Procedure 14-1: Install software on the PC

- Overview

Use this procedure to install the WaveStar® CIT software and/or the NE software generic on a personal computer (PC).

- Required equipment

The following equipment is required:

  • Personal Computer (PC) with at least one network interface card (NIC).

  • Copy of the CD-ROM that includes the WaveStar® CIT software and NE software.

  • Current Alcatel-Lucent 1665 Data Multiplexer (DMX) Software Release Description for the software generic being installed.

- Before you begin

Before beginning the software installation procedure, complete the following steps:

  1. Become familiar with the characteristics and operating procedures of your PC and the operating system installed.

  2. Ensure the user is in the administrative or power user group of the PC to install, update, modify, or repair the WaveStar® CIT.

  3. If your PC is equipped with multiple network interface cards (NICs), know the IP address of the NIC you will be using as the WaveStar® CIT interface. If you are using DHCP with multiple NICs, you may need to temporarily remove all NICs except the one you plan to use for this interface.

  4. Operate laptop PCs on AC power during download procedures.

  5. Ensure that a laptop PC is not docked in a docking station or port replicator. Because OSI may bind to docking station NIC, you cannot install the WaveStar® CIT on a PC while it is in a docking station.

  6. Follow proper procedures in handling the CD-ROM.

  7. Read the Alcatel-Lucent 1665 Data Multiplexer (DMX) Software Release Description for the software generic being installed.

  8. Ensure that the list of supported network elements in the readme.txt file includes all the NEs and releases that you wish to manage with this release of the WaveStar® CIT.

    To access the readme.txt file, refer to the graphic in Step 2, click Documents, and then click List Contents.

Procedure

Complete the following steps to install the WaveStar® CIT software and/or network element software generic and on your PC.

 
1

With the PC not connected to the Alcatel-Lucent 1665 DMX shelf, insert the CD-ROM into the PC.

Result:

The CD autoruns and the following window opens:

View the figure

Rxx.xx.xx in the figure represents the WaveStar® CIT release number, for example R24.00.00.

If the CD-ROM does not autorun, verify that the CD is inserted properly in your CD-ROM drive.

  1. Double-click on My Computer on your desktop.

  2. Double-click on your Compact Disc icon (often identified as drive D:).

  3. Double-click on setup.exe

2

Click continue.

Result:

The following window opens:

View the figure
3

Click CIT Software.

Result:

The following window appears.

View the figure
4

Which software package so you wish to install on your computer?

If...

Then...

WaveStar® CIT software

Proceed to Procedure 14-1.1: Install WaveStar® CIT software on your PC.

NE Software

Proceed to Procedure 2-8: Apply software generic.

End of steps

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.