qos commands
configure
— qos
— adv-config-policy string
— apply-groups reference
— apply-groups-exclude reference
— child-control
— bandwidth-distribution
— above-offered-allowance
— delta-consumed-agg-rate
— percent decimal-number
— delta-consumed-higher-tier-rate
— percent decimal-number
— unconsumed-agg-rate
— percent decimal-number
— unconsumed-higher-tier-rate
— percent decimal-number
— above-offered-cap
— percent decimal-number
— rate (number | keyword)
— enqueue-on-pir-zero boolean
— granularity
— percent decimal-number
— rate number
— internal-scheduler-weight-mode keyword
— limit-pir-zero-drain boolean
— lub-init-min-pir boolean
— offered-measurement
— add
— active-min-only boolean
— min-only boolean
— percent decimal-number
— rate number
— fast-start boolean
— fast-stop boolean
— granularity
— percent decimal-number
— rate number
— hold-time
— active-min-only boolean
— high-rate number
— max-decrement
— percent decimal-number
— rate number
— sample-interval number
— time-average-factor
— dec-only boolean
— weighting-factor number
— description string
— apply-groups reference
— apply-groups-exclude reference
— fp-resource-policy string
— aggregate-shapers
— auto-creation boolean
— hw-agg-shapers
— saps boolean
— subscribers boolean
— queue-sets
— default-size
— queue-groups (number | keyword)
— saps (number | keyword)
— subscribers (number | keyword)
— size number
— allocation-weight number
— apply-groups reference
— apply-groups-exclude reference
— reserved-non-shaper-queues number
— apply-groups reference
— apply-groups-exclude reference
— description string
— ports
— hqos-mode keyword
— queues
— ingress-percent-of-total decimal-number
— hs-attachment-policy string
— apply-groups reference
— apply-groups-exclude reference
— description string
— low-burst-max-class number
— queue number
— apply-groups reference
— apply-groups-exclude reference
— sched-class number
— unattached
— wrr-group number
— wrr-group number
— apply-groups reference
— apply-groups-exclude reference
— sched-class number
— unattached
— hs-pool-policy string
— apply-groups reference
— apply-groups-exclude reference
— description string
— mid-tier
— mid-pool number
— allocation-percent decimal-number
— apply-groups reference
— apply-groups-exclude reference
— parent-root-pool
— none
— pool-id reference
— port-bw-oversubscription-factor number
— slope-policy reference
— root-tier
— root-pool number
— allocation-weight number
— apply-groups reference
— apply-groups-exclude reference
— slope-policy reference
— system-reserve decimal-number
— hs-port-pool-policy string
— alt-port-class-pools
— class-pool number
— allocation
— explicit-percent decimal-number
— port-bw-weight number
— apply-groups reference
— apply-groups-exclude reference
— parent-mid-pool
— none
— pool-id number
— slope-policy reference
— apply-groups reference
— apply-groups-exclude reference
— description string
— std-port-class-pools
— class-pool number
— allocation
— explicit-percent decimal-number
— port-bw-weight number
— apply-groups reference
— apply-groups-exclude reference
— parent-mid-pool
— none
— pool-id number
— slope-policy reference
— hs-scheduler-policy string
— apply-groups reference
— apply-groups-exclude reference
— description string
— group number
— apply-groups reference
— apply-groups-exclude reference
— rate (number | keyword)
— max-rate (number | keyword)
— scheduling-class number
— apply-groups reference
— apply-groups-exclude reference
— group
— group-id number
— weight number
— rate (number | keyword)
— hw-agg-shaper-scheduler-policy string
— apply-groups reference
— apply-groups-exclude reference
— congestion-threshold number
— description string
— group string
— max-percent-rate decimal-number
— max-rate (number | keyword)
— monitor-threshold number
— sched-class number
— apply-groups reference
— apply-groups-exclude reference
— group reference
— weight number
— match-list
— ip-prefix-list string
— apply-groups reference
— apply-groups-exclude reference
— description string
— prefix string
— ipv6-prefix-list string
— apply-groups reference
— apply-groups-exclude reference
— description string
— prefix string
— port-list string
— apply-groups reference
— apply-groups-exclude reference
— description string
— port number
— range number end number
— md-auto-id
— qos-policy-id-range
— apply-groups reference
— apply-groups-exclude reference
— end number
— start number
— network string
— apply-groups reference
— apply-groups-exclude reference
— description string
— egress
— dscp keyword
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— de-mark
— force number
— dot1p-in-profile number
— dot1p-out-profile number
— dscp-in-profile keyword
— dscp-out-profile keyword
— lsp-exp-in-profile number
— lsp-exp-out-profile number
— port-redirect-group
— policer number
— queue number
— ip-criteria
— entry number
— action
— fc keyword
— port-redirect-group
— policer number
— queue number
— profile keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— dscp keyword
— dst-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask string
— dst-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— fragment keyword
— icmp-type number
— protocol (number | keyword)
— src-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask string
— src-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— ipv6-criteria
— entry number
— action
— fc keyword
— port-redirect-group
— policer number
— queue number
— profile keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— dscp keyword
— dst-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask string
— dst-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— fragment keyword
— icmp-type number
— next-header (number | keyword)
— src-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask string
— src-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— prec number
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— remark-trusted
— force-egress-marking boolean
— ingress
— default-action
— fc keyword
— profile keyword
— dot1p number
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— dscp keyword
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— fp-redirect-group
— broadcast-policer number
— multicast-policer number
— policer number
— unknown-policer number
— ip-criteria
— entry number
— action
— fc keyword
— profile keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— dscp keyword
— dst-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask string
— dst-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— fragment keyword
— protocol (number | keyword)
— src-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask string
— src-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— ipv6-criteria
— entry number
— action
— fc keyword
— profile keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— dscp keyword
— dst-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask string
— dst-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— fragment keyword
— next-header (number | keyword)
— src-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask string
— src-port
— eq number
— gt number
— lt number
— port-list reference
— range
— end number
— start number
— ler-use-dscp boolean
— lsp-exp number
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— policy-id number
— scope keyword
— network-queue string
— apply-groups reference
— apply-groups-exclude reference
— description string
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— multicast-queue reference
— queue reference
— hs-attachment-policy reference
— hs-wrr-group number
— adaptation-rule
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— rate number
— queue number
— adaptation-rule
— cir keyword
— fir keyword
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— avg-frame-overhead decimal-number
— cbs decimal-number
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— hs-alt-port-class-pool boolean
— hs-class-weight number
— hs-mbs decimal-number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— mbs decimal-number
— multipoint boolean
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— queue-type keyword
— rate
— cir number
— fir number
— pir number
— policer-control-policy string
— apply-groups reference
— apply-groups-exclude reference
— description string
— root
— max-percent-rate decimal-number
— max-rate (number | keyword)
— priority-mbs-thresholds
— min-thresh-separation (number | keyword)
— priority number
— apply-groups reference
— apply-groups-exclude reference
— fixed-mbs boolean
— mbs-contribution (number | keyword)
— profile-preferred boolean
— tier number
— apply-groups reference
— apply-groups-exclude reference
— arbiter string
— apply-groups reference
— apply-groups-exclude reference
— arbiter-parent
— arbiter-name string
— level number
— weight number
— description string
— percent-rate decimal-number
— rate (number | keyword)
— reference-rate keyword
— port-scheduler-policy string
— apply-groups reference
— apply-groups-exclude reference
— description string
— dist-lag-rate-shared boolean
— group string
— apply-groups reference
— apply-groups-exclude reference
— monitor-threshold number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— hqos-algorithm keyword
— level number
— apply-groups reference
— apply-groups-exclude reference
— group reference
— monitor-threshold number
— percent-rate
— cir decimal-number
— pir decimal-number
— rate
— cir (number | keyword)
— pir (number | keyword)
— weight number
— max-percent-rate decimal-number
— max-rate (number | keyword)
— monitor-threshold number
— orphan-overrides
— cir-level number
— cir-weight number
— level number
— weight number
— post-policer-mapping string
— apply-groups reference
— apply-groups-exclude reference
— description string
— fc keyword profile keyword
— apply-groups reference
— apply-groups-exclude reference
— maps-to
— fc keyword
— profile keyword
— queue-group-redirect-list string
— apply-groups reference
— apply-groups-exclude reference
— match number
— apply-groups reference
— apply-groups-exclude reference
— instance number
— type keyword
— queue-group-templates
— apply-groups reference
— apply-groups-exclude reference
— egress
— apply-groups reference
— apply-groups-exclude reference
— queue-group string
— apply-groups reference
— apply-groups-exclude reference
— description string
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— queue
— none
— queue-id reference
— hs-attachment-policy reference
— hs-wrr-group number
— adaptation-rule
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— percent-rate decimal-number
— rate (number | keyword)
— policer number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— arbiter-parent
— arbiter-name string
— level number
— weight number
— cbs (number | keyword)
— description string
— exceed-pir boolean
— high-prio-only (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— reference-rate keyword
— profile-capped boolean
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— burst-limit (number | keyword)
— cbs (number | keyword)
— drop-tail
— exceed
— percent-reduction-from-mbs (number | keyword)
— high
— percent-reduction-from-mbs (number | keyword)
— highplus
— percent-reduction-from-mbs (number | keyword)
— low
— percent-reduction-from-mbs (number | keyword)
— dynamic-mbs boolean
— hs-alt-port-class-pool boolean
— hs-class-weight number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— reference-rate keyword
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— queue-delay number
— queue-type keyword
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name string
— weight number
— wred-queue
— mode keyword
— policy reference
— usage keyword
— queues-hqos-manageable boolean
— ingress
— apply-groups reference
— apply-groups-exclude reference
— queue-group string
— apply-groups reference
— apply-groups-exclude reference
— description string
— policer number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— arbiter-parent
— arbiter-name string
— level number
— weight number
— cbs (number | keyword)
— description string
— high-prio-only (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— profile-capped boolean
— rate
— cir (number | keyword)
— pir (number | keyword)
— stat-mode keyword
— queue number
— adaptation-rule
— cir keyword
— fir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— burst-limit (number | keyword)
— cbs (number | keyword)
— cir-non-profiling boolean
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— multipoint boolean
— packet-byte-offset number
— percent-rate
— cir decimal-number
— fir decimal-number
— pir decimal-number
— police
— reference-rate keyword
— queue-mode keyword
— queue-type keyword
— rate
— cir (number | keyword)
— fir (number | keyword)
— pir (number | keyword)
— police
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name string
— weight number
— sap-egress string
— apply-groups reference
— apply-groups-exclude reference
— description string
— dot1p number
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— dscp keyword
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— ethernet-ctag boolean
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— de-mark
— force number
— de-mark-inner
— force number
— de-mark-outer
— force number
— dot1p
— exceed-profile number
— in-profile number
— out-profile number
— dot1p-inner
— exceed-profile number
— in-profile number
— out-profile number
— dot1p-outer
— exceed-profile number
— in-profile number
— out-profile number
— dscp
— exceed-profile keyword
— in-profile keyword
— out-profile keyword
— policer reference
— port-redirect-group-queue
— queue number
— prec
— exceed-profile number
— in-profile number
— out-profile number
— queue reference
— queue-group-queue
— instance number
— queue reference
— queue-group-name reference
— hs-attachment-policy reference
— hs-wrr-group number
— adaptation-rule
— pir keyword
— apply-groups reference
— apply-groups-exclude reference
— hs-class-weight number
— percent-rate decimal-number
— rate (number | keyword)
— hw-agg-shaper-queues
— queue-set-size (number | keyword)
— ip-criteria
— entry number
— action
— fc keyword
— policer reference
— port-redirect-group-queue boolean
— profile keyword
— queue number
— type keyword
— use-fc-mapped-queue boolean
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— dscp keyword
— dst-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask string
— dst-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— fragment keyword
— protocol (number | keyword)
— src-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask string
— src-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— ipv6-criteria
— entry number
— action
— fc keyword
— policer reference
— port-redirect-group-queue boolean
— profile keyword
— queue number
— type keyword
— use-fc-mapped-queue boolean
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— dscp keyword
— dst-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask string
— dst-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— next-header (number | keyword)
— src-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask string
— src-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— parent-location keyword
— policer number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— arbiter-parent
— arbiter-name string
— level number
— weight number
— cbs (number | keyword)
— description string
— dscp-prec-remarking boolean
— exceed-pir boolean
— high-prio-only (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— reference-rate keyword
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— profile-capped boolean
— profile-out-preserve boolean
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name string
— weight number
— stat-mode keyword
— policers-hqos-manageable boolean
— policy-id number
— post-policer-mapping reference
— prec number
— apply-groups reference
— apply-groups-exclude reference
— fc keyword
— profile keyword
— queue number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— agg-shaper-weight number
— apply-groups reference
— apply-groups-exclude reference
— avg-frame-overhead decimal-number
— burst-limit (number | keyword)
— cbs (number | keyword)
— drop-tail
— exceed
— percent-reduction-from-mbs (number | keyword)
— high
— percent-reduction-from-mbs (number | keyword)
— highplus
— percent-reduction-from-mbs (number | keyword)
— low
— percent-reduction-from-mbs (number | keyword)
— fir-burst-limit (number | keyword)
— hs-alt-port-class-pool boolean
— hs-class-weight number
— hs-wred-queue
— policy reference
— hs-wrr-weight number
— maximum-data-transmission (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— reference-rate keyword
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— queue-type keyword
— rate
— cir (number | keyword)
— pir (number | keyword)
— sched-class (number | keyword)
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name string
— weight number
— wred-queue
— mode keyword
— policy reference
— usage keyword
— sched-class-elevation
— sched-class number
— apply-groups reference
— apply-groups-exclude reference
— weight number
— scope keyword
— subscriber-mgmt
— dynamic-policer
— arbiter-parent
— arbiter-name string
— level number
— weight number
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— policer-id-range
— end number
— start number
— stat-mode keyword
— dynamic-queue
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— queue-id-range
— end number
— start number
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name string
— weight number
— pcc-rule-entry
— range
— end number
— start number
— use-policer-result-marking-dot1p-inner boolean
— sap-ingress string
— apply-groups reference
— apply-groups-exclude reference
— default-fc string
— default-priority keyword
— description string
— dot1p number
— apply-groups reference
— apply-groups-exclude reference
— fc string
— priority keyword
— dscp keyword
— apply-groups reference
— apply-groups-exclude reference
— fc string
— priority keyword
— fc string
— apply-groups reference
— apply-groups-exclude reference
— broadcast-policer number
— broadcast-queue reference
— broadcast-queue-group-queue
— queue reference
— queue-group-name reference
— de-1-out-profile boolean
— egress-fc keyword
— fp-redirect-group-broadcast-policer
— fp-redirect-group-multicast-policer
— fp-redirect-group-policer
— fp-redirect-group-unknown-policer
— in-remark
— dscp keyword
— prec number
— multicast-policer number
— multicast-queue reference
— multicast-queue-group-queue
— queue reference
— queue-group-name reference
— out-remark
— dscp keyword
— prec number
— policer number
— profile keyword
— queue reference
— queue-group-queue
— queue reference
— queue-group-name reference
— unknown-policer number
— unknown-queue reference
— unknown-queue-group-queue
— queue reference
— queue-group-name reference
— ip-criteria
— entry number
— action
— fc string
— policer reference
— priority keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— dscp keyword
— dst-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask string
— dst-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— fragment keyword
— protocol (number | keyword)
— src-ip
— address (ipv4-prefix-with-host-bits | ipv4-address)
— ip-prefix-list reference
— mask string
— src-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— vxlan-vni
— eq number
— range
— end number
— start number
— tag number
— type keyword
— ipv6-criteria
— entry number
— action
— fc string
— policer reference
— priority keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— dscp keyword
— dst-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask string
— dst-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— fragment keyword
— next-header (number | keyword)
— src-ip
— address (ipv6-prefix-with-host-bits | ipv6-address)
— ipv6-prefix-list reference
— mask string
— src-port
— eq number
— gt number
— lt number
— range
— end number
— start number
— vxlan-vni
— eq number
— range
— end number
— start number
— tag number
— type keyword
— lsp-exp number
— apply-groups reference
— apply-groups-exclude reference
— fc string
— priority keyword
— mac-criteria
— entry number
— action
— fc string
— policer reference
— priority keyword
— type keyword
— apply-groups reference
— apply-groups-exclude reference
— description string
— match
— dot1p
— mask number
— priority number
— dst-mac
— address string
— mask string
— etype string
— frame-type keyword
— inner-tag
— mask number
— vlan number
— llc-dsap
— dsap number
— mask number
— llc-ssap
— mask number
— ssap number
— outer-tag
— mask number
— vlan number
— snap-oui keyword
— snap-pid number
— src-mac
— address string
— mask string
— type keyword
— policer number
— adaptation-rule
— cir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— arbiter-parent
— arbiter-name string
— level number
— weight number
— cbs (number | keyword)
— description string
— high-prio-only (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— percent-rate
— cir decimal-number
— pir decimal-number
— reference-rate keyword
— profile-capped boolean
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name string
— weight number
— stat-mode keyword
— policers-hqos-manageable boolean
— policy-id number
— prec number
— apply-groups reference
— apply-groups-exclude reference
— fc string
— priority keyword
— queue number
— adaptation-rule
— cir keyword
— fir keyword
— pir keyword
— adv-config-policy reference
— apply-groups reference
— apply-groups-exclude reference
— burst-limit (number | keyword)
— cbs (number | keyword)
— cir-non-profiling boolean
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs (number | keyword)
— multipoint boolean
— packet-byte-offset number
— percent-rate
— cir decimal-number
— fir decimal-number
— pir decimal-number
— police
— reference-rate keyword
— queue-mode keyword
— queue-type keyword
— rate
— cir (number | keyword)
— fir (number | keyword)
— pir (number | keyword)
— police
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name string
— weight number
— scope keyword
— subscriber-mgmt
— dynamic-policer
— arbiter-parent
— arbiter-name string
— level number
— weight number
— cbs (number | keyword)
— mbs (number | keyword)
— packet-byte-offset number
— policer-id-range
— end number
— start number
— stat-mode keyword
— pcc-rule-entry
— range
— end number
— start number
— scheduler-policy string
— apply-groups reference
— apply-groups-exclude reference
— description string
— frame-based-accounting boolean
— tier number
— apply-groups reference
— apply-groups-exclude reference
— parent-location keyword
— scheduler string
— apply-groups reference
— apply-groups-exclude reference
— description string
— limit-unused-bandwidth boolean
— percent-rate
— cir (keyword | decimal-number)
— pir decimal-number
— reference-rate keyword
— port-parent
— cir-level number
— cir-weight number
— level number
— weight number
— rate
— cir (number | keyword)
— pir (number | keyword)
— scheduler-parent
— cir-level number
— cir-weight number
— level number
— scheduler-name string
— weight number
— shared-queue string
— apply-groups reference
— apply-groups-exclude reference
— description string
— fc keyword
— apply-groups reference
— apply-groups-exclude reference
— broadcast-queue number
— multicast-queue number
— queue number
— unknown-queue number
— queue number
— apply-groups reference
— apply-groups-exclude reference
— cbs number
— drop-tail
— low
— percent-reduction-from-mbs (number | keyword)
— mbs number
— multipoint boolean
— queue-type keyword
— rate
— cir number
— fir number
— pir number
— slope-policy string
— apply-groups reference
— apply-groups-exclude reference
— description string
— exceed-slope
— admin-state keyword
— max-avg number
— max-prob number
— start-avg number
— high-slope
— admin-state keyword
— max-avg number
— max-prob number
— start-avg number
— highplus-slope
— admin-state keyword
— max-avg number
— max-prob number
— start-avg number
— low-slope
— admin-state keyword
— max-avg number
— max-prob number
— start-avg number
— time-average-factor number
qos command descriptions
qos
adv-config-policy [adv-config-policy-name] string
Synopsis | Enter the adv-config-policy list instance | |
Context | configure qos adv-config-policy string | |
Tree | adv-config-policy | |
Max. Instances | 255 | |
Introduced | 16.0.R1 | |
Platforms | All |
[adv-config-policy-name] string
Synopsis | Advanced QoS policy name | |
Context | configure qos adv-config-policy string | |
Tree | adv-config-policy | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
child-control
Synopsis | Enter the child-control context | |
Context | configure qos adv-config-policy string child-control | |
Tree | child-control | |
Introduced | 16.0.R1 | |
Platforms | All |
bandwidth-distribution
Synopsis | Enter the bandwidth-distribution context | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution | |
Tree | bandwidth-distribution | |
Introduced | 16.0.R1 | |
Platforms | All |
above-offered-allowance
Synopsis | Enter the above-offered-allowance context | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-allowance | |
Tree | above-offered-allowance | |
Description | Commands in this context control the child’s above offered allowance bandwidth. The configuration is only applicable when the port scheduler is configured to use the above-offered-allowance-control algorithm (specified via the configure qos port-scheduler-policy hqos-algorithm command). | |
Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
delta-consumed-agg-rate
Synopsis | Enter the delta-consumed-agg-rate context | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-allowance delta-consumed-agg-rate | |
Tree | delta-consumed-agg-rate | |
Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
percent decimal-number
Synopsis | Percentage of the delta consumed aggregate rate | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-allowance delta-consumed-agg-rate percent decimal-number | |
Tree | percent | |
Description | This command configures the percentage of the delta (from the beginning to the end of the current H-QoS below CIR or above CIR pass) of the aggregate rate consumed by other members that can be given to a queue at the end of an H-QoS below CIR pass and above CIR pass. This command is only applicable when the port scheduler is configured to use the above-offered-allowance-control algorithm; otherwise it is ignored. | |
Range | 0.00 to 100.00 | |
Default | 20.00 | |
Introduced | 19.10.R2 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
delta-consumed-higher-tier-rate
Synopsis | Enter the delta-consumed-higher-tier-rate context | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-allowance delta-consumed-higher-tier-rate | |
Tree | delta-consumed-higher-tier-rate | |
Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
percent decimal-number
Synopsis | Percentage of the delta consumed higher-tier rate | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-allowance delta-consumed-higher-tier-rate percent decimal-number | |
Tree | percent | |
Description | This command configures the percentage of the delta (from the beginning to the end of the current H-QoS below CIR or above CIR pass) of the higher-tier rate consumed by its other members that can be given to a queue at the end of an H-QoS below CIR pass and above CIR pass. Higher tier refers to the Vport aggregate rate and port scheduler level, group, and maximum rates. This command is only applicable when the port scheduler is configured to use the above-offered-allowance-control algorithm; otherwise it is ignored. | |
Range | 0.00 to 100.00 | |
Default | 5.00 | |
Introduced | 19.10.R2 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
unconsumed-agg-rate
Synopsis | Enter the unconsumed-agg-rate context | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-allowance unconsumed-agg-rate | |
Tree | unconsumed-agg-rate | |
Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
percent decimal-number
Synopsis | Percentage of the unconsumed aggregate rate | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-allowance unconsumed-agg-rate percent decimal-number | |
Tree | percent | |
Description | This command configures the percentage of the unconsumed aggregate rate that can be given to a queue at the end of an H-QoS below CIR pass and above CIR pass. This command is only applicable when the port scheduler is configured to use the above-offered-allowance-control algorithm; otherwise it is ignored. | |
Range | 0.00 to 100.00 | |
Default | 100.00 | |
Introduced | 19.10.R2 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
unconsumed-higher-tier-rate
Synopsis | Enter the unconsumed-higher-tier-rate context | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-allowance unconsumed-higher-tier-rate | |
Tree | unconsumed-higher-tier-rate | |
Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
percent decimal-number
Synopsis | Percentage of the unconsumed higher-tier rate | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-allowance unconsumed-higher-tier-rate percent decimal-number | |
Tree | percent | |
Description | This command configures the percentage of the unconsumed higher tier rate that can be given to a queue at the end of an H-QoS below CIR pass and above CIR pass. Higher tier refers to the Vport aggregate rate and port scheduler level, group, and maximum rates. This command is only applicable when the port scheduler is configured to use the above-offered-allowance-control algorithm; otherwise it is ignored. | |
Range | 0.00 to 100.00 | |
Default | 100.00 | |
Introduced | 19.10.R2 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
above-offered-cap
Synopsis | Enter the above-offered-cap context | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-cap | |
Tree | above-offered-cap | |
Introduced | 16.0.R1 | |
Platforms | All |
percent decimal-number
Synopsis | Percentage of PIR used as the fair share increase limit | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-cap percent decimal-number | |
Tree | percent | |
Range | 0.00 to 100.00 | |
Notes | The following elements are part of a choice: percent or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
rate (number | keyword)
Synopsis | Explicit rate as the fair share increase limit | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution above-offered-cap rate (number | keyword) | |
Tree | rate | |
Range | 0 to 100000000 | |
Options | ||
Notes | The following elements are part of a choice: percent or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
enqueue-on-pir-zero boolean
Synopsis | Queue packets when bandwidth distribution set to zero | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution enqueue-on-pir-zero boolean | |
Tree | enqueue-on-pir-zero | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
granularity
Synopsis | Enter the granularity context | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution granularity | |
Tree | granularity | |
Introduced | 16.0.R1 | |
Platforms | All |
percent decimal-number
Synopsis | Rounding percentage value for administrative PIR | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution granularity percent decimal-number | |
Tree | percent | |
Range | 0.00 to 100.00 | |
Notes | The following elements are part of a choice: percent or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
rate number
Synopsis | Rounding rate step value | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution granularity rate number | |
Tree | rate | |
Range | 0 to 100000000 | |
Notes | The following elements are part of a choice: percent or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
internal-scheduler-weight-mode keyword
Synopsis | Weight mode applied to this advanced QoS policy | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution internal-scheduler-weight-mode keyword | |
Tree | internal-scheduler-weight-mode | |
Options | ||
Introduced | 16.0.R1 | |
Platforms | All |
limit-pir-zero-drain boolean
Synopsis | Throttle draining when operational PIR set to zero | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution limit-pir-zero-drain boolean | |
Tree | limit-pir-zero-drain | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
lub-init-min-pir boolean
Synopsis | Apply minimal PIR for new queues when LUB is enabled | |
Context | configure qos adv-config-policy string child-control bandwidth-distribution lub-init-min-pir boolean | |
Tree | lub-init-min-pir | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
offered-measurement
Synopsis | Enter the offered-measurement context | |
Context | configure qos adv-config-policy string child-control offered-measurement | |
Tree | offered-measurement | |
Introduced | 16.0.R1 | |
Platforms | All |
add
Synopsis | Enter the add context | |
Context | configure qos adv-config-policy string child-control offered-measurement add | |
Tree | add | |
Introduced | 16.0.R1 | |
Platforms | All |
active-min-only boolean
Synopsis | Use minimum offered rate for active queues or policers | |
Context | configure qos adv-config-policy string child-control offered-measurement add active-min-only boolean | |
Tree | active-min-only | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
min-only boolean
Synopsis | Use increase in operational PIR as minimum offered rate | |
Context | configure qos adv-config-policy string child-control offered-measurement add min-only boolean | |
Tree | min-only | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
percent decimal-number
Synopsis | Percentage of child PIR to add to offered rate | |
Context | configure qos adv-config-policy string child-control offered-measurement add percent decimal-number | |
Tree | percent | |
Range | 0.00 to 100.00 | |
Notes | The following elements are part of a choice: percent or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
rate number
Synopsis | Rate value to add to child's offered rate | |
Context | configure qos adv-config-policy string child-control offered-measurement add rate number | |
Tree | rate | |
Range | 0 to 100000000 | |
Notes | The following elements are part of a choice: percent or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
fast-start boolean
Synopsis | Allow fast detection of initial bandwidth | |
Context | configure qos adv-config-policy string child-control offered-measurement fast-start boolean | |
Tree | fast-start | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
fast-stop boolean
Synopsis | Allow fast detection of lack of offered rate | |
Context | configure qos adv-config-policy string child-control offered-measurement fast-stop boolean | |
Tree | fast-stop | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
granularity
Synopsis | Enter the granularity context | |
Context | configure qos adv-config-policy string child-control offered-measurement granularity | |
Tree | granularity | |
Introduced | 16.0.R1 | |
Platforms | All |
percent decimal-number
Synopsis | Percentage of PIR used as threshold sensitivity to offered rate change | |
Context | configure qos adv-config-policy string child-control offered-measurement granularity percent decimal-number | |
Tree | percent | |
Range | 0.00 to 100.00 | |
Notes | The following elements are part of a choice: percent or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
rate number
Synopsis | Rate as child's offered rate change sensitivity value | |
Context | configure qos adv-config-policy string child-control offered-measurement granularity rate number | |
Tree | rate | |
Range | 0 to 100000000 | |
Notes | The following elements are part of a choice: percent or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
hold-time
Synopsis | Enter the hold-time context | |
Context | configure qos adv-config-policy string child-control offered-measurement hold-time | |
Tree | hold-time | |
Introduced | 16.0.R1 | |
Platforms | All |
active-min-only boolean
Synopsis | Use minimum offered rate for active queues or policers | |
Context | configure qos adv-config-policy string child-control offered-measurement hold-time active-min-only boolean | |
Tree | active-min-only | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
high-rate number
Synopsis | Time to maintain current offered rate | |
Context | configure qos adv-config-policy string child-control offered-measurement hold-time high-rate number | |
Tree | high-rate | |
Range | 0 to 60 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
max-decrement
Synopsis | Enter the max-decrement context | |
Context | configure qos adv-config-policy string child-control offered-measurement max-decrement | |
Tree | max-decrement | |
Introduced | 16.0.R1 | |
Platforms | All |
percent decimal-number
Synopsis | percentage as decrement limit to offered rate change | |
Context | configure qos adv-config-policy string child-control offered-measurement max-decrement percent decimal-number | |
Tree | percent | |
Range | 0.00 to 100.00 | |
Notes | The following elements are part of a choice: percent or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
rate number
Synopsis | Value to use as decrement limit to offered rate change | |
Context | configure qos adv-config-policy string child-control offered-measurement max-decrement rate number | |
Tree | rate | |
Range | 0 to 100000000 | |
Notes | The following elements are part of a choice: percent or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
sample-interval number
Synopsis | Interval for sampling the child's offered rate | |
Context | configure qos adv-config-policy string child-control offered-measurement sample-interval number | |
Tree | sample-interval | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
time-average-factor
Synopsis | Enter the time-average-factor context | |
Context | configure qos adv-config-policy string child-control offered-measurement time-average-factor | |
Tree | time-average-factor | |
Introduced | 16.0.R1 | |
Platforms | All |
dec-only boolean
Synopsis | Apply time adjustment when the offered rate decreases | |
Context | configure qos adv-config-policy string child-control offered-measurement time-average-factor dec-only boolean | |
Tree | dec-only | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
weighting-factor number
Synopsis | New offered rate with a sample of the previous offered rate | |
Context | configure qos adv-config-policy string child-control offered-measurement time-average-factor weighting-factor number | |
Tree | weighting-factor | |
Range | 0 to 64 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
description string
Synopsis | Text description | |
Context | configure qos adv-config-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
fp-resource-policy [fp-resource-policy-name] string
Synopsis | Enter the fp-resource-policy list instance | |
Context | configure qos fp-resource-policy string | |
Tree | fp-resource-policy | |
Max. Instances | 15 | |
Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
