e Commands

ecmp

ecmp

Syntax

ecmp

Context

[Tree] (show>router ecmp)

Full Context

show router ecmp

Description

This command displays the ECMP settings for the router.

Platforms

All

Output

The following output is an example of ECMP settings information, and ECMP Fields describes the output fields for the router ECMP settings.

Output Example
A:ALA-A# show router ecmp
===============================================================================
Router ECMP                                                                    
===============================================================================
Instance       Router Name                      ECMP    Configured-ECMP-Routes 
-------------------------------------------------------------------------------
1              Base                             True    8                      
===============================================================================
A:ALA-A#
*A:Dut-C# show router ecmp 

===============================================================================
Router ECMP
===============================================================================
Instance       Router Name                      ECMP    Max-ECMP-   Weight ECMP
                                                        Rtes        
-------------------------------------------------------------------------------
1              Base                             True    32          True
===============================================================================
Table 1. ECMP Fields

Label

Description

Instance

The router instance number

Router Name

The name of the router instance

ECMP

False — ECMP is disabled for the instance

True — ECMP is enabled for the instance

Configured-ECMP-Routes

The number of ECMP routes configured for path sharing

edit-ipoe-session

edit-ipoe-session

Syntax

edit-ipoe-session sap sap-id mac mac-address [ subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [ inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [app-profile-string app-profile-string] [ circuit-id circuit-id] [remote-id remote-id]

Context

[Tree] (tools>perform>subscr-mgmt edit-ipoe-session)

Full Context

tools perform subscriber-mgmt edit-ipoe-session

Description

This command updates the data of the IPoE session identified with the given MAC address and SAP identifier. Optionally the remote ID and circuit ID can be specified to identify the IPoE session to update.

Note:

The changes take effect immediately.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

edit-lease-state

edit-lease-state

Syntax

edit-lease-state sap sap-id ip ip-address [ mac ieee-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [ sla-profile-string sla-profile-string] [app-profile-string [ app-profile-string] [inter-dest-id intermediate-destination-id] [ ancp-string ancp-string]

edit-lease-state svc-id service-id ip ip-address [ mac ieee-address] [ subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [app-profile-string [ app-profile-string] [inter-dest-id intermediate-destination-id] [ ancp-string ancp-string]

Context

[Tree] (tools>perform>subscr-mgmt edit-lease-state)

Full Context

tools perform subscriber-mgmt edit-lease-state

Description

This command provides the parameters to edit lease state information.

Parameters

sap-id

Specifies the physical port identifier portion of the SAP definition.

ip-address

Modifies lease state information for the specified IP address.

ieee-address

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.

sub-ident-string

Modifies the lease state information for the specified subscriber identification.

sub-profile-string

Modifies lease state information for the specified subscriber profile.

sla-profile-string

Modifies lease state information for the specified SLA profile.

service-id

Modifies lease state information for the specified service ID.

Values

service-id:

1 to 2147483647

svc-name:

64 characters maximum

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

edit-ppp-session

edit-ppp-session

Syntax

edit-ppp-session sap sap-id [user-name user-name] [ mac mac-address] [session-id session-id] [ ip-address ip-address] [subscriber sub-ident-string] [ sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ ancp-string ancp-string] [app-profile-string app-profile-string]

edit-ppp-session svc service-id [user-name user-name] [mac mac-address] [session-id session-id] [ip-address ip-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [ sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [ app-profile-string app-profile-string]

Context

[Tree] (tools>perform>subscr-mgmt edit-ppp-session)

Full Context

tools perform subscriber-mgmt edit-ppp-session

Description

This command updates the data of the PPP session identified with the given MAC address and SAP identifier. Optionally the remote-id and circuit-id can be specified to identify the IPoE session to update.

Note:

The changes take immediate effect.

Parameters

sap-id

Specifies a SAP ID, up to 255 characters.

user-name

Specifies the PPP user name, up to 253 characters.

mac-address

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

session-id

Specifies information about the ID of the PPP session.

Values

1 to 65535

sub-ident-string

Specifies an existing subscriber identification profile.

sla-profile-string

Identifies the SLA profile string up, to 16 characters.

ip-address

Specifies the peer’s IP address.

service-id

Specifies an existing subscriber service ID.

Values

1 to 2147483647

sub-profile-string

Specifies the subscriber profile string, up to 16 characters.

sub-profile-name

Specifies the subscriber profile name, up to 32 characters.

intermediate-destination-id

Specifies the intermediate destination identifier which is encoded in the identification strings, up to 32 characters.

ancp-string

Specifies the ASCII representation of the string, up to 63 characters.

app-profile-string

Specifies the application profile string, up to 16 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

edit-slaac-host

edit-slaac-host

Syntax

edit-slaac-host sap sap-id [user-name user-name] [ mac mac-address] [session-id session-id] [ ip-address ip-address] [subscriber sub-ident-string] [ sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ ancp-string ancp-string] [app-profile-string app-profile-string]

edit-slaac-host svc service-id [user-name user-name] [mac mac-address] [session-id session-id] [ip-address ip-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [ sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [ app-profile-string app-profile-string]

Context

[Tree] (tools>perform>subscr-mgmt edit-slaac-host)

Full Context

tools perform subscriber-mgmt edit-slaac-host

Description

This command updates the data of the SLAAC host information.

Parameters

sap-id

Specifies a SAP ID, up to 255 characters.

user-name

Specifies the PPP user name up to 253 characters.

mac-address

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

session-id

Specifies information about the ID of the PPP session.

Values

1 to 65535

sub-ident-string

Specifies an existing subscriber identification profile.

sla-profile-string

Identifies the SLA profile string up to 16 characters.

ip-address

Specifies the peer’s IP address.

service-id

Specifies an existing subscriber service ID.

Values

1 to 2147483647

sub-profile-string

Specifies the subscriber profile string up to 16 characters.

sub-profile-name

Specifies the subscriber profile name up to 32 characters.

intermediate-destination-id

Specifies the intermediate destination identifier which is encoded in the identification strings up to 32 characters.

ancp-string

Specifies the ASCII representation of the up to 63 characters.

app-profile-string

Specifies the application profile string up to 16 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

efm-oam

efm-oam

Syntax

efm-oam

Context

[Tree] (show>system>ethernet efm-oam)

Full Context

show system ethernet efm-oam

Description

This command displays a system-level summary for EFM-OAM enabled ports. It includes the configuration, action, various states, and soft reset precedence for the protocol.

Platforms

All

Output

The following output is an example of EFM-OAM summary information.

Output Example
show system ethernet efm-oam
===============================================================================
System Configuration
===============================================================================
Grace Tx Enable              : False
Dying Gasp On Reset          : Disabled
===============================================================================
Active Port Configuration & State Summary
===============================================================================
Fault Header:
  LinkMonitor: F = Frame, FP = Period, FS = Summary, SP = Symbol
  LocalSfAct : CE = Critical, DG = Dying Gasp, EV = Event, PT = Port
  PeerRDIRx  : CE = Critical, DG = Dying Gasp, LF = Link, EV = Event
  Table Legend
  - = Not Configured, c = Configured, * = SF Active, s = Shutdown, l = Log Only
Soft Reset Header:
  Gasp :  T = True, F = False  (A = active, I = inactive)
  Grace:  T = True, F = False  (A = active, I = inactive)
  SR (Action on Soft Reset):  - = None, DG = Dying Gasp, G = Grace TLV
TF (Trigger-Fault):
  - = Not configured, DG = Dying Gasp,  CE = Critical Event
============================================================================
Port        States  LinkMonitor LocalSfAct    PeerRdiRx     SoftReset    TF
            EFM LM  F FP FS SP  CE DG EV PT  CE DG LF EV  Gasp Grace SR
----------------------------------------------------------------------------
1/1/1       Up  Dn  - -  -  -   -  -  -  s   s  s  s  l   T(I) T(I)  -   -
1/1/6       Dn  Dn  - -  -  -   -  -  -  s   s  s  s  l   T(I) T(I)  -   -
----------------------------------------------------------------------------
No. of ports EFM enabled: 2
============================================================================

efm-oam

Syntax

efm-oam

Context

[Tree] (clear>port>ethernet efm-oam)

Full Context

clear port ethernet efm-oam

Description

This command clears EFM-OAM statistics on the port.

Platforms

All

efm-oam

Syntax

efm-oam

Context

[Tree] (show>port>ethernet efm-oam)

Full Context

show port ethernet efm-oam

Description

This command displays EFM-OAM information.

Platforms

All

egress-if

egress-if

Syntax

egress-if port-id [summary | detail] [family]

Context

[Tree] (show>router>ldp>bindings>active egress-if)

Full Context

show router ldp bindings active egress-if

Description

This command displays LDP active bindings by matching the egress interface.

Parameters

port-id

Specifies the port ID.

Values

slot[/mda[/port]] or slot/mda/port [.channel]

aps-id

aps-group-id[.channel]

aps

keyword

group-id

1 to 128

eth-sat-id

esat-id[/slot/[u]port]

esat

keyword

id

1 to 20

u

keyword for up-link port

tdm-sat-id

tsat-id[/slot/[u]port. channel]

tsat

keyword

id

1 to 20

u

keyword for up-link port

pxc-id

pxc-id.sub-port

pxc

keyword

id

1 to 64

sub-port

a to b

family

Specifies the address family.

Values

ipv4, ipv6

Platforms

All

egress-label

egress-label

Syntax

egress-label start-label [end-label]

Context

[Tree] (show>service egress-label)

Full Context

show service egress-label

Description

This command displays service information using the range of egress labels.

If only the mandatory egress-label1 parameter is specified, only services using the specified label are displayed.

If both start-label and end-label parameters are specified, the services using the range of labels X where start-label <= X <= end-label are displayed.

Use the show router ldp bindings command to display dynamic labels.

Parameters

start-label

The starting egress label value for the label range. If only start-label is specified, services only using start-label are displayed.

Values

0,18432 to 524287

end-label

The ending egress label value for the label range.

Default

The start-label value.

Values

18432 to 524287

Platforms

All

Output

The following output is an example of service egress label information.

Output Example

*A:ALA-12# show service egress-label 0 10000
==============================================================================
Martini Service Labels                                                         
==============================================================================
Svc Id     Sdp Id             Type I.Lbl        E.Lbl                          
------------------------------------------------------------------------------
1          10:1               Mesh 0            0                              
1          20:1               Mesh 0            0                              
1          30:1               Mesh 0            0                              
1          100:1              Mesh 0            0                              
...
1          107:1              Mesh 0            0                              
1          108:1              Mesh 0            0                              
1          300:1              Mesh 0            0                              
1          301:1              Mesh 0            0                              
1          302:1              Mesh 0            0                              
1          400:1              Mesh 0            0                              
1          500:2              Spok 131070       2001                           
1          501:1              Mesh 131069       2000                           
100        300:100            Spok 0            0                              
200        301:200            Spok 0            0                              
300        302:300            Spok 0            0                              
400        400:400            Spok 0            0                              
------------------------------------------------------------------------------
Number of Bindings Found : 23                                                  
==============================================================================
*A:ALA-12#

Show Service Egress Command Output Fields describes show service egress label output fields.

Table 2. Show Service Egress Command Output Fields

Label

Description

Svc Id

The ID that identifies a service.

Sdp Id

The ID that identifies an SDP.

Type

Indicates whether the SDP binding is a spoke or a mesh.

I. Lbl

The VC label used by the far-end device to send packets to this device in this service by the SDP.

