qos commands
configure
— qos
— adv-config-policy named-item
— apply-groups reference
— apply-groups-exclude reference
— child-control
— bandwidth-distribution
— above-offered-allowance
— delta-consumed-agg-rate
— percent decimal-number
— delta-consumed-higher-tier-rate
— percent decimal-number
— unconsumed-agg-rate
— percent decimal-number
— unconsumed-higher-tier-rate
— percent decimal-number
— above-offered-cap
— percent decimal-number
— rate (number | keyword)
— enqueue-on-pir-zero boolean
— granularity
— percent decimal-number
— rate number
— internal-scheduler-weight-mode keyword
— limit-pir-zero-drain boolean
— lub-init-min-pir boolean
— offered-measurement
— add
— active-min-only boolean
— min-only boolean
— percent decimal-number
— rate number
— avg-frame-overhead-mode keyword
— fast-start boolean
— fast-stop boolean
— granularity
— percent decimal-number
— rate number
— hold-time
— active-min-only boolean
— high-rate number
— max-decrement
— percent decimal-number
— rate number
— sample-interval number
— time-average-factor
— dec-only boolean
— weighting-factor number
— description description
— apply-groups reference
— apply-groups-exclude reference
— fp-resource-policy fp-resource-policy-name
— aggregate-shapers
— auto-creation boolean
— hw-agg-shapers
— saps boolean
— subscribers boolean
— queue-sets
— default-size
— queue-groups (number | keyword)
— saps (number | keyword)
— subscribers (number | keyword)
— size number
— allocation-weight number
— apply-groups reference
— apply-groups-exclude reference
— reserved-non-shaper-queues number
— apply-groups reference
— apply-groups-exclude reference
— description description
— ports
— hqos-mode keyword
— queues
— ingress-percent-of-total decimal-number
— hs-attachment-policy named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— low-burst-max-class number
— queue number
— apply-groups reference
— apply-groups-exclude reference
— sched-class number
— unattached
— wrr-group number
— wrr-group number
— apply-groups reference
— apply-groups-exclude reference
— sched-class number
— unattached
— hs-pool-policy named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— mid-tier
— mid-pool number
— allocation-percent decimal-number
— apply-groups reference
— apply-groups-exclude reference
— parent-root-pool
— none
— pool-id reference
— port-bw-oversubscription-factor number
— slope-policy reference
— root-tier
— root-pool number
— allocation-weight number
— apply-groups reference
— apply-groups-exclude reference
— slope-policy reference
— system-reserve decimal-number
— hs-port-pool-policy named-item
— alt-port-class-pools
— class-pool number
— allocation
— explicit-percent decimal-number
— port-bw-weight number
— apply-groups reference
— apply-groups-exclude reference
— parent-mid-pool
— none
— pool-id number
— slope-policy reference
— apply-groups reference
— apply-groups-exclude reference
— description description
— std-port-class-pools
— class-pool number
— allocation
— explicit-percent decimal-number
— port-bw-weight number
— apply-groups reference
— apply-groups-exclude reference
— parent-mid-pool
— none
— pool-id number
— slope-policy reference
— hs-scheduler-policy named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— group number
— apply-groups reference
— apply-groups-exclude reference
— rate (number | keyword)
— max-rate (number | keyword)
— scheduling-class number
— apply-groups reference
— apply-groups-exclude reference
— group
— group-id number
— weight number
— rate (number | keyword)
— hw-agg-shaper-scheduler-policy named-item-64
— apply-groups reference
— apply-groups-exclude reference
— congestion-threshold number
— description description
— group named-item
— max-percent-rate decimal-number
— max-rate (number | keyword)
— monitor-threshold number
— sched-class number
— apply-groups reference
— apply-groups-exclude reference
— group reference
— weight number
— match-list
— ip-prefix-list named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— prefix ipv4-prefix
— ipv6-prefix-list named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— prefix ipv6-prefix
— port-list named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— port number
— range number end number
— md-auto-id
— qos-policy-id-range
— apply-groups reference
— apply-groups-exclude reference
— end number
— start number
— network network-policy-name
— apply-groups reference
— apply-groups-exclude reference
— description description
— egress
— dscp keyword
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— de-mark
— force number
— dot1p-in-profile number
— dot1p-out-profile number
— dscp-in-profile keyword
— dscp-out-profile keyword
— lsp-exp-in-profile number
— lsp-exp-out-profile number
— port-redirect-group
— policer number
— queue number
— ip-criteria
— entry number
— action
— fc keyword
— port-redirect-group
— policer number
— queue number
— profile keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description description
— match
— dscp keyword
— dst-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask ipv4-address
— dst-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— fragment keyword
— icmp-type number
— protocol (number | keyword)
— src-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask ipv4-address
— src-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— ipv6-criteria
— entry number
— action
— fc keyword
— port-redirect-group
— policer number
— queue number
— profile keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description description
— match
— dscp keyword
— dst-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask ipv6-address
— dst-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— fragment keyword
— icmp-type number
— next-header (number | keyword)
— src-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask ipv6-address
— src-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— prec number
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— remark-trusted
— force-egress-marking boolean
— ingress
— default-action
— fc keyword
— profile keyword
— dot1p number
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— dscp keyword
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— fp-redirect-group
— broadcast-policer number
— multicast-policer number
— policer number
— unknown-policer number
— ip-criteria
— entry number
— action
— fc keyword
— profile keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description description
— match
— dscp keyword
— dst-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask ipv4-address
— dst-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— fragment keyword
— protocol (number | keyword)
— src-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask ipv4-address
— src-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— ipv6-criteria
— entry number
— action
— fc keyword
— profile keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description description
— match
— dscp keyword
— dst-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask ipv6-address
— dst-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— fragment keyword
— next-header (number | keyword)
— src-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask ipv6-address
— src-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— ler-use-dscp boolean
— lsp-exp number
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— policy-id number
— scope keyword
— network-queue named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— multicast-queue reference
— queue reference
— hs-attachment-policy reference
— hs-wrr-group number
— adaptation-rule
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— rate number
— queue number
— adaptation-rule
— cir keyword
— fir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— avg-frame-overhead decimal-number
— cbs decimal-number
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— hs-alt-port-class-pool boolean
— hs-class-weight number
— hs-mbs decimal-number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— mbs decimal-number
— multipoint boolean
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— queue-type keyword
— rate
— cir number
— fir number
— pir number
— policer-control-policy named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— root
— max-percent-rate decimal-number
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— fixed-mbs boolean
— mbs-contribution (number | keyword)
— profile-preferred boolean
— tier number
— apply-groups reference
— apply-groups-exclude reference
— arbiter named-item
— apply-groups reference
— apply-groups-exclude reference
— arbiter-parent
— arbiter-name named-item
— level number
— weight number
— description description
— percent-rate decimal-number
— rate (number | keyword)
— reference-rate keyword
— port-scheduler-policy named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— dist-lag-rate-shared boolean
— group named-item
— apply-groups reference
— apply-groups-exclude reference
— monitor-threshold number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— hqos-algorithm keyword
— level number
— apply-groups reference
— apply-groups-exclude reference
— group reference
— monitor-threshold number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— weight number
— max-percent-rate decimal-number
— max-rate (number | keyword)
— monitor-threshold number
— orphan-overrides
— cir-level number
— cir-weight number
— level number
— weight number
— post-policer-mapping named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— fc keyword profile keyword
— apply-groups reference
— apply-groups-exclude reference
— maps-to
— fc keyword
— profile keyword
— queue-group-redirect-list named-item
— apply-groups reference
— apply-groups-exclude reference
— match number
— apply-groups reference
— apply-groups-exclude reference
— instance number
— type keyword
— queue-group-templates
— apply-groups reference
— apply-groups-exclude reference
— egress
— apply-groups reference
— apply-groups-exclude reference
— queue-group named-item
— apply-groups reference
— apply-groups-exclude reference
— description description-or-empty
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— queue
— none
— queue-id reference
— hs-attachment-policy reference
— hs-wrr-group number
— adaptation-rule
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— percent-rate decimal-number
— rate (number | keyword)
— policer number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— arbiter-parent
— arbiter-name named-item
— level number
— weight number
— cbs (number | keyword)
— description description
— exceed-pir boolean
— high-prio-only (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— reference-rate keyword
— profile-capped boolean
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— burst-limit (number | keyword)
— cbs (number | keyword)
— drop-tail
— exceed
— percent-reduction-from-mbs (number | keyword)
— high
— percent-reduction-from-mbs (number | keyword)
— highplus
— percent-reduction-from-mbs (number | keyword)
— low
— percent-reduction-from-mbs (number | keyword)
— dynamic-mbs boolean
— hs-alt-port-class-pool boolean
— hs-class-weight number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— reference-rate keyword
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— queue-delay number
— queue-type keyword
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name named-item
— weight number
— wred-queue
— mode keyword
— policy reference
— usage keyword
— queues-hqos-manageable boolean
— ingress
— apply-groups reference
— apply-groups-exclude reference
— queue-group named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— policer number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— arbiter-parent
— arbiter-name named-item
— level number
— weight number
— cbs (number | keyword)
— description description
— high-prio-only (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— profile-capped boolean
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue number
— adaptation-rule
— cir keyword
— fir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— burst-limit (number | keyword)
— cbs (number | keyword)
— cir-non-profiling boolean
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— multipoint boolean
— packet-byte-offset number
— percent-rate
— cir decimal-number
— fir decimal-number
— pir decimal-number
— police
— reference-rate keyword
— queue-mode keyword
— queue-type keyword
— rate
— cir (number | keyword)
— fir (number | keyword)
— pir (number | keyword)
— police
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name named-item
— weight number
— sap-egress qos-policy-name
— apply-groups reference
— apply-groups-exclude reference
— description description
— dot1p number
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— dscp keyword
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— ethernet-ctag boolean
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— de-mark
— force number
— de-mark-inner
— force number
— de-mark-outer
— force number
— dot1p
— exceed-profile number
— in-profile number
— out-profile number
— dot1p-inner
— exceed-profile number
— in-profile number
— out-profile number
— dot1p-outer
— exceed-profile number
— in-profile number
— out-profile number
— dscp
— exceed-profile keyword
— in-profile keyword
— out-profile keyword
— policer reference
— port-redirect-group-queue
— queue number
— prec
— exceed-profile number
— in-profile number
— out-profile number
— queue reference
— queue-group-queue
— instance number
— queue reference
— queue-group-name reference
— hs-attachment-policy reference
— hs-wrr-group number
— adaptation-rule
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— percent-rate decimal-number
— rate (number | keyword)
— hw-agg-shaper-queues
— queue-set-size (number | keyword)
— ip-criteria
— entry number
— action
— fc keyword
— policer reference
— port-redirect-group-queue boolean
— profile keyword
— queue number
— type keyword
— use-fc-mapped-queue boolean
— apply-groups reference
— apply-groups-exclude reference
— description description
— match
— dscp keyword
— dst-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask ipv4-address
— dst-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— fragment keyword
— protocol (number | keyword)
— src-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask ipv4-address
— src-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— ipv6-criteria
— entry number
— action
— fc keyword
— policer reference
— port-redirect-group-queue boolean
— profile keyword
— queue number
— type keyword
— use-fc-mapped-queue boolean
— apply-groups reference
— apply-groups-exclude reference
— description description
— match
— dscp keyword
— dst-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask ipv6-address
— dst-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— next-header (number | keyword)
— src-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask ipv6-address
— src-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— parent-location keyword
— policer number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— arbiter-parent
— arbiter-name named-item
— level number
— weight number
— cbs (number | keyword)
— description description
— dscp-prec-remarking boolean
— exceed-pir boolean
— high-prio-only (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— reference-rate keyword
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— profile-capped boolean
— profile-out-preserve boolean
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name named-item
— weight number
— stat-mode keyword
— policers-hqos-manageable boolean
— policy-id number
— post-policer-mapping reference
— prec number
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— queue number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— agg-shaper-weight number
— apply-groups reference
— apply-groups-exclude reference
— avg-frame-overhead decimal-number
— burst-limit (number | keyword)
— burst-limit-delay-time number
— cbs (number | keyword)
— cbs-delay-percent decimal-number
— cbs-delay-time number
— drop-tail
— exceed
— percent-reduction-from-mbs (number | keyword)
— high
— percent-reduction-from-mbs (number | keyword)
— highplus
— percent-reduction-from-mbs (number | keyword)
— low
— percent-reduction-from-mbs (number | keyword)
— fir-burst-limit (number | keyword)
— hs-alt-port-class-pool boolean
— hs-class-weight number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— maximum-data-transmission (number | keyword)
— mbs (number | keyword)
— mbs-delay-percent decimal-number
— mbs-delay-time number
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— reference-rate keyword
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— queue-type keyword
— rate
— cir (number | keyword)
— pir (number | keyword)
— sched-class (number | keyword)
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name named-item
— weight number
— wred-queue
— mode keyword
— policy reference
— usage keyword
— sched-class-elevation
— sched-class number
— apply-groups reference
— apply-groups-exclude reference
— weight number
— scope keyword
— subscriber-mgmt
— dynamic-policer
— arbiter-parent
— arbiter-name named-item
— level number
— weight number
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— policer-id-range
— end number
— start number
— stat-mode keyword
— dynamic-queue
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— queue-id-range
— end number
— start number
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name named-item
— weight number
— pcc-rule-entry
— range
— end number
— start number
— use-policer-result-marking-dot1p-inner boolean
— sap-ingress qos-policy-name
— apply-groups reference
— apply-groups-exclude reference
— default-fc sap-ingress-fc-name
— default-priority keyword
— description description
— dot1p number
— apply-groups reference
— apply-groups-exclude reference
— fc sap-ingress-fc-name
— priority keyword
— dscp keyword
— apply-groups reference
— apply-groups-exclude reference
— fc sap-ingress-fc-name
— priority keyword
— fc sap-ingress-fc-name
— apply-groups reference
— apply-groups-exclude reference
— broadcast-policer number
— broadcast-queue reference
— broadcast-queue-group-queue
— queue reference
— queue-group-name reference
— de-1-out-profile boolean
— egress-fc keyword
— fp-redirect-group-broadcast-policer
— fp-redirect-group-multicast-policer
— fp-redirect-group-policer
— fp-redirect-group-unknown-policer
— in-remark
— dscp keyword
— prec number
— multicast-policer number
— multicast-queue reference
— multicast-queue-group-queue
— queue reference
— queue-group-name reference
— out-remark
— dscp keyword
— prec number
— policer number
— profile keyword
— queue reference
— queue-group-queue
— queue reference
— queue-group-name reference
— unknown-policer number
— unknown-queue reference
— unknown-queue-group-queue
— queue reference
— queue-group-name reference
— ip-criteria
— entry number
— action
— fc sap-ingress-fc-name
— policer reference
— priority keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description description
— match
— dscp keyword
— dst-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask ipv4-address
— dst-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— fragment keyword
— protocol (number | keyword)
— src-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask ipv4-address
— src-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— vxlan-vni
— eq number
— range
— end number
— start number
— tag number
— type keyword
— ipv6-criteria
— entry number
— action
— fc sap-ingress-fc-name
— policer reference
— priority keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description description
— match
— dscp keyword
— dst-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask ipv6-address
— dst-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— fragment keyword
— next-header (number | keyword)
— src-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask ipv6-address
— src-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— vxlan-vni
— eq number
— range
— end number
— start number
— tag number
— type keyword
— lsp-exp number
— apply-groups reference
— apply-groups-exclude reference
— fc sap-ingress-fc-name
— priority keyword
— mac-criteria
— entry number
— action
— fc sap-ingress-fc-name
— policer reference
— priority keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description description
— match
— dot1p
— mask number
— priority number
— dst-mac
— address mac-address
— mask mac-address
— etype etype-value
— frame-type keyword
— inner-tag
— mask number
— vlan number
— llc-dsap
— dsap number
— mask number
— llc-ssap
— mask number
— ssap number
— outer-tag
— mask number
— vlan number
— snap-oui keyword
— snap-pid number
— src-mac
— address mac-address
— mask mac-address
— type keyword
— policer number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— arbiter-parent
— arbiter-name named-item
— level number
— weight number
— cbs (number | keyword)
— description description
— high-prio-only (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— reference-rate keyword
— profile-capped boolean
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name named-item
— weight number
— stat-mode keyword
— policers-hqos-manageable boolean
— policy-id number
— prec number
— apply-groups reference
— apply-groups-exclude reference
— fc sap-ingress-fc-name
— priority keyword
— queue number
— adaptation-rule
— cir keyword
— fir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— burst-limit (number | keyword)
— cbs (number | keyword)
— cir-non-profiling boolean
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— multipoint boolean
— packet-byte-offset number
— percent-rate
— cir decimal-number
— fir decimal-number
— pir decimal-number
— police
— reference-rate keyword
— queue-mode keyword
— queue-type keyword
— rate
— cir (number | keyword)
— fir (number | keyword)
— pir (number | keyword)
— police
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name named-item
— weight number
— scope keyword
— subscriber-mgmt
— dynamic-policer
— arbiter-parent
— arbiter-name named-item
— level number
— weight number
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— policer-id-range
— end number
— start number
— stat-mode keyword
— pcc-rule-entry
— range
— end number
— start number
— scheduler-policy named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— frame-based-accounting boolean
— tier number
— apply-groups reference
— apply-groups-exclude reference
— parent-location keyword
— scheduler named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— limit-unused-bandwidth boolean
— percent-rate
— cir (keyword | decimal-number)
— pir decimal-number
— reference-rate keyword
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name named-item
— weight number
— shared-queue named-item
— apply-groups reference
— apply-groups-exclude reference
— description description-or-empty
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— broadcast-queue number
— multicast-queue number
— queue number
— unknown-queue number
— queue number
— apply-groups reference
— apply-groups-exclude reference
— cbs number
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs number
— multipoint boolean
— queue-type keyword
— rate
— cir number
— fir number
— pir number
— slope-policy named-item
— apply-groups reference
— apply-groups-exclude reference
— description description
— exceed-slope
— admin-state keyword
— max-avg number
— max-prob number
— start-avg number
— high-slope
— admin-state keyword
— max-avg number
— max-prob number
— start-avg number
— highplus-slope
— admin-state keyword
— max-avg number
— max-prob number
— start-avg number
— low-slope
— admin-state keyword
— max-avg number
— max-prob number
— start-avg number
— time-average-factor number
qos command descriptions
qos
adv-config-policy [adv-config-policy-name] named-item
| Synopsis | Enter the adv-config-policy list instance | |
| Context | configure qos adv-config-policy named-item | |
| Tree | adv-config-policy | |
| Max. instances | 255 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[adv-config-policy-name] named-item
| Synopsis | Advanced QoS policy name | |
| Context | configure qos adv-config-policy named-item | |
| Tree | adv-config-policy | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
child-control
| Synopsis | Enter the child-control context | |
| Context | configure qos adv-config-policy named-item child-control | |
| Tree | child-control | |
| Introduced | 16.0.R1 | |
Platforms | All |
bandwidth-distribution
| Synopsis | Enter the bandwidth-distribution context | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution | |
| Tree | bandwidth-distribution | |
| Introduced | 16.0.R1 | |
Platforms | All |
above-offered-allowance
| Synopsis | Enter the above-offered-allowance context | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-allowance | |
| Tree | above-offered-allowance | |
Description | Commands in this context control the child’s above offered allowance bandwidth. The configuration is only applicable when the port scheduler is configured to use the above-offered-allowance-control algorithm (specified via the configure qos port-scheduler-policy hqos-algorithm command). | |
| Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
delta-consumed-agg-rate
| Synopsis | Enter the delta-consumed-agg-rate context | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-allowance delta-consumed-agg-rate | |
| Tree | delta-consumed-agg-rate | |
| Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
percent decimal-number
| Synopsis | Percentage of the delta consumed aggregate rate | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-allowance delta-consumed-agg-rate percent decimal-number | |
| Tree | percent | |
Description | This command configures the percentage of the delta (from the beginning to the end of the current H-QoS below CIR or above CIR pass) of the aggregate rate consumed by other members that can be given to a queue at the end of an H-QoS below CIR pass and above CIR pass. This command is only applicable when the port scheduler is configured to use the above-offered-allowance-control algorithm; otherwise it is ignored. | |
| Range | 0.00 to 100.00 | |
| Default | 20.00 | |
| Introduced | 19.10.R2 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
delta-consumed-higher-tier-rate
| Synopsis | Enter the delta-consumed-higher-tier-rate context | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-allowance delta-consumed-higher-tier-rate | |
| Tree | delta-consumed-higher-tier-rate | |
| Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
percent decimal-number
| Synopsis | Percentage of the delta consumed higher-tier rate | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-allowance delta-consumed-higher-tier-rate percent decimal-number | |
| Tree | percent | |
Description | This command configures the percentage of the delta (from the beginning to the end of the current H-QoS below CIR or above CIR pass) of the higher-tier rate consumed by its other members that can be given to a queue at the end of an H-QoS below CIR pass and above CIR pass. Higher tier refers to the Vport aggregate rate and port scheduler level, group, and maximum rates. This command is only applicable when the port scheduler is configured to use the above-offered-allowance-control algorithm; otherwise it is ignored. | |
| Range | 0.00 to 100.00 | |
| Default | 5.00 | |
| Introduced | 19.10.R2 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
unconsumed-agg-rate
| Synopsis | Enter the unconsumed-agg-rate context | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-allowance unconsumed-agg-rate | |
| Tree | unconsumed-agg-rate | |
| Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
percent decimal-number
| Synopsis | Percentage of the unconsumed aggregate rate | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-allowance unconsumed-agg-rate percent decimal-number | |
| Tree | percent | |
Description | This command configures the percentage of the unconsumed aggregate rate that can be given to a queue at the end of an H-QoS below CIR pass and above CIR pass. This command is only applicable when the port scheduler is configured to use the above-offered-allowance-control algorithm; otherwise it is ignored. | |
| Range | 0.00 to 100.00 | |
| Default | 100.00 | |
| Introduced | 19.10.R2 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
unconsumed-higher-tier-rate
| Synopsis | Enter the unconsumed-higher-tier-rate context | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-allowance unconsumed-higher-tier-rate | |
| Tree | unconsumed-higher-tier-rate | |
| Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
percent decimal-number
| Synopsis | Percentage of the unconsumed higher-tier rate | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-allowance unconsumed-higher-tier-rate percent decimal-number | |
| Tree | percent | |
Description | This command configures the percentage of the unconsumed higher tier rate that can be given to a queue at the end of an H-QoS below CIR pass and above CIR pass. Higher tier refers to the Vport aggregate rate and port scheduler level, group, and maximum rates. This command is only applicable when the port scheduler is configured to use the above-offered-allowance-control algorithm; otherwise it is ignored. | |
| Range | 0.00 to 100.00 | |
| Default | 100.00 | |
| Introduced | 19.10.R2 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
above-offered-cap
| Synopsis | Enter the above-offered-cap context | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-cap | |
| Tree | above-offered-cap | |
| Introduced | 16.0.R1 | |
Platforms | All |
percent decimal-number
| Synopsis | Percentage of PIR used as the fair share increase limit | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-cap percent decimal-number | |
| Tree | percent | |
| Range | 0.00 to 100.00 | |
Notes | The following elements are part of a choice: percent or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
rate (number | keyword)
| Synopsis | Explicit rate as the fair share increase limit | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution above-offered-cap rate (number | keyword) | |
| Tree | rate | |
| Range | 0 to 100000000 | |
| Options | ||
Notes | The following elements are part of a choice: percent or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
enqueue-on-pir-zero boolean
| Synopsis | Queue packets when bandwidth distribution set to zero | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution enqueue-on-pir-zero boolean | |
| Tree | enqueue-on-pir-zero | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
granularity
| Synopsis | Enter the granularity context | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution granularity | |
| Tree | granularity | |
| Introduced | 16.0.R1 | |
Platforms | All |
percent decimal-number
| Synopsis | Rounding percentage value for administrative PIR | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution granularity percent decimal-number | |
| Tree | percent | |
| Range | 0.00 to 100.00 | |
Notes | The following elements are part of a choice: percent or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
rate number
| Synopsis | Rounding rate step value | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution granularity rate number | |
| Tree | rate | |
| Range | 0 to 100000000 | |
Notes | The following elements are part of a choice: percent or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
internal-scheduler-weight-mode keyword
| Synopsis | Weight mode applied to this advanced QoS policy | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution internal-scheduler-weight-mode keyword | |
| Tree | internal-scheduler-weight-mode | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
limit-pir-zero-drain boolean
| Synopsis | Throttle draining when operational PIR set to zero | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution limit-pir-zero-drain boolean | |
| Tree | limit-pir-zero-drain | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
lub-init-min-pir boolean
| Synopsis | Apply minimal PIR for new queues when LUB is enabled | |
| Context | configure qos adv-config-policy named-item child-control bandwidth-distribution lub-init-min-pir boolean | |
| Tree | lub-init-min-pir | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
offered-measurement
| Synopsis | Enter the offered-measurement context | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement | |
| Tree | offered-measurement | |
| Introduced | 16.0.R1 | |
Platforms | All |
add
| Synopsis | Enter the add context | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement add | |
| Tree | add | |
| Introduced | 16.0.R1 | |
Platforms | All |
active-min-only boolean
| Synopsis | Use minimum offered rate for active queues or policers | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement add active-min-only boolean | |
| Tree | active-min-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
min-only boolean
| Synopsis | Use increase in operational PIR as minimum offered rate | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement add min-only boolean | |
| Tree | min-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
percent decimal-number
| Synopsis | Percentage of child PIR to add to offered rate | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement add percent decimal-number | |
| Tree | percent | |
| Range | 0.00 to 100.00 | |
Notes | The following elements are part of a choice: percent or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
rate number
| Synopsis | Rate value to add to child's offered rate | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement add rate number | |
| Tree | rate | |
| Range | 0 to 100000000 | |
Notes | The following elements are part of a choice: percent or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
avg-frame-overhead-mode keyword
| Synopsis | Method of average frame overhead calculation | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement avg-frame-overhead-mode keyword | |
| Tree | avg-frame-overhead-mode | |
Description | This command configures the calculation method for the average frame overhead. The average frame overhead represents the additional bytes associated with the physical medium (wire) and it facilitates more precise rate calculations based on the actual medium characteristics. This command is exclusively applicable to Ethernet ports. On Ethernet, the wire overhead typically amounts to 20 bytes. These 20 bytes are comprised of 7 bytes for the preamble, 1 byte for the Start of Frame Delimiter (SFD), and 12 bytes for the Inter-Packet Gap (IPG). When used in conjunction with the avg-frame-overhead command that is configured directly under a queue, this command allows you to enable, disable, or customize this overhead. To activate this command, you must apply the associated advanced configuration policy to a specific queue. auto - Automatically calculate average frame overhead. This setting impacts rate calculations on port schedulers (whether on a port or within a Vport) and aggregate rate limits for subscribers and Vports where rate calculations are based on wire rates. from-queue - Manually configure average frame overhead under the queue under the queue level using the avg-frame-overhead command where the overhead value is specified in percentages of an average frame size. The default value for the avg-frame-overhead command (overhead is 0), the rate calculations throughout the H-QoS hierarchy are based on Layer 2 packets (Layer 2 rates). | |
| Options | auto – Automatically calculate average frame overhead from-queue – Manually configure average frame overhead | |
| Default | auto | |
| Introduced | 24.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fast-start boolean
| Synopsis | Allow fast detection of initial bandwidth | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement fast-start boolean | |
| Tree | fast-start | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fast-stop boolean
| Synopsis | Allow fast detection of lack of offered rate | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement fast-stop boolean | |
| Tree | fast-stop | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
granularity
| Synopsis | Enter the granularity context | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement granularity | |
| Tree | granularity | |
| Introduced | 16.0.R1 | |
Platforms | All |
percent decimal-number
| Synopsis | Percentage of PIR used as threshold sensitivity to offered rate change | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement granularity percent decimal-number | |
| Tree | percent | |
| Range | 0.00 to 100.00 | |
Notes | The following elements are part of a choice: percent or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
rate number
| Synopsis | Rate as child's offered rate change sensitivity value | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement granularity rate number | |
| Tree | rate | |
| Range | 0 to 100000000 | |
Notes | The following elements are part of a choice: percent or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
hold-time
| Synopsis | Enter the hold-time context | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement hold-time | |
| Tree | hold-time | |
| Introduced | 16.0.R1 | |
Platforms | All |
active-min-only boolean
| Synopsis | Use minimum offered rate for active queues or policers | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement hold-time active-min-only boolean | |
| Tree | active-min-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
high-rate number
| Synopsis | Time to maintain current offered rate | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement hold-time high-rate number | |
| Tree | high-rate | |
| Range | 0 to 60 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
max-decrement
| Synopsis | Enter the max-decrement context | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement max-decrement | |
| Tree | max-decrement | |
| Introduced | 16.0.R1 | |
Platforms | All |
percent decimal-number
| Synopsis | percentage as decrement limit to offered rate change | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement max-decrement percent decimal-number | |
| Tree | percent | |
| Range | 0.00 to 100.00 | |
Notes | The following elements are part of a choice: percent or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
rate number
| Synopsis | Value to use as decrement limit to offered rate change | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement max-decrement rate number | |
| Tree | rate | |
| Range | 0 to 100000000 | |
Notes | The following elements are part of a choice: percent or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
sample-interval number
