Chapter 9: Network configuration procedures

Overview

Purpose

This chapter includes procedures necessary to configure an Alcatel-Lucent 1665 DMX network.

Contents

Before you begin

Procedure 9-1: Establish high-speed end-to-end Alcatel-Lucent 1665 DMX network

Procedure 9-2: Add new Alcatel-Lucent 1665 DMX node to network

Procedure 9-3: Discontinue Alcatel-Lucent 1665 DMX node from network

Procedure 9-4: Provision manual ring map

Procedure 9-5: Establish low-speed 1+1 linear optical extension

Procedure 9-6: Establish single-homed network

Procedure 9-7: Establish dual-homed network

Procedure 9-8: Establish low-speed 0x1 unprotected optical extension

Procedure 9-9: Establish subtending low-speed UPSR/BLSR

Procedure 9-10: Add IP route(s) through network

Procedure 9-11: Establish low-speed 1+1 unprotected linear optical extension

Procedure 9-12: Establish DWDM network

Procedure 9-13: Establish external network-to-network interface (E-NNI)

Procedure 9-14: Establish DWDM OTU2 line