E. Lbl

The VC label used by this device to send packets to the far-end device in this service by the SDP.

Number of bindings found

The total number of SDP bindings that exist within the specified egress label range.

egress-lsp

egress-lsp

Syntax

egress-lsp tunnel-id [summary | detail] [family]

Context

[Tree] (show>router>ldp>bindings>active egress-lsp)

Full Context

show router ldp bindings active egress-lsp

Description

This command displays LDP active bindings by matching the egress LSP.

Parameters

tunnel-id

Specifies the tunnel ID.

Values

0 to 4294967295

family

Specifies the address family.

Values

ipv4, ipv6

Platforms

All

egress-nh

egress-nh

Syntax

egress-nh [family] [summary | detail] ip-address

Context

[Tree] (show>router>ldp>bindings>active egress-nh)

Full Context

show router ldp bindings active egress-nh

Description

This command displays LDP active bindings by matching the egress Next-Hop (NH).

Parameters

family

Specifies the address family.

Values

ipv4, ipv6

ip-address

Specifies the IPv4 or IPv6 address.

Values

ipv4-address:

a.b.c.d

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x: [0 to FFFF]H

d: [0 to 255]D

Platforms

All

egress-pbr

egress-pbr

Syntax

egress-pbr [detail]

Context

[Tree] (tools>dump>filter>resources egress-pbr)

Full Context

tools dump filter resources egress-pbr

Description

This command displays the number of allocated unique egress PBR destinations.

Parameters

detail

Displays number of allocated unique egress PBR destinations together with a list of destinations and their ref counts.

Platforms

All

Output

The following output is an example of filter resource egress PBR destination information.

Output Example
*A:Dut-C>tools dump filter resources egress-pbr

===============================
Egress PBR destinations
===============================
Name                     Count
-------------------------------
All destinations             8
Unique destinations          4
===============================


*A:Dut-C# tools dump filter resources egress-pbr detail

===============================================================================
Unique egress PBR destinations
===============================================================================
Num Action       Ref. count Parameters
-------------------------------------------------------------------------------
  1 Esi L3       1          esi  00:00:00:00:00:00:00:00:00:01
                            ip   5.5.1.5
                            if   VasToFromAccess
                            rtr  123
-------------------------------------------------------------------------------
  2 Esi L3       2          esi  00:00:00:00:00:00:00:00:00:02
                            ip   5.5.0.5
                            if   VasToFromNetwork
                            rtr  123
-------------------------------------------------------------------------------
  3 Red-pol      3          name egress-pbr
-------------------------------------------------------------------------------
  4 Red-pol      2          name ingress-pbr
===============================================================================

egress-rate-distribution

egress-rate-distribution

Syntax

egress-rate-distribution

Context

[Tree] (show>lag egress-rate-distribution)

Full Context

show lag egress-rate-distribution

Description

This command displays adaptive load-balancing egress rate distribution information.

Platforms

All

egress-statistics

egress-statistics

Syntax

egress-statistics color color [end-point {ipv4-address | ipv6-address}]

Context

[Tree] (show>router>segment-routing>sr-policies egress-statistics)

Full Context

show router segment-routing sr-policies egress-statistics

Description

This command displays the egress traffic statistics of the SR policy specified by its color and end-point.

Parameters

color

Displays the color that is configured for this SR policy.

Values

0 to 4294967295

ipv4-address | ipv6-address

Displays the IPv4 or IPv6 address expressed in dotted decimal notation.

Values

ipv4-address:

  • a.b.c.d

ipv6-address:

  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d

  • x: [0 to FFFF]H

  • d: [0 to 255]D

Platforms

All

Output

The following output is an example of egress traffic statistics of the SR policy, and Show Egress Statistics Field Descriptions describes the output fields.

Output Example Show Router Segment Route Policy Egress Statistics
# show router segment-routing sr-policies egress-statistics color 20102011 end-point 10.8.100.12 
===============================================================================
SR-Policies Egress Statistics
===============================================================================
 
Egress Statistics:
 
Color           : 20102011              Endpoint Addr   : 10.8.100.12
Segment-List    : 1                     
TunnelId        : 917548                BSID            : 180001
Pkt Count       : 0                     Octet Count     : 0
 
 
Egress Statistics:
 
Color           : 20102011              Endpoint Addr   : 10.8.100.12
Segment-List    : 2                     
TunnelId        : 917548                BSID            : 180001
Pkt Count       : 0                     Octet Count     : 0
 
===============================================================================
#
show router segment-routing sr-policies egress-statistics color 10 end-point 3ffe::a14:102 
===============================================================================
SR-Policies Egress Statistics
===============================================================================
 
Egress Statistics:
 
Color           : 10                    Endpoint Addr   : 3ffe::a14:102
Segment-List    : 1                     
TunnelId        : 917520                BSID            : 100008
Pkt Count       : 3015                  Octet Count     : 313560
 
===============================================================================
Table 3. Show Egress Statistics Field Descriptions

Label

Description

Color

Indicates the color of the SR policy.

Endpoint Addr

Indicates the endpoint address of the SR policy.

Segment-List

Indicates the index of the segment list.

TunnelId

Indicates the tunnel identifier of the SR policy.

BSID

Indicates the binding SID value.

Pkt Count

Indicates the count of packets for the corresponding segment list.

Octet Count

Indicates the count of octets for the corresponding segment list.

egress-statistics

Syntax

egress-statistics color color [end-point {ipv4-address | ipv6-address}]

Context

[Tree] (clear>router>segment-routing>sr-policies egress-statistics)

Full Context

clear router segment-routing sr-policies egress-statistics

Description

This command clears the egress traffic statistics of the SR policy specified by its color and end-point.

Parameters

color

Displays the color that is configured for this SR policy.

Values

0 to 4294967295

ipv4-address | ipv6-address

Displays the IPv4 or IPv6 address expressed in dotted decimal notation.

Values

ipv4-address:

  • a.b.c.d

ipv6-address:

  • x:x:x:x:x:x:x:x (eight 16-bit pieces)

  • x:x:x:x:x:x:d.d.d.d

  • x: [0 to FFFF]H

  • d: [0 to 255]D

Platforms

All

egress-statistics

Syntax

egress-statistics color [0..4294967295] endpoint ip-address | ipv6-address [interval seconds] [repeat repeat]

Context

[Tree] (monitor>router>seg-rt>sr-policies egress-statistics)

Full Context

monitor router segment-routing sr-policies egress-statistics

Description

This command monitors SR Policy Egress Statistics.

Parameters

ip-address

Specifies the IPv4 address of the endpoint.

Values

64 characters maximum

ipv6-address

Specifies the IPv6 address of the endpoint.

Values

64 characters maximum

seconds

Configures the interval for each display in seconds.

Values

3 to 60

repeat

Configures how many times the command is repeated.

Values

1 to 999

Platforms

All

elmi

elmi

Syntax

elmi

Context

[Tree] (show elmi)

Full Context

show elmi

Description

This command displays Ethernet Link Management Interface (E-LMI) information.

Output Fields: show elmi describes the output fields for the show elmi command.

Table 4. Output Fields: show elmi

Field

Description

Link Status

Status of the E-LMI protocol when the elmi mode is set to uni-n. Link Status will indicate up if E-LMI mode is set to "none".

T391

Pooling timer used by UNI-C. UNI-N will send the consecutive single EVC asynchronous status messages every (T391/10) rounded to the second interval.

T392

Pooling verification timer for UNI-N

N393

Status counter for UNI-N.

Rx Enq. Time

Last time a status inquiry message was received from UNI-C.

Rx Enq. Msg

Number of status inquiry messages received.

Rx Check Time

Last time a status inquiry E-LMI check message was received.

Rx Inv. SeqNum

Counts the number of E-LMI messages received with invalid sequence number.

Enq Timeouts

Counts the number of T392 timer expired.

Tx Status Time

Last time a status message was sent by UNI-N.

Tx Status Msg

Number of status messages sent by UNI-N.

Tx Check Time

Last time a status E-LMI check message was sent by UNI-N.

Tx Async Status Msg

Counter for single EVC asynchronous status messages sent by UNI-N.

Discard Msg

Counter for the status inquiry messages discarded due to errors.

Platforms

All

encryption-keygroup

encryption-keygroup

Syntax

encryption-keygroup keygroup-id [spi spi]

Context

[Tree] (show>grp-encryp encryption-keygroup)

Full Context

show group-encryption encryption-keygroup

Description

This command displays NGE information for a key group.

Parameters

keygroup-id

Specifies the key group identifier to use for the output display.

Values

1 to 15 or keygroup-name (up to 64 characters)

spi

Specifies the SPI to use for the output display.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of encryption key group information, and Show Encryption Key Group Output Fields describes the fields.

Output Example
domain1>show>grp-encryp#  encryption-keygroup 2
===============================================================================
Encryption Keygroup Configuration Detail
===============================================================================
Keygroup Id        : 2
Keygroup Name      : KG1_secure
Description        : Most_secure_KG
Authentication Algo: sha256
Encryption Algo    : aes128
Active Outbound SA : 6
Activation Time    : 04/20/2015 20:07:31
-------------------------------------------------------------------------------
Security Associations
-------------------------------------------------------------------------------
Spi                : 2
Install Time       : 04/20/2015 20:08:17
Key CRC            : 0x806fb970
Spi                : 6
Install Time       : 04/20/2015 19:43:40
Key CRC            : 0xa4f2d262
-------------------------------------------------------------------------------
Encryption Keygroup Forwarded Statistics
-------------------------------------------------------------------------------
Encrypted Pkts          : 0             Encrypted Bytes         : 0
Decrypted Pkts          : 0             Decrypted Bytes         : 0
-------------------------------------------------------------------------------
Encryption Keygroup Outbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard           : 0             Unsupported Uplink      : 0
Enqueue Error           : 0             Other                   : 0
-------------------------------------------------------------------------------
Encryption Keygroup Inbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard           : 0             Invalid Spi             : 0
Authentication Failure *: 0             Control Word Mismatch   : 0
Padding Error           : 0             Enqueue Error           : 0
Other                   : 0
-------------------------------------------------------------------------------

---------------------------------------------
SDP Keygroup Association Table
---------------------------------------------
SDP ID         Direction
---------------------------------------------
61             Inbound   Outbound
---------------------------------------------
Inbound Keygroup SDP Association Count:  1
Outbound Keygroup SDP Association Count: 1

---------------------------------------------
VPRN Keygroup Association Table
---------------------------------------------
VPRN SVC ID    Direction
---------------------------------------------
12             Inbound   Outbound
---------------------------------------------
Inbound Keygroup VPRN Association Count:  1
Outbound Keygroup VPRN Association Count: 1
---------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
domain1>show>grp-encryp#
domain1# show group-encryption encryption-keygroup 1 spi 1
===============================================================================
Encryption Keygroup Security Association Detail
===============================================================================
Keygroup Id      : 1                    SPI Id           : 1
Install Time     : 06/16/2015 11:28:49
Key CRC          : 0x36e5af55
-------------------------------------------------------------------------------
Encryption Keygroup Security Association Forwarded Statistics
-------------------------------------------------------------------------------
Encrypted Pkts          : 1662534       Encrypted Bytes         : 837917136
Decrypted Pkts          : 1662333       Decrypted Bytes         : 837815832
-------------------------------------------------------------------------------
Encryption Keygroup Security Association Outbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard           : 0             Enqueue Error           : 0
Other                   : 0
-------------------------------------------------------------------------------
Encryption Keygroup Security Association Inbound Discarded Statistics (Pkts)
-------------------------------------------------------------------------------
Total Discard           : 0             Authentication Failure  : 0
Control Word Mismatch   : 0             Padding Error           : 0
Enqueue Error           : 0             Other                   : 0
===============================================================================
Table 5. Show Encryption Key Group Output Fields

