Workflow to configure NAT
Stages
1 |
Configure an ISA RADIUS accounting policy that is used to configure an ISA-NAT group; see To configure an ISA RADIUS policy. |
2 |
Configure an ISA-NAT group; see To configure an ISA-NAT group. |
3 |
Configure an IPFIX export policy as required and add it to the NAT policy; see To configure an IPFIX export policy. |
4 |
Configure a NAT classifier, if required; see To configure a NAT classifier. |
5 |
Configure a NAT policy; see To configure a NAT policy. |
6 |
Configure a NAT prefix list, if required; see To configure a NAT prefix list. |
7 |
Associate a NAT policy with a subscriber profile; see To configure a subscriber profile. |
8 |
Configure NAT on a routing instance; see To configure NAT on a routing instance. |
9 |
Start or stop a NAT address-pool drain operations; see To start or stop a NAT address-pool drain operation. |
10 |
Configure a NAT deterministic script on a remote server; see To configure a NAT deterministic script on a remote server. |
11 |
Configure statistics on an ISA-NAT group; see To configure statistics on an ISA-NAT group. |
12 |
View LSN subscriber host statistics data in graphical form; see To plot LSN subscriber host statistics. |
13 |
View reserved IP address and reserved block information on ISA-NAT groups; see To view reserved IP address and reserved block information on an ISA-NAT group. |
14 |
View ISA-NAT object information such as Classic LSN Subscriber, ISA-NAT Group, or LSN block allocation; see To view ISA-NAT object information. |