show mobile-gateway command descriptions
mobile-gateway
Syntax
- mobile-gateway
Context
- [Tree] show mobile-gateway
Description
The commands in this context display gateway information.
bng
Syntax
- bng
Context
- [Tree] show mobile-gateway bng
Description
The commands in this context display BNG information.
charging
Syntax
- charging
Context
- [Tree] show mobile-gateway bng charging
Description
The commands in this context display charging information.
radius
Syntax
- radius
Context
- [Tree] show mobile-gateway bng charging radius
Description
This command displays RADIUS charging information.
buffering
Syntax
- buffering
Context
- [Tree] show mobile-gateway bng charging radius buffering
Description
This command displays buffering statistics of the RADIUS charging messages.
nat
Syntax
- nat
Context
- [Tree] show mobile-gateway bng nat
Description
This command displays NAT information.
session
Syntax
- session [c-vlan tag] [s-vlan tag] [subscriber-name name] [l2-access-id string-64] [up-ip ip-address | ipv6-address] [mac ieee-address] [cid-string string-255] [cid-hex binary-cid] [rid-string string-255] [rid-hex binary-rid] [ppp-username-domain domain] [ppp-username username] [output-option] [user-access-type type] [pfcp-local-session-id hex-num] [pfcp-remote-session-id hex-num] [apn apn] [network-realm realm-name] [cp-nat-profile profile-name] [ip-prefix ip-prefix[/prefix-length]] [group group-number] [acct-session-id id] [acct-multi-session-id id] [fsg fsg-id] [address-stack stack [stack...(up to 4 max)]] [address-stack-exclude {stack} [{stack}...(up to 4 max)]]
Context
- [Tree] show mobile-gateway bng session
Description
This command displays basic information for BNG sessions. By default, this command displays all sessions up to a maximum number. The maximum number equals the number of MSCP VMs × 1024. Add any optional parameter to filter the output and only display the data of specific sets of sessions up to the same maximum number.
Parameters
- c-vlan tag
- specifies the customer VLAN (inner VLAN) filter
- s-vlan tag
- specifies the service VLAN (outer VLAN) filter
- name
- specifies the subscriber name filter, up to 255 characters
- string-64
- specifies the Layer 2 access ID filter, up to 64 characters
- ip-address | ipv6-address
- specifies the UP IP address filter
- ieee-address
- specifies the MAC address filter
- string-255
- specifies the circuit ID string filter, up to 255 characters
- binary-cid
- specifies the circuit ID binary value filter
- rid-string string-255
- specifies the remote ID string filter, up to 255 characters
- binary-rid
- specifies the remote ID binary value filter
- domain
- specifies the PPP username domain filter, up to 253 characters
- username
- specifies the PPPoE username filter, up to 253 characters
- output-option
- specifies what information to include in the output; by default, only part of the session information is displayed
- type
- specifies the user access type filter
- hex-num
- specifies the PFCP local session ID filter
- pfcp-remote-session-id hex-num
- specifies the PFCP remote session ID filter
- apn
- specifies the APN filter, up to 80 characters
- realm-name
- specifies the name of the associated network realm for the network realm filter, up to 80 characters
- profile-name
- specifies the NAT profile name filter, up to 32 characters
- ip-prefix
- specifies the IP prefix filter, that is, only display the sessions with an IP address that matches the prefix
- prefix-length
- specifies the IP prefix length
- group-number
- specifies the mobile gateway group filter
- acct-session-id id
- specifies the acct-session-id filter, up to 25 characters
- acct-multi-session-id id
- specifies the acct-multi-session-id filter, up to 25 characters
- fsg-id
- specifies the fate sharing group filter
- stack
- specifies the address stacks filter, that is, only show sessions with the specified stacks
- address-stack-exclude stack
- specifies the address stacks exclude filter, that is, exclude the sessions with the specified stacks
Output
The following output example displays all information for the filtered BNG session.
Example output information for BNG sessions
# show>mobile>bng# session mac 02:de:14:00:01:fa all
===============================================================================
BNG Sessions
===============================================================================
[IPoE] MAC : 02:de:14:00:01:fa
-------------------------------------------------------------------------------
UP Peer : 172.16.10.51 (Base)
L2 Access Id : 1/1/2
S-Vlan : 300
C-Vlan : N/A
MAC : 02:de:14:00:01:fa
Up Time : 0d 03:16:13
Circuit Id : N/A
Remote Id : N/A
Provisioned Addresses : IPv4, IPv6_PD, IPv6_NA
Signaled Addresses : IPv4
APN : mybngvrf
Network Realm : mybngvrf
IPv4 Pool : p1
IPv4 Address : 20.20.1.242
IPv4 Address Origin : Local pool
IPv4 Prefix Len : 24
IPv4 Gateway : 20.20.1.254
IPv4 Primary DNS : 0.0.0.0
IPv4 Secondary DNS : 0.0.0.0
IPv4 Primary NBNS : 0.0.0.0
IPv4 Secondary NBNS : 0.0.0.0
DHCPv4 Server IP : 20.20.1.254
DHCPv4 Lease Time : 7d 00:00:00
DHCPv4 Renew Time : 3d 12:00:00
DHCPv4 Rebind Time : 6d 03:00:00
DHCPv4 Lease End : 04/29/2021 19:53:47
DHCPv4 Remaining Lease Time : 6d 20:43:47
IPv6 Delegated Prefix : 2002:0:6:4b00::/56
IPv6 Delegated Prefix Origin : Local pool
IPv6 PD Subnet Length : 50
IPv6 PD as Framed Route : No
IPv6 Delegated Prefix Pool : p1
IPv6 NA : 2001:dead:1::6e0
IPv6 NA Origin : Local pool
IPv6 NA Subnet Length : 110
IPv6 NA Pool : p1
IPv6 Link-local : fe80::58c7:ffff:fe00:0
IPv6 Preferred Lifetime : 7d 00:00:00
IPv6 Valid Lifetime : 30d 00:00:00
IPv6 Primary DNS : ::
IPv6 Secondary DNS : ::
DHCPv6 Server DUID : (hex) 00 02 00 00 19 7f 42 4e 47 2d 53 4d 46
DHCPv6 IA_PD id : N/A
DHCPv6 IA_NA id : N/A
DHCPv6 T1 : 3d 12:00:00
DHCPv6 T2 : 5d 14:24:00
Subscriber : auto_sub_1767 (1767)
Acct-Session-Id : X00060F80C8C74843000006E7
Acct-Multi-Session-Id : Y000006E7C8C74843000006E6
State Id : 0x6081d44b000001b8
Sub Profile : base
Sla Profile : base
SAP-Template : defaultsap
Group-itf-template : defaultgrp
NAT Profile : N/A
Intermediate Destination Id : N/A
Ingress IPv4 filter override : N/A
Egress IPv4 filter override : N/A
Ingress IPv6 filter override : N/A
Egress IPv6 filter override : N/A
Number of QoS Overrides : 0
PFCP Local SE Id : 0x0000000000060f80
PFCP Remote SE Id : 0x100000000000039d
UE Id : 0x00060f80
Group/VM : 1/1
Call-Insight : disabled
Charging Profile 1 : mybngcharging
Charging enabled : Yes
-------------------------------------------------------------------------------
Charging
Acct-Session-Id : X00060F80C8C74843000006E7
Acct-Multi-Session-Id : Y000006E7C8C74843000006E6
Mode : Session level
Charging Profile 1 : mybngcharging
Charging enabled : Yes
Operational interim interval : N/A
Charging Profile 2 : N/A
Charging enabled : No
Operational interim interval : N/A
Charging Profile 3 : N/A
Charging enabled : No
Operational interim interval : N/A
Charging Profile 4 : N/A
Charging enabled : No
Operational interim interval : N/A
Charging Profile 5 : N/A
Charging enabled : No
Operational interim interval : N/A
Radius user name : N/A
Radius class 1 : N/A
CP Total Volume Limit : Disabled
CP UP Volume Limit : Disabled
CP DOWN Volume Limit : Disabled
-------------------------------------------------------------------------------
IBCP
IBCP Local MAC : ea:ac:33:01:02:44
IBCP Local IP : 45.45.45.45 (Base)
IBCP Remote IP : 172.16.10.51 (Base)
IBCP Local TE Id : 0x40060f81
IBCP Remote TE Id : 0x801200e7
IBCP DSCP : 56
IBCP TTL : 255
-------------------------------------------------------------------------------
Number of sessions shown : 1
===============================================================================charging
Syntax
- charging
Context
- [Tree] show mobile-gateway bng session charging
Description
This command shows the charging information for the BNG sessions.
aggregate-stats
Syntax
- aggregate-stats [fetch-upf]
Context
- [Tree] show mobile-gateway bng session charging aggregate-stats
Description
This command displays the aggregate charging statistics for BNG sessions.
Note: To prevent heavy load between the BNG CPF and the BNG
UPF when the fetch-upf parameter is used, this command is
only available in combination with the acct-session-id
parameter for the session command.
Parameters
- fetch-upf
- specifies to fetch the latest statistics from the BNG UPF
detailed-stats
Syntax
- detailed-stats [fetch-upf]
Context
- [Tree] show mobile-gateway bng session charging detailed-stats
Description
This command displays detailed charging statistics for BNG sessions.
Note: To prevent heavy load between the BNG CPF and the BNG
UPF when the fetch-upf parameter is used, this command is
only available in combination with the acct-session-id
parameter for the session command.
Parameters
- fetch-upf
- specifies to fetch the latest statistics from the BNG UPF
Output
The following output example shows detailed statistics for the filtered BNG session.
Example output detailed statistics for BNG sessions
# show mobile-gateway bng session acct-session-
id X00011140F00EE5FD0000000A charging detailed-stats
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Ingress queue: 1
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Offered high priority 0 0
Offered low priority 39 25350
Dropped high priority 0 0
Dropped low priority 0 0
Forwarded in profile 0 0
Forwarded out of profile 39 25350
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Ingress queue: 2
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Offered high priority 0 0
Offered low priority 39 29250
Dropped high priority 0 0
Dropped low priority 0 0
Forwarded in profile 0 0
Forwarded out of profile 39 29250
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Ingress queue: 3
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Offered high priority 0 0
Offered low priority 39 9750
Dropped high priority 0 0
Dropped low priority 0 0
Forwarded in profile 0 0
Forwarded out of profile 39 9750
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Ingress queue: 4
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Offered high priority 0 0
Offered low priority 39 33150
Dropped high priority 0 0
Dropped low priority 0 0
Forwarded in profile 0 0
Forwarded out of profile 39 33150
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Ingress queue: 5
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Offered high priority 0 0
Offered low priority 39 17550
Dropped high priority 0 0
Dropped low priority 0 0
Forwarded in profile 0 0
Forwarded out of profile 39 17550
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Ingress queue: 6
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Offered high priority 0 0
Offered low priority 39 21450
Dropped high priority 0 0
Dropped low priority 0 0
Forwarded in profile 0 0
Forwarded out of profile 39 21450
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Ingress queue: 7
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Offered high priority 0 0
Offered low priority 39 5850
Dropped high priority 0 0
Dropped low priority 0 0
Forwarded in profile 0 0
Forwarded out of profile 39 5850
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Ingress queue: 8
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Offered high priority 0 0
Offered low priority 39 13650
Dropped high priority 0 0
Dropped low priority 0 0
Forwarded in profile 0 0
Forwarded out of profile 39 13650
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Egress queue: 1
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Dropped in profile 0 0
Dropped out of profile 0 0
Forwarded in profile 0 0
Forwarded out of profile 42 29736
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Egress queue: 2
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Dropped in profile 0 0
Dropped out of profile 0 0
Forwarded in profile 0 0
Forwarded out of profile 42 33936
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Egress queue: 3
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Dropped in profile 0 0
Dropped out of profile 0 0
Forwarded in profile 0 0
Forwarded out of profile 42 12936
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Egress queue: 4
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Dropped in profile 0 0
Dropped out of profile 0 0
Forwarded in profile 0 0
Forwarded out of profile 42 38136
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Egress queue: 5
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Dropped in profile 0 0
Dropped out of profile 0 0
Forwarded in profile 0 0
Forwarded out of profile 42 21336
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Egress queue: 6
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Dropped in profile 0 0
Dropped out of profile 0 0
Forwarded in profile 0 0
Forwarded out of profile 42 25536
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Egress queue: 7
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Dropped in profile 0 0
Dropped out of profile 0 0
Forwarded in profile 0 0
Forwarded out of profile 42 8736
===============================================================================
===============================================================================
BNG session detailed statistics
===============================================================================
Packets Octets
-------------------------------------------------------------------------------
PPP User Name: u10083
Egress queue: 8
Time: 04/27/2021 19:48:48
-------------------------------------------------------------------------------
Dropped in profile 0 0
Dropped out of profile 0 0
Forwarded in profile 0 0
Forwarded out of profile 42 17136
===============================================================================nat
Syntax
- nat
Context
- [Tree] show mobile-gateway bng session nat
Description
This command displays the information about the NAT pool of the CP NAT profile and the outside routing context for BNG sessions.
