oam

oam
+  ethcfm
   -  cfm-stack-table
      -  interface
         -  interface interface string level number direction keyword 
            -  association-id string
            -  defects keyword
            -  domain-id string
            -  mac-address string
            -  mep-id number
      -  subinterface
         -  subinterface subinterface string primary-vlan (number | keyword) level number direction keyword 
            -  association-id string
            -  defects keyword
            -  domain-id string
            -  mac-address string
            -  mep-id number
            -  subinterface-type string
   +  domain domain-id string 
      +  association association-id string 
         -  association-auto-discovered-meps mep-id number 
         +  association-format keyword
         +  association-meps mep-id number 
         +  ccm-hold-time
            +  delay-timeout number
         +  ccm-interval keyword
         +  ma-name
            +  icc-value string
            +  id string
            +  name string
            +  number number
            +  vid number
         +  mep mep-id reference 
            +  admin-state keyword
            +  ccm-ltm-priority number
            +  continuity-check
               -  active-defects keyword
               +  ccm-local-fault
                  +  action keyword
               -  ccm-sequence-error-count number
               +  ccm-transmit keyword
               -  highest-priority-defect-found keyword
               -  last-cross-connect-ccm binary
               -  last-error-ccm binary
               +  lowest-fault-priority-defect keyword
               -  sent-interface-status keyword
               -  sent-port-status keyword
               -  sent-remote-defect-indicator boolean
            +  direction keyword
            +  interface-ref
               +  interface reference
               +  subinterface reference
            -  linktrace
               -  latest-run
                  -  destination-mac-address string
                  -  end-time string
                  -  priority number
                  -  remote-mep-id number
                  -  reply reply-order number 
                     -  chassis-id (mac-address | string | binary)
                     -  chassis-id-subtype (number | keyword)
                     -  egress-action keyword
                     -  egress-mac string
                     -  egress-port-id
                        -  port-id-subtype keyword
                        -  value (mac-address | string | binary)
                     -  forwarded boolean
                     -  ingress-action keyword
                     -  ingress-mac string
                     -  ingress-port-id
                        -  port-id-subtype keyword
                        -  value (mac-address | string | binary)
                     -  last-egress-identifier
                        -  integer number
                        -  mac-address string
                     -  ltr-relay keyword
                     -  management-address string
                     -  management-address-domain string
                     -  next-egress-identifier
                        -  integer number
                        -  mac-address string
                     -  reply-ttl number
                     -  terminal-mep boolean
                  -  start-time string
                  -  test-status keyword
                  -  transaction-id number
                  -  transmit-ltm-flags bits
                  -  ttl number
               -  next-transaction-number number
               -  status keyword
               -  unexpected-ltr-received number
            -  loopback
               -  multicast-latest-run
                  -  data-length number
                  -  end-time string
                  -  interval keyword
                  -  priority number
                  -  remote-mep-mac remote-mac-address string 
                     -  sequence-number sequence-number number received-index number 
                  -  start-time string
                  -  statistics
                     -  received-packets number
                     -  transmitted-packets number
                  -  test-status keyword
               -  next-sequence-number number
               -  status keyword
               -  unicast-latest-run
                  -  data-length number
                  -  destination-mac-address string
                  -  end-time string
                  -  interval keyword
                  -  priority number
                  -  remote-mep-id number
                  -  sequence-number number
                  -  start-time string
                  -  statistics
                     -  packet-loss decimal-number
                     -  received-bad-msdu number
                     -  received-in-order number
                     -  received-out-of-order number
                     -  sent-packets number
                  -  test-status keyword
            -  remote-mep remote-mep-id number 
               -  auto-discovered boolean
               -  chassis-id (mac-address | string | binary)
               -  chassis-id-subtype (number | keyword)
               -  interface-status-tlv keyword
               -  mac-address string
               -  management-address string
               -  management-address-domain string
               -  port-status-tlv keyword
               -  receiving-ccm boolean
               -  remote-defect-indicator boolean
               -  remote-mep-failed-ok-time number
               -  remote-mep-state keyword
         +  network-instance
            +  name reference
         +  remote-mep-auto-discovery
            +  admin-state keyword
            +  aging-timer (number | keyword)
      +  domain-format keyword
      +  level number
      +  md-name
         +  dns string
         +  mac string
         +  name string
         +  two-octet-int number
   -  learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number 
      -  remote-mac-address string
      -  stale-flag boolean
   -  statistics
      -  error-discards number
      -  receive-congestion-drops number
      -  receive-count number
      -  transmit-congestion-drops number
      -  transmit-count number
+  ippm
   +  source-udp-port-pools
      +  port port-number number 
         +  application-assignment keyword
         -  in-use boolean
+  link-measurement
   +  interface name string 
      -  aggregate-newest-index number
      -  destination-ip-auto-assigned boolean
      -  detectable-transmit-error keyword
      +  dynamic-measurement
         +  link-measurement-template reference
         +  stamp
            +  ipv4
               +  admin-state keyword
               +  destination-ip string
               +  source-ip string
            +  ipv6
               +  admin-state keyword
               +  destination-ip string
               +  source-ip string
      -  in-use-destination-udp-port number
      -  in-use-source-udp-port number
      +  interface-ref
         +  interface reference
         +  subinterface reference
      -  last-reported-dynamic-delay (number | keyword)
      -  oper-state keyword
      -  operational-destination-address (ipv4-address | ipv6-address)
      -  operational-failure keyword
      -  operational-source-address (ipv4-address | ipv6-address)
      -  report-timestamp string
      -  report-triggered-by keyword
      -  reporting boolean
      -  sample-newest-index number
      -  source-ip-auto-assigned boolean
      -  stamp-session-sender-id number
      -  statistics
         -  aggregate-sample-window
            -  index index number 
               -  average number
               -  end-timestamp-utc string
               -  integrity boolean
               -  maximum number
               -  minimum number
               -  result number
               -  sample-window-count number
               -  window-state keyword
         -  sample-window
            -  index index number 
               -  average number
               -  duplicate-packet-count number
               -  end-timestamp-utc string
               -  error-count number
               -  integrity boolean
               -  maximum number
               -  minimum number
               -  received-packets number
               -  result number
               -  stamp-malformed-flag-count number
               -  stamp-unrecognized-flag-count number
               -  transmitted-packets number
               -  window-state keyword
               -  zero-or-negative-delay-count number
   +  measurement-template template-name string 
      +  admin-state keyword
      +  aggregate-sample-window
         +  multiplier number
         +  threshold
            +  absolute number
            +  relative number
         +  window-integrity number
      +  delay keyword
      +  description string
      +  interval number
      +  last-reported-dynamic-delay-hold number
      +  reporting boolean
      +  sample-window
         +  multiplier number
         +  threshold
            +  absolute number
            +  relative number
         +  window-integrity number
      +  stamp
         +  destination-udp-port number
         +  dscp (number | keyword)
         +  forwarding-class reference
         +  ipv6-destination-discovery
            +  admin-state keyword
            +  discovery-interval number
            +  discovery-timer number
            +  update-interval number
         +  pad-tlv-size number
         +  profile keyword
         +  return-path
            +  link boolean
         +  source-udp-port number
         +  ttl number
      +  unidirectional-measurement keyword
-  lsp-ping
   -  ldp
      -  fec prefix (ipv4-prefix | ipv6-prefix) 
         -  session-id id number 
            -  path-destination
               -  ip-address (ipv4-address | ipv6-address)
               -  next-hop (ipv4-address | ipv6-address)
               -  subinterface string
            -  sequence sequence-id number 
               -  out-interface string
               -  probe-size number
               -  reply
                  -  mpls-ttl number
                  -  received boolean
                  -  reply-sender (ipv4-address | ipv6-address)
                  -  return-code keyword
                  -  return-subcode number
                  -  round-trip-time number
                  -  udp-data-length number
               -  request-sent boolean
               -  send-failure-reason keyword
            -  statistics
               -  round-trip-time
                  -  average number
                  -  maximum number
                  -  minimum number
                  -  standard-deviation number
            -  test-active boolean
   -  sr-isis
      -  prefix-sid prefix (ipv4-prefix | ipv6-prefix) 
         -  session-id id number 
            -  path-destination
               -  ip-address (ipv4-address | ipv6-address)
               -  next-hop (ipv4-address | ipv6-address)
               -  subinterface string
            -  sequence sequence-id number 
               -  out-interface string
               -  probe-size number
               -  reply
                  -  mpls-ttl number
                  -  received boolean
                  -  reply-sender (ipv4-address | ipv6-address)
                  -  return-code keyword
                  -  return-subcode number
                  -  round-trip-time number
                  -  udp-data-length number
               -  request-sent boolean
               -  send-failure-reason keyword
            -  statistics
               -  round-trip-time
                  -  average number
                  -  maximum number
                  -  minimum number
                  -  standard-deviation number
            -  test-active boolean
   -  te-policy
      -  sr-uncolored
         -  policy policy-name string protocol-origin keyword 
            -  session-id id number 
               -  path-destination
                  -  ip-address (ipv4-address | ipv6-address)
                  -  next-hop (ipv4-address | ipv6-address)
                  -  subinterface string
               -  sequence sequence-id number 
                  -  out-interface string
                  -  probe-size number
                  -  reply
                     -  mpls-ttl number
                     -  received boolean
                     -  reply-sender (ipv4-address | ipv6-address)
                     -  return-code keyword
                     -  return-subcode number
                     -  round-trip-time number
                     -  udp-data-length number
                  -  request-sent boolean
                  -  send-failure-reason keyword
               -  statistics
                  -  round-trip-time
                     -  average number
                     -  maximum number
                     -  minimum number
                     -  standard-deviation number
               -  test-active boolean
-  lsp-trace
   -  ldp
      -  fec prefix (ipv4-prefix | ipv6-prefix) 
         -  session-id id number 
            -  hop hop-index number 
               -  probe probe-index number 
                  -  downstream-detailed-mapping id number 
                     -  address-type keyword
                     -  downstream-interface-address (ipv4-address | ipv6-address)
                     -  downstream-router-address (ipv4-address | ipv6-address)
                     -  mpls-label index number 
                        -  label (number | keyword)
                        -  protocol keyword
                     -  mtu number
                  -  last-probe-send-failure-reason keyword
                  -  probe-size number
                  -  probes-sent number
                  -  reply
                     -  mpls-ttl number
                     -  received boolean
                     -  reply-sender (ipv4-address | ipv6-address)
                     -  return-code keyword
                     -  return-subcode number
                     -  round-trip-time number
                     -  udp-data-length number
            -  path-destination
               -  ip-address (ipv4-address | ipv6-address)
               -  next-hop (ipv4-address | ipv6-address)
               -  subinterface string
            -  test-active boolean
   -  sr-isis
      -  prefix-sid prefix (ipv4-prefix | ipv6-prefix) 
         -  session-id id number 
            -  hop hop-index number 
               -  probe probe-index number 
                  -  downstream-detailed-mapping id number 
                     -  address-type keyword
                     -  downstream-interface-address (ipv4-address | ipv6-address)
                     -  downstream-router-address (ipv4-address | ipv6-address)
                     -  mpls-label index number 
                        -  label (number | keyword)
                        -  protocol keyword
                     -  mtu number
                  -  last-probe-send-failure-reason keyword
                  -  probe-size number
                  -  probes-sent number
                  -  reply
                     -  mpls-ttl number
                     -  received boolean
                     -  reply-sender (ipv4-address | ipv6-address)
                     -  return-code keyword
                     -  return-subcode number
                     -  round-trip-time number
                     -  udp-data-length number
            -  path-destination
               -  ip-address (ipv4-address | ipv6-address)
               -  next-hop (ipv4-address | ipv6-address)
               -  subinterface string
            -  test-active boolean
   -  te-policy
      -  sr-uncolored
         -  policy policy-name string protocol-origin keyword 
            -  session-id id number 
               -  hop hop-index number 
                  -  probe probe-index number 
                     -  downstream-detailed-mapping id number 
                        -  address-type keyword
                        -  downstream-interface-address (ipv4-address | ipv6-address)
                        -  downstream-router-address (ipv4-address | ipv6-address)
                        -  mpls-label index number 
                           -  label (number | keyword)
                           -  protocol keyword
                        -  mtu number
                     -  last-probe-send-failure-reason keyword
                     -  probe-size number
                     -  probes-sent number
                     -  reply
                        -  mpls-ttl number
                        -  received boolean
                        -  reply-sender (ipv4-address | ipv6-address)
                        -  return-code keyword
                        -  return-subcode number
                        -  round-trip-time number
                        -  udp-data-length number
               -  path-destination
                  -  ip-address (ipv4-address | ipv6-address)
                  -  next-hop (ipv4-address | ipv6-address)
                  -  subinterface string
               -  test-active boolean
+  stamp
   +  session-reflector
      +  inactivity-timer number
      +  network-instance name reference 
         +  admin-state keyword
         +  description string
         +  ip-prefix ip-prefix (ipv4-prefix | ipv6-prefix) 
         -  oper-state keyword
         -  statistics
            -  malformed-packet number
            -  packet-discards-source-destination-equal number
            -  prefix-match-failure number
            -  session-reflector-udp-port-registration-failure number
            -  test-frames-received number
            -  test-frames-sent number
            -  test-sessions number
         -  test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number session-identifier number 
            -  current-ref-wait number
            -  last-sequence-number-received number
            -  last-sequence-number-transmitted number
            -  malformed-tlv number
            -  test-frames-received number
            -  test-frames-sent number
         +  udp-port number
      -  statistics
         -  packet-discards-on-reception number
         -  packet-discards-on-transmission number
         -  reflector-table-entries-full number
         -  reflectors-configured number
         -  reflectors-not-operational number
         -  reflectors-operational number
         -  session-reflector-not-found number
         -  test-frames-received number
         -  test-frames-sent number
         -  test-session-count number
+  twamp
   +  server
      +  network-instance name reference 
         +  admin-state keyword
         +  client-connection prefix (ipv4-prefix | ipv6-prefix) 
            +  maximum-connections number
            +  maximum-sessions number
            -  statistics
               -  control-connections-active number
               -  control-connections-rejected number
               -  test-packets-received number
               -  test-packets-transmitted number
               -  test-sessions-aborted number
               -  test-sessions-active number
               -  test-sessions-completed number
               -  test-sessions-rejected number
         -  control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number 
            -  control-packet-dscp number
            -  selected-mode keyword
            -  state keyword
            -  statistics
               -  test-packets-received number
               -  test-packets-transmitted number
               -  test-sessions-aborted number
               -  test-sessions-active number
               -  test-sessions-completed number
               -  test-sessions-rejected number
         +  control-packet-dscp (number | keyword)
         +  description string
         +  enforce-test-session-start-time boolean
         +  maximum-connections number
         +  maximum-sessions number
         -  modes keyword
         -  oper-state keyword
         +  servwait number
         -  session-reflector
            -  test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number 
               -  last-sequence-number-received number
               -  last-sequence-number-transmitted number
               -  parent-connection-client-ip (ipv4-address | ipv6-address)
               -  parent-connection-client-tcp-port number
               -  parent-connection-server-ip (ipv4-address | ipv6-address)
               -  parent-connection-server-tcp-port number
               -  statistics
                  -  test-packets-received number
                  -  test-packets-transmitted number
               -  test-packet-dscp number
               -  test-session-id string
         -  statistics
            -  control-connections-active number
            -  control-connections-rejected number
            -  test-packets-received number
            -  test-packets-transmitted number
            -  test-sessions-aborted number
            -  test-sessions-active number
            -  test-sessions-completed number
            -  test-sessions-rejected number
   -  statistics
      -  dropped-connection-states
         -  active number
         -  idle number
         -  process-started number
         -  process-stop number
         -  process-tw-session number
         -  setup-wait number
         -  started number
      -  dropped-connections
         -  connection-timeout number
         -  control-command-not-valid number
         -  incorrect-stop-session-count number
         -  invalid-invalid-hmac number
         -  maximum-global-limit-exceed number
         -  maximum-prefix-limit-exceed number
         -  memory-allocation-error number
         -  message-send-error number
         -  no-client-prefix-match number
         -  no-internal-resource number
         -  non-zero-sid-in-client-control-message number
         -  tcp-connection-closed number
         -  tcp-connection-fatal-error number
         -  tcp-unexpected-event number
         -  unspecified-mode number
         -  unsupported-mode number
      -  dropped-test-packet
         -  arrived-before-start-time number
         -  incorrect-packet-size number
         -  incorrect-source-address number
         -  invalid-error-estimate number
         -  invalid-server-octets number
         -  invalid-symmetric-mbz number
         -  no-start-sessions number
         -  reply-error number
      -  rejected-session
         -  bad-type-p number
         -  client-source-ip-unreachable number
         -  duplicate-session number
         -  invalid-ip-address-version number
         -  maximum-global-session-exceed number
         -  maximum-prefix-session-exceed number
         -  no-internal-resource number
         -  non-local-ip-destination number
         -  non-zero-mbz-value number
         -  non-zero-session-sender-sid number
         -  padding-too-big number
         -  refwait-timeout number
         -  timeout-too-large number
         -  udp-port-in-use number

