tools oam

oam
+  ethcfm
   +  clear-cfm-statistics 
   +  delete-auto-discovered-meps 
   +  delete-learned-remote-macs 
   +  domain domain-id string 
      +  association association-id string 
         +  delete-auto-discovered-meps 
         +  delete-learned-remote-macs 
         +  mep mep-id number 
            +  clear-cfm-statistics 
            +  delete-learned-remote-macs 
            +  on-demand
               +  linktrace
                  +  target (unicast-mac-address | number)
                  +  ttl number
               +  loopback
                  +  data-tlv-size number
                  +  priority number
                  +  target (unicast-mac-address | number | keyword)
            +  remote-mep remote-mep-id number 
               +  delete-auto-discovered-meps 
               +  delete-learned-remote-macs 
            +  terminate-active-test keyword
      +  delete-auto-discovered-meps 
      +  delete-learned-remote-macs 
+  lsp-ping
   +  ldp
      +  clear 
      +  fec prefix (ipv4-prefix | ipv6-prefix) 
         +  destination-ip (ipv4-address | ipv6-address)
         +  ecmp-interface-select string
         +  ecmp-next-hop-select (ipv4-address | ipv6-address)
         +  interval number
         +  mpls-ttl number
         +  probe-size number
         +  send-count number
         +  source-ip (ipv4-address | ipv6-address)
         +  timeout number
         +  traffic-class number
   +  rsvp-te
      +  clear 
      +  tunnel tunnel-name string 
         +  destination-ip (ipv4-address | ipv6-address)
         +  interval number
         +  mpls-ttl number
         +  path string
         +  probe-size number
         +  send-count number
         +  source-ip (ipv4-address | ipv6-address)
         +  timeout number
         +  traffic-class number
   +  sr-isis
      +  clear 
      +  prefix-sid prefix (ipv4-prefix | ipv6-prefix) 
         +  destination-ip (ipv4-address | ipv6-address)
         +  ecmp-interface-select string
         +  ecmp-next-hop-select (ipv4-address | ipv6-address)
         +  igp-instance number
         +  interval number
         +  mpls-ttl number
         +  probe-size number
         +  send-count number
         +  source-ip (ipv4-address | ipv6-address)
         +  timeout number
         +  traffic-class number
   +  te-policy
      +  sr-colored
         +  clear 
         +  policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) 
            +  destination-ip (ipv4-address | ipv6-address)
            +  discriminator number
            +  ecmp-interface-select string
            +  ecmp-next-hop-select (ipv4-address | ipv6-address)
            +  interval number
            +  mpls-ttl number
            +  originator-address (ipv4-address | ipv6-address)
            +  originator-asn number
            +  probe-size number
            +  protocol-origin keyword
            +  segment-list-index number
            +  send-count number
            +  source-ip (ipv4-address | ipv6-address)
            +  timeout number
            +  traffic-class number
      +  sr-uncolored
         +  clear 
         +  policy policy-name string protocol-origin keyword 
            +  destination-ip (ipv4-address | ipv6-address)
            +  ecmp-interface-select string
            +  ecmp-next-hop-select (ipv4-address | ipv6-address)
            +  interval number
            +  mpls-ttl number
            +  probe-size number
            +  segment-list-index number
            +  send-count number
            +  source-ip (ipv4-address | ipv6-address)
            +  timeout number
            +  traffic-class number
+  lsp-trace
   +  ldp
      +  clear 
      +  fec prefix (ipv4-prefix | ipv6-prefix) 
         +  destination-ip (ipv4-address | ipv6-address)
         +  ecmp-interface-select string
         +  ecmp-next-hop-select (ipv4-address | ipv6-address)
         +  interval number
         +  maximum-failures number
         +  maximum-mpls-ttl number
         +  minimum-mpls-ttl number
         +  probe-count number
         +  probe-size number
         +  source-ip (ipv4-address | ipv6-address)
         +  timeout number
         +  traffic-class number
   +  rsvp-te
      +  clear 
      +  tunnel tunnel-name string 
         +  destination-ip (ipv4-address | ipv6-address)
         +  interval number
         +  maximum-failures number
         +  maximum-mpls-ttl number
         +  minimum-mpls-ttl number
         +  path string
         +  probe-count number
         +  probe-size number
         +  source-ip (ipv4-address | ipv6-address)
         +  timeout number
         +  traffic-class number
   +  sr-isis
      +  clear 
      +  prefix-sid prefix (ipv4-prefix | ipv6-prefix) 
         +  destination-ip (ipv4-address | ipv6-address)
         +  ecmp-interface-select string
         +  ecmp-next-hop-select (ipv4-address | ipv6-address)
         +  igp-instance number
         +  interval number
         +  maximum-failures number
         +  maximum-mpls-ttl number
         +  minimum-mpls-ttl number
         +  probe-count number
         +  probe-size number
         +  source-ip (ipv4-address | ipv6-address)
         +  timeout number
         +  traffic-class number
   +  te-policy
      +  sr-colored
         +  clear 
         +  policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) 
            +  destination-ip (ipv4-address | ipv6-address)
            +  discriminator number
            +  ecmp-interface-select string
            +  ecmp-next-hop-select (ipv4-address | ipv6-address)
            +  interval number
            +  maximum-failures number
            +  maximum-mpls-ttl number
            +  minimum-mpls-ttl number
            +  originator-address (ipv4-address | ipv6-address)
            +  originator-asn number
            +  probe-count number
            +  probe-size number
            +  protocol-origin keyword
            +  segment-list-index number
            +  source-ip (ipv4-address | ipv6-address)
            +  timeout number
            +  traffic-class number
      +  sr-uncolored
         +  clear 
         +  policy policy-name string protocol-origin keyword 
            +  destination-ip (ipv4-address | ipv6-address)
            +  ecmp-interface-select string
            +  ecmp-next-hop-select (ipv4-address | ipv6-address)
            +  interval number
            +  maximum-failures number
            +  maximum-mpls-ttl number
            +  minimum-mpls-ttl number
            +  probe-count number
            +  probe-size number
            +  segment-list-index number
            +  source-ip (ipv4-address | ipv6-address)
            +  timeout number
            +  traffic-class number
+  performance-monitoring
   +  ethcfm
      +  session session-name string 
         +  clear 
         +  on-demand-action keyword
   +  ip
      +  session session-name string 
         +  clear 
         +  on-demand-action keyword
+  service-activation-testhead
   +  clear 
   +  service-test test-name string 
      +  clear
         +  run number
      +  start 
      +  stop 
+  twamp
   +  server
      +  network-instance name string 
         +  clear 

oam Descriptions

oam

Description Enclosing container for OAM management.
Contextoam
Treeoam
ConfigurableTrue
PlatformsSupported on all platforms

ethcfm

Description Enter ETH-CFM on-demand tools
Context oam ethcfm
Treeethcfm
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

clear-cfm-statistics

Description

Clears ETH-CFM statistics

This clears the statistics at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all ETH-CFM system statistics are cleared. If the command is issued at the ethcfm domain association local-mep those individual mep OpCode statistics will be cleared.