| Synopsis | Interval for sampling the child's offered rate | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement sample-interval number | |
| Tree | sample-interval | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
time-average-factor
| Synopsis | Enter the time-average-factor context | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement time-average-factor | |
| Tree | time-average-factor | |
| Introduced | 16.0.R1 | |
Platforms | All |
dec-only boolean
| Synopsis | Apply time adjustment when the offered rate decreases | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement time-average-factor dec-only boolean | |
| Tree | dec-only | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weighting-factor number
| Synopsis | New offered rate with a sample of the previous offered rate | |
| Context | configure qos adv-config-policy named-item child-control offered-measurement time-average-factor weighting-factor number | |
| Tree | weighting-factor | |
| Range | 0 to 64 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
description description
| Synopsis | Text description | |
| Context | configure qos adv-config-policy named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
fp-resource-policy [fp-resource-policy-name] fp-resource-policy-name
| Synopsis | Enter the fp-resource-policy list instance | |
| Context | configure qos fp-resource-policy fp-resource-policy-name | |
| Tree | fp-resource-policy | |
| Max. instances | 15 | |
| Introduced | 20.2.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
[fp-resource-policy-name] fp-resource-policy-name
| Synopsis | FP resource policy name | |
| Context | configure qos fp-resource-policy fp-resource-policy-name | |
| Tree | fp-resource-policy | |
| String length | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
aggregate-shapers
| Synopsis | Enter the aggregate-shapers context | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers | |
| Tree | aggregate-shapers | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
auto-creation boolean
|
WARNING: Modifying this element resets the associated cards/XIOMs/MDAs for the new value to take effect. On the 7750 SR-1, the configuration must be saved and the router must be rebooted for the new value to take effect. | ||
| Synopsis | Enables auto-creation of hardware aggregate shapers | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers auto-creation boolean | |
| Tree | auto-creation | |
Description | When configured to true, enables the auto-creation of hardware aggregate shapers on the specified FP. After enabling, the corresponding FP is rebooted. | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s | |
hw-agg-shapers
| Synopsis | Enter the hw-agg-shapers context | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers hw-agg-shapers | |
| Tree | hw-agg-shapers | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
saps boolean
|
WARNING: Modifying this element resets the associated cards/XIOMs/MDAs for the new value to take effect. On the 7750 SR-1, the configuration must be saved and the router must be rebooted for the new value to take effect. | ||
| Synopsis | Enable hardware aggregate shapers for SAPs | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers hw-agg-shapers saps boolean | |
| Tree | saps | |
| Default | false | |
| Introduced | 22.10.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s | |
subscribers boolean
|
WARNING: Modifying this element resets the associated cards/XIOMs/MDAs for the new value to take effect. On the 7750 SR-1, the configuration must be saved and the router must be rebooted for the new value to take effect. | ||
| Synopsis | Enable hardware aggregate shapers for subscribers | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers hw-agg-shapers subscribers boolean | |
| Tree | subscribers | |
| Default | false | |
| Introduced | 21.7.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s | |
queue-sets
| Synopsis | Enter the queue-sets context | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers queue-sets | |
| Tree | queue-sets | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
default-size
| Synopsis | Enter the default-size context | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers queue-sets default-size | |
| Tree | default-size | |
Description | Commands in this context configure the default queue-set size for individual object types. | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
queue-groups (number | keyword)
| Synopsis | Default size of queue-groups | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers queue-sets default-size queue-groups (number | keyword) | |
| Tree | queue-groups | |
| Range | 2 to 8 | |
| Options | ||
| Default | 8 | |
| Introduced | 22.10.R1 | |
Platforms |
7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
saps (number | keyword)
| Synopsis | Default queue-set size for SAPs | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers queue-sets default-size saps (number | keyword) | |
| Tree | saps | |
Description | This command configures the default queue-set size for SAPs. When the non-shaper-queues keyword is configured, SAPs do not use hardware aggregate shapers on FPs where the specified FP resource policy is applied. | |
| Range | 2 to 8 | |
| Options | ||
| Default | 8 | |
| Introduced | 22.10.R1 | |
Platforms |
7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
subscribers (number | keyword)
| Synopsis | Default queue-set size for subscribers | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers queue-sets default-size subscribers (number | keyword) | |
| Tree | subscribers | |
Description | This command configures the default queue-set size for subscribers. When the non-shaper-queues keyword is configured, SAPs do not use hardware aggregate shapers on FPs where the specified FP resource policy is applied. | |
| Range | 2 to 8 | |
| Options | ||
| Default | 8 | |
| Introduced | 22.10.R1 | |
Platforms |
7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
size [qset-size] number
| Synopsis | Enter the size list instance | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers queue-sets size number | |
| Tree | size | |
Description | Commands in this context configure parameters for the specified queue-set size. | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
[qset-size] number
| Synopsis | Size of the queue-sets | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers queue-sets size number | |
| Tree | size | |
| Range | 2 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
allocation-weight number
| Synopsis | Allocation weight of the queue-set size | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers queue-sets size number allocation-weight number | |
| Tree | allocation-weight | |
Description | This command configures the allocation weight for the specified queue-set size. The available queue-sets are distributed based on the allocation weight among different queue-set sizes. | |
| Range | 0 to 100 | |
| Introduced | 22.10.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
reserved-non-shaper-queues number
| Synopsis | Number of queues reserved for non-shaper queues | |
| Context | configure qos fp-resource-policy fp-resource-policy-name aggregate-shapers reserved-non-shaper-queues number | |
| Tree | reserved-non-shaper-queues | |
Description | This command configures the number of egress queues that will not be used by hardware aggregate shapers. | |
| Range | 2048 to 262144 | |
| Default | 8192 | |
| Introduced | 22.10.R1 | |
Platforms |
7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
description description
| Synopsis | Text description | |
| Context | configure qos fp-resource-policy fp-resource-policy-name description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
ports
| Synopsis | Enter the ports context | |
| Context | configure qos fp-resource-policy fp-resource-policy-name ports | |
| Tree | ports | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
hqos-mode keyword
|
WARNING: Modifying this element resets the associated cards/XIOMs/MDAs for the new value to take effect. On the 7750 SR-1, the configuration must be saved and the router must be rebooted for the new value to take effect. | ||
| Synopsis | Default HQOS mode of the port | |
| Context | configure qos fp-resource-policy fp-resource-policy-name ports hqos-mode keyword | |
| Tree | hqos-mode | |
| Options | ||
| Default | port-scheduler | |
| Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s | |
queues
| Synopsis | Enter the queues context | |
| Context | configure qos fp-resource-policy fp-resource-policy-name queues | |
| Tree | queues | |
| Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
ingress-percent-of-total decimal-number
|
WARNING: Modifying this element resets the associated cards/XIOMs/MDAs for the new value to take effect. On the 7750 SR-1, the configuration must be saved and the router must be rebooted for the new value to take effect. | ||
| Synopsis | Percentage of total ingress queues allocated | |
| Context | configure qos fp-resource-policy fp-resource-policy-name queues ingress-percent-of-total decimal-number | |
| Tree | ingress-percent-of-total | |
Description | This command configures the percentage of the total number of queues on the FP on which the policy is applied that are allocated to ingress, with the remainder allocated to egress. The ingress and egress buffer pool sizes are not affected by the queue allocation. The allocation is performed in sets of 8192 queues, with a minimum of 8192 queues at ingress and 8192 queues at egress. If the percentage configured results in the queue allocation not being a multiple of 8192, the number of queues at ingress is rounded down to the next 8192 boundary, and consequently the number of queues at egress is rounded up to the next 8192 boundary, both while respecting the minimum at ingress and egress. If the FP resource policy is applied to any FP and the updated allocation is not achievable with the current ingress or egress queue consumption on any of the related FPs, the command fails. The configuration of this command (which includes removing the configuration) causes the router to immediately reset the associated cards, XIOMs and MDAs on all FPs on which the FP resource policy is applied, except on the 7750 SR-1, where the configuration must be saved and the router rebooted, immediately after committing the configuration transaction. | |
| Range | 4.00 to 97.00 | |
| Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS | |
hs-attachment-policy [name] named-item
| Synopsis | Enter the hs-attachment-policy list instance | |
| Context | configure qos hs-attachment-policy named-item | |
| Tree | hs-attachment-policy | |
| Max. instances | 31 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR-7/12/12e |
[name] named-item
| Synopsis | HS attachment policy name | |
| Context | configure qos hs-attachment-policy named-item | |
| Tree | hs-attachment-policy | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
description description
| Synopsis | Text description | |
| Context | configure qos hs-attachment-policy named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
low-burst-max-class number
| Synopsis | Low priority burst threshold | |
| Context | configure qos hs-attachment-policy named-item low-burst-max-class number | |
| Tree | low-burst-max-class | |
| Range | 1 to 6 | |
| Default | 6 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
queue [queue-id] number
| Synopsis | Enter the queue list instance | |
| Context | configure qos hs-attachment-policy named-item queue number | |
| Tree | queue | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[queue-id] number
| Synopsis | Queue identifier for the HS attachment policy | |
| Context | configure qos hs-attachment-policy named-item queue number | |
| Tree | queue | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
sched-class number
| Synopsis | Scheduling class associated with the queue | |
| Context | configure qos hs-attachment-policy named-item queue number sched-class number | |
| Tree | sched-class | |
| Range | 1 to 6 | |
Notes | The following elements are part of a choice: sched-class, unattached, or wrr-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
unattached
| Synopsis | Do not attach queue to scheduling class or WRR group | |
| Context | configure qos hs-attachment-policy named-item queue number unattached | |
| Tree | unattached | |
Notes | The following elements are part of a choice: sched-class, unattached, or wrr-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
wrr-group number
| Synopsis | WRR group attached to the queue | |
| Context | configure qos hs-attachment-policy named-item queue number wrr-group number | |
| Tree | wrr-group | |
| Range | 1 to 2 | |
Notes | The following elements are part of a choice: sched-class, unattached, or wrr-group. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
wrr-group [wrr-group-id] number
| Synopsis | Enter the wrr-group list instance | |
| Context | configure qos hs-attachment-policy named-item wrr-group number | |
| Tree | wrr-group | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[wrr-group-id] number
| Synopsis | WRR group ID for the HS attachment policy | |
| Context | configure qos hs-attachment-policy named-item wrr-group number | |
| Tree | wrr-group | |
| Range | 1 to 2 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
sched-class number
| Synopsis | Scheduling class associated with the WRR group | |
| Context | configure qos hs-attachment-policy named-item wrr-group number sched-class number | |
| Tree | sched-class | |
| Range | 1 to 6 | |
Notes | The following elements are part of a choice: sched-class or unattached. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
unattached
| Synopsis | Do not attach group ID to scheduling class or WRR group | |
| Context | configure qos hs-attachment-policy named-item wrr-group number unattached | |
| Tree | unattached | |
Notes | The following elements are part of a choice: sched-class or unattached. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-pool-policy [name] named-item
| Synopsis | Enter the hs-pool-policy list instance | |
| Context | configure qos hs-pool-policy named-item | |
| Tree | hs-pool-policy | |
| Max. instances | 63 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR-7/12/12e |
[name] named-item
| Synopsis | HS pool policy name | |
| Context | configure qos hs-pool-policy named-item | |
| Tree | hs-pool-policy | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
description description
| Synopsis | Text description | |
| Context | configure qos hs-pool-policy named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
mid-tier
| Synopsis | Enter the mid-tier context | |
| Context | configure qos hs-pool-policy named-item mid-tier | |
| Tree | mid-tier | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
mid-pool [mid-pool-id] number
| Synopsis | Enter the mid-pool list instance | |
| Context | configure qos hs-pool-policy named-item mid-tier mid-pool number | |
| Tree | mid-pool | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[mid-pool-id] number
| Synopsis | Mid-pool identifier for the HS pool policy | |
| Context | configure qos hs-pool-policy named-item mid-tier mid-pool number | |
| Tree | mid-pool | |
| Range | 1 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
allocation-percent decimal-number
| Synopsis | Root pool size to derive the mid-pool size | |
| Context | configure qos hs-pool-policy named-item mid-tier mid-pool number allocation-percent decimal-number | |
| Tree | allocation-percent | |
| Range | 0.01 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
parent-root-pool
| Synopsis | Enter the parent-root-pool context | |
| Context | configure qos hs-pool-policy named-item mid-tier mid-pool number parent-root-pool | |
| Tree | parent-root-pool | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
none
| Synopsis | Assign no buffers to the mid-tier pool | |
| Context | configure qos hs-pool-policy named-item mid-tier mid-pool number parent-root-pool none | |
| Tree | none | |
Notes | The following elements are part of a choice: none or pool-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pool-id reference
| Synopsis | Parent root pool to which the mid-pool is associated | |
| Context | configure qos hs-pool-policy named-item mid-tier mid-pool number parent-root-pool pool-id reference | |
| Tree | pool-id | |
Reference | configure qos hs-pool-policy named-item root-tier root-pool number | |
Notes | The following elements are part of a choice: none or pool-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
port-bw-oversubscription-factor number
| Synopsis | Over subscription factor for port-class pool sizes | |
| Context | configure qos hs-pool-policy named-item mid-tier mid-pool number port-bw-oversubscription-factor number | |
| Tree | port-bw-oversubscription-factor | |
Description | This command modifies the size of the mid-pool when calculating the port-class pool sizes based on port bandwidth ratios. The over subscription factor for a mid-pool can be modified at any time, causing the corresponding port-class pool dynamic sizes to be recalculated. A similar behavior can be obtained by increasing the mid-pool's allocation-percent of its parent root-pool. However, the major difference in using this command is that it provides larger port-class pools without allowing the mid-pool to use a higher number of buffers in the root pool. | |
| Range | 1 to 10 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
slope-policy reference
| Synopsis | Slope policy to define high, low, and exceed slopes | |
| Context | configure qos hs-pool-policy named-item mid-tier mid-pool number slope-policy reference | |
| Tree | slope-policy | |
Reference | configure qos slope-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
root-tier
| Synopsis | Enter the root-tier context | |
| Context | configure qos hs-pool-policy named-item root-tier | |
| Tree | root-tier | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
root-pool [root-pool-id] number
| Synopsis | Enter the root-pool list instance | |
| Context | configure qos hs-pool-policy named-item root-tier root-pool number | |
| Tree | root-pool | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[root-pool-id] number
| Synopsis | Root pool identifier for the HS pool policy | |
| Context | configure qos hs-pool-policy named-item root-tier root-pool number | |
| Tree | root-pool | |
| Range | 1 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
allocation-weight number
| Synopsis | Root pool allocation weight used to calculate pool size | |
| Context | configure qos hs-pool-policy named-item root-tier root-pool number allocation-weight number | |
| Tree | allocation-weight | |
Description | This command specifies the weight that is applied to the root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor. The amount of buffers remaining after the system-reserve percentage is applied is multiplied by the buffer allocation factor to derive the pool size. A root pool with an allocation weight set to “0” is considered inactive and is not allocated buffers. When a root pool’s allocation weight is modified, all root pools, mid-tier pools, and port class pool sizes are reevaluated and modified when necessary. | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR-7/12/12e |
slope-policy reference
| Synopsis | Slope policy to define high, low, and exceed slopes | |
| Context | configure qos hs-pool-policy named-item root-tier root-pool number slope-policy reference | |
| Tree | slope-policy | |
Reference | configure qos slope-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
system-reserve decimal-number
| Synopsis | Percentage of buffers reserved for internal system use | |
| Context | configure qos hs-pool-policy named-item system-reserve decimal-number | |
| Tree | system-reserve | |
| Range | 1.00 to 30.00 | |
| Default | 5.00 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
hs-port-pool-policy [name] named-item
| Synopsis | Enter the hs-port-pool-policy list instance | |
| Context | configure qos hs-port-pool-policy named-item | |
| Tree | hs-port-pool-policy | |
| Max. instances | 2047 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[name] named-item
| Synopsis | HS port pool policy name | |
| Context | configure qos hs-port-pool-policy named-item | |
| Tree | hs-port-pool-policy | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
alt-port-class-pools
| Synopsis | Enter the alt-port-class-pools context | |
| Context | configure qos hs-port-pool-policy named-item alt-port-class-pools | |
| Tree | alt-port-class-pools | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
class-pool [alt-class-pool-id] number
| Synopsis | Enter the class-pool list instance | |
| Context | configure qos hs-port-pool-policy named-item alt-port-class-pools class-pool number | |
| Tree | class-pool | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[alt-class-pool-id] number
| Synopsis | Class pool ID | |
| Context | configure qos hs-port-pool-policy named-item alt-port-class-pools class-pool number | |
| Tree | class-pool | |
| Range | 1 to 6 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
allocation
| Synopsis | Enter the allocation context | |
| Context | configure qos hs-port-pool-policy named-item alt-port-class-pools class-pool number allocation | |
| Tree | allocation | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
explicit-percent decimal-number
| Synopsis | Percentage of parent pool to be allocated | |
| Context | configure qos hs-port-pool-policy named-item alt-port-class-pools class-pool number allocation explicit-percent decimal-number | |
| Tree | explicit-percent | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: explicit-percent or port-bw-weight. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
port-bw-weight number
| Synopsis | Port bandwidth weight to be allocated | |
| Context | configure qos hs-port-pool-policy named-item alt-port-class-pools class-pool number allocation port-bw-weight number | |
| Tree | port-bw-weight | |
| Range | 1 to 100 | |
| Default | 1 | |
Notes |
The following elements are part of a choice: explicit-percent or port-bw-weight. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
parent-mid-pool
| Synopsis | Enter the parent-mid-pool context | |
| Context | configure qos hs-port-pool-policy named-item alt-port-class-pools class-pool number parent-mid-pool | |
| Tree | parent-mid-pool | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
none
| Synopsis | Deactivate the port-class pool; pool size is zero | |
| Context | configure qos hs-port-pool-policy named-item alt-port-class-pools class-pool number parent-mid-pool none | |
| Tree | none | |
Notes | The following elements are part of a choice: none or pool-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pool-id number
| Synopsis | Mid-pool ID associated with the port-class pool | |
| Context | configure qos hs-port-pool-policy named-item alt-port-class-pools class-pool number parent-mid-pool pool-id number | |
| Tree | pool-id | |
| Range | 1 to 16 | |
Notes | The following elements are part of a choice: none or pool-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
slope-policy reference
| Synopsis | Slope policy to define high, low, and exceed slopes | |
| Context | configure qos hs-port-pool-policy named-item alt-port-class-pools class-pool number slope-policy reference | |
| Tree | slope-policy | |
Reference | configure qos slope-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
description description
| Synopsis | Text description | |
| Context | configure qos hs-port-pool-policy named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
std-port-class-pools
| Synopsis | Enter the std-port-class-pools context | |
| Context | configure qos hs-port-pool-policy named-item std-port-class-pools | |
| Tree | std-port-class-pools | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
class-pool [std-class-pool-id] number
| Synopsis | Enter the class-pool list instance | |
| Context | configure qos hs-port-pool-policy named-item std-port-class-pools class-pool number | |
| Tree | class-pool | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[std-class-pool-id] number
| Synopsis | Class pool ID | |
| Context | configure qos hs-port-pool-policy named-item std-port-class-pools class-pool number | |
| Tree | class-pool | |
| Range | 1 to 6 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
allocation
| Synopsis | Enter the allocation context | |
| Context | configure qos hs-port-pool-policy named-item std-port-class-pools class-pool number allocation | |
| Tree | allocation | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
explicit-percent decimal-number
| Synopsis | Percentage of parent pool to be allocated | |
| Context | configure qos hs-port-pool-policy named-item std-port-class-pools class-pool number allocation explicit-percent decimal-number | |
| Tree | explicit-percent | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: explicit-percent or port-bw-weight. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
port-bw-weight number
| Synopsis | Port bandwidth weight to be allocated | |
| Context | configure qos hs-port-pool-policy named-item std-port-class-pools class-pool number allocation port-bw-weight number | |
| Tree | port-bw-weight | |
| Range | 1 to 100 | |
| Default | 1 | |
Notes |
The following elements are part of a choice: explicit-percent or port-bw-weight. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
parent-mid-pool
| Synopsis | Enter the parent-mid-pool context | |
| Context | configure qos hs-port-pool-policy named-item std-port-class-pools class-pool number parent-mid-pool | |
| Tree | parent-mid-pool | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
none
| Synopsis | Deactivate the port-class pool; pool size is zero | |
| Context | configure qos hs-port-pool-policy named-item std-port-class-pools class-pool number parent-mid-pool none | |
| Tree | none | |
Notes | The following elements are part of a choice: none or pool-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pool-id number
| Synopsis | Mid-pool ID associated with the port-class pool | |
| Context | configure qos hs-port-pool-policy named-item std-port-class-pools class-pool number parent-mid-pool pool-id number | |
| Tree | pool-id | |
| Range | 1 to 16 | |
Notes | The following elements are part of a choice: none or pool-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
slope-policy reference
| Synopsis | Slope policy to define high, low, and exceed slopes | |
| Context | configure qos hs-port-pool-policy named-item std-port-class-pools class-pool number slope-policy reference | |
| Tree | slope-policy | |
Reference | configure qos slope-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-scheduler-policy [name] named-item
| Synopsis | Enter the hs-scheduler-policy list instance | |
| Context | configure qos hs-scheduler-policy named-item | |
| Tree | hs-scheduler-policy | |
| Max. instances | 127 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[name] named-item
| Synopsis | HS scheduler policy name | |
| Context | configure qos hs-scheduler-policy named-item | |
| Tree | hs-scheduler-policy | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
description description
| Synopsis | Text description | |
| Context | configure qos hs-scheduler-policy named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
group [group-id] number
| Synopsis | Enter the group list instance | |
| Context | configure qos hs-scheduler-policy named-item group number | |
| Tree | group | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] number
| Synopsis | Group ID for the HS scheduler policy | |
| Context | configure qos hs-scheduler-policy named-item group number | |
| Tree | group | |
| Range | 1 | |
|
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
| Synopsis | Group maximum rate | |
| Context | configure qos hs-scheduler-policy named-item group number rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 100000 | |
| Units | megabps | |
| Options | ||
| Default | max | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
max-rate (number | keyword)
| Synopsis | Maximum frame-based bandwidth limit for the policy | |
| Context | configure qos hs-scheduler-policy named-item max-rate (number | keyword) | |
| Tree | max-rate | |
| Range | 1 to 100000 | |
| Options | ||
| Default | max | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR-7/12/12e |
scheduling-class [class-id] number
| Synopsis | Enter the scheduling-class list instance | |
| Context | configure qos hs-scheduler-policy named-item scheduling-class number | |
| Tree | scheduling-class | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[class-id] number
| Synopsis | Scheduling class for the HS scheduler policy | |
| Context | configure qos hs-scheduler-policy named-item scheduling-class number | |
| Tree | scheduling-class | |
| Range | 1 to 6 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
group
| Synopsis | Enable the group context | |
| Context | configure qos hs-scheduler-policy named-item scheduling-class number group | |
| Tree | group | |
Notes | The following elements are part of a choice: group or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
group-id number
| Synopsis | Associated group associated with this scheduling class | |
| Context | configure qos hs-scheduler-policy named-item scheduling-class number group group-id number | |
| Tree | group-id | |
| Range | 1 | |
|
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
weight number
| Synopsis | Weight associated with this scheduling class | |
| Context | configure qos hs-scheduler-policy named-item scheduling-class number group weight number | |
| Tree | weight | |
| Range | 1 to 127 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
rate (number | keyword)
| Synopsis | Maximum frame-based bandwidth limit | |
| Context | configure qos hs-scheduler-policy named-item scheduling-class number rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 100000 | |
| Units | kilobps | |
| Options | ||
| Default | max | |
Notes |
The following elements are part of a choice: group or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hw-agg-shaper-scheduler-policy [name] named-item-64
| Synopsis | Enter the hw-agg-shaper-scheduler-policy list instance | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 | |
| Tree | hw-agg-shaper-scheduler-policy | |
Description | Commands in this context configure the attributes of a hardware aggregate shaper scheduler policy. | |
| Max. instances | 127 | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
[name] named-item-64
| Synopsis | Name of the hardware aggregate shaper scheduler policy | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 | |
| Tree | hw-agg-shaper-scheduler-policy | |
| String length | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
congestion-threshold number
| Synopsis | Congestion threshold of the scheduler | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 congestion-threshold number | |
| Tree | congestion-threshold | |
Description | This command configures the congestion threshold for the hardware aggregate shaper scheduler policy, which, if exceeded, triggers the hardware aggregate scheduler algorithm. The value is expressed as a percentage of the scheduler rate. | |
| Range | 0 to 100 | |
| Default | 90 | |
| Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
description description
| Synopsis | Text description | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
group [group-name] named-item
| Synopsis | Add a list entry for group | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 group named-item | |
| Tree | group | |
| Max. instances | 6 | |
| Introduced | 21.7.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
[group-name] named-item
| Synopsis | Name of the HW aggregate shaper scheduler policy group | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 group named-item | |
| Tree | group | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
max-percent-rate decimal-number
| Synopsis | Maximum frame-based bandwidth percentage | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 max-percent-rate decimal-number | |
| Tree | max-percent-rate | |
Description | This command configures the rate of the hardware aggregate shaper scheduler expressed as a percentage of the port rate. | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: max-percent-rate or max-rate. | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
max-rate (number | keyword)
| Synopsis | Maximum frame-based bandwidth limit | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 max-rate (number | keyword) | |
| Tree | max-rate | |
| Range | 1 to 6400000000 | |
| Units | kilobps | |
| Options | ||
| Default | max | |
Notes |
The following elements are part of a choice: max-percent-rate or max-rate. | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
monitor-threshold number
| Synopsis | Monitor threshold for the scheduler | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 monitor-threshold number | |
| Tree | monitor-threshold | |
Description | This command configures the monitor threshold for the hardware aggregate shaper scheduler policy, which is used for egress scheduler monitoring. The value is expressed as a percentage of the scheduler rate, which is considered as a limit for determining congestion. | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
sched-class [class-id] number
| Synopsis | Enter the sched-class list instance | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 sched-class number | |
| Tree | sched-class | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
[class-id] number
| Synopsis | Scheduling class ID for the scheduler policy | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 sched-class number | |
| Tree | sched-class | |
| Range | 1 to 6 | |
Notes | This element is part of a list key. | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
group reference
| Synopsis | Group associated with the scheduling class | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 sched-class number group reference | |
| Tree | group | |
Description | This command assigns the specified scheduling class to a group within a hardware aggregate shaper scheduler policy. | |
Reference | configure qos hw-agg-shaper-scheduler-policy named-item-64 group named-item | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
weight number
| Synopsis | Weight associated with the scheduling class | |
| Context | configure qos hw-agg-shaper-scheduler-policy named-item-64 sched-class number weight number | |
| Tree | weight | |
Description | This command configures the weight for a scheduling class within the specified group. | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
match-list
| Synopsis | Enter the match-list context | |
| Context | configure qos match-list | |
| Tree | match-list | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list [prefix-list-name] named-item
| Synopsis | Enter the ip-prefix-list list instance | |
| Context | configure qos match-list ip-prefix-list named-item | |
| Tree | ip-prefix-list | |
| Max. instances | 512 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[prefix-list-name] named-item
| Synopsis | IP prefix list name | |
| Context | configure qos match-list ip-prefix-list named-item | |
| Tree | ip-prefix-list | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R3 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos match-list ip-prefix-list named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
prefix [ip-prefix] ipv4-prefix
| Synopsis | Add a list entry for prefix | |
| Context | configure qos match-list ip-prefix-list named-item prefix ipv4-prefix | |
| Tree | prefix | |
| Max. instances | 256 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix] ipv4-prefix
| Synopsis | IPv4 address prefix | |
| Context | configure qos match-list ip-prefix-list named-item prefix ipv4-prefix | |
| Tree | prefix | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R3 | |
Platforms | All |
ipv6-prefix-list [prefix-list-name] named-item
| Synopsis | Enter the ipv6-prefix-list list instance | |
| Context | configure qos match-list ipv6-prefix-list named-item | |
| Tree | ipv6-prefix-list | |
| Max. instances | 128 | |
| Introduced | 16.0.R4 | |
Platforms | All |
[prefix-list-name] named-item
| Synopsis | IP prefix list name | |
| Context | configure qos match-list ipv6-prefix-list named-item | |
| Tree | ipv6-prefix-list | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos match-list ipv6-prefix-list named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R4 | |
Platforms | All |
prefix [ipv6-prefix] ipv6-prefix
| Synopsis | Add a list entry for prefix | |
| Context | configure qos match-list ipv6-prefix-list named-item prefix ipv6-prefix | |
| Tree | prefix | |
| Max. instances | 128 | |
| Introduced | 16.0.R4 | |
Platforms | All |
[ipv6-prefix] ipv6-prefix
| Synopsis | Ipv6 address prefix | |
| Context | configure qos match-list ipv6-prefix-list named-item prefix ipv6-prefix | |
| Tree | prefix | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R4 | |
Platforms | All |
port-list [port-list-name] named-item
| Synopsis | Enter the port-list list instance | |
| Context | configure qos match-list port-list named-item | |
| Tree | port-list | |
| Max. instances | 16 | |
| Introduced | 20.10.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
[port-list-name] named-item
| Synopsis | Port list name | |
| Context | configure qos match-list port-list named-item | |
| Tree | port-list | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description description
| Synopsis | Text description | |
| Context | configure qos match-list port-list named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
port [value] number
| Synopsis | Add a list entry for port | |
| Context | configure qos match-list port-list named-item port number | |
| Tree | port | |
Description | Commands in this context specify ports for a port match list. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
[value] number
| Synopsis | Port number | |
| Context | configure qos match-list port-list named-item port number | |
| Tree | port | |
| Range | 0 to 65535 | |
Notes | This element is part of a list key. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range [start] number end number
[start] number
end number
md-auto-id
| Synopsis | Enter the md-auto-id context | |
| Context | configure qos md-auto-id | |
| Tree | md-auto-id | |
| Introduced | 16.0.R1 | |
Platforms | All |
qos-policy-id-range
| Synopsis | Enable the qos-policy-id-range context | |
