aps commands
configure
— aps number
— advertise-interval number
— annexb
— wait-to-restore-time number
— working-circuit reference
— apply-groups reference
— apply-groups-exclude reference
— hold-time number
— neighbor (ipv4-address-no-zone | ipv6-address-no-zone)
— protect-circuit reference
— revert
— time number
— switching-mode keyword
— working-circuit reference
aps command descriptions
aps [group-id] number
[group-id] number
advertise-interval number
| Synopsis | Time between subsequent advertisement messages | |
| Context | configure aps number advertise-interval number | |
| Tree | advertise-interval | |
| Range | 10 to 650 | |
| Units | deciseconds | |
| Default | 10 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e |
annexb
wait-to-restore-time number
| Synopsis | Annex B mode operation wait to restore time | |
| Context | configure aps number annexb wait-to-restore-time number | |
| Tree | wait-to-restore-time | |
Description | This command specifies the delay after which the newly active section becomes the primary section after a switchover from the primary section to the secondary section occurs and the switch request clears normally. | |
| Range | 0 to 3600 | |
| Units | seconds | |
| Default | 300 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e |
working-circuit reference
| Synopsis | Working circuit port for the APS group | |
| Context | configure aps number annexb working-circuit reference | |
| Tree | working-circuit | |
Reference | configure port port | |
| Max. instances | 2 | |
Notes | This element is ordered by the user. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e |
hold-time number
neighbor (ipv4-address-no-zone | ipv6-address-no-zone)
| Synopsis | Neighbor IP address for multi-chassis APS | |
| Context | configure aps number neighbor (ipv4-address-no-zone | ipv6-address-no-zone) | |
| Tree | neighbor | |
Notes | The following elements are part of a choice: annexb or (neighbor, protect-circuit, revert, and working-circuit). | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e |
protect-circuit reference
| Synopsis | Protection circuit port for the APS group | |
| Context | configure aps number protect-circuit reference | |
| Tree | protect-circuit | |
Reference | configure port port | |
Notes | The following elements are part of a choice: annexb or (neighbor, protect-circuit, revert, and working-circuit). | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e |
revert
time number
switching-mode keyword
| Synopsis | Switching mode for the APS port | |
| Context | configure aps number switching-mode keyword | |
| Tree | switching-mode | |
| Options | ||
| Default | bi-directional | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e |
working-circuit reference
| Synopsis | Working circuit port for the APS group | |
| Context | configure aps number working-circuit reference | |
| Tree | working-circuit | |
Reference | configure port port | |
Notes | The following elements are part of a choice: annexb or (neighbor, protect-circuit, revert, and working-circuit). | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e |