test-oam commands
configure
— test-oam
— apply-groups reference
— apply-groups-exclude reference
— icmp
— ipv6
— apply-groups reference
— apply-groups-exclude reference
— length-field boolean
— maximum-original-datagram boolean
— ping-template string
— apply-groups reference
— apply-groups-exclude reference
— description string
— dot1p number
— dscp keyword
— failure-threshold number
— interval number
— reactivation-failure-threshold number
— reactivation-interval number
— reactivation-threshold number
— reactivation-timeout number
— size number
— timeout number
— ttl number
— link-measurement
— measurement-template string
— admin-state keyword
— aggregate-sample-window
— multiplier number
— threshold
— absolute number
— relative number
— window-integrity number
— apply-groups reference
— apply-groups-exclude reference
— delay keyword
— description string
— interval number
— last-reported-delay-hold number
— reporting boolean
— sample-window
— multiplier number
— threshold
— absolute number
— relative number
— window-integrity number
— twamp-light
— allow-egress-remark-dscp boolean
— allow-ipv6-udp-checksum-zero boolean
— dest-udp-port number
— dscp keyword
— fc keyword
— ipv6-destination-discovery
— admin-state keyword
— discovery-interval number
— discovery-timer number
— update-interval number
— pad-tlv-size number
— profile keyword
— return-path
— link boolean
— src-udp-port number
— timestamp-format keyword
— ttl number
— unidirectional-measurement keyword
— mpls
— apply-groups reference
— apply-groups-exclude reference
— echo-request-downstream-map keyword
— timestamp-format keyword
— mpls-dm
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— service-activation-testhead
— acceptance-criteria-template string
— apply-groups reference
— apply-groups-exclude reference
— cir-threshold number
— delay-threshold number
— delay-var-threshold number
— description string
— loss-threshold decimal-number
— loss-threshold-policing decimal-number
— m-factor number
— pir-threshold number
— apply-groups reference
— apply-groups-exclude reference
— frame-size-template string
— apply-groups reference
— apply-groups-exclude reference
— size-a number
— size-b number
— size-c number
— size-d number
— size-e number
— size-f number
— size-g number
— size-h number
— size-u number
— service-test string
— accounting-policy reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— service-stream number
— acceptance-criteria-template reference
— admin-state keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— frame-mix
— frame-size-template reference
— sequence string
— frame-payload
— data-pattern
— repeat (hex-string | number)
— ethernet
— c-tag
— discard-eligible boolean
— dot1p number
— dst-mac string
— eth-cfm
— source
— ma-admin-name reference
— md-admin-name reference
— mep-id number
— s-tag
— discard-eligible boolean
— dot1p number
— rate-cir number
— rate-pir number
— service-stream-completion-notification boolean
— test-types
— cir boolean
— cir-pir boolean
— performance boolean
— policing boolean
— service-test-completion-notification boolean
— stream-run-type keyword
— test-duration
— cir
— minutes-seconds string
— cir-pir
— minutes-seconds string
— performance
— hours-minutes-seconds string
— policing
— minutes-seconds string
— twamp
— apply-groups reference
— apply-groups-exclude reference
— server
— admin-state keyword
— allow-ipv6-udp-checksum-zero boolean
— apply-groups reference
— apply-groups-exclude reference
— enforce-test-session-start-time boolean
— inactivity-timeout number
— max-connections number
— max-sessions number
— prefix (ipv4-prefix | ipv6-prefix)
— apply-groups reference
— apply-groups-exclude reference
— description string
— max-connections number
— max-sessions number
— twamp-light
— apply-groups reference
— apply-groups-exclude reference
— inactivity-timeout number
— source-udp-port-pools
— port number
— apply-groups reference
— apply-groups-exclude reference
— pool-type keyword
test-oam command descriptions
test-oam
icmp
ipv6
length-field boolean
Synopsis | Use length field in ICMPv6 responses | |
Context | configure test-oam icmp ipv6 length-field boolean | |
Tree | length-field | |
Default | false | |
Introduced | 22.7.R1 | |
Platforms | All |
maximum-original-datagram boolean
Synopsis | ICMPv6 traceroute responses with largest datagram | |
Context | configure test-oam icmp ipv6 maximum-original-datagram boolean | |
Tree | maximum-original-datagram | |
Description | When configured to true, this command enables the original datagram field of the ICMPv6 error message to be a maximum of 1232 bytes. When configured to false, the original datagram field of the ICMPv6 error message smaller than 1232 bytes be built smaller. | |
Default | false | |
Introduced | 22.7.R1 | |
Platforms | All |
ping-template [name] string
Synopsis | Enter the ping-template list instance | |
Context | configure test-oam icmp ping-template string | |
Tree | ping-template | |
Description | Commands in this context define ping timers and thresholds that verify connectivity and the the operational state of the IP interface. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
[name] string
Synopsis | Ping template name | |
Context | configure test-oam icmp ping-template string | |
Tree | ping-template | |
String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
Synopsis | Text description | |
Context | configure test-oam icmp ping-template string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
dot1p number
Synopsis | Dot1p in Ethernet header of outgoing ping packets | |
Context | configure test-oam icmp ping-template string dot1p number | |
Tree | dot1p | |
Range | 0 to 7 | |
Default | 7 | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
dscp keyword
Synopsis | DSCP value used in the outgoing ping packet | |
Context | configure test-oam icmp ping-template string dscp keyword | |
Tree | dscp | |
Options | ||
Default | nc1 | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
failure-threshold number
Synopsis | Failure threshold to declare inter-connectivity down | |
Context | configure test-oam icmp ping-template string failure-threshold number | |
Tree | failure-threshold | |
Range | 2 to 10 | |
Default | 3 | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interval number
Synopsis | Packet transmit interval | |
Context | configure test-oam icmp ping-template string interval number | |
Tree | interval | |
Range | 1 to 60 | |
Units | seconds | |
Default | 60 | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
reactivation-failure-threshold number
Synopsis | Threshold of consecutive failures at reactivation | |
Context | configure test-oam icmp ping-template string reactivation-failure-threshold number | |
Tree | reactivation-failure-threshold | |
Description | This command configures the number of consecutive failures that must occur when transmitting at the reactivation interval without success before the transmission interval is changed to the standard interval. | |
Range | 1 to 10 | |
Default | 4 | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
reactivation-interval number
Synopsis | Ping reactivation interval | |
Context | configure test-oam icmp ping-template string reactivation-interval number | |
Tree | reactivation-interval | |
Description | This command configures the packet transmit interval used when the IP interface becomes operationally down because of a ping template failure after receiving a successful response to the previous ICMP echo request. | |
Range | 1 to 60 | |
Units | seconds | |
Default | 1 | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
reactivation-threshold number
Synopsis | Success threshold to declare inter-connectivity up | |
Context | configure test-oam icmp ping-template string reactivation-threshold number | |
Tree | reactivation-threshold | |
Description | This command configures the minimum number of consecutive successful responses of ICMP replies that must occur before the IP interface transitions from operationally down (due to ping validation failure) to operationally up. This value is a stability metric intended to prevent flapping. | |
Range | 1 to 10 | |
Default | 3 | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
reactivation-timeout number
Synopsis | Reactivation wait time before packet is declared lost | |
Context | configure test-oam icmp ping-template string reactivation-timeout number | |
Tree | reactivation-timeout | |
Range | 1 to 60 | |
Units | seconds | |
Default | 1 | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
size number
