interface
interface name string
- adapter
- model-number string
- type keyword
- vendor-manufacture-date string
- vendor-oui string
- vendor-part-number string
- vendor-serial-number string
+ admin-state keyword
+ breakout-mode
+ breakout-port-speed keyword
+ num-breakout-ports keyword
+ description string
+ ethernet
+ aggregate-id reference
+ auto-negotiate boolean
+ dac-link-training boolean
+ duplex-mode keyword
+ flow-control
+ receive boolean
+ forwarding-viable boolean
+ hold-time
+ down number
- down-expires string
+ up number
- up-expires string
- hw-mac-address string
+ l2cp-transparency
+ dot1x
- oper-rule keyword
+ tunnel boolean
+ lacp
- oper-rule keyword
+ tunnel boolean
+ lldp
- oper-rule keyword
+ tunnel boolean
+ ptp
- oper-rule keyword
+ tunnel boolean
+ tunnel-all-l2cp boolean
+ xstp
- oper-rule keyword
+ tunnel boolean
+ lacp-port-priority number
+ mac-address string
- physical-medium keyword
+ port-speed keyword
+ ptp-asymmetry number
+ reload-delay number
- reload-delay-expires string
+ standby-signaling keyword
- statistics
- in-1024b-to-1518b-frames number
- in-128b-to-255b-frames number
- in-1519b-or-longer-frames number
- in-256b-to-511b-frames number
- in-512b-to-1023b-frames number
- in-64b-frames number
- in-65b-to-127b-frames number
- in-crc-error-frames number
- in-fragment-frames number
- in-jabber-frames number
- in-mac-pause-frames number
- in-oversize-frames number
- last-clear string
- out-1024b-to-1518b-frames number
- out-128b-to-255b-frames number
- out-1519b-or-longer-frames number
- out-256b-to-511b-frames number
- out-512b-to-1023b-frames number
- out-64b-frames number
- out-65b-to-127b-frames number
- out-mac-pause-frames number
+ storm-control
+ broadcast-rate number
+ multicast-rate number
- operational-broadcast-rate number
- operational-multicast-rate number
- operational-unknown-unicast-rate number
+ units keyword
+ unknown-unicast-rate number
+ synce
+ ssm
+ admin-state keyword
- forwarding-complex reference
- ifindex number
+ lag
+ lacp
+ admin-key number
+ interval keyword
+ lacp-mode keyword
+ system-id-mac string
+ system-priority number
+ lacp-fallback-mode keyword
+ lacp-fallback-timeout number
- lag-speed number
+ lag-type keyword
- member name reference
- lacp
- activity keyword
- aggregatable boolean
- collecting boolean
- distributing boolean
- lacp-port-priority number
- oper-key number
- partner-id string
- partner-key number
- partner-port-num number
- port-num number
- statistics
- lacp-errors number
- lacp-in-pkts number
- lacp-out-pkts number
- lacp-rx-errors number
- lacp-tx-errors number
- lacp-unknown-errors number
- synchronization keyword
- system-id string
- timeout keyword
- last-change string
- microbfd-enabled boolean
- oper-down-reason keyword
- oper-state keyword
+ member-speed keyword
+ min-links number
- last-change string
- linecard reference
+ loopback-mode keyword
+ mtu number
- oper-down-reason keyword
- oper-state keyword
+ p4rt
+ id number
- parent-id number
- phy-group-members string
+ qos
+ output
+ queue queue-name (reference | keyword)
- active-queue-management
- ecn-slope ecn-drop-probability keyword
- max-probability number
- max-threshold-bytes number
- min-threshold-bytes number
- slope-enabled boolean
- wred-slope traffic-type keyword drop-probability keyword
- max-probability number
- max-threshold-bytes number
- min-threshold-bytes number
- slope-enabled boolean
- forwarding-class string
- queue-depth
- high-threshold-bytes number
- last-high-threshold-time string
- maximum-burst-size number
+ scheduling
- peak-rate-bps number
+ peak-rate-percent number
- scheduler-node reference
+ strict-priority boolean
+ weight number
+ template reference
+ voq-template reference
- queue-statistics
- queue queue-name (reference | keyword)
- last-clear string
- virtual-output-queue slot number
- dropped-octets
- high-drop-probability number
- low-drop-probability number
- medium-drop-probability number
- dropped-packets
- high-drop-probability number
- low-drop-probability number
- medium-drop-probability number
- forwarded-octets
- high-drop-probability number
- low-drop-probability number
- medium-drop-probability number
- forwarded-packets
- high-drop-probability number
- low-drop-probability number
- medium-drop-probability number
- queue-depth
- high-threshold-bytes number
- last-high-threshold-time string
+ scheduler
+ tier level number
+ node node-number number
+ strict-priority boolean
+ weight number
+ sflow
+ admin-state keyword
- statistics
- carrier-transitions number
- in-broadcast-packets number
- in-discarded-packets number
- in-error-packets number
- in-fcs-error-packets number
- in-multicast-packets number
- in-octets number
- in-packets number
- in-unicast-packets number
- last-clear string
- out-broadcast-packets number
- out-discarded-packets number
- out-error-packets number
- out-mirror-octets number
- out-mirror-packets number
- out-multicast-packets number
- out-octets number
- out-packets number
- out-unicast-packets number
+ subinterface index number
+ acl
+ input
+ ipv4-filter reference
+ ipv6-filter reference
+ mac-filter reference
+ output
+ ipv4-filter reference
+ ipv6-filter reference
+ mac-filter reference
+ admin-state keyword
+ anycast-gw
+ anycast-gw-mac string
- anycast-gw-mac-origin keyword
+ virtual-router-id number
+ bridge-table
+ discard-unknown-src-mac boolean
+ mac-duplication
+ action keyword
- duplicate-entries
- mac address string
- dup-detect-time string
- hold-down-time-remaining (keyword | number)
+ mac-learning
+ admin-state keyword
+ aging
+ admin-state keyword
- learnt-entries
- mac address string
- aging (number | keyword)
- last-update string
+ mac-limit
+ maximum-entries number
+ warning-threshold-pct number
- mac-table
- mac address string
- failed-slots number
- last-update string
- not-programmed-reason keyword
- type keyword
- statistics
- active-entries number
- failed-entries number
- mac-type type keyword
- active-entries number
- failed-entries number
- total-entries number
- total-entries number
+ description string
- ethernet-segment-association
- designated-forwarder boolean
- es-managed boolean
- ethernet-segment string
- ifindex number
+ ip-mtu number
+ ipv4
+ address ip-prefix string
+ anycast-gw boolean
- origin keyword
+ primary
- status keyword
+ admin-state keyword
+ allow-directed-broadcast boolean
+ arp
+ debug keyword
+ duplicate-address-detection boolean
+ evpn
+ advertise route-type keyword
+ host-route
+ populate route-type keyword
+ datapath-programming boolean
+ internal-tags
+ tag-set reference
+ learn-unsolicited boolean
+ neighbor ipv4-address string
- datapath-programming
- last-failed-complexes string
- status keyword
- expiration-time string
+ link-layer-address string
- origin keyword
+ proxy-arp boolean
+ timeout number
+ virtual-ipv4-discovery
+ address ipv4-address string
+ allowed-macs string
+ probe-bridged-subinterfaces string
+ probe-interval number
- statistics
- out-probe-packets number
- statistics
- out-total-probe-packets number
+ dhcp-client
+ trace-options
+ trace keyword
+ dhcp-relay
+ admin-state keyword
- dns-resolution
- server domain string
- last-update string
- resolved-ip-address (ipv4-address | ipv6-address)
+ gi-address string
+ network-instance reference
- oper-down-reason keyword
- oper-state keyword
+ option keyword
+ server (ipv4-address | domain-name)
- statistics
- client-packets-discarded number
- client-packets-received number
- client-packets-relayed number
- server-packets-discarded number
- server-packets-received number
- server-packets-relayed number
+ trace-options
+ trace keyword
+ use-gi-addr-as-src-ip-addr boolean
+ dhcp-server
+ admin-state keyword
- oper-state keyword
- statistics
- in-discarded-packets number
- in-error-packets number
- in-forwarded-octets number
- in-forwarded-packets number
- in-matched-ra-packets number
- in-octets number
- in-packets number
- in-terminated-octets number
- in-terminated-packets number
- last-clear string
- out-discarded-packets number
- out-error-packets number
- out-forwarded-octets number
- out-forwarded-packets number
- out-octets number
- out-originated-octets number
- out-originated-packets number
- out-packets number
+ ipv6
+ address ip-prefix string
+ anycast-gw boolean
- origin keyword
+ primary
- status keyword
+ type keyword
+ admin-state keyword
+ dhcp-client
+ trace-options
+ trace keyword
+ dhcp-relay
+ admin-state keyword
- dns-resolution
- server domain string
- last-update string
- resolved-ip-address (ipv4-address | ipv6-address)
+ network-instance reference
- oper-down-reason keyword
- oper-state keyword
+ option keyword
+ server (ipv6-address | domain-name)
+ source-address string
- statistics
- client-packets-discarded number
- client-packets-received number
- client-packets-relayed number
- server-packets-discarded number
- server-packets-received number
- server-packets-relayed number
+ trace-options
+ trace keyword
+ dhcpv6-server
+ admin-state keyword
- oper-state keyword
+ neighbor-discovery
+ debug keyword
+ duplicate-address-detection boolean
+ evpn
+ advertise route-type keyword
+ host-route
+ populate route-type keyword
+ datapath-programming boolean
+ internal-tags
+ tag-set reference
+ learn-unsolicited keyword
+ limit
+ log-only boolean
+ max-entries number
+ warning-threshold-pct number
+ neighbor ipv6-address string
- current-state keyword
- datapath-programming
- last-failed-complexes string
- status keyword
- is-router boolean
+ link-layer-address string
- next-state-time string
- origin keyword
+ proxy-nd boolean
+ reachable-time number
+ stale-time number
+ virtual-ipv6-discovery
+ address ipv6-address string
+ allowed-macs string
+ probe-bridged-subinterfaces string
+ probe-interval number
- statistics
- out-probe-packets number
- statistics
- out-total-probe-packets number
+ router-advertisement
+ debug keyword
+ router-role
+ admin-state keyword
+ current-hop-limit number
+ ip-mtu number
+ managed-configuration-flag boolean
+ max-advertisement-interval number
+ min-advertisement-interval number
+ other-configuration-flag boolean
+ prefix ipv6-prefix string
+ autonomous-flag boolean
+ on-link-flag boolean
+ preferred-lifetime (keyword | number)
+ valid-lifetime (keyword | number)
+ reachable-time number
+ retransmit-time number
+ router-lifetime number
- statistics
- in-discarded-packets number
- in-error-packets number
- in-forwarded-octets number
- in-forwarded-packets number
- in-matched-ra-packets number
- in-octets number
- in-packets number
- in-terminated-octets number
- in-terminated-packets number
- last-clear string
- out-discarded-packets number
- out-error-packets number
- out-forwarded-octets number
- out-forwarded-packets number
- out-octets number
- out-originated-octets number
- out-originated-packets number
- out-packets number
+ l2-mtu number
- last-change string
+ local-mirror-destination
+ admin-state keyword
- oper-state keyword
- mpls
- statistics
- in-discarded-packets number
- in-error-packets number
- in-forwarded-octets number
- in-forwarded-packets number
- in-octets number
- in-packets number
- last-clear string
- out-error-packets number
- out-forwarded-octets number
- out-forwarded-packets number
- out-octets number
- out-originated-octets number
- out-originated-packets number
- out-packets number
+ mpls-mtu number
- name string
- oper-down-reason keyword
- oper-state keyword
+ qos
+ input
+ classifiers
+ default-drop-probability keyword
+ default-forwarding-class (reference | keyword)
+ dot1p-policy reference
+ dscp-policy reference
+ ipv4-dscp-policy reference
+ ipv6-dscp-policy reference
+ mpls-traffic-class-policy reference
+ multifield
+ ipv4-policy reference
+ ipv6-policy reference
+ policer-templates
+ policer-template reference
+ output
+ rewrite-rules
+ dot1p-policy reference
+ dscp-policy reference
+ ipv4-dscp-policy reference
+ ipv6-dscp-policy reference
+ mpls-traffic-class-policy reference
+ ra-guard
+ policy reference
+ vlan-list vlan-id number
- statistics
- in-discarded-packets number
- in-error-packets number
- in-forwarded-octets number
- in-forwarded-packets number
- in-matched-ra-packets number
- in-octets number
- in-packets number
- in-terminated-octets number
- in-terminated-packets number
- last-clear string
- out-discarded-packets number
- out-error-packets number
- out-forwarded-octets number
- out-forwarded-packets number
- out-octets number
- out-originated-octets number
- out-originated-packets number
- out-packets number
+ type identityref
+ vlan
+ encap
+ single-tagged
+ vlan-id (number | keyword)
+ single-tagged-range
+ low-vlan-id range-low-vlan-id number
+ high-vlan-id number
+ untagged
+ tpid identityref
- traffic-rate
- in-bps number
- out-bps number
+ transceiver
- channel index number
- input-power
- high-alarm-condition boolean
- high-alarm-threshold decimal-number
- high-warning-condition boolean
- high-warning-threshold decimal-number
- latest-value decimal-number
- low-alarm-condition boolean
- low-alarm-threshold decimal-number
- low-warning-condition boolean
- low-warning-threshold decimal-number
- laser-bias-current
- high-alarm-condition boolean
- high-alarm-threshold decimal-number
- high-warning-condition boolean
- high-warning-threshold decimal-number
- latest-value decimal-number
- low-alarm-condition boolean
- low-alarm-threshold decimal-number
- low-warning-condition boolean
- low-warning-threshold decimal-number
- output-power
- high-alarm-condition boolean
- high-alarm-threshold decimal-number
- high-warning-condition boolean
- high-warning-threshold decimal-number
- latest-value decimal-number
- low-alarm-condition boolean
- low-alarm-threshold decimal-number
- low-warning-condition boolean
- low-warning-threshold decimal-number
- wavelength decimal-number
- connector-type keyword
- date-code string
+ ddm-events boolean
- ethernet-pmd string
- fault-condition boolean
- form-factor keyword
+ forward-error-correction keyword
- healthz
- last-unhealthy string
- status keyword
- unhealthy-count number
- input-power
- high-alarm-condition boolean
- high-alarm-threshold decimal-number
- high-warning-condition boolean
- high-warning-threshold decimal-number
- latest-value decimal-number
- low-alarm-condition boolean
- low-alarm-threshold decimal-number
- low-warning-condition boolean
- low-warning-threshold decimal-number
- laser-bias-current
- high-alarm-condition boolean
- high-alarm-threshold decimal-number
- high-warning-condition boolean
- high-warning-threshold decimal-number
- latest-value decimal-number
- low-alarm-condition boolean
- low-alarm-threshold decimal-number
- low-warning-condition boolean
- low-warning-threshold decimal-number
- oper-down-reason keyword
- oper-state keyword
- output-power
- high-alarm-condition boolean
- high-alarm-threshold decimal-number
- high-warning-condition boolean
- high-warning-threshold decimal-number
- latest-value decimal-number
- low-alarm-condition boolean
- low-alarm-threshold decimal-number
- low-warning-condition boolean
- low-warning-threshold decimal-number
- serial-number string
- temperature
- high-alarm-condition boolean
- high-alarm-threshold number
- high-warning-condition boolean
- high-warning-threshold number
- latest-value number
- low-alarm-condition boolean
- low-alarm-threshold number
- low-warning-condition boolean
- low-warning-threshold number
- maximum number
- maximum-time string
+ tx-laser boolean
- vendor string
- vendor-lot-number string
- vendor-part-number string
- vendor-revision string
- voltage
- high-alarm-condition boolean
- high-alarm-threshold decimal-number
- high-warning-condition boolean
- high-warning-threshold decimal-number
- latest-value decimal-number
- low-alarm-condition boolean
- low-alarm-threshold decimal-number
- low-warning-condition boolean
- low-warning-threshold decimal-number
- wavelength decimal-number
+ vlan-tagging boolean
interface Descriptions
interface name string
name string
| Description | The name of the interface Valid options are: irb<N>, N=0..255 lif-<lif_name> enp<bus>s<dev>f<fn>, bus=0..255, dev=0..31, fn=0..7 vhn-<vhn_name> lag<N>, N=1..128 [note1] lo<N>, N=0..255 mgmt0 mgmt0-standby ethernet-<slot>/<port> ethernet-<slot>/<mda>/<port> system0 <lif_name>=Linux interface name <vhn_name>=vhost interface name <slot>=slot number {1,2,3,..} <mda>=mda id {a,b,c,d} <port>=port id {1,2,3,..} [note1] N=1..32 for 7220-D1. N=1..64 for 7220-D2, 7220-D3, 7220-D5. N=1..127 for 7220-H2, 7220-H3. | |
| Context | interface name string | |
| String Length | 3 to 20 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
adapter
model-number string
| Description | Model information for the adapter This is the information as read from the EEPROM of the part. The string is expected to contain printable ASCII characters, but unprintable ASCII characters read from the EEPROM are not filtered out. | |
| Context | interface name string adapter model-number string | |
| Tree | model-number | |
| Configurable | False | |
| Platforms | Supported on all platforms |
type keyword
vendor-manufacture-date string
| Description | Vendor's date code. This is the information as read from the EEPROM of the part. | |
| Context | interface name string adapter vendor-manufacture-date string | |
| Tree | vendor-manufacture-date | |
| Configurable | False | |
| Platforms | Supported on all platforms |
vendor-oui string
| Description | Vendor's OUI which contains the IEEE company identifier for the vendor This is the information as read from the EEPROM of the part. A value of all zero indicates that the vendor OUI is unspecified. | |
| Context | interface name string adapter vendor-oui string | |
| Tree | vendor-oui | |
| Configurable | False | |
| Platforms | Supported on all platforms |
vendor-part-number string
| Description | Vendor's part number or product name of the adapter This is the information as read from the EEPROM of the part. An empty string indicates the vendor part number is unspecified. The string is expected to contain printable ASCII characters, but unprintable ASCII characters read from the EEPROM are not filtered out. | |
| Context | interface name string adapter vendor-part-number string | |
| Tree | vendor-part-number | |
| Configurable | False | |
| Platforms | Supported on all platforms |
vendor-serial-number string
| Description | Vendor's serial number of the adapter This is the information as read from the EEPROM of the part. An empty string indicates the vendor serial number is unspecified. The string is expected to contain printable ASCII characters, but unprintable ASCII characters read from the EEPROM are not filtered out. | |
| Context | interface name string adapter vendor-serial-number string | |
| Tree | vendor-serial-number | |
| Configurable | False | |
| Platforms | Supported on all platforms |
admin-state keyword
| Description | The configured, desired state of the interface | |
| Context | interface name string admin-state keyword | |
| Tree | admin-state | |
| Default | enable | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
breakout-mode
| Description | Configuration of breakout options. The 7220 D3 supports 4x10 and 4x25 breakout on ports 3-33. The 7220 D3L supports 4x10 and 4x25 breakout on ports 1-31. The 7220 H3 supports 2x100/4x100 breakout on ports 3-34. The 7220 H4 supports 4x100 breakout on ports 1-64. The 7220 D4 supports 4x100 breakout on ports 30-36. The 7220 D4 supports 4x25 breakout on ports 9, 15, 16 and 30-36. The 7220 D4 supports 4x10 breakout on ports 9, 15, 16 and 30-36. The 7220 D5 supports 4x10, 4x25 and 2x100/4x100 breakout on ports 1-32. 7250 IXR-6e/10e 36p QSFPDD IMM all port: 4x100GE and 2x100GE | |
| Context | interface name string breakout-mode | |
| Tree | breakout-mode | |
| Configurable | True | |
| Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10e, 7250 IXR-6e |
breakout-port-speed keyword
| Description | The speed of each breakout port | |
| Context | interface name string breakout-mode breakout-port-speed keyword | |
| Tree | breakout-port-speed | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10e, 7250 IXR-6e |
num-breakout-ports keyword
| Description | The number of breakout ports supported by this connector | |
| Context | interface name string breakout-mode num-breakout-ports keyword | |
| Tree | num-breakout-ports | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10e, 7250 IXR-6e |
description string
| Description | A user-configured description of the interface | |
| Context | interface name string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
ethernet
aggregate-id reference
| Description | lag interface with which this interface is associated | |
| Context | interface name string ethernet aggregate-id reference | |
| Tree | aggregate-id | |
| Reference | interface name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
auto-negotiate boolean
| Description | When set to true the interface uses auto-negotiation for speed, duplex and flow-control settings. When set to false, the transmission parameters are specified manually. | |
| Context | interface name string ethernet auto-negotiate boolean | |
| Tree | auto-negotiate | |
| Configurable | True | |
| Platforms | 7220 IXR-D1 |
dac-link-training boolean
| Description | If the system detects that the transceiver is connected to a DAC cable then a true setting enables link training for better link stastability. The link training setting must be the same at both ends of the DAC cable or else the link may not come up. | |
| Context | interface name string ethernet dac-link-training boolean | |
| Tree | dac-link-training | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H3, 7220 IXR-H4 |
duplex-mode keyword
| Description | When auto-negotiate is true, this sets the duplex mode that will be advertised to the peer. When auto-negotiate is false, this directly sets the duplex mode of the interface. | |
| Context | interface name string ethernet duplex-mode keyword | |
| Tree | duplex-mode | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1 |
flow-control
| Description | Enter the flow-control context | |
| Context | interface name string ethernet flow-control | |
| Tree | flow-control | |
| Configurable | True | |
| Platforms | Supported on all platforms |
receive boolean
| Description | When this is true PAUSE frames received on this interface are accepted and processed, and, if auto-negotiation is enabled it also causes the capability to receive PAUSE frames to be signaled to the peer (applicable only to ports 1-48 of the 7220 IXR-D1 and to mgmt0 and mgmt0-standby ports). When this is false PAUSE frames received on this interface are ignored, and, if auto-negotiation is enabled it causes the capability to receive PAUSE frames to be signaled to the peer as non-support (applicable only to ports 1-48 of the 7220 IXR-D1 and to mgmt0 and mgmt0-standby ports) | |
| Context | interface name string ethernet flow-control receive boolean | |
| Tree | receive | |
| Configurable | True | |
| Platforms | Supported on all platforms |
forwarding-viable boolean
| Description | If true: this LAG member link should be used for the transmission of traffic if all other LAG/port attributes allow it. If false: this LAG member link should not be used for the transmission of traffic. In all cases: This LAG member link should process any received frames when it is an active member link. L2 protocols such as LLDP, LACP and micro-BFD should continue to be sent and processed. | |
| Context | interface name string ethernet forwarding-viable boolean | |
| Tree | forwarding-viable | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
hold-time
down number
| Description | Holds link down events for the configured time. The hold-time down behavior is triggered with events that try to bring the ethernet interface down and can change quickly. It is not triggered with an admin-state disable event or interface disable due to other internal reasons (such as fabric unavailability). When running, the interface will not be brought down till the timer expires. The typical use of the hold-time down is to provide stability and avoid the protocols to advertise/withdraw messages if there are flapping optics. The hold-time down is aborted if the user does admin-state disable or if the interface is disabled due to other internal reasons that prevent the traffic to be forwarded on the interface. | |
| Context | interface name string ethernet hold-time down number | |
| Tree | down | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Configurable | True | |
| Platforms | Supported on all platforms |
down-expires string
| Description | The remaining time until the hold-time down expires and the interface goes operationally down. | |
| Context | interface name string ethernet hold-time down-expires string | |
| Tree | down-expires | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
up number
| Description | Holds link up events for the configured time. The hold-time up behavior is triggered with any event that tries to bring up the ethernet interface (interface admin-state enable, a reboot, etc). While the hold-time up is running, the transceiver laser will be enabled, however the higher layers will not be notified that the interface is operationally up until the timer expires. | |
| Context | interface name string ethernet hold-time up number | |
| Tree | up | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Configurable | True | |
| Platforms | Supported on all platforms |
up-expires string
| Description | The remaining time until the hold-time up expires and the interface comes up. | |
| Context | interface name string ethernet hold-time up-expires string | |
| Tree | up-expires | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
hw-mac-address string
| Description | The MAC address associated with the port | |
| Context | interface name string ethernet hw-mac-address string | |
| Tree | hw-mac-address | |
| Configurable | False | |
| Platforms | Supported on all platforms |
l2cp-transparency
| Description | Configuration and state of the Layer-2 Control Protocol transparency | |
| Context | interface name string ethernet l2cp-transparency | |
| Tree | l2cp-transparency | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
dot1x
oper-rule keyword
| Description | The operational state of the TCAM rule applied to ingress dot1x frames. | |
| Context | interface name string ethernet l2cp-transparency dot1x oper-rule keyword | |
| Tree | oper-rule | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
tunnel boolean
| Description | Configures if incoming dot1x frames are tunneled. Dot1x frames are identified by MAC DA 01-80-c2-00-00-03 and Ethertype 0x888e. | |
| Context | interface name string ethernet l2cp-transparency dot1x tunnel boolean | |
| Tree | tunnel | |
| Default | false | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
lacp
oper-rule keyword
| Description | The operational state of the TCAM rule applied to ingress LACP frames. | |
| Context | interface name string ethernet l2cp-transparency lacp oper-rule keyword | |
| Tree | oper-rule | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
tunnel boolean
| Description | Configures if incoming LACP frames are tunneled. LACP frames are identified by MAC DA 01-80-c2-00-00-02, Ethertype 0x8809 and slow-protocol sub-type 0x01. | |
| Context | interface name string ethernet l2cp-transparency lacp tunnel boolean | |
| Tree | tunnel | |
| Default | false | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
lldp
oper-rule keyword
| Description | The operational state of the TCAM rule applied to ingress LLDP frames. | |
| Context | interface name string ethernet l2cp-transparency lldp oper-rule keyword | |
| Tree | oper-rule | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
tunnel boolean
| Description | Configures if incoming LLDP frames are tunneled. LLDP frames are identified by MAC DA 01-80-c2-00-00-00 and Ethertype 0x88cc. | |
| Context | interface name string ethernet l2cp-transparency lldp tunnel boolean | |
| Tree | tunnel | |
| Default | false | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
ptp
oper-rule keyword
| Description | The operational state of the TCAM rule applied to ingress ptp frames. | |
| Context | interface name string ethernet l2cp-transparency ptp oper-rule keyword | |
| Tree | oper-rule | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
tunnel boolean
| Description | Configures if incoming ptp frames are tunneled. ptp frames are identified by MAC DA 01-80-c2-00-00-0e and Ethertype 0x88f7. | |
| Context | interface name string ethernet l2cp-transparency ptp tunnel boolean | |
| Tree | tunnel | |
| Default | false | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
tunnel-all-l2cp boolean
| Description | Configures the tunneling of all the L2CP protocols. When set to true this command triggers the installation of an ingress TCAM rule with the highest priority (above all the individual L2CP tunnel rules) which allows the forwarding of any Layer-2 Control Protocol coming into the interface. All the L2CP frames identified by MAC DA = 01:80:c2:00:00:0x or MAC DA = 01:80:c2:00:00:2x, with 'x' being any hex value, are tunneled. When set to false, all L2CP frames without a specific L2CP tunnel rule are discarded. | |
| Context | interface name string ethernet l2cp-transparency tunnel-all-l2cp boolean | |
| Tree | tunnel-all-l2cp | |