Output
The following output example shows the NAT information for the BNG sessions.
Example output NAT pool information for BNG sessions
# show mobile-gateway bng session nat
===============================================================================
BNG Sessions NAT
===============================================================================
[IPoE] MAC : 00:ff:07:00:00:02
-------------------------------------------------------------------------------
UP NAT policy : policy_l2a_1_2
Outside network realm : 11
Outside IP address : 116.0.0.6
Outside ports : 1024-5119
===============================================================================port-forwarding-entries
Syntax
- port-forwarding-entries
Context
- [Tree] show mobile-gateway bng session nat port-forwarding-entries
Description
No description found
summary
Syntax
- summary
Context
- [Tree] show mobile-gateway bng session summary
Description
No description found
session-lockout
Syntax
- session-lockout [c-vlan tag] [s-vlan tag] [l2-access-id string-64] [up-ip ip-address | ipv6-address] [mac ieee-address] [cid-string string-255] [cid-hex binary-cid] [rid-string string-255] [rid-hex binary-rid] [user-access-type type] [state lockout-state]
- session-lockout count
Context
- [Tree] show mobile-gateway bng session-lockout
Description
This command displays information for sessions that are subject to session lockout monitoring. Add any optional parameter to filter the output and only display the data of specific sets of sessions.
Note: The maximum number of sessions that are displayed in the
output is limited. The last line of the output shows the number of displayed
sessions. Use the count keyword to get the number of all matching
sessions.
Parameters
- tag
- specifies the customer VLAN (inner VLAN) filter
- s-vlan tag
- specifies the service VLAN (outer VLAN) filter
- string-64
- specifies the Layer 2 access ID filter, up to 64 characters
- ip-address | ipv6-address
- specifies the UP IP address filter
- ieee-address
- specifies the MAC address filter
- string-255
- specifies the circuit ID string filter, up to 255 characters
- binary-cid
- specifies the circuit ID binary value filter
- rid-string string-255
- specifies the remote ID string filter, up to 255 characters
- rid-hex binary-rid
- specifies the remote ID binary value filter
- type
- specifies the user access type filter
- lockout-state
- specifies the session lockout state filter
- count
- specifies to display only the number of sessions per lockout state, no other data
Output
The following output example shows BNG session lockout information.
Example output BNG session lockout information
# show mobile-gateway bng session-lockout
===============================================================================
BNG session lockout information
===============================================================================
[PPPoE] Session Id : 0
-------------------------------------------------------------------------------
UP Peer : 172.16.10.51 (Base)
L2 Access Id : 1/1/2
S-Vlan : 300
C-Vlan : N/A
MAC : 02:de:14:00:01:11
Circuit Id : N/A
Remote Id : N/A
State : locked-out
block time left (s) : 594 of 600
Attempts failed : 3 (allowed 3)
===============================================================================
#show mobile-gateway bng session-lockout count
===============================================================================
BNG session lockout information
===============================================================================
Sessions locked-out : 1
Sessions monitored : 0
===============================================================================subscriber
Syntax
- subscriber [name subscriber-name] [id subscriber-id] [count] [acct-session-id id] [fsg fsg-id] [l2-access-id string-64] [up-id ip-address | ipv6-address] [apn apn] [group group-number] [network-realm realm-name] [summary]
Context
- [Tree] show mobile-gateway bng subscriber
Description
This command displays BNG subscriber information. By default, this command displays all subscribers up to a maximum number. The maximum number equals the number of MSCP VMs × 1024. Add any optional parameter to filter the output and only display the data of specific sets of subscribers up to the same maximum number.
Parameters
- subscriber-name
- specifies the subscriber name filter, up to 255 characters
- subscriber-id
- specifies the subscriber ID filter
- count
- specifies to display only the number of subscribers, no other data
- id
- specifies the acct-session-id filter, up to 25 characters
- fsg-id
- specifies the fate sharing group filter
- string-64
- specifies the Layer 2 access ID filter, up to 64 characters
- ip-address | ipv6-address
- specifies the UP IP address filter
- apn
- specifies the APN filter, up to 80 characters
- group-number
- specifies the mobile gateway group filter, up to 255 characters
- realm-name
- specifies the name of the associated network realm for the network realm filter, up to 80 characters
- summary
- specifies to display a summary of the subscriber information
Output
The following output example shows the subscriber information for the BNG sessions.
Example output subscriber information for BNG sessions
# show mobile-gateway bng subscriber id 2557
===============================================================================
Subscribers
===============================================================================
Name : auto_sub_2557
-------------------------------------------------------------------------------
Id : 2557
Num Sessions : 1
Group/VM : 1/1
UP Peer : 172.16.10.51
Acct-Session-Id: Y000009FDC8C74843000009FC
L2 Access Id : 1/1/2
FSG : 0
Sub Profile : base
Inter-Dest-Id : N/A
-------------------------------------------------------------------------------
Number of subscribers shown : 1
===============================================================================wpp
statistics
Syntax
- statistics portal name
- statistics portal-group name
Context
- [Tree] show mobile-gateway bng wpp statistics
Description
This command displays the statistics of the specified WPP portal or portal group.
Parameters
- portal name
- specifies the WPP portal name
- portal-group name
- specifies the WPP portal group name
Output
The following output example shows the statistics information for the specified WPP portal.
Example output statistics information for a WPP portal
show mobile-gateway bng wpp statistics portal "p1"
===============================================================================
WPP Portal "p1"
===============================================================================
-------------------------------------------------------------------------------
Rx-Type rx accept drop
-------------------------------------------------------------------------------
Req-challenge 0 0 0
Ack-challenge 0 - 0
Req-auth 0 0 0
Ack-auth 0 - 0
Req-logout 0 0 0
Disconnect 0 0 0
Timeout 0 0 0
Ack-logout 0 0 0
Aff-ack-auth 0 0 0
Ntf-logout 0 - 0
Req-info 0 0 0
Ack-info 0 - 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Tx-Type tx re-tx
-------------------------------------------------------------------------------
Ack-challenge 0 -
Success 0 -
Reject 0 -
Already-Established 0 -
Authentication-Pending 0 -
Fail 0 -
Ack-auth 0 0
Success 0 0
Reject 0 -
Already-Established 0 -
Authentication-Pending 0 -
Fail 0 -
Ack-logout 0 -
Success 0 -
Reject 0 -
Fail 0 -
Ntf-logout 0 0
Ack-info 0 -
Success 0 -
Unsupported 0 -
Fail 0 -
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Error events count
-------------------------------------------------------------------------------
Unknown msg type 0
Unexpected msg type 0
Unexpected error code 0
Unknown protocol version 0
Unexpected protocol version 0
Duplicated attribute 0
Unknown attribute 0
Unsupported attribute 0
Conflicting attribute 0
Unknown authentication type 0
Missing username 0
Missing password 0
Invalid Req-Id 0
Invalid Serial-No 0
Invalid authenticator 0
Unassigned portal group 0
Unavailable challenge 0
Incompatible SBM state 0
Unknown host 0
-------------------------------------------------------------------------------
===============================================================================call-insight
Syntax
- call-insight
Context
- [Tree] show mobile-gateway call-insight
Description
No description found
bng
Syntax
- bng [mac-address mac] [remote-id rem] [circuit-id circ] [up up-node-id] [l2-access-id l2-acc] [l2-circuit-id l2-circ] [detail]
Context
- [Tree] show mobile-gateway call-insight bng
Description
This command displays Call Trace information for specific BNG sessions.
Parameters
- mac
- specifies the MAC address of the BNG session
Values: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx
- rem
- specifies the remote ID of the BNG session, up to 255 characters; the wildcard (*) character can be used only at the start or the end
- circ
- specifies the circuit ID of the BNG session, up to 255 characters; the wildcard (*) character can be used only at the start or the end
- up-node-id
- specifies the UP node ID of the UPF where the session is active
Values ipv4-address a.b.c.d ipv6-address x:x:x:x:x:x:x:x x:x:x:x:x:x:d.d.d.d x - [0..FFFF]H d - [0..255]D fqdn up to 255 characters (per label max 63); the wildcard (*) character can be used only at the start or the end - l2-acc
- specifies the layer 2 access ID where the session is active, up to 50 characters; the wildcard (*) character can be used only at the start or the end
- l2-circ
- specifies the layer 2 circuit ID where the session is active, up to 50 characters; the wildcard (*) character can be used only at the start or the end
- detail
- keyword to display detailed Call Trace informationNote: When using the wildcard (*) character in parameter values of the show command, the following apply:
- the parameter values of the show command that use the wildcard (*) character must match the corresponding values when the debug command was issued. For example, if a debug command is issued with a value of 1/1/2* for the l2-circuit-id parameter, the same value must be set in the show command. Setting, for example, 1/1/* as the parameter value, returns no results in the output.
- if no wildcard (*) character is used in a parameter value of the debug command, none can be used in the corresponding value of the show command. For example, if a debug command is issued with a value of remote_id_83 for the remote-id parameter, the same value must be set in the show command. Setting, for example, remote_id_* as the parameter value, returns no results in the output.
Output
The following output examples show call insight information for specific BNG sessions, without and with the detail keyword:
Example output call trace BNG
# show mobile-gateway call-insight bng mac-address 00:11:22:33:44:55
===============================================================================
Call-insight BNG
===============================================================================
Match Value Status Msgs
-------------------------------------------------------------------------------
mac-address 00:11:22:33:44:55 running 0
-------------------------------------------------------------------------------
Number of call-insight debug jobs: 1
===============================================================================Example output call trace BNG detailed call trace information
# show mobile-gateway call-insight bng mac-address 00:11:22:33:44:55 detail
===============================================================================
Call-insight BNG detail
===============================================================================
MAC address : 00:11:22:33:44:55 Status : running
Circuit Id : -- Profile : default
Remote Id : -- Capture format: simulated-p*
UP Node Id : -- Time limit : 86400s
L2 Access Id : -- Data limit : 10MB
L2 Circuit : -- Session limit : --
Nr. of captured msgs : 0
|--control-plane msgs: 0
|--user-plane msgs : 0
|--events : 0
Size of captured msgs: 0B
Started : JUN 29 2021, 12:36:07 UTC
Ref-points : dhcp,dns,ga,gn,gp,gx,gxc,pi,radius,rf,ro,s1,s11,s12,s2a
,s2b,s4,s5,s6b,s8,sd,swm,swu,swu-cleartext,sww,sta,sx-
n4
SBA-services : all
User-traffic : none
Events : none
Mask-name : N/A
Live output : N/A
Output file base : N/A
-------------------------------------------------------------------------------
Number of call-insight debug jobs: 1
Nr. of dropped user-plane packets: 0
-------------------------------------------------------------------------------
Note:Reference points field above is applicable only to control-plane messages.
===============================================================================
* indicates that the corresponding row element may have been truncated.files
Syntax
- files [long]
- files finished [long]
- files running [long]
Context
- [Tree] show mobile-gateway call-insight files
Description
This command displays Call Trace information for UEs, all UEs and masked UEs.
Parameters
- long
- keyword to display long list format
- finished
- keyword to display completed Call Trace files
- running
- keyword to display active Call Trace files
Output
The following output examples show Call Trace file information.
Example output call trace files statistics
# show mobile-gateway call-insight files
===============================================================================
Call trace files of running jobs
===============================================================================
File path Size
-------------------------------------------------------------------------------
cf1-A:/calltrace/running/imsi_123456789012300_m_150327_1313.pcap 4194
cf1-A:/calltrace/running/imsi_223456789012300_m_150327_1313.pcap 4194
cf1-A:/calltrace/running/imsi_323456789012300_m_150327_1313.pcap 4194
===============================================================================
===============================================================================
Call trace files of finished jobs
===============================================================================
File path Size
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
Call trace files storage limits for active CPM
===============================================================================
cf1-A available space : 304 MB cf1-A volume limit : 1000 MB
Available file count : 197 Maximal file count : 200
===============================================================================ue
Syntax
- ue [[detail] | [imei imei [detail]] | [imsi imsi [detail]] | [mask-name mask-name [detail]] | [msisdn msisdn [detail]]
Context
- [Tree] show mobile-gateway call-insight ue
Description
This command displays Call Trace information for the specified UE type.
Parameters
- detail
- Keyword to display detailed call trace information.
- imei
- Specifies an IMEI identification string, up to 16 characters.
- imsi
- Specifies an IMSI identification string, up to 15 characters.
- mask-name
- Specifies a mask name, up to 16 characters.
- msisdn
- Specifies an MSISDN identification string, up to 15 characters.
Output
The following output examples show Call Trace UE information.
