut-B
1.2.3.2 0 0/512[NnP]
1.1.1.13/32 0 1/Int. 3 Dut-C
0.0.0.0 0 0/513[NnP]
1.1.1.14/32 [L] 20 1/Int. 8 Dut-B
1.2.3.2 0 0/514[NnP]
1.1.1.15/32 10 1/Int. 7 Dut-E
1.3.5.5 0 0/515[NnP]
1.1.1.16/32 [L] 20 1/Int. 8 Dut-E
1.3.5.5 0 0/516[NnP]
110::/96 [L] 10 1/Int. 7 Dut-A
fe80::a40f:1ff:fe01:b-"toA" 0 0
210::/96 [L] 10 1/Int. 8 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0
310::/96 0 1/Int. 9 Dut-C
:: 0 0
410::/96 [L] 20 1/Int. 8 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0
510::/96 10 1/Int. 8 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0
610::/96 [L] 20 1/Int. 8 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0
2000:0:0:1::/64 [L] 10 1/Int. 7 Dut-A
fe80::a40f:1ff:fe01:b-"toA" 0 0
2000:0:0:2::/64 [L] 10 1/Int. 8 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0
2000:0:0:3::/64 0 1/Int. 9 Dut-C
:: 0 0
2000:0:0:4::/64 [L] 20 1/Int. 8 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0
2000:0:0:5::/64 10 1/Int. 8 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0
2000:0:0:6::/64 [L] 20 1/Int. 8 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0
3ffe::101:10b/128 [L] 10 1/Int. 7 Dut-A
fe80::a40f:1ff:fe01:b-"toA" 0 0/711[NnP]
3ffe::101:10c/128 [L] 10 1/Int. 7 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0/712[NnP]
3ffe::101:10d/128 0 1/Int. 3 Dut-C
:: 0 0/713[NnP]
3ffe::101:10e/128 [L] 20 1/Int. 8 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0/714[NnP]
3ffe::101:10f/128 10 1/Int. 7 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0/715[NnP]
3ffe::101:110/128 [L] 20 1/Int. 8 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0/716[NnP]
-------------------------------------------------------------------------------
No. of Routes: 24 (24 paths)
-------------------------------------------------------------------------------
Flags : L = LFA nexthop available
SID[F] : R = Re-advertisement
N = Node-SID
nP = no penultimate hop POP
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
===============================================================================
===============================================================================
Rtr Base ISIS Instance 0 Flex-Algo 129 Route Table
===============================================================================
Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag/SID[F]
-------------------------------------------------------------------------------
1.1.1.11/32 [L] 10 1/Int. 7 Dut-A
1.1.3.1 0 0/521[NnP]
1.1.1.12/32 [L] 10 1/Int. 7 Dut-B
1.2.3.2 0 0/522[NnP]
1.1.1.13/32 0 1/Int. 3 Dut-C
0.0.0.0 0 0/523[NnP]
1.1.1.14/32 [L] 20 1/Int. 8 Dut-B
1.2.3.2 0 0/524[NnP]
1.1.1.15/32 10 1/Int. 7 Dut-E
1.3.5.5 0 0/525[NnP]
1.1.1.16/32 [L] 20 1/Int. 8 Dut-E
1.3.5.5 0 0/526[NnP]
120::/96 [L] 10 1/Int. 7 Dut-A
fe80::a40f:1ff:fe01:b-"toA" 0 0
220::/96 [L] 10 1/Int. 8 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0
320::/96 0 1/Int. 9 Dut-C
:: 0 0
420::/96 [L] 20 1/Int. 8 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0
520::/96 10 1/Int. 8 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0
620::/96 [L] 20 1/Int. 8 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0
3000:0:0:1::/64 [L] 10 1/Int. 7 Dut-A
fe80::a40f:1ff:fe01:b-"toA" 0 0
3000:0:0:2::/64 [L] 10 1/Int. 8 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0
3000:0:0:3::/64 0 1/Int. 9 Dut-C
:: 0 0
3000:0:0:4::/64 [L] 20 1/Int. 8 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0
3000:0:0:5::/64 10 1/Int. 8 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0
3000:0:0:6::/64 [L] 20 1/Int. 8 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0
3ffe::101:10b/128 [L] 10 1/Int. 7 Dut-A
fe80::a40f:1ff:fe01:b-"toA" 0 0/721[NnP]
3ffe::101:10c/128 [L] 10 1/Int. 7 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0/722[NnP]
3ffe::101:10d/128 0 1/Int. 3 Dut-C
:: 0 0/723[NnP]
3ffe::101:10e/128 [L] 20 1/Int. 8 Dut-B
fe80::a414:1ff:fe01:15-"toB" 0 0/724[NnP]
3ffe::101:10f/128 10 1/Int. 7 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0/725[NnP]
3ffe::101:110/128 [L] 20 1/Int. 8 Dut-E
fe80::a42a:1ff:fe01:1-"toE" 0 0/726[NnP]
-------------------------------------------------------------------------------
No. of Routes: 24 (24 paths)
-------------------------------------------------------------------------------
Flags : L = LFA nexthop available
SID[F] : R = Re-advertisement
N = Node-SID
nP = no penultimate hop POP
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
===============================================================================
The following output is an example of the detailed flexible-algorithm output, and IS-IS Route Output Fields describes the output fields.
Output Example*A:Dut-C# show router isis routes flex-algo 134 170::/96 detail
===============================================================================
Rtr Base ISIS Instance 0 Flex-Algo 134 Route Table (detail)
===============================================================================
Prefix : 170::/96
Algorithm : 134
Status : Active Level : 1
NextHop : fe80::a40f:1ff:fe01:b-"toA"
Metric : 10 Type : Internal
SPF Version : 8 SysID/Hostname : Dut-A
MT : 0 AdminTag : 0
Alt-NextHop : fe80::a414:1ff:fe01:15-"toB"
Alt-Metric : 20 Alt-Type : linkProtection
-------------------------------------------------------------------------------
No. of Routes: 1 (1 path)
-------------------------------------------------------------------------------
SID[F] : R = Re-advertisement
N = Node-SID
nP = no penultimate hop POP
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
===============================================================================
Use the following command to filter and display information about SRv6 RTM entries associated with a flexible algorithm.
show router isis 0 routes flex-algo 128The following output is an example of information about SRv6 RTM entries associated with a flexible algorithm.
Output Example===============================================================================
Rtr Base ISIS Instance 0 Flex-Algo 128 Route Table
===============================================================================
Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag/SID[F]
-------------------------------------------------------------------------------
1.1.1.11/32 10 1/Int. 7 Dut-A
1.1.3.1 0 0/511[NnP]
110::/96 [L] 10 1/Int. 7 Dut-A
fe80::ce0f:1ff:fe01:b-"toA" 0 0
-------------------------------------------------------------------------------
No. of Routes: 2 (2 paths)
-------------------------------------------------------------------------------
Flags : L = LFA nexthop available
SID[F] : R = Re-advertisement
N = Node-SID
nP = no penultimate hop POP
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
===============================================================================|
Label |
Description |
|---|---|
|
Prefix |
Displays the route prefix and mask |
|
Algorithm |
Displays the algorithm |
|
Status |
Displays the status |
|
Level |
Displays the IS-IS level |
|
Metric |
Displays the route’s metric |
|
Lvl/Typ |
Displays the level (1 or 2) and the route type, Internal (Int) or External (Ext) |
|
Ver. |
Displays the SPF version that generated route |
|
SysID/Hostname |
Displays the hostname for the specific system-id |
|
NextHop |
Displays the system ID of nexthop, give hostname if possible |
|
MT |
Displays the IS-IS topology for the route |
|
AdminTag |
Displays the number of administrative tags |
|
SID[F] |
Displays the segment identifier flags of a Prefix-SID as defined by IETF segment routing R: Re-advertisement flag. If set, the prefix to which this Prefix-SID is attached has been propagated by the router either from another level (in other words, from level-1 to level-2 or the opposite) or from redistribution (for example, from another protocol). N: Node-SID flag. The N-Flag is set on Prefix-SIDs attached to a router loopback address. nP: no-PHP flag. If set, the penultimate hop must not pop the Prefix-SID before delivering the packet to the node that advertised the Prefix-SID. E: Explicit-Null Flag. If set, any upstream neighbor of the Prefix-SID originator must replace the Prefix-SID with a Prefix-SID having an Explicit-NULL value (0 for IPv4 and 2 for IPv6) before forwarding the packet. V: Value flag. If set, the Prefix-SID carries a value (instead of an index). L: Local Flag. If set, the value/index carried by the Prefix-SID has local significance. |
|
No. of Routes |
Displays the total number of routes |
routes
Syntax
routes [ip-prefix[/prefix-length]] [type] [ detail] [alternative] [summary] [exclude-shortcut] [ flex-algo {flex-algo-id | all}]
Context
[Tree] (show>router>ospf routes)
Full Context
show router ospf routes
Description
This command displays information about OSPF routes.
