Chapter 9: Network configuration procedures

Overview

Purpose

This chapter includes procedures used to configure a Alcatel-Lucent 1850 TSS-5 SONET/SDH network.

This chapter applies only to configurations related to the VLNC50/52/55 SONET/SDH Transport, VLNC35 Fast Ethernet, and VLNC2 SYSCTL circuit packs.

For procedures related to the VLNC40/42/42B, VLNC60/61/62, and VLNC64 circuit packs, and general information about using the Command Line Interface (CLI), refer to Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide.

For procedures related to the VLNC40/42/42B, VLNC60/61/62, and VLNC64 circuit packs, and general information about using the Web-based GUI interface, refer to Alcatel-Lucent 1850 Transport Service Switch (TSS-5) CLI User Provisioning Guide.

Contents

Before you begin

Procedure 9-1: Establish Alcatel-Lucent 1850 TSS-5 SONET/SDH network

Procedure 9-2: Add Alcatel-Lucent 1850 TSS-5 node to UPSR/SNCP

Procedure 9-3: Discontinue Alcatel-Lucent 1850 TSS-5 node from UPSR/SNCP

Procedure 9-4: Add IP routes through network