Contextoam ethcfm clear-cfm-statistics
Treeclear-cfm-statistics
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

delete-auto-discovered-meps

Description

Delete discovered meps from the remote mep database

This deletes the entries at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all entries are deleted. If the command is issued at the ethcfm domain association local-mep remote-mep that specific entry will be deleted.

Contextoam ethcfm delete-auto-discovered-meps
Treedelete-auto-discovered-meps
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

delete-learned-remote-macs

Description

Delete learned remote macs from the mep mac table

This deletes the entries at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all entries are deleted. If the command is issued at the ethcfm domain association local-mep remote-mep that specific entry will be delete.

Contextoam ethcfm delete-learned-remote-macs
Treedelete-learned-remote-macs
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

domain domain-id string

Description Enter the domain list instance
Context oam ethcfm domain domain-id string
Treedomain
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
domain-id string
Description Enter the domain-id context
Context oam ethcfm domain domain-id string
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
association association-id string
Description Enter the association list instance
Context oam ethcfm domain domain-id string association association-id string
Treeassociation
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
association-id string
Description Enter the association-id context
Context oam ethcfm domain domain-id string association association-id string
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
delete-auto-discovered-meps
Description

Delete discovered meps from the remote mep database

This deletes the entries at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all entries are deleted. If the command is issued at the ethcfm domain association local-mep remote-mep that specific entry will be deleted.

Contextoam ethcfm domain domain-id string association association-id string delete-auto-discovered-meps
Treedelete-auto-discovered-meps
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
delete-learned-remote-macs
Description

Delete learned remote macs from the mep mac table

This deletes the entries at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all entries are deleted. If the command is issued at the ethcfm domain association local-mep remote-mep that specific entry will be delete.

Contextoam ethcfm domain domain-id string association association-id string delete-learned-remote-macs
Treedelete-learned-remote-macs
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
mep mep-id number
Description Enter the mep list instance
Context oam ethcfm domain domain-id string association association-id string mep mep-id number
Treemep
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
mep-id number
Description Enter the mep-id context
Context oam ethcfm domain domain-id string association association-id string mep mep-id number
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear-cfm-statistics
Description

Clears ETH-CFM statistics

This clears the statistics at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all ETH-CFM system statistics are cleared. If the command is issued at the ethcfm domain association local-mep those individual mep OpCode statistics will be cleared.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id number clear-cfm-statistics
Treeclear-cfm-statistics
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
delete-learned-remote-macs
Description

Delete learned remote macs from the mep mac table

This deletes the entries at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all entries are deleted. If the command is issued at the ethcfm domain association local-mep remote-mep that specific entry will be delete.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id number delete-learned-remote-macs
Treedelete-learned-remote-macs
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
on-demand
Description Enter the on-demand context
Context oam ethcfm domain domain-id string association association-id string mep mep-id number on-demand
Treeon-demand
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
linktrace
Description

Enter the linktrace context

Perform an Eth-CFM linktrace test

Contextoam ethcfm domain domain-id string association association-id string mep mep-id number on-demand linktrace
Treelinktrace
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
target (unicast-mac-address | number)
Description Target MAC address or MEP ID for the test.
Contextoam ethcfm domain domain-id string association association-id string mep mep-id number on-demand linktrace target (unicast-mac-address | number)
Treetarget
Range1 to 8191
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ttl number
Description Time to live value encoded into the CFM PDU
Contextoam ethcfm domain domain-id string association association-id string mep mep-id number on-demand linktrace ttl number
Treettl
Range0 to 255
Default64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
loopback
Description

Enter the loopback context

Perform an Eth-CFM loopback test

Contextoam ethcfm domain domain-id string association association-id string mep mep-id number on-demand loopback
Treeloopback
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
priority number
Description The dot1p priority to be used in the transmitted LBM test packet
Contextoam ethcfm domain domain-id string association association-id string mep mep-id number on-demand loopback priority number
Treepriority
Range0 to 7
Default7
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
target (unicast-mac-address | number | keyword)
Description

Target MAC address or MEP ID or multicast keyword for the test

The multicast enumeration will be replaced with a Class 1 MAC address in the form 01:80:c2:00:00:3x. Where x = the domain level.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id number on-demand loopback target (unicast-mac-address | number | keyword)
Treetarget
Range1 to 8191
Options
  • multicast

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
remote-mep remote-mep-id number
Description Remote MEP ID from the remote MEP database
Contextoam ethcfm domain domain-id string association association-id string mep mep-id number remote-mep remote-mep-id number
Treeremote-mep
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
delete-auto-discovered-meps
Description

Delete discovered meps from the remote mep database

This deletes the entries at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all entries are deleted. If the command is issued at the ethcfm domain association local-mep remote-mep that specific entry will be deleted.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id number remote-mep remote-mep-id number delete-auto-discovered-meps
Treedelete-auto-discovered-meps
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
delete-learned-remote-macs
Description

Delete learned remote macs from the mep mac table

This deletes the entries at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all entries are deleted. If the command is issued at the ethcfm domain association local-mep remote-mep that specific entry will be delete.

Contextoam ethcfm domain domain-id string association association-id string mep mep-id number remote-mep remote-mep-id number delete-learned-remote-macs
Treedelete-learned-remote-macs
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
delete-auto-discovered-meps
Description

Delete discovered meps from the remote mep database

This deletes the entries at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all entries are deleted. If the command is issued at the ethcfm domain association local-mep remote-mep that specific entry will be deleted.