Parameters
- ip-prefix[/prefix-length]
-
Displays information about the specified IP prefix and length.
- flex-algo-id
-
Displays information about the specified flexible algorithm identifier.
- type
-
Displays information about the specified type.
- detail
-
Displays detailed information about the routes.
- alternative
-
Displays the level of protection per prefix (ref. show router OSPF routes alternative).
- summary
-
Displays summarized information about the routes.
- exclude-shortcut
-
Displays routes without shortcut, in the show>router>ospf context.
- flex-algo
-
Displays the OSPFv2 routes associated with a segment routing algorithm specified by the flexible algorithm identifier.
- all
-
Displays the OSPFv2 routes associated with all flexible algorithms.
Platforms
All
Output
The following output shows an example of OSPF routes information.
Output Example*A:Dut-C# show router ospf routes flex-algo 128
===============================================================================
Rtr Base OSPFv2 Instance 0 Flex-Algo 128 Route Table
===============================================================================
Destination Type(Dest) Stat SID SIDflgs
NHIP NHIF Cost[E2]
-------------------------------------------------------------------------------
10.20.1.2/32 IA (HOST) N (R) 1282 NnP
192.168.1.2 2 200
10.20.1.3/32 IA (HOST) D (R) 1283 NnP
DIRECT 1 0
10.20.1.5/32 IA (HOST) N (R) 1285 NnP
192.168.1.2 2 100
10.20.1.2/0 IA (RTR) N (N)
192.168.1.2 2 200
10.20.1.3/0 IA (RTR) N (N)
0
10.20.1.5/0 IA (RTR) N (N)
192.168.1.2 2 100
-------------------------------------------------------------------------------
No. of routes found: 6 (5 paths)
Stat: D = direct N = not direct
(RTM stat):(R) = added (F) = add failed
(N) = not added (D) = policy discarded
unnum-xxx: nexthop is unnumbered global interface index xxx
SID Flags : N = Node-SID
nP = no penultimate hop POP
M = Mapping server
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
I = Inter Area flag
A = Attached flag
B = Backup flag
===============================================================================
*A:Dut-C#
*A:Dut-C#
routes
Syntax
routes [ip-prefix[/prefix-length]] [type] [ detail] [alternative] [summary] [exclude-shortcut]
Context
[Tree] (show>router>ospf3 routes)
Full Context
show router ospf3 routes
Description
This command displays information about OSPF routes.
Parameters
- ip-prefix[/prefix-length]
-
Displays information about the specified IP prefix and length.
- type
-
Displays information about the specified type.
- detail
-
Displays detailed information about the routes.
- alternative
-
Displays the level of protection per prefix (ref. show router OSPF routes alternative).
- summary
-
Displays summarized information about the routes.
- exclude-shortcut
-
Displays routes without shortcut, in the show>router>ospf context.
Platforms
All
Output
The following output shows an example of OSPF information.
Output Example*A:Dut-C# show router ospf routes
===============================================================================
Rtr Base OSPFv2 Instance 0 Route Table (alternative)
===============================================================================
Destination Type(Dest) Stat SID SIDflgs
NHIP NHIF Cost[E2]
-------------------------------------------------------------------------------
1.1.1.1/32 IA (HOST) N (R)
1.1.3.1 3 1000
1.1.2.0/24 IA (NET) N (R)
1.1.3.1 3 2000
1.2.3.2 4 2000
1.1.3.0/24 IA (NET) D (F)
DIRECT 3 1000
1.2.3.0/24 IA (NET) D (F)
DIRECT 4 1000
1.2.4.0/24 IA (NET) N (R)
2.2.3.2 5 2000
1.3.5.0/24 IA (NET) D (F)
DIRECT 6 1000
1.4.5.0/24 IA (NET) N (R)
1.3.5.5 6 2000
1.4.6.0/24 IE (NET) N (R)
2.2.3.2 5 3000
1.3.5.5 6 3000
1.5.6.0/24 IE (NET) N (R)
1.3.5.5 6 2000
2.2.2.2/32 IA (HOST) N (R)
2.2.3.2 5 1000
2.2.3.0/24 IA (NET) D (F)
DIRECT 5 1000
3.3.3.3/32 IA (HOST) D (F)
DIRECT 2 0
4.4.4.4/32 IA (HOST) N (R)
2.2.3.2 5 2000
1.3.5.5 6 2000
5.5.5.5/32 IA (HOST) N (R)
1.3.5.5 6 1000
6.6.6.6/32 IE (HOST) N (R)
1.3.5.5 6 2000
10.20.1.1/32 IA (HOST) N (R) 11 NnP
1.1.3.1 3 1000
10.20.1.2/32 IA (HOST) N (R) 22 NnP
2.2.3.2 5 1000
10.20.1.3/32 IA (HOST) D (F) 33 NnP
DIRECT 1 0
10.20.1.4/32 IA (HOST) N (R) 44 NnP
2.2.3.2 5 2000
1.3.5.5 6 2000
10.20.1.5/32 IA (HOST) N (R) 55 NnP
1.3.5.5 6 1000
10.20.1.6/32 IE (HOST) N (R) 66 NnP
1.3.5.5 6 2000
10.20.1.1/0 IA (RTR) N (N)
1.1.3.1 3 1000
10.20.1.2/0 IA (AB-AS) N (N)
2.2.3.2 5 1000
10.20.1.2/0 IA (AB-AS) N (N)
1.2.3.2 4 1000
10.20.1.4/0 IA (AB-AS) N (N)
2.2.3.2 5 2000
1.3.5.5 6 2000
10.20.1.5/0 IA (AB-AS) N (N)
1.3.5.5 6 1000
-------------------------------------------------------------------------------
No. of routes found: 26 (31 paths)
Stat: D = direct N = not direct
(RTM stat):(R) = added (F) = add failed
(N) = not added (D) = policy discarded
SID Flags : N = Node-SID
nP = no penultimate hop POP
M = Mapping server
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
I = Inter Area flag
A = Attached flag
===============================================================================
*A:Dut-C# show router ospf routes
===============================================================================
Rtr Base OSPFv2 Instance 0 Routing Table
===============================================================================
Destination Type(Dest) Stat SID SIDflgs
NHIP NHIF Cost[E2]
-------------------------------------------------------------------------------
1.1.1.1/32 IA (HOST) N (R)
1.1.3.1 3 1000
1.1.2.0/24 IA (NET) N (R)
1.1.3.1 3 2000
1.2.3.2 4 2000
1.1.3.0/24 IA (NET) D (F)
DIRECT 3 1000
1.2.3.0/24 IA (NET) D (F)
DIRECT 4 1000
1.2.4.0/24 IA (NET) N (R)
2.2.3.2 5 2000
1.3.5.0/24 IA (NET) D (F)
DIRECT 6 1000
1.4.5.0/24 IA (NET) N (R)
1.3.5.5 6 2000
1.4.6.0/24 IE (NET) N (R)
2.2.3.2 5 3000
1.3.5.5 6 3000
1.5.6.0/24 IE (NET) N (R)
1.3.5.5 6 2000
