b Commands

Context

[Tree] (show>mcast-management bandwidth-policy)

Full Context

show mcast-management bandwidth-policy

Description

This command displays multicast path management bandwidth policy information.

Parameters

policy-name

Specifies the bandwidth policy name, up to 32 characters.

detail

Displays detailed information.

Platforms

7450 ESS, 7750 SR-1x-48D, 7750 SR-1x-92S, 7750 SR-7/12/12e, 7750 SR-s, 7950 XRS, VSR

Output

The following output is an example of multicast management bandwidth policy information.

*A:PE-1# show mcast-management bandwidth-policy "default" detail
===============================================================================
Bandwidth Policy Details
===============================================================================
-------------------------------------------------------------------------------
Policy             : default
-------------------------------------------------------------------------------
Admin BW Thd       : 10 kbps            Falling Percent RST: 50
Mcast Pool Total   : 10                 Mcast Pool Resv Cbs: 50
Slope Policy       : default
Primary
Cbs                : 5.00               Mbs                : 7.00
Low Drop Tail      : 10
Secondary
Cbs                : 30.00              Mbs                : 40.00
Low Drop Tail      : 10                 Paths(Single/Dual) : 1/1
===============================================================================
Bandwidth Policies : 1
===============================================================================
*A:PE-1#

Context

[Tree] (show>service>id base)

Full Context

show service id base

Description

This command displays basic information about the service ID, including service type, description, SAPs, and SDPs.

Parameters

msap

Displays MSAPs.

Platforms

All

Output

The following output is an example of base service ID information, and Show Service-ID Base Output Fields describes the output fields.

*A:Dut-C>config>service>vpls#  show service  id 1 base 
===============================================================================
Service Basic Information
===============================================================================
Service Id        : 1                   Vpn Id            : 1
Service Type      : VPLS                
MACSec enabled    : no                  
Name              : 1
Description       : Vpls 1 - BgpVpls
Customer Id       : 1                   Creation Origin   : manual
Last Status Change: 01/19/2022 21:36:58 
Last Mgmt Change  : 01/19/2022 21:45:55 
Etree Mode        : Disabled            
Admin State       : Up                  Oper State        : Up
MTU               : 1400                
SAP Count         : 1                   SDP Bind Count    : 2
Snd Flush on Fail : Disabled            Host Conn Verify  : Disabled
SHCV pol IPv4     : None
Propagate MacFlush: Disabled            Per Svc Hashing   : Disabled
Allow IP Intf Bind: Disabled            
Fwd-IPv4-Mcast-To*: Disabled            Fwd-IPv6-Mcast-To*: Disabled
Mcast IPv6 scope  : mac-based           
Def. Gateway IP   : None                
Def. Gateway MAC  : None                
Temp Flood Time   : Disabled            Temp Flood        : Inactive
Temp Flood Chg Cnt: 0                   
SPI load-balance  : Disabled            
TEID load-balance : Disabled            
Lbl Eth/IP L4 TEID: Disabled            
Src Tep IP        : N/A                 
Vxlan ECMP        : Disabled            
MPLS ECMP         : Disabled            
Ignore MTU Mismat*: Enabled             
 
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier                               Type         AdmMTU  OprMTU  Adm  Opr
-------------------------------------------------------------------------------
sap:1/1/4:1                              q-tag        1518    1518    Up   Up
sdp:32766:4294967292 SB(10.20.1.6)       BgpVpls      0       1492    Up   Up
sdp:32767:4294967295 SB(10.20.1.1)       BgpVpls      0       1492    Up   Up
===============================================================================
* indicates that the corresponding row element may have been truncated.

# show service id 2000 base 
 
===============================================================================
Service Basic Information
===============================================================================
<snip>
 
Router Oper State : Up                  
Route Dist.       : auto-rd             VPRN Type         : regular
Oper Route Dist   : 192.0.2.3:64000
Oper RD Type      : auto                
AS Number         : None                Router Id         : 192.0.2.3
ECMP              : Enabled             ECMP Max Routes   : 1
Max IPv4 Routes   : No Limit            
Local Rt Domain-id: 65000:1

Context

[Tree] (show>service>id>mld-snooping base)

Full Context

show service id mld-snooping base

Description

This command displays basic MLD snooping information.

Platforms

All

Context

[Tree] (show>service>id>spb base)

Full Context

show service id spb base

Description

This command displays SPB base information.

Platforms

All

Output

The following output is an example of service SPB base information.

*A:Dut-A# show service id 100001 spb base
===============================================================================
Service SPB Information
===============================================================================
Admin State        : Up                 Oper State         : Up
ISIS Instance      : 1024               FID                : 1
Bridge Priority    : 8                  Fwd Tree Top Ucast : spf
Fwd Tree Top Mcast : st
Bridge Id          : 80:00.00:10:00:01:00:01
Mcast Desig Bridge : 80:00.00:10:00:01:00:01

===============================================================================
ISIS Interfaces
===============================================================================
Interface                        Level CircID  Oper State   L1/L2 Metric
-------------------------------------------------------------------------------
sap:1/2/2:1.1                    L1    65536   Up           10/-
sap:1/2/3:1.1                    L1    65537   Up           10/-
-------------------------------------------------------------------------------
Interfaces : 2
===============================================================================
FID ranges using ECT Algorithm
-------------------------------------------------------------------------------
1-99      low-path-id
100-100   high-path-id
101-4095  low-path-id
===============================================================================

Context

[Tree] (show>router>srv6 base-routing-instance)

Full Context

show router segment-routing-v6 base-routing-instance

Description

This command displays SRv6 Base routing instances.

Parameters

locator-name

Specifies the locator or micro-segment locator name, up to 64 characters.

end-x

Displays the End.X SID function associated with a P2P interface.

end-dt4

Displays the End.DT4 function associated with the Base routing instance.

end-dt6

Displays the End.DT6 function associated with the Base routing instance.

end-dt46

Displays the End.DT46 function associated with the Base routing instance.

end

Displays the End SID function of a locator.

ua

Displays the uA SID function associated with a P2P interface.

udt4

Displays the uDT4 function associated with the Base routing instance.

udt6

Displays the uDT6 function associated with the Base routing instance.

udt46

Displays the uDT46 function associated with the Base routing instance.

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

Context

[Tree] (show>qos bcg)

Full Context

show qos bcg

Description

The show qos bcg command outputs the current and historical visitation time associated with the specified BCG name.

A Burst Control Group (BCG) represents a list of queues that share the same non-scheduling PIR and CIR bucket target update interval. When a queue’s scheduled rate bursts above its PIR bucket depth, the queue is removed from its scheduling context. The system uses a BCG in order to visit the queues PIR bucket to periodically drain an appropriate amount from the bucket. When the bucket has been drained below the PIR bucket threshold, the queue is allowed back onto its scheduling context. The amount decremented from the bucket is a function of the amount of time that has elapsed since the last bucket update and the queue’s shaping rate (PIR). If the queue’s shaping rate is configured as 1 Mb/s and 1 ms has elapsed since the last bucket update, the system decrements the PIR bucket by 125 bytes. One caveat is that the bucket cannot be decremented past a depth of 0. This fact drives how the system chooses which BCG is used to manage the queue bucket update interval.

If a queue’s shaping rate is 1 Mb/s and the threshold (burst limit) is set to 10 kbytes, the maximum amount of time that can expire before the queue is updated without resulting in a negative bucket depth is 81.92 ms. This can be calculated by taking the number of bits represented by the bucket depth (10 kbytes = 10 * 1,024 * 8 = 81,920 bits) and dividing it by the rate (81,920 bits / 1,000,000 bits per second = 81.92 ms). The queue is not removed from the scheduler until the PIR bucket depth has equaled or exceeded the configured burst threshold, so the bucket is at least 10 kbytes deep. If the system visits the queue PIR bucket within 81.92 ms, the resulting decrement operation leaves the bucket. If the system takes longer than 81.92 ms, the decrement result will be greater than 10 kbytes and part of the decrement result is lost. The net result is that, because of less than timely updates, the queue will not be returned to the scheduler context fast enough and some shaping bandwidth for the queue will be lost (underrun the shaping rate).

Each FP2- and FP3-based Q-chip maintains eight BCGs, each targeting a certain queue bucket visitation time. A 1 s, 40 ms, 20 ms, 10 ms, 5 ms, 1 ms, 500 µs, and 100 µs BCG is supported. An FP4- or FP5-based Q-chip has an additional four BCGs with target visitation times of 50 μs, 10 μs, 5 μs, and 1 μs. By default, queues are placed in a BCG based on shaping rate and the queue’s burst limit (PIR threshold depth) is set based on the BCG visitation time and the queue’s specified shaping rate.

When explicit burst-limit threshold values are defined for a shaping queue, the system picks an appropriate BCG based on the queue’s configured shaping rate and the explicit threshold to find a BCG with the best target visitation time that results in worst-case decrement values that are less than the configured threshold. However, when a queue is placed on a 'faster’ BCG, more visitation resources are consumed and it is possible that the system will not meet a queue’s decrement constraints.

The show qos bcg command allows visibility into a BCG’s historic and current visitation time. The system samples the amount of time it takes each list to visit each of its associated queues once each second and stores the last 10 samples. It also keeps the longest visitation time seen since the last time the BCG statistics were cleared, the longest visitation time for the current queue-to-BCG lists associations, calculated longest visitation time based on maximum scheduling bandwidth, and the longest visitation time for an optionally defined scheduling rate.

With each sample, the system indirectly calculates the amount of scheduling bandwidth based on how many Q-chip resources were diverted from BCG visitation processing. This calculated scheduling bandwidth is used to evaluate the worst-case visitation times for each BCG. The calculated scheduling bandwidth value is stored with the longest-seen-visitation time and the longest-seen-visitation time with the current queue-to-BCG mappings. This is not applicable to an FP4- or FP5-based Q-chip, so the exp-util-bw parameter is not applicable to an FP4- or FP5-based Q-chip.

Parameters

Burst-Control-Group-name

Specifies which globally unique Burst Control Group to display. If the specified Burst Control Group does not exist, the show command will fail.

Values

<slot>/<fp>-< target-visitation-time>[-<direction>]

slot - 1 to 20

fp - 1 to 8

target-visitation-time -1 μs, 5 μs, 10 μs, 50 μs, 100 μs, 500 μs, 1ms, 5ms, 10ms, 20ms, 40ms, 1s

direction - i, e

member-queues

Includes a list of all queues attached to the specified burst-control-group-name. The 100% scheduling bandwidth used in the 'at-risk’ determination may be overridden with a specified scheduling bandwidth by using the exp-util-bw parameter. When the member-queues parameter is specified, the output includes a single-entry summary of the internal queues.

exp-util-bw mega-bits-per-second

Displays a calculated worst-case visitation rate for the specified BCG name based on the specified value of megabits-persecond which also modifies the member queue’s 'at-risk’ state output. This parameter is not applicable to FP4- or FP5-based hardware which has dedicated internal resources for handling BCG visitations and is unaffected by scheduling bandwidth.

Values

0 to 4294967

port port-id

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified port-id. If the specified port-id does not exist, the show command will fail.

Values

Up to 17 characters

sap sap-id

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified sap-id. If the specified sap-id does not exist, the show command will fail.