- Example output call trace UE statistics
- Example output call trace UE detail statistics
- Example output call trace UE IMSI detail statistics
Example output call trace UE statistics
# show mobile-gateway call-insight ue
================================================================
Call-insight UEs
================================================================
Match Value Mask-name Status Msgs
----------------------------------------------------------------
imsi 222222222222223 N/A running 0
msisdn 17962480143 N/A running 0
imei 505024101215080 N/A running 0
imsi 222222222222221 N/A running 0
----------------------------------------------------------------
Number of call-insight debug jobs: 4
================================================================Example output call trace UE detail statistics
# show mobile-gateway call-insight ue detail
==========================================================================
Call-insight UE detail
==========================================================================
IMSI : 13456789012345 Status : running
IMEI : -- Match type : imsi
MSISDN : -- Capture format: simulated-p*
MAC address : -- Time limit : 86400s
Nr. of captured msgs : 128 Data limit : 10MB
|--control-plane msgs: 48
|--user-plane msgs : 80
|--events : 0
Size of captured msgs: 31770B
Started : FEB 15 2018, 18:53:41 UTC
Ref-points : all
User-traffic : all
Events : none
Mask-name : N/A
Live output : N/A
Output file base : imsi_13456789012345_180215_1853
Detailed user-plane debug statistics
|--VMId:1 LB-VM ingress Uplink pakets: 40 size: 9440 B
|--VMId:1 LB-VM ingress Downlink pakets: 40 size: 9440 B
|--VMId:1 LB-VM egress Uplink pakets: 40 size: 9440 B
|--VMId:1 LB-VM egress Downlink pakets: 40 size: 9440 B
|--VMId:3 MG-VM - Uplink pakets: 30 size: 6000 B
|--VMId:3 MG-VM - Downlink pakets: 30 size: 6000 B
|--VMId:4 MG-VM - Uplink pakets: 10 size: 2000 B
|--VMId:4 MG-VM - Downlink pakets: 10 size: 2000 B
-------------------------------------------------------------------------------
Number of call-insight debug jobs: 1
Nr. of dropped user-plane packets: 0
--------------------------------------------------------------------------
Note:Reference points field above is applicable only to control-plane messages.
==========================================================================Example output call trace UE IMSI detail statistics
# show mobile-gateway call-insight ue imsi 310012001000001 detail
===============================================================================
Call-insight UE detail
===============================================================================
IMSI : 310012001000001 Status : running
IMEI : -- Match type : imsi
MSISDN : -- Capture format: simulated-p*
MAC address : -- Time limit : 86400s
Nr. of captured msgs : 21 Data limit : 10MB
|--control-plane msgs: 21
|--user-plane msgs : 0
|--events : 0
Size of captured msgs: 10407B
Started : SEP 08 2017, 11:05:37 UTC
Ref-points : all
User-traffic : enabled
Events : none
Mask-name : N/A
Live output addr/port: 10.10.7.10/50001
Live output router : Base
Output file base : N/A
-------------------------------------------------------------------------------
Number of call-insight debug jobs: 1
Nr. of dropped user-plane packets: 0
-------------------------------------------------------------------------------
Note:Reference points field above is applicable only to control-plane messages.
===============================================================================
* indicates that the corresponding row element may have been truncated.ue-mask
Syntax
- ue-mask [name name]
Context
- [Tree] show mobile-gateway call-insight ue-mask
Description
This command displays Call Trace information for masked UEs.
Parameters
- name
- specifies a string, up to 16 characters
Output
The following output example shows UE mask Call Trace information.
Example output call trace UE mask statistics
# show mobile-gateway call-insight ue-mask
===============================================================================
Call-insight UE-mask
===============================================================================
Mask-name Mask (Type/Value) UEs-active Max-UEs UEs-finished
-------------------------------------------------------------------------------
default imsi/123* 0 50 0
default imsi/223.5.7* 0 50 0
myMask imei/323.5.7* 0 5 0
-------------------------------------------------------------------------------
Number of call-insight masks: 3
===============================================================================connections
mg-vm
Syntax
- mg-vm
Context
- [Tree] show mobile-gateway mg-vm
Description
This command displays information about the SM-VM.
cpu
Syntax
- cpu [vm vm-id] [vm-function vm-function-number] [repeat repeat-number]
Context
- [Tree] show mobile-gateway mg-vm cpu
Description
This command displays the CPU utilization of SM-VMs.
Parameters
- vm-id
- Specifies the VM number.
- vm-function-number
- Specifies the SM-VM function number.
- repeat-number
- Specifies the sample period, the number of times to repeat the sampling.
Output
The following output examples show CPU utilization information for SM-VMs and Show SM-VM CPU utilization fields describes the output fields.
- Example output SM-VM CPU utilization summary statistics
- Example output SM-VM CPU utilization statistics for a specified SM-VM
Example output SM-VM CPU utilization summary statistics
# show mobile-gateway mg-vm cpu
================================================
CPU utilization starting at 09/14/2018 21:53:33
================================================
ISM-MG Summary
================================================
VM VMF Group gw-id cpu utilization
------------------------------------------------
3 1 1 1 5.72%
4 1 1 1 1.85%
================================================Example output SM-VM CPU utilization statistics for a specified SM-VM
# show mobile-gateway mg-vm cpu vm 3
================================================
CPU utilization starting at 09/14/2018 21:54:08
================================================
ISM-MG VM 3 VMF 1
================================================
Name VM Usage
------------------------------------------------
AMS 0.01%
DHCP ~ 0.00%
GA ~ 0.00%
GX 0.01%
GY 0.02%
HA 0.07%
PFCP 0.02%
RADIUS 0.02%
RF 0.02%
S6B 0.03%
SESSMGR 0.03%
SIG 0.05%
SYSTEM 3.88%
TRACE 0.02%
RPY 0.01%
SWM ~ 0.00%
LDNSC ~ 0.00%
SD 0.01%
SDLB ~ 0.00%
STA ~ 0.00%
CDBMGR 0.09%
<NULL> ~ 0.00%
HTTP ~ 0.00%
----------------------------------------------------
Total In Use: 4.27%
Idle: 95.73%
================================================| Label | Description |
|---|---|
| VM | SM-VM number |
| VMF | SM-VM function number |
| Group | Group number |
| GW-ID | Gateway ID (1 to 8) |
| CPU utilization | Percentage of CPU utilization per SM-VM number |
| Name | Protocol or interface name |
| CPU usage | Percentage of CPU usage per interface |
memory-pools
Syntax
- memory-pools [vm vm-id] [vm-function vm-function-number] [repeat repeat-number]
Context
- [Tree] show mobile-gateway mg-vm memory-pools
Description
This command displays the memory utilization of SM-VMs.
Parameters
- vm-id
- Specifies the VM number.
- vm-function-number
- Specifies the SM-VM function number.
- repeat-number
- Specifies the sample period, the number of times to repeat the sampling.
Output
The following output examples show memory utilization information for SM-VMs and Show SM-VM memory utilization fields describes the output fields
Example output SM-VM memory statistics
# show mobile-gateway mg-vm memory-pools
===================================================================================
MEM utilization starting at 09/20/2018 20:45:32
===================================================================================
ISM-MG Summary
===================================================================================
VM |VMF |Group|gw-id| Current Size| In Use|Avail Virt Mem|Avail Phys Mem
-----+-----+-----+-----+--------------+--------------+--------------+--------------
3 |1 |1 |1 | 9,289,334,784| 8,900,651,816| 6,677,331,968| 6,677,331,968
4 |1 |1 |1 | 9,242,148,864| 8,862,652,080| 6,811,549,696| 6,811,549,696
===================================================================================Example output SM-VM memory statistics for a specified SM-VM
# show mobile-gateway mg-vm memory-pools vm 3
=========================================================
MEM utilization starting at 09/20/2018 00:03:30
=========================================================
ISM-MG VM 3 VMF 1
=========================================================
Name | Current Size| In Use
---------------------------+--------------+--------------
AMS | 1,048,576| 158,264
DHCP | 9,437,184| 5,566,256
GA | 2,097,152| 755,928
GX | 8,388,608| 6,203,808
GY | 6,291,456| 2,972,640
HA | 9,437,184| 1,816,176
PFCP | 9,437,184| 2,748,104
RADIUS | 13,631,488| 3,336,288
RF | 77,594,624| 68,117,896
S6B | 39,845,888| 34,266,368
SESSMGR | 136,314,880| 82,402,904
SIG | 68,157,440| 46,028,992
SYSTEM | 2,164,260,864| 2,017,004,704
TRACE | 28,311,552| 21,164,912
RPY | 7,340,032| 3,420,904
SWM | 7,340,032| 3,415,472
LDNSC | 2,097,152| 47,560
SD | 7,340,032| 4,600,416
SDLB | 0| 0
STA | 5,242,880| 2,354,608
CDBMGR | 0| 0
<NULL> | 0| 0
HTTP | 0| 0
---------------------------+--------------+--------------
Total: 2,603,614,208 2,306,382,200
=========================================================
available virtual memory: 5,133,828,096
available physical memory: 5,133,828,096
=========================================================| Label | Description |
|---|---|
| VM | SM-VM number |
| VMF | SM-VM function number |
| Group | Group number |
| GW-ID | Gateway ID (1 to 8) |
| Current size | Total available memory size (per VM/VM function or interface) |
| In use | Total memory that is allocated (per VM/VM function or interface) |
| Avail Virt Mem | Total available virtual memory (per VM/VM function) |
| Avail Phys Mem | Total available physical memory (per VM/VM function) |
| Name | Protocol or interface name |
pdn
Syntax
- pdn
Context
- [Tree] show mobile-gateway pdn
Description
This command enables the context to display configured PDN gateway profiles.
apn
Syntax
- apn apn-name statistics [group group-number]
- apn apn-name delete-session-statistics [gateway gw-id | group group-number] [summary]
- apn apn-name attach-failure-statistics [gateway gw-id | group group-number] [summary]
- apn apn-name dns-redirect-statistics [gateway gw-id | group group-number] [summary]
- apn apn-name fqdn-group name
- apn apn-name gy-ap-statistics
- apn apn-name [detail]
- apn apn-name apn-override-statistics [gateway gw-id | group group-number] [summary]
- apn apn-name pcscf-statistics
- apn apn-name gx-ap-statistics
- apn apn-name call-flow-stats [gateway gw-id | group group-number] [summary]
- apn apn-name l2tp
- apn apn-name transport-statistics [imsi imsi | msisdn msisdn]
Context
- [Tree] show mobile-gateway pdn apn
Description
This command displays APN information, including statistics on the types of PDN sessions by access protocol and PDN type. APN statistics are tracked for real and virtual PDN connections. The virtual APN capability allows the PGW to change the APN from the one received via GTP-C (the "real" APN) to one that is used locally (the "virtual" APN). However a PDN session only counts statistics for the virtual APN to which it has been mapped. Furthermore an APN may be real for some PDN sessions and virtual for other PDNs. To track the usage of real APNs even though they are being mapped to a smaller set of virtual APNs, the PGW keeps statistics for the number of PDN connections that use the APN as a real APN. All other counters in the output are incremented only for those PDNs that use the APN as a virtual APN.
Parameters
- apn-name
- specifies the APN name
- statistics
- specifies aggregated statistics
- summary
- specifies summarized aggregated statistics
- group-number
- specifies the group number
- delete-session-statistics
- specifies delete session statistics
- gw-id
- specifies the gateway identifier number
- attach-failure-statistics
- specifies attach failure statistics
- dns-redirect-statistics
- specifies DNS redirect statistics
- fqdn-group
- specifies resolved IP addresses and expiry information
- gy-ap-statistics
- specifies Gy AP statistics
- gx-ap-statistics
- specifies Gx Assume Positive (AP) statistics
- call-flow-stats
- specifies the call flow statistics per APN
- group-number
- specifies the group number
- gw-id
- specifies the gateway identifier number
- summary
- specifies summarized aggregated statistics
- detail
- specifies detailed APN configuration
- pcscf-statistics
- specifies P-CSCF statistics
- override-statistics
- specifies APN override statistics
- l2tp
- specifies L2TP statistics
- transport-statistics
- specifies transport-byte-collection statistics per APN
- imsi
- specifies the IMSI, up to 15 digits
- msisdn
- specifies the MSISDN, up to 15 digits
bng
fsg
Syntax
- fsg
- fsg fsg-id [detail]
Context
- [Tree] show mobile-gateway pdn bng fsg
Description
This command, when run without parameters, displays a high-level overview of the provisioned FSGs.
With parameters, this command displays the UP group and the current
active/standby BNG-UPs for the specified FSG. The following are examples to get a specific FSG
ID:
- from a command in the following
context:
show mobile-gateway bng session - from a BNG-UP-specific operational command
Parameters
- fsg-id
- Specifies the FSG.
- detail
- Keyword to display the detailed output, such as advanced UP group configuration parameters.
Output
The following example shows detailed output for a specific FSG.
Detailed output for a specific FSG
A:BNG-CPF>show>mobile-gateway>pdn>bng# fsg 4 detail
===============================================================================
FSG 4
===============================================================================
UP Group
PDN gateway : 1
Description : (Not Specified)
FSG Profile : basic
UP FSG Template : N/A
Default Standby Type : hot
Active UP : b.upf
Changing : no
Preferred : yes
Drain : no
Health : 255
S-Vlan Range : N/A
C-Vlan Range : N/A
L2-Access-Id Health :
to-access : 255
Network Realm Health :
Standby UP : c.upf
Ready : yes
Preferred : no
Drain : no
Health : 255
S-Vlan Range : N/A
C-Vlan Range : N/A
L2-Access-Id Health :
to-access : 255
Network Realm Health :
No. Of Sessions : 2
Current Hold-Off Delay : 0 msec
===============================================================================
up
Syntax
- up [ip-addr | fqdn] [up-group group-name]
Context
- [Tree] show mobile-gateway pdn bng up
Description
This command, when run without parameters, displays an overview of all BNG-UPs and their UP group participation. The applicable Layer 2 access ID, the applicable VLAN range, and the active/standby state for the BNG-UP in the UP group are displayed. The optional parameters filter the output to display only the UP group participation for the specific BNG-UP or only the participation of the BNG-UPs in the specified UP group.
