System Utilities

Procedure 5-7: System Utilities

Overview

This section contains various system utility commands used in various applications such as software management, provisioning changes, and system configuration.

See equivalent CLI commands in Utility commands in the Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide.

Step

Use the following commands as required:

Procedure 5-7.1: Save All Applied Changes (write memory)
Procedure 5-7.2: System Reset (reload)
Procedure 5-7.3: Reset Configuration to Defaults (clear config)
Procedure 5-7.4: Reset Passwords to Defaults (clear pass)
Procedure 5-7.5: Download File (copy)
Procedure 5-7.6: Upload File (copy)
Procedure 5-7.7: Dual Image Configuration (boot system {image1 | image2}; update backupcode; update bootcode)
Procedure 5-7.8: Ping (ping <ipaddr>
Procedure 5-7.9: Running Configuration (show running-config)
Procedure 5-7.10: Copy Image (copy)

End of steps