Values

Up to 64 characters

subscriber sub-ident

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified sub-ident. If the specified sub-ident does not exist, the show command will fail.

Values

Up to 32 characters

access-queue-grp queue-group-name

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues within the specified queue-group-name. If the specified queue-group-name is not found, the show command will fail.

Values

Up to 32 characters

service service-id

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified service-id. If the specified service-id does not exist, the show command will fail.

Values

1 to 2147483647

card-slot-number

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for all queues associated with the specified card-slot-number. If the specified card-slot-number does not exist, the show command will fail.

Values

1 to 40

[ingress | egress]

The ingress and egress keywords specify the direction to display and are mutually exclusive.

Platforms

All

Context

[Tree] (show>subscr-mgmt>vrgw>lanext bd)

Full Context

show subscriber-mgmt vrgw lanext bd

Description

This command displays information for the specified HLE bridge. If no bridge is specified, then all domains are listed.

Parameters

bridge-id

Specifies the BD ID.

Values

1 to 4294967295

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of HLE bridge information.

show subscriber-mgmt vrgw lanext bd 100
===============================================================================
BRIDGE DOMAIN(S)
===============================================================================
BRIDGE-ID                    : 100
VNI                          : 1
ROUTE TARGET                 : TARGET:100:100
ROUTE DISTINGUISHER          : 100:100
WLANGW GRPID                 : 1
ISA MEMBERID                 : 1
WLANGW BD VLANTAG            : N/A
WLANGW BD SERVICE            : 500
WLANGW BD INTERFACE          : G1
WLANGW BD MAC TRANSLATION    : N/A
WLANGW BD MAC                : AA:BB:CC:00:00:01
WLANGW BD ASSIST.ADDR.RES    : DISABLED
WLANGW BD NETW MAXMAC        : 20
WLANGW BD NETW STATE         : ENABLED
WLANGW BD ACCS MAXMAC        : 20
-------------------------------------------------------------------------------
NO. OF BRIDGE DOMAINS: 1
===============================================================================

Context

[Tree] (tools>perform>wlan-gw>lanext bd)

[Tree] (tools>dump>wlan-gw>lanext bd)

Full Context

tools perform wlan-gw lanext bd

tools dump wlan-gw lanext bd

Description

Commands in this context enter the specified HLE BD to perform tools commands.

Parameters

bridge-id

Specifies the HLE BD ID.

Values

1 to 4294967295

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

Context

[Tree] (tools>dump>router bfd)

Full Context

tools dump router bfd

Description

Commands in this context dump LSP-BFD information for LDP and RSVP LSPs.

Platforms

All

Context

[Tree] (show>router bfd)

Full Context

show router bfd

Description

Commands in this context display bidirectional forwarding detection (BFD) information.

Platforms

All

Context

[Tree] (clear>router bfd)

Full Context

clear router bfd

Description

Commands in this context clear bidirectional forwarding (BFD) sessions and statistics.

Platforms

All

Context

[Tree] (show>lag bfd)

Full Context

show lag bfd

Description

This command displays per-member BFD information.

Platforms

All

Context

[Tree] (show>router>bfd bfd-template)

Full Context

show router bfd bfd-template

Description

This command displays BFD template information.

Parameters

template-name

Displays the BFD template name, up to 32 characters.

Platforms

All

Output

The following output is an example of BFD template information.

A:node-2# show router bfd bfd-template "privatebed-bfd-template"
 
===============================================================================
BFD Template privatebed-bfd-template
===============================================================================
Template Name           : privatebed-* Template Type             : cpmNp
Transmit Timer          : 10 msec      Receive Timer             : 10 msec
CV Transmit Interval    : 1000 msec
Template Multiplier     : 3            Echo Receive Interval     : 100 msec
 
Mpls-tp Association
privatebed-oam-template
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:mlstp-dutA# show router bfd session
 
===============================================================================
BFD Session
===============================================================================
Interface/Lsp Name            State                 Tx Intvl  Rx Intvl  Multipl
  Remote Address/Info         Protocols             Tx Pkts   Rx Pkts   Type
-------------------------------------------------------------------------------
wp::lsp-32                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-33                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-34                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-35                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-36                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-37                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-38                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-39                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-40                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
wp::lsp-41                    Down (1)              1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-32                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-33                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-34                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-35                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-36                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-37                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-38                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-39                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-40                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
pp::lsp-41                    Up (3)                1000      1000      3
    0::0.0.0.0                mplsTp                N/A       N/A       cpm-np
-------------------------------------------------------------------------------
No. of BFD sessions: 20
-------------------------------------------------------------------------------
wp = Working path   pp = Protecting path
===============================================================================

A:node-2# show router bfd bfd-template "privatebed-bfd-template"
===============================================================================
BFD Template privatebed-bfd-template
===============================================================================
Template Name           : privatebed-* Template Type             : cpmNp
Transmit Timer          : 10 msec      Receive Timer             : 10 msec
CV Transmit Interval    : 1000 msec
Template Multiplier     : 3            Echo Receive Interval     : 100 msec
 
Mpls-tp Association
privatebed-oam-template
===============================================================================
* indicates that the corresponding row element may have been truncated.

Context

[Tree] (tools>dump>router>ldp>lsp-bfd bfd-templates-in-use)

Full Context

tools dump router ldp lsp-bfd bfd-templates-in-use

Description

This command indicates the named BFD templates that are configured for use by LSP BFD for LDP.

Platforms

All

Context

[Tree] (show>service>id bgp)

Full Context

show service id bgp

Description

This command displays BGP-related information for the service.

Parameters

bgp-instance

Specifies the ID value for the BGP instance.

Values

1, 2

Platforms

All

Output

The following output is an example of BGP-related information, and Output Fields: Service BGP describes the output fields.

*A:PE-2>config>service>vpls$ /show service id 1985 bgp 
===============================================================================
BGP Information
===============================================================================
Vsi-Import           : None
Vsi-Export           : vsi-exp1
Route Dist           : None
Oper Route Dist      : 0:0
Oper RD Type         : none                 
Rte-Target Import    : 64500:1985           Rte-Target Export: None
Oper RT Imp Origin   : configured           Oper RT Import   : 64500:1985
Oper RT Exp Origin   : vsi                  Oper RT Export   : Policy Based
PW-Template Id       : None                 
ADV Service MTU      : 1450 
PW-Template Id       : None

-------------------------------------------------------------------------------
===============================================================================

Context

[Tree] (clear>router bgp)

Full Context

clear router bgp

Description

This command clears or resets the route damping information for received routes.

Platforms

All

Context

[Tree] (show>router bgp)

Full Context

show router bgp

Description

Commands in this context display BGP related information.

Platforms

All

Context

[Tree] (show>router>seg-rt>sr-policies bgp)

Full Context

show router segment-routing sr-policies bgp

Description

This command displays the traffic statistics of all or a filtered set of the BGP policies, or displays summary parameters.

Parameters

color

Filters on the color.

Values

0 to 4294967295

ipv4-address | ipv6-address

Filters on the end-point IPv4 or IPv6 address.

Values

ipv4-address — a.b.c.d

ipv6-address — x:x:x:x:x:x:x:x (eight 16-bit pieces) or x:x:x:x:x:x:d:d:d:d

x — [0 to FFFF]H

d — [0 to 255]D

preference-id

Filters on the preference ID.

Values

0 to 4294967295

distinguisher-id

Filters on the distinguisher ID.

Values

0 to 4294967295

summary

Displays the summary information for the BGP policies.

Platforms

All

Output

The following outputs are examples of traffic statistics for the BGP policies.

 *A:Dut-C# show router segment-routing sr-policies bgp    
===============================================================================
SR-Policies Path
===============================================================================
-------------------------------------------------------------------------------
Type            : srv6                  
Active          : No                    Owner           : bgp
Color           : 50                    
Head            : 0.0.0.0               Endpoint Addr   : 3ffe::a14:102
RD              : 5                     Preference      : 14
SRv6 BSID 1     : 1111:1:1:1:0:b::
TunnelId        : 917511                Age             : 0
Origin ASN      : 2                     Origin          : 3ffe::a14:102
NumReEval       : 7                     ReEvalReason    : tunnel-down
NumActPathChange: 0                     Last Change     : 06/13/2022 17:45:57
Maintenance Policy: N/A
 
Path Segment Lists:
Segment-List    : 1                     Weight          : 1
S-BFD State     : Down                  S-BFD Transitio*: 0
Num Segments    : 2                     Last Change     : 06/10/2022 17:07:01
  Seg 1 SID   : 3333:3:3:3:0:a::                         State : resolved-up
  Seg 2 SID   : 2222:2:2:2:0:a::                         State : N/A
 
===============================================================================
* indicates that the corresponding row element may have been truncated.

*A:Dut-C# show router segment-routing sr-policies bgp end-point 3ffe::a14:102    
===============================================================================
SR-Policies Path
===============================================================================
-------------------------------------------------------------------------------
Type            : srv6                  
Active          : No                    Owner           : bgp
Color           : 50                    
Head            : 0.0.0.0               Endpoint Addr   : 3ffe::a14:102
RD              : 5                     Preference      : 14
SRv6 BSID 1     : 1111:1:1:1:0:b::
TunnelId        : 917511                Age             : 0
Origin ASN      : 2                     Origin          : 3ffe::a14:102
NumReEval       : 2                     ReEvalReason    : tunnel-down
NumActPathChange: 0                     Last Change     : 06/13/2022 17:45:57
Maintenance Policy: N/A
 
Path Segment Lists:
Segment-List    : 1                     Weight          : 1
S-BFD State     : Down                  S-BFD Transitio*: 0
Num Segments    : 2                     Last Change     : 06/10/2022 17:07:01
  Seg 1 SID   : 3333:3:3:3:0:a::                         State : resolved-up
  Seg 2 SID   : 2222:2:2:2:0:a::                         State : N/A
 
===============================================================================
* indicates that the corresponding row element may have been truncated.

Context

[Tree] (monitor>router bgp)

Full Context

monitor router bgp

Description

This command monitors commands for the BGP instance.

Platforms

All

Context

[Tree] (show>service>system bgp-auto-rd)

Full Context

show service system bgp-auto-rd

Description

This command displays BGP auto route distinguisher (RD) information.

Platforms

All

Output

The following shows an example of BGP auto route distinguisher (RD) information

*A:Dut#show service system bgp-auto-rd 
=======================================================================
Service BGP Auto Route Distinguisher Information
=======================================================================
IP address         : 192.0.2.69                   
Comm Val Start     : 1200                         End           : 1300
In Use             : 1                            
=======================================================================

Context

[Tree] (show>service>id bgp-evpn)

Full Context

show service id bgp-evpn

Description

This command displays the bgp-evpn configured parameters for a specified service, including the administrative status of VXLAN, the configuration for mac-advertisement and unknown-mac-route, as well as the mac-duplication parameters. The command displays the duplicate MAC addresses that mac-duplication has detected.

This command also displays whether the ip-route-advertisement command (and the incl-host parameter) is enabled. If the service is BGP-EVPN MPLS, the command also displays the parameters corresponding to EVPN-MPLS.

Parameters

instance-id

Filters on the instance ID.