| Default | false | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
xstp
| Description | Container for the configuration of all the Spanning Tree Protocols. It includes Spanning Tree Protocol (STP), Rapid RSTP (RSTP) and Multiple STP (MSTP) | |
| Context | interface name string ethernet l2cp-transparency xstp | |
| Tree | xstp | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
oper-rule keyword
| Description | The operational state of the TCAM rule applied to ingress xSTP frames. | |
| Context | interface name string ethernet l2cp-transparency xstp oper-rule keyword | |
| Tree | oper-rule | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
tunnel boolean
| Description | Configures if incoming xSTP frames are tunneled. xSTP frames are identified by MAC DA 01-80-c2-00-00-00 and any Ethertype. | |
| Context | interface name string ethernet l2cp-transparency xstp tunnel boolean | |
| Tree | tunnel | |
| Default | false | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
lacp-port-priority number
| Description | Configure the port priority for LACP. This value is used to determine which port should be activated with LACP fallback mode. Lower values are more preferred. | |
| Context | interface name string ethernet lacp-port-priority number | |
| Tree | lacp-port-priority | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
mac-address string
| Description | MAC address of the interface If not configured, this is set to the hw-mac-address, which is populated depending on interface type: When deleted, will revert back to the value of hw-mac-address. | |
| Context | interface name string ethernet mac-address string | |
| Tree | mac-address | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
physical-medium keyword
| Description | Indicates the PHY supported by the RJ45 port. If the port is supported by a SFP, QSFP+, QSFP28 or QSFP-DD transceiver no value is populated in this leaf. | |
| Context | interface name string ethernet physical-medium keyword | |
| Tree | physical-medium | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
port-speed keyword
| Description | The speed of the port or channel The default speed of a port (when there is no configured value and auto-negotiation is disabled or unsupported) depends on the platform and port/connector number as follows: mgmt0 and mgmt0-standby ports: 1G J2 IMM ports 1-32: 100G J2 IMM ports 33-36: 100G 7220-D1 ports 1-48: 1G 7220-D1 ports 49-52: 10G 7220-D2/D2L ports 1-48: 25G 7220-D2/D2L ports 49-56: 100G 7220-D2L ports 57-58: 10G 7220-D3 ports 1-2: 10G 7220-D3 ethernet-1/[3-34]: 100G 7220-D3 ethernet-1/[3-33]/n: 25G 7220-D3L ethernet-1/[1-32]: 100G 7220-D3L ethernet-1/[1-31]/n: 25G 7220-D3L ports 33-34: 10G 7220-D4 ports 1-28: 100G 7220-D4 ports 29-36: 400G 7220-D5 ports 1-32: 400G 7220-D5 ports 33-38: 10G 7220-H2 ports 1-128: 100G 7220-H3 ports 1-2: 10G 7220-H3 ports 3-34: 400G 7220-H4 ports 1-64: 400G 7220-H4 ports 65-66: 10G Supported speeds: mgmt0 and mgmt0-standby ports: 1G J2 IMM ports 1-32: 40G, 100G [note1] J2 IMM ports 33-36: 40G, 100G, 400G 7220-D1 ports 1-48: 10M, 100M, 1G 7220-D1 ports 49-52: 10G 7220-D2/D2L ports 1-48: 1G, 10G, 25G [note2] 7220-D2 ports 49-56: 10G, 25G, 40G, 100G 7220-D2L ports 49-56: 10G, 25G, 40G, 100G 7220-D2L ports 57-58: 10G 7220-D3 ports 1-2: 10G 7220-D3 ethernet-1/[3-34]: 10G, 25G, 40G, 50G, 100G 7220-D3 ethernet-1/[3-33]/n: 10G, 25G 7220-D3L ethernet-1/[1-32]: 10G, 25G, 40G, 50G, 100G 7220-D3L ethernet-1/[1-31]/n: 10G, 25G 7220-D3L ports 33-34: 10G 7220-D4 ports 1-8: 40G, 100G 7220-D4 ports 9-28: 10G, 25G, 40G, 100G 7220-D4 ports 29-36: 10G, 25G, 40G, 100G, 400G 7220-D5 ports 1-32: 40G, 100G, 400G 7220-D5 ports 33-38: 10G 7220-H2 ports 1-128: 100G 7220-H3 ports 1-2: 10G 7220-H3 ports 3-34: 40G, 100G, 200G, 400G 7220-H4 ports 1-64: 40G, 100G, 400G 7220-H4 ports 65-66: 10G [note1] Ports 9-12 cannot operate at different port speeds (some at 40G and others at 100G). The required speed of ports 9-12 is based on the port-speed of the lowest-numbered configured port in this block; if any higher-numbered port in the block is configured with a different port speed that port will not come up. [note2] On 7220-D2: if one port in each consecutive group of 4 ports (1-4, 5-8, .. , 45-48) is 25G the other 3 ports must also be 25G; if one port in each consecutive group of 4 ports (1-4, 5-8, .. , 45-48) is 1G or 10G the other 3 ports must also be 1G or 10G. On 7220-D2L: if one port in each port group of 4 ports ({1, 2, 3, 6}, {4, 5, 7, 9}, {8, 10, 11, 12}, {13, 14, 15, 18}, {16, 17, 19, 21}, {20, 22, 23, 24}, {25, 26, 27, 30}, {28, 29, 31, 33}, {32, 34, 35, 36}, {37, 38, 39, 42}, {40, 41, 43, 45}, {44, 46, 47, 48}) is 25G the other 3 ports must also be 25G; if one port in each port group of 4 ports is 1G or 10G the other 3 ports must also be 1G or 10G. 7250 IXR details: If the interface corresponds to a connector that has no installed transceiver then the value is accepted without any checking or restriction, and info from state will display the configured value. Otherwise if the configured port-speed is NOT supported by the installed transceiver the port is forced operationally down. | |
| Context | interface name string ethernet port-speed keyword | |
| Tree | port-speed | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
ptp-asymmetry number
| Description | This command configures the PTP asymmetry delay on the Ethernet port This command is used to correct known asymmetry as part of time of day or phase recovery using PTP packets on both local and downstream PTP clocks. | |
| Context | interface name string ethernet ptp-asymmetry number | |
| Tree | ptp-asymmetry | |
| Default | 0 | |
| Units | nanoseconds | |
| Configurable | True | |
| Platforms | 7220 IXR-D5 |
reload-delay number
| Description | Configure reload-delay timer for Ethernet interfaces. The reload-delay timer starts when the associated XDP interface state is learned. While the timer is running, the interface transceiver laser is disabled to avoid attracting traffic from the connected device at the other end of the interface. The reload-delay timer should be used in multi-homing interfaces and be set to a value long enough to allow the system to recover all the network protocols upon reboot, before start attracting traffic from the multi-homed device. | |
| Context | interface name string ethernet reload-delay number | |
| Tree | reload-delay | |
| Range | 1 to 86400 | |
| Units | seconds | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
reload-delay-expires string
| Description | The remaining time until the reload-delay expires and the interface can go operationally up. | |
| Context | interface name string ethernet reload-delay-expires string | |
| Tree | reload-delay-expires | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
standby-signaling keyword
| Description | Indicates the standby-signaling used in the interface. An application using a port-based redundancy mechanism will trigger the standby signaling on the ethernet interface if the interface is selected as standby. | |
| Context | interface name string ethernet standby-signaling keyword | |
| Tree | standby-signaling | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
statistics
| Description | Enter the statistics context | |
| Context | interface name string ethernet statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-1024b-to-1518b-frames number
| Description | Number of received Ethernet frames that are 1024-1518 bytes in length | |
| Context | interface name string ethernet statistics in-1024b-to-1518b-frames number | |
| Tree | in-1024b-to-1518b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-128b-to-255b-frames number
| Description | Number of received Ethernet frames that are 128-255 bytes in length | |
| Context | interface name string ethernet statistics in-128b-to-255b-frames number | |
| Tree | in-128b-to-255b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-1519b-or-longer-frames number
| Description | Number of received Ethernet frames that are 1519 bytes or longer | |
| Context | interface name string ethernet statistics in-1519b-or-longer-frames number | |
| Tree | in-1519b-or-longer-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-256b-to-511b-frames number
| Description | Number of received Ethernet frames that are 256-511 bytes in length | |
| Context | interface name string ethernet statistics in-256b-to-511b-frames number | |
| Tree | in-256b-to-511b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-512b-to-1023b-frames number
| Description | Number of received Ethernet frames that are 512-1023 bytes in length | |
| Context | interface name string ethernet statistics in-512b-to-1023b-frames number | |
| Tree | in-512b-to-1023b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-64b-frames number
| Description | Number of received Ethernet frames that are exactly 64 bytes in length | |
| Context | interface name string ethernet statistics in-64b-frames number | |
| Tree | in-64b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-65b-to-127b-frames number
| Description | Number of received Ethernet frames that are 65-127 bytes in length | |
| Context | interface name string ethernet statistics in-65b-to-127b-frames number | |
| Tree | in-65b-to-127b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-crc-error-frames number
| Description | Number of receive error events due to FCS/CRC check failure | |
| Context | interface name string ethernet statistics in-crc-error-frames number | |
| Tree | in-crc-error-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-fragment-frames number
| Description | Number of fragment frames received on the interface | |
| Context | interface name string ethernet statistics in-fragment-frames number | |
| Tree | in-fragment-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-jabber-frames number
| Description | Number of jabber frames received on the interface. Jabber frames are typically defined as oversize frames which also have a bad CRC | |
| Context | interface name string ethernet statistics in-jabber-frames number | |
| Tree | in-jabber-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-mac-pause-frames number
| Description | Number of MAC layer PAUSE frames received on the interface. | |
| Context | interface name string ethernet statistics in-mac-pause-frames number | |
| Tree | in-mac-pause-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-oversize-frames number
| Description | Number of oversize frames received on the interface (i.e. frames that exceed the operational port MTU) | |
| Context | interface name string ethernet statistics in-oversize-frames number | |
| Tree | in-oversize-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-clear string
| Description | Timestamp of the last time the MAC counters were cleared | |
| Context | interface name string ethernet statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-1024b-to-1518b-frames number
| Description | Number of transmitted Ethernet frames that are 1024-1518 bytes in length | |
| Context | interface name string ethernet statistics out-1024b-to-1518b-frames number | |
| Tree | out-1024b-to-1518b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-128b-to-255b-frames number
| Description | Number of transmitted Ethernet frames that are 128-255 bytes in length | |
| Context | interface name string ethernet statistics out-128b-to-255b-frames number | |
| Tree | out-128b-to-255b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-1519b-or-longer-frames number
| Description | Number of transmitted Ethernet frames that are 1519 bytes or longer | |
| Context | interface name string ethernet statistics out-1519b-or-longer-frames number | |
| Tree | out-1519b-or-longer-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-256b-to-511b-frames number
| Description | Number of transmitted Ethernet frames that are 256-511 bytes in length | |
| Context | interface name string ethernet statistics out-256b-to-511b-frames number | |
| Tree | out-256b-to-511b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-512b-to-1023b-frames number
| Description | Number of transmitted Ethernet frames that are 512-1023 bytes in length | |
| Context | interface name string ethernet statistics out-512b-to-1023b-frames number | |
| Tree | out-512b-to-1023b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-64b-frames number
| Description | Number of transmitted Ethernet frames that are exactly 64 bytes in length | |
| Context | interface name string ethernet statistics out-64b-frames number | |
| Tree | out-64b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-65b-to-127b-frames number
| Description | Number of transmitted Ethernet frames that are 65-127 bytes in length | |
| Context | interface name string ethernet statistics out-65b-to-127b-frames number | |
| Tree | out-65b-to-127b-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-mac-pause-frames number
| Description | Number of MAC layer PAUSE frames sent on the interface | |
| Context | interface name string ethernet statistics out-mac-pause-frames number | |
| Tree | out-mac-pause-frames | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
storm-control
| Description | Enable the storm-control context | |
| Context | interface name string ethernet storm-control | |
| Tree | storm-control | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
broadcast-rate number
| Description | The maximum rate allowed for ingress broadcast frames on the interface | |
| Context | interface name string ethernet storm-control broadcast-rate number | |
| Tree | broadcast-rate | |
| Range | 0 to 100000000 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
multicast-rate number
| Description | The maximum rate allowed for ingress multicast frames on the interface | |
| Context | interface name string ethernet storm-control multicast-rate number | |
| Tree | multicast-rate | |
| Range | 0 to 100000000 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
operational-broadcast-rate number
| Description | The operational maximum rate for ingress broadcast frames programmed on the interface | |
| Context | interface name string ethernet storm-control operational-broadcast-rate number | |
| Tree | operational-broadcast-rate | |
| Units | kbps | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
operational-multicast-rate number
| Description | The operational maximum rate for ingress multicast frames programmed on the interface | |
| Context | interface name string ethernet storm-control operational-multicast-rate number | |
| Tree | operational-multicast-rate | |
| Units | kbps | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
operational-unknown-unicast-rate number
| Description | The operational maximum rate for ingress unknown unicast frames programmed on the interface | |
| Context | interface name string ethernet storm-control operational-unknown-unicast-rate number | |
| Tree | operational-unknown-unicast-rate | |
| Units | kbps | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
units keyword
| Description | Units of storm-control policer in kbps or percentage of the interface bandwidth | |
| Context | interface name string ethernet storm-control units keyword | |
| Tree | units | |
| Default | percentage | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
unknown-unicast-rate number
| Description | The maximum rate allowed for ingress unknown unicast frames on the interface | |
| Context | interface name string ethernet storm-control unknown-unicast-rate number | |
| Tree | unknown-unicast-rate | |
| Range | 0 to 100000000 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
synce
ssm
admin-state keyword
| Description | Configure the administrative state for SyncE in line/client ports. When enabled, the assoicated transmit and receiver ports are set to synchronous mode and ESMC/SSM processing is enabled. Otherwise, all syncE functions are disabled in the port. | |
| Context | interface name string ethernet synce ssm admin-state keyword | |
| Tree | admin-state | |
| Default | disable | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D5 |
forwarding-complex reference
| Description | The forwarding-complex on which this interface resides This field is not populated for non-forwarding-complex-attached interfaces, for example mgmt0. | |
| Context | interface name string forwarding-complex reference | |
| Tree | forwarding-complex | |
| Reference | platform linecard slot number forwarding-complex name keyword | |
| Configurable | False | |
| Platforms | Supported on all platforms |
ifindex number
lag
lacp
| Description | LACP parameters for the associated LAG | |
| Context | interface name string lag lacp | |
| Tree | lacp | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
admin-key number
| Description | Configure the LACP admin-key to be advertised by the local system. If this value is not specified a value starting from 32768 is automatically assigned by the system. | |
| Context | interface name string lag lacp admin-key number | |
| Tree | admin-key | |
| Range | 1 to 65535 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
interval keyword
| Description | Set the period between LACP messages -- uses the lacp-period-type enumeration. | |
| Context | interface name string lag lacp interval keyword | |
| Tree | interval | |
| Default | SLOW | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp-mode keyword
| Description | ACTIVE is to initiate the transmission of LACP packets. PASSIVE is to wait for peer to initiate the transmission of LACP packets. | |
| Context | interface name string lag lacp lacp-mode keyword | |
| Tree | lacp-mode | |
| Default | ACTIVE | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
system-id-mac string
| Description | The MAC address portion of the node's System ID. This is combined with the system priority to construct the 8-octet system-id. If not configured, the system-ID configured at the system/ level is used. | |
| Context | interface name string lag lacp system-id-mac string | |
| Tree | system-id-mac | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
system-priority number
| Description | System priority used by the node on this LAG interface. Lower value is higher priority for determining which node is the controlling system. If not configured, the system-priority configured at the system/ level is used. | |
| Context | interface name string lag lacp system-priority number | |
| Tree | system-priority | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp-fallback-mode keyword
| Description | Specifies lacp-fallback mode if enabled | |
| Context | interface name string lag lacp-fallback-mode keyword | |
| Tree | lacp-fallback-mode | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp-fallback-timeout number
| Description | Specifies the LACP-fallback timeout interval in seconds | |
| Context | interface name string lag lacp-fallback-timeout number | |
| Tree | lacp-fallback-timeout | |
| Range | 4 to 3600 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lag-speed number
| Description | reports current aggregate bandwidth speed of the associated LAG | |
| Context | interface name string lag lag-speed number | |
| Tree | lag-speed | |
| Units | Mbps | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lag-type keyword
| Description | Sets the type of LAG, i.e., how it is configured / maintained | |
| Context | interface name string lag lag-type keyword | |
| Tree | lag-type | |
| Default | static | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
member name reference
| Description | Reports the list of interfaces associated with the LAG instance | |
| Context | interface name string lag member name reference | |
| Tree | member | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
name reference
| Description | Enter the name context | |
| Context | interface name string lag member name reference | |
| Reference | interface name string | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp
| Description | Operational status data for the member interfaces | |
| Context | interface name string lag member name reference lacp | |
| Tree | lacp | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
activity keyword
| Description | Indicates participant is active or passive | |
| Context | interface name string lag member name reference lacp activity keyword | |
| Tree | activity | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
aggregatable boolean
| Description | A true value indicates that the participant will allow the link to be used as part of the aggregate. A false value indicates the link should be used as an individual link | |
| Context | interface name string lag member name reference lacp aggregatable boolean | |
| Tree | aggregatable | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
collecting boolean
| Description | If true, the participant is collecting incoming frames on the link, otherwise false | |
| Context | interface name string lag member name reference lacp collecting boolean | |
| Tree | collecting | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
distributing boolean
| Description | When true, the participant is distributing outgoing frames; when false, distribution is disabled | |
| Context | interface name string lag member name reference lacp distributing boolean | |
| Tree | distributing | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp-port-priority number
| Description | Configure the port priority for LACP. This value is used to determine which port should be activated with LACP fallback mode. Lower values are more preferred. | |
| Context | interface name string lag member name reference lacp lacp-port-priority number | |
| Tree | lacp-port-priority | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
oper-key number
| Description | Current operational value of the key for the aggregate interface | |
| Context | interface name string lag member name reference lacp oper-key number | |
| Tree | oper-key | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
partner-id string
| Description | MAC address representing the protocol partner's interface system ID | |
| Context | interface name string lag member name reference lacp partner-id string | |
| Tree | partner-id | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
partner-key number
| Description | Operational value of the protocol partner's key | |
| Context | interface name string lag member name reference lacp partner-key number | |
| Tree | partner-key | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
partner-port-num number
| Description | Port number of the partner (remote) port for this member port | |
| Context | interface name string lag member name reference lacp partner-port-num number | |
| Tree | partner-port-num | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
port-num number
| Description | Port number of the local (actor) aggregation member | |
| Context | interface name string lag member name reference lacp port-num number | |
| Tree | port-num | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
statistics
| Description | LACP protocol counters | |
| Context | interface name string lag member name reference lacp statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp-errors number
| Description | Number of LACPDU illegal packet errors | |
| Context | interface name string lag member name reference lacp statistics lacp-errors number | |
| Tree | lacp-errors | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp-in-pkts number
| Description | Number of LACPDUs received | |
| Context | interface name string lag member name reference lacp statistics lacp-in-pkts number | |
| Tree | lacp-in-pkts | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp-out-pkts number
| Description | Number of LACPDUs transmitted | |
| Context | interface name string lag member name reference lacp statistics lacp-out-pkts number | |
| Tree | lacp-out-pkts | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp-rx-errors number
| Description | Number of LACPDU receive packet errors | |
| Context | interface name string lag member name reference lacp statistics lacp-rx-errors number | |
| Tree | lacp-rx-errors | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp-tx-errors number
| Description | Number of LACPDU transmit packet errors | |
| Context | interface name string lag member name reference lacp statistics lacp-tx-errors number | |
| Tree | lacp-tx-errors | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
lacp-unknown-errors number
| Description | Number of LACPDU unknown packet errors | |
| Context | interface name string lag member name reference lacp statistics lacp-unknown-errors number | |
| Tree | lacp-unknown-errors | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
synchronization keyword
| Description | Indicates whether the participant is in-sync or out-of-sync | |
| Context | interface name string lag member name reference lacp synchronization keyword | |
| Tree | synchronization | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
system-id string
| Description | MAC address that defines the local system ID for the aggregate interface | |
| Context | interface name string lag member name reference lacp system-id string | |
| Tree | system-id | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
timeout keyword
| Description | The timeout type (short or long) used by the participant | |
| Context | interface name string lag member name reference lacp timeout keyword | |
| Tree | timeout | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
last-change string
| Description | The date and time of the most recent change to the LAG member-link state | |
| Context | interface name string lag member name reference last-change string | |
| Tree | last-change | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
microbfd-enabled boolean
| Description | Indicates if microBFD is currently used in the determination of the member-link oper-status | |
| Context | interface name string lag member name reference microbfd-enabled boolean | |
| Tree | microbfd-enabled | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
oper-down-reason keyword
| Description | Reason for operational down state for the associated LAG | |
| Context | interface name string lag member name reference oper-down-reason keyword | |
| Tree | oper-down-reason | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
oper-state keyword
| Description | Operational state for the associated LAG | |
| Context | interface name string lag member name reference oper-state keyword | |
| Tree | oper-state | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
member-speed keyword
| Description | Specifies the link speed of allowed member-links | |
| Context | interface name string lag member-speed keyword | |
| Tree | member-speed | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
min-links number
| Description | Specifies the mininum number of member interfaces that must be active for the aggregate interface to be available | |
| Context | interface name string lag min-links number | |
| Tree | min-links | |
| Range | 1 to 64 | |
| Default | 1 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
last-change string
| Description | The date and time of the most recent change to the interface state | |
| Context | interface name string last-change string | |
| Tree | last-change | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
linecard reference
| Description | The linecard on which this interface resides This field is not populated for non-forwarding-complex-attached interfaces, for example mgmt0. | |
| Context | interface name string linecard reference | |
| Tree | linecard | |
| Reference | platform linecard slot number | |
| Configurable | False | |
| Platforms | Supported on all platforms |
loopback-mode keyword
| Description | Loopback mode of the port | |
| Context | interface name string loopback-mode keyword | |
| Tree | loopback-mode | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
mtu number
| Description | Port MTU in bytes including ethernet overhead but excluding 4-bytes FCS If a transmitted packet exceeds this size it is dropped. The default value for ethernet-x interfaces is taken from /system/mtu/default-port-mtu. For the mgmt0 and mgmt0-standby interfaces the default is 1514 bytes, but the value can be changed for each interface individually. Port MTU is not configurable for loopback interfaces. The max mtu for the mgmt0 and mgmt0-standby interfaces is 9216. The 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D3, 7220 IXR-H2, and 7220 IXR-H3 systems support a maximum port MTU of 9412 bytes and minimum of 1500 bytes. All other systems support a maximum port MTU of 9500 and minimum of 1500 bytes. Each 7250 IXR IMM supports a maximum of 8 different port MTU values. 7220 IXR systems do not have any limit on the maximum number of different port MTU values. | |
| Context | interface name string mtu number | |
| Tree | mtu | |
| Range | 1450 to 9500 | |
| Units | bytes | |
| Configurable | True | |
| Platforms | Supported on all platforms |
oper-down-reason keyword
| Description | The first (and possibly only) reason for the port being operationally down | |
| Context | interface name string oper-down-reason keyword | |
| Tree | oper-down-reason | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
oper-state keyword
