s Commands – Part III
statistics-summary
statistics-summary
Syntax
statistics-summary [active] [family]
Context
[Tree] (show>router>ldp statistics-summary)
Full Context
show router ldp statistics-summary
Description
This command displays LDP statistics summary information.
Parameters
- active
-
Displays LDP statistics for only active paths.
- family
-
Displays either IPv4 or IPv6 LDP information.
Platforms
All
Output
Output Example*A:Dut-A# show router ldp statistics-summary
===============================================================================
Statistics Summary
===============================================================================
LDP FEC IPv4 Prefix Egress statistics : 0
LDP FEC IPv6 Prefix Egress statistics : 0
===============================================================================
*A:Dut-A#
statistics-summary
Syntax
statistics-summary
Context
[Tree] (show>router>mpls statistics-summary)
Full Context
show router mpls statistics-summary
Description
This command displays the number of LSP statistics configured.
Platforms
All
Output
The following output is an example of MPLS statistics summary information.
Output Example*A:SRU4>config>router>mpls# show router mpls statistics-summary
===============================================================================
Statistics Summary
===============================================================================
LSP egress statistics : 0
LSP ingress statistics : 0
===============================================================================
*A:SRU4>config>router>mpls#
stats
stats
Syntax
stats
Context
[Tree] (tools>dump>ipsec stats)
Full Context
tools dump ipsec stats
Description
Commands in this context dump the IPsec statistics.
Platforms
All
stats
Syntax
stats
Context
[Tree] (clear>ipsec stats)
Full Context
clear ipsec stats
Description
Commands in this context clear IKE statistics.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
status
status
Syntax
status
Context
[Tree] (show>call-trace status)
Full Context
show call-trace status
Description
This command gives a router-wide overview of call-trace operational data, such as number of configured profile, number of jobs and status of the compact flash.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of call trace status information.
Output Example===============================================================================
Call trace status
===============================================================================
No. of trace profiles: 1
No. of trace jobs : 0
-------------------------------------------------------------------------------
Primary CF : CF1 Max files number : 200
CF1 state : enabled CF1 volume limit : 1000 MB
CF2 state : enabled CF2 volume limit : 1000 MB
Output fields: call trace status describes call trace status output field information.
|
Field |
Descriptions |
|---|---|
|
No. of trace profiles |
The number of profiles configured in the system |
|
No. of trace jobs |
The number of trace jobs |
|
Primary CF |
The compact flash card to be used as the primary local storage location to save the generated call trace log files |
|
Max files number |
The cumulative number of call trace log files present on all cflash cards on the active CPM that are being used for local storage has reached the limit |
|
CF1 state |
The status of a call trace job on CF2. "running” indicates the job is active and is tracing events triggered by the host being monitored. "finished” indicates the job has already finished and is not tracing events generated by the host anymore. |
|
CF1 volume limit |
The data volume limit for the CF1 call trace job |
|
CF2 state |
The status of a call trace job on CF2. "running” indicates the job is active and is tracing events triggered by the host being monitored. "finished” indicates the job has already finished and is not tracing events generated by the host anymore. |
|
CF2 volume limit |
The data volume limit for the CF2 call trace job |
status
Syntax
status
Context
[Tree] (show>router>igmp status)
Full Context
show router igmp status
Description
This command displays IGMP status information.
If IGMP is not enabled, the following message appears:
A:NYC# show router igmp status
MINOR: CLI IGMP is not configured.
A:NYC#
Platforms
All
Output
The following output is an example of IGMP status information. Output fields: IGMP status provides IGMP status field descriptions.
Output Example*A:ALA-BA# show router 100 igmp status
===============================================================================
IGMP Status
===============================================================================
Admin State : Up
Oper State : Up
Query Interval : 1024
Last Member Query Interval : 1024
Query Response Interval : 1023
Robust Count : 10
===============================================================================
*A:ALA-BA#
|
Label |
Description |
|---|---|
|
Admin State |
The administrative status of IGMP. |
|
Oper State |
The current operating state of this IGMP protocol instance on this router. |
|
Query Interval |
The frequency at which IGMP query packets are transmitted. |
|
Last Member Query Interval |
The maximum response time inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. |
|
Query Response Interval |
The maximum query response time advertised in IGMPv2 queries. |
|
Robust Count |
The number of times the router will retry a query. |
status
Syntax
status
Context
[Tree] (show>service>id>spb status)
Full Context
show service id spb status
Description
This command displays SPB status.
Platforms
All
Output
The following output is an example of service SPB status information.
Output ExampleA:cses-B01# show service id spb status
===============================================================================
ISIS Status
===============================================================================
System Id : 0000.00AA.AAAA
Admin State : Up
Oper State : Up
SPB Routing : Enabled
Last Enabled : 07/23/2012 16:01:06
Level Capability : L1
Authentication Check : True
Authentication Type : None
CSNP-Authentication : Enabled
HELLO-Authentication : Enabled
PSNP-Authentication : Enabled
Overload-On-Boot Tim*: 0
LSP Lifetime : 1200
LSP Wait : 5 sec (Max) 0 sec (Initial) 1 sec (Second)
LSP MTU Size : 1492 (Config) 1492 (Oper)
Adjacency Check : loose
L1 Auth Type : none
L1 CSNP-Authenticati*: Enabled
L1 HELLO-Authenticat*: Enabled
L1 PSNP-Authenticati*: Enabled
L1 Preference : 15
L1 Ext. Preference : 160
L1 Wide Metrics : Enabled
L1 LSDB Overload : Disabled
L1 LSPs : 4
L1 Default Metric : 10
L1 IPv6 Def Metric : 10
Last SPF : 07/23/2012 16:01:29
SPF Wait : 10 sec (Max) 1000 ms (Initial) 1000 ms (Second)
Multi-topology : Disabled
Area Addresses : 00
Total Exp Routes(L1) : 0
IID TLV : Disabled
All-L1-MacAddr : 01:80:c2:00:00:14
===============================================================================
status
Syntax
status [family]
Context
[Tree] (show>service>id>pim-snooping status)
Full Context
show service id pim-snooping status
Description
This command displays PIM status information.
Parameters
- family
-
Displays either IPv4 or IPv6 status information
Platforms
All
Output
The following output is an example of service PIM snooping status information.
Output Example*A:PE# show service id 1 pim-snooping status
===============================================================================
PIM Snooping Status ipv4
===============================================================================
Admin State : Up
Oper State : Up
Mode Admin : Proxy
Mode Oper : Proxy
Hold Time : 90
Designated Router : 10.0.1.2
J/P Tracking : Inactive
Up Time : 0d 00:08:43
Group Policy : None
===============================================================================
*A:PE#
status
Syntax
status
Context
[Tree] (show>router>ldp status)
Full Context
show router ldp status
Description
This command displays LDP status information.
Platforms
All
Output
LDP Status Output
Output fields: LDP status describes the LDP status output fields.
Output Example*A:Sim>config>router>ldp# show router ldp status
===============================================================================
LDP Status for IPv4 LSR ID 0.0.0.0
IPv6 LSR ID ::
===============================================================================
Created at : 02/01/22 16:19:46
Last Change : 02/01/22 16:19:46
Admin State : Up
IPv4 Oper State : Down IPv6 Oper State : Down
IPv4 Down Time : 2d 03:47:02 IPv6 Down Time : 2d 03:47:02
IPv4 Oper Down Rea*: systemIpDown IPv6 Oper Down Reason: systemIpDown
IPv4 Oper Down Eve*: 0 IPv6 Oper Down Events: 0
Tunn Down Damp Time: 3 sec Weighted ECMP : Disabled
Tunnel Table Pref : 9
Label Withdraw Del*: 0 sec Implicit Null Label : Disabled
Short. TTL Local : Enabled Short. TTL Transit : Enabled
ConsiderSysIPInGep : Disabled
Imp Ucast Policies : None Exp Ucast Policies : None
Imp Mcast Policies : None
Tunl Exp Policies : None Tunl Imp Policies : None
FRR : Disabled Mcast Upstream FRR : Disabled
Mcast Upst ASBR FRR: Disabled ASBR MoFRR Loop Detct: Disabled
MP MBB Time : 3
Aggregate Prefix : False Agg Prefix Policies : None
Class Forwarding : Disabled
Legacy LSR Interop : False
Entropy Label Capa*: False
Generate Basic FEC : Disabled
Resolve Root Using : ucastRtm
Import PMSI Routes : None
Cfg Max ECMP Routes: 32 Oper ECMP : 1
-------------------------------------------------------------------------------
Capabilities
-------------------------------------------------------------------------------
Dynamic : Enabled P2MP : Enabled
IPv4 Prefix Fec : Enabled IPv6 Prefix Fec : Enabled
Service Fec128 : Enabled Service Fec129 : Enabled
MP MBB : Enabled Overload : Enabled
Unrecognized Notif*: Enabled
===============================================================================
|
Label |
Description |
|---|---|
|
Created at |
The date and time when the LDP instance was created. |
|
Last Change |
The date and time when the LDP instance was last modified. |
|
Admin State |
Up — The LDP is administratively enabled. Down — The LDP is administratively disabled. |
|
Oper State |
Up — The LDP is operationally enabled. Down — The LDP is operationally disabled. |
|
Up Time |
The time, in hundredths of seconds, that the LDP instance has been operationally up. |
|
Oper Down Reason |
The reason for the operational down status. |
|
Oper Down Events |
The number of times the LDP instance has gone operationally down since the instance was created. |
|
Tunn Down Damp Time |
Indicates the value configured by tunnel-down-damp-time. |
|
Weighted ECMP |
Indicates whether weighted ecmp is enabled or not. |
|
Label Withdraw Del* |
Indicates the value configured by label-withdrawal-delay. |
|
Implicit Null Label |
Indicates whether implicit null is supported. |
|
Short. TTL Local |
Indicates whether shortcut-local-ttl-propagate is enabled or not. |
|
Short. TTL Transit |
Indicates whether shortcut-transit-ttl-propagate is enabled or not. |
|
ConsiderSysIPByPol* |
Whether consider-system-ip-in-gep is enabled. |
|
Imp Ucast Policies |
Lists the applied import unicast policies, if any. Up to five import policies can be specified. |
|
Exp Ucast Policies |
Lists the applied export unicast policies, if any. Up to five import policies can be specified. |
|
Imp Mcast Policies |
Lists the applied import multicast policies, if any. Up to five import policies can be specified. |
|
Tunl Exp Policies |
Lists the applied tunnel export policies, if any. Up to five import policies can be specified. |
|
FRR |
Indicates whether Fast ReRoute is enabled or not. |
|
Mcast Upstream FRR |
Indicates whether multicast upstream fast reroute has been enabled or not. |
|
Mcast Upst ASBR FRR |
Indicates whether multicast upstream fast reroute has been enabled or not at ASBR. |
|
MP MBB Time |
Indicates the value configured by mp-mbb-time. |
|
Aggregate Prefix |
Indicates whether aggregate-prefix-match has been enabled or not. |
|
Agg Prefix Policies |
Lists the policies for the aggregate prefix match, if any. Up to five aggregate prefix policies can be specified. |
|
Class Forwarding |
Indicates whether class forwarding is in the enabled or disabled mode. Enabled modes are (lsr, ler, or lsr-and-ler). |
|
Legacy LSR Interop |
Indicates whether legacy LSR interoperability has been enabled or not. |
|
Entropy Label Capa* |
Indicates whether the support for entropy label is enabled or not. |
|
Generate Basic FEC |
Indicates whether generate-basic-fec-only has been enabled or not. |
|
Resolve Via Mcast * |
Indicates whether the route for the root address of P2MP FECs will be resolved using the unicast routing table or the multicast routing table. |
|
Capabilities |
|
|
Dynamic |
Indicates whether LDP supports changing capabilities dynamically using the LDP Capability message, or only in the Initialization message. |
|
P2MP |
Indicates whether LDP supports exchanging P2MP FECs. |
|
IPv4 Prefix Fec |
Indicates whether LDP supports exchanging IPv4 Prefix FECs. |
|
IPv6 Prefix Fec |
Indicates whether LDP supports exchanging IPv6 Prefix FECs. |
|
Service Fec128 |
Indicates whether LDP supports exchanging basic pseudowire service FECs. |
|
Service Fec129 |
Indicates whether LDP supports exchanging generalized pseudowire (PWE3) service FECs. |
|
MP MBB |
Indicates whether MP MBB is enabled or not. |
|
Overload |
Indicates whether LDP supports sending and receiving overload notification messages (Nokia vendor extension). |
|
Unrecognized Notif* |
Indicates whether LDP supports receiving notification messages with an unrecognized status; required for the end-of-lib feature (RFC 5919). |
status
Syntax
status
Context
[Tree] (show>router>mpls status)
Full Context
show router mpls status
Description
This command displays MPLS operation information.
Platforms
All
Output
The following output is an example of MPLS status information.
Output fields: MPLS status describes MPLS status output fields.
Output Example# show router mpls status
===============================================================================
MPLS Status
===============================================================================
Admin Status : Up
Oper(V4) State : Up Oper(V6) State : Up
IPv4 Oper Down Reason : n/a
IPv6 Oper Down Reason : n/a
FRR Object : Enabled Resignal Timer : Disabled
Hold Timer : 1 seconds Next Resignal : N/A
Srlg Frr : Disabled Srlg Frr Strict : Disabled
Admin Group Frr : Disabled
Dynamic Bypass : Enabled User Srlg Database : Disabled
BypassResignalTimer : Disabled BypassNextResignal : N/A
LeastFill Min Thd : 5 percent LeastFill Reopti Thd : 10 percent
Local TTL Prop : Enabled Transit TTL Prop : Enabled
P2mp TTL Prop : Disabled
AB Sample Multiplier : 1 AB Adjust Multiplier : 288
Exp Backoff Retry : Disabled CSPF On Loose Hop : Disabled
Lsp Init RetryTimeout : 30 seconds MBB Pref Current Hops : Disabled
Logger Event Bundling : Disabled
Retry on IGP Overload : Disabled Resignal on IGP Overload : Enabled
P2mp Resignal Timer : Disabled P2mp Next Resignal : N/A
Sec FastRetryTimer : Disabled Static LSP FR Timer : 30 seconds
P2P Max Bypass Association: 1000
Max Bypass PLR Association: 16
P2PActPathFastRetry : Disabled P2MP S2L Fast Retry : Disabled
In Maintenance Mode : No
MplsTp : Disabled
Next Available Lsp Index : 2
Entropy Label RSVP-TE : Enabled Entropy Label SR-TE : Enabled
PCE Report RSVP-TE : Disabled PCE Report SR-TE : Disabled
PCE Init LSP : Disabled
SR-TE Resignal Timer : Disabled SR-TE Resig on IGP Event : Disabled
LSP History : Enabled LSP History Recording : Enabled
LSP Self Ping Timeout : 300 seconds LSP Self Ping Interval : 2 seconds
LSP Self Ping RSVP TE : Enabled
===============================================================================
MPLS LSP Count
===============================================================================
Originate Transit Terminate
-------------------------------------------------------------------------------
Static LSPs 0 0 0
Dynamic LSPs 1 0 0
Detour LSPs 0 0 0
P2MP S2Ls 0 0 0
MPLS-TP LSPs 0 0 0
Mesh-P2P LSPs 0 N/A N/A
One Hop-P2P LSPs 0 N/A N/A
SR-TE LSPs 0 N/A N/A
Mesh-P2P SR-TE LSPs 0 N/A N/A
One Hop-P2P SR-TE LSPs 0 N/A N/A
PCE Init SR-TE LSPs 0 N/A N/A
===============================================================================
|
Label |
Description |
|---|---|
|
Admin Status |
Down — MPLS is administratively disabled. Up — MPLS is administratively enabled. |
|
Oper Status |
Down — MPLS is operationally down. Up — MPLS is operationally up. |
|
Oper Down Reason |
Specifies the operational down cause. |
|
FRR Object |
Enabled — Specifies that Fast reroute object is signaled for the LSP. Disabled — Specifies that Fast reroute object is not signaled for the LSP. |
|
Resignal Timer |
Enabled — Specifies that the resignal timer is enabled for the LSP. Disabled — Specifies that the resignal timer is disabled for the LSP. |
|
Hold Timer |
Displays the amount of time that the ingress node holds before programming its data plane and declaring the LSP up to the service module. |
|
Next Resignal |
Specifies the next resignal value. |
|
Srlg Frr |
Enabled — Specifies that SRLG Fast reroute is signaled for the LSP. Disabled — Specifies that SRLG Fast reroute is not signaled for the LSP. |
|
Srlg Frr Strict |
Enabled — Specifies that SRLG Fast reroute strict is signaled for the LSP. Disabled — Specifies that SRLG Fast reroute strict is not signaled for the LSP. |
|
Admin Group Frr |
Enabled — Specifies that the administrative group Fast reroute is signaled for the LSP. Disabled — Specifies that the administrative group Fast reroute is not signaled for the LSP. |
|
Dynamic Bypass |
Enabled — Specifies that dynamic bypass is enabled. Disabled — Specifies that dynamic bypass is disabled. |
|
User Srlg Database |
Enabled — Specifies that user SRLG databases are enabled. Disabled — Specifies that user SRLG databases are disabled. |
|
BypassResignalTimer |
Enabled — Specifies that the bypass resignal timer is enabled. Disabled — Specifies that the bypass resignal timer is disabled. |
|
BypassNextResignal |
Specifies the bypass next resignal value. |
|
LeastFill Min Thd |
Specifies the least fill minimum threshold percentage value. |
|
LeastFill Reopti Thd |
Specifies the least fill re-optimization threshold percentage value. |
|
Local TTL Prop |
Enabled — Specifies that local TTL property is enabled. Disabled — Specifies that local TTL property is disabled. |
|
Transit TTL Prop |
Enabled — Specifies that transit TTL property is enabled. Disabled — Specifies that transit TTL property is disabled. |
|
P2mp TTL Prop |
Enabled — Specifies that the uniform mode of operation is configured for RSVP P2MP LSPs. Disabled — Specifies that the pipe mode of operation is configured for RSVP P2MP LSPs. |
|
AB Sample Multiplier |
Specifies the AB sample multiplier value. |
|
AB Adjust Multiplier |
Specifies the AB adjust multiplier value. |
|
Exp Backoff Retry |
Enabled — Specifies that Exp Backoff retry is enabled. Disabled — Specifies that Exp Backoff is disabled. |
|
CSPF On Loose Hop |
Enabled — Specifies that CSPF On Loose Hop is enabled. Disabled — Specifies that CSPF On Loose Hop is disabled. |
|
Lsp Init RetryTimeout |
Specifies the LSP Init RetryTimeout seconds value. |
|
MBB Pref Current Hops |
Enabled — Specifies that MBB Pref Current Hops is enabled. Disabled — Specifies that MBB Pref Current Hops is disabled. |
|
Logger Event Bundling |
Enabled — Specifies that Logger Event Bundling is enabled. Disabled — Specifies that Logger Event Bundling is disabled. |
|
Retry on IGP Overload |
Enabled — Specifies that Retry on IGP Overload is enabled. Disabled — Specifies that Retry on IGP Overload is disabled. |
|
Resignal on IGP Overload |
Enabled — Specifies that Resignal on IGP Overload is enabled. Disabled — Specifies that Resignal on IGP Overload is disabled. |
|
P2mp Resignal Timer |
Enabled — Specifies that the P2MP Resignal Timer is enabled. Disabled — Specifies that the P2MP Resignal Timer is disabled. |
|
P2mp Next Resignal |
Specifies the P2MP Next Resignal Timer value. |
|
Sec FastRetryTimer |
Enabled — Specifies that the Sec Fast RetryTimer is enabled. Disabled — Specifies that the Sec Fast RetryTimer is disabled. |
|
Static LSP FR Timer |
Specifies the Static LSP FR Timer seconds value. |
|
P2P Max Bypass Association |
Specifies the P2P Max Bypass Association value. |
|
P2PActPathFastRetry |
Enabled — Specifies that the P2P ActPath Fast Retry is enabled. Disabled — Specifies that the P2P ActPath Fast Retry is disabled. |
|
P2MP S2L Fast Retry |
Enabled — Specifies that the P2MP S2L Fast Retry is enabled. Disabled — Specifies that the P2MP S2L Fast Retry is disabled. |
|
In Maintenance Mode |
No — Specifies that the system is not in maintenance mode. Yes — Specifies that the system is in maintenance mode. |
|
MplsTp |
Enabled — Specifies that MPLS TP is enabled. Disabled — Specifies that MPLS TP is disabled. |
|
Next Available Lsp Index |
Specifies the next available LSP index value. |
|
Entropy Label RSVP-TE |
Enabled — Specifies that Entropy Label RSVP-TE is enabled. Disabled — Specifies that Entropy Label RSVP-TE is disabled. |
|
Entropy Label SR-TE |
Enabled — Specifies that Entropy Label SR-TE is enabled. Disabled — Specifies that Entropy Label SR-TE is disabled. |
|
PCE Report RSVP-TE |
Enabled — Specifies that PCE Report RSVP-TE is enabled. Disabled — Specifies that PCE Report RSVP-TE is disabled. |
|
PCE Report SR-TE |
Enabled — Specifies that PCE Report SR-TE is enabled. Disabled — Specifies that PCE Report SR-TE is disabled. |
|
PCE Init LSP |
Enabled — Specifies that PCE Init LSP is enabled. Disabled — Specifies that PCE Init LSP is disabled. |
|
PCE Init SR-TE |
Enabled — Specifies that PCE Init LSP SR-TE is enabled. Disabled — Specifies that PCE Init LSP SR-TE is disabled. |
|
PCE Init SR-TE Admin State |
Up — Specifies that the PCE Init SR-TE Admin State is up. Down — Specifies that the PCE Init SR-TE Admin State is down. |
|
PCE Init SR-TE Oper State |
Up — Specifies that the PCE Init SR-TE Operational State is up. Down — Specifies that the PCE Init SR-TE Operational State is down. |
|
PCE Init SR-TE Oper Dn Rsn |
Specifies the reason for the PCE Init SR-TE Operationally down. |
| LSP History |
Enabled — Specifies that the LSP history is enabled. Disabled — Specifies that the LSP history is disabled. |
| LSP History Recording |
Enabled — Specifies that the LSP history recording is enabled. Disabled — Specifies that the LSP history recording is disabled. |
|
LSP Self Ping Timeout |
Specifies the LSP Self Ping timeout value. |
|
LSP Self Ping Interval |
Specifies the LSP Self Ping interval value. |
|
LSP Self Ping RSVP TE |
Specifies the status of LSP Self Ping RSVP TE. |
|
Originate |
Specifies the number of originations for the various LSP types. |
|
Transit |
Specifies the number of transits for the various LSP types. |
|
Terminate |
Specifies the number of terminations for the various LSP types. |
status
Syntax
status
Context
[Tree] (show>router>mpls>mpls-tp status)
Full Context
show router mpls mpls-tp status
Description
This command displays MPLS-TP system configuration information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of MPLS TP status information .
Output Example*A:mlstp-dutA# show router mpls mpls-tp status
===============================================================================
MPLS-TP Status
===============================================================================
Admin Status : Up
Global ID : 42 Node ID : 0.0.3.233
Tunnel Id Min : 1 Tunnel Id Max : 4096
===============================================================================
status
Syntax
status
Context
[Tree] (show>router>rsvp status)
Full Context
show router rsvp status
Description
This command displays RSVP status.
Platforms
All
Output
The following output is an example of RSVP status information.
Output fields: RSVP status describes RSVP status output fields.
|
Label |
Description |
|---|---|
|
Admin Status |
Down — RSVP is administratively disabled. Up — RSVP is administratively enabled. |
|
Oper Status |
Down — RSVP is operationally down. Up — RSVP is operationally up. |
|
Keep Multiplier |
Displays the keep-multiplier number used by RSVP to declare that a reservation is down or the neighbor is down. |
|
Refresh Time |
Displays the refresh-time interval (in s), between the successive Path and Resv refresh messages. |
|
Message Pacing |
Enabled — RSVP messages, specified in the max-burst command, are sent in a configured interval, specified in the period command. Disabled — Message pacing is disabled. RSVP message transmission is not regulated. |
|
Pacing Period |
Displays the time interval (in ms), when the router can send the specified number of RSVP messages specified in the rsvp max-burst command. |
|
Max Packet Burst |
Displays the maximum number of RSVP messages that are sent in the specified period under normal operating conditions. |
|
Soft Preemption Timer |
Displays the time (in s), a node holds on to a reservation for which it has triggered the soft preemption procedure. |
|
Rapid Retransmit |
Displays the value of the rapid retransmission interval. |
|
Rapid Retry Limit |
Displays the rapid retry limit. |
|
Graceful Shutdown |
Specifies whether graceful shutdown of the RSVP node is enabled. |
|
Dark Bandwidth |
Indicates the status of the dark bandwidth accounting application. |
|
DBw Sample Intv |
Displays the configured dark bandwidth sampling interval. |
|
DBw Up Threshold |
Displays the configured dark bandwidth up threshold. |
|
DBw Down Threshold |
Displays the configured dark bandwidth down threshold. |
|
DBw Multiplier |
Displays the configured dark bandwidth multiplier. |
|
DBw Sample Multp |
Displays the configured dark bandwidth sample multiplier. |
B:# show router rsvp status
========================================================================
RSVP Status
========================================================================
Admin Status : Down Oper Status : Down
Keep Multiplier : 3 Refresh Time : 30 sec
Message Pacing : Disabled Pacing Period : 100 msec
Max Packet Burst : 650 msgs Refresh Bypass : Disabled
Rapid Retransmit : 5 hmsec Rapid Retry Limit : 3
Graceful Shutdown : Disabled SoftPreemptionTimer: 300 sec
Implicit Null Label: Disabled Node-id in RRO : Exclude
P2P Merge Point Ab*: 10 P2MP Merge Point A*: 10
DiffServTE AdmModel: Basic
Percent Link Bw CT0: 100 Percent Link Bw CT4: 0
Percent Link Bw CT1: 0 Percent Link Bw CT5: 0
Percent Link Bw CT2: 0 Percent Link Bw CT6: 0
Percent Link Bw CT3: 0 Percent Link Bw CT7: 0
TE0 -> Class Type : 0 Priority : 0
TE1 -> Class Type : 0 Priority : 1
TE2 -> Class Type : 0 Priority : 2
TE3 -> Class Type : 0 Priority : 3
TE4 -> Class Type : 0 Priority : 4
TE5 -> Class Type : 0 Priority : 5
TE6 -> Class Type : 0 Priority : 6
TE7 -> Class Type : 0 Priority : 7
IgpThresholdUpdate : Disabled
Up Thresholds(%) : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0
Update Timer : N/A
Update on CAC Fail : Disabled
Dark Bandwidth : Enabled DBw Multiplier : 100
DBw Sample Intv : 30 DBw Sample Multp : 3
DBw Up Threshold : 0 %
DBw Down Threshold : 0 %
========================================================================
* indicates that the corresponding row element may have been truncated.
status
Syntax
status
Context
[Tree] (show>router>pcep>pcc status)
Full Context
show router pcep pcc status
Description
This command displays PCEP status information
Platforms
All
Output
The table in the detail parameter (show>router>pcep>pcc detail) describes the status output fields.
Output Example*A:Dut-C>config>router>mpls# show router pcep pcc status
===============================================================================
Path Computation Element Protocol (PCEP) Path Computation Client (PCC) Info
===============================================================================
Admin Status : Up Oper Status : Up
Unknown Msg Limit : 10 msg/min
Keepalive Interval : 30 seconds DeadTimer Interval : 120 seconds
Capabilities List : stateful-delegate stateful-pce segment-rt-path rsvp-
path pce-initiated-lsp
Address : 10.20.1.3
Report Path Constraints: True
Redelegation Interval : 90 seconds
State Interval : 180 seconds State Timer Action : remove
Max SR-TE PCE Init Lsps: 8191
-------------------------------------------------------------------------------
PCEP Path Computation Client (PCC) Peer Info
-------------------------------------------------------------------------------
Peer Admin State/Oper State Oper Keepalive/Oper DeadTimer
-------------------------------------------------------------------------------
10.20.1.24 Up/Up 30/120
-------------------------------------------------------------------------------
===============================================================================
status
Syntax
status
Context
[Tree] (show>router>mpls>forwarding-policies status)
Full Context
show router mpls forwarding-policies status
Description
This command displays MPLS Forwarding status information
Platforms
All
Output
Output fields: MPLS forward policy status describes MPLS forward-policy status output fields.
|
Label |
Description |
|---|---|
|
Reserved label bl |
Specifies the MPLS reserved label block name. |
*A:Dut-B>show>router>mpls# forwarding-policies status
===============================================================================
Forwarding Policy Status
===============================================================================
Admin Status : Up Oper Status : Down
Reserved label bl: reservedlabel!!!blockname32chars
===============================================================================
status
Syntax
status
Context
[Tree] (show>app-assure>group>cflowd status)
Full Context
show application-assurance group cflowd status
Description
This command displays status information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of status information.
Output ExampleA:ALU-A# show application-assurance group 1 status [isa 1/2] cflowd
========================================================================
Application-Assurance Group Cflowd Status
========================================================================
Cflowd Admin Status : Enabled
Cflowd Oper Status : Enabled
------------------------------------------------------------------------
Volume :
------------------------------------------------------------------------
Sample Rate : <Disabled> or <1 in 500 packets>
Active Flows : 23102
Records Reported : 12345
Records Dropped : 10
Records Per Second : 45
Packets Sent : 1763
Packets Sent Per Sec : 7
------------------------------------------------------------------------
TCP Performance :
------------------------------------------------------------------------
Sample Rate : <Disabled> or <1 in 1000 flows>
Active Flows : 32103
Flows Not Allocated : 33
Records Reported : 12345678
Records Dropped : 100
Records Per Second : 456
Packets Sent : 2057613
Packets Sent Per Sec : 76
========================================================================
A:ALU-A#
A:ALU-A#show application-assurance group <aa-group-id:[partition]> cflowd status
========================================================================
Application-Assurance Group:Partition Cflowd Status
========================================================================
------------------------------------------------------------------------
Volume :
------------------------------------------------------------------------
Admin State : Up
Records Reported : 12345
Records Dropped : 10
------------------------------------------------------------------------
TCP Performance :
------------------------------------------------------------------------
Admin State : Up
Flows Not Allocated : 33
Records Reported : 12345678
Records Dropped : 100
========================================================================
A:ALU-A#
status
Syntax
status [isa mda-id] cflowd
status [isa mda-id]
status [isa mda-id] detail
status [isa mda-id] cpu [sample-period seconds]
status [isa mda-id] overload
status {isa mda-id} qos count
status {isa mda-id} qos pools
Context
[Tree] (show>app-assure>group status)
Full Context
show application-assurance group status
Description
This command displays system statistics.
Parameters
- isa mda-id
-
Displays information about the specified AA ISA.
- cflowd
-
Displays cflowd status information.
- detail
-
Displays detailed status information.
- cpu [sample-period seconds]
-
Displays DPU utilization info about the specified AA ISA. The isa mda-id must be specified. The sample period can be specified within a range of 1 5 seconds (default 1s).
- overload
-
Displays the overload status.
- qos count
-
Displays information about queue statistics. The isa mda-id must be specified.
- qos pools
-
Displays information about AA related pool utilization. The isa mda-id must be specified.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of status information.
