acl
acl
+ acl-filter name string type keyword
+ description string
- embedded-entries
- entry sequence-id number
- action
- accept
- forward
- network-instance reference
- next-hop
- address (ipv4-address | ipv6-address)
- network-instance reference
- collect-stats boolean
- drop
- log boolean
- embedding-index reference
- nlri
- destination-port string
- destination-prefix string
- dscp string
- flow-label string
- fragment string
- icmp-code string
- icmp-type string
- icmpv6-code string
- icmpv6-type string
- ip-protocol string
- ipv6-destination-prefix string
- ipv6-source-prefix string
- packet-length string
- port string
- source-port string
- source-prefix string
- tcp-flags string
- upper-layer-protocol string
- source keyword
- statistics
- incomplete boolean
- last-clear string
- last-match string
- matched-packets number
- policer
- conforming-octets number
- conforming-packets number
- exceeding-octets number
- exceeding-packets number
- system-cpu-policer
- conforming-octets number
- conforming-packets number
- exceeding-octets number
- exceeding-packets number
- tcam-entries
- forwarding-complex complex-identifier string
- input-total number
- output-total number
- single-instance number
+ embedding index number
+ bgp-flowspec
+ group number
+ network-instance reference
- candidate-entries number
+ offset number
- oper-state keyword
- oper-state-reasons keyword
- programmed number
+ range number
+ subscriber-management
+ entry sequence-id number
+ action
+ accept
+ rate-limit
+ policer reference
+ system-cpu-policer reference
+ copy
+ drop
+ log boolean
+ reject
+ v4-message-type keyword
+ v6-message-type keyword
+ description string
- last-clear string
+ match
+ ipv4
+ destination-ip
+ address string
+ mask string
+ prefix string
+ prefix-list name reference
+ dscp-set (number | keyword)
+ first-fragment boolean
+ fragment boolean
+ icmp
+ code number
+ type (number | keyword)
+ protocol (number | keyword)
+ source-ip
+ address string
+ mask string
+ prefix string
+ prefix-list name reference
+ ipv6
+ destination-ip
+ address string
+ mask string
+ prefix string
+ prefix-list name reference
+ dscp-set (number | keyword)
+ icmp6
+ code number
+ type (number | keyword)
+ next-header (number | keyword)
+ source-ip
+ address string
+ mask string
+ prefix string
+ prefix-list name reference
+ l2
+ destination-mac
+ address string
+ mask string
+ ethertype (string | keyword)
+ source-mac
+ address string
+ mask string
+ vlan
+ outermost-vlan-id
+ none
+ operator keyword
+ range
+ end number
+ start number
+ value number
+ transport
+ destination-port
+ operator keyword
+ port-list name reference
+ range
+ end (number | keyword)
+ start (number | keyword)
+ value (number | keyword)
+ source-port
+ operator keyword
+ port-list name reference
+ range
+ end (number | keyword)
+ start (number | keyword)
+ value (number | keyword)
+ tcp-flags string
- statistics
- incomplete boolean
- last-clear string
- last-match string
- matched-packets number
- policer
- conforming-octets number
- conforming-packets number
- exceeding-octets number
- exceeding-packets number
- system-cpu-policer
- conforming-octets number
- conforming-packets number
- exceeding-octets number
- exceeding-packets number
- tcam-entries
- forwarding-complex complex-identifier string
- input-total number
- output-total number
- single-instance number
- last-clear string
- statistics
+ statistics-per-entry boolean
+ subinterface-specific keyword
- datapath-programming
- forwarding-complex slot-id number complex-id number
- last-completed-timestamp string
- programming-complete boolean
+ egress-mac-filtering boolean
+ interface interface-id string
+ input
+ acl-filter name reference type reference
- entry sequence-id reference
- policer
- conforming-octets number
- conforming-packets number
- exceeding-octets number
- exceeding-packets number
- statistics
- incomplete boolean
- last-clear string
- last-match string
- matched-packets number
- statistics
- statistics
- last-clear string
- policer
- conforming-octets number
- conforming-packets number
- exceeding-octets number
- exceeding-packets number
+ interface-ref
+ interface reference
+ subinterface reference
+ output
+ acl-filter name reference type reference
- entry sequence-id reference
- policer
- conforming-octets number
- conforming-packets number
- exceeding-octets number
- exceeding-packets number
- statistics
- incomplete boolean
- last-clear string
- last-match string
- matched-packets number
- statistics
- statistics
- last-clear string
- policer
- conforming-octets number
- conforming-packets number
- exceeding-octets number
- exceeding-packets number
+ ipv4-tcam-action-profile keyword
+ match-list
+ ipv4-prefix-list name string
+ apply-path index number
+ network-instance
+ match reference
+ match-pattern string
+ source
+ interface string
+ protocol
+ bgp
+ group string
+ neighbor string
+ description string
+ prefix ipv4-prefix string
+ ipv6-prefix-list name string
+ apply-path index number
+ network-instance
+ match reference
+ match-pattern string
+ source
+ interface string
+ protocol
+ bgp
+ group string
+ neighbor string
+ description string
+ prefix ipv6-prefix string
+ port-list name string
+ description string
+ port id number
+ range
+ end (number | keyword)
+ start (number | keyword)
+ value (number | keyword)
+ policers
+ policer name string
+ entry-specific boolean
+ maximum-burst-packet number
+ maximum-burst-size number
+ peak-rate-kbps number
+ peak-rate-pps number
+ scope keyword
- statistics
- aggregate
- conforming-octets number
- conforming-packets number
- exceeding-octets number
- exceeding-packets number
- last-clear string
+ system-cpu-policer name string
+ entry-specific boolean
+ maximum-burst-packet number
+ peak-rate-pps number
- statistics
- conforming-octets number
- conforming-packets number
- exceeding-octets number
- exceeding-packets number
- last-clear string
acl Descriptions
acl
acl-filter name string type keyword
| Description | List of MAC, IPv4, IPv6 filter policies | |
| Context | acl acl-filter name string type keyword | |
| Tree | acl-filter | |
| Configurable | True | |
| Platforms | Supported on all platforms |
name string
| Description | ACL Filter policy name | |
| Context | acl acl-filter name string type keyword | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
type keyword
| Description | Defines the type of ACL filter: ipv4: IPv4 ACL filter ipv6: IPv6 ACL filter mac: MAC ACL filter mixed: mixed layer-2/layer-3 filter used for QoS handling of system generated traffic | |
| Context | acl acl-filter name string type keyword | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
description string
| Description | Description string for the filter policy | |
| Context | acl acl-filter name string type keyword description string | |
| Tree | description | |
| String Length | 1 to 4096 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
embedded-entries
| Description | Enter the embedded-entries context Operational rows programmed from embed sources, separate from the static entry list | |
| Context | acl acl-filter name string type keyword embedded-entries | |
| Tree | embedded-entries | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
entry sequence-id number
| Description | One dynamically programmed ACL row for this filter | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number | |
| Tree | entry | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
sequence-id number
| Description | Sequence-id of this embedded entry within the filter | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number | |
| Range | 0 to 65535 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
action
| Description | Enter the action context Action programmed in hardware for this embedded entry | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number action | |
| Tree | action | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
accept
| Description | Enter the accept context Accept matching packets and forward them towards their normal destination, optionally redirected | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number action accept | |
| Tree | accept | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
forward
| Description | Enter the forward context Populated only when BGP requested redirection to a next hop or a routing context; omitted for a plain accept. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number action accept forward | |
| Tree | forward | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
network-instance reference
| Description | Routing context resolved from the virtual-router identifier received from BGP | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number action accept forward network-instance reference | |
| Tree | network-instance | |
| Reference | network-instance name string | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
next-hop
| Description | Enter the next-hop context | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number action accept forward next-hop | |
| Tree | next-hop | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
address (ipv4-address | ipv6-address)
| Description | IP address of the next hop received from BGP | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number action accept forward next-hop address (ipv4-address | ipv6-address) | |
| Tree | address | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
network-instance reference
| Description | Routing context resolved from the virtual-router identifier received from BGP alongside the next hop. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number action accept forward next-hop network-instance reference | |
| Tree | network-instance | |
| Reference | network-instance name string | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
collect-stats boolean
| Description | Whether statistics are collected for packets matching this entry | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number action collect-stats boolean | |
| Tree | collect-stats | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
drop
| Description | Enter the drop context Drop matching packets | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number action drop | |
| Tree | drop | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
log boolean
| Description | Whether packets matching this entry are logged | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number action log boolean | |
| Tree | log | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
embedding-index reference
| Description | Embedding binding that programmed this row References the embedding index whose offset and range cover this sequence-id, identifying which embed source produced this entry and, transitively, its network-instance and group. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number embedding-index reference | |
| Tree | embedding-index | |
| Reference | acl acl-filter name string type keyword embedding index number | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
nlri
| Description | Enter the nlri context BGP FlowSpec NLRI components for this embedded entry Operator-notation strings (for example '[ >= 100 ] and [ <200 ]') that allow an operator or a controller such as Deepfield to correlate a generated FlowSpec rule to this filter row and its statistics. Populated only when source is bgp-flowspec. Components that do not apply to the acl-filter type or are absent from the route are omitted. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri | |
| Tree | nlri | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
destination-port string
| Description | FlowSpec destination-port component | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri destination-port string | |
| Tree | destination-port | |
| String Length | 1 to 128 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
destination-prefix string
| Description | FlowSpec destination-prefix component (IPv4 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri destination-prefix string | |
| Tree | destination-prefix | |
| String Length | 1 to 24 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
dscp string
| Description | FlowSpec DSCP component List of the matched DSCP values in ascending order, for example '[ 10 12 ]'. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri dscp string | |
| Tree | dscp | |
| String Length | 1 to 185 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
flow-label string
| Description | FlowSpec flow-label component (IPv6 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri flow-label string | |
| Tree | flow-label | |
| String Length | 1 to 24 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
fragment string
| Description | FlowSpec fragment component (IPv4 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri fragment string | |