oam Descriptions

oam

Description Enclosing container for OAM
Context oam
Treeoam
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

ethcfm

Description OAM configuration and operational data for the management of Ethernet (ETH-CFM)
Contextoam ethcfm
Treeethcfm
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

cfm-stack-table

Description The cfm-stack-table provides an overview of CFM MEP state in a single view
Contextoam ethcfm cfm-stack-table
Treecfm-stack-table
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
interface
Description Enter the interface context
Context oam ethcfm cfm-stack-table interface
Treeinterface
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
interface interface string level number direction keyword
Description List of interfaces that have CFM configured and the association CFM operational state
Contextoam ethcfm cfm-stack-table interface interface interface string level number direction keyword
Treeinterface
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
direction keyword
Description

The direction the MEP faces

If 'down' the MEP sends CFM PDUs away from the MAC Relay Entity. If 'up' the MEP sends CFM PDUs towards the MAC Relay Entity.

Contextoam ethcfm cfm-stack-table interface interface interface string level number direction keyword
Options

  • down

  • up

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
subinterface
Description Enter the subinterface context
Context oam ethcfm cfm-stack-table subinterface
Treesubinterface
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
subinterface subinterface string primary-vlan (number | keyword) level number direction keyword
Description List of subinterfaces that have CFM configured and the association CFM operational state
Contextoam ethcfm cfm-stack-table subinterface subinterface subinterface string primary-vlan (number | keyword) level number direction keyword
Treesubinterface
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
direction keyword
Description

The direction the MEP faces

If 'down' the MEP sends CFM PDUs away from the MAC Relay Entity. If 'up' the MEP sends CFM PDUs towards the MAC Relay Entity.

Contextoam ethcfm cfm-stack-table subinterface subinterface subinterface string primary-vlan (number | keyword) level number direction keyword
Options

  • down

  • up

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

domain domain-id string

Description

Maintenance Domain list

The Maintenance Domain includes all the configuration elements to define the individual domain behavior and scope of the CFM boundary. These are common elements that will be part of the related Maintenance Associations configured within the domain.

Contextoam ethcfm domain domain-id string
Treedomain
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
Max. Elements4000
domain-id string
Description Unique Maintenance Domain identifier
Context oam ethcfm domain domain-id string
String Length1 to 64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
association association-id string
Description Maintenance Association list
Context oam ethcfm domain domain-id string association association-id string
Treeassociation
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
Max. Elements4000
association-id string
Description Unique Maintenance Association identifier
Contextoam ethcfm domain domain-id string association association-id string
String Length1 to 64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
association-auto-discovered-meps mep-id number
Description Add a list entry for association-auto-discovered-meps
Contextoam ethcfm domain domain-id string association association-id string association-auto-discovered-meps mep-id number
Treeassociation-auto-discovered-meps
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
mep-id number
Description

A list of the MEP IDs added to the MA by auto discovery

An auto-discovered remote MEP ID can be added to the association-mep list though configuration. Once added to the association-mep list it is removed from the auto-discovered MEP list.