Parameters
- ip-addr
- Specifies the IP address of the PFCP node ID for the BNG-UP filter.
- fqdn
- Specifies the fully qualified domain name of the PFCP node ID for the BNG-UP filter, up to 255 characters.
- group-name
- Specifies the UP group name for the UP group filter, up to 32 characters.
Output
The following example displays an overview of all BNG-UPs and their UP group participation.
Participation of the BNG-UPs in the UP groups
A:BNG-CPF>show>mobile-gateway>pdn>bng# up
===============================================================================
Up Table
===============================================================================
Gw UpId
L2-Access-Id S-Vlan C-Vlan Up-Group Fsg Role
-------------------------------------------------------------------------------
1 b.upf (192.0.2.11)
to-access alpha 4 Act
-------------------------------------------------------------------------------
1 c.upf (192.0.2.12)
to-access alpha 4 Std
-------------------------------------------------------------------------------
1 east (192.0.2.13)
to-access beta 5 Std
-------------------------------------------------------------------------------
1 west (192.0.2.14)
to-access beta 5 Act
-------------------------------------------------------------------------------
No. of UPs : 4
===============================================================================
up-group
Syntax
- up-group
- up-group group-name [up ip-addr | fqdn] [detail]
Context
- [Tree] show mobile-gateway pdn bng up-group
Description
This command, when run without parameters, displays a high-level overview of the provisioned UP groups.
With parameters, this command displays an overview of the specified UP group, the associated list of FSGs, and the associated BNG-UPs.
Parameters
- group-name
- Specifies the UP group name, up to 32 characters.
- up
- Keyword to filter the output to only contain information relevant to the specified UP, identified by the provisioned PFCP node ID.
- ip-addr
- Specifies the UP IP address filter.
- fqdn
- Specifies the UP fully qualified domain name filter, up to 255 characters.
- detail
- Keyword to display detailed output.
Output
The following output examples show UP group information.
High-level UP groups information
A:BNG-CPF>show>mobile-gateway>pdn>bng# up-group
===============================================================================
Up-Group Table
===============================================================================
Gw Up-Group Admin No. Of No. Of
State Sessions UPs
-------------------------------------------------------------------------------
1 alpha up 2 2
1 beta up 5 2
-------------------------------------------------------------------------------
No. of Sessions : 7
-------------------------------------------------------------------------------
No. of Up-Groups : 2
Detailed output for a specific UP group
A:BNG-CPF>show>mobile-gateway>pdn>bng# up-group "alphas" detail
===============================================================================
Up-Group ‘alpha'
===============================================================================
PDN gateway : 1
Description : (Not Specified)
Admin State : up
FSG Profile : basic
UP FSG Template : N/A
Gateway MAC Prefix : 02:00:5e:00
Default Standby Type : hot
Active Change Without Failure : always
Recovery Event Hold Off Delay : 5000 msec
Degradation Event Hold Off Delay : 0 msec
Health Aggregation Mode : lowest
Minimum Active Health : 1
Health Calculate Include : L2-Access-Id
-------------------------------------------------------------------------------
FSG Active UP Standby UP Sessions Hold-Off
-------------------------------------------------------------------------------
4 b.upf c.upf (ready) 2 0
-------------------------------------------------------------------------------
No. of FSGs: 1
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
UP b.upf (192.0.2.11)
-------------------------------------------------------------------------------
FSG Role : Active
Preferred : yes
Drain : no
S-Vlan Range : N/A
C-Vlan Range : N/A
Health : 255
L2-Access-Id Health :
to-access : 255
Network Realm Health :
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
UP c.upf (192.0.2.12)
-------------------------------------------------------------------------------
FSG Role : Standby
Preferred : no
Drain : no
S-Vlan Range : N/A
C-Vlan Range : N/A
Health : 255
L2-Access-Id Health :
to-access : 255
Network Realm Health :
-------------------------------------------------------------------------------
No of UPs : 2
===============================================================================
call-flow-stats
Syntax
- call-flow-stats [gateway gw-id | group group-number | vm vm-id] [gw-type sgw | pgw | upf | smf] [summary] [suppress-zero]
- call-flow-stats oi-override-mapping [gateway gw-id] [plmn-mcc mcc-value plmn-mnc mnc-value]
Context
- [Tree] show mobile-gateway pdn call-flow-stats
Description
This command displays call flow statistics for each card.
When displaying Operator Identifier (OI) mapping statistics, it shows the number of sessions established (initial and handover) as a summary per gateway ID, OI override mapping list, or per subscriber PLMN entry that the ePDG used OI or serving network PLMN replacement from the OI override mapping table.
Parameters
- gw-id
- specifies the gateway ID
- group-number
- specifies the group number
- vm-id
- specifies the VM ID
- summary
- displays summarized information.
- mcc-value
- specifies an MCC value
- mnc value
- specifies an MNC value
- gw-type
- specifies the gateway type
clear-status
Syntax
- clear-status [gateway gw-id]
Context
- [Tree] show mobile-gateway pdn clear-status
Description
This command shows the status of the last administrative clear command. The user can monitor an ongoing clear command using this output.
Parameters
- gw-id
- specifies the gateway ID
path-mgmt-stats
Syntax
- path-mgmt-stats ref-point-type peer ip-address [port port-number]] [gateway gw-id | group group-number | vm vm-id] [instance | aggregate]
- path-mgmt-stats {gn | gnu | gp | gpu} [ref-point ref-point-name] [peer ip-address [port port-number]] [gateway gw-id | group group-number | vm vm-id]] [instance | aggregate] [active]
- path-mgmt-stats {s5 | s5u | s8 | s8u | n9} [ref-point ref-point-name] [peer ip-address [port port-number]] [gateway gw-id | group group-number | vm vm-id]] [instance | aggregate]
Context
- [Tree] show mobile-gateway pdn path-mgmt-stats
Description
This command displays path management statistics.
Parameters
- ref-point-type
- specifies the interface type
- ip-address
- specifies an existing peer IP address
- port-number
- specifies a port ID
- gw-id
- specifies the gateway ID
- group-number
- specifies the group number
- vm-id
- specifies the VM ID
- keyword
- specifies the interface type
- ref-point-name
- specifies the reference point name, up to 32 characters
- instance
- shows routing instance statistics
- aggregate
- shows aggregated global statistics
- active
- shows active peer statistics
pdn-context
Syntax
- pdn-context [imsi | imei | msisdn string detail] [apn name] [epdg] [gateway gw-id | group group-number | card slot-number] [nemo]
- pdn-context imsi | imei | msisdn string [apn name] [gateway gw-id] acct {rf | gy | radius} [detail]
- pdn-context imsi | imei | msisdn string gx-usage-monitoring [gateway gw-id] [apn name] [monitoring-key key-name]
- pdn-context imsi | imei | msisdn string gx-time-of-day-info [gateway gw-id] [apn name]
- pdn-context imsi string detail {epdg | epdg-decrypt}
- pdn-context mac ieee-address [apn name] [gateway gw-id | group group-number | card slot-number] [detail]
- pdn-context default-session [def-session-pgw-ip pgw-ip-address [apn name] detail] [gateway gw-id | group group-number | card slot-number] [nemo]
- pdn-context default-session acct {rf | gy} [def-session-pgw-ip pgw-ip-address] [apn name] [gateway gw-id] [detail]
- pdn-context ipsec-lockout [summary]
- pdn-context ipsec-lockout idi IDi source-ip source-ip-address
- pdn-context subscriber-id subscriber-id [apn name] [gateway gw-id | group group-number | card slot-number] [access-type access-type] [nemo]
- pdn-context subscriber-id subscriber-id detail acct {rf | gy | radius} [apn name] [gateway gw-id]
- pdn-context default-session [apn name] [gateway gw-id | group group-number | card slot-number] [def-session-pgw-ip pgw-ip-address] [session-type {transit-pass-through | transit-capture}] [detail]
- pdn-context imsi | subscriber-id string [gateway gw-id] [apn name] acct {stats}
- pdn-context ue-ip ue-ip network-instance network-inst detail
- pdn-context up-seid string detail
- pdn-context cp-seid string [cp-ipv4 ipv4-address cp-ipv6 ipv6-address] detail
- pdn-context def-pfcp-u-sessions [network-realm realm-name] [pfcp-u-peer-ip ip-address] [gateway gw-id | group group-number | vm vm-id] [apn name]
- pdn-context wrap [gateway gw-id | group group-number | vm vm-id] [apn name]
- pdn-context field-name [gateway gw-id | group group-number | vm vm-id] [apn name]
Context
- [Tree] show mobile-gateway pdn pdn-context
Description
This command displays the current PDN contexts for each card.
Note:
- If the config mobile pdn allow-duplicate-msisdn command is enabled, the show mobile pdn pdn-context msisdn command does not show the existing sessions of the specified MSISDN.
- If the config mobile pdn allow-duplicate-imei command is enabled, the show mobile pdn pdn-context imei command does not show the existing sessions of the specified IMEI.
Parameters
- gw-id
- specifies the gateway ID
- name
- specifies the APN name for the context, up to 80 characters
- slot-number
- specifies the card slot number
- group-number
- specifies the group number
- IDi
- specifies the initiator ID for the IPsec authentication lockout list
- ieee-address
- specifies the UE MAC
- source-ip-address
- specifies the source IP address for the IPsec authentication lockout list
- imsi | imei | msisdn string
- specifies the UE’s IMSI or IMEI or MSISDN
- subscriber-id
- string value, up to 32 characters, stored in the Subscriber Profile Repository (SPR) that identifies each subscriber in the network; the value is assigned and maintained by individual operators and varies in format
- acct rf
- displays the RF context statistics
- acct radius
- displays the RADIUS accounting statistics
- detail
- displays the detailed summary information for the PDN context
- epdg-decrypt
- displays the decryption keys for both IKE and ESP SAs
- gx-usage-monitoring
- displays the Gx usage monitoring information for the specified IMSI, IMEI, or MSISDN
- ipsec-lockout
- displays IPsec lockout statistics for the PDN context
- monitoring-key
- displays detailed information for the monitoring key instance (scope, GSU, GSU-scope, usage-reported, number of threshold reports and on-demand reports)
- gx-time-of-day-info
- displays the Gx Time of Day procedures related information for the specified IMSI for each IP-CAN session including the current Revalidation-Time applicable for the session, Rule-Activation-Time, Rule-Deactivation-Time and the corresponding applicable rules
- up-seid string
- specifies the Session Endpoint Identifier for the UE session context, up to 40 characters
- cp-seid string
- specifies the Session Endpoint Identifier for the CP session context, up to 40 characters
- realm-name
- specifies the realm name of the network instance that has the PFCP GTP-U interface on the UP function, up to 80 characters
- ip-address
- specifies the CP function’s Sx/N4 reference point IPv4 address
- ipv6-address
- specifies the CP function’s Sx/N4 reference point IPv6 address, up to 64 characters
- summary
- displays summary information for IPsec lockout statistics
- field-name
- sets for printing the list of UEs together with the selected field
- wrap
- specifies that the UE IP address column is not truncated and the full IP address is visible by wrapping the output in the next line displays
cp-seid
Syntax
- cp-seid seid [cp-ipv4 ip-address] [cp-ipv6 ipv6-address]
- cp-seid seid [cp-ipv4 ip-address] [cp-ipv6 ipv6-address] detail
Context
- [Tree] show mobile-gateway pdn pdn-context cp-seid
Description
This command displays CP session context information related to a specific SEID.
Parameters
- seid
- specifies the SEID for the CP or UP session context, up to 40 characters
- ip-address
- specifies the CP function’s Sx/N4 reference point IPv4 address
- ipv6-address
- specifies the CP function’s Sx/N4 reference point IPv6 address, up to 64 characters
- detail
- displays detailed information
def-pfcp-u-sessions
Syntax
- def-pfcp-u-sessions [network-realm realm-name] [pfcp-u-peer-ip ip-address] [gateway gw-id] [apn apn-name] [card slot-number] [vm vm-id] [group group-number]
Context
- [Tree] show mobile-gateway pdn pdn-context def-pfcp-u-sessions
Description
This command displays the default PFCP-u shared tunnel session information, when PFCP-u (GTP-U) tunnels are configured to handle ICMPv6 RS/RA and NS/NA message exchange between the CP function and the UP function. When only def-pfcp-u is specified, results for all default PFCP-u sessions are displayed. The network-realm option may also be specified to identify the realm name of the network instance that has the PFCP GTP-U interface on the UP function, and is communicated in the Network-Instance IE part of the PFCP Session Establishment/Modification process. The pfcp-u-peer-ip option can also be used to display information for a specific PFCP-u Peer IP address.