| Tree | fragment | |
| String Length | 1 to 128 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
icmp-code string
| Description | FlowSpec ICMP-code component (IPv4 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri icmp-code string | |
| Tree | icmp-code | |
| String Length | 1 to 24 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
icmp-type string
| Description | FlowSpec ICMP-type component (IPv4 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri icmp-type string | |
| Tree | icmp-type | |
| String Length | 1 to 24 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
icmpv6-code string
| Description | FlowSpec ICMPv6-code component (IPv6 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri icmpv6-code string | |
| Tree | icmpv6-code | |
| String Length | 1 to 24 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
icmpv6-type string
| Description | FlowSpec ICMPv6-type component (IPv6 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri icmpv6-type string | |
| Tree | icmpv6-type | |
| String Length | 1 to 24 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
ip-protocol string
| Description | FlowSpec IP-protocol component (IPv4 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri ip-protocol string | |
| Tree | ip-protocol | |
| String Length | 1 to 24 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
ipv6-destination-prefix string
| Description | FlowSpec destination-prefix component (IPv6 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri ipv6-destination-prefix string | |
| Tree | ipv6-destination-prefix | |
| String Length | 1 to 64 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
ipv6-source-prefix string
| Description | FlowSpec source-prefix component (IPv6 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri ipv6-source-prefix string | |
| Tree | ipv6-source-prefix | |
| String Length | 1 to 64 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
packet-length string
| Description | FlowSpec packet-length component | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri packet-length string | |
| Tree | packet-length | |
| String Length | 1 to 128 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
port string
| Description | FlowSpec port component | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri port string | |
| Tree | port | |
| String Length | 1 to 128 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
source-port string
| Description | FlowSpec source-port component | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri source-port string | |
| Tree | source-port | |
| String Length | 1 to 128 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
source-prefix string
| Description | FlowSpec source-prefix component (IPv4 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri source-prefix string | |
| Tree | source-prefix | |
| String Length | 1 to 24 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
tcp-flags string
| Description | FlowSpec TCP-flags component | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri tcp-flags string | |
| Tree | tcp-flags | |
| String Length | 1 to 128 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
upper-layer-protocol string
| Description | FlowSpec upper-layer-protocol component (IPv6 acl-filter) | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number nlri upper-layer-protocol string | |
| Tree | upper-layer-protocol | |
| String Length | 1 to 24 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
source keyword
| Description | Which embed source programmed this row (e.g. bgp-flowspec) CLI may display an operational alias such as bgp-fs. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number source keyword | |
| Tree | source | |
| Options |
| |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
statistics
| Description | Enter the statistics context Container for per-entry statistics | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
incomplete boolean
| Description | Returns true when at least one linecard had insufficient stats resources to ensure an accurate set of values for the number of matched packets, or when not all forwarding complexes reported their counts after control plane switchover. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics incomplete boolean | |
| Tree | incomplete | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
last-clear string
| Description | Time of the last clear command performed by the user at this level or a higher level | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
last-match string
| Description | The elapsed time since a packet last matched the entry, considering the mgmt0 subinterface and all subinterfaces of all linecard ports that use the ACL as an input ACL | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics last-match string | |
| Tree | last-match | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
matched-packets number
| Description | The number of packets matching the entry since it was programmed or since the last clear, considering the mgmt0 subinterface and all subinterfaces of all linecard ports that use the ACL as an input ACL | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics matched-packets number | |
| Tree | matched-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
policer
| Description | Enter the policer context Policer stats for traffic matching the entry: Statistics for policer configured with scope=global and entry-specific=true, and acl configured with subinterface-specific=false. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics policer | |
| Tree | policer | |
| Configurable | False | |
| Platforms | Supported on all platforms |
conforming-octets number
| Description | The number of bytes that were considered conforming by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics policer conforming-octets number | |
| Tree | conforming-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
conforming-packets number
| Description | The number of packets (actually Ethernet frames) that were considered conforming by the policer | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics policer conforming-packets number | |
| Tree | conforming-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
exceeding-octets number
| Description | The number of bytes that were considered exceeding by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics policer exceeding-octets number | |
| Tree | exceeding-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
exceeding-packets number
| Description | The number of packets (actually Ethernet frames) that were considered exceeding by the policer | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics policer exceeding-packets number | |
| Tree | exceeding-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
system-cpu-policer
| Description | Enter the system-cpu-policer context System CPU policer stats for traffic matching the entry: Statistics for system cpu policer configured with scope=global and entry-specific=true, and acl configured with subinterface-specific=false. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics system-cpu-policer | |
| Tree | system-cpu-policer | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-octets number
| Description | The number of bytes that were considered conforming by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics system-cpu-policer conforming-octets number | |
| Tree | conforming-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-packets number
| Description | The number of packets (actually Ethernet frames) that were considered conforming by the policer | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics system-cpu-policer conforming-packets number | |
| Tree | conforming-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-octets number
| Description | The number of bytes that were considered exceeding by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics system-cpu-policer exceeding-octets number | |
| Tree | exceeding-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-packets number
| Description | The number of packets (actually Ethernet frames) that were considered exceeding by the policer | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number statistics system-cpu-policer exceeding-packets number | |
| Tree | exceeding-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
tcam-entries
| Description | Enter the tcam-entries context Information about the TCAM entries used to implement the ACL entry | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number tcam-entries | |
| Tree | tcam-entries | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
forwarding-complex complex-identifier string
| Description | List of forwarding complexes in the system | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number tcam-entries forwarding-complex complex-identifier string | |
| Tree | forwarding-complex | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
complex-identifier string
| Description | A forwarding complex in the format (slot-number,complex-number). | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number tcam-entries forwarding-complex complex-identifier string | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
input-total number
| Description | The number of TCAM entries required to implement this entry on all subinterfaces of this complex where the filter is applied to ingress traffic. For example, if a single-instance of the entry takes 2 TCAM entries and the filter is an output-only subinterface-specific filter and the filter is applied to 5 subinterfaces on output and to 5 subinterfaces on input then input-total=2. If the entry is not applied to ingress traffic on any subinterfaces of this complex then input-total=0. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number tcam-entries forwarding-complex complex-identifier string input-total number | |
| Tree | input-total | |
| Configurable | False | |
| Platforms | Supported on all platforms |
output-total number
| Description | The number of TCAM entries required to implement this entry on all subinterfaces of this complex where the filter is applied to egress traffic. For example, if a single-instance of the entry takes 2 TCAM entries and the filter is an output-only subinterface-specific filter and the filter is applied to 5 subinterfaces on output and to 5 subinterfaces on input then output-total=10. If the entry is not applied to egress traffic on any subinterfaces of this complex then output-total=0. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number tcam-entries forwarding-complex complex-identifier string output-total number | |
| Tree | output-total | |
| Configurable | False | |
| Platforms | Supported on all platforms |
single-instance number
| Description | The number of TCAM entries required to implement this entry if it is applied to only one subinterface and one traffic direction specific to this slot. This is non-zero even if the filter is not applied to any subinterfaces of this complex. It captures the effect of TCAM entry expansion to deal with L4 port or VLAN ranges, for example. | |
| Context | acl acl-filter name string type keyword embedded-entries entry sequence-id number tcam-entries forwarding-complex complex-identifier string single-instance number | |
| Tree | single-instance | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
embedding index number
| Description | Per-source embed configuration Multiple embedding instances are allowed. Non-overlapping offset and range vs static entries and other embed instances is enforced by the ACL manager. | |
| Context | acl acl-filter name string type keyword embedding index number | |
| Tree | embedding | |
| Configurable | True | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
index number
bgp-flowspec
| Description | Enter the bgp-flowspec context | |
| Context | acl acl-filter name string type keyword embedding index number bgp-flowspec | |
| Tree | bgp-flowspec | |
| Configurable | True | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
group number
| Description | Interface-set extended-community group-id filter When non-zero, only Flowspec routes carrying this interface-set group-id are embedded. Zero disables group filtering for this source. | |
| Context | acl acl-filter name string type keyword embedding index number bgp-flowspec group number | |
| Tree | group | |
| Range | 0 to 65535 | |
| Default | 0 | |
| Configurable | True | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
network-instance reference
| Description | Network-instance from which Flowspec rules for this embed source are taken (mandatory) | |
| Context | acl acl-filter name string type keyword embedding index number bgp-flowspec network-instance reference | |
| Tree | network-instance | |
| Reference | network-instance name string | |