Synopsis | Data field size of the outgoing ICMP echo packet | |
Context | configure test-oam icmp ping-template string size number | |
Tree | size | |
Range | 12 to 9786 | |
Units | octets | |
Default | 56 | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
timeout number
Synopsis | Wait time before ICMP echo request is declared lost | |
Context | configure test-oam icmp ping-template string timeout number | |
Tree | timeout | |
Range | 1 to 60 | |
Units | seconds | |
Default | 5 | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ttl number
Synopsis | TTL value for the outgoing ping packet | |
Context | configure test-oam icmp ping-template string ttl number | |
Tree | ttl | |
Description | This command configures the TTL value used in the outgoing ping packet. The tested interface must be directly connected on the same subnet. | |
Range | 1 to 255 | |
Default | 1 | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
link-measurement
Synopsis | Enter the link-measurement context | |
Context | configure test-oam link-measurement | |
Tree | link-measurement | |
Description | Commands in this context configure the link measurement template attributes that are inherited on associated IP interfaces for delay reporting to the routing engine. | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
measurement-template [template-name] string
Synopsis | Enter the measurement-template list instance | |
Context | configure test-oam link-measurement measurement-template string | |
Tree | measurement-template | |
Description | Commands in this context configure the attributes of the measurement template that can be assigned to an IP interface. Changes can be made without disabling the template, although some modifications cause the test on associated IP interfaces to terminate and restart. A measurement template can be removed if no interfaces reference it. | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
[template-name] string
Synopsis | Measurement template name | |
Context | configure test-oam link-measurement measurement-template string | |
Tree | measurement-template | |
String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
Synopsis | Administrative state of the measurement template | |
Context | configure test-oam link-measurement measurement-template string admin-state keyword | |
Tree | admin-state | |
Options | ||
Default | disable | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
aggregate-sample-window
Synopsis | Enter the aggregate-sample-window context | |
Context | configure test-oam link-measurement measurement-template string aggregate-sample-window | |
Tree | aggregate-sample-window | |
Description | Commands in this context configure the attributes of the aggregate sample window used with the measurement template assigned to an IP interface. The aggregate sample window is the collection of sample windows. | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
multiplier number
Synopsis | Number of sample windows in the aggregate sample window | |
Context | configure test-oam link-measurement measurement-template string aggregate-sample-window multiplier number | |
Tree | multiplier | |
Range | 1 to 12 | |
Default | 12 | |
Introduced | 21.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
threshold
Synopsis | Enter the threshold context | |
Context | configure test-oam link-measurement measurement-template string aggregate-sample-window threshold | |
Tree | threshold | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
absolute number
Synopsis | Absolute delta for delay measurement reporting | |
Context | configure test-oam link-measurement measurement-template string aggregate-sample-window threshold absolute number | |
Tree | absolute | |
Description | This command configures the absolute minimum delta by which a new delay measurement must differ from the previously reported measurement to be reported to the routing engine. If an absolute value is not configured the threshold is disabled. | |
Range | 1 to 100000 | |
Units | microseconds | |
Introduced | 21.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
relative number
Synopsis | Relative delta for measurement reporting | |
Context | configure test-oam link-measurement measurement-template string aggregate-sample-window threshold relative number | |
Tree | relative | |
Description | This command configures the relative minimum delta by which a new delay measurement must differ from the previously reported measurement to be reported to the routing engine. If a relative value is not configured, the threshold is disabled. | |
Range | 1 to 100 | |
Units | percent | |
Introduced | 21.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
window-integrity number
Synopsis | Sample percentage required for window integrity report | |
Context | configure test-oam link-measurement measurement-template string aggregate-sample-window window-integrity number | |
Tree | window-integrity | |
Description | This command configures the percentage value that is used to determine whether the aggregate sample window is integral, by comparing the number of samples received from the sample window to the percentage configured. The configured percentage translates to a required sample window count that must be included in the aggregate sample window. The number of samples is computed as follows: (window-integrity (%)) x (((aggregate-sample-window length (s)) / (sample-window length (s))) If the number of samples in the aggregate sample window is equal to or greater than the computed number of required samples, the sample window has integrity and the aggregate sample window result is compared to the configured sample window thresholds. If the count is less than the computed number of required samples, the aggregate sample window does not have integrity and the value is not considered as representative. In this case the aggregate sample window results are not compared to the configured sample window thresholds. If this parameter is not configured, integrity checking is disabled and all results are compared to the configured thresholds. | |
Range | 1 to 100 | |
Units | percent | |
Introduced | 21.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
delay keyword
Synopsis | Delay measurement statistic type | |
Context | configure test-oam link-measurement measurement-template string delay keyword | |
Tree | delay | |
Description | This command configures the type of delay measurement statistic used in the sample window and aggregate sample window. | |
Options | ||
Default | min | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
Synopsis | Text description | |
Context | configure test-oam link-measurement measurement-template string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
interval number
Synopsis | Interval between test packet transmissions | |
Context | configure test-oam link-measurement measurement-template string interval number | |
Tree | interval | |
Range | 1 to 10 | |
Units | seconds | |
Default | 1 | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
last-reported-delay-hold number
Synopsis | Time to wait to flush the last reported delay | |
Context | configure test-oam link-measurement measurement-template string last-reported-delay-hold number | |
Tree | last-reported-delay-hold | |
Description | This command configures the timer that specifies the wait time before the last reported delay measurement is flushed after a link measurement test enters the operationally down state. The aging timer delays the flushing of the last reported delay metric to the routing engine. This timer starts a countdown to zero when an administrative function causes the operational state of the test on that specific interface to transition from up to down. If the timer expires before the operational state transitions to up, the previously reported value is flushed. The Delay Measurement Last Reported indicates “Cleared”. The timestamp indicates the time of the clear event. The Triggered By indicates “Expired”. If the administrative state recovers to operationally up before the expiration of the timer, the previous reported value is not flushed. The aging timer does not apply to failure conditions that do not affect the administrative state of the interface, for example interface failure or routing changes. | |
Range | 0 | 1 to 86400 | |
Units | seconds | |
Default | 86400 | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
reporting boolean
Synopsis | Report behavior for values for the configured threshold | |