Contextoam ethcfm domain domain-id string delete-auto-discovered-meps
Treedelete-auto-discovered-meps
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
delete-learned-remote-macs
Description

Delete learned remote macs from the mep mac table

This deletes the entries at the relative hierarchy to the command instance. For example, if the command is issued directly under ethcfm all entries are deleted. If the command is issued at the ethcfm domain association local-mep remote-mep that specific entry will be delete.

Contextoam ethcfm domain domain-id string delete-learned-remote-macs
Treedelete-learned-remote-macs
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

lsp-ping

Description

Enter the lsp-ping context

Initiate LSP ping of the remote endpoint of an MPLS or segment routing tunnel

Contextoam lsp-ping
Treelsp-ping
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

ldp

Description

Enter the ldp context

Parameters required to ping the endpoint of an LDP tunnel

Contextoam lsp-ping ldp
Treeldp
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Clear all LDP ping session transmit and receive packet counts and all error counts
Contextoam lsp-ping ldp clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
fec prefix (ipv4-prefix | ipv6-prefix)
Description Enter the fec list instance
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix)
Treefec
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the FEC

This is the destination that is being pinged.

Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix)
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
destination-ip (ipv4-address | ipv6-address)
Description

The destination IP address of the UDP/IP MPLS echo request message

This should be a non-forwardable address in the 127/8 address block (or the 0:0:0:0:0:FFFF:7F00:0/104 IPv6 address block). Varying this address can help to exercise different ECMP paths towards the destination. By default, the destination address is selected randomly from these address blocks.

Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-interface-select string
Description

Send the LSP ping messages out the specified subinterface

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those subinterfaces specifically

Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) ecmp-interface-select string
Treeecmp-interface-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-next-hop-select (ipv4-address | ipv6-address)
Description

Send the LSP ping messages to the specified next-hop

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those next-hops specifically

Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) ecmp-next-hop-select (ipv4-address | ipv6-address)
Treeecmp-next-hop-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
interval number
Description The time interval between successive MPLS echo-request messages in case of send-count > 1
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
mpls-ttl number
Description

The TTL value written into the topmost label stack entry of the MPLS echo-request message

This TTL is expected to be decremented at each hop along the path to the destination. If TTL reaches 1 the segment routing packet will be discrded due to TTL expiry and the ping will fail if the destination has not been reached uyet.

Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) mpls-ttl number
Treempls-ttl
Range1 to 255
Default255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-size number
Description The size of the IP packet MPLS echo-request message. Probe size does not include MPLS headers, if any
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) probe-size number
Treeprobe-size
Range1 to 9500
Default1
Unitsbytes
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
send-count number
Description The number of MPLS echo-request messages to be sent in sequence
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) send-count number
Treesend-count
Range1 to 100
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
source-ip (ipv4-address | ipv6-address)
Description

The source IP address of the UDP/IP MPLS echo request message

This should be a routable address of the router. This will be destination of the MPLS echo reply message sent back to the sender. By default this is the system address of the default network-instance; if the default network-instance does not have system interface then it will be primary address of the lowest numbered loopback subinterface of the default network-instace.

Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
timeout number
Description The maximum time the sender waits to receive an MPLS echo-reply message before considering that the ping failed
Contextoam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) timeout number
Treetimeout
Range1 to 60
Default3
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
traffic-class number
Description Enter the traffic-class context
Context oam lsp-ping ldp fec prefix (ipv4-prefix | ipv6-prefix) traffic-class number
Treetraffic-class
Range0 to 7
Default7
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

rsvp-te

Description

Enter the rsvp-te context

Parameters required to ping the endpoint of an RSVP-TE tunnel

Contextoam lsp-ping rsvp-te
Treersvp-te
ConfigurableTrue
Platformsmpls-oam-rsvp-te
clear
Description Clear all RSVP-TE ping session transmit and receive packet counts and all error counts
Contextoam lsp-ping rsvp-te clear
Treeclear
ConfigurableTrue
Platformsmpls-oam-rsvp-te
tunnel tunnel-name string
Description Enter the tunnel list instance
Context oam lsp-ping rsvp-te tunnel tunnel-name string
Treetunnel
ConfigurableTrue
Platformsmpls-oam-rsvp-te
tunnel-name string
Description

The RSVP-TE tunnel name

This is the tunnel that is being pinged.

Contextoam lsp-ping rsvp-te tunnel tunnel-name string
String Length1 to 64
ConfigurableTrue
Platformsmpls-oam-rsvp-te
destination-ip (ipv4-address | ipv6-address)
Description

The destination IP address of the UDP/IP MPLS echo request message

This should be a non-forwardable address in the 127/8 address block (or the 0:0:0:0:0:FFFF:7F00:0/104 IPv6 address block). Varying this address can help to exercise different ECMP paths towards the destination. By default, the destination address is selected randomly from these address blocks.

Contextoam lsp-ping rsvp-te tunnel tunnel-name string destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platformsmpls-oam-rsvp-te
interval number
Description The time interval between successive MPLS echo-request messages in case of send-count > 1
Contextoam lsp-ping rsvp-te tunnel tunnel-name string interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platformsmpls-oam-rsvp-te
mpls-ttl number
Description

The TTL value written into the topmost label stack entry of the MPLS echo-request message

This TTL is expected to be decremented at each hop along the path to the destination. If TTL reaches 1 the segment routing packet will be discrded due to TTL expiry and the ping will fail if the destination has not been reached uyet.

Contextoam lsp-ping rsvp-te tunnel tunnel-name string mpls-ttl number
Treempls-ttl
Range1 to 255
Default255
ConfigurableTrue
Platformsmpls-oam-rsvp-te
path string
Description

The P2P path name within the RSVP-TE tunnel

When not specified, the active path of the tunnel is used.