Output Example*A:Dut-C# show application-assurance group 1 status
==============================================================================
Application-Assurance Status
==============================================================================
Last time change affecting status : 01/25/2018 18:55:08
Number of Active ISAs : 2
Flows : 0
Flow Resources In Use : 0
AA Subs Created : 0
AA Subs Deleted : 0
AA Subs Modified : 0
AA Subs Quarantined : 0
Seen IP Requests Sent : 0
Seen IP Requests Dropped : 0
-------------------------------------------------------------------------------
Current Average Peak
-------------------------------------------------------------------------------
Active Flows : 0 0 0
Flow Setup Rate (per second) : 0 0 0
Traffic Rate (Mbps) : 0 0 0
Packet Rate (per second) : 0 0 0
AA-Subs Downloaded : 0 0 0
Active Subs : 0 0 0
-------------------------------------------------------------------------------
Packets Octets
-------------------------------------------------------------------------------
Diverted traffic : 0 0
Diverted discards : 0 0
Congestion : 0 0
Errors : 0 N/A
Entered ISA-AAs : 0 0
Buffered in ISA-AAs : 0 0
Discarded in ISA-AAs : 0 0
Policy : 0 0
Congestion : 0 0
Errors : 0 0
Modified in ISA-AAs : 0 0
Packet size increased : 0 0
Packet size decreased : 0 0
Errors (policy bypass) : 0 0
Errors (cut-through) : 0 0
Generated in ISA-AAs : 0 0
HTTP Redirect : 0 0
Exited ISA-AAs : 0 0
Returned discards : 0 0
Congestion : 0 0
Errors : 0 N/A
Returned traffic : 0 0
===============================================================================
*A:Dut-C# show application-assurance group 1 status detail
===============================================================================
Application-Assurance Status
===============================================================================
Last time change affecting status : 01/25/2018 18:55:08
Number of Active ISAs : 2
Flows : 0
Flow Resources In Use : 0
AA Subs Created : 0
AA Subs Deleted : 0
AA Subs Modified : 0
Seen IP Requests Sent : 0
Seen IP Requests Dropped : 0
-------------------------------------------------------------------------------
Current Average Peak
-------------------------------------------------------------------------------
Active Flows : 0 0 0
Flow Setup Rate (per second) : 0 0 0
Traffic Rate (Mbps) : 0 0 0
Packet Rate (per second) : 0 0 0
AA-Subs Downloaded : 0 0 0
Active Subs : 0 0 0
-------------------------------------------------------------------------------
from-sub packets from-sub octets
to-sub packets to-sub octets
-------------------------------------------------------------------------------
Diverted traffic : 0 0
0 0
Diverted discards : 0 0
0 0
Congestion : 0 0
0 0
Errors : 0 N/A
0 N/A
Entered ISA-AAs : 0 0
0 0
Buffered in ISA-AAs : 0 0
0 0
Discarded in ISA-AAs : 0 0
0 0
Policy : 0 0
0 0
Congestion : 0 0
0 0
Errors : 0 0
0 0
Modified in ISA-AAs : 0 0
0 0
Packet size increased : 0 0
0 0
Packet size decreased : 0 0
0 0
Errors (policy bypass) : 0 0
0 0
Errors (cut-through) : 0 0
0 0
Generated in ISA-AAs : 0 0
0 0
HTTP Redirect : 0 0
0 0
Exited ISA-AAs : 0 0
0 0
Returned discards : 0 0
0 0
Congestion : 0 0
0 0
Errors : 0 N/A
0 N/A
Returned traffic : 0 0
0 0
===============================================================================
A:ALU>show>app-assure>group#
===============================================================================
Application-Assurance Status
===============================================================================
Last time change affecting status : 09/28/2012 14:19:05
Number of Active ISAs : 1
Flows : 62
Flow Resources In Use : 0
AA-Subs Created : 200
AA-Subs Deleted : 149
AA-Subs Modified : 3
Seen-IP Requests Sent : 0
Seen-IP Requests Dropped : 0
-------------------------------------------------------------------------------
Current Average Peak
-------------------------------------------------------------------------------
Active Flows : 0 0 16
Flow Setup Rate (per second) : 0 0 1
Traffic Rate (Mbps) : 0 0 0
Packet Rate (per second) : 0 0 6
AA-Subs Downloaded : 51 51 51
Active Subs : 0 0 1
show application-assurance group <aa-group-id> status [isa <slot/mda>] overload
===============================================================================
Application Assurance Group 1 overload
===============================================================================
-------------------------------------------------------------------------------
Trap Configuration High Watermark Low Watermark
-------------------------------------------------------------------------------
Flow usage 95% 90%
Flow setup rate (fps) 60000 55000
Bit rate (Mbps) 9000 8500
Packet rate (pps) 12345678901234567890 12345678901234567890
Datapath CPU usage 95% 90%
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
ISA 4/1 Total up-time (s) : 12345678901234567890
TCA Type
Current Level Average Level Peak Level
State Count Duration (s)
-------------------------------------------------------------------------------
Flow resources
75.1% 50.0% 82.8%
cleared 12345678901234567890 12345678901234567890
Flow setup rate
12345678901234567890 12345678901234567890 12345678901234567890
cleared 0 0
Bit rate
11000 5000 12000
raised 1 123456789
Packet rate
1500000 750000 1600000
cleared 2 12345
Datapath CPU usage
15.1% 10.5% 32.1%
cleared 0 0
Management CPU usage
65.2% 50.0% 77.5%
N/A N/A N/A
-------------------------------------------------------------------------------
Overload Trap Configuration High Watermark Low Watermark
-------------------------------------------------------------------------------
From-sub WA buffer depth 80% 75%
To-sub WA buffer depth 80% 75%
-------------------------------------------------------------------------------
Isa-overload-cut-through : enabled
Overload cut-through TCA
Current from-sub WA : 30%
Current to-sub WA : 40%
State : cleared
Count : 3
Duration (s) : 123
===============================================================================
A:ALU>show>app-assure>group# status isa 3/2 qos count
===============================================================================
Application-assurance Queue Statistics for ISA-AA Group: 1, isa 3/2
===============================================================================
-------------------------------------------------------------------------------
Egress From-Subscriber
Queue 1 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out/Exc Prof forwarded: 28940 3767233
Out/Exc Prof dropped : 0 0
Queue 2 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out/Exc Prof forwarded: 0 0
Out/Exc Prof dropped : 0 0
Egress To-Subscriber
Queue 1 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out/Exc Prof forwarded: 44499 53066848
Out/Exc Prof dropped : 0 0
Queue 2 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out/Exc Prof forwarded: 0 0
Out/Exc Prof dropped : 0 0
Ingress From-Subscriber
Queue 1 Packets Octets
In Profile forwarded : 25548 3361023
In Profile dropped : 0 0
Out/Exc Prof forwarded: 1 60
Out/Exc Prof dropped : 0 0
Queue 2 Packets Octets
In Profile forwarded : 2921 365606
In Profile dropped : 0 0
Out/Exc Prof forwarded: 0 0
Out/Exc Prof dropped : 0 0
Queue 9 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out/Exc Prof forwarded: 0 0
Out/Exc Prof dropped : 0 0
Queue 10 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out/Exc Prof forwarded: 0 0
Out/Exc Prof dropped : 0 0
Ingress To-Subscriber
Queue 1 Packets Octets
In Profile forwarded : 39541 46899769
In Profile dropped : 0 0
Out/Exc Prof forwarded: 1 92
Out/Exc Prof dropped : 0 0
Queue 2 Packets Octets
In Profile forwarded : 5050 6291204
In Profile dropped : 0 0
Out/Exc Prof forwarded: 0 0
Out/Exc Prof dropped : 0 0
Queue 9 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out/Exc Prof forwarded: 0 0
Out/Exc Prof dropped : 0 0
Queue 10 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out/Exc Prof forwarded: 0 0
Out/Exc Prof dropped : 0 0
===============================================================================
A:ALU>show>app-assure>group#
*A:ALU>show>app-assure>group# status isa 1/2 qos pools
===============================================================================
Pool Information
===============================================================================
FP : 1
Application : Net-Ing Pool Name : default
CLI Config. Resv CBS : Sum
Resv CBS Step : 0% Resv CBS Max : 0%
Amber Alarm Threshold: 0% Red Alarm Threshold : 0%
-------------------------------------------------------------------------------
Utilization State Start-Avg Max-Avg Max-Prob
-------------------------------------------------------------------------------
HiPlus-Slope Down 85% 100% 80%
High-Slope Down 70% 90% 80%
Low-Slope Down 50% 75% 80%
Exceed-Slope Down 30% 55% 80%
Time Avg Factor : 7
Pool Total : 264192 KB
Pool Shared : 129024 KB Pool Resv : 135168 KB
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Current Resv CBS Provisioned Rising Falling Alarm
%age all Queues Alarm Thd Alarm Thd Color
-------------------------------------------------------------------------------
Sum 134640 KB NA NA Green
Pool Total In Use : 0 KB
Pool Shared In Use : 0 KB Pool Resv In Use : 0 KB
WA Shared In Use : 0 KB
HiPlus-Slope Drop Pr*: 0 Hi-Slope Drop Prob : 0
Lo-Slope Drop Prob : 0 Excd-Slope Drop Prob : 0
===============================================================================
Queue Information
===============================================================================
===============================================================================
Queue : 1 Net=be T=1/*
===============================================================================
FC Map : be
Dest Tap : 1/* Dest FP : 1
Admin PIR : 30000000 Oper PIR : Max
Admin CIR : 0 Oper CIR : 0
Admin FIR : 0 Oper FIR : 0
Admin MBS : 132096 KB Oper MBS : 132096 KB
High-Plus Drop T*: 132096 KB High Drop Tail : 132096 KB
Low Drop Tail : 116736 KB Exceed Drop Tail : 119808 KB
CBS : 132 KB Depth : 0
Slope : not-applicable
===============================================================================
...
===============================================================================
Queue : 16 Net=nc T=31/*
===============================================================================
FC Map : nc
Dest Tap : MCast Dest FP : not-applicable
Admin PIR : 30000000 Oper PIR : Max
Admin CIR : 3000000 Oper CIR : 3000000
Admin FIR : 0 Oper FIR : 0
Admin MBS : 66048 KB Oper MBS : 66048 KB
High-Plus Drop T*: 66048 KB High Drop Tail : 66048 KB
Low Drop Tail : 58368 KB Exceed Drop Tail : 59904 KB
CBS : 2640 KB Depth : 0
Slope : not-applicable
No Matching Entries
===============================================================================
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Pool Information
===============================================================================
Port : 1/2/fm-sub
Application : Net-Egr Pool Name : default
CLI Config. Resv CBS : Sum
Resv CBS Step : 0% Resv CBS Max : 0%
Amber Alarm Threshold: 0% Red Alarm Threshold : 0%
-------------------------------------------------------------------------------
Utilization State Start-Avg Max-Avg Max-Prob
-------------------------------------------------------------------------------
HiPlus-Slope Down 85% 100% 80%
High-Slope Down 70% 90% 80%
Low-Slope Down 50% 75% 80%
Exceed-Slope Down 30% 55% 80%
Time Avg Factor : 7
Pool Total : 116736 KB
Pool Shared : 66048 KB Pool Resv : 50688 KB
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Current Resv CBS Provisioned Rising Falling Alarm
%age all Queues Alarm Thd Alarm Thd Color
-------------------------------------------------------------------------------
Sum 50520 KB NA NA Green
Pool Total In Use : 0 KB
Pool Shared In Use : 0 KB Pool Resv In Use : 0 KB
WA Shared In Use : 0 KB
HiPlus-Slope Drop Pr*: 0 Hi-Slope Drop Prob : 0
Lo-Slope Drop Prob : 0 Excd-Slope Drop Prob : 0
===============================================================================
Queue Information
===============================================================================
===============================================================================
Queue : 1 Net=be Port=1/2/fm-sub
===============================================================================
FC Map : be
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 0 Oper CIR : 0
Admin MBS : 58368 KB Oper MBS : 58368 KB
High-Plus Drop T*: 58368 KB High Drop Tail : 58368 KB
Low Drop Tail : 52224 KB Exceed Drop Tail : 52224 KB
CBS : 1176 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 2 Net=l2 Port=1/2/fm-sub
===============================================================================
FC Map : l2
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 2500000 Oper CIR : 2500000
Admin MBS : 58368 KB Oper MBS : 58368 KB
High-Plus Drop T*: 58368 KB High Drop Tail : 58368 KB
Low Drop Tail : 52224 KB Exceed Drop Tail : 52224 KB
CBS : 3552 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 3 Net=af Port=1/2/fm-sub
===============================================================================
FC Map : af
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 2500000 Oper CIR : 2500000
Admin MBS : 58368 KB Oper MBS : 58368 KB
High-Plus Drop T*: 58368 KB High Drop Tail : 58368 KB
Low Drop Tail : 52224 KB Exceed Drop Tail : 52224 KB
CBS : 11712 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 4 Net=l1 Port=1/2/fm-sub
===============================================================================
FC Map : l1
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 2500000 Oper CIR : 2500000
Admin MBS : 29184 KB Oper MBS : 29184 KB
High-Plus Drop T*: 29184 KB High Drop Tail : 29184 KB
Low Drop Tail : 26112 KB Exceed Drop Tail : 26112 KB
CBS : 3552 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 5 Net=h2 Port=1/2/fm-sub
===============================================================================
FC Map : h2
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 10000000 Oper CIR : Max
Admin MBS : 58368 KB Oper MBS : 58368 KB
High-Plus Drop T*: 58368 KB High Drop Tail : 58368 KB
Low Drop Tail : 52224 KB Exceed Drop Tail : 52224 KB
CBS : 11712 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 6 Net=ef Port=1/2/fm-sub
===============================================================================
FC Map : ef
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 10000000 Oper CIR : Max
Admin MBS : 58368 KB Oper MBS : 58368 KB
High-Plus Drop T*: 58368 KB High Drop Tail : 58368 KB
Low Drop Tail : 52224 KB Exceed Drop Tail : 52224 KB
CBS : 11712 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 7 Net=h1 Port=1/2/fm-sub
===============================================================================
FC Map : h1
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 1000000 Oper CIR : 1000000
Admin MBS : 29184 KB Oper MBS : 29184 KB
High-Plus Drop T*: 29184 KB High Drop Tail : 29184 KB
Low Drop Tail : 26112 KB Exceed Drop Tail : 26112 KB
CBS : 3552 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 8 Net=nc Port=1/2/fm-sub
===============================================================================
FC Map : nc
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 1000000 Oper CIR : 1000000
Admin MBS : 29184 KB Oper MBS : 29184 KB
High-Plus Drop T*: 29184 KB High Drop Tail : 29184 KB
Low Drop Tail : 26112 KB Exceed Drop Tail : 26112 KB
CBS : 3552 KB Depth : 0
Slope : not-applicable
No Matching Entries
===============================================================================
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Pool Information
===============================================================================
Port : 1/2/to-sub
Application : Net-Egr Pool Name : default
CLI Config. Resv CBS : Sum
Resv CBS Step : 0% Resv CBS Max : 0%
Amber Alarm Threshold: 0% Red Alarm Threshold : 0%
-------------------------------------------------------------------------------
Utilization State Start-Avg Max-Avg Max-Prob
-------------------------------------------------------------------------------
HiPlus-Slope Down 85% 100% 80%
High-Slope Down 70% 90% 80%
Low-Slope Down 50% 75% 80%
Exceed-Slope Down 30% 55% 80%
Time Avg Factor : 7
Pool Total : 233472 KB
Pool Shared : 132096 KB Pool Resv : 101376 KB
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Current Resv CBS Provisioned Rising Falling Alarm
%age all Queues Alarm Thd Alarm Thd Color
-------------------------------------------------------------------------------
Sum 101040 KB NA NA Green
Pool Total In Use : 0 KB
Pool Shared In Use : 0 KB Pool Resv In Use : 0 KB
WA Shared In Use : 0 KB
HiPlus-Slope Drop Pr*: 0 Hi-Slope Drop Prob : 0
Lo-Slope Drop Prob : 0 Excd-Slope Drop Prob : 0
===============================================================================
Queue Information
===============================================================================
===============================================================================
Queue : 1 Net=be Port=1/2/to-sub
===============================================================================
FC Map : be
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 0 Oper CIR : 0
Admin MBS : 116736 KB Oper MBS : 116736 KB
High-Plus Drop T*: 116736 KB High Drop Tail : 116736 KB
Low Drop Tail : 104448 KB Exceed Drop Tail : 104448 KB
CBS : 2352 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 2 Net=l2 Port=1/2/to-sub
===============================================================================
FC Map : l2
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 2500000 Oper CIR : 2500000
Admin MBS : 116736 KB Oper MBS : 116736 KB
High-Plus Drop T*: 116736 KB High Drop Tail : 116736 KB
Low Drop Tail : 104448 KB Exceed Drop Tail : 104448 KB
CBS : 7104 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 3 Net=af Port=1/2/to-sub
===============================================================================
FC Map : af
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 2500000 Oper CIR : 2500000
Admin MBS : 116736 KB Oper MBS : 116736 KB
High-Plus Drop T*: 116736 KB High Drop Tail : 116736 KB
Low Drop Tail : 104448 KB Exceed Drop Tail : 104448 KB
CBS : 23424 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 4 Net=l1 Port=1/2/to-sub
===============================================================================
FC Map : l1
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 2500000 Oper CIR : 2500000
Admin MBS : 58368 KB Oper MBS : 58368 KB
High-Plus Drop T*: 58368 KB High Drop Tail : 58368 KB
Low Drop Tail : 52224 KB Exceed Drop Tail : 52224 KB
CBS : 7104 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 5 Net=h2 Port=1/2/to-sub
===============================================================================
FC Map : h2
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 10000000 Oper CIR : Max
Admin MBS : 116736 KB Oper MBS : 116736 KB
High-Plus Drop T*: 116736 KB High Drop Tail : 116736 KB
Low Drop Tail : 104448 KB Exceed Drop Tail : 104448 KB
CBS : 23424 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 6 Net=ef Port=1/2/to-sub
===============================================================================
FC Map : ef
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 10000000 Oper CIR : Max
Admin MBS : 116736 KB Oper MBS : 116736 KB
High-Plus Drop T*: 116736 KB High Drop Tail : 116736 KB
Low Drop Tail : 104448 KB Exceed Drop Tail : 104448 KB
CBS : 23424 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 7 Net=h1 Port=1/2/to-sub
===============================================================================
FC Map : h1
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 1000000 Oper CIR : 1000000
Admin MBS : 58368 KB Oper MBS : 58368 KB
High-Plus Drop T*: 58368 KB High Drop Tail : 58368 KB
Low Drop Tail : 52224 KB Exceed Drop Tail : 52224 KB
CBS : 7104 KB Depth : 0
Slope : not-applicable
===============================================================================
Queue : 8 Net=nc Port=1/2/to-sub
===============================================================================
FC Map : nc
Dest Tap : not-applicable Dest FP : not-applicable
Admin PIR : 10000000 Oper PIR : Max
Admin CIR : 1000000 Oper CIR : 1000000
Admin MBS : 58368 KB Oper MBS : 58368 KB
High-Plus Drop T*: 58368 KB High Drop Tail : 58368 KB
Low Drop Tail : 52224 KB Exceed Drop Tail : 52224 KB
CBS : 7104 KB Depth : 0
Slope : not-applicable
No Matching Entries
===============================================================================
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALU>show>app-assure>group#
status
Syntax
status
Context
[Tree] (show>router>mld status)
Full Context
show router mld status
Description
This command displays MLD status information.
If MLD is not enabled, the following message appears:
A:NYC# show router mld status
MINOR: CLI MLD is not configured.
A:NYC#
Platforms
All
Output
The following output is an example of MLD status information Output fields: MLD status provides MLD status field descriptions.
Output Example*A:ALA-BA# show router mld status
===============================================================================
MLD Status
===============================================================================
Admin State : Up
Oper State : Up
Query Interval : 125
Last Listener Query Interval : 1
Query Response Interval : 10
Robust Count : 2
===============================================================================
*A:ALA-BA#
|
Label |
Description |
|---|---|
|
Admin State |
The administrative status of MLD. |
|
Oper State |
The current operating state of this MLD protocol instance on this router. |
|
Query Interval |
The frequency at which MLD query packets are transmitted. |
|
Last Listener Query Interval |
The maximum response time inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. |
|
Query Response Interval |
The maximum query response time advertised in MLDv2 queries. |
|
Robust Count |
The number of times the router will retry a query. |
status
Syntax
status
Context
[Tree] (show>router>msdp status)
Full Context
show router msdp status
Description
This command displays MSDP status information.
Platforms
All
Output
The following output is an example of MSDP status information, and Output fields: MSDP status describes the output fields.
Output exampleA:node-2# show router msdp status
===============================================================================
MSDP Status
===============================================================================
Admin State : Up
Local Address : None
Global Statistics
Active Src Limit : None
Act Src Lim Excd : 0
Num. Peers : 1
Num. Peers Estab : 1
Num. Source Active : 10
Policies : None
Data Encapsulation : Enabled
Receive Msg Rate
Rate : 0
Time : 0
Threshold : 0
Last Msdp Enabled : 08/30/2002 03:21:43
===============================================================================
A:node-2#
|
Label |
Description |
|---|---|
|
Admin State |
The administrative state |
|
Local Address |
The local IP address |
|
Active Src Limit |
The active source limit |
|
Act Src Lim Excd |
The active source limit which has been exceeded |
|
Number of Peers |
The number of peers |
|
Num. Peers Estab |
The number of peers established |
|
Num. Source Active |
The number of active sources |
|
Policies |
The policy to export source active state from the source active list into MSDP |
|
Data Encapsulation |
The RP using MSDP to encapsulate multicast data received in MSDP register messages inside forwarded MSDP SA messages - enabled or disabled |
|
Rate |
The receive message rate |
|
Time |
The receive message time |
|
Threshold |
The number of MSDP messages that can be processed before the MSDP message rate-limiting function is activated |
|
RPF Table |
The name of the RPF table |
|
Last msdp Enabled |
The time the last MSDP was triggered |
status
Syntax
status [detail] [family]
Context
[Tree] (show>router>pim status)
Full Context
show router pim status
Description
This command displays PIM status. The Oper Status reflects the combined operational status of IPv4 or IPv6 PIM protocol status. If both are down, then Oper Status is reflected as down. If IPv4 or IPv6 reflects up, the Oper Status reflects up.
If PIM is not enabled, the following message appears:
A:NYC# show router pim status
MINOR: CLI PIM is not configured.
A:NYC#
Parameters
- detail
-
Displays detailed status information.
- family
-
Displays status information for the specified family.
Platforms
All
Output
The following output is an example of a PIM status configuration. Output fields: PIM status provides PIM status output field descriptions.
Output ExampleA:dut-d# show router pim status
===============================================================================
PIM Status ipv4
===============================================================================
Admin State : Up
Oper State : Up
IPv4 Admin State : Up
IPv4 Oper State : Up
BSR State : Accept Any
Elected BSR
Address : None
Expiry Time : N/A
Priority : N/A
Hash Mask Length : 30
Up Time : N/A
RPF Intf towards E-BSR : N/A
Candidate BSR
Admin State : Down
Oper State : Down
Address : None
Priority : 0
Hash Mask Length : 30
Candidate RP
Admin State : Down
Oper State : Down
Address : 0.0.0.0
Priority : 192
Holdtime : 150
Auto-RP : Disabled
Multicast-Fast-Failover : Disabled
SSM-Default-Range : Enabled
SSM-Assert-Comp-Mode : Disabled
SSM-Group-Range
None
MC-ECMP-Hashing : Disabled
MC-ECMP-Hashing-Rebalance : Disabled
Enable-MDT-SPT : Disabled
Policy : None
RPF Table : rtable-u
Non-DR-Attract-Traffic : Disabled
Rpf-Vector : None
ESM : Disabled
SSM S,G Scaling (upto 256K) : Enabled (fabric optimization off)
===============================================================================
A:dut-d#
|
Label |
Description |
|---|---|
|
Admin State |
The administrative status of PIM. |
|
Oper State |
The current operating state of this PIM protocol instance. |
|
BSR State |
The state of the router with respect to the Bootstrap mechanism. |
|
Address |
The address of the elected Bootstrap router. |
|
Expiry Time |
The time remaining before the router sends the next Bootstrap message. |
|
Priority |
The priority of the elected Bootstrap router. The higher the value, the higher the priority. |
|
Hash Mask Length |
The hash mask length of the Bootstrap router. |
|
Up Time |
The time since the current E-BSR became the Bootstrap router. |
|
RPF Intf towards |
The RPF interface towards the elected BSR. The value is zero if there is no elected BSR in the network. |
|
Address |
The address of the candidate BSR OS. |
|
Expiry Time |
The time remaining before the router sends the next Bootstrap message. |
|
Auto-RP |
Displays if auto-RP functionality is enabled or disabled. |
|
Priority |
The priority of the Bootstrap router. The higher the value, the higher the priority. |
|
Hash Mask Length |
The hash mask length of the candidate Bootstrap router. |
|
Up Time |
The time since becoming the Bootstrap router. |
|
Admin State |
The administrative status of CRP. |
|
Oper State |
The current operating state of the C-RP mechanism. |
|
Address |
The local RP address. |
|
Priority |
The CRP's priority for becoming a rendezvous point (RP). A 0 value is the highest priority. |
|
Holdtime |
The hold time of the candidate RP. It is used by the Bootstrap router to time out the RP entries if it does not listen to another CRP advertisement within the holdtime period. |
|
Policy |
The PIM policies for a particular PIM instance. |
|
Default Group |
The default core group address. |
|
RPF Table |
The route table used for RPF check. |
|
MC-ECMP-Hashing |
Displays whether hash-based multicast balancing of traffic over ECMP links is enabled or disabled. |
|
SSM S,G Scaling (up to 256K) |
The status of PIM SSM scaling. |
status
Syntax
status
Context
[Tree] (show>router>p2mp-sr-tree status)
Full Context
show router p2mp-sr-tree status
Description
This command displays P2MP SR tree status information.
Platforms
All
Output
The following output is an example of P2MP SR tree status information.
Output ExampleA:swsim103>show>router>p2mp-sr-tree# status
===============================================================================
P2MP-SR-TREE Status
===============================================================================
Admin Status : Up Oper Status : Up
Reserved Lbl Blk : treeSID
===============================================================================
status
Syntax
status
Context
[Tree] (show>li status)
Full Context
show li status
Description
This command displays LI status information.
Platforms
All
Output
The following output is an example of information about the LI status.
Output Example*A:sim138# show li status
===============================================================================
Lawful Intercept Status Information
===============================================================================
LI Booted Config Status : fail
LI Local Save Allowed : yes
Separate LI administration : no
Last LI Config Save Time : N/A
Last Config Save Result : none
Changes Since Last Save : yes
Last LI Config Modified Time : 2008/01/11 10:24:30
===============================================================================
*A:sim138#
status
Syntax
status
Context
[Tree] (show>cflowd status)
Full Context
show cflowd status
Description
This command displays information about the administrative and operational status of cflowd.
Platforms
All
Output
The following output is an example of cflowd status information, and Output fields: cflowd status describes the output fields.
Output exampleA:node-2>config>cflowd# /show cflowd status
===============================================================================
Cflowd Status
===============================================================================
Cflowd Admin Status : Enabled
Cflowd Oper Status : Enabled
Cflowd Export Mode : Automatic
Active Flow Timeout : 30 minutes
Inactive Flow Timeout : 10 seconds
Template Retransmit : 600 seconds
Cache Size : 65536 entries
Overflow : 1%
Aggregation Summary : (Not Specified)
VRtr If Index Context: global
Analyze GRE : Disabled
Analyze L2TPv2 : Disabled
Analyze IPV4overV6 : Disabled
Analyze SRv6 : Disabled
Active Flows : 0
Dropped Flows : 0
Total Pkts Rcvd : 2
Total Pkts Dropped : 0
Total IE315 Pkts Rcvd: 0
Overflow Events : 0
Raw Flow Counts Aggregate Flow Counts
Flows Created 2 0
Flows Matched 0 0
Flows Flushed 2 0
===============================================================================
Sample Profile Info
===============================================================================
Profile Id Sample Rate Slice Selection Export IE315
-------------------------------------------------------------------------------
1 1000 standard Enabled
===============================================================================
Version Info
===============================================================================
Version Status Sent Open Errors
-------------------------------------------------------------------------------
5 Disabled 0 0 0
8 Disabled 0 0 0
9 Disabled 0 0 0
10 Enabled 1 0 0
===============================================================================
|
Label |
Description |
|---|---|
|
Cflowd Admin Status |
The desired administrative state for this cflowd remote collector host |
|
Cflowd Oper Status |
The current operational status of this cflowd remote collector host |
|
Cflowd Export Mode |
The cflowd export mode:
|
|
Active Flow Timeout |
The maximum amount of time, in minutes, before an active flow is exported; if an individual flow is active for this amount of time, the flow is exported and a new flow is created |
|
Inactive Flow Timeout |
The inactive flow timeout in seconds |
|
Template Retransmit |
The time in seconds before template definitions are sent |
|
Cache Size |
The maximum number of active flows to be maintained in the flow cache table |
|
Overflow |
The percentage number of flows to be flushed when the flow cache size has been exceeded |
|
Aggregation Summary |
The aggregation summary |
|
VRtr If Index Context |
Global – indicates the default behavior, which populates the ingress and egress interface ID with the global IF index IDs vrtr – indicates the use-vrtr-if-index command is configured, enabling the export of flow data using interface indexes, which can be used directly as the index into the IF_MIB tables for retrieving interface statistics |
|
Analyze GRE |
Displays whether cflowd analysis of the inner IP packet in a sampled GRE packet that is transiting the local router is enabled or disabled |
|
Analyze L2TPv2 |
Displays whether cflowd looking for and analyzing the inner IP header of an L2TPv2 frame is enabled or disabled |
|
Analyze IPV4overV6 |
Displays whether cflowd looking for and analyzing the inner IPv4 header of IPv4overIPv6 frames that include MAP-E as well as DS-Lite and SAM traffic is enabled or disabled |
|
Analyze SRv6 |
Displays whether cflowd analyzing SRv6 encapsulated packets is enabled or disabled |
|
Sample Rate |
The rate at which traffic is sampled and forwarded for cflowd analysis: one (1) — all packets are analyzed 1000 (default) — every 1000th packet is analyzed |
|
Active Flows |
The current number of active flows being collected |
|
Dropped Flows |
The total number of flows dropped due to cache overflow events |
|
Total Pkts Rcvd |
The total number of packets sampled and forwarded for cflowd analysis |
|
Total Pkts Dropped |
The total number of packets dropped |
|
Total IE315 Pkts Rcvd |
The total number of IE315 packets received |
|
Overflow Events |
The number of times the active cache overflowed |
|
Raw Flow Counts |
The raw flow counts |
|
Aggregate Flow Counts |
The aggregate flow counts |
|
Flows Created |
The flows created |
|
Flows Matched |
The flows matched |
|
Flows Flushed |
The flows flushed |
|
Sample Profile Info |
|
|
Profile Id |
The profile ID associated with the sample profile |
|
Sample Rate |
The cflowd sampling rate for the sample profile ID |
|
Slice selection |
The slice selection for this sample profile:
|
|
Export IE315 |
Displays if export IE315 is enabled. When enabled, samples are sent to the IPFIX collector using the IPFIX IE315 fields. |
|
Version Info: |
|
|
Type |
The type of data to be aggregated and to the collector |
|
Version |
The cflowd version:
|
|
Status |
Enabled — specifies that the aggregation type is enabled Disabled — specifies that the aggregation type is disabled |
|
Sent |
The number of packets with flow date sent to the associated collector |
|
Open |
This counter shows the number of partially filled packets which have some flow data but are not yet filled or have been timed out (60 seconds maximum) |
|
Errors |
This counter increments when there was an error during exporting of the collector packet; the most common reason will be a UDP unreachable destination for the configured collector |
status
Syntax
status
Context
[Tree] (show>router status)
Full Context
show router status
Description
This command displays the router status.
Platforms
All
Output
Router Status Output — The following output is an example of router status information.
There are multiple instances of OSPF. OSPF-0 is persistent. OSPF-1 through OSPF-31 are present when that specific OSPF instance is configured.
Output Example*A:Dut-C# show router status
===============================================================================
Router Status (Router: Base)
===============================================================================
Admin State Oper State
-------------------------------------------------------------------------------
Router Up Up
OSPFv2 Not configured Not configured
RIP Not configured Not configured
RIP-NG Not configured Not configured
ISIS-0 Up Up
MPLS Up Up
RSVP Up Up
LDP Not configured Not configured
BGP Not configured Not configured
IGMP Not configured Not configured
MLD Not configured Not configured
PIM Not configured Not configured
PIMv4 Not configured Not configured
PIMv6 Not configured Not configured
OSPFv3 Not configured Not configured
MSDP Not configured Not configured
BIER Not configured Not configured
Max IPv4 Routes No Limit
Max IPv6 Routes No Limit
Total IPv4 Routes 27
Total IPv6 Routes 27
Max Multicast Routes No Limit
Total IPv4 Mcast Routes PIM not configured
Total IPv6 Mcast Routes PIM not configured
ECMP Max Routes 64
Weighted ECMP Strict
Mcast Info Policy default
Triggered Policies No
Policy reference checks Disabled
LDP Shortcut Disabled
Single SFM Overload Disabled
IP Fast Reroute Disabled
Entropy Label Disabled
ICMP Tunneling Disabled
MSS adjust ISA group Not configured
Reassembly ISA-BB group Not configured
Ipv6 Nbr Reachab. time Not configured 30
IPv6 Nbr stale time (s) 14400
Static Route Hold Down Disabled
TTL Propagate
VPRN Local vc-only
VPRN Transit vc-only
Label Route Local none
Label Route Transit none
LSR Label Route none
LSP BFD Tail Sessions Disabled
Class Forwarding Disabled
Mtrace2 Tests Disabled
Leak Export Disabled
Leak Export Limit 5
===============================================================================
*A:Dut-C#
Router Status Output —The following output is an example of router status information with Mtrace2 enabled.