Contextoam ethcfm domain domain-id string association association-id string association-auto-discovered-meps mep-id number
Range1 to 8191
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
association-meps mep-id number
Description Add a list entry for association-meps
Contextoam ethcfm domain domain-id string association association-id string association-meps mep-id number
Treeassociation-meps
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ccm-hold-time
Description Enter the ccm-hold-time context
Context oam ethcfm domain domain-id string association association-id string ccm-hold-time
Treeccm-hold-time
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
delay-timeout number
Description

Additional time before a MEP declares a fault for peer CCM timeout conditions

Each unit (centisecond) is the equivalent to 10ms, or one hundredth of a second in additional time added before the recognition of a peer time-out. This is applicable to MEPs with a CCM-interval 100ms and below. A value 0 means there is no additive delay

Contextoam ethcfm domain domain-id string association association-id string ccm-hold-time delay-timeout number
Treedelay-timeout
Range0 to 1000
Default0
Unitscentiseconds
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ma-name
Description Context for association name
Context oam ethcfm domain domain-id string association association-id string ma-name
Treema-name
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
id string
Description

VPN ID required when using association-format vpn-id

When the VPN OUI is less than 6 hex characters the configured value will be prepended with the appropriate number of zeros. When the VPN INDEX is less than 8 hex characters the configured value will be prepended with the appropriate number of zeros.

Contextoam ethcfm domain domain-id string association association-id string ma-name id string
Treeid
String Length3 to 15
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
mep mep-id reference
Description The list of Maintenance association End Points in a specific Maintance Association
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference
Treemep
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
continuity-check
Description This set of data definitions describes the handling of Ethernet Continuity Check (ETH-CCM)
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check
Treecontinuity-check
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ccm-local-fault
Description Enter the ccm local fault action context
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check ccm-local-fault
Treeccm-local-fault
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
action keyword
Description

Provides the ability to operationally affect the attachment where the down MEP is configured

A down MEP that experiences a defect condition matching the lowest-fault-priority defect can affect the operational state of the interface/subinterface the down MEP is configured on when the ccm-local-fault value is 'permit'. When the ccm-local-fault value is 'deny' there is no operational impact on the interface/subinterface. This leaf is only supported on down MEPs.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check ccm-local-fault action keyword
Treeaction
Defaultdeny
Options

  • permit

    Action taken

  • deny

    No action taken

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ccm-transmit keyword
Description

An indicator of whether the MEP is configured to transmit CCM packets

This only controls the MEPs ability to transmit CCM packets. A MEP has no administrative configuration to stop the processing of received CCM packets. The receive state machine for CCM will execute and packet processing will occur regardless of the ccm-transmit admin-state.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check ccm-transmit keyword
Treeccm-transmit
Defaultdisable
Options

  • enable

  • disable

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
highest-priority-defect-found keyword
Description

Value indicating the highest-priority defect present since the MEP FNG state machine was in RESET

Multiple defect conditions may be present on a local MEP at any given time. This leaf records the highest priority defect since the MEP Fault Notification Generator (FNG) State Machine was last in the FNG_RESET state. This will be cleared when the when no defect flags are present.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check highest-priority-defect-found keyword
Treehighest-priority-defect-found
Options

  • none

  • rdi-ccm

  • mac-status

  • remote-ccm

  • error-ccm

  • xcon-ccm

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
lowest-fault-priority-defect keyword
Description

The lowest priority defect that will generate a Fault Alarm

When the lowest fault priority defect is reached or exceeded, a fault alarm will be generated. This also drives the ../ccm-local-fault-action for down MEPs. When the lowest priority fault priority defect is reached the ../ccm-local-fault with a value 'permit' will operationally affect the interface or subinterface on which it is attached.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check lowest-fault-priority-defect keyword
Treelowest-fault-priority-defect
Defaultmac-remote-error-xcon
Options

  • all-def

  • mac-remote-error-xcon

  • remote-error-xcon

  • error-xcon

  • xcon

  • no-xcon

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sent-interface-status keyword
Description

Latest interface-status TLV value sent to the peer in the CCM packet

Indicates the interface status TLV information included in the most recent Connectivity Check Message (CCM) transmission from the local MEP. If the local MEP CCM transmissions are not enabled, or if no interface status TLV was included in the most recent transmission, then ccm-tx-if-status will return a value of is-no-interface-status-tlv (0).

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check sent-interface-status keyword
Treesent-interface-status
Options

  • no-status-tlv

    Indicates either that no CCM has been received or that no interface status TLV was present in the last CCM received

  • up

    The interface is ready to pass packets

  • down

    The interface cannot pass packets

  • testing

    The interface is in some test mode

  • unknown

    The interface status cannot be determined for some reason

  • dormant

    The interface is not in a state to pass packets but is in a pending state, waiting for some external event

  • not-present

    Some component of the interface is missing

  • lower-layer-down

    The interface is down due to state of the lower layer interface condition

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sent-port-status keyword
Description

Latest port-status TLV value sent to the peer in the CCM packet

Indicates the port status TLV information included in the most recent Connectivity Check Message (CCM) transmission from the local MEP. If the local MEP CCM transmissions are not enabled, or if no port status TLV was included in the most recent transmission, then ccm-tx-port-status will return a value of ps-no-port-state-tlv (0).

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check sent-port-status keyword
Treesent-port-status
Options

  • no-status-tlv

    Indicates either that no CCM has been received or that no port status TLV was present in the last CCM received

  • blocked

    Ordinary data cannot pass freely through the port on which the remote MEP resides

  • up

    Ordinary data can pass freely through the port on which the remote MEP resides

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sent-remote-defect-indicator boolean
Description

Latest remote defect indicator (rdi) value sent to the peer in the CCM packet

Indicates if the Remote Defect Indication (RDI) bit was set to on in the most recent Connectivity Check Message (CCM) transmission from the local MEP.

If the local MEP CCM transmissions are not enabled, or if the RDI bit was not set in the most recent transmission, then ccm-tx-rdi will return a value of 'false (2)'.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference continuity-check sent-remote-defect-indicator boolean
Treesent-remote-defect-indicator
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
direction keyword
Description

A value indicating the direction which the MEP faces on the interface/subinterface

For all but MAC-VRF subinterfaces, the direction of the MEP must be 'down'. The MAC-VRF is a bridging entity and therefore supports the direction 'up'. The other entities are not bridging and therefore cannot support the direction 'up'.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference direction keyword
Treedirection
Options

  • down

  • up

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
interface-ref
Description Enter the interface-ref context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference interface-ref
Treeinterface-ref
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
linktrace
Description Data definitions related to a linktrace test result
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace
Treelinktrace
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
latest-run
Description Enter the latest-run context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run
Treelatest-run
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
reply reply-order number
Description The list of LTRs associated with a specific Linktrace transaction
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
Max. Elements32
chassis-id-subtype (number | keyword)
Description Data definitions associated with the Sender ID TLV
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number chassis-id-subtype (number | keyword)
Treechassis-id-subtype
Range8 to 255
Options

  • CHASSIS_COMPONENT

    Chassis identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737

  • INTERFACE_ALIAS

    Chassis identifier based on the value of ifAlias object defined in IETF RFC 2863

  • PORT_COMPONENT

    Chassis identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737 for a port or backplane component

  • MAC_ADDRESS

    Chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001

  • NETWORK_ADDRESS

    Chassis identifier based on a network address, associated with a particular chassis. The encoded address is composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value

  • INTERFACE_NAME

    Chassis identifier based on the name of the interface, e.g., the value of ifName object defined in IETF RFC 2863

  • LOCAL

    Chassis identifier based on a locally defined value

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
egress-action keyword
Description

An enumerated value indicating the value returned n the Egress Action field

This leaf is not present if no value is returned in the LTR.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number egress-action keyword
Treeegress-action
Options

  • ok

    Indicates the target data frame would be passed through to the MAC Relay Entity

  • down

    Indicates the Bridge Ports MAC Operational parameter is false

  • blocked

    Indicates the target data frame would not be forwarded if received on this Port due to active topology enforcement

  • vid

    Indicates the ingress port is not in the member set of the LTMs VID, and ingress filtering is enabled

    This means the target data frame would be filtered by ingress filtering.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
egress-port-id
Description Enter the egress-port-id context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number egress-port-id
Treeegress-port-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
port-id-subtype keyword
Description

The Egress Port ID field and the corresponding port ID value

This leaf is not present if no value is returned in the LTR.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number egress-port-id port-id-subtype keyword
Treeport-id-subtype
Options

  • INTERFACE_ALIAS

    Chassis identifier based on the value of ifAlias object defined in IETF RFC 2863

  • PORT_COMPONENT

    Port identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737 for a port component

  • MAC_ADDRESS

    Port identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with a port

  • NETWORK_ADDRESS

    Port identifier based on a network address, associated with a particular port

  • INTERFACE_NAME

    Port identifier based on the name of the interface, e.g., the value of ifName object defined in IETF RFC 2863

  • AGENT_CIRCUIT_ID

    Port identifer based on the circuit id in the DHCP relay agent information option as defined in IETF RFC 3046

  • LOCAL

    Port identifier based on a locally defined alphanumeric string

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ingress-action keyword
Description

An enumerated value indicating the value returned in the Ingress Action field

This leaf is not present if no value is returned in the LTR.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number ingress-action keyword
Treeingress-action
Options

  • ok

    Indicates the target data frame would be passed through to the MAC Relay Entity

  • down

    Indicates the Bridge Ports MAC Operational parameter is false

  • blocked

    Indicates the target data frame would not be forwarded if received on this Port due to active topology enforcement

  • vid

    Indicates the ingress port is not in the member set of the LTMs VID, and ingress filtering is enabled

    This means the target data frame would be filtered by ingress filtering.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ingress-port-id
Description Enter the ingress-port-id context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number ingress-port-id
Treeingress-port-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
port-id-subtype keyword
Description

The Ingress Port ID field and the corresponding port ID value

This leaf is not present if no value is returned in the LTR.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number ingress-port-id port-id-subtype keyword
Treeport-id-subtype
Options

  • INTERFACE_ALIAS

    Chassis identifier based on the value of ifAlias object defined in IETF RFC 2863

  • PORT_COMPONENT

    Port identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737 for a port component

  • MAC_ADDRESS

    Port identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with a port

  • NETWORK_ADDRESS

    Port identifier based on a network address, associated with a particular port

  • INTERFACE_NAME

    Port identifier based on the name of the interface, e.g., the value of ifName object defined in IETF RFC 2863