| Configurable | True | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
candidate-entries number
| Description | Number of dynamic entries this source presented to the filter for embedding, after any network-instance flowspec cap. May exceed range: entries beyond range cannot be embedded and are reported in oper-state-reasons as range-exceeded. | |
| Context | acl acl-filter name string type keyword embedding index number candidate-entries number | |
| Tree | candidate-entries | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
offset number
oper-state keyword
| Description | Operational state of this embed source on the filter up when every candidate entry is programmed and the filter is applied. degraded when programmed is greater than zero and the candidate set is not fully programmed (TCAM and/or range). down when programmed is zero, the filter is not applied, or the embed source is unavailable. oper-state-reasons is present when down or degraded. | |
| Context | acl acl-filter name string type keyword embedding index number oper-state keyword | |
| Tree | oper-state | |
| Options |
| |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
oper-state-reasons keyword
| Description | Reasons this embed source is down or degraded Absent when oper-state is up. Multiple values may be present together. | |
| Context | acl acl-filter name string type keyword embedding index number oper-state-reasons keyword | |
| Tree | oper-state-reasons | |
| Options |
| |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
programmed number
| Description | Number of dynamic entries from this source successfully embedded and programmed into hardware. This count never exceeds candidate-entries or range. | |
| Context | acl acl-filter name string type keyword embedding index number programmed number | |
| Tree | programmed | |
| Configurable | False | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
range number
| Description | Maximum embedded entries for this source Occupies sequence-ids offset through offset plus range minus one; must not overlap static entries or other embed sources. | |
| Context | acl acl-filter name string type keyword embedding index number range number | |
| Tree | range | |
| Range | 1 to 65536 | |
| Configurable | True | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
subscriber-management
| Description | Enter the subscriber-management context Marks this embedding as the insertion point for dynamic subscriber management filter entries. The parent ACL filter must have owner subscriber-management. | |
| Context | acl acl-filter name string type keyword embedding index number subscriber-management | |
| Tree | subscriber-management | |
| Configurable | True | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
entry sequence-id number
| Description | List of ACL entries comprising an ACL Filter | |
| Context | acl acl-filter name string type keyword entry sequence-id number | |
| Tree | entry | |
| Configurable | True | |
| Platforms | Supported on all platforms |
sequence-id number
| Description | A number to indicate the relative evaluation order of the different entries; lower numbered entries are evaluated before higher numbered entries | |
| Context | acl acl-filter name string type keyword entry sequence-id number | |
| Range | 0 to 65535 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
action
| Description | Enter the action context Container for the actions to be applied to packets matching the filter entry. | |
| Context | acl acl-filter name string type keyword entry sequence-id number action | |
| Tree | action | |
| Configurable | True | |
| Platforms | Supported on all platforms |
accept
| Description | Accept matching packets and forward them towards their normal destination | |
| Context | acl acl-filter name string type keyword entry sequence-id number action accept | |
| Tree | accept | |
| Configurable | True | |
| Platforms | Supported on all platforms |
rate-limit
| Description | Enter the rate-limit context Rate-limit accepted packets | |
| Context | acl acl-filter name string type keyword entry sequence-id number action accept rate-limit | |
| Tree | rate-limit | |
| Configurable | True | |
| Platforms | Supported on all platforms |
policer reference
| Description | Reference to a policer | |
| Context | acl acl-filter name string type keyword entry sequence-id number action accept rate-limit policer reference | |
| Tree | policer | |
| Reference | acl policers policer name | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
system-cpu-policer reference
| Description | Reference to a system-cpu-policer. | |
| Context | acl acl-filter name string type keyword entry sequence-id number action accept rate-limit system-cpu-policer reference | |
| Tree | system-cpu-policer | |
| Reference | acl policers system-cpu-policer name | |
| Configurable | True | |
| Platforms | Supported on all platforms |
copy
| Description | Create a copy of matching packets extract them to the CPM and deliver them to the designated veth interface | |
| Context | acl acl-filter name string type keyword entry sequence-id number action copy | |
| Tree | copy | |
| Configurable | True | |
| Platforms | Supported on all platforms |
drop
| Description | Drop matching packets. Dropped IP packets do not result in sending ICMP messages back to the source | |
| Context | acl acl-filter name string type keyword entry sequence-id number action drop | |
| Tree | drop | |
| Configurable | True | |
| Platforms | Supported on all platforms |
log boolean
| Description | When this is true, a log is created for each packet matching the entry For IP packets matched by an IP filter entry the log entry contains the following information: | |
| Context | acl acl-filter name string type keyword entry sequence-id number action log boolean | |
| Tree | log | |
| Default | false | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
reject
| Description | Reject matching packets. Rejected IP packets are dropped and ICMP response is messaged back to the source | |
| Context | acl acl-filter name string type keyword entry sequence-id number action reject | |
| Tree | reject | |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
v4-message-type keyword
| Description | list of Icmp Destination Unreachable code types | |
| Context | acl acl-filter name string type keyword entry sequence-id number action reject v4-message-type keyword | |
| Tree | v4-message-type | |
| Default | administratively-prohibited | |
| Options |
| |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
v6-message-type keyword
| Description | list of Icmpv6 Destination Unreachable code types | |
| Context | acl acl-filter name string type keyword entry sequence-id number action reject v6-message-type keyword | |
| Tree | v6-message-type | |
| Default | administratively-prohibited | |
| Options |
| |
| Configurable | True | |
| Platforms | 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
description string
| Description | Description string for the filter entry | |
| Context | acl acl-filter name string type keyword entry sequence-id number description string | |
| Tree | description | |
| String Length | 1 to 4096 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
last-clear string
| Description | Time of the last clear command performed by the user at this level | |
| Context | acl acl-filter name string type keyword entry sequence-id number last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
match
| Description | Enter the match context Container for the conditions that determine whether a packet matches this entry | |
| Context | acl acl-filter name string type keyword entry sequence-id number match | |
| Tree | match | |
| Configurable | True | |
| Platforms | Supported on all platforms |
ipv4
| Description | Enter the ipv4 context Container for the common layer-3 IPv4 match criteria | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 | |
| Tree | ipv4 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
destination-ip
| Description | Enter the destination-ip context Packet matching criteria based on destination IPv4 address | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 destination-ip | |
| Tree | destination-ip | |
| Configurable | True | |
| Platforms | Supported on all platforms |
address string
| Description | Match a packet if its destination IP address logically anded with the inverse of the mask equals this IP address. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 destination-ip address string | |
| Tree | address | |
| Configurable | True | |
| Platforms | Supported on all platforms |
mask string
| Description | Match a packet if its destination IP address logically anded with the inverse of this mask equals the configured IP address logically anded with the inverse of this mask. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 destination-ip mask string | |
| Tree | mask | |
| Configurable | True | |
| Platforms | Supported on all platforms |
prefix string
| Description | Match a packet if its destination IP address is within the specified IPv4 prefix. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 destination-ip prefix string | |
| Tree | prefix | |
| Configurable | True | |
| Platforms | Supported on all platforms |
prefix-list name reference
| Description | Match a packet if its destination IP address is within the specified IPv4 prefix list. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 destination-ip prefix-list name reference | |
| Tree | prefix-list | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 8 |
name reference
| Description | Enter the name context | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 destination-ip prefix-list name reference | |
| Reference | acl match-list ipv4-prefix-list name string | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
dscp-set (number | keyword)
| Description | A list of DSCP values to be matched for incoming packets. An OR match should be performed, such that a packet must match one of the values defined in this list. If the field is left empty then any DSCP value matches. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 dscp-set (number | keyword) | |
| Tree | dscp-set | |
| Range | 0 to 63 | |
| Options |
| |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
first-fragment boolean
| Description | Match the first fragment of an IPv4 datagram A packet matches the true condition if the IPv4 header indicates that the fragment-offset is zero and and the more-fragments bit is 1. It is not valid to configure this leaf without configuring a match value for the fragment leaf. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 first-fragment boolean | |
| Tree | first-fragment | |
| Configurable | True | |
| Platforms | Supported on all platforms |
fragment boolean
| Description | Match an IPv4 fragment A packet matches the true condition if the IPv4 header indicates that the fragment-offset is zero and and the more-fragments bit is 1 or if the IPv4 header indicates that the fragment-offset is greater than 0. A packet matches the false condition if it is unfragmented. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 fragment boolean | |
| Tree | fragment | |
| Configurable | True | |
| Platforms | Supported on all platforms |
icmp
| Description | Enter the icmp context A packet matches this condition if its ICMP type and code matches one of the specified combinations The rule should also have a condition that the IP protocol equals 1 (ICMP) in order for this to be interpreted correctly. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 icmp | |
| Tree | icmp | |
| Configurable | True | |
| Platforms | Supported on all platforms |
code number
type (number | keyword)
| Description | Match a single ICMP type value. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 icmp type (number | keyword) | |
| Tree | type | |
| Range | 0 to 255 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
protocol (number | keyword)
| Description | An IPv4 packet matches this condition if its IP protocol type field matches the specified value | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 protocol (number | keyword) | |
| Tree | protocol | |
| Range | 0 to 255 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
source-ip
| Description | Enter the source-ip context Packet matching criteria based on source IPv4 address | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 source-ip | |
| Tree | source-ip | |
| Configurable | True | |
| Platforms | Supported on all platforms |
address string
mask string
| Description | Match a packet if its source IP address logically anded with the inverse of this mask equals the configured IP address logically anded with the inverse of this mask. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 source-ip mask string | |
| Tree | mask | |