2.2.2.2/32 IA (HOST) N (R)
2.2.3.2 5 1000
2.2.3.0/24 IA (NET) D (F)
DIRECT 5 1000
3.3.3.3/32 IA (HOST) D (F)
DIRECT 2 0
4.4.4.4/32 IA (HOST) N (R)
2.2.3.2 5 2000
1.3.5.5 6 2000
5.5.5.5/32 IA (HOST) N (R)
1.3.5.5 6 1000
6.6.6.6/32 IE (HOST) N (R)
1.3.5.5 6 2000
10.20.1.1/32 IA (HOST) N (R) 11 NnP
1.1.3.1 3 1000
10.20.1.2/32 IA (HOST) N (R) 22 NnP
2.2.3.2 5 1000
10.20.1.3/32 IA (HOST) D (F) 33 NnP
DIRECT 1 0
10.20.1.4/32 IA (HOST) N (R) 44 NnP
2.2.3.2 5 2000
1.3.5.5 6 2000
10.20.1.5/32 IA (HOST) N (R) 55 NnP
1.3.5.5 6 1000
10.20.1.6/32 IE (HOST) N (R) 66 NnP
1.3.5.5 6 2000
10.20.1.1/0 IA (RTR) N (N)
1.1.3.1 3 1000
10.20.1.2/0 IA (AB-AS) N (N)
2.2.3.2 5 1000
10.20.1.2/0 IA (AB-AS) N (N)
1.2.3.2 4 1000
10.20.1.4/0 IA (AB-AS) N (N)
2.2.3.2 5 2000
1.3.5.5 6 2000
10.20.1.5/0 IA (AB-AS) N (N)
1.3.5.5 6 1000
-------------------------------------------------------------------------------
No. of routes found: 26 (31 paths)
Stat: D = direct N = not direct
(RTM stat):(R) = added (F) = add failed
(N) = not added (D) = policy discarded
SID Flags : N = Node-SID
nP = no penultimate hop POP
M = Mapping server
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
I = Inter Area flag
A = Attached flag
===============================================================================
*A:Dut-C# show router ospf routes alternative
===============================================================================
Rtr Base OSPFv2 Instance 0 Route Table (alternative)
===============================================================================
Destination Type(Dest) Stat SID SIDflgs
NHIP NHIF Cost[E2]
A-NHIP(L) A-NHIF A-Cost[E2]
-------------------------------------------------------------------------------
1.1.1.1/32 IA (HOST) N (R)
1.1.3.1 3 1000
1.2.3.2(L) 4 2000
1.1.2.0/24 IA (NET) N (R)
1.1.3.1 3 2000
1.2.3.2 4 2000
1.1.3.0/24 IA (NET) D (F)
DIRECT 3 1000
1.2.3.0/24 IA (NET) D (F)
DIRECT 4 1000
1.2.4.0/24 IA (NET) N (R)
2.2.3.2 5 2000
1.3.5.0/24 IA (NET) D (F)
DIRECT 6 1000
1.4.5.0/24 IA (NET) N (R)
1.3.5.5 6 2000
1.4.6.0/24 IE (NET) N (R)
2.2.3.2 5 3000
1.3.5.5 6 3000
1.5.6.0/24 IE (NET) N (R)
1.3.5.5 6 2000
2.2.2.2/32 IA (HOST) N (R)
2.2.3.2 5 1000
2.2.3.0/24 IA (NET) D (F)
DIRECT 5 1000
3.3.3.3/32 IA (HOST) D (F)
DIRECT 2 0
4.4.4.4/32 IA (HOST) N (R)
2.2.3.2 5 2000
1.3.5.5 6 2000
5.5.5.5/32 IA (HOST) N (R)
1.3.5.5 6 1000
6.6.6.6/32 IE (HOST) N (R)
1.3.5.5 6 2000
10.20.1.1/32 IA (HOST) N (R) 11 NnP
1.1.3.1 3 1000
1.2.3.2(L) 4 2000
10.20.1.2/32 IA (HOST) N (R) 22 NnP
2.2.3.2 5 1000
10.20.1.3/32 IA (HOST) D (F) 33 NnP
DIRECT 1 0
10.20.1.4/32 IA (HOST) N (R) 44 NnP
2.2.3.2 5 2000
1.3.5.5 6 2000
10.20.1.5/32 IA (HOST) N (R) 55 NnP
1.3.5.5 6 1000
10.20.1.6/32 IE (HOST) N (R) 66 NnP
1.3.5.5 6 2000
10.20.1.1/0 IA (RTR) N (N)
1.1.3.1 3 1000
10.20.1.2/0 IA (AB-AS) N (N)
2.2.3.2 5 1000
10.20.1.2/0 IA (AB-AS) N (N)
1.2.3.2 4 1000
10.20.1.4/0 IA (AB-AS) N (N)
2.2.3.2 5 2000
1.3.5.5 6 2000
10.20.1.5/0 IA (AB-AS) N (N)
1.3.5.5 6 1000
-------------------------------------------------------------------------------
No. of routes found: 26 (31 paths)
Flags: L = Loop-Free Alternate nexthop
Stat: D = direct N = not direct
(RTM stat):(R) = added (F) = add failed
(N) = not added (D) = policy discarded
SID Flags : N = Node-SID
nP = no penultimate hop POP
M = Mapping server
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
I = Inter Area flag
A = Attached flag
===============================================================================
*A:Dut-C# show router ospf routes alternative detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Route Table (alternative) (detail)
===============================================================================
Destination Type(Dest) Stat SID SIDflgs
NHIP NHIF Cost[E2] Area Type Weight:Cfg/Norm
A-NHIP(L) A-NHIF A-Cost[E2] A-Type PGID
-------------------------------------------------------------------------------
1.1.1.1/32 IA (HOST) N (R)
1.1.3.1 3 1000 0.0.0.1
1.2.3.2(L) 4 2000 LINK 0x410079
1.1.2.0/24 IA (NET) N (R)
1.1.3.1 3 2000 0.0.0.1
1.2.3.2 4 2000 0.0.0.1
1.1.3.0/24 IA (NET) D (F)
DIRECT 3 1000 0.0.0.1
1.2.3.0/24 IA (NET) D (F)
DIRECT 4 1000 0.0.0.1
1.2.4.0/24 IA (NET) N (R)
2.2.3.2 5
===============================================================================
*A:Dut-C# show router ospf 1 routes exclude-shortcut alternative detail
=======================================================================
Rtr Base OSPFv2 Instance 1 Route Table (excl-shortcut) (alternative) (detail)
=======================================================================
Destination Type(Dest) Stat
NHIP NHIF Cost[E2] Area Tunnel-Information
A-NHIP(L) A-NHIF A-Cost[E2] A-Type PGID
-----------------------------------------------------------------------
1.1.2.0/24 IA (NET) N (R)
1.1.3.1 3 20 0.0.0.0
1.2.3.2 4 20 0.0.0.0
1.1.3.0/24 IA (NET) D (F)
DIRECT 3 10 0.0.0.0
1.2.3.0/24 IA (NET) D (F)
DIRECT 4 10 0.0.0.0
1.2.4.0/24 IA (NET) N (R)
1.2.3.2 4 20 0.0.0.0
1.3.5.0/24 IA (NET) D (F)
DIRECT 5 10 0.0.0.0
1.4.5.0/24 IA (NET) N (R)
1.3.5.5 5 20 0.0.0.0
1.4.6.0/24 IA (NET) N (R)
1.2.3.2 4 30 0.0.0.0
1.3.5.5 5 30 0.0.0.0
10.20.1.1/32 IA (HOST) N (R)
1.1.3.1 3 10 0.0.0.0
10.20.1.2/32 IA (HOST) N (R)
1.2.3.2 4 10 0.0.0.0
10.20.1.3/32 IA (HOST) D (F)
DIRECT 1 0 0.0.0.0
10.20.1.4/32 IA (HOST) N (R)
1.2.3.2 4 20 0.0.0.0
1.3.5.5 5 20 0.0.0.0
10.20.1.5/32 IA (HOST) N (R)
1.3.5.5 5 10 0.0.0.0
10.20.1.6/32 IA (HOST) N (R)
1.2.3.2 4 30 0.0.0.0
1.3.5.5 5 30 0.0.0.0
10.20.1.1/0 IA (RTR) N (N)
1.1.3.1 3 10 0.0.0.0
10.20.1.2/0 IA (RTR) N (N)
1.2.3.2 4 10 0.0.0.0
10.20.1.4/0 IA (RTR) N (N)
1.2.3.2 4 20 0.0.0.0
1.3.5.5 5 20 0.0.0.0
10.20.1.5/0 IA (RTR) N (N)
1.3.5.5 5 10 0.0.0.0
10.20.1.6/0 IA (RTR) N (N)
1.2.3.2 4 30 0.0.0.0
1.3.5.5 5 30 0.0.0.0
-----------------------------------------------------------------------