[fp-resource-policy-name] string
Synopsis | FP resource policy name | |
Context | configure qos fp-resource-policy string | |
Tree | fp-resource-policy | |
String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
aggregate-shapers
Synopsis | Enter the aggregate-shapers context | |
Context | configure qos fp-resource-policy string aggregate-shapers | |
Tree | aggregate-shapers | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
auto-creation boolean
WARNING: Modifying this element resets the associated cards/XIOMs/MDAs for the new value to take effect. On the 7750 SR-1, the configuration must be saved and the router must be rebooted for the new value to take effect. | ||
Synopsis | Enables auto-creation of hardware aggregate shapers | |
Context | configure qos fp-resource-policy string aggregate-shapers auto-creation boolean | |
Tree | auto-creation | |
Description | When configured to true, enables the auto-creation of hardware aggregate shapers on the specified FP. After enabling, the corresponding FP is rebooted. | |
Default | false | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
hw-agg-shapers
Synopsis | Enter the hw-agg-shapers context | |
Context | configure qos fp-resource-policy string aggregate-shapers hw-agg-shapers | |
Tree | hw-agg-shapers | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
saps boolean
WARNING: Modifying this element resets the associated cards/XIOMs/MDAs for the new value to take effect. On the 7750 SR-1, the configuration must be saved and the router must be rebooted for the new value to take effect. | ||
Synopsis | Enable hardware aggregate shapers for SAPs | |
Context | configure qos fp-resource-policy string aggregate-shapers hw-agg-shapers saps boolean | |
Tree | saps | |
Default | false | |
Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
subscribers boolean
WARNING: Modifying this element resets the associated cards/XIOMs/MDAs for the new value to take effect. On the 7750 SR-1, the configuration must be saved and the router must be rebooted for the new value to take effect. | ||
Synopsis | Enable hardware aggregate shapers for subscribers | |
Context | configure qos fp-resource-policy string aggregate-shapers hw-agg-shapers subscribers boolean | |
Tree | subscribers | |
Default | false | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
queue-sets
Synopsis | Enter the queue-sets context | |
Context | configure qos fp-resource-policy string aggregate-shapers queue-sets | |
Tree | queue-sets | |
Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
default-size
Synopsis | Enter the default-size context | |
Context | configure qos fp-resource-policy string aggregate-shapers queue-sets default-size | |
Tree | default-size | |
Description | Commands in this context configure the default queue-set size for individual object types. | |
Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
queue-groups (number | keyword)
Synopsis | Default size of queue-groups | |
Context | configure qos fp-resource-policy string aggregate-shapers queue-sets default-size queue-groups (number | keyword) | |
Tree | queue-groups | |
Range | 2 to 8 | |
Options | ||
Default | 8 | |
Introduced | 22.10.R1 | |
Platforms |
7750 SR-1, 7750 SR-s |
saps (number | keyword)
Synopsis | Default queue-set size for SAPs | |
Context | configure qos fp-resource-policy string aggregate-shapers queue-sets default-size saps (number | keyword) | |
Tree | saps | |
Description | This command configures the default queue-set size for SAPs. When the non-shaper-queues keyword is configured, SAPs do not use hardware aggregate shapers on FPs where the specified FP resource policy is applied. | |
Range | 2 to 8 | |
Options | ||
Default | 8 | |
Introduced | 22.10.R1 | |
Platforms |
7750 SR-1, 7750 SR-s |
subscribers (number | keyword)
Synopsis | Default queue-set size for subscribers | |
Context | configure qos fp-resource-policy string aggregate-shapers queue-sets default-size subscribers (number | keyword) | |
Tree | subscribers | |
Description | This command configures the default queue-set size for subscribers. When the non-shaper-queues keyword is configured, SAPs do not use hardware aggregate shapers on FPs where the specified FP resource policy is applied. | |
Range | 2 to 8 | |
Options | ||
Default | 8 | |
Introduced | 22.10.R1 | |
Platforms |
7750 SR-1, 7750 SR-s |
size [qset-size] number
Synopsis | Enter the size list instance | |
Context | configure qos fp-resource-policy string aggregate-shapers queue-sets size number | |
Tree | size | |
Description | Commands in this context configure parameters for the specified queue-set size. | |
Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
[qset-size] number
Synopsis | Size of the queue-sets | |
Context | configure qos fp-resource-policy string aggregate-shapers queue-sets size number | |
Tree | size | |
Range | 2 to 8 | |
Notes | This element is part of a list key. | |
Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
allocation-weight number
Synopsis | Allocation weight of the queue-set size | |
Context | configure qos fp-resource-policy string aggregate-shapers queue-sets size number allocation-weight number | |
Tree | allocation-weight | |
Description | This command configures the allocation weight for the specified queue-set size. The available queue-sets are distributed based on the allocation weight among different queue-set sizes. | |
Range | 0 to 100 | |
Introduced | 22.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
reserved-non-shaper-queues number
Synopsis | Number of queues reserved for non-shaper queues | |
Context | configure qos fp-resource-policy string aggregate-shapers reserved-non-shaper-queues number | |
Tree | reserved-non-shaper-queues | |
Description | This command configures the number of egress queues that will not be used by hardware aggregate shapers. | |
Range | 2048 to 262144 | |
Default | 8192 | |
Introduced | 22.10.R1 | |
Platforms |
7750 SR-1, 7750 SR-s |
description string
Synopsis | Text description | |
Context | configure qos fp-resource-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
ports
Synopsis | Enter the ports context | |
Context | configure qos fp-resource-policy string ports | |
Tree | ports | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
hqos-mode keyword
WARNING: Modifying this element resets the associated cards/XIOMs/MDAs for the new value to take effect. On the 7750 SR-1, the configuration must be saved and the router must be rebooted for the new value to take effect. | ||
Synopsis | Default HQOS mode of the port | |
Context | configure qos fp-resource-policy string ports hqos-mode keyword | |
Tree | hqos-mode | |
Options | ||
Default | port-scheduler | |
Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-s |
queues
Synopsis | Enter the queues context | |
Context | configure qos fp-resource-policy string queues | |
Tree | queues | |
Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
ingress-percent-of-total decimal-number
WARNING: Modifying this element resets the associated cards/XIOMs/MDAs for the new value to take effect. On the 7750 SR-1, the configuration must be saved and the router must be rebooted for the new value to take effect. | ||
Synopsis | Percentage of total ingress queues allocated | |
Context | configure qos fp-resource-policy string queues ingress-percent-of-total decimal-number | |
Tree | ingress-percent-of-total | |
Description | This command configures the percentage of the total number of queues on the FP on which the policy is applied that are allocated to ingress, with the remainder allocated to egress. The ingress and egress buffer pool sizes are not affected by the queue allocation. The allocation is performed in sets of 8192 queues, with a minimum of 8192 queues at ingress and 8192 queues at egress. If the percentage configured results in the queue allocation not being a multiple of 8192, the number of queues at ingress is rounded down to the next 8192 boundary, and consequently the number of queues at egress is rounded up to the next 8192 boundary, both while respecting the minimum at ingress and egress. If the FP resource policy is applied to any FP and the updated allocation is not achievable with the current ingress or egress queue consumption on any of the related FPs, the command fails. The configuration of this command (which includes removing the configuration) causes the router to immediately reset the associated cards, XIOMs and MDAs on all FPs on which the FP resource policy is applied, except on the 7750 SR-1, where the configuration must be saved and the router rebooted, immediately after committing the configuration transaction. | |
Range | 4.00 to 97.00 | |
Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
hs-attachment-policy [name] string
Synopsis | Enter the hs-attachment-policy list instance | |
Context | configure qos hs-attachment-policy string | |
Tree | hs-attachment-policy | |
Max. Instances | 31 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[name] string
Synopsis | HS attachment policy name | |
Context | configure qos hs-attachment-policy string | |
Tree | hs-attachment-policy | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
description string
Synopsis | Text description | |
Context | configure qos hs-attachment-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
low-burst-max-class number
Synopsis | Low priority burst threshold | |
Context | configure qos hs-attachment-policy string low-burst-max-class number | |
Tree | low-burst-max-class | |
Range | 1 to 6 | |
Default | 6 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
queue [queue-id] number
Synopsis | Enter the queue list instance | |
Context | configure qos hs-attachment-policy string queue number | |
Tree | queue | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[queue-id] number
Synopsis | Queue identifier for the HS attachment policy | |
Context | configure qos hs-attachment-policy string queue number | |
Tree | queue | |
Range | 1 to 8 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
sched-class number
Synopsis | Scheduling class associated with the queue | |
Context | configure qos hs-attachment-policy string queue number sched-class number | |
Tree | sched-class | |
Range | 1 to 6 | |
Notes | The following elements are part of a choice: sched-class, unattached, or wrr-group. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
unattached
Synopsis | Do not attach queue to scheduling class or WRR group | |
Context | configure qos hs-attachment-policy string queue number unattached | |
Tree | unattached | |
Notes | The following elements are part of a choice: sched-class, unattached, or wrr-group. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
wrr-group number
Synopsis | WRR group attached to the queue | |
Context | configure qos hs-attachment-policy string queue number wrr-group number | |
Tree | wrr-group | |
Range | 1 to 2 | |
Notes | The following elements are part of a choice: sched-class, unattached, or wrr-group. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
wrr-group [wrr-group-id] number
Synopsis | Enter the wrr-group list instance | |
Context | configure qos hs-attachment-policy string wrr-group number | |
Tree | wrr-group | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[wrr-group-id] number
Synopsis | WRR group ID for the HS attachment policy | |
Context | configure qos hs-attachment-policy string wrr-group number | |
Tree | wrr-group | |
Range | 1 to 2 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
sched-class number
Synopsis | Scheduling class associated with the WRR group | |
Context | configure qos hs-attachment-policy string wrr-group number sched-class number | |
Tree | sched-class | |
Range | 1 to 6 | |
Notes | The following elements are part of a choice: sched-class or unattached. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
unattached
Synopsis | Do not attach group ID to scheduling class or WRR group | |
Context | configure qos hs-attachment-policy string wrr-group number unattached | |
Tree | unattached | |
Notes | The following elements are part of a choice: sched-class or unattached. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-pool-policy [name] string
Synopsis | Enter the hs-pool-policy list instance | |
Context | configure qos hs-pool-policy string | |
Tree | hs-pool-policy | |
Max. Instances | 63 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[name] string
Synopsis | HS pool policy name | |
Context | configure qos hs-pool-policy string | |
Tree | hs-pool-policy | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
description string
Synopsis | Text description | |
Context | configure qos hs-pool-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
mid-tier
Synopsis | Enter the mid-tier context | |
Context | configure qos hs-pool-policy string mid-tier | |
Tree | mid-tier | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
mid-pool [mid-pool-id] number
Synopsis | Enter the mid-pool list instance | |
Context | configure qos hs-pool-policy string mid-tier mid-pool number | |
Tree | mid-pool | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[mid-pool-id] number
Synopsis | Mid-pool identifier for the HS pool policy | |
Context | configure qos hs-pool-policy string mid-tier mid-pool number | |
Tree | mid-pool | |
Range | 1 to 16 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
allocation-percent decimal-number
Synopsis | Root pool size to derive the mid-pool size | |
Context | configure qos hs-pool-policy string mid-tier mid-pool number allocation-percent decimal-number | |
Tree | allocation-percent | |
Range | 0.01 to 100.00 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
parent-root-pool
Synopsis | Enter the parent-root-pool context | |
Context | configure qos hs-pool-policy string mid-tier mid-pool number parent-root-pool | |
Tree | parent-root-pool | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
none
Synopsis | Assign no buffers to the mid-tier pool | |
Context | configure qos hs-pool-policy string mid-tier mid-pool number parent-root-pool none | |
Tree | none | |
Notes | The following elements are part of a choice: none or pool-id. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pool-id reference
Synopsis | Parent root pool to which the mid-pool is associated | |
Context | configure qos hs-pool-policy string mid-tier mid-pool number parent-root-pool pool-id reference | |
Tree | pool-id | |
Reference | configure qos hs-pool-policy string root-tier root-pool number | |
Notes | The following elements are part of a choice: none or pool-id. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
port-bw-oversubscription-factor number
Synopsis | Over subscription factor for port-class pool sizes | |
Context | configure qos hs-pool-policy string mid-tier mid-pool number port-bw-oversubscription-factor number | |
Tree | port-bw-oversubscription-factor | |
Description | This command modifies the size of the mid-pool when calculating the port-class pool sizes based on port bandwidth ratios. The over subscription factor for a mid-pool can be modified at any time, causing the corresponding port-class pool dynamic sizes to be recalculated. A similar behavior can be obtained by increasing the mid-pool's allocation-percent of its parent root-pool. However, the major difference in using this command is that it provides larger port-class pools without allowing the mid-pool to use a higher number of buffers in the root pool. | |
Range | 1 to 10 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
slope-policy reference
Synopsis | Slope policy to define high, low, and exceed slopes | |
Context | configure qos hs-pool-policy string mid-tier mid-pool number slope-policy reference | |
Tree | slope-policy | |
Reference | configure qos slope-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
root-tier
Synopsis | Enter the root-tier context | |
Context | configure qos hs-pool-policy string root-tier | |
Tree | root-tier | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
root-pool [root-pool-id] number
Synopsis | Enter the root-pool list instance | |
Context | configure qos hs-pool-policy string root-tier root-pool number | |
Tree | root-pool | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[root-pool-id] number
Synopsis | Root pool identifier for the HS pool policy | |
Context | configure qos hs-pool-policy string root-tier root-pool number | |
Tree | root-pool | |
Range | 1 to 16 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
allocation-weight number
Synopsis | Root pool allocation weight used to calculate pool size | |
Context | configure qos hs-pool-policy string root-tier root-pool number allocation-weight number | |
Tree | allocation-weight | |
Description | This command specifies the weight that is applied to the root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor. The amount of buffers remaining after the system-reserve percentage is applied is multiplied by the buffer allocation factor to derive the pool size. A root pool with an allocation weight set to “0” is considered inactive and is not allocated buffers. When a root pool’s allocation weight is modified, all root pools, mid-tier pools, and port class pool sizes are reevaluated and modified when necessary. | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
slope-policy reference
Synopsis | Slope policy to define high, low, and exceed slopes | |
Context | configure qos hs-pool-policy string root-tier root-pool number slope-policy reference | |
Tree | slope-policy | |
Reference | configure qos slope-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
system-reserve decimal-number
Synopsis | Percentage of buffers reserved for internal system use | |
Context | configure qos hs-pool-policy string system-reserve decimal-number | |
Tree | system-reserve | |
Range | 1.00 to 30.00 | |
Default | 5.00 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
hs-port-pool-policy [name] string
Synopsis | Enter the hs-port-pool-policy list instance | |
Context | configure qos hs-port-pool-policy string | |
Tree | hs-port-pool-policy | |
Max. Instances | 2047 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[name] string
Synopsis | HS port pool policy name | |
Context | configure qos hs-port-pool-policy string | |
Tree | hs-port-pool-policy | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
alt-port-class-pools
Synopsis | Enter the alt-port-class-pools context | |
Context | configure qos hs-port-pool-policy string alt-port-class-pools | |
Tree | alt-port-class-pools | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
class-pool [alt-class-pool-id] number
Synopsis | Enter the class-pool list instance | |
Context | configure qos hs-port-pool-policy string alt-port-class-pools class-pool number | |
Tree | class-pool | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[alt-class-pool-id] number
Synopsis | Class pool ID | |
Context | configure qos hs-port-pool-policy string alt-port-class-pools class-pool number | |
Tree | class-pool | |
Range | 1 to 6 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
allocation
Synopsis | Enter the allocation context | |
Context | configure qos hs-port-pool-policy string alt-port-class-pools class-pool number allocation | |
Tree | allocation | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
explicit-percent decimal-number
Synopsis | Percentage of parent pool to be allocated | |
Context | configure qos hs-port-pool-policy string alt-port-class-pools class-pool number allocation explicit-percent decimal-number | |
Tree | explicit-percent | |
Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: explicit-percent or port-bw-weight. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
port-bw-weight number
Synopsis | Port bandwidth weight to be allocated | |
Context | configure qos hs-port-pool-policy string alt-port-class-pools class-pool number allocation port-bw-weight number | |
Tree | port-bw-weight | |
Range | 1 to 100 | |
Default | 1 | |
Notes |
The following elements are part of a choice: explicit-percent or port-bw-weight. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
parent-mid-pool
Synopsis | Enter the parent-mid-pool context | |
Context | configure qos hs-port-pool-policy string alt-port-class-pools class-pool number parent-mid-pool | |
Tree | parent-mid-pool | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
none
Synopsis | Deactivate the port-class pool; pool size is zero | |
Context | configure qos hs-port-pool-policy string alt-port-class-pools class-pool number parent-mid-pool none | |
Tree | none | |
Notes | The following elements are part of a choice: none or pool-id. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pool-id number
Synopsis | Mid-pool ID associated with the port-class pool | |
Context | configure qos hs-port-pool-policy string alt-port-class-pools class-pool number parent-mid-pool pool-id number | |
Tree | pool-id | |
Range | 1 to 16 | |
Notes | The following elements are part of a choice: none or pool-id. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
slope-policy reference
Synopsis | Slope policy to define high, low, and exceed slopes | |
Context | configure qos hs-port-pool-policy string alt-port-class-pools class-pool number slope-policy reference | |
Tree | slope-policy | |
Reference | configure qos slope-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
description string
Synopsis | Text description | |
Context | configure qos hs-port-pool-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
std-port-class-pools
Synopsis | Enter the std-port-class-pools context | |
Context | configure qos hs-port-pool-policy string std-port-class-pools | |
Tree | std-port-class-pools | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
class-pool [std-class-pool-id] number
Synopsis | Enter the class-pool list instance | |
Context | configure qos hs-port-pool-policy string std-port-class-pools class-pool number | |
Tree | class-pool | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[std-class-pool-id] number
Synopsis | Class pool ID | |
Context | configure qos hs-port-pool-policy string std-port-class-pools class-pool number | |
Tree | class-pool | |
Range | 1 to 6 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
allocation
Synopsis | Enter the allocation context | |
Context | configure qos hs-port-pool-policy string std-port-class-pools class-pool number allocation | |
Tree | allocation | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
explicit-percent decimal-number
Synopsis | Percentage of parent pool to be allocated | |
Context | configure qos hs-port-pool-policy string std-port-class-pools class-pool number allocation explicit-percent decimal-number | |
Tree | explicit-percent | |
Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: explicit-percent or port-bw-weight. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
port-bw-weight number
Synopsis | Port bandwidth weight to be allocated | |
Context | configure qos hs-port-pool-policy string std-port-class-pools class-pool number allocation port-bw-weight number | |
Tree | port-bw-weight | |
Range | 1 to 100 | |
Default | 1 | |
Notes |
The following elements are part of a choice: explicit-percent or port-bw-weight. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
parent-mid-pool
Synopsis | Enter the parent-mid-pool context | |
Context | configure qos hs-port-pool-policy string std-port-class-pools class-pool number parent-mid-pool | |
Tree | parent-mid-pool | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
none
Synopsis | Deactivate the port-class pool; pool size is zero | |
Context | configure qos hs-port-pool-policy string std-port-class-pools class-pool number parent-mid-pool none | |
Tree | none | |
Notes | The following elements are part of a choice: none or pool-id. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pool-id number
Synopsis | Mid-pool ID associated with the port-class pool | |
Context | configure qos hs-port-pool-policy string std-port-class-pools class-pool number parent-mid-pool pool-id number | |
Tree | pool-id | |
Range | 1 to 16 | |
Notes | The following elements are part of a choice: none or pool-id. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
slope-policy reference
Synopsis | Slope policy to define high, low, and exceed slopes | |
Context | configure qos hs-port-pool-policy string std-port-class-pools class-pool number slope-policy reference | |
Tree | slope-policy | |
Reference | configure qos slope-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-scheduler-policy [name] string
Synopsis | Enter the hs-scheduler-policy list instance | |
Context | configure qos hs-scheduler-policy string | |
Tree | hs-scheduler-policy | |
Max. Instances | 127 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[name] string
Synopsis | HS scheduler policy name | |
Context | configure qos hs-scheduler-policy string | |
Tree | hs-scheduler-policy | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
description string
Synopsis | Text description | |
Context | configure qos hs-scheduler-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
group [group-id] number
Synopsis | Enter the group list instance | |
Context | configure qos hs-scheduler-policy string group number | |
Tree | group | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] number
Synopsis | Group ID for the HS scheduler policy | |
Context | configure qos hs-scheduler-policy string group number | |
Tree | group | |
Range | 1 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
Synopsis | Group maximum rate | |
Context | configure qos hs-scheduler-policy string group number rate (number | keyword) | |
Tree | rate | |
Range | 1 to 100000 | |
Units | megabps | |
Options | ||
Default | max | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
max-rate (number | keyword)
Synopsis | Maximum frame-based bandwidth limit for the policy | |
Context | configure qos hs-scheduler-policy string max-rate (number | keyword) | |
Tree | max-rate | |
Range | 1 to 100000 | |
Options | ||
Default | max | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
scheduling-class [class-id] number
Synopsis | Enter the scheduling-class list instance | |
Context | configure qos hs-scheduler-policy string scheduling-class number | |
Tree | scheduling-class | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[class-id] number
Synopsis | Scheduling class for the HS scheduler policy | |
Context | configure qos hs-scheduler-policy string scheduling-class number | |
Tree | scheduling-class | |
Range | 1 to 6 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
group
Synopsis | Enable the group context | |
Context | configure qos hs-scheduler-policy string scheduling-class number group | |
Tree | group | |
Notes | The following elements are part of a choice: group or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
group-id number
Synopsis | Associated group associated with this scheduling class | |
Context | configure qos hs-scheduler-policy string scheduling-class number group group-id number | |
Tree | group-id | |
Range | 1 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
weight number
Synopsis | Weight associated with this scheduling class | |
Context | configure qos hs-scheduler-policy string scheduling-class number group weight number | |
Tree | weight | |
Range | 1 to 127 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
rate (number | keyword)
Synopsis | Maximum frame-based bandwidth limit | |
Context | configure qos hs-scheduler-policy string scheduling-class number rate (number | keyword) | |
Tree | rate | |
Range | 1 to 100000 | |
Units | kilobps | |
Options | ||
Default | max | |
Notes |
The following elements are part of a choice: group or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hw-agg-shaper-scheduler-policy [name] string
Synopsis | Enter the hw-agg-shaper-scheduler-policy list instance | |
Context | configure qos hw-agg-shaper-scheduler-policy string | |
Tree | hw-agg-shaper-scheduler-policy | |
Description | Commands in this context configure the attributes of a hardware aggregate shaper scheduler policy. | |
Max. Instances | 127 | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
[name] string
Synopsis | Name of the hardware aggregate shaper scheduler policy | |
Context | configure qos hw-agg-shaper-scheduler-policy string | |
Tree | hw-agg-shaper-scheduler-policy | |
String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
congestion-threshold number
Synopsis | Congestion threshold of the scheduler | |
Context | configure qos hw-agg-shaper-scheduler-policy string congestion-threshold number | |
Tree | congestion-threshold | |
Description | This command configures the congestion threshold for the hardware aggregate shaper scheduler policy, which, if exceeded, triggers the hardware aggregate scheduler algorithm. The value is expressed as a percentage of the scheduler rate. | |
Range | 0 to 100 | |
Default | 90 | |
Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-s |
description string
Synopsis | Text description | |
Context | configure qos hw-agg-shaper-scheduler-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
group [group-name] string
Synopsis | Add a list entry for group | |
Context | configure qos hw-agg-shaper-scheduler-policy string group string | |
Tree | group | |
Max. Instances | 6 | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
[group-name] string
Synopsis | Name of the HW aggregate shaper scheduler policy group | |
Context | configure qos hw-agg-shaper-scheduler-policy string group string | |
Tree | group | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
max-percent-rate decimal-number
Synopsis | Maximum frame-based bandwidth percentage | |
Context | configure qos hw-agg-shaper-scheduler-policy string max-percent-rate decimal-number | |
Tree | max-percent-rate | |
Description | This command configures the rate of the hardware aggregate shaper scheduler expressed as a percentage of the port rate. | |
Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: max-percent-rate or max-rate. | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
max-rate (number | keyword)
Synopsis | Maximum frame-based bandwidth limit | |
Context | configure qos hw-agg-shaper-scheduler-policy string max-rate (number | keyword) | |
Tree | max-rate | |
Range | 1 to 6400000000 | |
Units | kilobps | |
Options | ||
Default | max | |
Notes |
The following elements are part of a choice: max-percent-rate or max-rate. | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
monitor-threshold number
Synopsis | Monitor threshold for the scheduler | |
Context | configure qos hw-agg-shaper-scheduler-policy string monitor-threshold number | |
Tree | monitor-threshold | |
Description | This command configures the monitor threshold for the hardware aggregate shaper scheduler policy, which is used for egress scheduler monitoring. The value is expressed as a percentage of the scheduler rate, which is considered as a limit for determining congestion. | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-s |
sched-class [class-id] number
Synopsis | Enter the sched-class list instance | |
Context | configure qos hw-agg-shaper-scheduler-policy string sched-class number | |
Tree | sched-class | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
[class-id] number
Synopsis | Scheduling class ID for the scheduler policy | |
Context | configure qos hw-agg-shaper-scheduler-policy string sched-class number | |
Tree | sched-class | |
Range | 1 to 6 | |
Notes | This element is part of a list key. | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
group reference
Synopsis | Group associated with the scheduling class | |
Context | configure qos hw-agg-shaper-scheduler-policy string sched-class number group reference | |
Tree | group | |
Description | This command assigns the specified scheduling class to a group within a hardware aggregate shaper scheduler policy. | |
Reference | configure qos hw-agg-shaper-scheduler-policy string group string | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
weight number
Synopsis | Weight associated with the scheduling class | |
Context | configure qos hw-agg-shaper-scheduler-policy string sched-class number weight number | |
Tree | weight | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-s |
match-list
Synopsis | Enter the match-list context | |
Context | configure qos match-list | |
Tree | match-list | |
Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list [prefix-list-name] string
Synopsis | Enter the ip-prefix-list list instance | |
Context | configure qos match-list ip-prefix-list string | |
Tree | ip-prefix-list | |
Max. Instances | 512 | |
Introduced | 16.0.R1 | |
Platforms | All |
[prefix-list-name] string
Synopsis | IP prefix list name | |
Context | configure qos match-list ip-prefix-list string | |
Tree | ip-prefix-list | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R3 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos match-list ip-prefix-list string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
prefix [ip-prefix] string
Synopsis | Add a list entry for prefix | |
Context | configure qos match-list ip-prefix-list string prefix string | |
Tree | prefix | |
Max. Instances | 256 | |
Introduced | 16.0.R1 | |
Platforms | All |
[ip-prefix] string
Synopsis | IPv4 address prefix | |
Context | configure qos match-list ip-prefix-list string prefix string | |
Tree | prefix | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R3 | |
Platforms | All |
ipv6-prefix-list [prefix-list-name] string
Synopsis | Enter the ipv6-prefix-list list instance | |
Context | configure qos match-list ipv6-prefix-list string | |
Tree | ipv6-prefix-list | |
Max. Instances | 128 | |
Introduced | 16.0.R4 | |
Platforms | All |
[prefix-list-name] string
Synopsis | IP prefix list name | |
Context | configure qos match-list ipv6-prefix-list string | |
Tree | ipv6-prefix-list | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R4 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos match-list ipv6-prefix-list string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R4 | |
Platforms | All |
prefix [ipv6-prefix] string
Synopsis | Add a list entry for prefix | |
Context | configure qos match-list ipv6-prefix-list string prefix string | |
Tree | prefix | |
Max. Instances | 128 | |
Introduced | 16.0.R4 | |
Platforms | All |
[ipv6-prefix] string
Synopsis | Ipv6 address prefix | |
Context | configure qos match-list ipv6-prefix-list string prefix string | |
Tree | prefix | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R4 | |
Platforms | All |
port-list [port-list-name] string
Synopsis | Enter the port-list list instance | |
Context | configure qos match-list port-list string | |
Tree | port-list | |
Max. Instances | 16 | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
[port-list-name] string
Synopsis | Port list name | |
Context | configure qos match-list port-list string | |
Tree | port-list | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
description string
Synopsis | Text description | |
Context | configure qos match-list port-list string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
port [value] number
Synopsis | Add a list entry for port | |
Context | configure qos match-list port-list string port number | |
Tree | port | |
Description | Commands in this context specify ports for a port match list. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
[value] number
Synopsis | Port number | |
Context | configure qos match-list port-list string port number | |
Tree | port | |
Range | 0 to 65535 | |
Notes | This element is part of a list key. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range [start] number end number
[start] number
end number
md-auto-id
Synopsis | Enter the md-auto-id context | |
Context | configure qos md-auto-id | |
Tree | md-auto-id | |
Introduced | 16.0.R1 | |
Platforms | All |
qos-policy-id-range
Synopsis | Enable the qos-policy-id-range context | |
Context | configure qos md-auto-id qos-policy-id-range | |
Tree | qos-policy-id-range | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Upper bound of the ID range | |
Context | configure qos md-auto-id qos-policy-id-range end number | |
Tree | end | |
Range | 2 to 65535 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Lower bound of the ID range | |
Context | configure qos md-auto-id qos-policy-id-range start number | |
Tree | start | |
Range | 2 to 65535 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
network [network-policy-name] string
[network-policy-name] string
description string
Synopsis | Text description | |
Context | configure qos network string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
egress
dscp [dscp-name] keyword
[dscp-name] keyword
fc keyword
profile keyword
fc [fc-name] keyword
[fc-name] keyword
de-mark
force number
dot1p-in-profile number
Synopsis | Dot1p marking for in-profile marking | |
Context | configure qos network string egress fc keyword dot1p-in-profile number | |
Tree | dot1p-in-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
dot1p-out-profile number
Synopsis | Dot1p marking for out-of-profile marking | |
Context | configure qos network string egress fc keyword dot1p-out-profile number | |
Tree | dot1p-out-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
dscp-in-profile keyword
Synopsis | DSCP marking for in-profile marking | |
Context | configure qos network string egress fc keyword dscp-in-profile keyword | |
Tree | dscp-in-profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
dscp-out-profile keyword
Synopsis | DSCP marking for out-of-profile marking | |
Context | configure qos network string egress fc keyword dscp-out-profile keyword | |
Tree | dscp-out-profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
lsp-exp-in-profile number
Synopsis | LSP-EXP marking for in-profile marking | |
Context | configure qos network string egress fc keyword lsp-exp-in-profile number | |
Tree | lsp-exp-in-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
lsp-exp-out-profile number
Synopsis | LSP-EXP marking for out-of-profile marking | |
Context | configure qos network string egress fc keyword lsp-exp-out-profile number | |
Tree | lsp-exp-out-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
port-redirect-group
Synopsis | Enter the port-redirect-group context | |
Context | configure qos network string egress fc keyword port-redirect-group | |
Tree | port-redirect-group | |
Introduced | 16.0.R1 | |
Platforms | All |
policer number
queue number
ip-criteria
Synopsis | Enter the ip-criteria context | |
Context | configure qos network string egress ip-criteria | |
Tree | ip-criteria | |
Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
[entry-id] number
Synopsis | Entry ID for match criterion and corresponding action | |
Context | configure qos network string egress ip-criteria entry number | |
Tree | entry | |