| Configurable | True | |
| Platforms | Supported on all platforms |
prefix string
prefix-list name reference
| Description | Match a packet if its source IP address is within the specified IPv4 prefix list. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 source-ip prefix-list name reference | |
| Tree | prefix-list | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 8 |
name reference
| Description | Enter the name context | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv4 source-ip prefix-list name reference | |
| Reference | acl match-list ipv4-prefix-list name string | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
ipv6
| Description | Enter the ipv6 context Container for the common layer-3 IPv6 match criteria | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 | |
| Tree | ipv6 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
destination-ip
| Description | Enter the destination-ip context Packet matching criteria based on destination IPv6 address | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 destination-ip | |
| Tree | destination-ip | |
| Configurable | True | |
| Platforms | Supported on all platforms |
address string
| Description | Match a packet if its destination IP address logically anded with the inverse of the mask equals this IP address. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 destination-ip address string | |
| Tree | address | |
| Configurable | True | |
| Platforms | Supported on all platforms |
mask string
| Description | Match a packet if its destination IP address logically anded with the inverse of this mask equals the configured IP address logically anded with the inverse of this mask. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 destination-ip mask string | |
| Tree | mask | |
| Configurable | True | |
| Platforms | Supported on all platforms |
prefix string
| Description | Match a packet if its destination IP address is within the specified IPv6 prefix. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 destination-ip prefix string | |
| Tree | prefix | |
| Configurable | True | |
| Platforms | Supported on all platforms |
prefix-list name reference
| Description | Match a packet if its destination IP address is within the specified IPv6 prefix list. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 destination-ip prefix-list name reference | |
| Tree | prefix-list | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 8 |
name reference
| Description | Enter the name context | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 destination-ip prefix-list name reference | |
| Reference | acl match-list ipv6-prefix-list name string | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
dscp-set (number | keyword)
| Description | A list of DSCP values to be matched for incoming packets. An OR match should be performed, such that a packet must match one of the values defined in this list. If the field is left empty then any DSCP value matches. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 dscp-set (number | keyword) | |
| Tree | dscp-set | |
| Range | 0 to 63 | |
| Options |
| |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
icmp6
| Description | Enter the icmp6 context A packet matches this condition if its ICMPv6 type and code matches one of the specified combinations The rule should also have a condition that the next-header value equals 58 (ICMPv6) in order for this to be interpreted correctly. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 icmp6 | |
| Tree | icmp6 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
code number
| Description | Match if the ICMPv6 code value is any value in the list Requires ICMPv6 type to be specified because codes are type dependent. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 icmp6 code number | |
| Tree | code | |
| Configurable | True | |
| Platforms | Supported on all platforms |
type (number | keyword)
| Description | Match a single ICMPv6 type value | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 icmp6 type (number | keyword) | |
| Tree | type | |
| Range | 0 to 255 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
next-header (number | keyword)
| Description | An IPv6 packet matches this condition if its first next-header field (in the IPv6 fixed header) contains the specified value | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 next-header (number | keyword) | |
| Tree | next-header | |
| Range | 0 to 255 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
source-ip
| Description | Enter the source-ip context Packet matching criteria based on source IPv6 address | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 source-ip | |
| Tree | source-ip | |
| Configurable | True | |
| Platforms | Supported on all platforms |
address string
mask string
| Description | Match a packet if its source IP address logically anded with the inverse of this mask equals the configured IP address logically anded with the inverse of this mask. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 source-ip mask string | |
| Tree | mask | |
| Configurable | True | |
| Platforms | Supported on all platforms |
prefix string
prefix-list name reference
| Description | Match a packet if its source IP address is within the specified IPv6 prefix list. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 source-ip prefix-list name reference | |
| Tree | prefix-list | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 8 |
name reference
| Description | Enter the name context | |
| Context | acl acl-filter name string type keyword entry sequence-id number match ipv6 source-ip prefix-list name reference | |
| Reference | acl match-list ipv6-prefix-list name string | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
l2
| Description | Enter the l2 context Container for the common layer-2 match criteria | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 | |
| Tree | l2 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
destination-mac
| Description | Enter the destination-mac context Ethernet frame matching criteria based on destination MAC address | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 destination-mac | |
| Tree | destination-mac | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
address string
| Description | Match an Ethernet frame if its destination MAC address logically anded with the mask equals this MAC address. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 destination-mac address string | |
| Tree | address | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
mask string
| Description | Match an Ethernet frame if its destination MAC address logically anded with the mask equals the configured MAC address. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 destination-mac mask string | |
| Tree | mask | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
ethertype (string | keyword)
| Description | An Ethernet frame matches this condition if its ethertype value (after 802.1Q VLAN tags) matches the specified value | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 ethertype (string | keyword) | |
| Tree | ethertype | |
| Options |
| |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
source-mac
| Description | Enter the source-mac context Ethernet frame matching criteria based on source MAC address | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 source-mac | |
| Tree | source-mac | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
address string
| Description | Match an Ethernet frame if its source MAC address logically anded with the mask equals this MAC address. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 source-mac address string | |
| Tree | address | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
mask string
| Description | Match an Ethernet frame if its source MAC address logically anded with the mask equals the configured MAC address. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 source-mac mask string | |
| Tree | mask | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
vlan
| Description | Enter the vlan context Ethernet frame matching criteria based on VLAN tags | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 vlan | |
| Tree | vlan | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
outermost-vlan-id
| Description | Enter the outermost-vlan-id context Ethernet frame matching criteria based on the outermost VLAN ID found before the subinterface-defining VLAN tag (if any) is removed. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 vlan outermost-vlan-id | |
| Tree | outermost-vlan-id | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
none
| Description | When configured, only untagged frames are matched. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 vlan outermost-vlan-id none | |
| Tree | none | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
operator keyword
| Description | Comparison operator eq = equal ge = greater than or equal to le = less than or equal to | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 vlan outermost-vlan-id operator keyword | |
| Tree | operator | |
| Options |
| |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
range
| Description | Enter the range context Container used to specify a contiguous range of VLAN IDs. Matched values include the start and end values. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 vlan outermost-vlan-id range | |
| Tree | range | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
end number
| Description | The ending VLAN ID to include in the range | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 vlan outermost-vlan-id range end number | |
| Tree | end | |
| Range | 0 to 4095 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
start number
| Description | The starting VLAN ID to include in the range | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 vlan outermost-vlan-id range start number | |
| Tree | start | |
| Range | 0 to 4095 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
value number
| Description | A VLAN ID number A value of zero is used to match priority-tagged 802.1Q frames. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match l2 vlan outermost-vlan-id value number | |
| Tree | value | |
| Range | 0 to 4095 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
transport
| Description | Enter the transport context Container for the common layer-4 transport match criteria | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport | |
| Tree | transport | |
| Configurable | True | |
| Platforms | Supported on all platforms |
destination-port
| Description | Enter the destination-port context A packet matches this condition if its destination TCP or UDP port number matches the value or range or within the port-lists that is specified The rule should also have a condition that the IP protocol equals 6 (TCP) or 17 (UDP) in order for this to be interpreted correctly. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport destination-port | |
| Tree | destination-port | |
| Configurable | True | |
| Platforms | Supported on all platforms |
operator keyword
| Description | Comparison operator eq = equal ge = greater than or equal to le = less than or equal to | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport destination-port operator keyword | |
| Tree | operator | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
port-list name reference
| Description | Name of the port list | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport destination-port port-list name reference | |
| Tree | port-list | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 1 |
name reference
| Description | Enter the name context | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport destination-port port-list name reference | |
| Reference | acl match-list port-list name string | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
range
| Description | Enter the range context Container used to specify a contiguous range of TCP/UDP port numbers | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport destination-port range | |
| Tree | range | |
| Configurable | True | |
| Platforms | Supported on all platforms |
end (number | keyword)
| Description | The ending port number to include in the range | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport destination-port range end (number | keyword) | |
| Tree | end | |
| Range | 0 to 65535 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
start (number | keyword)
| Description | The starting port number to include in the range | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport destination-port range start (number | keyword) | |
| Tree | start | |
| Range | 0 to 65535 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
value (number | keyword)
| Description | A destination port number | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport destination-port value (number | keyword) | |
