fwd-path-ext commands

configure 
fwd-path-ext 
apply-groups reference
apply-groups-exclude reference
fpe number 
application 
mvpn-umh-rate-monitoring boolean
pw-port-extension 
interface-a 
qos 
network-policy reference
interface-b 
qos 
network-policy reference
srv6 
interface-a 
qos 
network-policy reference
interface-b 
mtu number
qos 
network-policy reference
type keyword
sub-mgmt-extension boolean
vxlan 
router-instance string
apply-groups reference
apply-groups-exclude reference
description description
multi-path 
path number 
apply-groups reference
apply-groups-exclude reference
pxc reference
xc-lag-a reference
xc-lag-b reference
path 
pxc reference
xc-lag-a reference
xc-lag-b reference
sdp-id-range 
apply-groups reference
apply-groups-exclude reference
end number
start number

fwd-path-ext command descriptions

fwd-path-ext

Synopsis Enter the fwd-path-ext context
Contextconfigure fwd-path-ext
Treefwd-path-ext

Description

Commands in this context configure a Forwarding Path Extension (FPE). Some applications that rely on PXC functionality utilize FPE to simplify the configuration of these applications.

Introduced16.0.R1

Platforms

All

fpe [fpe-id] number

Synopsis Enter the fpe list instance
Context configure fwd-path-ext fpe number
Treefpe

Description

Commands in this context configure the Forwarding Path Extension (FPE), which associates an application with a PXC (a paired set of PXC sub-ports or a paired set of PXC-based LAGs).

Introduced16.0.R1

Platforms

All

[fpe-id] number
Synopsis FPE ID
Contextconfigure fwd-path-ext fpe number
Treefpe
Range1 to 64

Notes

This element is part of a list key.

Introduced16.0.R1

Platforms

All

application
Synopsis Enter the application context
Context configure fwd-path-ext fpe number application
Treeapplication

Description

Commands in this context configure the attributes of the FPE application.

Introduced16.0.R1

Platforms

All

pw-port-extension
Synopsis Enable the pw-port-extension context
Contextconfigure fwd-path-ext fpe number application pw-port-extension
Treepw-port-extension

Description

Commands in this context configure the type of the cross-connect required to terminate an external tunnel to an anchored PW port. The system automatically builds the internal infrastructure required to perform the tunnel termination on a PW port.

PW ports support the following types of tunnels:

  • GRE/MPLS PW with SDP of type MPLS or GRE

  • L2oGRE bridged Ethernet over GRE, where GRE protocol number is 0x6558

Introduced22.2.R1

Platforms

All

interface-a
Synopsis Enter the interface-a context
Context configure fwd-path-ext fpe number application pw-port-extension interface-a
Treeinterface-a

Description

Commands in this context configure the command options for network interface-a of the PW port extension FPE.

Introduced22.10.R1

Platforms

All

interface-b
Synopsis Enter the interface-b context
Context configure fwd-path-ext fpe number application pw-port-extension interface-b
Treeinterface-b

Description

Commands in this context configure command options for network interface-b of the PW port extension FPE.

Introduced22.10.R1

Platforms

All

srv6
Synopsis Enable the srv6 context
Context configure fwd-path-ext fpe number application srv6
Treesrv6

Description

Commands in this context configure the SRv6 FPE application used for origination or termination of SRv6 tunnels. 

Introduced21.5.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

interface-a
Synopsis Enter the interface-a context
Context configure fwd-path-ext fpe number application srv6 interface-a
Treeinterface-a

Description

Commands in this context configure the parameters of network interface-a of the SRv6 FPE.

Introduced21.5.R2

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

qos
Synopsis Enter the qos context
Context configure fwd-path-ext fpe number application srv6 interface-a qos
Treeqos
Introduced21.5.R2

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

interface-b
Synopsis Enter the interface-b context
Context configure fwd-path-ext fpe number application srv6 interface-b
Treeinterface-b

Description

Commands in this context configure the parameters of network interface-b of the SRv6 FPE.

Introduced21.5.R2

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

mtu number
Synopsis MTU size of SRv6 origination FPE interface-b
Contextconfigure fwd-path-ext fpe number application srv6 interface-b mtu number
Treemtu

Description

This command configures the Maximum Transfer Unit (MTU) of interface-b of the SRv6 origination FPE.

The MTU is used to check if an IPv4 service packet should be fragmented and if an IPv6 service packet should be dropped when tunneled over SRv6.

The minimum value is the IPv6 minimum MTU value. The maximum value is set to the maximum Ethernet port MTU (9800) minus 14 bytes for Null Ethernet encapsulation.

Range0 | 1280 to 9786
Introduced21.5.R2

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

qos
Synopsis Enter the qos context
Context configure fwd-path-ext fpe number application srv6 interface-b qos
Treeqos
Introduced21.5.R2

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

type keyword
Synopsis SRv6 FPE application type
Context configure fwd-path-ext fpe number application srv6 type keyword
Treetype

Description

This command specifies if the SRv6 FPE application is used for origination or termination of SRv6 tunnels. 

A dedicated SRv6 FPE is required for origination and termination of SRv6 tunnels on services and they cannot share the same FPE. 

A single FPE can be configured for SRv6 origination. One or more FPEs can be configured for SRv6 termination, where a termination SRv6 FPE is assigned one or more configured locators. 

Transit SRv6 routers do not require SRv6 FPEs.

Optionsorigination, termination
Introduced 21.5.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

sub-mgmt-extension boolean
Synopsis Enable FPE for subscrber management extensions
Contextconfigure fwd-path-ext fpe number application sub-mgmt-extension boolean
Treesub-mgmt-extension

Description

When configured to true, the FPE is used for subscriber management extensions. The FPE can be used for multiple subscriber management applications, but it cannot be used for other applications.