Values

1 to 2

Platforms

All

Output

The following output is an example of BGP EVPN information and Output Fields: Service BGP-EVPN describes the output fields.

show service id 100 bgp-evpn

===============================================================================
BGP EVPN Table
===============================================================================
EVI                : 100                Creation Origin    : manual

-------------------------------------------------------------------------------
Local AC Name              Eth Tag  Endpoint                    Ingress Label
-------------------------------------------------------------------------------
mpls                       1        mpls                        0
srv6                       1        srv6                        0
-------------------------------------------------------------------------------
Number of local ACs : 2

-------------------------------------------------------------------------------
Remote AC Name                     Eth Tag  Endpoint
-------------------------------------------------------------------------------
mpls                               1        mpls
srv6                               1        srv6
-------------------------------------------------------------------------------
Number of Remote ACs : 2
===============================================================================

===============================================================================
BGP EVPN MPLS Information
===============================================================================
Admin Status       : Enabled            Bgp Instance       : 1
Force Vlan Fwding  : Disabled           
Force Qinq Fwding  : none               
Route NextHop Type : system-ipv4        
Control Word       : Disabled           
Max Ecmp Routes    : 2                  
Entropy Label      : Disabled           
Default Route Tag  : none               
Oper Group         :                    
MH Mode            : network            
Domain-Id          : 64500:1            
Evi 3-byte Auto-RT : Disabled           
Dyn Egr Lbl Limit  : Disabled           
Hash Label         : Disabled           
-------------------------------------------------------------------------------
===============================================================================

===============================================================================
BGP EVPN MPLS Auto Bind Tunnel Information
===============================================================================
Allow-Flex-Algo-Fallback  : false              
Resolution                : any                Strict Tnl Tag   : false
Max Ecmp Routes           : 1                  
Bgp Instance              : 1                  Untagged Route   : none
Filter Tunnel Types       : (Not Specified)
Weighted Ecmp             : false              
-------------------------------------------------------------------------------
===============================================================================

===============================================================================
Segment Routing v6 Instance 2 Service 100
===============================================================================
Admin State             : Enabled                 
Srv6 Instance           : 1                       
Default Locator         : LOC-2-16bits

Oper Group              : (Not Specified)
Default Route Tag       : 0x0                     
Source Address          : 2001:db8::3
ECMP                    : 1                       
Force Vlan VC Fwd       : disabled                
Next Hop Type           : system-ipv4             
Evi 3-byte Auto-RT      : disabled                
Route Resolution        : route-table
Force QinQ VC Fwd       : none                    
MH Mode                 : access                  
Domain-Id               : 64500:2                 
=============================================================================== 

show service id 110 bgp-evpn 

===============================================================================
BGP EVPN Table
===============================================================================
EVI                : 110                
Creation Origin    : manual             
 
Adv L2 Attributes  : Enabled            
Ignore Mtu Mismatch: Disabled           
 
MAC/IP Routes
MAC Advertisement  : Enabled            Unknown MAC Route  : Disabled
CFM MAC Advertise  : Disabled           
ARP/ND Ext Comm Adv: Disabled           
 
Multicast Routes
Sel Mcast Advert   : Disabled           
Ing Rep Inc McastAd: Enabled            
 
IP Prefix Routes
IP Route Advert    : Disabled           
 
MAC Duplication Detection
Num. Moves         : 5                  Window             : 3
Retry              : 9                  Number of Dup MACs : 0
Black Hole         : Disabled           

-------------------------------------------------------------------------------
Detected Duplicate MAC Addresses             Time Detected
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
===============================================================================

-------------------------------------------------------------------------------
Locally Trusted MAC
-------------------------------------------------------------------------------
MAC Address                                  Time Detected
-------------------------------------------------------------------------------
00:de:ad:be:ef:04                            04/11/2023 12:59:01
-------------------------------------------------------------------------------

===============================================================================
BGP EVPN MPLS Information
===============================================================================
Admin Status       : Enabled            Bgp Instance       : 1
Force Vlan Fwding  : Disabled           
Force Qinq Fwding  : none               
Route NextHop Type : explicit           
NextHop Addr       : 2001:db8::3        
Control Word       : Enabled            
Max Ecmp Routes    : 1                  
Entropy Label      : Disabled           
Default Route Tag  : none               
Split Horizon Group: (Not Specified)  
Ingress Rep BUM Lbl: Enabled            
Ingress Ucast Lbl  : 524254             Ingress Mcast Lbl  : 524250
RestProtSrcMacAct  : none               
Evpn Mpls Encap    : Enabled            Evpn MplsoUdp      : Disabled
Oper Group         :                    
MH Mode            : network            
Evi 3-byte Auto-RT : Disabled           
Dyn Egr Lbl Limit  : Disabled           
-------------------------------------------------------------------------------
===============================================================================

===============================================================================
BGP EVPN MPLS Auto Bind Tunnel Information
===============================================================================
Allow-Flex-Algo-Fallback  : false              
Resolution                : any                Strict Tnl Tag   : false
Max Ecmp Routes           : 1                  
Bgp Instance              : 1                  
Filter Tunnel Types       : (Not Specified)
Weighted Ecmp             : false              
-------------------------------------------------------------------------------
===============================================================================

Context

[Tree] (show>service>system bgp-evpn)

Full Context

show service system bgp-evpn

Description

This command displays all the information related to the base EVPN instance, including the base RD used for Ethernet Segment (ES) routes, the ESs or individual ES information.

Parameters

ethernet-segment

Displays information for ES.

name

Specifies the name of an ES, up to 32 characters.

all

Displays all available information for the specified ES.

evi

Displays information for the specified EVI.

Values

1 to 65535

isid

Displays information for the specified ISID.

Values

1 to 16777215

Platforms

All

Output

The following output is an example of service system BGP EVPN information, and BGP EVPN Output Fields describes the output fields.

*A:PE-3# show service system bgp-evpn                               
===============================================================================
System BGP EVPN Information
===============================================================================
Eth Seg Route Dist.               : <none>
Eth Seg Oper Route Dist.          : 192.0.2.3:0
Eth Seg Oper Route Dist Type      : default
Ad Per ES Route Target            : evi-rt
EVI RT set Route Dist.            : 1.2.3.6:1 - 1.2.3.6:512
Extended Evi Range                : Disabled
Leaf Label                        : 524259
Alloc Leaf Label                  : Enabled
Leaf Label Value                  : dynamic
Mcast Leave Sync Prop             : 5
Attribute Uniform Prop            : Enabled
BGP Path Selection                : Enabled
===============================================================================

*A:PE1# show service system bgp-evpn ethernet-segment 
===============================================================================
Service Ethernet Segment
===============================================================================
Name                             ESI                           Admin     Oper
-------------------------------------------------------------------------------
ESI-71                           01:00:00:00:00:71:00:00:00:01 Enabled   Up
-------------------------------------------------------------------------------
Entries found: 1
===============================================================================

*A:PE1# show service system bgp-evpn ethernet-segment name "ESI-71" all 
===============================================================================
Service Ethernet Segment
===============================================================================
Name                    : ESI-71
Admin State             : Enabled            Oper State         : Up
ESI                     : 01:00:00:00:00:71:00:00:00:01
Multi-homing            : allActive          Oper Multi-homing  : allActive
Source BMAC LSB         : 71-71              
ES BMac Tbl Size        : 8                  ES BMac Entries    : 1
Lag Id                  : 1                  
ES Activation Timer     : 0 secs             
Exp/Imp Route-Target    : target:00:00:00:00:71:00

Svc Carving             : auto               
ES SHG Label            : 262142             
===============================================================================

===============================================================================
EVI Information 
===============================================================================
EVI                 SvcId               Actv Timer Rem      DF
-------------------------------------------------------------------------------
1                   1                   0                   no
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
-------------------------------------------------------------------------------
DF Candidate list
-------------------------------------------------------------------------------
EVI                                     DF Address
-------------------------------------------------------------------------------
1                                       192.0.2.69
1                                       192.0.2.72
-------------------------------------------------------------------------------
Number of entries: 2
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
                                      
===============================================================================
ISID Information 
===============================================================================
ISID                SvcId               Actv Timer Rem      DF
-------------------------------------------------------------------------------
20001               20001               0                   no
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
-------------------------------------------------------------------------------
DF Candidate list
-------------------------------------------------------------------------------
ISID                                    DF Address
-------------------------------------------------------------------------------
20001                                   192.0.2.69
20001                                   192.0.2.72
-------------------------------------------------------------------------------
Number of entries: 2
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
===============================================================================
BMAC Information 
===============================================================================
SvcId                                   BMacAddress
-------------------------------------------------------------------------------
20000                                   00:00:00:00:71:71
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================

Context

[Tree] (tools>dump>service>system bgp-evpn)

Full Context

tools dump service system bgp-evpn

Description

Commands in this context display information about the BGP-EVPN base instance.

Platforms

All

Context

[Tree] (show>redundancy bgp-evpn-multi-homing)

Full Context

show redundancy bgp-evpn-multi-homing

Description

This command shows the information related to the EVPN global timers.

Platforms

All

Output

*A:PE2# show redundancy bgp-evpn-multi-homing 
===============================================================================
Redundancy BGP EVPN Multi-homing Information
===============================================================================
Boot-Timer              : 10 secs                 
Boot-Timer Remaining    : 0 secs                  
ES Activation Timer     : 3 secs                  
===============================================================================

Context

[Tree] (show>service>id bgp-ipvpn)

Full Context

show service id bgp-ipvpn

Description

This command displays the BGP IPVPN configured parameters for a specified service.

Platforms

All

Output

The following output is an example of BGP IPVPN information, and BGP IPVPN Output Fields describes the output fields.

# show service id 2000 bgp-ipvpn 
 
===============================================================================
Service 2000 BGP-IPVPN MPLS Information
===============================================================================
Admin State       : Up                  
VRF Import        : None
VRF Export        : None
Route Dist.       : 0:0                 
Oper Route Dist   : 192.0.2.3:64000
Oper RD Type      : auto                
Route Target      : None
Route Target Impor: None
Route Target Expor: None
D-Path Domain-Id  : 65000:1
<snip>

Context

[Tree] (show>router>bgp>routes bgp-ls)

Full Context

show router bgp routes bgp-ls

Description

This command displays BGP-Link State (BGP-LS) routes.

Parameters

hunt

Displays detailed information about the routes, including information about the advertised routes (RIB-OUT).

node

Displays BGP-LS link NLRI routes.

link

Displays BGP-LS node NLRI routes.

ipv4-prefix

Displays BGP-LS IPv4-prefix NLRI routes.

ipv4-prefix/prefix-length

Displays the entries matching the specified IPv4 prefix and length.

Values

ipv4-prefix:	a.b.c.d (host bits must be 0)
ipv4-prefix-length:	0 to 32

Platforms

All

Output

The following outputs are examples of information displayed by the bgp-ls command.

