router command reference
router hierarchy descriptions
This section provides the following router hierarchy descriptions:
configure router command hierarchy
configure
— router
— interface
— ip-reassembly
— monitor-mc-redirect
— active-mg
router command descriptions
This section provides the following router command descriptions:
configure router command descriptions
ip-reassembly
Syntax
- ip-reassembly port-name
- no ip-reassembly
Context
- [Tree] configure router interface ip-reassembly
Description
This command configures the virtual ISA used for IP reassembly on this interface.
The no form of this command removes the configuration.
Parameters
- port-name
- Specifies the port name.
- port-id
- Specifies the configured port ID.
monitor-mc-redirect
Syntax
- monitor-mc-redirect high-threshold high-threshold low-threshold low-threshold
- no monitor-mc-redirect
Context
- [Tree] configure router interface monitor-mc-redirect
Description
This command configures to monitor traffic on the interface for the mc-redirect tunnel.
The no form of this command reverts to the default.
Default
monitor-mc-redirect high-threshold 1000 low threshold 500
Parameters
- high-threshold
- Specifies the high threshold value in number of packets.
- low-threshold
- Specifies the low threshold value in number of packets.
active-mg
Syntax
- active-mg vm-id
- no active-mg
Context
- [Tree] configure router policy-options policy-statement entry from active-mg
Description
This command configures the route policy entry to include active VMs. An MG group-specific VM is used to advertise and update the next-hop of an active VM during inter-VM failover.
The no form of this command removes the active SM-VM associated with the route policy entry.
Default
no active-mg
Parameters
- vm-id
- Specifies the SM-VM ID to include for the route policy.