No. of routes found: 18 (24 paths)
Flags: L = Loop-Free Alternate nexthop
Stat: D = direct N = not direct
(RTM stat):(R) = added (F) = add failed
(N) = not added (D) = policy discarded
=======================================================================
*A:Dut-C#
*A:Dut-A# show router ospf routes alternative detail
=======================================================================
Rtr Base OSPFv2 Instance 0 Route Table (alternative) (detail)
=======================================================================
Destination Type(Dest) Stat
NHIP NHIF Cost[E2] Area Tunnel-Information
A-NHIP(L) A-NHIF A-Cost[E2] A-Type PGID
-----------------------------------------------------------------------
1.1.2.0/24 IA (NET) D (F)
DIRECT 2 10 0.0.0.0
1.1.3.0/24 IA (NET) D (F)
DIRECT 3 10 0.0.0.0
1.2.3.0/24 IA (NET) N (R)
1.1.2.2 2 20 0.0.0.0
1.1.3.3 3 20 0.0.0.0
1.2.4.0/24 IA (NET) N (R)
1.1.2.2 2 20 0.0.0.0
1.1.3.3(L) 3 30 LINK 0x130015
1.3.5.0/24 IA (NET) N (R)
1.1.3.3 3 20 0.0.0.0
1.1.2.2(L) 2 30 LINK 0x130016
1.4.5.0/24 IA (NET) N (R)
1.1.2.2 2 30 0.0.0.0
1.1.3.3 3 30 0.0.0.0
1.4.6.0/24 IA (NET) N (R)
1.1.2.2 2 30 0.0.0.0
1.1.3.3(L) 3 40 LINK 0x130015
1.5.6.0/24 IA (NET) N (R)
1.1.3.3 3 30 0.0.0.0
1.1.2.2(L) 2 40 LINK 0x130016
10.20.1.1/32 IA (HOST) D (F)
DIRECT 1 0 0.0.0.0
10.20.1.2/32 IA (HOST) N (R)
1.1.2.2 2 10 0.0.0.0
1.1.3.3(L) 3 20 LINK 0x130015
10.20.1.3/32 IA (HOST) N (R)
1.1.3.3 3 10 0.0.0.0
1.1.2.2(L) 2 20 LINK 0x130016
10.20.1.4/32 IA (HOST) N (R)
1.1.2.2 2 20 0.0.0.0
1.1.3.3(L) 3 30 LINK 0x130015
10.20.1.5/32 IA (HOST) N (R)
1.1.3.3 3 20 0.0.0.0
1.1.2.2(L) 2 30 LINK 0x130016
10.20.1.3/0 IA (RTR) N (N)
1.1.3.3 3 10 0.0.0.0
10.20.1.4/0 IA (RTR) N (N)
1.1.2.2 2 20 0.0.0.0
10.20.1.5/0 IA (RTR) N (N)
1.1.3.3 3 20 0.0.0.0
10.20.1.6/0 IA (RTR) N (N)
1.1.3.3 3 30 0.0.0.0
1.1.2.2 2 30 0.0.0.0
-----------------------------------------------------------------------
19 OSPFv2 routes found (23 paths)
Flags: L = Loop-Free Alternate nexthop
=======================================================================
*A:Dut-C# show router ospf 1 routes 10.0.0.2/32 detail
================================================================================
Rtr Base OSPFv2 Instance 1 Routing Table (detail)
================================================================================
Destination Type(Dest) Stat
NHIP NHIF Cost[E2] Area Type Weight:Cfg/Norm
--------------------------------------------------------------------------------
10.0.0.2/32 E2 (HOST) N (R)
1.0.0.3 RSVP:94 9:10 0.0.0.0 Shortcut 40/20
1.0.0.3 RSVP:61442 9:10 0.0.0.0 Shortcut 2/ 1
--------------------------------------------------------------------------------
No. of routes found: 1 (2 paths)
Stat: D = direct N = not direct
(RTM stat):(R) = added (F) = add failed
(N) = not added (D) = policy discarded
================================================================================
*A:Dut-C>config>router>ospf3# show router ospf3 0 routes
===============================================================================
Rtr Base OSPFv3 Instance 0 Route Table
===============================================================================
Destination Type(Dest) Stat
SID SID flags
NHIP NHIF Cost[E2]
-------------------------------------------------------------------------------
3ffe::100:900/120 IA (STUB) D (F)
DIRECT 4 200
3ffe::100:b01/128 IA (HOST) N (R)
4 NnPA
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 100
3ffe::100:c00/120 IA (STUB) N (R)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200
3ffe::100:d00/120 IA (STUB) D (F)
DIRECT 2 100
3ffe::100:1602/128 IA (HOST) N (R)
5 NnPA
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200
3ffe::100:1800/120 IE (NET) N (R)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300
3ffe::100:1a00/120 IE (NET) N (R)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200
3ffe::100:2103/128 IA (HOST) D (F)
0 NnPA
DIRECT 5 0
3ffe::100:2400/120 IA (STUB) D (F)
DIRECT 3 100
3ffe::100:2c04/128 IE (HOST) N (R)
1 NnP
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300
3ffe::100:2d00/120 IE (NET) N (R)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 300
3ffe::100:3705/128 IE (HOST) N (R)
2 NnP
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200
3ffe::100:3800/120 IE (NET) N (R)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200
3ffe::100:4206/128 IA (HOST) N (R)
3 NnPA
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 100
3ffe::a14:101/128 IA (HOST) N (R)
10 NnPA
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 100
3ffe::a14:102/128 IE (HOST) N (R)
11 NnPA
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200
3ffe::a14:103/128 IA (HOST) D (F)
6 NnPA
DIRECT 1 0
3ffe::a14:104/128 IE (HOST) N (R)
7 NnP
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300
3ffe::a14:105/128 IE (HOST) N (R)
8 NnP
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200
3ffe::a14:106/128 IE (HOST) N (R)
9 NnPA
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 100
3ffe::3300:b01/128 IA (HOST) N (R)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 100
3ffe::3300:c00/120 IA (STUB) N (R)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200
3ffe::3300:d00/120 IA (STUB) D (F)
DIRECT 2 100
3ffe::3300:1602/128 IA (HOST) N (R)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200
3ffe::3300:1800/120 IE (NET) N (R)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300
3ffe::3300:1a00/120 IE (NET) N (R)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200
3ffe::3300:2103/128 IA (HOST) D (F)
DIRECT 5 0
3ffe::3300:2400/120 IA (STUB) D (F)
DIRECT 3 100
3ffe::3300:2c04/128 IE (HOST) N (R)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300
3ffe::3300:2d00/120 IE (NET) N (R)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 300