# show router bgp routes bgp-ls 
====================================================================
BGP-LS NLRIs
====================================================================
--------------------------------------------------------------------
Type: Node 
Protocol: ISIS | OSPFLevel: L1 | L2 | NA
Identifier: 
Network : 215.0.0.0/24
Nexthop : 202.50.0.2
Path Id : None
From : 10.255.105.141
AS Path: 65534
Local Node
   Name:
   Autonomous System: 
   Area ID:
   Rtr ID:
   Flags:
Type: Link
Protocol: ISIS | OSPFLevel: L1 | L2 | NA
Identifier: 
Network : 215.0.0.0/24
Nexthop : 202.50.0.2
Path Id : None
From : 10.255.105.141
AS Path: 65534
Local Node
   Name:    
   Autonomous System: 
   Area ID:
   Rtr ID:
Remote Node
   Name:
   Autonomous System: 
   Area ID:
   Rtr ID:
Descriptor
   IPv4 Address: 10.10.1.1
Attributes
   Flags:
   IGP Metric: 1000
   Admin-Grp: 0
   Maximum Link BW (kbps): 100000
   Maximum Reservable BW (kbps): 100000
   TE Default Metric: 1000
   Unreserved BW (kbps): 10000
   
Type: IPv4 Prefix 
Protocol: ISIS | OSPFLevel: L1 | L2 | NA
Identifier: 
Network : 215.0.0.0/24
Nexthop : 202.50.0.2
Path Id : None
From : 10.255.105.141
AS Path: 65534
Local Node
   Name:
   Autonomous System: 
   Area ID: 0.0.0.0
   Rtr ID: 10.20.1.6
   Flags:
Prefix descriptor
   IPv4 Address: 10.20.1.6
   Prefix-len: 32
   MT_ID :0
   Route Type :Unknown

# show router bgp routes bgp-ls hunt link
===============================================================================
 BGP Router ID:38.120.48.226    AS:65000       Local AS:65000
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
                 l - leaked, x - stale, > - best, b - backup, p - purge
 Origin codes  : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP-LS Link NLRIs
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network:
 Type          : LINK-NLRI
 Protocol      : ISIS Level-2           Identifier     : 0xa
 Local Node descriptor:
  Autonomous System  : 0.0.253.232
  Link State Id      : 10
  IGP Router Id      : 0x38120048184
 Remote Node descriptor:
  Autonomous System  : 0.0.253.232
  Link State Id      : 10
  IGP Router Id      : 0x38120048223
 Link descriptor:
  IPV4 Interface Addr: 10.0.14.184
  IPV4 Neighbor Addr : 10.0.14.223
Nexthop        : 38.120.48.199
From           : 38.120.48.199
Res. Nexthop   : 0.0.0.0
Local Pref.    : 100                    Interface Name : NotAvailable
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : None
AIGP Metric    : None
Connector      : None
Community      : No Community Members
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 38.120.48.199
Flags          : Valid  Best  IGP
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0
Neighbor-AS    : N/A
Orig Validation: N/A
Source Class   : 0                      Dest Class     : 0
Add Paths Send : Default
Last Modified  : 02h27m50s
-------------------------------------------------------------------------------
Link State Attribute TLVs :
 Administrative group (color) : 0x0
 Maximum link bandwidth : 100000 Kbps
 Max. reservable link bandwidth : 100000 Kbps
 Unreserved bandwidth0 : 100000 Kbps
 Unreserved bandwidth1 : 100000 Kbps
 Unreserved bandwidth2 : 100000 Kbps
 Unreserved bandwidth3 : 100000 Kbps
 Unreserved bandwidth4 : 100000 Kbps
 Unreserved bandwidth5 : 100000 Kbps
 Unreserved bandwidth6 : 100000 Kbps
 Unreserved bandwidth7 : 100000 Kbps
 TE Default Metric : 100
 IGP Metric : 100
 Adjacency Segment Identifier (Adj-SID) :       flags 0x30 weight 0 sid 262136
-------------------------------------------------------------------------------
Network:
 Type          : LINK-NLRI
 Protocol      : ISIS Level-2           Identifier     : 0xa
 Local Node descriptor:
  Autonomous System  : 0.0.253.232
  Link State Id      : 10
  IGP Router Id      : 0x38120048184
 Remote Node descriptor:
  Autonomous System  : 0.0.253.232
  Link State Id      : 10
  IGP Router Id      : 0x38120048223
 Link descriptor:
  IPV4 Interface Addr: 10.0.14.184
  IPV4 Neighbor Addr : 10.0.14.223
Nexthop        : 38.120.48.221
From           : 38.120.48.221
Res. Nexthop   : 0.0.0.0
Local Pref.    : 100                    Interface Name : NotAvailable
Aggregator AS  : None                   Aggregator     : None
Atomic Aggr.   : Not Atomic             MED            : None
AIGP Metric    : None
Connector      : None
Community      : No Community Members
Cluster        : No Cluster Members
Originator Id  : None                   Peer Router Id : 38.120.48.221
Flags          : Valid  IGP
TieBreakReason : OriginatorID
Route Source   : Internal
AS-Path        : No As-Path
Route Tag      : 0
Neighbor-AS    : N/A
Orig Validation: N/A
Source Class   : 0                      Dest Class     : 0
Add Paths Send : Default
Last Modified  : 02h27m54s
-------------------------------------------------------------------------------
Link State Attribute TLVs :
 Administrative group (color) : 0x0
 Maximum link bandwidth : 100000 Kbps
 Max. reservable link bandwidth : 100000 Kbps
 Unreserved bandwidth0 : 100000 Kbps
 Unreserved bandwidth1 : 100000 Kbps
 Unreserved bandwidth2 : 100000 Kbps
 Unreserved bandwidth3 : 100000 Kbps
 Unreserved bandwidth4 : 100000 Kbps
 Unreserved bandwidth5 : 100000 Kbps
 Unreserved bandwidth6 : 100000 Kbps
 Unreserved bandwidth7 : 100000 Kbps
 TE Default Metric : 100
 IGP Metric : 100
 Adjacency Segment Identifier (Adj-SID) :       flags 0x30 weight 0 sid 262136
---------------------------------------------

Context

[Tree] (show>redundancy bgp-multi-homing)

Full Context

show redundancy bgp-multi-homing

Description

This command displays BGP multi-homing information.

Platforms

All

Context

[Tree] (show>router>bgp>orr bgp-nh-info)

Full Context

show router bgp optimal-route-reflection bgp-nh-info

Description

This command displays the calculated IGP cost from a particular location ID to all prefixes containing BGP next-hop addresses.

Parameters

location-id

Specifies the ORR location identifier.

Values

1 to 16 (7750 SR-12, VSR)

1 to 255 (all other platforms)

ip-address

Specifies the IPv4 or IPv6 BGP next-hop address.

Values

ipv4-address:	a.b.c.d.
ipv6-address:	x:x:x:x:x:x:x:x (eight 16-bit pieces)
	x:x:x:x:x:x:d.d.d.d
	x: [0 to FFFF]H
	d: [0 to 255]D

Platforms

All

Output

The following table describes the command output fields for the show router bgp optimal-route-reflection bgp-nh-info command output.

*A:Dut-C# show router bgp optimal-route-reflection bgp-nh-info
===============================================================================
ORR BGP-NH Table (Router: Base)
===============================================================================
Location 1:
    Primary        : 1.1.1.1
    Secondary      : -
    Tertiary       : -
    Primary-ipv6   : 2001::1
    Secondary-ipv6 : -
    Tertiary-ipv6  : -
Age          : 00h00m00s
Spf wait     : 60
Initial wait : 5
Second wait  : 15
-------------------------------------------------------------------------------
Next Hop
   Loc    Dest-Prefix
                               DB-Source  Type         Proto     Metric    Pref
-------------------------------------------------------------------------------
10.0.0.10
    1     Unreachable
192.0.2.1
    1     Unreachable
-------------------------------------------------------------------------------
No. of BGP-NHs: 2
===============================================================================

Context

[Tree] (show>subscr-mgmt bgp-peering-policy)

Full Context

show subscriber-mgmt bgp-peering-policy

Description

This command displays BGP peering policy information.

Parameters

policy-name

Specifies the BPG peering policy name, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of BOF, and Show BGP peering policy fields describes the output fields.

show subscriber-mgmt bgp-peering-policy "bgp-policy-1"

===============================================================================
BGP Peering Policy: bgp-policy-1
===============================================================================
Description        : BGPv4 peering policy / single hop / bfd
IP address family
    IPv4           : Yes
    IPv6           : Yes
Advertise Inactive : Inherited          Aggregator id zero : Inherited
AS Override        : Inherited          Auth Key Chain     : Inherited
Authentication Key : Inherited
BFD Enable         : Enabled            Cluster Id         : Inherited
Connect Retry      : Inherited          Damping            : Inherited
Disable Client Ref*: Inherited          Disable Communities: Inherited
Disable FE Failover: Inherited          Hold Time          : Inherited
Keep Alive         : Inherited          Local Address      : 10.3.2.254
Local AS           : 65536              Local Preference   : Inherited
Loop Detect        : Inherited          MED Out            : Inherited
Min Route Advertis*: Inherited
Multihop           : Inherited          Next Hop Self      : Inherited
Passive            : Inherited          Peer AS            : 65536
Preference         : Inherited          Prefix Limit       : Inherited
Prefix Log Only    : Inherited          Prefix Threshold   : Inherited
Remove Private AS  : Inherited          TTL Security       : Inherited
Type               : Internal           Disable 4byte ASN  : Inherited
Export Policy      : None Specified / Inherited
Import Policy      : None Specified / Inherited
Last Mgmt Change   : 05/22/2023 14:35:03

-------------------------------------------------------------------------------
Prefix Limits Per Address Family
-------------------------------------------------------------------------------
Family         Limit          Idle Timeout   Threshold Log Only  Post Import
-------------------------------------------------------------------------------
ipv4           100            forever        90        Enabled   Disabled
ipv6           50             forever        90        Enabled   Disabled
-------------------------------------------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated. 

Context

[Tree] (show>service>system bgp-route-distinguisher)

Full Context

show service system bgp-route-distinguisher

Description

This command displays the BGP operational route distinguishers (RDs) used by all the BGP-enabled services in the system. The information can be filtered by service: VPRN, VPLS, or Epipe. The output can also be filtered to show only the relevant RD information related to services ( svc), or the EVPN Auto-Discovery routes (ad-evi-rt-set), or the system RDs (system).

Platforms

All

Output

The following output is an example of service BGP RD information.