| Tree | value | |
| Range | 0 to 65535 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
source-port
| Description | Enter the source-port context A packet matches this condition if its source TCP or UDP port number matches the value or range or within the port-lists that is specified The rule should also have a condition that the IP protocol equals 6 (TCP) or 17 (UDP) in order for this to be interpreted correctly. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport source-port | |
| Tree | source-port | |
| Configurable | True | |
| Platforms | Supported on all platforms |
operator keyword
| Description | Comparison operator eq = equal ge = greater than or equal to le = less than or equal to | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport source-port operator keyword | |
| Tree | operator | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
port-list name reference
| Description | Name of the port list | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport source-port port-list name reference | |
| Tree | port-list | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 1 |
name reference
| Description | Enter the name context | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport source-port port-list name reference | |
| Reference | acl match-list port-list name string | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
range
| Description | Enter the range context Container used to specify a contiguous range of TCP/UDP port numbers | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport source-port range | |
| Tree | range | |
| Configurable | True | |
| Platforms | Supported on all platforms |
end (number | keyword)
| Description | The ending port number to include in the range | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport source-port range end (number | keyword) | |
| Tree | end | |
| Range | 0 to 65535 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
start (number | keyword)
| Description | The starting port number to include in the range | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport source-port range start (number | keyword) | |
| Tree | start | |
| Range | 0 to 65535 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
value (number | keyword)
| Description | A source port number | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport source-port value (number | keyword) | |
| Tree | value | |
| Range | 0 to 65535 | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
tcp-flags string
| Description | A logical expression using the &, | and ! logical operators and the TCP flag names: rst, syn and ack. | |
| Context | acl acl-filter name string type keyword entry sequence-id number match transport tcp-flags string | |
| Tree | tcp-flags | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
statistics
| Description | Enter the statistics context Container for per-entry statistics | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms |
incomplete boolean
| Description | Returns true when at least one linecard had insufficient stats resources to ensure an accurate set of values for the number of matched packets, or when not all forwarding complexes reported their counts after control plane switchover. | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics incomplete boolean | |
| Tree | incomplete | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-clear string
| Description | Time of the last clear command performed by the user at this level or a higher level | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-match string
| Description | The elapsed time since a packet last matched the entry, considering the mgmt0 subinterface and all subinterfaces of all linecard ports that use the ACL as an input ACL | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics last-match string | |
| Tree | last-match | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
matched-packets number
| Description | The number of packets matching the entry since it was programmed or since the last clear, considering the mgmt0 subinterface and all subinterfaces of all linecard ports that use the ACL as an input ACL | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics matched-packets number | |
| Tree | matched-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
policer
| Description | Enter the policer context Policer stats for traffic matching the entry: Statistics for policer configured with scope=global and entry-specific=true, and acl configured with subinterface-specific=false. | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics policer | |
| Tree | policer | |
| Configurable | False | |
| Platforms | Supported on all platforms |
conforming-octets number
| Description | The number of bytes that were considered conforming by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics policer conforming-octets number | |
| Tree | conforming-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
conforming-packets number
| Description | The number of packets (actually Ethernet frames) that were considered conforming by the policer | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics policer conforming-packets number | |
| Tree | conforming-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
exceeding-octets number
| Description | The number of bytes that were considered exceeding by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics policer exceeding-octets number | |
| Tree | exceeding-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
exceeding-packets number
| Description | The number of packets (actually Ethernet frames) that were considered exceeding by the policer | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics policer exceeding-packets number | |
| Tree | exceeding-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
system-cpu-policer
| Description | Enter the system-cpu-policer context System CPU policer stats for traffic matching the entry: Statistics for system cpu policer configured with scope=global and entry-specific=true, and acl configured with subinterface-specific=false. | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics system-cpu-policer | |
| Tree | system-cpu-policer | |
| Configurable | False | |
| Platforms | Supported on all platforms |
conforming-octets number
| Description | The number of bytes that were considered conforming by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics system-cpu-policer conforming-octets number | |
| Tree | conforming-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
conforming-packets number
| Description | The number of packets (actually Ethernet frames) that were considered conforming by the policer | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics system-cpu-policer conforming-packets number | |
| Tree | conforming-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
exceeding-octets number
| Description | The number of bytes that were considered exceeding by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics system-cpu-policer exceeding-octets number | |
| Tree | exceeding-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
exceeding-packets number
| Description | The number of packets (actually Ethernet frames) that were considered exceeding by the policer | |
| Context | acl acl-filter name string type keyword entry sequence-id number statistics system-cpu-policer exceeding-packets number | |
| Tree | exceeding-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
tcam-entries
| Description | Enter the tcam-entries context Information about the TCAM entries used to implement the ACL entry | |
| Context | acl acl-filter name string type keyword entry sequence-id number tcam-entries | |
| Tree | tcam-entries | |
| Configurable | False | |
| Platforms | Supported on all platforms |
forwarding-complex complex-identifier string
| Description | List of forwarding complexes in the system | |
| Context | acl acl-filter name string type keyword entry sequence-id number tcam-entries forwarding-complex complex-identifier string | |
| Tree | forwarding-complex | |
| Configurable | False | |
| Platforms | Supported on all platforms |
complex-identifier string
| Description | A forwarding complex in the format (slot-number,complex-number). | |
| Context | acl acl-filter name string type keyword entry sequence-id number tcam-entries forwarding-complex complex-identifier string | |
| Configurable | False | |
| Platforms | Supported on all platforms |
input-total number
| Description | The number of TCAM entries required to implement this entry on all subinterfaces of this complex where the filter is applied to ingress traffic. For example, if a single-instance of the entry takes 2 TCAM entries and the filter is an output-only subinterface-specific filter and the filter is applied to 5 subinterfaces on output and to 5 subinterfaces on input then input-total=2. If the entry is not applied to ingress traffic on any subinterfaces of this complex then input-total=0. | |
| Context | acl acl-filter name string type keyword entry sequence-id number tcam-entries forwarding-complex complex-identifier string input-total number | |
| Tree | input-total | |
| Configurable | False | |
| Platforms | Supported on all platforms |
output-total number
| Description | The number of TCAM entries required to implement this entry on all subinterfaces of this complex where the filter is applied to egress traffic. For example, if a single-instance of the entry takes 2 TCAM entries and the filter is an output-only subinterface-specific filter and the filter is applied to 5 subinterfaces on output and to 5 subinterfaces on input then output-total=10. If the entry is not applied to egress traffic on any subinterfaces of this complex then output-total=0. | |
| Context | acl acl-filter name string type keyword entry sequence-id number tcam-entries forwarding-complex complex-identifier string output-total number | |
| Tree | output-total | |
| Configurable | False | |
| Platforms | Supported on all platforms |
single-instance number
| Description | The number of TCAM entries required to implement this entry if it is applied to only one subinterface and one traffic direction specific to this slot. This is non-zero even if the filter is not applied to any subinterfaces of this complex. It captures the effect of TCAM entry expansion to deal with L4 port or VLAN ranges, for example. | |
| Context | acl acl-filter name string type keyword entry sequence-id number tcam-entries forwarding-complex complex-identifier string single-instance number | |
| Tree | single-instance | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-clear string
| Description | Time of the last clear command performed by the user at this level | |
| Context | acl acl-filter name string type keyword last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
statistics
| Description | Enter the statistics context | |
| Context | acl acl-filter name string type keyword statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms |
statistics-per-entry boolean
| Description | Collect statistics for each entry of the ACL. If this is set to false no hardware resources are allocated to collecting statistics for this ACL policy. The exact set of statistics depend on the subinterface-specific mode | |
| Context | acl acl-filter name string type keyword statistics-per-entry boolean | |
| Tree | statistics-per-entry | |
| Configurable | True | |
| Platforms | Supported on all platforms |
subinterface-specific keyword
| Description | Controls the instantiation of the filter when it is applied as an input or output ACL disabled: all subinterfaces on a single linecard that reference the ACL as an input ACL use a shared filter instance, and all subinterfaces on a single linecard that reference the ACL as an output ACL use a shared filter instance input-only: all subinterfaces on a single linecard that reference the ACL as an output ACL use a shared filter instance, but each subinterface that references the ACL as an input ACL uses its own separate instance of the filter output-only: all subinterfaces on a single linecard that reference the ACL as an input ACL use a shared filter instance, but each subinterface that references the ACL as an output ACL uses its own separate instance of the filter input-and-output: each subinterface that references the ACL as either an input ACL or an output ACL uses its own separate instance of the filter | |
| Context | acl acl-filter name string type keyword subinterface-specific keyword | |
| Tree | subinterface-specific | |
| Default | disabled | |
| Options |
| |
| Configurable | True | |
| Platforms | Supported on all platforms |
datapath-programming
| Description | Enter the datapath-programming context Container to represent the progress of ACL datapath programming | |