Parameters
- realm-name
- specifies the realm name of the network instance that has the PFCP GTP-U interface on the UP function, up to 80 characters
- ip-address
- specifies the PFCP-u peer IP address, up to 64 characters
- gw-id
- specifies the gateway ID
- apn-name
- specifies the APN name, up to 80 characters
- slot-number
- specifies the card slot number (applicable only to 7750 SR MG)
- vm-id
- specifies the VM ID
- group-number
- specifies the group number
ue-ip
Syntax
- ue-ip ip-address network-instance network-instance [access-type {utran | geran | wlan | gan | hspa | eutran | ehrpd | hrpd | 1xrtt | umb | virtual | eutran-nb-iot}]
- ue-ip ip-address network-instance network-instance detail acct stats urr-id urr-id [access-type {utran | geran | wlan | gan | hspa | eutran | ehrpd | hrpd | 1xrtt | umb | virtual | eutran-nb-iot}]
- ue-ip ip-address network-instance network-instance detail [access-type {utran | geran | wlan | gan | hspa | eutran | ehrpd | hrpd | 1xrtt | umb | virtual | eutran-nb-iot}]
Context
- [Tree] show mobile-gateway pdn pdn-context ue-ip
Description
This command displays context information related to a specific UE IP address.
Parameters
- ip-address
- specifies the UE IP address
- network-instance
- specifies the network instance, up to 80 characters
- urr-id
- specifies a unique identity for the usage rule report for this session
- detail
- displays detailed information
- access-type
- specifies access type
up-seid
Syntax
- up-seid seid
- up-seid seid detail acct stats [urr-id urr-id]
- up-seid seid detail
Context
- [Tree] show mobile-gateway pdn pdn-context up-seid
Description
This command displays context information related to a specific Session Endpoint Identifier for the UP session context.
Parameters
- seid
- specifies the Session Endpoint Identifier for the CP or UP session context, up to 40 characters
- urr-id
- specifies a unique identity for the usage rule report for this session
- detail
- displays detailed information
pdu-session
Syntax
- pdu-session supi imsi-msisdn [detail] acct nchf
- pdu-session
- pdu-session supi imsi-msisdn
- pdu-session supi imsi-msisdn detail
Context
- [Tree] show mobile-gateway pdn pdu-session
Description
This command displays context information related to the PDU session SUPI and Nchf service.
Parameters
- imsi-msisdn
- specifies the SUPI identifier, up to 15 characters
- detail
- specifies detail information
- nchf
- specifies Nchf information
qos-flow
Syntax
- qos-flow [dnn dnn]
- qos-flow supi supi [dnn dnn]
- qos-flow supi supi detail [qfi qfi] [dnn dnn]
Context
- [Tree] show mobile-gateway pdn qos-flow
Description
This command displays QoS flow information for the specified SUPI for 5G sessions.
Parameters
- dnn
- specifies the DNN, up to 80 characters
- supi
- specifies the SUPI identifier, up to 15 characters
- detail
- specifies detail information
- qfi
- specifies the QFI identifier
ref-point-peers
Syntax
- ref-point-peers {s11 | s11u | s12 | s1u | s4 | s4u | s5 | s5u | s8 | s8u | gx | rf | gn | gnu | gp | gpu | ga | radius | gy | s2a | s2a-gtp | s2b | s6b | swm | sww | sta | sx-n4 | sd | dhcp | n3 | n9} [peer ip-address [port port-number]] [gateway gw-id] peer-type {sgw | pgw}]
- ref-point-peers {gn | gnu | gp | gpu} [ref-point ref-point-name] [peer ip-address [port port-number]] [gateway gw-id] [active] ref-point-peers {radius} [radius-group radius-group [peer ip-address]] [gateway gw-id]
- ref-point-peers {s5 | s5u | s8 | s8u | n9} [ref-point ref-point-name] [peer ip-address [port <port-number>]] [gateway gw-id]
- ref-point-peers {dhcp} [dhcp-group dhcp-group [peer ip-address]] [gateway gw-id]
- ref-point-peers {sww} sww-type [peer ip-address] [gateway gw-id] [ref-point ref-point-name]
- ref-point-peers {cdbx} [peer ip-address]
- ref-point-peers [gateway gw-id] {swm | gy} {dia-routing-table}
- ref-point-peers {swm} swm-type {dia-routing-table} [peer ip-address] [gateway gw-id] [ref-point ref-point-name]
- ref-point-peers {s6b | gx | swm | sta | sd} [gateway-id gw-id] [peer ip-address [port port-number]] doic
- ref-point-peer {sx-n4} [peer ip-address] [gateway gw-id] [ref-point ref-point-name]
Context
- [Tree] show mobile-gateway pdn ref-point-peers
Description
This command displays the reference point peers for the router instance.
Parameters
- s11 | s11u | s12 | s1u | s4 | s4u | s5 | s5u | s8 | s8u | gx | rf | gn | gnu | gp | gpu | ga | radius | gy | s2a | s2a-gtp | s2b | s6b | swm | sww | sta | sx-n4 | sd | dhcp | n3 | n9
- specifies the reference point type
- ip-address
- specifies the IP address of the peer
- port-number
- specifies the port number
- gw-id
- specifies the gateway ID
- peer-type
- specifies the peer type
- group-name
- specifies the RADIUS group name
- ref-point-name
- specifies the reference point name
- sww-type
- specifies the SWw type
- active
- specifies the active peers
- radius
- specifies the RADIUS as the peer
- dhcp
- specifies the DHCP peers
- group-name
- specifies the DHCP group name
- dia-routing-table
- specifies the configuration of the Diameter routing table
- cdbx
- specifies the cloud database peers
- doic
- specifies the realms and hosts with valid Diameter Overload Indication Conveyance (DOIC) parameters
- vm-id
- specifies the VM ID
ref-point-stats
Syntax
- ref-point-stats peer ip-address [port port-number]] [gateway gw-id | group group-number | card slot-number] [instance | aggregate] [peer-type {sgw | pgw | epdg}]
- ref-point-stats {s11 | s11u | s12 | s1u | s4 | s4u | s5 | s5u | s8 | s8u | gx | rf | gn | gnu | ga |gp | gpu | gy | s2a | s2a-gtp | s2b | s2bu | s6b | swm | sww | sta | sd | sx-n4 | n3 | n9}[ peer ip-address [port port-number]] [gateway gw-id | group group-number | card slot-number] [instance | aggregate] {failure-codes}
- ref-point-stats {gn | gnu | gp | gpu} [ref-point ref-point-name] [peer ip-address [port port-number]] [gateway gw-id | group group-number | card slot-number] [instance | aggregate] [active]
- ref-point-stats {s5 | s5u | s8 | s8u | gn | gnu | gp | gpu | n9} [ref-point ref-point-name] [peer ip-address [port port-number]] [gateway gw-id | group group-number | card slot-number] [instance | aggregate]
- ref-point-stats {dhcp} [dhcp-group dhcp-group [peer ip-address]] [gateway gw-id> | group group-number | card slot-number] [instance | aggregate]
- ref-point-stats {pi} [pi-peer ipv4 [port port-number]] [gateway gw-id | group group-number | card slot-number] [instance | aggregate]
- ref-point-stats {radius} [radius-group radius-group [peer ip-address]] [gateway gw-id | group group-number | card slot-number] [instance | aggregate]
- ref-point-stats {swu} [throttling | plmn-black-white-list] [card slot-number] [aggregate] [failure-codes]
- ref-point-stats {sww} sww-type [peer ip-address] [gateway gw-id | group group-number | card slot-number] [instance | aggregate] [ref-point ref-point-name]
- ref-point-stats {cdbx} [peer ip-address] [vm vm-id]
- ref-point-stats {sx-n4} [ref-point ref-point-name] [peer ip-address] [gateway gw-id | group group-number | card slot-number] [instance | aggregate]
- ref-point-stats {t6c} [ref-point ref-point-name] [peer ip-address [port port-number]] [peer-type scef] [gateway gw-id | group group-number | card slot-number] [instance | aggregate] [failure-codes]
- ref-point-stats {ibcp} [gateway gw-id | card slot-number] [aggregate]
Context
- [Tree] show mobile-gateway pdn ref-point-stats
Description
This command displays reference point statistics.
Parameters
- s11 | s11u | s12 | s1u | s4 | s4u | s5 | s5u | s8 | s8u | gx | rf | gn | gnu | ga |gp | gpu | gy | s2a | s2a-gtp | s2b | s2bu | s6b | swm | sww | sta | sd | sx-n4 | n3 | n9
- specifies the reference point type
Note: In the show outputs, the Number of
Bearers of the gnu/gpu/s1u/s8u/s12 reference point types, is shown
only, where the peer filter is used. For the s4u/s5u/s11u reference point types,
the Number of Bearers is shown even without the peer
filter.
- ip-address | fqdn
- specifies an existing peer IP address/FQDN
- port
- specifies a port ID
- slot-number
- specifies the card slot number
- gw-id
- specifies the gateway ID
- group-number
- specifies the group number
- instance
- keyword to show statistics per-peer per-card
- aggregate
- shows aggregated statistics globally
- failure-codes
- keyword to show failure-code statistics
- active
- specifies the active peers
- radius
- specifies the RADIUS reference point
- dhcp
- specifies the DHCP reference point
- radius-group
- specifies the RADIUS group
- dhcp-group
- specifies the DHCP group
- peer-type
- specifies the peer type
- sww-type
- specifies the SWw type
- vm-id
- specifies the VM ID
- cdbx
- specifies the cloud database reference point
- pi
- keyword to specify PI reference point
- ipv4
- specifies the PI peer IP address
- swu
- specifies the SWu reference point
- throttling
- shows the relevant statistics related to IKE overload control state
- plmn-black-white-list
- specifies the statistics of the PLMN denylist/allowlist
- t6c
- specifies the reference point between PGW (PCEF) and SCEF
- ibcp
- keyword to display the BNG IBCP statistics for both the default tunnel and the per-session tunnel
- scef
- specifies the peer type, scef is the only applicable peer type for t6c
statistics
Syntax
- statistics [gw-type sgw | pgw | upf | smf] [gateway gw-id | group group-number | vm vm-id] [summary] [suppress-zero]
- statistics attach-failure-statistics [gateway gw-id | group group-number] [summary]
Context
- [Tree] show mobile-gateway pdn statistics
Description
This command displays statistics for each card.
Parameters
- gw-type
- specifies the gateway type
- gw-id
- specifies the gateway ID
- group-number
- specifies the group number
- vm-id
- specifies the VM ID
- summary
- displays summarized information
- attach-failure-statistics
- Keyword to attach failure statistics
- suppress-zero
- Keyword to hide zero valued counters
ue-context
Syntax
- ue-context [imei imei | imsi imsi | mac ieee-address | msisdn msisdn] [gateway gw-id | group group-number | vm vm-id] [access-type access-type] [nemo]
- ue-context {imei imei | imsi imsi | mac ieee-address | msisdn msisdn} detail [gateway gw-id | group group-number | vm vm-id] [access-type access-type] [nemo]
- ue-context {gpsi gpsi | pei pei | supi supi} [detail]
Context
- [Tree] show mobile-gateway pdn ue-context
Description
This command displays the individual UE contexts for each session.
Parameters
- imei imsi ieee-address msisdn gpsi pei supi
- Specifies the UE’s IMSI, IMEI, MSISDN, MAC address, SUPI, GPSI, or PEI.
- detail
- Keyword to display detailed summary information for the UE context.
- gw-id
- Specifies the gateway ID.
- group-number
- Specifies the group number.
- vm-id
- Specifies the VM ID.
- access-type
- Specifies the access type.
- nemo
- Keyword.
def-pfcp-u-sessions
Syntax
- def-pfcp-u-sessions [network-realm realm-name] [pfcp-u-peer-ip ip-address] [gateway gw-id] [card slot-number] [vm vm-id] [group group-number]
Context
- [Tree] show mobile-gateway pdn ue-context def-pfcp-u-sessions
Description
This command displays the default PFCP-u shared tunnel session information, when PFCP-u (GTP-U) tunnels are configured to handle ICMPv6 RS/RA and NS/NA message exchange between the CP function and the UP function. When only def-pfcp-u is specified, results for all default PFCP-u sessions are displayed. The network-realm option may also be specified to identify the realm name of the network instance that has the PFCP GTP-U interface on the UP function, and is communicated in the Network-Instance IE part of the PFCP Session Establishment/Modification process. The pfcp-u-peer-ip option can also be used to display information for a specific PFCP-u Peer IP address.
Parameters
- realm-name
- specifies the realm name of the network instance that has the PFCP GTP-U interface on the UP function, up to 80 characters
- ip-address
- specifies the PFCP-u peer IP address, up to 64 characters
- gw-id
- specifies the gateway ID
- slot-number
- specifies the card slot number (applicable only to 7750 SR MG)
- vm-id
- specifies the VM ID
- group-number
- specifies the group number
profile
Syntax
- profile
Context
- [Tree] show mobile-gateway profile
Description
This command enables the context to display configured mobile gateway profiles.
authentication-database
Syntax
- authentication-database name
- authentication-database name associations
- authentication-database name entry name
- authentication-database
Context
- [Tree] show mobile-gateway profile authentication-database
Description
This command displays ADB information. If no parameter is specified, the output displays the list of configured ADBs.