Label

Description

Encryption Keygroup Configuration Detail

Keygroup Id

The key group identifier

Keygroup Name

The key group name

Description

The key group description

Authentication Algo

The authentication algorithm used for the key group

Encryption Algo

The encryption algorithm used for the key group

Active Outbound SA

The active outbound SA for the key group

Activation Time

The date and time that the key group was activated

Security Associations

Spi

The security parameter index for the SA in the key group

Install Time

The date and time that the SA was installed in the key group

Key CRC

The CRC for the key belonging to the SA

Encryption Keygroup Forwarded Statistics

Encrypted Pkts

The number of encrypted packets forwarded by the key group

Encrypted Bytes

The number of encrypted bytes forwarded by the key group

Decrypted Pkts

The number of decrypted packets forwarded by the key group

Decrypted Bytes

The number of decrypted bytes forwarded by the key group

Encryption Keygroup Outbound Discarded Statistics (Pkts)

Total Discard

The total number of outbound packets discarded by the key group

Unsupported Uplink

The total number of outbound packets discarded by the key group due to an unsupported uplink

Enqueue Error

The total number of outbound packets discarded by the key group due to an enqueuing error

Other

The total number of outbound packets discarded by the key group due to some other reason, such as an internal configuration error (for example, a key group that points to an SA, but the SA is not valid)

Encryption Keygroup Inbound Discarded Statistics (Pkts)

Total Discard

The total number of inbound packets discarded by the key group

Invalid Spi

The total number of inbound packets discarded by the key group due to an invalid SPI

Authentication Failure *

The total number of inbound packets discarded by the key group due to an authorization failure

Control Word Mismatch

The total number of inbound packets discarded by the key group due to a control word (CW) mismatch between the encrypted (protected) CW in the ESP payload and the CW that is not encrypted

Padding Error

The total number of inbound packets discarded by the key group due to a padding error

Enqueue Error

The total number of inbound packets discarded by the key group due to an enqueuing error

Other

The total number of inbound packets discarded by the key group due to some other reason (for example, an incoming packet length is incorrect)

SDP Keygroup Association Table

SDP ID

The SDP ID

Direction

The direction in which key group authentication and encryption occurs for traffic on the SDP

Inbound Keygroup SDP Association Count

The number of SDPs configured to use inbound SA

Outbound Keygroup SDP Association Count

The number of SDPs configured to use outbound SA

VPRN Keygroup Association Table

VPRN SVC ID

The VPRN service identifier

Direction

The direction in which key group authentication and encryption occurs for traffic on the VPRN

Inbound Keygroup VPRN Association Count

The number of VPRNs configured to use inbound SA

Outbound Keygroup VPRN Association Count

The number of VPRNs configured to use outbound SA

encryption-keygroup

Syntax

encryption-keygroup keygroup-id

encryption-keygroup keygroup-id spi spi

Context

[Tree] (clear>grp-encryp encryption-keygroup)

Full Context

clear group-encryption encryption-keygroup

Description

This command clears NGE information for a key group.

Parameters

keygroup-id

Specifies the key group identifier.

Values

1 to 127, keygroup-name (up to 64 characters)

spi

Specifies the SPI ID.

Values

1 to 127

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

end-sid

end-sid

Syntax

end-sid [mt {0 | 2}] [ prefix ipv6-prefix[/prefix-length]] [adv-router system-id | hostname] [ algo algo-id]

Context

[Tree] (show>router>isis>srv6 end-sid)

Full Context

show router isis segment-routing-v6 end-sid

Description

This command displays IS-IS SRv6 End SIDs.

Parameters

ipv6-prefix[/prefix-length]

Displays routes only matching the specified ip-address and length.

Values

ipv6-prefix[/prefix]: x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x: [0 to FFFF]H

d: [0 to 255]D

prefix-length: 1 to 128

system-id | hostname

Displays information for the specific IS-IS advertising router. The host name can be up to 38 characters.

algo-id

Displays information for the specified algorithm.

Values

0 to 255

Platforms

7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR

endpoint

endpoint

Syntax

endpoint [endpoint-name]

Context

[Tree] (show>service>id endpoint)

Full Context

show service id endpoint

Description

This command displays service endpoint information.

Parameters

endpoint-name

Specifies the name of an existing endpoint for the service.

Platforms

All

Output

The following output is an example of service endpoint information.

Output Example
*A:ALA-48>config>service>epipe# show service id 6 endpoint
===============================================================================
Service 6 endpoints
===============================================================================
Endpoint name      : x
Revert time        : 0
Act Hold Delay     : 0
Tx Active          : none
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
No members found.
===============================================================================
Endpoint name      : y
Revert time        : 0
Act Hold Delay     : 0
Tx Active          : none
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
No members found.
===============================================================================
*A:ALA-48>config>service>epipe#

endpoint

Syntax

endpoint [{ip-address | ipv6-address}] [ detail]

endpoint [{ip-address | ipv6-address}] egress-stats

Context

[Tree] (show>router>mpls>forwarding-policies endpoint)

Full Context

show router mpls forwarding-policies endpoint

Description

This command displays the MPLS forwarding policy endpoint information.

Parameters

ip-address

Specifies the IPv4 address of the endpoint up to 64 characters.

ipv6-address

Specifies the IPv6 address of the endpoint up to 64 characters.

detail

Specifies detailed information for the endpoint.

egress-stats

Displays the egress statistics, if any, of all the instances of the specified forwarding policy.

Platforms

All

Output

MPLS Endpoint Output Fields describes MPLS endpoint output fields.

Table 6. MPLS Endpoint Output Fields

Label

Description

Endpoint

Specifies the endpoint IP address.

Preference

Specifies the preference.

Policy Name

Specifies the MPLS forwarding policies binding label name.

Active

Specifies the active state (Y | N).

InactiveReason

Specifies the inactive reason.

Last Updated

Specifies the date and time of the last update.

Num Grps

Specifies the number of groups.

OperState

Specifies the operational state (up | down).

Metric

Specifies the metric value.

TTM Preference

Specifies the TTM preference value.

Revert Timer

Specifies the revert timer value.

Path Pref

Specifies the path preference.

Retry Count

Specifies the retry count.

Next Retry In

Specifies the next retry value.

Next-hop Group

Specifies the next-hop group.

Resolution Type

Specifies the resolution type (direct | indirect).

Oper State

Specifies the operational state (down | up).

Oper Down Reas*

Specifies the reason for being operationally down.

Num Revert

Specifies the number of reverts.

Num Failover

Specifies the number of failovers.

Next Revert In

Specifies the next revert interval.

Weight

Specifies the weight value.

Primary

Specifies the IP address of the primary next-hop.

Resolved

Specifies the resolved status (false | true).

Down Reason

Specifies the down reason.

Backup

Specifies the IP address of the backup next-hop.

StatsOperState

Specifies if a statistic index is allocated to the next-hop.

EgrStatsState

Specifies if all next-hops have a statistic index allocated.

Output Example
A:Dut-C# show router mpls forwarding-policies endpoint detail 
===============================================================================
Endpoint (Detail)
===============================================================================
Endpoint       : 10.20.1.2              Preference     : 255
Policy Name    : one
Active         : N                      InactiveReason : Not Applicable
Last Updated   : 09/27/2018 22:51:26    Num Grps       : 2
Metric         : 0                      TTM Preference : 255
Revert Timer   : 0                      Path Pref      : 255
Retry Count    : 0                      Next Retry In  : 0
Nexthop Group  : 1                      Resolution Type: direct
Oper State     : Down                   OperDownReason : Not Applicable
Num Revert     : 0                      Num Failover   : 0
Next Revert In : 0                      Weight         : 0
Primary        : 10.10.3.2
Resolved       : False                  Down Reason    : Not Applicable
Backup         : 10.10.12.2
Resolved       : False                  Down Reason    : Not Applicable
Nexthop Group  : 2                      Resolution Type: direct
Oper State     : Down                   OperDownReason : Not Applicable
Num Revert     : 0                      Num Failover   : 0
Next Revert In : 0                      Weight         : 45
Primary        : 10.10.3.3
Resolved       : False                  Down Reason    : Not Applicable
Backup         : 10.10.4.4
Resolved       : False                  Down Reason    : Not Applicable
-------------------------------------------------------------------------------
*A:Dut-B# show router mpls forwarding-policies endpoint          
===============================================================================
Endpoint Table
===============================================================================
Endpoint                      Preference               Active
-------------------------------------------------------------------------------
10.20.1.5                     2                        Y
-------------------------------------------------------------------------------
No. of Tunnels: 1
show router mpls forwarding-policies endpoint 10.20.1.5 egress-stats
===============================================================================
Endpoint (Detail)
===============================================================================
Endpoint       : 10.20.1.5             Preference        : 255 
Policy Name    : cc                    Oper State        : Up
EgrStatsState  : Up
 Next-hop Group   : 1                      
  Primary nexthop : 10.10.5.5  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000           
  Backup nexthop  : 10.10.11.4  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000           
 Next-hop Group   : 2                      
  Primary nexthop : 10.10.5.5  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000             
  Backup nexthop  : 10.10.11.4  
   StatsOperState : Up
   Aggr Pkts: 11000                    Aggr Octets: 11550000 
Total Aggr        :
   Aggr Pkts: 44000                    Aggr Octets: 46200000
-------------------------------------------------------------------------------
===============================================================================

entry

entry

Syntax

entry entry-id

Context

[Tree] (tools>perform>filter>ip-filter entry)

Full Context

tools perform filter ip-filter entry

Description

Commands in this context perform IP filter entry operations.

Parameters

entry-id

Specifies a particular entry ID.

Values

1 to 2097151

Platforms

All

entry

Syntax

entry entry-id

Context

[Tree] (tools>perform>filter>ipv6-filter entry)

Full Context

tools perform filter ipv6-filter entry

Description

Commands in this context perform IPv6 filter entry operations.

Parameters

entry-id

Specifies a particular entry ID.

Values

1 to 2097151

Platforms

All

entry

Syntax

entry entry-id

Context

[Tree] (tools>perform>filter>mac-filter entry)

Full Context

tools perform filter mac-filter entry

Description

Commands in this context perform MAC filter entry operations.

Parameters

entry-id

Specifies a particular entry ID.

Values

1 to 2097151

Platforms

All

epipe

epipe

Syntax

epipe

Context

[Tree] (show>service>id epipe)

Full Context

show service id epipe

Description

This command displays Epipe services associated with the B-VPLS service. The command only applies when the service is a B-VPLS.

Platforms

All

Output

The following output is an example of Epipe service information.

Output Example
*A:term17>show>service>id# epipe
===============================================================================
Related Epipe services for bVpls service 2000
===============================================================================
Epipe SvcId         Oper ISID           Admin               Oper
-------------------------------------------------------------------------------
100                 100                 Down                Down
-------------------------------------------------------------------------------
Number of Entries : 1
-------------------------------------------------------------------------------
*A:term17>show>service>id#

epipe-map-access-to-egress-port

epipe-map-access-to-egress-port

Syntax

epipe-map-access-to-egress-port service service-id [end-service service-id] | lag lag-id summary

Context

[Tree] (tools>dump epipe-map-access-to-egress-port)

Full Context

tools dump epipe-map-access-to-egress-port

Description

This command will display the egress port that will be used to transmit traffic associated with the displayed Epipe service(s). The information displayed shows the egress port for traffic traveling from SAP to egress SDP or SAP.