| Context | configure qos md-auto-id qos-policy-id-range | |
| Tree | qos-policy-id-range | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Upper bound of the ID range | |
| Context | configure qos md-auto-id qos-policy-id-range end number | |
| Tree | end | |
| Range | 2 to 65535 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
start number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Lower bound of the ID range | |
| Context | configure qos md-auto-id qos-policy-id-range start number | |
| Tree | start | |
| Range | 2 to 65535 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All | |
network [network-policy-name] network-policy-name
[network-policy-name] network-policy-name
description description
| Synopsis | Text description | |
| Context | configure qos network network-policy-name description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
dscp [dscp-name] keyword
[dscp-name] keyword
fc keyword
profile keyword
fc [fc-name] keyword
[fc-name] keyword
de-mark
force number
dot1p-in-profile number
| Synopsis | Dot1p marking for in-profile marking | |
| Context | configure qos network network-policy-name egress fc keyword dot1p-in-profile number | |
| Tree | dot1p-in-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
dot1p-out-profile number
| Synopsis | Dot1p marking for out-of-profile marking | |
| Context | configure qos network network-policy-name egress fc keyword dot1p-out-profile number | |
| Tree | dot1p-out-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
dscp-in-profile keyword
| Synopsis | DSCP marking for in-profile marking | |
| Context | configure qos network network-policy-name egress fc keyword dscp-in-profile keyword | |
| Tree | dscp-in-profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
dscp-out-profile keyword
| Synopsis | DSCP marking for out-of-profile marking | |
| Context | configure qos network network-policy-name egress fc keyword dscp-out-profile keyword | |
| Tree | dscp-out-profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
lsp-exp-in-profile number
| Synopsis | LSP-EXP marking for in-profile marking | |
| Context | configure qos network network-policy-name egress fc keyword lsp-exp-in-profile number | |
| Tree | lsp-exp-in-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
lsp-exp-out-profile number
| Synopsis | LSP-EXP marking for out-of-profile marking | |
| Context | configure qos network network-policy-name egress fc keyword lsp-exp-out-profile number | |
| Tree | lsp-exp-out-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure qos network network-policy-name egress fc keyword port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
policer number
queue number
ip-criteria
| Synopsis | Enter the ip-criteria context | |
| Context | configure qos network network-policy-name egress ip-criteria | |
| Tree | ip-criteria | |
| Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
[entry-id] number
| Synopsis | Entry ID for match criterion and corresponding action | |
| Context | configure qos network network-policy-name egress ip-criteria entry number | |
| Tree | entry | |
Description | This command uniquely identifies a match criterion and the corresponding action. Nokia recommends that multiple entries be given entry IDs in staggered increments. This allows users to insert a new entry in an existing policy without requiring renumbering all of the existing entries. | |
| Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
action
fc keyword
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure qos network network-policy-name egress ip-criteria entry number action port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policer number
| Synopsis | Policer ID to be used for the matched traffic | |
| Context | configure qos network network-policy-name egress ip-criteria entry number action port-redirect-group policer number | |
| Tree | policer | |
| Range | 1 to 16 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
queue number
| Synopsis | Queue to be used for post-policed traffic | |
| Context | configure qos network network-policy-name egress ip-criteria entry number action port-redirect-group queue number | |
| Tree | queue | |
| Range | 1 to 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile keyword
type keyword
description description
| Synopsis | Text description | |
| Context | configure qos network network-policy-name egress ip-criteria entry number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
match
dscp keyword
dst-ip
address (ipv4-prefix-with-host-bits | ipv4-address)
| Synopsis | Destination IPv4 address to match | |
| Context | configure qos network network-policy-name egress ip-criteria entry number match dst-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
| Synopsis | IP prefix list as the match criterion | |
| Context | configure qos network network-policy-name egress ip-criteria entry number match dst-ip ip-prefix-list reference | |
| Tree | ip-prefix-list | |
Description | This command specifies an IP prefix list used as a match criterion for an IP address. | |
Reference | configure qos match-list ip-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask ipv4-address
dst-port
eq number
gt number
| Synopsis | Value 'greater than' assigned as match condition | |
| Context | configure qos network network-policy-name egress ip-criteria entry number match dst-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
port-list reference
| Synopsis | Name of the port list as the match criterion | |
| Context | configure qos network network-policy-name egress ip-criteria entry number match dst-port port-list reference | |
| Tree | port-list | |
Reference | configure qos match-list port-list named-item | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
fragment keyword
| Synopsis | Fragmentation state as the match criterion | |
| Context | configure qos network network-policy-name egress ip-criteria entry number match fragment keyword | |
| Tree | fragment | |
Description | This command configures fragmented or non-fragmented IP packets as a network QoS policy match criterion. When unconfigured, all packets match regardless of whether they are fragmented. | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
icmp-type number
| Synopsis | ICMP type in the ICMP header of IPv4 packet to match | |
| Context | configure qos network network-policy-name egress ip-criteria entry number match icmp-type number | |
| Tree | icmp-type | |
Description | This command configures matching on the ICMP type field in the ICMP header of an IPv4 packet as a network QoS match criterion. An entry containing Layer 4 non-zero match criteria does not match non-initial (second, third, and so on) fragments of a fragmented packet because only the first fragment contains the Layer 4 information. Similarly, an entry containing a match criteria of zero may not match non-initial fragments when the Layer 4 header is not present in a packet fragment and other match criteria are also met. | |
| Range | 0 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
protocol (number | keyword)
src-ip
address (ipv4-prefix-with-host-bits | ipv4-address)
| Synopsis | Source IPv4 address to match | |
| Context | configure qos network network-policy-name egress ip-criteria entry number match src-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
| Synopsis | IP prefix list as the match criterion | |
| Context | configure qos network network-policy-name egress ip-criteria entry number match src-ip ip-prefix-list reference | |
| Tree | ip-prefix-list | |
Description | This command specifies an IP prefix list used as a match criterion for an IP address. | |
Reference | configure qos match-list ip-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask ipv4-address
src-port
eq number
gt number
| Synopsis | Value 'greater than' assigned as match condition | |
| Context | configure qos network network-policy-name egress ip-criteria entry number match src-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
port-list reference
| Synopsis | Name of the port list as the match criterion | |
| Context | configure qos network network-policy-name egress ip-criteria entry number match src-port port-list reference | |
| Tree | port-list | |
Reference | configure qos match-list port-list named-item | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
ipv6-criteria
| Synopsis | Enter the ipv6-criteria context | |
| Context | configure qos network network-policy-name egress ipv6-criteria | |
| Tree | ipv6-criteria | |
| Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
[entry-id] number
| Synopsis | Entry ID for match criterion and corresponding action | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number | |
| Tree | entry | |
Description | This command uniquely identifies a match criterion and the corresponding action. Nokia recommends that multiple entries be given entry IDs in staggered increments. This allows users to insert a new entry in an existing policy without requiring renumbering all of the existing entries. | |
| Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
action
fc keyword
port-redirect-group
| Synopsis | Enter the port-redirect-group context | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number action port-redirect-group | |
| Tree | port-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policer number
| Synopsis | Policer ID to be used for the matched traffic | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number action port-redirect-group policer number | |
| Tree | policer | |
| Range | 1 to 16 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
queue number
| Synopsis | Queue to be used for post-policed traffic | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number action port-redirect-group queue number | |
| Tree | queue | |
| Range | 1 to 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile keyword
type keyword
description description
| Synopsis | Text description | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
match
dscp keyword
dst-ip
address (ipv6-prefix-with-host-bits | ipv6-address)
| Synopsis | Destination IPv6 address to match | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match dst-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
| Synopsis | IPv6 prefix list as the match criterion | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match dst-ip ipv6-prefix-list reference | |
| Tree | ipv6-prefix-list | |
Description | This command specifies an IPv6 prefix list used as a match criterion for an IP address. | |
Reference | configure qos match-list ipv6-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask ipv6-address
dst-port
eq number
gt number
| Synopsis | Value 'greater than' assigned as match condition | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match dst-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
port-list reference
| Synopsis | Name of the port list as the match criterion | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match dst-port port-list reference | |
| Tree | port-list | |
Reference | configure qos match-list port-list named-item | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
fragment keyword
| Synopsis | Fragmentation state as the match criterion | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match fragment keyword | |
| Tree | fragment | |
Description | This command configures fragmented or non-fragmented IPv6 packets as a network QoS policy match criterion. When unconfigured, all packets match regardless of whether they are fragmented. | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
icmp-type number
| Synopsis | ICMPv6 type in ICMPv6 header of IPv6 packet to match | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match icmp-type number | |
| Tree | icmp-type | |
Description | This command configures matching on the ICMPv6 type field in the ICMPv6 header of an IPv6 packet as a network QoS match criterion. An entry containing Layer 4 non-zero match criteria does not match non-initial (second, third, and so on) fragments of a fragmented packet because only the first fragment contains the Layer 4 information. Similarly, an entry containing a match criteria of zero may not match non-initial fragments when the Layer 4 header is not present in a packet fragment and other match criteria are also met. | |
| Range | 0 to 255 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
next-header (number | keyword)
| Synopsis | IP protocol to match | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match next-header (number | keyword) | |
| Tree | next-header | |
| Range | 0 to 255 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
address (ipv6-prefix-with-host-bits | ipv6-address)
| Synopsis | Source IPv6 address to match | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match src-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
| Synopsis | IPv6 prefix list as the match criterion | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match src-ip ipv6-prefix-list reference | |
| Tree | ipv6-prefix-list | |
Description | This command specifies an IPv6 prefix list used as a match criterion for an IP address. | |
Reference | configure qos match-list ipv6-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask ipv6-address
src-port
eq number
gt number
| Synopsis | Value 'greater than' assigned as match condition | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match src-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
port-list reference
| Synopsis | Name of the port list as the match criterion | |
| Context | configure qos network network-policy-name egress ipv6-criteria entry number match src-port port-list reference | |
| Tree | port-list | |
Reference | configure qos match-list port-list named-item | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
prec [prec-value] number
[prec-value] number
fc keyword
profile keyword
remark-trusted
| Synopsis | Enable the remark-trusted context | |
| Context | configure qos network network-policy-name egress remark-trusted | |
| Tree | remark-trusted | |
| Introduced | 16.0.R1 | |
Platforms | All |
force-egress-marking boolean
| Synopsis | Remark DSCP bits in the internal IP header | |
| Context | configure qos network network-policy-name egress remark-trusted force-egress-marking boolean | |
| Tree | force-egress-marking | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ingress
default-action
| Synopsis | Enter the default-action context | |
| Context | configure qos network network-policy-name ingress default-action | |
| Tree | default-action | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
profile keyword
dot1p [dot1p-value] number
[dot1p-value] number
fc keyword
profile keyword
dscp [dscp-name] keyword
[dscp-name] keyword
fc keyword
profile keyword
fc [fc-name] keyword
[fc-name] keyword
fp-redirect-group
| Synopsis | Enter the fp-redirect-group context | |
| Context | configure qos network network-policy-name ingress fc keyword fp-redirect-group | |
| Tree | fp-redirect-group | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
broadcast-policer number
| Synopsis | Policer to be used for broadcast traffic | |
| Context | configure qos network network-policy-name ingress fc keyword fp-redirect-group broadcast-policer number | |
| Tree | broadcast-policer | |
| Range | 1 to 32 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
multicast-policer number
| Synopsis | Policer to be used for multicast traffic | |
| Context | configure qos network network-policy-name ingress fc keyword fp-redirect-group multicast-policer number | |
| Tree | multicast-policer | |
| Range | 1 to 32 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policer number
unknown-policer number
| Synopsis | Policer to be used for unknown traffic | |
| Context | configure qos network network-policy-name ingress fc keyword fp-redirect-group unknown-policer number | |
| Tree | unknown-policer | |
| Range | 1 to 32 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
ip-criteria
| Synopsis | Enter the ip-criteria context | |
| Context | configure qos network network-policy-name ingress ip-criteria | |
| Tree | ip-criteria | |
| Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
[entry-id] number
action
fc keyword
profile keyword
type keyword
description description
| Synopsis | Text description | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
match
dscp keyword
dst-ip
address (ipv4-prefix-with-host-bits | ipv4-address)
| Synopsis | Destination IPv4 address for network QoS policy match | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number match dst-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
| Synopsis | IPv4 prefix list containing IPv4 prefixes to match | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number match dst-ip ip-prefix-list reference | |
| Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R4 | |
Platforms | All |
mask ipv4-address
dst-port
eq number
gt number
| Synopsis | Greater than destination port value as match criterion | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number match dst-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Less than destination port value as the match criterion | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number match dst-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
port-list reference
| Synopsis | Port list used as match criterion | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number match dst-port port-list reference | |
| Tree | port-list | |
Description | This command assigns a port list to a matching criteria entry in the network QoS policy. Each entry can use only a single port list. Port lists and prefix lists are mutually exclusive. | |
Reference | configure qos match-list port-list named-item | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
fragment keyword
protocol (number | keyword)
src-ip
address (ipv4-prefix-with-host-bits | ipv4-address)
| Synopsis | Source IPv4 address for network QoS policy match | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number match src-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
| Synopsis | IPv4 prefix list containing IPv4 prefixes to match | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number match src-ip ip-prefix-list reference | |
| Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R4 | |
Platforms | All |
mask ipv4-address
src-port
eq number
gt number
| Synopsis | Greater than source port value as match criterion | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number match src-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Less than destination port value as the match criterion | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number match src-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
port-list reference
| Synopsis | Port list used as match criterion | |
| Context | configure qos network network-policy-name ingress ip-criteria entry number match src-port port-list reference | |
| Tree | port-list | |
Description | This command assigns a port list to a matching criteria entry in the network QoS policy. Each entry can use only a single port list. Port lists and prefix lists are mutually exclusive. | |
Reference | configure qos match-list port-list named-item | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
ipv6-criteria
| Synopsis | Enter the ipv6-criteria context | |
| Context | configure qos network network-policy-name ingress ipv6-criteria | |
| Tree | ipv6-criteria | |
| Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
[entry-id] number
action
fc keyword
profile keyword
type keyword
description description
| Synopsis | Text description | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
match
dscp keyword
dst-ip
address (ipv6-prefix-with-host-bits | ipv6-address)
| Synopsis | Destination IPv6 address for network QoS policy match | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match dst-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
| Synopsis | IPv6 prefix list containing IPv6 prefixes to match | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match dst-ip ipv6-prefix-list reference | |
| Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R4 | |
Platforms | All |
mask ipv6-address
| Synopsis | IP address to match with source IP of the packet | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match dst-ip mask ipv6-address | |
| Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
dst-port
eq number
| Synopsis | Exact destination port as the match criterion | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match dst-port eq number | |
| Tree | eq | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
gt number
| Synopsis | Greater than destination port value as match criterion | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match dst-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Less than destination port value as the match criterion | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match dst-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
port-list reference
| Synopsis | Port list used as match criterion | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match dst-port port-list reference | |
| Tree | port-list | |
Description | This command assigns a port list to a matching criteria entry in the network QoS policy. Each entry can use only a single port list. Port lists and prefix lists are mutually exclusive. | |
Reference | configure qos match-list port-list named-item | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
fragment keyword
next-header (number | keyword)
| Synopsis | IP protocol to match | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match next-header (number | keyword) | |
| Tree | next-header | |
| Range | 0 to 255 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
address (ipv6-prefix-with-host-bits | ipv6-address)
| Synopsis | Source IPv6 address for network QoS policy match | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match src-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
| Synopsis | IPv6 prefix list containing IPv6 prefixes to match | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match src-ip ipv6-prefix-list reference | |
| Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R4 | |
Platforms | All |
mask ipv6-address
| Synopsis | IP address to match with source IP of the packet | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match src-ip mask ipv6-address | |
| Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
src-port
eq number
gt number
| Synopsis | Greater than source port value as match criterion | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match src-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Less than destination port value as the match criterion | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match src-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
port-list reference
| Synopsis | Port list used as match criterion | |
| Context | configure qos network network-policy-name ingress ipv6-criteria entry number match src-port port-list reference | |
| Tree | port-list | |
Description | This command assigns a port list to a matching criteria entry in the network QoS policy. Each entry can use only a single port list. Port lists and prefix lists are mutually exclusive. | |
Reference | configure qos match-list port-list named-item | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
| Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
ler-use-dscp boolean
| Synopsis | Honor the DSCP markings instead of the LSP-EXP bits | |
| Context | configure qos network network-policy-name ingress ler-use-dscp boolean | |
| Tree | ler-use-dscp | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
lsp-exp [lsp-exp-value] number
[lsp-exp-value] number
fc keyword
profile keyword
policy-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | QoS network policy ID | |
| Context | configure qos network network-policy-name policy-id number | |
| Tree | policy-id | |
Description | This command specifies the QoS network policy ID and uniquely identifies the policy on the router. Network policy-id 1 exists as the default policy that is applied to all network interfaces by default. The network policy-id 1 cannot be modified or deleted. It defines the default DSCP-to-FC mapping and MPLS EXP-to-FC mapping for the ingress. For the egress, it defines forwarding classes that represent individual queues and the packet marking criteria. Network policy-id 1 exists as the default policy that is applied to all network ports by default. This default policy cannot be modified or deleted. It defines the default DSCP-to-FC mapping and default unicast meters for ingress IP traffic. For the egress, it defines the forwarding class to dot1p and DSCP values and the packet marking criteria. If a new network policy is created (for instance, policy-id 3), only the default action and egress forwarding class parameters are identical to the default policy. A new network policy does not contain the default DSCP-to-FC and MPLS-EXP-to-FC mapping for network QoS policy of type ip-interface or the DSCP-to-FC mapping (for network QoS policy of type port). The default network policy can be copied to create a new network policy that includes the default ingress DSCP-to-FC and MPLS EXP-to-FC mapping (as appropriate). | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
scope keyword
network-queue [network-queue-policy] named-item
| Synopsis | Enter the network-queue list instance | |
| Context | configure qos network-queue named-item | |
| Tree | network-queue | |
| Max. instances | 255 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[network-queue-policy] named-item
| Synopsis | Name for network queue policy | |
| Context | configure qos network-queue named-item | |
| Tree | network-queue | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos network-queue named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc [fc-name] keyword
| Synopsis | Enter the fc list instance | |
| Context | configure qos network-queue named-item fc keyword | |
| Tree | fc | |
| Introduced | 16.0.R1 | |
Platforms | All |
[fc-name] keyword
| Synopsis | Forwarding class name | |
| Context | configure qos network-queue named-item fc keyword | |
| Tree | fc | |
| Options | ||
Notes |
This element is part of a list key. | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
multicast-queue reference
| Synopsis | Multicast queue for packets in this forwarding class | |
| Context | configure qos network-queue named-item fc keyword multicast-queue reference | |
| Tree | multicast-queue | |
Reference | configure qos network-queue named-item queue number | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue reference
| Synopsis | Queue for packets in this forwarding class | |
| Context | configure qos network-queue named-item fc keyword queue reference | |
| Tree | queue | |
Reference | configure qos network-queue named-item queue number | |
| Introduced | 16.0.R1 | |
Platforms | All |
hs-attachment-policy reference
| Synopsis | HS attachment policy applied | |
| Context | configure qos network-queue named-item hs-attachment-policy reference | |
| Tree | hs-attachment-policy | |
Reference | configure qos hs-attachment-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] number
| Synopsis | Enter the hs-wrr-group list instance | |
| Context | configure qos network-queue named-item hs-wrr-group number | |
| Tree | hs-wrr-group | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] number
| Synopsis | HS WRR group identifier | |
| Context | configure qos network-queue named-item hs-wrr-group number | |
| Tree | hs-wrr-group | |
| Range | 1 to 2 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos network-queue named-item hs-wrr-group number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos network-queue named-item hs-wrr-group number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Weight of scheduling class | |
| Context | configure qos network-queue named-item hs-wrr-group number hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
rate number
| Synopsis | PIR rate | |
| Context | configure qos network-queue named-item hs-wrr-group number rate number | |
| Tree | rate | |
| Range | 1 to 100 | |
| Units | kilobps | |
| Default | 100 | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
queue [queue-id] number
| Synopsis | Enter the queue list instance | |
| Context | configure qos network-queue named-item queue number | |
| Tree | queue | |
| Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
| Synopsis | Queue identifier | |
| Context | configure qos network-queue named-item queue number | |
| Tree | queue | |
| Range | 1 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos network-queue named-item queue number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure qos network-queue named-item queue number adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fir keyword
| Synopsis | Constraint used when deriving the operational FIR value | |
| Context | configure qos network-queue named-item queue number adaptation-rule fir keyword | |
| Tree | fir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R2 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos network-queue named-item queue number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
avg-frame-overhead decimal-number
| Synopsis | Average packet-to-frame encapsulation overhead | |
| Context | configure qos network-queue named-item queue number avg-frame-overhead decimal-number | |
| Tree | avg-frame-overhead | |
Description | This command configures the average frame overhead, expressed as a percentage, at which the offered load expands on the physical medium (wire) at egress. This is important for accurate "on-the-wire" rate calculations at various levels of H-QoS that do not inherently account for the physical medium characteristics. For example, without considering this overhead, a port scheduler in H-QoS might inaccurately estimate the available bandwidth on the wire, potentially leading to congestion issues and unexpected packet loss. The rates impacted by the average frame overhead encompass the rates set on port-schedulers and aggregate rate limits for subscribers and Vports. This impact is evident in the configured values, which represent on-the-wire rates. Queue configured rates, however, remain unaffected by this adjustment and continue to reflect Layer 2 rates. Configure the average frame overhead in networks with physical mediums that have constant sizes of transmission units (packets or cells) or in scenarios where the average packet size is known. The average frame overhead only affects rate and weight calculations and does not impact collected statistics for accounting purposes. For Ethernet ports, the effect of this command depends on the setting of the avg-frame-overhead-mode command in advanced QoS configuration policy associated with the queue. If the avg-frame-overhead-mode is set to auto, the packet encapsulation overhead calculation is based on a fixed 20 bytes (7 bytes for preamble, 1 byte for start of frame delimiter and 12 bytes for Inter-Frame Gap (IFG)) that Ethernet medium adds to every packet during transmission. In other words, the configured rates for port scheduler and aggregate rate limits for subscribers and Vports represent on-the-wire rates. | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cbs decimal-number
| Synopsis | Reserved buffer space for the queue | |
| Context | configure qos network-queue named-item queue number cbs decimal-number | |
| Tree | cbs | |
| Range | 0.00 to 100.00 | |
| Units | centipercent | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
drop-tail
| Synopsis | Enter the drop-tail context | |
| Context | configure qos network-queue named-item queue number drop-tail | |
| Tree | drop-tail | |
| Introduced | 16.0.R1 | |
Platforms | All |
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Low drop-tail percent from MBS that is reduced | |
| Context | configure qos network-queue named-item queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
hs-alt-port-class-pool boolean
| Synopsis | Use HS alternate class port pool buffer for traffic | |
| Context | configure qos network-queue named-item queue number hs-alt-port-class-pool boolean | |
| Tree | hs-alt-port-class-pool | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Scheduling class weight | |
| Context | configure qos network-queue named-item queue number hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
hs-mbs decimal-number
| Synopsis | Percentage of buffer space allowed for the HS queue | |
| Context | configure qos network-queue named-item queue number hs-mbs decimal-number | |
| Tree | hs-mbs | |
| Range | 0.00 to 100.00 | |
| Default | 100.00 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
hs-wred-queue
| Synopsis | Enter the hs-wred-queue context | |
| Context | configure qos network-queue named-item queue number hs-wred-queue | |
| Tree | hs-wred-queue | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
| Synopsis | Slope policy name | |
| Context | configure qos network-queue named-item queue number hs-wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
| Synopsis | WRR weight with which queue parents into the scheduler | |
| Context | configure qos network-queue named-item queue number hs-wrr-weight number | |
| Tree | hs-wrr-weight | |
| Range | 1 to 127 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
mbs decimal-number
| Synopsis | Percentage of buffer space allowed for the queue | |
| Context | configure qos network-queue named-item queue number mbs decimal-number | |
| Tree | mbs | |
| Range | 0.00 to 100.00 | |
| Units | centipercent | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
multipoint boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Apply as a multicast queue | |
| Context | configure qos network-queue named-item queue number multipoint boolean | |
| Tree | multipoint | |
| Introduced | 16.0.R1 | |
Platforms | All | |
port-parent
| Synopsis | Enable the port-parent context | |
| Context | configure qos network-queue named-item queue number port-parent | |
| Tree | port-parent | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
| Synopsis | Port priority to receive bandwidth for within-CIR pass | |
| Context | configure qos network-queue named-item queue number port-parent cir-level number | |
| Tree | cir-level | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
| Synopsis | Weight to receive bandwidth at the within-CIR level | |
| Context | configure qos network-queue named-item queue number port-parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
level number
| Synopsis | Port priority level for above-CIR behavior | |
| Context | configure qos network-queue named-item queue number port-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure qos network-queue named-item queue number port-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
queue-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Priority that this queue receives from the hardware level schedulers | |
| Context | configure qos network-queue named-item queue number queue-type keyword | |
| Tree | queue-type | |
| Options | ||
| Default | auto-expedited | |
| Introduced | 16.0.R1 | |
Platforms | All | |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos network-queue named-item queue number rate | |
| Tree | rate | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir number
fir number
| Synopsis | FIR percentage | |
| Context | configure qos network-queue named-item queue number rate fir number | |
| Tree | fir | |
Description | This command defines an additional percentage at which the system prioritizes the queue over other queues competing for the same bandwidth above that used by the CIR percentage. | |
| Range | 0 to 100 | |
| Units | percent | |
| Default | 0 | |
| Introduced | 16.0.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
pir number
policer-control-policy [policer-control-policy-name] named-item
| Synopsis | Enter the policer-control-policy list instance | |
| Context | configure qos policer-control-policy named-item | |
| Tree | policer-control-policy | |
| Max. instances | 2047 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[policer-control-policy-name] named-item
| Synopsis | Policer control policy name | |
| Context | configure qos policer-control-policy named-item | |
| Tree | policer-control-policy | |
Description | This command specifies the policer control policy name. Each policer control policy must be created with a unique policy name. | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description description
| Synopsis | Text description | |
| Context | configure qos policer-control-policy named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
root
| Synopsis | Enter the root context | |
| Context | configure qos policer-control-policy named-item root | |
| Tree | root | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
max-percent-rate decimal-number
| Synopsis | Maximum rate of the arbiter | |
| Context | configure qos policer-control-policy named-item root max-percent-rate decimal-number | |
| Tree | max-percent-rate | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: max-percent-rate or max-rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
max-rate (number | keyword)
| Synopsis | Maximum frame-based bandwidth limit of the arbiter | |
| Context | configure qos policer-control-policy named-item root max-rate (number | keyword) | |
| Tree | max-rate | |
| Range | 1 to 6400000000 | |
| Options | ||
| Default | max | |
Notes | The following elements are part of a choice: max-percent-rate or max-rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority-mbs-thresholds
| Synopsis | Enter the priority-mbs-thresholds context | |
| Context | configure qos policer-control-policy named-item root priority-mbs-thresholds | |
| Tree | priority-mbs-thresholds | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
| Synopsis | Minimum separation between policer discard thresholds | |
| Context | configure qos policer-control-policy named-item root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
| Tree | min-thresh-separation | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
| Synopsis | Enter the priority list instance | |
| Context | configure qos policer-control-policy named-item root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[priority-level] number
| Synopsis | Priority level | |
| Context | configure qos policer-control-policy named-item root priority-mbs-thresholds priority number | |
| Tree | priority | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
fixed-mbs boolean
| Synopsis | Consider cumulative buffer space to be fixed | |