3ffe::3300:3705/128 IE (HOST) N (R)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200
3ffe::3300:3800/120 IE (NET) N (R)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200
3ffe::3300:4206/128 IA (HOST) N (R)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 100
3ffe::6800:1/128 E2 (HOST) N (R)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300:1
3ffe::6900:1/128 E2 (HOST) N (R)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200:1
10.20.1.1/0 IA (RTR) N (N)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 100
10.20.1.2/0 IA (AB-AS) N (N)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200
10.20.1.4/0 IE (ASBR) N (N)
fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300
10.20.1.5/0 IE (ASBR) N (N)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200
10.20.1.6/0 IA (AB-AS) N (N)
fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 100
-------------------------------------------------------------------------------
No. of routes found: 40 (40 paths)
Stat: D = direct N = not direct
(RTM stat):(R) = added (F) = add failed
(N) = not added (D) = policy discarded
SID Flags : N = Node-SID
nP = no penultimate hop POP
M = Mapping server
E = Explicit-Null
V = Prefix-SID carries a value
L = value/index has local significance
I = Inter Area flag
A = Attached flag
B = Backup flag
===============================================================================
*A:Dut-C# show router ospf3 31 routes detail
===============================================================================
Rtr Base OSPFv3 Instance 31 Route Table (detail)
===============================================================================
Destination Type(Dest) Stat
NHIP NHIF Cost[E2] Area
-------------------------------------------------------------------------------
3ffe::10:10:2:0/120 IA (NET) D (F)
DIRECT 2 1000 0.0.0.0
3ffe::10:10:3:0/120 IA (NET) D (F)
DIRECT 3 1000 0.0.0.0
3ffe::10:10:4:0/120 IA (NET) N (R)
fe80::2052:1ff:fe01:3-"ip-10.10.3.3" 3 2000 0.0.0.0
3ffe::10:10:5:0/120 IA (NET) D (F)
DIRECT 4 1000 0.0.0.0
3ffe::10:10:6:0/120 IA (NET) N (R)
fe80::205e:1ff:fe01:1-"ip-10.10.5.3" 4 2000 0.0.0.0
3ffe::10:10:9:0/120 IA (NET) N (R)
10.20.1.4 (SC) RSVP:1 3000 0.0.0.0
3ffe::10:10:13:0/120 IA (STUB) N (R)
fe80::6628:1ff:fe01:2-"ip-10.10.2.3" 2 2000 0.0.0.0
3ffe::10:10:14:0/120 IA (STUB) N (R)
10.20.1.4 (SC) RSVP:1 4000 0.0.0.0
3ffe::10:20:1:1/128 IA (HOST) N (R)
fe80::6628:1ff:fe01:2-"ip-10.10.2.3" 2 1000 0.0.0.0
3ffe::10:20:1:2/128 IA (HOST) N (R)
fe80::2052:1ff:fe01:3-"ip-10.10.3.3" 3 1000 0.0.0.0
3ffe::10:20:1:3/128 IA (HOST) D (F)
DIRECT 1 0 0.0.0.0
3ffe::10:20:1:4/128 IA (HOST) N (R)
10.20.1.4 (SC) RSVP:1 2000 0.0.0.0
3ffe::10:20:1:5/128 IA (HOST) N (R)
fe80::205e:1ff:fe01:1-"ip-10.10.5.3" 4 1000 0.0.0.0
3ffe::10:20:1:6/128 IA (HOST) N (R)
10.20.1.4 (SC) RSVP:1 3000 0.0.0.0
3ffe::100:100:100:4/128 IA (HOST) N (R)
10.20.1.4 (SC) RSVP:1 2000 0.0.0.0
3ffe::100:100:100:6/128 IA (HOST) N (R)
10.20.1.4 (SC) RSVP:1 3000 0.0.0.0
10.20.1.1/0 IA (RTR) N (N)
fe80::6628:1ff:fe01:2-"ip-10.10.2.3" 2 1000 0.0.0.0
10.20.1.2/0 IA (RTR) N (N)
fe80::2052:1ff:fe01:3-"ip-10.10.3.3" 3 1000 0.0.0.0
10.20.1.4/0 IA (RTR) N (N)
10.20.1.4 (SC) RSVP:1 2000 0.0.0.0
10.20.1.5/0 IA (RTR) N (N)
fe80::205e:1ff:fe01:1-"ip-10.10.5.3" 4 1000 0.0.0.0
10.20.1.6/0 IA (RTR) N (N)
10.20.1.4 (SC) RSVP:1 3000 0.0.0.0
-------------------------------------------------------------------------------
No. of routes found: 21 (21 paths)
Stat: D = direct N = not direct
(RTM stat):(R) = added (F) = add failed
(N) = not added (D) = policy discarded
===============================================================================
*A:Dut-C#
*A:Dut-C# show router ospf3 20 status
===============================================================================
Rtr Base OSPFv3 Instance 20 Status
===============================================================================
OSPF Cfg Router Id : 10.20.1.3
OSPF Oper Router Id : 10.20.1.3
OSPF Version : 3
OSPF Admin Status : Enabled
OSPF Oper Status : Enabled
Graceful Restart : Disabled
GR Helper Mode : Disabled
GR Strict LSA Checking : Enabled (operational down)
Preference : 10
External Preference : 150
Backbone Router : True
Area Border Router : False
AS Border Router : False
Traffic Engineering Support : False
Demand Exts Support : False
In Overload State : False
In External Overflow State : False
Exit Overflow Interval : 0
Last Overflow Entered : Never
Last Overflow Exit : Never
External LSA Limit : -1
Reference Bandwidth : 100,000,000 Kbps
Init SPF Delay : 1000 msec
Sec SPF Delay : 1000 msec
Max SPF Delay : 10000 msec
Min LS Arrival Interval : 1000 msec
Init LSA Gen Delay : 5000 msec
Sec LSA Gen Delay : 5000 msec
Max LSA Gen Delay : 5000 msec
Lsa accumulate : 1000 msec
Redistribute delay : 1000 msec
Incremental SPF wait : 1000 msec
Last Ext SPF Run : Never
Ext LSA Cksum Sum : 0x0
OSPF Last Enabled : 10/10/2018 20:22:05
Unicast Import : True
Multicast Import : False
Export Policies : None
Import Policies : None
Lfa Policies : None
OSPF Ldp Sync Admin Status : Enabled
LDP-over-RSVP : Disabled
IGP-Shortcut : Enabled
IPv6 IGP SC Tunn-Nhop : Res-Filter(RSVP)
Advertise-Tunnel-Link : Disabled
LFA : Disabled
Remote-LFA : Disabled
Max PQ Cost : 65535
TI-LFA : Disabled
Max SR FRR Labels : 2
Export Limit : 0
Export Limit Log Percent : 0
Total Exp Routes : 0
RIB-priority-high prefix list: None
Segment Routing : Disabled
Extended LSA : sparse
===============================================================================
routing
routing
Syntax
routing [sub-domain sub-domain] [bsl bsl] [neighbor-prefix ip-address] [dest-prefix ip-address]
Context
[Tree] (show>router>bier routing)
Full Context
show router bier routing
Description
This command shows the BIER routing table.
