e Commands
ecmp
ecmp
Syntax
ecmp
Context
[Tree] (show>router ecmp)
Full Context
show router ecmp
Description
This command displays the ECMP settings for the router.
Platforms
All
Output
The following output is an example of ECMP settings information, and ECMP Fields describes the output fields for the router ECMP settings.
Output ExampleA:ALA-A# show router ecmp
===============================================================================
Router ECMP
===============================================================================
Instance Router Name ECMP Configured-ECMP-Routes
-------------------------------------------------------------------------------
1 Base True 8
===============================================================================
A:ALA-A#
*A:Dut-C# show router ecmp
===============================================================================
Router ECMP
===============================================================================
Instance Router Name ECMP Max-ECMP- Weight ECMP
Rtes
-------------------------------------------------------------------------------
1 Base True 32 True
===============================================================================
|
Label |
Description |
|---|---|
|
Instance |
The router instance number |
|
Router Name |
The name of the router instance |
|
ECMP |
False — ECMP is disabled for the instance True — ECMP is enabled for the instance |
|
Configured-ECMP-Routes |
The number of ECMP routes configured for path sharing |
edit-ipoe-session
edit-ipoe-session
Syntax
edit-ipoe-session sap sap-id mac mac-address [ subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [ inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [app-profile-string app-profile-string] [ circuit-id circuit-id] [remote-id remote-id]
Context
[Tree] (tools>perform>subscr-mgmt edit-ipoe-session)
Full Context
tools perform subscriber-mgmt edit-ipoe-session
Description
This command updates the data of the IPoE session identified with the given MAC address and SAP identifier. Optionally the remote ID and circuit ID can be specified to identify the IPoE session to update.
The changes take effect immediately.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
edit-lease-state
edit-lease-state
Syntax
edit-lease-state sap sap-id ip ip-address [ mac ieee-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [ sla-profile-string sla-profile-string] [app-profile-string [ app-profile-string] [inter-dest-id intermediate-destination-id] [ ancp-string ancp-string]
edit-lease-state svc-id service-id ip ip-address [ mac ieee-address] [ subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [app-profile-string [ app-profile-string] [inter-dest-id intermediate-destination-id] [ ancp-string ancp-string]
Context
[Tree] (tools>perform>subscr-mgmt edit-lease-state)
Full Context
tools perform subscriber-mgmt edit-lease-state
Description
This command provides the parameters to edit lease state information.
Parameters
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- ip-address
-
Modifies lease state information for the specified IP address.
- ieee-address
-
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
- sub-ident-string
-
Modifies the lease state information for the specified subscriber identification.
- sub-profile-string
-
Modifies lease state information for the specified subscriber profile.
- sla-profile-string
-
Modifies lease state information for the specified SLA profile.
- service-id
-
Modifies lease state information for the specified service ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
edit-ppp-session
edit-ppp-session
Syntax
edit-ppp-session sap sap-id [user-name user-name] [ mac mac-address] [session-id session-id] [ ip-address ip-address] [subscriber sub-ident-string] [ sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ ancp-string ancp-string] [app-profile-string app-profile-string]
edit-ppp-session svc service-id [user-name user-name] [mac mac-address] [session-id session-id] [ip-address ip-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [ sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [ app-profile-string app-profile-string]
Context
[Tree] (tools>perform>subscr-mgmt edit-ppp-session)
Full Context
tools perform subscriber-mgmt edit-ppp-session
Description
This command updates the data of the PPP session identified with the given MAC address and SAP identifier. Optionally the remote-id and circuit-id can be specified to identify the IPoE session to update.
The changes take immediate effect.
Parameters
- sap-id
-
Specifies a SAP ID, up to 255 characters.
- user-name
-
Specifies the PPP user name, up to 253 characters.
- mac-address
-
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.
- session-id
-
Specifies information about the ID of the PPP session.
- sub-ident-string
-
Specifies an existing subscriber identification profile.
- sla-profile-string
-
Identifies the SLA profile string up, to 16 characters.
- ip-address
-
Specifies the peer’s IP address.
- service-id
-
Specifies an existing subscriber service ID.
- sub-profile-string
-
Specifies the subscriber profile string, up to 16 characters.
- sub-profile-name
-
Specifies the subscriber profile name, up to 32 characters.
- intermediate-destination-id
-
Specifies the intermediate destination identifier which is encoded in the identification strings, up to 32 characters.
- ancp-string
-
Specifies the ASCII representation of the string, up to 63 characters.
- app-profile-string
-
Specifies the application profile string, up to 16 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
edit-slaac-host
edit-slaac-host
Syntax
edit-slaac-host sap sap-id [user-name user-name] [ mac mac-address] [session-id session-id] [ ip-address ip-address] [subscriber sub-ident-string] [ sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ ancp-string ancp-string] [app-profile-string app-profile-string]
edit-slaac-host svc service-id [user-name user-name] [mac mac-address] [session-id session-id] [ip-address ip-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [ sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [ app-profile-string app-profile-string]
Context
[Tree] (tools>perform>subscr-mgmt edit-slaac-host)
Full Context
tools perform subscriber-mgmt edit-slaac-host
Description
This command updates the data of the SLAAC host information.
Parameters
- sap-id
-
Specifies a SAP ID, up to 255 characters.
- user-name
-
Specifies the PPP user name up to 253 characters.
- mac-address
-
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.
- session-id
-
Specifies information about the ID of the PPP session.
- sub-ident-string
-
Specifies an existing subscriber identification profile.
- sla-profile-string
-
Identifies the SLA profile string up to 16 characters.
- ip-address
-
Specifies the peer’s IP address.
- service-id
-
Specifies an existing subscriber service ID.
- sub-profile-string
-
Specifies the subscriber profile string up to 16 characters.
- sub-profile-name
-
Specifies the subscriber profile name up to 32 characters.
- intermediate-destination-id
-
Specifies the intermediate destination identifier which is encoded in the identification strings up to 32 characters.
- ancp-string
-
Specifies the ASCII representation of the up to 63 characters.
- app-profile-string
-
Specifies the application profile string up to 16 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
efm-oam
efm-oam
Syntax
efm-oam
Context
[Tree] (show>system>ethernet efm-oam)
Full Context
show system ethernet efm-oam
Description
This command displays a system-level summary for EFM-OAM enabled ports. It includes the configuration, action, various states, and soft reset precedence for the protocol.
Platforms
All
Output
The following output is an example of EFM-OAM summary information.
Output Exampleshow system ethernet efm-oam
===============================================================================
System Configuration
===============================================================================
Grace Tx Enable : False
Dying Gasp On Reset : Disabled
===============================================================================
Active Port Configuration & State Summary
===============================================================================
Fault Header:
LinkMonitor: F = Frame, FP = Period, FS = Summary, SP = Symbol
LocalSfAct : CE = Critical, DG = Dying Gasp, EV = Event, PT = Port
PeerRDIRx : CE = Critical, DG = Dying Gasp, LF = Link, EV = Event
Table Legend
- = Not Configured, c = Configured, * = SF Active, s = Shutdown, l = Log Only
Soft Reset Header:
Gasp : T = True, F = False (A = active, I = inactive)
Grace: T = True, F = False (A = active, I = inactive)
SR (Action on Soft Reset): - = None, DG = Dying Gasp, G = Grace TLV
TF (Trigger-Fault):
- = Not configured, DG = Dying Gasp, CE = Critical Event
============================================================================
Port States LinkMonitor LocalSfAct PeerRdiRx SoftReset TF
EFM LM F FP FS SP CE DG EV PT CE DG LF EV Gasp Grace SR
----------------------------------------------------------------------------
1/1/1 Up Dn - - - - - - - s s s s l T(I) T(I) - -
1/1/6 Dn Dn - - - - - - - s s s s l T(I) T(I) - -
----------------------------------------------------------------------------
No. of ports EFM enabled: 2
============================================================================
efm-oam
Syntax
efm-oam
Context
[Tree] (clear>port>ethernet efm-oam)
Full Context
clear port ethernet efm-oam
Description
This command clears EFM-OAM statistics on the port.
Platforms
All
efm-oam
Syntax
efm-oam
Context
[Tree] (show>port>ethernet efm-oam)
Full Context
show port ethernet efm-oam
Description
This command displays EFM-OAM information.
Platforms
All
egress-if
egress-if
Syntax
egress-if port-id [summary | detail] [family]
Context
[Tree] (show>router>ldp>bindings>active egress-if)
Full Context
show router ldp bindings active egress-if
Description
This command displays LDP active bindings by matching the egress interface.
Parameters
- port-id
-
Specifies the port ID.
- family
-
Specifies the address family.
Platforms
All
egress-label
egress-label
Syntax
egress-label start-label [end-label]
Context
[Tree] (show>service egress-label)
Full Context
show service egress-label
Description
This command displays service information using the range of egress labels.
If only the mandatory egress-label1 parameter is specified, only services using the specified label are displayed.
If both start-label and end-label parameters are specified, the services using the range of labels X where start-label <= X <= end-label are displayed.
Use the show router ldp bindings command to display dynamic labels.
Parameters
- start-label
-
The starting egress label value for the label range. If only start-label is specified, services only using start-label are displayed.
- end-label
-
The ending egress label value for the label range.
Platforms
All
Output
The following output is an example of service egress label information.
Output Example*A:ALA-12# show service egress-label 0 10000
==============================================================================
Martini Service Labels
==============================================================================
Svc Id Sdp Id Type I.Lbl E.Lbl
------------------------------------------------------------------------------
1 10:1 Mesh 0 0
1 20:1 Mesh 0 0
1 30:1 Mesh 0 0
1 100:1 Mesh 0 0
...
1 107:1 Mesh 0 0
1 108:1 Mesh 0 0
1 300:1 Mesh 0 0
1 301:1 Mesh 0 0
1 302:1 Mesh 0 0
1 400:1 Mesh 0 0
1 500:2 Spok 131070 2001
1 501:1 Mesh 131069 2000
100 300:100 Spok 0 0
200 301:200 Spok 0 0
300 302:300 Spok 0 0
400 400:400 Spok 0 0
------------------------------------------------------------------------------
Number of Bindings Found : 23
==============================================================================
*A:ALA-12#
Show Service Egress Command Output Fields describes show service egress label output fields.
|
Label |
Description |
|---|---|
|
Svc Id |
The ID that identifies a service. |
|
Sdp Id |
The ID that identifies an SDP. |
|
Type |
Indicates whether the SDP binding is a spoke or a mesh. |
|
I. Lbl |
The VC label used by the far-end device to send packets to this device in this service by the SDP. |
|
E. Lbl |
The VC label used by this device to send packets to the far-end device in this service by the SDP. |
|
Number of bindings found |
The total number of SDP bindings that exist within the specified egress label range. |
egress-lsp
egress-lsp
Syntax
egress-lsp tunnel-id [summary | detail] [family]
Context
[Tree] (show>router>ldp>bindings>active egress-lsp)
Full Context
show router ldp bindings active egress-lsp
Description
This command displays LDP active bindings by matching the egress LSP.
Parameters
- tunnel-id
-
Specifies the tunnel ID.
- family
-
Specifies the address family.
Platforms
All
egress-nh
egress-nh
Syntax
egress-nh [family] [summary | detail] ip-address
Context
[Tree] (show>router>ldp>bindings>active egress-nh)
Full Context
show router ldp bindings active egress-nh
Description
This command displays LDP active bindings by matching the egress Next-Hop (NH).
Parameters
- family
-
Specifies the address family.
- ip-address
-
Specifies the IPv4 or IPv6 address.
Platforms
All
egress-pbr
egress-pbr
Syntax
egress-pbr [detail]
Context
[Tree] (tools>dump>filter>resources egress-pbr)
Full Context
tools dump filter resources egress-pbr
Description
This command displays the number of allocated unique egress PBR destinations.
Parameters
- detail
-
Displays number of allocated unique egress PBR destinations together with a list of destinations and their ref counts.
Platforms
All
Output
The following output is an example of filter resource egress PBR destination information.
Output Example*A:Dut-C>tools dump filter resources egress-pbr
===============================
Egress PBR destinations
===============================
Name Count
-------------------------------
All destinations 8
Unique destinations 4
===============================
*A:Dut-C# tools dump filter resources egress-pbr detail
===============================================================================
Unique egress PBR destinations
===============================================================================
Num Action Ref. count Parameters
-------------------------------------------------------------------------------
1 Esi L3 1 esi 00:00:00:00:00:00:00:00:00:01
ip 5.5.1.5
if VasToFromAccess
rtr 123
-------------------------------------------------------------------------------
2 Esi L3 2 esi 00:00:00:00:00:00:00:00:00:02
ip 5.5.0.5
if VasToFromNetwork
rtr 123
-------------------------------------------------------------------------------
3 Red-pol 3 name egress-pbr
-------------------------------------------------------------------------------
4 Red-pol 2 name ingress-pbr
===============================================================================
egress-rate-distribution
egress-rate-distribution
Syntax
egress-rate-distribution
Context
[Tree] (show>lag egress-rate-distribution)
Full Context
show lag egress-rate-distribution
Description
This command displays adaptive load-balancing egress rate distribution information.
Platforms
All
egress-statistics
egress-statistics
Syntax
egress-statistics color color [end-point {ipv4-address | ipv6-address}]
Context
[Tree] (show>router>segment-routing>sr-policies egress-statistics)
Full Context
show router segment-routing sr-policies egress-statistics
Description
This command displays the egress traffic statistics of the SR policy specified by its color and end-point.
Parameters
- color
-
Displays the color that is configured for this SR policy.
- ipv4-address | ipv6-address
-
Displays the IPv4 or IPv6 address expressed in dotted decimal notation.
Platforms
All
Output
The following output is an example of egress traffic statistics of the SR policy, and Show Egress Statistics Field Descriptions describes the output fields.
Output Example Show Router Segment Route Policy Egress Statistics# show router segment-routing sr-policies egress-statistics color 20102011 end-point 10.8.100.12
===============================================================================
SR-Policies Egress Statistics
===============================================================================
Egress Statistics:
Color : 20102011 Endpoint Addr : 10.8.100.12
Segment-List : 1
TunnelId : 917548 BSID : 180001
Pkt Count : 0 Octet Count : 0
Egress Statistics:
Color : 20102011 Endpoint Addr : 10.8.100.12
Segment-List : 2
TunnelId : 917548 BSID : 180001
Pkt Count : 0 Octet Count : 0
===============================================================================
#
show router segment-routing sr-policies egress-statistics color 10 end-point 3ffe::a14:102
===============================================================================
SR-Policies Egress Statistics
===============================================================================
Egress Statistics:
Color : 10 Endpoint Addr : 3ffe::a14:102
Segment-List : 1
TunnelId : 917520 BSID : 100008
Pkt Count : 3015 Octet Count : 313560
===============================================================================
|
Label |
Description |
|---|---|
|
Color |
Indicates the color of the SR policy. |
|
Endpoint Addr |
Indicates the endpoint address of the SR policy. |
|
Segment-List |
Indicates the index of the segment list. |
|
TunnelId |
Indicates the tunnel identifier of the SR policy. |
|
BSID |
Indicates the binding SID value. |
|
Pkt Count |
Indicates the count of packets for the corresponding segment list. |
|
Octet Count |
Indicates the count of octets for the corresponding segment list. |
egress-statistics
Syntax
egress-statistics color color [end-point {ipv4-address | ipv6-address}]
Context
[Tree] (clear>router>segment-routing>sr-policies egress-statistics)
Full Context
clear router segment-routing sr-policies egress-statistics
Description
This command clears the egress traffic statistics of the SR policy specified by its color and end-point.
Parameters
- color
-
Displays the color that is configured for this SR policy.
- ipv4-address | ipv6-address
-
Displays the IPv4 or IPv6 address expressed in dotted decimal notation.
Platforms
All
egress-statistics
Syntax
egress-statistics color [0..4294967295] endpoint ip-address | ipv6-address [interval seconds] [repeat repeat]
Context
[Tree] (monitor>router>seg-rt>sr-policies egress-statistics)
Full Context
monitor router segment-routing sr-policies egress-statistics
Description
This command monitors SR Policy Egress Statistics.
Parameters
- ip-address
-
Specifies the IPv4 address of the endpoint.
- ipv6-address
-
Specifies the IPv6 address of the endpoint.
- seconds
-
Configures the interval for each display in seconds.
- repeat
-
Configures how many times the command is repeated.
Platforms
All
elmi
elmi
Syntax
elmi
Context
[Tree] (show elmi)
Full Context
show elmi
Description
This command displays Ethernet Link Management Interface (E-LMI) information.