Output Example===============================================================================
Router Status (Router: Base)
===============================================================================
Admin State Oper State
-------------------------------------------------------------------------------
Router Up Up
OSPFv2 Not configured Not configured
RIP Not configured Not configured
RIP-NG Not configured Not configured
ISIS Not configured Not configured
MPLS Not configured Not configured
RSVP Not configured Not configured
LDP Not configured Not configured
BGP Not configured Not configured
IGMP Not configured Not configured
MLD Not configured Not configured
PIM Not configured Not configured
PIMv4 Not configured Not configured
PIMv6 Not configured Not configured
OSPFv3 Not configured Not configured
MSDP Not configured Not configured
Max IPv4 Routes No Limit
Max IPv6 Routes No Limit
Total IPv4 Routes 0
Total IPv6 Routes 0
Max Multicast Routes No Limit
Total IPv4 Mcast Routes PIM not configured
Total IPv6 Mcast Routes PIM not configured
ECMP Max Routes ECMP not configured
Weighted ECMP Disabled
Mcast Info Policy default
Triggered Policies No
LDP Shortcut Disabled
Single SFM Overload Disabled
IP Fast Reroute Disabled
Entropy Label Disabled
ICMP Tunneling Disabled
MSS adjust ISA group Not configured
Reassembly ISA-BB group Not configured
Ipv6 Nbr Reachab. time Not configured 30
IPv6 Nbr stale time (s) 14400
Static Route Hold Down Disabled
TTL Propagate
VPRN Local vc-only
VPRN Transit vc-only
Label Route Local none
Label Route Transit none
LSR Label Route none
LSP BFD Tail Sessions Disabled
Class Forwarding Disabled
Mtrace2 Tests Enabled on UDP PORT 5001
7450 ESS Router Status Output—The following output is an example of router status information for the 7450 ESS:
Output Example
*A:Performance# configure router ospf [1..31] shutdown
*A:Performance# show router status
================================================================
Router Status (Router: Base)
================================================================
Admin State Oper State
----------------------------------------------------------------
Router Up Up
OSPFv2-0 Up Up
OSPFv2-1 Down Down
OSPFv2-2 Down Down
OSPFv2-3 Down Down
OSPFv2-4 Down Down
OSPFv2-5 Down Down
OSPFv2-6 Down Down
OSPFv2-7 Down Down
OSPFv2-8 Down Down
OSPFv2-9 Down Down
OSPFv2-10 Down Down
OSPFv2-11 Down Down
OSPFv2-12 Down Down
OSPFv2-13 Down Down
OSPFv2-14 Down Down
OSPFv2-15 Down Down
OSPFv2-16 Down Down
OSPFv2-17 Down Down
OSPFv2-18 Down Down
OSPFv2-19 Down Down
OSPFv2-20 Down Down
OSPFv2-21 Down Down
OSPFv2-22 Down Down
OSPFv2-23 Down Down
OSPFv2-24 Down Down
OSPFv2-25 Down Down
OSPFv2-26 Down Down
OSPFv2-27 Down Down
OSPFv2-28 Down Down
OSPFv2-29 Down Down
OSPFv2-30 Down Down
OSPFv2-31 Down Down
RIP Up Up
ISIS Up Up
MPLS Not configured Not configured
RSVP Not configured Not configured
LDP Not configured Not configured
BGP Up Up
IGMP Not configured Not configured
PIM Not configured Not configured
OSPFv3 Not configured Not configured
MSDP Not configured Not configured
Max Routes No Limit
Total IPv4 Routes 244277
Max Multicast Routes No Limit
Total Multicast Routes PIM not configured
ECMP Max Routes 1
Single SFM Overload Enabled hold-off 30 sec
Single SFM State normal
Single SFM Start 004 19:03:39.680
Single SFM Interval 0d 00:16:06
Reassembly ISA-BB group Not configured
Ipv6 Nbr Reachab. time Not configured 30
Triggered Policies No
================================================================
*A:Performance#
Router Status Output for 7750 SR and 7950 XRS—The following output is an example of router status information for the 7750 SR and 7950 XRS:
Output Example*A:Performance# configure router ospf [1..31] shutdown
*A:Performance# show router status
================================================================
Router Status (Router: Base)
================================================================
Admin State Oper State
----------------------------------------------------------------
Router Up Up
OSPFv2-0 Up Up
OSPFv2-1 Down Down
OSPFv2-2 Down Down
OSPFv2-3 Down Down
OSPFv2-4 Down Down
OSPFv2-5 Down Down
OSPFv2-6 Down Down
OSPFv2-7 Down Down
OSPFv2-8 Down Down
OSPFv2-9 Down Down
OSPFv2-10 Down Down
OSPFv2-11 Down Down
OSPFv2-12 Down Down
OSPFv2-13 Down Down
OSPFv2-14 Down Down
OSPFv2-15 Down Down
OSPFv2-16 Down Down
OSPFv2-17 Down Down
OSPFv2-18 Down Down
OSPFv2-19 Down Down
OSPFv2-20 Down Down
OSPFv2-21 Down Down
OSPFv2-22 Down Down
OSPFv2-23 Down Down
OSPFv2-24 Down Down
OSPFv2-25 Down Down
OSPFv2-26 Down Down
OSPFv2-27 Down Down
OSPFv2-28 Down Down
OSPFv2-29 Down Down
OSPFv2-30 Down Down
OSPFv2-31 Down Down
RIP Up Up
ISIS Up Up
MPLS Not configured Not configured
RSVP Not configured Not configured
LDP Not configured Not configured
BGP Up Up
IGMP Not configured Not configured
PIM Not configured Not configured
OSPFv3 Not configured Not configured
MSDP Not configured Not configured
Max Routes No Limit
Total IPv4 Routes 244277
Total IPv6 Routes 0
Max Multicast Routes No Limit
Total Multicast Routes PIM not configured
ECMP Max Routes 1
Single SFM Overload Enabled hold-off 30 sec
Single SFM State normal
Single SFM Start 004 19:03:39.680
Single SFM Interval 0d 00:16:06
Reassembly ISA-BB group Not configured
Ipv6 Nbr Reachab. time Not configured 30
Triggered Policies No
================================================================
*A:Performance#
Class Forwarding—The following output is an example for checking if class-based forwarding is enabled in the global router context.
Output Example*A:Dut-B>show>router# show router "Base" status
===============================================================================
Router Status (Router: Base)
===============================================================================
Admin State Oper State
-------------------------------------------------------------------------------
Router Up Up
OSPFv2 Not configured Not configured
RIP Not configured Not configured
RIP-NG Not configured Not configured
ISIS-0 Up Up
MPLS Up Up
RSVP Up Up
LDP Not configured Not configured
BGP Up Up
IGMP Not configured Not configured
MLD Not configured Not configured
PIM Not configured Not configured
PIMv4 Not configured Not configured
PIMv6 Not configured Not configured
OSPFv3 Not configured Not configured
MSDP Not configured Not configured
Max IPv4 Routes No Limit
Max IPv6 Routes No Limit
Total IPv4 Routes 262
Total IPv6 Routes 262
Max Multicast Routes No Limit
Total IPv4 Mcast Routes PIM not configured
Total IPv6 Mcast Routes PIM not configured
ECMP Max Routes 64
Weighted ECMP Disabled
Mcast Info Policy default
Triggered Policies No
LDP Shortcut Disabled
Single SFM Overload Disabled
IP Fast Reroute Disabled
Entropy Label Disabled
ICMP Tunneling Enabled
MSS adjust ISA group Not configured
Reassembly ISA-BB group Not configured
Ipv6 Nbr Reachab. time Not configured 30
IPv6 Nbr stale time (s) 14400
Static Route Hold Down Disabled
TTL Propagate
VPRN Local vc-only
VPRN Transit vc-only
Label Route Local none
Label Route Transit none
LSR Label Route none
LSP BFD Tail Sessions Disabled
Class Forwarding Enabled
===============================================================================
TTL Propagation and ICMP Tunneling—The following output is an example of TTL propagation and ICMP tunneling configurations, first in base router and then in a VPRN service.
Output Example*A:Performance# show router status
================================================================
Router Status (Router: Base)
================================================================
Admin State Oper State
----------------------------------------------------------------
Router Up Up
OSPFv2-0 Up Up
OSPFv2-2 Down Down
RIP Not configured Not configured
RIP-NG Not configured Not configured
ISIS-0 Up Up
ISIS-1024 Down Down
MPLS Down Down
RSVP Down Down
LDP Up Down
BGP Up Down
IGMP
MLD
PIM
PIMv4
PIMv6
OSPFv3
MSDP
Max IPv4 Routes No Limit
Max IPv6 Routes No Limit
Total IPv4 Routes 0
Total IPv6 Routes 0
Max Multicast Routes No Limit
Total IPv4 Mcast Routes PIM not configured
Total IPv6 Mcast Routes PIM not configured
ECMP Max Routes 1
Mcast Info Policy default
Triggered Policies No
LDP Shortcut Disabled
Single SFM Overload Disabled
IP Fast Reroute Disabled
ICMP Tunneling Disabled
Reassembly ISA-BB group Not configured
ICMP Tunneling Disabled
Ipv6 Nbr Reachab. time Not configured 30
IPv6 Nbr stale time (s) 14400
VPRN Local TTL Propagate vc-only
VPRN Transit TTL Propag* vc-only
Label Route Local TTL P* none
Label Route Transit TTL* none
LSR Label Route TTL Pro* none
===============================================================================
* indicates that the corresponding row element may have been truncated.
*B:bkvm31#
VPRN TTL Propagation and ICMP Tunneling—The following output is an example of TTL propagation and ICMP tunneling configurations in a VPRN service. The TTL propagation has been specified as local and all for VPRN service 5001.
Output Example
*A:Dut-A# configure service vprn 5001 ttl-propagate local all
*A:Dut-A# show router 5001 status
===============================================================================
Router Status (Service: 5001)
===============================================================================
Admin State Oper State
-------------------------------------------------------------------------------
Router Up Up
OSPFv2 Not configured Not configured
RIP Not configured Not configured
RIP-NG Not configured Not configured
ISIS Not configured Not configured
MPLS Not configured Not configured
RSVP Not configured Not configured
LDP Not configured Not configured
BGP Not configured Not configured
IGMP Not configured Not configured
MLD Not configured Not configured
PIM Not configured Not configured
PIMv4 Not configured Not configured
PIMv6 Not configured Not configured
OSPFv3 Not configured Not configured
MSDP Not configured Not configured
Max IPv4 Routes No Limit
Max IPv6 Routes No Limit
Total IPv4 Routes 2
Total IPv6 Routes 2
Max Multicast Routes No Limit
Total IPv4 Mcast Routes PIM not configured
Total IPv6 Mcast Routes PIM not configured
ECMP Max Routes 1
Mcast Info Policy default
Triggered Policies No
GRT Lookup Disabled
Local Management Disabled
Single SFM Overload Disabled
IP Fast Reroute Disabled
ICMP Tunneling Disabled
Reassembly ISA-BB group Not configured
ICMP Tunneling Disabled
Ipv6 Nbr Reachab. time Not configured 30
VPRN Local TTL Propagate all
VPRN Transit TTL Propag* inherit (vc-only)
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-A#
status
Syntax
status
Context
[Tree] (show>router>rib-api status)
Full Context
show router rib-api status
Description
This command displays RIB-API status information.
Platforms
All
Output
The following output is an example of RIB-API status information.
Output Example*A:Dut-A# /show router rib-api status
===============================================================================
Rib-Api Status
===============================================================================
MPLS Admin Reserved Label Block Name
Status
-------------------------------------------------------------------------------
Up ribapi
===============================================================================
status
Syntax
status
Context
[Tree] (clear>application-assurance>group status)
Full Context
clear application-assurance group status
Description
This command clears application assurance system statistics.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
status
Syntax
status
Context
[Tree] (show>router>isis status)
Full Context
show router isis status
Description
This command displays the IS-IS status information.
Platforms
All
Output
The following output is an example of the IS-IS status that shows Unreachable Prefix Announcement (UPA) configuration properties, and Output fields: IS-IS status describes the output fields.
Output example
A:node-2# show router isis status
===============================================================================
Rtr Base ISIS Instance 0 Status
===============================================================================
ISIS Cfg System Id : 0000.0000.0000
...
Micro loop avoidance : Disabled fib-delay 15
UPA Received Processing : Disabled
UPA Lifetime : 180
UPA Metric : 4261412865
UPA Max Number Advertised : 32
===============================================================================The following output is an example of the IS-IS status, and Output fields: IS-IS status describes the output fields.
Output exampleA:node-2# show router isis status
===============================================================================
Rtr Base ISIS Instance 0 Status
===============================================================================
ISIS Cfg System Id : 0000.0000.0000
ISIS Oper System Id : 0100.2000.1001
ISIS Cfg Router Id : 0.0.0.0
ISIS Oper Router Id : 10.20.1.1
ISIS Cfg IPv6 Router Id : ::
ISIS Oper IPv6 Router Id : ::
ASN : 0
Admin State : Up
Oper State : Up
Ipv4 Routing : Enabled
Ipv6 Routing : Disabled
Mcast Ipv4 Routing : Enabled, Native
Mcast Ipv6 Routing : Disabled
Last Enabled : 12/09/2022 18:43:43
Level Capability : L1L2
Authentication Check : True
Auth Keychain : Disabled
Authentication Type : None
CSNP-Authentication : Enabled
HELLO-Authentication : Enabled
PSNP-Authentication : Enabled
Traffic Engineering : Disabled
Oper IPv6 TE Router Id : ::
Graceful Restart : Disabled
GR Helper Mode : Disabled
Overload-On-Boot Timeout : 0
Overload Max-Metric : False
Overload-On-Boot Max-Metric : False
Overload Include Locators : Disabled
Ovl Export Interlevel : Disabled
Ovl Export External : Disabled
Ovl FIB Error Notify Only : Disabled
Ovl FIB Error Retry : N.A.
LSP Lifetime : 1200
LSP Min Remaining Lifetime : N.A.
LSP Refresh Half Interval : 600 (Config) 600 (Oper)
LSP Wait (ms) : 5000 (Max) 10 (Initial) 1000 (Second)
LSP MTU Size : 1492 (Config)
L1 LSP MTU Size : 1492 (Config) 1492 (Oper)
L2 LSP MTU Size : 1492 (Config) 1492 (Oper)
L1 MAX LSP MTU Size : 9187
L2 MAX LSP MTU Size : 1497
Adjacency Check : loose
L1 Auth Keychain : Disabled
L1 Auth Type : none
L1 CSNP-Authentication : Enabled
L1 HELLO-Authentication : Enabled
L1 PSNP-Authentication : Enabled
L1 Preference : 15
L1 Ext. Preference : 160
L1 Wide Metrics : Disabled
L1 LSDB Overload : Disabled
L1 LSPs : 1
L1 Default Metric : 10
L1 IPv6 Def Metric : 10
L1 Mcast IPv4 Def Metric : 10
L1 Mcast IPv6 Def Metric : 10
L1 Adv Router Cap : Enabled
L1 Bier Template : None, Disabled
L1 Total Exp Routes : 0
All-L1-MacAddr (Cfg) : 01:80:c2:00:00:14
Last SPF : 12/09/2022 18:43:43
SPF Wait (ms) : 10000 (Max) 1000 (Initial) 1000 (Second)
Multi-topology : Disabled
IPv6-Unicast MT2 : Disabled
IPv4-Multicast MT3 : Disabled
IPv6-Multicast MT4 : Disabled
Area Addresses : 30.31
Standard Multi-Instance : Disabled
IID TLV : Disabled
Prefix Attributes TLV : Disabled
L2 Auth Keychain : Disabled
L2 Auth Type : none
L2 CSNP-Authentication : Enabled
L2 HELLO-Authentication : Enabled
L2 PSNP-Authentication : Enabled
L2 Preference : 18
L2 Ext. Preference : 165
L2 Wide Metrics : Enabled
L2 LSDB Overload : Disabled
L2 LSPs : 6
L2 Default Metric : 10
L2 IPv6 Def Metric : 10
L2 Mcast IPv4 Def Metric : 10
L2 Mcast IPv6 Def Metric : 10
L2 Adv Router Cap : Enabled
L2 Bier Template : None, Disabled
L2 Total Exp Routes : 0
All-L2-MacAddr (Cfg) : 01:80:c2:00:00:15
Export Policies : None
Import Policies : None
LFA Policies : None
Multicast Import : None
Advertise-Passive-Only : Disabled
Ignore Attached Bit : Disabled
Suppress Attached Bit : Disabled
Default Route Tag : None
Rib Prio List High : None
Rib Prio Tag High : None
Ldp Sync Admin State : Up
LDP-over-RSVP : Disabled
IGP-Shortcut : Disabled
IGP SC Allow SR over SR-TE : Disabled
IPv4 IGP SC Tunn-Nhop : Res-Disabled
IPv6 IGP SC Tunn-Nhop : Res-Disabled
SRv4 IGP SC Tunn-Nhop : Res-Disabled
SRv6 IGP SC Tunn-Nhop : Res-Disabled
Advertise-Tunnel-Link : Disabled
Export Limit : 0
Exp Lmt Log Percent : 0
Loopfree-Alternate : Disabled
Remote-LFA : Disabled
Max PQ Cost : 4261412864
Remote-LFA (node-protect) : Disabled
Max PQ nodes (node-protect) : 16
Augment-route-table : Disabled
TI-LFA : Disabled
Max SR FRR Labels : 2
TI-LFA (node-protect) : Disabled
L1 LFA : Included
L2 LFA : Included
Advertise Router Cap : Disabled
Hello Padding : Disabled
L1 Hello Padding : Disabled
L2 Hello Padding : Disabled
Ignore Lsp Errors : Disabled
Ignore Narrow Metric : Disabled
Reference Bandwidth : 0
Ucast Import Disable : None
Segment Routing : Disabled
Segment Routing MT2 : Disabled
Flex Algo : Down
Mapping Server : Disabled
Purge Originator Id : Disabled
Class Based Forwarding : Disabled
Entropy Label : Enabled
Override ELC : Enabled
Micro loop avoidance : Disabled fib-delay 15
UPA Received Processing : Disabled
UPA Lifetime : 180
UPA Metric : 4261412865
UPA Max Number Advertised : 32
===============================================================================The following output is an example of the LFA policies configured in the configure router isis, and Output fields: IS-IS status describes the output fields.
Output example
A:node-2# show router isis status
===============================================================================
Rtr Base ISIS Instance 0 Status
===============================================================================
ISIS Cfg System Id : 0000.C0A8.0001
ISIS Oper System Id : 0100.C0A8.1001
ISIS Cfg Router Id : 0.0.0.0
ISIS Oper Router Id : 10.20.1.3
ISIS Cfg IPv6 Router Id : ::
ISIS Oper IPv6 Router Id : ::
ASN : 0
Admin State : Up
Oper State : Up
Ipv4 Routing : Enabled
Ipv6 Routing : Disabled
Mcast Ipv4 Routing : Enabled, Native
Mcast Ipv6 Routing : Disabled
Last Enabled : 12/09/2022 18:43:43
Level Capability : L1
Authentication Check : True
Auth Keychain : Disabled
Authentication Type : None
CSNP-Authentication : Enabled
HELLO-Authentication : Enabled
PSNP-Authentication : Enabled
Traffic Engineering : Disabled
Oper IPv6 TE Router Id : ::
Graceful Restart : Disabled
GR Helper Mode : Disabled
Overload-On-Boot Timeout : 0
Overload Max-Metric : False
Overload-On-Boot Max-Metric : False
Overload Include Locators : Disabled
Ovl Export Interlevel : Disabled
Ovl Export External : Disabled
Ovl FIB Error Notify Only : Disabled
Ovl FIB Error Retry : N.A.
LSP Lifetime : 1200
LSP Min Remaining Lifetime : N.A.
LSP Refresh Half Interval : 600 (Config) 600 (Oper)
LSP Wait (ms) : 5 (Max) 0 (Initial) 1 (Second)
LSP MTU Size : 1492 (Config)
L1 LSP MTU Size : 1492 (Config) 1492 (Oper)
L2 LSP MTU Size : 1492 (Config) 1492 (Oper)
L1 MAX LSP MTU Size : 9187
L2 MAX LSP MTU Size : 1497
Adjacency Check : loose
L1 Auth Keychain : Disabled
L1 Auth Type : none
L1 CSNP-Authentication : Enabled
L1 HELLO-Authentication : Enabled
L1 PSNP-Authentication : Enabled
L1 Preference : 15
L1 Ext. Preference : 160
L1 Wide Metrics : Enabled
L1 LSDB Overload : Disabled
L1 LSPs : 51
L1 Default Metric : 10
L1 IPv6 Def Metric : 10
L1 Mcast IPv4 Def Metric : 10
L1 Mcast IPv6 Def Metric : 10
L1 Adv Router Cap : Enabled
L1 Bier Template : None, Disabled
L1 Total Exp Routes : 1
All-L1-MacAddr (Cfg) : 01:80:c2:00:00:14
Last SPF : 12/09/2022 18:43:43
SPF Wait (ms) : 10 sec (Max) 1000 ms (Initial) 1000 ms (Second)
Multi-topology : Disabled
IPv6-Unicast MT2 : Disabled
IPv4-Multicast MT3 : Disabled
IPv6-Multicast MT4 : Disabled
Area Addresses : 49.0001
Standard Multi-Instance : Disabled
IID TLV : Disabled
Prefix Attributes TLV : Disabled
L2 Auth Keychain : Disabled
L2 Auth Type : none
L2 CSNP-Authentication : Enabled
L2 HELLO-Authentication : Enabled
L2 PSNP-Authentication : Enabled
L2 Preference : 18
L2 Ext. Preference : 165
L2 Wide Metrics : Disabled
L2 LSDB Overload : Disabled
L2 LSPs : 0
L2 Default Metric : 10
L2 IPv6 Def Metric : 10
L2 Mcast IPv4 Def Metric : 10
L2 Mcast IPv6 Def Metric : 10
L2 Adv Router Cap : Enabled
L2 Bier Template : None, Disabled
L2 Total Exp Routes : 0
All-L2-MacAddr (Cfg) : 01:80:c2:00:00:15
Export Policies : static
Import Policies : None
LFA Policies : pol1
: pol2
: pol3
: pol4
: pol5
Multicast Import : None
Advertise-Passive-Only : Disabled
Ignore Attached Bit : Disabled
Suppress Attached Bit : Disabled
Default Route Tag : None
Rib Prio List High : None
Rib Prio Tag High : None
Ldp Sync Admin State : Up
LDP-over-RSVP : Disabled
IGP-Shortcut : Disabled
IGP SC Allow SR over SR-TE : Disabled
IPv4 IGP SC Tunn-Nhop : Res-Disabled
IPv6 IGP SC Tunn-Nhop : Res-Disabled
SRv4 IGP SC Tunn-Nhop : Res-Disabled
SRv6 IGP SC Tunn-Nhop : Res-Disabled
Advertise-Tunnel-Link : Disabled
Export Limit : 0
Exp Lmt Log Percent : 0
Loopfree-Alternate : Enabled
Remote-LFA : Disabled
Max PQ Cost : 4261412864
Remote-LFA (node-protect) : Disabled
Max PQ nodes (node-protect) : 16
Augment-route-table : Disabled
TI-LFA : Disabled
Max SR FRR Labels : 2
TI-LFA (node-protect) : Disabled
L1 LFA : Included
L2 LFA : Included
Advertise Router Cap : Disabled
Hello Padding : Disabled
L1 Hello Padding : Disabled
L2 Hello Padding : Disabled
Ignore Lsp Errors : Disabled
Ignore Narrow Metric : Disabled
Reference Bandwidth : 0
Ucast Import Disable : None
Segment Routing : Disabled
Segment Routing MT2 : Disabled
Flex Algo : Down
Mapping Server : Disabled
Purge Originator Id : Disabled
Class Based Forwarding : Disabled
Entropy Label : Enabled
Override ELC : Enabled
Micro loop avoidance : Disabled fib-delay 15
UPA Received Processing : Disabled
UPA Lifetime : 180
UPA Metric : 4261412865
UPA Max Number Advertised : 32
===============================================================================The following output is an example of the detailed LFA policies configured in the configure router isis context.
Output example
A:node-2# show router isis interface "DUTC_TO_DUTE.1.0" detail
===============================================================================
Rtr Base ISIS Instance 0 Interfaces (detail)
===============================================================================
-------------------------------------------------------------------------------
Interface : DUTC_TO_DUTE.1.0 Level Capability: L1L2
Oper State : Up Admin State : Up
Auth Keychain : Disabled
Auth Type : None Auth State : Enabled
Circuit Id : 3 Retransmit Int. : 5
Type : Broadcast LSP Pacing Int. : 100
Oper Type : Broadcast CSNP Int. : 10
Mesh Group : Inactive BER : none
LFA NH Template : "template1" Bfd Enabled : No
Topology : IPv4-Unicast, IPv6-Unicast, IPv4-Multicast, IPv6-Multicast
Te Metric : 0 Te State : Down
Admin Groups : None
Ldp Sync : outOfService Ldp Sync Wait : Disabled
Ldp Timer State : Disabled Ldp Tm Left : 0
Route Tag : None LFA : Included
Level : 1 Adjacencies : 0
Desg. IS : Dut-C
Auth Keychain : Disabled
Auth Type : None Metric : 10
Hello Timer : 9 IPv6-Ucast-Met : 10
Priority : 64 IPv6-Mcast-Met : 10
Passive : No IPv4-Mcast-Met : 10
SD-Offset : 0 SF-Offset : 0
Hello Mult. : 3
Level : 2 Adjacencies : 0
Desg. IS : Dut-C
Auth Keychain : Disabled
Auth Type : None Metric : 10
Hello Timer : 9 IPv6-Ucast-Met : 10
Priority : 64 IPv6-Mcast-Met : 10
Passive : No IPv4-Mcast-Met : 10
SD-Offset : 0 SF-Offset : 0
Hello Mult. : 3
===============================================================================The following output is an example of the output with flexible algorithms enabled, and Output fields: IS-IS status describes the output fields.
Output Example
A:node-2# show router isis 0 status
===============================================================================
Rtr Base ISIS Instance 0 Status
===============================================================================
ISIS Cfg System Id : 4900.0000.0001
ISIS Oper System Id : 4900.0000.0001
ISIS Cfg Router Id : 10.20.1.1
ISIS Oper Router Id : 10.20.1.1
ISIS Cfg IPv6 Router Id : ::
ISIS Oper IPv6 Router Id : ::
ASN : 0
Admin State : Up
Oper State : Up
Ipv4 Routing : Enabled
Ipv6 Routing : Disabled
Mcast Ipv4 Routing : Enabled, Native
Mcast Ipv6 Routing : Disabled
Last Enabled : 05/28/2020 13:17:48
Level Capability : L1L2
Authentication Check : True
Auth Keychain : MyKeyChain
Authentication Type : None
CSNP-Authentication : Enabled
HELLO-Authentication : Enabled
PSNP-Authentication : Enabled
Traffic Engineering : Disabled
Oper IPv6 TE Router Id : ::
Graceful Restart : Disabled
GR Helper Mode : Disabled
Overload-On-Boot Timeout : 0
Overload Max-Metric : False
Overload-On-Boot Max-Metric : False
Overload Include Locators : Disabled
Ovl Export Interlevel : Disabled
Ovl Export External : Disabled
Ovl FIB Error Notify Only : Disabled
Ovl FIB Error Retry : N.A.
LSP Lifetime : 1200
LSP Min Remaining Lifetime : N.A.