| Description | The operational state of the interface | |
| Context | interface name string oper-state keyword | |
| Tree | oper-state | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
p4rt
id number
| Description | The numeric identifier used by the controller to address the interface This ID is the interface ifIndex by default, or is assigned by an external-to-the-device entity (e.g., an SDN management system) to establish an externally deterministic numeric reference for the interface. The programming entity must ensure that the ID is unique within the required context. Note that this identifier is used only when a numeric reference to the interface is required, it does not replace the unique name assigned to the interface. | |
| Context | interface name string p4rt id number | |
| Tree | id | |
| Range | 1 to 4294967295 | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
parent-id number
| Description | The numeric ID used by the controller to address the ASIC this interface resides on This is the ID configured at /platform/linecard/forwarding-complex/p4rt/id. This ID may be referred to as a 'device', 'node' or 'target' by the P4RT specification. Each switching ASIC (i.e., node) is addressed by the external entity based on its numeric identifier. | |
| Context | interface name string p4rt parent-id number | |
| Tree | parent-id | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
phy-group-members string
| Description | The group of interfaces sharing a phy with this interface On the 7220 IXR-D2 and 7220 IXR-D2L platforms this group of interfaces must be set to the same speed, either 1/10G or 25G. | |
| Context | interface name string phy-group-members string | |
| Tree | phy-group-members | |
| Configurable | False | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L |
qos
output
queue queue-name (reference | keyword)
queue-name (reference | keyword)
| Description | The queue name | |
| Context | interface name string qos output queue queue-name (reference | keyword) | |
| Options |
| |
| Reference | qos queues queue name string | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
active-queue-management
| Description | Enter the active-queue-management context | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management | |
| Tree | active-queue-management | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
ecn-slope ecn-drop-probability keyword
| Description | List of ECN slopes. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management ecn-slope ecn-drop-probability keyword | |
| Tree | ecn-slope | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
ecn-drop-probability keyword
| Description | The drop probability to which the ECN slope applies. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management ecn-slope ecn-drop-probability keyword | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
max-probability number
| Description | The maximum probability of marking a packet (at or above the max-threshold). On 7250 IXR-6/10 there can be a significant difference between the configured value and the operational value. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management ecn-slope ecn-drop-probability keyword max-probability number | |
| Tree | max-probability | |
| Range | 0 to 100 | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
max-threshold-bytes number
| Description | The queue depth in bytes that corresponds to the ECN maximum threshold parameter. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management ecn-slope ecn-drop-probability keyword max-threshold-bytes number | |
| Tree | max-threshold-bytes | |
| Units | bytes | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
min-threshold-bytes number
| Description | The queue depth in bytes that corresponds to the ECN mininum threshold parameter. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management ecn-slope ecn-drop-probability keyword min-threshold-bytes number | |
| Tree | min-threshold-bytes | |
| Units | bytes | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
slope-enabled boolean
| Description | Reads true if the slope is enabled. A disabled slope has min-threshold-bytes = max-threshold-bytes = max-probability = 0 | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management ecn-slope ecn-drop-probability keyword slope-enabled boolean | |
| Tree | slope-enabled | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
wred-slope traffic-type keyword drop-probability keyword
| Description | List of WRED slopes. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management wred-slope traffic-type keyword drop-probability keyword | |
| Tree | wred-slope | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
traffic-type keyword
| Description | The traffic type to which the WRED slope applies. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management wred-slope traffic-type keyword drop-probability keyword | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
drop-probability keyword
| Description | The drop probability to which the WRED slope applies. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management wred-slope traffic-type keyword drop-probability keyword | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
max-probability number
| Description | The maximum probability of dropping a packet (at or above the max-threshold). On 7250 IXR-6/10 there can be a significant difference between the configured value and the operational value. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management wred-slope traffic-type keyword drop-probability keyword max-probability number | |
| Tree | max-probability | |
| Range | 0 to 100 | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
max-threshold-bytes number
| Description | The queue depth in bytes that corresponds to the WRED maximum threshold parameter. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management wred-slope traffic-type keyword drop-probability keyword max-threshold-bytes number | |
| Tree | max-threshold-bytes | |
| Units | bytes | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
min-threshold-bytes number
| Description | The queue depth in bytes that corresponds to the WRED mininum threshold parameter. | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management wred-slope traffic-type keyword drop-probability keyword min-threshold-bytes number | |
| Tree | min-threshold-bytes | |
| Units | bytes | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
slope-enabled boolean
| Description | Reads true if the slope is enabled. A disabled slope has min-threshold-bytes = max-threshold-bytes = max-probability = 0 | |
| Context | interface name string qos output queue queue-name (reference | keyword) active-queue-management wred-slope traffic-type keyword drop-probability keyword slope-enabled boolean | |
| Tree | slope-enabled | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
forwarding-class string
| Description | The list of forwarding classes that map to this queue. | |
| Context | interface name string qos output queue queue-name (reference | keyword) forwarding-class string | |
| Tree | forwarding-class | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
queue-depth
| Description | Enter the queue-depth context | |
| Context | interface name string qos output queue queue-name (reference | keyword) queue-depth | |
| Tree | queue-depth | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
high-threshold-bytes number
| Description | The operational hardware value of the high threshold in bytes. | |
| Context | interface name string qos output queue queue-name (reference | keyword) queue-depth high-threshold-bytes number | |
| Tree | high-threshold-bytes | |
| Units | bytes | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D4/D5 |
last-high-threshold-time string
| Description | The last time the queue depth exceeded the high-threshold in a rising direction. | |
| Context | interface name string qos output queue queue-name (reference | keyword) queue-depth last-high-threshold-time string | |
| Tree | last-high-threshold-time | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D5 |
maximum-burst-size number
| Description | Maximum queue depth in bytes. | |
| Context | interface name string qos output queue queue-name (reference | keyword) queue-depth maximum-burst-size number | |
| Tree | maximum-burst-size | |
| Units | bytes | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
scheduling
| Description | Container for queue scheduling parameters | |
| Context | interface name string qos output queue queue-name (reference | keyword) scheduling | |
| Tree | scheduling | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
peak-rate-bps number
| Description | The actual/operational peak rate in bits per second. | |
| Context | interface name string qos output queue queue-name (reference | keyword) scheduling peak-rate-bps number | |
| Tree | peak-rate-bps | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
peak-rate-percent number
| Description | The maximum percentage of port bandwidth that is available to the traffic in this queue during the PIR scheduling loop. The default is 100. | |
| Context | interface name string qos output queue queue-name (reference | keyword) scheduling peak-rate-percent number | |
| Tree | peak-rate-percent | |
| Range | 1 to 100 | |
| Default | 100 | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
scheduler-node reference
| Description | The scheduler node to which the queue is connected. The mappings are fixed and not user-configurable. J2: unicast-0..unicast-7 -> node 1 multicast-0..multicast-7 -> node 0 TD3 (D2/D3/D5): unicast-x -> node x multicast-x -> node x TH3: unicast-0 -> node 1 unicast-1 -> node 2 unicast-2 -> node 4 unicast-3 -> node 5 unicast-4 -> node 7 unicast-5 -> node 8 unicast-6 -> node 10 unicast-7 -> node 11 multicast-0 -> node 0 multicast-1 -> node 3 multicast-2 -> node 6 multicast-3 -> node 9 | |
| Context | interface name string qos output queue queue-name (reference | keyword) scheduling scheduler-node reference | |
| Tree | scheduler-node | |
| Reference | interface name string qos output scheduler tier level number node node-number number | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
strict-priority boolean
| Description | When set to true the queue is serviced as a strict priority queue, regardless of whether a weight is configured or its value. When set to false the queue is serviced using WRR, even if the queue does not have a configured weight; in this case the default weight value of 1 is used. For unicast queues the implicit default value is true | |
| Context | interface name string qos output queue queue-name (reference | keyword) scheduling strict-priority boolean | |
| Tree | strict-priority | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
weight number
| Description | Configures the relative weight of a DWRR queue. For unicast queues the implicit default value is 1 | |
| Context | interface name string qos output queue queue-name (reference | keyword) scheduling weight number | |
| Tree | weight | |
| Range | 1 to 255 | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
template reference
| Description | The name of a queue-template to apply to the queue. If a queue has no queue-template, the default queue-template is applied. The user cannot modify the default queue-template. | |
| Context | interface name string qos output queue queue-name (reference | keyword) template reference | |
| Tree | template | |
| Reference | qos string | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4 |
voq-template reference
| Description | The name of a queue-template to apply to the set of associated VOQs. If a queue has no voq-template, the default queue-template is applied | |
| Context | interface name string qos output queue queue-name (reference | keyword) voq-template reference | |
| Tree | voq-template | |
| Reference | qos string | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
queue-statistics
| Description | Enter the queue-statistics context | |
| Context | interface name string qos output queue-statistics | |
| Tree | queue-statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
queue queue-name (reference | keyword)
| Description | List of queues. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) | |
| Tree | queue | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
queue-name (reference | keyword)
| Description | The queue name | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) | |
| Options |
| |
| Reference | qos queues queue name string | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
last-clear string
| Description | Timestamp of the last time the statistics associated with this queue were cleared | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
virtual-output-queue slot number
| Description | List of virtual output queues that can send traffic to this egress queue. The list always has one entry for each IMM slot in the chassis, even if one or more slots are empty. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number | |
| Tree | virtual-output-queue | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
slot number
| Description | The slot identifier for the virtual output queue. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number | |
| Range | 1 to 8 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
dropped-octets
| Description | Enter the dropped-octets context | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number dropped-octets | |
| Tree | dropped-octets | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
high-drop-probability number
| Description | The number of octets in unicast packets dropped in the VOQ due to the congestion at the egress port/queue that were classified as high drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number dropped-octets high-drop-probability number | |
| Tree | high-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
low-drop-probability number
| Description | The number of octets in unicast packets dropped in the VOQ due to the congestion at the egress port/queue that were classified as low drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number dropped-octets low-drop-probability number | |
| Tree | low-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
medium-drop-probability number
| Description | The number of octets in unicast packets dropped in the VOQ due to the congestion at the egress port/queue that were classified as medium drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number dropped-octets medium-drop-probability number | |
| Tree | medium-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
dropped-packets
| Description | Enter the dropped-packets context | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number dropped-packets | |
| Tree | dropped-packets | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
high-drop-probability number
| Description | The number of unicast packets dropped in the VOQ due to the congestion at the egress port/queue that were classified as high drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number dropped-packets high-drop-probability number | |
| Tree | high-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
low-drop-probability number
| Description | The number of unicast packets dropped in the VOQ due to the congestion at the egress port/queue that were classified as low drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number dropped-packets low-drop-probability number | |
| Tree | low-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
medium-drop-probability number
| Description | The number of unicast packets dropped in the VOQ due to the congestion at the egress port/queue that were classified as medium drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number dropped-packets medium-drop-probability number | |
| Tree | medium-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
forwarded-octets
| Description | Enter the forwarded-octets context | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number forwarded-octets | |
| Tree | forwarded-octets | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
high-drop-probability number
| Description | The number of octets in unicast packets transmitted from the VOQ to the egress queue that were classified as high drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number forwarded-octets high-drop-probability number | |
| Tree | high-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
low-drop-probability number
| Description | The number of octets in unicast packets transmitted from the VOQ to the egress queue that were classified as low drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number forwarded-octets low-drop-probability number | |
| Tree | low-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
medium-drop-probability number
| Description | The number of octets in unicast packets transmitted from the VOQ to the egress queue that were classified as medium drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number forwarded-octets medium-drop-probability number | |
| Tree | medium-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
forwarded-packets
| Description | Enter the forwarded-packets context | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number forwarded-packets | |
| Tree | forwarded-packets | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
high-drop-probability number
| Description | The number of unicast packets transmitted from the VOQ to the egress queue that were classified as high drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number forwarded-packets high-drop-probability number | |
| Tree | high-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
low-drop-probability number
| Description | The number of unicast packets transmitted from the VOQ to the egress queue that were classified as low drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number forwarded-packets low-drop-probability number | |
| Tree | low-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
medium-drop-probability number
| Description | The number of unicast packets transmitted from the VOQ to the egress queue that were classified as medium drop-probability. This reads 0 when the IMM associated with the VOQ is not inserted and it resets to 0 whenever the IMM associated with the VOQ is removed. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number forwarded-packets medium-drop-probability number | |
| Tree | medium-drop-probability | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
queue-depth
| Description | Enter the queue-depth context | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number queue-depth | |
| Tree | queue-depth | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
high-threshold-bytes number
| Description | The operational hardware value of the high threshold in bytes. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number queue-depth high-threshold-bytes number | |
| Tree | high-threshold-bytes | |
| Units | bytes | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
last-high-threshold-time string
| Description | The last time the depth of either VOQ associated with this slot exceeded the high-threshold in a rising direction. | |
| Context | interface name string qos output queue-statistics queue queue-name (reference | keyword) virtual-output-queue slot number queue-depth last-high-threshold-time string | |
| Tree | last-high-threshold-time | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
scheduler
tier level number
level number
node node-number number
node-number number
| Description | An identifier of the scheduler node. Within a scheduler tier, higher-numbered nodes are served before lower-numbererd nodes. | |
| Context | interface name string qos output scheduler tier level number node node-number number | |
| Range | 0 to 11 | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
strict-priority boolean
| Description | A true value configures the node for strict priority scheduling, whether or not a weight is also configured. When set to false the node is serviced using DWRR, even if the node does not have a configured weight; in this case the default weight value of 1 is used. | |
| Context | interface name string qos output scheduler tier level number node node-number number strict-priority boolean | |
| Tree | strict-priority | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
weight number
sflow
admin-state keyword
| Description | Administratively enable or disable sFlow on this interface | |
| Context | interface name string sflow admin-state keyword | |
| Tree | admin-state | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
statistics
| Description | Enter the statistics context | |
| Context | interface name string statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms |
carrier-transitions number
| Description | Number of times the interface state has transitioned from down to up. This is reset to zero when the device is started or reset or the counters are cleared. | |
| Context | interface name string statistics carrier-transitions number | |
| Tree | carrier-transitions | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-broadcast-packets number
| Description | Corresponds to ifHCInBroadcastPkts from the IF-MIB | |
| Context | interface name string statistics in-broadcast-packets number | |
| Tree | in-broadcast-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-discarded-packets number
| Description | Corresponds to ifInDiscards from the IFMIB. This counts the number of IP packets discarded due to VLAN mismatch, unknown dest MAC or drop by system-filter drop action. On 7250 IXR/IXRe systems this counter is not expected to increment above zero. | |
| Context | interface name string statistics in-discarded-packets number | |
| Tree | in-discarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-error-packets number
| Description | Corresponds to ifInErrors from the IF-MIB | |
| Context | interface name string statistics in-error-packets number | |
| Tree | in-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-fcs-error-packets number
| Description | Ingress FCS errors | |
| Context | interface name string statistics in-fcs-error-packets number | |
| Tree | in-fcs-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-multicast-packets number
| Description | Corresponds to ifHCInMulticastPkts from the IF-MIB | |
| Context | interface name string statistics in-multicast-packets number | |
| Tree | in-multicast-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-octets number
| Description | Corresponds to ifHCInOctets from the IFMIB | |
| Context | interface name string statistics in-octets number | |
| Tree | in-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-packets number
| Description | Sum of all received packets, independent of protocol and forwarding type and before discards and errors | |
| Context | interface name string statistics in-packets number | |
| Tree | in-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-unicast-packets number
| Description | Corresponds to ifHCInUcastPkts from the IF-MIB | |
| Context | interface name string statistics in-unicast-packets number | |
| Tree | in-unicast-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-clear string
| Description | Timestamp of the last time the interface counters were cleared | |
| Context | interface name string statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-broadcast-packets number
| Description | Corresponds to ifHCOutBroadcastPkts from the IF-MIB | |
| Context | interface name string statistics out-broadcast-packets number | |
| Tree | out-broadcast-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-discarded-packets number
| Description | Corresponds to ifOutDiscards from the IF-MIB. On 7250 IXR-6/10 systems this counts packets dropped by an egress IP ACL of any of the port's subinterfaces. | |
| Context | interface name string statistics out-discarded-packets number | |
| Tree | out-discarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-error-packets number
| Description | Corresponds to ifOutErrors from the IF-MIB | |
| Context | interface name string statistics out-error-packets number | |
| Tree | out-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-mirror-octets number
| Description | This counts the number of outgoing mirrored octets | |
| Context | interface name string statistics out-mirror-octets number | |
| Tree | out-mirror-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L |
out-mirror-packets number
| Description | This counts the number of outgoing mirrored packets | |
| Context | interface name string statistics out-mirror-packets number | |
| Tree | out-mirror-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L |
out-multicast-packets number
| Description | Corresponds to ifHCOutMulticastPkts from the IF-MIB | |
| Context | interface name string statistics out-multicast-packets number | |
| Tree | out-multicast-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-octets number
| Description | Corresponds to ifHCOutOctetsfrom the IF-MIB | |
| Context | interface name string statistics out-octets number | |
| Tree | out-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-packets number
| Description | Sum of all transmitted packets, independent of protocol and forwarding type and before discards and errors | |
| Context | interface name string statistics out-packets number | |
| Tree | out-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-unicast-packets number
| Description | Corresponds to ifHCOutUcastPktsfrom the IF-MIB | |
| Context | interface name string statistics out-unicast-packets number | |
| Tree | out-unicast-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
subinterface index number
| Description | The list of subinterfaces (logical interfaces) associated with a physical interface | |
| Context | interface name string subinterface index number | |
| Tree | subinterface | |
| Configurable | True | |
| Platforms | Supported on all platforms | |
| Max. Elements | 4095 |
index number
| Description | The index of the subinterface, or logical interface number | |
| Context | interface name string subinterface index number | |
| Range | 0 to 9999 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
acl
input
ipv4-filter reference
| Description | IPv4 ACL filter(s) to be applied on this subinterface On 7220 and 7250 IXR platforms only a single IPv4 filter is supported. | |
| Context | interface name string subinterface index number acl input ipv4-filter reference | |
| Tree | ipv4-filter | |
| Reference | acl ipv4-filter name string | |
| Configurable | True | |
| Platforms | Supported on all platforms | |
| Max. Elements | 2 |
ipv6-filter reference
| Description | IPv6 ACL filter(s) to be applied on this subinterface On 7220 and 7250 IXR platforms only a single IPv6 filter is supported. | |
| Context | interface name string subinterface index number acl input ipv6-filter reference | |
| Tree | ipv6-filter | |
| Reference | acl ipv6-filter name string | |
| Configurable | True | |
| Platforms | Supported on all platforms | |
| Max. Elements | 2 |
mac-filter reference
| Description | MAC ACL filter to be applied on this subinterface On 7220 IXR platforms MAC ACL is mutually exclusive with IP ACLs. | |
| Context | interface name string subinterface index number acl input mac-filter reference | |
| Tree | mac-filter | |
| Reference | acl mac-filter name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 | |
| Max. Elements | 1 |
output
ipv4-filter reference
| Description | IPv4 ACL filter(s) to be applied on this subinterface On 7220 and 7250 IXR platforms only a single IPv4 filter is supported. | |
| Context | interface name string subinterface index number acl output ipv4-filter reference | |
| Tree | ipv4-filter | |
| Reference | acl ipv4-filter name string | |
| Configurable | True | |
| Platforms | Supported on all platforms | |
| Max. Elements | 1 |
ipv6-filter reference
| Description | IPv6 ACL filter(s) to be applied on this subinterface On 7220 and 7250 IXR platforms only a single IPv6 filter is supported. | |
| Context | interface name string subinterface index number acl output ipv6-filter reference | |
| Tree | ipv6-filter | |
| Reference | acl ipv6-filter name string | |
| Configurable | True | |
| Platforms | Supported on all platforms | |
| Max. Elements | 1 |
mac-filter reference
| Description | MAC ACL filter to be applied on this subinterface On 7220 IXR platforms MAC ACL is mutually exclusive with IP ACLs. | |
| Context | interface name string subinterface index number acl output mac-filter reference | |
| Tree | mac-filter | |
| Reference | acl mac-filter name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 | |
| Max. Elements | 1 |
admin-state keyword
| Description | The configured, desired state of the subinterface | |
| Context | interface name string subinterface index number admin-state keyword | |
| Tree | admin-state | |
| Default | enable | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
anycast-gw
| Description | Enable the anycast-gw context | |
| Context | interface name string subinterface index number anycast-gw | |
| Tree | anycast-gw | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
anycast-gw-mac string