Parameters
- authentication-database name
- specifies the name of the ADB, up to 32 characters
- entry name
- specifies the name of the entry for which to display detailed information, up to 32 characters
- associations
- specifies to display the references to entry points.
Output
The following output examples show ADB information.
Example outputs ADB information
A:BNG-SMF# show mobile-gateway profile authentication-database
===============================================================================
Authentication database instances
===============================================================================
Name Admin-state Entries Entries-up
-------------------------------------------------------------------------------
adb1 enabled 1 1
adb2 enabled 1 1
-------------------------------------------------------------------------------
No. of authentication database instances: 2
===============================================================================
A:BNG-SMF#
A:BNG-SMF# show mobile-gateway profile authentication-database "adb1"
===============================================================================
Authentication database "adb1"
===============================================================================
Administrative state : enabled
Description : N/A
Default entry : 10
Last management change : 04/22/2021 19:03:12
===============================================================================
===============================================================================
Name Admin-state Oper-state Match-count
-------------------------------------------------------------------------------
10 enabled up 5533
-------------------------------------------------------------------------------
No. of entries: 1
===============================================================================
A:BNG-SMF#
A:BNG-SMF# show mobile-gateway profile authentication-database "adb1" entry "10"
===============================================================================
Authentication database "adb1" entry "10"
===============================================================================
Description : (Not Specified)
Administrative state : enabled
Operational state : up
Match Count : 5533
Fail Reason : N/A
Access Loop Encapsulation : N/A
Action : accept
Address Assignment :
AAA IPv4 : radius
AAA IPv6 NA : N/A
AAA IPv6 PD : N/A
AAA IPv6 SLAAC : N/A
Local IPv4 : p1
Local IPv6 NA : p1
Local IPv6 PD : p1
Local IPv6 SLAAC : N/A
Lifetimes :
Valid : N/A
Preferred : N/A
dhcpv6-renew : N/A
dhcpv6-renew : N/A
PD as Framed Route : No
Delegated Prefix Length : N/A
Unmatching Prefix : N/A
APN : mybngvrf
Charging :
BNG Charging Profile : N/A
CP Volume Tracking :
Max Upstream : N/A
Max Downstream : N/A
Max Total : N/A
CP NAT Profile : N/A
DHCP Profile : mydefault
DHCPv6 Profile : N/A
IP Anti-Spoof : N/A
Interface :
Group Interface Template : defaultgrp
Link Local Address : N/A
Sap Template : defaultsap
Match :
Circuit ID : N/A
Layer-2 Access ID :
Remote ID : N/A
UP IP address : N/A
Username Domain : N/A
Vendor Class : N/A
C-VLAN ID range : N/A
S-VLAN ID range : N/A
PPPoE :
pado-delay : N/A
Subscriber Mgmt :
SLA Profile : base
Sub Profile : base
Router Advertisement Profile : N/A
Session Timeout : N/A
===============================================================================
A:BNG-SMF#
A:BNG-SMF# show mobile-gateway profile authentication-database "adb1" associations
===============================================================================
BNG entry-point entry associations
===============================================================================
entry-point entry
-------------------------------------------------------------------------------
e1 10 IPoE
e1 10 PPPoE auth
-------------------------------------------------------------------------------
No. of BNG entry-point entries: 2
===============================================================================bng
Syntax
- bng
Context
- [Tree] show mobile-gateway profile bng
Description
This command enables the context to display the configured BNG profiles.
cp-nat-profile
Syntax
- cp-nat-profile profile-name
Context
- [Tree] show mobile-gateway profile bng cp-nat-profile
Description
This command displays the specified CP NAT profile information.
Parameters
- profile-name
- the name of the CP NAT profile
Output
The following output example shows information for the specified CP NAT profile.
Example output CP NAT profile
*A:Dut-V# show mobile-gateway profile bng cp-nat-profile "Dut-C_pol_NATPolicy1"
===============================================================================
CP NAT profile
===============================================================================
Description : Converted old nat-pool of dut Dut-C into CUPS →
nat-cp-profile
Access mode : auto
Last management change : 10/23/2020 13:18:00
-------------------------------------------------------------------------------
Pool : NATPool1
Description : nat-policy Dut-C_pol_NATPolicy1 with →
nat-pool NATPool1
Mode : napt
Port forwarding range : 1 - 1023
Port reservation : 512 ports
Forwarding port limit : (Not Specified)
Local address assignment pool
Name : NATPool1
Network realm : 123321
Gateway : 1
UP NAT policy : NATPolicy1
Last management change : 10/23/2020 13:18:01 entry-point
Syntax
- entry-point entry-point-name
- entry-point
- entry-point entry-point-name associations
- entry-point entry-point-name entry entry-name
Context
- [Tree] show mobile-gateway profile bng entry-point
Description
This command displays BNG entry point information. If no parameter is specified, the output displays the list of the configured entry points.
Parameters
- entry-point-name
- specifies the name of the entry point, up to 32 characters
- entry-name
- specifies the name of the entry for which to display detailed information, up to 32 characters
- associations
- specifies to display the references to the entry point
Output
The following output examples show BNG entry point information.
Example outputs BNG entry point information
A:BNG-SMF# show mobile-gateway profile bng entry-point
===============================================================================
BNG entry-points
===============================================================================
Name Admin-state Entries Entries-up
-------------------------------------------------------------------------------
e1 enabled 1 1
-------------------------------------------------------------------------------
No. of entry-points: 1
===============================================================================
A:BNG-SMF#
A:BNG-SMF# show mobile-gateway profile bng entry-point "e1"
===============================================================================
BNG entry-point
===============================================================================
Name : e1
Description :
Administrative state : enabled
Match ID : 1
Attribute : up-ip
Optional : no
-------------------------------------------------------------------------------
Entry-name Admin-state Oper-state Reason (if down)
-------------------------------------------------------------------------------
10 enabled up
-------------------------------------------------------------------------------
===============================================================================
A:BNG-SMF#
A:BNG-SMF# show mobile-gateway profile bng entry-point "e1" entry "10"
===============================================================================
BNG entry-point entry
===============================================================================
Entry name : 10
Description : (Not Specified)
Administrative state : enabled
Operational state : up
Per-MAC session limit : 1
Per-L2-Access-Id session limit : N/A
Per-L2-Circuit session limit : N/A
Session lockout profile : N/A
Match
UP IP address : 172.16.10.51
Subscriber identification : per-session
PPPoE
PPPoE profile : pppoeProf1
Session ID allocation scope : l2-circuit-mac
Session ID random : No
ADB for PAP or CHAP no. 1 : adb1
ADB for PAP or CHAP no. 2 : adb2
IPoE
IPoE profile : mydefault
ADB no. 1 : adb1
ADB no. 2 : adb2
===============================================================================call-insight
Syntax
- call-insight
Context
- [Tree] show mobile-gateway profile call-insight
Description
This command displays call-insight profiles.
ue
Syntax
- ue profile-name
Context
- [Tree] show mobile-gateway profile call-insight ue
Description
This command displays information for the call trace profile specified by the profile name or all profiles when no name is specified.
Parameters
- profile-name
- displays information about the specified profile
Output
The following output example shows call trace UE profile information, and Show mobile profile call-insight UE output fields describes the fields.
Example output call trace UE profile
# show mobile-gateway profile call-insight ue "default"
===============================================================================
Call-insight UE profile
===============================================================================
Profile name : default
Description : none
Live output : none
Reference points : dhcp,dns,ga,gn,gp,gx,gxc,pi,radius,rf,ro,s1,s11,s12,s2a
,s2b,s4,s5,s6b,s8,sd,swm,swu,swu-cleartext,sww,sta,sx-n4
User-traffic : none
Events : none
Format : simulated-pcap
Size limit : 10 MB
Time limit : 86400 secs
user-traffic capture-type : packet-and-stats
user-traffic capture-location : inner-only
-------------------------------------------------------------------------------
Number of profiles : 1
===============================================================================| Label | Description |
|---|---|
| Profile name | The name of the current profile |
| Description | The profile, if necessary |
| Live output | Where to resend each captured message/event |
| Reference points | Which reference points are needed |
| User traffic | The user traffic |
| Events | The events that occur with the profile |
| Format | The format of the profile |
| Size limit | The space used in total |
| Time limit | The time used in total |
| User traffic capture type | The type of the captured user traffic |
| User traffic capture location | The location of the captured user traffic |
| Number of profiles | The number of profiles retrieved |
charging
Syntax
- charging
Context
- [Tree] show mobile-gateway profile charging
Description
This command enables the context to display charging profile information.
bng-charging
Syntax
- bng-charging
Context
- [Tree] show mobile-gateway profile charging bng-charging
Description
No description found
cloud-db
Syntax
- cloud-db
Context
- [Tree] show mobile-gateway profile cloud-db
Description
This command displays the cloud database profile.
Parameters
- profile-name
- Specifies a profile name, up to 32 characters.
gtp
Syntax
- gtp [profile-name]
Context
- [Tree] show mobile-gateway profile gtp
Description
This command enables the context to display PGW and SGW charging profile information.
Parameters
- profile-name
- displays information about the specified existing profile name
Output
The following output example shows PGW and SGW charging profile information, and Show GTP profile output fields describes the output fields.
Example output GTP profile statistics
# show mobile-gateway profile gtp "default"
===============================================================================
GTP profile
===============================================================================
Profile name : default
Description : N/A
Msg retransmit timeout-msec: 5000 ms Msg retransmit retry count : 3
Keep alive interval : 60 secs Keep alive retry count : 4
Keep alive T3 response : 5 secs
IP TTL : 255 IP DSCP : 56
GTPv1 Configurable Cause Code IEs
APN Shutdown Cause Code : 78 Username Missing Cause Code: 70
GW Suspend Cause Code : 113 Sx MSG Timeout Cause Code : 209
GTPv2 Configurable Cause Code IEs
APN Shutdown Cause Code : 93 Username Missing Cause Code: 70
GW Suspend Cause Code : 89 Sx MSG Timeout Cause Code : 94
GTPv1 Configurable IEs
Recovery IE : Included NSAPI IE : Excluded
PCO IE : Included Charging GW Addr IE : Included
Common Flags IE : Excluded APN Restriction IE : Included
BCM IE : Included
GTPv2 Configurable IEs
PCO IE : Included APCO IE : Included
Node Features IE : Included DDN IMSI IE : Included
DDN FTEID IE : Included Access Point MAC address IE: Excluded
ARP IE : Included Paging Priority : Included
CSG Reporting Action : Included Change Reporting Action : Included
Signaling Priority : Included RAN/NAS Cause IE : Included
MO Exception Data Counter : Excluded Serving PLMN Rate Control : Excluded
CN Operator Selection : Included ULI-Timestamp : Included
TWAN Identifier : Included TWAN Id TimeStamp : Included
Origination Timestamp : Included Maximum Wait Time : Included
LCI IE : Included OCI IE : Included
AAA Node Identifier : Included
UP Selection Indication : Included
non-3gpp-rat-type-pref : wlan
GTPv2 Node Features
CIOT : Excluded
-------------------------------------------------------------------------------
Number of profiles : 1
===============================================================================| Label | Description |
|---|---|
| Profile name | The name of the profile being viewed |
| Description | Describes the profile, if applicable |
| Msg retransmit timeout | The time, in seconds, before a request message is retransmitted |
| Msg retransmit retry count | The number of retries until a request message to the server fails |
| Keep alive interval | The keep alive message interval, in seconds |
| Keep alive retry count | The number of retries until the path is declared to be down |
| Keep alive T3 response | The time, in seconds, until a message is retransmitted |
| IP TTL | The IP TTL value for GTP signaling messages |
| IP DSCP | The DSCP value in the IP header for GTP signaling messages |
| GTPv2 Configurable Cause Code IEs | The GTPv2 Configurable Cause Code IEs context |
| APN Shutdown Cause Code | The code for the Cause IE when the APN is in shutdown state |
| GW Suspend Cause Code | The code for the Cause IE when the gateway is in suspend state |
| Username Missing Cause Code | The code for the Cause IE when the PDN connection activation is rejected because a username or password is required for session activation |
| Sx MSG Timeout Cause Code |
The code for the Cause IE in the following cases:
|
| GTPv1 Configurable IEs | The GTPv1 Configurable IEs context |
| Recovery IE | The option to include or exclude the recovery IE from the PGW/GGSN create PDP context response, update PDP context request, and update PDP context response messages |
| NSAPI IE | The option to include or exclude the NSAPI IE in the PGW/GGSN create PDP context response messages |
| PCO IE | The option to include or exclude the PCO IE in the PGW/GGSN initiate PDP context request, create PDP context response, and update PDP context response messages |
| Charging GW Addr IE | The option to include or exclude the charging gateway address in the PGW/GGSN create PDP context response and update PDP context response messages |
| Common Flags IE | The option to include or exclude the common flags IE in the PGW/GGSN create PDP context response and update PDP context response messages |
| APN Restriction IE | The option to include or exclude the APN restriction IE in the PGW/GGSN create PDP context response, update PDP context request, and update PDP context response messages |
| BCM IE | The option to include or exclude the BCM IE in the PGW/GGSN messages |
| GTPv2 Configurable IEs | The GTPv2 Configurable IEs context |
| PCO IE | The option to include or exclude the PCO/ePCO IE in the GTPv2 messages |
| APCO IE | The option to include or exclude the APCO IE in the GTPv2 messages |
| Node Features IE | The option to include or exclude the node features IE in the PGW/GGSN messages |
| DDN IMSI IE | The option to include or exclude the DDN IMSI IE in the PGW/GGSN messages |
| DDN FTEID IE | The option to include or exclude the DDN FTEID IE in the PGW/GGSN |
| Access Point MAC Address IE | The option to cause the ePDG to send the WiFi Access Point MAC address if learned from the IDi format |
| ARP IE | The option to include or exclude the ARP IE in the PGW/GGSN messages |
| Paging Priority | The option to include or exclude of the paging and service information IE within a DDN message on an S11 interface |
| CSG Reporting Action | The option to include or exclude the CSG reporting action IE in GTPv2 messages |
| Change Reporting Action | The option to include or exclude the change reporting action IE in GTPv2 messages |
| Signaling Priority | The option to include or exclude the signaling priority indication IE on S5 and S8 interfaces |
| RAN/NAS Cause IE | The option to include or exclude the RAN/NAS cause IE in the GTPv2 messages |
| MO Exception Data Counter | The option to include or exclude the MO Exception Data Counter IE in GTPv2 messages |
| Serving PLMN Rate Control | The option to include or exclude the serving PLMN rate control IE in GTPv2 messages |
| CN Operator Selection | The option to include or exclude the sending of a CN Operator Selection Entity IE |
| ULI-Timestamp | The option to include or exclude the sending of a ULI Timestamp IE |
| TWAN Identifier | The TWAN identifier |
| TWAN Id Timestamp | The option to include or exclude the TWAN Timestamp Id |
| Origination Timestamp | The option to include or exclude the Origination Timestamp IE |
| Maximum Wait Time | The option to include or exclude the Maximum Wait Time IE |
| LCI | Load Control Indicator IE |
| OCI | Overload Control Indicator IE |
| AAA Node Identifier | The option to include or exclude the AAA node identifier IE |
| non-3gpp-rat-type-pref | The RAT type value that the ePDG sends to the PGW |
| GTPv2 Node Features | The GTPv2 Node Features context |
| CIOT | The option to include or exclude the CIOT flag in the Node Features IE |
| Number of Profiles | The number of profiles being viewed |
pgw-selection-candidate-list
Syntax
- pgw-selection-candidate-list [list-name]
Context
- [Tree] show mobile-gateway profile list pgw-selection-candidate-list
Description
This command displays PGW selection candidate list information.