When configured to false, the FPE is not used for subscriber management extensions. 

Defaultfalse
Introduced16.0.R1

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

multi-path
Synopsis Enable the multi-path context
Context configure fwd-path-ext fpe number multi-path
Treemulti-path

Description

Commands in this context configure a multipath FPE that can contain multiple PXC ports or LAGs of PXC ports.

Notes

The following elements are part of a choice: multi-path or path.

Introduced21.10.R1

Platforms

All

path [path-id] number
Synopsis Enter the path list instance
Context configure fwd-path-ext fpe number multi-path path number
Treepath

Description

Commands in this context configure a multipath FPE forwarding path. A single path in a multipath FPE can contain a single PXC port or a LAG of PXC ports.

Introduced21.10.R1

Platforms

All

[path-id] number
Synopsis Multipath FPE forwarding path ID
Context configure fwd-path-ext fpe number multi-path path number
Treepath
Range1 to 64

Notes

This element is part of a list key.

Introduced21.10.R1

Platforms

All

pxc reference
Synopsis Dedicated PXC ID used by the FPE path
Contextconfigure fwd-path-ext fpe number multi-path path number pxc reference
Treepxc

Reference

configure port-xc pxc number

Notes

The following elements are part of a choice: pxc or (xc-lag-a and xc-lag-b).

Introduced21.10.R1

Platforms

All

xc-lag-a reference
Synopsis PXC LAG identifier dedicated to the FPE path
Contextconfigure fwd-path-ext fpe number multi-path path number xc-lag-a reference
Treexc-lag-a

Description

This command specifies the LAG identifier associated with one side of the PXC. The operator can associate xc-lag-a with the LAG containing either subports.a or subports.b. The system does not enforce a match between xc-lag-a and the LAG ID containing subports.a.

Reference

configure lag lag-interface

Notes

The following elements are part of a choice: pxc or (xc-lag-a and xc-lag-b).

Introduced21.10.R1

Platforms

All

xc-lag-b reference
Synopsis PXC LAG identifier dedicated to the FPE path
Contextconfigure fwd-path-ext fpe number multi-path path number xc-lag-b reference
Treexc-lag-b

Description

This command specifies the LAG identifier associated with one side of the PXC. The operator can associate xc-lag-b with the LAG containing either subports.a or subports.b. The system does not enforce a match between xc-lag-b and the LAG ID containing subports.b.

Reference

configure lag lag-interface

Notes

The following elements are part of a choice: pxc or (xc-lag-a and xc-lag-b).

Introduced21.10.R1

Platforms

All

path
Synopsis Enter the path context
Context configure fwd-path-ext fpe number path
Treepath

Notes

The following elements are part of a choice: multi-path or path.

Introduced16.0.R1

Platforms

All

pxc reference
Synopsis Dedicated PXC ID used by the FPE path
Contextconfigure fwd-path-ext fpe number path pxc reference
Treepxc

Reference

configure port-xc pxc number

Notes

The following elements are part of a choice: pxc or (xc-lag-a and xc-lag-b).

Introduced16.0.R1

Platforms

All

xc-lag-a reference
Synopsis PXC LAG identifier dedicated to the FPE path
Contextconfigure fwd-path-ext fpe number path xc-lag-a reference
Treexc-lag-a

Description

This command specifies the LAG identifier associated with one side of the PXC. The operator can associate xc-lag-a with the LAG containing either subports.a or subports.b. The system does not enforce a match between xc-lag-a and the LAG ID containing subports.a.

Reference

configure lag lag-interface

Notes

The following elements are part of a choice: pxc or (xc-lag-a and xc-lag-b).

Introduced16.0.R4

Platforms

All

xc-lag-b reference
Synopsis PXC LAG identifier dedicated to the FPE path
Contextconfigure fwd-path-ext fpe number path xc-lag-b reference
Treexc-lag-b

Description

This command specifies the LAG identifier associated with one side of the PXC. The operator can associate xc-lag-b with the LAG containing either subports.a or subports.b. The system does not enforce a match between xc-lag-b and the LAG ID containing subports.b.

Reference

configure lag lag-interface

Notes

The following elements are part of a choice: pxc or (xc-lag-a and xc-lag-b).

Introduced16.0.R4

Platforms

All

sdp-id-range

Synopsis Enable the sdp-id-range context
Contextconfigure fwd-path-ext sdp-id-range
Treesdp-id-range

Description

Commands in this context configure the SDP ID range used by the FPE based PW port and VXLAN termination applications.

Each configured FPE-based PW port is associated with two internal SDPs (one in each direction) whose IDs are allocated from the configured SDP ID range. When the FPE is associated with VXLAN termination, an internal SDP is allocated from the configured SDP ID range and is used for R-VPLS services that terminate VXLAN IPv6. A spoke SDP per VXLAN IPv6 R-VPLS service is created on that SDP for egress processing of the packets. The SDP ID range cannot be modified if any of its IDs are currently in use.

Introduced16.0.R1

Platforms

All

end number
Synopsis Upper bound of the SDP ID range
Context configure fwd-path-ext sdp-id-range end number
Treeend
Range1 to 32767

Notes

This element is mandatory.

Introduced16.0.R1

Platforms

All

start number
Synopsis Lower bound of the SDP ID range
Context configure fwd-path-ext sdp-id-range start number
Treestart
Range1 to 32767

Notes

This element is mandatory.

Introduced16.0.R1

Platforms

All