| Description | The MAC address of associated to the anycast-gw IP address. If the anycast-gw MAC address is not configured, it will be auto-derived from the virtual-router-id value as per draft-ietf-bess-evpn-inter-subnet-forwarding following the format 00:00:5E:00:01:VRID. | |
| Context | interface name string subinterface index number anycast-gw anycast-gw-mac string | |
| Tree | anycast-gw-mac | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
anycast-gw-mac-origin keyword
| Description | Origin of the active anycast-gateway MAC address. If not configured, the anycast-gateway-mac will be auto-derived out of 00:00:5E:00:01:VRID, where VRID is the Virtual Router Identifier of the subinterface anycast-gw. | |
| Context | interface name string subinterface index number anycast-gw anycast-gw-mac-origin keyword | |
| Tree | anycast-gw-mac-origin | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
virtual-router-id number
| Description | The Virtual Router Identifier (VRID) value used to auto-derive the anycast-gw-mac in the format 00:00:5E:00:01:VRID. | |
| Context | interface name string subinterface index number anycast-gw virtual-router-id number | |
| Tree | virtual-router-id | |
| Range | 1 to 255 | |
| Default | 1 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
bridge-table
| Description | Enable the Bridge Table on the subinterface and configure associated parameters | |
| Context | interface name string subinterface index number bridge-table | |
| Tree | bridge-table | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
discard-unknown-src-mac boolean
| Description | Discard frames with unknown source mac addresses. The source mac address of the discarded frame is never learned when this command is enabled. | |
| Context | interface name string subinterface index number bridge-table discard-unknown-src-mac boolean | |
| Tree | discard-unknown-src-mac | |
| Default | false | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
mac-duplication
| Description | Enter the mac-duplication context | |
| Context | interface name string subinterface index number bridge-table mac-duplication | |
| Tree | mac-duplication | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
action keyword
| Description | Action to take on the subinterface upon detecting at least one mac addresses as duplicate on the subinterface. In particular: | |
| Context | interface name string subinterface index number bridge-table mac-duplication action keyword | |
| Tree | action | |
| Default | use-net-instance-action | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
duplicate-entries
| Description | Enter the duplicate-entries context | |
| Context | interface name string subinterface index number bridge-table mac-duplication duplicate-entries | |
| Tree | duplicate-entries | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
mac address string
| Description | macs duplicate on the bridging instance | |
| Context | interface name string subinterface index number bridge-table mac-duplication duplicate-entries mac address string | |
| Tree | mac | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
address string
| Description | Enter the address context | |
| Context | interface name string subinterface index number bridge-table mac-duplication duplicate-entries mac address string | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
dup-detect-time string
| Description | The date and time when the mac was declared duplicate | |
| Context | interface name string subinterface index number bridge-table mac-duplication duplicate-entries mac address string dup-detect-time string | |
| Tree | dup-detect-time | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
hold-down-time-remaining (keyword | number)
| Description | remaining hold down time for duplicate mac | |
| Context | interface name string subinterface index number bridge-table mac-duplication duplicate-entries mac address string hold-down-time-remaining (keyword | number) | |
| Tree | hold-down-time-remaining | |
| Units | seconds | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
mac-learning
| Description | Enter the mac-learning context | |
| Context | interface name string subinterface index number bridge-table mac-learning | |
| Tree | mac-learning | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
admin-state keyword
| Description | Configurable state of the learning procedures for dynamic mac addresses. If disabled, the existing macs in the bridge-table will be kept (and refreshed if new frames arrive for them) but no new mac addresses will be learned. Frames with unknown mac addresses are not dropped, unless discard-unknown-src-mac is configured. | |
| Context | interface name string subinterface index number bridge-table mac-learning admin-state keyword | |
| Tree | admin-state | |
| Default | enable | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
aging
| Description | Enter the aging context | |
| Context | interface name string subinterface index number bridge-table mac-learning aging | |
| Tree | aging | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
admin-state keyword
| Description | Configurable state of the aging for the dynamic mac entries in the bridge table. If disabled, dynamically learned mac entries will be programmed in the bridge table until the network instance is disabled. | |
| Context | interface name string subinterface index number bridge-table mac-learning aging admin-state keyword | |
| Tree | admin-state | |
| Default | enable | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
learnt-entries
| Description | Enter the learnt-entries context | |
| Context | interface name string subinterface index number bridge-table mac-learning learnt-entries | |
| Tree | learnt-entries | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
mac address string
| Description | macs learnt on the bridging instance | |
| Context | interface name string subinterface index number bridge-table mac-learning learnt-entries mac address string | |
| Tree | mac | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
address string
| Description | Enter the address context | |
| Context | interface name string subinterface index number bridge-table mac-learning learnt-entries mac address string | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
aging (number | keyword)
| Description | remaining age time for learnt macs | |
| Context | interface name string subinterface index number bridge-table mac-learning learnt-entries mac address string aging (number | keyword) | |
| Tree | aging | |
| Units | seconds | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
last-update string
| Description | The date and time of the last update of this learnt mac | |
| Context | interface name string subinterface index number bridge-table mac-learning learnt-entries mac address string last-update string | |
| Tree | last-update | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
mac-limit
| Description | Bridge Table size and thresholds. | |
| Context | interface name string subinterface index number bridge-table mac-limit | |
| Tree | mac-limit | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
maximum-entries number
| Description | Maximum number of mac addresses allowed in the bridge-table. | |
| Context | interface name string subinterface index number bridge-table mac-limit maximum-entries number | |
| Tree | maximum-entries | |
| Range | 1 to 8192 | |
| Default | 250 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
warning-threshold-pct number
| Description | Percentage of the configured max-number-macs over which a warning is triggered. The warning message is cleared when the percentage drops below the configured percentage minus 5% | |
| Context | interface name string subinterface index number bridge-table mac-limit warning-threshold-pct number | |
| Tree | warning-threshold-pct | |
| Range | 6 to 100 | |
| Default | 95 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
mac-table
| Description | Enter the mac-table context | |
| Context | interface name string subinterface index number bridge-table mac-table | |
| Tree | mac-table | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
mac address string
| Description | macs learnt on the bridging instance | |
| Context | interface name string subinterface index number bridge-table mac-table mac address string | |
| Tree | mac | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
address string
| Description | Enter the address context | |
| Context | interface name string subinterface index number bridge-table mac-table mac address string | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
failed-slots number
| Description | The list of slot IDs corresponding to the linecards that did not successfully program the mac | |
| Context | interface name string subinterface index number bridge-table mac-table mac address string failed-slots number | |
| Tree | failed-slots | |
| Range | 1 to 8 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
last-update string
| Description | The date and time of the last update of this mac | |
| Context | interface name string subinterface index number bridge-table mac-table mac address string last-update string | |
| Tree | last-update | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
not-programmed-reason keyword
| Description | The reason why the mac is not programmed | |
| Context | interface name string subinterface index number bridge-table mac-table mac address string not-programmed-reason keyword | |
| Tree | not-programmed-reason | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
type keyword
| Description | the type of the mac installed in the fib. | |
| Context | interface name string subinterface index number bridge-table mac-table mac address string type keyword | |
| Tree | type | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
statistics
| Description | Enter the statistics context | |
| Context | interface name string subinterface index number bridge-table statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
active-entries number
| Description | The total number of entries that are active on the sub-interface. | |
| Context | interface name string subinterface index number bridge-table statistics active-entries number | |
| Tree | active-entries | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
failed-entries number
| Description | The total number of macs, which have not been programmed on atleast one slot | |
| Context | interface name string subinterface index number bridge-table statistics failed-entries number | |
| Tree | failed-entries | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
mac-type type keyword
| Description | the type of the mac on the sub-interface. | |
| Context | interface name string subinterface index number bridge-table statistics mac-type type keyword | |
| Tree | mac-type | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
type keyword
| Description | Enter the type context | |
| Context | interface name string subinterface index number bridge-table statistics mac-type type keyword | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
active-entries number
| Description | The total number of entries of this type on the sub-interface | |
| Context | interface name string subinterface index number bridge-table statistics mac-type type keyword active-entries number | |
| Tree | active-entries | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
failed-entries number
| Description | The total number of macs of this type, which have not been programmed on atleast one slot | |
| Context | interface name string subinterface index number bridge-table statistics mac-type type keyword failed-entries number | |
| Tree | failed-entries | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
total-entries number
| Description | The total number of macs of this type , active and inactive, on the sub-interface. | |
| Context | interface name string subinterface index number bridge-table statistics mac-type type keyword total-entries number | |
| Tree | total-entries | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
total-entries number
| Description | The total number of macs, active and inactive, on the sub-interface. | |
| Context | interface name string subinterface index number bridge-table statistics total-entries number | |
| Tree | total-entries | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
description string
| Description | A user-configured description of the interface | |
| Context | interface name string subinterface index number description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
ethernet-segment-association
| Description | ethernet-segment association information. | |
| Context | interface name string subinterface index number ethernet-segment-association | |
| Tree | ethernet-segment-association | |
| Configurable | False | |
| Platforms | Supported on all platforms |
designated-forwarder boolean
| Description | The value of this leaf indicates if the interface is the designated forwarder for the ethernet-segment on the network-instance. | |
| Context | interface name string subinterface index number ethernet-segment-association designated-forwarder boolean | |
| Tree | designated-forwarder | |
| Default | false | |
| Configurable | False | |
| Platforms | Supported on all platforms |
es-managed boolean
| Description | The value of this leaf indicates if the interface is managed by the ethernet-segment on the network-instance. | |
| Context | interface name string subinterface index number ethernet-segment-association es-managed boolean | |
| Tree | es-managed | |
| Default | false | |
| Configurable | False | |
| Platforms | Supported on all platforms |
ethernet-segment string
| Description | The value of this leaf indicates the ethernet-segment, the sub-interface is associated to. | |
| Context | interface name string subinterface index number ethernet-segment-association ethernet-segment string | |
| Tree | ethernet-segment | |
| String Length | 1 to 255 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
ifindex number
ip-mtu number
| Description | IP MTU of the subinterface in bytes. Includes the IP header but excludes Ethernet encapsulation. IP MTU specifies the maximum sized IPv4 or IPv6 packet that can be transmitted on the subinterface. If an IPv4 or IPv6 packet exceeds this size it is dropped and this may result in the generation of an ICMP error message back to the source. The default IP MTU for a subinterface is taken from /system/mtu/default-ip-mtu. For the mgmt0 and mgmt0-standby subinterfaces the default is the associated interface MTU minus the Ethernet encapsulation overhead. The IP MTU is not configurable for subinterfaces of loopback interfaces. The 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D3, 7220 IXR-H2, and 7220 IXR-H3 systems support a maximum IP MTU of 9398 bytes. Each 7250 IXR IMM supports a maximum of 4 different IP MTU values. 7220 IXR systems do not have any limit on the maximum number of different IP MTU values. | |
| Context | interface name string subinterface index number ip-mtu number | |
| Tree | ip-mtu | |
| Range | 1280 to 9486 | |
| Units | bytes | |
| Configurable | True | |
| Platforms | Supported on all platforms |
ipv4
address ip-prefix string
ip-prefix string
| Description | The IPv4 address and prefix length in CIDR notation Subnets on the same subinterface are allowed to overlap as long as the host bits are different. When a locally originated unicast packet is destined to a host covered by multiple subnets associated with a subinterface, the source address is chosen to be the numerically lowest IP address among all these subnets. For example, if the addresses 172.16.1.1/12, 172.16.1.2/12, and 172.16.1.3/12 are configured on the same interface, 172.16.1.1 would be used as a local address when you issue a ping 172.16.1.5 command | |
| Context | interface name string subinterface index number ipv4 address ip-prefix string | |
| Configurable | True | |
| Platforms | Supported on all platforms |
anycast-gw boolean
| Description | This designates the associated IPv4 address as an anycast-gateway IPv4 address of the subinterface. When this parameter is set to true: | |
| Context | interface name string subinterface index number ipv4 address ip-prefix string anycast-gw boolean | |
| Tree | anycast-gw | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
origin keyword
primary
| Description | One of the IPv4 prefixes assigned to the subinterface can be explicitly configured as primary by setting this leaf to true. This designates the associated IPv4 address as a primary IPv4 address of the subinterface. By default, the numerically lowest value IPv4 address is selected as the primary address. The primary address is used as the source address for locally originated broadcast and multicast packets sent out the subinterface. | |
| Context | interface name string subinterface index number ipv4 address ip-prefix string primary | |
| Tree | primary | |
| Configurable | True | |
| Platforms | Supported on all platforms |
status keyword
admin-state keyword
| Description | Enable/disable IPv4 on the subinterface When set to enable, and even before an IPv4 address is configured, the subinterface starts to accept incoming packets with dest-ip 255.255.255.255, which is necessary to support dhcp-client functionality. | |
| Context | interface name string subinterface index number ipv4 admin-state keyword | |
| Tree | admin-state | |
| Default | disable | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
allow-directed-broadcast boolean
| Description | When this is set to true the software is allowed to re-broadcast targeted broadcast IPv4 packets on this subinterface Detailed handling of subnet broadcast is as follows: If a targeted broadcast packet is received on subinterface X that has the matching subnet then it is delivered to the CPM and CPM will reply to an ICMP echo. If a targeted broadcast packet is received on subinterface X but the matching subnet is associated with subinterface Y, and subinterface Y is configured with allow-directed-broadcasts=false then it is delivered to the CPM and CPM replies to an ICMP echo per above, but it does not re-broadcast the packet on subinterface Y. If a targeted broadcast packet is received on subinterface X but the matching subnet is associated with subinterface Y, and subinterface Y is configured with allow-directed-broadcasts=true then it is delivered to the CPM and CPM replies to an ICMP echo per above, and CPM also re-broadcasts the packet on subinterface Y. | |
| Context | interface name string subinterface index number ipv4 allow-directed-broadcast boolean | |
| Tree | allow-directed-broadcast | |
| Default | false | |
| Configurable | True | |
| Platforms | Supported on all platforms |
arp
debug keyword
duplicate-address-detection boolean
| Description | If set to true IPv4 Address Conflict Detection per RFC 5227 is performed on the IPv4 address assigned to the subinterface | |
| Context | interface name string subinterface index number ipv4 arp duplicate-address-detection boolean | |
| Tree | duplicate-address-detection | |
| Default | true | |
| Configurable | True | |
| Platforms | Supported on all platforms |
evpn
advertise route-type keyword
| Description | Enter the advertise list instance | |
| Context | interface name string subinterface index number ipv4 arp evpn advertise route-type keyword | |
| Tree | advertise | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
route-type keyword
| Description | Controls what type of ARP or ND entries to advertise. | |
| Context | interface name string subinterface index number ipv4 arp evpn advertise route-type keyword | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
host-route
| Description | Configure which types of ARP or ND entries will be populated in the route-table. | |
| Context | interface name string subinterface index number ipv4 arp host-route | |
| Tree | host-route | |
| Configurable | True | |
| Platforms | Supported on all platforms |
populate route-type keyword
| Description | Enter the populate list instance | |
| Context | interface name string subinterface index number ipv4 arp host-route populate route-type keyword | |
| Tree | populate | |
| Configurable | True | |
| Platforms | Supported on all platforms |
route-type keyword
| Description | Controls what type of ARP or ND entries generate a host route. | |
| Context | interface name string subinterface index number ipv4 arp host-route populate route-type keyword | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
datapath-programming boolean
| Description | When set to true, the host route is programmed in the datapath | |
| Context | interface name string subinterface index number ipv4 arp host-route populate route-type keyword datapath-programming boolean | |
| Tree | datapath-programming | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
internal-tags
| Description | Configuration and state of internal tags | |
| Context | interface name string subinterface index number ipv4 arp host-route populate route-type keyword internal-tags | |
| Tree | internal-tags | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
tag-set reference
| Description | Reference to a tag-set defined under routing-policy | |
| Context | interface name string subinterface index number ipv4 arp host-route populate route-type keyword internal-tags tag-set reference | |
| Tree | tag-set | |
| Reference | routing-policy tag-set name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
learn-unsolicited boolean
| Description | If set to true an ARP entry should be learned from any received ARP packets. | |
| Context | interface name string subinterface index number ipv4 arp learn-unsolicited boolean | |
| Tree | learn-unsolicited | |
| Default | false | |
| Configurable | True | |
| Platforms | Supported on all platforms |
neighbor ipv4-address string
| Description | List of static and dynamic ARP cache entries that map an IPv4 address to a MAC address To configure a static ARP entry a value must be written into this leaf and the link-layer-address leaf. | |
| Context | interface name string subinterface index number ipv4 arp neighbor ipv4-address string | |
| Tree | neighbor | |
| Configurable | True | |
| Platforms | Supported on all platforms |
ipv4-address string
| Description | IPv4 address resolved by the ARP entry To configure a static neighbor entry a value must be written into this leaf and the link-layer-address leaf. | |
| Context | interface name string subinterface index number ipv4 arp neighbor ipv4-address string | |
| Configurable | True | |
| Platforms | Supported on all platforms |
datapath-programming
| Description | Container for state related to the datapath programming of the ARP or neighbor entry | |
| Context | interface name string subinterface index number ipv4 arp neighbor ipv4-address string datapath-programming | |
| Tree | datapath-programming | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-failed-complexes string
| Description | List of forwarding complexes that reported a failure for the last operation. They appear in the format (slot-number,complex-number). | |
| Context | interface name string subinterface index number ipv4 arp neighbor ipv4-address string datapath-programming last-failed-complexes string | |
| Tree | last-failed-complexes | |
| Configurable | False | |
| Platforms | Supported on all platforms |
status keyword
| Description | The status of the ARP or neighbor entry with respect to datapath programming | |
| Context | interface name string subinterface index number ipv4 arp neighbor ipv4-address string datapath-programming status keyword | |
| Tree | status | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
expiration-time string
| Description | The date and time when the dynamic ARP entry is set to expire | |
| Context | interface name string subinterface index number ipv4 arp neighbor ipv4-address string expiration-time string | |
| Tree | expiration-time | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
link-layer-address string
| Description | The resolving MAC address of the ARP entry To configure a static ARP entry a value must be written into this leaf and the ipv4-address leaf. | |
| Context | interface name string subinterface index number ipv4 arp neighbor ipv4-address string link-layer-address string | |
| Tree | link-layer-address | |
| Configurable | True | |
| Platforms | Supported on all platforms |
origin keyword
| Description | The origin of the ARP entry | |
| Context | interface name string subinterface index number ipv4 arp neighbor ipv4-address string origin keyword | |
| Tree | origin | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
proxy-arp boolean
| Description | When set to true, the router replies with its own MAC to ARP Request destined to any host. | |
| Context | interface name string subinterface index number ipv4 arp proxy-arp boolean | |
| Tree | proxy-arp | |
| Default | false | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
timeout number
| Description | Duration of time that dynamic ARP entries remain in the ARP cache before they expire A change to this value does not affect existing entries until they are refreshed. | |
| Context | interface name string subinterface index number ipv4 arp timeout number | |
| Tree | timeout | |
| Range | 60 to 65535 | |
| Default | 14400 | |
| Units | seconds | |
| Configurable | True | |
| Platforms | Supported on all platforms |
virtual-ipv4-discovery
| Description | Enable Virtual IPv4 discovery on the subinterface and configure associated parameters When enabled, the system will attempt to discover the configured virtual IPv4 addresses on the listed bridged subinterfaces. | |
| Context | interface name string subinterface index number ipv4 arp virtual-ipv4-discovery | |
| Tree | virtual-ipv4-discovery | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
address ipv4-address string
| Description | The list of virtual IPv4 addresses to be discovered on the subinterface. | |
| Context | interface name string subinterface index number ipv4 arp virtual-ipv4-discovery address ipv4-address string | |
| Tree | address | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e | |
| Max. Elements | 640 |
ipv4-address string
| Description | The virtual IPv4 address. | |
| Context | interface name string subinterface index number ipv4 arp virtual-ipv4-discovery address ipv4-address string | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
allowed-macs string
| Description | List of allowed mac addresses for a discovered virtual IP address. | |
| Context | interface name string subinterface index number ipv4 arp virtual-ipv4-discovery address ipv4-address string allowed-macs string | |
| Tree | allowed-macs | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e | |
| Max. Elements | 10 |
probe-bridged-subinterfaces string
| Description | Configure the list of bridged sub-interfaces on the associated MAC-VRF to which the ARP probes are sent. | |
| Context | interface name string subinterface index number ipv4 arp virtual-ipv4-discovery address ipv4-address string probe-bridged-subinterfaces string | |
| Tree | probe-bridged-subinterfaces | |
| String Length | 5 to 25 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e | |
| Max. Elements | 10 |
probe-interval number
| Description | Configure the ARP probe interval at which the system sends an ARP request for the virtual IPv4 address. The default value of zero determines that the system sends an ARP Request for the virtual IPv4 only when the address is configured. The creation of the ARP entry for the virtual IPv4 address will in this case rely on the server sending a Gratuitous ARP for the virtual IPv4 address. When the value is set to a non-zero interval, the system sends a periodic ARP Request at the configured interval and irrespective of the ARP entry being already created. | |
| Context | interface name string subinterface index number ipv4 arp virtual-ipv4-discovery address ipv4-address string probe-interval number | |
| Tree | probe-interval | |
| Range | 0 | 5 to 86400 | |
| Default | 0 | |
| Units | seconds | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
statistics
| Description | Statistics for the Virtual IP address | |
| Context | interface name string subinterface index number ipv4 arp virtual-ipv4-discovery address ipv4-address string statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-probe-packets number
| Description | The number of probe packets transmitted for the Virtual IP discovery. | |
| Context | interface name string subinterface index number ipv4 arp virtual-ipv4-discovery address ipv4-address string statistics out-probe-packets number | |
| Tree | out-probe-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
statistics
| Description | Global statistics for Virtual IP discovery | |
| Context | interface name string subinterface index number ipv4 arp virtual-ipv4-discovery statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-total-probe-packets number
| Description | The number of total probe packets transmitted for Virtual discovery. | |
| Context | interface name string subinterface index number ipv4 arp virtual-ipv4-discovery statistics out-total-probe-packets number | |