This command will support Epipe services with the following combinations:

  • SAP to SDP (with no endpoint configuration)

  • SAP to SAP (with or without an ICB)

  • SAP to SDP using endpoints with 1 or 2 SDPs

The command can be executed by specifying either a service ID, service-ID range or an ingress LAG ID.

This command will not display the egress port for traffic traveling from the SDP to egress SAP. This command also does not work with services that use policers or shared queues and also does not support PBB services.

This command replaces the command tools dump epipe-map-to-network, which has been deprecated.

Parameters

service service-id

Identifies the service ID for which the command will return the egress port. If used in conjunction with the end-service parameter, this value represent the beginning of the service ID range for which the command will be executed against.

Values

1 to 2148278316, svc-name: 64 characters max

end-service service-id

This parameter is used to identify the end of the service ID range for which the command will be executed against.

Values

1 to 2148278316, svc-name: 64 characters max

lag-id

This parameter caused the command to return the egress port for all service with SAPs associated with the specified LAG ID.

Values

1 to 800

Platforms

All

epipe-sap-template

epipe-sap-template

Syntax

epipe-sap-template

epipe-sap-template name

Context

[Tree] (show>service>template epipe-sap-template)

Full Context

show service template epipe-sap-template

Description

This command displays Epipe SAP template information.

Parameters

name

Specifies the Epipe SAP template name, up to 32 characters.

Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

error-codes

error-codes

Syntax

error-codes

Context

[Tree] (show>app-assure>http-redirect error-codes)

Full Context

show application-assurance http-redirect error-codes

Description

This command displays http-error-redirect error-codes.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of HTTP error redirect error code information, and Show Application Assurance HTTP Redirect Error Codes Output Fields describes the fields.

Output Example
*A:Dut-C>show application-assurance http-error-redirect error-codes 
===============================================================================
Application-Assurance http-error-redirect error-codes
===============================================================================
Code      Description                                 Default custom-msg-size
-------------------------------------------------------------------------------
400       Bad Request                                 1024
401       Unauthorized                                1024
402       Payment Required                            1024
403       Forbidden                                   1024
404       Not Found                                   1024
405       Method Not Allowed                          1024
406       Not Acceptable                              1024
407       Proxy Authentication Required               1024
408       Request Timeout                             1024
409       Conflict                                    1024
410       Gone                                        1024
411       Length Required                             1024
412       Precondition Failed                         1024
413       Payload Too Large                           1024
414       URI Too Long                                1024
415       Unsupported Media Type                      1024
416       Range Not Satisfiable                       1024
417       Expectation Failed                          1024
421       Misdirected Request                         1024
422       Unprocessable Entity                        1024
423       Locked                                      1024
424       Failed Dependency                           1024
425       Too Early                                   1024
426       Upgrade Required                            1024
427       Unassigned                                  1024
428       Precondition Required                       1024
429       Too Many Requests                           1024
430       Unassigned                                  1024
431       Request Header Fields Too Large             1024
451       Unavailable For Legal Reasons               1024
500       Internal Server Error                       1024
501       Not Implemented                             1024
502       Bad Gateway                                 1024
503       Service Unavailable                         1024
504       Gateway Timeout                             1024
505       HTTP Version Not Supported                  1024
506       Variant Also Negotiates                     1024
507       Insufficient Storage                        1024
508       Loop Detected                               1024
509       Unassigned                                  1024
510       Not Extended                                1024
511       Network Authentication Required             1024
730       Custom Error Code                           1024
731       Custom Error Code                           1024
735       Custom Error Code                           1024
===============================================================================
Table 7. Show Application Assurance HTTP Redirect Error Codes Output Fields

Label

Description

Description

Describes the error

Default

Indicates what the default is for the error

custom-msg-size (Custom Message Size)

The size of the message

error-codes

Syntax

error-codes

Context

[Tree] (show>app-assure>http-err-redirect error-codes)

Full Context

show application-assurance http-error-redirect error-codes

Description

This command displays HTTP error redirect error codes.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

error-counters

error-counters

Syntax

error-counters

Context

[Tree] (tools>dump>test-oam>twamp>server error-counters)

Full Context

tools dump test-oam twamp server error-counters

Description

This command dumps various error counters related to TWAMP server and TWAMP test.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of various error counters related to TWAMP server and TWAMP test.

Output Example
tools>dump>test-oam>twamp>server# error-counters
Dropped Connection Stats
------------------------
TCP connection closed                : 0
TCP connection error                 : 0
Unexpected event                     : 0
Error sending message                : 0
Error waiting for message            : 0
Connection not in a prefix           : 0
Max global limit                     : 0
Max prefix limit                     : 0
No mode specified                    : 0
Unsupported mode                     : 0
Invalid command                      : 0
Stop-sessions with bad session count : 0
Connection timeout                   : 0
Internal resource                    : 0
Invalid zero SID                     : 0
Invalid HMAC                         : 0
Dropped Connection States
-------------------------
Idle               : 0
Set-up-wait        : 0
Started            : 0
Active             : 0
Process Start      : 0
Process Stop       : 0
Process TW-session : 0
Rejected Session Stats
----------------------
Invalid address version: 0
Non-local destination : 0
Bad type-p            : 0
Padding too big       : 0
MBZ value is non-zero : 0
SID is non-zero       : 0
Timeout too large     : 0
Max global sessions   : 0
Max prefix sessions   : 0
Socket error          : 0
Source unreachable    : 0
Port in use           : 0
Duplicate session     : 0
Internal resource     : 0
REFWAIT timeout       : 0
Dropped Test Packet Stats
-------------------------
Packet wrong size         : 0
Wrong source address      : 0
Arrived before start time : 0
No Start-sessions         : 0
Invalid error estimate    : 0
Error sending reply       : 0
Invalid Server Octets     : 0
Invalid Symmetric MBZ     : 0

errors

errors

Syntax

errors

Context

[Tree] (clear>subscr-mgmt errors)

Full Context

clear subscriber-mgmt errors

Description

This command clears all errors in the circular buffer.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

errors

Syntax

errors

Context

[Tree] (show>subscr-mgmt errors)

Full Context

show subscriber-mgmt errors

Description

This command clears all errors in the circular buffer.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

es-pbr

es-pbr

Syntax

es-pbr

Context

[Tree] (show>service>id es-pbr)

Full Context

show service id es-pbr

Description

When a filter with an action forward esi is successfully added to a VPLS service and the PE receives an EVPN Auto-Discovery route for the configured ESI, this command displays the PBR VXLAN bindings auto-created, including the ESI, the VXLAN VTEP:VNI and the status of the binding.

Platforms

All

Output

Output Example
A:PE1# show service id 301 es-pbr 
===============================================================================
L2 ES PBR
===============================================================================
ESI                           Users      Status
                                         VTEP:VNI
-------------------------------------------------------------------------------
ff:00:00:00:00:00:00:00:00:01 1          Active
                                         192.0.2.72:7272
-------------------------------------------------------------------------------
Number of entries : 1
-------------------------------------------------------------------------------
===============================================================================

esa

esa

Syntax

esa esa-id [detail]

esa

esa detail

Context

[Tree] (show esa)

Full Context

show esa

Description

This command displays ESA details.

Parameters

detail

Displays detailed ESA information.

esa-id

Specifies the ESA.

Values

1 to 16

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s

Output

Show ESA Output Fields describes the ESA output fields.

The following output is an example of ESA information.

Output Example
A:node-2# show esa
====================================================================================
Extended Services Appliance Summary
====================================================================================
ESA  Description                                           Admin     Oper     Health
                                                           State     State    State
------------------------------------------------------------------------------------
1                                                          up        up       OK
2                                                          up        up       OK
====================================================================================

The following output is an example of detailed ESA information.

Output Example
A:node-2# show esa detail
===============================================================================
ESA 1
===============================================================================
Description                    : (Not Specified)
Admin State                    : up
Operational State              : up
Oper flags                     : none
IOM Host Port(s)               : 2/x1/1/c9/1
                               : 2/x1/1/c10/1
Hardware Health
    Overall Status             : OK
    Power Supply 1 Status      : OK
    Power Supply 2 Status      : OK
    Power Supply Redundancy    : Redundant
    Power Supply Mismatch Stat*: No-Mismatch
    Fan Status                 : OK
    Fan Redundancy             : Redundant
    Temperature Status         : OK
Hardware Data
    System manufacturer        : HPE
    System product name        : ESA 400G AC
    System part number         : 3HE17699BA
    System serial number       : MXQ3210CRM
    Software Version           : TiMOS-H-0.0.I7505 hypervisor/esa Copyright (c)
                                 2000-2023 Nokia. All rights reserved. All
                                 use subject to applicable license agreements.
                                 Built on Tue Sep 12 01:10:57 UTC 2023 by
                                 builder in /builds/00/I7505/panos/hypervisors
    Time of last boot          : 2023/09/12 18:07:38 UTC
    Total Cores available      : 62   
    Total Cores allocated      : 30   
    Total Cores remaining      : 32   
    Total Memory available     : 478 GB
    Total Memory allocated     : 32 GB
    Total Memory remaining     : 446 GB
    Performance enabled        : yes  
    Export restricted          : no   
    NUMA Cell Topology               
        NUMA Cell 0                  
            Cores Available    : 31   
            Cores Allocated    : 30   
            Cores Remaining    : 1    
            Memory Available   : 239 GB
            Memory Allocated   : 32 GB
            Memory Remaining   : 207 GB
            Socket             : 0    
                Host Port(i/f) : 2/x1/1/c9/1 (eth0)
                Host Port(i/f) : 2/x1/1/c10/1 (eth1)
        NUMA Cell 1                  
            Cores Available    : 31   
            Cores Allocated    : 0    
            Cores Remaining    : 31   
            Memory Available   : 239 GB
            Memory Allocated   : 0 GB 
            Memory Remaining   : 239 GB
            Socket             : 1   
===============================================================================
* indicates that the corresponding row element may have been truncated.

=============================================================================== 
ESA VMs 
=============================================================================== 
ESA   VM    VM Type   Cores   Memory  Host-Port         Admin     Oper 
                              (GB)                      State     State 
------------------------------------------------------------------------------- 
1     1     aa        15      16      2/x1/1/c9/1        up        up/active
1     2     aa        15      16      2/x1/1/c10/1       up        booting
===============================================================================

===============================================================================
ESA 2
===============================================================================
Description                    : (Not Specified)
Admin State                    : up
Operational State              : up
Oper flags                     : none
IOM Host Port(s)               : 1/1/c3/1
Hardware Health
    Overall Status             : OK
    Power Supply 1 Status      : OK
    Power Supply 2 Status      : OK
    Power Supply Redundancy    : Redundant
    Power Supply Mismatch Stat*: No-Mismatch
    Fan Status                 : OK
    Fan Redundancy             : Redundant
    Temperature Status         : OK
Hardware Data
    System manufacturer        : HPE
    System product name        : ESA 100G-2 AC
    System part number         : 3HE19113AA
    System serial number       : MXQ3210CB9
    Software Version           : TiMOS-H-0.0.I7505 hypervisor/esa Copyright (c)
                                 2000-2023 Nokia. All rights reserved. All
                                 use subject to applicable license agreements.
                                 Built on Tue Sep 12 01:10:57 UTC 2023 by
                                 builder in /builds/00/I7505/panos/hypervisors
    Time of last boot          : 2023/09/12 19:02:51 UTC
    Total Cores available      : 19
    Total Cores allocated      : 15
    Total Cores remaining      : 4
    Total Memory available     : 113 GB
    Total Memory allocated     : 64 GB
    Total Memory remaining     : 49 GB
    Performance enabled        : yes
    Export restricted          : no
    NUMA Cell Topology
        NUMA Cell 0
            Cores Available    : 19
            Cores Allocated    : 15
            Cores Remaining    : 4
            Memory Available   : 113 GB
            Memory Allocated   : 64 GB
            Memory Remaining   : 49 GB
            Socket             : 0
                Host Port(i/f) : 1/1/c3/1 (eth0)
===============================================================================
* indicates that the corresponding row element may have been truncated.