| Context | configure qos policer-control-policy named-item root priority-mbs-thresholds priority number fixed-mbs boolean | |
| Tree | fixed-mbs | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
| Synopsis | Minimum amount of cumulative buffer space | |
| Context | configure qos policer-control-policy named-item root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
| Tree | mbs-contribution | |
| Range | 0 to 16777216 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile-preferred boolean
| Synopsis | Provide a preference to consume PIR bucket tokens | |
| Context | configure qos policer-control-policy named-item root profile-preferred boolean | |
| Tree | profile-preferred | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
tier [tier-id] number
| Synopsis | Enter the tier list instance | |
| Context | configure qos policer-control-policy named-item tier number | |
| Tree | tier | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[tier-id] number
| Synopsis | Tier for policer control policer arbiter | |
| Context | configure qos policer-control-policy named-item tier number | |
| Tree | tier | |
| Range | 1 to 2 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter [arbiter-name] named-item
| Synopsis | Enter the arbiter list instance | |
| Context | configure qos policer-control-policy named-item tier number arbiter named-item | |
| Tree | arbiter | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[arbiter-name] named-item
| Synopsis | Arbiter name | |
| Context | configure qos policer-control-policy named-item tier number arbiter named-item | |
| Tree | arbiter | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-parent
| Synopsis | Enter the arbiter-parent context | |
| Context | configure qos policer-control-policy named-item tier number arbiter named-item arbiter-parent | |
| Tree | arbiter-parent | |
| Introduced | 16.0.R3 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-name named-item
| Synopsis | Arbiter name | |
| Context | configure qos policer-control-policy named-item tier number arbiter named-item arbiter-parent arbiter-name named-item | |
| Tree | arbiter-name | |
Description | This command specifies the arbiter name. In tier 1, the arbiter name is not allowed and only the system reversed name "root" is accepted. The specified arbiter name must exist within the policer control policy at tier 1 or the parent command fails. When a tiered arbiter is acting as a parent for another tiered arbiter, the parent arbiter cannot be removed from the policy. The child arbiter receives all bandwidth directly from its parent arbiter (that receives bandwidth from the root arbiter). | |
| String length | 1 to 32 | |
| Introduced | 16.0.R3 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
| Synopsis | Level the child arbiter uses on its parent | |
| Context | configure qos policer-control-policy named-item tier number arbiter named-item arbiter-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R3 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
| Synopsis | Weight attribute at parent level applied to children | |
| Context | configure qos policer-control-policy named-item tier number arbiter named-item arbiter-parent weight number | |
| Tree | weight | |
Description | This command defines how multiple children at the same parent strict level compete when insufficient bandwidth exists on the parent for that level. Each child's weight is divided by the sum of the active children's weights and the result is multiplied by the available bandwidth. If a child cannot receive its entire weighted fair share of bandwidth due to a defined child rate limit, the remainder of its bandwidth is distributed between the other children based on their weights. | |
| Range | 1 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R3 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description description
| Synopsis | Text description | |
| Context | configure qos policer-control-policy named-item tier number arbiter named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate decimal-number
| Synopsis | Maximum rate of the arbiter | |
| Context | configure qos policer-control-policy named-item tier number arbiter named-item percent-rate decimal-number | |
| Tree | percent-rate | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: (percent-rate and reference-rate) or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
rate (number | keyword)
| Synopsis | Maximum frame-based bandwidth limit | |
| Context | configure qos policer-control-policy named-item tier number arbiter named-item rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 6400000000 | |
| Options | ||
| Default | max | |
Notes | The following elements are part of a choice: (percent-rate and reference-rate) or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
reference-rate keyword
| Synopsis | Reference rate | |
| Context | configure qos policer-control-policy named-item tier number arbiter named-item reference-rate keyword | |
| Tree | reference-rate | |
| Options | ||
| Default | local-limit | |
|
Notes | The following elements are part of a choice: (percent-rate and reference-rate) or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
port-scheduler-policy [name] named-item
| Synopsis | Enter the port-scheduler-policy list instance | |
| Context | configure qos port-scheduler-policy named-item | |
| Tree | port-scheduler-policy | |
| Max. instances | 1023 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[name] named-item
| Synopsis | Port scheduler policy name | |
| Context | configure qos port-scheduler-policy named-item | |
| Tree | port-scheduler-policy | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos port-scheduler-policy named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dist-lag-rate-shared boolean
| Synopsis | Share rates when port is part of LAG in distribute mode | |
| Context | configure qos port-scheduler-policy named-item dist-lag-rate-shared boolean | |
| Tree | dist-lag-rate-shared | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
group [group-name] named-item
| Synopsis | Enter the group list instance | |
| Context | configure qos port-scheduler-policy named-item group named-item | |
| Tree | group | |
| Max. instances | 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[group-name] named-item
| Synopsis | Weighted scheduler group name | |
| Context | configure qos port-scheduler-policy named-item group named-item | |
| Tree | group | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
monitor-threshold number
| Synopsis | Congestion monitoring threshold | |
| Context | configure qos port-scheduler-policy named-item group named-item monitor-threshold number | |
| Tree | monitor-threshold | |
Description | This command defines the congestion monitoring threshold for the desired monitoring entity under the port scheduler for per aggregate port scheduler rate, per individual level, and per group that is aggregating multiple levels. The congestion threshold is specified as a percentage of the configured PIR for the entity for which congestion monitoring is desired. For example, if the configured PIR for level 1 is 100000 kb/s, and the monitoring threshold is set to 90%, an event where the offered rate is greater than 90,000 kb/s is recorded. This event is shown as part of the cumulative count of congestion threshold exceeds since the last clearing of the counters. | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos port-scheduler-policy named-item group named-item percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
| Synopsis | Administrative CIR percent | |
| Context | configure qos port-scheduler-policy named-item group named-item percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Default | 100.00 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
pir decimal-number
| Synopsis | Administrative PIR percent | |
| Context | configure qos port-scheduler-policy named-item group named-item percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | All |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos port-scheduler-policy named-item group named-item rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
pir (number | keyword)
hqos-algorithm keyword
| Synopsis | Port scheduler H-QoS algorithm | |
| Context | configure qos port-scheduler-policy named-item hqos-algorithm keyword | |
| Tree | hqos-algorithm | |
Description | This command configures the port scheduler H-QoS algorithm used to calculate the operational rates for the children connected to the port scheduler. | |
| Options | ||
| Default | default | |
| Introduced | 19.10.R2 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
level [level-id] number
| Synopsis | Enter the level list instance | |
| Context | configure qos port-scheduler-policy named-item level number | |
| Tree | level | |
| Introduced | 16.0.R1 | |
Platforms | All |
[level-id] number
| Synopsis | Priority level this port scheduler policy | |
| Context | configure qos port-scheduler-policy named-item level number | |
| Tree | level | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
group reference
| Synopsis | Associated group | |
| Context | configure qos port-scheduler-policy named-item level number group reference | |
| Tree | group | |
Reference | configure qos port-scheduler-policy named-item group named-item | |
| Introduced | 16.0.R1 | |
Platforms | All |
monitor-threshold number
| Synopsis | Monitoring threshold of the configured rate | |
| Context | configure qos port-scheduler-policy named-item level number monitor-threshold number | |
| Tree | monitor-threshold | |
Description | This command specifies the configured rate as a percentage. If the offered rate exceeds the configured threshold, a counter monitoring the threshold is increased. | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos port-scheduler-policy named-item level number percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
| Synopsis | Administrative CIR percent | |
| Context | configure qos port-scheduler-policy named-item level number percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Default | 100.00 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
pir decimal-number
| Synopsis | Administrative PIR percent | |
| Context | configure qos port-scheduler-policy named-item level number percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | All |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos port-scheduler-policy named-item level number rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
pir (number | keyword)
weight number
| Synopsis | Weight of the level in the weighted scheduler group | |
| Context | configure qos port-scheduler-policy named-item level number weight number | |
| Tree | weight | |
| Range | 1 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
max-percent-rate decimal-number
| Synopsis | Maximum frame-based bandwidth limit | |
| Context | configure qos port-scheduler-policy named-item max-percent-rate decimal-number | |
| Tree | max-percent-rate | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: max-percent-rate or max-rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
max-rate (number | keyword)
| Synopsis | Maximum frame-based bandwidth limit | |
| Context | configure qos port-scheduler-policy named-item max-rate (number | keyword) | |
| Tree | max-rate | |
| Range | 1 to 6400000000 | |
| Options | ||
| Default | max | |
Notes | The following elements are part of a choice: max-percent-rate or max-rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
monitor-threshold number
| Synopsis | Congestion monitoring threshold | |
| Context | configure qos port-scheduler-policy named-item monitor-threshold number | |
| Tree | monitor-threshold | |
Description | This command defines the congestion monitoring threshold for the desired monitoring entity under the port-scheduler for per aggregate port scheduler rate, per individual level, and per group that is aggregating multiple levels. The congestion threshold is specified as a percentage of the configured PIR rate for the entity for which congestion monitoring is desired. For example, if the configured PIR rate for level 1 is 1000,000 kb/s, and the monitoring threshold is set to 90%, an event where the offered rate is >90,000 kb/s is recorded. This event is shown as part of the cumulative count of congestion threshold exceeds since the last clearing of the counters. | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
orphan-overrides
| Synopsis | Enter the orphan-overrides context | |
| Context | configure qos port-scheduler-policy named-item orphan-overrides | |
| Tree | orphan-overrides | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
| Synopsis | Port priority level for within-CIR orphan behavior | |
| Context | configure qos port-scheduler-policy named-item orphan-overrides cir-level number | |
| Tree | cir-level | |
Description | This command defines the port priority that the orphan queues and schedulers use to receive bandwidth for their within-CIR offered-load. If the cir-weight command is set to the default value, the orphan queues and schedulers do not receive bandwidth during the port scheduler’s within-CIR pass and this command setting is ignored. | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
| Synopsis | Weight to use in the within-CIR port priority level | |
| Context | configure qos port-scheduler-policy named-item orphan-overrides cir-weight number | |
| Tree | cir-weight | |
Description | This command defines the weight the orphan queues and schedulers will use in the within-CIR port priority level. When this command is set to the default value, the orphan queues and schedulers do not receive bandwidth during the port scheduler’s within-CIR pass and the cir-level command is ignored. | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
level number
| Synopsis | Port priority level for above-CIR orphan behavior | |
| Context | configure qos port-scheduler-policy named-item orphan-overrides level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
weight number
| Synopsis | Weight to use in the above-CIR port priority level | |
| Context | configure qos port-scheduler-policy named-item orphan-overrides weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
post-policer-mapping [name] named-item
| Synopsis | Enter the post-policer-mapping list instance | |
| Context | configure qos post-policer-mapping named-item | |
| Tree | post-policer-mapping | |
| Max. instances | 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[name] named-item
| Synopsis | Post-policer mapping policy name | |
| Context | configure qos post-policer-mapping named-item | |
| Tree | post-policer-mapping | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description description
| Synopsis | Text description | |
| Context | configure qos post-policer-mapping named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
fc [fc-name] keyword profile keyword
| Synopsis | Enter the fc list instance | |
| Context | configure qos post-policer-mapping named-item fc keyword profile keyword | |
| Tree | fc | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[fc-name] keyword
| Synopsis | Forwarding class remapping | |
| Context | configure qos post-policer-mapping named-item fc keyword profile keyword | |
| Tree | fc | |
| Options | ||
Notes |
This element is part of a list key. | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile keyword
| Synopsis | Egress packet profile remapping | |
| Context | configure qos post-policer-mapping named-item fc keyword profile keyword | |
| Tree | fc | |
| Options | ||
|
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
maps-to
fc keyword
profile keyword
queue-group-redirect-list [name] named-item
| Synopsis | Enter the queue-group-redirect-list list instance | |
| Context | configure qos queue-group-redirect-list named-item | |
| Tree | queue-group-redirect-list | |
| Max. instances | 2047 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[name] named-item
| Synopsis | Queue group redirect list name | |
| Context | configure qos queue-group-redirect-list named-item | |
| Tree | queue-group-redirect-list | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
match [field-value] number
| Synopsis | Enter the match list instance | |
| Context | configure qos queue-group-redirect-list named-item match number | |
| Tree | match | |
| Max. instances | 16 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
[field-value] number
| Synopsis | Field value in the ingress or egress packet to match | |
| Context | configure qos queue-group-redirect-list named-item match number | |
| Tree | match | |
Description | This command specifies the value of the field in the ingress or egress packet. When there is a match, the packet is redirected to the specified queue group instance. The field must be a valid VXLAN VNI. | |
| Range | 1 to 16777215 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Queue group instance for traffic redirection | |
| Context | configure qos queue-group-redirect-list named-item match number instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
type keyword
| Synopsis | Type for queue-group redirect list | |
| Context | configure qos queue-group-redirect-list named-item type keyword | |
| Tree | type | |
| Options | ||
| Default | vxlan-vni | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue-group-templates
| Synopsis | Enter the queue-group-templates context | |
| Context | configure qos queue-group-templates | |
| Tree | queue-group-templates | |
| Introduced | 16.0.R1 | |
Platforms | All |
egress
| Synopsis | Enter the egress context | |
| Context | configure qos queue-group-templates egress | |
| Tree | egress | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group [egress-queue-group-name] named-item
| Synopsis | Enter the queue-group list instance | |
| Context | configure qos queue-group-templates egress queue-group named-item | |
| Tree | queue-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
[egress-queue-group-name] named-item
| Synopsis | Egress queue group template name | |
| Context | configure qos queue-group-templates egress queue-group named-item | |
| Tree | queue-group | |
Description | This command specifies the name of the egress queue group template. Each ingress queue group template must be uniquely named within the system. Multiple ingress queue group templates may not share the same name. An ingress and egress queue group template may share the same name. | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description-or-empty
| Synopsis | Text description | |
| Context | configure qos queue-group-templates egress queue-group named-item description description-or-empty | |
| Tree | description | |
| String length | 0 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc [fc-name] keyword
| Synopsis | Enter the fc list instance | |
| Context | configure qos queue-group-templates egress queue-group named-item fc keyword | |
| Tree | fc | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[fc-name] keyword
| Synopsis | Forwarding class name | |
| Context | configure qos queue-group-templates egress queue-group named-item fc keyword | |
| Tree | fc | |
| Options | ||
Notes |
This element is part of a list key. | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
queue
| Synopsis | Enter the queue context | |
| Context | configure qos queue-group-templates egress queue-group named-item fc keyword queue | |
| Tree | queue | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
none
| Synopsis | No mid-pool is associated with this parent-pool | |
| Context | configure qos queue-group-templates egress queue-group named-item fc keyword queue none | |
| Tree | none | |
Notes | The following elements are part of a choice: none or queue-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
queue-id reference
| Synopsis | Queue defined in forwarding class mapping | |
| Context | configure qos queue-group-templates egress queue-group named-item fc keyword queue queue-id reference | |
| Tree | queue-id | |
Reference | configure qos queue-group-templates egress queue-group named-item queue number | |
Notes | The following elements are part of a choice: none or queue-id. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
hs-attachment-policy reference
| Synopsis | HS attachment policy applied | |
| Context | configure qos queue-group-templates egress queue-group named-item hs-attachment-policy reference | |
| Tree | hs-attachment-policy | |
Reference | configure qos hs-attachment-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] number
| Synopsis | Enter the hs-wrr-group list instance | |
| Context | configure qos queue-group-templates egress queue-group named-item hs-wrr-group number | |
| Tree | hs-wrr-group | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] number
| Synopsis | HS WRR group identifier | |
| Context | configure qos queue-group-templates egress queue-group named-item hs-wrr-group number | |
| Tree | hs-wrr-group | |
| Range | 1 to 2 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos queue-group-templates egress queue-group named-item hs-wrr-group number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos queue-group-templates egress queue-group named-item hs-wrr-group number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Weight of scheduling class | |
| Context | configure qos queue-group-templates egress queue-group named-item hs-wrr-group number hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
percent-rate decimal-number
| Synopsis | Administrative PIR percent | |
| Context | configure qos queue-group-templates egress queue-group named-item hs-wrr-group number percent-rate decimal-number | |
| Tree | percent-rate | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
| Synopsis | Administrative PIR | |
| Context | configure qos queue-group-templates egress queue-group named-item hs-wrr-group number rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Default | max | |
Notes |
The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policer [policer-id] number
| Synopsis | Enter the policer list instance | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number | |
| Tree | policer | |
Description | Commands in this context configure a QoS egress queue-group policer. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[policer-id] number
| Synopsis | Egress queue-group policer ID | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number | |
| Tree | policer | |
Description | This command specifies the queue-group policer that will either be created or edited within the queue group template. For VSR, the queue group template may only have up to eight policers (numbered 1 through 8). | |
| Range | 1 to 16 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adv-config-policy reference
| Synopsis | Advanced QoS policy name | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number adv-config-policy reference | |
| Tree | adv-config-policy | |
Reference | configure qos adv-config-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-parent
| Synopsis | Enter the arbiter-parent context | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number arbiter-parent | |
| Tree | arbiter-parent | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-name named-item
| Synopsis | Arbiter name | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number arbiter-parent arbiter-name named-item | |
| Tree | arbiter-name | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
| Synopsis | Priority level | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number arbiter-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
| Synopsis | Weight in the priority level | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number arbiter-parent weight number | |
| Tree | weight | |
| Range | 1 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
| Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description description
| Synopsis | Text description | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
exceed-pir boolean
| Synopsis | Forward packets exceeding the PIR as exceed-profile | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number exceed-pir boolean | |
| Tree | exceed-pir | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
high-prio-only (number | keyword)
| Synopsis | Percentage of MBS reserved for high priority traffic | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number high-prio-only (number | keyword) | |
| Tree | high-prio-only | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs (number | keyword)
| Synopsis | Maximum buffer size for the template queue | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 31 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
| Synopsis | Administrative CIR | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir decimal-number
| Synopsis | Administrative PIR | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
reference-rate keyword
| Synopsis | Reference rate | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number percent-rate reference-rate keyword | |
| Tree | reference-rate | |
| Options | ||
| Default | local-limit | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile-capped boolean
| Synopsis | Enforce a limit on the profile | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number profile-capped boolean | |
| Tree | profile-capped | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
| Synopsis | Administrative CIR | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number rate cir (number | keyword) | |
| Tree | cir | |
| Range | 0 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir (number | keyword)
| Synopsis | Administrative PIR | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number rate pir (number | keyword) | |
| Tree | pir | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Default | max | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
stat-mode keyword
| Synopsis | Mode of statistics collected by the policer | |
| Context | configure qos queue-group-templates egress queue-group named-item policer number stat-mode keyword | |
| Tree | stat-mode | |
| Options | ||
| Default | minimal | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
queue [queue-id] number
| Synopsis | Enter the queue list instance | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number | |
| Tree | queue | |
| Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
| Synopsis | Egress Queue-Group queue identifier | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number | |
| Tree | queue | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
adv-config-policy reference
| Synopsis | Name of the advanced configuration policy | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number adv-config-policy reference | |
| Tree | adv-config-policy | |
Reference | configure qos adv-config-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | All |
burst-limit (number | keyword)
| Synopsis | Explicit shaping burst size of a queue | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
cbs (number | keyword)
| Synopsis | Reserved buffer space for the queue | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 1048576 | |
| Units | kilobytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
drop-tail
| Synopsis | Enter the drop-tail context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number drop-tail | |
| Tree | drop-tail | |
| Introduced | 16.0.R1 | |
Platforms | All |
exceed
| Synopsis | Enter the exceed context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number drop-tail exceed | |
| Tree | exceed | |
| Introduced | 16.0.R1 | |
Platforms | All |
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number drop-tail exceed percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
high
| Synopsis | Enter the high context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number drop-tail high | |
| Tree | high | |
| Introduced | 16.0.R1 | |
Platforms | All |
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number drop-tail high percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
highplus
| Synopsis | Enter the highplus context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number drop-tail highplus | |
| Tree | highplus | |
| Introduced | 16.0.R1 | |
Platforms | All |
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number drop-tail highplus percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
low
| Synopsis | Enter the low context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number drop-tail low | |
| Tree | low | |
| Introduced | 16.0.R1 | |
Platforms | All |
percent-reduction-from-mbs (number | keyword)
| Synopsis | Low drop-tail percent from MBS that is reduced | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
dynamic-mbs boolean
| Synopsis | Allow MBS size modification to maintain maximum latency | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number dynamic-mbs boolean | |
| Tree | dynamic-mbs | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
hs-alt-port-class-pool boolean
| Synopsis | Use HS alternate class port pool buffer for traffic | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number hs-alt-port-class-pool boolean | |
| Tree | hs-alt-port-class-pool | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Scheduling class weight | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
hs-wred-queue
| Synopsis | Enter the hs-wred-queue context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number hs-wred-queue | |
| Tree | hs-wred-queue | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
| Synopsis | Slope policy name | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number hs-wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
| Synopsis | WRR weight with which queue parents into the scheduler | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number hs-wrr-weight number | |
| Tree | hs-wrr-weight | |
| Range | 1 to 127 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
mbs (number | keyword)
| Synopsis | Buffer space allowed for the queue | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 1073741824 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
packet-byte-offset number
| Synopsis | Packet byte offset for addition of policing information | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 31 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
| Synopsis | Administrative CIR percent | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
pir decimal-number
| Synopsis | Administrative PIR percent | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | All |
reference-rate keyword
| Synopsis | Reference rate | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number percent-rate reference-rate keyword | |
| Tree | reference-rate | |
| Options | ||
| Default | port-limit | |
| Introduced | 20.10.R1 | |
Platforms | All |
port-parent
| Synopsis | Enable the port-parent context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number port-parent | |
| Tree | port-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
| Synopsis | Port priority to receive bandwidth for within-CIR pass | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number port-parent cir-level number | |
| Tree | cir-level | |
| Range | 0 to 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number port-parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
level number
| Synopsis | Port priority for bandwidth for above-CIR offered load | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number port-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
weight number
| Synopsis | Weight used at above-CIR port priority level | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number port-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
queue-delay number
| Synopsis | Target queue delay for forwarding packets through queue | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number queue-delay number | |
| Tree | queue-delay | |
| Range | 1 to 5000 | |
| Units | milliseconds | |
| Introduced | 16.0.R1 | |
Platforms |
All |
queue-type keyword
| Synopsis | Method used to service queue from hardware perspective | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number queue-type keyword | |
| Tree | queue-type | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
| Synopsis | Administrative CIR | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number rate cir (number | keyword) | |
| Tree | cir | |
| Range | 0 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
pir (number | keyword)
| Synopsis | Administrative PIR | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number rate pir (number | keyword) | |
| Tree | pir | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Default | max | |
| Introduced | 16.0.R1 | |
Platforms | All |
scheduler-parent
| Synopsis | Enable the scheduler-parent context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number scheduler-parent | |
| Tree | scheduler-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number scheduler-parent cir-level number | |
| Tree | cir-level | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number scheduler-parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number scheduler-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
scheduler-name named-item
| Synopsis | Parent scheduler name | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number scheduler-parent scheduler-name named-item | |
| Tree | scheduler-name | |
Description | This command associates a scheduler name to a queue. The scheduler name must have previously been defined within an existing scheduler policy and exist on each SAP the queue is created on. There are no checks performed to ensure that the scheduler name exists within an existing scheduler policy. Until the scheduler name exists on the egress SAP, the queue operates in an orphaned state. | |
| String length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
weight number
| Synopsis | Weight used by the scheduler for feeding the queue | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number scheduler-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
wred-queue
| Synopsis | Enter the wred-queue context | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number wred-queue | |
| Tree | wred-queue | |
| Introduced | 16.0.R1 | |
Platforms | All |
mode keyword
| Synopsis | Pool association to allow queue-specific WRED slopes | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number wred-queue mode keyword | |
| Tree | mode | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy reference
| Synopsis | Slope policy name | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | All |
usage keyword
| Synopsis | Congestion control type | |
| Context | configure qos queue-group-templates egress queue-group named-item queue number wred-queue usage keyword | |
| Tree | usage | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
queues-hqos-manageable boolean
| Synopsis | Manage queues through the Hierarchical QoS process | |
| Context | configure qos queue-group-templates egress queue-group named-item queues-hqos-manageable boolean | |
| Tree | queues-hqos-manageable | |
| Default | true | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, VSR |
ingress
| Synopsis | Enter the ingress context | |
| Context | configure qos queue-group-templates ingress | |
| Tree | ingress | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group [ingress-queue-group-name] named-item
| Synopsis | Enter the queue-group list instance | |
| Context | configure qos queue-group-templates ingress queue-group named-item | |
| Tree | queue-group | |
| Introduced | 16.0.R1 | |
Platforms | All |
[ingress-queue-group-name] named-item
| Synopsis | Ingress queue group template name | |
| Context | configure qos queue-group-templates ingress queue-group named-item | |
| Tree | queue-group | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos queue-group-templates ingress queue-group named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
policer [policer-id] number
| Synopsis | Enter the policer list instance | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number | |
| Tree | policer | |
| Introduced | 16.0.R1 | |
Platforms | All |
[policer-id] number
| Synopsis | Ingress Queue-Group Policer identifier | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number | |
| Tree | policer | |
| Range | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
adv-config-policy reference
| Synopsis | Advanced QoS policy name | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number adv-config-policy reference | |
| Tree | adv-config-policy | |
Reference | configure qos adv-config-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | All |
arbiter-parent
| Synopsis | Enter the arbiter-parent context | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number arbiter-parent | |
| Tree | arbiter-parent | |
| Introduced | 16.0.R1 | |
Platforms | All |
arbiter-name named-item
| Synopsis | Arbiter name | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number arbiter-parent arbiter-name named-item | |
| Tree | arbiter-name | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number arbiter-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
weight number
| Synopsis | Weight used by the arbiter for feeding the policer | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number arbiter-parent weight number | |
| Tree | weight | |
| Range | 1 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cbs (number | keyword)
| Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
high-prio-only (number | keyword)
| Synopsis | Percentage of MBS reserved for high priority traffic | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number high-prio-only (number | keyword) | |
| Tree | high-prio-only | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mbs (number | keyword)
| Synopsis | Maximum buffer size for the template queue | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 31 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.2.R1 | |
Platforms | All |
cir decimal-number
| Synopsis | Administrative CIR | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
| Introduced | 20.2.R1 | |
Platforms |
All |
pir decimal-number
| Synopsis | Administrative PIR | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 20.2.R1 | |
Platforms | All |
profile-capped boolean
| Synopsis | Enforce a limit on the profile | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number profile-capped boolean | |
| Tree | profile-capped | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
| Synopsis | Administrative CIR | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number rate cir (number | keyword) | |
| Tree | cir | |
| Range | 0 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms | All |