Auto-rd                    <none>
Ethernet-segment           <none>
EVI RT Set RD Range        1.2.3.6:1-1.2.3.6:512               configured
// the above is the case when the "Extended Evi Range" is disabled.
// When enabled :it is "1.2.3.6:1-1.2.3.6:65535"

*A:PE-2# show service system bgp-route-distinguisher 
===============================================================================
Service Route Distinguishers
===============================================================================
Svc Id     Type  Oper Route-Distinguisher         Route-Distinguisher
-------------------------------------------------------------------------------
501        vprn  192.0.2.2:60000                  auto
800        vprn  192.0.2.2:60001                  auto
1          vpls  192.0.2.2:1                      configured
1          vpls  192.0.2.2:2                      configured
101        vpls  192.0.2.2:101                    configured
101        vpls  192.0.2.2:102                    configured
500        vpls  192.0.2.2:500                    derivedEvi
600        vpls  192.0.2.2:600                    derivedEvi
804        vpls  192.0.2.2:804                    derivedEvi
701        epipe 192.0.2.2:701                    derivedEvi
702        epipe 192.0.2.2:702                    derivedEvi
-------------------------------------------------------------------------------
Number of RD Entries: 11
===============================================================================
===============================================================================
Service System BGP Route Distinguisher Information
===============================================================================
                    Oper Route Distinguisher                        Type
-------------------------------------------------------------------------------
Auto-rd             192.0.2.2:60000-192.0.2.2:65000                 configured
Ethernet-segment    192.0.2.2:0                                     default
EVI RT Set RD Range 1.2.3.6:1-1.2.3.6:512                           configured
// the above is the case when the "Extended Evi Range" is disabled.
// When enabled :it is "1.2.3.6:1-1.2.3.6:65535"
===============================================================================
===============================================================================
BGP EVPN Ethernet Segment AD EVI RT Set Route Distinguishers
===============================================================================
Eth Seg                          EVI     Svc ID     Route Distinguisher
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of Entries: 0
===============================================================================
*A:PE-2# show service system bgp-route-distinguisher vpls 
===============================================================================
Service Route Distinguishers
===============================================================================
Svc Id     Type  Oper Route-Distinguisher         Route-Distinguisher
-------------------------------------------------------------------------------
1          vpls  192.0.2.2:1                      configured
1          vpls  192.0.2.2:2                      configured
101        vpls  192.0.2.2:101                    configured
101        vpls  192.0.2.2:102                    configured
500        vpls  192.0.2.2:500                    derivedEvi
600        vpls  192.0.2.2:600                    derivedEvi
804        vpls  192.0.2.2:804                    derivedEvi
-------------------------------------------------------------------------------
Number of RD Entries: 7
===============================================================================
===============================================================================
Service System BGP Route Distinguisher Information
===============================================================================
                    Oper Route Distinguisher                        Type
-------------------------------------------------------------------------------
Auto-rd             192.0.2.2:60000-192.0.2.2:65000                 configured
Ethernet-segment    192.0.2.2:0                                     default
EVI RT Set RD Range <none>                                          
===============================================================================
===============================================================================
BGP EVPN Ethernet Segment AD EVI RT Set Route Distinguishers
===============================================================================
Eth Seg                          EVI     Svc ID     Route Distinguisher
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of Entries: 0
===============================================================================

Context

[Tree] (show>service>id bgp-vpws)

Full Context

show service id bgp-vpws

Description

This command displays BGP VPWS related information for the service.

Platforms

All

Output

The following output is an example of BGP VPWS information.

*A:cses-E11>config>service>epipe>bgp-vpws# show service id 2 bgp-vpws
===============================================================================
BGP VPWS Information
===============================================================================
Admin State          : Enabled
VE Name              : PE1                  VE Id            : 1
PW Template          : 2
Route Dist           : 65536:3
Rte-Target Import    : 65536:2              Rte-Target Export: 65536:2

PW-Template Id       : 2
Import Rte-Tgt       : None
-------------------------------------------------------------------------------
Remote-Ve Information
-------------------------------------------------------------------------------
Remote VE Name       : PE2                  Remote VE Id     : 2
===============================================================================
*A:cses-E11>config>service>epipe>bgp-vpws#

Context

[Tree] (clear>router bier)

Full Context

clear router bier

Description

Commands in this context clear and reset BIER entities.

Platforms

All

Context

[Tree] (show>router bier)

Full Context

show router bier

Description

Commands in this context display BIER information.

Platforms

All

Context

[Tree] (show>router>isis bier-info)

Full Context

show router isis bier-info

Description

This command displays IS-IS BIER sub-TLV information.

Parameters

system-id

Specifies the system ID, up to 72 characters.

lsp-id

Specifies the LSP ID, up to 72 characters.

Platforms

All

Context

[Tree] (show>oam-pm bin-group)

Full Context

show oam-pm bin-group

Description

Show the configuration data for one or all OAM Performance Monitoring bin groups.

Parameters

bin-group-number

Specifies an OAM Performance Monitoring bin group.

Values

1 to 255

detail

Keyword to display additional exclusion and event monitoring information for the bin group.

Platforms

All

Output

The following output is an example of OAM-PM bin group information.

show oam-pm bin-group
-------------------------------------------------------------------------------
Configured Lower Bounds for Delay Tests, in microseconds
-------------------------------------------------------------------------------
Group Description                    Admin Bin     FD(us)    FDR(us)   IFDV(us)
-------------------------------------------------------------------------------
1     OAM PM default bin group (not*    Up   0          0          0          0
                                             1       5000       5000       5000
                                             2      10000          -          -
-------------------------------------------------------------------------------
2                                       Up   0          0          0          0
                                             1          1        500        250
                                             2        500       1000        500
                                             3       1000       1500       1000
                                             4       2000       2000       1500
                                             5       3000       2500       2000
                                             6       4000       3000       2500
                                             7       5000       3500       3000
                                             8       5500       4000       3500
                                             9       6500       4500       4000
-------------------------------------------------------------------------------
3                                       Up   0          0          0          0
                                             1          1        500        250
                                             2        500       1000        500
                                             3       1000       1500       1000
                                             4       2000       2000       1500
                                             5       3000       2500       2000
                                             6       4000       3000       2500
                                             7       5000       3500       3000
                                             8       5500       4000       3500
                                             9       6500       4500       4000
-------------------------------------------------------------------------------
* indicates that the corresponding row element may have been truncated.


show oam-pm bin-group 3 detail
-------------------------------------------------------------------------------
Configured Lower Bounds for Delay Tests, in microseconds
-------------------------------------------------------------------------------
Group Description                    Admin Bin     FD(us)    FDR(us)   IFDV(us)
-------------------------------------------------------------------------------
3                                       Up   0          0          0          0
                                             1          1        500        250
                                             2        500       1000        500
                                             3       1000       1500       1000
                                             4       2000       2000       1500
                                             5       3000       2500       2000
                                             6       4000       3000       2500
                                             7       5000       3500       3000
                                             8       5500       4000       3500
                                             9       6500       4500       4000
-------------------------------------------------------------------------------

---------------------------------------
Bins Excluded from Average
---------------------------------------
Bin Type     Direction            Bins
---------------------------------------
FD          round-trip             0,9
---------------------------------------

--------------------------------------------------------------------------
Delay Events Configured
--------------------------------------------------------------------------
Bin Type    Direction    Lowest Bin    Lower Bound (us)    Raise    Clear
--------------------------------------------------------------------------
FD         round-trip             8                5500      100     none
--------------------------------------------------------------------------

--------------------------------------------------------------------
Bins Excluded from Delay Event Count
--------------------------------------------------------------------
Bin Type     Direction     Lowest Excluded Bin     Lower Bound (us)
--------------------------------------------------------------------
FD          round-trip                       9                 6500
--------------------------------------------------------------------

--------------------------------------------------------------------------
Delay Events Configured
--------------------------------------------------------------------------
Bin Type    Direction    Lowest Bin    Lower Bound (us)    Raise    Clear
--------------------------------------------------------------------------
FD            forward             3                1000      200     none
--------------------------------------------------------------------------

--------------------------------------------------------------------
Bins Excluded from Delay Event Count
--------------------------------------------------------------------
Bin Type     Direction     Lowest Excluded Bin     Lower Bound (us)
--------------------------------------------------------------------
FD             forward                       4                 2000
--------------------------------------------------------------------

Context

[Tree] (show>oam-pm bin-group-using)

Full Context

show oam-pm bin-group-using

Description

Show the list of sessions configured against one or all OAM Performance Monitoring bin groups.

Parameters

bin-group-number

Specifies an OAM Performance Monitoring bin group.

Values

1 to 255

Platforms

All

Output

The following output is an example of OAM-PM bin group session information.

show oam-pm bin-group-using
=========================================================================
OAM Performance Monitoring Bin Group Configuration for Sessions
=========================================================================
Bin Group       Admin   Session                            Session State
-------------------------------------------------------------------------
2               Up      vpls1000-PM-AL5-1/1/9:1000.1000              Act
-------------------------------------------------------------------------
3               Up      vpls1000-PM-YL4-1/1/9:1000.1000              Act
-------------------------------------------------------------------------
========================================================================= 
Admin: State of the bin group
Session State: The state of session referencing the bin-group


show oam-pm bin-group-using bin-group 2
=========================================================================
OAM Performance Monitoring Bin Group Configuration for Sessions
=========================================================================
Bin Group       Admin   Session                            Session State
-------------------------------------------------------------------------
2               Up      vpls1000-PM-AL5-1/1/9:1000.1000              Act
-------------------------------------------------------------------------
=========================================================================
Admin: State of the bin group
Session State: The state of session referencing the bin-group

Context

[Tree] (show>router>mpls>forwarding-policies binding-label)

Full Context

show router mpls forwarding-policies binding-label

Description

This command displays the MPLS forwarding policy binding label information.

Parameters

label

Specifies the label value.

Values

32 to 1048575

detail

Displays detailed information of the binding label.

egress-stats

Displays the egress statistics, if any, of all the instances of the specified forwarding policy.

ingress-stats

Displays ingress statistics information.

Platforms

All

Output

MPLS Binding Label Output Fields describes MPLS binding label output fields.

===============================================================================
*A:Dut-C> show router mpls forwarding-policies binding-label 
  - binding-label [<label>] [detail]
*A:Dut-C> show router mpls forwarding-policies binding-label 
===============================================================================
Binding Label
===============================================================================
   Label                      Preference               Oper State
Policy Name                                            
-------------------------------------------------------------------------------
   33                         253                      Down
indirect1
-------------------------------------------------------------------------------
No. of Binding Labels: 1
===============================================================================
*A:Dut-C> show router mpls forwarding-policies binding-label detail 
===============================================================================
Binding Label (Detail)
===============================================================================
Label          : 33                     Preference     : 253
Policy Name    : indirect1
Oper State     : Down                   OperDownReason : notApplicable
Down Time      : 09/28/2018 19:53:33    NumNextHopGrps : 1
Ingress Stats  : Disabled               IngrOperState  : Down
Revert Timer   : 600                    
Retry Count    : 0                      Next Retry In  : 0
Next-hop Group : 1                      Resolution Type: indirect
Oper State     : Down                   OperDownReason : notApplicable
Num Revert     : 0                      Num Failover   : 0
Next Revert In : 0                      
Primary nexthop: 4.4.4.4
Resolved       : False                  NHopDownReason : notApplicable
Backup nexthop : 3.3.3.3
Resolved       : False                  NHopDownReason : notApplicable
-------------------------------------------------------------------------------

show router mpls forwarding-policies binding-label 400001 egress-stats
===============================================================================
Binding Label (Detail)
===============================================================================
Label          : 400001                Preference        : 255 
Policy Name    : cc                    Oper State        : Up
EgrStatsState  : Up
 Next-hop Group   : 1                      
  Primary nexthop : 10.10.5.5  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000           
  Backup nexthop  : 10.10.11.4  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000           
 Next-hop Group   : 2                      
  Primary nexthop : 10.10.5.5  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000             
  Backup nexthop  : 10.10.11.4  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000 
Total Aggr        :
   Aggr Pkts: 44000                    Aggr Octets: 46200000
-------------------------------------------------------------------------------
===============================================================================

Context

[Tree] (monitor>router>mpls>forwarding-policies binding-label)

Full Context

monitor router mpls forwarding-policies binding-label

Description

This command monitors statistics for Forwarding Policy Binding Label.