Parameters
- list-name
- displays information about the specified existing list
pfcp
Syntax
- pfcp
Context
- [Tree] show mobile-gateway profile pfcp
Description
This command enables the context to display PFCP profile information.
pfcp-association-peer-list
Syntax
- pfcp-association-peer-list [profile-name]
Context
- [Tree] show mobile-gateway profile pfcp pfcp-association-peer-list
Description
This command displays PFCP association peer list profile information.
Parameters
- profile-name
- displays information about the specified existing profile
Output
The following output example shows PFCP association peer list profile information
Example output PFCP association peer list profile
# show mobile-gateway profile pfcp pfcp-association-peer-list
===============================================================================
PFCP association peer list profile
===============================================================================
Profile name : pfcpAPList1
Description : Test List
Node ID : 310.150.PGW.1.1.1
BFD : Disabled
Partial Failure : Enabled
UE IP Allocation : Disabled
Peer [Port] : 33.34.1.1 [8001]
Peer [Port] : 3ffe::2122:101 [8005]
Node ID : 510.180.PGW.1.1.2
BFD : Disabled
Partial Failure : Disabled
UE IP Allocation : Disabled
Peer : 33.34.1.2
Peer : 3ffe::2122:102
-------------------------------------------------------------------------------
Number of PFCP-peers : 4
-------------------------------------------------------------------------------
Number of profiles : 1
===============================================================================pfcp-profile
Syntax
- pfcp-profile [profile-name]
Context
- [Tree] show mobile-gateway profile pfcp pfcp-profile
Description
This command displays PFCP profile information.
Parameters
- profile-name
- displays information about the specified existing profile
Output
The following example shows PFCP profile information and Show mobile profile PFCP output fields describes the output fields.
Example output PFCP profile
# show mobile-gateway profile pfcp pfcp-profile
===============================================================================
PFCP profile
===============================================================================
Profile name : pfcp_prof_1
Description : N/A
Msg retransmit timeout : 5 secs Msg retransmit retry count : 3
Heartbeat timeout : 5 secs Heartbeat retry count : 4
Heartbeat response : 60 secs
IP TTL : 255 IP DSCP : 56
Association Retry Time : 10 secs
PDI Optimization : enabled
PFCP Configurable IEs
LCI IE :Included/Excluded OCI IE: Included/Excluded
PFCP-u Shared Tunnel
Re-attempt timer : 600 secs
-------------------------------------------------------------------------------
Number of profiles : 1
===============================================================================| Label | Description |
|---|---|
| Profile name | The name of the PFCP profile |
| Description | The description of the PFCP profile |
| Msg retransmit timeout | The time, in seconds, that the PFCP waits before resending a message if there is no response to an initial message |
| Msg retransmit retry count | The number of times the PFCP attempts to send a message |
| Heartbeat timeout | The heartbeat timeout interval, in seconds |
| Heartbeat retry count | The heartbeat retry count |
| Heartbeat response | The heartbeat response, in seconds |
| IP TTL | The IP TTL value used for PFCP signaling messages |
| IP DSCP | The DSCP value in the IP Header used for PFCP signaling messages |
| Association Retry Time | The association retry time |
| PDI Optimization | The PDI optimization status |
| PFCP-u Shared Tunnel Re-attempt Timer | The configured value of the re-attempt timer for failed PFCP-u tunnel session establishment between the CP function and the UP function, when ICMPv6 RS/RA and NS/NA message handling is enabled for the CP function |
| LCI IE | LCI information to be included or excluded |
| OCI IE | OCI information to be included or excluded |
| Number of profiles | The number of profiles retrieved |
up-peer-list
Syntax
- up-peer-list [profile-name]
Context
- [Tree] show mobile-gateway profile pfcp up-peer-list
Description
This command displays user plane peer list profile information.
Parameters
- profile-name
- displays information about the specified existing profile
Output
The following example shows user plane peer list profile information and Show mobile profile PFCP UP peer list output fields describes the output fields.
Example output user plane peer list profile
# show mobile-gateway profile pfcp up-peer-list "listTest"
===============================================================================
UP peer list profile
===============================================================================
-------------------------------------------------------------------------------
Profile name : listTest
Description : N/A
-------------------------------------------------------------------------------
Peer : 1.2.3.4
UPF Selection : True
upf-id : -
APN : test
tai-lai-list : TaiLaiListTest
Block : true
EPS interworking : Enabled
Slice : (Not Specified)
-------------------------------------------------------------------------------
Number of profiles : 1
=============================================================================== # show mobile-gateway profile pfcp up-peer-list “upf_peers”
===============================================================================
UP peer list profile
===============================================================================
-------------------------------------------------------------------------------
Profile name : upf_peers
Description : N/A
-------------------------------------------------------------------------------
Peer : 33.34.1.1
UPF Selection : True
upf-id : 69010000-eb45-418e-9694-40000eb4518e
Disable EPS interworking : Enabled
Slice : (Not Specified)
APN : apn.interntSgiRedirect.1.1.com
Network Realm : realmForinterntSgi
pool-Name : pool1Grp1
APN : apn.interntSgiEntpRedirect.1.1.com
PCO option
DNS Addr IPv4 : 20.20.20.20
DNS Sec Addr IPv6 : 3ffe:567::
Network Realm : realmForinterntSgi
pool-Name : pool2Grp1
APN : apn.imsSgiRedirect.1.1.com
PCO option
DNS Addr IPv4 : 20.20.20.20
DNS Sec Addr IPv6 : 3ffe:567::
Network Realm : realmForimsSgi
pool-Name : pool1Grp1
pool-Name : pool2Grp1
pool-Name : pool3Grp1
Network Realm : realmForinterntSgi
ip-pool-distribution : enabled
pool-Name : pool1Grp1
IPv4/IPv6 Prefix pool : 6.0.0.0/9
3ffe:60::/48
Remote : No supp-dotzero-broadcast-add : No
Hold-timer : 3 Hold-for-pdn : No
Round-Robin : No
Priority : none
pool-Name : pool2Grp1
IPv4/IPv6 Prefix pool : 6.128.0.0/9
3ffe:188::/48
Remote : No supp-dotzero-broadcast-add : No
Hold-timer : 3 Hold-for-pdn : No
Round-Robin : No
Priority : none
Network Realm : realmForimsSgi
ip-pool-distribution : enabled
pool-Name : pool1Grp1
IPv4/IPv6 Prefix pool : 6.0.0.0/23
3ffe:60::/55
Remote : No supp-dotzero-broadcast-add : No
Hold-timer : 0 Hold-for-pdn : No
Round-Robin : No
Priority : none
pool-Name : pool2Grp1
IPv4/IPv6 Prefix pool : 6.1.0.0/23
3ffe:60:1000::/55
Remote : No supp-dotzero-broadcast-add : No
Hold-timer : 0 Hold-for-pdn : No
Round-Robin : No
Priority : low
pool-Name : pool3Grp1
IPv4/IPv6 Prefix pool : 6.2.0.0/23
3ffe:60:2000::/55
Remote : No supp-dotzero-broadcast-add : No
Hold-timer : 0 Hold-for-pdn : No
Round-Robin : No
Priority : high
-------------------------------------------------------------------------------
Number of profiles : 1
===============================================================================| Label | Description |
|---|---|
| UP peer list profile | |
| Profile name | The name of the UP peer list |
| Peer | IPv4 or IPv6 address of the UP peer list peer |
| UPF Selection | The peer selection status is allowed (True) or not allowed (False) |
| upf-id |
The UPF ID used by the SMF in charging records to report charging information over the Nchf SBI, to allocate quota and report usage per UPF Configured locally per peer, but is overridden by the UPF ID received in the NRF discovery, if NRF is used |
| Block | The blocking state of the UP peer according to the block configuration. “True” is displayed when the peer is blocked at the APN level or when all the APN prefixes for this peer are blocked |
| EPS interworking | The EPS interworking is enabled or disabled |
| Slice | The slice specifies the network slice name associated with the user plane peer |
| Suspend-peer | The peer suspend status is enabled or disabled |
| Group-label profile | The group-label profile name associated with the group for the UP instance; the group association creates a logical grouping of target nodes with selection criteria based on different parameters (APN, TAI, LAI, serving node, IP address, and so on) |
| APN | The APN name associated with the UP peer |
| PCO option | The UE PCO options |
| DNS Addr IPv4 | The IPv4 address of the primary DNS server used by a UE to resolve domain names to IP addresses |
| DNS Sec Addr IPv4 | The IPv4 address of the secondary DNS server used by a UE to resolve domain names to IP addresses |
| DNS Addr IPv6 | The IPv6 address of the primary DNS server used by a UE to resolve domain names to IP addresses |
| DNS Sec Addr IPv6 | The IPv6 address of the secondary DNS server used by a UE to resolve domain names to IP addresses |
| Network Realm | The network realm of the APN |
| ip-pool-distribution | Indicates if the CP function distributes the allocation of the UE IP addresses across the configured IP address pools and the prefixes configured under these IP address pools for the network realm |
| pool-Name | The IP pool name |
| IPv4/IPv6 Prefix pool | The IPv4/IPv6 prefix pool |
| Remote | Indicates a remote IP pool allocation |
| supp-dotzero-broadcast-add | The IP address pool to suppress allocation of 0 and x.x.x.255 IP addresses from the local IP address pool to mobile customers |
| Hold-timer | The value configured for the IP address pool hold-timer, after which the PDN session is released and the gateway assigns the IP address to another PDN session |
| Hold-for-pdn | Indicates if the hold for PDN option is enabled, in which case the gateway reassigns the held IP address to the PDN connection that released it, if the PDN connection reattaches before the timer expires |
| Round-Robin | Indicates if the round robin selection mechanism to allocate the IP address is enabled |
| Priority | Indicates the priority value of an IP address pool |
qos-profile
Syntax
- qos-profile [profile-name]
Context
- [Tree] show mobile-gateway profile qos-profile
Description
This command is used to display the contents of the specified QoS profile.
Parameters
- profile-name
- specifies the name of the QoS profile
Output
The following output example shows QoS profile information.