Parameters
- sub-domain
-
Specifies a sub-domain.
- bsl
-
Specifies a bit string length.
- ip-address
-
Specifies a prefix in IP address format.
Platforms
All
Output
The following output is an example of a BIER router table. BIER Routing Fields provides BIER routing field descriptions.
Output Example*A:Dut-A# show router bier routing sub-domain 0
===============================================================================
Destination Prefix Bfr-ID Age
Neighbor
Nexthop
Interface
-------------------------------------------------------------------------------
===============================================================================
BIER Routing Database Sub-Domain 0 BSL 256
===============================================================================
10.20.1.2 2 0d 23:05:23
10.20.1.2
10.180.1.2
ip-10.180.1.1
10.20.1.3 3 0d 23:05:20
10.20.1.2
10.180.1.2
ip-10.180.1.1
10.20.1.4 0 0d 23:05:20
10.20.1.2
10.180.1.2
ip-10.180.1.1
10.20.1.5 5 0d 23:05:16
10.20.1.2
10.180.1.2
ip-10.180.1.1
10.20.1.6 6 0d 23:05:16
10.20.1.2
10.180.1.2
ip-10.180.1.1
===============================================================================
Total (Sub-Domain 0): 5
===============================================================================
Total BIER Routing entries : 5
===============================================================================
*A:Dut-A#
|
Label |
Description |
|---|---|
|
Destination Prefix |
The destination prefix |
|
BFR-ID |
The BFR ID |
|
Age |
The tunnel age |
|
Neighbor |
The neighbor IP address |
|
Nexthop |
The next-hop IP address |
|
Interface |
The egress interface name for the programmed tunnel |
rp
rp
Syntax
rp [family | ip-address]
Context
[Tree] (show>router>pim rp)
Full Context
show router pim rp
Description
This command displays the rendezvous point (RP) set information built by the router.
Parameters
- family
-
Displays information about RP family.
- ip-address
-
Specifies the IP address of the RP.
Platforms
All
Output
The following output is an example of a PIM RP configuration.
Output ExampleA:ALA-1# show router pim rp
==================================================================
PIM RP Set
==================================================================
Group Address RP Address Type Priority Holdtime
------------------------------------------------------------------
224.0.0.0/4 239.200.200.4 Dynamic 192 150
10.1.7.1 Static 1 N/A
------------------------------------------------------------------
Group Prefixes : 1
==================================================================
A:ALA-1#
A:ALA-1# show router pim rp 10.1.7.1
==================================================================
PIM RP Set
==================================================================
Group Address RP Address Type Priority Holdtime
------------------------------------------------------------------
224.0.0.0/4 10.1.7.1 Static 1 N/A
------------------------------------------------------------------
Group Prefixes : 1
==================================================================
A:ALA-1#
|
Label |
Description |
|---|---|
|
Group Address |
The multicast group address of the entry. |
|
RP Address |
The address of the Rendezvous Point (RP) |
|
Type |
Displays whether the entry was learned through the Bootstrap mechanism or if it was statically configured. |
|
Priority |
The priority for the specified group address. The higher the value, the higher the priority. |
|
Holdtime |
The value of the hold time present in the BSM message |
rp-hash
rp-hash
Syntax
rp-hash ip-address
Context
[Tree] (show>router>pim rp-hash)
Full Context
show router pim rp-hash
Description
This command hashes the RP for the specified group from the RP set.
Parameters
- ip-address
-
Displays specific multicast group addresses.
Platforms
All
Output
The following output is an example of a PIM RP-Hash configuration. RP-Hash Fields provides RP-Hash output field descriptions.
Output ExampleA:ALA-1# show router pim rp-hash 239.101.0.0
==============================================
PIM Group-To-RP mapping
==============================================
Group Address RP Address Type
----------------------------------------------
239.101.0.0 239.200.200.4 Bootstrap
==============================================
A:ALA-1#
A:ALA-1# show router pim rp-hash 239.101.0.6
==============================================
PIM Group-To-RP mapping
==============================================
Group Address RP Address Type
----------------------------------------------
239.101.0.6 239.200.200.4 Bootstrap
==============================================
A:ALA-1#
|
Label |
Description |
|---|---|
|
Group Address |
The multicast group address of the entry |
|
RP Address |
The address of the Rendezvous Point (RP) |
|
Type |
Specifies whether the entry was learned through the Bootstrap mechanism or if it was statically configured. |
rpki-session
rpki-session
Syntax
rpki-session [ip-address] [detail]
Context
[Tree] (show>router>origin-validation rpki-session)
Full Context
show router origin-validation rpki-session
Description
This command displays RPKI session information.
Parameters
- ip-address
-
Displays RPKI session information for the specified IP address.
- detail
-
Displays the longer, more detailed version of the output.
Platforms
All
Output
The following output is an example of RPKI session information.
Output ExampleA:Dut-C# show router origin-validation rpki-session detail
===============================================================================
RPKI Session Information
===============================================================================
IP Address : 10.168.1.1
Description : RPKI Server #1
-------------------------------------------------------------------------------
Port : 323 Oper State : established
Uptime : 0d 00:57:41 Flaps : 0
Active IPv4 Records: 17023 Active IPv6 Records: 2515
Admin State : Up Local Address : n/a
Admin State : Up Local Address : 10.0.2.2
Hold Time : 120 Refresh Time : 60
Stale Route Time : 3600 Connect Retry : 120
Serial ID : 41690 Session ID : 1452020198
===============================================================================
No. of Sessions : 1
===============================================================================
rs-fec
rs-fec
Syntax
rs-fec [clear]
Context
[Tree] (tools>dump>port rs-fec)
Full Context
tools dump port rs-fec
Description
This command dumps the Reed-Solomon Forward Error Correction (RS-FEC) information for port.
Platforms
All
rsb
rsb
Syntax
rsb
Context
[Tree] (tools>dump>router>rsvp rsb)
Full Context
tools dump router rsvp rsb
Description
This command displays RSVP RSB information.
Platforms
All
Output
The following output is an example of MPLS RSVP RSB detail fields.