pir (number | keyword)
| Synopsis | Administrative PIR | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number rate pir (number | keyword) | |
| Tree | pir | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Default | max | |
| Introduced | 16.0.R1 | |
Platforms | All |
stat-mode keyword
| Synopsis | Mode of statistics collected by the policer | |
| Context | configure qos queue-group-templates ingress queue-group named-item policer number stat-mode keyword | |
| Tree | stat-mode | |
| Options | ||
| Default | minimal | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue [queue-id] number
| Synopsis | Enter the queue list instance | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number | |
| Tree | queue | |
| Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
| Synopsis | Ingress Queue-Group Queue identifier | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number | |
| Tree | queue | |
| Range | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
| Synopsis | Constraint for deriving operational CIR for the queue | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fir keyword
| Synopsis | Constraint for deriving operational FIR for the queue | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number adaptation-rule fir keyword | |
| Tree | fir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R2 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
pir keyword
| Synopsis | Constraint for deriving operational FIR for the queue | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
adv-config-policy reference
| Synopsis | Advanced QoS policy name | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number adv-config-policy reference | |
| Tree | adv-config-policy | |
Reference | configure qos adv-config-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | All |
burst-limit (number | keyword)
| Synopsis | Explicit shaping burst size of a queue | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
cbs (number | keyword)
| Synopsis | Reserved buffer space for the queue | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 1048576 | |
| Units | kilobytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cir-non-profiling boolean
| Synopsis | Prevent profile modification of CIR dependent packet | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number cir-non-profiling boolean | |
| Tree | cir-non-profiling | |
Description | When configured to true, the system prevents the modification of the profile of a packet-dependent queue rate compared to its configured CIR. The CIR continues to be used to affect the scheduling priority of a queue. This command is only supported on hardware that is FP4-based and later and is ignored when the related policy is applied to FP3-based hardware. This command should not be configured under an ingress queue group template queue associated with a LAG which spans FP4-based and later and FP3-based hardware as the resulting operation could be different depending on which hardware type the traffic ingresses. | |
| Default | false | |
| Introduced | 16.0.R2 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
drop-tail
| Synopsis | Enter the drop-tail context | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number drop-tail | |
| Tree | drop-tail | |
| Introduced | 16.0.R1 | |
Platforms | All |
low
| Synopsis | Enter the low context | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number drop-tail low | |
| Tree | low | |
| Introduced | 16.0.R1 | |
Platforms | All |
percent-reduction-from-mbs (number | keyword)
| Synopsis | Low drop-tail percent from MBS that is reduced | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mbs (number | keyword)
| Synopsis | Maximum buffer space that is allowed for queue | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 1073741824 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
multipoint boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Create an ingress multipoint queue | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number multipoint boolean | |
| Tree | multipoint | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
packet-byte-offset number
| Synopsis | Packet size modification for queue accounting | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 31 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | All |
cir decimal-number
| Synopsis | Administrative CIR | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
|
Notes | The following elements are part of a choice: (cir and fir) or police. | |
| Introduced | 20.10.R1 | |
Platforms | All |
fir decimal-number
| Synopsis | Administrative FIR | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number percent-rate fir decimal-number | |
| Tree | fir | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
|
Notes | The following elements are part of a choice: (cir and fir) or police. | |
| Introduced | 20.10.R1 | |
Platforms | All |
pir decimal-number
| Synopsis | Administrative PIR | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 20.10.R1 | |
Platforms | All |
police
| Synopsis | Drop out-of-profile traffic feeding into physical queue | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number percent-rate police | |
| Tree | police | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
| Introduced | 20.10.R1 | |
Platforms | All |
reference-rate keyword
| Synopsis | Reference rate | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number percent-rate reference-rate keyword | |
| Tree | reference-rate | |
| Options | ||
| Default | port-limit | |
| Introduced | 20.10.R1 | |
Platforms | All |
queue-mode keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Queue operational mode for explicitly profiled packets | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number queue-mode keyword | |
| Tree | queue-mode | |
| Options | ||
| Default | priority | |
| Introduced | 16.0.R1 | |
Platforms | All | |
queue-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Priority that this queue receives from the hardware level schedulers | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number queue-type keyword | |
| Tree | queue-type | |
| Options | ||
| Default | best-effort | |
| Introduced | 16.0.R1 | |
Platforms | All | |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
| Synopsis | Administrative CIR | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number rate cir (number | keyword) | |
| Tree | cir | |
| Range | 0 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Default | 0 | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fir (number | keyword)
| Synopsis | Administrative FIR | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number rate fir (number | keyword) | |
| Tree | fir | |
| Range | 0 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Default | 0 | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
| Introduced | 16.0.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
pir (number | keyword)
| Synopsis | Administrative PIR | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number rate pir (number | keyword) | |
| Tree | pir | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Default | max | |
| Introduced | 16.0.R1 | |
Platforms | All |
police
| Synopsis | Drop out-of-profile traffic feeding into queue instance | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number rate police | |
| Tree | police | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
| Introduced | 16.0.R1 | |
Platforms | All |
scheduler-parent
| Synopsis | Enter the scheduler-parent context | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number scheduler-parent | |
| Tree | scheduler-parent | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number scheduler-parent cir-level number | |
| Tree | cir-level | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number scheduler-parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number scheduler-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
scheduler-name named-item
| Synopsis | Scheduler name | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number scheduler-parent scheduler-name named-item | |
| Tree | scheduler-name | |
Description | This command associates a scheduler name to a queue. The scheduler name must have previously been defined within an existing scheduler policy and exist on each SAP the queue is created on. There are no checks performed to ensure that the scheduler name exists within an existing scheduler policy. Until the scheduler name exists on the egress SAP, the queue operates in an orphaned state. | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
weight number
| Synopsis | Weight used by the scheduler for feeding the queue | |
| Context | configure qos queue-group-templates ingress queue-group named-item queue number scheduler-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
sap-egress [sap-egress-policy-name] qos-policy-name
| Synopsis | Enter the sap-egress list instance | |
| Context | configure qos sap-egress qos-policy-name | |
| Tree | sap-egress | |
| Introduced | 16.0.R1 | |
Platforms | All |
[sap-egress-policy-name] qos-policy-name
| Synopsis | Policy name | |
| Context | configure qos sap-egress qos-policy-name | |
| Tree | sap-egress | |
| String length | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos sap-egress qos-policy-name description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dot1p [dot1p-value] number
| Synopsis | Enter the dot1p list instance | |
| Context | configure qos sap-egress qos-policy-name dot1p number | |
| Tree | dot1p | |
| Introduced | 16.0.R1 | |
Platforms | All |
[dot1p-value] number
| Synopsis | Dot1p value to match in the packet | |
| Context | configure qos sap-egress qos-policy-name dot1p number | |
| Tree | dot1p | |
| Range | 0 to 7 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
| Synopsis | Forwarding class | |
| Context | configure qos sap-egress qos-policy-name dot1p number fc keyword | |
| Tree | fc | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
profile keyword
| Synopsis | Default profile for the ingressing traffic | |
| Context | configure qos sap-egress qos-policy-name dot1p number profile keyword | |
| Tree | profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | All |
dscp [dscp-name] keyword
| Synopsis | Enter the dscp list instance | |
| Context | configure qos sap-egress qos-policy-name dscp keyword | |
| Tree | dscp | |
| Introduced | 16.0.R1 | |
Platforms | All |
[dscp-name] keyword
| Synopsis | DSCP name to perform reclassification actions | |
| Context | configure qos sap-egress qos-policy-name dscp keyword | |
| Tree | dscp | |
| Options | ||
Notes |
This element is part of a list key. | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fc keyword
| Synopsis | Forwarding class | |
| Context | configure qos sap-egress qos-policy-name dscp keyword fc keyword | |
| Tree | fc | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
profile keyword
| Synopsis | Default profile for the ingressing traffic | |
| Context | configure qos sap-egress qos-policy-name dscp keyword profile keyword | |
| Tree | profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
ethernet-ctag boolean
| Synopsis | Tag value for dot1p and DE (Drop-Eligible) that are used by all dot1-p entries | |
| Context | configure qos sap-egress qos-policy-name ethernet-ctag boolean | |
| Tree | ethernet-ctag | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fc [fc-name] keyword
| Synopsis | Enter the fc list instance | |
| Context | configure qos sap-egress qos-policy-name fc keyword | |
| Tree | fc | |
| Introduced | 16.0.R1 | |
Platforms | All |
[fc-name] keyword
| Synopsis | Forwarding class | |
| Context | configure qos sap-egress qos-policy-name fc keyword | |
| Tree | fc | |
| Options | ||
Notes |
This element is part of a list key. | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
de-mark
| Synopsis | Enable the de-mark context | |
| Context | configure qos sap-egress qos-policy-name fc keyword de-mark | |
| Tree | de-mark | |
| Introduced | 16.0.R1 | |
Platforms | All |
force number
de-mark-inner
| Synopsis | Enable the de-mark-inner context | |
| Context | configure qos sap-egress qos-policy-name fc keyword de-mark-inner | |
| Tree | de-mark-inner | |
| Introduced | 16.0.R1 | |
Platforms | All |
force number
| Synopsis | DE value to set in inner VLAN tag | |
| Context | configure qos sap-egress qos-policy-name fc keyword de-mark-inner force number | |
| Tree | force | |
| Range | 0 to 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
de-mark-outer
| Synopsis | Enable the de-mark-outer context | |
| Context | configure qos sap-egress qos-policy-name fc keyword de-mark-outer | |
| Tree | de-mark-outer | |
| Introduced | 16.0.R1 | |
Platforms | All |
force number
| Synopsis | DE value to set in outer VLAN tag | |
| Context | configure qos sap-egress qos-policy-name fc keyword de-mark-outer force number | |
| Tree | force | |
| Range | 0 to 1 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
dot1p
| Synopsis | Enter the dot1p context | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p | |
| Tree | dot1p | |
| Introduced | 16.0.R1 | |
Platforms | All |
exceed-profile number
| Synopsis | Dot1p value for exceed-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p exceed-profile number | |
| Tree | exceed-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
in-profile number
| Synopsis | Dot1p value for in-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p in-profile number | |
| Tree | in-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
out-profile number
| Synopsis | Dot1p value for out-of-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p out-profile number | |
| Tree | out-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
dot1p-inner
| Synopsis | Enter the dot1p-inner context | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p-inner | |
| Tree | dot1p-inner | |
| Introduced | 16.0.R1 | |
Platforms | All |
exceed-profile number
| Synopsis | Inner Dot1p value for exceed-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p-inner exceed-profile number | |
| Tree | exceed-profile | |
| Range | 0 to 7 | |
| Introduced | 23.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
in-profile number
| Synopsis | Inner Dot1p value for in-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p-inner in-profile number | |
| Tree | in-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
out-profile number
| Synopsis | Inner Dot1p value for out-of-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p-inner out-profile number | |
| Tree | out-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
dot1p-outer
| Synopsis | Enter the dot1p-outer context | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p-outer | |
| Tree | dot1p-outer | |
| Introduced | 16.0.R1 | |
Platforms | All |
exceed-profile number
| Synopsis | Outer Dot1p value for exceed-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p-outer exceed-profile number | |
| Tree | exceed-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
in-profile number
| Synopsis | Outer Dot1p value for in-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p-outer in-profile number | |
| Tree | in-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
out-profile number
| Synopsis | Outer Dot1p value for out-of-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dot1p-outer out-profile number | |
| Tree | out-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
dscp
| Synopsis | Enter the dscp context | |
| Context | configure qos sap-egress qos-policy-name fc keyword dscp | |
| Tree | dscp | |
Notes | The following elements are part of a choice: dscp or prec. | |
| Introduced | 16.0.R1 | |
Platforms | All |
exceed-profile keyword
| Synopsis | DSCP name for exceed-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dscp exceed-profile keyword | |
| Tree | exceed-profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
in-profile keyword
| Synopsis | DSCP name for in-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dscp in-profile keyword | |
| Tree | in-profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
out-profile keyword
| Synopsis | DSCP name for out-of-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword dscp out-profile keyword | |
| Tree | out-profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
policer reference
| Synopsis | Policer to forward the traffic | |
| Context | configure qos sap-egress qos-policy-name fc keyword policer reference | |
| Tree | policer | |
Reference | configure qos sap-egress qos-policy-name policer number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
port-redirect-group-queue
| Synopsis | Enable the port-redirect-group-queue context | |
| Context | configure qos sap-egress qos-policy-name fc keyword port-redirect-group-queue | |
| Tree | port-redirect-group-queue | |
Notes | The following elements are part of a choice: port-redirect-group-queue, queue, or queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue number
| Synopsis | Queue to forward the traffic | |
| Context | configure qos sap-egress qos-policy-name fc keyword port-redirect-group-queue queue number | |
| Tree | queue | |
| Range | 1 to 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
prec
| Synopsis | Enter the prec context | |
| Context | configure qos sap-egress qos-policy-name fc keyword prec | |
| Tree | prec | |
Notes | The following elements are part of a choice: dscp or prec. | |
| Introduced | 16.0.R1 | |
Platforms | All |
exceed-profile number
| Synopsis | Precedence for exceed-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword prec exceed-profile number | |
| Tree | exceed-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
in-profile number
| Synopsis | Precedence value for in-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword prec in-profile number | |
| Tree | in-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
out-profile number
| Synopsis | Precedence value for out-of-profile frames | |
| Context | configure qos sap-egress qos-policy-name fc keyword prec out-profile number | |
| Tree | out-profile | |
| Range | 0 to 7 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue reference
| Synopsis | Queue to forward the traffic | |
| Context | configure qos sap-egress qos-policy-name fc keyword queue reference | |
| Tree | queue | |
Reference | configure qos sap-egress qos-policy-name queue number | |
Notes | The following elements are part of a choice: port-redirect-group-queue, queue, or queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-queue
| Synopsis | Enable the queue-group-queue context | |
| Context | configure qos sap-egress qos-policy-name fc keyword queue-group-queue | |
| Tree | queue-group-queue | |
Notes | The following elements are part of a choice: port-redirect-group-queue, queue, or queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
instance number
| Synopsis | Instance ID | |
| Context | configure qos sap-egress qos-policy-name fc keyword queue-group-queue instance number | |
| Tree | instance | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue reference
| Synopsis | SAP egress queue ID | |
| Context | configure qos sap-egress qos-policy-name fc keyword queue-group-queue queue reference | |
| Tree | queue | |
Reference | configure qos queue-group-templates egress queue-group named-item queue number | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-name reference
| Synopsis | Queue group to forward traffic | |
| Context | configure qos sap-egress qos-policy-name fc keyword queue-group-queue queue-group-name reference | |
| Tree | queue-group-name | |
Reference | configure qos queue-group-templates egress queue-group named-item | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
hs-attachment-policy reference
| Synopsis | HS attachment policy applied | |
| Context | configure qos sap-egress qos-policy-name hs-attachment-policy reference | |
| Tree | hs-attachment-policy | |
Reference | configure qos hs-attachment-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] number
| Synopsis | Enter the hs-wrr-group list instance | |
| Context | configure qos sap-egress qos-policy-name hs-wrr-group number | |
| Tree | hs-wrr-group | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] number
| Synopsis | HS WRR group identifier | |
| Context | configure qos sap-egress qos-policy-name hs-wrr-group number | |
| Tree | hs-wrr-group | |
| Range | 1 to 2 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos sap-egress qos-policy-name hs-wrr-group number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos sap-egress qos-policy-name hs-wrr-group number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Weight of scheduling class | |
| Context | configure qos sap-egress qos-policy-name hs-wrr-group number hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
percent-rate decimal-number
| Synopsis | Administrative PIR percent | |
| Context | configure qos sap-egress qos-policy-name hs-wrr-group number percent-rate decimal-number | |
| Tree | percent-rate | |
| Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
| Synopsis | Administrative PIR | |
| Context | configure qos sap-egress qos-policy-name hs-wrr-group number rate (number | keyword) | |
| Tree | rate | |
| Range | 1 to 2000000000 | |
| Units | kilobps | |
| Options | ||
| Default | max | |
Notes |
The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hw-agg-shaper-queues
| Synopsis | Enter the hw-agg-shaper-queues context | |
| Context | configure qos sap-egress qos-policy-name hw-agg-shaper-queues | |
| Tree | hw-agg-shaper-queues | |
Description | Commands in this context configure the queue resources from which to draw for a given object (for example, a subscriber host or SAP). | |
| Introduced | 23.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
queue-set-size (number | keyword)
| Synopsis | Queue resource allocation for the SAP egress policy | |
| Context | configure qos sap-egress qos-policy-name hw-agg-shaper-queues queue-set-size (number | keyword) | |
| Tree | queue-set-size | |
Description | This command configures the queue-set size or non-shaper-queue to use for this SAP egress policy. | |
| Range | 2 to 8 | |
| Options | ||
| Introduced | 23.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
ip-criteria
| Synopsis | Enter the ip-criteria context | |
| Context | configure qos sap-egress qos-policy-name ip-criteria | |
| Tree | ip-criteria | |
| Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
| Synopsis | Enter the entry list instance | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number | |
| Tree | entry | |
| Introduced | 16.0.R1 | |
Platforms | All |
[entry-id] number
| Synopsis | IP Criteria Entry Index | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number | |
| Tree | entry | |
| Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
action
| Synopsis | Enter the action context | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number action | |
| Tree | action | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
| Synopsis | Forwarding class | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number action fc keyword | |
| Tree | fc | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
policer reference
| Synopsis | Policer identifier for the matched traffic | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number action policer reference | |
| Tree | policer | |
Reference | configure qos sap-egress qos-policy-name policer number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
port-redirect-group-queue boolean
| Synopsis | Use queue specified in egress access port queue group | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number action port-redirect-group-queue boolean | |
| Tree | port-redirect-group-queue | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
profile keyword
| Synopsis | Default profile for the matching traffic | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number action profile keyword | |
| Tree | profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
queue number
| Synopsis | Queue used for matched traffic policed by local policer | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number action queue number | |
| Tree | queue | |
| Range | 1 to 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
type keyword
| Synopsis | Action for criteria entry | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number action type keyword | |
| Tree | type | |
| Options | ||
| Default | ignore-match | |
| Introduced | 16.0.R1 | |
Platforms |
All |
use-fc-mapped-queue boolean
| Synopsis | Redirect policer output to the configured queues | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number action use-fc-mapped-queue boolean | |
| Tree | use-fc-mapped-queue | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
match
| Synopsis | Enter the match context | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match | |
| Tree | match | |
| Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
| Synopsis | DSCP value to match in the packet | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dscp keyword | |
| Tree | dscp | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
dst-ip
| Synopsis | Enter the dst-ip context | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-ip | |
| Tree | dst-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
address (ipv4-prefix-with-host-bits | ipv4-address)
| Synopsis | Destination IPv4 address for SAP QoS policy match | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
| Synopsis | List of IPv4 prefixes for the match criteria | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-ip ip-prefix-list reference | |
| Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask ipv4-address
| Synopsis | IP address mask to match with source IP of the packet | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-ip mask ipv4-address | |
| Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
dst-port
| Synopsis | Enter the dst-port context | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-port | |
| Tree | dst-port | |
| Introduced | 16.0.R1 | |
Platforms | All |
eq number
| Synopsis | Value 'equal to' as match condition | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-port eq number | |
| Tree | eq | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
gt number
| Synopsis | Value 'greater than' as match condition | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Value 'less than' as match condition | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
range
| Synopsis | Enter the range context | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-port range | |
| Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of the port range | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-port range end number | |
| Tree | end | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start number
| Synopsis | Lower bound of the port range | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match dst-port range start number | |
| Tree | start | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fragment keyword
| Synopsis | Fragmented packets as the match criterion | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match fragment keyword | |
| Tree | fragment | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
protocol (number | keyword)
| Synopsis | IP protocol to match | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match protocol (number | keyword) | |
| Tree | protocol | |
| Range | 0 to 255 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
| Synopsis | Enter the src-ip context | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-ip | |
| Tree | src-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
address (ipv4-prefix-with-host-bits | ipv4-address)
| Synopsis | Source IPv4 address for SAP QoS policy match criterion | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
| Synopsis | List of IPv4 prefixes for the match criteria | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-ip ip-prefix-list reference | |
| Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask ipv4-address
| Synopsis | IP address mask to match with source IP of the packet | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-ip mask ipv4-address | |
| Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
src-port
| Synopsis | Enter the src-port context | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-port | |
| Tree | src-port | |
| Introduced | 16.0.R1 | |
Platforms | All |
eq number
| Synopsis | Value 'equal to' as match condition | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-port eq number | |
| Tree | eq | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
gt number
| Synopsis | Value 'greater than' as match condition | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Value 'less than' as match condition | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
range
| Synopsis | Enter the range context | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-port range | |
| Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of the port range | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-port range end number | |
| Tree | end | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start number
| Synopsis | Lower bound of the port range | |
| Context | configure qos sap-egress qos-policy-name ip-criteria entry number match src-port range start number | |
| Tree | start | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
ipv6-criteria
| Synopsis | Enter the ipv6-criteria context | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria | |
| Tree | ipv6-criteria | |
| Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
| Synopsis | Enter the entry list instance | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number | |
| Tree | entry | |
| Introduced | 16.0.R1 | |
Platforms | All |
[entry-id] number
| Synopsis | IP Criteria Entry Index | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number | |
| Tree | entry | |
| Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
action
| Synopsis | Enter the action context | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number action | |
| Tree | action | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
| Synopsis | Forwarding class | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number action fc keyword | |
| Tree | fc | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
policer reference
| Synopsis | Policer identifier for the matched traffic | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number action policer reference | |
| Tree | policer | |
Reference | configure qos sap-egress qos-policy-name policer number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
port-redirect-group-queue boolean
| Synopsis | Use queue specified in egress access port queue group | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number action port-redirect-group-queue boolean | |
| Tree | port-redirect-group-queue | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
profile keyword
| Synopsis | Default profile for the matching traffic | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number action profile keyword | |
| Tree | profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
queue number
| Synopsis | Queue used for matched traffic policed by local policer | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number action queue number | |
| Tree | queue | |
| Range | 1 to 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
type keyword
| Synopsis | Action for criteria entry | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number action type keyword | |
| Tree | type | |
| Options | ||
| Default | ignore-match | |
| Introduced | 16.0.R1 | |
Platforms |
All |
use-fc-mapped-queue boolean
| Synopsis | Redirect policer output to the configured queues | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number action use-fc-mapped-queue boolean | |
| Tree | use-fc-mapped-queue | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
match
| Synopsis | Enter the match context | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match | |
| Tree | match | |
| Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
| Synopsis | DSCP value to match in the packet | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dscp keyword | |
| Tree | dscp | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
dst-ip
| Synopsis | Enter the dst-ip context | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-ip | |
| Tree | dst-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
address (ipv6-prefix-with-host-bits | ipv6-address)
| Synopsis | Destination IPv6 address for SAP QoS policy match | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
| Synopsis | IPv6 prefix list as match criterion for IPv6 addresses | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-ip ipv6-prefix-list reference | |
| Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask ipv6-address
| Synopsis | IP address mask to match with destination IP of packet | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-ip mask ipv6-address | |
| Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
dst-port
| Synopsis | Enter the dst-port context | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-port | |
| Tree | dst-port | |
| Introduced | 16.0.R1 | |
Platforms | All |
eq number
| Synopsis | Value 'equal to' as match condition | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-port eq number | |
| Tree | eq | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
gt number
| Synopsis | Value 'greater than' as match condition | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Value 'less than' as match condition | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
range
| Synopsis | Enter the range context | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-port range | |
| Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of the port range | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-port range end number | |
| Tree | end | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start number
| Synopsis | Lower bound of the port range | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match dst-port range start number | |
| Tree | start | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
next-header (number | keyword)
| Synopsis | IP protocol to match | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match next-header (number | keyword) | |
| Tree | next-header | |
| Range | 0 to 255 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
| Synopsis | Enter the src-ip context | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-ip | |
| Tree | src-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
address (ipv6-prefix-with-host-bits | ipv6-address)
| Synopsis | Source IPv6 address for SAP QoS policy match | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
| Synopsis | IPv6 prefix list as match criterion for IPv6 addresses | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-ip ipv6-prefix-list reference | |
| Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask ipv6-address
| Synopsis | IP address mask to match with source IP of the packet | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-ip mask ipv6-address | |
| Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
src-port
| Synopsis | Enter the src-port context | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-port | |
| Tree | src-port | |
| Introduced | 16.0.R1 | |
Platforms | All |
eq number
| Synopsis | Value 'equal to' as match condition | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-port eq number | |
| Tree | eq | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
gt number
| Synopsis | Value 'greater than' as match condition | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Value 'less than' as match condition | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
range
| Synopsis | Enter the range context | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-port range | |
| Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of the port range | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-port range end number | |
| Tree | end | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start number
| Synopsis | Lower bound of the port range | |
| Context | configure qos sap-egress qos-policy-name ipv6-criteria entry number match src-port range start number | |
| Tree | start | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
parent-location keyword
| Synopsis | Location where queues look to find parent scheduler | |
| Context | configure qos sap-egress qos-policy-name parent-location keyword | |
| Tree | parent-location | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
policer [policer-id] number
| Synopsis | Enter the policer list instance | |
| Context | configure qos sap-egress qos-policy-name policer number | |
| Tree | policer | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[policer-id] number
| Synopsis | SAP egress policer ID | |
| Context | configure qos sap-egress qos-policy-name policer number | |
| Tree | policer | |
| Range | 1 to 63 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos sap-egress qos-policy-name policer number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure qos sap-egress qos-policy-name policer number adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos sap-egress qos-policy-name policer number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adv-config-policy reference
| Synopsis | Advanced QoS policy name | |
| Context | configure qos sap-egress qos-policy-name policer number adv-config-policy reference | |
| Tree | adv-config-policy | |
Reference | configure qos adv-config-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-parent
| Synopsis | Enter the arbiter-parent context | |
| Context | configure qos sap-egress qos-policy-name policer number arbiter-parent | |
| Tree | arbiter-parent | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-name named-item
| Synopsis | Arbiter name | |
| Context | configure qos sap-egress qos-policy-name policer number arbiter-parent arbiter-name named-item | |
| Tree | arbiter-name | |
Description | This command specifies an arbiter name. The policer is intended to become a child to one of the tiered arbiters with the specified arbiter name where an instance of the policer is created. If the specified arbiter name does not exist, the policer is placed in the orphan state. | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos sap-egress qos-policy-name policer number arbiter-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
| Synopsis | Weight used by the arbiter for feeding the policer | |
| Context | configure qos sap-egress qos-policy-name policer number arbiter-parent weight number | |
| Tree | weight | |