Example output QoS profile
# show mobile-gateway profile qos-profile "qosProf1"
===============================================================================
Qos profile
===============================================================================
Profile name : qosProf1
qci : 9 arp : 11
ul-ambr : 500000 kb* dl-ambr : 600000 kb*
-------------------------------------------------------------------------------
Number of profiles : 1
===============================================================================radius
Syntax
- radius [profile-name]
Context
- [Tree] show mobile-gateway profile radius
Description
This command displays RADIUS profile information.
Parameters
- profile-name
- displays information about the specified existing RADIUS profile
Output
The following output example shows RADIUS profile information.
Example output RADIUS profile
# show mobile-gateway profile radius
===============================================================================
Radius profile
===============================================================================
Profile name : default
Description : N/A
Auth Prob Interval : 0 secs Server Dead Time : 300 secs
Auth Retry Timeout : 4 secs Auth Retry Count : 3
Acct Retry Timeout : 4 secs Acct Retry Count : 3
Apn Acct On/Off Init Intrvl: 0 Apn Acct On Retry Interval : 0
Max Peer Reselections Count: 3
NAS Port Type : 15
-------------------------------------------------------------------------------
Number of Radius profiles : 1
===============================================================================radius-group
Syntax
- radius-group [radius-group-name]
Context
- [Tree] show mobile-gateway profile radius-group
Description
This command displays RADIUS group information.
Parameters
- radius-group-name
- displays information about the specified existing RADIUS group
Output
The following output example shows RADIUS group information.
Example output RADIUS group profile
# show mobile-gateway profile radius-group "Radius Group"
===============================================================================
Radius Group profile
===============================================================================
Group name : Radius Group
Description : acctAuthBasic
Interface : pgwicr-ra* Router : vprn20005
Auth Server Port : 1812 Acct Server Port : 1813
Interim Update Interval : disabled Server Type : both
Radius Profile : Profile1 Ignore Acct Resp : disabled
Transaction Based LB : disabled
Use Acct-interim-avp-optio*: enabled Use Disconnect-ack-avp-opt*: enabled
Use Disconnect-nak-avp-opt*: enabled
Limit User Name Length : enabled
via-up-function
APN : Nokia
up-peer-ip-address : 0.0.0.0
radius-avp-options
-------------------------------------------------------------------------------
service-type : include framed-protocol : include
calling-station-id : include nas-port-type : include
acct-delay-time : exclude acct-authentic : include
3gpp-imsi : include 3gpp-charging-Id : include
3gpp-pdp-type : include 3gpp-gprs-negotiated-qos-p*: include
3gpp-sgsn-address : include 3gpp-ggsn-address : include
3gpp-imsi-mcc-mnc : exclude 3gpp-ggsn-mcc-mnc : include
3gpp-nsapi : include 3gpp-session-stop-indicator: include
3gpp-selection-mode : include 3gpp-charging-characterist*: include
3gpp-sgsn-ipv6-address : include 3gpp-ggsn-ipv6-address : include
3gpp-sgsn-mcc-mnc : include 3gpp-imeisv : include
3gpp-rat-type : include 3gpp-user-location-info : include
3gpp-ms-timezone : include served-mdn : exclude
alc-subsc-id-str : exclude alc-subsc-prof-str : exclude
alc-sla-prof-str : exclude nas-port-id : exclude
acct-session-id : include event-timestamp : exclude
user-name : include
nas-identifier : exclude class : exclude
framed-ip-address : include framed-ip-netmask : include
framed-ipv6-prefix : include framed-interface-id : exclude
acct-session-time : include
acct-input-gigawords : include acct-output-gigawords : include
acct-input-octets : include acct-output-octets : include
acct-input-packets : exclude acct-output-packets : exclude
called-station-id-apn-in-o*: include
acct-session-id-in-on-off-*: include
called-station-id : include 3gpp-allocate-ip-type : include
acct-interim-avp-options
-------------------------------------------------------------------------------
service-type : exclude framed-protocol : exclude
calling-station-id : include nas-port-type : include
acct-delay-time : exclude acct-authentic : exclude
3gpp-imsi : include 3gpp-charging-Id : include
3gpp-pdp-type : include 3gpp-gprs-negotiated-qos-p*: include
3gpp-sgsn-address : include 3gpp-ggsn-address : include
3gpp-imsi-mcc-mnc : exclude 3gpp-ggsn-mcc-mnc : exclude
3gpp-nsapi : include
3gpp-selection-mode : include 3gpp-charging-characterist*: include
3gpp-sgsn-ipv6-address : exclude 3gpp-ggsn-ipv6-address : exclude
3gpp-sgsn-mcc-mnc : exclude 3gpp-imeisv : exclude
3gpp-rat-type : exclude 3gpp-user-location-info : exclude
3gpp-ms-timezone : exclude nas-port-id : exclude
user-name : include event-timestamp : exclude
nas-identifier : exclude class : exclude
nas-ip-address : include nas-ipv6-address : exclude
framed-ip-address : include
framed-ipv6-prefix : include framed-interface-id : exclude
acct-session-time : include
acct-input-gigawords : include acct-output-gigawords : include
acct-input-octets : include acct-output-octets : include
acct-input-packets : exclude acct-output-packets : exclude
called-station-id : include
disconnect-ack-avp-options
-------------------------------------------------------------------------------
proxy-state : include acct-terminate-cause : include
event-timestamp : include
disconnect-nak-avp-options
-------------------------------------------------------------------------------
proxy-state : include error-cause : include
Peer Address : 10.23.12.2
Priority : 3 Radius Profile : Profile1
Auth Server Port : 1812 Acct Server Port : 1813
Admin State : up Failure Detection Time : 10 secs
Peer Address : 10.23.14.2
Priority : 2 Radius Profile : Profile1
Auth Server Port : 1812 Acct Server Port : 1813
Admin State : up Failure Detection Time : 10 secs
Peer Address : 10.23.11.2
Priority : 1 Radius Profile : Profile1
Auth Server Port : 1812 Acct Server Port : 1813
Admin State : up Failure Detection Time : 10 secs
-------------------------------------------------------------------------------
Number of Radius Groups: 1
===============================================================================
* indicates that the corresponding row element may have been truncated.tai-lai-list
Syntax
- tai-lai-list [tai-lai-list-name]
Context
- [Tree] show mobile-gateway profile tai-lai-list
Description
This command displays TAI LAI list profile information.
Parameters
- tai-lai-list-name
- displays information about the specified existing TAI LAI list profile, up to 32 characters
Output
The following output example shows TAI LAI list profile information, and Show mobile profile TAI LAI list output fields describes the output fields.
Example output TAI LAI list profile
# show mobile-gateway profile tai-lai-list nokia-smf-tai-list
===============================================================================
TAI LAI List
===============================================================================
-------------------------------------------------------------------------------
List Name : Nokia-smf-tai-list
-------------------------------------------------------------------------------
MCC MNC TAC/LAI TAC-RANGE TAC-RANGE
START END
-------------------------------------------------------------------------------
202 010 0x02ae 0x03ae
202 010 0x01ae 0x01ae
Number of TAI-LAI entries : 2
-------------------------------------------------------------------------------
Number of TAI-LAI lists : 1
===============================================================================| Label | Description |
|---|---|
| List Name | The TAI LAI list name |
| MCC | The MCC value |
| MNC | The MNC value |
| TAC/LAI | The TAC/LAI value |
| TAC-RANGE START | The TAC range start value |
| TAC-RANGE END | The TAC range end value |
| Number of TAI-LAI entries | The number of TAI LAI entries for the list |
| Number of TAI-LAI lists | The number of TAI LAI lists displayed |
system
Syntax
- system [gateway gw-id | group group-number | vm vm-id] [summary]
- system [call-insight]
Context
- [Tree] show mobile-gateway system
Description
This command displays mobile gateway system information.
Parameters
- gw-id
- specifies the gateway ID
- group-number
- specifies the group number
- vm-id
- specifies the VM ID
- summary
- shows aggregated statistics per-peer level
Output
The following output examples show system information and Show mobile gateway system information describes the output fields.
- Example output system information (one-to-one redundancy)
- Example output system information (many-to-many redundancy)
Example output system information (one-to-one redundancy)
# show mobile-gateway system
===============================================================================
Mobile gateway system
===============================================================================
Use-fixed-udp-src-port : Disabled
Ue-fragmented-packets-handling : Disabled
ttc-accuracy : false
GTP-U Source Port Dist : Disabled
-------------------------------------------------------------------------------
Gateway : 1 Instance-type : None
Admin State : Down Oper state : Down
Suspended : No Suspended Since : N/A
Restart counter : N/A EPC Node :
Aa-grp/Part-id : 0/0 Def app profile :
parent-ctl-cc-na*:
Admin Uptime : N/A Gateway Uptime : N/A
-------------------------------------------------------------------------------
Number of gateways : 1
===============================================================================
* indicates that the corresponding row element may have been truncated. Example output system information (many-to-many redundancy)
# show mobile-gateway system
===============================================================================
Mobile gateway system
===============================================================================
===========
Use-fixed-udp-src-port : Disabled
Ue-fragmented-packets-handling : Disabled
ttc-accuracy : false
GTP-U Source Port Dist : Disabled
-------------------------------------------------------------------------------
Gateway : 1 Instance-type : control
Admin State : Up Oper state : Up
Suspended : No Suspended Since : N/A
Restart counter : 1 EPC Node : 310.150.PGW.1.1.1
Aa-grp/Part-id : 0/0 Def app profile :
parent-ctl-cc-na*:
Admin Uptime : 03/14/2022 11:09:41 Gateway Uptime : 03/14/2022 11:09:41
PFCP Recover Time: 03/14/2022 11:09:41 UTC 3856244981#
Group : 1
Admin State : Up Oper state : Up
Override profile : N/A
Group Uptime : 03/14/2022 11:09:41
Redundancy : one-to-one Red State : Hot
Switch over count: 0 Switch over time : N/A
Switch over state: N/A
PCMD Profile : inherit PCMD oper. state : down
VM : 1/3 Role/Red State : working/active
VM : 1/4 Role/Red State : protect/standby
-------------------------------------------------------------------------------
Number of gateways : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
# indicates the number of seconds elapsed from epoch January 1 1900.| Label | Description |
|---|---|
| Use-fixed-udp-src-port |
Indicates if a fixed UDP source port is used Enabled or disabled (default) |
| Ue-fragmented-packets-handling |
Indicates if the IP packet reassembly of the user-level traffic for packet classification is used Enabled or disabled (default) |
| ttc-accuracy | TTC accuracy optimization |
| GTP-U Source Port Dist | Selects a UDP source port for GTP-U packets |
| Gateway | Gateway ID (1 to 8) |
| Instance type | User-plane node (UPF/SGW-U/PGW-U, combined SGW-U/PGW-U) Control-plane node (SMF/SGW-C/PGW-C, combined SGW-C/PGW-C) |
| Admin State | The administratively applied state of the gateway (Up or Down) |
| Oper State | The operational state of the gateway (Up or Down) |
| Suspend | Indicates if the gateway is in a suspended state, in which case it does not accept new session, but continues to support call-flow on existing sessions |
| Suspend since | The time at which the gateway was suspended |
| Restart counter | Restart counter value |
| EPC Node | EPC node name; can be 31 characters maximum composed of the following: <MCC>.<MNC>.<SGW|PGW|ePDG|TWAG>.<Region String>.<Group Id>.<Node Id> |
| AA-grp/Part-id | The AA group/partition ID assigned to the mobile-gateway system |
| Def app profile | The default AA application profile assigned to the mobile-gateway system |
| parent-ctl-cc-na | The optional parental control ASO charging characteristic name, when the AA group and default application profile are configured |
| Admin Uptime | Time at which the gateway was administratively up |
| Gateway Uptime | Time the gateway was operationally up |
| PFCP Recover Time |
Time of the PFCP recovery Note: It is displayed only in case CUPS is set up. |
| Group | Mobile-gateway system group number (1 to 8) |
| Admin State | The administratively applied state of the group (up or down) |
| Oper state | Operational state of the group (up, down, in transition, and scale-in in progress) |
| Override profile | Indicates if an override profile is configured, or not, for each group for GTP-U redirection |
| Group Uptime | Time at which the group was operationally up |
| Red State | Redundancy state (hot or cold) |
| Switch over count | Indicates for the group, the number of switchovers for each {active to standby} transition of the VM/Card |
| Switch over time | Time of the last switchover |
| Switch over state | The state of the switchover |
| Resource pool | The resource pool assigned to the group defines the VM resources (cards) and the redundancy method used for the group |
| Redundancy |
Many-to-many ("M" active VMs are configured to have "N" standby/spares to provide HOT redundancy) One-to-one (each group is configured to provide HOT redundancy per VM/Card) |
| PCMD Profile |
Indicates if the group inherits the PCMD profile: inherit — the PCMD profile configured in the config mobile profile pcmd context is applied to the group none — PCMD records are not generated for this group |
| PCMD Oper state | Operational state of the PCMD (up or down) |
| Card/VM | Card/VM slot number |
| Role/Red state | Indicates the working/active or protect/standby state of the VM/Card |