  • AGENT_CIRCUIT_ID

    Port identifer based on the circuit id in the DHCP relay agent information option as defined in IETF RFC 3046

  • LOCAL

    Port identifier based on a locally defined alphanumeric string

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
last-egress-identifier
Description TLV included with in the LTM used to identify the instantiating or relaying management point
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number last-egress-identifier
Treelast-egress-identifier
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ltr-relay keyword
Description An enumerated value indicating the value returned in the Relay Action field
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number ltr-relay keyword
Treeltr-relay
Options

  • hit

    Indicates the LTM reached an MP whose MAC address matches the target MAC address

  • filtering-database

    Indicates the Egress Port was determined by consulting the Filtering Database

  • mip-ccm-database

    Indicates the Egress Port was determined by consulting the MIP CCM Database

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
next-egress-identifier
Description TLV included with in the LTM used to identify the instantiating or relaying management point
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run reply reply-order number next-egress-identifier
Treenext-egress-identifier
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
test-status keyword
Description

The status of the last test that was executed

A value of 'completed' means the test has run and ended without intervention, to completion. A value of 'terminated-incomplete' indicates the test started but conditions existed that caused if to terminate before the natural completion. A value 'in-progress' means the test is currently executing. A value of 'failed-to-start' meant a requirement to start the test was not met and the test had failed to start. When this value is set the statistics from a prior latest-run are deleted.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace latest-run test-status keyword
Treetest-status
Options

  • completed

  • terminated-incomplete

  • in-progress

  • failed-to-start

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
status keyword
Description

If an active linktrace test is executing from this MEP

Only a single Linktrace test can be active on a MEP at one time. When the status is 'active' the MEP has a linktrace session open. Another linktrace test form this MEP is not allowed. When the status is 'inactive' the MEP does not currently have a linktrace session open.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference linktrace status keyword
Treestatus
Options

  • active

  • inactive

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
loopback
Description Enter the loopback context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference loopback
Treeloopback
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
multicast-latest-run
Description Enter the multicast-latest-run context
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run
Treemulticast-latest-run
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
remote-mep-mac remote-mac-address string
Description Enter the remote-mep-mac list instance
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run remote-mep-mac remote-mac-address string
Treeremote-mep-mac
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sequence-number sequence-number number received-index number
Description Enter the sequence-number list instance
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run remote-mep-mac remote-mac-address string sequence-number sequence-number number received-index number
Treesequence-number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
received-index number
Description

Indicates the order in which the reply was received for the corresponding remote MAC address

This is a locally assigned index that can be used to detect out of order responses.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run remote-mep-mac remote-mac-address string sequence-number sequence-number number received-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Enter the statistics context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
test-status keyword
Description

The status of the last test that was executed

A value of 'completed' means the test has run and ended without intervention, to completion. A value of 'terminated-incomplete' indicates the test started but conditions existed that caused if to terminate before the natural completion. A value 'in-progress' means the test is currently executing. A value of 'failed-to-start' meant a requirement to start the test was not met and the test had failed to start. When this value is set the statistics from a prior latest-run are deleted.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback multicast-latest-run test-status keyword
Treetest-status
Options

  • completed

  • terminated-incomplete

  • in-progress

  • failed-to-start

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
status keyword
Description

If an active loopback test is executing from this MEP

Only a single loopback test can be active on a MEP at one time. When the status is 'active' the MEP has a loopback session open. Another loopback test form this MEP is not allowed. When the status is 'inactive' the MEP does not currently have a loopback session open.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback status keyword
Treestatus
Options

  • active

  • inactive

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
unicast-latest-run
Description Enter the unicast-latest-run context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference loopback unicast-latest-run
Treeunicast-latest-run
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Enter the statistics context
Context oam ethcfm domain domain-id string association association-id string mep mep-id reference loopback unicast-latest-run statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
test-status keyword
Description

The status of the last test that was executed

A value of 'completed' means the test has run and ended without intervention, to completion. A value of 'terminated-incomplete' indicates the test started but conditions existed that caused if to terminate before the natural completion. A value 'in-progress' means the test is currently executing. A value of 'failed-to-start' meant a requirement to start the test was not met and the test had failed to start. When this value is set the statistics from a prior latest-run are deleted.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference loopback unicast-latest-run test-status keyword
Treetest-status
Options

  • completed

  • terminated-incomplete

  • in-progress

  • failed-to-start

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
remote-mep remote-mep-id number
Description The list of remote MEPs in the MEP CCM database
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number
Treeremote-mep
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
auto-discovered boolean
Description

Indicates if the remote MEP has be auto-discovered 'true' indicates the remote MEP has been auto-discovered

Display the method by which the remote MEP has been added to the remote-mep database. When 'false' the remote MEP has been added by manual configuration. When 'true' the remote-mep has been added using the auto discovery method.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number auto-discovered boolean
Treeauto-discovered
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
chassis-id-subtype (number | keyword)
Description Data definitions associated with the Sender ID TLV
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number chassis-id-subtype (number | keyword)
Treechassis-id-subtype
Range8 to 255
Options

  • CHASSIS_COMPONENT

    Chassis identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737

  • INTERFACE_ALIAS

    Chassis identifier based on the value of ifAlias object defined in IETF RFC 2863

  • PORT_COMPONENT

    Chassis identifier based on the value of entPhysicalAlias object defined in IETF RFC 2737 for a port or backplane component

  • MAC_ADDRESS

    Chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001

  • NETWORK_ADDRESS

    Chassis identifier based on a network address, associated with a particular chassis. The encoded address is composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value

  • INTERFACE_NAME

    Chassis identifier based on the name of the interface, e.g., the value of ifName object defined in IETF RFC 2863

  • LOCAL

    Chassis identifier based on a locally defined value

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
interface-status-tlv keyword
Description The enumerated value from the Interface Status TLV from the last CCM received from the remote MEP
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number interface-status-tlv keyword
Treeinterface-status-tlv
Options

  • no-status-tlv

    Indicates either that no CCM has been received or that no interface status TLV was present in the last CCM received

  • up

    The interface is ready to pass packets

  • down

    The interface cannot pass packets

  • testing

    The interface is in some test mode

  • unknown

    The interface status cannot be determined for some reason

  • dormant

    The interface is not in a state to pass packets but is in a pending state, waiting for some external event

  • not-present

    Some component of the interface is missing

  • lower-layer-down

    The interface is down due to state of the lower layer interface condition

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
port-status-tlv keyword
Description The enumerated value from the Port Status TLV from the last CCM received from the remote MEP
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number port-status-tlv keyword
Treeport-status-tlv
Options

  • no-status-tlv

    Indicates either that no CCM has been received or that no port status TLV was present in the last CCM received

  • blocked

    Ordinary data cannot pass freely through the port on which the remote MEP resides

  • up

    Ordinary data can pass freely through the port on which the remote MEP resides

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
remote-defect-indicator boolean
Description

An indication of the state of the RDI bit in the last received CCM, 'true' for RDI set

The CCM message contains a flag to indicate if a MEP has detected a defect condition. When the RDI bit is set to 1 in the PDU that means the MEP is experiencing a defect condition and is including this in the transmitted CCM packets. When no defects are detected the RDI bit is set to 0 in the packet.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number remote-defect-indicator boolean
Treeremote-defect-indicator
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
remote-mep-failed-ok-time number
Description

The time at which the Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state

This type is based on the timeticks type defined in RFC 6991, but with 64-bit width. It represents the time, modulo 2^64, in hundredths of a second between two epochs.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number remote-mep-failed-ok-time number
Treeremote-mep-failed-ok-time
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
remote-mep-state keyword
Description An enumerated value indicating the operational state of the Remote MEP state machine
Contextoam ethcfm domain domain-id string association association-id string mep mep-id reference remote-mep remote-mep-id number remote-mep-state keyword
Treeremote-mep-state
Options

  • idle

    Indicates momentary state during reset

  • start

    Indicates the timer has not expired since the state machine was reset, and no valid CCM has yet been received

  • failed

    Indicates the timer has expired, both since the state machine was reset and since a valid CCM was received.

  • ok

    Indicates the timer has not expired since a valid CCM was received.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
network-instance
Description Enter the network-instance context
Context oam ethcfm domain domain-id string association association-id string network-instance
Treenetwork-instance
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
remote-mep-auto-discovery
Description This set of data definitions describes the auto discovery behavior for remote MEPs
Contextoam ethcfm domain domain-id string association association-id string remote-mep-auto-discovery
Treeremote-mep-auto-discovery
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
admin-state keyword
Description

Enable the ability to auto-discover remote MEPs within the Maintenance Association

When the admins-state is 'enable' unknown remote MEP peers which have the same Maintenance Association information will be automatically added to the remote-mep database and these unknown peer MEPS will not raise the defect error-ccm. When the admin-state is 'disable' unknown remote MEP peers will not automatically be added to the remote-mep database. Unknown MEPs will cause the defect error-ccm to be raised.

If the admin-state value is changed from 'enable' to 'disable' all previously learned MEPs for the Maintenance Association will be removed from the remote-mep database and auto-discovery will be disabled.

Contextoam ethcfm domain domain-id string association association-id string remote-mep-auto-discovery admin-state keyword
Treeadmin-state
Defaultdisable
Options

  • enable

  • disable

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
aging-timer (number | keyword)
Description

Optional time in seconds the peer MEP remains in the remote-mep database after defect remote-ccm

Peer MEPs added to the remote-mep database do not age out unless the optional aging-timer is configured. The aging-timer value is the additional time the remote peer MEP remains in the database since the recognition of the defect remote-ccm (peer timeout where no packets have arrived from the peer in 3.5 times the ccm-interval). A value of 'none' disables aging.

Contextoam ethcfm domain domain-id string association association-id string remote-mep-auto-discovery aging-timer (number | keyword)
Treeaging-timer
Range1 to 86400
Defaultnone
Unitsseconds
Options

  • none

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
domain-format keyword
Description Format of the md-name
Context oam ethcfm domain domain-id string domain-format keyword
Treedomain-format
Options

  • none

    No Maintenance Domain Name

  • dns-like

    Domain Name based string

  • mac-address

    MAC address

  • string

    Character string

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
level number
Description

Integer identifying the Maintenance Domain Level

Higher numbers correspond Maintenance Domains with the greatest physical reach. Lower numbers correspond to Maintenance Domains with more limited physical reach. CFM packets with higher levels will flow transparently across domains of lower level values.