| Range | 1 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
| Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
| Context | configure qos sap-egress qos-policy-name policer number cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description description
| Synopsis | Text description | |
| Context | configure qos sap-egress qos-policy-name policer number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
dscp-prec-remarking boolean
| Synopsis | Remark DSCP/precedence based on packet profile state | |
| Context | configure qos sap-egress qos-policy-name policer number dscp-prec-remarking boolean | |
| Tree | dscp-prec-remarking | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
exceed-pir boolean
| Synopsis | Forward packets exceeding the PIR as exceed-profile | |
| Context | configure qos sap-egress qos-policy-name policer number exceed-pir boolean | |
| Tree | exceed-pir | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
high-prio-only (number | keyword)
| Synopsis | Percentage of MBS reserved for high priority traffic | |
| Context | configure qos sap-egress qos-policy-name policer number high-prio-only (number | keyword) | |
| Tree | high-prio-only | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs (number | keyword)
| Synopsis | Maximum burst tolerance allowed by the policer | |
| Context | configure qos sap-egress qos-policy-name policer number mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure qos sap-egress qos-policy-name policer number packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 31 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos sap-egress qos-policy-name policer number percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
| Synopsis | Administrative CIR percent | |
| Context | configure qos sap-egress qos-policy-name policer number percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir decimal-number
| Synopsis | Administrative PIR percent | |
| Context | configure qos sap-egress qos-policy-name policer number percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
reference-rate keyword
| Synopsis | Reference rate | |
| Context | configure qos sap-egress qos-policy-name policer number percent-rate reference-rate keyword | |
| Tree | reference-rate | |
| Options | ||
| Default | local-limit | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
port-parent
| Synopsis | Enable the port-parent context | |
| Context | configure qos sap-egress qos-policy-name policer number port-parent | |
| Tree | port-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir-level number
| Synopsis | Port priority level for within-CIR offered load | |
| Context | configure qos sap-egress qos-policy-name policer number port-parent cir-level number | |
| Tree | cir-level | |
Description | This command defines the port priority that the policer uses to receive bandwidth for its within-CIR offered load. If this command is set to the default value, the policer does not receive bandwidth during the port schedulers with-CIR pass and the cir-weight command is ignored. | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir-weight number
| Synopsis | Weight to use in the within-CIR port priority level | |
| Context | configure qos sap-egress qos-policy-name policer number port-parent cir-weight number | |
| Tree | cir-weight | |
Description | This command defines the weight that the policer uses at the within-CIR port priority level. All CIR weight values from all weighted active policers, queues, and schedulers with a common port parent are added together. Each individual active weight is then divided by the total to determine the percentage of remaining bandwidth provided to the policer, queue, or scheduler after the higher priority level children have been serviced. A weight is considered active when the applicable policer, queue, or scheduler has not reached its maximum rate and still has packets to transmit. When this command is set to the default value, the policer receives bandwidth only after other children with a non-zero weight at this level have been serviced. | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
| Synopsis | Port priority level for above-CIR behavior | |
| Context | configure qos sap-egress qos-policy-name policer number port-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
| Synopsis | Weight to use in the above-CIR port priority level | |
| Context | configure qos sap-egress qos-policy-name policer number port-parent weight number | |
| Tree | weight | |
Description | This command defines the weight that the policer uses at the above-CIR port priority level. All weight values from all weighted active policers, queues, and schedulers with a common port parent are added together. Each individual active weight is then divided by the total to determine the percentage of remaining bandwidth provided to the policer, queue, or scheduler after the higher priority level children have been serviced. A weight is considered to be active when the applicable policer, queue, or scheduler has not reached its maximum rate and still has packets to transmit. When this command is set to a value of 0, the policer receives bandwidth only after other children with a non-zero weight at this level. | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile-capped boolean
| Synopsis | Enforce overall in-profile burst limit to CIR bucket | |
| Context | configure qos sap-egress qos-policy-name policer number profile-capped boolean | |
| Tree | profile-capped | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile-out-preserve boolean
| Synopsis | Preserve the color of offered out-of-profile traffic | |
| Context | configure qos sap-egress qos-policy-name policer number profile-out-preserve boolean | |
| Tree | profile-out-preserve | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos sap-egress qos-policy-name policer number rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
pir (number | keyword)
scheduler-parent
| Synopsis | Enable the scheduler-parent context | |
| Context | configure qos sap-egress qos-policy-name policer number scheduler-parent | |
| Tree | scheduler-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir-level number
| Synopsis | Port priority level for within-CIR offered load | |
| Context | configure qos sap-egress qos-policy-name policer number scheduler-parent cir-level number | |
| Tree | cir-level | |
Description | This command defines the hierarchy priority level when compared with other policers, queues, and schedulers that the policer uses to receive bandwidth for its within-CIR offered load. If this command is set to the default value, the policer does not receive bandwidth during the schedulers within-CIR pass and the cir-weight command is ignored. | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir-weight number
| Synopsis | Weight to use in the within-CIR port priority level | |
| Context | configure qos sap-egress qos-policy-name policer number scheduler-parent cir-weight number | |
| Tree | cir-weight | |
Description | The command defines the relative weight of the policer in comparison with other child policers, queues, or schedulers competing for bandwidth on the parent scheduler name at the within-CIR priority level. A weight is considered to be active when the applicable policer, queue, or scheduler has not reached its maximum rate and still has packets to transmit. When this command is set to a value of 0, the policer receives bandwidth only after the other children with a non-zero weight at this level have been serviced. | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
| Synopsis | Priority level for bandwidth on the parent scheduler | |
| Context | configure qos sap-egress qos-policy-name policer number scheduler-parent level number | |
| Tree | level | |
Description | This command defines the priority level when compared with other policers, queues, and schedulers when competing for bandwidth on the parent scheduler. Children of the parent scheduler with a lower priority do not receive bandwidth until all children with a higher priority have either reached their maximum bandwidth or are idle. Children with the same level are serviced in relation to their relative weights. | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
scheduler-name named-item
| Synopsis | Scheduler name | |
| Context | configure qos sap-egress qos-policy-name policer number scheduler-parent scheduler-name named-item | |
| Tree | scheduler-name | |
| String length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
| Synopsis | Policer weight at the above-CIR priority level | |
| Context | configure qos sap-egress qos-policy-name policer number scheduler-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
stat-mode keyword
| Synopsis | Mode of statistics collected by the policer | |
| Context | configure qos sap-egress qos-policy-name policer number stat-mode keyword | |
| Tree | stat-mode | |
| Options | ||
| Default | minimal | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policers-hqos-manageable boolean
| Synopsis | Manage policers through the Hierarchical QoS process | |
| Context | configure qos sap-egress qos-policy-name policers-hqos-manageable boolean | |
| Tree | policers-hqos-manageable | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, VSR |
policy-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Egress SAP QoS policy ID | |
| Context | configure qos sap-egress qos-policy-name policy-id number | |
| Tree | policy-id | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
post-policer-mapping reference
| Synopsis | Post policer mapping policy applied to this policy | |
| Context | configure qos sap-egress qos-policy-name post-policer-mapping reference | |
| Tree | post-policer-mapping | |
Reference | configure qos post-policer-mapping named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
prec [prec-value] number
| Synopsis | Enter the prec list instance | |
| Context | configure qos sap-egress qos-policy-name prec number | |
| Tree | prec | |
| Introduced | 16.0.R1 | |
Platforms | All |
[prec-value] number
| Synopsis | Precedence value for which mapping is performed | |
| Context | configure qos sap-egress qos-policy-name prec number | |
| Tree | prec | |
| Range | 0 to 7 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
| Synopsis | Forwarding class | |
| Context | configure qos sap-egress qos-policy-name prec number fc keyword | |
| Tree | fc | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
profile keyword
| Synopsis | Default profile for the ingressing traffic | |
| Context | configure qos sap-egress qos-policy-name prec number profile keyword | |
| Tree | profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
queue [queue-id] number
| Synopsis | Enter the queue list instance | |
| Context | configure qos sap-egress qos-policy-name queue number | |
| Tree | queue | |
| Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
| Synopsis | Egress Queue-Group queue identifier | |
| Context | configure qos sap-egress qos-policy-name queue number | |
| Tree | queue | |
| Range | 1 to 8 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos sap-egress qos-policy-name queue number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure qos sap-egress qos-policy-name queue number adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos sap-egress qos-policy-name queue number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
adv-config-policy reference
| Synopsis | Name of the advanced configuration policy | |
| Context | configure qos sap-egress qos-policy-name queue number adv-config-policy reference | |
| Tree | adv-config-policy | |
Reference | configure qos adv-config-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | All |
agg-shaper-weight number
| Synopsis | Aggregate shaper weight of the sap-egress queue | |
| Context | configure qos sap-egress qos-policy-name queue number agg-shaper-weight number | |
| Tree | agg-shaper-weight | |
| Range | 1 to 100 | |
| Default | 1 | |
| Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
avg-frame-overhead decimal-number
| Synopsis | Average packet-to-frame encapsulation overhead | |
| Context | configure qos sap-egress qos-policy-name queue number avg-frame-overhead decimal-number | |
| Tree | avg-frame-overhead | |
Description | This command configures the average frame overhead, expressed as a percentage, at which the offered load expands on the physical medium (wire) at egress. This is important for accurate "on-the-wire" rate calculations at various levels of H-QoS that do not inherently account for the physical medium characteristics. For example, without considering this overhead, a port-scheduler in H-QoS might inaccurately estimate the available bandwidth on the wire, potentially leading to congestion issues and unexpected packet loss. The rates impacted by the average frame overhead encompass the rates set on port-schedulers and aggregate rate limits for subscribers and Vports. This impact is evident in the configured values, which represent on-the-wire (OTW) rates. Queue configured rates, however, remain unaffected by this adjustment and continue to reflect Layer 2 rates. Configure the average frame overhead in networks with physical mediums that have constant sizes of transmission units (packets or cells) or in scenarios where the average packet size is known. The average frame overhead only affects rate and weight calculations and does not impact collected statistics for accounting purposes. For Ethernet ports, the effect of this command depends on the setting of the avg-frame-overhead-mode command in advanced QoS configuration policy associated with the queue. If the avg-frame-overhead-mode is set to auto, the packet encapsulation overhead calculation is based on a fixed 20 bytes (7 bytes for preamble, 1 byte for start of frame delimiter and 12 bytes for Inter-Frame Gap) that Ethernet medium adds to every packet during transmission. In other words, the configured rates for port-scheduler and aggregate rate limits for subscribers and Vports represent OTW rates. | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
burst-limit (number | keyword)
| Synopsis | Explicit shaping burst size of a queue | |
| Context | configure qos sap-egress qos-policy-name queue number burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
Notes |
The following elements are part of a choice: burst-limit or burst-limit-delay-time. | |
| Introduced | 16.0.R1 | |
Platforms | All |
burst-limit-delay-time number
| Synopsis | Burst limit as a function of time delay | |
| Context | configure qos sap-egress qos-policy-name queue number burst-limit-delay-time number | |
| Tree | burst-limit-delay-time | |
Description | This command configures the burst time as a function of the expected delay. The system automatically translates this configuration into kilobytes based on the administrative rate of the queue parent (for example, the scheduler or aggregate-shaper). The actual operational values of CBS and MBS are shown in kilobytes, and not as a percentage of the delay. | |
| Range | 0 to 100000 | |
| Units | microseconds | |
|
Notes | The following elements are part of a choice: burst-limit or burst-limit-delay-time. | |
| Introduced | 24.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cbs (number | keyword)
| Synopsis | Reserved buffer space for the queue | |
| Context | configure qos sap-egress qos-policy-name queue number cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 1048576 | |
| Units | kilobytes | |
| Options | ||
| Default | auto | |
Notes | The following elements are part of a choice: cbs, cbs-delay-percent, or cbs-delay-time. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cbs-delay-percent decimal-number
| Synopsis | CBS as a portion of SAP latency budget | |
| Context | configure qos sap-egress qos-policy-name queue number cbs-delay-percent decimal-number | |
| Tree | cbs-delay-percent | |
| Range | 0.00 to 100.00 | |
| Units | percent | |
|
Notes | The following elements are part of a choice: cbs, cbs-delay-percent, or cbs-delay-time. | |
| Introduced | 24.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
cbs-delay-time number
| Synopsis | CBS as a function of time delay | |
| Context | configure qos sap-egress qos-policy-name queue number cbs-delay-time number | |
| Tree | cbs-delay-time | |
Description | This command configures the CBS as a function of the expected delay. The system automatically translates this configuration into kilobytes based on the administrative rate of the queue parent (for example, the scheduler or aggregate-shaper). The actual operational values of CBS and MBS are shown in kilobytes, and not as a percentage of the delay. | |
| Range | 0 to 100000 | |
| Units | microseconds | |
|
Notes | The following elements are part of a choice: cbs, cbs-delay-percent, or cbs-delay-time. | |
| Introduced | 24.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
drop-tail
| Synopsis | Enter the drop-tail context | |
| Context | configure qos sap-egress qos-policy-name queue number drop-tail | |
| Tree | drop-tail | |
| Introduced | 16.0.R1 | |
Platforms | All |
exceed
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure qos sap-egress qos-policy-name queue number drop-tail exceed percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
high
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure qos sap-egress qos-policy-name queue number drop-tail high percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
highplus
percent-reduction-from-mbs (number | keyword)
| Synopsis | Percentage reduction from the MBS for a queue drop tail | |
| Context | configure qos sap-egress qos-policy-name queue number drop-tail highplus percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Low drop-tail percent from MBS that is reduced | |
| Context | configure qos sap-egress qos-policy-name queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fir-burst-limit (number | keyword)
| Synopsis | Burst limit for FIR | |
| Context | configure qos sap-egress qos-policy-name queue number fir-burst-limit (number | keyword) | |
| Tree | fir-burst-limit | |
Description | This command configures a burst limit for the FIR of the specified queue. If the keyword auto is used, the FIR burst limit is based on the PIR. In this case, it is recommended to use the explicit PIR value in the queue configuration. | |
| Range | 1 to 102400 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
hs-alt-port-class-pool boolean
| Synopsis | Use HS alternate class port pool buffer for traffic | |
| Context | configure qos sap-egress qos-policy-name queue number hs-alt-port-class-pool boolean | |
| Tree | hs-alt-port-class-pool | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
| Synopsis | Scheduling class weight | |
| Context | configure qos sap-egress qos-policy-name queue number hs-class-weight number | |
| Tree | hs-class-weight | |
| Range | 1 | 2 | 4 | 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
hs-wred-queue
| Synopsis | Enter the hs-wred-queue context | |
| Context | configure qos sap-egress qos-policy-name queue number hs-wred-queue | |
| Tree | hs-wred-queue | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
| Synopsis | Slope policy name | |
| Context | configure qos sap-egress qos-policy-name queue number hs-wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
| Synopsis | WRR weight with which queue parents into the scheduler | |
| Context | configure qos sap-egress qos-policy-name queue number hs-wrr-weight number | |
| Tree | hs-wrr-weight | |
| Range | 1 to 127 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
maximum-data-transmission (number | keyword)
| Synopsis | Maximum data transmitted at each scheduling opportunity | |
| Context | configure qos sap-egress qos-policy-name queue number maximum-data-transmission (number | keyword) | |
| Tree | maximum-data-transmission | |
Description | This command sets the maximum amount of data transmitted at a single scheduling opportunity. If the frame to be scheduled is longer than the configured amount of data, the entire frame is still transmitted. This command is applicable only to FP4 and FP5 chipsets. | |
| Range | 512 to 32768 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 23.3.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
mbs (number | keyword)
| Synopsis | Buffer space allowed for the queue | |
| Context | configure qos sap-egress qos-policy-name queue number mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 1073741824 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
Notes |
The following elements are part of a choice: mbs, mbs-delay-percent, or mbs-delay-time. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mbs-delay-percent decimal-number
| Synopsis | MBS as a portion of SAP latency budget | |
| Context | configure qos sap-egress qos-policy-name queue number mbs-delay-percent decimal-number | |
| Tree | mbs-delay-percent | |
| Range | 0.00 to 100.00 | |
| Units | percent | |
|
Notes | The following elements are part of a choice: mbs, mbs-delay-percent, or mbs-delay-time. | |
| Introduced | 24.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mbs-delay-time number
| Synopsis | MBS as a function of time delay | |
| Context | configure qos sap-egress qos-policy-name queue number mbs-delay-time number | |
| Tree | mbs-delay-time | |
Description | This command configures the MBS as a function of the expected delay. The system automatically translates this configuration into kilobytes based on the administrative rate of the queue parent (for example, the scheduler or aggregate-shaper). The actual operational values of CBS and MBS are shown in kilobytes, and not as a percentage of the delay. | |
| Range | 0 to 100000 | |
| Units | microseconds | |
|
Notes | The following elements are part of a choice: mbs, mbs-delay-percent, or mbs-delay-time. | |
| Introduced | 24.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
packet-byte-offset number
| Synopsis | Packet byte offset for addition of policing information | |
| Context | configure qos sap-egress qos-policy-name queue number packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 32 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos sap-egress qos-policy-name queue number percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
| Synopsis | Administrative CIR percent | |
| Context | configure qos sap-egress qos-policy-name queue number percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
pir decimal-number
| Synopsis | Administrative PIR percent | |
| Context | configure qos sap-egress qos-policy-name queue number percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | All |
reference-rate keyword
| Synopsis | Reference rate | |
| Context | configure qos sap-egress qos-policy-name queue number percent-rate reference-rate keyword | |
| Tree | reference-rate | |
| Options | ||
| Default | port-limit | |
| Introduced | 16.0.R1 | |
Platforms | All |
port-parent
| Synopsis | Enable the port-parent context | |
| Context | configure qos sap-egress qos-policy-name queue number port-parent | |
| Tree | port-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
| Synopsis | Port priority to receive bandwidth for within-CIR pass | |
| Context | configure qos sap-egress qos-policy-name queue number port-parent cir-level number | |
| Tree | cir-level | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure qos sap-egress qos-policy-name queue number port-parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
level number
| Synopsis | Port priority for bandwidth for above-CIR offered load | |
| Context | configure qos sap-egress qos-policy-name queue number port-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
weight number
| Synopsis | Weight used at above-CIR port priority level | |
| Context | configure qos sap-egress qos-policy-name queue number port-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
queue-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Method used to service queue from hardware perspective | |
| Context | configure qos sap-egress qos-policy-name queue number queue-type keyword | |
| Tree | queue-type | |
| Options | ||
| Default | auto-expedited | |
| Introduced | 16.0.R1 | |
Platforms | All | |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos sap-egress qos-policy-name queue number rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
pir (number | keyword)
sched-class (number | keyword)
| Synopsis | Scheduler class for the sap-egress queue | |
| Context | configure qos sap-egress qos-policy-name queue number sched-class (number | keyword) | |
| Tree | sched-class | |
Description | This command configures a scheduling class for the specified queue. If the keyword auto is used, the scheduling class mapping is done automatically. | |
| Range | 1 to 6 | |
| Options | ||
| Default | auto | |
| Introduced | 21.7.R1 | |
|
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
scheduler-parent
| Synopsis | Enable the scheduler-parent context | |
| Context | configure qos sap-egress qos-policy-name queue number scheduler-parent | |
| Tree | scheduler-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos sap-egress qos-policy-name queue number scheduler-parent cir-level number | |
| Tree | cir-level | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure qos sap-egress qos-policy-name queue number scheduler-parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos sap-egress qos-policy-name queue number scheduler-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
scheduler-name named-item
| Synopsis | Parent scheduler name | |
| Context | configure qos sap-egress qos-policy-name queue number scheduler-parent scheduler-name named-item | |
| Tree | scheduler-name | |
Description | This command associates a scheduler name to a queue. The scheduler name must have previously been defined within an existing scheduler policy and exist on each SAP the queue is created on. There are no checks performed to ensure that the scheduler name exists within an existing scheduler policy. Until the scheduler name exists on the egress SAP, the queue operates in an orphaned state. | |
| String length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
weight number
| Synopsis | Weight used by the scheduler for feeding the queue | |
| Context | configure qos sap-egress qos-policy-name queue number scheduler-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
wred-queue
| Synopsis | Enter the wred-queue context | |
| Context | configure qos sap-egress qos-policy-name queue number wred-queue | |
| Tree | wred-queue | |
| Introduced | 16.0.R1 | |
Platforms | All |
mode keyword
| Synopsis | Pool association to allow queue-specific WRED slopes | |
| Context | configure qos sap-egress qos-policy-name queue number wred-queue mode keyword | |
| Tree | mode | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
policy reference
| Synopsis | Slope policy name | |
| Context | configure qos sap-egress qos-policy-name queue number wred-queue policy reference | |
| Tree | policy | |
Reference | configure qos slope-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | All |
usage keyword
| Synopsis | Congestion control type | |
| Context | configure qos sap-egress qos-policy-name queue number wred-queue usage keyword | |
| Tree | usage | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
sched-class-elevation
| Synopsis | Enter the sched-class-elevation context | |
| Context | configure qos sap-egress qos-policy-name sched-class-elevation | |
| Tree | sched-class-elevation | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
sched-class [class-id] number
| Synopsis | Enter the sched-class list instance | |
| Context | configure qos sap-egress qos-policy-name sched-class-elevation sched-class number | |
| Tree | sched-class | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
[class-id] number
| Synopsis | Scheduling class associated with this SAP egress | |
| Context | configure qos sap-egress qos-policy-name sched-class-elevation sched-class number | |
| Tree | sched-class | |
| Range | 1 to 6 | |
Notes | This element is part of a list key. | |
| Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
weight number
| Synopsis | Weight of the schedule class | |
| Context | configure qos sap-egress qos-policy-name sched-class-elevation sched-class number weight number | |
| Tree | weight | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-1 (FP5), 7750 SR-s |
scope keyword
| Synopsis | Scope of the policy | |
| Context | configure qos sap-egress qos-policy-name scope keyword | |
| Tree | scope | |
| Options | ||
| Default | template | |
| Introduced | 16.0.R1 | |
Platforms | All |
subscriber-mgmt
| Synopsis | Enter the subscriber-mgmt context | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt | |
| Tree | subscriber-mgmt | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dynamic-policer
| Synopsis | Enter the dynamic-policer context | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer | |
| Tree | dynamic-policer | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arbiter-parent
| Synopsis | Enter the arbiter-parent context | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer arbiter-parent | |
| Tree | arbiter-parent | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arbiter-name named-item
| Synopsis | Arbiter name | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer arbiter-parent arbiter-name named-item | |
| Tree | arbiter-name | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer arbiter-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
weight number
| Synopsis | Weight to be used by the arbiter for feeding this policer | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer arbiter-parent weight number | |
| Tree | weight | |
| Range | 1 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cbs (number | keyword)
| Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mbs (number | keyword)
| Synopsis | High priority 'violate' threshold of PIR leaky bucket of this policer | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -64 to 31 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policer-id-range
| Synopsis | Enable the policer-id-range context | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer policer-id-range | |
| Tree | policer-id-range | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end number
| Synopsis | Upper bound of the dynamic policer ID range | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer policer-id-range end number | |
| Tree | end | |
| Range | 1 to 63 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start number
| Synopsis | Lower bound of the dynamic policer ID range | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer policer-id-range start number | |
| Tree | start | |
| Range | 1 to 63 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
stat-mode keyword
| Synopsis | Mode of statistics collected by the policer | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-policer stat-mode keyword | |
| Tree | stat-mode | |
| Options | ||
| Default | minimal | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dynamic-queue
| Synopsis | Enter the dynamic-queue context | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue | |
| Tree | dynamic-queue | |
Description | Commands in this context configure dynamically-created queues for subscriber-management applications such as 5G FWA sessions. The configuration options in this context are the same as for static queues configured in the configure qos sap-egress queue context, but are automatically applied to dynamically-created queues. See the 7750 SR and VSR BNG CUPS User Plane Function Guide, "PCC rules based QoS" for more information about Dynamic QoS based on PCC rules for FWA sessions. See the 7450 ESS, 7750 SR, 7950 XRS, and VSR Quality of Service Guide for general information about configuring QoS. | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cbs (number | keyword)
| Synopsis | Committed buffer space reserved for the queue | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue cbs (number | keyword) | |
| Tree | cbs | |
Description | This command configures the committed buffer space (CBS) that is reserved for the queue. The CBS is applied to each dynamic queue and is not shared. | |
| Range | 0 to 1048576 | |
| Units | kilobytes | |
| Options | ||
| Default | auto | |
| Introduced | 23.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mbs (number | keyword)
| Synopsis | Maximum buffer space allowed for the queue | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue mbs (number | keyword) | |
| Tree | mbs | |
Description | This command configures the maximum buffer space (MBS) allowed for the queue. The MBS is applied to each dynamic queue and is not shared. | |
| Range | 0 to 1073741824 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
packet-byte-offset number
| Synopsis | Packet byte offset used to modify the input packet size | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue packet-byte-offset number | |
| Tree | packet-byte-offset | |
Description | This command configures the packet-byte offset the system uses to modify the size of the input packets. This also applies to any charging statistics. | |
| Range | -64 to 31 | |
| Default | 0 | |
| Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
port-parent
| Synopsis | Enable the port-parent context | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue port-parent | |
| Tree | port-parent | |
Description | Commands in this context configure the queue treatment by the port parent, that governs the available bandwidth for the queue. They define how this queue contends with the other children for the parent bandwidth. See the 7750 SR and VSR BNG CUPS User Plane Function Guide, "PCC rules based QoS" for more information about Dynamic QoS based on PCC rules for FWA sessions. See the 7450 ESS, 7750 SR, 7950 XRS, and VSR Quality of Service Guide for general information about configuring QoS. | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cir-level number
| Synopsis | Port priority for within-CIR passes | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue port-parent cir-level number | |
| Tree | cir-level | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cir-weight number
| Synopsis | Weight used for the within-CIR port-priority level | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue port-parent cir-weight number | |
| Tree | cir-weight | |
Description | This command configures the weight the queue uses to receive bandwidth at the within-CIR port priority level. This also applies to any charging statistics. | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
level number
| Synopsis | Port priority level for above-CIR offered load | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue port-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
weight number
| Synopsis | Weight used for the above-CIR port-priority level | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue port-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
queue-id-range
| Synopsis | Enable the queue-id-range context | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue queue-id-range | |
| Tree | queue-id-range | |
Description | Commands in this context configure the range of IDs from which dynamic queues are allocated. You cannot use these IDs for static queues within the same policy. See the 7750 SR and VSR BNG CUPS User Plane Function Guide, "PCC rules based QoS" for more information about Dynamic QoS based on PCC rules for FWA sessions. See the 7450 ESS, 7750 SR, 7950 XRS, and VSR Quality of Service Guide for general information about configuring QoS. | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end number
| Synopsis | Upper bound of the dynamic queue range | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue queue-id-range end number | |
| Tree | end | |
| Range | 1 to 8 | |
Notes | This element is mandatory. | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start number
| Synopsis | Lower bound of dynamic queue range | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue queue-id-range start number | |
| Tree | start | |
| Range | 1 to 8 | |
Notes | This element is mandatory. | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
scheduler-parent
| Synopsis | Enable the scheduler-parent context | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue scheduler-parent | |
| Tree | scheduler-parent | |
Description | Commands in this context configure the queue treatment by the parent scheduler that governs the available bandwidth for the queue. They define how this queue contends with the other children for the parent bandwidth. See the 7750 SR and VSR BNG CUPS User Plane Function Guide, "PCC rules based QoS" for more information about Dynamic QoS based on PCC rules for FWA sessions. See the 7450 ESS, 7750 SR, 7950 XRS, and VSR Quality of Service Guide for general information about configuring QoS. | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cir-level number
| Synopsis | Priority for feeding the parent for within-CIR passes | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue scheduler-parent cir-level number | |
| Tree | cir-level | |
Description | This command configures the priority level the system uses to feed to the parent for within-CIR passes. | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cir-weight number
| Synopsis | Weight used for the within-CIR port-priority level | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue scheduler-parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
level number
| Synopsis | Priority level for the above-CIR offered load | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue scheduler-parent level number | |
| Tree | level | |
Description | This command configures the priority level of the queue (as compared to other competing schedulers and queues) for the above-CIR offered load bandwidth, when feeding the parent scheduler. | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
scheduler-name named-item
| Synopsis | Name of the parent scheduler | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue scheduler-parent scheduler-name named-item | |
| Tree | scheduler-name | |
| String length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
weight number
| Synopsis | Weight used for the above-CIR port priority level | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt dynamic-queue scheduler-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pcc-rule-entry
| Synopsis | Enter the pcc-rule-entry context | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt pcc-rule-entry | |
| Tree | pcc-rule-entry | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
range