Parameters

label

Specifies the label value.

Values

32 to 1048575

ingress-stats

Displays ingress statistics information.

seconds

Configures the interval for each display in seconds.

Values

3 to 60

Default

10

repeat

Configures how many times the command is repeated.

Values

1 to 999

Default

10

absolute

Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.

rate

Displays rate-per-second for each statistic instead of the delta.

Platforms

All

Context

[Tree] (clear>router>mpls>forwarding-policies binding-label)

Full Context

clear router mpls forwarding-policies binding-label

Description

This command clears or resets statistics for the MPLS forwarding policy binding label.

Parameters

label

Specifies the label value.

Values

32 to 1048575

ingress-stats

Displays ingress statistics information.

Platforms

All

Context

[Tree] (show>subscr-mgmt>vrgw>brg>gateway bindings)

Full Context

show subscriber-mgmt vrgw brg gateway bindings

Description

This command lists all the DHCP bindings of the local pool associated with the specified BRG. If the MAC attribute is specified, only the binding for that MAC address is displayed.

Parameters

ieee-address

specifies the MAC address identifying a specific binding.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of BRG gateway binding information.

Node# show subscriber-mgmt brg gateway brg-id "00:00:00:00:00:05" bindings
===============================================================================
Bridged Residential Gateway home-aware pool address bindings
===============================================================================
Home-aware pool              : 00:00:00:00:00:05
-------------------------------------------------------------------------------
MAC address                  : 00:02:00:00:00:19
IP address                   : 21.0.0.20
Allocation type              : dynamic
DHCP lease                   : true
Remaining lease time         : 489
Lease start time             : 2016/01/18 17:44:44
MAC address                  : 00:02:00:00:00:1a
IP address                   : 21.0.0.21
Allocation type              : dynamic
DHCP lease                   : true
Remaining lease time         : 493
Lease start time             : 2016/01/18 17:44:48
MAC address                  : 00:02:00:00:00:1b
IP address                   : 21.0.0.22
Allocation type              : dynamic
DHCP lease                   : true
Remaining lease time         : 497
Lease start time             : 2016/01/18 17:44:52
-------------------------------------------------------------------------------
No. of bindings: 3
===============================================================================

Context

[Tree] (show>router>ldp bindings)

Full Context

show router ldp bindings

Description

This command displays LDP bindings information.

Platforms

All

Output

The following output is an example of LDP bindings information.

*A:Dut-A# show router ldp bindings active                              

========================================================================
Legend: U - Label In Use,  N - Label Not In Use, W - Label Withdrawn
        WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
        (S) - Static       (M) - Multi-homed Secondary Support
        (B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
========================================================================
LDP IPv4 Prefix Bindings (Active)
========================================================================
Prefix                  Op   IngLbl    EgrLbl    EgrIntf/LspId  EgrNextHop
------------------------------------------------------------------------
10.20.1.1/32            Pop  131071      --        --             --
10.20.1.2/32            Push   --      131071    1/1/1          10.10.1.2
10.20.1.2/32            Swap 131070    131071    1/1/1          10.10.1.2
10.20.1.2/32            Push   --      262141BU  1/1/2          10.10.2.3
10.20.1.2/32            Swap 131070    262141BU  1/1/2          10.10.2.3
10.20.1.3/32            Push   --      131069BU  1/1/1          10.10.1.2
10.20.1.3/32            Swap 131069    131069BU  1/1/1          10.10.1.2
10.20.1.3/32            Push   --      262143    1/1/2          10.10.2.3
10.20.1.3/32            Swap 131069    262143    1/1/2          10.10.2.3
10.20.1.4/32            Push   --      131068    1/1/1          10.10.1.2
10.20.1.4/32            Swap 131068    131068    1/1/1          10.10.1.2
10.20.1.4/32            Push   --      262140BU  1/1/2          10.10.2.3
10.20.1.4/32            Swap 131068    262140BU  1/1/2          10.10.2.3
10.20.1.5/32            Push   --      131067BU  1/1/1          10.10.1.2
10.20.1.5/32            Swap 131067    131067BU  1/1/1          10.10.1.2
10.20.1.5/32            Push   --      262139    1/1/2          10.10.2.3
10.20.1.5/32            Swap 131067    262139    1/1/2          10.10.2.3
10.20.1.6/32            Push   --      131066    1/1/1          10.10.1.2
10.20.1.6/32            Swap 131066    131066    1/1/1          10.10.1.2
10.20.1.6/32            Push   --      262138BU  1/1/2          10.10.2.3
10.20.1.6/32            Swap 131066    262138BU  1/1/2          10.10.2.3
------------------------------------------------------------------------

-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 10
===============================================================================

===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix                                      Op              IngLbl    EgrLbl
EgrNextHop                                  EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id                                     Interface
RootAddr                                    Op              IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP Generic IPv6 P2MP Bindings (Active)
===============================================================================
P2MP-Id                                     Interface
RootAddr                                    Op              IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group                                       Interface
RootAddr                                    Op              IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group                                       Interface
RootAddr                                    Op              IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group                                       RD              Op
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group                                       RD              Op
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================


*A:Dut-A# show router ldp bindings                               

========================================================================
LDP Bindings (IPv4 LSR ID 10.1.1.1:0)
             (IPv6 LSR ID ::[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
        S - Status Signaled Up,  D - Status Signaled Down
        E - Epipe Service, V - VPLS Service, M - Mirror Service
        A - Apipe Service, F - Fpipe Service, I - IES Service, R - VPRN service
        P - Ipipe Service, WP - Label Withdraw Pending, C - Cpipe Service
        BU - Alternate For Fast Re-Route, TLV - (Type, Length: Value)
===============================================================================
LDP IPv4 Prefix Bindings
========================================================================
Prefix             Peer            IngLbl     EgrLbl EgrIntf/    EgrNextHop
                                                    LspId       
------------------------------------------------------------------------
10.20.1.1/32       10.20.1.2       131071U     --     --          --
10.20.1.1/32       10.20.1.3       131071U     --     --          --
10.20.1.2/32       10.20.1.2         --       131071 1/1/1       10.10.1.2
10.20.1.2/32       10.20.1.3       131070U    262141 1/1/2       10.10.2.3
10.20.1.3/32       10.20.1.2       131069U    131069 1/1/1       10.10.1.2
10.20.1.3/32       10.20.1.3         --       262143 1/1/2       10.10.2.3
10.20.1.4/32       10.20.1.2       131068N    131068 1/1/1       10.10.1.2
10.20.1.4/32       10.20.1.3       131068BU   262140 1/1/2       10.10.2.3
10.20.1.5/32       10.20.1.2       131067U    131067 1/1/1       10.10.1.2
10.20.1.5/32       10.20.1.3       131067N    262139 1/1/2       10.10.2.3
10.20.1.6/32       10.20.1.2       131066N    131066 1/1/1       10.10.1.2
10.20.1.6/32       10.20.1.3       131066BU   262138 1/1/2       10.10.2.3
------------------------------------------------------------------------
No. of IPv4 Prefix Bindings: 12
========================================================================

===============================================================================
LDP IPv6 Prefix Bindings
===============================================================================
Prefix                                      IngLbl                    EgrLbl
Peer                                        EgrIntf/LspId
EgrNextHop
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP Generic IPv4 P2MP Bindings
===============================================================================
P2MP-Id
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
100
10.1.1.1                                    Unknw             --      131051
10.90.90.2                                  1/1/6
10.2.2.2:0

104
10.1.1.1                                    Unknw             --      131050
10.90.90.2                                  1/1/6
10.2.2.2:0

600
10.1.1.1                                    Unknw             --      131049
10.90.90.2                                  1/1/6
10.2.2.2:0

700
10.1.1.1                                    Unknw             --      131048
10.90.90.2                                  1/1/6
10.2.2.2:0

800
10.1.1.1                                    Unknw             --      131047
10.90.90.2                                  1/1/6
10.2.2.2:0

900
10.1.1.1                                    Unknw             --      131046
10.90.90.2                                  1/1/6
10.2.2.2:0

1500
10.1.1.1                                    Unknw             --      131045
10.90.90.2                                  1/1/6
10.2.2.2:0

100
10.6.6.6                                    Unknw             --      131044
10.90.90.2                                  1/1/6
10.2.2.2:0

900
10.6.6.6                                    Unknw             --      131043
10.90.90.2                                  1/1/6
10.2.2.2:0

-------------------------------------------------------------------------------
No. of Generic IPv4 P2MP Bindings: 9
===============================================================================

===============================================================================
LDP Generic IPv6 P2MP Bindings
===============================================================================
P2MP-Id
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings
===============================================================================
Source
Group
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings
===============================================================================
Source
Group
RootAddr                                    Interface       IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

===============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings
===============================================================================
Source
Group                                       RD
RootAddr                                    Interface         IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
10.1.1.1
225.0.0.1                                  10.1.1.1:100
10.3.3.3                                   Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
10.1.1.1
225.0.0.1                                  10.1.1.1:100
10.3.3.3                                   Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
10.1.1.1
225.0.0.1                                  10.1.1.1:100
10.3.3.3                                   Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
-------------------------------------------------------------------------------
No. of In-Band-VPN-SSM IPv4 P2MP Bindings: 3
===============================================================================
 
===============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings
===============================================================================
===============================================================================
Source
Group                                       RD
RootAddr                                    Interface         IngLbl    EgrLbl
EgrNH                                       EgrIf/LspId
Peer
-------------------------------------------------------------------------------
10.1.1.1
225.0.0.1                                  10.1.1.1:100
2000::3000                                 Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
10.1.1.1
225.0.0.1                                  10.1.1.1:100
2000::3000                                 Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
10.1.1.1
225.0.0.1                                  10.1.1.1:100
2000::3000                                 Unknwn              --         100
10.60.60.1                                 1/1/1
10.2.2.2:100
 
-------------------------------------------------------------------------------
No. of In-Band-VPN-SSM IPv6 P2MP Bindings: 3
===============================================================================

===============================================================================
LDP Service FEC 128 Bindings
===============================================================================
Type                                          VCId       SDPId     IngLbl  LMTU
Peer                                          SvcId                EgrLbl  RMTU
-------------------------------------------------------------------------------
?-Eth                                         100        R. Src      --    None
10.2.2.2:0                                     Ukwn                 131023D 986

?-Eth                                         500        R. Src      --    None
10.2.2.2:0                                     Ukwn                 131022D 1386

?-Eth                                         2001       R. Src      --    None
10.2.2.2:0                                     Ukwn                 131019D 986

?-Eth                                         2003       R. Src      --    None
10.2.2.2:0                                     Ukwn                 131017D 986

?-Ipipe                                       1800       R. Src      --    None
10.2.2.2:0                                     Ukwn                 131014D 1486

-------------------------------------------------------------------------------
No. of VC Labels: 5
===============================================================================

===============================================================================
LDP Service FEC 129 Bindings
===============================================================================
SAII                                            AGII        IngLbl    LMTU
TAII                                            Type        EgrLbl    RMTU
Peer                                            SvcId       SDPId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

Context

[Tree] (show>system bluetooth)

Full Context

show system bluetooth

Description

This command displays detailed information about the Bluetooth configuration on the CPM or chassis.