| Context | acl datapath-programming | |
| Tree | datapath-programming | |
| Configurable | False | |
| Platforms | Supported on all platforms |
forwarding-complex slot-id number complex-id number
| Description | List of forwarding complexes that are currently installed and online | |
| Context | acl datapath-programming forwarding-complex slot-id number complex-id number | |
| Tree | forwarding-complex | |
| Configurable | False | |
| Platforms | Supported on all platforms |
slot-id number
| Description | The slot id | |
| Context | acl datapath-programming forwarding-complex slot-id number complex-id number | |
| Configurable | False | |
| Platforms | Supported on all platforms |
complex-id number
| Description | The complex id | |
| Context | acl datapath-programming forwarding-complex slot-id number complex-id number | |
| Range | 0 to 1 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-completed-timestamp string
| Description | The date and time when the forwarding complex last completed all datapath programming related to prior ACL configuration changes. | |
| Context | acl datapath-programming forwarding-complex slot-id number complex-id number last-completed-timestamp string | |
| Tree | last-completed-timestamp | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
programming-complete boolean
| Description | Reads false when there are still pending entries to program from prior configuration transactions Reads true when all datapath programming related to all prior ACL configuration changes is complete | |
| Context | acl datapath-programming forwarding-complex slot-id number complex-id number programming-complete boolean | |
| Tree | programming-complete | |
| Configurable | False | |
| Platforms | Supported on all platforms |
egress-mac-filtering boolean
| Description | Must be set to true in order to apply any MAC ACLs to any subinterface in the egress traffic direction. Internally this sets the following limits: Remember that the number of ACL instances per ACL policy is greater than one if subinterface-specific is set to input-and-output or output-only. A setting of true is blocked if the number of IPv4 ACL instances applied to egress traffic is already greater than 32, or if the number of IPv6 ACL instances applied to egress traffic is already greater than 32. | |
| Context | acl egress-mac-filtering boolean | |
| Tree | egress-mac-filtering | |
| Default | false | |
| Configurable | True | |
| Platforms | 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5 |
interface interface-id string
| Description | List of interfaces and subinterfaces referencing ACL filters. | |
| Context | acl interface interface-id string | |
| Tree | interface | |
| Configurable | True | |
| Platforms | Supported on all platforms | |
| Max. Elements | 16383 |
interface-id string
| Description | Identifier for the interface or subinterface. | |
| Context | acl interface interface-id string | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
input
| Description | Enter the input context Container for ACL filters that apply to ingress traffic on the subinterface | |
| Context | acl interface interface-id string input | |
| Tree | input | |
| Configurable | True | |
| Platforms | Supported on all platforms |
acl-filter name reference type reference
| Description | MAC, IPv4, IPv6 ACL filter(s) to be applied on this subinterface direction On 7220 and 7250 IXR platforms only a single MAC, IPv4 or IPv6 filter is supported. | |
| Context | acl interface interface-id string input acl-filter name reference type reference | |
| Tree | acl-filter | |
| Configurable | True | |
| Platforms | Supported on all platforms | |
| Max. Elements | 4 |
name reference
| Description | Enter the name context | |
| Context | acl interface interface-id string input acl-filter name reference type reference | |
| Reference | acl acl-filter name | |
| Configurable | True | |
| Platforms | Supported on all platforms |
type reference
| Description | Enter the type context | |
| Context | acl interface interface-id string input acl-filter name reference type reference | |
| Reference | acl acl-filter type | |
| Configurable | True | |
| Platforms | Supported on all platforms |
entry sequence-id reference
| Description | ACL Filter statistics per entry and per subinterface | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference | |
| Tree | entry | |
| Configurable | False | |
| Platforms | Supported on all platforms |
sequence-id reference
| Description | Reference to type entry ID key | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference | |
| Reference | acl acl-filter entry sequence-id | |
| Configurable | False | |
| Platforms | Supported on all platforms |
policer
| Description | Enter the policer context Policer stats for traffic matching the entry: Statistics under /acl/interfaces for policer configured with scope=subinterface and entry-specific=true, and acl configured with subinterface-specific=input-and-output. | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference policer | |
| Tree | policer | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-octets number
| Description | The number of bytes that were considered conforming by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference policer conforming-octets number | |
| Tree | conforming-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-packets number
| Description | The number of packets (actually Ethernet frames) that were considered conforming by the policer | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference policer conforming-packets number | |
| Tree | conforming-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-octets number
| Description | The number of bytes that were considered exceeding by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference policer exceeding-octets number | |
| Tree | exceeding-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-packets number
| Description | The number of packets (actually Ethernet frames) that were considered exceeding by the policer | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference policer exceeding-packets number | |
| Tree | exceeding-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
statistics
| Description | Enter the statistics context Container for per-entry statistics | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
incomplete boolean
| Description | Returns true when at least one linecard had insufficient stats resources to ensure an accurate set of values for the number of matched packets, or when one or more forwarding complexes have not yet contributed their counts after control plane switchover. | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference statistics incomplete boolean | |
| Tree | incomplete | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
last-clear string
| Description | Time of the last clear command performed by the user at this level or a higher level | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
last-match string
| Description | The elapsed time since a packet last matched the entry, considering the mgmt0 subinterface and all subinterfaces of all linecard ports that use the ACL as an input ACL | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference statistics last-match string | |
| Tree | last-match | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
matched-packets number
| Description | The number of packets matching the entry since it was programmed or since the last clear, considering the mgmt0 subinterface and all subinterfaces of all linecard ports that use the ACL as an input ACL | |
| Context | acl interface interface-id string input acl-filter name reference type reference entry sequence-id reference statistics matched-packets number | |
| Tree | matched-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
statistics
| Description | Enter the statistics context | |
| Context | acl interface interface-id string input acl-filter name reference type reference statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms |
statistics
| Description | Enter the statistics context Container for policer scope=subinterface and per-entry-statistics=false statistics | |
| Context | acl interface interface-id string input statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
last-clear string
| Description | Time of the last clear command performed by the user at this level | |
| Context | acl interface interface-id string input statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
policer
| Description | Enter the policer context Policer stats for traffic matching one or multiple entries: List of ACL policer statistics of scope=subinterface and per-entry-statistics=false, and acl configured with subinterface-specific=false. | |
| Context | acl interface interface-id string input statistics policer | |
| Tree | policer | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-octets number
| Description | The number of bytes that were considered conforming by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl interface interface-id string input statistics policer conforming-octets number | |
| Tree | conforming-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-packets number
| Description | The number of packets (actually Ethernet frames) that were considered conforming by the policer | |
| Context | acl interface interface-id string input statistics policer conforming-packets number | |
| Tree | conforming-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-octets number
| Description | The number of bytes that were considered exceeding by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl interface interface-id string input statistics policer exceeding-octets number | |
| Tree | exceeding-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-packets number
| Description | The number of packets (actually Ethernet frames) that were considered exceeding by the policer | |
| Context | acl interface interface-id string input statistics policer exceeding-packets number | |
| Tree | exceeding-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
interface-ref
| Description | Enter the interface-ref context Reference to an interface or subinterface | |
| Context | acl interface interface-id string interface-ref | |
| Tree | interface-ref | |
| Configurable | True | |
| Platforms | Supported on all platforms |
interface reference
| Description | Reference to a base interface, for example a port or LAG | |
| Context | acl interface interface-id string interface-ref interface reference | |
| Tree | interface | |
| Reference | interface name string | |
| Configurable | True | |
| Platforms | Supported on all platforms |
subinterface reference
| Description | Reference to a subinterface This requires the base interface to be specified using the interface leaf in this container. | |
| Context | acl interface interface-id string interface-ref subinterface reference | |
| Tree | subinterface | |
| Reference | interface name string subinterface index number | |
| Configurable | True | |
| Platforms | Supported on all platforms |
output
| Description | Enter the output context Container for ACL filters that apply to egress traffic on the subinterface | |
| Context | acl interface interface-id string output | |
| Tree | output | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7215 |
acl-filter name reference type reference
| Description | MAC, IPv4, IPv6 ACL filter(s) to be applied on this subinterface direction On 7220 and 7250 IXR platforms only a single MAC, IPv4 or IPv6 filter is supported. | |
| Context | acl interface interface-id string output acl-filter name reference type reference | |
| Tree | acl-filter | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7215 | |
| Max. Elements | 4 |
name reference
| Description | Enter the name context | |
| Context | acl interface interface-id string output acl-filter name reference type reference | |
| Reference | acl acl-filter name | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7215 |
type reference
| Description | Enter the type context | |
| Context | acl interface interface-id string output acl-filter name reference type reference | |
| Reference | acl acl-filter type | |
| Configurable | True | |
| Platforms | Supported on all platforms except 7215 |
entry sequence-id reference
| Description | ACL Filter statistics per entry and per subinterface | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference | |
| Tree | entry | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7215 |
sequence-id reference
| Description | Reference to type entry ID key | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference | |
| Reference | acl acl-filter entry sequence-id | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7215 |
policer