| Tree | out-total-probe-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
dhcp-client
| Description | Container for options related to DHCP | |
| Context | interface name string subinterface index number ipv4 dhcp-client | |
| Tree | dhcp-client | |
| Configurable | True | |
| Platforms | Supported on all platforms |
trace-options
| Description | Container for tracing DHCPv4 operations on the subinterface | |
| Context | interface name string subinterface index number ipv4 dhcp-client trace-options | |
| Tree | trace-options | |
| Configurable | True | |
| Platforms | Supported on all platforms |
trace keyword
| Description | List of events to trace | |
| Context | interface name string subinterface index number ipv4 dhcp-client trace-options trace keyword | |
| Tree | trace | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
dhcp-relay
| Description | Container for options related to DHCPv4 relay | |
| Context | interface name string subinterface index number ipv4 dhcp-relay | |
| Tree | dhcp-relay | |
| Configurable | True | |
| Platforms | Supported on all platforms |
admin-state keyword
| Description | The configurable state of the dhcp relay agent | |
| Context | interface name string subinterface index number ipv4 dhcp-relay admin-state keyword | |
| Tree | admin-state | |
| Default | enable | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
dns-resolution
| Description | Enter the dns-resolution context | |
| Context | interface name string subinterface index number ipv4 dhcp-relay dns-resolution | |
| Tree | dns-resolution | |
| Configurable | False | |
| Platforms | Supported on all platforms |
server domain string
| Description | Reports the resolved IP address for server entries using domain names | |
| Context | interface name string subinterface index number ipv4 dhcp-relay dns-resolution server domain string | |
| Tree | server | |
| Configurable | False | |
| Platforms | Supported on all platforms |
domain string
| Description | The server domain name | |
| Context | interface name string subinterface index number ipv4 dhcp-relay dns-resolution server domain string | |
| String Length | 1 to 253 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-update string
| Description | The date and time of the last update of the server IP address | |
| Context | interface name string subinterface index number ipv4 dhcp-relay dns-resolution server domain string last-update string | |
| Tree | last-update | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
resolved-ip-address (ipv4-address | ipv6-address)
| Description | The resolved IP address of the server domain name. An entry of 0.0.0.0 indicates the server IP cannot be resolved. | |
| Context | interface name string subinterface index number ipv4 dhcp-relay dns-resolution server domain string resolved-ip-address (ipv4-address | ipv6-address) | |
| Tree | resolved-ip-address | |
| Configurable | False | |
| Platforms | Supported on all platforms |
gi-address string
| Description | IPv4 address to be used as giaddr of the relayed packets towards DHCPv4 servers. This address can be any IPv4 address configured within the network-instance towards the DHCPv4 server | |
| Context | interface name string subinterface index number ipv4 dhcp-relay gi-address string | |
| Tree | gi-address | |
| Configurable | True | |
| Platforms | Supported on all platforms |
network-instance reference
| Description | network instance to relay dhcp packets to | |
| Context | interface name string subinterface index number ipv4 dhcp-relay network-instance reference | |
| Tree | network-instance | |
| Reference | network-instance name string | |
| Configurable | True | |
| Platforms | Supported on all platforms |
oper-down-reason keyword
| Description | The reason causing the dhcp relay agent to go into operational down state | |
| Context | interface name string subinterface index number ipv4 dhcp-relay oper-down-reason keyword | |
| Tree | oper-down-reason | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
oper-state keyword
| Description | The operational state of the dhcp relay agent | |
| Context | interface name string subinterface index number ipv4 dhcp-relay oper-state keyword | |
| Tree | oper-state | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
option keyword
| Description | List of option82 suboptions to insert into relayed packet towards DHCPv4 server | |
| Context | interface name string subinterface index number ipv4 dhcp-relay option keyword | |
| Tree | option | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
server (ipv4-address | domain-name)
| Description | List of the DHCPv4 servers that the DHCPv4 relay function will relay DHCPv4 packets to/from | |
| Context | interface name string subinterface index number ipv4 dhcp-relay server (ipv4-address | domain-name) | |
| Tree | server | |
| String Length | 1 to 253 | |
| Configurable | True | |
| Platforms | Supported on all platforms | |
| Max. Elements | 8 | |
| Min. Elements | 1 |
statistics
| Description | Enter the statistics context | |
| Context | interface name string subinterface index number ipv4 dhcp-relay statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms |
client-packets-discarded number
| Description | Total discarded dhcp packets from dhcp client(s) towards DHCP server(s) | |
| Context | interface name string subinterface index number ipv4 dhcp-relay statistics client-packets-discarded number | |
| Tree | client-packets-discarded | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
client-packets-received number
| Description | Total received dhcp packets from dhcp client(s) for DHCP Relay | |
| Context | interface name string subinterface index number ipv4 dhcp-relay statistics client-packets-received number | |
| Tree | client-packets-received | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
client-packets-relayed number
| Description | Total relayed dhcp packets from dhcp client(s) towards DHCP server(s) | |
| Context | interface name string subinterface index number ipv4 dhcp-relay statistics client-packets-relayed number | |
| Tree | client-packets-relayed | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
server-packets-discarded number
| Description | Total discarded dhcp packets from DHCP server(s) towards dhcp client(s) | |
| Context | interface name string subinterface index number ipv4 dhcp-relay statistics server-packets-discarded number | |
| Tree | server-packets-discarded | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
server-packets-received number
| Description | Total received dhcp packets from DHCP server(s) for DHCP Relay | |
| Context | interface name string subinterface index number ipv4 dhcp-relay statistics server-packets-received number | |
| Tree | server-packets-received | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
server-packets-relayed number
| Description | Total relayed dhcp packets from DHCP server(s) towards dhcp client(s) | |
| Context | interface name string subinterface index number ipv4 dhcp-relay statistics server-packets-relayed number | |
| Tree | server-packets-relayed | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
trace-options
| Description | Container for tracing DHCPv4 relay operations on the subinterface | |
| Context | interface name string subinterface index number ipv4 dhcp-relay trace-options | |
| Tree | trace-options | |
| Configurable | True | |
| Platforms | Supported on all platforms |
trace keyword
| Description | List of events to trace | |
| Context | interface name string subinterface index number ipv4 dhcp-relay trace-options trace keyword | |
| Tree | trace | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
use-gi-addr-as-src-ip-addr boolean
| Description | When this is set, the configured giaddress will be used as source ip address. | |
| Context | interface name string subinterface index number ipv4 dhcp-relay use-gi-addr-as-src-ip-addr boolean | |
| Tree | use-gi-addr-as-src-ip-addr | |
| Default | false | |
| Configurable | True | |
| Platforms | Supported on all platforms |
dhcp-server
| Description | Enable the dhcp-server context | |
| Context | interface name string subinterface index number ipv4 dhcp-server | |
| Tree | dhcp-server | |
| Configurable | True | |
| Platforms | Supported on all platforms |
admin-state keyword
| Description | Enables/Disables DHCP server function on subinterface | |
| Context | interface name string subinterface index number ipv4 dhcp-server admin-state keyword | |
| Tree | admin-state | |
| Default | disable | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
oper-state keyword
| Description | Details if the dhcp server is operationally available | |
| Context | interface name string subinterface index number ipv4 dhcp-server oper-state keyword | |
| Tree | oper-state | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
statistics
| Description | Container for subinterface statistics, counting IPv4 packets or IPv6 packets or both dependending on the context | |
| Context | interface name string subinterface index number ipv4 statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-discarded-packets number
| Description | The total number of input IPv4 packets or IPv6 packets or both (transit and terminating traffic) that were dropped for any of the following reasons: This also includes IP/MPLS packets dropped by ingress interface ACL drop action or CPM filer drop action. | |
| Context | interface name string subinterface index number ipv4 statistics in-discarded-packets number | |
| Tree | in-discarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-error-packets number
| Description | The total number of input IPv4 packets or IPv6 packets or both discarded due to errors, counting transit and terminating traffic The sum of the following RFC 4293 counters: ipIfStatsInHdrErrors ipIfStatsInNoRoutes ipIfStatsInAddrErrors ipIfStatsInUnknownProtos ipIfStatsInTruncatedPkts | |
| Context | interface name string subinterface index number ipv4 statistics in-error-packets number | |
| Tree | in-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-forwarded-octets number
| Description | The number of octets in input IPv4 packets or IPv6 packets or both received on this subinterface and counted in in-forwarded-packets | |
| Context | interface name string subinterface index number ipv4 statistics in-forwarded-octets number | |
| Tree | in-forwarded-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-forwarded-packets number
| Description | The number of input IPv4 packets or IPv6 packets or both received on this subinterface for which the router was not the final destination and for which the router attempted to find a route to forward them to that final destination. Note that non-terminating IPv4 packets with options and non-terminating IPv6 packets with extension headers are included in this count (and not dropped) as are packets that trigger ICMP/ICMPv6 redirect messages. On 7220 IXR systems this also counts received traffic that is terminating. | |
| Context | interface name string subinterface index number ipv4 statistics in-forwarded-packets number | |
| Tree | in-forwarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-matched-ra-packets number
| Description | The total number of IPv6 packets matched with applied RA-Guard policy | |
| Context | interface name string subinterface index number ipv4 statistics in-matched-ra-packets number | |
| Tree | in-matched-ra-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-octets number
| Description | The total number of octets received in input packets, counting transit and terminating traffic | |
| Context | interface name string subinterface index number ipv4 statistics in-octets number | |
| Tree | in-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-packets number
| Description | The total number of input packets received, counting transit and terminating traffic This equals the sum of: in-error-packets in-discarded-packets (also includes IP/MPLS packets) in-terminated-packets (also includes IP/MPLS packets) in-forwarded-packets | |
| Context | interface name string subinterface index number ipv4 statistics in-packets number | |
| Tree | in-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-terminated-octets number
| Description | The total number of octets in input IPv4 packets or IPv6 packets or both that were received on this subinterface and counted in in-terminated-packets | |
| Context | interface name string subinterface index number ipv4 statistics in-terminated-octets number | |
| Tree | in-terminated-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-terminated-packets number
| Description | The total number of input IPv4 packets or IPv6 packets or both that were received on this subinterface and that have a destination IP address matching a local interface address or an IPv6 multicast address to which the interface belongs. The count includes packets eventually discarded by the CPM. Such discards include: This also includes terminating IP/MPLS packets. | |
| Context | interface name string subinterface index number ipv4 statistics in-terminated-packets number | |
| Tree | in-terminated-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
last-clear string
| Description | Timestamp of the last time the subinterface counters were cleared. | |
| Context | interface name string subinterface index number ipv4 statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-discarded-packets number
| Description | The total number of IPv4 packets or IPv6 packets or both, originating and transit, sent towards this subinterface that were dropped. This also includes IP/MPLS packets dropped by egress interface ACL drop action. | |
| Context | interface name string subinterface index number ipv4 statistics out-discarded-packets number | |
| Tree | out-discarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-error-packets number
| Description | The number of IPv4 packets or IPv6 packets or both, originating and transit, for which this router was successful in finding a path to their final destination through this subinterface but an error prevented their transmission. On 7250 IXR systems this is incremented when the IPv4 packet size exceeds the IP MTU and fragmentation was not allowed or not supported | |
| Context | interface name string subinterface index number ipv4 statistics out-error-packets number | |
| Tree | out-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-forwarded-octets number
| Description | The number of octets in transit IPv4 packets or IPv6 packets or both which the router attempted to route out this subinterface | |
| Context | interface name string subinterface index number ipv4 statistics out-forwarded-octets number | |
| Tree | out-forwarded-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-forwarded-packets number
| Description | The number of transit IPv4 packets or IPv6 packets or both which the router attempted to route out this subinterface | |
| Context | interface name string subinterface index number ipv4 statistics out-forwarded-packets number | |
| Tree | out-forwarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-octets number
| Description | The total number of octets in IPv4 packets or IPv6 packets or both delivered to the lower layers for transmission | |
| Context | interface name string subinterface index number ipv4 statistics out-octets number | |
| Tree | out-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-originated-octets number
| Description | The number of octets in IPv4 packets or IPv6 packets or both which originated on the CPM and which the router attempted to route out this subinterface | |
| Context | interface name string subinterface index number ipv4 statistics out-originated-octets number | |
| Tree | out-originated-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-originated-packets number
| Description | The number of IPv4 packets or IPv6 packets or both which originated on the CPM and which the router attempted to route out this subinterface This includes all originated ICMP/ICMPv6 messages. | |
| Context | interface name string subinterface index number ipv4 statistics out-originated-packets number | |
| Tree | out-originated-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-packets number
| Description | The total number of IPv4 packets or IPv6 packets or both that this router supplied to the lower layers for transmission This includes packets generated locally and those forwarded by this router. If there are no queue drops it is equal to: <out-forwarded-packets> + <out-originated-packets> | |
| Context | interface name string subinterface index number ipv4 statistics out-packets number | |
| Tree | out-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
ipv6
address ip-prefix string
ip-prefix string
| Description | The IPv6 address and prefix-length in CIDR notation Up to 16 global unicast IPv6 addresses can be assigned to each subinterface. Global unicast IPv6 address subnets on the same subinterface are allowed to overlap as long as the host bits are different. When a locally originated unicast packet is destined to a host covered by multiple subnets associated with a subinterface, the source address is chosen to be the numerically lowest IP address among all these subnets. | |
| Context | interface name string subinterface index number ipv6 address ip-prefix string | |
| Configurable | True | |
| Platforms | Supported on all platforms |
anycast-gw boolean
| Description | This designates the associated IPv6 address as an anycast-gateway IPv6 address of the subinterface. When this parameter is set to true: | |
| Context | interface name string subinterface index number ipv6 address ip-prefix string anycast-gw boolean | |
| Tree | anycast-gw | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
origin keyword
primary
| Description | One of the IPv6 prefixes assigned to the subinterface can be explicitly configured as primary by setting this leaf to true. This designates the associated IPv6 address as a primary IPv6 address of the subinterface. By default, the numerically lowest value IPv6 address is selected as the primary address. The primary address is used as the source address for locally originated broadcast and multicast packets sent out the subinterface. | |
| Context | interface name string subinterface index number ipv6 address ip-prefix string primary | |
| Tree | primary | |
| Configurable | True | |
| Platforms | Supported on all platforms |
status keyword
type keyword
| Description | Specifies the explicit type of the IPv6 address being assigned to the subinterface By default, addresses are assumed to be global unicast. Where a link-local address is to be explicitly configured, this leaf should be set to link-local. | |
| Context | interface name string subinterface index number ipv6 address ip-prefix string type keyword | |
| Tree | type | |
| Default | global-unicast | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
admin-state keyword
| Description | Enable/disable IPv6 on the subinterface When set to enable, and even before a global unicast IPv6 address is configured, chassis manager assigns an IPv6 link-local address to the subinterface, which will appear as a read-only entry in the address list. At this stage, the subinterface can receive IPv6 packets with any of the following destinations: | |
| Context | interface name string subinterface index number ipv6 admin-state keyword | |
| Tree | admin-state | |
| Default | disable | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
dhcp-client
| Description | Container for options related to DHCPv6 | |
| Context | interface name string subinterface index number ipv6 dhcp-client | |
| Tree | dhcp-client | |
| Configurable | True | |
| Platforms | Supported on all platforms |
trace-options
| Description | Container for tracing DHCPv6 operations on the subinterface | |
| Context | interface name string subinterface index number ipv6 dhcp-client trace-options | |
| Tree | trace-options | |
| Configurable | True | |
| Platforms | Supported on all platforms |
trace keyword
| Description | List of events to trace | |
| Context | interface name string subinterface index number ipv6 dhcp-client trace-options trace keyword | |
| Tree | trace | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
dhcp-relay
| Description | Container for options related to DHCPv6 relay | |
| Context | interface name string subinterface index number ipv6 dhcp-relay | |
| Tree | dhcp-relay | |
| Configurable | True | |
| Platforms | Supported on all platforms |
admin-state keyword
| Description | The configurable state of the dhcp relay agent | |
| Context | interface name string subinterface index number ipv6 dhcp-relay admin-state keyword | |
| Tree | admin-state | |
| Default | enable | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
dns-resolution
| Description | Enter the dns-resolution context | |
| Context | interface name string subinterface index number ipv6 dhcp-relay dns-resolution | |
| Tree | dns-resolution | |
| Configurable | False | |
| Platforms | Supported on all platforms |
server domain string
| Description | Reports the resolved IP address for server entries using domain names | |
| Context | interface name string subinterface index number ipv6 dhcp-relay dns-resolution server domain string | |
| Tree | server | |
| Configurable | False | |
| Platforms | Supported on all platforms |
domain string
| Description | The server domain name | |
| Context | interface name string subinterface index number ipv6 dhcp-relay dns-resolution server domain string | |
| String Length | 1 to 253 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-update string
| Description | The date and time of the last update of the server IP address | |
| Context | interface name string subinterface index number ipv6 dhcp-relay dns-resolution server domain string last-update string | |
| Tree | last-update | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
resolved-ip-address (ipv4-address | ipv6-address)
| Description | The resolved IP address of the server domain name. An entry of 0.0.0.0 indicates the server IP cannot be resolved. | |
| Context | interface name string subinterface index number ipv6 dhcp-relay dns-resolution server domain string resolved-ip-address (ipv4-address | ipv6-address) | |
| Tree | resolved-ip-address | |
| Configurable | False | |
| Platforms | Supported on all platforms |
network-instance reference
| Description | network instance to relay dhcp packets to | |
| Context | interface name string subinterface index number ipv6 dhcp-relay network-instance reference | |
| Tree | network-instance | |
| Reference | network-instance name string | |
| Configurable | True | |
| Platforms | Supported on all platforms |
oper-down-reason keyword
| Description | The reason causing the dhcp relay agent to go into operational down state | |
| Context | interface name string subinterface index number ipv6 dhcp-relay oper-down-reason keyword | |
| Tree | oper-down-reason | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
oper-state keyword
| Description | The operational state of the dhcp relay agent | |
| Context | interface name string subinterface index number ipv6 dhcp-relay oper-state keyword | |
| Tree | oper-state | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
option keyword
| Description | List of options to insert into relayed packet towards DHCPv6 server | |
| Context | interface name string subinterface index number ipv6 dhcp-relay option keyword | |
| Tree | option | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
server (ipv6-address | domain-name)
| Description | List of the DHCPv6 servers that the DHCPv6 relay function will relay DHCPv6 packets to/from | |
| Context | interface name string subinterface index number ipv6 dhcp-relay server (ipv6-address | domain-name) | |
| Tree | server | |
| String Length | 1 to 253 | |
| Configurable | True | |
| Platforms | Supported on all platforms | |
| Max. Elements | 8 | |
| Min. Elements | 1 |
source-address string
| Description | Source IPv6 address of the relayed packets towards DHCPv6 servers this address can be any IPv6 address configured within the network-instance towards the DHCPv6 server | |
| Context | interface name string subinterface index number ipv6 dhcp-relay source-address string | |
| Tree | source-address | |
| Configurable | True | |
| Platforms | Supported on all platforms |
statistics
| Description | Enter the statistics context | |
| Context | interface name string subinterface index number ipv6 dhcp-relay statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms |
client-packets-discarded number
| Description | Total discarded dhcp packets from dhcp client(s) towards DHCP server(s) | |
| Context | interface name string subinterface index number ipv6 dhcp-relay statistics client-packets-discarded number | |
| Tree | client-packets-discarded | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
client-packets-received number
| Description | Total received dhcp packets from dhcp client(s) for DHCP Relay | |
| Context | interface name string subinterface index number ipv6 dhcp-relay statistics client-packets-received number | |
| Tree | client-packets-received | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
client-packets-relayed number
| Description | Total relayed dhcp packets from dhcp client(s) towards DHCP server(s) | |
| Context | interface name string subinterface index number ipv6 dhcp-relay statistics client-packets-relayed number | |
| Tree | client-packets-relayed | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
server-packets-discarded number
| Description | Total discarded dhcp packets from DHCP server(s) towards dhcp client(s) | |
| Context | interface name string subinterface index number ipv6 dhcp-relay statistics server-packets-discarded number | |
| Tree | server-packets-discarded | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
server-packets-received number
| Description | Total received dhcp packets from DHCP server(s) for DHCP Relay | |
| Context | interface name string subinterface index number ipv6 dhcp-relay statistics server-packets-received number | |
| Tree | server-packets-received | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
server-packets-relayed number
| Description | Total relayed dhcp packets from DHCP server(s) towards dhcp client(s) | |
| Context | interface name string subinterface index number ipv6 dhcp-relay statistics server-packets-relayed number | |
| Tree | server-packets-relayed | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
trace-options
| Description | Container for tracing DHCPv6 relay operations on the subinterface | |
| Context | interface name string subinterface index number ipv6 dhcp-relay trace-options | |
| Tree | trace-options | |
| Configurable | True | |
| Platforms | Supported on all platforms |
trace keyword
| Description | List of events to trace | |
| Context | interface name string subinterface index number ipv6 dhcp-relay trace-options trace keyword | |
| Tree | trace | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
dhcpv6-server
| Description | Enable the dhcpv6-server context | |
| Context | interface name string subinterface index number ipv6 dhcpv6-server | |
| Tree | dhcpv6-server | |
| Configurable | True | |
| Platforms | Supported on all platforms |
admin-state keyword
| Description | Enables/Disables DHCPv6 server function on subinterface | |
| Context | interface name string subinterface index number ipv6 dhcpv6-server admin-state keyword | |
| Tree | admin-state | |
| Default | disable | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
oper-state keyword
| Description | Details if the dhcp server is operationally available | |
| Context | interface name string subinterface index number ipv6 dhcpv6-server oper-state keyword | |
| Tree | oper-state | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
neighbor-discovery
| Description | Container for the IPv6 Neighbor Discovery protocol | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery | |
| Tree | neighbor-discovery | |
| Configurable | True | |
| Platforms | Supported on all platforms |
debug keyword
| Description | List of events to debug | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery debug keyword | |
| Tree | debug | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
duplicate-address-detection boolean
| Description | Enables Duplicate Addres Detection on all tentative addresses This applies to link-local and global unicast addresses. Only one transmission is done; there are no retransmissions. Must be true on an IPv6 subinterface that has dhcp-client enabled. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery duplicate-address-detection boolean | |
| Tree | duplicate-address-detection | |
| Default | true | |
| Configurable | True | |
| Platforms | Supported on all platforms |
evpn
| Description | Configure which types of ARP or ND entries will be advertised in EVPN MAC/IP routes. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery evpn | |
| Tree | evpn | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
advertise route-type keyword
| Description | Enter the advertise list instance | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery evpn advertise route-type keyword | |
| Tree | advertise | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