=============================================================================== 
ESA VMs 
=============================================================================== 
ESA   VM    VM Type   Cores   Memory  Host-Port         Admin     Oper 
                              (GB)                      State     State 
------------------------------------------------------------------------------- 
2     1     aa        15      64      1/1/c3/1          up        up
===============================================================================

The following outputs are examples of information about a specific ESA.

Output Example
A:node-2# show esa 1
===============================================================================
ESA 1
===============================================================================
Description                    : (Not Specified)
Admin State                    : up
Operational State              : up
Oper flags                     : none
IOM Host Port(s)               : 2/x1/1/c9/1
                               : 2/x1/1/c10/1
Hardware Health
    Overall Status             : OK
Hardware Data
    System manufacturer        : HPE
    System product name        : ESA 400G AC
    System part number         : 3HE17699BA
    System serial number       : MXQ3210CRM
    Software Version           : TiMOS-H-0.0.I7507 hypervisor/esa Copyright (c)
                                 2000-2023 Nokia. All rights reserved. All
                                 use subject to applicable license agreements.
                                 Built on Thu Sep 14 01:12:52 UTC 2023 by
                                 builder in /builds/00/I7507/panos/hypervisors
    Time of last boot          : 2023/09/14 15:25:33 UTC
    Total Cores available      : 62
    Total Cores allocated      : 30
    Total Cores remaining      : 32
    Total Memory available     : 478 GB
    Total Memory allocated     : 32 GB
    Total Memory remaining     : 446 GB
    Performance enabled        : yes  
    Export restricted          : no   
===============================================================================

===============================================================================
ESA VMs                               
===============================================================================
ESA   VM    VM Type   Cores   Memory  Host-Port         Admin     Oper
                              (GB)                      State     State
-------------------------------------------------------------------------------
1     1     aa        15      16      2/x1/1/c9/1       up        up/active
1     2     aa        15      16      2/x1/1/c10/1      up        up/active
===============================================================================
Output Example
A:node-2# show esa 2
===============================================================================
ESA 2
===============================================================================
Description                    : (Not Specified)
Admin State                    : up
Operational State              : up
Oper flags                     : none
IOM Host Port(s)               : 1/1/c3/1
Hardware Health
    Overall Status             : OK
Hardware Data
    System manufacturer        : HPE
    System product name        : ESA 100G-2 AC
    System part number         : 3HE19113AA
    System serial number       : MXQ3210CB9
    Software Version           : TiMOS-H-0.0.I7505 hypervisor/esa Copyright (c)
                                 2000-2023 Nokia. All rights reserved. All
                                 use subject to applicable license agreements.
                                 Built on Tue Sep 12 01:10:57 UTC 2023 by
                                 builder in /builds/00/I7505/panos/hypervisors
    Time of last boot          : 2023/09/12 19:02:51 UTC
    Total Cores available      : 19
    Total Cores allocated      : 15
    Total Cores remaining      : 4
    Total Memory available     : 113 GB
    Total Memory allocated     : 64 GB
    Total Memory remaining     : 49 GB
    Performance enabled        : yes
    Export restricted          : no
===============================================================================

===============================================================================
ESA VMs                               
===============================================================================
ESA   VM    VM Type   Cores   Memory  Host-Port         Admin     Oper
                              (GB)                      State     State
-------------------------------------------------------------------------------
2     1     aa        15      64      1/1/c3/1          up        up
===============================================================================

The following outputs are examples of detailed information about a specific ESA.

Output Example
A:node-2# show esa 1 detail
===============================================================================
ESA 1
===============================================================================
Description                    : (Not Specified)
Admin State                    : up
Operational State              : up
Oper flags                     : none
IOM Host Port(s)               : 2/x1/1/c9/1
                               : 2/x1/1/c10/1
Hardware Health
    Overall Status             : OK
    Power Supply 1 Status      : OK
    Power Supply 2 Status      : OK
    Power Supply Redundancy    : Redundant
    Power Supply Mismatch Stat*: No-Mismatch
    Fan Status                 : OK
    Fan Redundancy             : Redundant
    Temperature Status         : OK
Hardware Data
    System manufacturer        : HPE
    System product name        : ESA 400G AC
    System part number         : 3HE17699BA
    System serial number       : MXQ3210CRM
    Software Version           : TiMOS-H-0.0.I7505 hypervisor/esa Copyright (c)
                                 2000-2023 Nokia. All rights reserved. All
                                 use subject to applicable license agreements.
                                 Built on Tue Sep 12 01:10:57 UTC 2023 by
                                 builder in /builds/00/I7505/panos/hypervisors
    Time of last boot          : 2023/09/12 18:07:38 UTC
    Total Cores available      : 62   
    Total Cores allocated      : 30   
    Total Cores remaining      : 32   
    Total Memory available     : 478 GB
    Total Memory allocated     : 32 GB
    Total Memory remaining     : 446 GB
    Performance enabled        : yes  
    Export restricted          : no   
    NUMA Cell Topology               
        NUMA Cell 0                  
            Cores Available    : 31   
            Cores Allocated    : 30   
            Cores Remaining    : 1    
            Memory Available   : 239 GB
            Memory Allocated   : 32 GB
            Memory Remaining   : 207 GB
            Socket             : 0    
                Host Port(i/f) : 2/x1/1/c9/1 (eth0)
                Host Port(i/f) : 2/x1/1/c10/1 (eth1)
        NUMA Cell 1                  
            Cores Available    : 31   
            Cores Allocated    : 0    
            Cores Remaining    : 31   
            Memory Available   : 239 GB
            Memory Allocated   : 0 GB 
            Memory Remaining   : 239 GB
            Socket             : 1   
===============================================================================
* indicates that the corresponding row element may have been truncated.

=============================================================================== 
ESA VMs 
=============================================================================== 
ESA   VM    VM Type   Cores   Memory  Host-Port         Admin     Oper 
                              (GB)                      State     State 
------------------------------------------------------------------------------- 
1     1     aa        15      16      2/x1/1/c9/1        up        up/active
1     2     aa        15      16      2/x1/1/c10/1       up        booting
===============================================================================
Output Example
A:node-2# show esa 2 detail
===============================================================================
ESA 2
===============================================================================
Description                    : (Not Specified)
Admin State                    : up
Operational State              : up
Oper flags                     : none
IOM Host Port(s)               : 1/1/c3/1
Hardware Health
    Overall Status             : OK
    Power Supply 1 Status      : OK
    Power Supply 2 Status      : OK
    Power Supply Redundancy    : Redundant
    Power Supply Mismatch Stat*: No-Mismatch
    Fan Status                 : OK
    Fan Redundancy             : Redundant
    Temperature Status         : OK
Hardware Data
    System manufacturer        : HPE
    System product name        : ESA 100G-2 AC
    System part number         : 3HE19113AA
    System serial number       : MXQ3210CB9
    Software Version           : TiMOS-H-0.0.I7505 hypervisor/esa Copyright (c)
                                 2000-2023 Nokia. All rights reserved. All
                                 use subject to applicable license agreements.
                                 Built on Tue Sep 12 01:10:57 UTC 2023 by
                                 builder in /builds/00/I7505/panos/hypervisors
    Time of last boot          : 2023/09/12 19:02:51 UTC
    Total Cores available      : 19
    Total Cores allocated      : 15
    Total Cores remaining      : 4
    Total Memory available     : 113 GB
    Total Memory allocated     : 64 GB
    Total Memory remaining     : 49 GB
    Performance enabled        : yes
    Export restricted          : no
    NUMA Cell Topology
        NUMA Cell 0
            Cores Available    : 19
            Cores Allocated    : 15
            Cores Remaining    : 4
            Memory Available   : 113 GB
            Memory Allocated   : 64 GB
            Memory Remaining   : 49 GB
            Socket             : 0
                Host Port(i/f) : 1/1/c3/1 (eth0)
===============================================================================
* indicates that the corresponding row element may have been truncated.

===============================================================================
ESA VMs
===============================================================================
ESA   VM    VM Type   Cores   Memory  Host-Port         Admin     Oper
                              (GB)                      State     State
-------------------------------------------------------------------------------
2     1     aa        15      64      1/1/c3/1          up        up
===============================================================================
Table 8. Show ESA Output Fields

Label

Description

ESA

The ESA identification number

Description

Description for the ESA

Admin State

up — Administratively up

down — Administratively down

Operational State

up — Operationally up

down — Operationally down

booting

failed

provisioned

unprovisioned

fwUpgrade — Firmware upgrade

Oper flags

Operational flag of the ESA

IOM Host Port(s)

The IOM host port or ports in slot/mda/port format

Hardware Health

Health statuses for hardware components

Hardware Data

Detailed hardware data about the ESA

NUMA Cell Topology

Number of cores, amount of memory, and Ethernet ports available to the NUMA cell

VM

The VM identification number

VM Type

The VM type (aa, bb, or tunnel)

Cores

The number of cores of the ESA-VM

Memory (GB)

The memory on the ESA-VM

esa

Syntax

esa esa-id

Context

[Tree] (clear esa)

Full Context

clear esa

Description

This command clears the statistics or status pertaining to the specified ESA.

Parameters

esa-id

Specifies the ESA.

Values

1 to 16

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s

esa-vm

esa-vm

Syntax

esa [esa-id/vm-id] [ detail]

Context

[Tree] (show esa-vm)

Full Context

show esa-vm

Description

This command displays ESA-VM details.

Parameters

esa-id

Specifies the ESA.

Values

1 to 16

vm-id

Specifies the VM.

Values

1 to 4

detail

Specifies the detailed ESA-VM information.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s

Output

The following are output examples for this command.

