Operate and maintain
Documents under this category provide functional descriptions and procedures for configuring, operating, and maintaining 7705 SAR Gen 2 routers.
- Basic System Configuration Guide
  This guide describes file system management, boot option file (BOF) configuration, basic system management configuration, node timing, and synchronization functions.
- Interface Configuration Guide
  This guide describes how to provision Input/Output Modules (IOMs), Media Dependent Adapters (MDAs), connectors, and ports.
- Layer 2 Services and EVPN Guide
  This guide describes Layer 2 service and Ethernet Virtual Private Network (EVPN) functionality and provides examples to configure and implement Virtual Leased Lines (VLLs), Virtual Private LAN Service (VPLS), and EVPN.
- Layer 3 Services Guide: IES and VPRN
  This guide describes Layer 3 service functionality and provides examples to configure and implement Internet Enhanced Services (IES) and Virtual Private Routed Network (VPRN) services.
- MD-CLI User Guide
  This guide provides information about how to use the MD-CLI.
- MPLS Guide
  This guide provides an overview of Multiprotocol Label Switching (MPLS), Resource Reservation Protocol (RSVP), and Label Distribution Protocol (LDP) and provides configuration examples.
- MS-ISA and ESA Guide
  This guide provides an overview of services provided by integrated service adapters and extended service appliances, such as IPsec and Network Address Translation (NAT), and provides configuration examples.
- Multicast Routing Protocols Guide
  This guide provides an overview of multicast routing concepts and provides configuration examples for Internet Group Management Protocol (IGMP), Multicast Listener Discovery (MLD), and Protocol Independent Multicast (PIM).
- Quality of Service Guide
  This guide provides an overview of Quality of Service (QoS) policy management and provides configuration examples.
- Router Configuration Guide
  This guide dscribes logical IP routing interfaces and associated attributes such as IP addresses, as well as IP and MAC-based filtering, Virtual Router Redundancy Protocol (VRRP), and cflowd.
- Segment Routing and PCE User Guide
  This guide provides an overview of segment routing features with MPLS (SR-MPLS) data path encapsulations and path computation element (PCE) features.
- Services Overview Guide
  This guide provides a general overview of functionality provided by the routers and describes how to configure service parameters such as Service Access Points (SAPs), Service Distribution Points (SDPs), customer information, and user services.
- System Management Guide
  This guide describes system security features, SNMP and NETCONF features, and event and accounting logs; the guide also covers basic tasks such as configuring management access filters, passwords, and user profiles.
- Unicast Routing Protocols Guide
  This guide provides an overview of unicast routing concepts and provides configuration examples for Routing Information Protocol (RIP), Open Shortest Path First (OSPF), Intermediate-system-to-intermediate-system (IS-IS), and Border Gateway Protocol (BGP) routing protocols; also provides an overview of route policies and configuration examples.

Configuration process overview

The following figure shows the process to provision chassis slots, cards, MDAs, and ports.

Figure 1. Slot, card, MDA, port configuration, and implementation flow

Configuration notes

The following information describes provisioning restrictions.

If a card or MDA type is installed in a slot provisioned for a different type, the card does not initialize.
A card or MDA installed in an unprovisioned slot remains administratively and operationally down until the card type and MDA are specified.
Ports cannot be provisioned until the slot, card and MDA type are specified.

April 25, 2025