| Description | Enter the policer context Policer stats for traffic matching the entry: Statistics under /acl/interfaces for policer configured with scope=subinterface and entry-specific=true, and acl configured with subinterface-specific=input-and-output. | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference policer | |
| Tree | policer | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-octets number
| Description | The number of bytes that were considered conforming by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference policer conforming-octets number | |
| Tree | conforming-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-packets number
| Description | The number of packets (actually Ethernet frames) that were considered conforming by the policer | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference policer conforming-packets number | |
| Tree | conforming-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-octets number
| Description | The number of bytes that were considered exceeding by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference policer exceeding-octets number | |
| Tree | exceeding-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-packets number
| Description | The number of packets (actually Ethernet frames) that were considered exceeding by the policer | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference policer exceeding-packets number | |
| Tree | exceeding-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
statistics
| Description | Enter the statistics context Container for per-entry statistics | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
incomplete boolean
| Description | Returns true when at least one linecard had insufficient stats resources to ensure an accurate set of values for the number of matched packets, or when one or more forwarding complexes have not yet contributed their counts after control plane switchover. | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference statistics incomplete boolean | |
| Tree | incomplete | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
last-clear string
| Description | Time of the last clear command performed by the user at this level or a higher level | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
last-match string
| Description | The elapsed time since a packet last matched the entry, considering the mgmt0 subinterface and all subinterfaces of all linecard ports that use the ACL as an input ACL | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference statistics last-match string | |
| Tree | last-match | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
matched-packets number
| Description | The number of packets matching the entry since it was programmed or since the last clear, considering the mgmt0 subinterface and all subinterfaces of all linecard ports that use the ACL as an input ACL | |
| Context | acl interface interface-id string output acl-filter name reference type reference entry sequence-id reference statistics matched-packets number | |
| Tree | matched-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
statistics
| Description | Enter the statistics context | |
| Context | acl interface interface-id string output acl-filter name reference type reference statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms except 7215 |
statistics
| Description | Enter the statistics context Container for policer scope=subinterface and per-entry-statistics=false statistics | |
| Context | acl interface interface-id string output statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
last-clear string
| Description | Time of the last clear command performed by the user at this level | |
| Context | acl interface interface-id string output statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
policer
| Description | Enter the policer context Policer stats for traffic matching one or multiple entries: List of ACL policer statistics of scope=subinterface and per-entry-statistics=false, and acl configured with subinterface-specific=false. | |
| Context | acl interface interface-id string output statistics policer | |
| Tree | policer | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-octets number
| Description | The number of bytes that were considered conforming by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl interface interface-id string output statistics policer conforming-octets number | |
| Tree | conforming-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-packets number
| Description | The number of packets (actually Ethernet frames) that were considered conforming by the policer | |
| Context | acl interface interface-id string output statistics policer conforming-packets number | |
| Tree | conforming-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-octets number
| Description | The number of bytes that were considered exceeding by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl interface interface-id string output statistics policer exceeding-octets number | |
| Tree | exceeding-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-packets number
| Description | The number of packets (actually Ethernet frames) that were considered exceeding by the policer | |
| Context | acl interface interface-id string output statistics policer exceeding-packets number | |
| Tree | exceeding-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
ipv4-tcam-action-profile keyword
| Description | This profile selects between IPv4 ACL log and reject actions and BGP FlowSpec redirect programming in hardware | |
| Context | acl ipv4-tcam-action-profile keyword | |
| Tree | ipv4-tcam-action-profile | |
| Default | acl-log-reject | |
| Options |
| |
| Configurable | True | |
| Platforms | 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
match-list
| Description | Enter the match-list context Top level container for match list model config and operational state data | |
| Context | acl match-list | |
| Tree | match-list | |
| Configurable | True | |
| Platforms | Supported on all platforms |
ipv4-prefix-list name string
| Description | A user defined IPv4 prefix list description | |
| Context | acl match-list ipv4-prefix-list name string | |
| Tree | ipv4-prefix-list | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 2048 |
name string
| Description | Reference to the name of the IPv4 prefix list | |
| Context | acl match-list ipv4-prefix-list name string | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
apply-path index number
| Description | Specifies a filter match list IP prefix lists apply-path | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number | |
| Tree | apply-path | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
index number
| Description | This object specifies an index of the selection criterion | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number | |
| Range | 1 to 255 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
network-instance
| Description | Enter the network-instance context Reference to a specific network-instance, either name or regular-expression to match multiple network-instances | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number network-instance | |
| Tree | network-instance | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
match reference
| Description | Enter the match context | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number network-instance match reference | |
| Tree | match | |
| Reference | network-instance name string | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
match-pattern string
| Description | Enter the match-pattern context | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number network-instance match-pattern string | |
| Tree | match-pattern | |
| String Length | 1 to 64 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
source
| Description | Enter the source context | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number network-instance source | |
| Tree | source | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
interface string
| Description | This object specifies a match condition on the IP or IPv6 address of configured interfaces | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number network-instance source interface string | |
| Tree | interface | |
| String Length | 1 to 64 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
protocol
| Description | Enter the protocol context | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number network-instance source protocol | |
| Tree | protocol | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
bgp
| Description | Enter the bgp context | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number network-instance source protocol bgp | |
| Tree | bgp | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
group string
| Description | This specifies a match condition on the group name of configured bgp peers | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number network-instance source protocol bgp group string | |
| Tree | group | |
| String Length | 1 to 64 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
neighbor string
| Description | This specifies a match condition on the IP or IPv6 addresses of configured bgp peers | |
| Context | acl match-list ipv4-prefix-list name string apply-path index number network-instance source protocol bgp neighbor string | |
| Tree | neighbor | |
| String Length | 1 to 64 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
description string
| Description | Description string for the prefix list | |
| Context | acl match-list ipv4-prefix-list name string description string | |
| Tree | description | |
| String Length | 1 to 4096 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
prefix ipv4-prefix string
| Description | List of IPv4 prefixes | |
| Context | acl match-list ipv4-prefix-list name string prefix ipv4-prefix string | |
| Tree | prefix | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 8192 |
ipv4-prefix string
| Description | A user defined IPv4 prefix | |
| Context | acl match-list ipv4-prefix-list name string prefix ipv4-prefix string | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
ipv6-prefix-list name string
| Description | A user defined IPv6 prefix list description | |
| Context | acl match-list ipv6-prefix-list name string | |
| Tree | ipv6-prefix-list | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 2048 |
name string
| Description | Reference to the name of the IPv6 prefix list | |
| Context | acl match-list ipv6-prefix-list name string | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
apply-path index number
| Description | Specifies a filter match list IP prefix lists apply-path | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number | |
| Tree | apply-path | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
index number
| Description | This object specifies an index of the selection criterion | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number | |
| Range | 1 to 255 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
network-instance
| Description | Enter the network-instance context Reference to a specific network-instance, either name or regular-expression to match multiple network-instances | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number network-instance | |
| Tree | network-instance | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
match reference
| Description | Enter the match context | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number network-instance match reference | |
| Tree | match | |
| Reference | network-instance name string | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
match-pattern string
| Description | Enter the match-pattern context | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number network-instance match-pattern string | |
| Tree | match-pattern | |
| String Length | 1 to 64 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
source
| Description | Enter the source context | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number network-instance source | |
| Tree | source | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
interface string
| Description | This object specifies a match condition on the IP or IPv6 address of configured interfaces | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number network-instance source interface string | |
| Tree | interface | |
| String Length | 1 to 64 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
protocol
| Description | Enter the protocol context | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number network-instance source protocol | |
| Tree | protocol | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
bgp
| Description | Enter the bgp context | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number network-instance source protocol bgp | |