Description | This command uniquely identifies a match criterion and the corresponding action. Nokia recommends that multiple entries be given entry IDs in staggered increments. This allows users to insert a new entry in an existing policy without requiring renumbering all of the existing entries. | |
Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
action
fc keyword
port-redirect-group
Synopsis | Enter the port-redirect-group context | |
Context | configure qos network string egress ip-criteria entry number action port-redirect-group | |
Tree | port-redirect-group | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policer number
Synopsis | Policer ID to be used for the matched traffic | |
Context | configure qos network string egress ip-criteria entry number action port-redirect-group policer number | |
Tree | policer | |
Range | 1 to 16 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
queue number
Synopsis | Queue to be used for post-policed traffic | |
Context | configure qos network string egress ip-criteria entry number action port-redirect-group queue number | |
Tree | queue | |
Range | 1 to 8 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile keyword
type keyword
description string
Synopsis | Text description | |
Context | configure qos network string egress ip-criteria entry number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
match
dscp keyword
dst-ip
address (ipv4-prefix-with-host-bits | ipv4-address)
Synopsis | Destination IPv4 address to match | |
Context | configure qos network string egress ip-criteria entry number match dst-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
Synopsis | IP prefix list as the match criterion | |
Context | configure qos network string egress ip-criteria entry number match dst-ip ip-prefix-list reference | |
Tree | ip-prefix-list | |
Description | This command specifies an IP prefix list used as a match criterion for an IP address. | |
Reference | configure qos match-list ip-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask string
dst-port
eq number
gt number
lt number
port-list reference
Synopsis | Name of the port list as the match criterion | |
Context | configure qos network string egress ip-criteria entry number match dst-port port-list reference | |
Tree | port-list | |
Reference | configure qos match-list port-list string | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
fragment keyword
Synopsis | Fragmentation state as the match criterion | |
Context | configure qos network string egress ip-criteria entry number match fragment keyword | |
Tree | fragment | |
Description | This command configures fragmented or non-fragmented IP packets as a network QoS policy match criterion. When unconfigured, all packets match regardless of whether they are fragmented. | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
icmp-type number
Synopsis | ICMP type in the ICMP header of IPv4 packet to match | |
Context | configure qos network string egress ip-criteria entry number match icmp-type number | |
Tree | icmp-type | |
Description | This command configures matching on the ICMP type field in the ICMP header of an IPv4 packet as a network QoS match criterion. An entry containing Layer 4 non-zero match criteria does not match non-initial (second, third, and so on) fragments of a fragmented packet because only the first fragment contains the Layer 4 information. Similarly, an entry containing a match criteria of zero may not match non-initial fragments when the Layer 4 header is not present in a packet fragment and other match criteria are also met. | |
Range | 0 to 255 | |
Introduced | 16.0.R1 | |
Platforms | All |
protocol (number | keyword)
src-ip
address (ipv4-prefix-with-host-bits | ipv4-address)
Synopsis | Source IPv4 address to match | |
Context | configure qos network string egress ip-criteria entry number match src-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
Synopsis | IP prefix list as the match criterion | |
Context | configure qos network string egress ip-criteria entry number match src-ip ip-prefix-list reference | |
Tree | ip-prefix-list | |
Description | This command specifies an IP prefix list used as a match criterion for an IP address. | |
Reference | configure qos match-list ip-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask string
src-port
eq number
gt number
lt number
port-list reference
Synopsis | Name of the port list as the match criterion | |
Context | configure qos network string egress ip-criteria entry number match src-port port-list reference | |
Tree | port-list | |
Reference | configure qos match-list port-list string | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
ipv6-criteria
Synopsis | Enter the ipv6-criteria context | |
Context | configure qos network string egress ipv6-criteria | |
Tree | ipv6-criteria | |
Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
[entry-id] number
Synopsis | Entry ID for match criterion and corresponding action | |
Context | configure qos network string egress ipv6-criteria entry number | |
Tree | entry | |
Description | This command uniquely identifies a match criterion and the corresponding action. Nokia recommends that multiple entries be given entry IDs in staggered increments. This allows users to insert a new entry in an existing policy without requiring renumbering all of the existing entries. | |
Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
action
fc keyword
port-redirect-group
Synopsis | Enter the port-redirect-group context | |
Context | configure qos network string egress ipv6-criteria entry number action port-redirect-group | |
Tree | port-redirect-group | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policer number
Synopsis | Policer ID to be used for the matched traffic | |
Context | configure qos network string egress ipv6-criteria entry number action port-redirect-group policer number | |
Tree | policer | |
Range | 1 to 16 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
queue number
Synopsis | Queue to be used for post-policed traffic | |
Context | configure qos network string egress ipv6-criteria entry number action port-redirect-group queue number | |
Tree | queue | |
Range | 1 to 8 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile keyword
type keyword
description string
Synopsis | Text description | |
Context | configure qos network string egress ipv6-criteria entry number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
match
dscp keyword
dst-ip
address (ipv6-prefix-with-host-bits | ipv6-address)
Synopsis | Destination IPv6 address to match | |
Context | configure qos network string egress ipv6-criteria entry number match dst-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
Synopsis | IPv6 prefix list as the match criterion | |
Context | configure qos network string egress ipv6-criteria entry number match dst-ip ipv6-prefix-list reference | |
Tree | ipv6-prefix-list | |
Description | This command specifies an IPv6 prefix list used as a match criterion for an IP address. | |
Reference | configure qos match-list ipv6-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask string
dst-port
eq number
gt number
lt number
port-list reference
Synopsis | Name of the port list as the match criterion | |
Context | configure qos network string egress ipv6-criteria entry number match dst-port port-list reference | |
Tree | port-list | |
Reference | configure qos match-list port-list string | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
fragment keyword
Synopsis | Fragmentation state as the match criterion | |
Context | configure qos network string egress ipv6-criteria entry number match fragment keyword | |
Tree | fragment | |
Description | This command configures fragmented or non-fragmented IPv6 packets as a network QoS policy match criterion. When unconfigured, all packets match regardless of whether they are fragmented. | |
Options | ||
Introduced | 16.0.R1 | |
Platforms | All |
icmp-type number
Synopsis | ICMPv6 type in ICMPv6 header of IPv6 packet to match | |
Context | configure qos network string egress ipv6-criteria entry number match icmp-type number | |
Tree | icmp-type | |
Description | This command configures matching on the ICMPv6 type field in the ICMPv6 header of an IPv6 packet as a network QoS match criterion. An entry containing Layer 4 non-zero match criteria does not match non-initial (second, third, and so on) fragments of a fragmented packet because only the first fragment contains the Layer 4 information. Similarly, an entry containing a match criteria of zero may not match non-initial fragments when the Layer 4 header is not present in a packet fragment and other match criteria are also met. | |
Range | 0 to 255 | |
Introduced | 16.0.R1 | |
Platforms | All |
next-header (number | keyword)
Synopsis | IP protocol to match | |
Context | configure qos network string egress ipv6-criteria entry number match next-header (number | keyword) | |
Tree | next-header | |
Range | 0 to 255 | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
address (ipv6-prefix-with-host-bits | ipv6-address)
Synopsis | Source IPv6 address to match | |
Context | configure qos network string egress ipv6-criteria entry number match src-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
Synopsis | IPv6 prefix list as the match criterion | |
Context | configure qos network string egress ipv6-criteria entry number match src-ip ipv6-prefix-list reference | |
Tree | ipv6-prefix-list | |
Description | This command specifies an IPv6 prefix list used as a match criterion for an IP address. | |
Reference | configure qos match-list ipv6-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 23.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask string
src-port
eq number
gt number
lt number
port-list reference
Synopsis | Name of the port list as the match criterion | |
Context | configure qos network string egress ipv6-criteria entry number match src-port port-list reference | |
Tree | port-list | |
Reference | configure qos match-list port-list string | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
prec [prec-value] number
[prec-value] number
fc keyword
profile keyword
remark-trusted
Synopsis | Enable the remark-trusted context | |
Context | configure qos network string egress remark-trusted | |
Tree | remark-trusted | |
Introduced | 16.0.R1 | |
Platforms | All |
force-egress-marking boolean
Synopsis | Remark DSCP bits in the internal IP header | |
Context | configure qos network string egress remark-trusted force-egress-marking boolean | |
Tree | force-egress-marking | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
ingress
default-action
Synopsis | Enter the default-action context | |
Context | configure qos network string ingress default-action | |
Tree | default-action | |
Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
profile keyword
dot1p [dot1p-value] number
[dot1p-value] number
fc keyword
profile keyword
dscp [dscp-name] keyword
[dscp-name] keyword
fc keyword
profile keyword
fc [fc-name] keyword
[fc-name] keyword
fp-redirect-group
Synopsis | Enter the fp-redirect-group context | |
Context | configure qos network string ingress fc keyword fp-redirect-group | |
Tree | fp-redirect-group | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
broadcast-policer number
Synopsis | Policer to be used for broadcast traffic | |
Context | configure qos network string ingress fc keyword fp-redirect-group broadcast-policer number | |
Tree | broadcast-policer | |
Range | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
multicast-policer number
Synopsis | Policer to be used for multicast traffic | |
Context | configure qos network string ingress fc keyword fp-redirect-group multicast-policer number | |
Tree | multicast-policer | |
Range | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policer number
unknown-policer number
Synopsis | Policer to be used for unknown traffic | |
Context | configure qos network string ingress fc keyword fp-redirect-group unknown-policer number | |
Tree | unknown-policer | |
Range | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
ip-criteria
Synopsis | Enter the ip-criteria context | |
Context | configure qos network string ingress ip-criteria | |
Tree | ip-criteria | |
Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
[entry-id] number
action
fc keyword
profile keyword
type keyword
description string
Synopsis | Text description | |
Context | configure qos network string ingress ip-criteria entry number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
match
dscp keyword
dst-ip
address (ipv4-prefix-with-host-bits | ipv4-address)
Synopsis | Destination IPv4 address for network QoS policy match | |
Context | configure qos network string ingress ip-criteria entry number match dst-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
Synopsis | IPv4 prefix list containing IPv4 prefixes to match | |
Context | configure qos network string ingress ip-criteria entry number match dst-ip ip-prefix-list reference | |
Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R4 | |
Platforms | All |
mask string
dst-port
eq number
gt number
lt number
port-list reference
Synopsis | Port list used as match criterion | |
Context | configure qos network string ingress ip-criteria entry number match dst-port port-list reference | |
Tree | port-list | |
Description | This command assigns a port list to a matching criteria entry in the network QoS policy. Each entry can use only a single port list. Port lists and prefix lists are mutually exclusive. | |
Reference | configure qos match-list port-list string | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
fragment keyword
protocol (number | keyword)
src-ip
address (ipv4-prefix-with-host-bits | ipv4-address)
Synopsis | Source IPv4 address for network QoS policy match | |
Context | configure qos network string ingress ip-criteria entry number match src-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
Synopsis | IPv4 prefix list containing IPv4 prefixes to match | |
Context | configure qos network string ingress ip-criteria entry number match src-ip ip-prefix-list reference | |
Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R4 | |
Platforms | All |
mask string
src-port
eq number
gt number
lt number
port-list reference
Synopsis | Port list used as match criterion | |
Context | configure qos network string ingress ip-criteria entry number match src-port port-list reference | |
Tree | port-list | |
Description | This command assigns a port list to a matching criteria entry in the network QoS policy. Each entry can use only a single port list. Port lists and prefix lists are mutually exclusive. | |
Reference | configure qos match-list port-list string | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
ipv6-criteria
Synopsis | Enter the ipv6-criteria context | |
Context | configure qos network string ingress ipv6-criteria | |
Tree | ipv6-criteria | |
Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
[entry-id] number
action
fc keyword
profile keyword
type keyword
description string
Synopsis | Text description | |
Context | configure qos network string ingress ipv6-criteria entry number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
match
dscp keyword
dst-ip
address (ipv6-prefix-with-host-bits | ipv6-address)
Synopsis | Destination IPv6 address for network QoS policy match | |
Context | configure qos network string ingress ipv6-criteria entry number match dst-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
Synopsis | IPv6 prefix list containing IPv6 prefixes to match | |
Context | configure qos network string ingress ipv6-criteria entry number match dst-ip ipv6-prefix-list reference | |
Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R4 | |
Platforms | All |
mask string
dst-port
eq number
gt number
lt number
port-list reference
Synopsis | Port list used as match criterion | |
Context | configure qos network string ingress ipv6-criteria entry number match dst-port port-list reference | |
Tree | port-list | |
Description | This command assigns a port list to a matching criteria entry in the network QoS policy. Each entry can use only a single port list. Port lists and prefix lists are mutually exclusive. | |
Reference | configure qos match-list port-list string | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
fragment keyword
next-header (number | keyword)
Synopsis | IP protocol to match | |
Context | configure qos network string ingress ipv6-criteria entry number match next-header (number | keyword) | |
Tree | next-header | |
Range | 0 to 255 | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
address (ipv6-prefix-with-host-bits | ipv6-address)
Synopsis | Source IPv6 address for network QoS policy match | |
Context | configure qos network string ingress ipv6-criteria entry number match src-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
Synopsis | IPv6 prefix list containing IPv6 prefixes to match | |
Context | configure qos network string ingress ipv6-criteria entry number match src-ip ipv6-prefix-list reference | |
Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R4 | |
Platforms | All |
mask string
src-port
eq number
gt number
lt number
port-list reference
Synopsis | Port list used as match criterion | |
Context | configure qos network string ingress ipv6-criteria entry number match src-port port-list reference | |
Tree | port-list | |
Description | This command assigns a port list to a matching criteria entry in the network QoS policy. Each entry can use only a single port list. Port lists and prefix lists are mutually exclusive. | |
Reference | configure qos match-list port-list string | |
Notes | The following elements are part of a choice: eq, gt, lt, port-list, or range. | |
Introduced | 21.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
range
end number
start number
ler-use-dscp boolean
Synopsis | Honor the DSCP markings instead of the LSP-EXP bits | |
Context | configure qos network string ingress ler-use-dscp boolean | |
Tree | ler-use-dscp | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
lsp-exp [lsp-exp-value] number
[lsp-exp-value] number
fc keyword
profile keyword
policy-id number
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | QoS network policy ID | |
Context | configure qos network string policy-id number | |
Tree | policy-id | |
Description | This command specifies the QoS network policy ID and uniquely identifies the policy on the router. Network policy-id 1 exists as the default policy that is applied to all network interfaces by default. The network policy-id 1 cannot be modified or deleted. It defines the default DSCP-to-FC mapping and MPLS EXP-to-FC mapping for the ingress. For the egress, it defines forwarding classes that represent individual queues and the packet marking criteria. Network policy-id 1 exists as the default policy that is applied to all network ports by default. This default policy cannot be modified or deleted. It defines the default DSCP-to-FC mapping and default unicast meters for ingress IP traffic. For the egress, it defines the forwarding class to dot1p and DSCP values and the packet marking criteria. If a new network policy is created (for instance, policy-id 3), only the default action and egress forwarding class parameters are identical to the default policy. A new network policy does not contain the default DSCP-to-FC and MPLS-EXP-to-FC mapping for network QoS policy of type ip-interface or the DSCP-to-FC mapping (for network QoS policy of type port). The default network policy can be copied to create a new network policy that includes the default ingress DSCP-to-FC and MPLS EXP-to-FC mapping (as appropriate). | |
Range | 1 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
scope keyword
network-queue [network-queue-policy] string
Synopsis | Enter the network-queue list instance | |
Context | configure qos network-queue string | |
Tree | network-queue | |
Max. Instances | 255 | |
Introduced | 16.0.R1 | |
Platforms | All |
[network-queue-policy] string
Synopsis | Name for network queue policy | |
Context | configure qos network-queue string | |
Tree | network-queue | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos network-queue string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
fc [fc-name] keyword
Synopsis | Enter the fc list instance | |
Context | configure qos network-queue string fc keyword | |
Tree | fc | |
Introduced | 16.0.R1 | |
Platforms | All |
[fc-name] keyword
Synopsis | Forwarding class name | |
Context | configure qos network-queue string fc keyword | |
Tree | fc | |
Options | ||
Notes |
This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
multicast-queue reference
Synopsis | Multicast queue for packets in this forwarding class | |
Context | configure qos network-queue string fc keyword multicast-queue reference | |
Tree | multicast-queue | |
Reference | configure qos network-queue string queue number | |
Introduced | 16.0.R1 | |
Platforms | All |
queue reference
Synopsis | Queue for packets in this forwarding class | |
Context | configure qos network-queue string fc keyword queue reference | |
Tree | queue | |
Reference | configure qos network-queue string queue number | |
Introduced | 16.0.R1 | |
Platforms | All |
hs-attachment-policy reference
Synopsis | HS attachment policy applied | |
Context | configure qos network-queue string hs-attachment-policy reference | |
Tree | hs-attachment-policy | |
Reference | configure qos hs-attachment-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] number
Synopsis | Enter the hs-wrr-group list instance | |
Context | configure qos network-queue string hs-wrr-group number | |
Tree | hs-wrr-group | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] number
Synopsis | HS WRR group identifier | |
Context | configure qos network-queue string hs-wrr-group number | |
Tree | hs-wrr-group | |
Range | 1 to 2 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos network-queue string hs-wrr-group number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos network-queue string hs-wrr-group number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
Synopsis | Weight of scheduling class | |
Context | configure qos network-queue string hs-wrr-group number hs-class-weight number | |
Tree | hs-class-weight | |
Range | 1 | 2 | 4 | 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
rate number
Synopsis | PIR rate | |
Context | configure qos network-queue string hs-wrr-group number rate number | |
Tree | rate | |
Range | 1 to 100 | |
Units | kilobps | |
Default | 100 | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
queue [queue-id] number
Synopsis | Enter the queue list instance | |
Context | configure qos network-queue string queue number | |
Tree | queue | |
Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
Synopsis | Queue identifier | |
Context | configure qos network-queue string queue number | |
Tree | queue | |
Range | 1 to 16 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos network-queue string queue number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
Synopsis | Constraint used when deriving the operational CIR value | |
Context | configure qos network-queue string queue number adaptation-rule cir keyword | |
Tree | cir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
fir keyword
Synopsis | Constraint used when deriving the operational FIR value | |
Context | configure qos network-queue string queue number adaptation-rule fir keyword | |
Tree | fir | |
Options | ||
Default | closest | |
Introduced | 16.0.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos network-queue string queue number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
avg-frame-overhead decimal-number
Synopsis | Average packet-to-frame encapsulation overhead | |
Context | configure qos network-queue string queue number avg-frame-overhead decimal-number | |
Tree | avg-frame-overhead | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cbs decimal-number
Synopsis | Reserved buffer space for the queue | |
Context | configure qos network-queue string queue number cbs decimal-number | |
Tree | cbs | |
Range | 0.00 to 100.00 | |
Units | centipercent | |
Introduced | 16.0.R1 | |
Platforms | All |
drop-tail
Synopsis | Enter the drop-tail context | |
Context | configure qos network-queue string queue number drop-tail | |
Tree | drop-tail | |
Introduced | 16.0.R1 | |
Platforms | All |
low
percent-reduction-from-mbs (number | keyword)
Synopsis | Low drop-tail percent from MBS that is reduced | |
Context | configure qos network-queue string queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
hs-alt-port-class-pool boolean
Synopsis | Use HS alternate class port pool buffer for traffic | |
Context | configure qos network-queue string queue number hs-alt-port-class-pool boolean | |
Tree | hs-alt-port-class-pool | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
Synopsis | Scheduling class weight | |
Context | configure qos network-queue string queue number hs-class-weight number | |
Tree | hs-class-weight | |
Range | 1 | 2 | 4 | 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
hs-mbs decimal-number
Synopsis | Percentage of buffer space allowed for the HS queue | |
Context | configure qos network-queue string queue number hs-mbs decimal-number | |
Tree | hs-mbs | |
Range | 0.00 to 100.00 | |
Default | 100.00 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
hs-wred-queue
Synopsis | Enter the hs-wred-queue context | |
Context | configure qos network-queue string queue number hs-wred-queue | |
Tree | hs-wred-queue | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
Synopsis | Slope policy name | |
Context | configure qos network-queue string queue number hs-wred-queue policy reference | |
Tree | policy | |
Reference | configure qos slope-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
Synopsis | WRR weight with which queue parents into the scheduler | |
Context | configure qos network-queue string queue number hs-wrr-weight number | |
Tree | hs-wrr-weight | |
Range | 1 to 127 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
mbs decimal-number
Synopsis | Percentage of buffer space allowed for the queue | |
Context | configure qos network-queue string queue number mbs decimal-number | |
Tree | mbs | |
Range | 0.00 to 100.00 | |
Units | centipercent | |
Introduced | 16.0.R1 | |
Platforms | All |
multipoint boolean
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Apply as a multicast queue | |
Context | configure qos network-queue string queue number multipoint boolean | |
Tree | multipoint | |
Introduced | 16.0.R1 | |
Platforms | All |
port-parent
Synopsis | Enable the port-parent context | |
Context | configure qos network-queue string queue number port-parent | |
Tree | port-parent | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
Synopsis | Port priority to receive bandwidth for within-CIR pass | |
Context | configure qos network-queue string queue number port-parent cir-level number | |
Tree | cir-level | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
Synopsis | Weight to receive bandwidth at the within-CIR level | |
Context | configure qos network-queue string queue number port-parent cir-weight number | |
Tree | cir-weight | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
level number
Synopsis | Port priority level for above-CIR behavior | |
Context | configure qos network-queue string queue number port-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
weight number
Synopsis | Weight used at the within-CIR port priority level | |
Context | configure qos network-queue string queue number port-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
queue-type keyword
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Priority that this queue receives from the hardware level schedulers | |
Context | configure qos network-queue string queue number queue-type keyword | |
Tree | queue-type | |
Options | ||
Default | auto-expedited | |
Introduced | 16.0.R1 | |
Platforms | All |
rate
Synopsis | Enter the rate context | |
Context | configure qos network-queue string queue number rate | |
Tree | rate | |
Introduced | 16.0.R1 | |
Platforms | All |
cir number
fir number
Synopsis | FIR percentage | |
Context | configure qos network-queue string queue number rate fir number | |
Tree | fir | |
Description | This command defines an additional percentage at which the system prioritizes the queue over other queues competing for the same bandwidth above that used by the CIR percentage. | |
Range | 0 to 100 | |
Units | percent | |
Default | 0 | |
Introduced | 16.0.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
pir number
policer-control-policy [policer-control-policy-name] string
Synopsis | Enter the policer-control-policy list instance | |
Context | configure qos policer-control-policy string | |
Tree | policer-control-policy | |
Max. Instances | 2047 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[policer-control-policy-name] string
Synopsis | Policer control policy name | |
Context | configure qos policer-control-policy string | |
Tree | policer-control-policy | |
Description | This command specifies the policer control policy name. Each policer control policy must be created with a unique policy name. | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description string
Synopsis | Text description | |
Context | configure qos policer-control-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
root
Synopsis | Enter the root context | |
Context | configure qos policer-control-policy string root | |
Tree | root | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
max-percent-rate decimal-number
Synopsis | Maximum rate of the arbiter | |
Context | configure qos policer-control-policy string root max-percent-rate decimal-number | |
Tree | max-percent-rate | |
Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: max-percent-rate or max-rate. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
max-rate (number | keyword)
Synopsis | Maximum frame-based bandwidth limit of the arbiter | |
Context | configure qos policer-control-policy string root max-rate (number | keyword) | |
Tree | max-rate | |
Range | 1 to 6400000000 | |
Options | ||
Default | max | |
Notes | The following elements are part of a choice: max-percent-rate or max-rate. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority-mbs-thresholds
Synopsis | Enter the priority-mbs-thresholds context | |
Context | configure qos policer-control-policy string root priority-mbs-thresholds | |
Tree | priority-mbs-thresholds | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
min-thresh-separation (number | keyword)
Synopsis | Minimum separation between policer discard thresholds | |
Context | configure qos policer-control-policy string root priority-mbs-thresholds min-thresh-separation (number | keyword) | |
Tree | min-thresh-separation | |
Range | 0 to 16777216 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority [priority-level] number
Synopsis | Enter the priority list instance | |
Context | configure qos policer-control-policy string root priority-mbs-thresholds priority number | |
Tree | priority | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[priority-level] number
Synopsis | Priority level | |
Context | configure qos policer-control-policy string root priority-mbs-thresholds priority number | |
Tree | priority | |
Range | 1 to 8 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
fixed-mbs boolean
Synopsis | Consider cumulative buffer space to be fixed | |
Context | configure qos policer-control-policy string root priority-mbs-thresholds priority number fixed-mbs boolean | |
Tree | fixed-mbs | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs-contribution (number | keyword)
Synopsis | Minimum amount of cumulative buffer space | |
Context | configure qos policer-control-policy string root priority-mbs-thresholds priority number mbs-contribution (number | keyword) | |
Tree | mbs-contribution | |
Range | 0 to 16777216 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile-preferred boolean
Synopsis | Provide a preference to consume PIR bucket tokens | |
Context | configure qos policer-control-policy string root profile-preferred boolean | |
Tree | profile-preferred | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
tier [tier-id] number
Synopsis | Enter the tier list instance | |
Context | configure qos policer-control-policy string tier number | |
Tree | tier | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[tier-id] number
Synopsis | Tier for policer control policer arbiter | |
Context | configure qos policer-control-policy string tier number | |
Tree | tier | |
Range | 1 to 2 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter [arbiter-name] string
Synopsis | Enter the arbiter list instance | |
Context | configure qos policer-control-policy string tier number arbiter string | |
Tree | arbiter | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[arbiter-name] string
Synopsis | Arbiter name | |
Context | configure qos policer-control-policy string tier number arbiter string | |
Tree | arbiter | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-parent
Synopsis | Enter the arbiter-parent context | |
Context | configure qos policer-control-policy string tier number arbiter string arbiter-parent | |
Tree | arbiter-parent | |
Introduced | 16.0.R3 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-name string
Synopsis | Arbiter name | |
Context | configure qos policer-control-policy string tier number arbiter string arbiter-parent arbiter-name string | |
Tree | arbiter-name | |
Description | This command specifies the arbiter name. In tier 1, the arbiter name is not allowed and only the system reversed name "root" is accepted. The specified arbiter name must exist within the policer control policy at tier 1 or the parent command fails. When a tiered arbiter is acting as a parent for another tiered arbiter, the parent arbiter cannot be removed from the policy. The child arbiter receives all bandwidth directly from its parent arbiter (that receives bandwidth from the root arbiter). | |
String Length | 1 to 32 | |
Introduced | 16.0.R3 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
Synopsis | Level the child arbiter uses on its parent | |
Context | configure qos policer-control-policy string tier number arbiter string arbiter-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R3 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
Synopsis | Weight attribute at parent level applied to children | |
Context | configure qos policer-control-policy string tier number arbiter string arbiter-parent weight number | |
Tree | weight | |
Description | This command defines how multiple children at the same parent strict level compete when insufficient bandwidth exists on the parent for that level. Each child's weight is divided by the sum of the active children's weights and the result is multiplied by the available bandwidth. If a child cannot receive its entire weighted fair share of bandwidth due to a defined child rate limit, the remainder of its bandwidth is distributed between the other children based on their weights. | |
Range | 1 to 100 | |
Default | 1 | |
Introduced | 16.0.R3 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description string
Synopsis | Text description | |
Context | configure qos policer-control-policy string tier number arbiter string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate decimal-number
Synopsis | Maximum rate of the arbiter | |
Context | configure qos policer-control-policy string tier number arbiter string percent-rate decimal-number | |
Tree | percent-rate | |
Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: (percent-rate and reference-rate) or rate. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
rate (number | keyword)
Synopsis | Maximum frame-based bandwidth limit | |
Context | configure qos policer-control-policy string tier number arbiter string rate (number | keyword) | |
Tree | rate | |
Range | 1 to 6400000000 | |
Options | ||
Default | max | |
Notes | The following elements are part of a choice: (percent-rate and reference-rate) or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
reference-rate keyword
Synopsis | Reference rate | |
Context | configure qos policer-control-policy string tier number arbiter string reference-rate keyword | |
Tree | reference-rate | |
Options | ||
Default | local-limit | |
Notes | The following elements are part of a choice: (percent-rate and reference-rate) or rate. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
port-scheduler-policy [name] string
Synopsis | Enter the port-scheduler-policy list instance | |
Context | configure qos port-scheduler-policy string | |
Tree | port-scheduler-policy | |
Max. Instances | 1023 | |
Introduced | 16.0.R1 | |
Platforms | All |
[name] string
Synopsis | Port scheduler policy name | |
Context | configure qos port-scheduler-policy string | |
Tree | port-scheduler-policy | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos port-scheduler-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
dist-lag-rate-shared boolean
Synopsis | Share rates when port is part of LAG in distribute mode | |
Context | configure qos port-scheduler-policy string dist-lag-rate-shared boolean | |
Tree | dist-lag-rate-shared | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
group [group-name] string
Synopsis | Enter the group list instance | |
Context | configure qos port-scheduler-policy string group string | |
Tree | group | |
Max. Instances | 8 | |
Introduced | 16.0.R1 | |
Platforms | All |
[group-name] string
Synopsis | Weighted scheduler group name | |
Context | configure qos port-scheduler-policy string group string | |
Tree | group | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
monitor-threshold number
Synopsis | Congestion monitoring threshold | |
Context | configure qos port-scheduler-policy string group string monitor-threshold number | |
Tree | monitor-threshold | |
Description | This command defines the congestion monitoring threshold for the desired monitoring entity under the port scheduler for per aggregate port scheduler rate, per individual level, and per group that is aggregating multiple levels. The congestion threshold is specified as a percentage of the configured PIR for the entity for which congestion monitoring is desired. For example, if the configured PIR for level 1 is 100000 kb/s, and the monitoring threshold is set to 90%, an event where the offered rate is greater than 90,000 kb/s is recorded. This event is shown as part of the cumulative count of congestion threshold exceeds since the last clearing of the counters. | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos port-scheduler-policy string group string percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
Synopsis | Administrative CIR percent | |
Context | configure qos port-scheduler-policy string group string percent-rate cir decimal-number | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Default | 100.00 | |
