virtual-fabric command reference

virtual-fabric command descriptions

This section provides the following virtual-fabric command descriptions:

traceroute virtual-fabric command descriptions

virtual-fabric

Syntax
  • virtual-fabric [control | data] vm vm-id [vm-source vmsource-id] [fabric-number fabric-number]
Context
  • [Tree] traceroute virtual-fabric
Description

This command traces fabric routes from any card to any other card on any fabric. By default, tracing starts from the active OAM card on control fabric 1.

Parameters
control
Specifies the CSF information.
data
Specifies the DSF information.
vm-id
Specifies the ID of the target VM.
Values: 1 to 20 | A | B
vmsource-id
Specifies the ID of the source VM.
Values: 1 to 20 | A | B
fabric-number
Specifies the switch fabric number.
Values: 1 (for CSF1 and DSF1) | 2 (for CSF2 and DSF2)
Default: 1
Output

The following output example shows the tracing of the packet route.

Output of packet route
# traceroute virtual-fabric control vm 2 vm-source 3 fabric-number 1
Control Fabric-1, VM 3: 
traceroute to 192.168.1.2, 16 hops max: 
  1  192.168.3.254  0.359 ms 
  2  10.0.0.2  0.333 ms 
  3  192.168.1.2  0.304 ms