| Synopsis | Enable the range context | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt pcc-rule-entry range | |
| Tree | range | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end number
| Synopsis | Upper bound of the filter and QoS policy entries range | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt pcc-rule-entry range end number | |
| Tree | end | |
| Range | 1 to 65535 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start number
| Synopsis | Lower bound of the filter and QoS policy entries range | |
| Context | configure qos sap-egress qos-policy-name subscriber-mgmt pcc-rule-entry range start number | |
| Tree | start | |
| Range | 1 to 65535 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-policer-result-marking-dot1p-inner boolean
| Synopsis | Enable using egress policer for Dot1p inner marking | |
| Context | configure qos sap-egress qos-policy-name use-policer-result-marking-dot1p-inner boolean | |
| Tree | use-policer-result-marking-dot1p-inner | |
Description | When configured, this command enables using the egress policer profile result to mark dot1p-inner bits. | |
| Default | false | |
| Introduced | 23.7.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
sap-ingress [sap-ingress-policy-name] qos-policy-name
| Synopsis | Enter the sap-ingress list instance | |
| Context | configure qos sap-ingress qos-policy-name | |
| Tree | sap-ingress | |
| Introduced | 16.0.R1 | |
Platforms | All |
[sap-ingress-policy-name] qos-policy-name
| Synopsis | Policy name | |
| Context | configure qos sap-ingress qos-policy-name | |
| Tree | sap-ingress | |
| String length | 1 to 64 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
default-fc sap-ingress-fc-name
| Synopsis | Default forwarding class for non-matching traffic | |
| Context | configure qos sap-ingress qos-policy-name default-fc sap-ingress-fc-name | |
| Tree | default-fc | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
default-priority keyword
| Synopsis | Priority for packets received on an ingress SAP | |
| Context | configure qos sap-ingress qos-policy-name default-priority keyword | |
| Tree | default-priority | |
| Options | ||
| Default | low | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos sap-ingress qos-policy-name description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
dot1p [dot1p-value] number
| Synopsis | Enter the dot1p list instance | |
| Context | configure qos sap-ingress qos-policy-name dot1p number | |
| Tree | dot1p | |
| Introduced | 16.0.R1 | |
Platforms | All |
[dot1p-value] number
| Synopsis | Dot1p value to match in the packet | |
| Context | configure qos sap-ingress qos-policy-name dot1p number | |
| Tree | dot1p | |
| Range | 0 to 7 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc sap-ingress-fc-name
| Synopsis | Forwarding class for traffic matching specified dot1p | |
| Context | configure qos sap-ingress qos-policy-name dot1p number fc sap-ingress-fc-name | |
| Tree | fc | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
priority keyword
| Synopsis | Priority for packets that match the Dot1p value | |
| Context | configure qos sap-ingress qos-policy-name dot1p number priority keyword | |
| Tree | priority | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
dscp [dscp-name] keyword
| Synopsis | Enter the dscp list instance | |
| Context | configure qos sap-ingress qos-policy-name dscp keyword | |
| Tree | dscp | |
| Introduced | 16.0.R1 | |
Platforms | All |
[dscp-name] keyword
| Synopsis | Name for the Differentiated Services Code Point (DSCP) | |
| Context | configure qos sap-ingress qos-policy-name dscp keyword | |
| Tree | dscp | |
| Options | ||
Notes |
This element is part of a list key. | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fc sap-ingress-fc-name
| Synopsis | Forwarding class for traffic matching specified DSCP | |
| Context | configure qos sap-ingress qos-policy-name dscp keyword fc sap-ingress-fc-name | |
| Tree | fc | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
priority keyword
| Synopsis | Priority for the packet | |
| Context | configure qos sap-ingress qos-policy-name dscp keyword priority keyword | |
| Tree | priority | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fc [fc-name] sap-ingress-fc-name
| Synopsis | Enter the fc list instance | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name | |
| Tree | fc | |
| Introduced | 16.0.R1 | |
Platforms | All |
[fc-name] sap-ingress-fc-name
| Synopsis | Forwarding class (and optional subclass) name | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name | |
| Tree | fc | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
broadcast-policer number
| Synopsis | Policer ID for multicast traffic in forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name broadcast-policer number | |
| Tree | broadcast-policer | |
| Range | 1 to 63 | |
Notes | The following elements are part of a choice: (broadcast-policer and fp-redirect-group-broadcast-policer), broadcast-queue, or broadcast-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
broadcast-queue reference
| Synopsis | Broadcast queue for packets in the forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name broadcast-queue reference | |
| Tree | broadcast-queue | |
Reference | configure qos sap-ingress qos-policy-name queue number | |
Notes | The following elements are part of a choice: (broadcast-policer and fp-redirect-group-broadcast-policer), broadcast-queue, or broadcast-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
broadcast-queue-group-queue
| Synopsis | Enable the broadcast-queue-group-queue context | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name broadcast-queue-group-queue | |
| Tree | broadcast-queue-group-queue | |
Notes | The following elements are part of a choice: (broadcast-policer and fp-redirect-group-broadcast-policer), broadcast-queue, or broadcast-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue reference
| Synopsis | Broadcast queue for packets in the forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name broadcast-queue-group-queue queue reference | |
| Tree | queue | |
Reference | configure qos queue-group-templates ingress queue-group named-item queue number | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-name reference
| Synopsis | Queue group name to forward traffic | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name broadcast-queue-group-queue queue-group-name reference | |
| Tree | queue-group-name | |
Reference | configure qos queue-group-templates ingress queue-group named-item | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
de-1-out-profile boolean
| Synopsis | Frames with DE value to be assigned as out of profile | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name de-1-out-profile boolean | |
| Tree | de-1-out-profile | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
egress-fc keyword
| Synopsis | Forwarding class for egress QoS processing | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name egress-fc keyword | |
| Tree | egress-fc | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
fp-redirect-group-broadcast-policer
| Synopsis | Use policer as defined in FP queue-group for the SAP | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name fp-redirect-group-broadcast-policer | |
| Tree | fp-redirect-group-broadcast-policer | |
Notes | The following elements are part of a choice: (broadcast-policer and fp-redirect-group-broadcast-policer), broadcast-queue, or broadcast-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
fp-redirect-group-multicast-policer
| Synopsis | Use policer as defined in FP queue-group for the SAP | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name fp-redirect-group-multicast-policer | |
| Tree | fp-redirect-group-multicast-policer | |
Notes | The following elements are part of a choice: (fp-redirect-group-multicast-policer and multicast-policer), multicast-queue, or multicast-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
fp-redirect-group-policer
| Synopsis | Use policer as defined in FP queue-group for the SAP | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name fp-redirect-group-policer | |
| Tree | fp-redirect-group-policer | |
Notes | The following elements are part of a choice: (fp-redirect-group-policer and policer), queue, or queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
fp-redirect-group-unknown-policer
| Synopsis | Use policer as defined in FP queue-group for the SAP | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name fp-redirect-group-unknown-policer | |
| Tree | fp-redirect-group-unknown-policer | |
Notes | The following elements are part of a choice: (fp-redirect-group-unknown-policer and unknown-policer), unknown-queue, or unknown-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
in-remark
| Synopsis | Enter the in-remark context | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name in-remark | |
| Tree | in-remark | |
| Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
prec number
multicast-policer number
| Synopsis | Policer ID for multicast traffic in forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name multicast-policer number | |
| Tree | multicast-policer | |
| Range | 1 to 63 | |
Notes | The following elements are part of a choice: (fp-redirect-group-multicast-policer and multicast-policer), multicast-queue, or multicast-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
multicast-queue reference
| Synopsis | Broadcast queue to assign for packets in this forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name multicast-queue reference | |
| Tree | multicast-queue | |
Reference | configure qos sap-ingress qos-policy-name queue number | |
Notes | The following elements are part of a choice: (fp-redirect-group-multicast-policer and multicast-policer), multicast-queue, or multicast-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
multicast-queue-group-queue
| Synopsis | Enable the multicast-queue-group-queue context | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name multicast-queue-group-queue | |
| Tree | multicast-queue-group-queue | |
Notes | The following elements are part of a choice: (fp-redirect-group-multicast-policer and multicast-policer), multicast-queue, or multicast-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue reference
| Synopsis | Broadcast queue for packets in the forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name multicast-queue-group-queue queue reference | |
| Tree | queue | |
Reference | configure qos queue-group-templates ingress queue-group named-item queue number | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-name reference
| Synopsis | Queue group name to forward traffic | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name multicast-queue-group-queue queue-group-name reference | |
| Tree | queue-group-name | |
Reference | configure qos queue-group-templates ingress queue-group named-item | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
out-remark
| Synopsis | Enter the out-remark context | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name out-remark | |
| Tree | out-remark | |
| Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
| Synopsis | DSCP to override DSCP bits of the matching packet | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name out-remark dscp keyword | |
| Tree | dscp | |
| Options | ||
Notes |
The following elements are part of a choice: dscp or prec. | |
| Introduced | 16.0.R1 | |
Platforms | All |
prec number
| Synopsis | Value to override precedence bits of matching packet | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name out-remark prec number | |
| Tree | prec | |
| Range | 0 to 7 | |
Notes | The following elements are part of a choice: dscp or prec. | |
| Introduced | 16.0.R1 | |
Platforms | All |
policer number
| Synopsis | Policer ID for unicast traffic in the forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name policer number | |
| Tree | policer | |
| Range | 1 to 63 | |
Notes | The following elements are part of a choice: (fp-redirect-group-policer and policer), queue, or queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile keyword
| Synopsis | Packets profile associated with the forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name profile keyword | |
| Tree | profile | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
queue reference
| Synopsis | Queue to assign for packets in this forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name queue reference | |
| Tree | queue | |
Reference | configure qos sap-ingress qos-policy-name queue number | |
Notes | The following elements are part of a choice: (fp-redirect-group-policer and policer), queue, or queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-queue
| Synopsis | Enable the queue-group-queue context | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name queue-group-queue | |
| Tree | queue-group-queue | |
Notes | The following elements are part of a choice: (fp-redirect-group-policer and policer), queue, or queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue reference
| Synopsis | Queue to assign for packets in this forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name queue-group-queue queue reference | |
| Tree | queue | |
Reference | configure qos queue-group-templates ingress queue-group named-item queue number | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-name reference
| Synopsis | Queue group to forward traffic | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name queue-group-queue queue-group-name reference | |
| Tree | queue-group-name | |
Reference | configure qos queue-group-templates ingress queue-group named-item | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
unknown-policer number
| Synopsis | Policer ID for multicast traffic in forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name unknown-policer number | |
| Tree | unknown-policer | |
| Range | 1 to 63 | |
Notes | The following elements are part of a choice: (fp-redirect-group-unknown-policer and unknown-policer), unknown-queue, or unknown-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
unknown-queue reference
| Synopsis | Broadcast queue to assign for packets in this forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name unknown-queue reference | |
| Tree | unknown-queue | |
Reference | configure qos sap-ingress qos-policy-name queue number | |
Notes | The following elements are part of a choice: (fp-redirect-group-unknown-policer and unknown-policer), unknown-queue, or unknown-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
unknown-queue-group-queue
| Synopsis | Enable the unknown-queue-group-queue context | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name unknown-queue-group-queue | |
| Tree | unknown-queue-group-queue | |
Notes | The following elements are part of a choice: (fp-redirect-group-unknown-policer and unknown-policer), unknown-queue, or unknown-queue-group-queue. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue reference
| Synopsis | Broadcast queue for packets in the forwarding class | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name unknown-queue-group-queue queue reference | |
| Tree | queue | |
Reference | configure qos queue-group-templates ingress queue-group named-item queue number | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-group-name reference
| Synopsis | Queue group name to forward traffic | |
| Context | configure qos sap-ingress qos-policy-name fc sap-ingress-fc-name unknown-queue-group-queue queue-group-name reference | |
| Tree | queue-group-name | |
Reference | configure qos queue-group-templates ingress queue-group named-item | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-criteria
| Synopsis | Enter the ip-criteria context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria | |
| Tree | ip-criteria | |
| Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
| Synopsis | Enter the entry list instance | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number | |
| Tree | entry | |
| Introduced | 16.0.R1 | |
Platforms | All |
[entry-id] number
| Synopsis | IP criteria entry to create or edit for the policy | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number | |
| Tree | entry | |
| Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
action
| Synopsis | Enter the action context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number action | |
| Tree | action | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc sap-ingress-fc-name
| Synopsis | Forwarding class for traffic matching the criteria | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number action fc sap-ingress-fc-name | |
| Tree | fc | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
policer reference
| Synopsis | Policer ID for traffic matching the criteria | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number action policer reference | |
| Tree | policer | |
Reference | configure qos sap-ingress qos-policy-name policer number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority keyword
| Synopsis | Priority for the packet | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number action priority keyword | |
| Tree | priority | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
type keyword
| Synopsis | Action for criteria entry | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number action type keyword | |
| Tree | type | |
| Options | ||
| Default | ignore-match | |
| Introduced | 16.0.R1 | |
Platforms |
All |
description description
| Synopsis | Text description | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
match
| Synopsis | Enter the match context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match | |
| Tree | match | |
| Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
| Synopsis | DSCP value to match in the packet | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dscp keyword | |
| Tree | dscp | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
dst-ip
| Synopsis | Enter the dst-ip context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-ip | |
| Tree | dst-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
address (ipv4-prefix-with-host-bits | ipv4-address)
| Synopsis | Destination IPv4 address for SAP QoS policy match | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
| Synopsis | IP-prefix list as match criterion | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-ip ip-prefix-list reference | |
| Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask ipv4-address
| Synopsis | IP address to match with source IP of the packet | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-ip mask ipv4-address | |
| Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
dst-port
| Synopsis | Enter the dst-port context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-port | |
| Tree | dst-port | |
| Introduced | 16.0.R1 | |
Platforms | All |
eq number
| Synopsis | Value 'equal to' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-port eq number | |
| Tree | eq | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
gt number
| Synopsis | Value 'greater than' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Value 'less than' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
range
| Synopsis | Enter the range context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-port range | |
| Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of the port range | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-port range end number | |
| Tree | end | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start number
| Synopsis | Lower bound of the port range | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match dst-port range start number | |
| Tree | start | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fragment keyword
| Synopsis | Fragmented packets as the match criterion | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match fragment keyword | |
| Tree | fragment | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
protocol (number | keyword)
| Synopsis | IP protocol to match | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match protocol (number | keyword) | |
| Tree | protocol | |
| Range | 0 to 255 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
| Synopsis | Enter the src-ip context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-ip | |
| Tree | src-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
address (ipv4-prefix-with-host-bits | ipv4-address)
| Synopsis | Source IPv4 address for SAP QoS policy match criterion | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
| Synopsis | IP-prefix list as match criterion | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-ip ip-prefix-list reference | |
| Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask ipv4-address
| Synopsis | IP address to match with source IP of the packet | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-ip mask ipv4-address | |
| Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
src-port
| Synopsis | Enter the src-port context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-port | |
| Tree | src-port | |
| Introduced | 16.0.R1 | |
Platforms | All |
eq number
| Synopsis | Value 'equal to' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-port eq number | |
| Tree | eq | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
gt number
| Synopsis | Value 'greater than' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Value 'less than' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
range
| Synopsis | Enter the range context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-port range | |
| Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of the port range | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-port range end number | |
| Tree | end | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start number
| Synopsis | Lower bound of the port range | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match src-port range start number | |
| Tree | start | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
vxlan-vni
| Synopsis | Enter the vxlan-vni context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match vxlan-vni | |
| Tree | vxlan-vni | |
| Introduced | 16.0.R1 | |
Platforms | All |
eq number
| Synopsis | Value 'equal to' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match vxlan-vni eq number | |
| Tree | eq | |
| Range | 1 to 16777215 | |
Notes | The following elements are part of a choice: eq or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
range
| Synopsis | Enter the range context | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match vxlan-vni range | |
| Tree | range | |
Notes | The following elements are part of a choice: eq or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of the VNI range | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match vxlan-vni range end number | |
| Tree | end | |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
start number
| Synopsis | Lower bound of the VNI range | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number match vxlan-vni range start number | |
| Tree | start | |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
tag number
| Synopsis | Tag ID associated with the criteria entry | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria entry number tag number | |
| Tree | tag | |
Description | This command associates a tag with the criteria entry. Tag identifiers are not supported in SAP ingress QoS policies, MAC criteria statements, or in SAP egress QoS policies. | |
| Range | 0 to 255 | |
| Default | 0 | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv4 criteria entry type | |
| Context | configure qos sap-ingress qos-policy-name ip-criteria type keyword | |
| Tree | type | |
Description | This command specifies the type of entries that can be configured for IPv4 match criteria. | |
| Options | ||
| Default | normal | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
ipv6-criteria
| Synopsis | Enter the ipv6-criteria context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria | |
| Tree | ipv6-criteria | |
| Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
| Synopsis | Enter the entry list instance | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number | |
| Tree | entry | |
| Introduced | 16.0.R1 | |
Platforms | All |
[entry-id] number
| Synopsis | IPv6 criteria entry to create or edit for the policy | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number | |
| Tree | entry | |
| Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
action
| Synopsis | Enter the action context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number action | |
| Tree | action | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc sap-ingress-fc-name
| Synopsis | Forwarding class for traffic matching the criteria | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number action fc sap-ingress-fc-name | |
| Tree | fc | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
policer reference
| Synopsis | Policer ID for traffic matching the criteria | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number action policer reference | |
| Tree | policer | |
Reference | configure qos sap-ingress qos-policy-name policer number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority keyword
| Synopsis | Priority for the packet | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number action priority keyword | |
| Tree | priority | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
type keyword
| Synopsis | Action for criteria entry | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number action type keyword | |
| Tree | type | |
| Options | ||
| Default | ignore-match | |
| Introduced | 16.0.R1 | |
Platforms |
All |
description description
| Synopsis | Text description | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
match
| Synopsis | Enter the match context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match | |
| Tree | match | |
| Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
| Synopsis | DSCP value to match in the packet | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dscp keyword | |
| Tree | dscp | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
dst-ip
| Synopsis | Enter the dst-ip context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-ip | |
| Tree | dst-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
address (ipv6-prefix-with-host-bits | ipv6-address)
| Synopsis | IPv6 address to match destination IP of the packet | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
| Synopsis | IPv6 prefix list as match criterion for IPv6 addresses | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-ip ipv6-prefix-list reference | |
| Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask ipv6-address
| Synopsis | IP address to match with source IP of the packet | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-ip mask ipv6-address | |
| Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
dst-port
| Synopsis | Enter the dst-port context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-port | |
| Tree | dst-port | |
| Introduced | 16.0.R1 | |
Platforms | All |
eq number
| Synopsis | Value 'equal to' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-port eq number | |
| Tree | eq | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
gt number
| Synopsis | Value 'greater than' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Value 'less than' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
range
| Synopsis | Enter the range context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-port range | |
| Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of the port range | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-port range end number | |
| Tree | end | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start number
| Synopsis | Lower bound of the port range | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match dst-port range start number | |
| Tree | start | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fragment keyword
| Synopsis | Fragmented packets as the match criterion | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match fragment keyword | |
| Tree | fragment | |
| Options | ||
| Introduced | 16.0.R1 | |
|
Platforms | All |
next-header (number | keyword)
| Synopsis | IP protocol to match | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match next-header (number | keyword) | |
| Tree | next-header | |
| Range | 0 to 255 | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
| Synopsis | Enter the src-ip context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-ip | |
| Tree | src-ip | |
| Introduced | 16.0.R1 | |
Platforms | All |
address (ipv6-prefix-with-host-bits | ipv6-address)
| Synopsis | IPv4 address to match | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
| Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
| Synopsis | IPv6 prefix list as match criterion for IPv6 addresses | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-ip ipv6-prefix-list reference | |
| Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list named-item | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask ipv6-address
| Synopsis | IP address to match with source IP of the packet | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-ip mask ipv6-address | |
| Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
| Introduced | 16.0.R1 | |
Platforms | All |
src-port
| Synopsis | Enter the src-port context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-port | |
| Tree | src-port | |
| Introduced | 16.0.R1 | |
Platforms | All |
eq number
| Synopsis | Value 'equal to' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-port eq number | |
| Tree | eq | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
gt number
| Synopsis | Value 'greater than' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-port gt number | |
| Tree | gt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
lt number
| Synopsis | Value 'less than' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-port lt number | |
| Tree | lt | |
| Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
range
| Synopsis | Enter the range context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-port range | |
| Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of the port range | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-port range end number | |
| Tree | end | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start number
| Synopsis | Lower bound of the port range | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match src-port range start number | |
| Tree | start | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
vxlan-vni
| Synopsis | Enter the vxlan-vni context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match vxlan-vni | |
| Tree | vxlan-vni | |
| Introduced | 16.0.R1 | |
Platforms | All |
eq number
| Synopsis | Value 'equal to' assigned as match condition | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match vxlan-vni eq number | |
| Tree | eq | |
| Range | 1 to 16777215 | |
Notes | The following elements are part of a choice: eq or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
range
| Synopsis | Enter the range context | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match vxlan-vni range | |
| Tree | range | |
Notes | The following elements are part of a choice: eq or range. | |
| Introduced | 16.0.R1 | |
Platforms | All |
end number
| Synopsis | Upper bound of the VNI range | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match vxlan-vni range end number | |
| Tree | end | |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
start number
| Synopsis | Lower bound of the VNI range | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number match vxlan-vni range start number | |
| Tree | start | |
| Range | 1 to 16777215 | |
| Introduced | 16.0.R1 | |
Platforms | All |
tag number
| Synopsis | Tag ID associated with the criteria entry | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria entry number tag number | |
| Tree | tag | |
Description | This command associates a tag with the criteria entry. Tag identifiers are not supported in SAP ingress QoS policies, MAC criteria statements, or in SAP egress QoS policies. | |
| Range | 0 to 255 | |
| Default | 0 | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | IPv6 criteria entry type | |
| Context | configure qos sap-ingress qos-policy-name ipv6-criteria type keyword | |
| Tree | type | |
Description | This command specifies the type of entries that can be configured for IPv6 match criteria. | |
| Options | ||
| Default | normal | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
lsp-exp [lsp-exp-value] number
| Synopsis | Enter the lsp-exp list instance | |
| Context | configure qos sap-ingress qos-policy-name lsp-exp number | |
| Tree | lsp-exp | |
| Introduced | 16.0.R1 | |
Platforms | All |
[lsp-exp-value] number
| Synopsis | LSP EXP value to match the LSP EXP rule | |
| Context | configure qos sap-ingress qos-policy-name lsp-exp number | |
| Tree | lsp-exp | |
| Range | 0 to 7 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc sap-ingress-fc-name
| Synopsis | Forwarding class for traffic matching the LSP EXP value | |
| Context | configure qos sap-ingress qos-policy-name lsp-exp number fc sap-ingress-fc-name | |
| Tree | fc | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
priority keyword
| Synopsis | Priority for the matching traffic | |
| Context | configure qos sap-ingress qos-policy-name lsp-exp number priority keyword | |
| Tree | priority | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mac-criteria
| Synopsis | Enter the mac-criteria context | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria | |
| Tree | mac-criteria | |
| Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
| Synopsis | Enter the entry list instance | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number | |
| Tree | entry | |
| Introduced | 16.0.R1 | |
Platforms | All |
[entry-id] number
| Synopsis | Entry ID | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number | |
| Tree | entry | |
| Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
action
| Synopsis | Enter the action context | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number action | |
| Tree | action | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc sap-ingress-fc-name
| Synopsis | Forwarding class for traffic matching the criteria | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number action fc sap-ingress-fc-name | |
| Tree | fc | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
policer reference
| Synopsis | Policer ID for traffic matching the criteria | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number action policer reference | |
| Tree | policer | |
Reference | configure qos sap-ingress qos-policy-name policer number | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority keyword
| Synopsis | Priority for the packet | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number action priority keyword | |
| Tree | priority | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
type keyword
| Synopsis | Action for criteria entry | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number action type keyword | |
| Tree | type | |
| Options | ||
| Default | ignore-match | |
| Introduced | 16.0.R1 | |
Platforms |
All |
description description
| Synopsis | Text description | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
match
| Synopsis | Enter the match context | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match | |
| Tree | match | |
| Introduced | 16.0.R1 | |
Platforms | All |
dot1p
| Synopsis | Enable the dot1p context | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match dot1p | |
| Tree | dot1p | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask number
| Synopsis | 3-bit mask for the 802.1p value | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match dot1p mask number | |
| Tree | mask | |
| Range | 0 to 7 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
priority number
| Synopsis | 802.1P priority value to use as the match criterion | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match dot1p priority number | |
| Tree | priority | |
| Range | 0 to 7 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
dst-mac
| Synopsis | Enable the dst-mac context | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match dst-mac | |
| Tree | dst-mac | |
| Introduced | 16.0.R1 | |
Platforms | All |
address mac-address
| Synopsis | Destination MAC address as QoS policy match criterion | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match dst-mac address mac-address | |
| Tree | address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask mac-address
| Synopsis | Mask for destination MAC address | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match dst-mac mask mac-address | |
| Tree | mask | |
| Default | ff:ff:ff:ff:ff:ff | |
| Introduced | 16.0.R1 | |
Platforms | All |
etype etype-value
| Synopsis | Ethernet type | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match etype etype-value | |
| Tree | etype | |
| String length | 5 to 6 | |
| Introduced | 16.0.R1 | |
Platforms | All |
frame-type keyword
| Synopsis | Match MAC criteria for ingress SAP QoS policy | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match frame-type keyword | |
| Tree | frame-type | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
inner-tag
| Synopsis | Enable the inner-tag context | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match inner-tag | |
| Tree | inner-tag | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask number
| Synopsis | Mask to VID of the inner VLAN tag before comparing it with the inner-tag or outer-tag value | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match inner-tag mask number | |
| Tree | mask | |
| Range | 1 to 4095 | |
| Default | 4095 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
vlan number
| Synopsis | Value to match against the VID of the second VLAN tag | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match inner-tag vlan number | |
| Tree | vlan | |
| Range | 0 to 4095 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
llc-dsap
| Synopsis | Enable the llc-dsap context | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match llc-dsap | |
| Tree | llc-dsap | |
| Introduced | 16.0.R1 | |
Platforms | All |
dsap number
| Synopsis | DSAP value | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match llc-dsap dsap number | |
| Tree | dsap | |
| Range | 0 to 255 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask number
| Synopsis | DSAP mask | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match llc-dsap mask number | |
