Procedures for shelf object configuration
To configure an 1830 VWM shelf
To configure the device chassis mode
To configure a VWM shelf for a 7210 SAS
To configure dry contact sensors
To configure the IMM card type on a 7210 SAS-R
To configure switch fabric multicast ingress replication rates
To configure timing synchronization
To configure the IEEE 1588 PTP clock on a 7210 SAS, 7250 IXR, 7450 ESS, or 7750 SR
To configure the IEEE 1588 PTP peer of a 7210 SAS, 7250 IXR, 7450 ESS, or 7750 SR
To configure IEEE 1588 PTP ports on a 7210 SAS, 7250 IXR, 7450 ESS, 7750 SR, or 7950 XRS
To configure alternate profiles under IEEE PTP Clock on a 7250 IXR, 7450 ESS, 7750 SR, or 7950 XRS
To associate an alternate profile to an IEEE PTP Port on a 7250 IXR, 7450 ESS, 7750 SR, or 7950 XRS
To configure an IEEE 1588 PTP clock on a 7705 SAR
To configure an IEC/IEEE 61850-9-3 PTP clock on a 7705 SAR
To configure alternate profiles under IEEE PTP Clock on a 7705 SAR
To associate an alternate profile to an IEEE PTP Port on a 7705 SAR
To configure an IEEE 1588 PTP port on a 7705 SAR
To configure system time on a 7705 SAR
To configure SNTP on a 7705 SAR
To configure VPLS scalability on a 7705 SAR
To configure NTP on supported devices
To configure NTP on 1830 VWM OSU devices
To configure SCADA on a 7705 SAR
To configure voice conference bridging on a 7705 SAR
To configure a 7705 SAR MW link
To configure a 7705 SAR MW link member
To configure 7705 SAR auxiliary alarm definitions
To manage an OmniSwitch running configuration
To configure OmniSwitch health monitoring
To configure a CCM on a 7950 XRS-20
To manage the internal fan on a 7210 SAS-D
To enable fan speed monitoring on a 7x50 device
To configure a power supply tray
To configure a power management zone
To configure a variable power supply APEQ
To configure optical protection switching on an 1830 VWM OPS shelf
To configure bi-directional protection switching on an 1830 VWM OPS shelf
To configure an OPS protection audit entity on an 1830 VWM OSU shelf