Context | configure test-oam link-measurement measurement-template string reporting boolean | |
Tree | reporting | |
Description | When configured to true, the system reports a reached threshold to the routing engine.Reaching a configured sample-window or aggregate-sample-window indicates a value of interest. When configured to false, values reaching thresholds are not reported to the routing engine. In both enabled and disabled cases, the sample-window and aggregate-sample-window information and computed values are stored on the node until overwriting occurs. | |
Default | true | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
sample-window
Synopsis | Enter the sample-window context | |
Context | configure test-oam link-measurement measurement-template string sample-window | |
Tree | sample-window | |
Description | Commands in this context configure sample window attributes used when the measurement template is assigned to an IP interface. The sample window is the collection of individual probe results over a defined period. | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
multiplier number
Synopsis | Multiplier of interval used for sample window length | |
Context | configure test-oam link-measurement measurement-template string sample-window multiplier number | |
Tree | multiplier | |
Description | This command configures the number of probe results that should be in the sample window. For example, a multiplier of 10 and an interval of 5 equals 50 probes being transmitted from an individual sample window. Consequently, 50 probe results are expected within the 50 second duration that the sample window is “In-progress”. | |
Range | 1 to 900 | |
Default | 10 | |
Introduced | 21.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
threshold
Synopsis | Enter the threshold context | |
Context | configure test-oam link-measurement measurement-template string sample-window threshold | |
Tree | threshold | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
absolute number
Synopsis | Absolute delta for delay measurement reporting | |
Context | configure test-oam link-measurement measurement-template string sample-window threshold absolute number | |
Tree | absolute | |
Description | This command configures the absolute minimum delta by which a new delay measurement must differ from the previously reported measurement to be reported to the routing engine. If an absolute value is not configured the threshold is disabled. | |
Range | 1 to 100000 | |
Units | microseconds | |
Introduced | 21.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
relative number
Synopsis | Relative delta for delay measurement reporting | |
Context | configure test-oam link-measurement measurement-template string sample-window threshold relative number | |
Tree | relative | |
Description | This command configures the relative minimum delta by which a new delay measurement must differ from the previously reported measurement to be reported to the routing engine. If a relative value is not configured, the threshold is disabled. | |
Range | 1 to 500 | |
Units | percent | |
Introduced | 21.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
window-integrity number
Synopsis | Sample percentage required for window integrity report | |
Context | configure test-oam link-measurement measurement-template string sample-window window-integrity number | |
Tree | window-integrity | |
Description | This command configures the percentage value that is used to determine whether the sample window has enough samples to be considered representative for that window (integrity), by comparing the number of samples received from the sample window to the percentage configured. The configured percentage considers the interval of probes and the length of the sample window to determine the number of packets required in the sample: (window-integrity (%)) x ((sample-window length (s)) / pps per test (interval)) If the count is less than the computed number of required samples, the sample window does not have integrity and the sample window results are not compared to configured sample window thresholds. If the count is equal to or greater than the computed number of required samples, the sample window has integrity and the aggregate sample window result is compared to the configured sample window thresholds. If the count is less than the computed number of required samples, the sample window does not have integrity and the value is not considered as representative. In this case the sample window results are not compared to the configured sample window thresholds. If this parameter is not configured, integrity checking is disabled and all results are compared to the configured thresholds. | |
Range | 1 to 100 | |
Units | percent | |
Introduced | 21.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
twamp-light
Synopsis | Enter the twamp-light context | |
Context | configure test-oam link-measurement measurement-template string twamp-light | |
Tree | twamp-light | |
Description | Commands in this context configure TWAMP Light attributes that are used with the measurement template when assigned to IP interfaces. | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
allow-egress-remark-dscp boolean
Synopsis | Allow overwrite of DSCP value by the egress QoS policy | |
Context | configure test-oam link-measurement measurement-template string twamp-light allow-egress-remark-dscp boolean | |
Tree | allow-egress-remark-dscp | |
Description | When configured to true, the egress QoS process is able to modify the DSCP based on the egress QoS configuration and expose the DSCP to egress DSCP processing rules. When configured to false, the egress QoS process uses the DSCP as configured and bypasses egress QoS DSCP marking. If the configure qos network egress remark-trusted force-egress-marking command is configured for the network egress QoS profile, the egress QoS process is applied and the DSCP can be overwritten regardless of the allow-egress-remark-dscp configuration. | |
Default | false | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
allow-ipv6-udp-checksum-zero boolean
Synopsis | Process IPv6 packets with UDP check sum zero | |
Context | configure test-oam link-measurement measurement-template string twamp-light allow-ipv6-udp-checksum-zero boolean | |
Tree | allow-ipv6-udp-checksum-zero | |
Description | When configured to true, processing of IPv6 packets that arrive with a UDP checksum of zero is allowed. The destination UDP ports that are registered as TWAMP Test packets in the template allow this behavior. When configured to false, IPv6 packets that arrive with a UDP checksum of zero are discarded. | |
Default | false | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
dest-udp-port number
Synopsis | Destination UDP port used by link measurement tests | |
Context | configure test-oam link-measurement measurement-template string twamp-light dest-udp-port number | |
Tree | dest-udp-port | |
Description | This command configures the destination UDP port on outbound TWAMP Light measurement packets sent from the session controller. The destination UDP port must match the UDP port value configured on the TWAMP Light reflector that responds to this specific TWAMP Light test. | |
Range | 1 to 65535 | |
Default | 862 | |
Introduced | 21.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
dscp keyword
Synopsis | DSCP copied to TWAMP Light echo request packet header | |
Context | configure test-oam link-measurement measurement-template string twamp-light dscp keyword | |
Tree | dscp | |
Description | This command configures the DSCP to be copied into the IP header of each TWAMP Light echo request packet launched for the test. | |
Options | ||
Default | nc1 | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
fc keyword
Synopsis | Forwarding class name for the TWAMP Light packets | |
Context | configure test-oam link-measurement measurement-template string twamp-light fc keyword | |
Tree | fc | |
Options | ||
Default | h1 | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ipv6-destination-discovery
Synopsis | Enter the ipv6-destination-discovery context | |
Context | configure test-oam link-measurement measurement-template string twamp-light ipv6-destination-discovery | |
Tree | ipv6-destination-discovery | |
Description | Commands in this context configure IPv6 discovery of a directly-connected IPv6 peer address. | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
admin-state keyword
Synopsis | Administrative state of IPv6 auto destination discovery | |
