pw-port commands
configure
— pw-port number
— apply-groups reference
— apply-groups-exclude reference
— description string
— dot1q-etype string
— encap-type keyword
— epipe reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— down-on-peer-tldp-pw-status-faults boolean
— egress
— shaper
— intermediate-destination-id string
— virtual-port string
— fpe-id reference
— monitor-oper-group reference
— oper-up-on-mh-standby boolean
— oper-group reference
— qinq-etype string
— sdp reference
— admin-state keyword
— adv-service-mtu number
— apply-groups reference
— apply-groups-exclude reference
— control-word boolean
— egress
— shaper
— intermediate-destination-id string
— pw-sap-secondary-shaper string
— virtual-port string
— vc-label number
— entropy-label boolean
— ingress
— vc-label number
— monitor-oper-group reference
— vc-id number
— vc-type keyword
— vlan-vc-tag number
pw-port command descriptions
pw-port [pw-port-id] number
[pw-port-id] number
description string
Synopsis | Text description | |
Context | configure pw-port number description string | |
Tree | description | |
String Length | 1 to 255 | |
Default | PW Port | |
Introduced | 16.0.R4 | |
Platforms | All |
dot1q-etype string
Synopsis | Dot1q Ethertype on the PW port | |
Context | configure pw-port number dot1q-etype string | |
Tree | dot1q-etype | |
Default | 33024 | |
Introduced | 16.0.R4 | |
Platforms | All |
encap-type keyword
Synopsis | Encap type of the pseudo-wire port | |
Context | configure pw-port number encap-type keyword | |
Tree | encap-type | |
Options | ||
Default | dot1q | |
Introduced | 16.0.R4 | |
Platforms | All |
epipe [service-name] reference
[service-name] reference
admin-state keyword
Synopsis | Administrative state of the pseudowire port | |
Context | configure pw-port number epipe reference admin-state keyword | |
Tree | admin-state | |
Options | ||
Default | enable | |
Introduced | 16.0.R4 | |
Platforms | All |
down-on-peer-tldp-pw-status-faults boolean
Synopsis | Force PW port to go down for certain PW status bits | |
Context | configure pw-port number epipe reference down-on-peer-tldp-pw-status-faults boolean | |
Tree | down-on-peer-tldp-pw-status-faults | |
Description | When configured to true, the router causes the PW port configured on an Epipe to go locally operationally down if any of the following status bits are received on a mate spoke SDP across an FPE:
When configured to false, the mate PW status fault bits are not taken into account in the operational state of the PW port. | |
Default | false | |
Introduced | 22.2.R1 | |
Platforms | All |
egress
shaper
intermediate-destination-id string
Synopsis | Intermediate destination ID for ESM PW SAPs | |
Context | configure pw-port number epipe reference egress shaper intermediate-destination-id string | |
Tree | intermediate-destination-id | |
String Length | 1 to 32 | |
Introduced | 16.0.R4 | |
Platforms | All |
virtual-port string
Synopsis | Virtual port name of the egress shaper | |
Context | configure pw-port number epipe reference egress shaper virtual-port string | |
Tree | virtual-port | |
String Length | 1 to 32 | |
Introduced | 16.0.R4 | |
Platforms | All |
fpe-id reference
monitor-oper-group reference
Synopsis | Name of the operational group to monitor | |
Context | configure pw-port number epipe reference monitor-oper-group reference | |
Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Introduced | 16.0.R4 | |
Platforms | All |
oper-up-on-mh-standby boolean
Synopsis | Sets PW port to operationally up on MH standby | |
Context | configure pw-port number epipe reference oper-up-on-mh-standby boolean | |
Tree | oper-up-on-mh-standby | |
Description | When configured to true, this command allows the PW port to remain operationally up on the non-DF PE and all the PW SAPs contained in the PW port. The PW port status shows operationally up status with a flag MH Standby. When configured to false, this command causes the PW port to remain operationally down on the non-DF PE and all the PW SAPs contained in the PW port. | |
Default | false | |
Introduced | 22.2.R1 | |
Platforms | All |
oper-group reference