Output Example4)*A:Dut-A>config>router>mpls>lsp$ /tools dump router rsvp rsb detail
-----------------------------------------------------------------------
RSB:
EndPt 10.20.1.4 Tid 61441 XTid 10.20.1.1 Sndr 10.20.1.1 LspId 2 ifIndex 3 NHop
10.20.1.3
Style FF, refresh in 0 secs
RSVP NextHop 10.20.1.3, LIH 3 (TLV: RtrId 10.20.1.3 IntfId 2)
CT Shared Reservation Info:
No Reservation:
FlowSpec :Flags 0x8000 QOSC 1, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps)
CBS 0, EBS 0, RSpecR 0, RSpecS 0 MTU 1500 MPU 20
FwdFlowspec :Flags 0x0 QOSC 0, PDR (0.000 bps), PBS 0.000 bps, CDR (0.000 bps)
CBS 0, EBS 0, RSpecR 0, RSpecS 0 MPU 0
FilterSpec:
Timeout in : 26 secs, LocLabel: 0 Sender: 10.20.1.1 lspId: 2 OutIfId: 0
RRO :
(1) * Flags : 0x0 : U
(1) * UnInf : 10.20.1.3, 2
(2) * Flags : 0x1 : Global
(2) * Label : 131070
(3) * Flags : 0x0 : U
(3) * UnInf : 10.20.1.4, 5
(4) * Flags : 0x1 : Global
(4) * Label : 131070
-----------------------------------------------------------------------
-----------------------------------------------------------------------
RSB:
EndPt 10.20.1.6 Tid 1 XTid 10.20.1.1 Sndr 0.0.0.0 LspId 0 ifIndex 2 NHop
10.20.1.2
Style SE, refresh in 0 secs
RSVP NextHop 10.20.1.2, LIH 2 (TLV: RtrId 10.20.1.2 IntfId 2)
CT Shared Reservation Info:
No Reservation:
FlowSpec :Flags 0x8000 QOSC 1, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps)
CBS 0, EBS 0, RSpecR 0, RSpecS 0 MTU 1496 MPU 20
FwdFlowspec :Flags 0x0 QOSC 0, PDR (0.000 bps), PBS 0.000 bps, CDR (0.000 bps)
CBS 0, EBS 0, RSpecR 0, RSpecS 0 MPU 0
FilterSpec:
Timeout in : 21 secs, LocLabel: 0 Sender: 10.20.1.1 lspId: 30208 OutIfId: 0
RRO :
(1) * Flags : 0x9 : U LP_AVAIL NODE
(1) * UnInf : 10.20.1.2, 2
(2) * Flags : 0x1 : Global
(2) * Label : 131071
(3) * Flags : 0x1 : U LP_AVAIL
(3) * UnInf : 10.20.1.4, 2
(4) * Flags : 0x1 : Global
(4) * Label : 131071
(5) * Flags : 0x0 : U
(5) * UnInf : 10.20.1.6, 2
(6) * Flags : 0x1 : Global
(6) * Label : 131071
-----------------------------------------------------------------------
Total RSB Count : 2
rsvp
rsvp
Syntax
rsvp
Context
[Tree] (clear>router rsvp)
Full Context
clear router rsvp
Description
Commands in this context clear and reset RSVP protocol entities.
Platforms
All
rsvp
Syntax
rsvp
Context
[Tree] (show>router rsvp)
Full Context
show router rsvp
Description
Commands in this context display RSVP related information.
Platforms
All
rsvp
Syntax
rsvp
Context
[Tree] (tools>dump>router rsvp)
Full Context
tools dump router rsvp
Description
Commands in this context dump tools for RSVP.
Platforms
All
rsvp
Syntax
rsvp
Context
[Tree] (monitor>router rsvp)
Full Context
monitor router rsvp
Description
Commands in this context monitor RSVP instances.
Platforms
All
rsvp-te
rsvp-te
Syntax
rsvp-te
Context
[Tree] (clear>router>mpls>lsp>auto-lsp rsvp-te)
Full Context
clear router mpls lsp auto-lsp rsvp-te
Description
This command resets and restarts all auto RSVP-TE LSPs.
Platforms
All
rsvp-te
Syntax
rsvp-te
Context
[Tree] (clear>router>mpls>lsp rsvp-te)
Full Context
clear router mpls lsp rsvp-te
Description
This command resets and restarts all RSVP-TE LSPs.
Platforms
All
rtp-session
rtp-session
Syntax
rtp-session [service service-id] [source ip-address] [detail [stats {rt-server | fcc-server}]]
rtp-session [service service-id] summary
Context
[Tree] (show>video rtp-session)
Full Context
show video rtp-session
Description
This command displays video session information.
Parameters
- service service-id
-
Displays video session information pertaining to the specified service ID.
- source ip-address
-
Displays session information for the specified IP address.
- detail
-
The output displays detailed video session information.
- stats
-
Displays video session statistics.
- summary
-
The output displays summarized video session information.
Platforms
7450 ESS, 7750 SR-1, 7750 SR-7/12/12e, 7750 SR-1s, 7750 SR-2s, 7750 SR-7s, 7750 SR-14s
Output
The following output is an example of this command.
Output Example*A:Dut-C# show video rtp-session
===============================================================================
Video RTP session
===============================================================================
Service Id Source address SSRC Id (hex) RT reqs FCC reqs
Interface Source Port Time to expire RT replies FCC replies
-------------------------------------------------------------------------------
1 10.0.103.103 1 0 226
vi 1000 0d 00:03:24 0 225
1 10.0.103.103 1 0 226
vi 1001 0d 00:03:24 0 225
1 10.0.103.103 1 0 226
vi 1002 0d 00:03:24 0 225
1 10.0.103.103 1 0 226
vi 1003 0d 00:03:24 0 225
1 10.0.103.103 1 0 226
vi 1004 0d 00:03:24 0 225
1 10.0.103.103 1 0 226
vi 1005 0d 00:03:24 0 225
1 10.0.103.103 1 0 226
vi 1006 0d 00:03:24 0 225
1 10.0.103.103 1 0 226
vi 1007 0d 00:03:24 0 225
1 10.0.103.103 1 0 226
vi 1008 0d 00:03:24 0 225
1 10.0.103.103 1 0 226
vi 1009 0d 00:03:24 0 225
-------------------------------------------------------------------------------
Number of RTP sessions : 10
===============================================================================
*A:Dut-C#
*A:Dut-C# show video rtp-session summary
===============================================================================
Video RTP session summary
===============================================================================
Num Sessions : 2000
Rx RT Requests : 0 Tx RT Packets : 0
Tx RT Replies : 0 Tx RT Octets : 0
Rx FCC Requests : 371068 Tx FCC Packets : 243011904
Tx FCC Replies : 368259 Tx FCC Octets : 14152149376
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show video rtp-session detail
===============================================================================
Video RTP session detail
===============================================================================
Service Id : 1
Interface : vi
Source Address : 10.0.103.103 Source Port : 1000
Destination Addr : 10.3.3.3 SSRC Id (hex) : 1
CName : ixiaPort
Up Time : 0d 00:07:08 Time to Expire : 0d 00:04:59
Num RT Requests : 0 Num RT Replies : 0
RT Packets Sent : 0 RT Octets Sent : 0
RT Failed Pkts : 0 Req RTP Packets : 0
Num FCC Requests : 212 Num FCC Replies : 211
FCC Packets Sent : 138582 FCC Octets Sent : 8145140
FCC Failed Pkts : 1
-------------------------------------------------------------------------------
*A:Dut-C#
rtr-advertisement
rtr-advertisement
Syntax
rtr-advertisement [interface interface-name] [prefix ipv6-prefix[/prefix-length]]
rtr-advertisement [conflicts]
Context
[Tree] (show>router rtr-advertisement)
Full Context
show router rtr-advertisement
Description
This command displays router advertisement information.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
- interface-name
-
Specifies the interface name, up to 32 characters.
- ipv6-prefix[/prefix-length]
-
Displays routes only matching the specified ip-address and length and only applies to the 7750 SR and 7950 XRS.
Platforms
All
Output
Router-Advertisement Table Output — The following output is an example of router advertisement information, and Router Advertisement Table Fields describes the fields.