Parameters

ieee-address

Specifies the source MAC address.

Values

xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx

cpm-slot

Specifies the CPM slot.

Values

A , B, C, D

Platforms

7750 SR-1, 7750 SR-s, 7950 XRS-20e

Output

The following output is an example of Bluetooth configuration information. System Bluetooth Field Descriptions describes the output fields.

*A:bkvm18>show>system# bluetooth
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================
*A:bkvm18>show>system# bluetooth device
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================
Bluetooth Devices
========================================
Device            : 00:22:33:44:55:66
Description       : peter's ipad
Device            : 11:22:33:44:55:66
Description       : (Not Specified)
Device            : 22:22:33:44:55:66
Description       : description
-------------------------------------------------------------------------------
Number of Devices : 3
========================================
*A:bkvm18>show>system# bluetooth device  00:22:33:44:55:66
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================
========================================
Bluetooth Devices
========================================
Device            : 00:22:33:44:55:66
Description       : peter's ipad
========================================
*A:bkvm18>show>system# bluetooth module
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================
===============================================================================
Bluetooth Modules
===============================================================================
Module                : A
Connected Device      : Yes 
Device Mac            : 00:22:33:44:55:66
Device Description    : peter's ipad
Configured Identifier : (Not Configured)
Operational Identifier: 7750-SR-14s-CPM-A-NS123456
Module                : B
Connected Device      : No
Device Mac            :
Device Description    :
Configured Identifier : (Not Configured)
Operational Identifier: 7750-SR-14s-CPM-B-NS654321
===============================================================================
*A:bkvm18>show>system# bluetooth module "A"
===============================================================================
System-wide Bluetooth Configuration
===============================================================================
Passkey           : 123456              Advertising Timeout: 30
Power State       : off                 Pairing Button     : Disabled
===============================================================================
===============================================================================
Bluetooth Modules
===============================================================================
Module                : A
Connected Device      : Yes 
Device Mac            : 00:22:33:44:55:66
Device Description    : peter's ipad
Configured Identifier : (Not Configured)
Operational Identifier: 7750-SR-14s-CPM-A-NS123456
===============================================================================* 

Context

[Tree] (tools>perform>system bluetooth)

Full Context

tools perform system bluetooth

Description

Commands in this context are related to the Bluetooth interface.

Platforms

7750 SR-1, 7750 SR-s, 7950 XRS-20e

Context

[Tree] (clear>service>id bmp)

[Tree] (clear>router bmp)

Full Context

clear service id bmp

clear router bmp

Description

Commands in this context clear and reset BGP Monitoring Protocol (BMP) station connections.

Platforms

All

Context

[Tree] (show>router bmp)

[Tree] (show>service>id bmp)

Full Context

show router bmp

show service id bmp

Description

Commands in this context display BGP related information.

Platforms

All

Context

[Tree] (show bmp)

Full Context

show bmp

Description

Commands in this context display BGP Monitoring Protocol (BMP) information.

Platforms

All

Context

[Tree] (show bof)

Full Context

show bof

Description

This command displays the Boot Option File (BOF) executed on last system boot or on the specified device.

If no device is specified, the BOF used in the last system boot displays. If the BOF has been modified since the system boot, a message displays.

Parameters

cflash-id

Displays the cflash directory name. The slot name is not case-sensitive. Use upper or lowercase "A” or "B” for the slot name.

Values

cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:

booted

displays the boot option file used to boot the system.

Platforms

All

Output

The following output is an example of BOF, and Show BOF Output Fields describes the output fields.

A:ALA-1# show bof cf3:
=====================================================================
BOF on cf3:
=====================================================================
autonegotiate
primary-image    ftp://test:test@192.168.xx.xx/./both.tim
primary-config   ftp://test:test@192.168.xx.xx/./1xx.cfg
secondary-image  cf1:/i650/
secondary-config cf1:/config.cfg
address          192.168.xx.xxx/20 active
address          192.168.xx.xxx/20 standby
primary-dns      192.168.xx.xxx
dns-domain       test.test.com
autonegotiate
duplex           full
speed            100
wait             2
persist          off
    console-speed    115200
===============================================================================
A:ALA-1# 
A:ALA-1# show bof booted
=====================================================================
System booted with BOF
=====================================================================
primary-image    ftp://test:test@192.168.xx.xx/./both.tim
   primary-config   ftp://test:test@192.168.xx.xx/./103.cfg
   secondary-image  cf1:/i650/
   secondary-config cf1:/config.cfg
   address          192.168.xx.xxx/20 active
   address          192.168.xx.xxx/20 standby
   primary-dns      192.168.xx.xxx
   dns-domain       test.test.com
   autonegotiate
   duplex           full
   speed            100
   wait             2
persist          off
    console-speed    115200
===============================================================================
A:ALA-1# 

Context

[Tree] (show>service bonding)

Full Context

show service bonding

Description

This command displays an overview of active bonding contexts and the associated access connections.

When a bonding ID is specified, only information for that specific context is displayed.

Parameters

bonding-id

Specifies the ID of a specific bonding context.

detail

Displays additional detailed bonding settings, such as load-balancing.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of bonding information.

Node# show service bonding
===============================================================================
Bonding Summary
===============================================================================
-------------------------------------------------------------------------------
Bond1 - svc:40 - itf:grp_itf_bonding
-------------------------------------------------------------------------------
 1 - PPP  - svc:30 - sap:1/1/3:1 - mac:00:00:00:00:00:01 - sid:1
 2 - IPOE - svc:11 - sap:pxc-1.b:1.8 - mac:00:03:ff:f0:01:00
-------------------------------------------------------------------------------
===============================================================================
show service bonding bonding-id Bond1 detail
===============================================================================
Bonding Summary
===============================================================================
-------------------------------------------------------------------------------
Bond1 - svc:40 - itf:grp_itf_bonding
-------------------------------------------------------------------------------
 1 - PPP  - svc:30 - sap:1/1/3:1 - mac:00:00:00:00:00:01 - sid:1
 2 - IPOE - svc:11 - sap:pxc-1.b:1.8 - mac:00:03:ff:f0:01:00
-------------------------------------------------------------------------------
Reference rate                : 10000000 kbps
Low threshold rate            : 8000000 kbps
High threshold rate           : 9000000 kbps
Initial load-balancing weight : 100%
Load-balancing weight change  : 5%
Current load-balancing weight : 100%
-------------------------------------------------------------------------------
===============================================================================

Context

[Tree] (tools>perform>subscr-mgmt bonding)

Full Context

tools perform subscriber-mgmt bonding

Description

This command enables the tools used for hybrid access bonding.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Context

[Tree] (show boot-messages)

Full Context

show boot-messages

Description

This command displays boot messages generated during the last system boot.

Platforms

All

Output

The following output is an example of a boot-message.

*A:raven14s# show boot-messages
===============================================================================
cf3:/bootlog.txt
===============================================================================
Boot log started on CPU#0
  Build: X-0.0.I5679 on Mon Oct  1 18:08:38 PDT 2018 by builder
  CPUCTL FPGA version: 17
Boot rom version is v54
CPU Control FPGA version is 0x17
Multicore RAM test using 10 cores
>>>Testing  SDRAM from 0x0000000002200000 to 0x0000000080000000
>>>Testing  SDRAM from 0xffffffffe0000000 to 0xfffffffffe000000
>>>Testing  SDRAM from 0x0000000080000000 to 0x00000003e4000000
>>>Testing Compact Flash 1... Slot Empty
>>>Testing Compact Flash 2... Slot Empty
>>>Testing Compact Flash 3... OK (STEC M2+ CF 9.0.2)
Board Serial Number is 'NS184100464'
Platforms in Chassis EEProm 1 is 0x1
Chassis type 34 (sr14s_r1) found in Chassis EEProm 1
Chassis Serial Number is 'NS173300113'
Searching for boot.ldr on local drives:
Searching cf3 for boot.ldr...
*************************************************************************************************
Total Memory: 16GB  Chassis Type: sr14s_r1 (0x22)  Card Type: pegasus_r1 (0x42)  [IOCTRL Ver:0x17 Date:not-available]   Git: [ Tag/Hash: TiMOS_16_0_R4-g49edf4fa7f67; branch: master, remote: master]
TiMOS-L-16.0.R4 boot/hops Nokia 7xxx ? Copyright (c) 2000-2018 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Sun Sep 30 18:08:18 PDT 2018 by builder in /builds/160/R4/panos/main
TiMOS BOOT LOADER
Extended checks enabled with overhead of 36B
Fair scheduler is now enabled
Time from clock is TUE NOV 17 15:12:04 2020 UTC
Switching serial output to sync mode...   done
Looking for cf3:/bof.cfg ... OK, reading
Contents of Boot Options File on cf3:

Context

[Tree] (show>subscr-mgmt>vrgw brg)

Full Context

show subscriber-mgmt vrgw brg

Description

Commands in this context display operational information for connected BRGs and related hosts.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Context

[Tree] (clear>subscr-mgmt>vrgw brg)

Full Context

clear subscriber-mgmt vrgw brg

Description

This command clears BRG data.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Context

[Tree] (tools>perform>subscr-mgmt>vrgw brg)

Full Context

tools perform subscriber-mgmt vrgw brg

Description

This command enables tools for controlling BRGs.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Context

[Tree] (show>subscr-mgmt>vrgw>brg brg-hosts)

Full Context

show subscriber-mgmt vrgw brg brg-hosts

Description

This command displays operational information for connected BRGs and related hosts.

Parameters

ieee-address

Displays detailed information for each prefix.

ip-address

Displays only the prefixes associated with this subscriber interface.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of subscriber management BRG host information.

Node# show subscriber-mgmt brg brg-hosts
===============================================================================
Bridged Residential Gateway hosts
===============================================================================
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:19
IP address                   : 21.0.0.20
Service                      : 4 (VPRN)
Allocation type              : dynamic
Home-aware pool              : 00:00:00:00:00:05
DHCP lease                   : true
Remaining lease time         : 482
Lease start time             : 2016/01/18 17:44:44
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:19
IP address                   : 3ffe:0:0:5::
Service                      : 4 (VPRN)
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:1a
IP address                   : 21.0.0.21
Service                      : 4 (VPRN)
Allocation type              : dynamic
Home-aware pool              : 00:00:00:00:00:05
DHCP lease                   : true
Remaining lease time         : 486
Lease start time             : 2016/01/18 17:44:48
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:1a
IP address                   : 3ffe:0:0:5::
Service                      : 4 (VPRN)
Identifier                   : 00:00:00:00:00:05
MAC address                  : 00:02:00:00:00:1b
IP address                   : 21.0.0.22
Service                      : 4 (VPRN)
Allocation type              : dynamic
Home-aware pool              : 00:00:00:00:00:05
DHCP lease                   : true
Remaining lease time         : 490
Lease start time             : 2016/01/18 17:44:52
-------------------------------------------------------------------------------
No. of BRG hosts: 5
===============================================================================

Context

[Tree] (show subscr-mgmt vrgw brg brg-profile)

Full Context

show subscriber-mgmt vrgw brg brg-profile

Description

This command displays BRG profile information.