| Tree | mask | |
| Range | 0 to 255 | |
| Default | 255 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
llc-ssap
| Synopsis | Enable the llc-ssap context | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match llc-ssap | |
| Tree | llc-ssap | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask number
| Synopsis | Source SAP mask | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match llc-ssap mask number | |
| Tree | mask | |
| Range | 0 to 255 | |
| Default | 255 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
ssap number
| Synopsis | SSAP value | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match llc-ssap ssap number | |
| Tree | ssap | |
| Range | 0 to 255 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
outer-tag
| Synopsis | Enable the outer-tag context | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match outer-tag | |
| Tree | outer-tag | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask number
| Synopsis | First tag carried transparently through the service | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match outer-tag mask number | |
| Tree | mask | |
| Range | 1 to 4095 | |
| Default | 4095 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
vlan number
| Synopsis | Match against VID of the first VLAN tag in the packet carried transparently through service | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match outer-tag vlan number | |
| Tree | vlan | |
| Range | 0 to 4095 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
snap-oui keyword
| Synopsis | Parameter snap-oui as MAC filter match criteria | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match snap-oui keyword | |
| Tree | snap-oui | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
snap-pid number
| Synopsis | Parameter snap-pid as MAC filter match criteria | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match snap-pid number | |
| Tree | snap-pid | |
| Range | 0 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
src-mac
| Synopsis | Enable the src-mac context | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match src-mac | |
| Tree | src-mac | |
| Introduced | 16.0.R1 | |
Platforms | All |
address mac-address
| Synopsis | Source MAC address as QoS policy match criterion | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match src-mac address mac-address | |
| Tree | address | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
mask mac-address
| Synopsis | Mask for source MAC address | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria entry number match src-mac mask mac-address | |
| Tree | mask | |
| Default | ff:ff:ff:ff:ff:ff | |
| Introduced | 16.0.R1 | |
Platforms | All |
type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | MAC criteria filter type | |
| Context | configure qos sap-ingress qos-policy-name mac-criteria type keyword | |
| Tree | type | |
| Options | ||
| Default | normal | |
| Introduced | 16.0.R1 | |
Platforms | All | |
policer [policer-id] number
| Synopsis | Enter the policer list instance | |
| Context | configure qos sap-ingress qos-policy-name policer number | |
| Tree | policer | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[policer-id] number
| Synopsis | SAP-ingress policer identifier | |
| Context | configure qos sap-ingress qos-policy-name policer number | |
| Tree | policer | |
| Range | 1 to 63 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos sap-ingress qos-policy-name policer number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure qos sap-ingress qos-policy-name policer number adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos sap-ingress qos-policy-name policer number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adv-config-policy reference
| Synopsis | Advanced QoS policy name | |
| Context | configure qos sap-ingress qos-policy-name policer number adv-config-policy reference | |
| Tree | adv-config-policy | |
Reference | configure qos adv-config-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-parent
| Synopsis | Enter the arbiter-parent context | |
| Context | configure qos sap-ingress qos-policy-name policer number arbiter-parent | |
| Tree | arbiter-parent | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-name named-item
| Synopsis | Arbiter name | |
| Context | configure qos sap-ingress qos-policy-name policer number arbiter-parent arbiter-name named-item | |
| Tree | arbiter-name | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos sap-ingress qos-policy-name policer number arbiter-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
| Synopsis | Weight used by the arbiter for feeding the policer | |
| Context | configure qos sap-ingress qos-policy-name policer number arbiter-parent weight number | |
| Tree | weight | |
| Range | 1 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
| Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
| Context | configure qos sap-ingress qos-policy-name policer number cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description description
| Synopsis | Text description | |
| Context | configure qos sap-ingress qos-policy-name policer number description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
high-prio-only (number | keyword)
| Synopsis | Percentage of MBS reserved for high priority traffic | |
| Context | configure qos sap-ingress qos-policy-name policer number high-prio-only (number | keyword) | |
| Tree | high-prio-only | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs (number | keyword)
| Synopsis | High priority violate threshold of PIR leaky bucket | |
| Context | configure qos sap-ingress qos-policy-name policer number mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure qos sap-ingress qos-policy-name policer number packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 31 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos sap-ingress qos-policy-name policer number percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
| Synopsis | Administrative CIR percent | |
| Context | configure qos sap-ingress qos-policy-name policer number percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir decimal-number
| Synopsis | Administrative PIR percent | |
| Context | configure qos sap-ingress qos-policy-name policer number percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
reference-rate keyword
| Synopsis | Reference rate | |
| Context | configure qos sap-ingress qos-policy-name policer number percent-rate reference-rate keyword | |
| Tree | reference-rate | |
| Options | ||
| Default | local-limit | |
| Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile-capped boolean
| Synopsis | Enforce overall in-profile burst limit to CIR bucket | |
| Context | configure qos sap-ingress qos-policy-name policer number profile-capped boolean | |
| Tree | profile-capped | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos sap-ingress qos-policy-name policer number rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
pir (number | keyword)
scheduler-parent
| Synopsis | Enter the scheduler-parent context | |
| Context | configure qos sap-ingress qos-policy-name policer number scheduler-parent | |
| Tree | scheduler-parent | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
cir-level number
| Synopsis | Port priority level for within-CIR offered load | |
| Context | configure qos sap-ingress qos-policy-name policer number scheduler-parent cir-level number | |
| Tree | cir-level | |
Description | This command defines the hierarchy priority level when compared with other policers, queues, and schedulers that the policer uses to receive bandwidth for its within-CIR offered load. If this command is set to the default value, the policer does not receive bandwidth during the within-CIR pass of the scheduler and the cir-weight command is ignored. | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
cir-weight number
| Synopsis | Weight to use in the within-CIR port priority level | |
| Context | configure qos sap-ingress qos-policy-name policer number scheduler-parent cir-weight number | |
| Tree | cir-weight | |
Description | The command defines the relative weight of the policer in comparison with other child policers, queues, or schedulers competing for bandwidth on the parent scheduler name at the within-CIR priority level. A weight is considered to be active when the applicable policer, queue, or scheduler has not reached its maximum rate and still has packets to transmit. When this command is set to a value of 0, the policer receives bandwidth only after the other children with a non-zero weight at this level have been serviced. | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
level number
| Synopsis | Priority level for bandwidth on the parent scheduler | |
| Context | configure qos sap-ingress qos-policy-name policer number scheduler-parent level number | |
| Tree | level | |
Description | This command defines the priority level when compared with other policers, queues, and schedulers when competing for bandwidth on the parent scheduler. Children of the parent scheduler with a lower priority do not receive bandwidth until all children with a higher priority have either reached their maximum bandwidth or are idle. Children with the same level are serviced in relation to their relative weights. | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
scheduler-name named-item
| Synopsis | Scheduler name | |
| Context | configure qos sap-ingress qos-policy-name policer number scheduler-parent scheduler-name named-item | |
| Tree | scheduler-name | |
| String length | 1 to 32 | |
| Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
weight number
| Synopsis | Policer weight at the above-CIR priority level | |
| Context | configure qos sap-ingress qos-policy-name policer number scheduler-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
stat-mode keyword
| Synopsis | Mode of statistics collected by the policer | |
| Context | configure qos sap-ingress qos-policy-name policer number stat-mode keyword | |
| Tree | stat-mode | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policers-hqos-manageable boolean
| Synopsis | Manage policers through the hierarchical QoS process | |
| Context | configure qos sap-ingress qos-policy-name policers-hqos-manageable boolean | |
| Tree | policers-hqos-manageable | |
| Default | false | |
| Introduced | 22.2.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
policy-id number
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Ingress SAP QoS policy ID | |
| Context | configure qos sap-ingress qos-policy-name policy-id number | |
| Tree | policy-id | |
| Range | 1 to 65535 | |
| Introduced | 16.0.R1 | |
|
Platforms | All | |
prec [prec-value] number
| Synopsis | Enter the prec list instance | |
| Context | configure qos sap-ingress qos-policy-name prec number | |
| Tree | prec | |
| Introduced | 16.0.R1 | |
Platforms | All |
[prec-value] number
| Synopsis | Precedence value for which mapping is performed | |
| Context | configure qos sap-ingress qos-policy-name prec number | |
| Tree | prec | |
| Range | 0 to 7 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc sap-ingress-fc-name
| Synopsis | Forwarding class for traffic matching precedence value | |
| Context | configure qos sap-ingress qos-policy-name prec number fc sap-ingress-fc-name | |
| Tree | fc | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
priority keyword
| Synopsis | Priority for the matching traffic | |
| Context | configure qos sap-ingress qos-policy-name prec number priority keyword | |
| Tree | priority | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue [queue-id] number
| Synopsis | Enter the queue list instance | |
| Context | configure qos sap-ingress qos-policy-name queue number | |
| Tree | queue | |
| Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
| Synopsis | SAP-ingress policer identifier | |
| Context | configure qos sap-ingress qos-policy-name queue number | |
| Tree | queue | |
| Range | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
| Synopsis | Enter the adaptation-rule context | |
| Context | configure qos sap-ingress qos-policy-name queue number adaptation-rule | |
| Tree | adaptation-rule | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
| Synopsis | Constraint used when deriving the operational CIR value | |
| Context | configure qos sap-ingress qos-policy-name queue number adaptation-rule cir keyword | |
| Tree | cir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
fir keyword
| Synopsis | Constraint used when deriving the operational FIR value | |
| Context | configure qos sap-ingress qos-policy-name queue number adaptation-rule fir keyword | |
| Tree | fir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R2 | |
|
Platforms | All |
pir keyword
| Synopsis | Constraint used when deriving the operational PIR value | |
| Context | configure qos sap-ingress qos-policy-name queue number adaptation-rule pir keyword | |
| Tree | pir | |
| Options | ||
| Default | closest | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
adv-config-policy reference
| Synopsis | Advanced QoS policy name | |
| Context | configure qos sap-ingress qos-policy-name queue number adv-config-policy reference | |
| Tree | adv-config-policy | |
Reference | configure qos adv-config-policy named-item | |
| Introduced | 16.0.R1 | |
Platforms | All |
burst-limit (number | keyword)
| Synopsis | Explicit shaping burst size of a queue | |
| Context | configure qos sap-ingress qos-policy-name queue number burst-limit (number | keyword) | |
| Tree | burst-limit | |
| Range | 1 to 14000000 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
cbs (number | keyword)
| Synopsis | Reserved buffer space for the queue | |
| Context | configure qos sap-ingress qos-policy-name queue number cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 1048576 | |
| Units | kilobytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
cir-non-profiling boolean
| Synopsis | Prevent profile modification of CIR dependent packets | |
| Context | configure qos sap-ingress qos-policy-name queue number cir-non-profiling boolean | |
| Tree | cir-non-profiling | |
| Default | false | |
| Introduced | 16.0.R2 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
drop-tail
| Synopsis | Enter the drop-tail context | |
| Context | configure qos sap-ingress qos-policy-name queue number drop-tail | |
| Tree | drop-tail | |
| Introduced | 16.0.R1 | |
Platforms | All |
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Low drop-tail percent from MBS that is reduced | |
| Context | configure qos sap-ingress qos-policy-name queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mbs (number | keyword)
| Synopsis | Maximum buffer space that is allowed for queue | |
| Context | configure qos sap-ingress qos-policy-name queue number mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 1073741824 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | All |
multipoint boolean
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Apply as a multicast queue | |
| Context | configure qos sap-ingress qos-policy-name queue number multipoint boolean | |
| Tree | multipoint | |
| Introduced | 16.0.R1 | |
Platforms | All | |
packet-byte-offset number
| Synopsis | Packet size modification for queue accounting | |
| Context | configure qos sap-ingress qos-policy-name queue number packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 30 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos sap-ingress qos-policy-name queue number percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
| Synopsis | Administrative CIR percent | |
| Context | configure qos sap-ingress qos-policy-name queue number percent-rate cir decimal-number | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
|
Notes | The following elements are part of a choice: (cir and fir) or police. | |
| Introduced | 16.0.R1 | |
Platforms | All |
fir decimal-number
| Synopsis | Administrative FIR percent | |
| Context | configure qos sap-ingress qos-policy-name queue number percent-rate fir decimal-number | |
| Tree | fir | |
| Range | 0.00 to 100.00 | |
| Default | 0.00 | |
|
Notes | The following elements are part of a choice: (cir and fir) or police. | |
| Introduced | 16.0.R2 | |
Platforms | All |
pir decimal-number
| Synopsis | Administrative PIR percent | |
| Context | configure qos sap-ingress qos-policy-name queue number percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 16.0.R1 | |
Platforms | All |
police
| Synopsis | Drop out-of-profile traffic feeding into queue instance | |
| Context | configure qos sap-ingress qos-policy-name queue number percent-rate police | |
| Tree | police | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
| Introduced | 16.0.R1 | |
Platforms | All |
reference-rate keyword
| Synopsis | Reference rate | |
| Context | configure qos sap-ingress qos-policy-name queue number percent-rate reference-rate keyword | |
| Tree | reference-rate | |
| Options | ||
| Default | port-limit | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-mode keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Operating mode for this queue | |
| Context | configure qos sap-ingress qos-policy-name queue number queue-mode keyword | |
| Tree | queue-mode | |
| Options | ||
| Default | priority | |
| Introduced | 16.0.R1 | |
Platforms | All | |
queue-type keyword
|
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
| Synopsis | Method used to service queue from hardware perspective | |
| Context | configure qos sap-ingress qos-policy-name queue number queue-type keyword | |
| Tree | queue-type | |
| Options | ||
| Default | auto-expedited | |
| Introduced | 16.0.R1 | |
Platforms | All | |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos sap-ingress qos-policy-name queue number rate | |
| Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
fir (number | keyword)
pir (number | keyword)
police
scheduler-parent
| Synopsis | Enter the scheduler-parent context | |
| Context | configure qos sap-ingress qos-policy-name queue number scheduler-parent | |
| Tree | scheduler-parent | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos sap-ingress qos-policy-name queue number scheduler-parent cir-level number | |
| Tree | cir-level | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure qos sap-ingress qos-policy-name queue number scheduler-parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos sap-ingress qos-policy-name queue number scheduler-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
scheduler-name named-item
| Synopsis | Scheduler name | |
| Context | configure qos sap-ingress qos-policy-name queue number scheduler-parent scheduler-name named-item | |
| Tree | scheduler-name | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | All |
weight number
| Synopsis | Relative weight of the scheduler to feed the queue | |
| Context | configure qos sap-ingress qos-policy-name queue number scheduler-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
scope keyword
| Synopsis | Scope of the policy | |
| Context | configure qos sap-ingress qos-policy-name scope keyword | |
| Tree | scope | |
| Options | ||
| Default | template | |
| Introduced | 16.0.R1 | |
Platforms | All |
subscriber-mgmt
| Synopsis | Enter the subscriber-mgmt context | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt | |
| Tree | subscriber-mgmt | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dynamic-policer
| Synopsis | Enter the dynamic-policer context | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer | |
| Tree | dynamic-policer | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arbiter-parent
| Synopsis | Enter the arbiter-parent context | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer arbiter-parent | |
| Tree | arbiter-parent | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arbiter-name named-item
| Synopsis | Arbiter name | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer arbiter-parent arbiter-name named-item | |
| Tree | arbiter-name | |
| String length | 1 to 32 | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer arbiter-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
weight number
| Synopsis | Weight used by the arbiter for feeding the policer | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer arbiter-parent weight number | |
| Tree | weight | |
| Range | 1 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cbs (number | keyword)
| Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer cbs (number | keyword) | |
| Tree | cbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mbs (number | keyword)
| Synopsis | High priority violate threshold of PIR leaky bucket of this policer | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer mbs (number | keyword) | |
| Tree | mbs | |
| Range | 0 to 268435456 | |
| Units | bytes | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
packet-byte-offset number
| Synopsis | Packet size modification for policing information | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer packet-byte-offset number | |
| Tree | packet-byte-offset | |
| Range | -32 to 31 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policer-id-range
| Synopsis | Enable the policer-id-range context | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer policer-id-range | |
| Tree | policer-id-range | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end number
| Synopsis | Upper bound of the dynamic policer ID range | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer policer-id-range end number | |
| Tree | end | |
| Range | 1 to 63 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start number
| Synopsis | Lower bound of the dynamic policer ID range | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer policer-id-range start number | |
| Tree | start | |
| Range | 1 to 63 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
stat-mode keyword
| Synopsis | Mode of statistics collected by the policer | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt dynamic-policer stat-mode keyword | |
| Tree | stat-mode | |
| Options | ||
| Default | minimal | |
| Introduced | 16.0.R1 | |
|
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pcc-rule-entry
| Synopsis | Enter the pcc-rule-entry context | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt pcc-rule-entry | |
| Tree | pcc-rule-entry | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
range
| Synopsis | Enable the range context | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt pcc-rule-entry range | |
| Tree | range | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end number
| Synopsis | Upper bound of the filter and QoS policy entries range | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt pcc-rule-entry range end number | |
| Tree | end | |
| Range | 1 to 65535 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start number
| Synopsis | Lower bound of the filter and QoS policy entries range | |
| Context | configure qos sap-ingress qos-policy-name subscriber-mgmt pcc-rule-entry range start number | |
| Tree | start | |
| Range | 1 to 65535 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
scheduler-policy [scheduler-policy-name] named-item
| Synopsis | Enter the scheduler-policy list instance | |
| Context | configure qos scheduler-policy named-item | |
| Tree | scheduler-policy | |
| Max. instances | 2047 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[scheduler-policy-name] named-item
| Synopsis | Scheduler policy name | |
| Context | configure qos scheduler-policy named-item | |
| Tree | scheduler-policy | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos scheduler-policy named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
frame-based-accounting boolean
| Synopsis | Use frame-based accounting for queues and schedulers | |
| Context | configure qos scheduler-policy named-item frame-based-accounting boolean | |
| Tree | frame-based-accounting | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
tier [tier-id] number
| Synopsis | Enter the tier list instance | |
| Context | configure qos scheduler-policy named-item tier number | |
| Tree | tier | |
| Introduced | 16.0.R1 | |
Platforms | All |
[tier-id] number
| Synopsis | Tier for scheduler-policy scheduler | |
| Context | configure qos scheduler-policy named-item tier number | |
| Tree | tier | |
| Range | 1 to 3 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
parent-location keyword
| Synopsis | Expected location of parent schedulers | |
| Context | configure qos scheduler-policy named-item tier number parent-location keyword | |
| Tree | parent-location | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
scheduler [scheduler-name] named-item
| Synopsis | Enter the scheduler list instance | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item | |
| Tree | scheduler | |
| Introduced | 16.0.R1 | |
Platforms | All |
[scheduler-name] named-item
| Synopsis | Scheduler name | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item | |
| Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context will not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
limit-unused-bandwidth boolean
| Synopsis | Enable aggregate rate overrun protection | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item limit-unused-bandwidth boolean | |
| Tree | limit-unused-bandwidth | |
| Default | false | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
percent-rate
| Synopsis | Enter the percent-rate context | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item percent-rate | |
| Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
| Introduced | 20.10.R1 | |
Platforms | All |
cir (keyword | decimal-number)
| Synopsis | Scheduler CIR | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item percent-rate cir (keyword | decimal-number) | |
| Tree | cir | |
| Range | 0.00 to 100.00 | |
| Options | ||
| Default | sum | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
pir decimal-number
| Synopsis | Scheduler PIR | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item percent-rate pir decimal-number | |
| Tree | pir | |
| Range | 0.01 to 100.00 | |
| Introduced | 20.10.R1 | |
Platforms | All |
reference-rate keyword
| Synopsis | Reference rate | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item percent-rate reference-rate keyword | |
| Tree | reference-rate | |
| Options | ||
| Default | reference-port-limit | |
| Introduced | 20.10.R1 | |
|
Platforms | All |
port-parent
| Synopsis | Enable the port-parent context | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item port-parent | |
| Tree | port-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
| Synopsis | Port priority to receive bandwidth for within-CIR pass | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item port-parent cir-level number | |
| Tree | cir-level | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item port-parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
level number
| Synopsis | Port priority for bandwidth for above-CIR offered load | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item port-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
weight number
| Synopsis | Weight used at the above-CIR port priority level | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item port-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
rate
cir (number | keyword)
pir (number | keyword)
scheduler-parent
| Synopsis | Enable the scheduler-parent context | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item scheduler-parent | |
| Tree | scheduler-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item scheduler-parent cir-level number | |
| Tree | cir-level | |
| Range | 0 to 8 | |
| Default | 0 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
| Synopsis | Weight used at the within-CIR port priority level | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item scheduler-parent cir-weight number | |
| Tree | cir-weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
level number
| Synopsis | Level of priority while feeding to the parent | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item scheduler-parent level number | |
| Tree | level | |
| Range | 1 to 8 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
scheduler-name named-item
| Synopsis | Scheduler name | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item scheduler-parent scheduler-name named-item | |
| Tree | scheduler-name | |
| String length | 1 to 32 | |
Notes | This element is mandatory. | |
| Introduced | 16.0.R1 | |
Platforms | All |
weight number
| Synopsis | Relative weight of the scheduler to feed the queue | |
| Context | configure qos scheduler-policy named-item tier number scheduler named-item scheduler-parent weight number | |
| Tree | weight | |
| Range | 0 to 100 | |
| Default | 1 | |
| Introduced | 16.0.R1 | |
Platforms |
All |
shared-queue [shared-queue-policy-name] named-item
| Synopsis | Enter the shared-queue list instance | |
| Context | configure qos shared-queue named-item | |
| Tree | shared-queue | |
| Introduced | 16.0.R1 | |
Platforms | All |
[shared-queue-policy-name] named-item
| Synopsis | Name of the default shared queue policy | |
| Context | configure qos shared-queue named-item | |
| Tree | shared-queue | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description-or-empty
| Synopsis | Text description | |
| Context | configure qos shared-queue named-item description description-or-empty | |
| Tree | description | |
| String length | 0 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
fc [fc-name] keyword
| Synopsis | Enter the fc list instance | |
| Context | configure qos shared-queue named-item fc keyword | |
| Tree | fc | |
| Introduced | 16.0.R1 | |
Platforms | All |
[fc-name] keyword
| Synopsis | Forwarding class mapping to queue mapping | |
| Context | configure qos shared-queue named-item fc keyword | |
| Tree | fc | |
| Options | ||
Notes |
This element is part of a list key. | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
broadcast-queue number
| Synopsis | ID of queue to forward all broadcast traffic | |
| Context | configure qos shared-queue named-item fc keyword broadcast-queue number | |
| Tree | broadcast-queue | |
| Range | 9 to 32 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
multicast-queue number
| Synopsis | ID of queue to forward multicast traffic | |
| Context | configure qos shared-queue named-item fc keyword multicast-queue number | |
| Tree | multicast-queue | |
| Range | 9 to 32 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue number
| Synopsis | ID of queue to foward all traffic | |
| Context | configure qos shared-queue named-item fc keyword queue number | |
| Tree | queue | |
| Range | 1 to 8 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
unknown-queue number
| Synopsis | ID of queue to forward unknown unicast traffic | |
| Context | configure qos shared-queue named-item fc keyword unknown-queue number | |
| Tree | unknown-queue | |
| Range | 9 to 32 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
queue [queue-id] number
| Synopsis | Enter the queue list instance | |
| Context | configure qos shared-queue named-item queue number | |
| Tree | queue | |
| Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
| Synopsis | Shared queue identifier | |
| Context | configure qos shared-queue named-item queue number | |
| Tree | queue | |
| Range | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
cbs number
| Synopsis | Committed burst size as a percentage of the MBS | |
| Context | configure qos shared-queue named-item queue number cbs number | |
| Tree | cbs | |
| Range | 0 to 100 | |
| Units | percent | |
| Introduced | 16.0.R1 | |
Platforms |
All |
drop-tail
| Synopsis | Enter the drop-tail context | |
| Context | configure qos shared-queue named-item queue number drop-tail | |
| Tree | drop-tail | |
| Introduced | 16.0.R1 | |
Platforms | All |
low
percent-reduction-from-mbs (number | keyword)
| Synopsis | Low drop-tail percent from MBS that is reduced | |
| Context | configure qos shared-queue named-item queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
| Tree | percent-reduction-from-mbs | |
| Range | 0 to 100 | |
| Options | ||
| Default | auto | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
mbs number
| Synopsis | Maximum buffers for the ingress shared queue | |
| Context | configure qos shared-queue named-item queue number mbs number | |
| Tree | mbs | |
| Range | 0 to 100 | |
| Units | percent | |
| Introduced | 16.0.R1 | |
Platforms |
All |
multipoint boolean
| Synopsis | Apply as a multicast queue | |
| Context | configure qos shared-queue named-item queue number multipoint boolean | |
| Tree | multipoint | |
| Introduced | 16.0.R1 | |
Platforms | All |
queue-type keyword
| Synopsis | Method used to service queue from hardware perspective | |
| Context | configure qos shared-queue named-item queue number queue-type keyword | |
| Tree | queue-type | |
| Options | ||
| Default | auto-expedited | |
| Introduced | 16.0.R1 | |
Platforms | All |
rate
| Synopsis | Enter the rate context | |
| Context | configure qos shared-queue named-item queue number rate | |
| Tree | rate | |
| Introduced | 16.0.R1 | |
Platforms | All |
cir number
fir number
pir number
slope-policy [slope-policy-name] named-item
| Synopsis | Enter the slope-policy list instance | |
| Context | configure qos slope-policy named-item | |
| Tree | slope-policy | |
| Max. instances | 511 | |
| Introduced | 16.0.R1 | |
Platforms | All |
[slope-policy-name] named-item
| Synopsis | Slope policy name | |
| Context | configure qos slope-policy named-item | |
| Tree | slope-policy | |
| String length | 1 to 32 | |
Notes | This element is part of a list key. | |
| Introduced | 16.0.R1 | |
Platforms | All |
description description
| Synopsis | Text description | |
| Context | configure qos slope-policy named-item description description | |
| Tree | description | |
| String length | 1 to 80 | |
| Introduced | 16.0.R1 | |
Platforms | All |
exceed-slope
| Synopsis | Enter the exceed-slope context | |
| Context | configure qos slope-policy named-item exceed-slope | |
| Tree | exceed-slope | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the exceed-priority RED slope | |
| Context | configure qos slope-policy named-item exceed-slope admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
max-avg number
| Synopsis | Buffer percentage after which drop probability is one | |
| Context | configure qos slope-policy named-item exceed-slope max-avg number | |
| Tree | max-avg | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
max-prob number
| Synopsis | Drop probability to increase at exceed start-average | |
| Context | configure qos slope-policy named-item exceed-slope max-prob number | |
| Tree | max-prob | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start-avg number
| Synopsis | Buffer percentage after which drop probability starts to rise above zero | |
| Context | configure qos slope-policy named-item exceed-slope start-avg number | |
| Tree | start-avg | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
high-slope
| Synopsis | Enter the high-slope context | |
| Context | configure qos slope-policy named-item high-slope | |
| Tree | high-slope | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the high priority RED slope | |
| Context | configure qos slope-policy named-item high-slope admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
max-avg number
| Synopsis | Buffer percentage after which drop probability is one | |
| Context | configure qos slope-policy named-item high-slope max-avg number | |
| Tree | max-avg | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
max-prob number
| Synopsis | Drop probability to increase at high start-average | |
| Context | configure qos slope-policy named-item high-slope max-prob number | |
| Tree | max-prob | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start-avg number
| Synopsis | Buffer percentage after which drop probability starts to rise above zero | |
| Context | configure qos slope-policy named-item high-slope start-avg number | |
| Tree | start-avg | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
highplus-slope
| Synopsis | Enter the highplus-slope context | |
| Context | configure qos slope-policy named-item highplus-slope | |
| Tree | highplus-slope | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the highplus priority RED slope | |
| Context | configure qos slope-policy named-item highplus-slope admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
max-avg number
| Synopsis | Buffer percentage after which drop probability is one | |
| Context | configure qos slope-policy named-item highplus-slope max-avg number | |
| Tree | max-avg | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
max-prob number
| Synopsis | Drop probability increase at highplus start-average | |
| Context | configure qos slope-policy named-item highplus-slope max-prob number | |
| Tree | max-prob | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start-avg number
| Synopsis | Buffer percentage after which drop probability starts to rise above zero | |
| Context | configure qos slope-policy named-item highplus-slope start-avg number | |
| Tree | start-avg | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
low-slope
| Synopsis | Enter the low-slope context | |
| Context | configure qos slope-policy named-item low-slope | |
| Tree | low-slope | |
| Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
| Synopsis | Administrative state of the low priority RED slope | |
| Context | configure qos slope-policy named-item low-slope admin-state keyword | |
| Tree | admin-state | |
| Options | ||
| Introduced | 16.0.R1 | |
Platforms |
All |
max-avg number
| Synopsis | Buffer percentage after which drop probability is one | |
| Context | configure qos slope-policy named-item low-slope max-avg number | |
| Tree | max-avg | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
max-prob number
| Synopsis | Drop probability to increase at low start-average | |
| Context | configure qos slope-policy named-item low-slope max-prob number | |
| Tree | max-prob | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
start-avg number
| Synopsis | Buffer percentage after which drop probability starts to rise above zero | |
| Context | configure qos slope-policy named-item low-slope start-avg number | |
| Tree | start-avg | |
| Range | 0 to 100 | |
| Introduced | 16.0.R1 | |
|
Platforms | All |
time-average-factor number
| Synopsis | Weighting factor to calculate shared buffer utilization | |
| Context | configure qos slope-policy named-item time-average-factor number | |
| Tree | time-average-factor | |
| Range | 0 to 15 | |
| Default | 7 | |
| Introduced | 16.0.R1 | |
Platforms |
All |