Context | configure test-oam link-measurement measurement-template string twamp-light ipv6-destination-discovery admin-state keyword | |
Tree | admin-state | |
Options | ||
Default | disable | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
discovery-interval number
Synopsis | Transmission frequency for discovery packets | |
Context | configure test-oam link-measurement measurement-template string twamp-light ipv6-destination-discovery discovery-interval number | |
Tree | discovery-interval | |
Description | This command configures transmission frequency of the discovery packet to the all-routers multicast group (ff02::2) to discover the link-local address of the peer. This frequency is used during the discover-timer interval. | |
Range | 1 to 10 | |
Units | seconds | |
Default | 10 | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
discovery-timer number
Synopsis | Maximum time to remain in the discovery phase | |
Context | configure test-oam link-measurement measurement-template string twamp-light ipv6-destination-discovery discovery-timer number | |
Tree | discovery-timer | |
Description | This command configures the amount of time to transmit peer discovery packets at the discovery-interval. The timer starts when the IPv6 protocols is enabled under the configure router interface if-attribute delay dynamic twamp-light ipv6 context. At the expiration of the discovery-interval or when a peer is discovered, whichever comes first, the probe interval changes to the value configured for the update-interval. | |
Range | 1 to 1800 | |
Units | seconds | |
Default | 60 | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
update-interval number
Synopsis | Transmission frequency to maintain the peer address | |
Context | configure test-oam link-measurement measurement-template string twamp-light ipv6-destination-discovery update-interval number | |
Tree | update-interval | |
Range | 0 | 1 to 3600 | |
Units | seconds | |
Default | 600 | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pad-tlv-size number
Synopsis | Optional PAD TLV size | |
Context | configure test-oam link-measurement measurement-template string twamp-light pad-tlv-size number | |
Tree | pad-tlv-size | |
Description | This command enables a STAMP PDU to include the PAD TLV. This increases the size of the STAMP PDU by the size of the added TLV. The PAD TLV includes an all zeros pattern. | |
Range | 4 to 9714 | |
Units | bytes | |
Introduced | 22.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
profile keyword
Synopsis | QoS profile for packet treatment in local node | |
Context | configure test-oam link-measurement measurement-template string twamp-light profile keyword | |
Tree | profile | |
Description | This command specifies if the packets should be treated as in or out of profile as they move through the local node. | |
Options | ||
Default | in | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
return-path
Synopsis | Enter the return-path context | |
Context | configure test-oam link-measurement measurement-template string twamp-light return-path | |
Tree | return-path | |
Description | Commands in this context configure the return-path TLV carried in the STAMP PDU. | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
link boolean
Synopsis | The Return Path sub-TLV specifying link | |
Context | configure test-oam link-measurement measurement-template string twamp-light return-path link boolean | |
Tree | link | |
Description | When configured to true, the system includes the return-path TLV link. The link sub-tlv instructs a Session-Reflector configured for type stamp to use the receiving logical IP interface for the transmission of the response packet from the reflector to the session-sender. The destination of the reflected packet must be installed in the forwarding table and reachable out the IP interface or the packet is dropped by the Session-Reflector. When there are parallel non-equal cost return paths between the Session-Reflector and the Session-Sender the response packet can only be returned on the lowest cost path. When configured to false, the Return Path TLV carried in the STAMP PDU is not included with the test packet. | |
Default | false | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
src-udp-port number
Synopsis | Fixed source UDP port for link measurement tests | |
Context | configure test-oam link-measurement measurement-template string twamp-light src-udp-port number | |
Tree | src-udp-port | |
Description | This command specifies a source UDP port for link measurement tests. Unless required, Nokia suggests that the link measurement dynamically select an available source UDP port from the dynamic range. Before a UDP port in the configurable range can be configured as a source it must be owned by the application. Use the configure test-oam twamp twamp-light source-udp-port-pools port pool-type command to map the port range to the application. By default a source UDP port allocates from the dynamic range. The configuration of the source port should only be configured when required for interoperability. When the source IP, destination IP, and destination UPD port are the same for a test, the source UDP port must be different in order to uniquely identify the session. | |
Range | 64374 to 64383 | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
timestamp-format keyword
Synopsis | Format of the timestamp used in TWAMP Light PDU | |
Context | configure test-oam link-measurement measurement-template string twamp-light timestamp-format keyword | |
Tree | timestamp-format | |
Description | This command configures the format of the timestamp used in the TWAMP Light PDU and places the requested timestamp format in the packet using the appropriate epoch. This is unrelated to any time distribution protocol used to synchronize time between clocks. | |
Options | ||
Default | ntp | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
ttl number
Synopsis | Time to live value used in the TWAMP Light test packet | |
Context | configure test-oam link-measurement measurement-template string twamp-light ttl number | |
Tree | ttl | |
Range | 1 to 255 | |
Default | 1 | |
Introduced | 21.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
unidirectional-measurement keyword
Synopsis | Method used to compute the unidirectional delay value | |
Context | configure test-oam link-measurement measurement-template string unidirectional-measurement keyword | |
Tree | unidirectional-measurement | |
Description | This command specifies the unidirectional delay computation method as the actual forward delay (calculated using T2-T1 timestamps) or as derived using the round-trip delay divided by two (required if nodal clocks are not synchronized using an accurate time-synchronization method or protocol such as PTP). | |
Options | ||
Default | derived | |
Introduced | 21.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mpls
echo-request-downstream-map keyword
Synopsis | Format of the downstream mapping TLV | |
Context | configure test-oam mpls echo-request-downstream-map keyword | |
Tree | echo-request-downstream-map | |
Description | This command specifies the format of the downstream mapping TLV to use in all LSP trace packets and LDP tree trace packets originated on this node. The following downstream mapping TLVs are supported: the original Downstream Mapping (DSMAP) TLV, defined in RFC 4379 (obsoleted by RFC 8029) and the Downstream Detailed Mapping (DDMAP) TLV, defined in RFC 6424. See the "DDMAP TLV" section in the 7450 ESS, 7750 SR, 7950 XRS, and VSR OAM and Diagnostics Guide for more information. | |
Options | ||
Default | dsmap | |
Introduced | 23.7.R1 | |
Platforms | All |
timestamp-format keyword
Synopsis | Timestamp format for MPLS ping request and reply PDUs | |
Context | configure test-oam mpls timestamp-format keyword | |
Tree | timestamp-format | |
Options | ||
Default | unix | |
Introduced | 23.7.R1 | |
Platforms | All |
mpls-dm
admin-state keyword
Synopsis | Administrative state of MPLS DM packet processing | |
Context | configure test-oam mpls-dm admin-state keyword | |
Tree | admin-state | |
Options | ||
Default | disable | |
Introduced | 16.0.R6 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
service-activation-testhead
Synopsis | Enter the service-activation-testhead context | |
Context | configure test-oam service-activation-testhead | |
Tree | service-activation-testhead | |
Description | Commands in this context configure service activation launch parameters for the testhead function. This functionality is supported on FP4 and later platforms. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