Introduced | 16.0.R1 | |
Platforms |
All |
pir decimal-number
Synopsis | Administrative PIR percent | |
Context | configure qos port-scheduler-policy string group string percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 16.0.R1 | |
Platforms | All |
rate
Synopsis | Enter the rate context | |
Context | configure qos port-scheduler-policy string group string rate | |
Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
pir (number | keyword)
hqos-algorithm keyword
Synopsis | Port scheduler H-QoS algorithm | |
Context | configure qos port-scheduler-policy string hqos-algorithm keyword | |
Tree | hqos-algorithm | |
Description | This command configures the port scheduler H-QoS algorithm used to calculate the operational rates for the children connected to the port scheduler. | |
Options | ||
Default | default | |
Introduced | 19.10.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
level [level-id] number
Synopsis | Enter the level list instance | |
Context | configure qos port-scheduler-policy string level number | |
Tree | level | |
Introduced | 16.0.R1 | |
Platforms | All |
[level-id] number
Synopsis | Priority level this port scheduler policy | |
Context | configure qos port-scheduler-policy string level number | |
Tree | level | |
Range | 1 to 8 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
group reference
Synopsis | Associated group | |
Context | configure qos port-scheduler-policy string level number group reference | |
Tree | group | |
Reference | configure qos port-scheduler-policy string group string | |
Introduced | 16.0.R1 | |
Platforms | All |
monitor-threshold number
Synopsis | Monitoring threshold of the configured rate | |
Context | configure qos port-scheduler-policy string level number monitor-threshold number | |
Tree | monitor-threshold | |
Description | This command specifies the configured rate as a percentage. If the offered rate exceeds the configured threshold, a counter monitoring the threshold is increased. | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos port-scheduler-policy string level number percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
Synopsis | Administrative CIR percent | |
Context | configure qos port-scheduler-policy string level number percent-rate cir decimal-number | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Default | 100.00 | |
Introduced | 16.0.R1 | |
Platforms |
All |
pir decimal-number
Synopsis | Administrative PIR percent | |
Context | configure qos port-scheduler-policy string level number percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 16.0.R1 | |
Platforms | All |
rate
Synopsis | Enter the rate context | |
Context | configure qos port-scheduler-policy string level number rate | |
Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
pir (number | keyword)
weight number
Synopsis | Weight of the level in the weighted scheduler group | |
Context | configure qos port-scheduler-policy string level number weight number | |
Tree | weight | |
Range | 1 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
max-percent-rate decimal-number
Synopsis | Maximum frame-based bandwidth limit | |
Context | configure qos port-scheduler-policy string max-percent-rate decimal-number | |
Tree | max-percent-rate | |
Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: max-percent-rate or max-rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
max-rate (number | keyword)
Synopsis | Maximum frame-based bandwidth limit | |
Context | configure qos port-scheduler-policy string max-rate (number | keyword) | |
Tree | max-rate | |
Range | 1 to 6400000000 | |
Options | ||
Default | max | |
Notes | The following elements are part of a choice: max-percent-rate or max-rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
monitor-threshold number
Synopsis | Congestion monitoring threshold | |
Context | configure qos port-scheduler-policy string monitor-threshold number | |
Tree | monitor-threshold | |
Description | This command defines the congestion monitoring threshold for the desired monitoring entity under the port-scheduler for per aggregate port scheduler rate, per individual level, and per group that is aggregating multiple levels. The congestion threshold is specified as a percentage of the configured PIR rate for the entity for which congestion monitoring is desired. For example, if the configured PIR rate for level 1 is 1000,000 kb/s, and the monitoring threshold is set to 90%, an event where the offered rate is >90,000 kb/s is recorded. This event is shown as part of the cumulative count of congestion threshold exceeds since the last clearing of the counters. | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
orphan-overrides
Synopsis | Enter the orphan-overrides context | |
Context | configure qos port-scheduler-policy string orphan-overrides | |
Tree | orphan-overrides | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
Synopsis | Port priority level for within-CIR orphan behavior | |
Context | configure qos port-scheduler-policy string orphan-overrides cir-level number | |
Tree | cir-level | |
Description | This command defines the port priority that the orphan queues and schedulers use to receive bandwidth for their within-CIR offered-load. If the cir-weight command is set to the default value, the orphan queues and schedulers do not receive bandwidth during the port scheduler’s within-CIR pass and this command setting is ignored. | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
Synopsis | Weight to use in the within-CIR port priority level | |
Context | configure qos port-scheduler-policy string orphan-overrides cir-weight number | |
Tree | cir-weight | |
Description | This command defines the weight the orphan queues and schedulers will use in the within-CIR port priority level. When this command is set to the default value, the orphan queues and schedulers do not receive bandwidth during the port scheduler’s within-CIR pass and the cir-level command is ignored. | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
level number
Synopsis | Port priority level for above-CIR orphan behavior | |
Context | configure qos port-scheduler-policy string orphan-overrides level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
weight number
Synopsis | Weight to use in the above-CIR port priority level | |
Context | configure qos port-scheduler-policy string orphan-overrides weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
post-policer-mapping [name] string
Synopsis | Enter the post-policer-mapping list instance | |
Context | configure qos post-policer-mapping string | |
Tree | post-policer-mapping | |
Max. Instances | 7 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[name] string
Synopsis | Post-policer mapping policy name | |
Context | configure qos post-policer-mapping string | |
Tree | post-policer-mapping | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description string
Synopsis | Text description | |
Context | configure qos post-policer-mapping string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
fc [fc-name] keyword profile keyword
Synopsis | Enter the fc list instance | |
Context | configure qos post-policer-mapping string fc keyword profile keyword | |
Tree | fc | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[fc-name] keyword
Synopsis | Forwarding class remapping | |
Context | configure qos post-policer-mapping string fc keyword profile keyword | |
Tree | fc | |
Options | ||
Notes |
This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile keyword
Synopsis | Egress packet profile remapping | |
Context | configure qos post-policer-mapping string fc keyword profile keyword | |
Tree | fc | |
Options | ||
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
maps-to
fc keyword
profile keyword
queue-group-redirect-list [name] string
Synopsis | Enter the queue-group-redirect-list list instance | |
Context | configure qos queue-group-redirect-list string | |
Tree | queue-group-redirect-list | |
Max. Instances | 2047 | |
Introduced | 16.0.R1 | |
Platforms | All |
[name] string
Synopsis | Queue group redirect list name | |
Context | configure qos queue-group-redirect-list string | |
Tree | queue-group-redirect-list | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
match [field-value] number
Synopsis | Enter the match list instance | |
Context | configure qos queue-group-redirect-list string match number | |
Tree | match | |
Max. Instances | 16 | |
Introduced | 16.0.R1 | |
Platforms | All |
[field-value] number
Synopsis | Field value in the ingress or egress packet to match | |
Context | configure qos queue-group-redirect-list string match number | |
Tree | match | |
Description | This command specifies the value of the field in the ingress or egress packet. When there is a match, the packet is redirected to the specified queue group instance. The field must be a valid VXLAN VNI. | |
Range | 1 to 16777215 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
instance number
Synopsis | Queue group instance for traffic redirection | |
Context | configure qos queue-group-redirect-list string match number instance number | |
Tree | instance | |
Range | 1 to 65535 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
type keyword
Synopsis | Type for queue-group redirect list | |
Context | configure qos queue-group-redirect-list string type keyword | |
Tree | type | |
Options | ||
Default | vxlan-vni | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-group-templates
Synopsis | Enter the queue-group-templates context | |
Context | configure qos queue-group-templates | |
Tree | queue-group-templates | |
Introduced | 16.0.R1 | |
Platforms | All |
egress
Synopsis | Enter the egress context | |
Context | configure qos queue-group-templates egress | |
Tree | egress | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-group [egress-queue-group-name] string
Synopsis | Enter the queue-group list instance | |
Context | configure qos queue-group-templates egress queue-group string | |
Tree | queue-group | |
Introduced | 16.0.R1 | |
Platforms | All |
[egress-queue-group-name] string
Synopsis | Egress queue group template name | |
Context | configure qos queue-group-templates egress queue-group string | |
Tree | queue-group | |
Description | This command specifies the name of the egress queue group template. Each ingress queue group template must be uniquely named within the system. Multiple ingress queue group templates may not share the same name. An ingress and egress queue group template may share the same name. | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos queue-group-templates egress queue-group string description string | |
Tree | description | |
String Length | 0 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
fc [fc-name] keyword
Synopsis | Enter the fc list instance | |
Context | configure qos queue-group-templates egress queue-group string fc keyword | |
Tree | fc | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[fc-name] keyword
Synopsis | Forwarding class name | |
Context | configure qos queue-group-templates egress queue-group string fc keyword | |
Tree | fc | |
Options | ||
Notes |
This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
queue
Synopsis | Enter the queue context | |
Context | configure qos queue-group-templates egress queue-group string fc keyword queue | |
Tree | queue | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
none
Synopsis | No mid-pool is associated with this parent-pool | |
Context | configure qos queue-group-templates egress queue-group string fc keyword queue none | |
Tree | none | |
Notes | The following elements are part of a choice: none or queue-id. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
queue-id reference
Synopsis | Queue defined in forwarding class mapping | |
Context | configure qos queue-group-templates egress queue-group string fc keyword queue queue-id reference | |
Tree | queue-id | |
Reference | configure qos queue-group-templates egress queue-group string queue number | |
Notes | The following elements are part of a choice: none or queue-id. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
hs-attachment-policy reference
Synopsis | HS attachment policy applied | |
Context | configure qos queue-group-templates egress queue-group string hs-attachment-policy reference | |
Tree | hs-attachment-policy | |
Reference | configure qos hs-attachment-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] number
Synopsis | Enter the hs-wrr-group list instance | |
Context | configure qos queue-group-templates egress queue-group string hs-wrr-group number | |
Tree | hs-wrr-group | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] number
Synopsis | HS WRR group identifier | |
Context | configure qos queue-group-templates egress queue-group string hs-wrr-group number | |
Tree | hs-wrr-group | |
Range | 1 to 2 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos queue-group-templates egress queue-group string hs-wrr-group number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos queue-group-templates egress queue-group string hs-wrr-group number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
Synopsis | Weight of scheduling class | |
Context | configure qos queue-group-templates egress queue-group string hs-wrr-group number hs-class-weight number | |
Tree | hs-class-weight | |
Range | 1 | 2 | 4 | 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
percent-rate decimal-number
Synopsis | Administrative PIR percent | |
Context | configure qos queue-group-templates egress queue-group string hs-wrr-group number percent-rate decimal-number | |
Tree | percent-rate | |
Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
Synopsis | Administrative PIR | |
Context | configure qos queue-group-templates egress queue-group string hs-wrr-group number rate (number | keyword) | |
Tree | rate | |
Range | 1 to 2000000000 | |
Units | kilobps | |
Options | ||
Default | max | |
Notes |
The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policer [policer-id] number
Synopsis | Enter the policer list instance | |
Context | configure qos queue-group-templates egress queue-group string policer number | |
Tree | policer | |
Description | Commands in this context configure a QoS egress queue-group policer. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[policer-id] number
Synopsis | Egress queue-group policer ID | |
Context | configure qos queue-group-templates egress queue-group string policer number | |
Tree | policer | |
Description | This command specifies the queue-group policer that will either be created or edited within the queue group template. For VSR, the queue group template may only have up to eight policers (numbered 1 through 8). | |
Range | 1 to 16 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos queue-group-templates egress queue-group string policer number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir keyword
Synopsis | Constraint used when deriving the operational CIR value | |
Context | configure qos queue-group-templates egress queue-group string policer number adaptation-rule cir keyword | |
Tree | cir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos queue-group-templates egress queue-group string policer number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adv-config-policy reference
Synopsis | Advanced QoS policy name | |
Context | configure qos queue-group-templates egress queue-group string policer number adv-config-policy reference | |
Tree | adv-config-policy | |
Reference | configure qos adv-config-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-parent
Synopsis | Enter the arbiter-parent context | |
Context | configure qos queue-group-templates egress queue-group string policer number arbiter-parent | |
Tree | arbiter-parent | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-name string
Synopsis | Arbiter name | |
Context | configure qos queue-group-templates egress queue-group string policer number arbiter-parent arbiter-name string | |
Tree | arbiter-name | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
Synopsis | Priority level | |
Context | configure qos queue-group-templates egress queue-group string policer number arbiter-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
Synopsis | Weight in the priority level | |
Context | configure qos queue-group-templates egress queue-group string policer number arbiter-parent weight number | |
Tree | weight | |
Range | 1 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
Context | configure qos queue-group-templates egress queue-group string policer number cbs (number | keyword) | |
Tree | cbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description string
Synopsis | Text description | |
Context | configure qos queue-group-templates egress queue-group string policer number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
exceed-pir boolean
Synopsis | Forward packets exceeding the PIR as exceed-profile | |
Context | configure qos queue-group-templates egress queue-group string policer number exceed-pir boolean | |
Tree | exceed-pir | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
high-prio-only (number | keyword)
Synopsis | Percentage of MBS reserved for high priority traffic | |
Context | configure qos queue-group-templates egress queue-group string policer number high-prio-only (number | keyword) | |
Tree | high-prio-only | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs (number | keyword)
Synopsis | Maximum buffer size for the template queue | |
Context | configure qos queue-group-templates egress queue-group string policer number mbs (number | keyword) | |
Tree | mbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
packet-byte-offset number
Synopsis | Packet size modification for policing information | |
Context | configure qos queue-group-templates egress queue-group string policer number packet-byte-offset number | |
Tree | packet-byte-offset | |
Range | -64 to 31 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos queue-group-templates egress queue-group string policer number percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
Synopsis | Administrative CIR | |
Context | configure qos queue-group-templates egress queue-group string policer number percent-rate cir decimal-number | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir decimal-number
Synopsis | Administrative PIR | |
Context | configure qos queue-group-templates egress queue-group string policer number percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 20.10.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
reference-rate keyword
Synopsis | Reference rate | |
Context | configure qos queue-group-templates egress queue-group string policer number percent-rate reference-rate keyword | |
Tree | reference-rate | |
Options | ||
Default | local-limit | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile-capped boolean
Synopsis | Enforce a limit on the profile | |
Context | configure qos queue-group-templates egress queue-group string policer number profile-capped boolean | |
Tree | profile-capped | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
rate
Synopsis | Enter the rate context | |
Context | configure qos queue-group-templates egress queue-group string policer number rate | |
Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
Synopsis | Administrative CIR | |
Context | configure qos queue-group-templates egress queue-group string policer number rate cir (number | keyword) | |
Tree | cir | |
Range | 0 to 2000000000 | |
Units | kilobps | |
Options | ||
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir (number | keyword)
Synopsis | Administrative PIR | |
Context | configure qos queue-group-templates egress queue-group string policer number rate pir (number | keyword) | |
Tree | pir | |
Range | 1 to 2000000000 | |
Units | kilobps | |
Options | ||
Default | max | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
stat-mode keyword
Synopsis | Mode of statistics collected by the policer | |
Context | configure qos queue-group-templates egress queue-group string policer number stat-mode keyword | |
Tree | stat-mode | |
Options | ||
Default | minimal | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
queue [queue-id] number
Synopsis | Enter the queue list instance | |
Context | configure qos queue-group-templates egress queue-group string queue number | |
Tree | queue | |
Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
Synopsis | Egress Queue-Group queue identifier | |
Context | configure qos queue-group-templates egress queue-group string queue number | |
Tree | queue | |
Range | 1 to 8 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos queue-group-templates egress queue-group string queue number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
Synopsis | Constraint used when deriving the operational CIR value | |
Context | configure qos queue-group-templates egress queue-group string queue number adaptation-rule cir keyword | |
Tree | cir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos queue-group-templates egress queue-group string queue number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
adv-config-policy reference
Synopsis | Name of the advanced configuration policy | |
Context | configure qos queue-group-templates egress queue-group string queue number adv-config-policy reference | |
Tree | adv-config-policy | |
Reference | configure qos adv-config-policy string | |
Introduced | 16.0.R1 | |
Platforms | All |
burst-limit (number | keyword)
Synopsis | Explicit shaping burst size of a queue | |
Context | configure qos queue-group-templates egress queue-group string queue number burst-limit (number | keyword) | |
Tree | burst-limit | |
Range | 1 to 14000000 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
cbs (number | keyword)
Synopsis | Reserved buffer space for the queue | |
Context | configure qos queue-group-templates egress queue-group string queue number cbs (number | keyword) | |
Tree | cbs | |
Range | 0 to 1048576 | |
Units | kilobytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
drop-tail
Synopsis | Enter the drop-tail context | |
Context | configure qos queue-group-templates egress queue-group string queue number drop-tail | |
Tree | drop-tail | |
Introduced | 16.0.R1 | |
Platforms | All |
exceed
Synopsis | Enter the exceed context | |
Context | configure qos queue-group-templates egress queue-group string queue number drop-tail exceed | |
Tree | exceed | |
Introduced | 16.0.R1 | |
Platforms | All |
percent-reduction-from-mbs (number | keyword)
Synopsis | Percentage reduction from the MBS for a queue drop tail | |
Context | configure qos queue-group-templates egress queue-group string queue number drop-tail exceed percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
high
Synopsis | Enter the high context | |
Context | configure qos queue-group-templates egress queue-group string queue number drop-tail high | |
Tree | high | |
Introduced | 16.0.R1 | |
Platforms | All |
percent-reduction-from-mbs (number | keyword)
Synopsis | Percentage reduction from the MBS for a queue drop tail | |
Context | configure qos queue-group-templates egress queue-group string queue number drop-tail high percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
highplus
Synopsis | Enter the highplus context | |
Context | configure qos queue-group-templates egress queue-group string queue number drop-tail highplus | |
Tree | highplus | |
Introduced | 16.0.R1 | |
Platforms | All |
percent-reduction-from-mbs (number | keyword)
Synopsis | Percentage reduction from the MBS for a queue drop tail | |
Context | configure qos queue-group-templates egress queue-group string queue number drop-tail highplus percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
low
Synopsis | Enter the low context | |
Context | configure qos queue-group-templates egress queue-group string queue number drop-tail low | |
Tree | low | |
Introduced | 16.0.R1 | |
Platforms | All |
percent-reduction-from-mbs (number | keyword)
Synopsis | Low drop-tail percent from MBS that is reduced | |
Context | configure qos queue-group-templates egress queue-group string queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
dynamic-mbs boolean
Synopsis | Allow MBS size modification to maintain maximum latency | |
Context | configure qos queue-group-templates egress queue-group string queue number dynamic-mbs boolean | |
Tree | dynamic-mbs | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
hs-alt-port-class-pool boolean
Synopsis | Use HS alternate class port pool buffer for traffic | |
Context | configure qos queue-group-templates egress queue-group string queue number hs-alt-port-class-pool boolean | |
Tree | hs-alt-port-class-pool | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
Synopsis | Scheduling class weight | |
Context | configure qos queue-group-templates egress queue-group string queue number hs-class-weight number | |
Tree | hs-class-weight | |
Range | 1 | 2 | 4 | 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
hs-wred-queue
Synopsis | Enter the hs-wred-queue context | |
Context | configure qos queue-group-templates egress queue-group string queue number hs-wred-queue | |
Tree | hs-wred-queue | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
Synopsis | Slope policy name | |
Context | configure qos queue-group-templates egress queue-group string queue number hs-wred-queue policy reference | |
Tree | policy | |
Reference | configure qos slope-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
Synopsis | WRR weight with which queue parents into the scheduler | |
Context | configure qos queue-group-templates egress queue-group string queue number hs-wrr-weight number | |
Tree | hs-wrr-weight | |
Range | 1 to 127 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
mbs (number | keyword)
Synopsis | Buffer space allowed for the queue | |
Context | configure qos queue-group-templates egress queue-group string queue number mbs (number | keyword) | |
Tree | mbs | |
Range | 0 to 1073741824 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
packet-byte-offset number
Synopsis | Packet byte offset for addition of policing information | |
Context | configure qos queue-group-templates egress queue-group string queue number packet-byte-offset number | |
Tree | packet-byte-offset | |
Range | -64 to 31 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos queue-group-templates egress queue-group string queue number percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
Synopsis | Administrative CIR percent | |
Context | configure qos queue-group-templates egress queue-group string queue number percent-rate cir decimal-number | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Introduced | 16.0.R1 | |
Platforms |
All |
pir decimal-number
Synopsis | Administrative PIR percent | |
Context | configure qos queue-group-templates egress queue-group string queue number percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 16.0.R1 | |
Platforms | All |
reference-rate keyword
Synopsis | Reference rate | |
Context | configure qos queue-group-templates egress queue-group string queue number percent-rate reference-rate keyword | |
Tree | reference-rate | |
Options | ||
Default | port-limit | |
Introduced | 20.10.R1 | |
Platforms | All |
port-parent
Synopsis | Enable the port-parent context | |
Context | configure qos queue-group-templates egress queue-group string queue number port-parent | |
Tree | port-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
Synopsis | Port priority to receive bandwidth for within-CIR pass | |
Context | configure qos queue-group-templates egress queue-group string queue number port-parent cir-level number | |
Tree | cir-level | |
Range | 0 to 8 | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-weight number
Synopsis | Weight used at the within-CIR port priority level | |
Context | configure qos queue-group-templates egress queue-group string queue number port-parent cir-weight number | |
Tree | cir-weight | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
level number
Synopsis | Port priority for bandwidth for above-CIR offered load | |
Context | configure qos queue-group-templates egress queue-group string queue number port-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Introduced | 16.0.R1 | |
Platforms | All |
weight number
Synopsis | Weight used at above-CIR port priority level | |
Context | configure qos queue-group-templates egress queue-group string queue number port-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
queue-delay number
Synopsis | Target queue delay for forwarding packets through queue | |
Context | configure qos queue-group-templates egress queue-group string queue number queue-delay number | |
Tree | queue-delay | |
Range | 1 to 5000 | |
Units | milliseconds | |
Introduced | 16.0.R1 | |
Platforms |
All |
queue-type keyword
Synopsis | Method used to service queue from hardware perspective | |
Context | configure qos queue-group-templates egress queue-group string queue number queue-type keyword | |
Tree | queue-type | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
rate
Synopsis | Enter the rate context | |
Context | configure qos queue-group-templates egress queue-group string queue number rate | |
Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
Synopsis | Administrative CIR | |
Context | configure qos queue-group-templates egress queue-group string queue number rate cir (number | keyword) | |
Tree | cir | |
Range | 0 to 2000000000 | |
Units | kilobps | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
pir (number | keyword)
Synopsis | Administrative PIR | |
Context | configure qos queue-group-templates egress queue-group string queue number rate pir (number | keyword) | |
Tree | pir | |
Range | 1 to 2000000000 | |
Units | kilobps | |
Options | ||
Default | max | |
Introduced | 16.0.R1 | |
Platforms | All |
scheduler-parent
Synopsis | Enable the scheduler-parent context | |
Context | configure qos queue-group-templates egress queue-group string queue number scheduler-parent | |
Tree | scheduler-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos queue-group-templates egress queue-group string queue number scheduler-parent cir-level number | |
Tree | cir-level | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
Synopsis | Weight used at the within-CIR port priority level | |
Context | configure qos queue-group-templates egress queue-group string queue number scheduler-parent cir-weight number | |
Tree | cir-weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos queue-group-templates egress queue-group string queue number scheduler-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
scheduler-name string
Synopsis | Parent scheduler name | |
Context | configure qos queue-group-templates egress queue-group string queue number scheduler-parent scheduler-name string | |
Tree | scheduler-name | |
Description | This command associates a scheduler name to a queue. The scheduler name must have previously been defined within an existing scheduler policy and exist on each SAP the queue is created on. There are no checks performed to ensure that the scheduler name exists within an existing scheduler policy. Until the scheduler name exists on the egress SAP, the queue operates in an orphaned state. | |
String Length | 1 to 32 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
weight number
Synopsis | Weight used by the scheduler for feeding the queue | |
Context | configure qos queue-group-templates egress queue-group string queue number scheduler-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
wred-queue
Synopsis | Enter the wred-queue context | |
Context | configure qos queue-group-templates egress queue-group string queue number wred-queue | |
Tree | wred-queue | |
Introduced | 16.0.R1 | |
Platforms | All |
mode keyword
Synopsis | Pool association to allow queue-specific WRED slopes | |
Context | configure qos queue-group-templates egress queue-group string queue number wred-queue mode keyword | |
Tree | mode | |
Options | ||
Introduced | 16.0.R1 | |
Platforms | All |
policy reference
Synopsis | Slope policy name | |
Context | configure qos queue-group-templates egress queue-group string queue number wred-queue policy reference | |
Tree | policy | |
Reference | configure qos slope-policy string | |
Introduced | 16.0.R1 | |
Platforms | All |
usage keyword
Synopsis | Congestion control type | |
Context | configure qos queue-group-templates egress queue-group string queue number wred-queue usage keyword | |
Tree | usage | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
queues-hqos-manageable boolean
Synopsis | Manage queues through the Hierarchical QoS process | |
Context | configure qos queue-group-templates egress queue-group string queues-hqos-manageable boolean | |
Tree | queues-hqos-manageable | |
Default | true | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, VSR |
ingress
Synopsis | Enter the ingress context | |
Context | configure qos queue-group-templates ingress | |
Tree | ingress | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-group [ingress-queue-group-name] string
Synopsis | Enter the queue-group list instance | |
Context | configure qos queue-group-templates ingress queue-group string | |
Tree | queue-group | |
Introduced | 16.0.R1 | |
Platforms | All |
[ingress-queue-group-name] string
Synopsis | Ingress queue group template name | |
Context | configure qos queue-group-templates ingress queue-group string | |
Tree | queue-group | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos queue-group-templates ingress queue-group string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
policer [policer-id] number
Synopsis | Enter the policer list instance | |
Context | configure qos queue-group-templates ingress queue-group string policer number | |
Tree | policer | |
Introduced | 16.0.R1 | |
Platforms | All |
[policer-id] number
Synopsis | Ingress Queue-Group Policer identifier | |
Context | configure qos queue-group-templates ingress queue-group string policer number | |
Tree | policer | |
Range | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos queue-group-templates ingress queue-group string policer number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
Synopsis | Constraint used when deriving the operational CIR value | |
Context | configure qos queue-group-templates ingress queue-group string policer number adaptation-rule cir keyword | |
Tree | cir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos queue-group-templates ingress queue-group string policer number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
adv-config-policy reference
Synopsis | Advanced QoS policy name | |
Context | configure qos queue-group-templates ingress queue-group string policer number adv-config-policy reference | |
Tree | adv-config-policy | |
Reference | configure qos adv-config-policy string | |
Introduced | 16.0.R1 | |
Platforms | All |
arbiter-parent
Synopsis | Enter the arbiter-parent context | |
Context | configure qos queue-group-templates ingress queue-group string policer number arbiter-parent | |
Tree | arbiter-parent | |
Introduced | 16.0.R1 | |
Platforms | All |
arbiter-name string
Synopsis | Arbiter name | |
Context | configure qos queue-group-templates ingress queue-group string policer number arbiter-parent arbiter-name string | |
Tree | arbiter-name | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos queue-group-templates ingress queue-group string policer number arbiter-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
weight number
Synopsis | Weight used by the arbiter for feeding the policer | |
Context | configure qos queue-group-templates ingress queue-group string policer number arbiter-parent weight number | |
Tree | weight | |
Range | 1 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cbs (number | keyword)
Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
Context | configure qos queue-group-templates ingress queue-group string policer number cbs (number | keyword) | |
Tree | cbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos queue-group-templates ingress queue-group string policer number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
high-prio-only (number | keyword)
Synopsis | Percentage of MBS reserved for high priority traffic | |
Context | configure qos queue-group-templates ingress queue-group string policer number high-prio-only (number | keyword) | |
Tree | high-prio-only | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
mbs (number | keyword)
Synopsis | Maximum buffer size for the template queue | |
Context | configure qos queue-group-templates ingress queue-group string policer number mbs (number | keyword) | |
Tree | mbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
packet-byte-offset number
Synopsis | Packet size modification for policing information | |
Context | configure qos queue-group-templates ingress queue-group string policer number packet-byte-offset number | |
Tree | packet-byte-offset | |
Range | -32 to 31 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos queue-group-templates ingress queue-group string policer number percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 20.2.R1 | |
Platforms | All |
cir decimal-number
Synopsis | Administrative CIR | |
Context | configure qos queue-group-templates ingress queue-group string policer number percent-rate cir decimal-number | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Introduced | 20.2.R1 | |
Platforms |
All |
pir decimal-number
Synopsis | Administrative PIR | |
Context | configure qos queue-group-templates ingress queue-group string policer number percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 20.2.R1 | |
Platforms | All |
profile-capped boolean
Synopsis | Enforce a limit on the profile | |
Context | configure qos queue-group-templates ingress queue-group string policer number profile-capped boolean | |
Tree | profile-capped | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
rate
Synopsis | Enter the rate context | |
Context | configure qos queue-group-templates ingress queue-group string policer number rate | |
Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
Synopsis | Administrative CIR | |
Context | configure qos queue-group-templates ingress queue-group string policer number rate cir (number | keyword) | |
Tree | cir | |
Range | 0 to 2000000000 | |
Units | kilobps | |
Options | ||
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms | All |
pir (number | keyword)
Synopsis | Administrative PIR | |
Context | configure qos queue-group-templates ingress queue-group string policer number rate pir (number | keyword) | |
Tree | pir | |
Range | 1 to 2000000000 | |
Units | kilobps | |
Options | ||
Default | max | |
Introduced | 16.0.R1 | |
Platforms | All |
stat-mode keyword
Synopsis | Mode of statistics collected by the policer | |