LSP Refresh Half Interval : 600 (Config) 600 (Oper)
LSP Wait (ms) : 5000 (Max) 10 (Initial) 1000 (Second)
LSP MTU Size : 1492 (Config)
L1 LSP MTU Size : 1492 (Config) 1492 (Oper)
L2 LSP MTU Size : 1492 (Config) 1492 (Oper)
L1 MAX LSP MTU Size : 9775
L2 MAX LSP MTU Size : 1561
Adjacency Check : loose
L1 Auth Keychain : Disabled
L1 Auth Type : none
L1 CSNP-Authentication : Enabled
L1 HELLO-Authentication : Enabled
L1 PSNP-Authentication : Enabled
L1 Preference : 15
L1 Ext. Preference : 160
L1 Wide Metrics : Enabled
L1 LSDB Overload : Disabled
L1 LSPs : 1
L1 Default Metric : 10
L1 IPv6 Def Metric : 10
L1 Mcast IPv4 Def Metric : 10
L1 Mcast IPv6 Def Metric : 10
L1 Adv Router Cap : Enabled
L1 Bier Template : None, Disabled
L1 Total Exp Routes : 0
All-L1-MacAddr (Cfg) : 01:80:c2:00:00:14
Last SPF : 06/03/2020 10:27:06
SPF Wait (ms) : 10000 (Max) 1000 (Initial) 1000 (Second)
Multi-topology : Disabled
IPv6-Unicast MT2 : Disabled
IPv4-Multicast MT3 : Disabled
IPv6-Multicast MT4 : Disabled
Area Addresses : 49.0001
Standard Multi-Instance : Disabled
IID TLV : Disabled
Prefix Attributes TLV : Disabled
L2 Auth Keychain : Disabled
L2 Auth Type : none
L2 CSNP-Authentication : Enabled
L2 HELLO-Authentication : Enabled
L2 PSNP-Authentication : Enabled
L2 Preference : 18
L2 Ext. Preference : 165
L2 Wide Metrics : Enabled
L2 LSDB Overload : Disabled
L2 LSPs : 3
L2 Default Metric : 10
L2 IPv6 Def Metric : 10
L2 Mcast IPv4 Def Metric : 10
L2 Mcast IPv6 Def Metric : 10
L2 Adv Router Cap : Enabled
L2 Bier Template : None, Disabled
L2 Total Exp Routes : 0
All-L2-MacAddr (Cfg) : 01:80:c2:00:00:15
Export Policies : None
Import Policies : None
LFA Policies : None
Multicast Import : None
Advertise-Passive-Only : Disabled
Ignore Attached Bit : Disabled
Suppress Attached Bit : Disabled
Default Route Tag : None
Rib Prio List High : None
Rib Prio Tag High : None
Ldp Sync Admin State : Up
LDP-over-RSVP : Disabled
IGP-Shortcut : Disabled
IPv4 IGP SC Tunn-Nhop : Res-Disabled
IPv6 IGP SC Tunn-Nhop : Res-Disabled
SRv4 IGP SC Tunn-Nhop : Res-Disabled
SRv6 IGP SC Tunn-Nhop : Res-Disabled
Advertise-Tunnel-Link : Disabled
Export Limit : 0
Exp Lmt Log Percent : 0
Loopfree-Alternate : Disabled
Remote-LFA : Disabled
Max PQ Cost : 4261412864
Remote-LFA (node-protect) : Disabled
Max PQ nodes (node-protect) : 16
Augment-route-table : Disabled
TI-LFA : Disabled
Max SR FRR Labels : 2
TI-LFA (node-protect) : Disabled
L1 LFA : Included
L2 LFA : Included
Advertise Router Cap : Area
Hello Padding : Disabled
L1 Hello Padding : Disabled
L2 Hello Padding : Disabled
Ignore Lsp Errors : Disabled
Ignore Narrow Metric : Disabled
Reference Bandwidth : 0
Ucast Import Disable : None
Segment Routing : Up
Segment Routing MT2 : Disabled
Flex Algo : Up
Mapping Server : Down
Purge Originator Id : Disabled
Class Based Forwarding : Disabled
Entropy Label : Enabled
Override ELC : Disabled
Micro loop avoidance : Disabled fib-delay 15
UPA Received Processing : Disabled
UPA Lifetime : 180
UPA Metric : 4261412865
UPA Max Number Advertised : 32
===============================================================================
|
Label |
Description |
|---|---|
|
ISIS Cfg System Id |
Displays the configured IS-IS system ID |
|
ISIS Oper System Id |
Displays the operational IS-IS system ID |
|
ISIS Cfg Router Id |
Displays the configured IS-IS router ID |
|
ISIS Oper Router Id |
Displays the operational IS-IS router ID |
|
ISIS Cfg IPv6 Router Id |
Displays the configured IS-IS IPv6 router ID |
|
ISIS Oper IPv6 Router Id |
Displays the operational IS-IS IPv6 router ID |
|
ASN |
Displays the Autonomous System Number (ASN) the IGP uses when the IS-IS Traffic Engineering Database (TEDB) export is enabled. The ASN value represents either the ASN from the confederation AS, or the router AS if confederations are not configured. |
|
Admin State Oper State |
Displays one of the following:
|
|
Ipv4 Routing |
Displays one of the following:
|
|
Ipv6 Routing |
Displays one of the following:
|
|
Mcast Ipv4 Routing |
Displays one of the following:
|
|
Mcast Ipv6 Routing |
Displays one of the following:
|
|
Last Enabled |
Displays the date and time when IS-IS was last enabled in the router |
|
Level Capability |
Displays the routing level for the IS-IS routing process |
|
Authentication Check |
Displays one of the following:
|
|
Auth Keychain |
Displays the authentication keychain name used by IS-IS for the session when enabled |
|
Authentication Type |
Displays the authentication method used to verify the authenticity of packets sent by neighboring routers on an IS-IS interface |
|
CSNP-Authentication |
Displays one of the following:
|
|
HELLO-Authentication |
Displays one of the following:
|
|
PSNP-Authentication |
Displays one of the following:
|
|
Traffic Engineering |
Displays one of the following:
|
|
Oper IPv6 TE Router Id |
Displays the value of the IS-IS IPv6 TE Router ID TLV (TLV 140) defined by RFC 6119. The IPv6 TE Router ID is configured using the configure router ipv6-te-router-id interface name command. By default, the system IPv6 address is used when IPv6 TE is enabled. |
|
Graceful Restart |
Displays one of the following:
|
|
GR Helper Mode |
Displays if GR helper mode is configured |
|
Overload-On-Boot Timeout |
Displays if the overload-on-boot timeout is configured |
|
Overload Max-Metric |
Displays if overload max metric is configured |
|
Overload-On-Boot Max-Metric |
Displays if the overload-on-boot maximum metric is configured |
|
Overload Include Locators |
Displays if overload include locators is enabled |
|
Ovl Export Interlevel |
Displays if overload export interlevel is configured |
|
Ovl Export External |
Displays if overload export external is configured |
|
Ovl FIB Error Notify Only |
Displays if overload notification only is configured:
|
|
Ovl FIB Error Retry |
Displays the amount of time in seconds until the router periodically retries to program the FIB during the gracious overload condition |
|
LSP Lifetime |
Displays the LSP lifetime value |
|
LSP Min Remaining Lifetime |
Displays the LSP minimum remaining lifetime information |
|
LSP Refresh Half Interval |
Displays the LSP refresh half interval |
|
LSP Wait (ms) |
Displays the max, initial, and initial wait times |
|
LSP MTU Size |
Displays the LSP Maximum Transmission Unit (MTU) size |
|
L1 LSP MTU Size |
Displays the level 1 LSP MTU size |
|
L2 LSP MTU Size |
Displays the level 2 LSP MTU size |
|
L1 MAX LSP MTU Size |
Displays the level 1 maximum LSP MTU size |
|
L2 MAX LSP MTU Size |
Displays the level 2 maximum LSP MTU size |
|
Adjacency Check |
Displays the adjacency check configuration |
|
L1 Auth Keychain or L2 Auth Keychain |
Displays if authentication keychain is enabled |
|
L1 Auth Type or L2 Auth Type |
Displays if the authentication type is configured |
|
L1 CNSP-Authentication or L2 CSNP-Authentication |
Displays one of the following:
|
|
L1 HELLO-Authentication or L2 HELLO-Authentication |
Displays one of the following:
|
|
L1 PSNP-Authentication or L2 PSNP-Authentication |
Displays one of the following:
|
|
L1 Preference or L2 Preference |
Displays the preference |
|
L1 Ext. Preference or L2 Ext. Preference |
Displays the external preference |
|
L1 Wide Metrics or L2 Wide Metrics |
Displays if the wide metrics features is enabled |
|
L1 LSDB Overload or L2 LSDB Overload |
Displays if the Link-State Database (LSDB) overload is enabled |
|
L1 LSPs or L2 LSPs |
Displays the number of LSPs |
|
L1 Default Metric or L2 Default Metric |
Displays the default metric |
|
L1 IPv6 Def Metric or L2 IPv6 Def Metric |
Displays the IPv6 default metric |
|
L1 Mcast IPv4 Def Metric or L2 Mcast IPv4 Def Metric |
Displays the multicast IPv4 default metric |
|
L1 Mcast IPv6 Def Metric or L2 Mcast IPv6 Def Metric |
Displays the multicast IPv6 default metric |
|
L1 Adv Router Cap or L2 Adv Router Cap |
Displays if the advanced router capacity is enabled for the level |
|
L1 Bier Template or L2 Bier Template |
Displays if the Bit Indexed Explicit Replication (BIER) template is enabled |
|
L1 Total Exp Routes or L2 Total Exp Routes |
Displays the total exp routes for the level |
|
All-L1-Mac_Addr (Cfg) or All-L2-MacAddr (Cfg) |
Displays the MAC addresses for the level |
|
Last SPF |
Displays the last shortest path first (SPF) calculation time |
|
SPF Wait (ms) |
Displays the SPF wait time before doing another calculation |
|
Muti-topology |
Displays if multi-topology is enabled |
|
IPv6-Unicast MT2 |
Displays if IPv6 unicast MT2 is enabled |
|
IPv4-Multicast MT3 |
Displays if IPv4 multicast MT3 is enabled |
|
IPv6-Multicast MT4 |
Displays if IPv6 multicast MT4 is enabled |
|
Area Addresses |
Displays the area addresses |
|
Standard Multi-Instance |
Displays if a standard multi-instance is enabled |
|
IID TLV |
Displays if the Instance ID TLV is enabled |
|
Prefix TLV |
Displays if the Prefix Attributes TLV is enabled |
|
Export Policies |
Displays if there are export policies |
|
Import Policies |
Displays if there are import policies |
|
LFA Policies |
Displays if there are Loop-Free Alternate policies |
|
Multicast Import |
Displays if there is a multicast import |
|
Advertise-Passive-Only |
Displays if advertise passive only is enabled |
|
Ignore Attached Bit |
Displays if ignore attached bit is enabled |
|
Suppress Attached Bit |
Displays if suppress attached bit is enabled |
|
Default Route Tag |
Displays the default route tag if one exists |
|
Rib Prio List High |
Displays the Routing Information Base (RIB) high priority list |
|
Rib Prio Tag High |
Displays the RIB high priority tag |
|
Ldp Sync Admin State |
Displays if the IGP-LDP synchronization feature is enabled on all interfaces participating in the OSPF routing protocol |
|
LDP-over-RSVP |
Displays if LDP over RSVP is enabled |
|
IGP-Shortcut |
Displays if Interior Gateway Protocol (IGP) shortcuts are enabled |
|
IPv4 IGP SC Tunn-Nhop |
Displays if IPv4 IGP shortcut tunnel next hop is enabled |
|
IPv6 IGP SC Tunn-Nhop |
Displays the IPv6 IGP shortcut tunnel next hop is enabled |
|
SRv4 IGP SC Tunn-Nhop |
Displays if the SRv4 IGP shortcut tunnel next hop is enabled |
|
SRv6 IGP SC Tunn-Nhop |
Displays if the SRv6 IGP shortcut tunnel next hop is enabled |
|
Advertise-Tunnel-Link |
Displays if advertise tunnel link is enabled |
|
Export Limit |
Displays the export limit |
|
Exp Lmt Log Percent |
Displays the export limit log percentage |
|
Loopfree-Alternate |
Displays if Loop-Free Alternate (LFA) is enabled in this IS-IS instance |
|
Remote-LFA |
Displays if remote LFA is enabled |
|
Max PQ Cost |
Displays the maximum PQ cost |
|
Remote-LFA (node-protect) |
Displays if remote LFA is enabled |
|
Max PQ Nodes (node-protect) |
Displays the maximum PQ nodes |
|
LFA NH Template |
Displays if the LFA Next-Hop (NH) template is applied for the configured LFA policies |
|
Augment-route-table |
Displays if the augment route table feature is enabled |
|
TI-LFA |
Displays if Topology-Independent Loop-Free Alternate (TI-LFA) is enabled |
|
Max SR FFR Labels |
Displays the maximum Segment Routing Fast Reroute (SR FRR) labels |
|
TI-LFA (node-protect) |
Displays if TI-LFA node protect is enabled |
|
L1 LFA |
Displays if level 1 LFA is included |
|
L2 LFA |
Displays if level 2 LFA is included |
|
Advertise Router Cap |
Displays the advertise router capacity |
|
Hello Padding L1 Hello Padding L2 Hello Padding |
Displays if Hello padding is enabled |
|
Ignore Lsp Errors |
Displays if ignoring LSP errors is enabled |
|
Ignore Narrow Metric |
Displays if ignoring narrow metric is enabled |
|
Reference Bandwidth |
Displays the reference bandwidth |
|
Ucast Import Disable |
Displays the Ucast import disable configuration information |
|
Segment Routing |
Displays if Segment Routing is enabled |
|
Segment Routing MT2 |
Displays if Segment Routing MT2 is enabled. |
|
Flex Algo |
Displays if Flexible Algorithms are up |
|
Mapping Server |
Displays if the mapping server is up |
|
Purge Originator Id |
Displays if purge originator ID is enabled |
|
Class Based Forwarding |
Displays if class based forwarding is enabled |
|
Entropy Label |
Displays if the entropy label is enabled |
|
Override ELC |
Displays if override ELC is enabled |
|
Micro loop avoidance |
Displays if micro-loop avoidance is enabled and the Forwarding Information Base (FIB) delay |
|
UPA Received Processing |
Displays if Unreachable Prefix Announcement (UPA) processing is enabled. When enabled, this allows processing of received UPAs from other routers. When disabled, received UPAs are handled briefly with normal IGP routes and ignored by the router. |
|
UPA Lifetime |
Displays the amount of time a UPA is advertised |
|
UPA Metric |
Displays the metric to an advertised UPA |
|
UPA Max Number Advertised |
Displays the maximum number of UPAs the router can advertise |
status
Syntax
status
Context
[Tree] (show>router>ospf3 status)
[Tree] (show>router>ospf status)
Full Context
show router ospf3 status
show router ospf status
Description
Displays the general status of OSPF.
Platforms
All
Output
OSPF Status Output Fields
Output fields: OSPF status describes the command output fields for OSPF status.
|
Label |
Description |
|---|---|
|
OSPF Router Id |
A 32-bit integer uniquely identifying the router in the Autonomous System. The SR OS system defaults to the System IP address or if not configured the 32 least significant bits of the system MAC address. |
|
OSPF Version |
The current version number of the OSPF protocol is 2. |
|
OSPF Admin Status |
Disabled — Denotes that the OSPF process is disabled on all interfaces. Enabled — Denotes that the OSPF process is active on at least one interface. |
|
OSPF Oper Status |
Disabled — Denotes that the OSPF process is not operational on all interfaces. Enabled — Denotes that the OSPF process is operational on at least one interface. |
|
Preference |
The route preference for OSPF internal routes. |
|
External Preference |
The route preference for OSPF external routes. |
|
Backbone Router |
False — This variable indicates that this router is not configured as an OSPF back bone router. True — This variable indicates that this router is configured as an OSPF back bone router. |
|
Area Border Router |
False — This router is not an area border router. True — This router is an area border router. |
|
AS Border Router |
False — This router is not configured as an Autonomous System border router. True — This router is configured as an Autonomous System border router. |
|
OSPF Ldp Sync Admin Status |
Indicates whether the IGP-LDP synchronization feature is enabled or disabled on all interfaces participating in the OSPF routing protocol. |
*A:Dut-A>config>service# show router ospf status
===============================================================================
Rtr Base OSPFv2 Instance 0 Status
===============================================================================
OSPF Cfg Router Id : 0.0.0.0
OSPF Oper Router Id : 10.20.1.1
OSPF Version : 2
OSPF Admin Status : Enabled
OSPF Oper Status : Enabled
Graceful Restart : Disabled
GR Helper Mode : Disabled
GR Strict LSA Checking : Enabled
Preference : 10
External Preference : 150
Backbone Router : True
Area Border Router : False
AS Border Router : False
Opaque LSA Support : True
Traffic Engineering Support : True
RFC 1583 Compatible : True
Demand Exts Support : False
In Overload State : False
In External Overflow State : False
Exit Overflow Interval : 0
Last Overflow Entered : Never
Last Overflow Exit : Never
External LSA Limit : -1
Reference Bandwidth : 100,000,000 Kbps
Init SPF Delay : 1000 msec
Sec SPF Delay : 1000 msec
Max SPF Delay : 1000 msec
Min LS Arrival Interval : 1000 msec
Init LSA Gen Delay : 5000 msec
Sec LSA Gen Delay : 5000 msec
Max LSA Gen Delay : 5000 msec
Lsa accumulate : 1000 msec
Redistribute delay : 1000 msec
Incremental SPF wait : 1000 msec
Last Ext SPF Run : Never
Ext LSA Cksum Sum : 0x0
OSPF Last Enabled : 07/06/2017 18:51:52
Unicast Import : True
Multicast Import : False
Export Policies : None
Import Policies : None
Lfa Policies : None
OSPF Ldp Sync Admin Status : Enabled
LDP-over-RSVP : Disabled
IGP-Shortcut : Disabled
IPv4 IGP SC Tunn-Nhop : Res-Disabled
Advertise-Tunnel-Link : Disabled
LFA : Disabled
Remote-LFA : Disabled
Max PQ Cost : 65535
TI-LFA : Disabled
Max SR FRR Labels : 2
Export Limit : 0
Export Limit Log Percent : 0
Total Exp Routes : 0
RIB-priority-high prefix list: None
Segment Routing : Enabled
Database export : Disabled
ASN : n/a
Entropy Label : Enabled
Override ELC : Enabled
===============================================================================
*A:Dut-C>config>router>ospf3# show router ospf3 0 status
===============================================================================
Rtr Base OSPFv3 Instance 0 Status
===============================================================================
OSPF Cfg Router Id : 10.20.1.3
OSPF Oper Router Id : 10.20.1.3
OSPF Version : 3
OSPF Admin Status : Enabled
OSPF Oper Status : Enabled
Graceful Restart : Disabled
GR Helper Mode : Disabled
GR Strict LSA Checking : Enabled (operational down)
Preference : 10
External Preference : 150
Backbone Router : False
Area Border Router : False
AS Border Router : True
Traffic Engineering Support : False
Demand Exts Support : False
In Overload State : False
In External Overflow State : False
Exit Overflow Interval : 0
Last Overflow Entered : Never
Last Overflow Exit : Never
External LSA Limit : -1
Reference Bandwidth : 100,000,000 Kbps
Init SPF Delay : 1000 msec
Sec SPF Delay : 1000 msec
Max SPF Delay : 10000 msec
Min LS Arrival Interval : 1000 msec
Init LSA Gen Delay : 5000 msec
Sec LSA Gen Delay : 5000 msec
Max LSA Gen Delay : 5000 msec
Lsa accumulate : 1000 msec
Redistribute delay : 1000 msec
Incremental SPF wait : 1000 msec
Last Ext SPF Run : 10/11/2018 07:39:48
Ext LSA Cksum Sum : 0x10926
OSPF Last Enabled : 10/11/2018 07:39:45
Unicast Import : True
Multicast Import : False
Export Policies : static
Import Policies : None
Lfa Policies : None
OSPF Ldp Sync Admin Status : Enabled
LDP-over-RSVP : Disabled
IGP-Shortcut : Disabled
IPv6 IGP SC Tunn-Nhop : Res-Disabled
Advertise-Tunnel-Link : Disabled
LFA : Enabled
Remote-LFA : Enabled
Max PQ Cost : 65535
TI-LFA : Disabled
Max SR FRR Labels : 2
Export Limit : 0
Export Limit Log Percent : 0
Total Exp Routes : 1
RIB-priority-high prefix list: None
Segment Routing : Enabled
Extended LSA : sparse
===============================================================================
status
Syntax
status
Context
[Tree] (show>router>isis>srv6 status)
Full Context
show router isis segment-routing-v6 status
Description
This command displays the IS-IS SRv6 status.
Platforms
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR
status
Syntax
status
Context
[Tree] (show>subscr-mgmt status)
Full Context
show subscriber-mgmt status
Description
Commands in this context display subscriber management status information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
status
Syntax
status
Context
[Tree] (show>app-assure>group>aa-sub>um status)
Full Context
show application-assurance group aa-sub usage-monitor status
Description
This command displays the usage monitor status.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
status
Syntax
status
Context
[Tree] (show>router>bier status)
Full Context
show router bier status
Description
This command displays the BIER status.
Platforms
All
Output
The following output is an example of BIER status information, and Output fields: BIER status describes the output fields.
Output Example# show router bier status
===================================================================
BIER Status
===================================================================
Admin State : Up Oper State : Up
FRR State : Disabled BFD State : Disabled
Service-reserved-label-block: [NA | name of reserved block]
===================================================================
|
Label |
Description |
|---|---|
|
Admin State |
Displays the administrative state |
|
Oper State |
Displays the operational state |
|
FRR State |
Displays the FRR state |
|
BFD State |
Displays the BFD state |
|
Service-reserved-label-block |
Displays the service reserved label block name |
steering-profile
steering-profile
Syntax
steering-profile steering-profile-name
Context
[Tree] (show>subscr-mgmt steering-profile)
Full Context
show subscriber-mgmt steering-profile
Description
This command displays steering profile information.
Parameters
- steering-profile-name
-
Specifies an existing steering profile name.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
sticky-dest
sticky-dest
Syntax
sticky-dest
Context
[Tree] (tools>dump>filter>resources sticky-dest)
Full Context
tools dump filter resources sticky-dest
Description
This command displays information about resources pertaining to sticky destinations timers.
Platforms
All
Output
The following output is an example of sticky destination filter action information.
Output Example===============================================================================
Filter action - Sticky-dest resources
===============================================================================
Used : 1
Free : 2047
Total : 2048
===============================================================================
sticky-leases
sticky-leases
Syntax
sticky-leases [hostname]
Context
[Tree] (show>router>dhcp>server sticky-leases)
Full Context
show router dhcp local-dhcp-server sticky-leases
Description
This command shows either all sticky leases or a single specific sticky lease created under the specified DHCP server.
Parameters
- hostname
-
Specifies the name of the host for which an entry is created.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of sticky lease information
Output ExampleNode# show router dhcp local-dhcp-server "dhcp_server" sticky-leases
===============================================================================
DHCP Server Sticky Leases
===============================================================================
Hostname IP address
-------------------------------------------------------------------------------
test_lease 10.0.0.1
-------------------------------------------------------------------------------
No. of Matching Entries: 1
===============================================================================
Output fields: sticky leases describes the sticky leases field descriptions.
|
Field |
Description |
|---|---|
|
Hostname |
The name of the sticky host |
|
IP address |
The IP address of the sticky host |
|
No. of Matching Entries |
The total numbers of entries matching the command criteria |
sticky-leases
Syntax
sticky-leases hostname [hostname]
sticky-leases hostname-prefix [hostname-prefix]
Context
[Tree] (clear>router>dhcp>server sticky-leases)
Full Context
clear router dhcp local-dhcp-server sticky-leases
Description
This command clears sticky leases.
Parameters
- hostname
-
Clears information about the name of the host for which an entry is cleared.
- hostname-prefix
-
Clears information about the sub-string of all host names starting with that sub-string.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
stop
stop
Syntax
stop
Context
[Tree] (tools>perform>router>l2tp>group stop)
Full Context
tools perform router l2tp group stop
Description
This command triggers an attempt to immediately stop all the L2TP connections within the specified L2TP tunnel group.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
stop
Syntax
stop
Context
[Tree] (tools>perform>router>l2tp>tunnel stop)
[Tree] (tools>perform>router>l2tp>group>tunnel stop)
Full Context
tools perform router l2tp tunnel stop
tools perform router l2tp group tunnel stop
Description
This command triggers an attempt to immediately stop all the L2TP connections within the specified L2TP tunnel.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
stop
Syntax
stop [script-policy-name] [owner script-policy-owner] [ all]
Context
[Tree] (tools>perform>system>script-control>script-policy stop)
Full Context
tools perform system script-control script-policy stop
Description
This command stops the execution of scripts.
Parameters
- script-policy-name
-
Specifies to only stop scripts with the specified script-policy, up to 32 characters.
- script-policy-owner
-
Specifies to only stop scripts that are associated with script-policies with the specified owner, up to 32 characters.
- all
-
Specifies to stop all running scripts.
Platforms
All
stp
stp
Syntax
stp [detail]
Context
[Tree] (show>service>id stp)
Full Context
show service id stp
Description
Displays information for the spanning tree protocol instance for the service.
Parameters
- detail
-
Displays detailed information.
Platforms
All
Output
The following output is an example of service STP information.
Output ExampleA:ALA-12# show service id 1 stp
==============================================================================
Spanning Tree Information
==============================================================================
VPLS Spanning Tree Information
------------------------------------------------------------------------------
RSTP Admin State : Up RSTP Oper State : Down
Core Connectivity : Down
Bridge-id : 04:67:ff:00:00:01
Hold Timer : 1 Bridge fwd delay : 15
Bridge Hello time : 1 Bridge max age : 20
Bridge priority : 1 Topology change : Inactive
Last Top. change : 0d 00:00:00 Top. change count : 0
Root bridge-id : 00:03:fa:00:00:00
Root path cost : 1 Root forward delay: 15
Root hello time : 1 Root max age : 20
Root priority : 0 Root port : vcp
------------------------------------------------------------------------------
Spanning Tree Specifics
------------------------------------------------------------------------------
SAP Identifier : 1/1/7:0 RSTP State : Down
STP Port State : Forwarding BPDU encap : dot1d
Port Number : 2048 Priority : 128
Cost : 10 Fast Start : Disabled
Designated Port : 34816 Designated Bridge : 02:fa:00:04:54:01
==============================================================================
A:ALA-12#
The following output is an example for the 7450 ESS.
ALA-1# show service id 1 stp
===============================================================================
Inherited Rstp State (from mVPLS), Service 1
===============================================================================
Sap/Spoke Id Oper- Prune- Port- Managed by Managed by
State State State Service Sap/spoke
-------------------------------------------------------------------------------
1/1/1:2 Down Pruned Discarding 101 1/1/1:1
100:1 Up Pruned Discarding 100 100:100
===============================================================================
Output fields: service ID STP describes show service-id STP output fields:
|
Label |
Description |
|---|---|
|
RSTP Admin State |
The administrative state of the Rapid Spanning Tree Protocol instance associated with this service |
|
Core Connectivity |
The connectivity status to the core |
|
RSTP Oper State |
The operational state of the Rapid Spanning Tree Protocol instance associated with this service. This field is applicable only when STP is enabled on the router. |
|
Bridge-id |
The MAC address used to identify this bridge in the network. |
|
Hold Time |
The interval length during which no more than two Configuration BPDUs shall be transmitted by this bridge |
|
Bridge fwd delay |
The speed of bridge state changes when moving toward the forwarding state |
|
Bridge Hello time |
The amount of time between the transmission of Configuration BPDUs |
|
Bridge max age |
The maximum age of spanning tree protocol information learned from the network on any port before it is discarded. This is the actual value that this bridge is currently using. |
|
Bridge priority |
The priority of the spanning tree protocol instance associated with this service |
|
Topology change |
Topology change is currently in progress. |
|
Last Top. change |
The time (in hundredths of a second) since the last time a topology change was detected by the Spanning Tree Protocol instance associated with this service |
|
Top. change count |
The total number of topology changes detected by the Spanning Tree Protocol instance associated with this service since the management entity was last reset or initialized |
|
Root bridge-id |
The Root bridge-id |
|
Root path cost |
The Root path cost |
|
Root forward delay |
The Root forward delay |
|
Root hello time |
The Root hello time |
|
Root max age |
The Root maximum age |
|
Root priority |
The Root priority level |
|
Root port |
The Root port number |
|
SAP Identifier |
The SAP identifier |
|
RSTP State |
The RSTP state |
|
STP Port State |
The STP port state |
|
BPDU encap |
The BPDU encapsulation |
|
Port Number |
The port number |
|
Priority |
The priority level |
|
Cost |
The cost |
|
Fast Start |
The fast start state |
|
Designated Port |
The designated port |
|
Designated Bridge |
The designated bridge |
|
Sap/Spoke Id |
The SAP or spoke ID |
|
Oper-State |
The operational state |
|
Prune-State |
The prune state |
|
Port-State |
The port state |
|
Managed by Service |
The managed service |
|
Managed by Sap/spoke |
The managed SAP or spoke |
stp
streaming
streaming
Syntax
streaming
Context
[Tree] (show>oam-pm streaming)
Full Context
show oam-pm streaming
Description
Commands in this context show OAM performance monitoring telemetry report streaming information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
streaming
Syntax
streaming
Context
[Tree] (show>snmp streaming)
Full Context
show snmp streaming
Description
Commands in this context display streaming counters information.
Platforms
All
sub-ident-policy
sub-ident-policy
Syntax
sub-ident-policy [sub-ident-policy-name [ association]]
sub-ident-policy sub-ident-policy-name script { primary | secondary | tertiary}
Context
[Tree] (show>subscr-mgmt sub-ident-policy)
Full Context
show subscriber-mgmt sub-ident-policy
Description
This command displays subscriber identification policy information.
Parameters
- sub-ident-policy-name
-
Specifies an existing subscriber identification policy name.
- association
-
Displays information configured with the specified sub-ident-policy-name.
- script {primary | secondary | tertiary}
-
Displays information for the specified identification script.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subscriber management subscriber identification policy information.
Output ExampleB:Dut-A>show>subscr-mgmt# sub-ident-policy
===============================================================================
Subscriber Identification Policies
===============================================================================
Name Description
-------------------------------------------------------------------------------
sub_ident_all
sub_ident_pc
-------------------------------------------------------------------------------
Number of Subscriber Identification Policies : 2
===============================================================================
B:Dut-A>show>subscr-mgmt#
B:Dut-A>show>subscr-mgmt# sub-ident-policy sub_ident_all
===============================================================================
Subscriber Identification Policy sub_ident_all
===============================================================================
Sub Profile Map
-------------------------------------------------------------------------------
Key Sub profile
-------------------------------------------------------------------------------
sub_prof100 sub_prof100
sub_prof110 sub_prof110
sub_prof120 sub_prof120
sub_prof130 sub_prof130
sub_prof140 sub_prof140
sub_prof230 sub_prof230
sub_prof80 sub_prof80
sub_prof81 sub_prof81
sub_prof90 sub_prof90
-------------------------------------------------------------------------------
SLA Profile Map
-------------------------------------------------------------------------------
Key SLA profile
-------------------------------------------------------------------------------
sla_prof100_VOIP sla_prof100_VOIP
sla_prof110_VOIP sla_prof110_VOIP
sla_prof120_VOIP sla_prof120_VOIP
sla_prof130_VOIP sla_prof130_VOIP
sla_prof140_VOIP sla_prof140_VOIP
sla_prof230_VOIP sla_prof230_VOIP
sla_prof80_VOIP sla_prof80_VOIP
sla_prof81_VOIP sla_prof81_VOIP
sla_prof90_VOIP sla_prof90_VOIP
-------------------------------------------------------------------------------
Python Scripts
-------------------------------------------------------------------------------
# Admin Oper Script
State State Name
-------------------------------------------------------------------------------
Primary Down Down pyTom.py
Secondary Up Up pyTomDebug.py
Tertiary Up Up hardcoded.py
===============================================================================
B:Dut-A>show>subscr-mgmt#
B:Dut-A>show>subscr-mgmt# sub-ident-policy sub_ident_all association
===============================================================================
Subscriber Identification Policy sub_ident_all
===============================================================================
SAP Associations
-------------------------------------------------------------------------------
Service-Id : 80 (VPLS)
- SAP : 1/2/1:80
Service-Id : 90 (VPLS)
- SAP : 1/2/1:90
Service-Id : 100 (VPLS)
- SAP : 1/2/1:100
- SAP : 1/2/1:101
- SAP : 1/2/1:102
Service-Id : 110 (VPLS)
- SAP : 1/2/1:110
- SAP : 1/2/1:111
- SAP : 1/2/1:112
Service-Id : 120 (VPLS)
- SAP : 1/2/1:120
- SAP : 1/2/1:121
- SAP : 1/2/1:122
Service-Id : 130 (VPLS)
- SAP : 1/2/1:130
Service-Id : 140 (VPLS)
- SAP : 1/2/1:140
===============================================================================
B:Dut-A>show>subscr-mgmt#
B:Dut-A>show>subscr-mgmt# sub-ident-policy sub_ident_all script primary
===============================================================================
Subscriber Identification Policy sub_ident_all
===============================================================================
Primary Script
-------------------------------------------------------------------------------
URL : ftp://xxx:yyy@a.b.c.d/pyTom.py
Admin State : Down Oper State : Down
-------------------------------------------------------------------------------
Source (dumped from memory)
-------------------------------------------------------------------------------
Script is not active.
-------------------------------------------------------------------------------
===============================================================================
B:Dut-A>show>subscr-mgmt#
B:Dut-A>show>subscr-mgmt# sub-ident-policy sub_ident_all script secondary
===============================================================================
Subscriber Identification Policy sub_ident_all
===============================================================================
Secondary Script
-------------------------------------------------------------------------------
URL : ftp://xxx:yyy@a.b.c.d/pyTomDebug.py
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Source (dumped from memory)
-------------------------------------------------------------------------------
1 import alc
2 yiaddr = alc.dhcp.yiaddr
3 # Subscriber ID equals full client IP address.
4 # Note: IP address 10.10.10.10 yields 'sub-168430090'
5 # and not 'sub-10.10.10.10'
6 alc.dhcp.sub_ident = 'sub-' + str(yiaddr)
7 # DHCP server is configured such that the third byte (field) of the IP
8 # address indicates the session Profile ID.
9 alc.dhcp.sla_profile = 'sp-' + str((yiaddr & 0x0000FF00) >> 8)
===============================================================================
B:Dut-A>show>subscr-mgmt#
B:Dut-A>show>subscr-mgmt# sub-ident-policy sub_ident_all script tertiary
===============================================================================
Subscriber Identification Policy sub_ident_all
===============================================================================
Tertiary Script
-------------------------------------------------------------------------------
URL : ftp://xxx:yyy@a.b.c.d/hardcoded.py
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Source (dumped from memory)
-------------------------------------------------------------------------------
1 from alc import dhcp
2
3 dhcp.sub_ident = 'sub_ident_A_1'
4 dhcp.sub_profile_string = 'sub_prof_B_2'
5 dhcp.sla_profile_string = 'sla_prof_C_3'
6
===============================================================================
B:Dut-A>show>subscr-mgmt#
Output fields: subscriber identification policy describes subscriber identification policy output fields.
|
Field |
Description |
|---|---|
|
Name |
The subscriber identification policy name |
|
Description |
The user provided description of this policy |
|
Number of Subscriber Identification Policies |
The total number of subscriber identification policies configured on the node |
|
Sub Profile Map |
The subscriber profile used to define the aggregate QoS for all hosts within a subscriber context |
|
Key |
The key that defines the auto-generated subscriber identification key for PPP hosts. |
|
Sub profile |
A list of subscriber identification profiles |
|
SLA profile |
A list of SLA profiles |
|
Admin State |
The administrative state of the Python scripts |
|
Oper State |
The operational state of the Python scripts |
|
Script Name |
The Python policy script name |
|
SAP Associations |
The subscriber identification policy SAP associations |
|
Service-Id |
The service ID associated with the subscriber identification policy |
|
SAP |
The SAP ID associated with the subscriber identification policy |
|
URL |
The URL of the script to change the Python message |
|
Admin State |
The admin state of the script |
|
Oper State |
The operational state of the script |
|
Primary Script |
Information about the primary Python script |
|
Secondary Script |
Information about the secondary Python script |
sub-mcac
sub-mcac
Syntax
sub-mcac [subscriber sub-ident-string] [ policy sub-mcac-policy-name]
Context
[Tree] (show>service>active-subscribers sub-mcac)
Full Context
show service active-subscribers sub-mcac
Description
This command displays active subscriber MCAC information.
