Procedures for port configuration
To configure Ethernet LAN ports on the 1830 VWM OSU and 1830 VWM SMM
To configure connector ports and breakout ports
To configure LLDP MED Network Policy
To configure a cellular port on a 7705 SAR-Hm
To configure a WLAN port on a 7705 SAR-Hm
To migrate SAPs from access mode to hybrid mode
To configure the NFM-P to retain non-default port MTU values
To copy or move L2 SAPs between ports
To copy or move L2 access interface SAPs between services
To move L3 SAPs within or between ports or LAGs on the same NE
To move L3 subscriber interface SAPs between ports on the same NE
To configure bandwidth CAC on an access SAP for services or a LAG
To add a queue group to an Ethernet port
To configure queue group scheduler overrides
To configure an HSMDA override
To configure a 7210 SAS-M channelized TDM DS1 or E1 port
To assign QoS policies to a 7210 SAS Ethernet port
To configure a virtual Ethernet port on a 7705 SAR 2-port ring MDA
To configure Ethernet Bandwidth Notification on a 7705 SAR Ethernet port
To configure PoE ports on a 7210 SAS
To enable or disable hardware timestamps for ports on the 7210 SAS
To configure MAC or VLAN authentication
To configure PoE ports on a 7705 SAR
To configure GPS on a 7705 SAR
To configure a 7705 SAR ASAP channelized TDM port
To configure a channelized TDM DS1 or E1 port
To configure OmniSwitch Ethernet ports
To configure OmniSwitch PoE Ports