route-type keyword
| Description | Controls what type of ARP or ND entries to advertise. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery evpn advertise route-type keyword | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
host-route
| Description | Configure which types of ARP or ND entries will be populated in the route-table. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery host-route | |
| Tree | host-route | |
| Configurable | True | |
| Platforms | Supported on all platforms |
populate route-type keyword
| Description | Enter the populate list instance | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery host-route populate route-type keyword | |
| Tree | populate | |
| Configurable | True | |
| Platforms | Supported on all platforms |
route-type keyword
| Description | Controls what type of ARP or ND entries generate a host route. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery host-route populate route-type keyword | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
datapath-programming boolean
| Description | When set to true, the host route is programmed in the datapath | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery host-route populate route-type keyword datapath-programming boolean | |
| Tree | datapath-programming | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
internal-tags
| Description | Configuration and state of internal tags | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery host-route populate route-type keyword internal-tags | |
| Tree | internal-tags | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
tag-set reference
| Description | Reference to a tag-set defined under routing-policy | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery host-route populate route-type keyword internal-tags tag-set reference | |
| Tree | tag-set | |
| Reference | routing-policy tag-set name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
learn-unsolicited keyword
| Description | Sets if neighbors should be learned from unsolicited neighbor advertisements for global or link local addresses or both. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery learn-unsolicited keyword | |
| Tree | learn-unsolicited | |
| Default | none | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
limit
| Description | Container for the configuration of Neighbor-Discovery limit | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery limit | |
| Tree | limit | |
| Configurable | True | |
| Platforms | Supported on all platforms |
log-only boolean
| Description | Generate only a log message when limit is reached When set to true, neighbor entries are still being learned after exceeding the max-entries limit. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery limit log-only boolean | |
| Tree | log-only | |
| Default | false | |
| Configurable | True | |
| Platforms | Supported on all platforms |
max-entries number
| Description | The maximum number of neighbor entries allowed on the subinterface If not configured, the amount of neighbor entries on the subinterface is only limited by the total amount of entries supported by the router. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery limit max-entries number | |
| Tree | max-entries | |
| Configurable | True | |
| Platforms | Supported on all platforms |
warning-threshold-pct number
| Description | Threshold percentage of the configured maximum number of entries When exceeded, an event is triggered. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery limit warning-threshold-pct number | |
| Tree | warning-threshold-pct | |
| Range | 1 to 100 | |
| Default | 90 | |
| Units | percent | |
| Configurable | True | |
| Platforms | Supported on all platforms |
neighbor ipv6-address string
| Description | List of static and dynamic ND cache entries that map an IPv6 address to a MAC address | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery neighbor ipv6-address string | |
| Tree | neighbor | |
| Configurable | True | |
| Platforms | Supported on all platforms |
ipv6-address string
| Description | IPv6 address resolved by the ND cache entry To configure a static neighbor entry a value must be written into this leaf and the link-layer-address leaf. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery neighbor ipv6-address string | |
| Configurable | True | |
| Platforms | Supported on all platforms |
current-state keyword
| Description | The Neighbor Unreachability Detection state | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery neighbor ipv6-address string current-state keyword | |
| Tree | current-state | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
datapath-programming
| Description | Container for state related to the datapath programming of the ARP or neighbor entry | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery neighbor ipv6-address string datapath-programming | |
| Tree | datapath-programming | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-failed-complexes string
| Description | List of forwarding complexes that reported a failure for the last operation. They appear in the format (slot-number,complex-number). | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery neighbor ipv6-address string datapath-programming last-failed-complexes string | |
| Tree | last-failed-complexes | |
| Configurable | False | |
| Platforms | Supported on all platforms |
status keyword
| Description | The status of the ARP or neighbor entry with respect to datapath programming | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery neighbor ipv6-address string datapath-programming status keyword | |
| Tree | status | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
is-router boolean
| Description | Indicates that the neighbor node claims to be a router (R bit in the Neighbor Advertisement message) | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery neighbor ipv6-address string is-router boolean | |
| Tree | is-router | |
| Configurable | False | |
| Platforms | Supported on all platforms |
link-layer-address string
| Description | The resolving MAC address of the ND cache entry To configure a static neighbor entry a value must be written into this leaf and the ipv6-address leaf. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery neighbor ipv6-address string link-layer-address string | |
| Tree | link-layer-address | |
| Configurable | True | |
| Platforms | Supported on all platforms |
next-state-time string
| Description | The date and time when the neighbor state is expected to transition to the next state | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery neighbor ipv6-address string next-state-time string | |
| Tree | next-state-time | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
origin keyword
| Description | The origin of the neighbor cache entry. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery neighbor ipv6-address string origin keyword | |
| Tree | origin | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
proxy-nd boolean
| Description | When set to true, the router replies with its own MAC to Neighbor Solicitations destined to any host. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery proxy-nd boolean | |
| Tree | proxy-nd | |
| Default | false | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
reachable-time number
| Description | The period of time that a dynamic IPv6 neighbor cache entry is considered reachable after a reachability confirmation event After this time expires the neighbor state moves to STALE. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery reachable-time number | |
| Tree | reachable-time | |
| Range | 30 to 3600 | |
| Default | 30 | |
| Units | seconds | |
| Configurable | True | |
| Platforms | Supported on all platforms |
stale-time number
| Description | The maximum time that a dynamic IPv6 neighbor cache entry can remain in the STALE state before it is removed This limit is reached only if no traffic is sent/queued towards the neighbor during the entire duration of the timer. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery stale-time number | |
| Tree | stale-time | |
| Range | 60 to 65535 | |
| Default | 14400 | |
| Units | seconds | |
| Configurable | True | |
| Platforms | Supported on all platforms |
virtual-ipv6-discovery
| Description | Enable Virtual IPv6 discovery on the subinterface and configure associated parameters When enabled, the system will attempt to discover the configured virtual IPv6 addresses on the listed bridged subinterfaces. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery virtual-ipv6-discovery | |
| Tree | virtual-ipv6-discovery | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
address ipv6-address string
| Description | The list of virtual IPv6 addresses to be discovered on the subinterface. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery virtual-ipv6-discovery address ipv6-address string | |
| Tree | address | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e | |
| Max. Elements | 640 |
ipv6-address string
| Description | The virtual IPv6 address. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery virtual-ipv6-discovery address ipv6-address string | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
allowed-macs string
| Description | List of allowed mac addresses for a discovered virtual IP address. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery virtual-ipv6-discovery address ipv6-address string allowed-macs string | |
| Tree | allowed-macs | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e | |
| Max. Elements | 10 |
probe-bridged-subinterfaces string
| Description | Configure the list of bridged sub-interfaces on the associated MAC-VRF to which the NS probes are sent. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery virtual-ipv6-discovery address ipv6-address string probe-bridged-subinterfaces string | |
| Tree | probe-bridged-subinterfaces | |
| String Length | 5 to 25 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e | |
| Max. Elements | 10 |
probe-interval number
| Description | Configure the probe interval at which the system sends a Neighbor Solicitation (NS) for the virtual IPv6 address. The default value of zero determines that the system sends a NS for the virtual IPv6 only when the address is configured. The creation of the Neighbor entry for the virtual IPv6 address will in this case rely on the server sending an unsolicited Neighbor Advertisement for the virtual IPv6 address. When the value is set to a non-zero interval, the system sends a periodic NS at the configured interval and irrespective of the Neighbor entry being already created. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery virtual-ipv6-discovery address ipv6-address string probe-interval number | |
| Tree | probe-interval | |
| Range | 0 | 5 to 86400 | |
| Default | 0 | |
| Units | seconds | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
statistics
| Description | Statistics for the Virtual IP address | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery virtual-ipv6-discovery address ipv6-address string statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-probe-packets number
| Description | The number of probe packets transmitted for the Virtual IP discovery. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery virtual-ipv6-discovery address ipv6-address string statistics out-probe-packets number | |
| Tree | out-probe-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
statistics
| Description | Global statistics for Virtual IP discovery | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery virtual-ipv6-discovery statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-total-probe-packets number
| Description | The number of total probe packets transmitted for Virtual discovery. | |
| Context | interface name string subinterface index number ipv6 neighbor-discovery virtual-ipv6-discovery statistics out-total-probe-packets number | |
| Tree | out-total-probe-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
router-advertisement
| Description | Container for configuring IPv6 router discovery options | |
| Context | interface name string subinterface index number ipv6 router-advertisement | |
| Tree | router-advertisement | |
| Configurable | True | |
| Platforms | Supported on all platforms |
debug keyword
| Description | List of events to debug | |
| Context | interface name string subinterface index number ipv6 router-advertisement debug keyword | |
| Tree | debug | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
router-role
| Description | IPv6 router advertisement options that apply when the role of the interface is a router interface. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role | |
| Tree | router-role | |
| Configurable | True | |
| Platforms | Supported on all platforms |
admin-state keyword
| Description | Administratively enable or disable the sending of router advertisements on the subinterface. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role admin-state keyword | |
| Tree | admin-state | |
| Default | disable | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
current-hop-limit number
| Description | The current hop limit to advertise in the router advertisement messages. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role current-hop-limit number | |
| Tree | current-hop-limit | |
| Default | 64 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
ip-mtu number
| Description | The IP MTU to advertise in the router advertisement messages and that hosts should associate with the link on which these messages are received. If no value is specified the option is not included. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role ip-mtu number | |
| Tree | ip-mtu | |
| Range | 1280 to 9486 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
managed-configuration-flag boolean
| Description | When this is set the M-bit is set in the router advertisement messages, indicating that hosts should use DHCPv6 to obtain IPv6 addresses. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role managed-configuration-flag boolean | |
| Tree | managed-configuration-flag | |
| Default | false | |
| Configurable | True | |
| Platforms | Supported on all platforms |
max-advertisement-interval number
| Description | The maximum time between sending router advertisement messages to the all-nodes multicast address. Each subinterface has its own timer. Whenever the timer fires the message is sent and then the timer is reset to a uniformly distributed random value between min-advertisement-interval and max-advertisement-interval. The RA message can be sent before timer expiry in response to a RS message. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role max-advertisement-interval number | |
| Tree | max-advertisement-interval | |
| Range | 4 to 1800 | |
| Default | 600 | |
| Units | seconds | |
| Configurable | True | |
| Platforms | Supported on all platforms |
min-advertisement-interval number
| Description | The minimum time between sending router advertisement messages to the all-nodes multicast address. Each subinterface has its own timer. Whenever the timer fires the message is sent and then the timer is reset to a uniformly distributed random value between min-advertisement-interval and max-advertisement-interval. The RA message can be sent before timer expiry in response to a RS message. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role min-advertisement-interval number | |
| Tree | min-advertisement-interval | |
| Range | 3 to 1350 | |
| Default | 200 | |
| Units | seconds | |
| Configurable | True | |
| Platforms | Supported on all platforms |
other-configuration-flag boolean
| Description | When this is set the O-bit is set in the router advertisement messages, indicating that hosts should use DHCPv6 to obtain other configuration information (besides addresses). | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role other-configuration-flag boolean | |
| Tree | other-configuration-flag | |
| Default | false | |
| Configurable | True | |
| Platforms | Supported on all platforms |
prefix ipv6-prefix string
| Description | The list of IPv6 prefixes to advertise in the router advertisement messages. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role prefix ipv6-prefix string | |
| Tree | prefix | |
| Configurable | True | |
| Platforms | Supported on all platforms | |
| Max. Elements | 16 |
ipv6-prefix string
| Description | An IPv6 global unicast address prefix. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role prefix ipv6-prefix string | |
| Configurable | True | |
| Platforms | Supported on all platforms |
autonomous-flag boolean
| Description | When this is set in the prefix information option hosts can use the prefix for stateless address autoconfiguration (SLAAC). | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role prefix ipv6-prefix string autonomous-flag boolean | |
| Tree | autonomous-flag | |
| Default | true | |
| Configurable | True | |
| Platforms | Supported on all platforms |
on-link-flag boolean
| Description | When this is set in the prefix information option hosts can use the prefix for on-link determination. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role prefix ipv6-prefix string on-link-flag boolean | |
| Tree | on-link-flag | |
| Default | true | |
| Configurable | True | |
| Platforms | Supported on all platforms |
preferred-lifetime (keyword | number)
| Description | The length of time in seconds (relative to the time the packet is sent) that addresses generated from the prefix via stateless address autoconfiguration remain preferred. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role prefix ipv6-prefix string preferred-lifetime (keyword | number) | |
| Tree | preferred-lifetime | |
| Default | 604800 | |
| Units | seconds | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
valid-lifetime (keyword | number)
| Description | The length of time in seconds (relative to the time the packet is sent) that the prefix is valid for the purpose of on-link determination. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role prefix ipv6-prefix string valid-lifetime (keyword | number) | |
| Tree | valid-lifetime | |
| Default | 2592000 | |
| Units | seconds | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
reachable-time number
| Description | The time, in milliseconds, that is advertised as the reachable time in RA messages and that hosts use for the ICMPv6 Neighbor Unreachability Detection algorithm. A value of zero means unspecified by this router. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role reachable-time number | |
| Tree | reachable-time | |
| Range | 0 to 3600000 | |
| Default | 0 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
retransmit-time number
| Description | The time, in milliseconds, that is advertised as the retrans-timer in RA messages and that hosts use for address resolution and the Neighbor Unreachability Detection algorithm. It represents the time between retransmitted NS messages. A value of zero means unspecified by this router. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role retransmit-time number | |
| Tree | retransmit-time | |
| Range | 0 to 1800000 | |
| Default | 0 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
router-lifetime number
| Description | The lifetime in seconds that is advertised as the router lifetime in RA messages. This indicates the time period for which the advertising router can be used as a default router/gateway. A value of 0 means the router should not be used as a default gateway. | |
| Context | interface name string subinterface index number ipv6 router-advertisement router-role router-lifetime number | |
| Tree | router-lifetime | |
| Range | 0 to 9000 | |
| Default | 1800 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
statistics
| Description | Container for subinterface statistics, counting IPv4 packets or IPv6 packets or both dependending on the context | |
| Context | interface name string subinterface index number ipv6 statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-discarded-packets number
| Description | The total number of input IPv4 packets or IPv6 packets or both (transit and terminating traffic) that were dropped for any of the following reasons: This also includes IP/MPLS packets dropped by ingress interface ACL drop action or CPM filer drop action. | |
| Context | interface name string subinterface index number ipv6 statistics in-discarded-packets number | |
| Tree | in-discarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-error-packets number
| Description | The total number of input IPv4 packets or IPv6 packets or both discarded due to errors, counting transit and terminating traffic The sum of the following RFC 4293 counters: ipIfStatsInHdrErrors ipIfStatsInNoRoutes ipIfStatsInAddrErrors ipIfStatsInUnknownProtos ipIfStatsInTruncatedPkts | |
| Context | interface name string subinterface index number ipv6 statistics in-error-packets number | |
| Tree | in-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-forwarded-octets number
| Description | The number of octets in input IPv4 packets or IPv6 packets or both received on this subinterface and counted in in-forwarded-packets | |
| Context | interface name string subinterface index number ipv6 statistics in-forwarded-octets number | |
| Tree | in-forwarded-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-forwarded-packets number
| Description | The number of input IPv4 packets or IPv6 packets or both received on this subinterface for which the router was not the final destination and for which the router attempted to find a route to forward them to that final destination. Note that non-terminating IPv4 packets with options and non-terminating IPv6 packets with extension headers are included in this count (and not dropped) as are packets that trigger ICMP/ICMPv6 redirect messages. On 7220 IXR systems this also counts received traffic that is terminating. | |
| Context | interface name string subinterface index number ipv6 statistics in-forwarded-packets number | |
| Tree | in-forwarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-matched-ra-packets number
| Description | The total number of IPv6 packets matched with applied RA-Guard policy | |
| Context | interface name string subinterface index number ipv6 statistics in-matched-ra-packets number | |
| Tree | in-matched-ra-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-octets number
| Description | The total number of octets received in input packets, counting transit and terminating traffic | |
| Context | interface name string subinterface index number ipv6 statistics in-octets number | |
| Tree | in-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-packets number
| Description | The total number of input packets received, counting transit and terminating traffic This equals the sum of: in-error-packets in-discarded-packets (also includes IP/MPLS packets) in-terminated-packets (also includes IP/MPLS packets) in-forwarded-packets | |
| Context | interface name string subinterface index number ipv6 statistics in-packets number | |
| Tree | in-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-terminated-octets number
| Description | The total number of octets in input IPv4 packets or IPv6 packets or both that were received on this subinterface and counted in in-terminated-packets | |
| Context | interface name string subinterface index number ipv6 statistics in-terminated-octets number | |
| Tree | in-terminated-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-terminated-packets number
| Description | The total number of input IPv4 packets or IPv6 packets or both that were received on this subinterface and that have a destination IP address matching a local interface address or an IPv6 multicast address to which the interface belongs. The count includes packets eventually discarded by the CPM. Such discards include: This also includes terminating IP/MPLS packets. | |
| Context | interface name string subinterface index number ipv6 statistics in-terminated-packets number | |
| Tree | in-terminated-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
last-clear string
| Description | Timestamp of the last time the subinterface counters were cleared. | |
| Context | interface name string subinterface index number ipv6 statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-discarded-packets number
| Description | The total number of IPv4 packets or IPv6 packets or both, originating and transit, sent towards this subinterface that were dropped. This also includes IP/MPLS packets dropped by egress interface ACL drop action. | |
| Context | interface name string subinterface index number ipv6 statistics out-discarded-packets number | |
| Tree | out-discarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-error-packets number
| Description | The number of IPv4 packets or IPv6 packets or both, originating and transit, for which this router was successful in finding a path to their final destination through this subinterface but an error prevented their transmission. On 7250 IXR systems this is incremented when the IPv4 packet size exceeds the IP MTU and fragmentation was not allowed or not supported | |
| Context | interface name string subinterface index number ipv6 statistics out-error-packets number | |
| Tree | out-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-forwarded-octets number
| Description | The number of octets in transit IPv4 packets or IPv6 packets or both which the router attempted to route out this subinterface | |
| Context | interface name string subinterface index number ipv6 statistics out-forwarded-octets number | |
| Tree | out-forwarded-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-forwarded-packets number
| Description | The number of transit IPv4 packets or IPv6 packets or both which the router attempted to route out this subinterface | |
| Context | interface name string subinterface index number ipv6 statistics out-forwarded-packets number | |
| Tree | out-forwarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-octets number
| Description | The total number of octets in IPv4 packets or IPv6 packets or both delivered to the lower layers for transmission | |
| Context | interface name string subinterface index number ipv6 statistics out-octets number | |
| Tree | out-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-originated-octets number
| Description | The number of octets in IPv4 packets or IPv6 packets or both which originated on the CPM and which the router attempted to route out this subinterface | |
| Context | interface name string subinterface index number ipv6 statistics out-originated-octets number | |
| Tree | out-originated-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-originated-packets number
| Description | The number of IPv4 packets or IPv6 packets or both which originated on the CPM and which the router attempted to route out this subinterface This includes all originated ICMP/ICMPv6 messages. | |
| Context | interface name string subinterface index number ipv6 statistics out-originated-packets number | |
| Tree | out-originated-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-packets number
| Description | The total number of IPv4 packets or IPv6 packets or both that this router supplied to the lower layers for transmission This includes packets generated locally and those forwarded by this router. If there are no queue drops it is equal to: <out-forwarded-packets> + <out-originated-packets> | |
| Context | interface name string subinterface index number ipv6 statistics out-packets number | |
| Tree | out-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
l2-mtu number
| Description | Layer-2 MTU of the subinterface in bytes. Includes the Ethernet header and VLAN tags, and excludes 4-bytes FCS. L2 MTU specifies the maximum sized Ethernet frame that can be transmitted on the subinterface. If a frame exceeds this size it is discarded. If the l2-mtu of the subinterface exceeds the port-mtu of the associated interface, the subinterface will remain operationally down. The default value for a subinterface is taken from /system/mtu/default-l2-mtu. The L2 MTU is only configurable for bridged subinterfaces. The 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D3, 7220 IXR-H2, and 7220 IXR-H3 systems support a maximum L2 MTU of 9412 bytes and minimum of 1500 bytes. All other systems support a maximum L2 MTU of 9500 and minimum of 1500 bytes. | |
| Context | interface name string subinterface index number l2-mtu number | |
| Tree | l2-mtu | |
| Range | 1450 to 9500 | |
| Units | bytes | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
last-change string
| Description | The date and time of the most recent change to the subinterface state | |
| Context | interface name string subinterface index number last-change string | |
| Tree | last-change | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
local-mirror-destination
| Description | Container for options related to local mirror destination | |
| Context | interface name string subinterface index number local-mirror-destination | |
| Tree | local-mirror-destination | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7250 IXR-6e/10e |
admin-state keyword