Parameters
- sub-ident-string
-
Specifies the subscriber identification string, up to 32 characters.
- sub-mac-policy-name
-
Specifies the subscriber MAC policy name, up to 32 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of active subscriber MCAC information.
Output Example*A:eng-BNG-2# show service active-subscribers sub-mcac
===============================================================================
Active Subscribers Sub-MCAC
===============================================================================
Subscriber : user_1
MCAC-policy : sub-mcac-policy-01 (inService)
In use mandatory bandwidth : 10
In use optional bandwidth : 10
Available mandatory bandwidth : 1000
Available optional bandwidth : 100
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of Subscribers: 1
===============================================================================
sub-mcac-policy
sub-mcac-policy
Syntax
sub-mcac-policy
sub-mcac-policy policy-name association
sub-mcac-policy policy-name
Context
[Tree] (show>subscr-mgmt sub-mcac-policy)
Full Context
show subscriber-mgmt sub-mcac-policy
Description
This command displays subscriber MCAC policy information.
Parameters
- policy-name
-
Specifies the subscriber MCAC policy name, up to 32 characters.
- association
-
Displays information associated with the subscriber MCAC policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s
sub-profile
sub-profile
Syntax
sub-profile [sub-profile-name [association]]
Context
[Tree] (show>subscr-mgmt sub-profile)
Full Context
show subscriber-mgmt sub-profile
Description
This command displays subscriber profile information.
Parameters
- sub-profile-name
-
Specifies an existing subscriber profile name.
- association
-
Displays the association information configured with the specified sub-profile-name.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subscriber profile information.
Output Example# show subscriber-mgmt sub-profile "sub-profile-10"
===============================================================================
Subscriber Profile sub-profile-10
===============================================================================
Description : (Not Specified)
Control plane(s) : local
Host Limits : overall 1
ipv4-overall 1
ipv4-arp 1
ipv4-dhcp 1
ipv4-ppp 1
ipv6-overall 1
ipv6-pd-overall 1
ipv6-pd-ipoe-dhcp 1
ipv6-pd-ppp-dhcp 1
ipv6-wan-overall 1
ipv6-wan-ipoe-dhcp 1
ipv6-wan-ipoe-slaac 1
ipv6-wan-ppp-dhcp 1
ipv6-wan-ppp-slaac 1
lac-overall 1
Session Limits : overall 1
ipoe 1
pppoe-overall 1
pppoe-local 1
pppoe-lac 1
l2tp-overall 1
l2tp-lns 1
l2tp-lts 1
I. Sched. Policy : N/A
E. Sched. Policy : N/A E. Agg Rate Limit: Max
E. Min Resv Bw : 1
I. Policer Ctrl. : N/A
E. Policer Ctrl. : N/A
I. vport-hashing : Disabled
I. sec-sh-hashing: Disabled
Q Frame-Based Ac*: Disabled
Acct. Policy : N/A Collect Stats : Disabled
ANCP Pol. : N/A
Accu-stats-pol : (Not Specified)
HostTrk Pol. : N/A
IGMP Policy : N/A
MLD Policy : N/A
PIM Policy : N/A
Sub. MCAC Policy : N/A
NAT Policy : N/A
Firewall Policy : N/A
UPnP Policy : N/A
NAT Prefix List : N/A
Allow NAT bypass : No
NAT access mode : auto
Def. Encap Offset: none Encap Offset Mode: none
Vol stats type : full
Preference : 5
LAG hash class : 1
LAG hash weight : 1
-------------------------------------------------------------------------------
Radius Accounting
-------------------------------------------------------------------------------
Policy : N/A
Session Opti.Stop: False
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
HS
-------------------------------------------------------------------------------
SLA-mode : expanded E Agg Rate Limit : Maximum
E. Min Resv Bw : 1
E low burst class: 6
-------------------------------------------------------------------------------
Last Mgmt Change : 09/30/2020 15:39:24
===============================================================================
* indicates that the corresponding row element may have been truncated.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SLA Profile Map
-------------------------------------------------------------------------------
Key SLA Profile
-------------------------------------------------------------------------------
No mappings configured.
===============================================================================
# show subscriber-mgmt sub-profile
===============================================================================
Subscriber Profiles
===============================================================================
Name Description
-------------------------------------------------------------------------------
sub_default
sub_prof100
sub_prof110
sub_prof120
sub_prof130
sub_prof140
sub_prof230
sub_prof80
sub_prof81
sub_prof90
sub_profPC1
sub_profPC2
sub_profPC3
-------------------------------------------------------------------------------
Number of Subscriber Profiles : 13
===============================================================================
A:Dut-A#
# show subscriber-mgmt sub-profile sub_prof100 association
===============================================================================
Subscriber Profile sub_prof100
-------------------------------------------------------------------------------
SAP Default-Profile Associations
-------------------------------------------------------------------------------
No associations found.
-------------------------------------------------------------------------------
SAP Static Host Associations
-------------------------------------------------------------------------------
No associations found.
-------------------------------------------------------------------------------
SAP Non-Sub-Traffic-Profile Associations
-------------------------------------------------------------------------------
No associations found.
-------------------------------------------------------------------------------
Sub-Ident-Policy Profile Map Associations
-------------------------------------------------------------------------------
Policy-name : sub_ident_all
- Key : sub_prof100
-------------------------------------------------------------------------------
Explicit Subscriber Map Associations
-------------------------------------------------------------------------------
No associations found.
===============================================================================
A:Dut-A#
Output fields: subscriber profile describes subscriber management profile field descriptions.
|
Field |
Description |
|---|---|
|
Name |
The subscriber profile name |
|
Description |
The user provided description of this policy |
|
Control plane(s) |
The subscriber profile controlled by the local control plane or CUPS control plane |
|
I. Sched. Policy |
The ingress scheduler policy assigned to the ingress subscriber profile |
|
E. Sched. Policy |
The egress scheduler policy assigned to the egress subscriber profile |
|
E. Agg Rate Limit |
The egress aggregate rate limit |
|
E. Min Resv Bw |
The egress minimum reserved bandwidth |
|
I. Policer Ctrl |
The ingress policer control status |
|
E. Policer Ctrl |
The egress policer control status |
|
I. vport-hashing |
The ingress vport-hashing status |
|
I. sec-sh-hashing |
The ingress security sh hashing status |
|
Q Frame-Based Ac* |
The Q frame-based accounting status |
|
Acct. Policy |
The number of accounting policies associated with this subscriber profile |
|
ANCP Pol. |
The ANCP policy |
|
Accu-stats-pol |
The accu-stats policy |
|
HostTrk Pol. |
The HostTrk policy |
|
IGMP Policy |
The IGMP policy |
|
MLD Policy |
The MLD policy |
|
PIM Policy |
The PIM policy |
|
Sub. MCAC Policy |
The subscriber MCAC policy |
|
NAT Policy |
The NAT policy |
|
Host Limits |
The configured maximum number of hosts per subscriber associated with this subscriber profile |
|
Session Limits |
The configured maximum number of sessions per subscriber associated with this subscriber profile |
|
Number of Subscriber Profiles |
The total number of subscriber profiles configured on this node |
|
Ingress Scheduler Overrides |
Information about ingress scheduler overrides for the subscriber profile |
|
Scheduler |
The scheduler name |
|
Rate |
The scheduler rate |
|
CIR |
The CIR rate allowed for this scheduler |
|
Egress Scheduler Overrides |
Information about egress scheduler overrides for the subscriber profile |
|
Key |
The lookup key in the map |
|
SLA Profile |
Information about the SLA profile map |
|
Collect Stats |
The accounting statistics collected on this subscriber profile. |
|
Last Mgmt Change |
The time of the most recent management-initiated change |
sub-services
sub-services
Syntax
sub-services [id service-id] [sap sap-id] [ ip ip-prefix/prefix-length] [ mac ieee-address] [pppoe-session-id pppoe-session-id] [ sub-service-name sub-service-name] [sub-service-type sub-service-type] [summary | associations]
Context
[Tree] (show>service sub-services)
Full Context
show service sub-services
Description
This command displays subscriber service information.
Parameters
- service-id
-
Specifies the subscriber service ID.
- sap-id
-
Specifies the SAP ID.
- ip-prefix/ip-prefix-length
-
Specifies information for the specified IP prefix and mask length.
- ieee-address
-
Specifies the MAC address.
- pppoe-session-id
-
Specifies the PPPoE session ID.
- sub-service-name
-
Specifies the subscriber service name, up to 255 characters.
- sub-service-type
-
Specifies the subscriber service type, up to 255 characters.
- summary
-
Displays summary information.
- associations
-
Displays information associated with the subscriber service.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
subnet-ext-stats
subnet-ext-stats
Syntax
subnet-ext-stats ip-address[/mask]
subnet-ext-stats pool pool-name
Context
[Tree] (show>router>dhcp>server subnet-ext-stats)
Full Context
show router dhcp local-dhcp-server subnet-ext-stats
Description
This command displays extended statistics per DHCPv4 subnet in local DHCPv4 server.
The following statistics are included in output:
-
The number of stable leases in the subnet
-
The number of provisioned address in the subnet
-
The number of used address in the subnet
-
The number of free address in the subnet
-
The percentage of used address
-
The percentage of free address
For each statistic (except for Provisioned Addresses), there is current value and peak value, peak value is the highest value since subnet creation or last reset via the clear router rt-id dhcp local-dhcp-server svr-name subnet-ext-stats command.
When parameter pool is used, the statistics of each subnet in the pool are displayed.
Parameters
- ip-address[/mask]
-
Specifies the subnet and mask.
- pool-name
-
Specifies the name of local DHCPv4 server pool.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subnet extended statistics information.
Output Exampleshow router 500 dhcp local-dhcp-server "d4" subnet-ext-stats 239.10.10.0/24
===============================================================================
Extended statistics for subnet 239.10.10.0/24
===============================================================================
Current Peak TimeStamp
-------------------------------------------------------------------------------
Local:
Stable Leases 1 1 01/07/2013 19:38:36
Provisioned Addresses 101
Used Addresses 1 1 01/07/2013 19:38:36
Free Addresses 100 100 01/07/2013 19:38:36
Used Pct 1 1 01/07/2013 19:38:36
Free Pct 99 99 01/07/2013 19:38:36
Last Reset Time 01/07/2013 19:07:11
-------------------------------------------------------------------------------
Number of entries 1
===============================================================================
Output fields: extended subnet statistics describes extended subnet statistics output field descriptions.
|
Field |
Descriptions |
|---|---|
|
Current |
The current statistics for the subnet |
|
Peak |
The peak statistics for the subnet |
|
TimeStamp |
The timestamp for the last reset |
|
Stable Leases |
The number of stable leases |
|
Provision Addresses |
The number of provisioned addresses in this subnet |
|
Used Addresses |
The number of used addresses in this subnet |
|
Free Address |
The number of free addresses in this subnet |
|
Used Pct |
The percentage of addresses in this subnet in use |
|
Free Pct |
The percentage of addresses in this subnet currently unused |
|
Last Reset Time |
The time of the last reset |
|
Number of entries |
The total number of entries |
subnet-ext-stats
Syntax
subnet-ext-stats ip-address[/mask]
subnet-ext-stats pool pool-name
Context
[Tree] (clear>router>dhcp>server subnet-ext-stats)
Full Context
clear router dhcp local-dhcp-server subnet-ext-stats
Description
This command clears extended subnet statistics.
Parameters
- ip-address[/mask]
-
Clears the specified IP address and mask.
- pool-name
-
Clears statistics for the specified pool name.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
subnet-stats
subnet-stats
Syntax
subnet-stats ip-address[/mask]
subnet-stats pool pool-name
Context
[Tree] (show>router>dhcp>server subnet-stats)
Full Context
show router dhcp local-dhcp-server subnet-stats
Description
This command displays subnet statistics.
Parameters
- ip-address[/mask]
-
Specifies the subnet and mask.
- pool-name
-
Specifies the name of local DHCPv4 server pool.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subnet statistics information.
Output Example*A:SUB-Dut-A# show router dhcp local-dhcp-server dhcpS2 subnet-stats pool POOL2
===============================================================================
Statistics for pool POOL2
===============================================================================
Subnet Free Offered Stable
FRPending RemPending Declined
-------------------------------------------------------------------------------
10.0.0.0/8 16384 0 0
0 0 0
-------------------------------------------------------------------------------
No. of entries: 1
===============================================================================
*A:SUB-Dut-A#
Output fields: subnet statistics pool describe the fields for subnet stats pool output.
|
Field |
Description |
|---|---|
|
Subnet |
The subnet address |
|
Free |
The number of addresses in this subnet that are free |
|
Offered |
The number of leases in this subnet that are in state offered |
|
Stable |
The number of leases in this subnet that are in state stable |
|
FRPending |
The number of leases in this subnet that are in state forceRenewPending |
|
RemPending |
The number of leases in this subnet that are in state removePending |
|
Declined |
The number of addresses in this subnet that are declined |
|
No. of entries |
The total number of entries |
subscribe-to
subscribe-to
Syntax
subscribe-to log-id log-id
Context
[Tree] (tools>perform>log subscribe-to)
Full Context
tools perform log subscribe-to
Description
This command subscribes the current CLI session to the specified CLI log. Log events for the specified log will be output in the current CLI session until the CLI session closes or an unsubscribe-from command is used.
Parameters
- log-id
-
Specifies the log ID for which subscription is requested.
Platforms
All
subscriber
subscriber
Syntax
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [scheduler scheduler-name] [spi-sharing-type spi-sharing-type] [spi-sharing-id spi-sharing-id]
subscriber sub-ident-string [scheduler scheduler-name] [ingress | egress]
Context
[Tree] (clear>qos>scheduler-stats subscriber)
Full Context
clear qos scheduler-stats subscriber
Description
This command clears scheduler stats by subscriber.
Parameters
- sub-ident-string
-
Clears information for the specified subscriber name.
- sap-id
-
Clears information for the specified SAP.
- sla-profile-name
-
Clears information for the specified SLA profile name.
- scheduler-name
-
Clears information for the specified scheduler.
- spi-sharing-type
-
Clears information for sessions with the specified SPI sharing type.
- spi-sharing-id
-
Clears information for sessions with the specified SPI sharing type and sharing identifier. The SPI group identifier is:
-
an identifier when the sharing type is per-group
-
an internal PPP or IPoE sharing identifier when the sharing type is a per-PPP or per-IPoE session
-
- egress
-
Clears egress information for the subscriber.
- ingress
-
Clears ingress information for the subscriber.
Platforms
All
subscriber
Syntax
subscriber sub-ident-string
Context
[Tree] (clear>service>statistics subscriber)
Full Context
clear service statistics subscriber
Description
This command clears the statistics for a particular subscriber.
Parameters
- sub-ident-string
-
Clears statistics for the specified subscriber identification string.
Platforms
All
subscriber
Syntax
subscriber sub-ident-string
subscriber sub-ident-string detail
subscriber sub-ident-string mirror
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [spi-sharing-type spi-sharing-type] [spi-sharing-id spi-sharing-id]
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [spi-sharing-type spi-sharing-type] [spi-sharing-id spi-sharing-id] detail
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [spi-sharing-type spi-sharing-type] [spi-sharing-id spi-sharing-id] mirror
Context
[Tree] (show>service>active-subscribers subscriber)
Full Context
show service active-subscribers subscriber
Description
This command displays active subscriber information for a subscriber.
Parameters
- sub-ident-string
-
Displays the subscriber ID of the active subscriber, up to 32 characters.
- sap-id
-
Displays the physical port identifier portion of the SAP definition.
- sla-profile-name
-
Displays the existing SLA profile name, up to 32 characters.
- spi-sharing-type
-
Displays subscriber information for sessions with the specified SPI sharing type.
- spi-sharing-id
-
Displays subscriber information for sessions with the specified SPI sharing type and sharing identifier. The SPI group ID is:
-
a group id when sharing type is per-group
-
an internal PPP or IPoE sharing id when the sharing type is per-PPP or per-IPoE session
-
- detail
-
Displays detailed output.
- mirror
-
Displays mirrored output.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subscriber information for active subscribers.
Output Example*A:eng-BNG-2# show service active-subscribers subscriber "user_1"
===============================================================================
Active Subscribers
===============================================================================
-------------------------------------------------------------------------------
Subscriber user_1
(no-prof)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(1) SLA Profile Instance sap:1/1/20:841 - sla:no-prof
-------------------------------------------------------------------------------
IP Address
MAC Address Session Origin Svc Fwd
-------------------------------------------------------------------------------
192.168.0.14
00:00:10:10:12:13 N/A DHCP 1000 Y
-------------------------------------------------------------------------------
===============================================================================
subscriber
Syntax
subscriber sub-ident-string [{ingress | egress}] [{detail | root-detail | thresholds | priority-info | depth}] [port port-id] [ arbiter {name | root}]
Context
[Tree] (show>qos>policer-hierarchy subscriber)
Full Context
show qos policer-hierarchy subscriber
Description
This command displays information about the policer hierarchy per subscriber.
Parameters
- sub-ident-string
-
Displays information about the specified subscriber.
- ingress
-
Displays ingress information about the specified subscriber.
- egress
-
Displays egress information about the specified subscriber.
- detail
-
Displays detailed information.
- root-detail
-
Displays detailed information about the arbiter root.
- thresholds
-
Displays threshold, parenting, rate, and traffic information related to a policer.
- priority-info
-
Displays threshold information related to the root arbiter.
- depth
-
Displays bucket depth, parenting, rate, and traffic information related to a policer.
- port-id
-
Displays information about the specified port.
- name
-
Displays information about the named QoS arbiter.
- root
-
Displays information about the arbiter root.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
subscriber
Syntax
subscriber sub-ident-string [scheduler scheduler-name] [{ingress | egress}] [detail]
subscriber sub-ident-string sla-profile sla-profile-name sap sap-id [ scheduler scheduler-name] [detail] [ spi-sharing-type spi-sharing-type] [ spi-sharing-id spi-sharing-id]
Context
[Tree] (show>qos>scheduler-hierarchy subscriber)
Full Context
show qos scheduler-hierarchy subscriber
Description
This command displays the scheduler hierarchy per subscriber.
Parameters
- sub-ident-string
-
Displays the subscriber identification policy name.
- scheduler-name
-
Displays the scheduler name.
- ingress
-
Displays ingress SAP subscriber scheduler stats.
- egress
-
Displays egress SAP subscriber scheduler stats.
- detail
-
Displays detailed information.
- sla-profile-name
-
Displays information for the specified sla-profile-name.
- spi-sharing-type
-
Displays subscriber scheduler hierarchy information for sessions with the specified SLA Profile Instance sharing type.
- spi-sharing-id
-
Displays subscriber scheduler hierarchy information for sessions with the specified SLA Profile Instance sharing type and sharing identifier. The spi-sharing-id is:
-
a group id when sharing type is per-group
-
an internal PPP or IPoE sharing id when the grouping type is per-PPP or per-IPoE-session
-
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
Output
The following output is an example of QoS scheduler hierarchy subscriber information, and Output fields: QoS scheduler hierarchy subscriber describes the QoS scheduler hierarchy subscriber fields.
Output Example*A:PE# show qos scheduler-hierarchy subscriber "sub1"
===============================================================================
Scheduler Hierarchy - Subscriber sub1
===============================================================================
Ingress Scheduler Policy: basic-upstream-policy
Egress Scheduler Policy : basic-downstream-policy
-------------------------------------------------------------------------------
Root (Ing)
| slot(1)
|--(S) : basic-upstream
| |
| |--(Q) : Sub=sub1:basic-sla 200->1/1/1:1->2 1-1
| |
| |--(Q) : Sub=sub1:basic-sla 200->1/1/1:1->1 1-1
| |
Root (Egr)
| slot(1)
|--(S) : basic-downstream (Port 1/1/1)
| |
| |--(Q) : Sub=sub1:basic-sla 200->1/1/1:1->1
| |
|
===============================================================================
*A:PE#
*A:PE# show qos scheduler-hierarchy subscriber "sub1" detail
===============================================================================
Scheduler Hierarchy - Subscriber sub1
===============================================================================
Ingress Scheduler Policy: basic-upstream-policy
Egress Scheduler Policy : basic-downstream-policy
-------------------------------------------------------------------------------
Legend :
(*) real-time dynamic value
(w) Wire rates
B Bytes
-------------------------------------------------------------------------------
Root (Ing)
| slot(1)
|--(S) : basic-upstream
| | AdminPIR:max AdminCIR:0(sum)
| | Limit Unused Bandwidth: disabled
| |
| |
| | [Within CIR Level 0 Weight 0]
| | Assigned:0 Offered:0
| | Consumed:0
| |
| | [Above CIR Level 0 Weight 0]
| | Assigned:0 Offered:0
| | Consumed:0
| |
| |
| | TotalConsumed:0
| | OperPIR:max
| |
| | [As Parent]
| | Rate:max
| | ConsumedByChildren:0
| |
| |
| |--(Q) : Sub=sub1:basic-sla 200->1/1/1:1->2 1-1
| | | AdminPIR:1000000 AdminCIR:0
| | | Parent Limit Unused Bandwidth: not-found
| | | CBS:31457280 B
| | | MBS:51904512 B
| | | Depth:0 B
| | | HighPlus Drop Tail:51904512 B
| | | High Drop Tail:51904512 B
| | | Low Drop Tail:46399488 B
| | | Exceed Drop Tail:40894464 B
| | |
| | | [Within CIR Level 0 Weight 1]
| | | Assigned:0 Offered:0
| | | Consumed:0
| | |
| | | [Above CIR Level 1 Weight 1]
| | | Assigned:1000000 Offered:0
| | | Consumed:0
| | |
| | | TotalConsumed:0
| | | OperPIR:max OperCIR:0
| | | OperFIR:0
| | |
| | | PktByteOffset:add 0*
| | | OnTheWireRates:false
| | | ATMOnTheWireRates:false
| | | LastMileOnTheWireRates:false
| |
| |--(Q) : Sub=sub1:basic-sla 200->1/1/1:1->1 1-1
| | | AdminPIR:10000 AdminCIR:0
| | | Parent Limit Unused Bandwidth: not-found
| | | CBS:10420224 B
| | | MBS:20840448 B
| | | Depth:0 B
| | | HighPlus Drop Tail:20840448 B
| | | High Drop Tail:20840448 B
| | | Low Drop Tail:20840448 B
| | | Exceed Drop Tail:16515072 B
| | |
| | | [Within CIR Level 0 Weight 1]
| | | Assigned:0 Offered:0
| | | Consumed:0
| | |
| | | [Above CIR Level 1 Weight 1]
| | | Assigned:10000 Offered:0
| | | Consumed:0
| | |
| | | TotalConsumed:0
| | | OperPIR:10000 OperCIR:0
| | | OperFIR:0
| | |
| | | PktByteOffset:add 0*
| | | OnTheWireRates:false
| | | ATMOnTheWireRates:false
| | | LastMileOnTheWireRates:false
| |
Root (Egr)
| slot(1)
|--(S) : basic-downstream (Port 1/1/1)
| | AdminPIR:max AdminCIR:0(sum)
| | Parent Limit Unused Bandwidth: not-found
| |
| | AvgFrmOv:100.00
| | AdminPIR:max(w) AdminCIR:0(w)
| |
| | [Within CIR Level 0 Weight 0]
| | Assigned:0(w) Offered:0(w)
| | Consumed:0(w)
| |
| | [Above CIR Level 1 Weight 1]
| | Assigned:1000000(w) Offered:0(w)
| | Consumed:0(w)
| |
| |
| | TotalConsumed:0(w)
| | OperPIR:1000000
| |
| | [As Parent]
| | Rate:1000000
| | ConsumedByChildren:0
| |
| |
| |--(Q) : Sub=sub1:basic-sla 200->1/1/1:1->1
| | | AdminPIR:1000000 AdminCIR:0
| | | Parent Limit Unused Bandwidth: not-found
| | | AvgFrmOv:100.00
| | | CBS:0 B
| | | MBS:1253376 B
| | | Depth:0 B
| | | HighPlus Drop Tail:1253376 B
| | | High Drop Tail:1253376 B
| | | Low Drop Tail:1253376 B
| | | Exceed Drop Tail:983040 B
| | |
| | | [Within CIR Level 0 Weight 1]
| | | Assigned:0 Offered:0
| | | Consumed:0
| | |
| | | [Above CIR Level 1 Weight 1]
| | | Assigned:1000000 Offered:0
| | | Consumed:0
| | |
| | | TotalConsumed:0
| | | OperPIR:max OperCIR:0
| | |
| | | PktByteOffset:add 0*
| | | OnTheWireRates:false
| | | ATMOnTheWireRates:false
| | | LastMileOnTheWireRates:false
| |
|
===============================================================================
*A:PE#
|
Label |
Description |
|---|---|
|
Legend |
Admin CIR/PIR: Specifies the configured value of CIR/PIR. Assigned CIR/PIR: Specifies the PIR/CIR rate given to a member by that parent level. Offered CIR/PIR: Specifies the offered load on that member. Consumed CIR/PIR: Specifies the amount of scheduler bandwidth used by this member. |
|
PIR |
Specifies the PIR rate. |
|
CIR |
Specifies the CIR rate. |
|
S |
Displays the scheduler name. |
|
Q |
Displays the queue ID and information. |
subscriber
Syntax
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [scheduler scheduler-name] [spi-sharing-type spi-sharing-type] [spi-sharing-id spi-sharing-id]
subscriber sub-ident-string [scheduler scheduler-name] [{ingress | egress}]
Context
[Tree] (show>qos>scheduler-stats subscriber)
Full Context
show qos scheduler-stats subscriber
Description
This command displays scheduler statistics information.
Parameters
- sub-ident-string
-
Specifies an existing SLA profile string.
- scheduler-name
-
Specifies an existing scheduler name.
- ingress
-
Display only the policy displayed on ingress.
- egress
-
Display only the policy displayed on egress.
- sla-profile-name
-
Displays information for the specified sla-profile-name.
- spi-sharing-type
-
Displays subscriber scheduler hierarchy information for sessions with the specified SLA Profile Instance sharing type.
- spi-sharing-id
-
Displays subscriber scheduler hierarchy information for sessions with the specified SLA Profile Instance sharing type and sharing identifier. The spi-sharing-id is:
-
a group id when sharing type is per-group
-
an internal PPP or IPoE sharing id when the sharing type is per-PPP or per-IPoE-session
-
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
Output
The following output is an example of QoS scheduler-stats subscriber information, and Output fields: QoS scheduler statistics subscriber describes the QoS scheduler-stats subscriber fields.
Output ExampleA:D# show qos scheduler-stats subscriber RoutedCoHost1
===============================================================================
Scheduler Stats
===============================================================================
Scheduler Forwarded Packets Forwarded Octets
-------------------------------------------------------------------------------
Ingress Schedulers
gp 0 0
Egress Schedulers
gp 0 0
mb 0 0
mbs 0 0
pb 0 0
pbs 0 0
rb 0 0
rbs 0 0
===============================================================================
*A:D#
|
Label |
Description |
|---|---|
|
Scheduler |
Displays the scheduler policy name. |
|
Forwarded Packets |
Displays the number of packets forwarded. |
|
Forwarded Octet |
Displays the number of octets forwarded. |
subscriber
Syntax
subscriber sub-indent-string [egress] [detail]
Context
[Tree] (show>qos>agg-rate subscriber)
Full Context
show qos agg-rate subscriber
Description
This command displays the H-QoS aggregate rate limit per subscriber.
Parameters
- sub-indent-string
-
Specifies the subscriber identification string of the subscriber.
- egress
-
Displays egress SAP customer scheduler stats.
- detail
-
Displays detailed information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
Output
The following output is an example of H-QoS aggregate rate limit per subscriber, and Output fields: H-QoS aggregate rate limit per subscriber describes the H-QoS aggregate rate limit per subscriber fields.
Output Example*A:PE1# show qos agg-rate subscriber "sub1" egress
===============================================================================
Aggregate Rate Information - Subscriber sub1
===============================================================================
-------------------------------------------------------------------------------
Root (Egr)
| slot(1)
| AdminRate : 1000
| OperRate : 0
| Limit Unused Bandwidth : disabled
| OnTheWireRates : false
| LastMileOnTheWireRates : false
|
|--(Q) : Sub=sub1:basic-sla 1->1/1/1:1->1 (Port 1/1/1)
|
===============================================================================
*A:PE#
|
Label |
Description |
|---|---|
|
AdminRate |
Displays the configured aggregate rate in the subscriber profile. |
|
OperRate |
Displays the actual downstream rate. |
|
Limit Unused Bandwidth |
Indicates whether the limit-unused-bandwidth command is enabled to protect against exceeding the aggregated bandwidth |
|
OnTheWireRates |
Indicates whether the displayed rates are on-the-wire rates. |
|
LastMileOnTheWireRates |
Indicates whether the displayed rates are on-the-wire rates for the last mile only. |
subscriber
Syntax
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [repeat repeat] [ absolute | rate] [base]
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [repeat repeat] [ absolute | rate] egress-policer-id egress-policer-id
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [repeat repeat] [ absolute | rate] egress-queue-id egress-queue-id
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [repeat repeat] [ absolute | rate] ingress-policer-id ingress-policer-id
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [repeat repeat] [ absolute | rate] ingress-queue-id ingress-queue-id
Context
[Tree] (monitor>service subscriber)
Full Context
monitor service subscriber
Description
This command monitors statistics for a subscriber.
Parameters
- sub-ident-string
-
Specifies an existing subscriber identification profile to monitor, up to 32 characters.
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- sla-profile-name
-
Specifies an existing SLA profile. The name can be a maximum of 32 characters long.
- seconds
-
Configures the interval for each display, in seconds.
- repeat
-
Configures how many times the command is repeated.
- absolute
-
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
-
Displays rate-per-second for each statistic instead of the delta.
- base
-
Monitor base statistics.
- egress-policer-id
-
Monitors statistics for the policer.
- egress-queue-id
-
Monitors statistics for this queue.
- ingress-policer-id
-
Monitors statistics for this policer.
- ingress-queue-id
-
Monitors statistics for this queue.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subscriber-information.
Output ExampleA:Dut-A# monitor service subscriber nokia_100 sap 1/2/1:101 sla-profile sla_
default
===============================================================================
Monitor statistics for Subscriber nokia_100
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
SLA Profile Instance statistics
-------------------------------------------------------------------------------
Packets Octets
Off. HiPrio : 0 0
Off. LowPrio : 94531 30704535
Off. Uncolor : 0 0
Queueing Stats (Ingress QoS Policy 1000)
Dro. HiPrio : 0 0
Dro. LowPrio : 7332 2510859
For. InProf : 0 0
For. OutProf : 87067 28152288
Queueing Stats (Egress QoS Policy 1000)
Dro. InProf : 880 127660
Dro. OutProf : 0 0
For. InProf : 90862 12995616
For. OutProf : 0 0
-------------------------------------------------------------------------------
SLA Profile Instance per Queue statistics
-------------------------------------------------------------------------------
Packets Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Ingress Queue 2 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LowPrio : 94531 30704535
Off. Uncolor : 0 0
Dro. HiPrio : 0 0
Dro. LowPrio : 7332 2510859
For. InProf : 0 0
For. OutProf : 87067 28152288
Ingress Queue 3 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Ingress Queue 11 (Multipoint) (Priority)
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 1
Dro. InProf : 880 127660
Dro. OutProf : 0 0
For. InProf : 90862 12995616
For. OutProf : 0 0
Egress Queue 2
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 3
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
===============================================================================
A:Dut-A#
A:Dut-A# monitor service subscriber nokia_100 sap 1/2/1:101 sla-
profile sla_default base rate
===============================================================================
Monitor statistics for Subscriber nokia_100
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
SLA Profile Instance statistics
-------------------------------------------------------------------------------
Packets Octets
Off. HiPrio : 0 0
Off. LowPrio : 109099 35427060
Off. Uncolor : 0 0
Queueing Stats (Ingress QoS Policy 1000)
Dro. HiPrio : 0 0
Dro. LowPrio : 8449 2894798
For. InProf : 0 0
For. OutProf : 100523 32489663
Queueing Stats (Egress QoS Policy 1000)
Dro. InProf : 880 127660
Dro. OutProf : 0 0
For. InProf : 105578 15104553
For. OutProf : 0 0
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Rate)
-------------------------------------------------------------------------------
SLA Profile Instance statistics
-------------------------------------------------------------------------------
Packets Octets % Port
Util.
