7705 SAR Services Configuration Process

The following table lists the tasks that are required to configure subscriber services.

This guide is presented in an overall logical configuration flow. Each section describes a software area and provides CLI syntax and command usage to configure parameters for a functional area.

Table 1. Configuration Process
Area	Task/Description	Reference
Global entities	Configure global entities	Configuring Global Service Entities with CLI
VLL services	Apipe service	ATM VLL (Apipe) Services
	Cpipe service	Circuit Emulation VLL (Cpipe) Services
	Epipe service	Ethernet VLL (Epipe) Services
	Fpipe service	Frame Relay VLL (Fpipe) Services
	Hpipe service	HDLC VLL (Hpipe) Services
	Ipipe service	IP Interworking VLL (Ipipe) Services
VPLS service	Configure VPLS service	VPLS
Internet Enhanced Service	Configure a routed-IP connectivity or Internet access service and configure in-band management of the 7705 SAR over ATM links	Internet Enhanced Service
VPRN	Configure a Layer 3 multipoint-to-multipoint VPN service as defined in RFC 2547bis	VPRN Services
IPSec	Configure IPSec service	IPSec
Network group encryption	Configure network group encryption	Network Group Encryption
Ethernet Virtual Private Networks	Configure EVPN, which allows VPLS services to be operated as IP-VPNs	Ethernet Virtual Private Networks
Reference	List of security and telecom standards, supported protocols, and proprietary MIBs	Supported Standards and Protocols