| Tree | bgp | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
group string
| Description | This specifies a match condition on the group name of configured bgp peers | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number network-instance source protocol bgp group string | |
| Tree | group | |
| String Length | 1 to 64 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
neighbor string
| Description | This specifies a match condition on the IP or IPv6 addresses of configured bgp peers | |
| Context | acl match-list ipv6-prefix-list name string apply-path index number network-instance source protocol bgp neighbor string | |
| Tree | neighbor | |
| String Length | 1 to 64 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
description string
| Description | Description string for the prefix list | |
| Context | acl match-list ipv6-prefix-list name string description string | |
| Tree | description | |
| String Length | 1 to 4096 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
prefix ipv6-prefix string
| Description | List of IPv6 prefixes | |
| Context | acl match-list ipv6-prefix-list name string prefix ipv6-prefix string | |
| Tree | prefix | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 8192 |
ipv6-prefix string
| Description | A user defined IPv6 prefix | |
| Context | acl match-list ipv6-prefix-list name string prefix ipv6-prefix string | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
port-list name string
| Description | A user defined L4 port list | |
| Context | acl match-list port-list name string | |
| Tree | port-list | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 2048 |
name string
| Description | Reference to the name of the port list | |
| Context | acl match-list port-list name string | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
description string
| Description | Description string for the port list | |
| Context | acl match-list port-list name string description string | |
| Tree | description | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
port id number
| Description | List of ports or port-ranges | |
| Context | acl match-list port-list name string port id number | |
| Tree | port | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP | |
| Max. Elements | 64 |
id number
| Description | Identifier of the port-list entry | |
| Context | acl match-list port-list name string port id number | |
| Range | 1 to 64 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
range
| Description | Enter the range context Container used to specify a contiguous range of TCP/UDP port numbers | |
| Context | acl match-list port-list name string port id number range | |
| Tree | range | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
end (number | keyword)
| Description | The ending port number to include in the range | |
| Context | acl match-list port-list name string port id number range end (number | keyword) | |
| Tree | end | |
| Range | 0 to 65535 | |
| Options |
| |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
start (number | keyword)
| Description | The starting port number to include in the range | |
| Context | acl match-list port-list name string port id number range start (number | keyword) | |
| Tree | start | |
| Range | 0 to 65535 | |
| Options |
| |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
value (number | keyword)
| Description | A destination port number | |
| Context | acl match-list port-list name string port id number value (number | keyword) | |
| Tree | value | |
| Range | 0 to 65535 | |
| Options |
| |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H2, 7220 IXR-H3, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
policers
policer name string
| Description | List of policer templates used in subintreface and CPM Filter ACL. | |
| Context | acl policers policer name string | |
| Tree | policer | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
name string
| Description | User-defined name of the policer | |
| Context | acl policers policer name string | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
entry-specific boolean
| Description | Controls the instantiation of the policer between filter entries false: one policer instance is created from this template and it is shared by all entries of in the same ACL filter that refer to this policer true: multiple policer instances are created from this template, one for each ACL filter entry that refers to this policer | |
| Context | acl policers policer name string entry-specific boolean | |
| Tree | entry-specific | |
| Default | false | |
| Configurable | True | |
| Platforms | Supported on all platforms |
maximum-burst-packet number
| Description | The maximum depth of the policer bucket in number of packets | |
| Context | acl policers policer name string maximum-burst-packet number | |
| Tree | maximum-burst-packet | |
| Range | 32 to 126976 | |
| Default | 32 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
maximum-burst-size number
| Description | The MBS bucket depth in bytes | |
| Context | acl policers policer name string maximum-burst-size number | |
| Tree | maximum-burst-size | |
| Range | 1 to 125000000 | |
| Units | bytes | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
peak-rate-kbps number
| Description | The peak information rate (PIR) in kbps (bucket empty/fill rate). | |
| Context | acl policers policer name string peak-rate-kbps number | |
| Tree | peak-rate-kbps | |
| Range | 1 to 800000000 | |
| Units | kbps | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
peak-rate-pps number
| Description | The maximum number of packets per second (bucket empty/fill rate) | |
| Context | acl policers policer name string peak-rate-pps number | |
| Tree | peak-rate-pps | |
| Range | 64 to 4000000 | |
| Default | 64 | |
| Configurable | True | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
scope keyword
| Description | Controls the instantiation of the policer between subinterfaces global: policer is instantiated per direction and shared between ACL, requires filter subinterface-specific disabled subinterface: policer is instantiated per subinterface and per direction, requires filter subinterface-specific input-and-ouput | |
| Context | acl policers policer name string scope keyword | |
| Tree | scope | |
| Default | global | |
| Options |
| |
| Configurable | True | |
| Platforms | 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen3, 7250 IXR-X4, 7250 IXR-X4-OSFP |
statistics
| Description | Enter the statistics context Container for linecard policer statistics. | |
| Context | acl policers policer name string statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
aggregate
| Description | Enter the aggregate context None of these statistics are populated if the policer is configured as entry-specific=true. If entry-specific=false and subinterface-specific=true, this is sum of all the entries and all the policer templates instantiated for all subintrefaces. If entry-specific=false and subinterface-specific=false, this is sum of all the entries using this policer template. | |
| Context | acl policers policer name string statistics aggregate | |
| Tree | aggregate | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-octets number
| Description | The number of bytes that were considered conforming by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl policers policer name string statistics aggregate conforming-octets number | |
| Tree | conforming-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
conforming-packets number
| Description | The number of packets (actually Ethernet frames) that were considered conforming by the policer | |
| Context | acl policers policer name string statistics aggregate conforming-packets number | |
| Tree | conforming-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-octets number
| Description | The number of bytes that were considered exceeding by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl policers policer name string statistics aggregate exceeding-octets number | |
| Tree | exceeding-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
exceeding-packets number
| Description | The number of packets (actually Ethernet frames) that were considered exceeding by the policer | |
| Context | acl policers policer name string statistics aggregate exceeding-packets number | |
| Tree | exceeding-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
last-clear string
| Description | Time of the last clear command that applied to these statistics | |
| Context | acl policers policer name string statistics aggregate last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | 7215 IXS-A1, 7220 IXR-D1, 7220 IXR-D2, 7220 IXR-D2L, 7220 IXR-D3, 7220 IXR-D3L, 7220 IXR-D4, 7220 IXR-D5, 7220 IXR-H4, 7220 IXR-H4-32D, 7220 IXR-H5-32D, 7220 IXR-H5-64D, 7220 IXR-H5-64O, 7220 IXR-H5-64O-512, 7220 IXR-H6-64, 7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen2cp-3, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen2cp-3, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP |
system-cpu-policer name string
| Description | List of system CPU policer templates. For each policer in this list one or more policer instances are implemented in the XDP-CPM software and these policer instances process the aggregate of terminating traffic received from all linecards. | |
| Context | acl policers system-cpu-policer name string | |
| Tree | system-cpu-policer | |
| Configurable | True | |
| Platforms | Supported on all platforms |
name string
| Description | User-defined name of the policer | |
| Context | acl policers system-cpu-policer name string | |
| String Length | 1 to 255 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
entry-specific boolean
| Description | If set to false, only one policer instance is created from this template and it is shared by all entries of all cpm-filter ACLs that refer to this policer. If set to true, multiple policer instances are created from this template, one for each cpm-filter entry that refers to the policer template. | |
| Context | acl policers system-cpu-policer name string entry-specific boolean | |
| Tree | entry-specific | |
| Default | false | |
| Configurable | True | |
| Platforms | Supported on all platforms |
maximum-burst-packet number
| Description | The maximum depth of the policer bucket in number of packets | |
| Context | acl policers system-cpu-policer name string maximum-burst-packet number | |
| Tree | maximum-burst-packet | |
| Range | 16 to 4000000 | |
| Default | 16 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
peak-rate-pps number
| Description | The maximum number of packets per second (bucket empty/fill rate) | |
| Context | acl policers system-cpu-policer name string peak-rate-pps number | |
| Tree | peak-rate-pps | |
| Range | 1 to 4000000 | |
| Configurable | True | |
| Platforms | Supported on all platforms |
statistics
| Description | Enter the statistics context Container for system CPU policer statistics None of these statistics are populated if the policer is configured as entry-specific=true. | |
| Context | acl policers system-cpu-policer name string statistics | |
| Tree | statistics | |
| Configurable | False | |
| Platforms | Supported on all platforms |
conforming-octets number
| Description | The number of bytes that were considered conforming by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl policers system-cpu-policer name string statistics conforming-octets number | |
| Tree | conforming-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
conforming-packets number
| Description | The number of packets (actually Ethernet frames) that were considered conforming by the policer | |
| Context | acl policers system-cpu-policer name string statistics conforming-packets number | |
| Tree | conforming-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
exceeding-octets number
| Description | The number of bytes that were considered exceeding by the policer. The byte count includes 18 bytes of Ethernet overhead for every IP packet. | |
| Context | acl policers system-cpu-policer name string statistics exceeding-octets number | |
| Tree | exceeding-octets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
exceeding-packets number
| Description | The number of packets (actually Ethernet frames) that were considered exceeding by the policer | |
| Context | acl policers system-cpu-policer name string statistics exceeding-packets number | |
| Tree | exceeding-packets | |
| Default | 0 | |
| Configurable | False | |
| Platforms | Supported on all platforms |
last-clear string
| Description | Time of the last clear command that applied to these statistics | |
| Context | acl policers system-cpu-policer name string statistics last-clear string | |
| Tree | last-clear | |
| String Length | 20 to 32 | |
| Configurable | False | |
| Platforms | Supported on all platforms |