acceptance-criteria-template [ac-template-name] string
Synopsis | Enter the acceptance-criteria-template list instance | |
Context | configure test-oam service-activation-testhead acceptance-criteria-template string | |
Tree | acceptance-criteria-template | |
Description | Commands in this context configure the test acceptance criteria policy that the service test testhead OAM tool uses to determine the test result after test completion. The “default” value of this command is attached to every service-stream created under the service-test context for which no explicit acceptance criteria template policy is configured by the user. The default acceptance criteria template is not user-configurable. The default template does not set thresholds and only reports the end-of-run values. | |
Max. Instances | 100 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
[ac-template-name] string
Synopsis | Acceptance criteria template name | |
Context | configure test-oam service-activation-testhead acceptance-criteria-template string | |
Tree | acceptance-criteria-template | |
String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
cir-threshold number
Synopsis | CIR threshold | |
Context | configure test-oam service-activation-testhead acceptance-criteria-template string cir-threshold number | |
Tree | cir-threshold | |
Description | This command configures a CIR value that is compared to the measured results for the CIR test types. If the measured value is equal to or greater than the configured value, the test passes; otherwise, it fails. For more information, see the m-factor command. | |
Range | 1 to 400000000 | |
Units | kilobps | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
delay-threshold number
Synopsis | Delay threshold configuration for acceptance criteria template | |
Context | configure test-oam service-activation-testhead acceptance-criteria-template string delay-threshold number | |
Tree | delay-threshold | |
Description | This command configures a delay value that is compared to the measured delay at the end of the test to declare the test result. If the measured value is greater than the configured value, the test fails; otherwise, it passes. A measured delay value of zero also causes the test to fail. | |
Range | 1 to 100000000 | |
Units | microseconds | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
delay-var-threshold number
Synopsis | Delay variation threshold configuration for acceptance criteria template | |
Context | configure test-oam service-activation-testhead acceptance-criteria-template string delay-var-threshold number | |
Tree | delay-var-threshold | |
Description | This command configures a delay variation value that is compared to the measured delay variation at the end of the test to declare the test result. If the measured value is greater than the configured value, the test fails; otherwise, it passes. | |
Range | 1 to 100000000 | |
Units | microseconds | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
description string
Synopsis | Text description | |
Context | configure test-oam service-activation-testhead acceptance-criteria-template string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
loss-threshold decimal-number
Synopsis | Loss threshold for acceptance criteria template | |
Context | configure test-oam service-activation-testhead acceptance-criteria-template string loss-threshold decimal-number | |
Tree | loss-threshold | |
Description | This command configures a frame loss ratio (FLR) value that is compared to the measured FLR at the end of the test to determine the test result. If the measured value is greater than the configured value, the test fails; otherwise, it passes. Thresholds must be explicitly configured to use them for the comparison. The FLR is computed as a ratio of the difference of the number of received frames to the number of injected or sent frames divided by the number of sent frames. | |
Range | 0.0000 to 100.0000 | |
Units | percent | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
loss-threshold-policing decimal-number
Synopsis | Frame loss ratio for a policing test | |
Context | configure test-oam service-activation-testhead acceptance-criteria-template string loss-threshold-policing decimal-number | |
Tree | loss-threshold-policing | |
Description | This command configures a frame loss ratio (FLR) value for a policing test. The value is compared to the measured FLR at the end of the test to determine the test result. If the measured value is greater than the configured value, the test fails; otherwise, it passes. Thresholds must be explicitly configured before they can be used for comparison. The FLR is computed as a ratio of the difference of the number of received frames to the number of injected or sent frames divided by the number of sent frames. | |
Range | 0.0000 to 100.0000 | |
Units | percent | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
m-factor number
Synopsis | Throughput margin configuration | |
Context | configure test-oam service-activation-testhead acceptance-criteria-template string m-factor number | |
Tree | m-factor | |
Description | This command configures the margin by which the observed throughput is off from the configured throughput to determine whether a service test passes or fails. The M-factor is used with the CIR threshold and PIR threshold values for different test types to determine whether a test passes or fails. type cir
type cir-pir
type policing
type performance
| |
Range | 1 to 400000000 | |
Units | kilobps | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
pir-threshold number
Synopsis | PIR threshold | |
Context | configure test-oam service-activation-testhead acceptance-criteria-template string pir-threshold number | |
Tree | pir-threshold | |
Description | This command configures a PIR value that is compared to the measured results for the cir-pir, policing, and performance test types. If the measured value is equal to or greater than the configured value, the test passes; otherwise, it fails. For more information, see the m-factor command. | |
Range | 1 to 400000000 | |
Units | kilobps | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
frame-size-template [fs-template-name] string
Synopsis | Enter the frame-size-template list instance | |
Context | configure test-oam service-activation-testhead frame-size-template string | |
Tree | frame-size-template | |
Description | Commands in this context create a template to configure frames of different sizes for use with a test stream configured under the service-test command. The ITU-T Y.1564 methodology designates the letters “a” to “h” for a default frame size. The default frame size can be overwritten. | |
Max. Instances | 100 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
[fs-template-name] string
Synopsis | Frame size template name | |
Context | configure test-oam service-activation-testhead frame-size-template string | |
Tree | frame-size-template | |
String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
size-a number
Synopsis | Size-a | |
Context | configure test-oam service-activation-testhead frame-size-template string size-a number | |
Tree | size-a | |
Range | 64 to 9212 | |
Units | bytes | |
Default | 64 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
size-b number
Synopsis | Size-b | |
Context | configure test-oam service-activation-testhead frame-size-template string size-b number | |
Tree | size-b | |
Range | 64 to 9212 | |
Units | bytes | |
Default | 128 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
size-c number
Synopsis | Size-c | |
Context | configure test-oam service-activation-testhead frame-size-template string size-c number | |
Tree | size-c | |
Range | 64 to 9212 | |
Units | bytes | |
Default | 256 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
size-d number
Synopsis | Size-d | |
Context | configure test-oam service-activation-testhead frame-size-template string size-d number | |
Tree | size-d | |
Range | 64 to 9212 | |
Units | bytes | |
Default | 512 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
size-e number
Synopsis | Size-e | |
Context | configure test-oam service-activation-testhead frame-size-template string size-e number | |
Tree | size-e | |
Range | 64 to 9212 | |
Units | bytes | |
Default | 1024 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
size-f number
Synopsis | Size-f | |
Context | configure test-oam service-activation-testhead frame-size-template string size-f number | |