Output Example
*A:Dut-A# show esa-vm 1/1 detail
===============================================================================
ESA     VM      VM Type     Cores     Memory    Admin           Oper
                                      (GB)      State           State
-------------------------------------------------------------------------------
1       1       aa          23        64        up              up/active
===============================================================================
===============================================================================
ESA/VM 1/1
===============================================================================
Description        : (Not Specified)
IOM Host Port      : 1/1/c1/1
Software Version   : TiMOS-M-0.0.I6237 esav-aa/esavm Nokia 7xxx ESAV Copyright
                     (c) 2000-2020 Nokia.
                     All rights reserved. All use subject to applicable
                     license agreements.
                     Built on Sun Apr 5 18:08:04 PDT 2020 by builder in /
                     builds/c/00/I6237/panos/main/sros
Time of last boot  : 2020/04/06 20:36:12 UTC
Oper flags         : none
===============================================================================
===============================================================================
VM Utilization
===============================================================================
Virtual                           Virtual                 15min      All-time
Core Role                         Core Id     Current %  Average %     Peak %
-------------------------------------------------------------------------------
Mgmt-0                              1          8.65        5.91        8.83
Mgmt-1                              2          6.83        5.83        8.84
Mgmt-2                              3          8.22        5.69        8.22
Mgmt-3                              4          8.58        5.96        9.52
Worker-0                            5         27.18       15.56       27.18
Worker-1                            6         27.70       15.81       27.70
Worker-2                            7         27.79       15.88       27.79
Worker-3                            8         27.83       15.88       27.83
Worker-4                            9         28.05       16.01       28.05
Worker-5                            10        28.04       15.98       28.04
Worker-6                            11        28.05       16.04       28.05
Worker-7                            12        28.09       16.02       28.09
Worker-8                            13        28.00       15.99       28.00
Worker-9                            14        28.05       15.99       28.05
Worker-10                           15        27.82       15.89       27.82
Worker-11                           16        27.83       15.87       27.83
Worker-12                           17        27.84       15.88       27.84
Worker-13                           18        27.79       15.83       27.79
Worker-14                           19        27.83       15.91       27.83
Worker-15                           20        27.85       15.90       27.85
Worker-16                           21        27.99       15.98       27.99
Worker-17                           22        28.09       16.03       28.09
Worker-18                           23        28.00       16.00       28.00
Worker-19                           24        27.97       15.95       27.97
Worker-20                           25        27.88       15.92       27.88
Worker-21                           26        27.91       15.93       27.91
Worker-22                           27        27.80       15.89       27.80
Worker-23                           28        27.77       15.84       27.77
Worker-24                           29        27.78       15.86       27.78
Worker-25                           30        27.82       15.86       27.82
Worker-26                           31        27.93       15.93       27.93
Worker-27                           32        27.90       15.91       27.90
Worker-28                           33        27.97       15.98       27.97
Worker-29                           34        28.44       16.19       28.44
Worker-30                           35        28.22       16.13       28.22
Worker-31                           36        28.28       16.13       28.28
Worker-32                           37        28.08       16.05       28.08
Worker-33                           38        28.15       16.06       28.15
Worker-34                           39        27.90       15.92       27.90
Worker-35                           40        27.50       15.68       27.50
Worker-36                           41        27.48       15.70       27.48
Worker-37                           42        27.57       15.72       27.57
Idle-0                              43         0.00        0.00        0.00
Scheduler-0                         44        41.40       24.36       41.40
Idle-1                              45         0.00        0.00        0.00
Nic-0                               46        57.60       33.47       57.60
-------------------------------------------------------------------------------
===============================================================================

Show ESA-VM Output Fields describes the ESA-VM output fields.

Output Example
*A:Dut-B# show esa-vm 6/1
===============================================================================
ESA     VM      VM Type     Cores     Memory    Admin           Oper
                                      (GB)      State           State
-------------------------------------------------------------------------------
6       1       aa          4         6         up              up
===============================================================================
===============================================================================
ESA/VM 6/1
===============================================================================
Description        : (Not Specified)
IOM Host Port      : 1/1/2
Software Version   : TiMOS-M-0.0.I6015 esav-aa/esavm Nokia 7xxx ESAV Copyright
                     (c) 2000-2019 Nokia.
                     All rights reserved. All use subject to applicable
                     license agreements.
                     Built on Mon Aug 26 18:04:52 PDT 2019 by builder in /
                     builds/c/00/I6015/panos/main
Time of last boot  : 2019/08/27 15:40:54 UTC
Oper flags         : none
===============================================================================
*A:Dut-B# show esa-vm 6/2
===============================================================================
ESA     VM      VM Type     Cores     Memory    Admin           Oper
                                      (GB)      State           State
-------------------------------------------------------------------------------
6       2       tunnel      4         6         up              up
===============================================================================
===============================================================================
ESA/VM 6/2
===============================================================================
Description        : (Not Specified)
IOM Host Port      : 1/1/2
Software Version   : TiMOS-M-0.0.I6015 esav-tunnel/esavm Nokia 7xxx ESAV
                     Copyright (c) 2000-2019 Nokia.
                     All rights reserved. All use subject to applicable
                     license agreements.
                     Built on Mon Aug 26 18:04:52 PDT 2019 by builder in /
                     builds/c/00/I6015/panos/main
Time of last boot  : 2019/08/27 15:40:51 UTC
Oper flags         : none
===============================================================================
*A:Dut-B# show esa-vm 6/3
===============================================================================
ESA     VM      VM Type     Cores     Memory    Admin           Oper
                                      (GB)      State           State
-------------------------------------------------------------------------------
6       3       bb          4         16        up              up
===============================================================================
===============================================================================
ESA/VM 6/3
===============================================================================
Description        : (Not Specified)
IOM Host Port      : 1/1/2
Software Version   : TiMOS-M-0.0.I6015 esav-bb/esavm Nokia 7xxx ESAV Copyright
                     (c) 2000-2019 Nokia.
                     All rights reserved. All use subject to applicable
                     license agreements.
                     Built on Mon Aug 26 18:04:52 PDT 2019 by builder in /
                     builds/c/00/I6015/panos/main
Time of last boot  : 2019/08/27 15:41:00 UTC
Oper flags         : none
===============================================================================
Table 9. Show ESA-VM Output Fields

Label

Description

ESA

The ESA identification number

VM

The VM identification number

VM Type

The VM type (aa, bb, or tunnel)

Cores

The number of cores of the ESA-VM

Memory (GB)

The memory on the ESA-VM

Admin State

up — Administratively up

down — Administratively down

Operational State

up — Operationally up

down — Operationally down

booting

failed

provisioned

unprovisioned

IOM Host Port

The IOM host port in slot/mda/port format

Oper flags

The operational flags for the ESA-VM

Virtual Core Role

The virtual core role (Mgmt-#, Worker-#, Idle-#, Scheduler-#, Nic-#)

Virtual Core Id

The Virtual Core identification number

Current %

The current processing load of the virtual core

15min Average %

The 15 minute average processing load of the virtual core

All-time Peak %

The all-time peak processing load of the virtual core

esa-vm

Syntax

esa-vm [esa-id/vm-id]

Context

[Tree] (clear esa-vm)

Full Context

clear esa-vm

Description

This command clears the statistics or status pertaining to the specified ESA-VM.

Parameters

esa-id

Specifies the ESA.

Values

1 to 16

vm-id

Specifies the VM.

Values

1 to 4

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s

est-profile

est-profile

Syntax

est-profile [name]

Context

[Tree] (show certificate est-profile)

Full Context

show certificate est-profile

Description

This command displays EST profile information. If a profile name is not specified, the command displays information about all the EST profiles.

Parameters

name

Specifies an existing EST profile name, up to 32 characters.

Platforms

All

Output

The following output is an example of the show certificate est-profile command

Output Example
*A:cses-V27# show certificate est-profile
===============================================================================
EST Profile         Server
                    Address:Port
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No. of EST Profiles: 0
===============================================================================

eth

eth

Syntax

eth

Context

[Tree] (tools>perform>service>id>loopback eth)

Full Context

tools perform service id loopback eth

Description

Commands in this context configure a loopback on Ethernet SAPs or MPLS SDP bindings.

Platforms

All

eth-cfm

eth-cfm

Syntax

eth-cfm

Context

[Tree] (show eth-cfm)

Full Context

show eth-cfm

Description

Commands in this context display eth-cfm information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

eth-cfm

Syntax

eth-cfm

Context

[Tree] (clear eth-cfm)

Full Context

clear eth-cfm

Description

Commands in this context display CFM information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

eth-cfm

Syntax

eth-cfm

Context

[Tree] (tools>dump eth-cfm)

Full Context

tools dump eth-cfm

Description

Commands in this context configure debugging for Ethernet Connectivity Fault Management.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

eth-cfm

Syntax

eth-cfm

Context

[Tree] (monitor eth-cfm)

Full Context

monitor eth-cfm

Description

Commands in this context monitor statistics for Ethernet connectivity fault management.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

eth-cfm

Syntax

eth-cfm

Context

[Tree] (show>service>sdp-using eth-cfm)

Full Context

show service sdp-using eth-cfm

Description

Commands in this context display SDP binding information for a specific ETH-CFM.

Platforms

All

eth-cfm

Syntax

eth-cfm [tunnel tunnel-id] [detail]

Context

[Tree] (show>lag eth-cfm)

Full Context

show lag eth-cfm

Description

This command displays ETH-CFM information.

Parameters

tunnel-id

Filters ETH-CFM MEP information to one tunnel.

Values

1 to 4094

detail

Displays detailed information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

eth-cfm

Syntax

eth-cfm [detail]

Context

[Tree] (show>port>ethernet eth-cfm)

Full Context

show port ethernet eth-cfm

Description

This command displays ETH-CFM information.

Parameters

detail

Displays detailed information.

Platforms

All

eth-cfm-monitoring

eth-cfm-monitoring

Syntax

eth-cfm-monitoring [{service-id service-id sap-id sap-id} | {service-id service-id sdp-id sdp-id:vc-id}]

Context

[Tree] (show>system>security>cpu-protection eth-cfm-monitoring)

Full Context

show system security cpu-protection eth-cfm-monitoring

Description

This command displays sources exceeding their eth-cfm-monitoring rate limit.

Parameters

service-id

Specifies the service ID.

Values

1 to 2148278317, svc-name up to 64 characters in length

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS

eth-cfm-monitoring

Syntax

eth-cfm-monitoring

Context

[Tree] (clear>cpu-protection eth-cfm-monitoring)

Full Context

clear cpu-protection eth-cfm-monitoring

Description

This command clears records of flows exceeding the ETH-CFM monitoring rate limit.

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS

eth-ring

eth-ring

Syntax

eth-ring

Context

[Tree] (tools>perform eth-ring)

Full Context

tools perform eth-ring

Description

This command performs Ethernet ring operations.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

eth-ring

Syntax

eth-ring [status]

eth-ring [ring-index] hierarchy

eth-ring ring-index [path {a | b}]

Context

[Tree] (show eth-ring)

Full Context

show eth-ring

Description

This command displays Ethernet Ring information.

Parameters

status

Specifies to display an Ethernet Ring status summary

ring-index

Specifies an Ethernet Ring index

Values

1 to 128

hierarchy

Specifies to display Ethernet Ring hierarchical relationships

path

Specifies to show information for a specific path

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

eth-ring

Syntax

eth-ring ring-index [ clear]

Context

[Tree] (tools>dump eth-ring)

Full Context

tools dump eth-ring

Description

This command displays Ethernet Ring information.

Parameters

ring-index

Specifies an Ethernet Ring index.

Values

1 to 128

clear

Keyword to clear stored information for the specified Ethernet Ring.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

eth-sat

eth-sat

Syntax

eth-sat [sat-id]

Context

[Tree] (show>system>satellite eth-sat)

Full Context

show system satellite eth-sat

Description

This command displays information about configured Ethernet satellites. If a sat-id is specified, this command displays information only about the specified Ethernet satellite.

Parameters

sat-id

Specifies the Ethernet satellite chassis.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of Ethernet satellite information.