Parameters

name

Specifies an existing BRG profile name.

associations

Displays information associated with the specified BRG profile name.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Context

[Tree] (show>router>bgp>routes brief)

Full Context

show router bgp routes brief

Description

This command displays summary information about the BGP routes.

brief is a parameter of the show router bgp routes command. Depending on the parameters that are used to issue the command, the output can display a narrower or wider set of routes, including routes belonging to other address families. See the show router bgp routes command description for syntax variants, parameter descriptions and values, and output examples.

Platforms

All

Context

[Tree] (show>test-oam build-packet)

Full Context

show test-oam build-packet

Description

Commands in this context display OAM egress port finder information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Context

[Tree] (show>router>l2tp>mlppp bundles)

Full Context

show router l2tp mlppp bundles

Description

This command displays L2TP MLPPP bundle statistics.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s

Output

The following output is an example of L2TP MLPPP bundle statistics information.

The following is an example with one MLPPP bundle (using two links).

*A:Dut-B# show router 100 l2tp mlppp 
*A:Dut-B# show router 100 l2tp mlppp bundles 
===============================================================================
L2TP MLPPP LAC Bundles
===============================================================================
User user_v46_1
Bundle index                : 1
Service                     : 100
Forwarding tunnel ID        : N/A
Local endpoint class        : ipv4-address
Local endpoint address      : 1.1.1.1
Remote endpoint class       : local
Remote endpoint address     : linuxBundle1
Links                       : 1. ID 805988014 (established)
                              2. ID 805991249 (established)
-------------------------------------------------------------------------------
Number of bundles: 1
===============================================================================
*A:Dut-B#

The following is an example with two MLPPP bundles (using two links)

*A:Dut-B# show router 100 l2tp mlppp         
*A:Dut-B# show router 100 l2tp mlppp bundles 
===============================================================================
L2TP MLPPP LAC Bundles
===============================================================================
User user_v46_1
Bundle index                : 1
Service                     : 100
Forwarding tunnel ID        : N/A
Local endpoint class        : ipv4-address
Local endpoint address      : 1.1.1.1
Remote endpoint class       : local
Remote endpoint address     : linuxBundle1
Links                       : 1. ID 518660444 (established)
                              2. ID 518672262 (established)
User user_v46_2
Bundle index                : 2
Service                     : 100
Forwarding tunnel ID        : N/A
Local endpoint class        : ipv4-address
Local endpoint address      : 1.1.1.1
Remote endpoint class       : local
Remote endpoint address     : linuxBundle2
Links                       : 1. ID 518652432 (established)
                              2. ID 518652553 (established)
-------------------------------------------------------------------------------
Number of bundles: 2
===============================================================================
*A:Dut-B# 

Context

[Tree] (show>router>mpls bypass-tunnel)

Full Context

show router mpls bypass-tunnel

Description

This command displays MPLS bypass tunnel information.

If fast reroute is enabled on an LSP and the facility method is selected, instead of creating a separate LSP for every LSP that is to be backed up, a single LSP is created and serves as a backup for a set of LSPs. Such an LSP tunnel is called a bypass tunnel.

Parameters

ip-address

Specifies the IP address of the egress router.

name

Specifies the name of the LSP protected by the bypass tunnel up to 160 characters. "*” is accepted as a wild card character.

dynamic

Keyword used to display dynamically-assigned labels for bypass protection.

manual

Keyword used to display manually-assigned labels for bypass protection.

detail

Keyword used to display detailed information.

p2mp

Keyword used to display P2MP bypass tunnel information.

session-name

Specifies the session name, up to 160 characters, of the LSP used in the path. "*” can be used as a wildcard character.

dns

Keyword used to display reverse DNS resolution of actual and explicit hop information.

Platforms

All

Output

The following output is an example of MPLS bypass tunnel information, and MPLS bypass tunnel output fields describes MPLS bypass tunnel output fields.

A:SRU4>show>router>mpls# bypass-tunnel
===============================================================================
MPLS Bypass Tunnels
===============================================================================
Legend :  m - Manual      d - Dynamic      p - P2mp
===============================================================================
To              State  Out I/F        Out Label     Reserved   Protected  Type
                                                    BW (Kbps)  LSP Count
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================

The following output is an example of MPLS bypass tunnel detailed information and MPLS bypass tunnel detailed output fields describes MPLS bypass tunnel output fields.

A:Dut-B# show router mpls bypass-tunnel detail

=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.4
-----------------------------------------------------------------------
To              : 10.20.1.7          State               : Up
Out I/F         : 1/1/4              Out Label           : 131071
Up Time         : 0d 01:17:22        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 1
Type            : Dynamic
Setup Priority  : 7                  Hold Priority       : 0
Class Type      : 0
Exclude Node    : 10.20.1.4          Inter-Area          : True
Computed Hops   :
    10.10.8.2(S)                     Egress Admin Groups : None
-> 10.10.8.6(SA)                    Egress Admin Groups : None
-> 10.20.1.7(L)                     Egress Admin Groups : None
Actual Hops     :
    10.10.8.2(10.20.1.2)             Record Label        : N/A
-> 10.10.8.6(10.20.1.6)             Record Label        : 131071
-> 10.20.1.7(10.20.1.7)             Record Label        : 131068
-> 10.10.22.7                       Record Label        : 131068

=======================================================================

A:Dut-A>config>router>mpls>lsp$ /show router mpls bypass-tunnel detail 

=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.2
-----------------------------------------------------------------------
To              : 10.20.1.4          State               : Up
Out I/F         : 1/1/2              Out Label           : 131070
Up Time         : 0d 00:00:18        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 1
Type            : Dynamic            
Setup Priority  : 7                  Hold Priority       : 0
Class Type      : 0                  
Exclude Node    : None               Inter-Area          : False
Computed Hops   :                    
    10.20.1.1, If Index : 3(S)       Egress Admin Groups : None
-> 10.20.1.3, If Index : 2(S)       Egress Admin Groups : None
-> 10.20.1.4, If Index : 5(S)       Egress Admin Groups : None
Actual Hops     :                    
    10.20.1.1, If Index : 3          Record Label        : N/A
-> 10.20.1.3, If Index : 2          Record Label        : 131070
-> 10.20.1.4, If Index : 5          Record Label        : 131070

=======================================================================

B:Dut-B>config>router>mpls>lsp# show router mpls bypass-tunnel detail

=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.4
-----------------------------------------------------------------------
To              : 10.10.10.6         State               : Up
Out I/F         : lag-1              Out Label           : 131071
Up Time         : 0d 00:00:06        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 1
Type            : Dynamic
Setup Priority  : 7                  Hold Priority       : 0
Class Type      : 0
Exclude Node    : None
Actual Hops     :
    10.10.12.2(S)                     Egress Admin Groups:
                                      lime
                                      olive
                                      blue
                                      black
                                      acqua
-> 10.10.12.3(S)                     Egress Admin Groups:
                                      olive
                                      Unknown Group 9
                                      Unknown Group 11
                                      black
                                      Unknown Group 16
                                      Unknown Group 18
-> 10.10.5.5(S)                      Egress Admin Groups:
                                      purple
                                      Unknown Group 7
                                      Unknown Group 11
                                      orange
                                      acqua
                                      Unknown Group 16
                                      Unknown Group 19
                                      Unknown Group 21
                                      Unknown Group 22
                                      Unknown Group 26
                                      khaki
-> 10.10.10.6(S)                     Egress Admin Groups: None

=======================================================================

A:Dut-B# show router mpls bypass-tunnel detail 
==============================================================================
MPLS Bypass Tunnels (Detail)
==============================================================================
bypass-link10.10.104.4
------------------------------------------------------------------------------
To              : 10.10.101.4        State               : Up                  
Out I/F         : 1/1/2:1            Out Label           : 129994              
Up Time         : 0d 00:02:33        Active Time         : n/a                 
Reserved BW     : 0 Kbps             Protected LSP Count : 1                   
Type            : Dynamic                                                      
SetupPriority   : 7                  Hold Priority       : 0                   
Class Type      : 0                                                            
Actual Hops     :                                                              
    10.10.101.2     -> 10.10.101.4 
==============================================================================

A:Dut-C# show router mpls bypass-tunnel path detail dns 

===============================================================================
MPLS Bypass Tunnels (Detail)
===============================================================================
-------------------------------------------------------------------------------
bypass-node10.20.1.1-61442
-------------------------------------------------------------------------------
To             : 10.10.12.2          State               : Up
Out I/F        : lag-1               Out Label           : 524278
Up Time        : 0d 00:07:35         Active Time         : n/a
Reserved BW    : 0 Kbps              Protected LSP Count : 10
Type           : Dynamic             Bypass Path Cost    : 333
Setup Priority : 7                   Hold Priority       : 0
Class Type     : 0                   
Exclude Node   : None                Inter-Area          : False
Computed Hops  :                     
    10.10.12.3(S)                    Egress Admin Groups : None
 -> 10.10.12.2(S)                    Egress Admin Groups : None
Actual Hops    :                     
    10.10.12.3(10.20.1.3)            Record Label        : N/A
    toB-lag.Dut-C.nokia.com
    (Dut-C.system.nokia.com)
 -> 10.10.12.2(10.20.1.2)            Record Label        : 524278
    toC-lag.Dut-B.nokia.com
    (Dut-B.nokia.com)
Last Resignal  :                     
Attempted At   : n/a                 Resignal Reason     : n/a
Resignal Status: n/a                 Reason              : n/a
 
===============================================================================

Context

[Tree] (tools>dump>router>mpls bypass-tunnel)

Full Context

tools dump router mpls bypass-tunnel

Description

This command displays information about the MPLS bypass tunnel.

Parameters

lsp-name

Specifies the LSP name up to 64 characters in length.

plr

Specifies the point of local repair (PLR).

Platforms

All

Output

The following output is an example of MPLS Bypass Tunnels PLR fields.

tools dump router mpls bypass-tunnel plr 
========================================================================
MPLS Bypass Tunnels
========================================================================
Legend :  m - Manual      d - Dynamic      p - P2mp
========================================================================
To              State  Out I/F        Out Label     Reserved   Protected  Type
                                                    BW (Kbps)  LSP Count
------------------------------------------------------------------------
10.10.12.1      Up     1/1/4          124181        0          369        d

To              : 10.10.12.1         State               : Up
Out I/F         : 1/1/4              Out Label           : 124181
Up Time         : 0d 19:24:13        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 369
Type            : Dynamic
SetupPriority   : 7                  Hold Priority       : 0
Class Type      : 0                  Tunnel Id : 63697
Actual Hops     :
    10.10.12.2(S)      -> 10.10.12.1(S)
       
         Plr List: (Last PlrIdx 2)
         --------
                 PLR List Index = 1
                 PLR current State = PLRS_CONNECTED
                 NextNodeSysId = 10.8.8.8
                  AvoidNodeId   = 10.2.2.2
                 NodeProtect   = 2 (Node Protect)
                 LSP Count     = 197
                 PLR List Index = 2
                 PLR current State = PLRS_BackupInUse
                 NextNodeSysId = 10.8.8.8
                 AvoidNodeId   = 10.2.2.2
                 NodeProtect   = 2 (Node Protect)
                 LSP Count     = 203