| Description | The configurable state of the local mirror destination | |
| Context | interface name string subinterface index number local-mirror-destination admin-state keyword | |
| Tree | admin-state | |
| Default | enable | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms except 7250 IXR-6e/10e |
oper-state keyword
| Description | The operational state of the local mirror destination | |
| Context | interface name string subinterface index number local-mirror-destination oper-state keyword | |
| Tree | oper-state | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms except 7250 IXR-6e/10e |
mpls
statistics
| Description | Container for MPLS-specific subinterface statistics | |
| Context | interface name string subinterface index number mpls statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-discarded-packets number
| Description | The total number of MPLS packets that were dropped because they were received with forwarded top label having an MPLS TTL value of 1 | |
| Context | interface name string subinterface index number mpls statistics in-discarded-packets number | |
| Tree | in-discarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-error-packets number
| Description | The total number of MPLS packets that were dropped because they were received with errors that include: | |
| Context | interface name string subinterface index number mpls statistics in-error-packets number | |
| Tree | in-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-forwarded-octets number
| Description | The number of octets in MPLS packets received on this subinterface that were attempted to be forwarded to another IP or MPLS interface | |
| Context | interface name string subinterface index number mpls statistics in-forwarded-octets number | |
| Tree | in-forwarded-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-forwarded-packets number
| Description | The number of MPLS packets received on this subinterface that were attempted to be forwarded to another IP or MPLS interface | |
| Context | interface name string subinterface index number mpls statistics in-forwarded-packets number | |
| Tree | in-forwarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-octets number
| Description | The total number of octets in input MPLS packets received, not counting MPLS packets discarded due to ACLs or IP/MPLS packets that terminated on this router. | |
| Context | interface name string subinterface index number mpls statistics in-octets number | |
| Tree | in-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-packets number
| Description | The total number of input MPLS packets received, not counting MPLS packets discarded due to ACLs or IP/MPLS packets that terminated on this router. This equals the sum of: in-error-packets in-discarded-packets in-forwarded-packets | |
| Context | interface name string subinterface index number mpls statistics in-packets number | |
| Tree | in-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
last-clear string
| Description | Timestamp of the last time the subinterface MPLS counters were cleared. | |
| Context | interface name string subinterface index number mpls statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-error-packets number
| Description | The number of MPLS packets that could not be transmitted on this subinterface because of an error. For now this only counts transmission errors that result from the MPLS packet size exceeding the MPLS MTU of the subinterface. | |
| Context | interface name string subinterface index number mpls statistics out-error-packets number | |
| Tree | out-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-forwarded-octets number
| Description | The number of octets in MPLS packets transmitted on this subinterface. This does not include IP packets that resulted from a PHP pop operation. | |
| Context | interface name string subinterface index number mpls statistics out-forwarded-octets number | |
| Tree | out-forwarded-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-forwarded-packets number
| Description | The number of MPLS packets transmitted on this subinterface. This does not include IP packets that resulted from a PHP pop operation. | |
| Context | interface name string subinterface index number mpls statistics out-forwarded-packets number | |
| Tree | out-forwarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-octets number
| Description | The total number of octets in output MPLS packets transmitted. | |
| Context | interface name string subinterface index number mpls statistics out-octets number | |
| Tree | out-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-originated-octets number
| Description | The number of octets in MPLS packets that were originated by this router. | |
| Context | interface name string subinterface index number mpls statistics out-originated-octets number | |
| Tree | out-originated-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-originated-packets number
| Description | The number of MPLS packets that were originated by this router. | |
| Context | interface name string subinterface index number mpls statistics out-originated-packets number | |
| Tree | out-originated-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-packets number
| Description | The total number of output MPLS packets transmitted. This equals out-originated-packets + out-forwarded-packets | |
| Context | interface name string subinterface index number mpls statistics out-packets number | |
| Tree | out-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
mpls-mtu number
| Description | MPLS MTU of the subinterface in bytes, including the transmitted label stack. MPLS MTU specifies the maximum sized MPLS packet that can be transmitted on the subinterface. If an MPLS packet containing any payload exceeds this size then it is dropped. If the payload of the dropped packet is IPv4 or IPv6 then this may also result in the generation of an ICMP error message that is either tunneled or sent back to the source. The default MPLS MTU for a subinterface is taken from /system/mtu/default-mpls-mtu. The MPLS MTU is not configurable for subinterfaces of loopback interfaces. Each 7250 IXR IMM supports a maximum of 4 different MPLS MTU values. | |
| Context | interface name string subinterface index number mpls-mtu number | |
| Tree | mpls-mtu | |
| Range | 1284 to 9496 | |
| Units | bytes | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
name string
| Description | The system assigned name of the subinterface. It is formed by taking the base interface name and appending a dot (.) and the subinterface index number. For example, ethernet-2/1.0 | |
| Context | interface name string subinterface index number name string | |
| Tree | name | |
| Configurable | False | |
| Platforms | Supported on all platforms |
oper-down-reason keyword
| Description | The first (and possibly only) reason for the subinterface being operationally down | |
| Context | interface name string subinterface index number oper-down-reason keyword | |
| Tree | oper-down-reason | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
oper-state keyword
| Description | The operational state of the subinterface | |
| Context | interface name string subinterface index number oper-state keyword | |
| Tree | oper-state | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
qos
input
classifiers
| Description | Enter the classifiers context | |
| Context | interface name string subinterface index number qos input classifiers | |
| Tree | classifiers | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
default-drop-probability keyword
| Description | The default drop-probability for packets arriving on this subinterface that do not match any classification rule. | |
| Context | interface name string subinterface index number qos input classifiers default-drop-probability keyword | |
| Tree | default-drop-probability | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
default-forwarding-class (reference | keyword)
| Description | The default forwarding class for packets arriving on this subinterface that do not match any classification rule. | |
| Context | interface name string subinterface index number qos input classifiers default-forwarding-class (reference | keyword) | |
| Tree | default-forwarding-class | |
| Options |
| |
| Reference | qos forwarding-classes forwarding-class name string | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
dot1p-policy reference
| Description | Reference to the name of a dot1p mapping policy. | |
| Context | interface name string subinterface index number qos input classifiers dot1p-policy reference | |
| Tree | dot1p-policy | |
| Reference | qos classifiers dot1p-policy name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
dscp-policy reference
| Description | Reference to the name of a DSCP mapping policy that applies to both IPv4 and IPv6 traffic. | |
| Context | interface name string subinterface index number qos input classifiers dscp-policy reference | |
| Tree | dscp-policy | |
| Reference | qos classifiers dscp-policy name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4 |
ipv4-dscp-policy reference
| Description | Reference to the name of a DSCP mapping policy that applies only to IPv4 traffic. | |
| Context | interface name string subinterface index number qos input classifiers ipv4-dscp-policy reference | |
| Tree | ipv4-dscp-policy | |
| Reference | qos classifiers dscp-policy name string | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
ipv6-dscp-policy reference
| Description | Reference to the name of a DSCP mapping policy that applies only to IPv6 traffic. | |
| Context | interface name string subinterface index number qos input classifiers ipv6-dscp-policy reference | |
| Tree | ipv6-dscp-policy | |
| Reference | qos classifiers dscp-policy name string | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
mpls-traffic-class-policy reference
| Description | Reference to the name of an MPLS traffic-class mapping policy | |
| Context | interface name string subinterface index number qos input classifiers mpls-traffic-class-policy reference | |
| Tree | mpls-traffic-class-policy | |
| Reference | qos classifiers mpls-traffic-class-policy name string | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
multifield
| Description | Enter the multifield context | |
| Context | interface name string subinterface index number qos input classifiers multifield | |
| Tree | multifield | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
ipv4-policy reference
| Description | Reference to the name of an IPv4 multifield classifier policy. | |
| Context | interface name string subinterface index number qos input classifiers multifield ipv4-policy reference | |
| Tree | ipv4-policy | |
| Reference | qos classifiers multifield ipv4-policy name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
ipv6-policy reference
| Description | Reference to the name of an IPv6 multifield classifier policy. | |
| Context | interface name string subinterface index number qos input classifiers multifield ipv6-policy reference | |
| Tree | ipv6-policy | |
| Reference | qos classifiers multifield ipv6-policy name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
policer-templates
| Description | acl policers | |
| Context | interface name string subinterface index number qos input policer-templates | |
| Tree | policer-templates | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
policer-template reference
| Description | The name of the policer template applied to input traffic on the subinterface | |
| Context | interface name string subinterface index number qos input policer-templates policer-template reference | |
| Tree | policer-template | |
| Reference | qos policer-templates policer-template name string | |
| Configurable | True | |
| Platforms | Supported on all platforms |
output
rewrite-rules
| Description | Enter the rewrite-rules context | |
| Context | interface name string subinterface index number qos output rewrite-rules | |
| Tree | rewrite-rules | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7220 IXR-D1 |
dot1p-policy reference
| Description | Reference to the name of a dot1p rewrite policy. | |
| Context | interface name string subinterface index number qos output rewrite-rules dot1p-policy reference | |
| Tree | dot1p-policy | |
| Reference | qos rewrite-rules dot1p-policy name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
dscp-policy reference
| Description | Reference to the name of a DSCP rewrite-rule policy that applies to both IPv4 and IPv6 traffic. | |
| Context | interface name string subinterface index number qos output rewrite-rules dscp-policy reference | |
| Tree | dscp-policy | |
| Reference | qos rewrite-rules dscp-policy name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4 |
ipv4-dscp-policy reference
| Description | Reference to the name of a DSCP rewrite-rule policy that applies only to IPv4 traffic. | |
| Context | interface name string subinterface index number qos output rewrite-rules ipv4-dscp-policy reference | |
| Tree | ipv4-dscp-policy | |
| Reference | qos rewrite-rules dscp-policy name string | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
ipv6-dscp-policy reference
| Description | Reference to the name of a DSCP rewrite-rule policy that applies only to IPv6 traffic. | |
| Context | interface name string subinterface index number qos output rewrite-rules ipv6-dscp-policy reference | |
| Tree | ipv6-dscp-policy | |
| Reference | qos rewrite-rules dscp-policy name string | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
mpls-traffic-class-policy reference
| Description | Reference to the name of an MPLS traffic-class rewrite-rule policy. | |
| Context | interface name string subinterface index number qos output rewrite-rules mpls-traffic-class-policy reference | |
| Tree | mpls-traffic-class-policy | |
| Reference | qos rewrite-rules mpls-traffic-class-policy name string | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
ra-guard
policy reference
| Description | Reference to RA Guard Policy to apply to the associated subinterface | |
| Context | interface name string subinterface index number ra-guard policy reference | |
| Tree | policy | |
| Reference | system ra-guard-policy name string | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
vlan-list vlan-id number
vlan-id number
statistics
| Description | Container for subinterface statistics, counting IPv4 packets or IPv6 packets or both dependending on the context | |
| Context | interface name string subinterface index number statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-discarded-packets number
| Description | The total number of input IPv4 packets or IPv6 packets or both (transit and terminating traffic) that were dropped for any of the following reasons: This also includes IP/MPLS packets dropped by ingress interface ACL drop action or CPM filer drop action. | |
| Context | interface name string subinterface index number statistics in-discarded-packets number | |
| Tree | in-discarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-error-packets number
| Description | The total number of input IPv4 packets or IPv6 packets or both discarded due to errors, counting transit and terminating traffic The sum of the following RFC 4293 counters: ipIfStatsInHdrErrors ipIfStatsInNoRoutes ipIfStatsInAddrErrors ipIfStatsInUnknownProtos ipIfStatsInTruncatedPkts | |
| Context | interface name string subinterface index number statistics in-error-packets number | |
| Tree | in-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-forwarded-octets number
| Description | The number of octets in input IPv4 packets or IPv6 packets or both received on this subinterface and counted in in-forwarded-packets | |
| Context | interface name string subinterface index number statistics in-forwarded-octets number | |
| Tree | in-forwarded-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-forwarded-packets number
| Description | The number of input IPv4 packets or IPv6 packets or both received on this subinterface for which the router was not the final destination and for which the router attempted to find a route to forward them to that final destination. Note that non-terminating IPv4 packets with options and non-terminating IPv6 packets with extension headers are included in this count (and not dropped) as are packets that trigger ICMP/ICMPv6 redirect messages. On 7220 IXR systems this also counts received traffic that is terminating. | |
| Context | interface name string subinterface index number statistics in-forwarded-packets number | |
| Tree | in-forwarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-matched-ra-packets number
| Description | The total number of IPv6 packets matched with applied RA-Guard policy | |
| Context | interface name string subinterface index number statistics in-matched-ra-packets number | |
| Tree | in-matched-ra-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-octets number
| Description | The total number of octets received in input packets, counting transit and terminating traffic | |
| Context | interface name string subinterface index number statistics in-octets number | |
| Tree | in-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-packets number
| Description | The total number of input packets received, counting transit and terminating traffic This equals the sum of: in-error-packets in-discarded-packets (also includes IP/MPLS packets) in-terminated-packets (also includes IP/MPLS packets) in-forwarded-packets | |
| Context | interface name string subinterface index number statistics in-packets number | |
| Tree | in-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-terminated-octets number
| Description | The total number of octets in input IPv4 packets or IPv6 packets or both that were received on this subinterface and counted in in-terminated-packets | |
| Context | interface name string subinterface index number statistics in-terminated-octets number | |
| Tree | in-terminated-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
in-terminated-packets number
| Description | The total number of input IPv4 packets or IPv6 packets or both that were received on this subinterface and that have a destination IP address matching a local interface address or an IPv6 multicast address to which the interface belongs. The count includes packets eventually discarded by the CPM. Such discards include: This also includes terminating IP/MPLS packets. | |
| Context | interface name string subinterface index number statistics in-terminated-packets number | |
| Tree | in-terminated-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
last-clear string
| Description | Timestamp of the last time the subinterface counters were cleared. | |
| Context | interface name string subinterface index number statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-discarded-packets number
| Description | The total number of IPv4 packets or IPv6 packets or both, originating and transit, sent towards this subinterface that were dropped. This also includes IP/MPLS packets dropped by egress interface ACL drop action. | |
| Context | interface name string subinterface index number statistics out-discarded-packets number | |
| Tree | out-discarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-error-packets number
| Description | The number of IPv4 packets or IPv6 packets or both, originating and transit, for which this router was successful in finding a path to their final destination through this subinterface but an error prevented their transmission. On 7250 IXR systems this is incremented when the IPv4 packet size exceeds the IP MTU and fragmentation was not allowed or not supported | |
| Context | interface name string subinterface index number statistics out-error-packets number | |
| Tree | out-error-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
out-forwarded-octets number
| Description | The number of octets in transit IPv4 packets or IPv6 packets or both which the router attempted to route out this subinterface | |
| Context | interface name string subinterface index number statistics out-forwarded-octets number | |
| Tree | out-forwarded-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-forwarded-packets number
| Description | The number of transit IPv4 packets or IPv6 packets or both which the router attempted to route out this subinterface | |
| Context | interface name string subinterface index number statistics out-forwarded-packets number | |
| Tree | out-forwarded-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-octets number
| Description | The total number of octets in IPv4 packets or IPv6 packets or both delivered to the lower layers for transmission | |
| Context | interface name string subinterface index number statistics out-octets number | |
| Tree | out-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-originated-octets number
| Description | The number of octets in IPv4 packets or IPv6 packets or both which originated on the CPM and which the router attempted to route out this subinterface | |
| Context | interface name string subinterface index number statistics out-originated-octets number | |
| Tree | out-originated-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-originated-packets number
| Description | The number of IPv4 packets or IPv6 packets or both which originated on the CPM and which the router attempted to route out this subinterface This includes all originated ICMP/ICMPv6 messages. | |
| Context | interface name string subinterface index number statistics out-originated-packets number | |
| Tree | out-originated-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-packets number
| Description | The total number of IPv4 packets or IPv6 packets or both that this router supplied to the lower layers for transmission This includes packets generated locally and those forwarded by this router. If there are no queue drops it is equal to: <out-forwarded-packets> + <out-originated-packets> | |
| Context | interface name string subinterface index number statistics out-packets number | |
| Tree | out-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
type identityref
| Description | Indicates the context in which the ethernet subinterface will be used | |
| Context | interface name string subinterface index number type identityref | |
| Tree | type | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
vlan
encap
single-tagged
| Description | When present, tagged frames with a specific, non-zero, outer VLAN ID are associated to the subinterface The outer VLAN-ID tag is considered service delimiting and it is by default stripped at ingress and restored/added on egress. | |
| Context | interface name string subinterface index number vlan encap single-tagged | |
| Tree | single-tagged | |
| Configurable | True | |
| Platforms | Supported on all platforms |
vlan-id (number | keyword)
| Description | VLAN identifier for single-tagged packets. | |
| Context | interface name string subinterface index number vlan encap single-tagged vlan-id (number | keyword) | |
| Tree | vlan-id | |
| Range | 1 to 4094 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
single-tagged-range
| Description | When present, tagged frames with a specific, non-zero, outer VLAN ID contained in a specified set of range are associated to the subinterface. The outer VLAN ID tag of the frame is not stripped off on ingress, and no tag is pushed on egress. | |
| Context | interface name string subinterface index number vlan encap single-tagged-range | |
| Tree | single-tagged-range | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
low-vlan-id range-low-vlan-id number
| Description | Enter the low-vlan-id list instance | |
| Context | interface name string subinterface index number vlan encap single-tagged-range low-vlan-id range-low-vlan-id number | |
| Tree | low-vlan-id | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 | |
| Max. Elements | 8 | |
| Min. Elements | 1 |
range-low-vlan-id number
| Description | The low-value VLAN identifier in a range for single-tagged packets. The range is matched inclusively. | |
| Context | interface name string subinterface index number vlan encap single-tagged-range low-vlan-id range-low-vlan-id number | |
| Range | 1 to 4094 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
high-vlan-id number
| Description | The high-value VLAN identifier in a range for single-tagged packets. The range is matched inclusively. | |
| Context | interface name string subinterface index number vlan encap single-tagged-range low-vlan-id range-low-vlan-id number high-vlan-id number | |
| Tree | high-vlan-id | |
| Range | 1 to 4094 | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
untagged
| Description | When present, untagged frames and VLAN ID 0 priority tagged frames are associated to the subinterface when it belongs to an interface with vlan-tagging enabled. | |
| Context | interface name string subinterface index number vlan encap untagged | |
| Tree | untagged | |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
tpid identityref
| Description | Optionally set the tag protocol identifier field (TPID) that is accepted on the VLAN | |
| Context | interface name string tpid identityref | |
| Tree | tpid | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4 |
traffic-rate
| Description | Container for traffic rate statistics | |
| Context | interface name string traffic-rate | |
| Tree | traffic-rate | |
| Configurable | False | |
| Platforms | Supported on all platforms |
in-bps number
| Description | The ingress bandwidth utilization of the port | |
| Context | interface name string traffic-rate in-bps number | |
| Tree | in-bps | |
| Configurable | False | |
| Platforms | Supported on all platforms |
out-bps number
| Description | The egress bandwidth utilization of the port | |
| Context | interface name string traffic-rate out-bps number | |
| Tree | out-bps | |
| Configurable | False | |
| Platforms | Supported on all platforms |
transceiver
| Description | Enter the transceiver context | |
| Context | interface name string transceiver | |
| Tree | transceiver | |
| Configurable | True | |
| Platforms | Supported on all platforms |
channel index number
index number
| Description | Index of the physical channel or lane | |
| Context | interface name string transceiver channel index number | |
| Range | 1 to 10 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
input-power
| Description | Enter the input-power context | |
| Context | interface name string transceiver channel index number input-power | |
| Tree | input-power | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-condition boolean
| Description | High alarm threshold condition. Set to true whenever the Rx power is above the high-alarm-threshold and set to false whenever the Rx power is below the high-alarm-threshold | |
| Context | interface name string transceiver channel index number input-power high-alarm-condition boolean | |
| Tree | high-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-threshold decimal-number
| Description | High alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number input-power high-alarm-threshold decimal-number | |
| Tree | high-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-condition boolean
| Description | High warning threshold condition. Set to true whenever the Rx power is above the high-warning-threshold and set to false whenever the Rx power is below the high-warning-threshold | |
| Context | interface name string transceiver channel index number input-power high-warning-condition boolean | |
| Tree | high-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-threshold decimal-number
| Description | High warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number input-power high-warning-threshold decimal-number | |
| Tree | high-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
latest-value decimal-number
| Description | The current value of the optical Rx power in dBm | |
| Context | interface name string transceiver channel index number input-power latest-value decimal-number | |
| Tree | latest-value | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-condition boolean
| Description | Low alarm threshold condition. Set to true whenever the Rx power is below the low-alarm-threshold and set to false whenever the Rx power is above the low-alarm-threshold | |
| Context | interface name string transceiver channel index number input-power low-alarm-condition boolean | |
| Tree | low-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-threshold decimal-number
| Description | Low alarm threshold condition. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number input-power low-alarm-threshold decimal-number | |
| Tree | low-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-condition boolean
| Description | Low warning threshold condition. Set to true whenever the Rx power is below the low-warning-threshold and set to false whenever the Rx power is above the low-warning-threshold | |
| Context | interface name string transceiver channel index number input-power low-warning-condition boolean | |
| Tree | low-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-threshold decimal-number