Output ExampleA:Dut-A# show router rtr-advertisement
=======================================================================
Router Advertisement
=======================================================================
-------------------------------------------------------------------------------
Interface: interfaceNetworkNonDefault
-------------------------------------------------------------------------------
Rtr Advertisement Tx : 8 Last Sent : 00h01m28s
Nbr Solicitation Tx : 83 Last Sent : 00h00m17s
Nbr Advertisement Tx : 74 Last Sent : 00h00m25s
Rtr Advertisement Rx : 8 Rtr Solicitation Rx : 0
Nbr Advertisement Rx : 83 Nbr Solicitation Rx : 74
-------------------------------------------------------------------------------
Server1 : 2001:db8::1
Server2 : N/A
Server3 : N/A
Server4 : N/A
Rdnss-lifetime : 1200 Include-dns : yes
-------------------------------------------------------------------------------
Max Advert Interval : 601 Min Advert Interval : 201
Managed Config : TRUE Other Config : TRUE
Reachable Time : 00h00m00s400ms Router Lifetime : 00h30m01s
Retransmit Time : 00h00m00s400ms Hop Limit : 63
Link MTU : 1500
Prefix: 211::/120
Autonomous Flag : FALSE On-link flag : FALSE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix: 231::/120
Autonomous Flag : FALSE On-link flag : FALSE
Preferred Lifetime : 49710d06h Valid Lifetime : 49710d06h
Prefix: 241::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s
Prefix: 251::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
-------------------------------------------------------------------------------
Advertisement from: fe80::200:ff:fe00:2
Managed Config : FALSE Other Config : FALSE
Reachable Time : 00h00m00s0ms Router Lifetime : 00h30m00s
Retransmit Time : 00h00m00s0ms Hop Limit : 64
Link MTU : 0
-------------------------------------------------------------------------------
Interface: interfaceServiceNonDefault
-------------------------------------------------------------------------------
Rtr Advertisement Tx : 8 Last Sent : 00h06m41s
Nbr Solicitation Tx : 166 Last Sent : 00h00m04s
Nbr Advertisement Tx : 143 Last Sent : 00h00m05s
Rtr Advertisement Rx : 8 Rtr Solicitation Rx : 0
Nbr Advertisement Rx : 166 Nbr Solicitation Rx : 143
-------------------------------------------------------------------------------
Max Advert Interval : 601 Min Advert Interval : 201
Managed Config : TRUE Other Config : TRUE
Reachable Time : 00h00m00s400ms Router Lifetime : 00h30m01s
Retransmit Time : 00h00m00s400ms Hop Limit : 63
Link MTU : 1500
Prefix: 23::/120
Autonomous Flag : FALSE On-link flag : FALSE
Preferred Lifetime : infinite Valid Lifetime : infinite
Prefix: 24::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s
Prefix: 25::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
-------------------------------------------------------------------------------
Advertisement from: fe80::200:ff:fe00:2
Managed Config : FALSE Other Config : FALSE
Reachable Time : 00h00m00s0ms Router Lifetime : 00h30m00s
Retransmit Time : 00h00m00s0ms Hop Limit : 64
Link MTU : 0
Prefix: 2::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix: 23::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix: 24::/119
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix: 25::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : infinite
Prefix: 231::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
-------------------------------------------------------------------------------
...
A:Dut-A#
|
Label |
Description |
|---|---|
|
Rtr Advertisement Tx/Last Sent |
The number of router advertisements sent and time since they were sent |
|
Nbr Solicitation Tx |
The number of neighbor solicitations sent and time since they were sent |
|
Nbr Advertisement Tx |
The number of neighbor advertisements sent and time since they were sent |
|
Rtr Advertisement Rx |
The number of router advertisements received and time since they were received |
|
Nbr Advertisement Rx |
The number of neighbor advertisements received and time since they were received |
|
Max Advert Interval |
The maximum interval between sending router advertisement messages |
|
Managed Config |
True — indicates that DHCPv6 has been configured |
|
False — indicates that DHCPv6 is not available for address configuration |
|
|
Reachable Time |
The time, in milliseconds, that a node assumes a neighbor is reachable after receiving a reachability confirmation |
|
Retransmit Time |
The time, in milliseconds, between retransmitted neighbor solicitation messages |
|
Link MTU |
The MTU number the nodes use for sending packets on the link |
|
Rtr Solicitation Rx |
The number of router solicitations received and time since they were received |
|
Nbr Solicitation Rx |
The number of neighbor solicitations received and time since they were received |
|
Min Advert Interval |
The minimum interval between sending ICMPv6 neighbor discovery router advertisement messages |
|
Other Config |
True — indicates there are other stateful configurations False — indicates there are no other stateful configurations |
|
Router Lifetime |
Displays the router lifetime in seconds |
|
Hop Limit |
Displays the current hop limit |
Router-Advertisement Conflicts Output — The following output is an example of router advertisement conflicts, and Router-Advertisement Conflicts Fields describes the fields.
Output ExampleA:Dut-A# show>router# rtr-advertisement conflicts
===============================================================================
Router Advertisement
===============================================================================
Interface: interfaceNetworkNonDefault
-------------------------------------------------------------------------------
Advertisement from: fe80::200:ff:fe00:2
Managed Config : FALSE [TRUE]
Other Config : FALSE [TRUE]
Reachable Time : 00h00m00s0ms [00h00m00s400ms]
Router Lifetime : 00h30m00s [00h30m01s]
Retransmit Time : 00h00m00s0ms [00h00m00s400ms]
Hop Limit : 64 [63]
Link MTU : 0 [1500]
Prefix not present in neighbor router advertisement
Prefix: 211::/120
Autonomous Flag : FALSE On-link flag : FALSE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix not present in neighbor router advertisement
Prefix: 231::/120
Autonomous Flag : FALSE On-link flag : FALSE
Preferred Lifetime : 49710d06h Valid Lifetime : 49710d06h
Prefix not present in neighbor router advertisement
Prefix: 241::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s
Prefix not present in neighbor router advertisement
Prefix: 251::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
-------------------------------------------------------------------------------
Interface: interfaceServiceNonDefault
-------------------------------------------------------------------------------
Advertisement from: fe80::200:ff:fe00:2
Managed Config : FALSE [TRUE]
Other Config : FALSE [TRUE]
Reachable Time : 00h00m00s0ms [00h00m00s400ms]
Router Lifetime : 00h30m00s [00h30m01s]
Retransmit Time : 00h00m00s0ms [00h00m00s400ms]
Hop Limit : 64 [63]
Link MTU : 0 [1500]
Prefix not present in own router advertisement
Prefix: 2::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix: 23::/120
Autonomous Flag : TRUE [FALSE]
On-link flag : TRUE [FALSE]
Preferred Lifetime: 07d00h00m [infinite]
Valid Lifetime : 30d00h00m [infinite]
Prefix not present in own router advertisement
Prefix: 24::/119
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix not present in neighbor router advertisement
Prefix: 24::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s
Prefix: 25::/120
Valid Lifetime : infinite [30d00h00m]
Prefix not present in own router advertisement
Prefix: 231::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
===============================================================================
A:Dut-A#
|
Label |
Description |
|---|---|
|
Advertisement from |
The address of the advertising router |
|
Reachable Time |
The time, in milliseconds, that a node assumes a neighbor is reachable after receiving a reachability confirmation |
|
Router Lifetime |
Displays the router lifetime in seconds |
|
Retransmit Time |
The time, in milliseconds, between retransmitted neighbor solicitation messages |
|
Hop Limit |
Displays the current hop limit |
|
Link MTU |
The MTU number the nodes use for sending packets on the link |
run-manual-spf
run-manual-spf
Syntax
run-manual-spf
Context
[Tree] (tools>perform>router>isis run-manual-spf)
Full Context
tools perform router isis run-manual-spf
Description
This command runs the Shortest Path First (SPF) algorithm.
Platforms
All
run-manual-spf
Syntax
run-manual-spf [externals-only]
Context
[Tree] (tools>perform>router>ospf run-manual-spf)
[Tree] (tools>perform>router>ospf3 run-manual-spf)
Full Context
tools perform router ospf run-manual-spf
tools perform router ospf3 run-manual-spf
Description
This command runs the Shorted Path First (SPF) algorithm.
Parameters
- externals-only
-
Runs external only SPF.
Platforms
All