Tree | size-f | |
Range | 64 to 9212 | |
Units | bytes | |
Default | 1280 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
size-g number
Synopsis | Size-g | |
Context | configure test-oam service-activation-testhead frame-size-template string size-g number | |
Tree | size-g | |
Range | 64 to 9212 | |
Units | bytes | |
Default | 1518 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
size-h number
Synopsis | Size-h | |
Context | configure test-oam service-activation-testhead frame-size-template string size-h number | |
Tree | size-h | |
Range | 64 to 9212 | |
Units | bytes | |
Default | 9212 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
size-u number
Synopsis | Size-u | |
Context | configure test-oam service-activation-testhead frame-size-template string size-u number | |
Tree | size-u | |
Range | 64 to 9212 | |
Units | bytes | |
Default | 2000 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
service-test [test-name] string
Synopsis | Enter the service-test list instance | |
Context | configure test-oam service-activation-testhead service-test string | |
Tree | service-test | |
Description | Commands in this context configure the service test parameters. | |
Max. Instances | 500 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
[test-name] string
Synopsis | Service activation test name | |
Context | configure test-oam service-activation-testhead service-test string | |
Tree | service-test | |
String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
accounting-policy reference
Synopsis | Accounting policy to record service test results | |
Context | configure test-oam service-activation-testhead service-test string accounting-policy reference | |
Tree | accounting-policy | |
Description | This command creates a link to an accounting policy for the specified service test. The record of the accounting policy must be set to complete-service-activation-test. | |
Reference | configure log accounting-policy number | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
admin-state keyword
Synopsis | Administrative state of the service test | |
Context | configure test-oam service-activation-testhead service-test string admin-state keyword | |
Tree | admin-state | |
Options | ||
Default | disable | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
description string
Synopsis | Text description | |
Context | configure test-oam service-activation-testhead service-test string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
service-stream [stream-id] number
Synopsis | Enter the service-stream list instance | |
Context | configure test-oam service-activation-testhead service-test string service-stream number | |
Tree | service-stream | |
Description | Commands in this context configure a service stream profile for the specified service test. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
[stream-id] number
Synopsis | Service stream ID | |
Context | configure test-oam service-activation-testhead service-test string service-stream number | |
Tree | service-stream | |
Range | 1 to 8 | |
Notes | This element is part of a list key. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
acceptance-criteria-template reference
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Acceptance criteria association to a service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number acceptance-criteria-template reference | |
Tree | acceptance-criteria-template | |
Description | This command creates a link to an acceptance criteria template policy configured by the user for the specified service stream. Assign the "default" acceptance criteria template to remove the existing template in a service stream. | |
Reference | configure test-oam service-activation-testhead acceptance-criteria-template string | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
admin-state keyword
Synopsis | Administrative state of the service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number admin-state keyword | |
Tree | admin-state | |
Options | ||
Default | disable | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
description string
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Text description | |
Context | configure test-oam service-activation-testhead service-test string service-stream number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
frame-mix
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enter the frame-mix context | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-mix | |
Tree | frame-mix | |
Description | Commands in this context configure frame mixing for the specified service stream by referencing the frame size template. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
frame-size-template reference
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Frame size template for the service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-mix frame-size-template reference | |
Tree | frame-size-template | |
Description | This command configures the frame size template for the specified service stream. The user can assign the default frame-size-tmpl-name “default” to remove the existing template in a service stream. | |
Reference | configure test-oam service-activation-testhead frame-size-template string | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
sequence string
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Sequence of frame sizes for the service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-mix sequence string | |
Tree | sequence | |
Description | This command configures the frame sequence for the specified service stream by referencing the frame-size-template configuration. | |
String Length | 1 to 16 | |
Default | a | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
frame-payload
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enter the frame-payload context | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload | |
Tree | frame-payload | |
Description | Commands in this context configure packet header information used in frames generated by the testhead function. Only the specified header information is included in the frame. At a minimum, the user must configure the Ethernet destination MAC address and ETH-CFM information to include in the frame payload configuration. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
data-pattern
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enter the data-pattern context | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload data-pattern | |
Tree | data-pattern | |
Description | Commands in this context configure the data pattern to populate the payload portion of the frame generated by the service activation testhead. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
repeat (hex-string | number)
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Repeated 4-byte pattern to pad each packet sent | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload data-pattern repeat (hex-string | number) | |
Tree | repeat | |
Description | This command configures the data pattern padding bytes for the frames launched for the service stream. The specified data pattern value is repeated as many times as required to fill the remaining length of the payload for the highest level of the specified PDU. If only the Ethernet and ETH-CFM information is added, the data pattern is included in the data TLV of the ETH-CFM frame. | |
String Length | 10 | |
Max. Range | 0 to 4294967295 | |
Default | 0x00000000 | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
ethernet
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enter the ethernet context | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet | |
Tree | ethernet | |
Description | Commands in this context configure the Ethernet header parameters and ETH-CFM information used by the testhead tool. Only the specified header information is included in the frame. At a minimum, Ethernet MAC address and ETH-CFM information must be included. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
c-tag
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enter the c-tag context | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet c-tag | |
Tree | c-tag | |
Description | Commands in this context configure the customer VLAN tag (c-tag) information. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
discard-eligible boolean
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enable marking of the DEI bit in the VLAN header | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet c-tag discard-eligible boolean | |
Tree | discard-eligible | |