| Description | Low warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number input-power low-warning-threshold decimal-number | |
| Tree | low-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
laser-bias-current
| Description | Enter the laser-bias-current context | |
| Context | interface name string transceiver channel index number laser-bias-current | |
| Tree | laser-bias-current | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-condition boolean
| Description | High alarm threshold condition. Set to true whenever the laser bias current is above the high-alarm-threshold and set to false whenever the laser bias current is below the high-alarm-threshold | |
| Context | interface name string transceiver channel index number laser-bias-current high-alarm-condition boolean | |
| Tree | high-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-threshold decimal-number
| Description | High alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number laser-bias-current high-alarm-threshold decimal-number | |
| Tree | high-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-condition boolean
| Description | High warning threshold condition. Set to true whenever the laser bias current is above the high-warning-threshold and set to false whenever the laser bias current is below the high-warning-threshold | |
| Context | interface name string transceiver channel index number laser-bias-current high-warning-condition boolean | |
| Tree | high-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-threshold decimal-number
| Description | High warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number laser-bias-current high-warning-threshold decimal-number | |
| Tree | high-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
latest-value decimal-number
| Description | The current value of the laser bias current in mA | |
| Context | interface name string transceiver channel index number laser-bias-current latest-value decimal-number | |
| Tree | latest-value | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-condition boolean
| Description | Low alarm threshold condition. Set to true whenever the laser bias current is below the low-alarm-threshold and set to false whenever the laser bias current is above the low-alarm-threshold | |
| Context | interface name string transceiver channel index number laser-bias-current low-alarm-condition boolean | |
| Tree | low-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-threshold decimal-number
| Description | Low alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number laser-bias-current low-alarm-threshold decimal-number | |
| Tree | low-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-condition boolean
| Description | Low warning threshold condition. Set to true whenever the laser bias current is below the low-warning-threshold and set to false whenever the laser bias current is above the low-warning-threshold | |
| Context | interface name string transceiver channel index number laser-bias-current low-warning-condition boolean | |
| Tree | low-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-threshold decimal-number
| Description | Low warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number laser-bias-current low-warning-threshold decimal-number | |
| Tree | low-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
output-power
| Description | Enter the output-power context | |
| Context | interface name string transceiver channel index number output-power | |
| Tree | output-power | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-condition boolean
| Description | High alarm threshold condition. Set to true whenever the Tx power is above the high-alarm-threshold and set to false whenever the Tx power is below the high-alarm-threshold | |
| Context | interface name string transceiver channel index number output-power high-alarm-condition boolean | |
| Tree | high-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-threshold decimal-number
| Description | High alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number output-power high-alarm-threshold decimal-number | |
| Tree | high-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-condition boolean
| Description | High warning threshold condition. Set to true whenever the Tx power is above the high-warning-threshold and set to false whenever the Tx power is below the high-warning-threshold | |
| Context | interface name string transceiver channel index number output-power high-warning-condition boolean | |
| Tree | high-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-threshold decimal-number
| Description | High warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number output-power high-warning-threshold decimal-number | |
| Tree | high-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
latest-value decimal-number
| Description | The current value of the optical Tx power in dBm | |
| Context | interface name string transceiver channel index number output-power latest-value decimal-number | |
| Tree | latest-value | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-condition boolean
| Description | Low alarm threshold condition. Set to true whenever the Tx power is below the low-alarm-threshold and set to false whenever the Tx power is above the low-alarm-threshold | |
| Context | interface name string transceiver channel index number output-power low-alarm-condition boolean | |
| Tree | low-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-threshold decimal-number
| Description | Low alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number output-power low-alarm-threshold decimal-number | |
| Tree | low-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-condition boolean
| Description | Low warning threshold condition. Set to true whenever the Tx power is below the low-warning-threshold and set to false whenever the Tx power is above the low-warning-threshold | |
| Context | interface name string transceiver channel index number output-power low-warning-condition boolean | |
| Tree | low-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-threshold decimal-number
| Description | Low warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver channel index number output-power low-warning-threshold decimal-number | |
| Tree | low-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
wavelength decimal-number
| Description | Wavelength of the transmitting laser in nanometers | |
| Context | interface name string transceiver channel index number wavelength decimal-number | |
| Tree | wavelength | |
| Configurable | False | |
| Platforms | Supported on all platforms |
connector-type keyword
| Description | Specifies the fiber connector type of the transceiver associated with the port | |
| Context | interface name string transceiver connector-type keyword | |
| Tree | connector-type | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
date-code string
| Description | Transceiver date code. | |
| Context | interface name string transceiver date-code string | |
| Tree | date-code | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
ddm-events boolean
| Description | Controls the reporting of DDM events When set to true, log events and state related to the Digital Diagnostic Monitoring (DDM) capabilities of the transceiver are generated and populated. When set to false, no DDM-related log events and state are generated and populated for this port/transceiver. When read from state this leaf always returns false (even if the configured value is true) when the Ethernet port is a copper/RJ45 port. | |
| Context | interface name string transceiver ddm-events boolean | |
| Tree | ddm-events | |
| Configurable | True | |
| Platforms | Supported on all platforms |
ethernet-pmd string
| Description | Specifies the Ethernet compliance code of the transceiver associated with the port | |
| Context | interface name string transceiver ethernet-pmd string | |
| Tree | ethernet-pmd | |
| Configurable | False | |
| Platforms | Supported on all platforms |
fault-condition boolean
| Description | Indicates if a fault condition exists in the transceiver. | |
| Context | interface name string transceiver fault-condition boolean | |
| Tree | fault-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
form-factor keyword
| Description | Specifies the transceiver form factor associated with the port | |
| Context | interface name string transceiver form-factor keyword | |
| Tree | form-factor | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
forward-error-correction keyword
| Description | The forward error correction algorithm to use on the optical channel The same FEC algorithm must be used at both ends of a link. 25G interfaces support disabled, base-r rs-108 and rs-528; configuring other (incompatible) options will bring the port down. The FEC requirement for a 25G interface depends on the cable type. A CA-N DAC cable has a loss specification that requires no FEC. A CA-S DAC cable requires base-r FEC at a minimum. A CA-L DAC cable requires the stronger rs-108 Reed Solomon FEC. 100G interfaces support disabled and rs-528; configuring other (incompatible) options will bring the port down. 400G interfaces require rs-544; configuring other (unsupported) options will bring the port down. | |
| Context | interface name string transceiver forward-error-correction keyword | |
| Tree | forward-error-correction | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
healthz
| Description | The health of the component The paramaters within this container indicate the status of the component beyond whether it is operationally up or down. When a signal is received that a component is in an unhealthy state the gNOI.Healthz service can be used to retrieve further diagnostic information relating to the component. The contents of this directory relate only to the specific component that it is associated with. | |
| Context | interface name string transceiver healthz | |
| Tree | healthz | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
last-unhealthy string
| Description | Last unhealthy time The time at which the component was last observed to transition from the healthy state to any other state, represented as nanoseconds since the Unix epoch. | |
| Context | interface name string transceiver healthz last-unhealthy string | |
| Tree | last-unhealthy | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
status keyword
| Description | Health status The status of the component, indicating its current health. | |
| Context | interface name string transceiver healthz status keyword | |
| Tree | status | |
| Options |
| |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
unhealthy-count number
| Description | Unhealthy count The number of times the component has transitioned from the healthy state to any other state. | |
| Context | interface name string transceiver healthz unhealthy-count number | |
| Tree | unhealthy-count | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e |
input-power
| Description | Enter the input-power context | |
| Context | interface name string transceiver input-power | |
| Tree | input-power | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-condition boolean
| Description | High alarm threshold condition. Set to true whenever the Rx power is above the high-alarm-threshold and set to false whenever the Rx power is below the high-alarm-threshold | |
| Context | interface name string transceiver input-power high-alarm-condition boolean | |
| Tree | high-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-threshold decimal-number
| Description | High alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver input-power high-alarm-threshold decimal-number | |
| Tree | high-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-condition boolean
| Description | High warning threshold condition. Set to true whenever the Rx power is above the high-warning-threshold and set to false whenever the Rx power is below the high-warning-threshold | |
| Context | interface name string transceiver input-power high-warning-condition boolean | |
| Tree | high-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-threshold decimal-number
| Description | High warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver input-power high-warning-threshold decimal-number | |
| Tree | high-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
latest-value decimal-number
| Description | The current value of the optical Rx power in dBm | |
| Context | interface name string transceiver input-power latest-value decimal-number | |
| Tree | latest-value | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-condition boolean
| Description | Low alarm threshold condition. Set to true whenever the Rx power is below the low-alarm-threshold and set to false whenever the Rx power is above the low-alarm-threshold | |
| Context | interface name string transceiver input-power low-alarm-condition boolean | |
| Tree | low-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-threshold decimal-number
| Description | Low alarm threshold condition. Read from the installed transceiver | |
| Context | interface name string transceiver input-power low-alarm-threshold decimal-number | |
| Tree | low-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-condition boolean
| Description | Low warning threshold condition. Set to true whenever the Rx power is below the low-warning-threshold and set to false whenever the Rx power is above the low-warning-threshold | |
| Context | interface name string transceiver input-power low-warning-condition boolean | |
| Tree | low-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-threshold decimal-number
| Description | Low warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver input-power low-warning-threshold decimal-number | |
| Tree | low-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
laser-bias-current
| Description | Enter the laser-bias-current context | |
| Context | interface name string transceiver laser-bias-current | |
| Tree | laser-bias-current | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-condition boolean
| Description | High alarm threshold condition. Set to true whenever the laser bias current is above the high-alarm-threshold and set to false whenever the laser bias current is below the high-alarm-threshold | |
| Context | interface name string transceiver laser-bias-current high-alarm-condition boolean | |
| Tree | high-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-threshold decimal-number
| Description | High alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver laser-bias-current high-alarm-threshold decimal-number | |
| Tree | high-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-condition boolean
| Description | High warning threshold condition. Set to true whenever the laser bias current is above the high-warning-threshold and set to false whenever the laser bias current is below the high-warning-threshold | |
| Context | interface name string transceiver laser-bias-current high-warning-condition boolean | |
| Tree | high-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-threshold decimal-number
| Description | High warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver laser-bias-current high-warning-threshold decimal-number | |
| Tree | high-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
latest-value decimal-number
| Description | The current value of the laser bias current in mA | |
| Context | interface name string transceiver laser-bias-current latest-value decimal-number | |
| Tree | latest-value | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-condition boolean
| Description | Low alarm threshold condition. Set to true whenever the laser bias current is below the low-alarm-threshold and set to false whenever the laser bias current is above the low-alarm-threshold | |
| Context | interface name string transceiver laser-bias-current low-alarm-condition boolean | |
| Tree | low-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-threshold decimal-number
| Description | Low alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver laser-bias-current low-alarm-threshold decimal-number | |
| Tree | low-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-condition boolean
| Description | Low warning threshold condition. Set to true whenever the laser bias current is below the low-warning-threshold and set to false whenever the laser bias current is above the low-warning-threshold | |
| Context | interface name string transceiver laser-bias-current low-warning-condition boolean | |
| Tree | low-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-threshold decimal-number
| Description | Low warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver laser-bias-current low-warning-threshold decimal-number | |
| Tree | low-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
oper-down-reason keyword
| Description | The reason for the transceiver being operationally down | |
| Context | interface name string transceiver oper-down-reason keyword | |
| Tree | oper-down-reason | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
oper-state keyword
| Description | The operational state of the transceiver The oper-state is always down when the Ethernet port is a copper/RJ45 port. | |
| Context | interface name string transceiver oper-state keyword | |
| Tree | oper-state | |
| Options |
| |
| Configurable | False | |
| Platforms | Supported on all platforms |
output-power
| Description | Enter the output-power context | |
| Context | interface name string transceiver output-power | |
| Tree | output-power | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-condition boolean
| Description | High alarm threshold condition. Set to true whenever the Tx power is above the high-alarm-threshold and set to false whenever the Tx power is below the high-alarm-threshold | |
| Context | interface name string transceiver output-power high-alarm-condition boolean | |
| Tree | high-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-threshold decimal-number
| Description | High alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver output-power high-alarm-threshold decimal-number | |
| Tree | high-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-condition boolean
| Description | High warning threshold condition. Set to true whenever the Tx power is above the high-warning-threshold and set to false whenever the Tx power is below the high-warning-threshold | |
| Context | interface name string transceiver output-power high-warning-condition boolean | |
| Tree | high-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-threshold decimal-number
| Description | High warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver output-power high-warning-threshold decimal-number | |
| Tree | high-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
latest-value decimal-number
| Description | The current value of the optical Tx power in dBm | |
| Context | interface name string transceiver output-power latest-value decimal-number | |
| Tree | latest-value | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-condition boolean
| Description | Low alarm threshold condition. Set to true whenever the Tx power is below the low-alarm-threshold and set to false whenever the Tx power is above the low-alarm-threshold | |
| Context | interface name string transceiver output-power low-alarm-condition boolean | |
| Tree | low-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-threshold decimal-number
| Description | Low alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver output-power low-alarm-threshold decimal-number | |
| Tree | low-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-condition boolean
| Description | Low warning threshold condition. Set to true whenever the Tx power is below the low-warning-threshold and set to false whenever the Tx power is above the low-warning-threshold | |
| Context | interface name string transceiver output-power low-warning-condition boolean | |
| Tree | low-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-threshold decimal-number
| Description | Low warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver output-power low-warning-threshold decimal-number | |
| Tree | low-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
serial-number string
| Description | Transceiver serial number This is the information as read from the EEPROM of the part. | |
| Context | interface name string transceiver serial-number string | |
| Tree | serial-number | |
| Configurable | False | |
| Platforms | Supported on all platforms |
temperature
| Description | Enter the temperature context | |
| Context | interface name string transceiver temperature | |
| Tree | temperature | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-condition boolean
| Description | High alarm threshold condition Set to true whenever the temperature is above the high-alarm-threshold and set to false whenever the temperature is below the high-alarm-threshold | |
| Context | interface name string transceiver temperature high-alarm-condition boolean | |
| Tree | high-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-threshold number
| Description | High alarm threshold Read from the installed transceiver | |
| Context | interface name string transceiver temperature high-alarm-threshold number | |
| Tree | high-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-condition boolean
| Description | High warning threshold condition. Set to true whenever the temperature is above the high-warning-threshold and set to false whenever the temperature is below the high-warning-threshold | |
| Context | interface name string transceiver temperature high-warning-condition boolean | |
| Tree | high-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-threshold number
| Description | High warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver temperature high-warning-threshold number | |
| Tree | high-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
latest-value number
| Description | The current temperature of the transceiver module in degrees Celsius | |
| Context | interface name string transceiver temperature latest-value number | |
| Tree | latest-value | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-condition boolean
| Description | Low alarm threshold condition. Set to true whenever the temperature is below the low-alarm-threshold and set to false whenever the temperature is above the low-alarm-threshold | |
| Context | interface name string transceiver temperature low-alarm-condition boolean | |
| Tree | low-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-threshold number
| Description | Low alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver temperature low-alarm-threshold number | |
| Tree | low-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-condition boolean
| Description | Low warning threshold condition. Set to true whenever the temperature is below the low-warning-threshold and set to false whenever the temperature is above the low-warning-threshold | |
| Context | interface name string transceiver temperature low-warning-condition boolean | |
| Tree | low-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-threshold number
| Description | Low warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver temperature low-warning-threshold number | |
| Tree | low-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
maximum number
| Description | Represents the highest temperature the transceiver has reached since it booted | |
| Context | interface name string transceiver temperature maximum number | |
| Tree | maximum | |
| Configurable | False | |
| Platforms | Supported on all platforms |
maximum-time string
| Description | Indicates the time this transceiver reached the temperature referenced in maximum | |
| Context | interface name string transceiver temperature maximum-time string | |
| Tree | maximum-time | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
tx-laser boolean
| Description | Enable (true) or disable (false) the transmit laser of the transceiver When read from state this leaf always returns false (even if the configured value is true) when the Ethernet port is a copper/RJ45 port. Default is true (for interfaces that support transceivers). | |
| Context | interface name string transceiver tx-laser boolean | |
| Tree | tx-laser | |
| Configurable | True | |
| Platforms | Supported on all platforms |
vendor string
| Description | Name of the transceiver vendor This is the information as read from the EEPROM of the part. | |
| Context | interface name string transceiver vendor string | |
| Tree | vendor | |
| Configurable | False | |
| Platforms | Supported on all platforms |
vendor-lot-number string
| Description | Vendor's lot number for the transceiver This is the information as read from the EEPROM of the part. | |
| Context | interface name string transceiver vendor-lot-number string | |
| Tree | vendor-lot-number | |
| Configurable | False | |
| Platforms | Supported on all platforms |
vendor-part-number string
| Description | Vendor's part number for the transceiver This is the information as read from the EEPROM of the part. | |
| Context | interface name string transceiver vendor-part-number string | |
| Tree | vendor-part-number | |
| Configurable | False | |
| Platforms | Supported on all platforms |
vendor-revision string
| Description | Vendor's revision number for the transceiver This is the information as read from the EEPROM of the part. | |
| Context | interface name string transceiver vendor-revision string | |
| Tree | vendor-revision | |
| Configurable | False | |
| Platforms | Supported on all platforms |
voltage
| Description | Enter the voltage context | |
| Context | interface name string transceiver voltage | |
| Tree | voltage | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-condition boolean
| Description | High alarm threshold condition. Set to true whenever the module voltage is above the high-alarm-threshold and set to false whenever the module voltage is below the high-alarm-threshold | |
| Context | interface name string transceiver voltage high-alarm-condition boolean | |
| Tree | high-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-alarm-threshold decimal-number
| Description | High alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver voltage high-alarm-threshold decimal-number | |
| Tree | high-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-condition boolean
| Description | High warning threshold condition. Set to true whenever the module voltage is above the high-warning-threshold and set to false whenever the module voltage is below the high-warning-threshold | |
| Context | interface name string transceiver voltage high-warning-condition boolean | |
| Tree | high-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
high-warning-threshold decimal-number
| Description | High warning threshold. Read from the installed transceiver | |
| Context | interface name string transceiver voltage high-warning-threshold decimal-number | |
| Tree | high-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
latest-value decimal-number
| Description | The current voltage reading of the transceiver module (in Volts) | |
| Context | interface name string transceiver voltage latest-value decimal-number | |
| Tree | latest-value | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-condition boolean
| Description | Low alarm threshold condition. Set to true whenever the module voltage is below the low-alarm-threshold and set to false whenever the module voltage is above the low-alarm-threshold | |
| Context | interface name string transceiver voltage low-alarm-condition boolean | |
| Tree | low-alarm-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-alarm-threshold decimal-number
| Description | Low alarm threshold. Read from the installed transceiver | |
| Context | interface name string transceiver voltage low-alarm-threshold decimal-number | |
| Tree | low-alarm-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-condition boolean
| Description | Low warning threshold condition. Set to true whenever the module voltage is below the low-warning-threshold and set to false whenever the module voltage is above the low-warning-threshold | |
| Context | interface name string transceiver voltage low-warning-condition boolean | |
| Tree | low-warning-condition | |
| Configurable | False | |
| Platforms | Supported on all platforms |
low-warning-threshold decimal-number
| Description | Low warning threshold . Read from the installed transceiver | |
| Context | interface name string transceiver voltage low-warning-threshold decimal-number | |
| Tree | low-warning-threshold | |
| Configurable | False | |
| Platforms | Supported on all platforms |
wavelength decimal-number
| Description | Wavelength of the transmitting laser in nanometers | |
| Context | interface name string transceiver wavelength decimal-number | |
| Tree | wavelength | |
| Configurable | False | |
| Platforms | Supported on all platforms |
vlan-tagging boolean
| Description | When set to true the interface is allowed to accept frames with one or more VLAN tags | |
| Context | interface name string vlan-tagging boolean | |
| Tree | vlan-tagging | |
| Configurable | True | |
| Platforms | Supported on all platforms |