Context | configure qos queue-group-templates ingress queue-group string policer number stat-mode keyword | |
Tree | stat-mode | |
Options | ||
Default | minimal | |
Introduced | 16.0.R1 | |
Platforms | All |
queue [queue-id] number
Synopsis | Enter the queue list instance | |
Context | configure qos queue-group-templates ingress queue-group string queue number | |
Tree | queue | |
Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
Synopsis | Ingress Queue-Group Queue identifier | |
Context | configure qos queue-group-templates ingress queue-group string queue number | |
Tree | queue | |
Range | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos queue-group-templates ingress queue-group string queue number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
Synopsis | Constraint for deriving operational CIR for the queue | |
Context | configure qos queue-group-templates ingress queue-group string queue number adaptation-rule cir keyword | |
Tree | cir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
fir keyword
Synopsis | Constraint for deriving operational FIR for the queue | |
Context | configure qos queue-group-templates ingress queue-group string queue number adaptation-rule fir keyword | |
Tree | fir | |
Options | ||
Default | closest | |
Introduced | 16.0.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
pir keyword
Synopsis | Constraint for deriving operational FIR for the queue | |
Context | configure qos queue-group-templates ingress queue-group string queue number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
adv-config-policy reference
Synopsis | Advanced QoS policy name | |
Context | configure qos queue-group-templates ingress queue-group string queue number adv-config-policy reference | |
Tree | adv-config-policy | |
Reference | configure qos adv-config-policy string | |
Introduced | 16.0.R1 | |
Platforms | All |
burst-limit (number | keyword)
Synopsis | Explicit shaping burst size of a queue | |
Context | configure qos queue-group-templates ingress queue-group string queue number burst-limit (number | keyword) | |
Tree | burst-limit | |
Range | 1 to 14000000 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
cbs (number | keyword)
Synopsis | Reserved buffer space for the queue | |
Context | configure qos queue-group-templates ingress queue-group string queue number cbs (number | keyword) | |
Tree | cbs | |
Range | 0 to 1048576 | |
Units | kilobytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-non-profiling boolean
Synopsis | Prevent profile modification of CIR dependent packet | |
Context | configure qos queue-group-templates ingress queue-group string queue number cir-non-profiling boolean | |
Tree | cir-non-profiling | |
Description | When configured to true, the system prevents the modification of the profile of a packet-dependent queue rate compared to its configured CIR. The CIR continues to be used to affect the scheduling priority of a queue. This command is only supported on hardware that is FP4-based and later and is ignored when the related policy is applied to FP3-based hardware. This command should not be configured under an ingress queue group template queue associated with a LAG which spans FP4-based and later and FP3-based hardware as the resulting operation could be different depending on which hardware type the traffic ingresses. | |
Default | false | |
Introduced | 16.0.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
drop-tail
Synopsis | Enter the drop-tail context | |
Context | configure qos queue-group-templates ingress queue-group string queue number drop-tail | |
Tree | drop-tail | |
Introduced | 16.0.R1 | |
Platforms | All |
low
Synopsis | Enter the low context | |
Context | configure qos queue-group-templates ingress queue-group string queue number drop-tail low | |
Tree | low | |
Introduced | 16.0.R1 | |
Platforms | All |
percent-reduction-from-mbs (number | keyword)
Synopsis | Low drop-tail percent from MBS that is reduced | |
Context | configure qos queue-group-templates ingress queue-group string queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
mbs (number | keyword)
Synopsis | Maximum buffer space that is allowed for queue | |
Context | configure qos queue-group-templates ingress queue-group string queue number mbs (number | keyword) | |
Tree | mbs | |
Range | 0 to 1073741824 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
multipoint boolean
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Create an ingress multipoint queue | |
Context | configure qos queue-group-templates ingress queue-group string queue number multipoint boolean | |
Tree | multipoint | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
packet-byte-offset number
Synopsis | Packet size modification for queue accounting | |
Context | configure qos queue-group-templates ingress queue-group string queue number packet-byte-offset number | |
Tree | packet-byte-offset | |
Range | -32 to 31 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos queue-group-templates ingress queue-group string queue number percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 20.10.R1 | |
Platforms | All |
cir decimal-number
Synopsis | Administrative CIR | |
Context | configure qos queue-group-templates ingress queue-group string queue number percent-rate cir decimal-number | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
Introduced | 20.10.R1 | |
Platforms | All |
fir decimal-number
Synopsis | Administrative FIR | |
Context | configure qos queue-group-templates ingress queue-group string queue number percent-rate fir decimal-number | |
Tree | fir | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
Introduced | 20.10.R1 | |
Platforms | All |
pir decimal-number
Synopsis | Administrative PIR | |
Context | configure qos queue-group-templates ingress queue-group string queue number percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 20.10.R1 | |
Platforms | All |
police
Synopsis | Drop out-of-profile traffic feeding into physical queue | |
Context | configure qos queue-group-templates ingress queue-group string queue number percent-rate police | |
Tree | police | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
Introduced | 20.10.R1 | |
Platforms | All |
reference-rate keyword
Synopsis | Reference rate | |
Context | configure qos queue-group-templates ingress queue-group string queue number percent-rate reference-rate keyword | |
Tree | reference-rate | |
Options | ||
Default | port-limit | |
Introduced | 20.10.R1 | |
Platforms | All |
queue-mode keyword
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Queue operational mode for explicitly profiled packets | |
Context | configure qos queue-group-templates ingress queue-group string queue number queue-mode keyword | |
Tree | queue-mode | |
Options | ||
Default | priority | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-type keyword
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Priority that this queue receives from the hardware level schedulers | |
Context | configure qos queue-group-templates ingress queue-group string queue number queue-type keyword | |
Tree | queue-type | |
Options | ||
Default | best-effort | |
Introduced | 16.0.R1 | |
Platforms | All |
rate
Synopsis | Enter the rate context | |
Context | configure qos queue-group-templates ingress queue-group string queue number rate | |
Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
Synopsis | Administrative CIR | |
Context | configure qos queue-group-templates ingress queue-group string queue number rate cir (number | keyword) | |
Tree | cir | |
Range | 0 to 2000000000 | |
Units | kilobps | |
Options | ||
Default | 0 | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
Introduced | 16.0.R1 | |
Platforms | All |
fir (number | keyword)
Synopsis | Administrative FIR | |
Context | configure qos queue-group-templates ingress queue-group string queue number rate fir (number | keyword) | |
Tree | fir | |
Range | 0 to 2000000000 | |
Units | kilobps | |
Options | ||
Default | 0 | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
Introduced | 16.0.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
pir (number | keyword)
Synopsis | Administrative PIR | |
Context | configure qos queue-group-templates ingress queue-group string queue number rate pir (number | keyword) | |
Tree | pir | |
Range | 1 to 2000000000 | |
Units | kilobps | |
Options | ||
Default | max | |
Introduced | 16.0.R1 | |
Platforms | All |
police
Synopsis | Drop out-of-profile traffic feeding into queue instance | |
Context | configure qos queue-group-templates ingress queue-group string queue number rate police | |
Tree | police | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
Introduced | 16.0.R1 | |
Platforms | All |
scheduler-parent
Synopsis | Enter the scheduler-parent context | |
Context | configure qos queue-group-templates ingress queue-group string queue number scheduler-parent | |
Tree | scheduler-parent | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos queue-group-templates ingress queue-group string queue number scheduler-parent cir-level number | |
Tree | cir-level | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
Synopsis | Weight used at the within-CIR port priority level | |
Context | configure qos queue-group-templates ingress queue-group string queue number scheduler-parent cir-weight number | |
Tree | cir-weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos queue-group-templates ingress queue-group string queue number scheduler-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
scheduler-name string
Synopsis | Scheduler name | |
Context | configure qos queue-group-templates ingress queue-group string queue number scheduler-parent scheduler-name string | |
Tree | scheduler-name | |
Description | This command associates a scheduler name to a queue. The scheduler name must have previously been defined within an existing scheduler policy and exist on each SAP the queue is created on. There are no checks performed to ensure that the scheduler name exists within an existing scheduler policy. Until the scheduler name exists on the egress SAP, the queue operates in an orphaned state. | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
weight number
Synopsis | Weight used by the scheduler for feeding the queue | |
Context | configure qos queue-group-templates ingress queue-group string queue number scheduler-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
sap-egress [sap-egress-policy-name] string
Synopsis | Enter the sap-egress list instance | |
Context | configure qos sap-egress string | |
Tree | sap-egress | |
Introduced | 16.0.R1 | |
Platforms | All |
[sap-egress-policy-name] string
Synopsis | Policy name | |
Context | configure qos sap-egress string | |
Tree | sap-egress | |
String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos sap-egress string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
dot1p [dot1p-value] number
Synopsis | Enter the dot1p list instance | |
Context | configure qos sap-egress string dot1p number | |
Tree | dot1p | |
Introduced | 16.0.R1 | |
Platforms | All |
[dot1p-value] number
Synopsis | Dot1p value to match in the packet | |
Context | configure qos sap-egress string dot1p number | |
Tree | dot1p | |
Range | 0 to 7 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
Synopsis | Forwarding class | |
Context | configure qos sap-egress string dot1p number fc keyword | |
Tree | fc | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
profile keyword
Synopsis | Default profile for the ingressing traffic | |
Context | configure qos sap-egress string dot1p number profile keyword | |
Tree | profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms | All |
dscp [dscp-name] keyword
Synopsis | Enter the dscp list instance | |
Context | configure qos sap-egress string dscp keyword | |
Tree | dscp | |
Introduced | 16.0.R1 | |
Platforms | All |
[dscp-name] keyword
Synopsis | DSCP name to perform reclassification actions | |
Context | configure qos sap-egress string dscp keyword | |
Tree | dscp | |
Options | ||
Notes |
This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
Synopsis | Forwarding class | |
Context | configure qos sap-egress string dscp keyword fc keyword | |
Tree | fc | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
profile keyword
Synopsis | Default profile for the ingressing traffic | |
Context | configure qos sap-egress string dscp keyword profile keyword | |
Tree | profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
ethernet-ctag boolean
Synopsis | Tag value for dot1p and DE (Drop-Eligible) that are used by all dot1-p entries | |
Context | configure qos sap-egress string ethernet-ctag boolean | |
Tree | ethernet-ctag | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
fc [fc-name] keyword
Synopsis | Enter the fc list instance | |
Context | configure qos sap-egress string fc keyword | |
Tree | fc | |
Introduced | 16.0.R1 | |
Platforms | All |
[fc-name] keyword
Synopsis | Forwarding class | |
Context | configure qos sap-egress string fc keyword | |
Tree | fc | |
Options | ||
Notes |
This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
de-mark
Synopsis | Enable the de-mark context | |
Context | configure qos sap-egress string fc keyword de-mark | |
Tree | de-mark | |
Introduced | 16.0.R1 | |
Platforms | All |
force number
de-mark-inner
Synopsis | Enable the de-mark-inner context | |
Context | configure qos sap-egress string fc keyword de-mark-inner | |
Tree | de-mark-inner | |
Introduced | 16.0.R1 | |
Platforms | All |
force number
Synopsis | DE value to set in inner VLAN tag | |
Context | configure qos sap-egress string fc keyword de-mark-inner force number | |
Tree | force | |
Range | 0 to 1 | |
Introduced | 16.0.R1 | |
Platforms | All |
de-mark-outer
Synopsis | Enable the de-mark-outer context | |
Context | configure qos sap-egress string fc keyword de-mark-outer | |
Tree | de-mark-outer | |
Introduced | 16.0.R1 | |
Platforms | All |
force number
Synopsis | DE value to set in outer VLAN tag | |
Context | configure qos sap-egress string fc keyword de-mark-outer force number | |
Tree | force | |
Range | 0 to 1 | |
Introduced | 16.0.R1 | |
Platforms | All |
dot1p
Synopsis | Enter the dot1p context | |
Context | configure qos sap-egress string fc keyword dot1p | |
Tree | dot1p | |
Introduced | 16.0.R1 | |
Platforms | All |
exceed-profile number
Synopsis | Dot1p value for exceed-profile frames | |
Context | configure qos sap-egress string fc keyword dot1p exceed-profile number | |
Tree | exceed-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
in-profile number
Synopsis | Dot1p value for in-profile frames | |
Context | configure qos sap-egress string fc keyword dot1p in-profile number | |
Tree | in-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
out-profile number
Synopsis | Dot1p value for out-of-profile frames | |
Context | configure qos sap-egress string fc keyword dot1p out-profile number | |
Tree | out-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
dot1p-inner
Synopsis | Enter the dot1p-inner context | |
Context | configure qos sap-egress string fc keyword dot1p-inner | |
Tree | dot1p-inner | |
Introduced | 16.0.R1 | |
Platforms | All |
exceed-profile number
Synopsis | Inner Dot1p value for exceed-profile frames | |
Context | configure qos sap-egress string fc keyword dot1p-inner exceed-profile number | |
Tree | exceed-profile | |
Range | 0 to 7 | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
in-profile number
Synopsis | Inner Dot1p value for in-profile frames | |
Context | configure qos sap-egress string fc keyword dot1p-inner in-profile number | |
Tree | in-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
out-profile number
Synopsis | Inner Dot1p value for out-of-profile frames | |
Context | configure qos sap-egress string fc keyword dot1p-inner out-profile number | |
Tree | out-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
dot1p-outer
Synopsis | Enter the dot1p-outer context | |
Context | configure qos sap-egress string fc keyword dot1p-outer | |
Tree | dot1p-outer | |
Introduced | 16.0.R1 | |
Platforms | All |
exceed-profile number
Synopsis | Outer Dot1p value for exceed-profile frames | |
Context | configure qos sap-egress string fc keyword dot1p-outer exceed-profile number | |
Tree | exceed-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
in-profile number
Synopsis | Outer Dot1p value for in-profile frames | |
Context | configure qos sap-egress string fc keyword dot1p-outer in-profile number | |
Tree | in-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
out-profile number
Synopsis | Outer Dot1p value for out-of-profile frames | |
Context | configure qos sap-egress string fc keyword dot1p-outer out-profile number | |
Tree | out-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
dscp
Synopsis | Enter the dscp context | |
Context | configure qos sap-egress string fc keyword dscp | |
Tree | dscp | |
Notes | The following elements are part of a choice: dscp or prec. | |
Introduced | 16.0.R1 | |
Platforms | All |
exceed-profile keyword
Synopsis | DSCP name for exceed-profile frames | |
Context | configure qos sap-egress string fc keyword dscp exceed-profile keyword | |
Tree | exceed-profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
in-profile keyword
Synopsis | DSCP name for in-profile frames | |
Context | configure qos sap-egress string fc keyword dscp in-profile keyword | |
Tree | in-profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
out-profile keyword
Synopsis | DSCP name for out-of-profile frames | |
Context | configure qos sap-egress string fc keyword dscp out-profile keyword | |
Tree | out-profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
policer reference
Synopsis | Policer to forward the traffic | |
Context | configure qos sap-egress string fc keyword policer reference | |
Tree | policer | |
Reference | configure qos sap-egress string policer number | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
port-redirect-group-queue
Synopsis | Enable the port-redirect-group-queue context | |
Context | configure qos sap-egress string fc keyword port-redirect-group-queue | |
Tree | port-redirect-group-queue | |
Notes | The following elements are part of a choice: port-redirect-group-queue, queue, or queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue number
Synopsis | Queue to forward the traffic | |
Context | configure qos sap-egress string fc keyword port-redirect-group-queue queue number | |
Tree | queue | |
Range | 1 to 8 | |
Introduced | 16.0.R1 | |
Platforms | All |
prec
Synopsis | Enter the prec context | |
Context | configure qos sap-egress string fc keyword prec | |
Tree | prec | |
Notes | The following elements are part of a choice: dscp or prec. | |
Introduced | 16.0.R1 | |
Platforms | All |
exceed-profile number
Synopsis | Precedence for exceed-profile frames | |
Context | configure qos sap-egress string fc keyword prec exceed-profile number | |
Tree | exceed-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
in-profile number
Synopsis | Precedence value for in-profile frames | |
Context | configure qos sap-egress string fc keyword prec in-profile number | |
Tree | in-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
out-profile number
Synopsis | Precedence value for out-of-profile frames | |
Context | configure qos sap-egress string fc keyword prec out-profile number | |
Tree | out-profile | |
Range | 0 to 7 | |
Introduced | 16.0.R1 | |
Platforms | All |
queue reference
Synopsis | Queue to forward the traffic | |
Context | configure qos sap-egress string fc keyword queue reference | |
Tree | queue | |
Reference | configure qos sap-egress string queue number | |
Notes | The following elements are part of a choice: port-redirect-group-queue, queue, or queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-group-queue
Synopsis | Enable the queue-group-queue context | |
Context | configure qos sap-egress string fc keyword queue-group-queue | |
Tree | queue-group-queue | |
Notes | The following elements are part of a choice: port-redirect-group-queue, queue, or queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
instance number
Synopsis | Instance ID | |
Context | configure qos sap-egress string fc keyword queue-group-queue instance number | |
Tree | instance | |
Range | 1 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
queue reference
Synopsis | SAP egress queue ID | |
Context | configure qos sap-egress string fc keyword queue-group-queue queue reference | |
Tree | queue | |
Reference | configure qos queue-group-templates egress queue-group string queue number | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-group-name reference
Synopsis | Queue group to forward traffic | |
Context | configure qos sap-egress string fc keyword queue-group-queue queue-group-name reference | |
Tree | queue-group-name | |
Reference | configure qos queue-group-templates egress queue-group string | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
hs-attachment-policy reference
Synopsis | HS attachment policy applied | |
Context | configure qos sap-egress string hs-attachment-policy reference | |
Tree | hs-attachment-policy | |
Reference | configure qos hs-attachment-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-group [group-id] number
Synopsis | Enter the hs-wrr-group list instance | |
Context | configure qos sap-egress string hs-wrr-group number | |
Tree | hs-wrr-group | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
[group-id] number
Synopsis | HS WRR group identifier | |
Context | configure qos sap-egress string hs-wrr-group number | |
Tree | hs-wrr-group | |
Range | 1 to 2 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos sap-egress string hs-wrr-group number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos sap-egress string hs-wrr-group number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
Synopsis | Weight of scheduling class | |
Context | configure qos sap-egress string hs-wrr-group number hs-class-weight number | |
Tree | hs-class-weight | |
Range | 1 | 2 | 4 | 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
percent-rate decimal-number
Synopsis | Administrative PIR percent | |
Context | configure qos sap-egress string hs-wrr-group number percent-rate decimal-number | |
Tree | percent-rate | |
Range | 0.01 to 100.00 | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
rate (number | keyword)
Synopsis | Administrative PIR | |
Context | configure qos sap-egress string hs-wrr-group number rate (number | keyword) | |
Tree | rate | |
Range | 1 to 2000000000 | |
Units | kilobps | |
Options | ||
Default | max | |
Notes |
The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hw-agg-shaper-queues
Synopsis | Enter the hw-agg-shaper-queues context | |
Context | configure qos sap-egress string hw-agg-shaper-queues | |
Tree | hw-agg-shaper-queues | |
Description | Commands in this context configure the queue resources from which to draw for a given object (for example, a subscriber host or SAP). | |
Introduced | 23.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
queue-set-size (number | keyword)
Synopsis | Queue resource allocation for the SAP egress policy | |
Context | configure qos sap-egress string hw-agg-shaper-queues queue-set-size (number | keyword) | |
Tree | queue-set-size | |
Description | This command configures the queue-set size or non-shaper-queue to use for this SAP egress policy. | |
Range | 2 to 8 | |
Options | ||
Introduced | 23.10.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
ip-criteria
Synopsis | Enter the ip-criteria context | |
Context | configure qos sap-egress string ip-criteria | |
Tree | ip-criteria | |
Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
Synopsis | Enter the entry list instance | |
Context | configure qos sap-egress string ip-criteria entry number | |
Tree | entry | |
Introduced | 16.0.R1 | |
Platforms | All |
[entry-id] number
Synopsis | IP Criteria Entry Index | |
Context | configure qos sap-egress string ip-criteria entry number | |
Tree | entry | |
Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
action
Synopsis | Enter the action context | |
Context | configure qos sap-egress string ip-criteria entry number action | |
Tree | action | |
Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
Synopsis | Forwarding class | |
Context | configure qos sap-egress string ip-criteria entry number action fc keyword | |
Tree | fc | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
policer reference
Synopsis | Policer identifier for the matched traffic | |
Context | configure qos sap-egress string ip-criteria entry number action policer reference | |
Tree | policer | |
Reference | configure qos sap-egress string policer number | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
port-redirect-group-queue boolean
Synopsis | Use queue specified in egress access port queue group | |
Context | configure qos sap-egress string ip-criteria entry number action port-redirect-group-queue boolean | |
Tree | port-redirect-group-queue | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
profile keyword
Synopsis | Default profile for the matching traffic | |
Context | configure qos sap-egress string ip-criteria entry number action profile keyword | |
Tree | profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
queue number
Synopsis | Queue used for matched traffic policed by local policer | |
Context | configure qos sap-egress string ip-criteria entry number action queue number | |
Tree | queue | |
Range | 1 to 8 | |
Introduced | 16.0.R1 | |
Platforms | All |
type keyword
Synopsis | Action for criteria entry | |
Context | configure qos sap-egress string ip-criteria entry number action type keyword | |
Tree | type | |
Options | ||
Default | ignore-match | |
Introduced | 16.0.R1 | |
Platforms |
All |
use-fc-mapped-queue boolean
Synopsis | Redirect policer output to the configured queues | |
Context | configure qos sap-egress string ip-criteria entry number action use-fc-mapped-queue boolean | |
Tree | use-fc-mapped-queue | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos sap-egress string ip-criteria entry number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
match
Synopsis | Enter the match context | |
Context | configure qos sap-egress string ip-criteria entry number match | |
Tree | match | |
Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
Synopsis | DSCP value to match in the packet | |
Context | configure qos sap-egress string ip-criteria entry number match dscp keyword | |
Tree | dscp | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
dst-ip
Synopsis | Enter the dst-ip context | |
Context | configure qos sap-egress string ip-criteria entry number match dst-ip | |
Tree | dst-ip | |
Introduced | 16.0.R1 | |
Platforms | All |
address (ipv4-prefix-with-host-bits | ipv4-address)
Synopsis | Destination IPv4 address for SAP QoS policy match | |
Context | configure qos sap-egress string ip-criteria entry number match dst-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
Synopsis | List of IPv4 prefixes for the match criteria | |
Context | configure qos sap-egress string ip-criteria entry number match dst-ip ip-prefix-list reference | |
Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
mask string
Synopsis | IP address mask to match with source IP of the packet | |
Context | configure qos sap-egress string ip-criteria entry number match dst-ip mask string | |
Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
dst-port
Synopsis | Enter the dst-port context | |
Context | configure qos sap-egress string ip-criteria entry number match dst-port | |
Tree | dst-port | |
Introduced | 16.0.R1 | |
Platforms | All |
eq number
Synopsis | Value 'equal to' as match condition | |
Context | configure qos sap-egress string ip-criteria entry number match dst-port eq number | |
Tree | eq | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
gt number
Synopsis | Value 'greater than' as match condition | |
Context | configure qos sap-egress string ip-criteria entry number match dst-port gt number | |
Tree | gt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
lt number
Synopsis | Value 'less than' as match condition | |
Context | configure qos sap-egress string ip-criteria entry number match dst-port lt number | |
Tree | lt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
range
Synopsis | Enter the range context | |
Context | configure qos sap-egress string ip-criteria entry number match dst-port range | |
Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
Synopsis | Upper bound of the port range | |
Context | configure qos sap-egress string ip-criteria entry number match dst-port range end number | |
Tree | end | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
Synopsis | Lower bound of the port range | |
Context | configure qos sap-egress string ip-criteria entry number match dst-port range start number | |
Tree | start | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
fragment keyword
Synopsis | Fragmented packets as the match criterion | |
Context | configure qos sap-egress string ip-criteria entry number match fragment keyword | |
Tree | fragment | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
protocol (number | keyword)
Synopsis | IP protocol to match | |
Context | configure qos sap-egress string ip-criteria entry number match protocol (number | keyword) | |
Tree | protocol | |
Range | 0 to 255 | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
Synopsis | Enter the src-ip context | |
Context | configure qos sap-egress string ip-criteria entry number match src-ip | |
Tree | src-ip | |
Introduced | 16.0.R1 | |
Platforms | All |
address (ipv4-prefix-with-host-bits | ipv4-address)
Synopsis | Source IPv4 address for SAP QoS policy match criterion | |
Context | configure qos sap-egress string ip-criteria entry number match src-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
Synopsis | List of IPv4 prefixes for the match criteria | |
Context | configure qos sap-egress string ip-criteria entry number match src-ip ip-prefix-list reference | |
Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
mask string
Synopsis | IP address mask to match with source IP of the packet | |
Context | configure qos sap-egress string ip-criteria entry number match src-ip mask string | |
Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
src-port
Synopsis | Enter the src-port context | |
Context | configure qos sap-egress string ip-criteria entry number match src-port | |
Tree | src-port | |
Introduced | 16.0.R1 | |
Platforms | All |
eq number
Synopsis | Value 'equal to' as match condition | |
Context | configure qos sap-egress string ip-criteria entry number match src-port eq number | |
Tree | eq | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
gt number
Synopsis | Value 'greater than' as match condition | |
Context | configure qos sap-egress string ip-criteria entry number match src-port gt number | |
Tree | gt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
lt number
Synopsis | Value 'less than' as match condition | |
Context | configure qos sap-egress string ip-criteria entry number match src-port lt number | |
Tree | lt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
range
Synopsis | Enter the range context | |
Context | configure qos sap-egress string ip-criteria entry number match src-port range | |
Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
Synopsis | Upper bound of the port range | |
Context | configure qos sap-egress string ip-criteria entry number match src-port range end number | |
Tree | end | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
Synopsis | Lower bound of the port range | |
Context | configure qos sap-egress string ip-criteria entry number match src-port range start number | |
Tree | start | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
ipv6-criteria
Synopsis | Enter the ipv6-criteria context | |
Context | configure qos sap-egress string ipv6-criteria | |
Tree | ipv6-criteria | |
Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
Synopsis | Enter the entry list instance | |
Context | configure qos sap-egress string ipv6-criteria entry number | |
Tree | entry | |
Introduced | 16.0.R1 | |
Platforms | All |
[entry-id] number
Synopsis | IP Criteria Entry Index | |
Context | configure qos sap-egress string ipv6-criteria entry number | |
Tree | entry | |
Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
action
Synopsis | Enter the action context | |
Context | configure qos sap-egress string ipv6-criteria entry number action | |
Tree | action | |
Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
Synopsis | Forwarding class | |
Context | configure qos sap-egress string ipv6-criteria entry number action fc keyword | |
Tree | fc | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
policer reference
Synopsis | Policer identifier for the matched traffic | |
Context | configure qos sap-egress string ipv6-criteria entry number action policer reference | |
Tree | policer | |
Reference | configure qos sap-egress string policer number | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
port-redirect-group-queue boolean
Synopsis | Use queue specified in egress access port queue group | |
Context | configure qos sap-egress string ipv6-criteria entry number action port-redirect-group-queue boolean | |
Tree | port-redirect-group-queue | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
profile keyword
Synopsis | Default profile for the matching traffic | |
Context | configure qos sap-egress string ipv6-criteria entry number action profile keyword | |
Tree | profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
queue number
Synopsis | Queue used for matched traffic policed by local policer | |
Context | configure qos sap-egress string ipv6-criteria entry number action queue number | |
Tree | queue | |
Range | 1 to 8 | |
Introduced | 16.0.R1 | |
Platforms | All |
type keyword
Synopsis | Action for criteria entry | |
Context | configure qos sap-egress string ipv6-criteria entry number action type keyword | |
Tree | type | |
Options | ||
Default | ignore-match | |
Introduced | 16.0.R1 | |
Platforms |
All |
use-fc-mapped-queue boolean
Synopsis | Redirect policer output to the configured queues | |
Context | configure qos sap-egress string ipv6-criteria entry number action use-fc-mapped-queue boolean | |
Tree | use-fc-mapped-queue | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos sap-egress string ipv6-criteria entry number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
match
Synopsis | Enter the match context | |
Context | configure qos sap-egress string ipv6-criteria entry number match | |
Tree | match | |
Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
Synopsis | DSCP value to match in the packet | |
Context | configure qos sap-egress string ipv6-criteria entry number match dscp keyword | |
Tree | dscp | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
dst-ip
Synopsis | Enter the dst-ip context | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-ip | |
Tree | dst-ip | |
Introduced | 16.0.R1 | |
Platforms | All |
address (ipv6-prefix-with-host-bits | ipv6-address)
Synopsis | Destination IPv6 address for SAP QoS policy match | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
Synopsis | IPv6 prefix list as match criterion for IPv6 addresses | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-ip ipv6-prefix-list reference | |
Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask string
Synopsis | IP address mask to match with destination IP of packet | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-ip mask string | |
Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
dst-port
Synopsis | Enter the dst-port context | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-port | |
Tree | dst-port | |
Introduced | 16.0.R1 | |
Platforms | All |
eq number
Synopsis | Value 'equal to' as match condition | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-port eq number | |
Tree | eq | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
gt number
Synopsis | Value 'greater than' as match condition | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-port gt number | |
Tree | gt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
lt number
Synopsis | Value 'less than' as match condition | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-port lt number | |
Tree | lt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
range
Synopsis | Enter the range context | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-port range | |
Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
Synopsis | Upper bound of the port range | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-port range end number | |
Tree | end | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
Synopsis | Lower bound of the port range | |
Context | configure qos sap-egress string ipv6-criteria entry number match dst-port range start number | |
Tree | start | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
next-header (number | keyword)
Synopsis | IP protocol to match | |
Context | configure qos sap-egress string ipv6-criteria entry number match next-header (number | keyword) | |
Tree | next-header | |
Range | 0 to 255 | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
Synopsis | Enter the src-ip context | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-ip | |
Tree | src-ip | |
Introduced | 16.0.R1 | |
Platforms | All |
address (ipv6-prefix-with-host-bits | ipv6-address)
Synopsis | Source IPv6 address for SAP QoS policy match | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
Synopsis | IPv6 prefix list as match criterion for IPv6 addresses | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-ip ipv6-prefix-list reference | |
Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask string
Synopsis | IP address mask to match with source IP of the packet | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-ip mask string | |
Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
src-port
Synopsis | Enter the src-port context | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-port | |
Tree | src-port | |
Introduced | 16.0.R1 | |
Platforms | All |
eq number
Synopsis | Value 'equal to' as match condition | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-port eq number | |
Tree | eq | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
gt number
Synopsis | Value 'greater than' as match condition | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-port gt number | |
Tree | gt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
lt number
Synopsis | Value 'less than' as match condition | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-port lt number | |
Tree | lt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
range
Synopsis | Enter the range context | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-port range | |
Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
Synopsis | Upper bound of the port range | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-port range end number | |
Tree | end | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
Synopsis | Lower bound of the port range | |
Context | configure qos sap-egress string ipv6-criteria entry number match src-port range start number | |
Tree | start | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
parent-location keyword
Synopsis | Location where queues look to find parent scheduler | |
Context | configure qos sap-egress string parent-location keyword | |
Tree | parent-location | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
policer [policer-id] number
Synopsis | Enter the policer list instance | |
Context | configure qos sap-egress string policer number | |
Tree | policer | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[policer-id] number
Synopsis | SAP egress policer ID | |
Context | configure qos sap-egress string policer number | |
Tree | policer | |
Range | 1 to 63 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos sap-egress string policer number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir keyword
Synopsis | Constraint used when deriving the operational CIR value | |
Context | configure qos sap-egress string policer number adaptation-rule cir keyword | |
Tree | cir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos sap-egress string policer number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adv-config-policy reference
Synopsis | Advanced QoS policy name | |
Context | configure qos sap-egress string policer number adv-config-policy reference | |
Tree | adv-config-policy | |
Reference | configure qos adv-config-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-parent
Synopsis | Enter the arbiter-parent context | |
Context | configure qos sap-egress string policer number arbiter-parent | |
Tree | arbiter-parent | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-name string
Synopsis | Arbiter name | |
Context | configure qos sap-egress string policer number arbiter-parent arbiter-name string | |
Tree | arbiter-name | |
Description | This command specifies an arbiter name. The policer is intended to become a child to one of the tiered arbiters with the specified arbiter name where an instance of the policer is created. If the specified arbiter name does not exist, the policer is placed in the orphan state. | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos sap-egress string policer number arbiter-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
Synopsis | Weight used by the arbiter for feeding the policer | |
Context | configure qos sap-egress string policer number arbiter-parent weight number | |
Tree | weight | |
Range | 1 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
Context | configure qos sap-egress string policer number cbs (number | keyword) | |
Tree | cbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description string
Synopsis | Text description | |
Context | configure qos sap-egress string policer number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
dscp-prec-remarking boolean
Synopsis | Remark DSCP/precedence based on packet profile state | |
Context | configure qos sap-egress string policer number dscp-prec-remarking boolean | |
Tree | dscp-prec-remarking | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
exceed-pir boolean
Synopsis | Forward packets exceeding the PIR as exceed-profile | |
Context | configure qos sap-egress string policer number exceed-pir boolean | |
Tree | exceed-pir | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
high-prio-only (number | keyword)
Synopsis | Percentage of MBS reserved for high priority traffic | |
Context | configure qos sap-egress string policer number high-prio-only (number | keyword) | |
Tree | high-prio-only | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs (number | keyword)
Synopsis | Maximum burst tolerance allowed by the policer | |
Context | configure qos sap-egress string policer number mbs (number | keyword) | |
Tree | mbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
packet-byte-offset number
Synopsis | Packet size modification for policing information | |
Context | configure qos sap-egress string policer number packet-byte-offset number | |
Tree | packet-byte-offset | |
Range | -64 to 31 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos sap-egress string policer number percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
Synopsis | Administrative CIR percent | |
Context | configure qos sap-egress string policer number percent-rate cir decimal-number | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir decimal-number
Synopsis | Administrative PIR percent | |
Context | configure qos sap-egress string policer number percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
reference-rate keyword
Synopsis | Reference rate | |
Context | configure qos sap-egress string policer number percent-rate reference-rate keyword | |
Tree | reference-rate | |
Options | ||
Default | local-limit | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
port-parent
Synopsis | Enable the port-parent context | |
Context | configure qos sap-egress string policer number port-parent | |
Tree | port-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir-level number
Synopsis | Port priority level for within-CIR offered load | |
Context | configure qos sap-egress string policer number port-parent cir-level number | |
Tree | cir-level | |
Description | This command defines the port priority that the policer uses to receive bandwidth for its within-CIR offered load. If this command is set to the default value, the policer does not receive bandwidth during the port schedulers with-CIR pass and the cir-weight command is ignored. | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir-weight number
Synopsis | Weight to use in the within-CIR port priority level | |
Context | configure qos sap-egress string policer number port-parent cir-weight number | |
Tree | cir-weight | |
Description | This command defines the weight that the policer uses at the within-CIR port priority level. All CIR weight values from all weighted active policers, queues, and schedulers with a common port parent are added together. Each individual active weight is then divided by the total to determine the percentage of remaining bandwidth provided to the policer, queue, or scheduler after the higher priority level children have been serviced. A weight is considered active when the applicable policer, queue, or scheduler has not reached its maximum rate and still has packets to transmit. When this command is set to the default value, the policer receives bandwidth only after other children with a non-zero weight at this level have been serviced. | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
Synopsis | Port priority level for above-CIR behavior | |
Context | configure qos sap-egress string policer number port-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
Synopsis | Weight to use in the above-CIR port priority level | |
Context | configure qos sap-egress string policer number port-parent weight number | |
Tree | weight | |
Description | This command defines the weight that the policer uses at the above-CIR port priority level. All weight values from all weighted active policers, queues, and schedulers with a common port parent are added together. Each individual active weight is then divided by the total to determine the percentage of remaining bandwidth provided to the policer, queue, or scheduler after the higher priority level children have been serviced. A weight is considered to be active when the applicable policer, queue, or scheduler has not reached its maximum rate and still has packets to transmit. When this command is set to a value of 0, the policer receives bandwidth only after other children with a non-zero weight at this level. | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile-capped boolean
Synopsis | Enforce overall in-profile burst limit to CIR bucket | |
Context | configure qos sap-egress string policer number profile-capped boolean | |
Tree | profile-capped | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile-out-preserve boolean
Synopsis | Preserve the color of offered out-of-profile traffic | |
Context | configure qos sap-egress string policer number profile-out-preserve boolean | |
Tree | profile-out-preserve | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
rate
Synopsis | Enter the rate context | |
Context | configure qos sap-egress string policer number rate | |
Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
pir (number | keyword)
scheduler-parent
Synopsis | Enable the scheduler-parent context | |
Context | configure qos sap-egress string policer number scheduler-parent | |
Tree | scheduler-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir-level number
Synopsis | Port priority level for within-CIR offered load | |
Context | configure qos sap-egress string policer number scheduler-parent cir-level number | |
Tree | cir-level | |
Description | This command defines the hierarchy priority level when compared with other policers, queues, and schedulers that the policer uses to receive bandwidth for its within-CIR offered load. If this command is set to the default value, the policer does not receive bandwidth during the schedulers within-CIR pass and the cir-weight command is ignored. | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir-weight number
Synopsis | Weight to use in the within-CIR port priority level | |
Context | configure qos sap-egress string policer number scheduler-parent cir-weight number | |
Tree | cir-weight | |
Description | The command defines the relative weight of the policer in comparison with other child policers, queues, or schedulers competing for bandwidth on the parent scheduler name at the within-CIR priority level. A weight is considered to be active when the applicable policer, queue, or scheduler has not reached its maximum rate and still has packets to transmit. When this command is set to a value of 0, the policer receives bandwidth only after the other children with a non-zero weight at this level have been serviced. | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
Synopsis | Priority level for bandwidth on the parent scheduler | |
Context | configure qos sap-egress string policer number scheduler-parent level number | |
Tree | level | |
Description | This command defines the priority level when compared with other policers, queues, and schedulers when competing for bandwidth on the parent scheduler. Children of the parent scheduler with a lower priority do not receive bandwidth until all children with a higher priority have either reached their maximum bandwidth or are idle. Children with the same level are serviced in relation to their relative weights. | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
scheduler-name string
Synopsis | Scheduler name | |
Context | configure qos sap-egress string policer number scheduler-parent scheduler-name string | |
Tree | scheduler-name | |
String Length | 1 to 32 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
Synopsis | Policer weight at the above-CIR priority level | |
Context | configure qos sap-egress string policer number scheduler-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
stat-mode keyword
Synopsis | Mode of statistics collected by the policer | |
Context | configure qos sap-egress string policer number stat-mode keyword | |
Tree | stat-mode | |
Options | ||
Default | minimal | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policers-hqos-manageable boolean
Synopsis | Manage policers through the Hierarchical QoS process | |
Context | configure qos sap-egress string policers-hqos-manageable boolean | |
Tree | policers-hqos-manageable | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, VSR |
policy-id number
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Egress SAP QoS policy ID | |
Context | configure qos sap-egress string policy-id number | |
Tree | policy-id | |
Range | 1 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
post-policer-mapping reference
Synopsis | Post policer mapping policy applied to this policy | |
Context | configure qos sap-egress string post-policer-mapping reference | |
Tree | post-policer-mapping | |
Reference | configure qos post-policer-mapping string | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
prec [prec-value] number
Synopsis | Enter the prec list instance | |
Context | configure qos sap-egress string prec number | |
Tree | prec | |
Introduced | 16.0.R1 | |
Platforms | All |
[prec-value] number
Synopsis | Precedence value for which mapping is performed | |
Context | configure qos sap-egress string prec number | |
Tree | prec | |
Range | 0 to 7 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
fc keyword
Synopsis | Forwarding class | |
Context | configure qos sap-egress string prec number fc keyword | |
Tree | fc | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
profile keyword
Synopsis | Default profile for the ingressing traffic | |
Context | configure qos sap-egress string prec number profile keyword | |
Tree | profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
queue [queue-id] number
Synopsis | Enter the queue list instance | |
Context | configure qos sap-egress string queue number | |
Tree | queue | |
Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
Synopsis | Egress Queue-Group queue identifier | |
Context | configure qos sap-egress string queue number | |
Tree | queue | |
Range | 1 to 8 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos sap-egress string queue number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
Synopsis | Constraint used when deriving the operational CIR value | |
Context | configure qos sap-egress string queue number adaptation-rule cir keyword | |
Tree | cir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos sap-egress string queue number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
adv-config-policy reference
Synopsis | Name of the advanced configuration policy | |
Context | configure qos sap-egress string queue number adv-config-policy reference | |
Tree | adv-config-policy | |
Reference | configure qos adv-config-policy string | |
Introduced | 16.0.R1 | |
Platforms | All |
agg-shaper-weight number
Synopsis | Aggregate shaper weight of the sap-egress queue | |
Context | configure qos sap-egress string queue number agg-shaper-weight number | |
Tree | agg-shaper-weight | |
Range | 1 to 100 | |
Default | 1 | |
Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-s |
avg-frame-overhead decimal-number
Synopsis | Average packet-to-frame encapsulation overhead | |
Context | configure qos sap-egress string queue number avg-frame-overhead decimal-number | |
Tree | avg-frame-overhead | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Introduced | 16.0.R1 | |
Platforms |
All |
burst-limit (number | keyword)
Synopsis | Explicit shaping burst size of a queue | |
Context | configure qos sap-egress string queue number burst-limit (number | keyword) | |
Tree | burst-limit | |
Range | 1 to 14000000 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
cbs (number | keyword)
Synopsis | Reserved buffer space for the queue | |
Context | configure qos sap-egress string queue number cbs (number | keyword) | |
Tree | cbs | |
Range | 0 to 1048576 | |
Units | kilobytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
drop-tail
Synopsis | Enter the drop-tail context | |
Context | configure qos sap-egress string queue number drop-tail | |
Tree | drop-tail | |
Introduced | 16.0.R1 | |
Platforms | All |
exceed
percent-reduction-from-mbs (number | keyword)
Synopsis | Percentage reduction from the MBS for a queue drop tail | |
Context | configure qos sap-egress string queue number drop-tail exceed percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
high
percent-reduction-from-mbs (number | keyword)
Synopsis | Percentage reduction from the MBS for a queue drop tail | |
Context | configure qos sap-egress string queue number drop-tail high percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
highplus
percent-reduction-from-mbs (number | keyword)
Synopsis | Percentage reduction from the MBS for a queue drop tail | |
Context | configure qos sap-egress string queue number drop-tail highplus percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
low
percent-reduction-from-mbs (number | keyword)
Synopsis | Low drop-tail percent from MBS that is reduced | |
Context | configure qos sap-egress string queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
fir-burst-limit (number | keyword)
Synopsis | Burst limit for FIR | |
Context | configure qos sap-egress string queue number fir-burst-limit (number | keyword) | |
Tree | fir-burst-limit | |
Description | This command configures a burst limit for the FIR of the specified queue. If the keyword auto is used, the FIR burst limit is based on the PIR. In this case, it is recommended to use the explicit PIR value in the queue configuration. | |
Range | 1 to 102400 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
hs-alt-port-class-pool boolean
Synopsis | Use HS alternate class port pool buffer for traffic | |
Context | configure qos sap-egress string queue number hs-alt-port-class-pool boolean | |
Tree | hs-alt-port-class-pool | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-class-weight number
Synopsis | Scheduling class weight | |
Context | configure qos sap-egress string queue number hs-class-weight number | |
Tree | hs-class-weight | |
Range | 1 | 2 | 4 | 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
hs-wred-queue
Synopsis | Enter the hs-wred-queue context | |
Context | configure qos sap-egress string queue number hs-wred-queue | |
Tree | hs-wred-queue | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
policy reference
Synopsis | Slope policy name | |
Context | configure qos sap-egress string queue number hs-wred-queue policy reference | |
Tree | policy | |
Reference | configure qos slope-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7750 SR-7/12/12e |
hs-wrr-weight number
Synopsis | WRR weight with which queue parents into the scheduler | |
Context | configure qos sap-egress string queue number hs-wrr-weight number | |
Tree | hs-wrr-weight | |
Range | 1 to 127 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7750 SR-7/12/12e |
maximum-data-transmission (number | keyword)
Synopsis | Maximum data transmitted at each scheduling opportunity | |
Context | configure qos sap-egress string queue number maximum-data-transmission (number | keyword) | |
Tree | maximum-data-transmission | |
Description | This command sets the maximum amount of data transmitted at a single scheduling opportunity. If the frame to be scheduled is longer than the configured amount of data, the entire frame is still transmitted. This command is applicable only to FP4 and FP5 chipsets. | |
Range | 512 to 32768 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 23.3.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
mbs (number | keyword)
Synopsis | Buffer space allowed for the queue | |
Context | configure qos sap-egress string queue number mbs (number | keyword) | |
Tree | mbs | |
Range | 0 to 1073741824 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
packet-byte-offset number
Synopsis | Packet byte offset for addition of policing information | |
Context | configure qos sap-egress string queue number packet-byte-offset number | |
Tree | packet-byte-offset | |
Range | -64 to 32 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos sap-egress string queue number percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
Synopsis | Administrative CIR percent | |
Context | configure qos sap-egress string queue number percent-rate cir decimal-number | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Introduced | 16.0.R1 | |
Platforms |
All |
pir decimal-number
Synopsis | Administrative PIR percent | |
Context | configure qos sap-egress string queue number percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 16.0.R1 | |
Platforms | All |
reference-rate keyword
Synopsis | Reference rate | |
Context | configure qos sap-egress string queue number percent-rate reference-rate keyword | |
Tree | reference-rate | |
Options | ||
Default | port-limit | |
Introduced | 16.0.R1 | |
Platforms | All |
port-parent
Synopsis | Enable the port-parent context | |
Context | configure qos sap-egress string queue number port-parent | |
Tree | port-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
Synopsis | Port priority to receive bandwidth for within-CIR pass | |
Context | configure qos sap-egress string queue number port-parent cir-level number | |
Tree | cir-level | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
Synopsis | Weight used at the within-CIR port priority level | |
Context | configure qos sap-egress string queue number port-parent cir-weight number | |
Tree | cir-weight | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
level number
Synopsis | Port priority for bandwidth for above-CIR offered load | |
Context | configure qos sap-egress string queue number port-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
weight number
Synopsis | Weight used at above-CIR port priority level | |
Context | configure qos sap-egress string queue number port-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
queue-type keyword
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Method used to service queue from hardware perspective | |
Context | configure qos sap-egress string queue number queue-type keyword | |
Tree | queue-type | |
Options | ||
Default | auto-expedited | |
Introduced | 16.0.R1 | |
Platforms | All |
rate
Synopsis | Enter the rate context | |
Context | configure qos sap-egress string queue number rate | |
Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
pir (number | keyword)
sched-class (number | keyword)
Synopsis | Scheduler class for the sap-egress queue | |
Context | configure qos sap-egress string queue number sched-class (number | keyword) | |
Tree | sched-class | |
Description | This command configures a scheduling class for the specified queue. If the keyword auto is used, the scheduling class mapping is done automatically. | |
Range | 1 to 6 | |
Options | ||
Default | auto | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
scheduler-parent
Synopsis | Enable the scheduler-parent context | |
Context | configure qos sap-egress string queue number scheduler-parent | |
Tree | scheduler-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos sap-egress string queue number scheduler-parent cir-level number | |
Tree | cir-level | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
Synopsis | Weight used at the within-CIR port priority level | |
Context | configure qos sap-egress string queue number scheduler-parent cir-weight number | |
Tree | cir-weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos sap-egress string queue number scheduler-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
scheduler-name string
Synopsis | Parent scheduler name | |
Context | configure qos sap-egress string queue number scheduler-parent scheduler-name string | |
Tree | scheduler-name | |
Description | This command associates a scheduler name to a queue. The scheduler name must have previously been defined within an existing scheduler policy and exist on each SAP the queue is created on. There are no checks performed to ensure that the scheduler name exists within an existing scheduler policy. Until the scheduler name exists on the egress SAP, the queue operates in an orphaned state. | |
String Length | 1 to 32 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
weight number
Synopsis | Weight used by the scheduler for feeding the queue | |
Context | configure qos sap-egress string queue number scheduler-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
wred-queue
Synopsis | Enter the wred-queue context | |
Context | configure qos sap-egress string queue number wred-queue | |
Tree | wred-queue | |
Introduced | 16.0.R1 | |
Platforms | All |
mode keyword
Synopsis | Pool association to allow queue-specific WRED slopes | |
Context | configure qos sap-egress string queue number wred-queue mode keyword | |
Tree | mode | |
Options | ||
Introduced | 16.0.R1 | |
Platforms | All |
policy reference
Synopsis | Slope policy name | |
Context | configure qos sap-egress string queue number wred-queue policy reference | |
Tree | policy | |
Reference | configure qos slope-policy string | |
Introduced | 16.0.R1 | |
Platforms | All |
usage keyword
Synopsis | Congestion control type | |
Context | configure qos sap-egress string queue number wred-queue usage keyword | |
Tree | usage | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
sched-class-elevation
Synopsis | Enter the sched-class-elevation context | |
Context | configure qos sap-egress string sched-class-elevation | |
Tree | sched-class-elevation | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
sched-class [class-id] number
Synopsis | Enter the sched-class list instance | |
Context | configure qos sap-egress string sched-class-elevation sched-class number | |
Tree | sched-class | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
[class-id] number
Synopsis | Scheduling class associated with this SAP egress | |
Context | configure qos sap-egress string sched-class-elevation sched-class number | |
Tree | sched-class | |
Range | 1 to 6 | |
Notes | This element is part of a list key. | |
Introduced | 21.7.R1 | |
Platforms | 7750 SR-1, 7750 SR-s |
weight number
Synopsis | Weight of the schedule class | |
Context | configure qos sap-egress string sched-class-elevation sched-class number weight number | |
Tree | weight | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 21.7.R1 | |
Platforms |
7750 SR-1, 7750 SR-s |
scope keyword
Synopsis | Scope of the policy | |
Context | configure qos sap-egress string scope keyword | |
Tree | scope | |
Options | ||
Default | template | |
Introduced | 16.0.R1 | |
Platforms | All |
subscriber-mgmt
Synopsis | Enter the subscriber-mgmt context | |
Context | configure qos sap-egress string subscriber-mgmt | |
Tree | subscriber-mgmt | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dynamic-policer
Synopsis | Enter the dynamic-policer context | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer | |
Tree | dynamic-policer | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arbiter-parent
Synopsis | Enter the arbiter-parent context | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer arbiter-parent | |
Tree | arbiter-parent | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arbiter-name string
Synopsis | Arbiter name | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer arbiter-parent arbiter-name string | |
Tree | arbiter-name | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer arbiter-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
weight number
Synopsis | Weight to be used by the arbiter for feeding this policer | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer arbiter-parent weight number | |
Tree | weight | |
Range | 1 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cbs (number | keyword)
Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer cbs (number | keyword) | |
Tree | cbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mbs (number | keyword)
Synopsis | High priority 'violate' threshold of PIR leaky bucket of this policer | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer mbs (number | keyword) | |
Tree | mbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
packet-byte-offset number
Synopsis | Packet size modification for policing information | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer packet-byte-offset number | |
Tree | packet-byte-offset | |
Range | -64 to 31 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policer-id-range
Synopsis | Enable the policer-id-range context | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer policer-id-range | |
Tree | policer-id-range | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end number
Synopsis | Upper bound of the dynamic policer ID range | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer policer-id-range end number | |
Tree | end | |
Range | 1 to 63 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start number
Synopsis | Lower bound of the dynamic policer ID range | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer policer-id-range start number | |
Tree | start | |
Range | 1 to 63 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
stat-mode keyword
Synopsis | Mode of statistics collected by the policer | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-policer stat-mode keyword | |
Tree | stat-mode | |
Options | ||
Default | minimal | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dynamic-queue
Synopsis | Enter the dynamic-queue context | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue | |
Tree | dynamic-queue | |
Description | Commands in this context configure dynamically-created queues for subscriber-management applications such as 5G FWA sessions. The configuration options in this context are the same as for static queues configured in the configure qos sap-egress queue context, but are automatically applied to dynamically-created queues. See the 7750 SR and VSR BNG CUPS User Plane Function Guide, "PCC rules based QoS" for more information about Dynamic QoS based on PCC rules for FWA sessions. See the 7450 ESS, 7750 SR, 7950 XRS, and VSR Quality of Service Guide for general information about configuring QoS. | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cbs (number | keyword)
Synopsis | Committed buffer space reserved for the queue | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue cbs (number | keyword) | |
Tree | cbs | |
Description | This command configures the committed buffer space (CBS) that is reserved for the queue. The CBS is applied to each dynamic queue and is not shared. | |
Range | 0 to 1048576 | |
Units | kilobytes | |
Options | ||
Default | auto | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mbs (number | keyword)
Synopsis | Maximum buffer space allowed for the queue | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue mbs (number | keyword) | |
Tree | mbs | |
Description | This command configures the maximum buffer space (MBS) allowed for the queue. The MBS is applied to each dynamic queue and is not shared. | |
Range | 0 to 1073741824 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
packet-byte-offset number
Synopsis | Packet byte offset used to modify the input packet size | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue packet-byte-offset number | |
Tree | packet-byte-offset | |
Description | This command configures the packet-byte offset the system uses to modify the size of the input packets. This also applies to any charging statistics. | |
Range | -64 to 31 | |
Default | 0 | |
Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
port-parent
Synopsis | Enable the port-parent context | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue port-parent | |
Tree | port-parent | |
Description | Commands in this context configure the queue treatment by the port parent, that governs the available bandwidth for the queue. They define how this queue contends with the other children for the parent bandwidth. See the 7750 SR and VSR BNG CUPS User Plane Function Guide, "PCC rules based QoS" for more information about Dynamic QoS based on PCC rules for FWA sessions. See the 7450 ESS, 7750 SR, 7950 XRS, and VSR Quality of Service Guide for general information about configuring QoS. | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cir-level number
Synopsis | Port priority for within-CIR passes | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue port-parent cir-level number | |
Tree | cir-level | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cir-weight number
Synopsis | Weight used for the within-CIR port-priority level | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue port-parent cir-weight number | |
Tree | cir-weight | |
Description | This command configures the weight the queue uses to receive bandwidth at the within-CIR port priority level. This also applies to any charging statistics. | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
level number
Synopsis | Port priority level for above-CIR offered load | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue port-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
weight number
Synopsis | Weight used for the above-CIR port-priority level | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue port-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
queue-id-range
Synopsis | Enable the queue-id-range context | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue queue-id-range | |
Tree | queue-id-range | |
Description | Commands in this context configure the range of IDs from which dynamic queues are allocated. You cannot use these IDs for static queues within the same policy. See the 7750 SR and VSR BNG CUPS User Plane Function Guide, "PCC rules based QoS" for more information about Dynamic QoS based on PCC rules for FWA sessions. See the 7450 ESS, 7750 SR, 7950 XRS, and VSR Quality of Service Guide for general information about configuring QoS. | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end number
Synopsis | Upper bound of the dynamic queue range | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue queue-id-range end number | |
Tree | end | |
Range | 1 to 8 | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start number
Synopsis | Lower bound of dynamic queue range | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue queue-id-range start number | |
Tree | start | |
Range | 1 to 8 | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
scheduler-parent
Synopsis | Enable the scheduler-parent context | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue scheduler-parent | |
Tree | scheduler-parent | |
Description | Commands in this context configure the queue treatment by the parent scheduler that governs the available bandwidth for the queue. They define how this queue contends with the other children for the parent bandwidth. See the 7750 SR and VSR BNG CUPS User Plane Function Guide, "PCC rules based QoS" for more information about Dynamic QoS based on PCC rules for FWA sessions. See the 7450 ESS, 7750 SR, 7950 XRS, and VSR Quality of Service Guide for general information about configuring QoS. | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cir-level number
Synopsis | Priority for feeding the parent for within-CIR passes | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue scheduler-parent cir-level number | |
Tree | cir-level | |
Description | This command configures the priority level the system uses to feed to the parent for within-CIR passes. | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cir-weight number
Synopsis | Weight used for the within-CIR port-priority level | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue scheduler-parent cir-weight number | |
Tree | cir-weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
level number
Synopsis | Priority level for the above-CIR offered load | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue scheduler-parent level number | |
Tree | level | |
Description | This command configures the priority level of the queue (as compared to other competing schedulers and queues) for the above-CIR offered load bandwidth, when feeding the parent scheduler. | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
scheduler-name string
Synopsis | Name of the parent scheduler | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue scheduler-parent scheduler-name string | |
Tree | scheduler-name | |
String Length | 1 to 32 | |
Notes | This element is mandatory. | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
weight number
Synopsis | Weight used for the above-CIR port priority level | |
Context | configure qos sap-egress string subscriber-mgmt dynamic-queue scheduler-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 23.7.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pcc-rule-entry
Synopsis | Enter the pcc-rule-entry context | |
Context | configure qos sap-egress string subscriber-mgmt pcc-rule-entry | |
Tree | pcc-rule-entry | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
range
Synopsis | Enable the range context | |
Context | configure qos sap-egress string subscriber-mgmt pcc-rule-entry range | |
Tree | range | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end number
Synopsis | Upper bound of the filter and QoS policy entries range | |
Context | configure qos sap-egress string subscriber-mgmt pcc-rule-entry range end number | |
Tree | end | |
Range | 1 to 65535 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start number
Synopsis | Lower bound of the filter and QoS policy entries range | |
Context | configure qos sap-egress string subscriber-mgmt pcc-rule-entry range start number | |
Tree | start | |
Range | 1 to 65535 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
use-policer-result-marking-dot1p-inner boolean
Synopsis | Enable using egress policer for Dot1p inner marking | |
Context | configure qos sap-egress string use-policer-result-marking-dot1p-inner boolean | |
Tree | use-policer-result-marking-dot1p-inner | |
Description | When configured, this command enables using the egress policer profile result to mark dot1p-inner bits. | |
Default | false | |
Introduced | 23.7.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS |
sap-ingress [sap-ingress-policy-name] string
Synopsis | Enter the sap-ingress list instance | |
Context | configure qos sap-ingress string | |
Tree | sap-ingress | |
Introduced | 16.0.R1 | |
Platforms | All |
[sap-ingress-policy-name] string
Synopsis | Policy name | |
Context | configure qos sap-ingress string | |
Tree | sap-ingress | |
String Length | 1 to 64 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
default-fc string
Synopsis | Default forwarding class for non-matching traffic | |
Context | configure qos sap-ingress string default-fc string | |
Tree | default-fc | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
default-priority keyword
Synopsis | Priority for packets received on an ingress SAP | |
Context | configure qos sap-ingress string default-priority keyword | |
Tree | default-priority | |
Options | ||
Default | low | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos sap-ingress string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
dot1p [dot1p-value] number
Synopsis | Enter the dot1p list instance | |
Context | configure qos sap-ingress string dot1p number | |
Tree | dot1p | |
Introduced | 16.0.R1 | |
Platforms | All |
[dot1p-value] number
Synopsis | Dot1p value to match in the packet | |
Context | configure qos sap-ingress string dot1p number | |
Tree | dot1p | |
Range | 0 to 7 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
fc string
Synopsis | Forwarding class for traffic matching specified dot1p | |
Context | configure qos sap-ingress string dot1p number fc string | |
Tree | fc | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
priority keyword
Synopsis | Priority for packets that match the Dot1p value | |
Context | configure qos sap-ingress string dot1p number priority keyword | |
Tree | priority | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
dscp [dscp-name] keyword
Synopsis | Enter the dscp list instance | |
Context | configure qos sap-ingress string dscp keyword | |
Tree | dscp | |
Introduced | 16.0.R1 | |
Platforms | All |
[dscp-name] keyword
Synopsis | Name for the Differentiated Services Code Point (DSCP) | |
Context | configure qos sap-ingress string dscp keyword | |
Tree | dscp | |
Options | ||
Notes |
This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
fc string
Synopsis | Forwarding class for traffic matching specified DSCP | |
Context | configure qos sap-ingress string dscp keyword fc string | |
Tree | fc | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
priority keyword
Synopsis | Priority for the packet | |
Context | configure qos sap-ingress string dscp keyword priority keyword | |
Tree | priority | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
fc [fc-name] string
Synopsis | Enter the fc list instance | |
Context | configure qos sap-ingress string fc string | |
Tree | fc | |
Introduced | 16.0.R1 | |
Platforms | All |
[fc-name] string
Synopsis | Forwarding class (and optional subclass) name | |
Context | configure qos sap-ingress string fc string | |
Tree | fc | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
broadcast-policer number
Synopsis | Policer ID for multicast traffic in forwarding class | |
Context | configure qos sap-ingress string fc string broadcast-policer number | |
Tree | broadcast-policer | |
Range | 1 to 63 | |
Notes | The following elements are part of a choice: (broadcast-policer and fp-redirect-group-broadcast-policer), broadcast-queue, or broadcast-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
broadcast-queue reference
Synopsis | Broadcast queue for packets in the forwarding class | |
Context | configure qos sap-ingress string fc string broadcast-queue reference | |
Tree | broadcast-queue | |
Reference | configure qos sap-ingress string queue number | |
Notes | The following elements are part of a choice: (broadcast-policer and fp-redirect-group-broadcast-policer), broadcast-queue, or broadcast-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
broadcast-queue-group-queue
Synopsis | Enable the broadcast-queue-group-queue context | |
Context | configure qos sap-ingress string fc string broadcast-queue-group-queue | |
Tree | broadcast-queue-group-queue | |
Notes | The following elements are part of a choice: (broadcast-policer and fp-redirect-group-broadcast-policer), broadcast-queue, or broadcast-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue reference
Synopsis | Broadcast queue for packets in the forwarding class | |
Context | configure qos sap-ingress string fc string broadcast-queue-group-queue queue reference | |
Tree | queue | |
Reference | configure qos queue-group-templates ingress queue-group string queue number | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-group-name reference
Synopsis | Queue group name to forward traffic | |
Context | configure qos sap-ingress string fc string broadcast-queue-group-queue queue-group-name reference | |
Tree | queue-group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
de-1-out-profile boolean
Synopsis | Frames with DE value to be assigned as out of profile | |
Context | configure qos sap-ingress string fc string de-1-out-profile boolean | |
Tree | de-1-out-profile | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
egress-fc keyword
Synopsis | Forwarding class for egress QoS processing | |
Context | configure qos sap-ingress string fc string egress-fc keyword | |
Tree | egress-fc | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
fp-redirect-group-broadcast-policer
Synopsis | Use policer as defined in FP queue-group for the SAP | |
Context | configure qos sap-ingress string fc string fp-redirect-group-broadcast-policer | |
Tree | fp-redirect-group-broadcast-policer | |
Notes | The following elements are part of a choice: (broadcast-policer and fp-redirect-group-broadcast-policer), broadcast-queue, or broadcast-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
fp-redirect-group-multicast-policer
Synopsis | Use policer as defined in FP queue-group for the SAP | |
Context | configure qos sap-ingress string fc string fp-redirect-group-multicast-policer | |
Tree | fp-redirect-group-multicast-policer | |
Notes | The following elements are part of a choice: (fp-redirect-group-multicast-policer and multicast-policer), multicast-queue, or multicast-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
fp-redirect-group-policer
Synopsis | Use policer as defined in FP queue-group for the SAP | |
Context | configure qos sap-ingress string fc string fp-redirect-group-policer | |
Tree | fp-redirect-group-policer | |
Notes | The following elements are part of a choice: (fp-redirect-group-policer and policer), queue, or queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
fp-redirect-group-unknown-policer
Synopsis | Use policer as defined in FP queue-group for the SAP | |
Context | configure qos sap-ingress string fc string fp-redirect-group-unknown-policer | |
Tree | fp-redirect-group-unknown-policer | |
Notes | The following elements are part of a choice: (fp-redirect-group-unknown-policer and unknown-policer), unknown-queue, or unknown-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
in-remark
Synopsis | Enter the in-remark context | |
Context | configure qos sap-ingress string fc string in-remark | |
Tree | in-remark | |
Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
prec number
multicast-policer number
Synopsis | Policer ID for multicast traffic in forwarding class | |
Context | configure qos sap-ingress string fc string multicast-policer number | |
Tree | multicast-policer | |
Range | 1 to 63 | |
Notes | The following elements are part of a choice: (fp-redirect-group-multicast-policer and multicast-policer), multicast-queue, or multicast-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
multicast-queue reference
Synopsis | Broadcast queue to assign for packets in this forwarding class | |
Context | configure qos sap-ingress string fc string multicast-queue reference | |
Tree | multicast-queue | |
Reference | configure qos sap-ingress string queue number | |
Notes | The following elements are part of a choice: (fp-redirect-group-multicast-policer and multicast-policer), multicast-queue, or multicast-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
multicast-queue-group-queue
Synopsis | Enable the multicast-queue-group-queue context | |
Context | configure qos sap-ingress string fc string multicast-queue-group-queue | |
Tree | multicast-queue-group-queue | |
Notes | The following elements are part of a choice: (fp-redirect-group-multicast-policer and multicast-policer), multicast-queue, or multicast-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue reference
Synopsis | Broadcast queue for packets in the forwarding class | |
Context | configure qos sap-ingress string fc string multicast-queue-group-queue queue reference | |
Tree | queue | |
Reference | configure qos queue-group-templates ingress queue-group string queue number | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-group-name reference
Synopsis | Queue group name to forward traffic | |
Context | configure qos sap-ingress string fc string multicast-queue-group-queue queue-group-name reference | |
Tree | queue-group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
out-remark
Synopsis | Enter the out-remark context | |
Context | configure qos sap-ingress string fc string out-remark | |
Tree | out-remark | |
Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
Synopsis | DSCP to override DSCP bits of the matching packet | |
Context | configure qos sap-ingress string fc string out-remark dscp keyword | |
Tree | dscp | |
Options | ||
Notes |
The following elements are part of a choice: dscp or prec. | |
Introduced | 16.0.R1 | |
Platforms | All |
prec number
Synopsis | Value to override precedence bits of matching packet | |
Context | configure qos sap-ingress string fc string out-remark prec number | |
Tree | prec | |
Range | 0 to 7 | |
Notes | The following elements are part of a choice: dscp or prec. | |
Introduced | 16.0.R1 | |
Platforms | All |
policer number
Synopsis | Policer ID for unicast traffic in the forwarding class | |
Context | configure qos sap-ingress string fc string policer number | |
Tree | policer | |
Range | 1 to 63 | |
Notes | The following elements are part of a choice: (fp-redirect-group-policer and policer), queue, or queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile keyword
Synopsis | Packets profile associated with the forwarding class | |
Context | configure qos sap-ingress string fc string profile keyword | |
Tree | profile | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
queue reference
Synopsis | Queue to assign for packets in this forwarding class | |
Context | configure qos sap-ingress string fc string queue reference | |
Tree | queue | |
Reference | configure qos sap-ingress string queue number | |
Notes | The following elements are part of a choice: (fp-redirect-group-policer and policer), queue, or queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-group-queue
Synopsis | Enable the queue-group-queue context | |
Context | configure qos sap-ingress string fc string queue-group-queue | |
Tree | queue-group-queue | |
Notes | The following elements are part of a choice: (fp-redirect-group-policer and policer), queue, or queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue reference
Synopsis | Queue to assign for packets in this forwarding class | |
Context | configure qos sap-ingress string fc string queue-group-queue queue reference | |
Tree | queue | |
Reference | configure qos queue-group-templates ingress queue-group string queue number | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-group-name reference
Synopsis | Queue group to forward traffic | |
Context | configure qos sap-ingress string fc string queue-group-queue queue-group-name reference | |
Tree | queue-group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
unknown-policer number
Synopsis | Policer ID for multicast traffic in forwarding class | |
Context | configure qos sap-ingress string fc string unknown-policer number | |
Tree | unknown-policer | |
Range | 1 to 63 | |
Notes | The following elements are part of a choice: (fp-redirect-group-unknown-policer and unknown-policer), unknown-queue, or unknown-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
unknown-queue reference
Synopsis | Broadcast queue to assign for packets in this forwarding class | |
Context | configure qos sap-ingress string fc string unknown-queue reference | |
Tree | unknown-queue | |
Reference | configure qos sap-ingress string queue number | |
Notes | The following elements are part of a choice: (fp-redirect-group-unknown-policer and unknown-policer), unknown-queue, or unknown-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
unknown-queue-group-queue
Synopsis | Enable the unknown-queue-group-queue context | |
Context | configure qos sap-ingress string fc string unknown-queue-group-queue | |
Tree | unknown-queue-group-queue | |
Notes | The following elements are part of a choice: (fp-redirect-group-unknown-policer and unknown-policer), unknown-queue, or unknown-queue-group-queue. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue reference
Synopsis | Broadcast queue for packets in the forwarding class | |
Context | configure qos sap-ingress string fc string unknown-queue-group-queue queue reference | |
Tree | queue | |
Reference | configure qos queue-group-templates ingress queue-group string queue number | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-group-name reference
Synopsis | Queue group name to forward traffic | |
Context | configure qos sap-ingress string fc string unknown-queue-group-queue queue-group-name reference | |
Tree | queue-group-name | |
Reference | configure qos queue-group-templates ingress queue-group string | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
ip-criteria
Synopsis | Enter the ip-criteria context | |
Context | configure qos sap-ingress string ip-criteria | |
Tree | ip-criteria | |
Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
Synopsis | Enter the entry list instance | |
Context | configure qos sap-ingress string ip-criteria entry number | |
Tree | entry | |
Introduced | 16.0.R1 | |
Platforms | All |
[entry-id] number
Synopsis | IP criteria entry to create or edit for the policy | |
Context | configure qos sap-ingress string ip-criteria entry number | |
Tree | entry | |
Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
action
Synopsis | Enter the action context | |
Context | configure qos sap-ingress string ip-criteria entry number action | |
Tree | action | |
Introduced | 16.0.R1 | |
Platforms | All |
fc string
Synopsis | Forwarding class for traffic matching the criteria | |
Context | configure qos sap-ingress string ip-criteria entry number action fc string | |
Tree | fc | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
policer reference
Synopsis | Policer ID for traffic matching the criteria | |
Context | configure qos sap-ingress string ip-criteria entry number action policer reference | |
Tree | policer | |
Reference | configure qos sap-ingress string policer number | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority keyword
Synopsis | Priority for the packet | |
Context | configure qos sap-ingress string ip-criteria entry number action priority keyword | |
Tree | priority | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
type keyword
Synopsis | Action for criteria entry | |
Context | configure qos sap-ingress string ip-criteria entry number action type keyword | |
Tree | type | |
Options | ||
Default | ignore-match | |
Introduced | 16.0.R1 | |
Platforms |
All |
description string
Synopsis | Text description | |
Context | configure qos sap-ingress string ip-criteria entry number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
match
Synopsis | Enter the match context | |
Context | configure qos sap-ingress string ip-criteria entry number match | |
Tree | match | |
Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
Synopsis | DSCP value to match in the packet | |
Context | configure qos sap-ingress string ip-criteria entry number match dscp keyword | |
Tree | dscp | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
dst-ip
Synopsis | Enter the dst-ip context | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-ip | |
Tree | dst-ip | |
Introduced | 16.0.R1 | |
Platforms | All |
address (ipv4-prefix-with-host-bits | ipv4-address)
Synopsis | Destination IPv4 address for SAP QoS policy match | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
Synopsis | IP-prefix list as match criterion | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-ip ip-prefix-list reference | |
Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
mask string
Synopsis | IP address to match with source IP of the packet | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-ip mask string | |
Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
dst-port
Synopsis | Enter the dst-port context | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-port | |
Tree | dst-port | |
Introduced | 16.0.R1 | |
Platforms | All |
eq number
Synopsis | Value 'equal to' assigned as match condition | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-port eq number | |
Tree | eq | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
gt number
Synopsis | Value 'greater than' assigned as match condition | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-port gt number | |
Tree | gt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
lt number
Synopsis | Value 'less than' assigned as match condition | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-port lt number | |
Tree | lt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
range
Synopsis | Enter the range context | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-port range | |
Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
Synopsis | Upper bound of the port range | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-port range end number | |
Tree | end | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
Synopsis | Lower bound of the port range | |
Context | configure qos sap-ingress string ip-criteria entry number match dst-port range start number | |
Tree | start | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
fragment keyword
Synopsis | Fragmented packets as the match criterion | |
Context | configure qos sap-ingress string ip-criteria entry number match fragment keyword | |
Tree | fragment | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
protocol (number | keyword)
Synopsis | IP protocol to match | |
Context | configure qos sap-ingress string ip-criteria entry number match protocol (number | keyword) | |
Tree | protocol | |
Range | 0 to 255 | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
Synopsis | Enter the src-ip context | |
Context | configure qos sap-ingress string ip-criteria entry number match src-ip | |
Tree | src-ip | |
Introduced | 16.0.R1 | |
Platforms | All |
address (ipv4-prefix-with-host-bits | ipv4-address)
Synopsis | Source IPv4 address for SAP QoS policy match criterion | |
Context | configure qos sap-ingress string ip-criteria entry number match src-ip address (ipv4-prefix-with-host-bits | ipv4-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ip-prefix-list reference
Synopsis | IP-prefix list as match criterion | |
Context | configure qos sap-ingress string ip-criteria entry number match src-ip ip-prefix-list reference | |
Tree | ip-prefix-list | |
Reference | configure qos match-list ip-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
mask string
Synopsis | IP address to match with source IP of the packet | |
Context | configure qos sap-ingress string ip-criteria entry number match src-ip mask string | |
Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ip-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
src-port
Synopsis | Enter the src-port context | |
Context | configure qos sap-ingress string ip-criteria entry number match src-port | |
Tree | src-port | |
Introduced | 16.0.R1 | |
Platforms | All |
eq number
Synopsis | Value 'equal to' assigned as match condition | |
Context | configure qos sap-ingress string ip-criteria entry number match src-port eq number | |
Tree | eq | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
gt number
Synopsis | Value 'greater than' assigned as match condition | |
Context | configure qos sap-ingress string ip-criteria entry number match src-port gt number | |
Tree | gt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
lt number
Synopsis | Value 'less than' assigned as match condition | |
Context | configure qos sap-ingress string ip-criteria entry number match src-port lt number | |
Tree | lt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
range
Synopsis | Enter the range context | |
Context | configure qos sap-ingress string ip-criteria entry number match src-port range | |
Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
Synopsis | Upper bound of the port range | |
Context | configure qos sap-ingress string ip-criteria entry number match src-port range end number | |
Tree | end | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
Synopsis | Lower bound of the port range | |
Context | configure qos sap-ingress string ip-criteria entry number match src-port range start number | |
Tree | start | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
vxlan-vni
Synopsis | Enter the vxlan-vni context | |
Context | configure qos sap-ingress string ip-criteria entry number match vxlan-vni | |
Tree | vxlan-vni | |
Introduced | 16.0.R1 | |
Platforms | All |
eq number
Synopsis | Value 'equal to' assigned as match condition | |
Context | configure qos sap-ingress string ip-criteria entry number match vxlan-vni eq number | |
Tree | eq | |
Range | 1 to 16777215 | |
Notes | The following elements are part of a choice: eq or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
range
Synopsis | Enter the range context | |
Context | configure qos sap-ingress string ip-criteria entry number match vxlan-vni range | |
Tree | range | |
Notes | The following elements are part of a choice: eq or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
Synopsis | Upper bound of the VNI range | |
Context | configure qos sap-ingress string ip-criteria entry number match vxlan-vni range end number | |
Tree | end | |
Range | 1 to 16777215 | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
Synopsis | Lower bound of the VNI range | |
Context | configure qos sap-ingress string ip-criteria entry number match vxlan-vni range start number | |
Tree | start | |
Range | 1 to 16777215 | |
Introduced | 16.0.R1 | |
Platforms | All |
tag number
Synopsis | Tag ID associated with the criteria entry | |
Context | configure qos sap-ingress string ip-criteria entry number tag number | |
Tree | tag | |
Description | This command associates a tag with the criteria entry. Tag identifiers are not supported in SAP ingress QoS policies, MAC criteria statements, or in SAP egress QoS policies. | |
Range | 0 to 255 | |
Default | 0 | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
type keyword
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | IPv4 criteria entry type | |
Context | configure qos sap-ingress string ip-criteria type keyword | |
Tree | type | |
Description | This command specifies the type of entries that can be configured for IPv4 match criteria. | |
Options | ||
Default | normal | |
Introduced | 16.0.R1 | |
Platforms | All |
ipv6-criteria
Synopsis | Enter the ipv6-criteria context | |
Context | configure qos sap-ingress string ipv6-criteria | |
Tree | ipv6-criteria | |
Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
Synopsis | Enter the entry list instance | |
Context | configure qos sap-ingress string ipv6-criteria entry number | |
Tree | entry | |
Introduced | 16.0.R1 | |
Platforms | All |
[entry-id] number
Synopsis | IPv6 criteria entry to create or edit for the policy | |
Context | configure qos sap-ingress string ipv6-criteria entry number | |
Tree | entry | |
Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
action
Synopsis | Enter the action context | |
Context | configure qos sap-ingress string ipv6-criteria entry number action | |
Tree | action | |
Introduced | 16.0.R1 | |
Platforms | All |
fc string
Synopsis | Forwarding class for traffic matching the criteria | |
Context | configure qos sap-ingress string ipv6-criteria entry number action fc string | |
Tree | fc | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
policer reference
Synopsis | Policer ID for traffic matching the criteria | |
Context | configure qos sap-ingress string ipv6-criteria entry number action policer reference | |
Tree | policer | |
Reference | configure qos sap-ingress string policer number | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority keyword
Synopsis | Priority for the packet | |
Context | configure qos sap-ingress string ipv6-criteria entry number action priority keyword | |
Tree | priority | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
type keyword
Synopsis | Action for criteria entry | |
Context | configure qos sap-ingress string ipv6-criteria entry number action type keyword | |
Tree | type | |
Options | ||
Default | ignore-match | |
Introduced | 16.0.R1 | |
Platforms |
All |
description string
Synopsis | Text description | |
Context | configure qos sap-ingress string ipv6-criteria entry number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
match
Synopsis | Enter the match context | |
Context | configure qos sap-ingress string ipv6-criteria entry number match | |
Tree | match | |
Introduced | 16.0.R1 | |
Platforms | All |
dscp keyword
Synopsis | DSCP value to match in the packet | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dscp keyword | |
Tree | dscp | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
dst-ip
Synopsis | Enter the dst-ip context | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-ip | |
Tree | dst-ip | |
Introduced | 16.0.R1 | |
Platforms | All |
address (ipv6-prefix-with-host-bits | ipv6-address)
Synopsis | IPv6 address to match destination IP of the packet | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
Synopsis | IPv6 prefix list as match criterion for IPv6 addresses | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-ip ipv6-prefix-list reference | |
Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask string
Synopsis | IP address to match with source IP of the packet | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-ip mask string | |
Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
dst-port
Synopsis | Enter the dst-port context | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-port | |
Tree | dst-port | |
Introduced | 16.0.R1 | |
Platforms | All |
eq number
Synopsis | Value 'equal to' assigned as match condition | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-port eq number | |
Tree | eq | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
gt number
Synopsis | Value 'greater than' assigned as match condition | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-port gt number | |
Tree | gt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
lt number
Synopsis | Value 'less than' assigned as match condition | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-port lt number | |
Tree | lt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
range
Synopsis | Enter the range context | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-port range | |
Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
Synopsis | Upper bound of the port range | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-port range end number | |
Tree | end | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
Synopsis | Lower bound of the port range | |
Context | configure qos sap-ingress string ipv6-criteria entry number match dst-port range start number | |
Tree | start | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
fragment keyword
Synopsis | Fragmented packets as the match criterion | |
Context | configure qos sap-ingress string ipv6-criteria entry number match fragment keyword | |
Tree | fragment | |
Options | ||
Introduced | 16.0.R1 | |
Platforms | All |
next-header (number | keyword)
Synopsis | IP protocol to match | |
Context | configure qos sap-ingress string ipv6-criteria entry number match next-header (number | keyword) | |
Tree | next-header | |
Range | 0 to 255 | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
src-ip
Synopsis | Enter the src-ip context | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-ip | |
Tree | src-ip | |
Introduced | 16.0.R1 | |
Platforms | All |
address (ipv6-prefix-with-host-bits | ipv6-address)
Synopsis | IPv4 address to match | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-ip address (ipv6-prefix-with-host-bits | ipv6-address) | |
Tree | address | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
ipv6-prefix-list reference
Synopsis | IPv6 prefix list as match criterion for IPv6 addresses | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-ip ipv6-prefix-list reference | |
Tree | ipv6-prefix-list | |
Reference | configure qos match-list ipv6-prefix-list string | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 20.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
mask string
Synopsis | IP address to match with source IP of the packet | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-ip mask string | |
Tree | mask | |
Notes | The following elements are part of a choice: (address and mask) or ipv6-prefix-list. | |
Introduced | 16.0.R1 | |
Platforms | All |
src-port
Synopsis | Enter the src-port context | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-port | |
Tree | src-port | |
Introduced | 16.0.R1 | |
Platforms | All |
eq number
Synopsis | Value 'equal to' assigned as match condition | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-port eq number | |
Tree | eq | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
gt number
Synopsis | Value 'greater than' assigned as match condition | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-port gt number | |
Tree | gt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
lt number
Synopsis | Value 'less than' assigned as match condition | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-port lt number | |
Tree | lt | |
Range | 0 to 65535 | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
range
Synopsis | Enter the range context | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-port range | |
Tree | range | |
Notes | The following elements are part of a choice: eq, gt, lt, or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
Synopsis | Upper bound of the port range | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-port range end number | |
Tree | end | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
Synopsis | Lower bound of the port range | |
Context | configure qos sap-ingress string ipv6-criteria entry number match src-port range start number | |
Tree | start | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
vxlan-vni
Synopsis | Enter the vxlan-vni context | |
Context | configure qos sap-ingress string ipv6-criteria entry number match vxlan-vni | |
Tree | vxlan-vni | |
Introduced | 16.0.R1 | |
Platforms | All |
eq number
Synopsis | Value 'equal to' assigned as match condition | |
Context | configure qos sap-ingress string ipv6-criteria entry number match vxlan-vni eq number | |
Tree | eq | |
Range | 1 to 16777215 | |
Notes | The following elements are part of a choice: eq or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
range
Synopsis | Enter the range context | |
Context | configure qos sap-ingress string ipv6-criteria entry number match vxlan-vni range | |
Tree | range | |
Notes | The following elements are part of a choice: eq or range. | |
Introduced | 16.0.R1 | |
Platforms | All |
end number
Synopsis | Upper bound of the VNI range | |
Context | configure qos sap-ingress string ipv6-criteria entry number match vxlan-vni range end number | |
Tree | end | |
Range | 1 to 16777215 | |
Introduced | 16.0.R1 | |
Platforms | All |
start number
Synopsis | Lower bound of the VNI range | |
Context | configure qos sap-ingress string ipv6-criteria entry number match vxlan-vni range start number | |
Tree | start | |
Range | 1 to 16777215 | |
Introduced | 16.0.R1 | |
Platforms | All |
tag number
Synopsis | Tag ID associated with the criteria entry | |
Context | configure qos sap-ingress string ipv6-criteria entry number tag number | |
Tree | tag | |
Description | This command associates a tag with the criteria entry. Tag identifiers are not supported in SAP ingress QoS policies, MAC criteria statements, or in SAP egress QoS policies. | |
Range | 0 to 255 | |
Default | 0 | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS |
type keyword
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | IPv6 criteria entry type | |
Context | configure qos sap-ingress string ipv6-criteria type keyword | |
Tree | type | |
Description | This command specifies the type of entries that can be configured for IPv6 match criteria. | |
Options | ||
Default | normal | |
Introduced | 16.0.R1 | |
Platforms | All |
lsp-exp [lsp-exp-value] number
Synopsis | Enter the lsp-exp list instance | |
Context | configure qos sap-ingress string lsp-exp number | |
Tree | lsp-exp | |
Introduced | 16.0.R1 | |
Platforms | All |
[lsp-exp-value] number
Synopsis | LSP EXP value to match the LSP EXP rule | |
Context | configure qos sap-ingress string lsp-exp number | |
Tree | lsp-exp | |
Range | 0 to 7 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
fc string
Synopsis | Forwarding class for traffic matching the LSP EXP value | |
Context | configure qos sap-ingress string lsp-exp number fc string | |
Tree | fc | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
priority keyword
Synopsis | Priority for the matching traffic | |
Context | configure qos sap-ingress string lsp-exp number priority keyword | |
Tree | priority | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
mac-criteria
Synopsis | Enter the mac-criteria context | |
Context | configure qos sap-ingress string mac-criteria | |
Tree | mac-criteria | |
Introduced | 16.0.R1 | |
Platforms | All |
entry [entry-id] number
Synopsis | Enter the entry list instance | |
Context | configure qos sap-ingress string mac-criteria entry number | |
Tree | entry | |
Introduced | 16.0.R1 | |
Platforms | All |
[entry-id] number
Synopsis | Entry ID | |
Context | configure qos sap-ingress string mac-criteria entry number | |
Tree | entry | |
Range | 1 to 65535 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
action
Synopsis | Enter the action context | |
Context | configure qos sap-ingress string mac-criteria entry number action | |
Tree | action | |
Introduced | 16.0.R1 | |
Platforms | All |
fc string
Synopsis | Forwarding class for traffic matching the criteria | |
Context | configure qos sap-ingress string mac-criteria entry number action fc string | |
Tree | fc | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
policer reference
Synopsis | Policer ID for traffic matching the criteria | |
Context | configure qos sap-ingress string mac-criteria entry number action policer reference | |
Tree | policer | |
Reference | configure qos sap-ingress string policer number | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
priority keyword
Synopsis | Priority for the packet | |
Context | configure qos sap-ingress string mac-criteria entry number action priority keyword | |
Tree | priority | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
type keyword
Synopsis | Action for criteria entry | |
Context | configure qos sap-ingress string mac-criteria entry number action type keyword | |
Tree | type | |
Options | ||
Default | ignore-match | |
Introduced | 16.0.R1 | |
Platforms |
All |
description string
Synopsis | Text description | |
Context | configure qos sap-ingress string mac-criteria entry number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
match
Synopsis | Enter the match context | |
Context | configure qos sap-ingress string mac-criteria entry number match | |
Tree | match | |
Introduced | 16.0.R1 | |
Platforms | All |
dot1p
Synopsis | Enable the dot1p context | |
Context | configure qos sap-ingress string mac-criteria entry number match dot1p | |
Tree | dot1p | |
Introduced | 16.0.R1 | |
Platforms | All |
mask number
Synopsis | 3-bit mask for the 802.1p value | |
Context | configure qos sap-ingress string mac-criteria entry number match dot1p mask number | |
Tree | mask | |
Range | 0 to 7 | |
Default | 7 | |
Introduced | 16.0.R1 | |
Platforms |
All |
priority number
Synopsis | 802.1P priority value to use as the match criterion | |
Context | configure qos sap-ingress string mac-criteria entry number match dot1p priority number | |
Tree | priority | |
Range | 0 to 7 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
dst-mac
Synopsis | Enable the dst-mac context | |
Context | configure qos sap-ingress string mac-criteria entry number match dst-mac | |
Tree | dst-mac | |
Introduced | 16.0.R1 | |
Platforms | All |
address string
Synopsis | Destination MAC address as QoS policy match criterion | |
Context | configure qos sap-ingress string mac-criteria entry number match dst-mac address string | |
Tree | address | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
mask string
Synopsis | Mask for destination MAC address | |
Context | configure qos sap-ingress string mac-criteria entry number match dst-mac mask string | |
Tree | mask | |
Default | ff:ff:ff:ff:ff:ff | |
Introduced | 16.0.R1 | |
Platforms | All |
etype string
Synopsis | Ethernet type | |
Context | configure qos sap-ingress string mac-criteria entry number match etype string | |
Tree | etype | |
String Length | 5 to 6 | |
Introduced | 16.0.R1 | |
Platforms | All |
frame-type keyword
Synopsis | Match MAC criteria for ingress SAP QoS policy | |
Context | configure qos sap-ingress string mac-criteria entry number match frame-type keyword | |
Tree | frame-type | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
inner-tag
Synopsis | Enable the inner-tag context | |
Context | configure qos sap-ingress string mac-criteria entry number match inner-tag | |
Tree | inner-tag | |
Introduced | 16.0.R1 | |
Platforms | All |
mask number
Synopsis | Mask to VID of the inner VLAN tag before comparing it with the inner-tag or outer-tag value | |
Context | configure qos sap-ingress string mac-criteria entry number match inner-tag mask number | |
Tree | mask | |
Range | 1 to 4095 | |
Default | 4095 | |
Introduced | 16.0.R1 | |
Platforms |
All |
vlan number
Synopsis | Value to match against the VID of the second VLAN tag | |
Context | configure qos sap-ingress string mac-criteria entry number match inner-tag vlan number | |
Tree | vlan | |
Range | 0 to 4095 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
llc-dsap
Synopsis | Enable the llc-dsap context | |
Context | configure qos sap-ingress string mac-criteria entry number match llc-dsap | |
Tree | llc-dsap | |
Introduced | 16.0.R1 | |
Platforms | All |
dsap number
Synopsis | DSAP value | |
Context | configure qos sap-ingress string mac-criteria entry number match llc-dsap dsap number | |
Tree | dsap | |
Range | 0 to 255 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
mask number
Synopsis | DSAP mask | |
Context | configure qos sap-ingress string mac-criteria entry number match llc-dsap mask number | |
Tree | mask | |
Range | 0 to 255 | |
Default | 255 | |
Introduced | 16.0.R1 | |
Platforms |
All |
llc-ssap
Synopsis | Enable the llc-ssap context | |
Context | configure qos sap-ingress string mac-criteria entry number match llc-ssap | |
Tree | llc-ssap | |
Introduced | 16.0.R1 | |
Platforms | All |
mask number
Synopsis | Source SAP mask | |
Context | configure qos sap-ingress string mac-criteria entry number match llc-ssap mask number | |
Tree | mask | |
Range | 0 to 255 | |
Default | 255 | |
Introduced | 16.0.R1 | |
Platforms |
All |
ssap number
Synopsis | SSAP value | |
Context | configure qos sap-ingress string mac-criteria entry number match llc-ssap ssap number | |
Tree | ssap | |
Range | 0 to 255 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
outer-tag
Synopsis | Enable the outer-tag context | |