Description | When configured to true, the frame is discard eligible. | |
Default | false | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
dot1p number
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | PCP of Ethernet frames for service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet c-tag dot1p number | |
Tree | dot1p | |
Description | This command configures the priority code point (dot1p) value for the VLAN. | |
Range | 0 to 7 | |
Default | 7 | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
dst-mac string
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Destination MAC address of Ethernet frames | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet dst-mac string | |
Tree | dst-mac | |
Description | This command configures the unicast destination MAC address to use in the frame generated by the service activation testhead. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
eth-cfm
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enter the eth-cfm context | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet eth-cfm | |
Tree | eth-cfm | |
Description | Commands in this context configure ETH-CFM source MEP, destination MAC, and the ETH-CFM PDU type to carry the service activation stream. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
source
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enter the source context | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet eth-cfm source | |
Tree | source | |
Description | Commands in this context define the source launch maintenance association end point (MEP) for service activation. If a MEP that matches this configuration does not exist, the service activation test does not start. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
ma-admin-name reference
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Source Ethernet maintenance association name | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet eth-cfm source ma-admin-name reference | |
Tree | ma-admin-name | |
Reference | configure eth-cfm domain string association string | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
md-admin-name reference
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Source Ethernet maintenance domain name | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet eth-cfm source md-admin-name reference | |
Tree | md-admin-name | |
Reference | ||
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
mep-id number
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Source Ethernet maintenance association end point | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet eth-cfm source mep-id number | |
Tree | mep-id | |
Range | 1 to 8191 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
s-tag
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enter the s-tag context | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet s-tag | |
Tree | s-tag | |
Description | Commands in this context configure service VLAN tag (s-tag) information specification. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
discard-eligible boolean
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enable marking of the DEI bit in the VLAN header | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet s-tag discard-eligible boolean | |
Tree | discard-eligible | |
Description | When configured to true, the frame is discard eligible. | |
Default | false | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
dot1p number
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | PCP of Ethernet frames for service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number frame-payload ethernet s-tag dot1p number | |
Tree | dot1p | |
Description | This command configures the priority code point (dot1p) value for the VLAN. | |
Range | 0 to 7 | |
Default | 7 | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
rate-cir number
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | CIR packet transmit rate for the service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number rate-cir number | |
Tree | rate-cir | |
Description | This command configures the CIR that must be validated for a specific stream. If configured, the PIR value must be equal to or greater than the CIR value. When specified, the CIR rate overrides the default CIR value. The configured value must be a positive integer; fractional values are not allowed. If this command is not executed, or the CIR parameter is not explicitly specified, the default CIR value applies. The service activation testhead generates traffic up to the specified rate based on the test-types command, as follows.
| |
Range | 0 to 400000000 | |
Units | kilobps | |
Default | 0 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
rate-pir number
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | PIR packet transmit rate for the service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number rate-pir number | |
Tree | rate-pir | |
Description | This command specifies the PIR rate, which overrides the default administrative PIR value. The configured value must be a positive integer; fractional values are not allowed. If this command is not executed or the PIR parameter is not explicitly specified, the default PIR value applies. The service activation testhead generates traffic up to the specified rate based on the test-types command, as follows.
| |
Range | 0 to 400000000 | |
Units | kilobps | |
Default | 0 | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
service-stream-completion-notification boolean
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enable SNMP trap generation upon test completion | |
Context | configure test-oam service-activation-testhead service-test string service-stream number service-stream-completion-notification boolean | |
Tree | service-stream-completion-notification | |
Default | false | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
test-types
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enter the test-types context | |
Context | configure test-oam service-activation-testhead service-test string service-stream number test-types | |
Tree | test-types | |
Description | Commands in this context configure the types of tests to perform on a specific service stream. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
cir boolean
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enable running a CIR test for the service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number test-types cir boolean | |
Tree | cir | |
Default | false | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
cir-pir boolean
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Enable running a CIR-PIR test for the service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number test-types cir-pir boolean | |
Tree | cir-pir | |
Default | false | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
performance boolean
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Run a performance test for the service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number test-types performance boolean | |
Tree | performance | |
Default | false | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
policing boolean
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Run a policing test for the service stream | |
Context | configure test-oam service-activation-testhead service-test string service-stream number test-types policing boolean | |
Tree | policing | |
Default | false | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
service-test-completion-notification boolean
Synopsis | Enable SNMP trap generation upon test completion | |
Context | configure test-oam service-activation-testhead service-test string service-test-completion-notification boolean | |
Tree | service-test-completion-notification | |
Default | false | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
stream-run-type keyword
Synopsis | Service stream run order | |
Context | configure test-oam service-activation-testhead service-test string stream-run-type keyword | |
Tree | stream-run-type | |
Options | ||
Default | parallel | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
test-duration
Synopsis | Enter the test-duration context | |
Context | configure test-oam service-activation-testhead service-test string test-duration | |
Tree | test-duration | |
Description | Commands in this context configure the test duration for the various functional test types. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
cir
Synopsis | Enter the cir context | |