Output Fields: show elmi describes the output fields for the show elmi command.
|
Field |
Description |
|---|---|
|
Link Status |
Status of the E-LMI protocol when the elmi mode is set to uni-n. Link Status will indicate up if E-LMI mode is set to "none". |
|
T391 |
Pooling timer used by UNI-C. UNI-N will send the consecutive single EVC asynchronous status messages every (T391/10) rounded to the second interval. |
|
T392 |
Pooling verification timer for UNI-N |
|
N393 |
Status counter for UNI-N. |
|
Rx Enq. Time |
Last time a status inquiry message was received from UNI-C. |
|
Rx Enq. Msg |
Number of status inquiry messages received. |
|
Rx Check Time |
Last time a status inquiry E-LMI check message was received. |
|
Rx Inv. SeqNum |
Counts the number of E-LMI messages received with invalid sequence number. |
|
Enq Timeouts |
Counts the number of T392 timer expired. |
|
Tx Status Time |
Last time a status message was sent by UNI-N. |
|
Tx Status Msg |
Number of status messages sent by UNI-N. |
|
Tx Check Time |
Last time a status E-LMI check message was sent by UNI-N. |
|
Tx Async Status Msg |
Counter for single EVC asynchronous status messages sent by UNI-N. |
|
Discard Msg |
Counter for the status inquiry messages discarded due to errors. |
Platforms
All
encryption-keygroup
encryption-keygroup
Syntax
encryption-keygroup keygroup-id [spi spi]
Context
[Tree] (show>grp-encryp encryption-keygroup)
Full Context
show group-encryption encryption-keygroup
Description
This command displays NGE information for a key group.
Parameters
- keygroup-id
-
Specifies the key group identifier to use for the output display.
- spi
-
Specifies the SPI to use for the output display.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of encryption key group information, and Show Encryption Key Group Output Fields describes the fields.
Output Exampledomain1>show>grp-encryp# encryption-keygroup 2
===============================================================================
Encryption Keygroup Configuration Detail
===============================================================================
Keygroup Id : 2
Keygroup Name : KG1_secure
Description : Most_secure_KG
Authentication Algo: sha256
Encryption Algo : aes128
Active Outbound SA : 6
Activation Time : 04/20/2015 20:07:31
-------------------------------------------------------------------------------
Security Associations
-------------------------------------------------------------------------------
Spi : 2
Install Time : 04/20/2015 20:08:17
Key CRC : 0x806fb970
Spi : 6
Install Time : 04/20/2015 19:43:40
Key CRC : 0xa4f2d262
-------------------------------------------------------------------------------
Encryption Keygroup Forwarded Statistics
-------------------------------------------------------------------------------
Encrypted Pkts : 0 Encrypted Bytes : 0
Decrypted Pkts : 0 Decrypted Bytes : 0
-------------------------------------------------------------------------------
Encryption Keygroup Outbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard : 0 Unsupported Uplink : 0
Enqueue Error : 0 Other : 0
-------------------------------------------------------------------------------
Encryption Keygroup Inbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard : 0 Invalid Spi : 0
Authentication Failure *: 0 Control Word Mismatch : 0
Padding Error : 0 Enqueue Error : 0
Other : 0
-------------------------------------------------------------------------------
---------------------------------------------
SDP Keygroup Association Table
---------------------------------------------
SDP ID Direction
---------------------------------------------
61 Inbound Outbound
---------------------------------------------
Inbound Keygroup SDP Association Count: 1
Outbound Keygroup SDP Association Count: 1
---------------------------------------------
VPRN Keygroup Association Table
---------------------------------------------
VPRN SVC ID Direction
---------------------------------------------
12 Inbound Outbound
---------------------------------------------
Inbound Keygroup VPRN Association Count: 1
Outbound Keygroup VPRN Association Count: 1
---------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
domain1>show>grp-encryp#
domain1# show group-encryption encryption-keygroup 1 spi 1
===============================================================================
Encryption Keygroup Security Association Detail
===============================================================================
Keygroup Id : 1 SPI Id : 1
Install Time : 06/16/2015 11:28:49
Key CRC : 0x36e5af55
-------------------------------------------------------------------------------
Encryption Keygroup Security Association Forwarded Statistics
-------------------------------------------------------------------------------
Encrypted Pkts : 1662534 Encrypted Bytes : 837917136
Decrypted Pkts : 1662333 Decrypted Bytes : 837815832
-------------------------------------------------------------------------------
Encryption Keygroup Security Association Outbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard : 0 Enqueue Error : 0
Other : 0
-------------------------------------------------------------------------------
Encryption Keygroup Security Association Inbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard : 0 Authentication Failure : 0
Control Word Mismatch : 0 Padding Error : 0
Enqueue Error : 0 Other : 0
===============================================================================
|
Label |
Description |
|---|---|
|
Encryption Keygroup Configuration Detail |
|
|
Keygroup Id |
The key group identifier |
|
Keygroup Name |
The key group name |
|
Description |
The key group description |
|
Authentication Algo |
The authentication algorithm used for the key group |
|
Encryption Algo |
The encryption algorithm used for the key group |
|
Active Outbound SA |
The active outbound SA for the key group |
|
Activation Time |
The date and time that the key group was activated |
|
Security Associations |
|
|
Spi |
The security parameter index for the SA in the key group |
|
Install Time |
The date and time that the SA was installed in the key group |
|
Key CRC |
The CRC for the key belonging to the SA |
|
Encryption Keygroup Forwarded Statistics |
|
|
Encrypted Pkts |
The number of encrypted packets forwarded by the key group |
|
Encrypted Bytes |
The number of encrypted bytes forwarded by the key group |
|
Decrypted Pkts |
The number of decrypted packets forwarded by the key group |
|
Decrypted Bytes |
The number of decrypted bytes forwarded by the key group |
|
Encryption Keygroup Outbound Discarded Statistics (Pkts) |
|
|
Total Discard |
The total number of outbound packets discarded by the key group |
|
Unsupported Uplink |
The total number of outbound packets discarded by the key group due to an unsupported uplink |
|
Enqueue Error |
The total number of outbound packets discarded by the key group due to an enqueuing error |
|
Other |
The total number of outbound packets discarded by the key group due to some other reason, such as an internal configuration error (for example, a key group that points to an SA, but the SA is not valid) |
|
Encryption Keygroup Inbound Discarded Statistics (Pkts) |
|
|
Total Discard |
The total number of inbound packets discarded by the key group |
|
Invalid Spi |
The total number of inbound packets discarded by the key group due to an invalid SPI |
|
Authentication Failure * |
The total number of inbound packets discarded by the key group due to an authorization failure |
|
Control Word Mismatch |
The total number of inbound packets discarded by the key group due to a control word (CW) mismatch between the encrypted (protected) CW in the ESP payload and the CW that is not encrypted |
|
Padding Error |
The total number of inbound packets discarded by the key group due to a padding error |
|
Enqueue Error |
The total number of inbound packets discarded by the key group due to an enqueuing error |
|
Other |
The total number of inbound packets discarded by the key group due to some other reason (for example, an incoming packet length is incorrect) |
|
SDP Keygroup Association Table |
|
|
SDP ID |
The SDP ID |
|
Direction |
The direction in which key group authentication and encryption occurs for traffic on the SDP |
|
Inbound Keygroup SDP Association Count |
The number of SDPs configured to use inbound SA |
|
Outbound Keygroup SDP Association Count |
The number of SDPs configured to use outbound SA |
|
VPRN Keygroup Association Table |
|
|
VPRN SVC ID |
The VPRN service identifier |
|
Direction |
The direction in which key group authentication and encryption occurs for traffic on the VPRN |
|
Inbound Keygroup VPRN Association Count |
The number of VPRNs configured to use inbound SA |
|
Outbound Keygroup VPRN Association Count |
The number of VPRNs configured to use outbound SA |
encryption-keygroup
Syntax
encryption-keygroup keygroup-id
encryption-keygroup keygroup-id spi spi
Context
[Tree] (clear>grp-encryp encryption-keygroup)
Full Context
clear group-encryption encryption-keygroup
Description
This command clears NGE information for a key group.
Parameters
- keygroup-id
-
Specifies the key group identifier.
- spi
-
Specifies the SPI ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
end-sid
end-sid
Syntax
end-sid [mt {0 | 2}] [ prefix ipv6-prefix[/prefix-length]] [adv-router system-id | hostname] [ algo algo-id]
Context
[Tree] (show>router>isis>srv6 end-sid)
Full Context
show router isis segment-routing-v6 end-sid
Description
This command displays IS-IS SRv6 End SIDs.
Parameters
- ipv6-prefix[/prefix-length]
-
Displays routes only matching the specified ip-address and length.
- system-id | hostname
-
Displays information for the specific IS-IS advertising router. The host name can be up to 38 characters.
- algo-id
-
Displays information for the specified algorithm.
Platforms
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR
endpoint
endpoint
Syntax
endpoint [endpoint-name]
Context
[Tree] (show>service>id endpoint)
Full Context
show service id endpoint
Description
This command displays service endpoint information.
Parameters
- endpoint-name
-
Specifies the name of an existing endpoint for the service.
Platforms
All
Output
The following output is an example of service endpoint information.
Output Example*A:ALA-48>config>service>epipe# show service id 6 endpoint
===============================================================================
Service 6 endpoints
===============================================================================
Endpoint name : x
Revert time : 0
Act Hold Delay : 0
Tx Active : none
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
No members found.
===============================================================================
Endpoint name : y
Revert time : 0
Act Hold Delay : 0
Tx Active : none
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
No members found.
===============================================================================
*A:ALA-48>config>service>epipe#
endpoint
Syntax
endpoint [{ip-address | ipv6-address}] [ detail]
endpoint [{ip-address | ipv6-address}] egress-stats
Context
[Tree] (show>router>mpls>forwarding-policies endpoint)
Full Context
show router mpls forwarding-policies endpoint
Description
This command displays the MPLS forwarding policy endpoint information.
Parameters
- ip-address
-
Specifies the IPv4 address of the endpoint up to 64 characters.
- ipv6-address
-
Specifies the IPv6 address of the endpoint up to 64 characters.
- detail
-
Specifies detailed information for the endpoint.
- egress-stats
-
Displays the egress statistics, if any, of all the instances of the specified forwarding policy.
Platforms
All
Output
MPLS Endpoint Output Fields describes MPLS endpoint output fields.
|
Label |
Description |
|---|---|
|
Endpoint |
Specifies the endpoint IP address. |
|
Preference |
Specifies the preference. |
|
Policy Name |
Specifies the MPLS forwarding policies binding label name. |
|
Active |
Specifies the active state (Y | N). |
|
InactiveReason |
Specifies the inactive reason. |
|
Last Updated |
Specifies the date and time of the last update. |
|
Num Grps |
Specifies the number of groups. |
|
OperState |
Specifies the operational state (up | down). |
|
Metric |
Specifies the metric value. |
|
TTM Preference |
Specifies the TTM preference value. |
|
Revert Timer |
Specifies the revert timer value. |
|
Path Pref |
Specifies the path preference. |
|
Retry Count |
Specifies the retry count. |
|
Next Retry In |
Specifies the next retry value. |
|
Next-hop Group |
Specifies the next-hop group. |
|
Resolution Type |
Specifies the resolution type (direct | indirect). |
|
Oper State |
Specifies the operational state (down | up). |
|
Oper Down Reas* |
Specifies the reason for being operationally down. |
|
Num Revert |
Specifies the number of reverts. |
|
Num Failover |
Specifies the number of failovers. |
|
Next Revert In |
Specifies the next revert interval. |
|
Weight |
Specifies the weight value. |
|
Primary |
Specifies the IP address of the primary next-hop. |
|
Resolved |
Specifies the resolved status (false | true). |
|
Down Reason |
Specifies the down reason. |
|
Backup |
Specifies the IP address of the backup next-hop. |
|
StatsOperState |
Specifies if a statistic index is allocated to the next-hop. |
|
EgrStatsState |
Specifies if all next-hops have a statistic index allocated. |
A:Dut-C# show router mpls forwarding-policies endpoint detail
===============================================================================
Endpoint (Detail)
===============================================================================
Endpoint : 10.20.1.2 Preference : 255
Policy Name : one
Active : N InactiveReason : Not Applicable
Last Updated : 09/27/2018 22:51:26 Num Grps : 2
Metric : 0 TTM Preference : 255
Revert Timer : 0 Path Pref : 255
Retry Count : 0 Next Retry In : 0
Nexthop Group : 1 Resolution Type: direct
Oper State : Down OperDownReason : Not Applicable
Num Revert : 0 Num Failover : 0
Next Revert In : 0 Weight : 0
Primary : 10.10.3.2
Resolved : False Down Reason : Not Applicable
Backup : 10.10.12.2
Resolved : False Down Reason : Not Applicable
Nexthop Group : 2 Resolution Type: direct
Oper State : Down OperDownReason : Not Applicable
Num Revert : 0 Num Failover : 0
Next Revert In : 0 Weight : 45
Primary : 10.10.3.3
Resolved : False Down Reason : Not Applicable
Backup : 10.10.4.4
Resolved : False Down Reason : Not Applicable
-------------------------------------------------------------------------------
*A:Dut-B# show router mpls forwarding-policies endpoint
===============================================================================
Endpoint Table
===============================================================================
Endpoint Preference Active
-------------------------------------------------------------------------------
10.20.1.5 2 Y
-------------------------------------------------------------------------------
No. of Tunnels: 1
show router mpls forwarding-policies endpoint 10.20.1.5 egress-stats
===============================================================================
Endpoint (Detail)
===============================================================================
Endpoint : 10.20.1.5 Preference : 255
Policy Name : cc Oper State : Up
EgrStatsState : Up
Next-hop Group : 1
Primary nexthop : 10.10.5.5
StatsOperState : Up
Aggr Pkts: 11000 Aggr Octets: 11550000
Backup nexthop : 10.10.11.4
StatsOperState : Up
Aggr Pkts: 11000 Aggr Octets: 11550000
Next-hop Group : 2
Primary nexthop : 10.10.5.5
StatsOperState : Up
Aggr Pkts: 11000 Aggr Octets: 11550000
Backup nexthop : 10.10.11.4
StatsOperState : Up
Aggr Pkts: 11000 Aggr Octets: 11550000
Total Aggr :
Aggr Pkts: 44000 Aggr Octets: 46200000
-------------------------------------------------------------------------------
===============================================================================
entry
entry
Syntax
entry entry-id
Context
[Tree] (tools>perform>filter>ip-filter entry)
Full Context
tools perform filter ip-filter entry
Description
Commands in this context perform IP filter entry operations.
Parameters
- entry-id
-
Specifies a particular entry ID.
Platforms
All
entry
Syntax
entry entry-id
Context
[Tree] (tools>perform>filter>ipv6-filter entry)
Full Context
tools perform filter ipv6-filter entry
Description
Commands in this context perform IPv6 filter entry operations.
Parameters
- entry-id
-
Specifies a particular entry ID.
Platforms
All
entry
Syntax
entry entry-id
Context
[Tree] (tools>perform>filter>mac-filter entry)
Full Context
tools perform filter mac-filter entry
Description
Commands in this context perform MAC filter entry operations.
Parameters
- entry-id
-
Specifies a particular entry ID.
Platforms
All
epipe
epipe
Syntax
epipe
Context
[Tree] (show>service>id epipe)
Full Context
show service id epipe
Description
This command displays Epipe services associated with the B-VPLS service. The command only applies when the service is a B-VPLS.
Platforms
All
Output
The following output is an example of Epipe service information.
Output Example*A:term17>show>service>id# epipe
===============================================================================
Related Epipe services for bVpls service 2000
===============================================================================
Epipe SvcId Oper ISID Admin Oper
-------------------------------------------------------------------------------
100 100 Down Down
-------------------------------------------------------------------------------
Number of Entries : 1
-------------------------------------------------------------------------------
*A:term17>show>service>id#
epipe-map-access-to-egress-port
epipe-map-access-to-egress-port
Syntax
epipe-map-access-to-egress-port service service-id [end-service service-id] | lag lag-id summary
Context
[Tree] (tools>dump epipe-map-access-to-egress-port)
Full Context
tools dump epipe-map-access-to-egress-port
Description
This command will display the egress port that will be used to transmit traffic associated with the displayed Epipe service(s). The information displayed shows the egress port for traffic traveling from SAP to egress SDP or SAP.
This command will support Epipe services with the following combinations:
-
SAP to SDP (with no endpoint configuration)
-
SAP to SAP (with or without an ICB)
-
SAP to SDP using endpoints with 1 or 2 SDPs
The command can be executed by specifying either a service ID, service-ID range or an ingress LAG ID.
This command will not display the egress port for traffic traveling from the SDP to egress SAP. This command also does not work with services that use policers or shared queues and also does not support PBB services.
This command replaces the command tools dump epipe-map-to-network, which has been deprecated.
Parameters
- service service-id
-
Identifies the service ID for which the command will return the egress port. If used in conjunction with the end-service parameter, this value represent the beginning of the service ID range for which the command will be executed against.
- end-service service-id
-
This parameter is used to identify the end of the service ID range for which the command will be executed against.
- lag-id
-
This parameter caused the command to return the egress port for all service with SAPs associated with the specified LAG ID.
Platforms
All
epipe-sap-template
epipe-sap-template
Syntax
epipe-sap-template
epipe-sap-template name
Context
[Tree] (show>service>template epipe-sap-template)
Full Context
show service template epipe-sap-template
Description
This command displays Epipe SAP template information.
Parameters
- name
-
Specifies the Epipe SAP template name, up to 32 characters.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
error-codes
error-codes
Syntax
error-codes
Context
[Tree] (show>app-assure>http-redirect error-codes)
Full Context
show application-assurance http-redirect error-codes
Description
This command displays http-error-redirect error-codes.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of HTTP error redirect error code information, and Show Application Assurance HTTP Redirect Error Codes Output Fields describes the fields.
Output Example*A:Dut-C>show application-assurance http-error-redirect error-codes
===============================================================================
Application-Assurance http-error-redirect error-codes
===============================================================================
Code Description Default custom-msg-size
-------------------------------------------------------------------------------
400 Bad Request 1024
401 Unauthorized 1024
402 Payment Required 1024
403 Forbidden 1024
404 Not Found 1024
405 Method Not Allowed 1024
406 Not Acceptable 1024
407 Proxy Authentication Required 1024
408 Request Timeout 1024
409 Conflict 1024
410 Gone 1024
411 Length Required 1024
412 Precondition Failed 1024
413 Payload Too Large 1024
414 URI Too Long 1024
415 Unsupported Media Type 1024
416 Range Not Satisfiable 1024
417 Expectation Failed 1024
421 Misdirected Request 1024
422 Unprocessable Entity 1024
423 Locked 1024
424 Failed Dependency 1024
425 Too Early 1024
426 Upgrade Required 1024
427 Unassigned 1024
428 Precondition Required 1024
429 Too Many Requests 1024
430 Unassigned 1024
431 Request Header Fields Too Large 1024
451 Unavailable For Legal Reasons 1024
500 Internal Server Error 1024
501 Not Implemented 1024
502 Bad Gateway 1024
503 Service Unavailable 1024
504 Gateway Timeout 1024
505 HTTP Version Not Supported 1024
506 Variant Also Negotiates 1024
507 Insufficient Storage 1024
508 Loop Detected 1024
509 Unassigned 1024
510 Not Extended 1024
511 Network Authentication Required 1024
730 Custom Error Code 1024
731 Custom Error Code 1024
735 Custom Error Code 1024
===============================================================================
|
Label |
Description |
|---|---|
|
Description |
Describes the error |
|
Default |
Indicates what the default is for the error |
|
custom-msg-size (Custom Message Size) |
The size of the message |
error-codes
Syntax
error-codes
Context
[Tree] (show>app-assure>http-err-redirect error-codes)
Full Context
show application-assurance http-error-redirect error-codes
Description
This command displays HTTP error redirect error codes.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
error-counters
error-counters
Syntax
error-counters
Context
[Tree] (tools>dump>test-oam>twamp>server error-counters)
Full Context
tools dump test-oam twamp server error-counters
Description
This command dumps various error counters related to TWAMP server and TWAMP test.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of various error counters related to TWAMP server and TWAMP test.
Output Exampletools>dump>test-oam>twamp>server# error-counters
Dropped Connection Stats
------------------------
TCP connection closed : 0
TCP connection error : 0
Unexpected event : 0
Error sending message : 0
Error waiting for message : 0
Connection not in a prefix : 0
Max global limit : 0
Max prefix limit : 0
No mode specified : 0
Unsupported mode : 0
Invalid command : 0
Stop-sessions with bad session count : 0
Connection timeout : 0
Internal resource : 0
Invalid zero SID : 0
Invalid HMAC : 0
Dropped Connection States
-------------------------
Idle : 0
Set-up-wait : 0
Started : 0
Active : 0
Process Start : 0
Process Stop : 0
Process TW-session : 0
Rejected Session Stats
----------------------
Invalid address version: 0
Non-local destination : 0
Bad type-p : 0
Padding too big : 0
MBZ value is non-zero : 0
SID is non-zero : 0
Timeout too large : 0
Max global sessions : 0
Max prefix sessions : 0
Socket error : 0
Source unreachable : 0
Port in use : 0
Duplicate session : 0
Internal resource : 0
REFWAIT timeout : 0
Dropped Test Packet Stats
-------------------------
Packet wrong size : 0
Wrong source address : 0
Arrived before start time : 0
No Start-sessions : 0
Invalid error estimate : 0
Error sending reply : 0
Invalid Server Octets : 0
Invalid Symmetric MBZ : 0
errors
errors
Syntax
errors
Context
[Tree] (clear>subscr-mgmt errors)
Full Context
clear subscriber-mgmt errors
Description
This command clears all errors in the circular buffer.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
errors
Syntax
errors
Context
[Tree] (show>subscr-mgmt errors)
Full Context
show subscriber-mgmt errors
Description
This command clears all errors in the circular buffer.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
es-pbr
es-pbr
Syntax
es-pbr
Context
[Tree] (show>service>id es-pbr)
Full Context
show service id es-pbr
Description
When a filter with an action forward esi is successfully added to a VPLS service and the PE receives an EVPN Auto-Discovery route for the configured ESI, this command displays the PBR VXLAN bindings auto-created, including the ESI, the VXLAN VTEP:VNI and the status of the binding.
Platforms
All
Output
Output ExampleA:PE1# show service id 301 es-pbr
===============================================================================
L2 ES PBR
===============================================================================
ESI Users Status
VTEP:VNI
-------------------------------------------------------------------------------
ff:00:00:00:00:00:00:00:00:01 1 Active
192.0.2.72:7272
-------------------------------------------------------------------------------
Number of entries : 1
-------------------------------------------------------------------------------
===============================================================================
esa
esa
Syntax
esa esa-id [detail]
esa
esa detail
Context
[Tree] (show esa)
Full Context
show esa
Description
This command displays ESA details.
Parameters
- detail
-
Displays detailed ESA information.
- esa-id
-
Specifies the ESA.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s
Output
Show ESA Output Fields describes the ESA output fields.
The following output is an example of ESA information.
Output ExampleA:node-2# show esa
====================================================================================
Extended Services Appliance Summary
====================================================================================
ESA Description Admin Oper Health
State State State
------------------------------------------------------------------------------------
1 up up OK
2 up up OK
====================================================================================The following output is an example of detailed ESA information.
Output ExampleA:node-2# show esa detail
===============================================================================
ESA 1
===============================================================================
Description : (Not Specified)
Admin State : up
Operational State : up
Oper flags : none
IOM Host Port(s) : 2/x1/1/c9/1
: 2/x1/1/c10/1
Hardware Health
Overall Status : OK
Power Supply 1 Status : OK
Power Supply 2 Status : OK
Power Supply Redundancy : Redundant
Power Supply Mismatch Stat*: No-Mismatch
Fan Status : OK
Fan Redundancy : Redundant
Temperature Status : OK
Hardware Data
System manufacturer : HPE
System product name : ESA 400G AC
System part number : 3HE17699BA
System serial number : MXQ3210CRM
Software Version : TiMOS-H-0.0.I7505 hypervisor/esa Copyright (c)
2000-2023 Nokia. All rights reserved. All
use subject to applicable license agreements.
Built on Tue Sep 12 01:10:57 UTC 2023 by
builder in /builds/00/I7505/panos/hypervisors
Time of last boot : 2023/09/12 18:07:38 UTC
Total Cores available : 62
Total Cores allocated : 30
Total Cores remaining : 32
Total Memory available : 478 GB
Total Memory allocated : 32 GB
Total Memory remaining : 446 GB
Performance enabled : yes
Export restricted : no
NUMA Cell Topology
NUMA Cell 0
Cores Available : 31
Cores Allocated : 30
Cores Remaining : 1
Memory Available : 239 GB
Memory Allocated : 32 GB
Memory Remaining : 207 GB
Socket : 0
Host Port(i/f) : 2/x1/1/c9/1 (eth0)
Host Port(i/f) : 2/x1/1/c10/1 (eth1)
NUMA Cell 1
Cores Available : 31
Cores Allocated : 0
Cores Remaining : 31
Memory Available : 239 GB
Memory Allocated : 0 GB
Memory Remaining : 239 GB
Socket : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
ESA VMs
===============================================================================
ESA VM VM Type Cores Memory Host-Port Admin Oper
(GB) State State
-------------------------------------------------------------------------------
1 1 aa 15 16 2/x1/1/c9/1 up up/active
1 2 aa 15 16 2/x1/1/c10/1 up booting
===============================================================================
===============================================================================
ESA 2
===============================================================================
Description : (Not Specified)
Admin State : up
Operational State : up
Oper flags : none
IOM Host Port(s) : 1/1/c3/1
Hardware Health
Overall Status : OK
Power Supply 1 Status : OK
Power Supply 2 Status : OK
Power Supply Redundancy : Redundant
Power Supply Mismatch Stat*: No-Mismatch
Fan Status : OK
Fan Redundancy : Redundant
Temperature Status : OK
Hardware Data
System manufacturer : HPE
System product name : ESA 100G-2 AC
System part number : 3HE19113AA
System serial number : MXQ3210CB9
Software Version : TiMOS-H-0.0.I7505 hypervisor/esa Copyright (c)
2000-2023 Nokia. All rights reserved. All
use subject to applicable license agreements.
Built on Tue Sep 12 01:10:57 UTC 2023 by
builder in /builds/00/I7505/panos/hypervisors
Time of last boot : 2023/09/12 19:02:51 UTC
Total Cores available : 19
Total Cores allocated : 15
Total Cores remaining : 4
Total Memory available : 113 GB
Total Memory allocated : 64 GB
Total Memory remaining : 49 GB
Performance enabled : yes
Export restricted : no
NUMA Cell Topology
NUMA Cell 0
Cores Available : 19
Cores Allocated : 15
Cores Remaining : 4
Memory Available : 113 GB
Memory Allocated : 64 GB
Memory Remaining : 49 GB
Socket : 0
Host Port(i/f) : 1/1/c3/1 (eth0)
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
ESA VMs
===============================================================================
ESA VM VM Type Cores Memory Host-Port Admin Oper
(GB) State State
-------------------------------------------------------------------------------
2 1 aa 15 64 1/1/c3/1 up up
===============================================================================The following output is an example of information about a specific ESA.
Output ExampleA:node-2# show esa 1
===============================================================================
ESA 1
===============================================================================
Description : (Not Specified)
Admin State : up
Operational State : up
Oper flags : none
IOM Host Port(s) : 2/x1/1/c9/1
: 2/x1/1/c10/1
Hardware Health
Overall Status : OK
Hardware Data
System manufacturer : HPE
System product name : ESA 400G AC
System part number : 3HE17699BA
System serial number : MXQ3210CRM
Software Version : TiMOS-H-0.0.I7507 hypervisor/esa Copyright (c)
2000-2023 Nokia. All rights reserved. All
use subject to applicable license agreements.
Built on Thu Sep 14 01:12:52 UTC 2023 by
builder in /builds/00/I7507/panos/hypervisors
Time of last boot : 2023/09/14 15:25:33 UTC
Total Cores available : 62
Total Cores allocated : 30
Total Cores remaining : 32
Total Memory available : 478 GB
Total Memory allocated : 32 GB
Total Memory remaining : 446 GB
Performance enabled : yes
Export restricted : no
===============================================================================
===============================================================================
ESA VMs
===============================================================================
ESA VM VM Type Cores Memory Host-Port Admin Oper
(GB) State State
-------------------------------------------------------------------------------
1 1 aa 15 16 2/x1/1/c9/1 up up/active
1 2 aa 15 16 2/x1/1/c10/1 up up/active
===============================================================================The following output is an example of detailed information about a specific ESA.
Output ExampleA:node-2# show esa 2 detail
===============================================================================
ESA 2
===============================================================================
Description : (Not Specified)
Admin State : up
Operational State : up
Oper flags : none
IOM Host Port(s) : 1/1/c3/1
Hardware Health
Overall Status : OK
Power Supply 1 Status : OK
Power Supply 1 Temperature : 40 Degrees C.
Power Supply 1 Voltage : 114 Volts
Power Supply 1 Output : 178 Watts
Power Supply 1 Max Power : 181 Watts
Power Supply 2 Status : OK
Power Supply 2 Temperature : 45 Degrees C.
Power Supply 2 Voltage : 115 Volts
Power Supply 2 Output : 199 Watts
Power Supply 2 Max Power : 201 Watts
Power Supply Redundancy : Redundant
Power Supply Mismatch Stat*: No-Mismatch
Fan Status : OK
Fan Redundancy : Redundant
CPU 1 Temperature : 73 Degrees C.
CPU 1 Temperature Threshold: 96 Degrees C.
CPU 2 Temperature : 60 Degrees C.
CPU 2 Temperature Threshold: 96 Degrees C.
NIC 1 Temperature : 94 Degrees C.
NIC 1 Temperature Threshold: 105 Degrees C.
NIC 2 Temperature : 84 Degrees C.
NIC 2 Temperature Threshold: 105 Degrees C.
Temperature Status : OK
Hardware Data
System manufacturer : HPE
System product name : ESA 100G-2 AC
System part number : 3HE19113AA
System serial number : MXQ3210CB9
Software Version : TiMOS-H-0.0.I7505 hypervisor/esa Copyright (c)
2000-2023 Nokia. All rights reserved. All
use subject to applicable license agreements.
Built on Tue Sep 12 01:10:57 UTC 2023 by
builder in /builds/00/I7505/panos/hypervisors
Time of last boot : 2023/09/12 19:02:51 UTC
Total Cores available : 19
Total Cores allocated : 15
Total Cores remaining : 4
Total Memory available : 113 GB
Total Memory allocated : 64 GB
Total Memory remaining : 49 GB
Performance enabled : yes
Export restricted : no
NUMA Cell Topology
NUMA Cell 0
Cores Available : 19
Cores Allocated : 15
Cores Remaining : 4
Memory Available : 113 GB
Memory Allocated : 64 GB
Memory Remaining : 49 GB
Socket : 0
Host Port(i/f) : 1/1/c3/1 (eth0)
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
ESA VMs
===============================================================================
ESA VM VM Type Cores Memory Host-Port Admin Oper
(GB) State State
-------------------------------------------------------------------------------
2 1 aa 15 64 1/1/c3/1 up up
===============================================================================|
Label |
Description |
|---|---|
|
ESA |
ESA identification number |
|
Description |
Description for the ESA |
|
Admin State |
up — Administratively up |
|
down — Administratively down |
|
|
Operational State |
up — Operationally up |
|
down — Operationally down |
|
|
booting |
|
|
failed |
|
|
provisioned |
|
|
unprovisioned |
|
|
fwUpgrade — Firmware upgrade |
|
|
Oper flags |
Operational flag of the ESA |
|
IOM Host Port(s) |
IOM host port or ports in slot/mda/port format |
|
Hardware Health |
|
|
Overall Status |
Overall ESA server hardware status |
|
Unknown — ESA status not reported, ESA not connected or not booted yet |
|
|
OK — Normal |
|
|
Degraded — Aligns with flashing amber of the health LED |
|
|
Critical — Aligns with flashing red of the health LED |
|
|
Unsupported — ESA hardware status reporting is unsupported by the ESA |
|
|
Power Supply Status |
Current status of the power supply |
|
Power Supply Temperature |
Current temperature detected by the specific hardware assembly |
|
Power Supply Voltage |
Line input voltage, in volts |
|
Power Supply Output |
Current average power, in watts |
|
Power Supply Max Power |
Maximum power draw seen since power on, in watts |
|
Power Supply Redundancy |
Redundant power supply in use. In case of failure of one power supply, the server continues to operate without issue. All variants of the ESA servers come with 2 power supplies |
|
Unknown — The iLO firmware has not received device status information. After the iLO is reset when the server is powered off, some subsystems display the status Unknown. The iLO cannot update the status for these subsystems when the server is powered off. |
|
|
Redundant — There is a backup component for the device |
|
|
Non-redundant — There is no backup component for the device |
|
|
Power Supply Mismatch Stat* |
Whether different types power supplies are connected to the server |
|
true — Different types of power supplies are connected to the server |
|
|
false — The same types of power supplies are connected to the server |
|
|
Fan State |
Fan status as reported by the ESA server |
|
Unknown — Fan status not reported, ESA not connected or not booted yet |
|
|
OK — Normal |
|
|
Degraded — One or more fan is degraded while the system is powered on |
|
|
Critical — One or more fan has failed while the system is powered on |
|
|
Fan Redundancy |
Redundant fans in use. In case of failure of one or more fans, the server continues to operate without any issue. |
|
Unknown — The iLO firmware has not received device status information. After the iLO is reset when the server is powered off, some subsystems display the status Unknown. The iLO cannot update the status for these subsystems when the server is powered off. |
|
|
Redundant — All 7 backup fans are running |
|
|
Non-redundant — One or more fans have failed but at least one fan is running |
|
|
Failed — All fans have failed |
|
|
CPU Temperature |
CPU temperature as reported by the ESA |
|
CPU Temperature Threshold |
CPU temperature caution threshold as reported by the ESA A temperature threshold of 0 indicates that this functionality is not supported or cannot be retrieved from the ESA. This information is not output for ESA 400G rev AA or AB. |
|
NIC Temperature |
NIC temperature as reported by the ESA A temperature of 0 indicates that this functionality is not supported or not possible to retrieve from the ESA. |
|
NIC Temperature Threshold |
NIC temperature caution threshold as reported by the ESA A temperature threshold of 0 indicates that this functionality is not supported or cannot be retrieved from the ESA. |
|
Temperature Status |
Temperature status as reported by the ESA server |
|
Ok — Temperature within normal operating range |
|
|
Degraded — Temperature is outside the normal operating range |
|
|
Failed — Temperature exceeded configured range on the ESA |
|
|
Hardware Data |
Detailed hardware data about the ESA |
|
NUMA Cell Topology |
Number of cores, amount of memory, and Ethernet ports available to the NUMA cell |
|
VM |
VM identification number |
|
VM Type |
VM type (aa, bb, or tunnel) |
|
Cores |
Number of cores of the ESA-VM |
|
Memory (GB) |
Total memory on the ESA-VM |
esa
Syntax
esa esa-id
Context
[Tree] (clear esa)
Full Context
clear esa
Description
This command clears the statistics or status pertaining to the specified ESA.
Parameters
- esa-id
-
Specifies the ESA.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s
esa-vm
esa-vm
Syntax
esa [esa-id/vm-id] [ detail]
Context
[Tree] (show esa-vm)
Full Context
show esa-vm
Description
This command displays ESA-VM details.
Parameters
- esa-id
-
Specifies the ESA.
- vm-id
-
Specifies the VM.
- detail
-
Specifies the detailed ESA-VM information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s
Output
The following are output examples for this command.
Output Example*A:Dut-A# show esa-vm 1/1 detail
===============================================================================
ESA VM VM Type Cores Memory Admin Oper
(GB) State State
-------------------------------------------------------------------------------
1 1 aa 23 64 up up/active
===============================================================================
===============================================================================
ESA/VM 1/1
===============================================================================
Description : (Not Specified)
IOM Host Port : 1/1/c1/1
Software Version : TiMOS-M-0.0.I6237 esav-aa/esavm Nokia 7xxx ESAV Copyright
(c) 2000-2020 Nokia.
All rights reserved. All use subject to applicable
license agreements.
Built on Sun Apr 5 18:08:04 PDT 2020 by builder in /
builds/c/00/I6237/panos/main/sros
Time of last boot : 2020/04/06 20:36:12 UTC
Oper flags : none
===============================================================================
===============================================================================
VM Utilization
===============================================================================
Virtual Virtual 15min All-time
Core Role Core Id Current % Average % Peak %
-------------------------------------------------------------------------------
Mgmt-0 1 8.65 5.91 8.83
Mgmt-1 2 6.83 5.83 8.84
Mgmt-2 3 8.22 5.69 8.22
Mgmt-3 4 8.58 5.96 9.52
Worker-0 5 27.18 15.56 27.18
Worker-1 6 27.70 15.81 27.70
Worker-2 7 27.79 15.88 27.79
Worker-3 8 27.83 15.88 27.83
Worker-4 9 28.05 16.01 28.05
Worker-5 10 28.04 15.98 28.04
Worker-6 11 28.05 16.04 28.05
Worker-7 12 28.09 16.02 28.09
Worker-8 13 28.00 15.99 28.00
Worker-9 14 28.05 15.99 28.05
Worker-10 15 27.82 15.89 27.82
Worker-11 16 27.83 15.87 27.83
Worker-12 17 27.84 15.88 27.84
Worker-13 18 27.79 15.83 27.79
Worker-14 19 27.83 15.91 27.83
Worker-15 20 27.85 15.90 27.85
Worker-16 21 27.99 15.98 27.99
Worker-17 22 28.09 16.03 28.09
Worker-18 23 28.00 16.00 28.00
Worker-19 24 27.97 15.95 27.97
Worker-20 25 27.88 15.92 27.88
Worker-21 26 27.91 15.93 27.91
Worker-22 27 27.80 15.89 27.80
Worker-23 28 27.77 15.84 27.77
Worker-24 29 27.78 15.86 27.78
Worker-25 30 27.82 15.86 27.82
Worker-26 31 27.93 15.93 27.93
Worker-27 32 27.90 15.91 27.90
Worker-28 33 27.97 15.98 27.97
Worker-29 34 28.44 16.19 28.44
Worker-30 35 28.22 16.13 28.22
Worker-31 36 28.28 16.13 28.28
Worker-32 37 28.08 16.05 28.08
Worker-33 38 28.15 16.06 28.15
Worker-34 39 27.90 15.92 27.90
Worker-35 40 27.50 15.68 27.50
Worker-36 41 27.48 15.70 27.48
Worker-37 42 27.57 15.72 27.57
Idle-0 43 0.00 0.00 0.00
Scheduler-0 44 41.40 24.36 41.40
Idle-1 45 0.00 0.00 0.00
Nic-0 46 57.60 33.47 57.60
-------------------------------------------------------------------------------
===============================================================================
Show ESA-VM Output Fields describes the ESA-VM output fields.
Output Example*A:Dut-B# show esa-vm 6/1
===============================================================================
ESA VM VM Type Cores Memory Admin Oper
(GB) State State
-------------------------------------------------------------------------------
6 1 aa 4 6 up up
===============================================================================
===============================================================================
ESA/VM 6/1
===============================================================================
Description : (Not Specified)
IOM Host Port : 1/1/2
Software Version : TiMOS-M-0.0.I6015 esav-aa/esavm Nokia 7xxx ESAV Copyright
(c) 2000-2019 Nokia.
All rights reserved. All use subject to applicable
license agreements.
Built on Mon Aug 26 18:04:52 PDT 2019 by builder in /
builds/c/00/I6015/panos/main
Time of last boot : 2019/08/27 15:40:54 UTC
Oper flags : none
===============================================================================
*A:Dut-B# show esa-vm 6/2
===============================================================================
ESA VM VM Type Cores Memory Admin Oper
(GB) State State
-------------------------------------------------------------------------------
6 2 tunnel 4 6 up up
===============================================================================
===============================================================================
ESA/VM 6/2
===============================================================================
Description : (Not Specified)
IOM Host Port : 1/1/2
Software Version : TiMOS-M-0.0.I6015 esav-tunnel/esavm Nokia 7xxx ESAV
Copyright (c) 2000-2019 Nokia.
All rights reserved. All use subject to applicable
license agreements.
Built on Mon Aug 26 18:04:52 PDT 2019 by builder in /
builds/c/00/I6015/panos/main
Time of last boot : 2019/08/27 15:40:51 UTC
Oper flags : none
===============================================================================
*A:Dut-B# show esa-vm 6/3
===============================================================================
ESA VM VM Type Cores Memory Admin Oper
(GB) State State
-------------------------------------------------------------------------------
6 3 bb 4 16 up up
===============================================================================
===============================================================================
ESA/VM 6/3
===============================================================================
Description : (Not Specified)
IOM Host Port : 1/1/2
Software Version : TiMOS-M-0.0.I6015 esav-bb/esavm Nokia 7xxx ESAV Copyright
(c) 2000-2019 Nokia.
All rights reserved. All use subject to applicable
license agreements.
Built on Mon Aug 26 18:04:52 PDT 2019 by builder in /
builds/c/00/I6015/panos/main
Time of last boot : 2019/08/27 15:41:00 UTC
Oper flags : none
===============================================================================
|
Label |
Description |
|---|---|
|
ESA |
The ESA identification number |
|
VM |
The VM identification number |
|
VM Type |
The VM type (aa, bb, or tunnel) |
|
Cores |
The number of cores of the ESA-VM |
|
Memory (GB) |
The memory on the ESA-VM |
|
Admin State |
up — Administratively up |
|
down — Administratively down |
|
|
Operational State |
up — Operationally up |
|
down — Operationally down |
|
|
booting |
|
|
failed |
|
|
provisioned |
|
|
unprovisioned |
|
|
IOM Host Port |
The IOM host port in slot/mda/port format |
|
Oper flags |
The operational flags for the ESA-VM |
|
Virtual Core Role |
The virtual core role (Mgmt-#, Worker-#, Idle-#, Scheduler-#, Nic-#) |
|
Virtual Core Id |
The Virtual Core identification number |
|
Current % |
The current processing load of the virtual core |
|
15min Average % |
The 15 minute average processing load of the virtual core |
|
All-time Peak % |
The all-time peak processing load of the virtual core |
esa-vm
Syntax
esa-vm [esa-id/vm-id]
Context
[Tree] (clear esa-vm)
Full Context
clear esa-vm
Description
This command clears the statistics or status pertaining to the specified ESA-VM.
Parameters
- esa-id
-
Specifies the ESA.
- vm-id
-
Specifies the VM.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s
est-profile
est-profile
Syntax
est-profile [name]
Context
[Tree] (show certificate est-profile)
Full Context
show certificate est-profile
Description
This command displays EST profile information. If a profile name is not specified, the command displays information about all the EST profiles.
Parameters
- name
-
Specifies an existing EST profile name, up to 32 characters.
Platforms
All
Output
The following output is an example of the show certificate est-profile command
Output Example*A:cses-V27# show certificate est-profile
===============================================================================
EST Profile Server
Address:Port
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No. of EST Profiles: 0
===============================================================================
eth
eth
Syntax
eth
Context
[Tree] (tools>perform>service>id>loopback eth)
Full Context
tools perform service id loopback eth
Description
Commands in this context configure a loopback on Ethernet SAPs or MPLS SDP bindings.
Platforms
All
eth-cfm
eth-cfm
Syntax
eth-cfm
Context
[Tree] (show eth-cfm)
Full Context
show eth-cfm
Description
Commands in this context display eth-cfm information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
eth-cfm
Syntax
eth-cfm
Context
[Tree] (clear eth-cfm)
Full Context
clear eth-cfm
Description
Commands in this context display CFM information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
eth-cfm
Syntax
eth-cfm
Context
[Tree] (tools>dump eth-cfm)
Full Context
tools dump eth-cfm
Description
Commands in this context configure debugging for Ethernet Connectivity Fault Management.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
eth-cfm
Syntax
eth-cfm
Context
[Tree] (monitor eth-cfm)
Full Context
monitor eth-cfm
Description
Commands in this context monitor statistics for Ethernet connectivity fault management.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
eth-cfm
Syntax
eth-cfm
Context
[Tree] (show>service>sdp-using eth-cfm)
Full Context
show service sdp-using eth-cfm
Description
Commands in this context display SDP binding information for a specific ETH-CFM.
Platforms
All
eth-cfm
Syntax
eth-cfm [tunnel tunnel-id] [detail]
Context
[Tree] (show>lag eth-cfm)
Full Context
show lag eth-cfm
Description
This command displays ETH-CFM information.
Parameters
- tunnel-id
-
Filters ETH-CFM MEP information to one tunnel.
- detail
-
Displays detailed information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
eth-cfm
Syntax
eth-cfm [detail]
Context
[Tree] (show>port>ethernet eth-cfm)
Full Context
show port ethernet eth-cfm
Description
This command displays ETH-CFM information.
Parameters
- detail
-
Displays detailed information.
Platforms
All
eth-cfm-monitoring
eth-cfm-monitoring
Syntax
eth-cfm-monitoring [{service-id service-id sap-id sap-id} | {service-id service-id sdp-id sdp-id:vc-id}]
Context
[Tree] (show>system>security>cpu-protection eth-cfm-monitoring)
Full Context
show system security cpu-protection eth-cfm-monitoring
Description
This command displays sources exceeding their eth-cfm-monitoring rate limit.
Parameters
- service-id
-
Specifies the service ID.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS
eth-cfm-monitoring
Syntax
eth-cfm-monitoring
Context
[Tree] (clear>cpu-protection eth-cfm-monitoring)
Full Context
clear cpu-protection eth-cfm-monitoring
Description
This command clears records of flows exceeding the ETH-CFM monitoring rate limit.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS
eth-ring
eth-ring
Syntax
eth-ring
Context
[Tree] (tools>perform eth-ring)
Full Context
tools perform eth-ring
Description
This command performs Ethernet ring operations.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
eth-ring
Syntax
eth-ring [status]
eth-ring [ring-index] hierarchy
eth-ring ring-index [path {a | b}]
Context
[Tree] (show eth-ring)
Full Context
show eth-ring
Description
This command displays Ethernet Ring information.
Parameters
- status
-
Specifies to display an Ethernet Ring status summary
- ring-index
-
Specifies an Ethernet Ring index
- hierarchy
-
Specifies to display Ethernet Ring hierarchical relationships
- path
-
Specifies to show information for a specific path
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
eth-ring
Syntax
eth-ring ring-index [ clear]
Context
[Tree] (tools>dump eth-ring)
Full Context
tools dump eth-ring
Description
This command displays Ethernet Ring information.
Parameters
- ring-index
-
Specifies an Ethernet Ring index.
- clear
-
Keyword to clear stored information for the specified Ethernet Ring.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
eth-sat
eth-sat
Syntax
eth-sat [sat-id]
Context
[Tree] (show>system>satellite eth-sat)
Full Context
show system satellite eth-sat
Description
This command displays information about configured Ethernet satellites. If a sat-id is specified, this command displays information only about the specified Ethernet satellite.
Parameters
- sat-id
-
Specifies the Ethernet satellite chassis.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of Ethernet satellite information.
Output ExampleA:Dut-A# show system satellite eth-sat 1
===============================================================================
Satellite Information
===============================================================================
SatID Provisioned Type Admin Oper
Equipped Type (if different) State State
-------------------------------------------------------------------------------
esat-1 es48-1gb-sfp up up
Description : (Not Specified)
MAC Address : e4:81:84:24:2e:e5
Software Repository : rep1
SyncE : Disabled
Client-Down-Delay : Disabled | 5-1800sec
Hardware Data
Platform type : N/A
Part number : 82-0825-01
CLEI code :
Serial number : 01154100020
Manufacture date :
Manufacturing deviations : (Not Specified)
Manufacturing assembly number :
Administrative state : up
Operational state : up
Temperature : 51C
Temperature threshold : 85C
Software boot (rom) version : X-9.0.S222 on Thu Feb 16 03:29:00 IST 20xx
by builder
Software version : TiMOS-B-8.0.R9 both/hops Nokia SAS-Sx
46F2C4SFP+ 7210 Copyright (c) 2000-2020
Nokia.
All rights reserved. All use subject to
applicable license agreements.
Built on Mon Oct 31 10:10:30 IST 2020 by
builder in /home/builder/8.0B1/R9/panos/
main
Time of last boot : 2020/02/28 13:02:41
Current alarm state : alarm cleared
Base MAC address : e4:81:84:24:2e:e5
===============================================================================
*A:Dut-A>config>system>sat>eth-sat# /show system satellite eth-sat 1
===============================================================================
Satellite Information
===============================================================================
SatID Provisioned Type Admin Oper
Equipped Type (if different) State State
-------------------------------------------------------------------------------
esat-1 es48-1gb-sfp up up
Description : (Not Specified)
MAC Address : 8c:f7:73:cc:ca:61
Software Repository : rep1
SyncE : Disabled
PTP-TC : Disabled
Client-Down-Delay : Disabled
Console Access : Enabled
Port-Template : (Not Specified)
eth-sat
Syntax
eth-sat sat-id
Context
[Tree] (clear>system>satellite eth-sat)
Full Context
clear system satellite eth-sat
Description
Commands in this context clear Ethernet satellite information.
Parameters
- sat-id
-
Specifies the Ethernet satellite ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
eth-seg
eth-seg
Syntax
eth-seg [hunt | detail] [rd rd] [community comm-id] [originator-ip ip-address | ipv6-address] [next-hop next-hop] [esi esi] [aspath-regex reg-exp]
Context
[Tree] (show>router>bgp>routes>evpn eth-seg)
Full Context
show router bgp routes evpn eth-seg
Description
This command displays BGP-EVPN Ethernet Segment (ES) routes.
Parameters
- hunt
-
Displays entries for the specified route.
- detail
-
Displays detailed information.
- rd
-
Displays information for the route distinguisher.
- comm-id
-
Specifies community ID, up to 72 characters.
- ip-address | ipv6-address
-
Specifies the IPv4 or IPv6 originator address, up to 64 characters.
- next-hop
-
Specifies the IPv4 or IPv6 BGP next-hop address.
- esi
-
Specifies a 10-byte ESI by which to filter the displayed information. For example,ESI-0 | ESI-MAX or 00-11-22-33-44-55-66-77-88-99 with any of these separators('-',':',' ')
- reg-exp
-
Displays routes matching the specified regular expression, up to 80 characters.
Platforms
All
eth-tunnel
eth-tunnel
Syntax
eth-tunnel [group tunnel-group-name] [ vc-id vc-id]]
Context
[Tree] (show>router>l2tp eth-tunnel)
Full Context
show router l2tp eth-tunnel
Description
This command displays information about configured L2TPv3 Ethernet tunnels. These Ethernet tunnels are the L2TPv3 sessions setup between the local private L2 SAP and the far end device.
If this command is executed without any parameters, then a list of all configured Ethernet tunnels are displayed.
If this command is executed with a tunnel group name or a VC-ID, then a detailed view of the associated Ethernet tunnel is displayed.
Parameters
- tunnel-group-name
-
Specifies the configured tunnel group name used for the associated Ethernet tunnel.
- vc-id
-
Specifies the VC ID for the L2TPv3 Ethernet tunnel.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of L2TPv3 Ethernet tunnel information
Output ExampleA:Dut-A# show router 200 l2tp eth-tunnel
===============================================================================
L2TPv3 Ethernet Tunnel Summary
===============================================================================
Tunnel Group name VC ID
-------------------------------------------------------------------------------
v3-group-1 100
-------------------------------------------------------------------------------
No. of ethernet tunnels: 1
===============================================================================
A:Dut-A# show router 200 l2tp eth-tunnel group "v3-group-1"
===============================================================================
L2TPv3 Ethernet Tunnel Status
===============================================================================
Group Name : v3-group-1
VC ID : 100
Local Conn ID : 221122308
Ctrl Conn ID : 221118464
Matches Cfg : true
Down Reason : N/A
Reconnect Time (s) : N/A
Remaining Time (s) : N/A
SAP ID : tunnel-1.private:100
SAP Service ID : 100
-------------------------------------------------------------------------------
No. of ethernet tunnels: 1
===============================================================================
eth-tunnel
Syntax
eth-tunnel
eth-tunnel {aps | status}
eth-tunnel tunnel-index [path path-index] [detail]
Context
[Tree] (show eth-tunnel)
Full Context
show eth-tunnel
Description
This command displays Ethernet tunnel information. Any data SAP missing a tag for a defined path has the EthTunTagMismatch flag generated. In the example provided below, SAP eth-tunnel-1:1 does not have the tag for path 2 configured. Therefore, it is operationally down with the reason indicated by the EthTunTagMismatch flag.
Parameters
- aps
-
Shows APS Ethernet tunnel information.
- status
-
Shows Ethernet tunnel status information.
- tunnel-index
-
Specifies the tunnel index.
- path-index
-
Specifies the path index.
- detail
-
Displays detailed information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of Ethernet tunnel information, and Output Fields: show eth-tunnel describes the output fields.
Output Example: show eth-tunnel*A:PE-E# show eth-tunnel
===============================================================================
Ethernet Tunnel Groups
===============================================================================
Tunnel Admin Oper Protection Active Paths
ID State State Type 1 2 3 4 5 6 7 8
-------------------------------------------------------------------------------
1 Up Up g.8031-1to1 x 2
2 Up Up g.8031-1to1 1 x
===============================================================================
*A:PE-E#
*A:PE-E# show eth-tunnel aps
===============================================================================
Ethernet Tunnel APS Groups
===============================================================================
Tunnel Admin Oper Working Path Path Active Rx PDU
ID State State Protecting Path State Path Tx PDU
-------------------------------------------------------------------------------
1 Up Up 1 - 1/1/2 1 Down No BF010100 ( SF)
2 - 2/1/2 1 Up Yes BF010100 ( SF)
2 Up Up 1 - 2/1/2 2 Up Yes 0F000000 ( NR)
2 - 1/1/2 2 Down No EF000000 (SF-P)
===============================================================================
*A:PE-E#
*A:PE-E# show eth-tunnel 1
===============================================================================
Ethernet Tunnel Group 1 Information
===============================================================================
Description : Eth Tunnel
IfIndex : 1476395009
Admin State : Up Oper State : Up
Protection Type : G.8031-1to1 Max Revert Time : 1 seconds
MAC Address : 00:1a:f0:44:d2:03 Time to Revert : N/A
Hold Down Time : 0 centiseconds
-------------------------------------------------------------------------------
Ethernet Tunnel Group APS Information
-------------------------------------------------------------------------------
APS PDU Rx : BF010100 ( SF) Switchover Time : 05/28/2009 10:10:17
APS PDU Tx : BF010100 ( SF)
Defect Status :
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Ethernet Tunnel Group Path Summary
-------------------------------------------------------------------------------
Path ID Member Control-Tag Precedence Admin/Oper Active Mgmt
-------------------------------------------------------------------------------
1 1/1/2 1 primary Up/Down No Yes
2 2/1/2 1 secondary Up/Up Yes No
===============================================================================
*A:PE-E#
*A:PE-E# show eth-tunnel 1 path 1
===============================================================================
Ethernet Tunnel Group 1 Path Information
===============================================================================
Description : (Not Specified)
Member : 1/1/2 Control-Tag : 1
Admin State : Up Oper State : Down
-------------------------------------------------------------------------------
Ethernet Tunnel Group Path APS Information
-------------------------------------------------------------------------------
Active Count : 2 Active Time : 0d 00:12:09
-------------------------------------------------------------------------------
Eth-Cfm Configuration Information
-------------------------------------------------------------------------------
Md-index : 1 Direction : Down
Ma-index : 1 Admin : Enabled
MepId : 1 CCM-Enable : Enabled
LowestDefectPri : macRemErrXcon HighestDefect : defRemoteCCM
Defect Flags : bDefRemoteCCM
Mac Address : 00:16:4d:c0:c1:ca ControlMep : True
===============================================================================
*A:PE-E#
*A:PE-E# show eth-tunnel 1 path 1 detail
===============================================================================
Ethernet Tunnel Group 1 Detailed Path Information
===============================================================================
Description : (Not Specified)
Member : 1/1/2 Control-Tag : 1
Admin State : Up Oper State : Down
-------------------------------------------------------------------------------
Ethernet Tunnel Group Path APS Information
-------------------------------------------------------------------------------
Active Count : 2 Active Time : 0d 00:12:09
-------------------------------------------------------------------------------
Eth-Cfm Configuration Information
-------------------------------------------------------------------------------
Md-index : 1 Direction : Down
Ma-index : 1 Admin : Enabled
MepId : 1 CCM-Enable : Enabled
LowestDefectPri : macRemErrXcon HighestDefect : defRemoteCCM
Defect Flags : bDefRemoteCCM
Mac Address : 00:16:4d:c0:c1:ca ControlMep : True
CcmLtmPriority : 7
CcmTx : 0 CcmSequenceErr : 0
Eth-Ais: : Disabled
Eth-Tst: : Disabled
LbRxReply : 0 LbRxBadOrder : 0
LbRxBadMsdu : 0 LbTxReply : 0
LbNextSequence : 1 LtNextSequence : 1
LtRxUnexplained : 0
===============================================================================
*A:PE-E#
|
Field |
Description |
|---|---|
|
Tunnel Id |
Numeric value from 1 to 64. |
|
Admin State |
Up — The eth tunnel is administratively up. Down — The eth tunnel is administratively down. |
|
Oper State |
Up — The eth tunnel is operationally up. Down — The eth tunnel is operationally down. |
|
Protection Type |
Two options: g8031-1to1 — Two members are allowed, but only one of them is active at one point in time. loadsharing — Multiple members can be active at one point in time. |
|
Active Paths |
Only two paths are supported. |
eth-tunnel
Syntax
eth-tunnel tunnel-index [clear]
Context
[Tree] (tools>dump eth-tunnel)
Full Context
tools dump eth-tunnel
Description
This command displays Ethernet tunnel information.
Parameters
- tunnel-id
-
Specifies the tunnel ID.
- clear
-
Clears statistics after reading.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of Ethernet tunnel information.
Output Example*A:PE-E# tools dump eth-tunnel 1
TunnelId 1 (Up/Up), Port eth-tunnel-1 (Up/Up): type g8031-1to1
NumMems 2/2, Up/Dn 0/0, active 0x1, present 0x3 baseMemPort 1/1/2
memId 1 (P), port 1/1/2 (Up), tag 1.0(Up) status (Up/Up)
ccCnt-sf/ok 1/1 idx 0 tunId 1
memId 2 (S), port 2/1/2 (Up), tag 1.0(Up) status (Up/Up)
ccCnt-sf/ok 0/0 idx 1 tunId 1
TunId = 1, state = Running, Active = Work, Now = 000 00:16:48.140
revert = 1, ReqState = NR-NULL, Pdu(Tx/Rx): 0x0f0000/0x0f0000
Defects =
Running Timers = PduReTx
Work MemId = 1 (1/1/2:1.0), state = Ok, cc = 000 00:16:23.510U
ActiveCnt = 4, ActiveSeconds = 791
Protect MemId = 2 (2/1/2:1.0), state = Ok, cc = 000 00:09:47.560U
ActiveCnt = 3, ActiveSeconds = 308
DbgCnts: swoEv = 2, wMemSts = 2, pMemSts = 0
rxPdu (valid/Invalid) = 4/0, wSfClr = 1, pSfClr = 0, wtrExp = 1
cm = 0, cmClr = 0, pm = 0, pmClr = 0, nr = 0, nrClr = 0
Seq Event TxPdu RxPdu Dir Act Time
=== ======== ============ ============ ===== ==== ================
000 wMemSts 0xbf0101 wSF 0x0f0000 NR Tx--> Prot 000 00:16:12.450
001 RxPdu 0xbf0101 wSF 0x0f0101 NR Rx<-- Prot 000 00:16:12.450
002 RxPdu 0xbf0101 wSF 0xbf0101 wSF Rx<-- Prot 000 00:16:12.480
003 RxPdu 0xbf0101 wSF 0x0f0101 NR Rx<-- Prot 000 00:16:24.890
004 wSFClr 0x5f0101 WTR 0x0f0101 NR Tx--> Prot 000 00:16:25.030
005 WTR 0x0f0000 NR 0x0f0101 NR Tx--> Work 000 00:16:26.630
006 RxPdu 0x0f0000 NR 0x0f0000 NR Rx<-- Work 000 00:16:26.630
*A:PE-E#
ethernet
ethernet
Syntax
ethernet
Context
[Tree] (clear>port ethernet)
Full Context
clear port ethernet
Description
Commands in this context clear Ethernet port statistics.
Platforms
All
ethernet
Syntax
ethernet
Context
[Tree] (show>system ethernet)
Full Context
show system ethernet
Description
Commands in this context display system-specific Ethernet information.
Platforms
All
ethernet
Syntax
ethernet
ethernet associations
ethernet [detail]
Context
[Tree] (show>port ethernet)
Full Context
show port ethernet
Description
Commands in this context display Ethernet port information.
Parameters
- associations
-
Displays Ethernet port associations.
- detail
-
Displays detailed information.
Platforms
All
ethernet-segment
ethernet-segment
Syntax
ethernet-segment
ethernet-segment name name [all]
ethernet-segment name name evi [evi]
ethernet-segment name name isid [isid]
ethernet-segment name name virtual-ranges
Context
[Tree] (show>service>system>bgp-evpn ethernet-segment)
Full Context
show service system bgp-evpn ethernet-segment
Description
Commands in this context display the Ethernet Segment (ES) parameters.
Parameters
- name
-
Specifies the name of an ES, up to 32 characters.
- all
-
Displays all available information for the specified ES.
- evi
-
Displays information for the specified EVPN Instance (EVI) .
- isid
-
Displays information for the specified ISID.
- virtual-ranges
-
Displays the VD-ID, Q-tag, S-tag, or C-tag per S-tag virtual ranges configured on the virtual ES.
Platforms
All
Output
See the following output examples:
-
Output Example: show service system BGP EVPN ES information for manually configured ESI
-
Output Example: show service system BGP EVPN ES information for unconfigured auto-ESI and ESI
show service system bgp-evpn ethernet-segment name "ES-1"
===============================================================================
Service Ethernet Segment
===============================================================================
Name : ES-1
Eth Seg Type : None
Admin State : Enabled Oper State : Up
ESI : auto-esi
Oper ESI : 01:d8:47:ff:00:00:00:00:01:00
Auto-ESI Type : Type 1
AC DF Capability : Exclude
Multi-homing : singleActive Oper Multi-homing : singleActive
ES SHG Label : 524285
Source BMAC LSB : None
Vprn Next Hop : 1.1.1.1
Lag Id : 1
ES Activation Timer : 0 secs
Oper Group : es-1
Svc Carving : manual Oper Svc Carving : manual
Cfg Range Type : lowest-pref
-------------------------------------------------------------------------------
DF Pref Election Information
-------------------------------------------------------------------------------
Preference Preference Last Admin Change Oper Pref Do No
Mode Value Value Preempt
-------------------------------------------------------------------------------
non-revertive 32767 04/12/2021 08:08:54 32767 Enabled
-------------------------------------------------------------------------------
EVI Ranges: <none>
ISID Ranges: <none>
===============================================================================
show service system bgp-evpn ethernet-segment name "ES-1" ============================================================
Service Ethernet Segment
============================================================
Name : ES-1
Eth Seg Type : None
Admin State : Enabled Oper State : Up
ESI : auto-esi
Oper ESI : 01:00:ca:fe:ca:fe:00:01:01:00
Auto-ESI Type : Type 1
AC DF Capability: Exclude
Multi-homing : allActive Oper Multi-homing : allActive
show service system bgp-evpn ethernet-segment name "ES-1"
============================================================
Service Ethernet Segment
============================================================
Name : ES-1
Eth Seg Type : None
Admin State : Enabled Oper State : Up
ESI : auto-esi
Oper ESI : None
Auto-ESI Type : Type 1
AC DF Capability: Exclude
Multi-homing : allActive Oper Multi-homing : allActive
show service system bgp-evpn ethernet-segment name "ES-1"============================================================
Service Ethernet Segment
============================================================
Name : ES-1
Eth Seg Type : None
Admin State : Enabled Oper State : Up
ESI : 01:00:ca:fe:ca:fe:00:01:01:00
Oper ESI : 01:00:ca:fe:ca:fe:00:01:01:00
Auto-ESI Type : None
AC DF Capability: Exclude
Multi-homing : allActive Oper Multi-homing : allActive
show service system bgp-evpn ethernet-segment name "ES23" all
===============================================================================
Service Ethernet Segment
===============================================================================
Name : ES23
Eth Seg Type : None
Admin State : Enabled Oper State : Up
ESI : 00:ca:ca:de:ba:ca:00:ee:ca:ca
Oper ESI : 00:ca:ca:de:ba:ca:00:ee:ca:ca
Auto-ESI Type : None
AC DF Capability : Include
Multi-homing : singleActive Oper Multi-homing : singleActive
ES SHG Label : 524249
Source BMAC LSB : None
Vprn Next Hop : 1.1.1.1
PW Port Id : 20
PW Port Headend : enabled
ES Activation Timer : 0 secs
Oper Group : (Not Specified)
Svc Carving : manual Oper Svc Carving : manual
Cfg Range Type : lowest-pref
-------------------------------------------------------------------------------
DF Pref Election Information
-------------------------------------------------------------------------------
Preference Preference Last Admin Change Oper Pref Do No
Mode Value Value Preempt
-------------------------------------------------------------------------------
non-revertive 20 01/17/2022 18:39:59 20 Enabled
-------------------------------------------------------------------------------
EVI Ranges: <none>
ISID Ranges: <none>
===============================================================================
-------------------------------------------------------------------------------
Vprn NextHop Evi Ranges
-------------------------------------------------------------------------------
From To Last Update
-------------------------------------------------------------------------------
12345 12345 09/05/2022 19:01:28
-------------------------------------------------------------------------------
===============================================================================
EVI Information
===============================================================================
EVI SvcId Actv Timer Rem DF
-------------------------------------------------------------------------------
20211 20211 0 no
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
-------------------------------------------------------------------------------
DF Candidate list
-------------------------------------------------------------------------------
EVI DF Address
-------------------------------------------------------------------------------
20211 2001:db8::2
20211 2001:db8::3
-------------------------------------------------------------------------------
Number of entries: 2
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
show service system bgp-evpn ethernet-segment name "ES-1"============================================================
Service Ethernet Segment
============================================================
Name : ES-1
Eth Seg Type : None
Admin State : Enabled Oper State : Up
ESI : None
Oper ESI : None
Auto-ESI Type : None
AC DF Capability: Exclude
Multi-homing : allActive Oper Multi-homing : allActive
BGP EVPN ES Field Descriptions describes BGP EVPN ES output fields.
|
Field |
Description |
|---|---|
|
Name |
The Ethernet Segment name |
|
Eth Seg Type |
The Ethernet Segment type |
|
Admin State |
The administrative state for this service Ethernet Segment |
|
Oper State |
The operational state for this service Ethernet Segment |
|
ESI |
The Ethernet Segment Identifier |
|
Oper ESI |
The current operational Ethernet Segment Identifier |
|
Auto-ESI Type |
The auto-derived Ethernet Segment Identifier type |
|
AC DF Capability |
The AC-DF Capability status (Exclude or Include) |
|
Multi-homing |
The multi-homing information |
|
Oper Multi-homing |
The operational multi-homing state |
|
ES SHG Label |
The ES Split Horizon Group label |
|
Source BMAC LSB |
The source BMac least significant bit |
|
Vprn Next Hop |
The IP address associated with an Ethernet Segment |
|
PW Port Id |
The PW port ID |
|
PW Port Headend |
The PW port headend status |
|
ES BMac Tbl Size |
The ES BMac table size |
|
ES BMac Entries |
The ES BMac entries |
|
Lag Id |
The LAG ID |
|
ES Activation Timer |
The ES activation timer |
|
Svc Carving |
The service carving type |
|
Oper Svc Carving |
The operational service carving type |
|
Cfg Range Type |
The configured range type |
|
DF Pref Election Information |
|
|
Preference Mode |
The preference mode |
|
Preference Value |
The preference value |
|
Last Admin Change |
The date and time of the last administrative change |
|
Oper Pref Value |
The operational preference value |
|
Do No Preempt |
The Do Not Preempt status |
|
EVI Ranges |
The EVI ranges |
|
ISID Ranges |
The ISID ranges |
|
Vprn NextHop Evi Ranges |
|
|
From |
The beginning point of the EVI range |
|
To |
The ending point of the EVI range |
|
Last Update |
The date and time of the last range update |
|
EVI Information |
|
|
EVI |
The EVPN instance |
|
SvcId |
The service ID |
|
Actv Timer Rem |
The active timer rem value |
|
DF |
The designated forwarder status |
|
Number of entries: |
The number of entries |
|
EVI DF and Candidate List |
|
|
DF Last Change |
The date and time of the last DF candidate change |
|
DF Candidates |
The DF candidate IP address |
|
Time Added |
The date and time of the DF candidate addition |
|
Q-Tag Ranges |
|
|
Q-Tag Start |
The Q-Tag start range value |
|
Q-Tag End |
The Q-Tag end range value |
|
Last Changed |
The date and time of the last change |
|
VC-Id Ranges |
|
|
VC-Id Start |
The VC-Id start range value |
|
VC-Id End |
The VC-Id end range value |
|
S-Tag Ranges |
|
|
S-Tag Start |
The S-Tag start value |
|
S-Tag End |
The S-Tag end value |
|
S-Tag C-Tag Ranges |
|
|
C-Tag Start |
The C-Tag start value |
|
C-Tag End |
The C-Tag end value |
|
Vxlan Instance Service Ranges |
|
|
Svc Range Start |
The service range start in this Vxlan instance |
|
Svc Range End |
The service range end in this Vxlan instance |
ethernet-segment
Syntax
ethernet-segment name evi evi df
ethernet-segment name isid isid df
ethernet-segment name local-bias
Context
[Tree] (tools>dump>service>system>bgp-evpn ethernet-segment)
Full Context
tools dump service system bgp-evpn ethernet-segment
Description
This command shows the computed DF PE for a specified EVI or ISID when the evi or isid parameters are selected, respectively. When the local-bias parameter is used, the output lists the PEs that are in the candidate DF Election list for the ES, and whether local bias procedures are enabled on them.
The PE can only enable local bias procedures on up to three PEs that are attached to the same ES and use multihomed VXLAN services. If more than three PEs exists, the PEs are ordered by either lowest IP (if service-carving auto is used in the ES) or lowest preference (if preference-based service-carving is used) and only the top three PEs are considered for local bias.
Parameters
- name
-
Specifies the name of the Ethernet Segment, up to 32 characters.
- evi
-
Specifies the EVI.
- isid
-
Specifies the ISID.
- local-bias
-
Specifies that output lists the PEs that are in the candidate DF Election list for the ES, and whether local bias procedures are enabled on them.
Platforms
All
Output
The following output is an example of Ethernet Segment information.
Output Example# tools dump service system bgp-evpn ethernet-segment "ESI-71" evi 1 df
[07/15/2015 21:52:08] Computed DF: 192.0.2.72 (Remote) (Boot Timer Expired: Yes)
# tools dump service system bgp-evpn ethernet-segment "ESI-71" isid 20001 df
[07/15/2015 21:52:21] Computed DF: 192.0.2.72 (Remote) (Boot Timer Expired: Yes)
# /tools dump service system bgp-evpn ethernet-segment "ESI-71" local-bias
-------------------------------------------------------------------------------
[02/05/2019 20:54:20] Vxlan Local Bias Information
----------------------------------------------------------------------+--------
Peer | Enabled
----------------------------------------------------------------------+--------
220.0.0.1 | Yes
220.0.0.2 | Yes
220.0.0.3 | Yes
220.0.0.4 | No
----------------------------------------------------------------------+--------
# tools dump service system bgp-evpn ethernet-segment "eslag1" local-bias
-------------------------------------------------------------------------------
[04/22/2018 15:40:22] Vxlan Local Bias Information
----------------------------------------------------------------------+--------
Peer | Enabled
----------------------------------------------------------------------+--------
10.20.1.1 | Yes
10.20.1.2 | Yes
10.20.1.4 | Yes
10.20.1.5 | No
-------------------------------------------------------------------------------
# tools dump service system bgp-evpn ethernet-segment "ES23" evi 20211 df
[01/17/2022 17:00:39] Computed DF: 2001:db8::3 (Remote) (Boot Timer Expired: Yes)
[01/17/2022 17:00:39] Computed Backup: 2001:db8::2 (This Node)
# tools dump service system bgp-evpn ethernet-segment "ES23" evi 20212 df
[01/17/2022 17:00:46] Evi not active on ethernet-segment
ethernet-segment
Syntax
ethernet-segment [name]
Context
[Tree] (show>service>sdp-using ethernet-segment)
Full Context
show service sdp-using ethernet-segment
Description
This command displays Ethernet Segment information associated with SDPs.
Parameters
- name
-
Specifies the Ethernet segment name, up to 32 characters.
Platforms
All
etree
etree
Syntax
etree
Context
[Tree] (show>service>id etree)
Full Context
show service id etree
Description
This command displays the same information shown in the show service ID base context, with the addition of the role of each object in the VPLS E-Tree service.
The following labels identify the configuration of the SAPs and SDP bindings:
-
(L) indicates leaf-ac
-
(RL) indicates root-leaf-tag
Platforms
All
Output
The following output is an example of VPLS E-Tree information.
Output Example*A:PE-6# show service id 2005 etree
===============================================================================
Service Basic Information
===============================================================================
Service Id : 2005 Vpn Id : 0
Service Type : VPLS
Name : etree-2005
Description : (Not Specified)
Customer Id : 1 Creation Origin : manual
Last Status Change: 05/08/2018 09:49:54
Last Mgmt Change : 05/08/2018 09:51:09
Etree Mode : Enabled
Admin State : Up Oper State : Up
MTU : 1514
SAP Count : 2 SDP Bind Count : 1
Snd Flush on Fail : Disabled Host Conn Verify : Disabled
SHCV pol IPv4 : None
Propagate MacFlush: Disabled Per Svc Hashing : Disabled
Allow IP Intf Bind: Disabled
Fwd-IPv4-Mcast-To*: Disabled Fwd-IPv6-Mcast-To*: Disabled
Mcast IPv6 scope : mac-based
Def. Gateway IP : None
Def. Gateway MAC : None
Temp Flood Time : Disabled Temp Flood : Inactive
Temp Flood Chg Cnt: 0
SPI load-balance : Disabled
TEID load-balance : Disabled
Src Tep IP : N/A
Vxlan ECMP : Disabled
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:1/1/c1/1:2005 (L) q-tag 9000 9000 Up Up
sap:1/1/c1/1:2006 (RL) q-tag 9000 9000 Up Up
sdp:65:2005 (RL) S(192.0.2.5) Spok 0 8974 Up Down
-------------------------------------------------------------------------------
Legend: (L): Leaf-Ac, (RL): Root-Leaf-Tag
===============================================================================
* indicates that the corresponding row element may have been truncated.
eval-group-interface-template
eval-group-interface-template
Syntax
eval-group-interface-template name
Context
[Tree] (tools>perform>subscr-mgmt eval-group-interface-template)
Full Context
tools perform subscriber-mgmt eval-group-interface-template
Description
This command reapplies the specified group-interface template to all the group interfaces that were created using this template. This command can be used after changing the group-interface template, because not all the changed parameters are automatically applied to the existing group interfaces.
This command reports the total number of group interfaces linked to the template, the number of group interfaces that were changed or did not require a change, and the number of group interfaces for which a change was attempted but failed.
Parameters
- name
-
Specifies a group-interface template name, up to 32 characters, as configured under configure subscriber-mgmt group-interface-template.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of the command information.
Output ExampleA:BNG-UPF# /tools perform subscriber-mgmt eval-group-interface-template "default"
Group interface instances:
- total submitted : 1
- changed : 1
- change failed : 0
eval-ipoe-session
eval-ipoe-session
Syntax
eval-ipoe-session [svc-id service-id] [sap sap-id] [mac mac-address] [circuit-id circuit-id] [remote-id remote-id] [subscriber sub-ident-string]
Context
[Tree] (tools>perform>subscr-mgmt eval-ipoe-session)
Full Context
tools perform subscriber-mgmt eval-ipoe-session
Description
This command re-evaluates the mapping between authentication strings such as the SLA profile string and the actual profiles for the identified IPoE sessions.
Parameters
- service-id
-
Specifies an existing subscriber service ID.
- sap-id
-
Specifies a SAP ID, up to 255 characters.
- mac-address
-
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.
- circuit-id
-
Specifies the circuit ID up to 127 characters.
- remote-id
-
Specifies that information that goes into the remote-id sub-option in the DHCP relay packet, up to 255 characters.
- sub-ident-string
-
Specifies an existing subscriber identification profile.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
eval-lease-state
eval-lease-state
Syntax
eval-lease-state [svc-id service-id] [sap sap-id] [subscriber sub-ident-string] [ip ip-address] [mac mac-address]
Context
[Tree] (tools>perform>subscr-mgmt eval-lease-state)
Full Context
tools perform subscriber-mgmt eval-lease-state
Description
This command evaluates lease state.
Parameters
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- ip-address
-
Specifies the server’s IP address. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
- sub-ident-string
-
Specifies the subscriber ID string, up to 32 characters.
- service-id
-
Specifies an existing service ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
eval-msap
eval-msap
Syntax
eval-msap {policy msap-policy-name | msap sap-id}
Context
[Tree] (tools>perform>subscr-mgmt eval-msap)
Full Context
tools perform subscriber-mgmt eval-msap
Description
This command re-applies the managed SAP policy to the managed SAP identified by the specified sap-id or to all managed SAPs associated with the specified msap-policy name.
Parameters
- msap-policy-name
-
Specifies an existing MSAP policy. The MSAP policy is re-applied to all associated managed SAPs.
- sap-id
-
Specifies an MSAP SAP ID. The MSAP policy is re-applied to the specified MSAP.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
eval-ppp-session
eval-ppp-session
Syntax
eval-ppp-session [svc-id service-id] [user-name user-name] [sap sap-id] [ip ip-address] [subscriber sub-ident-string]
eval-ppp-session [svc-id service-id] [user-name user-name] [sap sap-id] mac mac-address [session-id session-id] [ip ip-address] [subscriber sub-ident-string]
Context
[Tree] (tools>perform>subscr-mgmt eval-ppp-session)
Full Context
tools perform subscriber-mgmt eval-ppp-session
Description
This command evaluates PPP sessions.
Parameters
- service-id
-
Specifies an existing subscriber service ID.
- user-name
-
Specifies the PPP user name up to 253 characters.
- sap-id
-
Specifies a SAP ID up to 255 characters.
- ip-address
-
Specifies the peer’s IP address.
- sub-ident-string
-
Specifies an existing subscriber identification profile.
- mac-address
-
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.
- session-id
-
Specifies information about the ID of the PPP session.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
eval-rates
eval-rates
Syntax
eval-rates
Context
[Tree] (tools>perform>subscr-mgmt>bonding eval-rates)
Full Context
tools perform subscriber-mgmt bonding eval-rates
Description
This command evaluates all bonding contexts and recalculates all reference rates. This command can be useful in handling changes that are not automatically tracked, such as adapting a scheduler rate in a QoS policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
eval-sap-template
eval-sap-template
Syntax
eval-sap-template name
Context
[Tree] (tools>perform>subscr-mgmt eval-sap-template)
Full Context
tools perform subscriber-mgmt eval-sap-template
Description
This command reapplies the SAP template to all the SAPs that were created using this template. This command can be used after changing the SAP template because not all the changed parameters are automatically applied to the existing SAPs.
This command reports the total number of SAPs linked to the template, the number of SAPs that changed or did not require a change, and the number of SAPs for which a change was attempted but failed.
Parameters
- name
-
Specifies a SAP template name, up to 32 characters, as configured under configure subscriber-mgmt sap-template.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of the command information.
Output ExampleA:BNG-UPF# /tools perform subscriber-mgmt eval-sap-template "default"
Sap instances:
- total submitted : 1
- changed : 1
- change failed : 0
eval-slaac-host
eval-slaac-host
Syntax
eval-slaac-host [svc-id service-id] [sap sap-id] [subscriber sub-ident-string] [ipv6-address ipv6-prefix] [mac ieee-address]
Context
[Tree] (tools>perform>subscr-mgmt eval-slaac-host)
Full Context
tools perform subscriber-mgmt eval-slaac-host
Description
This command evaluates the SLAAC host.
Parameters
- service-id
-
Specifies an existing subscriber service ID.
- sap-id
-
Specifies a SAP ID, up to 255 characters.
- sub-ident-string
-
Specifies an existing subscriber identification profile.
- ieee-address
-
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.
- ipv6-prefix
-
Specifies an IPv6 prefix and prefix length.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
evaluate-script
evaluate-script
Syntax
evaluate-script sap sap-id control-session acct-session-id action script-action [ dynsvc-policy name] [param-string string]
Context
[Tree] (tools>perform>service>dynamic-services evaluate-script)
Full Context
tools perform service dynamic-services evaluate-script
Description
This tools command performs the execution of a dynamic service script action as if the corresponding RADIUS attributes were received from RADIUS. It is possible to setup, modify or teardown a dynamic service associated with the specified control channel.
This command is not available in the MD-CLI.
Parameters
- sap sap-id
-
specifies the dynamic service SAP id.
- control-session acct-session-id
-
Specifies the accounting session id of the control channel associated with this dynamic service.
- action script-action
-
Specifies the requested action: setup, modify or teardown.
- dynsvc-policy name
-
Specifies the dynamic services policy to use for this action. Mandatory parameter for setup and modify actions. In case of a modify action, the dynamic services policy must be the same as the policy used at setup.
- param-string string
-
Specifies the dynamic service parameter list. Mandatory parameter for setup and modify actions.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
evc
evc
Syntax
evc [port-id [vlan vlan-id]]
Context
[Tree] (show>elmi evc)
Full Context
show elmi evc
Description
This command displays Ethernet Virtual Connections (EVC). No argument displays all the EVC on the service router. The port and VLAN arguments display information related to EVC associated with the port and VLAN.
Parameters
- port-id
-
Displays information related to the EVCs configured on the port.
- vlan-id
-
Specifies the VLAN Identifier of the EVC.
Platforms
All
Output
The following output is an example of E-LMI EVC information, and Output Fields: show elmi evc describes the output fields.
Output Example*A:Dut-C# show elmi evc
===============================================================================
ELMI EVC Table
===============================================================================
Port Vlan Status Type Evc Id
-------------------------------------------------------------------------------
1/1/1 10 New-Act P2p EVC11110
1/1/3 30 New-Act P2p EVC11220
1/1/5 100 Act P2p EVC115100
1/1/5 200 Act P2p EVC115200
-------------------------------------------------------------------------------
Number of Evcs : 4
===============================================================================
*A:Dut-C#
A:Dut-C# show elmi evc 1/1/5
===============================================================================
ELMI EVC Table
===============================================================================
Port Vlan Status Type Evc Id
-------------------------------------------------------------------------------
1/1/5 100 Act P2p EVC115100
1/1/5 200 Act P2p EVC115200
-------------------------------------------------------------------------------
Number of Evcs : 2
===============================================================================
A:Dut-C#
*A:Dut-C# show elmi evc 1/1/5 vlan 100
===============================================================================
Evc Detailed Information
===============================================================================
Port : 1/1/5 vlanId : 100
Evc Status : Act Evc Type : P2p
Evc Identifier: EVC115100
===============================================================================
*A:Dut-C#
|
Field |
Description |
|---|---|
|
Port |
Port identifier. |
|
Vlan |
Vlan identifier. |
|
Status |
New-Act — New and active. Act — Active. |
|
Type |
Connection type. |
|
EVC Id |
EVC identifier. |
event-control
event-control
Syntax
event-control [application-id [event-name | event-number]]
event-control application-id event-name detail
Context
[Tree] (show>log event-control)
Full Context
show log event-control
Description
This command displays event control settings for events including whether the event is suppressed or generated and the severity level for the event.
If no options are specified all events, alarms and traps are listed.
Parameters
- application-id
-
Only displays event control for the specified application.
- event-name
-
Only displays event control for the named application event, up to 32 characters.
- event-number
-
Only displays event control for the specified application event number.
Platforms
All
Output
The following output is an example of event control information.
Event-Control Output Field Descriptions describes the output fields for the event control.
Output ExampleA:gal171# show log event-control
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
BGP:
2001 bgpEstablished MI gen 0 0
2002 bgpBackwardTransition WA gen 0 0
2003 tBgpMaxPrefix90 WA gen 0 0
2004 tBgpMaxPrefix100 CR gen 0 0
L 2005 sendNotification WA gen 0 0
L 2006 receiveNotification WA gen 0 0
L 2007 bgpInterfaceDown WA gen 0 0
L 2008 bgpConnNoKA WA gen 0 0
L 2009 bgpConnNoOpenRcvd WA gen 0 0
L 2010 bgpRejectConnBadLocAddr WA gen 0 0
L 2011 bgpRemoteEndClosedConn WA gen 0 0
L 2012 bgpPeerNotFound WA gen 0 0
L 2013 bgpConnMgrTerminated WA gen 0 0
L 2014 bgpTerminated WA gen 0 0
L 2015 bgpNoMemoryPeer CR gen 0 0
L 2016 bgpVariableRangeViolation WA gen 0 0
L 2017 bgpCfgViol WA gen 0 0
CFLOWD:
2001 cflowdCreated MI gen 0 0
2002 cflowdCreateFailure MA gen 0 0
2003 cflowdDeleted MI gen 0 0
2004 cflowdStateChanged MI gen 0 0
2005 cflowdCleared MI gen 0 0
2006 cflowdFlowCreateFailure MI gen 0 0
2007 cflowdFlowFlushFailure MI gen 0 0
2008 cflowdFlowUnsuppProto MI sup 0 0
CCAG:
CHASSIS:
2001 cardFailure MA gen 0 0
2002 cardInserted MI gen 4 0
2003 cardRemoved MI gen 0 0
2004 cardWrong MI gen 0 0
2005 EnvTemperatureTooHigh MA gen 0 0
...
DEBUG:
L 2001 traceEvent MI gen 0 0
DOT1X:
FILTER:
2001 filterPBRPacketsDropped MI gen 0 0
IGMP:
2001 vRtrIgmpIfRxQueryVerMismatch WA gen 0 0
2002 vRtrIgmpIfCModeRxQueryMismatch WA gen 0 0
IGMP_SNOOPING:
IP:
L 2001 clearRTMError MI gen 0 0
L 2002 ipEtherBroadcast MI gen 0 0
L 2003 ipDuplicateAddress MI gen 0 0
L 2004 ipArpInfoOverwritten MI gen 0 0
L 2005 fibAddFailed MA gen 0 0
L 2006 qosNetworkPolicyMallocFailed MA gen 0 0
L 2007 ipArpBadInterface MI gen 0 0
L 2008 ipArpDuplicateIpAddress MI gen 0 0
L 2009 ipArpDuplicateMacAddress MI gen 0 0
ISIS:
2001 vRtrIsisDatabaseOverload WA gen 0 0
2002 vRtrIsisManualAddressDrops WA gen 0 0
2003 vRtrIsisCorruptedLSPDetected WA gen 0 0
2004 vRtrIsisMaxSeqExceedAttempt WA gen 0 0
2005 vRtrIsisIDLenMismatch WA gen 0 0
2006 vRtrIsisMaxAreaAddrsMismatch WA gen 0 0
....
USER:
L 2001 cli_user_login MI gen 2 0
L 2002 cli_user_logout MI gen 1 0
L 2003 cli_user_login_failed MI gen 0 0
L 2004 cli_user_login_max_attempts MI gen 0 0
L 2005 ftp_user_login MI gen 0 0
L 2006 ftp_user_logout MI gen 0 0
L 2007 ftp_user_login_failed MI gen 0 0
L 2008 ftp_user_login_max_attempts MI gen 0 0
L 2009 cli_user_io MI sup 0 48
L 2010 snmp_user_set MI sup 0 0
L 2011 cli_config_io MI gen 4357 0
VRRP:
2001 vrrpTrapNewMaster MI gen 0 0
2002 vrrpTrapAuthFailure MI gen 0 0
2003 tmnxVrrpIPListMismatch MI gen 0 0
2004 tmnxVrrpIPListMismatchClear MI gen 0 0
2005 tmnxVrrpMultipleOwners MI gen 0 0
2006 tmnxVrrpBecameBackup MI gen 0 0
L 2007 vrrpPacketDiscarded MI gen 0 0
VRTR:
2001 tmnxVRtrMidRouteTCA MI gen 0 0
2002 tmnxVRtrHighRouteTCA MI gen 0 0
2003 tmnxVRtrHighRouteCleared MI gen 0 0
2004 tmnxVRtrIllegalLabelTCA MA gen 0 0
2005 tmnxVRtrMcastMidRouteTCA MI gen 0 0
2006 tmnxVRtrMcastMaxRoutesTCA MI gen 0 0
2007 tmnxVRtrMcastMaxRoutesCleared MI gen 0 0
2008 tmnxVRtrMaxArpEntriesTCA MA gen 0 0
2009 tmnxVRtrMaxArpEntriesCleared MI gen 0 0
2011 tmnxVRtrMaxRoutes MI gen 0 0
=======================================================================
A:ALA-1#
A:ALA-1# show log event-control ospf
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
2001 ospfVirtIfStateChange WA gen 0 0
2002 ospfNbrStateChange WA gen 1 0
2003 ospfVirtNbrStateChange WA gen 0 0
2004 ospfIfConfigError WA gen 0 0
2005 ospfVirtIfConfigError WA gen 0 0
2006 ospfIfAuthFailure WA gen 0 0
2007 ospfVirtIfAuthFailure WA gen 0 0
2008 ospfIfRxBadPacket WA gen 0 0
2009 ospfVirtIfRxBadPacket WA gen 0 0
2010 ospfTxRetransmit WA sup 0 0
2011 ospfVirtIfTxRetransmit WA sup 0 0
2012 ospfOriginateLsa WA sup 0 404
2013 ospfMaxAgeLsa WA gen 3 0
2014 ospfLsdbOverflow WA gen 0 0
2015 ospfLsdbApproachingOverflow WA gen 0 0
2016 ospfIfStateChange WA gen 2 0
2017 ospfNssaTranslatorStatusChange WA gen 0 0
2018 vRtrOspfSpfRunsStopped WA gen 0 0
2019 vRtrOspfSpfRunsRestarted WA gen 0 0
2020 vRtrOspfOverloadEntered WA gen 1 0
2021 vRtrOspfOverloadExited WA gen 0 0
2022 ospfRestartStatusChange WA gen 0 0
2023 ospfNbrRestartHelperStatusChange WA gen 0 0
2024 ospfVirtNbrRestartHelperStsChg WA gen 0 0
=======================================================================
A:ALA-1#
A:ALA-1# show log event-control ospf ospfVirtIfStateChange
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
2001 ospfVirtIfStateChange WA gen 0 0
=======================================================================
A:ALA-1#
A:dut-c# show log event-control "BGP" tBgpMaxNgPfxLmtThresholdReached detail
===============================================================================
Log event "tBgpMaxNgPfxLmtThresholdReached"
===============================================================================
Severity : major
Generated : true
Count : 0
Drop count : 1
Throttle : false
Specific throttle : false
Specific throttle limit : 0
Specific throttle interval (s) : 0
Specific throttle by default : false
Specific throttle limit default : 0
Specific throttle interval default(s) : 0
Repeat : false
Source stream : mainA:node-2# show log event-control "mgmt_core"
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
L 2001 mdConfigChange MI sup 0 197
L 2002 mdOcConfigChange MI sup 0 0
L 2003 mdBofConfigChange MI sup 0 23
L 2004 mdDebugConfigChange MI sup 0 0
=======================================================================
|
Label |
Description |
|---|---|
|
Application |
The application name. |
|
ID# |
The event ID number within the application. L ID# An "L” in front of an ID represents event types that do not generate an associated SNMP notification. Most events do generate a notification, only the exceptions are marked with a preceding "L”. |
|
Event Name |
The event name. |
|
P |
CL — The event has a cleared severity or priority. CR — The event has critical severity or priority. IN — The event has indeterminate severity or priority. MA — The event has major severity or priority. MI — The event has minor severity or priority. WA — The event has warning severity or priority. |
|
g/s |
gen — The event will be generated or logged by event control. sup — The event will be suppressed or dropped by event control. thr — Specifies that throttling is enabled. |
|
Logged |
The number of events logged or generated. |
|
Dropped |
The number of events dropped/suppressed. |
|
Severity |
The severity level of the event (cleared, indeterminate, critical, major, minor, or warning). |
|
Generated |
Indicates whether the log event is enabled (true) or suppressed (false). |
|
Count |
The number of events logged or generated. |
|
Drop count |
The number of events dropped/suppressed. |
|
Throttle |
Indicates whether the event is subject to global throttling (true or false). |
|
Specific throttle |
Indicates whether the event is subject to specific per event throttling (true or false). |
|
Specific throttle limit |
The configured number of events per interval for specific throttling. |
|
Specific throttle interval (s) |
The configured interval over which the specific throttling limit is applied. |
|
Specific throttle by default |
Indicates whether the specific throttling is enabled or not when it has not been explicitly configured. |
|
Specific throttle limit default |
The default number of events per-interval for specific throttling of this event. |
|
Specific throttle interval default (s) |
The default interval over which the specific default throttling limit is applied. |
|
Repeat |
Specifies that the log event should be repeated every minute until the underlying condition is cleared. |
|
Source stream |
Specifies the event source (main, security, change, debug or li). |
event-handling
event-handling
Syntax
event-handling
Context
[Tree] (show>log event-handling)
Full Context
show log event-handling
Description
Commands in this context display Event Handling System (EHS) information.
Platforms
All
event-handling
Syntax
event-handling
Context
[Tree] (clear>log event-handling)
Full Context
clear log event-handling
Description
Commands in this context clear Event Handling System (EHS) information.
Platforms
All
event-log
event-log
Syntax
event-log event-log-name syslog
Context
[Tree] (show>app-assure>group event-log)
Full Context
show application-assurance group event-log
Description
This command displays event log information.
Parameters
- event-log-name
-
Specifies the event log name, up to 32 characters.
- syslog
-
Specifies to display syslog information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following is an output example displaying event log information:
Output Example*A:Dut-B# show application-assurance group 1:1 event-log "sampleLog" syslog
===============================================================================
Application Assurance Group 1:1 Event Log "sampleLog" Syslog
===============================================================================
Event-log admin status : down
Description : (Not Specified)
Address : (Not Specified)
Port : 514
VLAN ID : (Not Specified)
Facility : local7
Severity : info
-------------------------------------------------------------------------------
ISA Events Sent Events Failed
-------------------------------------------------------------------------------
1/2 0 0
2/1 0 0
2/2 0 0
===============================================================================
*A:Dut-B#
event-log
Syntax
event-log log-event url file-url
event-log log-event isa mda-id [ url file-url]
Context
[Tree] (tools>dump>app-assure>group event-log)
Full Context
tools dump application-assurance group event-log
Description
This command displays application-assurance event-log information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
event-log
Syntax
event-log event-log-name
Context
[Tree] (clear>app-assure>group event-log)
Full Context
clear application-assurance group event-log
Description
This command clears the application assurance event log.
Parameters
- event-log-name
-
Specifies the event log name, up to 32 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
event-logs
event-logs
Syntax
event-logs [failure | degrade] [ active | cleared]
Context
[Tree] (show>port>ethernet>efm-oam event-logs)
Full Context
show port ethernet efm-oam event-logs
Description
This command displays all event logs.
Parameters
- failure | degrade
-
Only show logs with the specified severity.
- active | cleared
-
Only show logs with the specified state.
Platforms
All
event-parameters
event-parameters
Syntax
event-parameters [application-id [event-name | event-number]]
Context
[Tree] (show>log event-parameters)
Full Context
show log event-parameters
Description
This command displays an event's (or all events) common parameters and specific parameters. This allows a user to know what parameters can be passed from a triggering event to the triggered EHS script.
There is a common event parameter for all log events called 'timestamp' that contains the same information as 'gentime’, but in a different format and unit. The 'timestamp' parameter is only available to python3 applications.
Parameters
- application-id
-
Displays event parameters for the specified application.
- event-name
-
Displays event parameters for the named application event up to 32 characters in length.
- event-number
-
Displays event parameters for the specified application event number.
Platforms
All
Output
The following output is an example of log event parameter information.
Output Example# show log event-parameters "oam" 2001
=======================================================================
Common Event Parameters
appid
name
eventid
severity
subject
gentime
Event Specific Parameters
tmnxOamPingCtlOwnerIndex
tmnxOamPingCtlTestIndex
tmnxOamPingCtlTgtAddrType
tmnxOamPingCtlTgtAddress
tmnxOamPingResultsTestRunIndex
tmnxOamPingResultsOperStatus
tmnxOamPingResultsMinRtt
tmnxOamPingResultsMaxRtt
tmnxOamPingResultsAverageRtt
tmnxOamPingResultsRttSumOfSquares
tmnxOamPingResultsRttOFSumSquares
tmnxOamPingResultsMtuResponseSize
tmnxOamPingResultsSvcPing
tmnxOamPingResultsProbeResponses
tmnxOamPingResultsSentProbes
tmnxOamPingResultsLastGoodProbe
tmnxOamPingCtlTestMode
tmnxOamPingHistoryIndex
=======================================================================
events
events
Syntax
events [local | remote]
Context
[Tree] (clear>port>eth>efm-oam events)
Full Context
clear port ethernet efm-oam events
Description
This command clears all link monitoring events on the port.
Parameters
- local
-
Clears the local events only.
- remote
-
Clears the remote events only.
Platforms
All
evpn
evpn
Syntax
evpn mac-dup-detect ieee-address
evpn mac-dup-detect all
Context
[Tree] (clear>service>id evpn)
Full Context
clear service id evpn
Description
This command clears a duplicate MAC and restarts the MAC duplication process. It also clears black-hole MACs.
Parameters
- ieee-address
-
Specifies the MAC address, up to 30 characters.
- all
-
Specifies that the clear command applies to all duplicate MACs.
Platforms
All
evpn
Syntax
evpn usage
Context
[Tree] (tools>dump>service evpn)
Full Context
tools dump service evpn
Description
This command displays the consumed EVPN resources in the system. The VXLAN destinations include static VXLAN destinations as well as Ethernet Segment (ES) VXLAN destinations.
Platforms
All
Output
The following output is an example of consumed EVPN resources information and, EVPN Usage Information Fields describes the output fields.
Output ExampleA:PE-2# tools dump service evpn usage
vxlan-srv6-evpn-mpls usage statistics at 05/24/2024 11:23:38:
MPLS-TEP : 0
VXLAN-TEP : 0
SRV6-TEP : 5
Total-TEP : 5/ 16383
Mpls Dests (TEP, Egress Label + ES + ES-BMAC) : 0
Mpls Etree Leaf Dests : 0
Vxlan Dests (TEP, Egress VNI + ES) : 0
Srv6 Dests (TEP, SID + ES) : 7
Total-Dest : 7/196607
Sdp Bind + Evpn Dests : 7/245759
ES L2/L3 PBR : 0/ 32767
Evpn Etree Remote BUM Leaf Labels : 0
Evpn Etree MLDP Leaf Intf : 0/ 4096
EVPN ES Labels on MLDP Leaf Intf : 0/ 16380|
Label |
Description |
|---|---|
|
MPLS-TEP |
Specifies the number of MPLS tunnel endpoints (TEPs) |
|
VXLAN-TEP |
Specifies the number of VXLAN TEPs |
|
SRV6-TEP |
Specifies the number of SRv6 TEPs |
|
Total-TEP |
Specifies the total number of TEPs |
|
Mpls Dests (TEP, Egress Label + ES + ES-BMAC) |
Specifies the number of MPLS destinations |
|
Mpls Etree Leaf Dests |
Specifies the number of MPLS E-Tree leaf destinations |
|
Vxlan Dests (TEP, Egress VNI + ES) |
Specifies the number of VXLAN destinations |
|
Srv6 Dests (TEP, SID + ES) |
Specifies the number of SRv6 destinations |
|
Total-Dest |
Specifies the total number of destinations |
|
Sdp Bind + Evpn Dests |
Specifies the number of SDP bind and EVPN destinations |
|
ES L2/L3 PBR |
Specifies the number of elementary stream (ES) Layer 2 or Layer 3 policy-based routing (PBR) |
|
Evpn Etree Remote BUM Leaf Labels |
Specifies the number of EVPN E-Tree remote BUM leaf labels |
|
EVPN Etree MLDP Leaf Intf |
Specifies the number of mLDP interfaces on an mLDP Leaf (receiving P2MP traffic) where the interfaces are part of EVPN E-Tree services. Leaf, in this context, refers to mLDP leaf. This number also refers to the number of roots in E-Tree services that are joinable from an mLDP leaf (for example, the number of mLDP leaf interfaces). Since each root joined potentially causes an E-Tree leaf label from that root to be programmed against the mLDP leaf, it implicitly also indicates the number of programable labels. An entry here is counted as soon as an mLDP leaf is created in an E-Tree service. |
|
EVPN ES Labels on MLDP Leaf Intf |
Specifies the number of upstream ES labels programmed against mLDP leafs. This does not include unique upstream ES labels since these labels must be programmed on all mLDP leafs joining a specific root PE. |
evpn
Syntax
evpn evpn-type
Context
[Tree] (show>router>bgp>routes evpn)
Full Context
show router bgp routes evpn
Description
Commands in this context displays BGP EVPN routes.
Platforms
All
evpn
Syntax
evpn usage
Context
[Tree] (tools>dump>service>id evpn)
Full Context
tools dump service id evpn
Description
This command shows the maximum number of EVPN-tunnel interface IP next hops per R-VPLS as well as the current usage for a specified R-VPLS service.
Platforms
All
Output
The following output is an example of tools dump EVPN usage information.
Output Example*A:PE71# tools dump service id 504 evpn usage
Evpn Tunnel Interface IP Next Hop: 1/8189
evpn-l2-oper-attrs
evpn-l2-oper-attrs
Syntax
evpn-l2-oper-attrs
Context
[Tree] (show>service>id>bgp-evpn evpn-l2-oper-attrs)
Full Context
show service id bgp-evpn evpn-l2-oper-attrs
Description
This command displays information of all the TEPs for which the peer advertised a Layer 2 extended community.
Platforms
All
Output
The following command displays an example of all the TEPs for which the peer advertised a Layer 2 extended community and Show EVPN L2 TEP Information Fields describes the output fields.
Output Exampleshow service id 110 bgp-evpn evpn-l2-oper-attrs ===============================================================================
EVPN P2MP L2 Attributes
===============================================================================
TEP Address Oper State Oper Flags
-------------------------------------------------------------------------------
192.0.2.4 Down no-L2-comm
2001:db8::2 Up None
-------------------------------------------------------------------------------
Number of entries : 2
-------------------------------------------------------------------------------
===============================================================================
|
Label |
Description |
|---|---|
|
EVPN P2MP L2 Attributes |
|
|
TEP Address |
The TEP address |
|
Oper State |
The operational state |
|
Oper Flags |
The operational flags |
|
Number of entries |
The total number of matching entries |
evpn-mcast-gateway
evpn-mcast-gateway
Syntax
evpn-mcast-gateway {all | pim | mvpn}
Context
[Tree] (show>service>id evpn-mcast-gateway)
Full Context
show service id evpn-mcast-gateway
Description
This command displays the EVPN multicast gateway information.
Parameters
- all
-
Displays EVPN mulitcast gateway information for the MVPN-to-EVPN Gateway (MEG) and PIM-to-EVPN Gateway (PEG) cases.
- pim
-
Displays EVPN mulitcast gateway information for the PEG case.
- mvpn
-
Displays EVPN mulitcast gateway information for the MEG case.
Platforms
All
Output
The following output is an example of EVPN multicast gateway information, and Show EVPN Multicast Gateway Information Fields describes the output fields.
Output Example# show service id 2 evpn-mcast-gateway {all|pim|mvpn}
===============================================================================
Service Evpn Multicast Gateway
===============================================================================
Type : mvpn-pim
Admin State : Disabled
DR Activation Timer : 3 secs (default)
Mvpn Evpn Gateway DR : Yes
Pim Evpn Gateway DR : No
===============================================================================
The following output is an example of information displayed when the all or mvpn options are specified.
===============================================================================
Mvpn Evpn Gateway
===============================================================================
DR Activation Timer Remaining : 1 sec
DR : Yes
DR Last Change : 10/30/2019 14:03:30
===============================================================================
-------------------------------------------------------------------------------
Candidate list
-------------------------------------------------------------------------------
Orig-Ip Time Added
-------------------------------------------------------------------------------
10.20.1.2 10/30/2019 14:03:30
10.20.1.3 10/30/2019 14:14:12
-------------------------------------------------------------------------------
Number of entries: 2
-------------------------------------------------------------------------------
The following output is an example of information displayed when the all or pim options are specified.
===============================================================================
Pim Evpn Gateway
===============================================================================
DR Activation Timer Remaining : 0 sec
DR : No
DR Last Change : 10/30/2019 14:03:30
===============================================================================
-------------------------------------------------------------------------------
Candidate list
-------------------------------------------------------------------------------
Orig-Ip Time Added
-------------------------------------------------------------------------------
10.20.1.2 10/30/2019 14:03:30
10.20.1.3 10/30/2019 14:14:12
-------------------------------------------------------------------------------
Number of entries: 2
-------------------------------------------------------------------------------
Show EVPN Multicast Gateway Information Fields describes the EVPN multicast gateway output fields.
|
Label |
Description |
|---|---|
|
Service Evpn Multicast Gateway |
|
|
Type |
Displays the EVPN multicast gateway type |
|
Admin State |
Displays the administrative state |
|
DR Activation Timer |
Displays the DR activation timer value |
|
Mvpn Evpn Gateway |
Displays MVPN EVPN gateway designated router type |
|
Pim Evpn Gateway DR |
Displays the PIM EVPN gateway designated router type |
|
Mvpn Evpn Gateway/Pim Evpn Gateway |
|
|
DR Activation Timer Remaining |
Displays the number of seconds remaining for the DR activation timer |
|
DR |
Indicates DR status |
|
DR Last Change |
Displays the date and time of the last DR change |
|
Candidate list |
|
|
Orig-Ip |
Displays the originating IP address |
|
Time Added |
Displays the date and time of the candidate list entry |
|
Number of entries |
Displays the number of entries |
evpn-mpls
evpn-mpls
Syntax
evpn-mpls [tep-ip-address]
Context
[Tree] (show>service evpn-mpls)
Full Context
show service evpn-mpls
Description
This command shows the remote EVPN-MPLS tunnel endpoints in the system.
Parameters
- tep-ip-address
-
Specifies the IP address of a tunnel endpoint.
Platforms
All
Output
Output Example*A:PE70(4)# show service evpn-mpls
===============================================================================
EVPN MPLS Tunnel Endpoints
===============================================================================
EvpnMplsTEP Address EVPN-MPLS Dest ES Dest ES BMac Dest
-------------------------------------------------------------------------------
192.0.2.69 3 1 1
192.0.2.71 2 0 0
192.0.2.72 3 1 1
192.0.2.73 2 1 0
192.0.2.254 1 0 0
-------------------------------------------------------------------------------
Number of EvpnMpls Tunnel Endpoints: 5
-------------------------------------------------------------------------------
===============================================================================
*A:PE70(4)# show service evpn-mpls
<TEP ip-address>
192.0.2.69 192.0.2.71 192.0.2.72 192.0.2.73 192.0.2.254
*A:PE70(4)# show service evpn-mpls 192.0.2.69
===============================================================================
BGP EVPN-MPLS Dest
===============================================================================
Service Id Egr Label
-------------------------------------------------------------------------------
1 262140
1 262141
20000 262138
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest
===============================================================================
Service Id Eth Seg Id Egr Label
-------------------------------------------------------------------------------
1 01:00:00:00:00:71:00:00:00:01 262141
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN-MPLS ES BMac Dest
===============================================================================
Service Id ES BMac Egr Label
-------------------------------------------------------------------------------
20000 00:00:00:00:71:71 262138
-------------------------------------------------------------------------------
===============================================================================
evpn-mpls
Syntax
evpn-mpls esi esi [detail]
evpn-mpls esi esi instance instance-id [detail]
evpn-mpls es-bmac ieee-address
evpn-mpls [detail]
evpn-mpls instance instance-id [detail]
Context
[Tree] (show>service>id evpn-mpls)
Full Context
show service id evpn-mpls
Description
This command displays the existing EVPN-MPLS destinations for a specified service and all related information. The command allows filtering based on esi (for EVPN multi-homing) and es-bmac (for PBB-EVPN multi-homing) to display the EVPN-MPLS destinations associated to an Ethernet Segment Identifier (ESI).
Parameters
- esi
-
Specifies a 10-byte ESI by which to filter the displayed information. For example, ESI-0 | ESI-MAX or 00-11-22-33-44-55-66-77-88-99 with any of these separators ('-',':',' ')
- ieee-address
-
Specifies a 48-bit MAC address for which to display information. The parameter is entered in the form xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx, where xx represents a hexadecimal number.
- instance-id
-
Specifies the instance ID.
- detail
-
Displays detailed information.
Platforms
All
Output
Output Exampleshow service id 110 evpn-mpls BGP EVPN-MPLS Dest (Instance 1)
===============================================================================
TEP Address Transport:Tnl Egr Label Oper Mcast Num
State MACs
-------------------------------------------------------------------------------
2001:db8::2 ldp:65542 524244 Up bum 0
2001:db8::3 ldp:65540 524250 Up bum 0
-------------------------------------------------------------------------------
Number of entries : 2
===============================================================================
===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance 1)
===============================================================================
Eth SegId Num. Macs Last Update
-------------------------------------------------------------------------------
01:b6:47:ff:00:00:00:00:01:00 1 02/02/2023 12:48:43
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
show service id 110 evpn-mpls detail ===============================================================================
BGP EVPN-MPLS Dest (Instance 1)
===============================================================================
TEP Address Transport:Tnl Egr Label Oper Mcast Num
State MACs
-------------------------------------------------------------------------------
2001:db8::2 ldp:65542 524244 Up bum 0
Oper Flags : None
Sup BCast Domain : No
Last Update : 02/02/2023 12:44:07
2001:db8::3 ldp:65540 524250 Up bum 0
Oper Flags : None
Sup BCast Domain : No
Last Update : 02/02/2023 12:44:07
-------------------------------------------------------------------------------
Number of entries : 2
===============================================================================
===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance 1)
===============================================================================
Eth SegId Num. Macs Last Update
-------------------------------------------------------------------------------
01:b6:47:ff:00:00:00:00:01:00 1 02/02/2023 12:48:43
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
show service id 110 evpn-mpls esi 01:b6:47:ff:00:00:00:00:01:00 detail ===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance: 1)
===============================================================================
Eth SegId Num. Macs Last Update
-------------------------------------------------------------------------------
01:b6:47:ff:00:00:00:00:01:00 1 02/02/2023 12:48:43
===============================================================================
===============================================================================
BGP EVPN-MPLS Dest TEP Info (Instance 1)
===============================================================================
TEP Address Egr Label Transport:Tnl- Oper
Id State
-------------------------------------------------------------------------------
2001:db8::2 524246 ldp:65542 Up
Oper Flags : None
Last Update : 02/02/2023 12:48:43
-------------------------------------------------------------------------------
Number of entries : 1
===============================================================================
show service id 20000 evpn-mpls es-bmac 00:00:00:00:71:71===============================================================================
BGP EVPN-MPLS ES BMAC Dest
===============================================================================
vBmacAddr Num. Macs Last Change
-------------------------------------------------------------------------------
00:00:00:00:71:71 1 07/15/2015 19:44:10
===============================================================================
===============================================================================
BGP EVPN-MPLS ES BMAC Dest TEP Info
===============================================================================
TEP Address Egr Label Last Change
Transport
-------------------------------------------------------------------------------
192.0.2.69 262138 07/15/2015 19:44:10
ldp
-------------------------------------------------------------------------------
Number of entries : 1
-------------------------------------------------------------------------------
===============================================================================
The following table describes the EVPN-MPLS output fields.
|
Label |
Description |
|---|---|
|
vBmacAddr |
Displays the vBmac address |
|
Num. Macs |
Displays the number of MACs |
|
Last Change |
Indicates the time of the most recent state changes |
|
TEP Address |
Displays the TEP address |
|
Egr Label |
Displays the egress label |
|
Transport |
Displays the transport type |
|
Number of entries |
Indicates the number of entries |
|
Eth SegId |
Displays the Ethernet Segment ID |
|
Transport:Tnl-Id |
Displays the tunnel type and tunnel ID of the EVPN-MPLS entry |
|
Transport:Tnl |
Displays the transport tunnel |
|
Num. MAC |
Displays the number of MACs |
|
Oper State |
Disaplays the operational state |
|
Oper Flags |
Displays the operational flags |
|
Mcast |
Displays the multicast information |
|
Sup BCast Domain |
Displays the Sup BCast Domain |
evpn-proxy-db
evpn-proxy-db
Syntax
evpn-proxy-db [detail]
evpn-proxy-db [group grp-ip-address]
Context
[Tree] (show>service>id>igmp-snooping evpn-proxy-db)
[Tree] (show>service>id>mld-snooping evpn-proxy-db)
Full Context
show service id igmp-snooping evpn-proxy-db
show service id mld-snooping evpn-proxy-db
Description
This command displays the EVPN proxy database that is created when config>service>vpls> igmp/mld-snooping>evpn-proxy is enabled in the service. The EVPN proxy database is populated with local reports received on SAP or SDP binds but not with the received SMET routes. The output shows the IGMP and MLD versions of the database entries that are conveyed in the SMET routes advertised for the entries.
Parameters
- grp-ip-address
-
Specifies the group IP address, in dotted decimal notation.
- detail
-
Specifies detailed information for the EVPN proxy database.
Platforms
All
Output
The following output is an example of EVPN proxy database information.
Output ExampleA:PE-2# show service id 4000 igmp-snooping evpn-proxy-db
===============================================================================
IGMP Snooping Evpn-Proxy-reporting DB for service 4000
===============================================================================
Group Address Mode Up Time Num Sources V1 V2 V3
-------------------------------------------------------------------------------
239.0.0.1 exclude 0d 00:53:55 0 V3
239.0.0.2 include 0d 00:53:55 1 V3
-------------------------------------------------------------------------------
Number of groups: 2
===============================================================================
EVPN Proxy Field Descriptions describes EVPN proxy output fields.
|
Field |
Description |
|---|---|
|
Group Address |
Group IP address |
|
Mode |
IGMPv3 or MLDv2 mode |
|
Up Time |
Time that the group is added |
|
Num Sources |
Number of sources |
|
V1 |
IGMP/MLD version of the database |
|
V2 |
IGMP/MLD version of the database |
|
V3 |
IGMP version of the database |
excessive-sources
excessive-sources
Syntax
excessive-sources [service-id service-id sap-id sap-id]
Context
[Tree] (show>system>security>cpu-protection excessive-sources)
Full Context
show system security cpu-protection excessive-sources
Description
This command displays sources exceeding their per-source rate limit.
Parameters
- service-id
-
Displays information for services exceeding their per-source rate limit.
- sap-id
-
Displays information for SAPs exceeding their per-source rate limit.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS
excessive-sources
Syntax
excessive-sources
Context
[Tree] (clear>cpu-protection excessive-sources)
Full Context
clear cpu-protection excessive-sources
Description
This command clears the records of sources exceeding their per-source rate limit.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS
exercise
exercise
Syntax
exercise aps-id {protect | working}
Context
[Tree] (tools>perform>aps exercise)
Full Context
tools perform aps exercise
Description
This command performs an exercise request on the protection or working circuit.
Parameters
- aps-id
-
Specifies the APS ID.
- protect
-
This command clears a physical port that is acting as the protection circuit for the APS group.
- working
-
This command clears a physical port that is acting as the working circuit for this APS group.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e
expand-wildcard-path
expand-wildcard-path
Syntax
expand-wildcard-path path
Context
[Tree] (tools>dump>system>telemetry expand-wildcard-path)
Full Context
tools dump system telemetry expand-wildcard-path
Description
This command expands XML Paths (XPaths) to include multiple wildcards.
Parameters
- path
-
Specifies the XPath that contains the wildcards.
Platforms
All
Output
Output Example# tools dump system telemetry expand-wildcard-path "/state/card/.../oper-state"
=======================================================================
Expanded paths
=======================================================================
/state/card[slot-number=*]/hardware-data/oper-state
/state/card[slot-number=*]/mda[mda-slot=*]/hardware-data/oper-state
/state/card[slot-number=*]/mda[mda-slot=*]/flex[group-index=*]/oper-state
=======================================================================
explicit-subscriber-map
explicit-subscriber-map
Syntax
explicit-subscriber-map
Context
[Tree] (show>subscr-mgmt explicit-subscriber-map)
Full Context
show subscriber-mgmt explicit-subscriber-map
Description
This command displays explicit subscriber mappings.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subscriber management explicit subscriber map information.
Output ExampleB:Dut-A>show>subscr-mgmt# explicit-subscriber-map
===============================================================================
Explicit Subscriber Map
===============================================================================
Key Sub profile
SLA profile
-------------------------------------------------------------------------------
sub_ident_A_1 sub_prof80
sla_prof80
-------------------------------------------------------------------------------
Number of Explicit Subscriber Mappings : 1
===============================================================================
B:Dut-A>show>subscr-mgmt#
Explicit Subscriber Map Field Descriptions describes subscriber management explicit subscriber map output fields.
|
Field |
Description |
|---|---|
|
Key |
The explicit subscriber mapping |
|
Number of Explicit Subscriber Mappings |
The number of configured explicit subscriber mappings |
export
export
Syntax
export
Context
[Tree] (clear>router>isis export)
Full Context
clear router isis export
Description
This command re-evaluates route policies participating in the export mechanism, either as importers or exporters of routes.
Platforms
All
export
export
Syntax
export
Context
[Tree] (clear>router>rip export)
Full Context
clear router rip export
Description
This command re-evaluates RIP export policies.
Platforms
All
export
Syntax
export
Context
[Tree] (clear>router>ripng export)
Full Context
clear router ripng export
Description
This command re-evaluates RIPng export policies.
Platforms
All
extranet-interface
extranet-interface
Syntax
extranet-interface
Context
[Tree] (show>router>pim extranet-interface)
Full Context
show router pim extranet-interface
Description
This command displays extranet interface information.
Platforms
All