Off. HiPrio : 0 0 0.00
Off. LowPrio : 1469 477795 0.38
Off. Uncolor : 0 0 0.00
Queueing Stats (Ingress QoS Policy 1000)
Dro. HiPrio : 0 0 0.00
Dro. LowPrio : 119 40691 0.03
For. InProf : 0 0 0.00
For. OutProf : 1349 437350 0.34
Queueing Stats (Egress QoS Policy 1000)
Dro. InProf : 0 0 0.00
Dro. OutProf : 0 0 0.00
For. InProf : 1469 209129 0.16
For. OutProf : 0 0 0.00
===============================================================================
A:Dut-A#
A:Dut-A# monitor service subscriber nokia_100 sap 1/2/1:101 sla-
profile sla_ default ingress-queue-id 1
===============================================================================
Monitor statistics for Subscriber nokia_100
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Packets Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
===============================================================================
A:Dut-A#
A:Dut-A# monitor service subscriber nokia_100 sap 1/2/1:101 sla-profile
sla_default egress-queue-id 1
===============================================================================
Monitor statistics for Subscriber nokia_100
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Packets Octets
Egress Queue 1
Dro. InProf : 880 127660
Dro. OutProf : 0 0
For. InProf : 164366 23506178
For. OutProf : 0 0
===============================================================================
A:Dut-A#
subscriber
Syntax
subscriber sub-ident-string [arbiter {root | name}] [ingress | egress] [interval seconds] [repeat repeat] [absolute | rate]
Context
[Tree] (monitor>qos>arbiter-stats subscriber)
Full Context
monitor qos arbiter-stats subscriber
Description
This command monitors arbiter statistics for a subscriber.
Parameters
- sub-ident-string
-
Specifies an existing subscriber identification policy name, up to 32 characters.
- name
-
Specifies the name of the policer control policy arbiter.
- root
-
Specifies the arbiter to which this queue would be feeding.
- ingress
-
Displays arbiter name statistics applied on the ingress SAP.
- egress
-
Displays arbiter name statistics applied on the egress SAP.
- seconds
-
Configures the interval for each display in seconds.
- repeat
-
Configures how many times the command is repeated.
- absolute
-
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
-
Displays rate-per-second for each statistic instead of the delta.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
subscriber
Syntax
subscriber sub-ident-string [scheduler scheduler-name] [ ingress | egress] [interval seconds] [ repeat repeat] [absolute | rate]
subscriber sub-ident-string [interval seconds] [repeat repeat] [absolute | rate] sap sap-id sla-profile sla-profile-name
Context
[Tree] (monitor>qos>scheduler-stats subscriber)
Full Context
monitor qos scheduler-stats subscriber
Description
This command monitors scheduler statistics for a subscriber.
Parameters
- sub-ident-string
-
Specifies an existing subscriber identification policy name, up to 32 characters.
- scheduler-name
-
Specifies an existing QoS scheduler policy name, up to 32 characters. Scheduler names are configured in the config>qos>scheduler-policy>tier level context.
- ingress
-
Displays scheduler-name statistics applied on the ingress SAP.
- egress
-
Displays scheduler-name statistics applied on the egress SAP.
- seconds
-
Configures the interval for each display in seconds.
- repeat
-
Configures how many times the command is repeated.
- absolute
-
Displays raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
-
Displays rate-per-second for each statistic instead of the delta.
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- sla-profile-name
-
Specifies the SLA profile belonging to the subscriber host, up to 32 characters.
Platforms
All
subscriber
Syntax
subscriber sub-ident-string [arbiter {name | root}] [ingress | egress]
Context
[Tree] (clear>qos>arbiter-stats subscriber)
Full Context
clear qos arbiter-stats subscriber
Description
This command clears the arbiter statistics per subscriber.
Parameters
- sub-ident-string
-
Specifies the subscriber identification policy name, up to 32 characters.
- name
-
Specifies the arbiter name, up to 32 characters.
- root
-
Specifies the arbiter root, up to 32 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
subscriber
Syntax
subscriber id subscriber-id [statistics]
subscriber all [statistics]
Context
[Tree] (clear>subscr-mgmt>host-tracking subscriber)
Full Context
clear subscriber-mgmt host-tracking subscriber
Description
This command clears the host tracking data for a subscriber.
Parameters
- subscriber-id
-
Specifies subscriber ID, up to 32 characters.
- all
-
Clears all host tracking data.
- statistics
-
Clears statistical host tracking information for the specified subscriber ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
subscriber
Syntax
subscriber sub-ident-string [arbiter name | root] [ingress | egress]
Context
[Tree] (show>qos>arbiter-stats subscriber)
Full Context
show qos arbiter-stats subscriber
Description
This command displays the arbiter statistics per subscriber.
Parameters
- sub-ident-string
-
Displays information about the specified subscriber, up to 32 characters for the 7950 XRS and VSR platforms and up to 64 characters for all other platforms.
- name
-
Specifies the arbiter name, up to 32 characters.
- root
-
Specifies the arbiter root, up to 32 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
subscriber
Syntax
subscriber sub-ident-string [sla-profile sla-profile-name] [ingress | egress] [detail] [ port port-id]
Context
[Tree] (show>qos>policer subscriber)
Full Context
show qos policer subscriber
Description
This command displays the policer statistics per port.
Parameters
- sub-ident-string
-
Displays information about the specified subscriber, up to 32 characters for the 7950 XRS and VSR platforms and up to 64 characters for all other platforms.
- sla-profile-name
-
Specifies the queue group name, up to 32 characters.
- port-id
-
Displays information about the specified port.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR
subscriber-hosts
subscriber-hosts
Syntax
subscriber-hosts
Context
[Tree] (clear>service>id subscriber-hosts)
Full Context
clear service id subscriber-hosts
Description
Commands in this context clear information for a particular subscriber host.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
subscriber-hosts
Syntax
subscriber-hosts [sap sap-id] [ip ip-prefix/prefix-length] [mac ieee-address] [ sub-profile sub-profile-name] [sla-profile sla-profile-name] [ app-profile app-profile-name] [wholesaler service-id] [address-origin address-origin] [detail] [ statistics] [spi-sharing-type spi-sharing-type] [spi-sharing-id spi-sharing-id]
Context
[Tree] (show>service>id subscriber-hosts)
Full Context
show service id subscriber-hosts
Description
This command displays subscriber host information.
Parameters
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- ip-prefix/prefix-length
-
Shows information for the specified IP address and mask.
- ieee-address
-
Displays information only for the specified 48-bit MAC address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd- ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
- sub-profile-name
-
Displays an existing subscriber profile name to be associated with the static subscriber host. The subscriber profile is configured in the config>subscr-mgmt>sub-profile context.
- sla-profile-name
-
Displays subscriber host information for hosts with the specified SLA profile name.
- app-profile-name
-
Specifies an existing SLA app profile name, up to 32 characters.
- service-id
-
Specifies the ID that uniquely identifies a service.
- address-origin
-
Specifies an address origin.
- detail
-
Displays detailed information.
- statistics
-
Displays the HTTP redirect statistics for the host. The redirect statistics are divided into HTTP GET and HTTP response for redirection.
- spi-sharing-type
-
Displays subscriber host information for hosts with the specified SPI sharing type.
- spi-sharing-id
-
Displays subscriber host information for hosts with the specified SPI sharing type and sharing identifier. The SPI group ID is:
-
a sharing ID when the sharing type is per-group
-
an internal PPP or IPoE sharing ID when the sharing type is per-PPP or per-IPoE session
-
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of subscriber host information.
Output Example*A:Dut-C># show service id 3 subscriber-hosts
=============================================================
Subscriber Host table
=============================================================
Sap Subscriber
IP Address
MAC Address PPPoE-SID Origin Fwding State
-------------------------------------------------------------
2/1/5:2 TEACAHEH74
10.11.1.61
00:80:00:00:00:0a N/A ARP-Host Fwding
[pw-11:11] VIACAHEH74
10.11.1.2
00:00:11:11:01:02 N/A ARP-Host Fwding
[pw-11:12] pw-11:12
10.11.1.3
00:00:11:11:01:03 N/A ARP-Host Fwding
[pw-11:13] pw-11:13
10.11.1.4
00:00:11:11:01:04 N/A ARP-Host Fwding
[pw-22:22] XMACAHEH74
10.22.1.2
00:00:22:22:01:02 N/A ARP-Host Fwding
[pw-33:33] IUASAHEH74
10.33.1.2
00:00:33:33:01:02 N/A ARP-Host Fwding
-------------------------------------------------------------
Number of subscriber hosts: 6
=============================================================
*A:Dut-C>#
A:Dut-A# show service id 100 subscriber-hosts ip 10.100.1.5
===============================================================================
Subscriber Host table
===============================================================================
Sap IP Address MAC Address Origin(*) Subscriber
-------------------------------------------------------------------------------
1/2/1:102 10.100.1.5 00:10:00:00:00:03 -/D/- nokia_100
-------------------------------------------------------------------------------
Number of subscriber hosts : 1
===============================================================================
(*) S=Static Host, D=DHCP Lease, N=Non-Sub-Traffic
A:Dut-A#
The following table describes show service-id subscriber hosts output fields:
|
Label |
Description |
|---|---|
|
Sap |
The physical port identifier portion of the SAP definition. |
|
IP Address |
The IP address |
|
MAC Address |
The MAC address |
|
PPPoE-SID |
The PPPoE-SID of the originating subscriber |
|
Origin Subscriber |
The ID of the originating subscriber |
|
Fwding State |
The forwarding state |
|
Number of subscriber hosts |
The number of subscriber hosts |
subscriber-identification
subscriber-identification
Syntax
subscriber-identification
Context
[Tree] (show>router>nat subscriber-identification)
Full Context
show router nat subscriber-identification
Description
This command displays the NAT subscriber identification information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
subscriber-identification
Syntax
subscriber-identification subscriber-string subscriber-string
Context
[Tree] (clear>nat subscriber-identification)
Full Context
clear nat subscriber-identification
Description
This command clears NAT subscriber identification information.
Parameters
- subscriber-string
-
Specifies the subscriber identification string, up to 64 characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
subscriber-mgmt
subscriber-mgmt
Syntax
subscriber-mgmt
Context
[Tree] (clear subscriber-mgmt)
Full Context
clear subscriber-mgmt
Description
This command enables the contect to clear subscriber management data.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
subscriber-mgmt
Syntax
subscriber-mgmt
Context
[Tree] (tools>perform subscriber-mgmt)
Full Context
tools perform subscriber-mgmt
Description
This command enables tools to control subscriber management.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
subscriber-mgmt
Syntax
subscriber-mgmt
Context
[Tree] (tools>dump subscriber-mgmt)
Full Context
tools dump subscriber-mgmt
Description
Commands in this context display subscriber management resources.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
subscriber-mgmt
Syntax
subscriber-mgmt
Context
[Tree] (show subscriber-mgmt)
Full Context
show subscriber-mgmt
Description
Commands in this context display subscriber management statistics.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
subscriber-using
subscriber-using
Syntax
subscriber-using [service-id service-id] [ sap-id sap-id] [interface ip-int-name] [ ip ip-address[/mask]] [mac ieee-address] [sub-profile sub-profile-name] [ sla-profile sla-profile-name] [app-profile app-profile-name] [ port port-id] [no-inter-dest-id | inter-dest-id intermediate-destination-id]
Context
[Tree] (show>service subscriber-using)
Full Context
show service subscriber-using
Description
This command displays selective subscriber information using specific options.
Parameters
- service-id
-
Specifies the ID that uniquely identifies a service.
- sap-id
-
Displays the physical port identifier portion of the SAP definition.
- ip-int-name
-
Shows DHCP statistics on the specified interface.
- port-id
-
Indicates the SAP or SDP for which this entry contains information.
- ip-address[/mask]
-
Shows information for the specified IP address and mask.
- ieee-address
-
Displays information only for the specified 48-bit MAC address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd- ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
- sub-profile-name
-
Displays an existing subscriber profile name to be associated with the static subscriber host. The subscriber profile is configured in the config>subscr-mgmt>sub-profile context.
- sla-profile-name
-
Specifies an existing SLA profile name.
- app-profile-name
-
Displays the profile of the specified application.
- intermediate-destination-id
-
Indicates the intermediate destination identifier received from either the DHCP or RADIUS server, or the local user database.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of selective subscriber information.
Output ExampleA:Dut-A# show service subscriber-using service-id 100
=================================================================
Subscribers
=================================================================
Subscriber Sub Profile
-----------------------------------------------------------------
nokia_100 sub_prof100
-----------------------------------------------------------------
Matching Subscribers : 1
=================================================================
A:Dut-A#
A:Dut-A# show service subscriber-using
=================================================================
Subscribers
=================================================================
Subscriber Sub Profile
-----------------------------------------------------------------
nokia_100 sub_prof100
nokia_110 sub_prof110
nokia_120 sub_prof120
nokia_130 sub_prof130
nokia_80 sub_prof80
nokia_90 sub_prof90
client_PC1 sub_profPC1
static sub_default
-----------------------------------------------------------------
Matching Subscribers : 8
=================================================================
A:Dut-A#
Output fields: subscriber using service ID describes subscriber using a specified service ID field descriptions.
|
Field |
Description |
|---|---|
|
Subscriber |
The subscriber name |
|
Sub Profile |
The subscriber profile name |
|
Matching Subscribers |
The number of subscribers matching the search criteria |
subscription
subscription
Syntax
subscription subscription-id [paths]
subscription
Context
[Tree] (show>system>telemetry>grpc subscription)
Full Context
show system telemetry grpc subscription
Description
This command displays the active telemetry gRPC subscriptions.
Parameters
- subscription-id
-
Specifies the unique subscription ID or number that is assigned by the SR OS gRPC server to each active telemetry subscription.
- paths
-
Keyword that indicates that the show command output includes all paths with the respective subscription ID information.
Platforms
All
Output
The following output is an example of the telemetry gRPC subscription information, and Output fields: telemetry gRPC subscription describes the output fields.
Output ExampleA:node-6>show>system>telemetry>grpc# subscription
===============================================================================
Telemetry gRPC subscriptions
===============================================================================
Id User Mode Port
Destination
-------------------------------------------------------------------------------
1 admin stream 49648
192.99.5.0
-------------------------------------------------------------------------------
No. of gRPC Telemetry subscriptions: 1
===============================================================================
A:node-6>show>system>telemetry>grpc# subscription 2
===============================================================================
Telemetry gRPC subscription
===============================================================================
Subscription-id : 2
User : admin
Destination : 192.168.110.252
Port : 54309
===============================================================================
A:node-6>show>system>telemetry>grpc# subscription 1 paths
===============================================================================
Telemetry gRPC subscription
===============================================================================
Subscription id : 1
User : admin
Destination : 192.99.5.0
Port : 49648
Subscription mode : stream
-------------------------------------------------------------------------------
Paths
-------------------------------------------------------------------------------
Path : /state/router[router-instance=*]/interface[interface-
name=*]/ipv4/oper-state
Path mode : on-change
Heartbeat interval : 10000 ms
Sample interval : 10000 ms
Finished samples : 1
Deferred samples : 0
Total collection time : 6 ms
Min collection time : 6 ms
Avg collection time : 6 ms
Max collection time : 6 ms
-------------------------------------------------------------------------------
No. of paths : 1
===============================================================================
|
Label |
Description |
|---|---|
|
Subscription id |
Displays the subscription ID |
| User |
Displays name of the user who started the subscription |
|
Destination |
Displays the destination IP address |
|
Port |
Displays the destination port |
|
Subscription mode |
once — Short-lived subscription that transmits a single sample stream — Long-lived subscription that transmits a sample at every interval |
|
Encoding |
Displays the encoding method used for telemetry notifications: bytes, json, json-ietf, proto |
|
Notification count |
Displays the notification count |
|
Context count |
Displays the context count |
|
Notification bundling |
Display the state of notification bundling. When enabled, additional statistics are displayed. |
|
Path |
Display the subscribed path |
|
Path mode |
Displays the path mode: on-change, sample, target-defined |
|
Heartbeart interval |
Displays the heartbeat interval |
|
Finished samples |
Displays the number of finished samples |
|
Deferred samples |
Displays the number of deferred samples |
|
Total collection time |
Displays the total collection time |
|
Min collection time |
Displays the minimum collection time |
|
Avg collection time |
Displays the average collection time |
|
Max collection time |
Displays the maximum collection time |
|
No. of paths |
Displays the total number of paths |
subscription
Syntax
subscription subscription-name [destinations | paths | scale-paths]
subscription
Context
[Tree] (show>system>telemetry>persistent subscription)
Full Context
show system telemetry persistent subscription
Description
This command displays the active persistent subscriptions.
Parameters
- subscription-name
-
Specifies the subscription name, up to 32 characters.
- destinations
-
Indicates that the output includes all destinations with the respective subscription name.
- paths
-
Indicates that the output includes all paths with the respective subscription name.
- scale-paths
-
Indicates that the output includes all scale paths with the respective subscription name.
Platforms
All
Output
The following output is an example of persistent subscription fields and Output fields: persistent subscription describes the output fields.
Output Example# show system telemetry persistent subscription
===============================================================================
Telemetry persistent subscriptions
===============================================================================
Name Admin Oper
-------------------------------------------------------------------------------
miro Disabled Down
-------------------------------------------------------------------------------
No. of persistent Telemetry subscriptions: 1
===============================================================================
# show system telemetry persistent subscription miro
===============================================================================
Telemetry persistent subscription
===============================================================================
Subscription Name : miro
Administrative State : Disabled
Operational State : Down
Oper Down Reason : TODO
Subscription Id : 0
Description :
Sensor Group : miro
Destination Group : miro
Path Mode : none
Sample Interval : 10000 ms
Encoding : json
===============================================================================
# show system telemetry persistent subscription miro destinations
===============================================================================
Telemetry persistent subscription
===============================================================================
Subscription Name : miro
Administrative State : Disabled
Operational State : Down
Oper Down Reason : TODO
Subscription Id : 0
Description :
Sensor Group : miro
Destination Group : miro
Path Mode : none
Sample Interval : 10000 ms
Encoding : json
-------------------------------------------------------------------------------
Destinations
-------------------------------------------------------------------------------
Destination : 1.1.1.1
Port : 57400
Operational State : Down
Oper Down Reason : TODO
Router Instance :
Establishment Time : 1970/01/01 00:00:00
Retry Count : 0
Operational Qos : be
Notification Count : 0
Total Notification Co*: 0
-------------------------------------------------------------------------------
No. of destinations : 1
* indicates that the corresponding row element may have been truncated.
===============================================================================
# show system telemetry persistent subscription miro paths
===============================================================================
Telemetry persistent subscription
===============================================================================
Subscription Name : miro
Administrative State : Disabled
Operational State : Down
Oper Down Reason : TODO
Subscription Id : 0
Description :
Sensor Group : miro
Destination Group : miro
Path Mode : none
Sample Interval : 10000 ms
Encoding : json
-------------------------------------------------------------------------------
Paths
-------------------------------------------------------------------------------
Path : miro
Finished Samples : 0
Deferred Samples : 0
Total Collection Time : 0 ms
Min Collection Time : 0 ms
Avg Collection Time : 0 ms
Max Collection Time : 0 ms
-------------------------------------------------------------------------------
No. of paths : 1
===============================================================================
|
Label |
Description |
|---|---|
|
Subscription Name |
Displays the name of the persistent subscription. |
|
Administrative State |
Enabled — The administrative state of the persistent subscription is enabled. Disabled — The administrative state of the persistent subscription is disabled. |
|
Operational State |
Up — The operational state of the persistent subscription is up. Down — The operational state of the persistent subscription is down. Transition — The persistent subscription is waiting for the delay-on-boot timer to expire. |
|
No. of persistent Telemetry subscriptions |
Displays the number of persistent telemetry subscriptions. |
|
Oper Down Reason |
Displays the reason for the operational down state. |
|
Subscription Id |
Displays the subscription ID. |
|
Description |
Displays the description information of the subscription. |
|
Sensor Group |
Displays the sensor group name. |
|
Destination Group |
Displays the destination group name. |
|
Path Mode |
Displays the path mode. |
|
Sample Interval |
Displays the sample interval. |
|
Encoding |
json — The encoding method used for telemetry notifications. bytes — The encoding method used for telemetry notifications. |
|
Destination |
Displays the destination IP address. |
|
Port |
Displays the destination port. |
|
Router Instance |
Displays the router instance. |
|
Establishment Time |
Displays the date and time of the destination establishment. |
|
Retry Count |
Displays the number of missed TCP keepalive probes before closing a TCP connection. |
|
Operational Qos |
Displays the QoS marking type. |
|
Notification Count |
Displays the notification count. |
|
Total Notification Co* |
Displays the total notification count. |
|
No. of destinations |
Displays the total number of configured destinations. |
|
Path |
Displays the path name. |
|
Finished Samples |
Displays the number of finished samples. |
|
Deferred Samples |
Displays the number of deferred samples. |
|
Total Collection Time |
Displays the total collection time. |
|
Min Collection Time |
Displays the minimum collection time. |
|
Avg Collection Time |
Displays the average collection time. |
|
Max Collection Time |
Displays the maximum collection time. |
|
No. of paths |
Displays the total number of configured paths. |
subscriptions
subscriptions
Syntax
subscriptions
Context
[Tree] (tools>dump>log subscriptions)
Full Context
tools dump log subscriptions
Description
This command displays the list of CLI logs to which each CLI session is currently subscribed.
Platforms
All
Output
The following output is an example, and Output fields: tools dump log subscriptions describes the output fields.
Output Example===============================================================================
CLI log subscriptions of all CLI sessions
===============================================================================
Session ID : 6
Type : console
User : admin
Login time : 19OCT2017 08:24:14
Remote IP address: 192.168.102.122
Log ID : 1
: 2
: 3
: 4
: 5
...
: 20
-------------------------------------------------------------------------------
Session ID : 25
Type : telnet
User : admin
Login time : 19OCT2017 08:33:16
Remote IP address: 192.168.102.138
Log ID : 1
: 2
===============================================================================
|
Label |
Description |
|---|---|
|
Session ID |
Specifies the session ID. |
|
Type |
Specifies the type of session (console, telnet, and so on). |
|
User |
Specifies the name of the user. |
|
Login time |
Specifies the time the user logged in. |
|
Remote IP address |
Specifies the originating (client side) IP address of the session. |
|
Log ID |
Specifies the log ID. |
summary
summary
Syntax
summary
Context
[Tree] (show>router>dhcp6>server summary)
[Tree] (show>router>dhcp>server summary)
Full Context
show router dhcp6 local-dhcp-server summary
show router dhcp local-dhcp-server summary
Description
This command displays DHCP or DHCP6 server summary information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of DHCP summary information.
Output Example*A:SUB-Dut-A# show router dhcp local-dhcp-server dhcpS2 summary
===============================================================================
DHCP server dhcpS2 router Base
===============================================================================
dhcpS2-POOL2
Admin State : inService
Persistency State : ok
User Data Base : N/A
Use gateway IP address : disabled
Send force-renewals : disabled
-------------------------------------------------------------------------------
Pool name : POOL2
-------------------------------------------------------------------------------
Subnet Free Stable Declined Offered Remove-pending
-------------------------------------------------------------------------------
10.0.0.0/8 16384 0 0 0 0
Totals for pool 16384 0 0 0 0
-------------------------------------------------------------------------------
Totals for server 16384 0 0 0 0
-------------------------------------------------------------------------------
Associations Admin
-------------------------------------------------------------------------------
No associations found
===============================================================================
*A:SUB-Dut-A#
*A:vsim-2# show router 500 dhcp local-dhcp-server "d4" summary
===============================================================================
DHCP server d4 router 500
===============================================================================
Admin State : inService
Operational State : inService
Persistency State : shutdown
User Data Base : N/A
Use gateway IP address : enabled (scope subnet)
Use pool from client : disabled
Send force-renewals : disabled
Creation Origin : manual
Lease Hold Time : 0h0m0s
Lease Hold Time For : N/A
User-ident : mac-circuit-id
Failover Admin State : outOfService
Failover Oper State : shutdown
Failover Persist Key : N/A
Administrative MCLT : 0h10m0s
Operational MCLT : 0h10m0s
Startup wait time : 0h2m0s
Partner down delay : 23h59m59s
Ignore MCLT : disabled
-------------------------------------------------------------------------------
Pool name : v4-1
-------------------------------------------------------------------------------
Failover Admin State : inService
Failover Oper State : normal
Failover Persist Key : N/A
Administrative MCLT : 0h10m0s
Operational MCLT : 0h10m0s
Startup wait time : 0h2m0s
Partner down delay : 23h59m59s
Ignore MCLT : disabled
-------------------------------------------------------------------------------
Subnet Free % Stable Declined Offered Rem-pend Drain
-------------------------------------------------------------------------------
10.20.20.0/24 (L) 10 90% 1 0 0 0 N
(R) N/A 0 N/A N/A N/A N
Totals for pool 10 90% 1 0 0 0
-------------------------------------------------------------------------------
Totals for server 10 90% 1 0 0 0
-------------------------------------------------------------------------------
Interface associations
Interface Admin
-------------------------------------------------------------------------------
l1 Up
-------------------------------------------------------------------------------
Local Address Assignment associations
Group interface Admin
-------------------------------------------------------------------------------
===============================================================================
*A:vsim-2#
summary
Syntax
summary
Context
[Tree] (show>router>dhcp summary)
[Tree] (show>router>dhcp6 summary)
Full Context
show router dhcp summary
show router dhcp6 summary
Description
This command displays the status of the DHCP6 relay and DHCP snooping functions on each interface.
Platforms
All
Output
The following outputs are examples of DHCP and DHCP6 summary information.
Output ExampleA:ALA-48>show>router>dhcp# summary
===================================================================
Interface Name Arp Used/ Info Admin
Populate Provided Option State
-------------------------------------------------------------------
ccaiesif No 0/0 Keep Down
ccanet6 No 0/0 Keep Down
iesBundle No 0/0 Keep Up
spokeSDP-test No 0/0 Keep Down
test No 0/0 Keep Up
test1 No 0/0 Keep Up
test2 No 0/0 Keep Up
testA No 0/0 Keep Up
testB No 0/0 Keep Up
testIES No 0/0 Keep Up
to-web No 0/0 Keep Up
-------------------------------------------------------------------
Interfaces: 11
===================================================================
A:ALA-48>show>router>dhcp#
*A:vsim-2# show router 500 dhcp summary
===============================================================================
DHCP Summary (Service: 500)
===============================================================================
Interface Name Arp Leases Per Interface/ Info Admin
SapId/Sdp Populate Per Sap Limit Option State
-------------------------------------------------------------------------------
g1 No 1/1 Keep Up
sap:1/1/7 1/1
l1 No 0/0 Keep Down
-------------------------------------------------------------------------------
Interfaces: 2
===============================================================================
*A:vsim-2#
Output fields: DHCP summary describes DHCP summary output field descriptions.
|
Label |
Description |
|---|---|
|
Interface Name |
The name of the router interface |
|
ARP Populate |
ARP populate is enabled or disabled |
|
Used/Provided |
The number of used and provided DHCP leases |
|
Info Option |
Option 82 processing is enabled or disabled on the interface |
|
Admin State |
The administrative state |
*A:vsim-2# show router 500 dhcp6 summary
===============================================================================
DHCP6 Summary (Service: 500)
===============================================================================
-------------------------------------------------------------------------------
Service Interfaces
-------------------------------------------------------------------------------
Interface Name Nbr Used/Max Relay Admin Oper Relay
SapId Resol. Used/Max Server Admin Oper Server
-------------------------------------------------------------------------------
l1 No 0/0 Down Down
0/8000 Down Down
-------------------------------------------------------------------------------
Interfaces: 1
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routed CO Interfaces
-------------------------------------------------------------------------------
Interface Name Used Admin (proxy/relay)
SapId
-------------------------------------------------------------------------------
g1 1 Down/Up
sap:1/1/7 1
-------------------------------------------------------------------------------
Interfaces: 1 1
-------------------------------------------------------------------------------
===============================================================================
*A:vsim-2#
*A:vsim-2# show router 500 dhcp6 local-dhcp-server "d6" summary
===============================================================================
DHCP server d6 router 500
===============================================================================
Admin State : inService
Operational State : inService
Persistency State : shutdown
Use Link Address : enabled (scope subnet)
Use pool from client : disabled
Creation Origin : manual
Lease Hold Time : 0h0m0s
Lease Hold Time For : N/A
User-ident : duid
Interface-id-mapping : disabled
Ignore-rapid-commit : disabled
Allow-lease-query : disabled
Failover Admin State : outOfService
Failover Oper State : shutdown
Failover Persist Key : N/A
Administrative MCLT : 0h10m0s
Operational MCLT : 0h10m0s
Startup wait time : 0h2m0s
Partner down delay : 23h59m59s
Ignore MCLT : disabled
-------------------------------------------------------------------------------
Pool name : v6-1
-------------------------------------------------------------------------------
Failover Admin State : inService
Failover Oper State : preNormal
Failover Persist Key : N/A
Time Left : 0h4m16s before state transition
Administrative MCLT : 0h10m0s
Operational MCLT : 0h10m0s
Startup wait time : 0h2m0s
Partner down delay : 23h59m59s
Ignore MCLT : disabled
-------------------------------------------------------------------------------
Prefix
Stable Declined Advert Rem-pend Drain
-------------------------------------------------------------------------------
2001:dead:1::/56
(L) 1 0 0 0 N
2001:dead:2::/56
(R) 0 0 0 0 N
Totals for pool 1 0 0 0
-------------------------------------------------------------------------------
Totals for server 1 0 0 0
-------------------------------------------------------------------------------
Interface associations
Interface Admin
-------------------------------------------------------------------------------
l1 Up
-------------------------------------------------------------------------------
Local Address Assignment associations
Group interface Admin
-------------------------------------------------------------------------------
===============================================================================
*A:vsim-2#
Output fields: DHCP6 summary describes DHCP6 summary output fields.
|
Label |
Description |
|---|---|
|
Interface Name |
The name of the router interface |
|
ARP Populate |
ARP populate is enabled or disabled |
|
Used/Provided |
The number of used and provided DHCP leases |
|
Info Option |
Option 82 processing enabled or disabled on the interface |
|
Admin State |
The administrative state |
summary
Syntax
summary [interface interface-name | saps]
Context
[Tree] (show>service>id>dhcp summary)
Full Context
show service id dhcp summary
Description
This command displays DHCP configuration summary information.
Parameters
- interface-name
-
Displays information for the specified IP interface.
- saps
-
Displays SAPs per interface.
Platforms
All
Output
The following output is an example of DHCP summary information, and Output fields: service ID DHCP summary describes the output fields.
Output ExampleA:ALA-49# show service id 1 dhcp summary
===============================================================================
DHCP Summary, service 1
===============================================================================
Interface Name Arp Used/ Info Admin
SapId/Sdp Populate Provided Option State
-------------------------------------------------------------------------------
SpokeSDP No 0/0 Keep Up
sdp:spoke-3:4 0/0
test No 0/0 Keep Up
sap:1/1/4:50/5 0/0
to-ce1 No 0/0 Keep Up
sap:1/1/10:1 0/0
-------------------------------------------------------------------------------
Interfaces: 3
===============================================================================
A:ALA-49#
|
Label |
Description |
|---|---|
|
Sap/Sdp |
The configuration identification, expressed by a string containing "card/mda/port/:logical-id”. |
|
Snoop |
Yes — The packets received from the DHCP clients were snooped. No — The packets received from the DHCP clients were not snooped. |
|
Used/Provided |
Used — The number of lease-states that are currently in use on a specific interface, that is, the number of clients on that interface got an IP address by DHCP. This value is always less than or equal to the 'Provided’ field. Provided — The lease-populate value that is configured for a specific interface. |
|
Arp Reply Agent |
Displays whether or not there is proper handling of received ARP requests from subscribers. |
|
Info Option |
Keep — The existing information is kept on the packet and the router does not add any additional information. Replace — On ingress, the existing information-option is replaced with the information-option from the router. Drop —The packet is dropped and an error is logged. |
|
Admin State |
Indicates the administrative state. |
summary
Syntax
summary
Context
[Tree] (show>service>id>ppp summary)
Full Context
show service id ppp summary
Description
This command displays PPP summary information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
summary
Syntax
summary
Context
[Tree] (show>subscr-mgmt>gtp summary)
Full Context
show subscriber-mgmt gtp summary
Description
This command displays a GTP system summary of information.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of GTP summary information.
Output ExampleNode# show subscriber-mgmt gtp summary
===============================================================================
GTP system summary
===============================================================================
Actual number of MME : 1
Actual number of ENODE-B : 1
Actual number of S11 Sessions : 1
Actual number of Mobile Gateways : 0
Actual number of Uplinks : 0
Actual number of Uplinks in Hold : 0
===============================================================================
summary
Syntax
summary
Context
[Tree] (show>service>id>pppoe summary)
Full Context
show service id pppoe summary
Description
This command displays PPPoE summary information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
summary
Syntax
summary
Context
[Tree] (show>service>id>ipoe summary)
Full Context
show service id ipoe summary
Description
This command displays a summary of IPoE information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
summary
Syntax
summary
Context
[Tree] (show>service>dynsvc summary)
Full Context
show service dynamic-services summary
Description
This command displays the global configuration summary for dynamic services:
-
Service range
-
Timers
This command is not available in the MD-CLI.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of dynamic service summary information.
Output Example# show service dynamic-services summary
===============================================================================
Dynamic Services Summary
===============================================================================
range start : 100000
range end : 200001
setup timeout Access Accept : 30
===============================================================================
Output fields: dynamic services summary describes Dynamic Services summary fields.
|
Output field |
Description |
|---|---|
|
range start |
The start service ID to define the service range for dynamic services. |
|
range end |
The start and end service ID to define the service range for dynamic services. |
|
setup timeout Access Accept |
The timeout, in seconds, after which a script is canceled for setup actions received via RADIUS Access-Accept messages. |
summary
Syntax
summary
Context
[Tree] (show>service>id>slaac summary)
Full Context
show service id slaac summary
Description
This command displays a summary of all SLAAC hosts.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
summary
Syntax
summary [sap sap-id]
Context
[Tree] (show>service>id>host-connectivity-verify summary)
Full Context
show service id host-connectivity-verify summary
Description
This command displays a host connectivity verification summary.
Parameters
- sap-id
-
Specifies the SAP ID to show statistics for.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
summary
Syntax
summary [all] [dns]
summary [family family] [ group name] [dns]
summary [family family] [ neighbor ip-address] [dns]
Context
[Tree] (show>router>bgp summary)
Full Context
show router bgp summary
Description
This command displays a summary of BGP neighbor information.
If confederations are not configured, that information is not displayed in the command output.
The "State” field displays the global BGP operational state. The valid values are:
-
Up — BGP global process is configured and running.
-
Down — BGP global process is administratively shutdown and not running.
-
Disabled — BGP global process is operationally disabled. The process must be restarted by the operator. For example, if a BGP peer is operationally disabled, the state in the summary table shows the state 'Disabled’.
Parameters
- all
-
Displays BGP peers in all instances.
- family
-
Specifies the type of routing information to be distributed by the BGP instance.
- name
-
Specifies the group name up to 32 characters.
- ip-address
-
Specifies the IPv4 or IPv6 address
- dns
-
Displays the reverse DNS resolution of BGP neighbor.
Platforms
All
Output
The following output is an example of BGP summary information, and Output fields: BGP summary describes the output fields.
Output ExampleA:Dut-B>config>router>bgp# show router bgp summary
===============================================================================
BGP Router ID:1.0.0.2 AS:1 Local AS:1
===============================================================================
BGP Admin State : Up BGP Oper State : Up
Total Peer Groups : 1 Total Peers : 1
Total VPN Peer Groups : 0 Total VPN Peers : 0
Current Internal Groups : 1 Max Internal Groups : 1
Total BGP Paths : 19 Total Path Memory : 6840
*A:ALA-12# show router 3 bgp summary
===============================================================================
BGP Router ID : 10.0.0.14 AS : 65206 Local AS : 65206
===============================================================================
BGP Admin State : Up BGP Oper State : Up
Confederation AS : 40000
Member Confederations : 65205 65206 65207 65208
Number of Peer Groups : 2 Number of Peers : 7
Total BGP Active Routes : 86689 Total BGP Routes : 116999
Total BGP Paths : 35860 Total Path Memory : 2749476
Total Supressed Routes : 0 Total History Routes : 0
Total Decayed Routes : 0
===============================================================================
BGP Summary
===============================================================================
Neighbor AS PktRcvd PktSent InQ OutQ Up/Down State|Recv/Actv/Sent
-------------------------------------------------------------------------------
10.0.0.1 65206 5 21849 0 0 00h01m29s 32/0/86683
10.0.0.12 65206 0 0 0 0 00h01m29s Active
10.0.0.13 65206 5 10545 0 50 00h01m29s 6/0/86683
10.0.0.15 65205 0 0 0 0 00h01m29s Active
10.0.0.16 65206 5 9636 0 50 00h01m29s 6/0/86683
10.0.27.1 2 0 0 0 0 00h01m29s Active
10.0.28.1 60203 22512 15 0 0 00h01m29s 116955/86689/9
===============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 bgp summary dns
===============================================================================
BGP Router ID : 10.0.0.14 AS : 65206 Local AS : 65206
===============================================================================
BGP Admin State : Up BGP Oper State : Up
Confederation AS : 40000
Member Confederations : 65205 65206 65207 65208
Number of Peer Groups : 2 Number of Peers : 7
Total BGP Active Routes : 86689 Total BGP Routes : 116999
Total BGP Paths : 35860 Total Path Memory : 2749476
Total Supressed Routes : 0 Total History Routes : 0
Total Decayed Routes : 0
===============================================================================
BGP Summary
===============================================================================
Neighbor
Name
Description
AS PktRcvd PktSent InQ OutQ Up/Down State|Recv/Actv/Sent
-------------------------------------------------------------------------------
10.0.0.1
dut1.nokia.com
65206 5 21849 0 0 00h01m29s 32/0/86683
10.0.0.12
dut2.nokia.com
65206 0 0 0 0 00h01m29s Active
10.0.0.13
dut3.nokia.com
65206 5 10545 0 50 00h01m29s 6/0/86683
10.0.0.15
dut4.nokia.com
65205 0 0 0 0 00h01m29s Active
10.0.0.16
10.0.0.16
65206 5 9636 0 50 00h01m29s 6/0/86683
10.0.27.1
dut6.nokia.com
2 0 0 0 0 00h01m29s Active
10.0.28.1
10.0.28.1
60203 22512 15 0 0 00h01m29s 116955/86689/9
===============================================================================
|
Label |
Description |
|---|---|
|
BGP Router ID |
The local BGP router ID |
|
AS |
The configured autonomous system number |
|
Local AS |
The configured local AS setting, if not configured it is the same as the system AS |
|
BGP Admin State |
Down — BGP is administratively disabled Up — BGP is administratively enabled |
|
BGP Oper State |
Down — BGP is operationally disabled Up — BGP is operationally enabled |
|
Confederation AS |
The configured confederation AS |
|
Current Internal Groups |
The current number of internal BGP peer groups. BGP peers are grouped within the BGP software to optimize the building of UPDATE messages towards peers with a similar configuration. An internal group is not the same as a configured BGP peer group. |
|
Max Internal Groups |
The maximum number of internal BGP peer groups that existed at any point since the last restart of BGP. BGP peers are grouped within the BGP software to optimize the building of UPDATE messages towards peers with a similar configuration. An internal group is not the same as a configured BGP peer group. |
|
Member Confederations |
The configured members of the BGP confederation |
|
Number of Peer Groups |
The total number of configured BGP peer groups |
|
Number of Peers |
The total number of configured BGP peers |
|
Total BGP Active Routes |
The total number of BGP routes used in the forwarding table |
|
Total BGP Routes |
The total number of BGP routes learned from BGP peers |
|
Total BGP Paths |
The total number of unique sets of BGP path attributes learned from BGP peers |
|
Total Path Memory |
Total amount of memory used to store the path attributes |
|
Total Suppressed Routes |
Total number of suppressed routes due to route damping |
|
Total History Routes |
Total number of routes with history due to route damping |
|
Total Decayed Routes |
Total number of decayed routes due to route damping |
|
Neighbor |
BGP neighbor address |
|
Name |
DNS name of the BGP neighbor |
|
AS (Neighbor) |
BGP neighbor autonomous system number |
|
PktRcvd |
Total number of packets received from the BGP neighbor |
|
PktSent |
Total number of packets sent to the BGP neighbor |
|
InQ |
The number of BGP messages to be processed |
|
OutQ |
The number of BGP messages to be transmitted |
|
Up/Down |
The amount of time that the BGP neighbor has either been established or not established depending on its current state |
|
State|Recv/Actv/Sent |
The BGP neighbor’s current state (if not established) or the number of received routes, active routes and sent routes (if established) |
summary
Syntax
summary [session ip-addr[label-space]] [ ipv4 | ipv6]
Context
[Tree] (show>router>ldp>bindings summary)
Full Context
show router ldp bindings summary
Description
This command displays a summary of LDP bindings.
Parameters
- session ip-addr[label-space]
-
Specifies the IP address and label space identifier.
- ipv4
-
Displays IPv4 summary bindings information.
- ipv6
-
Displays IPv6 summary bindings information.
Platforms
All
summary
Syntax
summary
Context
[Tree] (show>router>mpls-labels summary)
Full Context
show router mpls-labels summary
Description
This command displays the MPLS label summary.
Platforms
All
Output
The following output is an example of MPLS label summary information.
Output fields: MPLS label summary describes MPLS label summary output fields.
Output Example*A:cses-V23>show>router>mpls-labels># show router mpls-labels summary
===============================================================================
Mpls-Labels Summary
===============================================================================
Static Label Range : 18400
Bgp Labels Hold Timer : 30
Segment Routing Start Label : 0
Segment Routing End Label : 0
Reserved Label Block Name :
test reserved-label
===============================================================================
|
Label |
Description |
|---|---|
|
Static Label Range |
Displays the static label range. |
|
Bgp Labels Hold Timer |
Displays the BGP labels hold timer. |
|
Segment Routing Start Label |
Displays the segment routing start label. |
|
Segment Routing End Label |
Displays the segment routing end label. |
|
Reserved Label Block Name |
Displays the reserved label block name. |
summary
Syntax
summary
Context
[Tree] (show>app-assure>group>http-enrich summary)
Full Context
show application-assurance group http-enrich summary
Description
This command displays summarized HTTP enrichment information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
summary
Syntax
summary
Context
[Tree] (show>app-assure>group>policy summary)
Full Context
show application-assurance group policy summary
Description
This command displays application-assurance policy summary information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
summary
Syntax
summary
Context
[Tree] (show>app-assure>group>aa-sub summary)
Full Context
show application-assurance group aa-sub summary
Description
This command displays a summary of statistics for a specific aa-sub.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of the summary information.
Output ExampleA:ALU>show>app-assure>group>aa-sub# summary
===============================================================================
Application-Assurance Subscriber Summary
===============================================================================
AA-Subscriber : TestSubscriberName
ISA assigned : 3/2
App-Profile : Power_Profile
App-Profile divert : Yes
Sub-quarantined : No
Capacity cost : 1
-------------------------------------------------------------------------------
Traffic Octets Packets Flows
-------------------------------------------------------------------------------
Admitted from subscriber: 7092548 52935 2843
Denied from subscriber: 51160 617 374
Active flows from subscriber: 12
Admitted to subscriber: 73705675 73538 1453
Denied to subscriber: 0 0 0
Active flows to subscriber: 12
Total flow duration: 12750 seconds
Terminated flows: 4646
Short Duration flows: 4516
Medium Duration flows: 130
Long Duration flows: 0
-------------------------------------------------------------------------------
Top App-Groups Octets Packets Flows
-------------------------------------------------------------------------------
MultiMedia 29060053 29961 138
Tunneling 19659289 33535 164
Web 14856331 19829 932
===============================================================================
A:ALU>show>app-assure>group>aa-sub#
summary
Syntax
summary
Context
[Tree] (tools>dump>app-assure>group summary)
Full Context
tools dump application-assurance group summary
Description
This command displays subscriber summary information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
summary
Syntax
summary
Context
[Tree] (show>router>firewall summary)
Full Context
show router firewall summary
Description
This command displays a simple overview of all firewall configurations specific to the routing instance.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of summary firewall information.
Output ExampleNode# show router 4 firewall summary
===============================================================================
Firewall policies
===============================================================================
Policy : firewall_dhcp6_4
-------------------------------------------------------------------------------
Domain : domain_dhcp6_4
ISA group : 1
Administrative state : in-service
Policy : firewall_slaac_4
-------------------------------------------------------------------------------
Domain : domain_slaac_4
ISA group : 1
Administrative state : in-service
-------------------------------------------------------------------------------
No. of policies: 2
===============================================================================
summary
Syntax
summary
Context
[Tree] (show>router>nat summary)
Full Context
show router nat summary
Description
This command displays the NAT information summary.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of this command.
Output Example*A:SR12_PPPOE>show>router>nat# show router Base nat summary
===============================================================================
NAT pools
===============================================================================
Pool NAT-group Type Admin-state
-------------------------------------------------------------------------------
privpool 3 largeScale inService
pubpool 1 largeScale inService
-------------------------------------------------------------------------------
No. of pools: 2
===============================================================================
A:SR12_PPPOE#
The following is an output example showing NAT import policy information.
*A:Dut-C>config>service>vprn>nat>inside# /show router 101 nat summary
===============================================================================
ISA NAT group redundancy : active-standby
===============================================================================
===============================================================================
Subscriber identification
===============================================================================
Admin state : outOfService
Attribute vendor : nokia
Attribute type : alc-sub-string
Description : (Not Specified)
Drop unidentified traffic : false
Radius proxy server router : (Not Specified)
Radius proxy server name : (Not Specified)
Last management change : 05/11/2021 11:09:25
===============================================================================
===============================================================================
NAT Redundancy
===============================================================================
Peer : (Not Specified)
IPv6 peer : (Not Specified)
Steering route : (Not Specified)
===============================================================================
===============================================================================
NAT policies
===============================================================================
Policy : n44Pool1-1
-------------------------------------------------------------------------------
Inside router : vprn101
Outside router : vprn601
Pool : n44Pool1
Type : default
Active : true
-------------------------------------------------------------------------------
No. of policies: 1
===============================================================================
===============================================================================
NAT-Import policies
===============================================================================
Policy 1 : policystatment1
Policy 2 : bgpNat3
Policy 3 : (Not Specified)
Policy 4 : (Not Specified)
Policy 5 : (Not Specified)
===============================================================================
===============================================================================
Destination NAT
===============================================================================
Inside source prefix list : (Not Specified)
Outside route limit : 32768
Outside routes : 0
===============================================================================
===============================================================================
Large Scale NAT destination prefixes
===============================================================================
Destination prefix Nat policy
-------------------------------------------------------------------------------
200.0.0.0/16 n44Pool1-1
===============================================================================
*A:Dut-C>config>service>vprn>nat>inside#
summary
Syntax
summary
Context
[Tree] (show>grp-encryp summary)
Full Context
show group-encryption summary
Description
This command shows NGE summary information.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of NGE summary information, and Output fields: group encryption summary describes the fields.
Output Exampledomain1>show>grp-encryp# summary
============================
Group Encryption
============================
Encryption Label : 34
============================
=======================================================
Encryption Keygroup
=======================================================
Id Name Auth Algo Encr Algo Active OutSA
-------------------------------------------------------
2 KG1_secure sha256 aes128 6
4 sha256 aes128 0
-------------------------------------------------------
No. of Encryption Keygroup: 2
=======================================================
domain1>show>grp-encryp#
|
Label |
Description |
|---|---|
|
Group Encryption |
|
|
Encryption Label |
The unique network-wide group encryption label |
|
Encryption Keygroup |
|
|
Id |
The key group identifier value |
|
Name |
The key group name |
|
Auth Algo |
The authentication algorithm used by the key group |
|
Encr Algo |
The encryption algorithm used by the key group |
|
Active OutSA |
The active outbound SA for the key group |
|
No. of Encryption Keygroup |
The number of encryption key groups currently configured on the node |
summary
Syntax
summary
Context
[Tree] (show>router>seg-rt>sr-policies summary)
Full Context
show router segment-routing sr-policies summary
Description
This command displays summary information about all policies: BGP, static local, and static non-local.
Platforms
All
Output
The following output is an example of policies summary information.
Output Example*A:Dut-A>config>router# show router segment-routing sr-policies summary
===============================================================================
SR-Policies Summary
===============================================================================
Admin Status : Up
Ingress Stats : N/A Egress Stats : N/A
Resv Label Blk Name:
TTM Preference : 14 BSID Allocated : 0
Static Local Policies : 2 Active Static Lcl Pol : 2
Static Non Local Pol : 0
BGP Policies : 0 Active BGP Policies : 0
===============================================================================
summary
Syntax
summary
Context
[Tree] (show>subscr-mgmt>pfcp summary)
Full Context
show subscriber-mgmt pfcp summary
Description
This command displays PFCP session and association counters.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of PFCP summary information.
Output ExampleA:BNG-UPF# show subscriber-mgmt pfcp summary
===============================================================================
PFCP system summary
===============================================================================
Actual number of associations : 1
Actual number of PFCP sessions : 2
Actual number of PFCP sessions in setup : 0
Actual number of default tunnels : 1
Actual number of PPP sessions : 1
Actual number of IPOE sessions : 0
===============================================================================
summary
Syntax
summary
Context
[Tree] (show>router>srv6 summary)
Full Context
show router segment-routing-v6 summary
Description
This command displays the summary SRv6 status.
Platforms
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR
summary
Syntax
summary
Context
[Tree] (show>li>x-interfaces summary)
Full Context
show li x-interfaces summary
Description
This command displays a summary of the status of the X1, X2, and X3 interfaces.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
summary
Syntax
summary
Context
[Tree] (tools>dump>system>cpm-http-redirect summary)
Full Context
tools dump system cpm-http-redirect summary
Description
This command displays the summary of the cpm-http-redirect optimized-mode information for the total number of hosts and connections currently in use. This output can also be used to compare the current system utilization with the maximum system scale.
Platforms
All
Output
The following output is an example of the summary information.
Output ExampleA# tools dump system cpm-http-redirect summary
===============================================================================
CPM HTTP Redirect summary
===============================================================================
Actual number of hosts : 0
Actual number of connections : 0
Number of hosts created in the last second : 0
Number of connections created in the last second : 0
===============================================================================
summary
Syntax
summary [family] [egress-if port-id]
summary [family] [egress-lsp tunnel-id]
summary [egress-nh ip-address] [family]
Context
[Tree] (show>router>ldp>bindings>active summary)
Full Context
show router ldp bindings active summary
Description
This command displays a summary of the LDP active bindings.
Parameters
- ip-address
-
Specifies the IPv4 or IPv6 address.
- family
-
Specifies the address family.
- port-id
-
Specifies the port ID.
- tunnel-id
-
Specifies the tunnel ID.
Platforms
All
summary-address
summary-address
Syntax
summary-address [ip-address [/prefix-length]] [detail]
Context
[Tree] (show>router>isis summary-address)
Full Context
show router isis summary-address
Description
This command displays IS-IS summary addresses information.
Parameters
- ip-prefix[/prefix-length]
-
Displays the summary address information for a certain IPv4 or IPv6 address.
- detail
-
Keyword to display detailed information.
Platforms
All
Output
The following output is an example of summary address information and Output fields: IS-IS summary address describes the IS-IS summary address output fields.
Output exampleA:node-2# show router isis summary-address
===============================================================================
Rtr Base ISIS Instance 0 Summary Address
===============================================================================
Address Level Tag Algo UPA
-------------------------------------------------------------------------------
1.1.1.2/32 L1L2 None 0 Yes
1.1.2.0/24 L1 None N.A. No
1.2.3.4/32 L1L2 4294967295 128 No
-------------------------------------------------------------------------------
Summary Addresses : 3
===============================================================================The following output is an example of detailed summary address information and Output fields: IS-IS summary address describes the IS-IS summary address output fields.
Output exampleA:node-2# show router isis summary-address detail
===============================================================================
Rtr Base ISIS Instance 0 Summary Address (detail)
===============================================================================
-------------------------------------------------------------------------------
Summary Address : 1.1.1.2/32
-------------------------------------------------------------------------------
Level : L1L2
Tag : None
Algorithm : 0
Advertise Unreachable : Enabled
Match Route Tag : 1234
Advertise Route Tag : None
-------------------------------------------------------------------------------
Summary Address : 1.1.2.0/24
-------------------------------------------------------------------------------
Level : L1
Tag : None
Algorithm : N.A.
Advertise Unreachable : Disabled
Match Route Tag : N.A.
Advertise Route Tag : N.A.
-------------------------------------------------------------------------------
Summary Address : 1.2.3.4/32
-------------------------------------------------------------------------------
Level : L1L2
Tag : 4294967295
Algorithm : 128
Advertise Unreachable : Disabled
Match Route Tag : N.A.
Advertise Route Tag : N.A.
===============================================================================
|
Label |
Description |
|---|---|
|
Address or Summary Address |
Displays the IP address |
|
Level |
Displays the IS-IS level from which the prefix is summarized |
|
Tag |
Displays the tag number or displays as None if no tag number exists |
|
Algo or Algorithm |
Displays the flexible algorithm number if it exists |
|
UPA |
Displays if the summary is configured for the originating UPA when suddenly a summary member route disappears |
|
Advertise Unreachable |
Displays if advertise unreachable is enabled |
|
Match Route Tag |
When configured, displays the match route tag if it is applicable. When advertise unreachable is enabled, but no route tag is configured, this field displays as None. When advertise unreachable is disabled, this field displays as N.A. |
|
Advertise Route Tag |
When configured, displays the advertise route tag. When advertise unreachable is enabled, but no route tag is configured this field displays as None. When advertise unreachable is disabled, this field displays as N.A. |
support-mode
support-mode
Syntax
support-mode
Context
[Tree] (tools>dump>system>security support-mode)
Full Context
tools dump system security support-mode
Description
Commands in this context display system support-mode information used by Nokia technical support for troubleshooting.
Platforms
7750 SR-1, 7750 SR-s, 7950 XRS-20e
support-mode
Syntax
support-mode
Context
[Tree] (tools>perform>system>security support-mode)
Full Context
tools perform system security support-mode
Description
Commands in this context perform security support-mode operations.
Platforms
All
svlan-statistics
svlan-statistics
Syntax
svlan-statistics port port-id all-svlans
svlan-statistics port port-id svlan tag
Context
[Tree] (show>subscr-mgmt svlan-statistics)
Full Context
show subscriber-mgmt svlan-statistics
Description
This command displays S-VLAN statistics.
Parameters
- port-id
-
Specifies the physical port ID in the slot/mda/port format of the S-VLAN.
- all-svlans
-
Displays statistics for all S-VLANs on the port.
- svlan
-
Displays information about the S-VLAN.
- tag
-
Specifies a valid S-VLAN identifier.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of S-VLAN statistics information.
The collected statistics per outer VLAN tag, including the number of subscriber hosts is captured in the output.
Output Example*A:Dut-C# show subscriber-mgmt svlan-statistics port 1/1/2 all-svlans
===============================================================================
Subscriber VLAN statistics for port 1/1/2 vlan 51
===============================================================================
Ingress Egress
-------------------------------------------------------------------------------
IP packets 5 5
Bytes in IP packets 670 670
Last cleared 12/18/2020 10:03:48
-------------------------------------------------------------------------------
Number of active subscriber hosts : 1
===============================================================================
===============================================================================
Subscriber VLAN statistics for port 1/1/2 vlan 113
===============================================================================
Ingress Egress
-------------------------------------------------------------------------------
IP packets 10 10
Bytes in IP packets 1320 1320
Last cleared 12/18/2020 10:03:48
-------------------------------------------------------------------------------
Number of active subscriber hosts : 2
===============================================================================
*A:Dut-C#
This counter counts subscriber hosts (represented as individual IP addresses) and not sessions. This is shown in the output of the following commands where there is only one session but two subscriber hosts counted in the VLAN statistics.
*A:Dut-C# show service active-subscribers
===============================================================================
Active Subscribers
===============================================================================
-------------------------------------------------------------------------------
Subscriber test-1
(sub_profile)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(1) SLA Profile Instance sap:1/1/5:4 - sla:sla_profile
-------------------------------------------------------------------------------
IP Address
MAC Address Session Origin Svc Fwd
-------------------------------------------------------------------------------
10.2.3.41
00:00:00:00:00:04 IPoE DHCP 10 Y
90:64:1:2::/64
00:00:00:00:00:04 IPoE SLAAC 10 Y
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of active subscribers : 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show subscriber-mgmt svlan-statistics port 1/1/5 all-svlans
===============================================================================
Subscriber VLAN statistics for port 1/1/5 vlan 4
===============================================================================
Ingress Egress
-------------------------------------------------------------------------------
IP packets 0 0
Bytes in IP packets 0 0
-------------------------------------------------------------------------------
Number of active subscriber hosts : 2
===============================================================================
*A:Dut-C#
svlan-statistics
Syntax
svlan-statistics port port-id all-svlans
svlan-statistics port port-id svlan tag
Context
[Tree] (clear>subscr-mgmt svlan-statistics)
Full Context
clear subscriber-mgmt svlan-statistics
Description
This command clears Subscriber-VLAN statistics.
Parameters
- port-id
-
Specifies the physical port ID in the slot/mda/port format of the S-VLAN.
- all-svlans
-
Clears statistics for all S-VLANs on the port.
- svlan
-
Clears information associated with the S-VLAN.
- tag
-
Specifies a valid S-VLAN identifier.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
switch-fabric
switch-fabric
Syntax
switch-fabric [exclude-sfm sfm-list]
switch-fabric high-bandwidth-multicast
switch-fabric failure-recovery
Context
[Tree] (show>system switch-fabric)
Full Context
show system switch-fabric
Description
This command displays switch fabric information. When an MDA is not provisioned in an XCM, no information is displayed relating to that MDA. To display the forwarding capacity and multicast planes corresponding to that MDA, regardless of whether an XMA is equipped, an mda-type must be provisioned for that MDA.
Parameters
- sfm-list
-
Specifies the SFMs, listed as a comma-separated list of SFM numbers (1 to 16, depending on the platform), to exclude from the displayed switch fabric information.
- high-bandwidth-multicast
-
Keyword to display the high-bandwidth multicast traffic tap allocations of the switch fabric.
- failure-recovery
-
Keyword to display information about the automatic switch fabric recovery process. The SFMs are listed in numerical order and are shown only when the recovery process is in progress or has completed.
Platforms
7450 ESS, 7750 SR-7/12/12e, 7750 SR-e, 7750 SR-1s, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, 7750 SR-14s, 7950 XRS
Output
The following outputs are examples of switch fabric information, and the tables describe the output fields.
-
Output Example show system switch-fabric; Output fields: switch fabric
-
Output Example show system switch-fabric exclude-sfm; Output fields: switch fabric
-
Output Example show system switch-fabric high-bandwidth-multicast; Output fields: switch fabric high bandwidth multicast
-
Output Example show system switch-fabric failure-recovery (7750 SR); Output fields: switch fabric failure recovery
*A:DUT-A# show system switch-fabric
===============================================================================
Switch Fabric
===============================================================================
Slot/FP Min. Forwarding Capacity Max. Forwarding Capacity
-------------------------------------------------------------------------------
1/1 100% 100%
1/2 100% 100%
1/5 100% 100%
1/6 100% 100%
3/1 100% 100%
3/5 100% 100%
3/6 100% 100%
5/1 100% 100%
5/2 100% 100%
5/3 100% 100%
5/5 100% 100%
5/6 100% 100%
5/7 100% 100%
5/8 100% 100%
A 100% 100%
B 100% 100%
-------------------------------------------------------------------------------
sfm-loss-threshold: 2
===============================================================================
Output fields: switch fabric describes the switch fabric output fields.
|
Label |
Description |
|---|---|
|
Slot/FP |
Displays either the FP (uniquely identified by an IOM number and FP number) or a CPM letter. |
|
Min. Forwarding Capacity |
Displays the minimum forwarding capacity of the slot and XMA/MDA as a percentage. |
|
Max. Forwarding Capacity |
Displays the maximum forwarding capacity of the slot and XMA/MDA as a percentage. |
|
Sfm-loss-threshold |
Displays the number of SFMs that are permitted to fail prior to SFM overload. Supported on SR-7s and SR-14s platforms only. |
*B:DUT-A# show system switch-fabric exclude-sfm 1,2,3
===============================================================================
Switch Fabric
===============================================================================
Slot/FP Min. Forwarding Capacity Max. Forwarding Capacity
-------------------------------------------------------------------------------
1/1 69% 71%
1/2 69% 71%
1/5 100% 100%
1/6 100% 100%
3/1 100% 100%
3/5 69% 69%
3/6 69% 69%
5/1 69% 71%
5/2 69% 71%
5/3 69% 71%
5/5 69% 71%
5/6 69% 71%
5/7 69% 71%
5/8 69% 71%
A 100% 100%
B 100% 100%
-------------------------------------------------------------------------------
sfm-loss-threshold: 2
===============================================================================
*A:PE-1# show system switch-fabric high-bandwidth-multicast
===============================================================================
Switch Fabric
===============================================================================
Cap: Planes:
Slot/FP Min Max Hbm Grp Hi | Lo
-------------------------------------------------------------------------------
2/1 100% 100% No 0 1 0 2 3 4 5 6 7 8 9 10 11 12 13 14 | 15
5/1 100% 100% No 0 17 16 18 19 20 21 22 23 24 25 26 27 28 29 30 | 31
A 100% 100% No 0 40 | 40
B 100% 100% No 0 24 | 24
===============================================================================
*A:PE-1#
Output fields: switch fabric high bandwidth multicast describes the switch fabric high-bandwidth multicast output fields.
|
Label |
Description |
|---|---|
|
Slot/FP |
Displays either the FP (uniquely identified by an IOM number and FP number) or a CPM letter. |
|
Cap Min |
Displays the minimum forwarding capacity of the slot and XMA/MDA as a percentage. |
|
Cap Max |
Displays the maximum forwarding capacity of the slot and XMA/MDA as a percentage. |
|
Hbm |
Displays high-bandwidth multicast traffic information, which can be used to avoid overlapping planes on FPs that have a lot of multicast ingress traffic. |
|
Grp |
Displays high-bandwidth multicast groups for each FP. |
|
Planes Hi | Lo |
Displays plane information. When 2 FPs are in a different group, no plane overlap occurs. |
A:Dut-B# show system switch-fabric failure-recovery
===============================================================================
Automatic Switch Fabric Failure Recovery
===============================================================================
Admin state : enabled
Oper state : recoveryInProgress
-------------------------------------------------------------------------------
SFM Slot State Time
-------------------------------------------------------------------------------
1 pending 02/11/2021 21:05:45
2 inProgress 02/11/2021 21:05:45
===============================================================================
A:Dut-B#
Output fields: switch fabric failure recovery describes the automatic switch fabric recovery process output fields.
|
Label |
Description |
|---|---|
|
Admin State |
Displays the administrative state, enabled or disabled. |
|
Oper State |
Displays the current operational state:
|
|
SFM Slot |
Displays the fabric slot within a chassis in the system. |
|
State |
Displays the stage of the automatic switch fabric recovery process. |
|
Time |
Displays the date and time of the stage. |
switch-fabric
Syntax
switch-fabric
Context
[Tree] (tools>perform>system switch-fabric)
Full Context
tools perform system switch-fabric
Description
This command performs switch fabric operations.
Platforms
7450 ESS, 7750 SR-7, 7750 SR-12e, 7950 XRS
switch-path
switch-path
Syntax
switch-path [lsp lsp-name] [path path-name]
Context
[Tree] (tools>perform>router>mpls switch-path)
Full Context
tools perform router mpls switch-path
Description
Use this command to move from a standby (or an active secondary) to another standby of the same priority. If a new standby path with a higher priority or a primary path comes up after the tools perform command is executed, the path re-evaluation command runs and the path is moved to the path specified by the outcome of the re-evaluation.