Contextoam ethcfm domain domain-id string level number
Treelevel
Range0 to 7
Default0
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
md-name
Description Context for domain name
Context oam ethcfm domain domain-id string md-name
Treemd-name
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
dns string
Description DNS format sting required when using domain-format 'dns-like'
Contextoam ethcfm domain domain-id string md-name dns string
Treedns
String Length1 to 43
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
mac string
Description MAC address string required when using domain-format 'mac-address'
Contextoam ethcfm domain domain-id string md-name mac string
Treemac
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
name string
Description Name string required when using domain-format 'string'
Contextoam ethcfm domain domain-id string md-name name string
Treename
String Length1 to 43
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number

Description Enter the learned-remote-mac list instance
Contextoam ethcfm learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number
Treelearned-remote-mac
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
stale-flag boolean
Description

Indicates if the learned MAC entry for this remote MEP matches the entry found in the list on the local MEP

The value 'false' indicates that the MAC address matches the entry found in both the lists for the same local and remote MEP values and therefore is not considered stale.

The value 'true' indicates either the entries do not match, or there is no equivalent entry for the remote MEP in the list on the local MEP, so the learned remote MAC address in this table is considered stale.

Contextoam ethcfm learned-remote-mac domain-id string association-id string local-mep-id number remote-mep-id number stale-flag boolean
Treestale-flag
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

statistics

Description Enter the ETH-CFM system level statistics context
Contextoam ethcfm statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
error-discards number
Description

Indicates the number of discarded ETH-CFM packets received on the node

A packet may be discarded for several reasons including, but not limited to, malformed PDU, invalid TLVs, MEP admin down, etc.

Contextoam ethcfm statistics error-discards number
Treeerror-discards
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
receive-congestion-drops number
Description

Indicates the number of dropped ETH-CFM packets on the node in the receive direction

A packet drop can be caused be resource contention.

Contextoam ethcfm statistics receive-congestion-drops number
Treereceive-congestion-drops
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
receive-count number
Description Indicates the number of ETH-CFM packets received on the node
Contextoam ethcfm statistics receive-count number
Treereceive-count
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
transmit-congestion-drops number
Description

Indicates the number of dropped ETH-CFM packets on the node in the transmit direction

A packet drop can be caused be resource contention.

Contextoam ethcfm statistics transmit-congestion-drops number
Treetransmit-congestion-drops
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
transmit-count number
Description Indicates the number of ETH-CFM packets transmitted from the node
Contextoam ethcfm statistics transmit-count number
Treetransmit-count
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

ippm

Description Context for IP Performance Measurement shared elements
Contextoam ippm
Treeippm
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

source-udp-port-pools

Description Context for source UDP port allocation to IPPM application
Contextoam ippm source-udp-port-pools
Treesource-udp-port-pools
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
port port-number number
Description List of UDP ports
Context oam ippm source-udp-port-pools port port-number number
Treeport
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
port-number number
Description UDP port number
Context oam ippm source-udp-port-pools port port-number number
Range64374 to 64383
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
application-assignment keyword
Description IP Performance Measurement application assigned to the UDP port
Contextoam ippm source-udp-port-pools port port-number number application-assignment keyword
Treeapplication-assignment
Defaultunassigned
Options

  • oam-pm-ip

    Performance monitoring IP

  • link-measurement

    Link Measurement

  • unassigned

    No IPPM application assigned

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
in-use boolean
Description

Referenced by an application test

When false no test is referencing the UDP port. When true a test is referencing the UDP port. The application assignment can only be changed when the value is false.

Contextoam ippm source-udp-port-pools port port-number number in-use boolean
Treein-use
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

link-measurement

Description Context for Link Measurement
Context oam link-measurement
Treelink-measurement
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

interface name string

Description List of interface names
Context oam link-measurement interface name string
Treeinterface
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
name string
Description

The interface name

This can be configured in one of two forms. Fully qualified reference to an interface subinterface, example ethernet-1/1.1, or symbolic alias, example interface-1. When the fully qualified name is specified the 'interface-ref' should not be configured. When the symbolic alias is specified the 'interface-ref' must be configured.

Contextoam link-measurement interface name string
String Length1 to 255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
detectable-transmit-error keyword
Description

Detectable error interrupting Link Measurement tests

Packet transmission is prevented for the following detectable transmit errors; subinterface-down, invalid-dest-ip, invalid-subinterface-type, same-source-ip-destination-ip.

Contextoam link-measurement interface name string detectable-transmit-error keyword
Treedetectable-transmit-error
Options

  • none

  • subinterface-down

  • unexpected-error

  • no-route

  • source-ip-not-local

  • invalid-dest-ip

  • subinterface-type-not-supported

  • same-source-ip-destination-ip

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
dynamic-measurement
Description Context for Dynamic Measurement of IP interface
Contextoam link-measurement interface name string dynamic-measurement
Treedynamic-measurement
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
stamp
Description Context for STAMP IP protocol configuration
Contextoam link-measurement interface name string dynamic-measurement stamp
Treestamp
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ipv4
Description Context for ipv4 address configuration
Contextoam link-measurement interface name string dynamic-measurement stamp ipv4
Treeipv4
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
destination-ip string
Description

Unicast IPv4 destination address

When not specified and the primary local IP address has a prefix length of 30 or 31 the destination address will be the compliment. Otherwise, must be specified.

Contextoam link-measurement interface name string dynamic-measurement stamp ipv4 destination-ip string
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ipv6
Description Context for ipv6 address
Context oam link-measurement interface name string dynamic-measurement stamp ipv6
Treeipv6
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
interface-ref
Description

Reference to a subinterface

If interface-ref is configured the ../interface/name will be considered as an alias regardless of its form.

Contextoam link-measurement interface name string interface-ref
Treeinterface-ref
ConfigurableTrue
Platforms7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
interface reference
Description Reference to a base interface
Context oam link-measurement interface name string interface-ref interface reference
Treeinterface
Referenceinterface name string
ConfigurableTrue
Platforms7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
subinterface reference
Description

Reference to a subinterface

This requires the base interface to be specified using the interface leaf in this container.

Contextoam link-measurement interface name string interface-ref subinterface reference
Treesubinterface
Referenceinterface name string subinterface index number
ConfigurableTrue
Platforms7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
oper-state keyword
Description Operational state of link measurement on this interface
Contextoam link-measurement interface name string oper-state keyword
Treeoper-state
Options

  • up

    Component or process is operational

  • down

    Component or process is not operational

  • empty

    Component slot is empty

  • downloading

    Component is downloading image into memory

  • booting

    Component is booting downloaded image

  • starting

    Component image operational, application processes starting

  • failed

    Component or process has failed

  • synchronizing

    Component is currently being synchronized

  • upgrading

    Component is currently being upgraded

  • low-power

    Component is offline due to insufficient system power

  • degraded

    Component or process is in a degraded state

  • warm-reboot

    Component or process is currently warm rebooting

    This state is set during a warm reboot immediately following initiation of the reboot, continuing after startup until the system has completed audit. In this state the system will not accept configuration changes.

  • waiting

    Component or process is currently waiting

    This state can be set by event handler when the reinvoke-with-delay action is used, and indicates that the event handler is waiting for the provided delay before reinvoking the instance.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
operational-failure keyword
Description Reason(s) why this interface's link measurement is operationally disabled
Contextoam link-measurement interface name string operational-failure keyword
Treeoperational-failure
Options

  • no-protocol

  • template-admin-down

  • udp-port-unavailable

  • internal-error

  • subinterface-not-found-in-network-instance

  • network-instance-type-not-supported

  • subinterface-type-not-supported

  • no-template

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
report-timestamp string
Description

Time a threshold event was last reported to the routing engine

When ./last-reported-dynamic-delay > 0, report-timestamp holds the time at which ./last-reported-dynamic-delay was reported to the routing engine.

When ./last-reported-dynamic-delay = 0, report-timestamp holds the time at which ./last-reported-dynamic-delay was 'cleared' (because aging timer expired).

When ./last-reported-dynamic-delay = 'none', report-timestamp holds '1970-Jan-01 00:00:00.0' UTC as a placeholder representing a delay has not yet been reported to the routing engine.

Contextoam link-measurement interface name string report-timestamp string
Treereport-timestamp
String Length20 to 32
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
report-triggered-by keyword
Description Triggering event for the report
Context oam link-measurement interface name string report-triggered-by keyword
Treereport-triggered-by
Options

  • none

  • sample-threshold-absolute

  • sample-threshold-relative

  • aggregate-threshold-absolute

  • aggregate-threshold-relative

  • expired

  • reporting-disabled

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Aggregate sample window information and sample window statistics
Contextoam link-measurement interface name string statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
aggregate-sample-window
Description

Context for aggregate sample window statistics

Rolling buffer maintains the last 20 results.

Contextoam link-measurement interface name string statistics aggregate-sample-window
Treeaggregate-sample-window
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
index index number
Description The index list instance
Context oam link-measurement interface name string statistics aggregate-sample-window index index number
Treeindex
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
window-state keyword
Description Enter the window-state context
Context oam link-measurement interface name string statistics aggregate-sample-window index index number window-state keyword
Treewindow-state
Options

  • completed

    Window ran to completion

  • in-progress

    Window currently active

  • sw-reported

    Sample window threshold triggered report, aggregated sample window restarted

  • asw-reported

    Aggregate sample window threshold triggered report

  • terminated

    Window terminated prior to completion

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sample-window
Description

Context for sample window statistics

Rolling buffer maintains the last 50 results.

Contextoam link-measurement interface name string statistics sample-window
Treesample-window
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
index index number
Description Index list instance
Context oam link-measurement interface name string statistics sample-window index index number
Treeindex
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
window-state keyword
Description Enter the window-state context
Context oam link-measurement interface name string statistics sample-window index index number window-state keyword
Treewindow-state
Options

  • completed

    Window ran to completion

  • in-progress

    Window currently active

  • sw-reported

    Sample window threshold triggered report, aggregated sample window restarted

  • terminated

    Window terminated prior to completion

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

measurement-template template-name string

Description List of measurement templates
Context oam link-measurement measurement-template template-name string
Treemeasurement-template
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
Max. Elements255
template-name string
Description

Measurement template name

Modificaiton to bin-group attributes will cause associated tests to be terminated and restarted.