Output Example
A:Dut-A# show system satellite eth-sat 1 
===============================================================================
Satellite Information
===============================================================================
SatID     Provisioned Type                         Admin         Oper
              Equipped Type (if different)         State         State
-------------------------------------------------------------------------------
esat-1    es48-1gb-sfp                             up            up
Description         : (Not Specified)
MAC Address         : e4:81:84:24:2e:e5
Software Repository : rep1
SyncE               : Disabled
Client-Down-Delay   : Disabled | 5-1800sec
Hardware Data
    Platform type                 : N/A
    Part number                   : 82-0825-01
    CLEI code                     : 
    Serial number                 : 01154100020
    Manufacture date              : 
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number : 
    Administrative state          : up
    Operational state             : up
    Temperature                   : 51C
    Temperature threshold         : 85C
    Software boot (rom) version   : X-9.0.S222 on Thu Feb 16 03:29:00 IST 20xx
                                    by builder
    Software version              : TiMOS-B-8.0.R9 both/hops Nokia SAS-Sx
                                    46F2C4SFP+ 7210 Copyright (c) 2000-2020
                                    Nokia.
                                    All rights reserved. All use subject to
                                    applicable license agreements.
                                    Built on Mon Oct 31 10:10:30 IST 2020 by
                                    builder in /home/builder/8.0B1/R9/panos/
                                    main
    Time of last boot             : 2020/02/28 13:02:41
    Current alarm state           : alarm cleared
    Base MAC address              : e4:81:84:24:2e:e5
===============================================================================


*A:Dut-A>config>system>sat>eth-sat# /show system satellite eth-sat 1 
===============================================================================
Satellite Information
===============================================================================
SatID     Provisioned Type                         Admin         Oper
              Equipped Type (if different)         State         State
-------------------------------------------------------------------------------
esat-1    es48-1gb-sfp                             up            up
Description         : (Not Specified)
MAC Address         : 8c:f7:73:cc:ca:61
Software Repository : rep1
SyncE               : Disabled
PTP-TC              : Disabled
Client-Down-Delay   : Disabled
Console Access      : Enabled
Port-Template       : (Not Specified)

eth-sat

Syntax

eth-sat sat-id

Context

[Tree] (clear>system>satellite eth-sat)

Full Context

clear system satellite eth-sat

Description

Commands in this context clear Ethernet satellite information.

Parameters

sat-id

Specifies the Ethernet satellite ID.

Values

1 to 20

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

eth-seg

eth-seg

Syntax

eth-seg [hunt | detail] [rd rd] [community comm-id] [originator-ip ip-address | ipv6-address] [next-hop next-hop] [esi esi] [aspath-regex reg-exp]

Context

[Tree] (show>router>bgp>routes>evpn eth-seg)

Full Context

show router bgp routes evpn eth-seg

Description

This command displays BGP-EVPN Ethernet Segment (ES) routes.

Parameters

hunt

Displays entries for the specified route.

detail

Displays detailed information.

rd

Displays information for the route distinguisher.

Values

ip-addr:comm-val | 2byte-asnumber:ext-comm-val | 4byte-asnumber:comm-val

comm-id

Specifies community ID, up to 72 characters.

Values

[as-num:comm-val | ext-comm | well-known-comm]

where:

  • as-num — 0 to 65535

  • comm-val — 0 to 65535

  • ext-comm — the extended community, defined as the following: type:{ ip-address:comm-val1 | as-number1:comm-val2 | as-number2:comm-val1}

    where:

    • as-number1 — 0 to 65535

    • comm-val1 — 0 to 65535

    • type — target, origin

    • ip-address — a.b.c.d

    • comm-val2 — 0 to 4294967295

    • as-number2 — 0 to 4294967295

  • well-known-commnull | no-export | no-export-subconfed | no-advertise |

ip-address | ipv6-address

Specifies the IPv4 or IPv6 originator address, up to 64 characters.

next-hop

Specifies the IPv4 or IPv6 BGP next-hop address.

Values

ipv4-address:

a.b.c.d

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x: [0 to FFFF]H

d: [0 to 255]D

esi

Specifies a 10-byte ESI by which to filter the displayed information. For example,ESI-0 | ESI-MAX or 00-11-22-33-44-55-66-77-88-99 with any of these separators('-',':',' ')

reg-exp

Displays routes matching the specified regular expression, up to 80 characters.

Platforms

All

eth-tunnel

eth-tunnel

Syntax

eth-tunnel [group tunnel-group-name] [ vc-id vc-id]]

Context

[Tree] (show>router>l2tp eth-tunnel)

Full Context

show router l2tp eth-tunnel

Description

This command displays information about configured L2TPv3 Ethernet tunnels. These Ethernet tunnels are the L2TPv3 sessions setup between the local private L2 SAP and the far end device.

If this command is executed without any parameters, then a list of all configured Ethernet tunnels are displayed.

If this command is executed with a tunnel group name or a VC-ID, then a detailed view of the associated Ethernet tunnel is displayed.

Parameters

tunnel-group-name

Specifies the configured tunnel group name used for the associated Ethernet tunnel.

vc-id

Specifies the VC ID for the L2TPv3 Ethernet tunnel.

Values

0 to 4294967295

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of L2TPv3 Ethernet tunnel information

Output Example
A:Dut-A# show router 200 l2tp eth-tunnel   
===============================================================================
L2TPv3 Ethernet Tunnel Summary
===============================================================================
Tunnel Group name                                               VC ID
-------------------------------------------------------------------------------
v3-group-1                                                      100
-------------------------------------------------------------------------------
No. of ethernet tunnels: 1
===============================================================================

A:Dut-A# show router 200 l2tp eth-tunnel group "v3-group-1" 
===============================================================================
L2TPv3 Ethernet Tunnel Status
===============================================================================
Group Name         : v3-group-1
VC ID              : 100
Local Conn ID      : 221122308
Ctrl Conn ID       : 221118464
Matches Cfg        : true
Down Reason        : N/A
Reconnect Time (s) : N/A
Remaining Time (s) : N/A
SAP ID             : tunnel-1.private:100
SAP Service ID     : 100
-------------------------------------------------------------------------------
No. of ethernet tunnels: 1
===============================================================================

eth-tunnel

Syntax

eth-tunnel

eth-tunnel {aps | status}

eth-tunnel tunnel-index [path path-index] [detail]

Context

[Tree] (show eth-tunnel)

Full Context

show eth-tunnel

Description

This command displays Ethernet tunnel information. Any data SAP missing a tag for a defined path has the EthTunTagMismatch flag generated. In the example provided below, SAP eth-tunnel-1:1 does not have the tag for path 2 configured. Therefore, it is operationally down with the reason indicated by the EthTunTagMismatch flag.

Parameters

aps

Shows APS Ethernet tunnel information.

status

Shows Ethernet tunnel status information.

tunnel-index

Specifies the tunnel index.

Values

1 to 1024

path-index

Specifies the path index.

Values

1 to 16

detail

Displays detailed information.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of Ethernet tunnel information, and Output Fields: show eth-tunnel describes the output fields.

Output Example: show eth-tunnel
*A:PE-E# show eth-tunnel
===============================================================================
Ethernet Tunnel Groups
===============================================================================
Tunnel Admin  Oper   Protection    Active Paths
ID     State  State  Type            1  2  3  4  5  6  7  8
-------------------------------------------------------------------------------
1      Up     Up     g.8031-1to1     x  2
2      Up     Up     g.8031-1to1     1  x
===============================================================================
*A:PE-E#
*A:PE-E# show eth-tunnel aps
===============================================================================
Ethernet Tunnel APS Groups
===============================================================================
Tunnel Admin  Oper   Working Path           Path   Active Rx PDU
ID     State  State  Protecting Path        State  Path   Tx PDU
-------------------------------------------------------------------------------
1      Up     Up     1 - 1/1/2 1            Down   No     BF010100 (  SF)
                     2 - 2/1/2 1            Up     Yes    BF010100 (  SF)
2      Up     Up     1 - 2/1/2 2            Up     Yes    0F000000 (  NR)
                     2 - 1/1/2 2            Down   No     EF000000 (SF-P)
===============================================================================
*A:PE-E#

*A:PE-E# show eth-tunnel 1
===============================================================================
Ethernet Tunnel Group 1 Information
===============================================================================
Description        : Eth Tunnel
IfIndex            : 1476395009
Admin State        : Up                 Oper State       : Up
Protection Type    : G.8031-1to1        Max Revert Time  :    1 seconds
MAC Address        : 00:1a:f0:44:d2:03  Time to Revert   : N/A
                                        Hold Down Time   :    0 centiseconds
-------------------------------------------------------------------------------
Ethernet Tunnel Group APS Information
-------------------------------------------------------------------------------
APS PDU Rx         : BF010100 (  SF)    Switchover Time  : 05/28/2009 10:10:17
APS PDU Tx         : BF010100 (  SF)
Defect Status      :
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Ethernet Tunnel Group Path Summary
-------------------------------------------------------------------------------
Path ID   Member   Control-Tag Precedence      Admin/Oper      Active  Mgmt
-------------------------------------------------------------------------------
   1      1/1/2    1           primary            Up/Down      No      Yes
   2      2/1/2    1           secondary          Up/Up        Yes     No
===============================================================================
*A:PE-E# 

*A:PE-E# show eth-tunnel 1 path 1
===============================================================================
Ethernet Tunnel Group 1 Path Information
===============================================================================
Description        : (Not Specified)
Member             : 1/1/2              Control-Tag      : 1
Admin State        : Up                 Oper State       : Down
-------------------------------------------------------------------------------
Ethernet Tunnel Group Path APS Information
-------------------------------------------------------------------------------
Active Count       : 2                  Active Time      : 0d 00:12:09
-------------------------------------------------------------------------------
Eth-Cfm Configuration Information
-------------------------------------------------------------------------------
Md-index           : 1                  Direction        : Down
Ma-index           : 1                  Admin            : Enabled
MepId              : 1                  CCM-Enable       : Enabled
LowestDefectPri    : macRemErrXcon      HighestDefect    : defRemoteCCM
Defect Flags       : bDefRemoteCCM
Mac Address        : 00:16:4d:c0:c1:ca  ControlMep       : True
===============================================================================
*A:PE-E# 

*A:PE-E# show eth-tunnel 1 path 1 detail
===============================================================================
Ethernet Tunnel Group 1 Detailed Path Information
===============================================================================
Description        : (Not Specified)
Member             : 1/1/2              Control-Tag      : 1
Admin State        : Up                 Oper State       : Down
-------------------------------------------------------------------------------
Ethernet Tunnel Group Path APS Information
-------------------------------------------------------------------------------
Active Count       : 2                  Active Time      : 0d 00:12:09
-------------------------------------------------------------------------------
Eth-Cfm Configuration Information
-------------------------------------------------------------------------------
Md-index           : 1                  Direction        : Down
Ma-index           : 1                  Admin            : Enabled
MepId              : 1                  CCM-Enable       : Enabled
LowestDefectPri    : macRemErrXcon      HighestDefect    : defRemoteCCM
Defect Flags       : bDefRemoteCCM
Mac Address        : 00:16:4d:c0:c1:ca  ControlMep       : True
CcmLtmPriority     : 7
CcmTx              : 0                  CcmSequenceErr   : 0
Eth-Ais:           : Disabled
Eth-Tst:           : Disabled
LbRxReply          : 0                  LbRxBadOrder     : 0
LbRxBadMsdu        : 0                  LbTxReply        : 0
LbNextSequence     : 1                  LtNextSequence   : 1
LtRxUnexplained    : 0
===============================================================================
*A:PE-E#
Table 10. Output Fields: show eth-tunnel

Field

Description

Tunnel Id

Numeric value from 1 to 64.