Context | configure qos sap-ingress string mac-criteria entry number match outer-tag | |
Tree | outer-tag | |
Introduced | 16.0.R1 | |
Platforms | All |
mask number
Synopsis | First tag carried transparently through the service | |
Context | configure qos sap-ingress string mac-criteria entry number match outer-tag mask number | |
Tree | mask | |
Range | 1 to 4095 | |
Default | 4095 | |
Introduced | 16.0.R1 | |
Platforms |
All |
vlan number
Synopsis | Match against VID of the first VLAN tag in the packet carried transparently through service | |
Context | configure qos sap-ingress string mac-criteria entry number match outer-tag vlan number | |
Tree | vlan | |
Range | 0 to 4095 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
snap-oui keyword
Synopsis | Parameter snap-oui as MAC filter match criteria | |
Context | configure qos sap-ingress string mac-criteria entry number match snap-oui keyword | |
Tree | snap-oui | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
snap-pid number
Synopsis | Parameter snap-pid as MAC filter match criteria | |
Context | configure qos sap-ingress string mac-criteria entry number match snap-pid number | |
Tree | snap-pid | |
Range | 0 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
src-mac
Synopsis | Enable the src-mac context | |
Context | configure qos sap-ingress string mac-criteria entry number match src-mac | |
Tree | src-mac | |
Introduced | 16.0.R1 | |
Platforms | All |
address string
Synopsis | Source MAC address as QoS policy match criterion | |
Context | configure qos sap-ingress string mac-criteria entry number match src-mac address string | |
Tree | address | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
mask string
Synopsis | Mask for source MAC address | |
Context | configure qos sap-ingress string mac-criteria entry number match src-mac mask string | |
Tree | mask | |
Default | ff:ff:ff:ff:ff:ff | |
Introduced | 16.0.R1 | |
Platforms | All |
type keyword
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | MAC criteria filter type | |
Context | configure qos sap-ingress string mac-criteria type keyword | |
Tree | type | |
Options | ||
Default | normal | |
Introduced | 16.0.R1 | |
Platforms | All |
policer [policer-id] number
Synopsis | Enter the policer list instance | |
Context | configure qos sap-ingress string policer number | |
Tree | policer | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
[policer-id] number
Synopsis | SAP-ingress policer identifier | |
Context | configure qos sap-ingress string policer number | |
Tree | policer | |
Range | 1 to 63 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos sap-ingress string policer number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir keyword
Synopsis | Constraint used when deriving the operational CIR value | |
Context | configure qos sap-ingress string policer number adaptation-rule cir keyword | |
Tree | cir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos sap-ingress string policer number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
adv-config-policy reference
Synopsis | Advanced QoS policy name | |
Context | configure qos sap-ingress string policer number adv-config-policy reference | |
Tree | adv-config-policy | |
Reference | configure qos adv-config-policy string | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-parent
Synopsis | Enter the arbiter-parent context | |
Context | configure qos sap-ingress string policer number arbiter-parent | |
Tree | arbiter-parent | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
arbiter-name string
Synopsis | Arbiter name | |
Context | configure qos sap-ingress string policer number arbiter-parent arbiter-name string | |
Tree | arbiter-name | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos sap-ingress string policer number arbiter-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
weight number
Synopsis | Weight used by the arbiter for feeding the policer | |
Context | configure qos sap-ingress string policer number arbiter-parent weight number | |
Tree | weight | |
Range | 1 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cbs (number | keyword)
Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
Context | configure qos sap-ingress string policer number cbs (number | keyword) | |
Tree | cbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
description string
Synopsis | Text description | |
Context | configure qos sap-ingress string policer number description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
high-prio-only (number | keyword)
Synopsis | Percentage of MBS reserved for high priority traffic | |
Context | configure qos sap-ingress string policer number high-prio-only (number | keyword) | |
Tree | high-prio-only | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
mbs (number | keyword)
Synopsis | High priority violate threshold of PIR leaky bucket | |
Context | configure qos sap-ingress string policer number mbs (number | keyword) | |
Tree | mbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
packet-byte-offset number
Synopsis | Packet size modification for policing information | |
Context | configure qos sap-ingress string policer number packet-byte-offset number | |
Tree | packet-byte-offset | |
Range | -32 to 31 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos sap-ingress string policer number percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir decimal-number
Synopsis | Administrative CIR percent | |
Context | configure qos sap-ingress string policer number percent-rate cir decimal-number | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
pir decimal-number
Synopsis | Administrative PIR percent | |
Context | configure qos sap-ingress string policer number percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
reference-rate keyword
Synopsis | Reference rate | |
Context | configure qos sap-ingress string policer number percent-rate reference-rate keyword | |
Tree | reference-rate | |
Options | ||
Default | local-limit | |
Introduced | 20.10.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
profile-capped boolean
Synopsis | Enforce overall in-profile burst limit to CIR bucket | |
Context | configure qos sap-ingress string policer number profile-capped boolean | |
Tree | profile-capped | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
rate
Synopsis | Enter the rate context | |
Context | configure qos sap-ingress string policer number rate | |
Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
cir (number | keyword)
pir (number | keyword)
scheduler-parent
Synopsis | Enter the scheduler-parent context | |
Context | configure qos sap-ingress string policer number scheduler-parent | |
Tree | scheduler-parent | |
Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
cir-level number
Synopsis | Port priority level for within-CIR offered load | |
Context | configure qos sap-ingress string policer number scheduler-parent cir-level number | |
Tree | cir-level | |
Description | This command defines the hierarchy priority level when compared with other policers, queues, and schedulers that the policer uses to receive bandwidth for its within-CIR offered load. If this command is set to the default value, the policer does not receive bandwidth during the within-CIR pass of the scheduler and the cir-weight command is ignored. | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
cir-weight number
Synopsis | Weight to use in the within-CIR port priority level | |
Context | configure qos sap-ingress string policer number scheduler-parent cir-weight number | |
Tree | cir-weight | |
Description | The command defines the relative weight of the policer in comparison with other child policers, queues, or schedulers competing for bandwidth on the parent scheduler name at the within-CIR priority level. A weight is considered to be active when the applicable policer, queue, or scheduler has not reached its maximum rate and still has packets to transmit. When this command is set to a value of 0, the policer receives bandwidth only after the other children with a non-zero weight at this level have been serviced. | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
level number
Synopsis | Priority level for bandwidth on the parent scheduler | |
Context | configure qos sap-ingress string policer number scheduler-parent level number | |
Tree | level | |
Description | This command defines the priority level when compared with other policers, queues, and schedulers when competing for bandwidth on the parent scheduler. Children of the parent scheduler with a lower priority do not receive bandwidth until all children with a higher priority have either reached their maximum bandwidth or are idle. Children with the same level are serviced in relation to their relative weights. | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
scheduler-name string
Synopsis | Scheduler name | |
Context | configure qos sap-ingress string policer number scheduler-parent scheduler-name string | |
Tree | scheduler-name | |
String Length | 1 to 32 | |
Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
weight number
Synopsis | Policer weight at the above-CIR priority level | |
Context | configure qos sap-ingress string policer number scheduler-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 22.2.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
stat-mode keyword
Synopsis | Mode of statistics collected by the policer | |
Context | configure qos sap-ingress string policer number stat-mode keyword | |
Tree | stat-mode | |
Options | ||
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, 7950 XRS, VSR |
policers-hqos-manageable boolean
Synopsis | Manage policers through the hierarchical QoS process | |
Context | configure qos sap-ingress string policers-hqos-manageable boolean | |
Tree | policers-hqos-manageable | |
Default | false | |
Introduced | 22.2.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-1s, 7750 SR-1se, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s |
policy-id number
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Ingress SAP QoS policy ID | |
Context | configure qos sap-ingress string policy-id number | |
Tree | policy-id | |
Range | 1 to 65535 | |
Introduced | 16.0.R1 | |
Platforms | All |
prec [prec-value] number
Synopsis | Enter the prec list instance | |
Context | configure qos sap-ingress string prec number | |
Tree | prec | |
Introduced | 16.0.R1 | |
Platforms | All |
[prec-value] number
Synopsis | Precedence value for which mapping is performed | |
Context | configure qos sap-ingress string prec number | |
Tree | prec | |
Range | 0 to 7 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
fc string
Synopsis | Forwarding class for traffic matching precedence value | |
Context | configure qos sap-ingress string prec number fc string | |
Tree | fc | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
priority keyword
Synopsis | Priority for the matching traffic | |
Context | configure qos sap-ingress string prec number priority keyword | |
Tree | priority | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
queue [queue-id] number
Synopsis | Enter the queue list instance | |
Context | configure qos sap-ingress string queue number | |
Tree | queue | |
Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
Synopsis | SAP-ingress policer identifier | |
Context | configure qos sap-ingress string queue number | |
Tree | queue | |
Range | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
adaptation-rule
Synopsis | Enter the adaptation-rule context | |
Context | configure qos sap-ingress string queue number adaptation-rule | |
Tree | adaptation-rule | |
Introduced | 16.0.R1 | |
Platforms | All |
cir keyword
Synopsis | Constraint used when deriving the operational CIR value | |
Context | configure qos sap-ingress string queue number adaptation-rule cir keyword | |
Tree | cir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
fir keyword
Synopsis | Constraint used when deriving the operational FIR value | |
Context | configure qos sap-ingress string queue number adaptation-rule fir keyword | |
Tree | fir | |
Options | ||
Default | closest | |
Introduced | 16.0.R2 | |
Platforms | All |
pir keyword
Synopsis | Constraint used when deriving the operational PIR value | |
Context | configure qos sap-ingress string queue number adaptation-rule pir keyword | |
Tree | pir | |
Options | ||
Default | closest | |
Introduced | 16.0.R1 | |
Platforms | All |
adv-config-policy reference
Synopsis | Advanced QoS policy name | |
Context | configure qos sap-ingress string queue number adv-config-policy reference | |
Tree | adv-config-policy | |
Reference | configure qos adv-config-policy string | |
Introduced | 16.0.R1 | |
Platforms | All |
burst-limit (number | keyword)
Synopsis | Explicit shaping burst size of a queue | |
Context | configure qos sap-ingress string queue number burst-limit (number | keyword) | |
Tree | burst-limit | |
Range | 1 to 14000000 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
cbs (number | keyword)
Synopsis | Reserved buffer space for the queue | |
Context | configure qos sap-ingress string queue number cbs (number | keyword) | |
Tree | cbs | |
Range | 0 to 1048576 | |
Units | kilobytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-non-profiling boolean
Synopsis | Prevent profile modification of CIR dependent packets | |
Context | configure qos sap-ingress string queue number cir-non-profiling boolean | |
Tree | cir-non-profiling | |
Default | false | |
Introduced | 16.0.R2 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS |
drop-tail
Synopsis | Enter the drop-tail context | |
Context | configure qos sap-ingress string queue number drop-tail | |
Tree | drop-tail | |
Introduced | 16.0.R1 | |
Platforms | All |
low
percent-reduction-from-mbs (number | keyword)
Synopsis | Low drop-tail percent from MBS that is reduced | |
Context | configure qos sap-ingress string queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
mbs (number | keyword)
Synopsis | Maximum buffer space that is allowed for queue | |
Context | configure qos sap-ingress string queue number mbs (number | keyword) | |
Tree | mbs | |
Range | 0 to 1073741824 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
multipoint boolean
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Apply as a multicast queue | |
Context | configure qos sap-ingress string queue number multipoint boolean | |
Tree | multipoint | |
Introduced | 16.0.R1 | |
Platforms | All |
packet-byte-offset number
Synopsis | Packet size modification for queue accounting | |
Context | configure qos sap-ingress string queue number packet-byte-offset number | |
Tree | packet-byte-offset | |
Range | -32 to 30 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos sap-ingress string queue number percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir decimal-number
Synopsis | Administrative CIR percent | |
Context | configure qos sap-ingress string queue number percent-rate cir decimal-number | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
Introduced | 16.0.R1 | |
Platforms | All |
fir decimal-number
Synopsis | Administrative FIR percent | |
Context | configure qos sap-ingress string queue number percent-rate fir decimal-number | |
Tree | fir | |
Range | 0.00 to 100.00 | |
Default | 0.00 | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
Introduced | 16.0.R2 | |
Platforms | All |
pir decimal-number
Synopsis | Administrative PIR percent | |
Context | configure qos sap-ingress string queue number percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 16.0.R1 | |
Platforms | All |
police
Synopsis | Drop out-of-profile traffic feeding into queue instance | |
Context | configure qos sap-ingress string queue number percent-rate police | |
Tree | police | |
Notes | The following elements are part of a choice: (cir and fir) or police. | |
Introduced | 16.0.R1 | |
Platforms | All |
reference-rate keyword
Synopsis | Reference rate | |
Context | configure qos sap-ingress string queue number percent-rate reference-rate keyword | |
Tree | reference-rate | |
Options | ||
Default | port-limit | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-mode keyword
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Operating mode for this queue | |
Context | configure qos sap-ingress string queue number queue-mode keyword | |
Tree | queue-mode | |
Options | ||
Default | priority | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-type keyword
WARNING: Modifying this element recreates the parent element automatically for the new value to take effect. | ||
Synopsis | Method used to service queue from hardware perspective | |
Context | configure qos sap-ingress string queue number queue-type keyword | |
Tree | queue-type | |
Options | ||
Default | auto-expedited | |
Introduced | 16.0.R1 | |
Platforms | All |
rate
Synopsis | Enter the rate context | |
Context | configure qos sap-ingress string queue number rate | |
Tree | rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir (number | keyword)
fir (number | keyword)
pir (number | keyword)
police
scheduler-parent
Synopsis | Enter the scheduler-parent context | |
Context | configure qos sap-ingress string queue number scheduler-parent | |
Tree | scheduler-parent | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos sap-ingress string queue number scheduler-parent cir-level number | |
Tree | cir-level | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
Synopsis | Weight used at the within-CIR port priority level | |
Context | configure qos sap-ingress string queue number scheduler-parent cir-weight number | |
Tree | cir-weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos sap-ingress string queue number scheduler-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
scheduler-name string
Synopsis | Scheduler name | |
Context | configure qos sap-ingress string queue number scheduler-parent scheduler-name string | |
Tree | scheduler-name | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
weight number
Synopsis | Relative weight of the scheduler to feed the queue | |
Context | configure qos sap-ingress string queue number scheduler-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
scope keyword
Synopsis | Scope of the policy | |
Context | configure qos sap-ingress string scope keyword | |
Tree | scope | |
Options | ||
Default | template | |
Introduced | 16.0.R1 | |
Platforms | All |
subscriber-mgmt
Synopsis | Enter the subscriber-mgmt context | |
Context | configure qos sap-ingress string subscriber-mgmt | |
Tree | subscriber-mgmt | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
dynamic-policer
Synopsis | Enter the dynamic-policer context | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer | |
Tree | dynamic-policer | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arbiter-parent
Synopsis | Enter the arbiter-parent context | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer arbiter-parent | |
Tree | arbiter-parent | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
arbiter-name string
Synopsis | Arbiter name | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer arbiter-parent arbiter-name string | |
Tree | arbiter-name | |
String Length | 1 to 32 | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer arbiter-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
weight number
Synopsis | Weight used by the arbiter for feeding the policer | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer arbiter-parent weight number | |
Tree | weight | |
Range | 1 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
cbs (number | keyword)
Synopsis | Exceed threshold of the CIR leaky bucket of the policer | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer cbs (number | keyword) | |
Tree | cbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
mbs (number | keyword)
Synopsis | High priority violate threshold of PIR leaky bucket of this policer | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer mbs (number | keyword) | |
Tree | mbs | |
Range | 0 to 268435456 | |
Units | bytes | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
packet-byte-offset number
Synopsis | Packet size modification for policing information | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer packet-byte-offset number | |
Tree | packet-byte-offset | |
Range | -32 to 31 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
policer-id-range
Synopsis | Enable the policer-id-range context | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer policer-id-range | |
Tree | policer-id-range | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end number
Synopsis | Upper bound of the dynamic policer ID range | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer policer-id-range end number | |
Tree | end | |
Range | 1 to 63 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start number
Synopsis | Lower bound of the dynamic policer ID range | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer policer-id-range start number | |
Tree | start | |
Range | 1 to 63 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
stat-mode keyword
Synopsis | Mode of statistics collected by the policer | |
Context | configure qos sap-ingress string subscriber-mgmt dynamic-policer stat-mode keyword | |
Tree | stat-mode | |
Options | ||
Default | minimal | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
pcc-rule-entry
Synopsis | Enter the pcc-rule-entry context | |
Context | configure qos sap-ingress string subscriber-mgmt pcc-rule-entry | |
Tree | pcc-rule-entry | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
range
Synopsis | Enable the range context | |
Context | configure qos sap-ingress string subscriber-mgmt pcc-rule-entry range | |
Tree | range | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
end number
Synopsis | Upper bound of the filter and QoS policy entries range | |
Context | configure qos sap-ingress string subscriber-mgmt pcc-rule-entry range end number | |
Tree | end | |
Range | 1 to 65535 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
start number
Synopsis | Lower bound of the filter and QoS policy entries range | |
Context | configure qos sap-ingress string subscriber-mgmt pcc-rule-entry range start number | |
Tree | start | |
Range | 1 to 65535 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR |
scheduler-policy [scheduler-policy-name] string
Synopsis | Enter the scheduler-policy list instance | |
Context | configure qos scheduler-policy string | |
Tree | scheduler-policy | |
Max. Instances | 2047 | |
Introduced | 16.0.R1 | |
Platforms | All |
[scheduler-policy-name] string
Synopsis | Scheduler policy name | |
Context | configure qos scheduler-policy string | |
Tree | scheduler-policy | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos scheduler-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
frame-based-accounting boolean
Synopsis | Use frame-based accounting for queues and schedulers | |
Context | configure qos scheduler-policy string frame-based-accounting boolean | |
Tree | frame-based-accounting | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
tier [tier-id] number
Synopsis | Enter the tier list instance | |
Context | configure qos scheduler-policy string tier number | |
Tree | tier | |
Introduced | 16.0.R1 | |
Platforms | All |
[tier-id] number
Synopsis | Tier for scheduler-policy scheduler | |
Context | configure qos scheduler-policy string tier number | |
Tree | tier | |
Range | 1 to 3 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
parent-location keyword
Synopsis | Expected location of parent schedulers | |
Context | configure qos scheduler-policy string tier number parent-location keyword | |
Tree | parent-location | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
scheduler [scheduler-name] string
Synopsis | Enter the scheduler list instance | |
Context | configure qos scheduler-policy string tier number scheduler string | |
Tree | scheduler | |
Introduced | 16.0.R1 | |
Platforms | All |
[scheduler-name] string
Synopsis | Scheduler name | |
Context | configure qos scheduler-policy string tier number scheduler string | |
Tree | scheduler | |
Description | This command specifies the scheduler name which is composed of printable 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes. Each scheduler must have a unique name within the context of the scheduler policy. However, the same name can be reused in multiple scheduler policies. If the scheduler name already exists within the policy tier level, the context changes to that scheduler name for the purpose of editing the scheduler commands. If the scheduler name exists within the policy on a different tier, an error occurs and the current context will not change. If the scheduler name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. If the provided scheduler name is invalid, a name syntax error occurs, the command does not execute, and the context is not change. | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos scheduler-policy string tier number scheduler string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
limit-unused-bandwidth boolean
Synopsis | Enable aggregate rate overrun protection | |
Context | configure qos scheduler-policy string tier number scheduler string limit-unused-bandwidth boolean | |
Tree | limit-unused-bandwidth | |
Default | false | |
Introduced | 16.0.R1 | |
Platforms | All |
percent-rate
Synopsis | Enter the percent-rate context | |
Context | configure qos scheduler-policy string tier number scheduler string percent-rate | |
Tree | percent-rate | |
Notes | The following elements are part of a choice: percent-rate or rate. | |
Introduced | 20.10.R1 | |
Platforms | All |
cir (keyword | decimal-number)
Synopsis | Scheduler CIR | |
Context | configure qos scheduler-policy string tier number scheduler string percent-rate cir (keyword | decimal-number) | |
Tree | cir | |
Range | 0.00 to 100.00 | |
Options | ||
Default | sum | |
Introduced | 20.10.R1 | |
Platforms | All |
pir decimal-number
Synopsis | Scheduler PIR | |
Context | configure qos scheduler-policy string tier number scheduler string percent-rate pir decimal-number | |
Tree | pir | |
Range | 0.01 to 100.00 | |
Introduced | 20.10.R1 | |
Platforms | All |
reference-rate keyword
Synopsis | Reference rate | |
Context | configure qos scheduler-policy string tier number scheduler string percent-rate reference-rate keyword | |
Tree | reference-rate | |
Options | ||
Default | reference-port-limit | |
Introduced | 20.10.R1 | |
Platforms | All |
port-parent
Synopsis | Enable the port-parent context | |
Context | configure qos scheduler-policy string tier number scheduler string port-parent | |
Tree | port-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
Synopsis | Port priority to receive bandwidth for within-CIR pass | |
Context | configure qos scheduler-policy string tier number scheduler string port-parent cir-level number | |
Tree | cir-level | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
Synopsis | Weight used at the within-CIR port priority level | |
Context | configure qos scheduler-policy string tier number scheduler string port-parent cir-weight number | |
Tree | cir-weight | |
Range | 0 to 100 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
level number
Synopsis | Port priority for bandwidth for above-CIR offered load | |
Context | configure qos scheduler-policy string tier number scheduler string port-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
weight number
Synopsis | Weight used at the above-CIR port priority level | |
Context | configure qos scheduler-policy string tier number scheduler string port-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
rate
cir (number | keyword)
pir (number | keyword)
scheduler-parent
Synopsis | Enable the scheduler-parent context | |
Context | configure qos scheduler-policy string tier number scheduler string scheduler-parent | |
Tree | scheduler-parent | |
Notes | The following elements are part of a choice: port-parent or scheduler-parent. | |
Introduced | 16.0.R1 | |
Platforms | All |
cir-level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos scheduler-policy string tier number scheduler string scheduler-parent cir-level number | |
Tree | cir-level | |
Range | 0 to 8 | |
Default | 0 | |
Introduced | 16.0.R1 | |
Platforms |
All |
cir-weight number
Synopsis | Weight used at the within-CIR port priority level | |
Context | configure qos scheduler-policy string tier number scheduler string scheduler-parent cir-weight number | |
Tree | cir-weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
level number
Synopsis | Level of priority while feeding to the parent | |
Context | configure qos scheduler-policy string tier number scheduler string scheduler-parent level number | |
Tree | level | |
Range | 1 to 8 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
scheduler-name string
Synopsis | Scheduler name | |
Context | configure qos scheduler-policy string tier number scheduler string scheduler-parent scheduler-name string | |
Tree | scheduler-name | |
String Length | 1 to 32 | |
Notes | This element is mandatory. | |
Introduced | 16.0.R1 | |
Platforms | All |
weight number
Synopsis | Relative weight of the scheduler to feed the queue | |
Context | configure qos scheduler-policy string tier number scheduler string scheduler-parent weight number | |
Tree | weight | |
Range | 0 to 100 | |
Default | 1 | |
Introduced | 16.0.R1 | |
Platforms |
All |
shared-queue [shared-queue-policy-name] string
Synopsis | Enter the shared-queue list instance | |
Context | configure qos shared-queue string | |
Tree | shared-queue | |
Introduced | 16.0.R1 | |
Platforms | All |
[shared-queue-policy-name] string
Synopsis | Name of the default shared queue policy | |
Context | configure qos shared-queue string | |
Tree | shared-queue | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos shared-queue string description string | |
Tree | description | |
String Length | 0 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
fc [fc-name] keyword
Synopsis | Enter the fc list instance | |
Context | configure qos shared-queue string fc keyword | |
Tree | fc | |
Introduced | 16.0.R1 | |
Platforms | All |
[fc-name] keyword
Synopsis | Forwarding class mapping to queue mapping | |
Context | configure qos shared-queue string fc keyword | |
Tree | fc | |
Options | ||
Notes |
This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
broadcast-queue number
Synopsis | ID of queue to forward all broadcast traffic | |
Context | configure qos shared-queue string fc keyword broadcast-queue number | |
Tree | broadcast-queue | |
Range | 9 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
multicast-queue number
Synopsis | ID of queue to forward multicast traffic | |
Context | configure qos shared-queue string fc keyword multicast-queue number | |
Tree | multicast-queue | |
Range | 9 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
queue number
Synopsis | ID of queue to foward all traffic | |
Context | configure qos shared-queue string fc keyword queue number | |
Tree | queue | |
Range | 1 to 8 | |
Introduced | 16.0.R1 | |
Platforms | All |
unknown-queue number
Synopsis | ID of queue to forward unknown unicast traffic | |
Context | configure qos shared-queue string fc keyword unknown-queue number | |
Tree | unknown-queue | |
Range | 9 to 32 | |
Introduced | 16.0.R1 | |
Platforms | All |
queue [queue-id] number
Synopsis | Enter the queue list instance | |
Context | configure qos shared-queue string queue number | |
Tree | queue | |
Introduced | 16.0.R1 | |
Platforms | All |
[queue-id] number
Synopsis | Shared queue identifier | |
Context | configure qos shared-queue string queue number | |
Tree | queue | |
Range | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
cbs number
Synopsis | Committed burst size as a percentage of the MBS | |
Context | configure qos shared-queue string queue number cbs number | |
Tree | cbs | |
Range | 0 to 100 | |
Units | percent | |
Introduced | 16.0.R1 | |
Platforms |
All |
drop-tail
Synopsis | Enter the drop-tail context | |
Context | configure qos shared-queue string queue number drop-tail | |
Tree | drop-tail | |
Introduced | 16.0.R1 | |
Platforms | All |
low
percent-reduction-from-mbs (number | keyword)
Synopsis | Low drop-tail percent from MBS that is reduced | |
Context | configure qos shared-queue string queue number drop-tail low percent-reduction-from-mbs (number | keyword) | |
Tree | percent-reduction-from-mbs | |
Range | 0 to 100 | |
Options | ||
Default | auto | |
Introduced | 16.0.R1 | |
Platforms | All |
mbs number
Synopsis | Maximum buffers for the ingress shared queue | |
Context | configure qos shared-queue string queue number mbs number | |
Tree | mbs | |
Range | 0 to 100 | |
Units | percent | |
Introduced | 16.0.R1 | |
Platforms |
All |
multipoint boolean
Synopsis | Apply as a multicast queue | |
Context | configure qos shared-queue string queue number multipoint boolean | |
Tree | multipoint | |
Introduced | 16.0.R1 | |
Platforms | All |
queue-type keyword
Synopsis | Method used to service queue from hardware perspective | |
Context | configure qos shared-queue string queue number queue-type keyword | |
Tree | queue-type | |
Options | ||
Default | auto-expedited | |
Introduced | 16.0.R1 | |
Platforms | All |
rate
Synopsis | Enter the rate context | |
Context | configure qos shared-queue string queue number rate | |
Tree | rate | |
Introduced | 16.0.R1 | |
Platforms | All |
cir number
fir number
pir number
slope-policy [slope-policy-name] string
Synopsis | Enter the slope-policy list instance | |
Context | configure qos slope-policy string | |
Tree | slope-policy | |
Max. Instances | 511 | |
Introduced | 16.0.R1 | |
Platforms | All |
[slope-policy-name] string
Synopsis | Slope policy name | |
Context | configure qos slope-policy string | |
Tree | slope-policy | |
String Length | 1 to 32 | |
Notes | This element is part of a list key. | |
Introduced | 16.0.R1 | |
Platforms | All |
description string
Synopsis | Text description | |
Context | configure qos slope-policy string description string | |
Tree | description | |
String Length | 1 to 80 | |
Introduced | 16.0.R1 | |
Platforms | All |
exceed-slope
Synopsis | Enter the exceed-slope context | |
Context | configure qos slope-policy string exceed-slope | |
Tree | exceed-slope | |
Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
Synopsis | Administrative state of the exceed-priority RED slope | |
Context | configure qos slope-policy string exceed-slope admin-state keyword | |
Tree | admin-state | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
max-avg number
Synopsis | Buffer percentage after which drop probability is one | |
Context | configure qos slope-policy string exceed-slope max-avg number | |
Tree | max-avg | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
max-prob number
Synopsis | Drop probability to increase at exceed start-average | |
Context | configure qos slope-policy string exceed-slope max-prob number | |
Tree | max-prob | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
start-avg number
Synopsis | Buffer percentage after which drop probability starts to rise above zero | |
Context | configure qos slope-policy string exceed-slope start-avg number | |
Tree | start-avg | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
high-slope
Synopsis | Enter the high-slope context | |
Context | configure qos slope-policy string high-slope | |
Tree | high-slope | |
Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
Synopsis | Administrative state of the high priority RED slope | |
Context | configure qos slope-policy string high-slope admin-state keyword | |
Tree | admin-state | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
max-avg number
Synopsis | Buffer percentage after which drop probability is one | |
Context | configure qos slope-policy string high-slope max-avg number | |
Tree | max-avg | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
max-prob number
Synopsis | Drop probability to increase at high start-average | |
Context | configure qos slope-policy string high-slope max-prob number | |
Tree | max-prob | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
start-avg number
Synopsis | Buffer percentage after which drop probability starts to rise above zero | |
Context | configure qos slope-policy string high-slope start-avg number | |
Tree | start-avg | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
highplus-slope
Synopsis | Enter the highplus-slope context | |
Context | configure qos slope-policy string highplus-slope | |
Tree | highplus-slope | |
Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
Synopsis | Administrative state of the highplus priority RED slope | |
Context | configure qos slope-policy string highplus-slope admin-state keyword | |
Tree | admin-state | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
max-avg number
Synopsis | Buffer percentage after which drop probability is one | |
Context | configure qos slope-policy string highplus-slope max-avg number | |
Tree | max-avg | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
max-prob number
Synopsis | Drop probability increase at highplus start-average | |
Context | configure qos slope-policy string highplus-slope max-prob number | |
Tree | max-prob | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
start-avg number
Synopsis | Buffer percentage after which drop probability starts to rise above zero | |
Context | configure qos slope-policy string highplus-slope start-avg number | |
Tree | start-avg | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
low-slope
Synopsis | Enter the low-slope context | |
Context | configure qos slope-policy string low-slope | |
Tree | low-slope | |
Introduced | 16.0.R1 | |
Platforms | All |
admin-state keyword
Synopsis | Administrative state of the low priority RED slope | |
Context | configure qos slope-policy string low-slope admin-state keyword | |
Tree | admin-state | |
Options | ||
Introduced | 16.0.R1 | |
Platforms |
All |
max-avg number
Synopsis | Buffer percentage after which drop probability is one | |
Context | configure qos slope-policy string low-slope max-avg number | |
Tree | max-avg | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
max-prob number
Synopsis | Drop probability to increase at low start-average | |
Context | configure qos slope-policy string low-slope max-prob number | |
Tree | max-prob | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
start-avg number
Synopsis | Buffer percentage after which drop probability starts to rise above zero | |
Context | configure qos slope-policy string low-slope start-avg number | |
Tree | start-avg | |
Range | 0 to 100 | |
Introduced | 16.0.R1 | |
Platforms | All |
time-average-factor number
Synopsis | Weighting factor to calculate shared buffer utilization | |
Context | configure qos slope-policy string time-average-factor number | |
Tree | time-average-factor | |
Range | 0 to 15 | |
Default | 7 | |
Introduced | 16.0.R1 | |
Platforms |
All |