Contextoam link-measurement measurement-template template-name string
String Length1 to 255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
aggregate-sample-window
Description

Context for aggregate sample window

The aggregate sample window is a collection of sample windows. It executes threshold comparisons based on the results in each sample window.

Contextoam link-measurement measurement-template template-name string aggregate-sample-window
Treeaggregate-sample-window
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
threshold
Description Context for threshold configuration
Context oam link-measurement measurement-template template-name string aggregate-sample-window threshold
Treethreshold
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
last-reported-dynamic-delay-hold number
Description

Wait time to flush the last reported delay after operational change

This command configures the timer that specifies the wait time before the last reported delay measurement is flushed after a link measurement test enters the operationally down state.

When 0 the last reported delay is flushed immediately without delay.

Contextoam link-measurement measurement-template template-name string last-reported-dynamic-delay-hold number
Treelast-reported-dynamic-delay-hold
Range0 to 86400
Default86400
Unitsseconds
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
reporting boolean
Description

Report value reaching the threshold

When true threshold events are reported to the routing engine. When false threshold events are not reported to the routing engine

Contextoam link-measurement measurement-template template-name string reporting boolean
Treereporting
Defaulttrue
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sample-window
Description

Context for sample window

The sample window is a collection of individual test packet results. It executes threshold comparisons using the results in the sample window.

Contextoam link-measurement measurement-template template-name string sample-window
Treesample-window
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
threshold
Description Context for threshold configuration
Context oam link-measurement measurement-template template-name string sample-window threshold
Treethreshold
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
stamp
Description Context for STAMP options used by the measurement template
Contextoam link-measurement measurement-template template-name string stamp
Treestamp
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
dscp (number | keyword)
Description DSCP value
Context oam link-measurement measurement-template template-name string stamp dscp (number | keyword)
Treedscp
Range0 to 63
DefaultCS6
Options

  • CS0

  • LE

  • CS1

  • AF11

  • AF12

  • AF13

  • CS2

  • AF21

  • AF22

  • AF23

  • CS3

  • AF31

  • AF32

  • AF33

  • CS4

  • AF41

  • AF42

  • AF43

  • CS5

  • EF

  • CS6

  • CS7

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ipv6-destination-discovery
Description

Context for IPv6 destination discovery

Ping well-known multicast address ff02::2 (all routers) to solicit response from the peer. Use the source address in the response as the destination address in the STAMP test packets.

Contextoam link-measurement measurement-template template-name string stamp ipv6-destination-discovery
Treeipv6-destination-discovery
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
profile keyword
Description QoS profile for packet treatment in the local node
Contextoam link-measurement measurement-template template-name string stamp profile keyword
Treeprofile
Defaultin
Options

  • in

    The second level priority profile

  • out

    The lowest level priotity profile

  • exceed

    The third level priority profile

  • in-plus

    The highest priority profile

ConfigurableTrue
Platforms7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
return-path
Description Context for the STAMP return-path control
Contextoam link-measurement measurement-template template-name string stamp return-path
Treereturn-path
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
source-udp-port number
Description

Automatically allocate or statically configure the source UDP port

When 0 source UDP Port will automatically select an available source UDP port from the dynamic range. Configuring a specific value requires the UDP port to be assigned to the link-measurement application /oam ippm source-udp-port-pools port application-assignment.

Contextoam link-measurement measurement-template template-name string stamp source-udp-port number
Treesource-udp-port
Range0 | 64374 to 64383
Default0
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
unidirectional-measurement keyword
Description Method used to compute the forward unidirectional delay value
Contextoam link-measurement measurement-template template-name string unidirectional-measurement keyword
Treeunidirectional-measurement
Defaultderived
Options

  • derived

    Computes forward unidirectional measurement using round-trip divide by 2

  • actual

    Computes forward unidirectional measurements using (T2-T1)

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

lsp-ping

Description Container of last ping results for different MPLS and segment routing tunnels
Contextoam lsp-ping
Treelsp-ping
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

ldp

Description Container of LSP ping results for different LDP tunnels
Contextoam lsp-ping ldp
Treeldp
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
fec prefix (ipv4-prefix | ipv6-prefix)
Description Enter the fec list instance
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix)
Treefec
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the fec

This is the destination that was pinged.

Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix)
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
session-id id number
Description List of recent sessions (up to 10) with saved LSP ping results for the prefix
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
Max. Elements10
id number
Description The system-assigned session ID
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
path-destination
Description Enter the path-destination context
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
next-hop (ipv4-address | ipv6-address)
Description Egress IP next hop address used with path destination
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination next-hop (ipv4-address | ipv6-address)
Treenext-hop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sequence sequence-id number
Description List of probes sent during the test
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number
Treesequence
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sequence-id number
Description Sequence ID of the probe, starting with 1 and incrementing by 1
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
probe-size number
Description The size of the IP packet MPLS echo-request message. Probe size does not include MPLS headers, if any
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number probe-size number
Treeprobe-size
Range1 to 9500
Default64
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options

  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number send-failure-reason keyword
Treesend-failure-reason
Defaultno errors
Options

  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Summary statistics for the test
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
round-trip-time
Description Statistics for the round trip time, considering all the probes sent in the test
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics round-trip-time
Treeround-trip-time
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
test-active boolean
Description Indicates if the test is still running (true) or not (false)
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number test-active boolean
Treetest-active
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

sr-isis

Description Container of LSP ping results for different SR-ISIS tunnels
Contextoam lsp-ping sr-isis
Treesr-isis
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Description Enter the prefix-sid list instance
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Treeprefix-sid
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the SID

This is the destination that was pinged.

Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
session-id id number
Description List of recent sessions (up to 10) with saved LSP ping results for the prefix
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
Max. Elements10
id number
Description The system-assigned session ID
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
path-destination
Description Enter the path-destination context
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sequence sequence-id number
Description List of probes sent during the test
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number
Treesequence
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options

  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number sequence sequence-id number send-failure-reason keyword
Treesend-failure-reason
Defaultno errors
Options

  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Summary statistics for the test
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
round-trip-time
Description Statistics for the round trip time, considering all the probes sent in the test
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number statistics round-trip-time
Treeround-trip-time
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

te-policy

Description Parameters required to ping the endpoint of a TE-Policy tunnel
Contextoam lsp-ping te-policy
Treete-policy
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sr-uncolored
Description Enter the sr-uncolored context
Context oam lsp-ping te-policy sr-uncolored
Treesr-uncolored
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
policy policy-name string protocol-origin keyword
Description Enter the policy list instance
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword
Treepolicy
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
policy-name string
Description Name of Uncolored Traffic Engineering Policy to be tested. Any available primary or standby or active secondaty candidate-path can be probed.
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword
String Length1 to 255
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
protocol-origin keyword
Description Uncolored Traffic Engrineering Policy, origination source. The method Policy path is computed. This list includes Path Computation Engine, explicitly configured paths, etc.
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword
Options

  • pcep

    PCEP used as signalling mechanism for the candidate path

  • bgp

    BGP used as signalling mechanism for the candidate path

  • local

    Management interface used for candidate path instantiation

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
session-id id number
Description List of recent sessions (up to 10) with saved LSP ping results for the prefix
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
Max. Elements10
path-destination
Description Enter the path-destination context
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sequence sequence-id number
Description List of probes sent during the test
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number sequence sequence-id number
Treesequence
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number sequence sequence-id number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number sequence sequence-id number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options

  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number sequence sequence-id number send-failure-reason keyword
Treesend-failure-reason
Defaultno errors
Options

  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Summary statistics for the test
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
round-trip-time
Description Statistics for the round trip time, considering all the probes sent in the test
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number statistics round-trip-time
Treeround-trip-time
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

lsp-trace

Description Container of last trace results for different MPLS and segment routing tunnels
Contextoam lsp-trace
Treelsp-trace
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

ldp

Description Container of LSP trace results for different LDP tunnels
Contextoam lsp-trace ldp
Treeldp
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
fec prefix (ipv4-prefix | ipv6-prefix)
Description Enter the fec list instance
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix)
Treefec
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the fec

This is the destination that was traced.

Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix)
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
session-id id number
Description List of recent sessions (up to 10) with saved LSP trace results for the prefix
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
Max. Elements10
id number
Description The system-assigned session ID
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
hop hop-index number
Description List of hops traced
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number
Treehop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
hop-index number
Description The hop index, starting at minimum-mpls-ttl and incrementing by 1 up to maximum-mpls-ttl or until the destination is reached
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
probe probe-index number
Description Probes sent to a given hop
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number
Treeprobe
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
probe-index number
Description The probe index, probes received from a given hop. A given LSR may respond one than once, typically once with EgressRouter and once with Destination Router Match Label identifier
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
downstream-detailed-mapping id number
Description

List of DDMAP TLVs included in the echo-reply from this hop

The first one (with id 1) will be used by the sender.

Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number
Treedownstream-detailed-mapping
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
mpls-label index number
Description List of labels in the label stack that would have appeared if this router were forwarding the packet through this downstream interface
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number
Treempls-label
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
last-probe-send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number last-probe-send-failure-reason keyword
Treelast-probe-send-failure-reason
Defaultno errors
Options

  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options

  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
path-destination
Description Enter the path-destination context
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
next-hop (ipv4-address | ipv6-address)
Description Egress IP next hop address used with path destination
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination next-hop (ipv4-address | ipv6-address)
Treenext-hop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
test-active boolean
Description Indicates if the test is still running (true) or not (false)
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) session-id id number test-active boolean
Treetest-active
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

sr-isis

Description Container of LSP trace results for different SR-ISIS tunnels
Contextoam lsp-trace sr-isis
Treesr-isis
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Description Enter the prefix-sid list instance
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Treeprefix-sid
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the SID

This is the destination that was traced.

Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
session-id id number
Description List of recent sessions (up to 10) with saved LSP trace results for the prefix
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
Max. Elements10
id number
Description The system-assigned session ID
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
hop hop-index number
Description List of hops traced
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number
Treehop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
hop-index number
Description The hop index, starting at minimum-mpls-ttl and incrementing by 1 up to maximum-mpls-ttl or until the destination is reached
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
probe probe-index number
Description Probes sent to a given hop
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number
Treeprobe
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
probe-index number
Description The probe index, probes received from a given hop. A given LSR may respond one than once, typically once with EgressRouter and once with Destination Router Match Label identifier
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
downstream-detailed-mapping id number
Description

List of DDMAP TLVs included in the echo-reply from this hop

The first one (with id 1) will be used by the sender.

Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number
Treedownstream-detailed-mapping
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
mpls-label index number
Description List of labels in the label stack that would have appeared if this router were forwarding the packet through this downstream interface
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number
Treempls-label
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
last-probe-send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number last-probe-send-failure-reason keyword
Treelast-probe-send-failure-reason
Defaultno errors
Options

  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number hop hop-index number probe probe-index number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options

  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
path-destination
Description Enter the path-destination context
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

te-policy

Description Parameters required to trace the endpoint of a TE-Policy tunnel
Contextoam lsp-trace te-policy
Treete-policy
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
sr-uncolored
Description Enter the sr-uncolored context
Context oam lsp-trace te-policy sr-uncolored
Treesr-uncolored
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
policy policy-name string protocol-origin keyword
Description Enter the policy list instance
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword
Treepolicy
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
policy-name string
Description Name of Uncolored Traffic Engineering Policy which is to be traced. Any available primary or standby or active secondaty candidate-path can be traced.
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword
String Length1 to 255
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
protocol-origin keyword
Description Uncolored Traffic Engrineering Policy, origination source. The method Policy path is computed. This list includes Path Computation Engine, explicitly configured paths, etc.
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword
Options

  • pcep

    PCEP used as signalling mechanism for the candidate path

  • bgp

    BGP used as signalling mechanism for the candidate path

  • local

    Management interface used for candidate path instantiation

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
session-id id number
Description List of recent sessions (up to 10) with saved LSP trace results for the prefix
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number
Treesession-id
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
Max. Elements10
hop hop-index number
Description List of hops traced
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number
Treehop
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
probe probe-index number
Description Probes sent to a given hop
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number
Treeprobe
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
downstream-detailed-mapping id number
Description

List of DDMAP TLVs included in the echo-reply from this hop

The first one (with id 1) will be used by the sender.

Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number
Treedownstream-detailed-mapping
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
downstream-router-address (ipv4-address | ipv6-address)
Description The router ID or interface address of the next-hop router
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number downstream-router-address (ipv4-address | ipv6-address)
Treedownstream-router-address
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
mpls-label index number
Description List of labels in the label stack that would have appeared if this router were forwarding the packet through this downstream interface
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number downstream-detailed-mapping id number mpls-label index number
Treempls-label
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
last-probe-send-failure-reason keyword
Description Indicates the reason why the OAM manager could not send the request message
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number last-probe-send-failure-reason keyword
Treelast-probe-send-failure-reason
Defaultno errors
Options

  • timeout

  • source-ip-not-local

  • invalid-prefix

  • sr-prefix-is-local

  • ldp-prefix-is-local

  • invalid-dest-ip

  • dest-address-type-mismatch

  • next-hop-ip-not-found

  • next-hop-if-name-not-found

  • packet-size-too-big

  • far-end-unreachable

  • prefix-unknown

  • ds-map-not-supported

  • unexpected-error

  • no errors

Configurable False
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
reply
Description Details about the reply message for this sequence number or hop
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number reply
Treereply
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
return-code keyword
Description Return code value in the echo-reply
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number hop hop-index number probe probe-index number reply return-code keyword
Treereturn-code
Defaultno-return-code
Options

  • no-return-code

  • malformed-echo-request-received

  • one-or-more-tlvs-not-understood

  • replying-router-is-egress-for-fec-at-stack-depth-n

  • replying-router-has-no-mapping-for-fec-at-stack-depth-n

  • downstream-mapping-mismatch

  • upstream-interface-index-unknown

  • reserved

  • label-switched-at-stack-depth-n

  • label-switched-but-no-MPLS-at-stack-depth-n

  • fec-does-not-use-given-label-at-stack-depth-n

  • no-label-entry-at-stack-depth-n

  • protocol-unavailable-at-stack-depth-n

  • premature-termination

  • ddmap-tlv-has-return-code-subcode-details

  • label-switched-with-fec-change

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
path-destination
Description Enter the path-destination context
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword session-id id number path-destination
Treepath-destination
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

stamp

Description Enable the stamp context
Context oam stamp
Treestamp
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

session-reflector

Description STAMP Session-Reflector configuration and state
Contextoam stamp session-reflector
Treesession-reflector
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
inactivity-timer number
Description

STAMP test session timeout on inactivity

The amount of time (ref-wait) a test session must be inactive, no packets arriving, before the test session is removed from the Session-Reflector stateful table.

Contextoam stamp session-reflector inactivity-timer number
Treeinactivity-timer
Range1 to 604800
Default900
Unitsseconds
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
network-instance name reference
Description The list of network instances configured for STAMP Session-Reflector function
Contextoam stamp session-reflector network-instance name reference
Treenetwork-instance
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
admin-state keyword
Description This attribute specifies whether the STAMP Session-Reflector is enabled or disabled
Contextoam stamp session-reflector network-instance name reference admin-state keyword
Treeadmin-state
Defaultdisable
Options

  • enable

  • disable

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ip-prefix ip-prefix (ipv4-prefix | ipv6-prefix)
Description The list of IP source addresses or ranges allowed to send STAMP test packets to Session-Reflector
Contextoam stamp session-reflector network-instance name reference ip-prefix ip-prefix (ipv4-prefix | ipv6-prefix)
Treeip-prefix
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
ip-prefix (ipv4-prefix | ipv6-prefix)
Description The IP address or range allowed to send STAMP test packets to the Session-Reflector
Contextoam stamp session-reflector network-instance name reference ip-prefix ip-prefix (ipv4-prefix | ipv6-prefix)
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
oper-state keyword
Description Enter the oper-state context
Context oam stamp session-reflector network-instance name reference oper-state keyword
Treeoper-state
Options

  • up

    Component or process is operational

  • down

    Component or process is not operational

  • empty

    Component slot is empty

  • downloading

    Component is downloading image into memory

  • booting

    Component is booting downloaded image

  • starting

    Component image operational, application processes starting

  • failed

    Component or process has failed

  • synchronizing

    Component is currently being synchronized

  • upgrading

    Component is currently being upgraded

  • low-power

    Component is offline due to insufficient system power

  • degraded

    Component or process is in a degraded state

  • warm-reboot

    Component or process is currently warm rebooting

    This state is set during a warm reboot immediately following initiation of the reboot, continuing after startup until the system has completed audit. In this state the system will not accept configuration changes.

  • waiting

    Component or process is currently waiting

    This state can be set by event handler when the reinvoke-with-delay action is used, and indicates that the event handler is waiting for the provided delay before reinvoking the instance.

ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Enter the statistics context
Context oam stamp session-reflector network-instance name reference statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
malformed-packet number
Description

Session-Reflector was able to identify STAMP test packet but the packet was incorrectly formatted, packet discarded

This counter will be increased if the malformation affects the mapping of the test packet to the test session. This would be the case where the session cannot be identified.

Contextoam stamp session-reflector network-instance name reference statistics malformed-packet number
Treemalformed-packet
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
packet-discards-source-destination-equal number
Description

Session-Reflector discarded the received test packet because source IP and destination IP are the same

The test session is never created in the case where source IP and destination IP are the same.

Contextoam stamp session-reflector network-instance name reference statistics packet-discards-source-destination-equal number
Treepacket-discards-source-destination-equal
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number session-identifier number
Description The per test session statistics
Context oam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number session-identifier number
Treetest-session-statistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
session-reflector-ip (ipv4-address | ipv6-address)
Description The Destination IP address in the Session-Sender STAMP test packet, an IP on the Session-Reflector
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number session-identifier number
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
session-reflector-udp number
Description The Destination UDP address in the Session-Sender STAMP test packet, the listening port on the Session-Reflector
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number session-identifier number
Range0 to 65535
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
current-ref-wait number
Description The current value of the ref wait time for the test session
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number session-identifier number current-ref-wait number
Treecurrent-ref-wait
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
last-sequence-number-received number
Description The last sequence number received in the Session-Sender test packet
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number session-identifier number last-sequence-number-received number
Treelast-sequence-number-received
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
last-sequence-number-transmitted number
Description The last sequence number transmitted in the Session-Reflector test packet
Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number session-identifier number last-sequence-number-transmitted number
Treelast-sequence-number-transmitted
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
malformed-tlv number
Description

Session-Reflector was able to identify STAMP test packet but the packet was incorrectly formatted, packet discarded

This counter will be increased if the malformation does not affect the mapping of the test packet to the test session. This would be the case if a TLV is malformed.

Contextoam stamp session-reflector network-instance name reference test-session-statistics session-sender-ip (ipv4-address | ipv6-address) session-sender-udp number session-reflector-ip (ipv4-address | ipv6-address) session-reflector-udp number session-identifier number malformed-tlv number
Treemalformed-tlv
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
udp-port number
Description The UDP Port listening port of the STAMP Session-Reflector
Contextoam stamp session-reflector network-instance name reference udp-port number
Treeudp-port
Range862 | 64364 to 64373
Default862
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Enter the statistics context
Context oam stamp session-reflector statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b
session-reflector-not-found number
Description

Session-Sender is sending to a destination UDP port that is not part of the Session-Reflector

The Session-Reflector has not allocated the UDP port for this network instance reflector. This counter may increase when the Session-Reflector is deleted and packets for that specific Session-Reflector had been queued for processing. This counter does not increment when there is failure to map UDP port to the STAMP protocol.