Parameters
- lsp-name
-
Specifies an existing LSP name, up to 64 characters in length.
- path-name
-
Specifies the path name to which to move the specified LSP.
Platforms
All
sync
sync
Syntax
sync [peer ip-address]
sync peer ip-address detail
sync [peer ip-address] statistics
Context
[Tree] (show>redundancy>multi-chassis sync)
Full Context
show redundancy multi-chassis sync
Description
This command displays synchronization information.
Parameters
- ip-address
-
Shows peer information about the specified IP address.
- detail
-
Displays detailed peer information.
- statistics
-
Displays peer statistics.
Platforms
All
Output
See the following sections for output example:
The following output is an example of multi-chassis sync information, and Output fields: redundancy multi-chassis sync describes the output fields.
Multi-Chassis Sync Output Example*A:subscr_mgt_2# show redundancy multi-chassis sync
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.20
Description : Mc-Lag peer 10.10.10.20
Authentication : Disabled
Source IP Address : 0.0.0.0
Admin State : Enabled
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications : SUBMGMT
Sync Admin State : Up
Sync Oper State : Up
DB Sync State : inSync
Num Entries : 1
Lcl Deleted Entries : 0
Alarm Entries : 0
Rem Num Entries : 1
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
A:subscr_mgt_2#
|
Label |
Description |
|---|---|
|
Peer IP Address |
Displays the multi-chassis redundancy peer. |
|
Description |
The text string describing the peer. |
|
Authentication |
If configured, displays the authentication key used between this node and the multi-chassis peer. |
|
Source IP Address |
Displays the source address used to communicate with the multi-chassis peer. |
|
Admin State |
Displays the administrative state of the peer. |
|
Client Applications |
Displays the list of client applications synchronized between SRs. |
|
Sync Admin State |
Displays the administrative state of the synchronization. |
|
Sync Oper State |
Displays the operation state of the synchronization. |
|
DB Sync State |
Displays the database state of the synchronization. |
|
Num Entries |
Displays the number of entries on local router. |
|
Lcl Deleted Entries |
Displays the number of deleted entries made at the local router. |
|
Alarm Entries |
Displays the alarm entries on the local router. |
|
Rem Num Entries |
Displays the number of entries on the remote router. |
|
Rem Lcl Deleted Entries |
Displays the number of locally deleting entries made by the remote router. |
|
Rem Alarm Entries |
Displays alarm entries on the remote router. |
The following output is an example of multi-chassis sync peer information, and Output fields: redundancy multi-chassis sync peer describes the output fields.
Redundancy Multi-Chassis Sync Peer Output Example*A:subscr_mgt_2# show redundancy multi-chassis sync peer 10.10.10.20
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.20
Description : Mc-Lag peer 10.10.10.20
Authentication : Disabled
Source IP Address : 0.0.0.0
Admin State : Enabled
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications : SUBMGMT
Sync Admin State : Up
Sync Oper State : Up
DB Sync State : inSync
Num Entries : 1
Lcl Deleted Entries : 0
Alarm Entries : 0
Rem Num Entries : 1
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
MCS Application Stats
===============================================================================
Application : igmp
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : igmpSnooping
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : subMgmt
Num Entries : 1
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 1
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : srrp
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
*A:subscr_mgt_2#
|
Label |
Description |
|---|---|
|
Peer IP Address |
Displays the multi-chassis redundancy peer. |
|
Description |
The text string describing the peer. |
|
Authentication |
If configured, displays the authentication key used between this node and the multi-chassis peer. |
|
Source IP Address |
Displays the source address used to communicate with the multi-chassis peer. |
|
Admin State |
Displays the administrative state of the peer. |
|
Client Applications |
Displays the list of client applications synchronized between SRs. |
|
Sync Admin State |
Displays the administrative state of the synchronization. |
|
Sync Oper State |
Displays the operation state of the synchronization. |
|
DB Sync State |
Displays the database state of the synchronization. |
|
Num Entries |
Displays the number of entries on local router. |
|
Lcl Deleted Entries |
Displays the number of deleted entries made at the local router. |
|
Alarm Entries |
Displays the alarm entries on the local router. |
|
Rem Num Entries |
Displays the number of entries on the remote router. |
|
Rem Lcl Deleted Entries |
Displays the number of locally deleting entries made by the remote router. |
|
Rem Alarm Entries |
Displays alarm entries on the remote router. |
The following output is an example of multi-chassis sync detail information, and Output fields: redundancy multi-chassis sync peer detail describes the output fields.
Output Example: Redundancy Multi-Chassis Sync Peer Detail*A:subscr_mgt_2# show redundancy multi-chassis sync peer 10.10.10.20 detail
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.20
Description : Mc-Lag peer 10.10.10.20
Authentication : Disabled
Source IP Address : 0.0.0.0
Admin State : Enabled
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications : SUBMGMT
Sync Admin State : Up
Sync Oper State : Up
DB Sync State : inSync
Num Entries : 1
Lcl Deleted Entries : 0
Alarm Entries : 0
Rem Num Entries : 1
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
MCS Application Stats
===============================================================================
Application : igmp
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : igmpSnooping
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : subMgmt
Num Entries : 1
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 1
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : srrp
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
Ports synced on peer 10.10.10.20
===============================================================================
Port/Encap Tag
-------------------------------------------------------------------------------
lag-1 test123
===============================================================================
*A:subscr_mgt_2#
|
Label |
Description |
|---|---|
|
Peer IP Address |
Displays the multi-chassis redundancy peer. |
|
Description |
The text string describing the peer. |
|
Authentication |
If configured, displays the authentication key used between this node and the multi-chassis peer. |
|
Source IP Address |
Displays the source address used to communicate with the multi-chassis peer. |
|
Admin State |
Displays the administrative state of the peer. |
|
Client Applications |
Displays the list of client applications synchronized between routers. |
|
Sync Admin State |
Displays the administrative state of the synchronization. |
|
Sync Oper State |
Displays the operation state of the synchronization. |
|
DB Sync State |
Displays the database state of the synchronization. |
|
Num Entries |
Displays the number of entries on local router. |
|
Lcl Deleted Entries |
Displays the number of deleted entries made at the local router. |
|
Alarm Entries |
Displays the alarm entries on the local router. |
|
Rem Num Entries |
Displays the number of entries on the remote router. |
|
Rem Lcl Deleted Entries |
Displays the number of locally deleting entries made by the remote router. |
|
Rem Alarm Entries |
Displays alarm entries on the remote router. |
sync-database
sync-database
Syntax
sync-database [peer ip-address] [port port-id | lag-id] [sync-tag sync-tag] [application application] [detail] [type type]
sync-database [peer ip-address] [sdp sdp-id] [sync-tag sync-tag] [application application] [detail] [type type]
Context
[Tree] (tools>dump>redundancy>multi-chassis sync-database)
Full Context
tools dump redundancy multi-chassis sync-database
Description
This command dumps multi-chassis sync database information.
Parameters
- ip-address
-
Dumps the specified address of the multi-chassis peer.
- port-id
-
Dumps the specified port ID of the multi-chassis peer.
- lag-id
-
Dumps the specified Link Aggregation Group (LAG) on this system.
- sync-tag
-
Dumps the synchronization tag used while synchronizing this port with the multi-chassis peer, up to 32 characters in length.
- application
-
Dumps the specified application information that was synchronized with the multi-chassis peer.
- detail
-
Displays detailed information.
- type
-
Displays information for the specified type.
- sdp-id
-
Displays information for the specified SDP ID.
Platforms
All
Output
The following output is an example of sync database information.
Output ExampleA:Dut-C# tools dump redundancy multi-chassis sync-database application
<ip-address> : a.b.c.d
<port-id|lag-id> : slot/mda/port or lag-<lag-id>
<sync-tag> : [32 chars max]
<application> : dhcp-server - local dhcp server
igmp - internet group management protocol
igmp-snooping - igmp-snooping
mc-ring - multi-chassis ring
mld - multicast listener discovery
mld-snooping - multicast listener discovery-snooping
srrp - simple router redundancy protocol
sub-host-trk - subscriber host tracking
sub-mgmt-ipoe - subscriber management for IPoE
sub-mgmt-pppoe - subscriber management for PPPoE
mc-ipsec - multi-chassis IPsec
<detail> : - displays detailed information
<type> : alarm-deleted|local-deleted|global-deleted|
omcr-standby|omcr-alarmed
sync-database
Syntax
sync-database peer ip-address all application application
sync-database peer ip-address port { port-id | lag-id} [sync-tag sync-tag] application application
sync-database peer ip-address sdp sdp-id [sync-tag sync-tag] application application
sync-database peer ip-address sync-tag sync-tag application application
Context
[Tree] (clear>redundancy>multi-chassis sync-database)
Full Context
clear redundancy multi-chassis sync-database
Description
This command clears multi-chassis sync database information.
Parameters
- ip-address
-
Clears the specified address of the multi-chassis peer.
- port-id
-
Clears the specified port ID of the multi-chassis peer.
- lag-id
-
Clears the specified Link Aggregation Group (LAG) on this system.
- all
-
Clears all ports and synchronization tags.
- sync-tag
-
Clears the synchronization tag used while synchronizing this port with the multi-chassis peer. The synchronization tag can be up to 32 characters.
- sdp-id
-
Specifies the SDP identifier.
- application
-
Clears the specified application information that was synchronized with the multi-chassis peer.
Platforms
All
sync-database-reconcile
sync-database-reconcile
Syntax
sync-database-reconcile [peer ip-address] [ port port-id | lag-id [sync-tag sync-tag]] [application application]
sync-database-reconcile [peer ip-address] [ sdp sdp-id [sync-tag sync-tag]] [ application application]
Context
[Tree] (tools>perform>redundancy>multi-chassis sync-database-reconcile)
Full Context
tools perform redundancy multi-chassis sync-database-reconcile
Description
This command provides the parameters to reconcile MCS database entries.
Parameters
- ip-address
-
Specifies the IP address (in the form of a.b.c.d).
- port-id
-
Specifies the port ID in the slot/MDA/port format.
- lag-id
-
Specifies the LAG ID.
- syn-tag
-
Specifies the syn tag up to 32 characters.
- application
-
Specifies the application.
- sdp-id
-
Specifies the SDP ID.
Platforms
All
sync-if-timing
sync-if-timing
Syntax
sync-if-timing
Context
[Tree] (show>system>satellite>eth-sat sync-if-timing)
Full Context
show system satellite eth-sat sync-if-timing
Description
This command displays synchronous interface timing operational information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of Ethernet satellite synchronous interface timing information where it is the default case of using the first two uplink ports as sources into the satellite. Output fields: system satellite timing describes the fields.
show system satellite eth-sat 1 sync-if-timing
===============================================================================
Satellite esat-1 Synchronous Interface Timing Operational Information
===============================================================================
System Status : Master Locked
System Quality Level : eec1
Quality Level Selection : Enabled
Current Frequency Offset (ppm) : +0
Operating mode : automatic
Reference Input 1
Admin Status : up
Rx Quality Level : eec1
Qualified For Use : yes
Selected For Use : yes
Source Port : esat-1/1/c33/u1
Reference Input 2
Admin Status : up
Rx Quality Level : eec1
Qualified For Use : yes
Selected For Use : no
Not Selected Due To : on standby
Source Port : esat-1/1/c35/u1
===============================================================================
The following output is an example of Ethernet satellite synchronous interface timing information and Output fields: system satellite timing describes the fields.
A:node-2# show system satellite eth-sat 1 sync-if-timing
===============================================================================
Satellite esat-1 Synchronous Interface Timing Operational Information
===============================================================================
System Status : Master Holdover
System Quality Level : st3
Quality Level Selection : Enabled
Current Frequency Offset (ppm) : +0
Operating mode : manual
Reference Input 1
Admin Status : up
Rx Quality Level : eec1
Qualified For Use : yes
Selected For Use : no
Not Selected Due To : disabled
Source Port : esat-1/1/c1/1
Reference Input 2
Admin Status : up
Rx Quality Level : eec1
Qualified For Use : yes
Selected For Use : yes
Source Port : estat-1/1/c35/u1
===============================================================================|
Label |
Description |
|---|---|
|
System Status |
The system status |
|
System Quality Level |
The quality level being generated by the system clock |
|
Quality Level Selection |
The quality level selection status |
|
Current Frequency Offset (ppm) |
The offset that is applied within the central clock to align the local oscillator to the frequency of the selected input reference. The units for this value are parts per million (ppm). This value should not be misinterpreted as an indicator of the frequency accuracy of the output of the central clock. If the central clock is locked to a true Primary Reference Clock or Stratum 1 frequency reference, this value should report a number within the range [-5, +5] ppm. |
|
Operating mode |
The operating mode of the clock: automatic – no user configuration has been made to the clock configuration of the satellite, and it is operating with the default configuration manual – the user has modified the configuration in some way and all functionality must now be manually controlled |
|
Reference Input 1/2 |
|
|
Admin Status |
down — Indicates ref1 or ref2 configuration is administratively shutdown up — Indicates ref1 or ref2 configuration is administratively enabled diag — Indicates the reference has been forced using the force-reference command |
|
Rx Quality Level |
The QL value received on the interface:
|
|
Quality Level Override |
Indicates whether the QL value used to determine the reference was configured directly by the user |
|
Qualified for Use |
Indicates whether the reference has been qualified to be used as a source of timing for the node |
|
Not Qualified Due To |
The reason why the reference has not been qualified |
|
Selected for Use |
Indicates whether the method is presently selected |
|
Not Selected Due To |
The reason why the method is not selected:
|
|
Source Port |
The source port for the reference |
sync-if-timing
Syntax
sync-if-timing
Context
[Tree] (show>system sync-if-timing)
Full Context
show system sync-if-timing
Description
This command displays synchronous interface timing information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of synchronization interface timing information, and Output fields: synchronization interface timing describes the output fields.
The following output is an example of a node locked to the active BITS input and directing the signal on ref1 to the BITS output.
Output example*A:sasr_dutb>show>system# sync-if-timing
===============================================================================
System Interface Timing Operational Info
===============================================================================
System Status CPM A : Master Free Run
Reference Input Mode : Non-revertive
Quality Level Selection : Disabled
Reference Selected : none
System Quality Level : st3
Current Frequency Offset : +0 ppb
Input Minimum Quality Level : none
Wait to Restore Timer : Disabled
Reference Order : bits1 ref1 ref2 ptp
Reference Mate CPM
Qualified For Use : No
Not Qualified Due To : LOS
Selected For Use : No
Not Selected Due To : not qualified
Reference Input 1
Admin Status : down
Rx Quality Level : unknown
Quality Level Override : none
Qualified For Use : No
Not Qualified Due To : disabled
Selected For Use : No
Not Selected Due To : disabled
Source Port : None
Reference Input 2
Admin Status : down
Rx Quality Level : unknown
Quality Level Override : none
Qualified For Use : No
Not Qualified Due To : disabled
Selected For Use : No
Not Selected Due To : disabled
Source Port : None
Reference BITS 1A
Input Admin Status : down
Rx Quality Level : stu
Quality Level Override : none
Qualified For Use : No
Not Qualified Due To : disabled
Selected For Use : No
Not Selected Due To : disabled
Interface Type : DS1
Framing : ESF
Line Coding : B8ZS
Line Length : 0-110ft
Output Admin Status : down
Output Source : internal clock
Output Reference Selected : none
Tx Quality Level : N/A
Reference PTP
Admin Status : down
Rx Quality Level : unknown
Quality Level Override : none
Qualified For Use : No
Not Qualified Due To : disabled
Selected For Use : No
Not Selected Due To : disabled
===============================================================================
*A:sasr_dutb>show>system#
|
Label |
Description |
|---|---|
|
System Status CPM A |
Indicates the system status of CPM A |
| Current Frequency Offset | Displays frequency offset in parts per billion (ppb) |
|
Reference Input Mode |
Indicates the reference input mode |
|
Reference Order |
Indicates the reference order |
|
Reference Input 1 |
Displays information about Reference Input 1 |
|
Admin Status |
Indicates the Admin status of Reference Input 1 down — Indicates the ref1 or ref2 configuration is administratively shutdown up — Indicates the ref1 or ref2 configuration is administratively enabled diag — Indicates the reference has been forced using the force-reference command |
|
Qualified For Use |
Indicates if the Reference Input 1 is qualified for use |
|
Selected For Use |
Indicates if Reference Input 1 is selected for use |
|
Source Port |
The source port information |
|
Reference Input 2 |
Displays information about Reference Input 2 |
|
Admin Status |
Indicates the Admin status of Reference Input 2 down — Indicates the ref1 or ref2 configuration is administratively shutdown up — Indicates the ref1 or ref2 configuration is administratively enabled diag — Indicates the reference has been forced using the force-reference command |
|
Qualified For Use |
Indicates if the Reference Input 2 is qualified for use |
|
Selected For Use |
Indicates if Reference Input 2 is selected for use |
|
Not Selected Due To |
Indicates the reason if Reference Input 2 is not selected |
|
Source Port |
The source port information |
|
Interface Type |
The interface type configured for the BITS port |
|
Framing |
The framing configured for the BITS port |
|
Line Coding |
The line coding configured for the BITS port |
|
Line Length |
The line length value of the BITS output |
|
Output Admin Status |
down — The BITS output is administratively shutdown up — The BITS output is administratively enabled diag — Indicates the BITS output has been forced using the force-reference command |
|
Output Reference Selected |
The reference selected as the source for the BITS output signal (ref1 or ref2) |
|
TX Quality Level |
QL value for BITS output signal |
|
Quality Level Selection |
Indicates whether the ql-selection command is enabled or disabled If this command is enabled, the reference is selected first using the QL value, then by the priority reference order. If this command is not enabled, the reference is selected by the priority reference order. |
| Input Minimum Quality Level |
Indicates the minimum input quality level that the system clock can generate |
|
System Quality Level |
Indicates the quality level that the system clock can generate |
|
Rx Quality Level |
Indicates the QL value received on the interface inv — SSM received on the interface indicates an invalid code for the interface type unknown — No QL value was received on the interface |
| Wait to Restore Timer |
Indicates whether the wait-to-restore-timer command is enabled or disabled |
sync-if-timing
Syntax
sync-if-timing [cpm-slot]
Context
[Tree] (show>system sync-if-timing)
Full Context
show system sync-if-timing
Description
This command displays synchronous interface timing operational information.
Parameters
- cpm-slot
-
Specifies the system CPM slot.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of sync-if-timing information, and Output fields: system timing describes the output fields.
Output ExampleThe following system example shows:
-
sync-if timing, or
-
sync-if-timing "A” when the SETS reference on the active CPM-A locks to BITS A, or
-
sync-if-timing "B” when the SETS reference on the active CPM-B locks to BITS A
The following output applies only to the 7750 SR-1e/2e/3e and 7950 XRS-16/20/40 platforms.
*A:Dut-B# show system sync-if-timing or show system sync-if-timing "A"
===============================================================================
System Interface Timing Operational Info
===============================================================================
System Status CPM A : Master Locked
Reference Input Mode : Revertive
Quality Level Selection : Disabled
Reference Selected : BITS A
System Quality Level : prc
Current Frequency Offset (ppm) : +0
Input Minimum Quality Level : st3
Wait to Restore Timer : Disabled
Reference Order : bits ref1 ref2
Reference Input 1
Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Source Port : 1/1/5
Reference Input 2
Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Source Port : 3/1/5
Reference BITS A
Input Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : Yes
Interface Type : E1
Framing : PCM31 CRC
Line Coding : HDB3
SSM Bit : 8
Output Admin Status : up
Output Minimum Quality Level : st2
Output Source : line reference
Output Reference Selected : ref1
Output Squelch : Disabled
Tx Quality Level : prc
Reference BITS B
Input Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Interface Type : E1
Framing : PCM31 CRC
Line Coding : HDB3
SSM Bit : 8
Output Admin Status : up
Output Minimum Quality Level : st2
Output Source : line reference
Output Reference Selected : ref1
Output Squelch : Disabled
Tx Quality Level : prc
===============================================================================
The following system example shows:
-
sync-if timing standby, or
-
sync-if-timing "B” when the SETS reference on the standby CPM-B locks to Mate CPM (BITS A), or
-
sync-if-timing "A” when the SETS reference on the standby CPM-A locks to Mate CPM (BITS A)
The following output applies only to the 7750 SR-1e/2e/3e and 7950 XRS-16/20/40 platforms.
---------------------------------------------------------------------------
*A:Dut-B# show system sync-if-timing standby or show system sync-if-timing "B"
===============================================================================
System Interface Timing Operational Info
===============================================================================
System Status CPM B : Master Locked
Reference Input Mode : Revertive
Quality Level Selection : Disabled
Reference Selected : Mate CPM (BITS A)
System Quality Level : prc
Current Frequency Offset (ppm) : +0sync-if-timing "A
Input Minimum Quality Level : st3
Wait to Restore Timer : Disabled
Reference Order : bits ref1 ref2
Reference Mate CPM
Qualified For Use : Yes
Selected For Use : Yes
Reference Input 1
Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Source Port : 1/1/5
Reference Input 2
Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Source Port : 3/1/5
Reference BITS A
Input Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Interface Type : E1
Framing : PCM31 CRC
Line Coding : HDB3
SSM Bit : 8
Output Admin Status : up
Output Minimum Quality Level : st2
Output Source : line reference
Output Reference Selected : ref1
Output Squelch : Disabled
Tx Quality Level : prc
Reference BITS B
Input Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Interface Type : E1
Framing : PCM31 CRC
Line Coding : HDB3
SSM Bit : 8
Output Admin Status : up
Output Minimum Quality Level : st2
Output Source : line reference
Output Reference Selected : ref1
Output Squelch : Disabled
Tx Quality Level : prc
===============================================================================
The following system example shows:
-
sync-if timing, or
-
sync-if-timing "A” when the SETS reference on the active CPM-A locks to BITS B, or
-
sync-if-timing "B” when the SETS reference on the active CPM-B locks to BITS B
The following output applies only to the 7750 SR-1e/2e/3e and 7950 XRS-16/20/40 platforms.
--------------------------------------------------------------------
*A:Dut-B# show system sync-if-timing or show system sync-if-timing "A"
===============================================================================
System Interface Timing Operational Info
===============================================================================
System Status CPM A : Master Locked
Reference Input Mode : Non-revertive
Quality Level Selection : Disabled
Reference Selected : BITS B
System Quality Level : prc
Current Frequency Offset (ppm) : +0
Input Minimum Quality Level : st3
Wait to Restore Timer : Disabled
Reference Order : bits ref1 ref2
Reference Input 1
Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Source Port : 1/1/5
Reference Input 2
Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Source Port : 3/1/5
Reference BITS A
Input Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : previous failure
Interface Type : E1
Framing : PCM31 CRC
Line Coding : HDB3
SSM Bit : 8
Output Admin Status : up
Output Minimum Quality Level : st2
Output Source : line reference
Output Reference Selected : ref1
Output Squelch : Disabled
Tx Quality Level : prc
Reference BITS B
Input Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : Yes
Interface Type : E1
Framing : PCM31 CRC
Line Coding : HDB3
SSM Bit : 8
Output Admin Status : up
Output Minimum Quality Level : st2
Output Source : line reference
Output Reference Selected : ref1
Output Squelch : Disabled
Tx Quality Level : prc
===============================================================================
The following system example shows:
-
sync-if timing standby, or
-
sync-if-timing "B” when the SETS reference on the standby CPM-B locks to Mate CPM (BITS B), or
-
sync-if-timing "A” when the SETS reference on the standby CPM-A locks to Mate CPM (BITS B)
The following output applies only to the 7750 SR-1e/2e/3e and 7950 XRS-16/20/40 platforms.
--------------------------------------------------------------------
*A:Dut-B# show system sync-if-timing standby or show system sync-if-timing "B"
===============================================================================
System Interface Timing Operational Info
===============================================================================
System Status CPM B : Master Locked
Reference Input Mode : Non-revertive
Quality Level Selection : Disabled
Reference Selected : Mate CPM (BITS B)
System Quality Level : prc
Current Frequency Offset (ppm) : +0
Input Minimum Quality Level : st3
Wait to Restore Timer : Disabled
Reference Order : bits ref1 ref2
Reference Mate CPM
Qualified For Use : Yes
Selected For Use : Yes
Reference Input 1
Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Source Port : 1/1/5
Reference Input 2
Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Source Port : 3/1/5
Reference BITS A
Input Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : previous failure
Interface Type : E1
Framing : PCM31 CRC
Line Coding : HDB3
SSM Bit : 8
Output Admin Status : up
Output Minimum Quality Level : st2
Output Source : line reference
Output Reference Selected : ref1
Output Squelch : Disabled
Tx Quality Level : prc
Reference BITS B
Input Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Interface Type : E1
Framing : PCM31 CRC
Line Coding : HDB3
SSM Bit : 8
Output Admin Status : up
Output Minimum Quality Level : st2
Output Source : line reference
Output Reference Selected : ref1
Output Squelch : Disabled
Tx Quality Level : prc
===============================================================================
|
Label |
Description |
|---|---|
|
System Status CPM A/B |
Indicates the present status of the synchronous timing equipment subsystem (SETS). Not Present — Only shown on systems without central clocks Master Freerun — The clock is in free-run because it hasn’t had a qualified input reference to lock to Master Holdover — The clock was locked to an input reference but has lost all qualified input references and is in holdover. Master Locked — The clock is locked to an input reference Acquiring — The clock is training to a qualified input reference. |
|
Reference Input Mode |
Revertive — Indicates that for a re-validated or a newly validated reference source which has a higher priority than the currently selected reference has reverted to the new reference source. Non-revertive — The clock cannot revert to a higher priority clock if the current clock goes offline. |
|
Quality Level Selection |
Indicates whether the ql-selection command has been enabled or disabled. If this command is enabled, then the reference is selected first using the QL value, then by the priority reference order. If this command is not enabled, then the reference is selected by the priority reference order. |
|
Reference Selected |
Indicates which reference has been selected:
|
|
|
|
System Quality Level |
Indicates the quality level being generated by the system clock. |
|
Current Frequency Offset |
This value indicates the offset that is applied within the central clock to align the local oscillator to the frequency of the selected input reference. The units for this value are parts per million (ppm). This value should not be misinterpreted as an indicator of the frequency accuracy of the output of the central clock. If the central clock is locked to a true Primary Reference Clock or Stratum 1 frequency reference, this value should report a number within the range [-5, +5] ppm. |
|
Input Minimum Quality Level |
The configured minimum acceptable QL to consider for use by the central clock. |
|
Wait to Restore Timer |
The configured timeout to use for the Wait to Restore timer. |
|
Reference Order |
ref1, ref2, bits — Indicates that the priority order of the timing references. |
|
Reference Mate CPM |
Data within this block represents the status of the timing reference provided by the Mate CPM. This will be the BITS input from the standby CPM. |
|
Admin Status |
down — The ref1 or ref2 configuration is administratively shutdown. up — The ref1 or ref2 configuration is administratively enabled. diag — Indicates the reference has been forced using the force-reference command. |
|
Quality Level Override |
Indicates whether the QL value used to determine the reference was configured directly by the user. |
|
Rx Quality Level |
Indicates the QL value received on the interface.
|
|
Qualified for Use |
Indicates whether the reference has been qualified to be used as a source of timing for the node. |
|
Not Qualified Due To |
Indicates the reason why the reference has not been qualified:
|
|
Selected for Use |
Indicates whether the method is presently selected. |
|
Not Selected Due To |
Indicates the reason why the method is not selected:
|
|
Source Port |
Identifies the Source port for the reference. |
|
Interface Type |
The interface type configured for the BITS port. |
|
Framing |
The framing configured for the BITS port. |
|
Line Coding |
The line coding configured for the BITS port. |
|
Line Length |
The line length value of the BITS output. |
|
Output Admin Status |
down — The BITS output is administratively shutdown. up — The BITS output is administratively enabled. |
|
Output Minimum Quality Level |
The configured minimum acceptable QL to use for the BITSout signal. |
|
Output Source |
The source to be used to provide the signal on the BITS output port. line reference — unfiltered recovered line reference. internal clock — filtered node clock output. |
|
Output Reference Selected |
The reference selected as the source for the BITS output signal (ref1, ref2, or PTP). |
|
Output Squelch |
Indicates whether the squelch function for BITSout is enabled or disabled. |
|
TX Quality Level |
QL value for BITS output signal. |
sync-if-timing
Syntax
sync-if-timing {ref1 | ref2 | bits | bitsa | bitsb | gnss | gnssa | gnssb | synce | syncea | synceb }
Context
[Tree] (clear>system sync-if-timing)
Full Context
clear system sync-if-timing
Description
This command individually clears (re-enables) a previously failed reference. As long as the reference is one of the valid options, this command is always executed. An inherent behavior enables the revertive mode which causes a reevaluation of all available references.
The timing options may vary depending on the platform because not all options are supported on all platforms.
This command also clears the Wait-to-Restore state of the reference so that it can be selected.
Parameters
- ref1
-
Clears the first timing reference.
- ref2
-
Clears the second timing reference.
- bits
-
Clears the bits timing reference on the CPM.
- bitsa
-
Clears the BITS port timing reference of CPM A for redundant systems with a BITS port on each CPM.
- bitsb
-
Clears the BITS port timing reference of CPM B for redundant systems with a BITS port on each CPM.
- gnss
-
Clears the GNSS port timing reference. This keyword is only supported on 7750 SR single‑slot FP5 platforms.
- gnssa
-
Clears the GNSS port timing reference for the CPM in slot A. This keyword is only supported on 7750 SR-2se platforms.
- gnssb
-
Clears the GNSS port timing reference for the CPM in slot B. This keyword is only supported on 7750 SR-2se platforms.
- synce
-
Clears the SyncE/1588 port timing reference. This keyword is only supported on single slot systems.
- syncea
-
Clears the SyncE/1588 port of the CPM A timing reference. This keyword is only supported on platforms supporting redundant CPM.
- synceb
-
Clears the SyncE/1588 port of the CPM B timing reference. This keyword is only suported on platforms supporting redundant CPM.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
sync-if-timing
Syntax
sync-if-timing reference
Context
[Tree] (clear>system>satellite>eth-sat sync-if-timing)
Full Context
clear system satellite eth-sat sync-if-timing
Description
This command clears (re-enables) a previously failed reference on the Ethernet satellite.
Parameters
- reference
-
Specifies to clear the first or second timing reference.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
synchronization
synchronization
Syntax
synchronization
Context
[Tree] (show>redundancy synchronization)
Full Context
show redundancy synchronization
Description
This command displays redundancy synchronization times.
Platforms
All
Output
The following output is an example of redundancy synchronization information, and Output fields: synchronization describes the output fields.
Output ExampleA:ALA-1>show>redundancy# synchronization
===============================================================================
Synchronization Information
===============================================================================
Standby Status : disabled
Last Standby Failure : N/A
Standby Up Time : N/A
Failover Time : N/A
Failover Reason : N/A
Boot/Config Sync Mode : None
Boot/Config Sync Status : No synchronization
Last Config File Sync Time : Never
Last Boot Env Sync Time : Never
===============================================================================
A:ALA-1>show>redundancy#
|
Label |
Description |
|---|---|
|
Standby Status |
Displays the status of the standby CPM. |
|
Last Standby Failure |
Displays the timestamp of the last standby failure. |
|
Standby Up Time |
Displays the length of time the standby CPM has been up. |
|
Failover Time |
Displays the timestamp when the last redundancy failover occurred causing a switchover from active to standby CPM. If there is no redundant CPM card in this system or no failover has occurred since the system last booted, the value will be 0. |
|
Failover Reason |
Displays a text string giving an explanation of the cause of the last redundancy failover. If no failover has occurred, an empty string displays. |
|
Boot/Config Sync Mode |
Displays the type of synchronization operation to perform between the primary and secondary CPMs after a change has been made to the configuration files or the boot environment information contained in the boot options file (BOF). |
|
Boot/Config Sync Status |
Displays the results of the last synchronization operation between the primary and secondary CPMs. |
|
Last Config File Sync Time |
Displays the timestamp of the last successful synchronization of the configuration files. |
|
Last Boot Env Sync Time |
Displays the timestamp of the last successful synchronization of the boot environment files. |