Contextoam lsp-ping rsvp-te tunnel tunnel-name string path string
Treepath
String Length1 to 64
ConfigurableTrue
Platformsmpls-oam-rsvp-te
probe-size number
Description The size of the IP packet MPLS echo-request message. Probe size does not include MPLS headers, if any
Contextoam lsp-ping rsvp-te tunnel tunnel-name string probe-size number
Treeprobe-size
Range1 to 9500
Default1
Unitsbytes
Configurable True
Platformsmpls-oam-rsvp-te
source-ip (ipv4-address | ipv6-address)
Description

The source IP address of the UDP/IP MPLS echo request message

This should be a routable address of the router. This will be destination of the MPLS echo reply message sent back to the sender. By default this is the system address of the default network-instance; if the default network-instance does not have system interface then it will be primary address of the lowest numbered loopback subinterface of the default network-instace.

Contextoam lsp-ping rsvp-te tunnel tunnel-name string source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platformsmpls-oam-rsvp-te
timeout number
Description The maximum time the sender waits to receive an MPLS echo-reply message before considering that the ping failed
Contextoam lsp-ping rsvp-te tunnel tunnel-name string timeout number
Treetimeout
Range1 to 60
Default3
Unitsseconds
Configurable True
Platformsmpls-oam-rsvp-te

sr-isis

Description

Enter the sr-isis context

Parameters required to ping the endpoint of an SR-ISIS tunnel

Contextoam lsp-ping sr-isis
Treesr-isis
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Clear all SR-ISIS ping session transmit and receive packet counts and all error counts
Contextoam lsp-ping sr-isis clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Description Enter the prefix-sid list instance
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Treeprefix-sid
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the SID

This is the destination that is being pinged.

Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
destination-ip (ipv4-address | ipv6-address)
Description

The destination IP address of the UDP/IP MPLS echo request message

This should be a non-forwardable address in the 127/8 address block (or the 0:0:0:0:0:FFFF:7F00:0/104 IPv6 address block). Varying this address can help to exercise different ECMP paths towards the destination. By default, the destination address is selected randomly from these address blocks.

Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-interface-select string
Description

Send the LSP ping messages out the specified subinterface

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those subinterfaces specifically

Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) ecmp-interface-select string
Treeecmp-interface-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-next-hop-select (ipv4-address | ipv6-address)
Description

Send the LSP ping messages to the specified next-hop

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those next-hops specifically

Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) ecmp-next-hop-select (ipv4-address | ipv6-address)
Treeecmp-next-hop-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
igp-instance number
Description ISIS instance id
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) igp-instance number
Treeigp-instance
Range0 to 255
Default0
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
interval number
Description The time interval between successive MPLS echo-request messages in case of send-count > 1
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
mpls-ttl number
Description

The TTL value written into the topmost label stack entry of the MPLS echo-request message

This TTL is expected to be decremented at each hop along the path to the destination. If TTL reaches 1 the segment routing packet will be discrded due to TTL expiry and the ping will fail if the destination has not been reached uyet.

Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) mpls-ttl number
Treempls-ttl
Range1 to 255
Default255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-size number
Description The size of the IP packet MPLS echo-request message. Probe size does not include MPLS headers, if any
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) probe-size number
Treeprobe-size
Range1 to 9500
Default1
Unitsbytes
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
send-count number
Description The number of MPLS echo-request messages to be sent in sequence
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) send-count number
Treesend-count
Range1 to 100
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
source-ip (ipv4-address | ipv6-address)
Description

The source IP address of the UDP/IP MPLS echo request message

This should be a routable address of the router. This will be destination of the MPLS echo reply message sent back to the sender. By default this is the system address of the default network-instance; if the default network-instance does not have system interface then it will be primary address of the lowest numbered loopback subinterface of the default network-instace.

Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
timeout number
Description The maximum time the sender waits to receive an MPLS echo-reply message before considering that the ping failed
Contextoam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) timeout number
Treetimeout
Range1 to 60
Default3
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
traffic-class number
Description Enter the traffic-class context
Context oam lsp-ping sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) traffic-class number
Treetraffic-class
Range0 to 7
Default7
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

te-policy

Description

Enter the te-policy context

Parameters required to ping the endpoint of a TE-Policy tunnel

Contextoam lsp-ping te-policy
Treete-policy
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
sr-colored
Description Enter the sr-colored context
Context oam lsp-ping te-policy sr-colored
Treesr-colored
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Clear all colored MPLS TE-Policy trace sessions transmit and receive packet counts and all error counts
Contextoam lsp-ping te-policy sr-colored clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local)
Description Enter the policy list instance
Context oam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local)
Treepolicy
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
color number
Description Name of Colored Traffic Engineering Policy to be tested. Any programmed candidate-path can be probed.
Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local)
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local)
Description Colored Traffic Engineering Policy, endpoint IP address.
Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local)
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
destination-ip (ipv4-address | ipv6-address)
Description

The destination IP address of the UDP/IP MPLS echo request message

This should be a non-forwardable address in the 127/8 address block (or the 0:0:0:0:0:FFFF:7F00:0/104 IPv6 address block). Varying this address can help to exercise different ECMP paths towards the destination. By default, the destination address is selected randomly from these address blocks.

Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
discriminator number
Description Candidate path discriminator
Context oam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) discriminator number
Treediscriminator
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-interface-select string
Description

Send the LSP ping messages out the specified subinterface

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those subinterfaces specifically

Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) ecmp-interface-select string
Treeecmp-interface-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-next-hop-select (ipv4-address | ipv6-address)
Description

Send the LSP ping messages to the specified next-hop

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those next-hops specifically

Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) ecmp-next-hop-select (ipv4-address | ipv6-address)
Treeecmp-next-hop-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
interval number
Description The time interval between successive MPLS echo-request messages in case of send-count > 1
Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
mpls-ttl number
Description

The TTL value written into the topmost label stack entry of the MPLS echo-request message

This TTL is expected to be decremented at each hop along the path to the destination. If TTL reaches 1 the segment routing packet will be discrded due to TTL expiry and the ping will fail if the destination has not been reached uyet.

Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) mpls-ttl number
Treempls-ttl
Range1 to 255
Default255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
originator-address (ipv4-address | ipv6-address)
Description IP address Identifier of the node that signalled/instantiated the candidate path on headend
Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) originator-address (ipv4-address | ipv6-address)
Treeoriginator-address
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
originator-asn number
Description Autonomous System (ASN) Identifier of the node that signalled/instantiated the candidate path on headend
Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) originator-asn number
Treeoriginator-asn
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-size number
Description The size of the IP packet MPLS echo-request message. Probe size does not include MPLS headers, if any
Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) probe-size number
Treeprobe-size
Range1 to 9500
Default1
Unitsbytes
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
protocol-origin keyword
Description Instantiation mechanism used to create the candidate path
Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) protocol-origin keyword
Treeprotocol-origin
Options
  • pcep

    PCEP used as signalling mechanism for the candidate path

  • bgp

    BGP used as signalling mechanism for the candidate path

  • local

    Management interface used for candidate path instantiation

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
segment-list-index number
Description Colored Traffic Engineering Policy active segment-list index
Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) segment-list-index number
Treesegment-list-index
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
send-count number
Description The number of MPLS echo-request messages to be sent in sequence
Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) send-count number
Treesend-count
Range1 to 100
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
source-ip (ipv4-address | ipv6-address)
Description

The source IP address of the UDP/IP MPLS echo request message

This should be a routable address of the router. This will be destination of the MPLS echo reply message sent back to the sender. By default this is the system address of the default network-instance; if the default network-instance does not have system interface then it will be primary address of the lowest numbered loopback subinterface of the default network-instace.

Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
timeout number
Description The maximum time the sender waits to receive an MPLS echo-reply message before considering that the ping failed
Contextoam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) timeout number
Treetimeout
Range1 to 60
Default3
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
traffic-class number
Description Enter the traffic-class context
Context oam lsp-ping te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) traffic-class number
Treetraffic-class
Range0 to 7
Default7
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
sr-uncolored
Description Enter the sr-uncolored context
Context oam lsp-ping te-policy sr-uncolored
Treesr-uncolored
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Clear all uncolored MPLS TE-Policy ping session transmit and receive packet counts and all error counts
Contextoam lsp-ping te-policy sr-uncolored clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
policy policy-name string protocol-origin keyword
Description Enter the policy list instance
Context oam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword
Treepolicy
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
policy-name string
Description Name of Uncolored Traffic Engineering Policy to be tested. ny available primary or standby or active secondaty candidate-path can be probed.
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword
String Length1 to 255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
protocol-origin keyword
Description Uncolored Traffic Engrineering Policy, origination source. The method Policy path is computed. This list includes Path Computation Engine, explicitly configured paths, etc.
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword
Options
  • pcep

    PCEP used as signalling mechanism for the candidate path

  • bgp

    BGP used as signalling mechanism for the candidate path

  • local

    Management interface used for candidate path instantiation

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
destination-ip (ipv4-address | ipv6-address)
Description

The destination IP address of the UDP/IP MPLS echo request message

This should be a non-forwardable address in the 127/8 address block (or the 0:0:0:0:0:FFFF:7F00:0/104 IPv6 address block). Varying this address can help to exercise different ECMP paths towards the destination. By default, the destination address is selected randomly from these address blocks.

Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-interface-select string
Description

Send the LSP ping messages out the specified subinterface

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those subinterfaces specifically

Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword ecmp-interface-select string
Treeecmp-interface-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-next-hop-select (ipv4-address | ipv6-address)
Description

Send the LSP ping messages to the specified next-hop

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those next-hops specifically

Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword ecmp-next-hop-select (ipv4-address | ipv6-address)
Treeecmp-next-hop-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
interval number
Description The time interval between successive MPLS echo-request messages in case of send-count > 1
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
mpls-ttl number
Description

The TTL value written into the topmost label stack entry of the MPLS echo-request message

This TTL is expected to be decremented at each hop along the path to the destination. If TTL reaches 1 the segment routing packet will be discrded due to TTL expiry and the ping will fail if the destination has not been reached uyet.

Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword mpls-ttl number
Treempls-ttl
Range1 to 255
Default255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-size number
Description The size of the IP packet MPLS echo-request message. Probe size does not include MPLS headers, if any
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword probe-size number
Treeprobe-size
Range1 to 9500
Default1
Unitsbytes
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
send-count number
Description The number of MPLS echo-request messages to be sent in sequence
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword send-count number
Treesend-count
Range1 to 100
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
source-ip (ipv4-address | ipv6-address)
Description

The source IP address of the UDP/IP MPLS echo request message

This should be a routable address of the router. This will be destination of the MPLS echo reply message sent back to the sender. By default this is the system address of the default network-instance; if the default network-instance does not have system interface then it will be primary address of the lowest numbered loopback subinterface of the default network-instace.

Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
timeout number
Description The maximum time the sender waits to receive an MPLS echo-reply message before considering that the ping failed
Contextoam lsp-ping te-policy sr-uncolored policy policy-name string protocol-origin keyword timeout number
Treetimeout
Range1 to 60
Default3
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

lsp-trace

Description

Enter the lsp-trace context

Perform LSP trace of the path towards the remote endpoint of an MPLS or segment routing tunnel

Contextoam lsp-trace
Treelsp-trace
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

ldp

Description

Enter the ldp context

Parameters required to trace a path towards the endpoint of an LDP tunnel

Contextoam lsp-trace ldp
Treeldp
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Clear all LDP trace session transmit and receive packet counts and all error counts
Contextoam lsp-trace ldp clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
fec prefix (ipv4-prefix | ipv6-prefix)
Description Enter the fec list instance
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix)
Treefec
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the FEC

This is the destination that is being traced.

Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix)
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
destination-ip (ipv4-address | ipv6-address)
Description

The destination IP address of the UDP/IP MPLS trace message

This should be a non-forwardable address in the 127/8 address block (or the 0:0:0:0:0:FFFF:7F00:0/104 IPv6 address block). Varying this address can help to exercise different ECMP paths towards the destination. By default, the destination address is selected randomly from these address blocks.

Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-interface-select string
Description

Send the LSP trace messages out the specified subinterface

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those subinterfaces specifically

Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) ecmp-interface-select string
Treeecmp-interface-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-next-hop-select (ipv4-address | ipv6-address)
Description

Send the LSP trace messages to the specified next-hop

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those next-hops specifically

Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) ecmp-next-hop-select (ipv4-address | ipv6-address)
Treeecmp-next-hop-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
interval number
Description The time interval between successive MPLS trace messages while incrementing the TTL
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
maximum-failures number
Description The maximum number of consecutive MPLS trace requests that do not receive a reply before the trace operation fails for a given TTL
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) maximum-failures number
Treemaximum-failures
Range1 to 255
Default5
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
maximum-mpls-ttl number
Description The maximum or final TTL value of the MPLS trace messages
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) maximum-mpls-ttl number
Treemaximum-mpls-ttl
Range1 to 255
Default30
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
minimum-mpls-ttl number
Description The minimum or starting TTL value of the MPLS trace messages
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) minimum-mpls-ttl number
Treeminimum-mpls-ttl
Range1 to 255
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-count number
Description The maximum number of MPLS trace messages sent per hop
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) probe-count number
Treeprobe-count
Range1 to 10
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-size number
Description The size of the IP packet MPLS trace message. Probe size does not include MPLS headers, if any
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) probe-size number
Treeprobe-size
Range1 to 9500
Default1
Unitsbytes
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
source-ip (ipv4-address | ipv6-address)
Description

The source IP address of the UDP/IP MPLS trace message

This should be a routable address of the router. This will be destination of the MPLS echo reply message sent back to the sender. By default this is the system address of the default network-instance; if the default network-instance does not have system interface then it will be primary address of the lowest numbered loopback subinterface of the default network-instace.

Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
timeout number
Description The maximum time the sender waits to receive an MPLS trace message before considering that the ping failed
Contextoam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) timeout number
Treetimeout
Range1 to 60
Default3
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
traffic-class number
Description Enter the traffic-class context
Context oam lsp-trace ldp fec prefix (ipv4-prefix | ipv6-prefix) traffic-class number
Treetraffic-class
Range0 to 7
Default7
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

rsvp-te

Description

Enter the rsvp-te context

Parameters required to trace a path towards the endpoint of an RSVP-TE tunnel

Contextoam lsp-trace rsvp-te
Treersvp-te
ConfigurableTrue
Platformsmpls-oam-rsvp-te
clear
Description Clear all RSVP-TE trace session transmit and receive packet counts and all error counts
Contextoam lsp-trace rsvp-te clear
Treeclear
ConfigurableTrue
Platformsmpls-oam-rsvp-te
tunnel tunnel-name string
Description Enter the tunnel list instance
Context oam lsp-trace rsvp-te tunnel tunnel-name string
Treetunnel
ConfigurableTrue
Platformsmpls-oam-rsvp-te
tunnel-name string
Description

The RSVP-TE tunnel name

This is the tunnel that is being traced.

Contextoam lsp-trace rsvp-te tunnel tunnel-name string
String Length1 to 64
ConfigurableTrue
Platformsmpls-oam-rsvp-te
destination-ip (ipv4-address | ipv6-address)
Description

The destination IP address of the UDP/IP MPLS trace message

This should be a non-forwardable address in the 127/8 address block (or the 0:0:0:0:0:FFFF:7F00:0/104 IPv6 address block). Varying this address can help to exercise different ECMP paths towards the destination. By default, the destination address is selected randomly from these address blocks.

Contextoam lsp-trace rsvp-te tunnel tunnel-name string destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platformsmpls-oam-rsvp-te
interval number
Description The time interval between successive MPLS trace messages while incrementing the TTL
Contextoam lsp-trace rsvp-te tunnel tunnel-name string interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platformsmpls-oam-rsvp-te
path string
Description

The P2P path name within the RSVP-TE tunnel

When not specified, the active path of the tunnel is used.

Contextoam lsp-trace rsvp-te tunnel tunnel-name string path string
Treepath
String Length1 to 64
ConfigurableTrue
Platformsmpls-oam-rsvp-te
probe-size number
Description The size of the IP packet MPLS trace message. Probe size does not include MPLS headers, if any
Contextoam lsp-trace rsvp-te tunnel tunnel-name string probe-size number
Treeprobe-size
Range1 to 9500
Default1
Unitsbytes
Configurable True
Platformsmpls-oam-rsvp-te
source-ip (ipv4-address | ipv6-address)
Description

The source IP address of the UDP/IP MPLS trace message

This should be a routable address of the router. This will be destination of the MPLS echo reply message sent back to the sender. By default this is the system address of the default network-instance; if the default network-instance does not have system interface then it will be primary address of the lowest numbered loopback subinterface of the default network-instace.

Contextoam lsp-trace rsvp-te tunnel tunnel-name string source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platformsmpls-oam-rsvp-te
timeout number
Description The maximum time the sender waits to receive an MPLS trace message before considering that the ping failed
Contextoam lsp-trace rsvp-te tunnel tunnel-name string timeout number
Treetimeout
Range1 to 60
Default3
Unitsseconds
Configurable True
Platformsmpls-oam-rsvp-te

sr-isis

Description

Enter the sr-isis context

Parameters required to trace a path towards the endpoint of an SR-ISIS tunnel

Contextoam lsp-trace sr-isis
Treesr-isis
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Clear all SR-ISIS trace session transmit and receive packet counts and all error counts
Contextoam lsp-trace sr-isis clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Description Enter the prefix-sid list instance
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
Treeprefix-sid
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
prefix (ipv4-prefix | ipv6-prefix)
Description

The IPv4 or IPv6 prefix associated with the SID

This is the destination that is being traced.

Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix)
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
destination-ip (ipv4-address | ipv6-address)
Description

The destination IP address of the UDP/IP MPLS trace message

This should be a non-forwardable address in the 127/8 address block (or the 0:0:0:0:0:FFFF:7F00:0/104 IPv6 address block). Varying this address can help to exercise different ECMP paths towards the destination. By default, the destination address is selected randomly from these address blocks.

Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-interface-select string
Description

Send the LSP trace messages out the specified subinterface

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those subinterfaces specifically

Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) ecmp-interface-select string
Treeecmp-interface-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-next-hop-select (ipv4-address | ipv6-address)
Description

Send the LSP trace messages to the specified next-hop

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those next-hops specifically

Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) ecmp-next-hop-select (ipv4-address | ipv6-address)
Treeecmp-next-hop-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
igp-instance number
Description ISIS instance id
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) igp-instance number
Treeigp-instance
Range0 to 255
Default0
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
interval number
Description The time interval between successive MPLS trace messages while incrementing the TTL
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
maximum-failures number
Description The maximum number of consecutive MPLS trace requests that do not receive a reply before the trace operation fails for a given TTL
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) maximum-failures number
Treemaximum-failures
Range1 to 255
Default5
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
maximum-mpls-ttl number
Description The maximum or final TTL value of the MPLS trace messages
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) maximum-mpls-ttl number
Treemaximum-mpls-ttl
Range1 to 255
Default30
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
minimum-mpls-ttl number
Description The minimum or starting TTL value of the MPLS trace messages
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) minimum-mpls-ttl number
Treeminimum-mpls-ttl
Range1 to 255
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-count number
Description The maximum number of MPLS trace messages sent per hop
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) probe-count number
Treeprobe-count
Range1 to 10
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-size number
Description The size of the IP packet MPLS trace message. Probe size does not include MPLS headers, if any
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) probe-size number
Treeprobe-size
Range1 to 9500
Default1
Unitsbytes
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
source-ip (ipv4-address | ipv6-address)
Description

The source IP address of the UDP/IP MPLS trace message

This should be a routable address of the router. This will be destination of the MPLS echo reply message sent back to the sender. By default this is the system address of the default network-instance; if the default network-instance does not have system interface then it will be primary address of the lowest numbered loopback subinterface of the default network-instace.

Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
timeout number
Description The maximum time the sender waits to receive an MPLS trace message before considering that the ping failed
Contextoam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) timeout number
Treetimeout
Range1 to 60
Default3
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
traffic-class number
Description Enter the traffic-class context
Context oam lsp-trace sr-isis prefix-sid prefix (ipv4-prefix | ipv6-prefix) traffic-class number
Treetraffic-class
Range0 to 7
Default7
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

te-policy

Description

Enter the te-policy context

Parameters required to trace the endpoint of a TE-Policy tunnel

Contextoam lsp-trace te-policy
Treete-policy
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
sr-colored
Description Enter the sr-colored context
Context oam lsp-trace te-policy sr-colored
Treesr-colored
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Clear all colored MPLS TE-Policy trace sessions transmit and receive packet counts and all error counts
Contextoam lsp-trace te-policy sr-colored clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local)
Description Enter the policy list instance
Context oam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local)
Treepolicy
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
color number
Description Name of Colored Traffic Engineering Policy to be traced. Any programmed candidate-path can be traced.
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local)
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local)
Description Colored Traffic Engineering Policy, endpoint IP address.
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local)
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
destination-ip (ipv4-address | ipv6-address)
Description

The destination IP address of the UDP/IP MPLS trace message

This should be a non-forwardable address in the 127/8 address block (or the 0:0:0:0:0:FFFF:7F00:0/104 IPv6 address block). Varying this address can help to exercise different ECMP paths towards the destination. By default, the destination address is selected randomly from these address blocks.

Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
discriminator number
Description Candidate path discriminator
Context oam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) discriminator number
Treediscriminator
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-interface-select string
Description

Send the LSP trace messages out the specified subinterface

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those subinterfaces specifically

Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) ecmp-interface-select string
Treeecmp-interface-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-next-hop-select (ipv4-address | ipv6-address)
Description

Send the LSP trace messages to the specified next-hop

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those next-hops specifically

Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) ecmp-next-hop-select (ipv4-address | ipv6-address)
Treeecmp-next-hop-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
interval number
Description The time interval between successive MPLS trace messages while incrementing the TTL
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
maximum-failures number
Description The maximum number of consecutive MPLS trace requests that do not receive a reply before the trace operation fails for a given TTL
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) maximum-failures number
Treemaximum-failures
Range1 to 255
Default5
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
maximum-mpls-ttl number
Description The maximum or final TTL value of the MPLS trace messages
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) maximum-mpls-ttl number
Treemaximum-mpls-ttl
Range1 to 255
Default30
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
minimum-mpls-ttl number
Description The minimum or starting TTL value of the MPLS trace messages
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) minimum-mpls-ttl number
Treeminimum-mpls-ttl
Range1 to 255
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
originator-address (ipv4-address | ipv6-address)
Description IP address Identifier of the node that signalled/instantiated the candidate path on headend
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) originator-address (ipv4-address | ipv6-address)
Treeoriginator-address
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
originator-asn number
Description Autonomous System (ASN) Identifier of the node that signalled/instantiated the candidate path on headend
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) originator-asn number
Treeoriginator-asn
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-count number
Description The maximum number of MPLS trace messages sent per hop
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) probe-count number
Treeprobe-count
Range1 to 10
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-size number
Description The size of the IP packet MPLS trace message. Probe size does not include MPLS headers, if any
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) probe-size number
Treeprobe-size
Range1 to 9500
Default1
Unitsbytes
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
protocol-origin keyword
Description Instantiation mechanism used to create the candidate path
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) protocol-origin keyword
Treeprotocol-origin
Options
  • pcep

    PCEP used as signalling mechanism for the candidate path

  • bgp

    BGP used as signalling mechanism for the candidate path

  • local

    Management interface used for candidate path instantiation

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
segment-list-index number
Description Colored Traffic Engineering Policy active segment-list index
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) segment-list-index number
Treesegment-list-index
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
source-ip (ipv4-address | ipv6-address)
Description

The source IP address of the UDP/IP MPLS trace message

This should be a routable address of the router. This will be destination of the MPLS echo reply message sent back to the sender. By default this is the system address of the default network-instance; if the default network-instance does not have system interface then it will be primary address of the lowest numbered loopback subinterface of the default network-instace.

Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
timeout number
Description The maximum time the sender waits to receive an MPLS trace message before considering that the ping failed
Contextoam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) timeout number
Treetimeout
Range1 to 60
Default3
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
traffic-class number
Description Enter the traffic-class context
Context oam lsp-trace te-policy sr-colored policy color number endpoint (ipv4-address-unicast | ipv6-address-unicast-without-local) traffic-class number
Treetraffic-class
Range0 to 7
Default7
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
sr-uncolored
Description Enter the sr-uncolored context
Context oam lsp-trace te-policy sr-uncolored
Treesr-uncolored
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Clear all uncolored MPLS TE-Policy trace session transmit and receive packet counts and all error counts
Contextoam lsp-trace te-policy sr-uncolored clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
policy policy-name string protocol-origin keyword
Description Enter the policy list instance
Context oam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword
Treepolicy
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
policy-name string
Description Name of Uncolored Traffic Engineering Policy which is to be traced. Any available primary or standby or active secondaty candidate-path can be traced.
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword
String Length1 to 255
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
protocol-origin keyword
Description Uncolored Traffic Engrineering Policy, origination source. The method Policy path is computed. This list includes Path Computation Engine, explicitly configured paths, etc.
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword
Options
  • pcep

    PCEP used as signalling mechanism for the candidate path

  • bgp

    BGP used as signalling mechanism for the candidate path

  • local

    Management interface used for candidate path instantiation

ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
destination-ip (ipv4-address | ipv6-address)
Description

The destination IP address of the UDP/IP MPLS trace message

This should be a non-forwardable address in the 127/8 address block (or the 0:0:0:0:0:FFFF:7F00:0/104 IPv6 address block). Varying this address can help to exercise different ECMP paths towards the destination. By default, the destination address is selected randomly from these address blocks.

Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword destination-ip (ipv4-address | ipv6-address)
Treedestination-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-interface-select string
Description

Send the LSP trace messages out the specified subinterface

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those subinterfaces specifically

Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword ecmp-interface-select string
Treeecmp-interface-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
ecmp-next-hop-select (ipv4-address | ipv6-address)
Description

Send the LSP trace messages to the specified next-hop

If this router has multiple ECMP next-hops to the endpoint of the MPLS tunnel this can select one of those next-hops specifically

Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword ecmp-next-hop-select (ipv4-address | ipv6-address)
Treeecmp-next-hop-select
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
interval number
Description The time interval between successive MPLS trace messages while incrementing the TTL
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword interval number
Treeinterval
Range1 to 10
Default1
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
maximum-failures number
Description The maximum number of consecutive MPLS trace requests that do not receive a reply before the trace operation fails for a given TTL
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword maximum-failures number
Treemaximum-failures
Range1 to 255
Default5
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-count number
Description The maximum number of MPLS trace messages sent per hop
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword probe-count number
Treeprobe-count
Range1 to 10
Default1
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
probe-size number
Description The size of the IP packet MPLS trace message. Probe size does not include MPLS headers, if any
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword probe-size number
Treeprobe-size
Range1 to 9500
Default1
Unitsbytes
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
source-ip (ipv4-address | ipv6-address)
Description

The source IP address of the UDP/IP MPLS trace message

This should be a routable address of the router. This will be destination of the MPLS echo reply message sent back to the sender. By default this is the system address of the default network-instance; if the default network-instance does not have system interface then it will be primary address of the lowest numbered loopback subinterface of the default network-instace.

Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword source-ip (ipv4-address | ipv6-address)
Treesource-ip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
timeout number
Description The maximum time the sender waits to receive an MPLS trace message before considering that the ping failed
Contextoam lsp-trace te-policy sr-uncolored policy policy-name string protocol-origin keyword timeout number
Treetimeout
Range1 to 60
Default3
Unitsseconds
Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

performance-monitoring

Description OAM Performance Monitoring
Context oam performance-monitoring
Treeperformance-monitoring
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

ethcfm

Description OAM-PM ETH-CFM on-demand tools
Context oam performance-monitoring ethcfm
Treeethcfm
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
session session-name string
Description Enter the session list instance
Context oam performance-monitoring ethcfm session session-name string
Treesession
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
session-name string
Description Enter the session-name context
Context oam performance-monitoring ethcfm session session-name string
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Enter the clear context
Context oam performance-monitoring ethcfm session session-name string clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
on-demand-action keyword
Description Action required to start and stop an OAM-PM on-demand session
Contextoam performance-monitoring ethcfm session session-name string on-demand-action keyword
Treeon-demand-action
Options
  • start

  • stop

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

ip

Description OAM-PM IP on-demand tools
Context oam performance-monitoring ip
Treeip
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
session session-name string
Description Enter the session list instance
Context oam performance-monitoring ip session session-name string
Treesession
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
session-name string
Description Enter the session-name context
Context oam performance-monitoring ip session session-name string
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Enter the clear context
Context oam performance-monitoring ip session session-name string clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
on-demand-action keyword
Description Action required to start and stop an OAM-PM on-demand session
Contextoam performance-monitoring ip session session-name string on-demand-action keyword
Treeon-demand-action
Options
  • start

  • stop

Configurable True
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

service-activation-testhead

Description Enable the service-activation-testhead context
Contextoam service-activation-testhead
Treeservice-activation-testhead
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

clear

Description Clear all service activation testhead results
Contextoam service-activation-testhead clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

service-test test-name string

Description List of service tests
Context oam service-activation-testhead service-test test-name string
Treeservice-test
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
test-name string
Description Service activation test name
Context oam service-activation-testhead service-test test-name string
String Length1 to 64
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description

Clear all or specific service test run results

When run number omitted all run results are cleared.

Contextoam service-activation-testhead service-test test-name string clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
run number
Description Clear a specific service test run result
Contextoam service-activation-testhead service-test test-name string clear run number
Treerun
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
start
Description Start new run of the service test with given test name
Contextoam service-activation-testhead service-test test-name string start
Treestart
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
stop
Description Stop current run of the service test with given test name
Contextoam service-activation-testhead service-test test-name string stop
Treestop
ConfigurableTrue
Platforms7250 IXR-10, 7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

twamp

Description Enable the twamp context
Context oam twamp
Treetwamp
ConfigurableTrue
Platforms7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP

server

Description Enter the server context
Context oam twamp server
Treeserver
ConfigurableTrue
Platforms7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
network-instance name string
Description Enter the network-instance list instance
Contextoam twamp server network-instance name string
Treenetwork-instance
ConfigurableTrue
Platforms7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
name string
Description Enter the name context
Context oam twamp server network-instance name string
ConfigurableTrue
Platforms7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP
clear
Description Clear all TWAMP test session transmit and receive packet counts and all error counts
Contextoam twamp server network-instance name string clear
Treeclear
ConfigurableTrue
Platforms7250 IXR-10e-gen2cp, 7250 IXR-10e-gen3, 7250 IXR-18e-gen3, 7250 IXR-6e-gen2cp, 7250 IXR-6e-gen3, 7250 IXR-X1B, 7250 IXR-X3B, 7250 IXR-X4, 7250 IXR-X4-OSFP