Contextoam stamp session-reflector statistics session-reflector-not-found number
Treesession-reflector-not-found
Default0
ConfigurableFalse
Platforms7250 IXR-10, 7250 IXR-10e, 7250 IXR-6, 7250 IXR-6e, 7250 IXR-X3b

twamp

Description Enable the twamp context
Context oam twamp
Treetwamp
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b

server

Description Configuration of the TWAMP Server logical entity
Contextoam twamp server
Treeserver
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
network-instance name reference
Description Enter the network-instance list instance
Contextoam twamp server network-instance name reference
Treenetwork-instance
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
admin-state keyword
Description

TWAMP Server administrative state

A value 'enable' administratively starts the Server and Session-Reflector. A value 'disable' administratively stops the Server and Session-Reflector, dropping any active TWAMP-Control channels and terminating all TWAMP-Test sessions.

Contextoam twamp server network-instance name reference admin-state keyword
Treeadmin-state
Defaultdisable
Options

  • enable

  • disable

Configurable True
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
client-connection prefix (ipv4-prefix | ipv6-prefix)
Description List of TWAMP Client IP prefixes that can establish TWAMP-Control connections with the Server
Contextoam twamp server network-instance name reference client-connection prefix (ipv4-prefix | ipv6-prefix)
Treeclient-connection
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
prefix (ipv4-prefix | ipv6-prefix)
Description A TWAMP Client IP prefix the Server will accept TWAMP-Control connections from
Contextoam twamp server network-instance name reference client-connection prefix (ipv4-prefix | ipv6-prefix)
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Enter the statistics context
Context oam twamp server network-instance name reference client-connection prefix (ipv4-prefix | ipv6-prefix) statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number
Description List TWAMP-Control (TCP) connections
Context oam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number
Treecontrol-connection
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
selected-mode keyword
Description The TWAMP Mode chosen in the Mode field of the TWAMP Set-Up-Response message
Contextoam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number selected-mode keyword
Treeselected-mode
Options

  • unauthenticated

    No encryption or authentication is applied in TWAMP-Control and TWAMP-Test

  • authenticated

    Control-Client and Server pass a shared secret for authentication

  • encrypted

    Additional level of protection using encryption

  • unauth-test-encrypt-control

    Mixed Security Mode, the TWAMP-Test uses unauthenticated mode and TWAMP-Control uses encrypted mode

  • individual-session-control

    Individual TWAMP-Test sessions start and stop using individual session identifiers

    This allows TWAMP-Test sessions using the same control channel to be started individually instead of using the bulk all sessions start.

  • reflect-octets

    Reflect octets capability

  • symmetrical-size

    Symmetrical size for test packets between Session-Sender and Session-Reflector

ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
state keyword
Description Indicates the Server TWAMP-Control connection state
Contextoam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number state keyword
Treestate
Options

  • active

    TWAMP-Control connection between the Server and the Control-Client is active

    Packets are arriving on the TWAMP-Control channel or there are active TWAMP-Test sessions on the TWAMP-Control channel.

  • servwait

    TWAMP-Control connection between the Server and the Control-Client is in SERVWAIT

    This state is entered when no there are no TWAMP-Control messages between the Control-Client and Server and all test sessions on the TWAMP-Control channel have been stopped, and the REFWAIT (timeout following test session stop) has expired.

ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Enter the statistics context
Context oam twamp server network-instance name reference control-connection client-ip (ipv4-address | ipv6-address) client-tcp-port number server-ip (ipv4-address | ipv6-address) server-tcp-port number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
control-packet-dscp (number | keyword)
Description The DSCP to be placed in the IP header of TWAMP-Control (TCP) packets generated by the Server
Contextoam twamp server network-instance name reference control-packet-dscp (number | keyword)
Treecontrol-packet-dscp
Range0 to 63
DefaultCS7
Options

  • CS0

  • LE

  • CS1

  • AF11

  • AF12

  • AF13

  • CS2

  • AF21

  • AF22

  • AF23

  • CS3

  • AF31

  • AF32

  • AF33

  • CS4

  • AF41

  • AF42

  • AF43

  • CS5

  • EF

  • CS6

  • CS7

ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
enforce-test-session-start-time boolean
Description

Discard or process TWAMP-Test packets arriving before the negotiated session start time

A Request-TW-Session includes a start-time value for the test session. A value 'true' enforces the server check that will drop the TWAMP-Test packets if the test session start-time is before the Server time of day. In environments where the TWAMP Client and TWAMP Servers are not synchronized the value 'false' can be used to skip this validation check and process TWAMP test packets that arrive before their indicated start time.

Contextoam twamp server network-instance name reference enforce-test-session-start-time boolean
Treeenforce-test-session-start-time
Defaulttrue
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
modes keyword
Description The list of TWAMP Modes this Server supports
Contextoam twamp server network-instance name reference modes keyword
Treemodes
Options

  • unauthenticated

    No encryption or authentication is applied in TWAMP-Control and TWAMP-Test

  • authenticated

    Control-Client and Server pass a shared secret for authentication

  • encrypted

    Additional level of protection using encryption

  • unauth-test-encrypt-control

    Mixed Security Mode, the TWAMP-Test uses unauthenticated mode and TWAMP-Control uses encrypted mode

  • individual-session-control

    Individual TWAMP-Test sessions start and stop using individual session identifiers

    This allows TWAMP-Test sessions using the same control channel to be started individually instead of using the bulk all sessions start.

  • reflect-octets

    Reflect octets capability

  • symmetrical-size

    Symmetrical size for test packets between Session-Sender and Session-Reflector

ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
oper-state keyword
Description The operational state of the TWAMP Server and Session/Reflector
Contextoam twamp server network-instance name reference oper-state keyword
Treeoper-state
Options

  • up

    Component or process is operational

  • down

    Component or process is not operational

  • empty

    Component slot is empty

  • downloading

    Component is downloading image into memory

  • booting

    Component is booting downloaded image

  • starting

    Component image operational, application processes starting

  • failed

    Component or process has failed

  • synchronizing

    Component is currently being synchronized

  • upgrading

    Component is currently being upgraded

  • low-power

    Component is offline due to insufficient system power

  • degraded

    Component or process is in a degraded state

  • warm-reboot

    Component or process is currently warm rebooting

    This state is set during a warm reboot immediately following initiation of the reboot, continuing after startup until the system has completed audit. In this state the system will not accept configuration changes.

  • waiting

    Component or process is currently waiting

    This state can be set by event handler when the reinvoke-with-delay action is used, and indicates that the event handler is waiting for the provided delay before reinvoking the instance.

ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
servwait number
Description

TWAMP-Control (TCP) session timeout, in seconds

The length of time the Server maintains the TWAMP-Control channel in the absence of any activity for the channel. This state is entered when there is no TWAMP-Control messages between the Control-Client and Server, and all test sessions on the TWAMP-Control channel have been stopped, and the timeout following test session stop (REFWAIT) has expired.

Contextoam twamp server network-instance name reference servwait number
Treeservwait
Range60 to 3600
Default900
Unitsseconds
ConfigurableTrue
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
session-reflector
Description Configuration and state for the TWAMP Session-Reflector
Contextoam twamp server network-instance name reference session-reflector
Treesession-reflector
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number
Description TWAMP Session-Reflector test sessions.
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number
Treetest-session
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
last-sequence-number-received number
Description The last sequence number in the TWAMP-Test packet sent by the Session-Sender to the Session-Reflector for this test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number last-sequence-number-received number
Treelast-sequence-number-received
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
last-sequence-number-transmitted number
Description The last sequence number in the TWAMP-Test packet sent by the Session-Reflector to the Session-Sender for this test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number last-sequence-number-transmitted number
Treelast-sequence-number-transmitted
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
parent-connection-client-ip (ipv4-address | ipv6-address)
Description The IP address of the Control-Client used in the TWAMP-Control (TCP) packets belonging to this control connection which negotiated the test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number parent-connection-client-ip (ipv4-address | ipv6-address)
Treeparent-connection-client-ip
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
parent-connection-client-tcp-port number
Description The TCP port of the Control-Client used in the TWAMP-Control (TCP) packets belonging to this control connection which negotiated the test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number parent-connection-client-tcp-port number
Treeparent-connection-client-tcp-port
Range0 to 65535
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
parent-connection-server-ip (ipv4-address | ipv6-address)
Description The destination IP address in the TWAMP Control message sent by the Control-Client targeting the Server which negotiated this test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number parent-connection-server-ip (ipv4-address | ipv6-address)
Treeparent-connection-server-ip
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
parent-connection-server-tcp-port number
Description The destination TCP Port (862) in the TWAMP Control message sent by the Control-Client targeting the server which negotiated this test session
Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number parent-connection-server-tcp-port number
Treeparent-connection-server-tcp-port
Range0 to 65535
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Enter the statistics context
Context oam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
test-session-id string
Description

A TWAMP sever auto-allocated identifier for this TWAMP-Test session that is unique to the local Server

This value is communicated to the Control-Client requesting the test session using the SID field of the Accept-Session message.

Contextoam twamp server network-instance name reference session-reflector test-session sender-ip (ipv4-address | ipv6-address) sender-udp-port number reflector-ip (ipv4-address | ipv6-address) reflector-udp-port number test-session-id string
Treetest-session-id
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
statistics
Description Enter the statistics context
Context oam twamp server network-instance name reference statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b

statistics

Description Enter the statistics context
Context oam twamp statistics
Treestatistics
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
dropped-connection-states
Description The state of the TWAMP-Control channel when the failure occured
Contextoam twamp statistics dropped-connection-states
Treedropped-connection-states
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
dropped-connections
Description TWAMP-Control (TCP) dropped or closed connections
Contextoam twamp statistics dropped-connections
Treedropped-connections
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
dropped-test-packet
Description TWAMP-Test packet drop stats
Context oam twamp statistics dropped-test-packet
Treedropped-test-packet
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
arrived-before-start-time number
Description

Test packets dropped because they arrived before start time

The TWAMP-Test packets arrived on the Session-Reflector before the indicated start-time in the Request-TW-Session. This is likely caused by a difference in Time of Day (ToD) clocks used for timestaming the TWAMP-Test packet. This may occur when the Server/Session-Reflector clock is ahead of the ToD clock of the Control-Client/Session-Sender.

Contextoam twamp statistics dropped-test-packet arrived-before-start-time number
Treearrived-before-start-time
Default0
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b
rejected-session
Description Per reason code error statistics for test session rejection
Contextoam twamp statistics rejected-session
Treerejected-session
ConfigurableFalse
Platforms7250 IXR-10e, 7250 IXR-6e, 7250 IXR-X3b