Context | configure test-oam service-activation-testhead service-test string test-duration cir | |
Tree | cir | |
Description | Commands in this context configure the duration for the CIR test type. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
minutes-seconds string
Synopsis | Duration of the service test CIR tests | |
Context | configure test-oam service-activation-testhead service-test string test-duration cir minutes-seconds string | |
Tree | minutes-seconds | |
String Length | 5 | |
Default | 05:00 | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
cir-pir
Synopsis | Enter the cir-pir context | |
Context | configure test-oam service-activation-testhead service-test string test-duration cir-pir | |
Tree | cir-pir | |
Description | Commands in this context configure the duration for the CIR-PIR test type. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
minutes-seconds string
Synopsis | Duration of the service test CIR-PIR tests | |
Context | configure test-oam service-activation-testhead service-test string test-duration cir-pir minutes-seconds string | |
Tree | minutes-seconds | |
String Length | 5 | |
Default | 10:00 | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
performance
Synopsis | Enter the performance context | |
Context | configure test-oam service-activation-testhead service-test string test-duration performance | |
Tree | performance | |
Description | Commands in this context configure the duration for the performance test type. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
hours-minutes-seconds string
Synopsis | Duration of performance tests belonging to the test | |
Context | configure test-oam service-activation-testhead service-test string test-duration performance hours-minutes-seconds string | |
Tree | hours-minutes-seconds | |
String Length | 8 | |
Default | 00:15:00 | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
policing
Synopsis | Enter the policing context | |
Context | configure test-oam service-activation-testhead service-test string test-duration policing | |
Tree | policing | |
Description | Commands in this context configure the duration for the policing test type. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
minutes-seconds string
Synopsis | Duration of policing tests belonging to the test | |
Context | configure test-oam service-activation-testhead service-test string test-duration policing minutes-seconds string | |
Tree | minutes-seconds | |
String Length | 5 | |
Default | 10:00 | |
Introduced | 23.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
twamp
server
admin-state keyword
Synopsis | Administrative state of the TWAMP server | |
Context | configure test-oam twamp server admin-state keyword | |
Tree | admin-state | |
Options | ||
Default | disable | |
Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
allow-ipv6-udp-checksum-zero boolean
Synopsis | Process IPv6 packets with a zero UDP checksum | |
Context | configure test-oam twamp server allow-ipv6-udp-checksum-zero boolean | |
Tree | allow-ipv6-udp-checksum-zero | |
Description | When configured to true, this command configures the acceptance of IPv6 packets with UDP checksums of 0. This optional configuration allows the router to process arriving IPv6 TWAMP Test packets that contain IPv6 UDP checksum of 0x0000. The UDP port specific to this TWAMP Light test bypasses the default discard IPv6 UDP checksum 0x0000. If this optional command is not configured, IPv6 UDP checksum 0x000 arriving packets are discarded. When configured to false, packets that arrive with an IPv6 UDP checksum of 0x0000 are discarded. | |
Default | false | |
Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
enforce-test-session-start-time boolean
Synopsis | Discard TWAMP packets before test-session start time | |
Context | configure test-oam twamp server enforce-test-session-start-time boolean | |
Tree | enforce-test-session-start-time | |
Description | When configured to true, the router checks the signalled test-session start time against the server time and discards TWAMP test packets that arrive before the negotiated test-session start time. When configured to false, the router processes all TWAMP test packets without checking the test-session start time against the server time. | |
Default | true | |
Introduced | 23.3.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
inactivity-timeout number
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Inactivity timeout for TWAMP control connections | |
Context | configure test-oam twamp server inactivity-timeout number | |
Tree | inactivity-timeout | |
Range | 60 to 3600 | |
Units | seconds | |
Default | 900 | |
Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-connections number
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Limit of concurrent TWAMP server control connections | |
Context | configure test-oam twamp server max-connections number | |
Tree | max-connections | |
Range | 0 to 64 | |
Default | 32 | |
Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-sessions number
WARNING: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. | ||
Synopsis | Maximum number of concurrent TWAMP server test sessions | |
Context | configure test-oam twamp server max-sessions number | |
Tree | max-sessions | |
Range | 0 to 128 | |
Default | 32 | |
Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
prefix [ip-prefix] (ipv4-prefix | ipv6-prefix)
[ip-prefix] (ipv4-prefix | ipv6-prefix)
description string
Synopsis | Text description | |
Context | configure test-oam twamp server prefix (ipv4-prefix | ipv6-prefix) description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-connections number
Synopsis | Maximum number of control connections for TWAMP prefix | |
Context | configure test-oam twamp server prefix (ipv4-prefix | ipv6-prefix) max-connections number | |
Tree | max-connections | |
Range | 0 to 64 | |
Default | 32 | |
Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
max-sessions number
Synopsis | Maximum concurrent TWAMP test sessions based on prefix | |
Context | configure test-oam twamp server prefix (ipv4-prefix | ipv6-prefix) max-sessions number | |
Tree | max-sessions | |
Range | 0 to 128 | |
Default | 32 | |
Introduced | 16.0.R4 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
twamp-light
Synopsis | Enter the twamp-light context | |
Context | configure test-oam twamp twamp-light | |
Tree | twamp-light | |
Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
inactivity-timeout number
Synopsis | Time to maintain stale state on the session reflector | |
Context | configure test-oam twamp twamp-light inactivity-timeout number | |
Tree | inactivity-timeout | |
Range | 10 to 100 | |
Units | seconds | |
Default | 100 | |
Introduced | 16.0.R4 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
source-udp-port-pools
Synopsis | Enter the source-udp-port-pools context | |
Context | configure test-oam twamp twamp-light source-udp-port-pools | |
Tree | source-udp-port-pools | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
port [port-number] number
Synopsis | Enter the port list instance | |
Context | configure test-oam twamp twamp-light source-udp-port-pools port number | |
Tree | port | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
[port-number] number
Synopsis | Source UDP port pools port number | |
Context | configure test-oam twamp twamp-light source-udp-port-pools port number | |
Tree | port | |
Range | 64374 to 64383 | |
Notes | This element is part of a list key. | |
Introduced | 22.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
pool-type keyword
Synopsis | Pool type of an application pool | |
Context | configure test-oam twamp twamp-light source-udp-port-pools port number pool-type keyword | |
Tree | pool-type | |
Description | This command maps the specified source UDP port to the TWAMP Light application allowed to configure the source UDP port. OAM-PM IP tests can only configure the source UDP port when the port pool UDP source port is configured with a pool-type oam-pm. The test-oam link-measurement measurement-template can only configure the src-udp-port when the port pool UDP source port is configured with pool-type link-measurement. A pool type cannot be changed if its current application is a test (either an oam-pm session or link-measurement template) and is configured to use the specified port, regardless of the administrative or operational state. The configuration reference linking to the source UDP prevents the change. | |
Options | ||
Default | oam-pm | |
Introduced | 22.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |