configure mobile-gateway profile call-insight command descriptions

call-insight

Syntax

  • [no] call-insight

Context

  • [Tree] configure mobile-gateway profile call-insight

Description

This command enables the context to configure call trace profile parameters.

ue

Syntax

  • [no] ue profile-name

Context

  • [Tree] configure mobile-gateway profile call-insight ue

Description

This command specifies a call trace profile for the UE. The profile includes configuration to support tracing of specified events, reference point interfaces to capture control messages related to the traced UE user traffic, data volume control, output file size, time limit, and output file format.

Default

no ue

Parameters

profile-name
specifies a profile name, up to 32 characters

debug-output

Syntax

  • [no] debug-output

Context

  • [Tree] configure mobile-gateway profile call-insight ue debug-output

Description

This command sends the call trace outputs to the debug logs. The messages are available in the corresponding log file and can be viewed on the router. Viewing messages on the router simplifies troubleshooting by eliminating the need to extract pcap files from the router to view the messages.

Default

no debug-output

description

Syntax

  • description description-string
  • no description

Context

  • [Tree] configure mobile-gateway profile call-insight ue description

Description

This command associates a text string with a configuration context to help identify the content in the configuration file.

The no form of this command removes the description from the configuration.

Parameters

description-string
Specifies the description string, up to 80 characters, composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.

events

Syntax

  • [no] events {all | acctmgr | apm | bmc | dcm | dhcp | dth | slaac | ga | gal | gtp | gtpv2 | gxc | gxl | ike | lrdm | mip | msngr | pmip | rfl | rol | s6b | sctp | sd | sessmgr | sigmgr | swm | sww | sta | rpy | dpy | pfcp | nserv}

Context

  • [Tree] configure mobile-gateway profile call-insight ue events

Description

This command configures events capturing for advanced debugging capabilities. Only use events configuration if needed and as instructed by Nokia Technical Support.

Parameters

all | acctmgr | apm | bmc | dcm | dhcp | dth | slaac | ga | gal | gtp | gtpv2 | gxc | gxl | ike | lrdm | mip | msngr | pmip | rfl | rol | s6b | sctp | sd | sessmgr | sigmgr | swm | sww | sta | rpy | dpy | pfcp | nserv
specifies the events

format

Syntax

  • [no] format [pcap | simulated-pcap]

Context

  • [Tree] configure mobile-gateway profile call-insight ue format

Description

This command configures output file format.

Parameters

pcap
specifies a pcap requiring plugin
simulated-pcap
specifies a pcap without plugin
Default: simulated-pcap

live-output

Syntax

  • [no] live-output ip-address | fqdn [port port] [router router-instance]

Context

  • [Tree] configure mobile-gateway profile call-insight ue live-output

Description

This command configures where to resend each captured message/event.

Parameters

ip-address | fqdn
specifies the address
Values ipv4-address a.b.c.d (host bits must be 0)
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
fqdn 255 chars max (per label max 63)
port
specifies the port
Values: 1 to 65535
Default: 29770
router-instance
specifies the router
Values router-name base
service-id 1 to 2147483647
Default: Base

ref-point

Syntax

  • [no] ref-point {all | dhcp | ga | gn | gp | gx | gxc | l2tp | pi | radius | rf | ro | s1 | s11 | s12 | s2a | s2b | s4 | s5 | s6b | s8 | sd | swm | swu | swu-cleartext | sww | sta | dns | swu-esp-drop | sx-n4}

Context

  • [Tree] configure mobile-gateway profile call-insight ue ref-point

Description

This command configures interfaces to capture control messages related to the traced UE or for all-ues. The call trace debug commands can be used to enable tracing for the configured reference points; refer to the Call Trace Debug Commands section, in 7750 SR MG and CMG Configuration Guide.

Parameters

all | dhcp | ga | gn | gp | gx | gxc | l2tp | pi | radius | rf | ro | s1 | s11 | s12 | s2a | s2b | s4 | s5 | s6b | s8 | sd | swm | swu | swu-cleartext | sww | sta | dns | swu-esp-drop | sx-n4 | n7 | n10 | n11
specifies the reference point type
Note: L2TP capturing and swu-esp-drop parameters apply only to an all-ues profile. Capturing includes all L2TP control packets from the tunnel establish to the tunnel tear down. For ZLB, HELLO and all the messages after CDN and before ICRQ, the GW-id and UE-Id attributes are not filled in the custom header.
Default: all-ues: none | ue: all

size-limit

Syntax

  • [no] size-limit size-limit

Context

  • [Tree] configure mobile-gateway profile call-insight ue size-limit

Description

This command configures maximum data volume in output.

Parameters

size-limit
specifies the size limit in MB
Values all-ues [0..1000]; 0 means unlimited
ue [1..1000]
Default: all-ues 1000
ue: 10

time-limit

Syntax

  • [no] time-limit time-limit

Context

  • [Tree] configure mobile-gateway profile call-insight ue time-limit

Description

This command configures the maximum time limit for output.

Parameters

time-limit
specifies the size limit in seconds
Values: 0 to 604800; 0 means unlimited
Default: 86400