Synopsis | Operational group ID | |
Context | configure pw-port number oper-group reference | |
Tree | oper-group | |
Reference | configure service oper-group string | |
Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
qinq-etype string
Synopsis | QinQ Ethertype encapsulation on the PW port | |
Context | configure pw-port number qinq-etype string | |
Tree | qinq-etype | |
Default | 33024 | |
Introduced | 16.0.R4 | |
Platforms | All |
sdp [sdp-id] reference
[sdp-id] reference
admin-state keyword
Synopsis | Administrative state of the pseudowire port | |
Context | configure pw-port number sdp reference admin-state keyword | |
Tree | admin-state | |
Options | ||
Default | disable | |
Introduced | 16.0.R4 | |
Platforms | All |
adv-service-mtu number
Synopsis | Service MTU size to be used | |
Context | configure pw-port number sdp reference adv-service-mtu number | |
Tree | adv-service-mtu | |
Range | 0 to 9782 | |
Units | bytes | |
Introduced | 21.7.R1 | |
Platforms |
All |
control-word boolean
Synopsis | Allow control word bit setting in the label message | |
Context | configure pw-port number sdp reference control-word boolean | |
Tree | control-word | |
Default | false | |
Introduced | 19.10.R1 | |
Platforms | All |
egress
shaper
intermediate-destination-id string
Synopsis | Intermediate destination ID applicable to ESM PW SAPs | |
Context | configure pw-port number sdp reference egress shaper intermediate-destination-id string | |
Tree | intermediate-destination-id | |
String Length | 1 to 32 | |
Introduced | 16.0.R4 | |
Platforms | All |
pw-sap-secondary-shaper string
Synopsis | Secondary shaper applicable to PW SAPs | |
Context | configure pw-port number sdp reference egress shaper pw-sap-secondary-shaper string | |
Tree | pw-sap-secondary-shaper | |
String Length | 1 to 32 | |
Introduced | 16.0.R4 | |
Platforms | All |
virtual-port string
Synopsis | Virtual port applicable to all PW SAPs | |
Context | configure pw-port number sdp reference egress shaper virtual-port string | |
Tree | virtual-port | |
String Length | 1 to 32 | |
Introduced | 16.0.R4 | |
Platforms | All |
vc-label number
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Egress VC label representing the PW port | |
Context | configure pw-port number sdp reference egress vc-label number | |
Tree | vc-label | |
Range | 16 to 1048575 | |
Introduced | 16.0.R4 | |
Platforms | All |
entropy-label boolean
Synopsis | Enable entropy level insertion on the PW port | |
Context | configure pw-port number sdp reference entropy-label boolean | |
Tree | entropy-label | |
Description | When configured to true, the entropy label and ELI are inserted in packets for which at least one LSP in the stack for the far-end of the tunnel used by the service has advertised entropy label capability.
When configured to false, entropy label insertion on the PW port is not allowed. The entropy label is only applicable to PW ports bound to a static port; it is not applicable to ports using an FPE. | |
Default | false | |
Introduced | 21.5.R1 | |
Platforms | All |
ingress
vc-label number
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Ingress VC label representing the PW-port | |
Context | configure pw-port number sdp reference ingress vc-label number | |
Tree | vc-label | |
Range | 1 to 1048575 | |
Introduced | 16.0.R4 | |
Platforms | All |
monitor-oper-group reference
Synopsis | Name of the operational group to monitor | |
Context | configure pw-port number sdp reference monitor-oper-group reference | |
Tree | monitor-oper-group | |
Reference | configure service oper-group string | |
Introduced | 16.0.R4 | |
Platforms | All |
vc-id number
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Virtual Circuit ID signaled to the peer | |
Context | configure pw-port number sdp reference vc-id number | |
Tree | vc-id | |
Range | 1 to 4294967295 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R4 | |
Platforms | All |
vc-type keyword
vlan-vc-tag number
Synopsis | VLAN VC tag | |
Context | configure pw-port number sdp reference vlan-vc-tag number | |
Tree | vlan-vc-tag | |
Range | 0 to 4094 | |
Introduced | 16.0.R4 | |
Platforms | All |