Label assignments to fabric intent elements

You can assign labels from the Label Factory to various fabric elements. You can assign Nokia pre-defined labels, user-configured labels, or a combination of both. Labels can be assigned to a specific fabric intents, or to specific elements within each intent.

Multiple labels can be associated with a single fabric element. They can also be applied to real or planned nodes in a fabric.

After a label has been assigned to a fabric element, you can also remove it.

Assigning labels to a fabric intent

When you assign a label to an intent, the individual elements that make up the intent do not inherit the label. These elements can each be assigned their own labels separately.

Follow this procedure to assign labels found in the Label Factory to a specific fabric intent.

  1. Open a fabric intent as described in Viewing a fabric intent.
  2. On the High Level Intent panel, click from under the Labels header.
    Figure 1. Assigning a label to a fabric intent
  3. From the list of labels, choose one or more labels to assign to the fabric intent. Click from the left end of the row for each label you want to add.
  4. Click SAVE.

Assigning a label to a specific node in a fabric intent

Follow this procedure to assign labels found in the Label Factory to specific nodes in a fabric intent.
  1. Open a fabric intent as described in Viewing a fabric intent.
  2. Right-click a node in the cable diagram.

    You may have to expand a cluster to find a specific node. See Groups.

  3. Select Edit Labels.
    Figure 2. Assigning a label to a specific node
  4. From the list of labels, choose one or more labels to assign to the fabric intent. Click the from the left end of the row for each label you want to add.
  5. Click SAVE.

Assigning labels to a fabric link

Follow this procedure to assign labels from the Label Factory to specific fabric links within the intent.
  1. Open a fabric intent as described in Viewing a fabric intent.
  2. Select Fabric Links from the drop-down list.
  3. For a specific fabric link, click the options menu at the right end of the row.
  4. Select Edit Labels.
  5. From the list of labels, choose one or more labels to assign to the fabric link. Click from the left end of the row for each label you want to add.
  6. Click SAVE.

Assigning labels to an edge link interface

You can assign labels from the Label Factory to specific edge link interfaces or LAGs within a fabric intent. Edge link interfaces must be labeled using the "Edge-Link" label key. You can create specific labels for edge link interfaces, apply the labels, then reference these labeled items when creating a workload intent sub-interface via the label assignment; see Adding sub-interfaces to the workload intent.

To assign a label to an edge link interface, you must first deploy the fabric intent.

Follow this procedure to assign a label to an edge link interface:

  1. Open a fabric intent as described in Viewing a fabric intent.
  2. Select Edge-Links from the drop-down list.
  3. For a specific item in the list, click the options menu at the right end of the row.
  4. Select Edit Labels.
  5. From the list of labels, choose one or more labels to assign to the edge link port. Click from the left end of the row for each label you want to add.
    Only labels with the "Edge-Link" label key are displayed.
  6. Click SAVE.

Removing a label assigned to a fabric intent

Follow this procedure to remove labels assigned to a fabric intent.
  1. Open a fabric intent as described in Viewing a fabric intent.
  2. On the High Level Intent panel, click from the Labels section.
    The Label Picker dialog opens. The currently assigned labels are displayed in the top of the dialog.
  3. From the assigned labels displayed, click the next to the label you want to remove from the fabric intent.
    You can do this for one or more labels.
  4. Click SAVE.

Removing a label assigned to a node in a fabric intent

Follow this procedure to remove labels assigned to node in a fabric intent.
  1. Open a fabric intent as described in Viewing a fabric intent.
  2. Right-click a node in the cable diagram.
  3. Select Edit Labels.
    The Label Picker dialog opens. The currently assigned labels are displayed in the top of the dialog.
  4. From the assigned labels displayed, click the next to the label you want to remove from the fabric intent.
    You can do this for one or more labels.
  5. Click SAVE.

Removing a label assigned to a fabric link

Follow this procedure to remove labels assigned to a fabric link.
  1. Open a fabric intent as described in Viewing a fabric intent.
  2. Select Fabric Links from the drop-down list.
  3. For a specific fabric link, click the options menu at the right end of the row.
  4. Select Edit Labels.
    The Label Picker dialog opens. The currently assigned labels are displayed in the top of the dialog.
  5. From the assigned labels displayed, click the next to one or more labels you want to remove from the fabric link.
  6. Click SAVE.

Removing a label assigned to an edge link interface

Follow this procedure to remove labels assigned to an edge link interface.
  1. Open a fabric intent as described in Viewing a fabric intent.
  2. Select Edge-Links from the drop-down list.
  3. For a specific item in the list, click the options menu at the right end of the row.
  4. Select Edit Labels.
    The Label Picker dialog opens. The currently assigned labels are displayed in the top of the dialog.
  5. From the assigned labels displayed, click the next to one or more labels you want to remove from the edge link port.
  6. Click SAVE.