Admin State

Up — The eth tunnel is administratively up.

Down — The eth tunnel is administratively down.

Oper State

Up — The eth tunnel is operationally up.

Down — The eth tunnel is operationally down.

Protection Type

Two options:

g8031-1to1 — Two members are allowed, but only one of them is active at one point in time.

loadsharing — Multiple members can be active at one point in time.

Active Paths

Only two paths are supported.

eth-tunnel

Syntax

eth-tunnel tunnel-index [clear]

Context

[Tree] (tools>dump eth-tunnel)

Full Context

tools dump eth-tunnel

Description

This command displays Ethernet tunnel information.

Parameters

tunnel-id

Specifies the tunnel ID.

Values

1 to 128

clear

Clears statistics after reading.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Output

The following output is an example of Ethernet tunnel information.

Output Example
*A:PE-E# tools dump eth-tunnel 1

TunnelId 1 (Up/Up), Port eth-tunnel-1 (Up/Up): type g8031-1to1
 NumMems 2/2, Up/Dn 0/0, active 0x1, present 0x3 baseMemPort 1/1/2
  memId 1 (P), port 1/1/2 (Up), tag 1.0(Up) status (Up/Up)
    ccCnt-sf/ok 1/1 idx 0 tunId 1
  memId 2 (S), port 2/1/2 (Up), tag 1.0(Up) status (Up/Up)
    ccCnt-sf/ok 0/0 idx 1 tunId 1

  TunId = 1, state = Running, Active =  Work, Now = 000 00:16:48.140
   revert = 1, ReqState = NR-NULL, Pdu(Tx/Rx): 0x0f0000/0x0f0000
   Defects =
   Running Timers = PduReTx
    Work MemId = 1 (1/1/2:1.0), state = Ok, cc = 000 00:16:23.510U
      ActiveCnt = 4, ActiveSeconds = 791
    Protect MemId = 2 (2/1/2:1.0), state = Ok, cc = 000 00:09:47.560U
      ActiveCnt = 3, ActiveSeconds = 308
   DbgCnts: swoEv = 2, wMemSts = 2, pMemSts =  0
      rxPdu (valid/Invalid) = 4/0, wSfClr = 1, pSfClr = 0, wtrExp =  1
      cm = 0, cmClr = 0, pm = 0, pmClr = 0, nr = 0, nrClr = 0
  Seq  Event     TxPdu           RxPdu       Dir    Act          Time
  ===  ========  ============  ============  =====  ====  ================
  000   wMemSts  0xbf0101 wSF  0x0f0000  NR  Tx-->  Prot  000 00:16:12.450
  001     RxPdu  0xbf0101 wSF  0x0f0101  NR  Rx<--  Prot  000 00:16:12.450
  002     RxPdu  0xbf0101 wSF  0xbf0101 wSF  Rx<--  Prot  000 00:16:12.480
  003     RxPdu  0xbf0101 wSF  0x0f0101  NR  Rx<--  Prot  000 00:16:24.890
  004    wSFClr  0x5f0101 WTR  0x0f0101  NR  Tx-->  Prot  000 00:16:25.030
  005       WTR  0x0f0000  NR  0x0f0101  NR  Tx-->  Work  000 00:16:26.630
  006     RxPdu  0x0f0000  NR  0x0f0000  NR  Rx<--  Work  000 00:16:26.630
*A:PE-E#

ethernet

ethernet

Syntax

ethernet

Context

[Tree] (clear>port ethernet)

Full Context

clear port ethernet

Description

Commands in this context clear Ethernet port statistics.

Platforms

All

ethernet

Syntax

ethernet

Context

[Tree] (show>system ethernet)

Full Context

show system ethernet

Description

Commands in this context display system-specific Ethernet information.

Platforms

All

ethernet

Syntax

ethernet

ethernet associations

ethernet [detail]

Context

[Tree] (show>port ethernet)

Full Context

show port ethernet

Description

Commands in this context display Ethernet port information.

Parameters

associations

Displays Ethernet port associations.

detail

Displays detailed information.

Platforms

All

ethernet-segment

ethernet-segment

Syntax

ethernet-segment

ethernet-segment name name [all]

ethernet-segment name name evi [evi]

ethernet-segment name name isid [isid]

ethernet-segment name name virtual-ranges

Context

[Tree] (show>service>system>bgp-evpn ethernet-segment)

Full Context

show service system bgp-evpn ethernet-segment

Description

Commands in this context display the Ethernet Segment (ES) parameters.

Parameters

name

Specifies the name of an ES, up to 32 characters.

all

Displays all available information for the specified ES.

evi

Displays information for the specified EVPN Instance (EVI) .

Values

1 to 65535

isid

Displays information for the specified ISID.

Values

1 to 16777215

virtual-ranges

Displays the VD-ID, Q-tag, S-tag, or C-tag per S-tag virtual ranges configured on the virtual ES.

Platforms

All

Output

See the following output examples:

Output Example: show service system BGP EVPN ES information
show service system bgp-evpn ethernet-segment name "ES-1"
 
===============================================================================
Service Ethernet Segment
===============================================================================
Name                    : ES-1
Eth Seg Type            : None               
Admin State             : Enabled            Oper State         : Up
ESI                     : auto-esi
Oper ESI                : 01:d8:47:ff:00:00:00:00:01:00
Auto-ESI Type           : Type 1             
AC DF Capability        : Exclude            
Multi-homing            : singleActive       Oper Multi-homing  : singleActive
ES SHG Label            : 524285             
Source BMAC LSB         : None 
Vprn Next Hop           : 1.1.1.1              
Lag Id                  : 1                  
ES Activation Timer     : 0 secs             
Oper Group              : es-1
Svc Carving             : manual             Oper Svc Carving   : manual
Cfg Range Type          : lowest-pref        
-------------------------------------------------------------------------------
DF Pref Election Information
-------------------------------------------------------------------------------
Preference     Preference     Last Admin Change        Oper Pref      Do No
Mode           Value                                   Value          Preempt
-------------------------------------------------------------------------------
non-revertive  32767          04/12/2021 08:08:54      32767          Enabled
-------------------------------------------------------------------------------
EVI Ranges: <none>
ISID Ranges: <none>
===============================================================================
Output Example: show service system BGP EVPN ES information for configured auto-ESI with operational ESI derived
show service system bgp-evpn ethernet-segment name "ES-1" 
============================================================
Service Ethernet Segment
============================================================
Name            : ES-1
Eth Seg Type    : None            
Admin State     : Enabled     Oper State         : Up
ESI             : auto-esi
Oper ESI        : 01:00:ca:fe:ca:fe:00:01:01:00
Auto-ESI Type   : Type 1
AC DF Capability: Exclude            
Multi-homing    : allActive   Oper Multi-homing  : allActive
Output Example: show service system BGP EVPN ES information for configured auto-ESI with operational ESI pending derivation
show service system bgp-evpn ethernet-segment name "ES-1"

============================================================
Service Ethernet Segment
============================================================
Name            : ES-1
Eth Seg Type    : None            
Admin State     : Enabled     Oper State         : Up
ESI             : auto-esi
Oper ESI        : None
Auto-ESI Type   : Type 1 
AC DF Capability: Exclude            
Multi-homing    : allActive   Oper Multi-homing  : allActive
Output Example: show service system BGP EVPN ES information for manually configured ESI
show service system bgp-evpn ethernet-segment name "ES-1"
============================================================
Service Ethernet Segment
============================================================
Name            : ES-1
Eth Seg Type    : None            
Admin State     : Enabled     Oper State         : Up
ESI             : 01:00:ca:fe:ca:fe:00:01:01:00
Oper ESI        : 01:00:ca:fe:ca:fe:00:01:01:00
Auto-ESI Type   : None
AC DF Capability: Exclude            
Multi-homing    : allActive   Oper Multi-homing  : allActive
Output Example: show service system BGP EVPN ES information for manually configured ESI with all option
show service system bgp-evpn ethernet-segment name "ES23" all 
 
===============================================================================
Service Ethernet Segment
===============================================================================
Name                    : ES23
Eth Seg Type            : None               
Admin State             : Enabled            Oper State         : Up
ESI                     : 00:ca:ca:de:ba:ca:00:ee:ca:ca
Oper ESI                : 00:ca:ca:de:ba:ca:00:ee:ca:ca
Auto-ESI Type           : None               
AC DF Capability        : Include            
Multi-homing            : singleActive       Oper Multi-homing  : singleActive
ES SHG Label            : 524249             
Source BMAC LSB         : None 
Vprn Next Hop           : 1.1.1.1              
PW Port Id              : 20                 
PW Port Headend         : enabled            
ES Activation Timer     : 0 secs             
Oper Group              : (Not Specified)
Svc Carving             : manual             Oper Svc Carving   : manual
Cfg Range Type          : lowest-pref        
-------------------------------------------------------------------------------
DF Pref Election Information
-------------------------------------------------------------------------------
Preference     Preference     Last Admin Change        Oper Pref      Do No
Mode           Value                                   Value          Preempt
-------------------------------------------------------------------------------
non-revertive  20             01/17/2022 18:39:59      20             Enabled
-------------------------------------------------------------------------------
EVI Ranges: <none>
ISID Ranges: <none>
===============================================================================
-------------------------------------------------------------------------------
Vprn NextHop Evi Ranges
-------------------------------------------------------------------------------
From                To                  Last Update
-------------------------------------------------------------------------------
12345               12345               09/05/2022 19:01:28
-------------------------------------------------------------------------------
===============================================================================
EVI Information 
===============================================================================
EVI                 SvcId               Actv Timer Rem      DF
-------------------------------------------------------------------------------
20211               20211               0                   no
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
-------------------------------------------------------------------------------
DF Candidate list
-------------------------------------------------------------------------------
EVI                                     DF Address
-------------------------------------------------------------------------------
20211                                   2001:db8::2
20211                                   2001:db8::3
-------------------------------------------------------------------------------
Number of entries: 2
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Output Example: show service system BGP EVPN ES information for unconfigured auto-ESI and ESI
show service system bgp-evpn ethernet-segment name "ES-1"
============================================================
Service Ethernet Segment
============================================================
Name            : ES-1
Eth Seg Type    : None            
Admin State     : Enabled     Oper State         : Up
ESI             : None
Oper ESI        : None
Auto-ESI Type   : None
AC DF Capability: Exclude            
Multi-homing    : allActive   Oper Multi-homing  : allActive

BGP EVPN ES Field Descriptions describes BGP EVPN ES output fields.

Table 11. BGP EVPN ES Field Descriptions

Field

Description

Name

The Ethernet Segment name

Eth Seg Type

The Ethernet Segment type

Admin State

The administrative state for this service Ethernet Segment

Oper State

The operational state for this service Ethernet Segment

ESI

The Ethernet Segment Identifier

Oper ESI

The current operational Ethernet Segment Identifier

Auto-ESI Type

The auto-derived Ethernet Segment Identifier type

AC DF Capability

The AC-DF Capability status (Exclude or Include)

Multi-homing

The multi-homing information

Oper Multi-homing

The operational multi-homing state

ES SHG Label

The ES Split Horizon Group label

Source BMAC LSB

The source BMac least significant bit

Vprn Next Hop

The IP address associated with an Ethernet Segment

PW Port Id

The PW port ID

PW Port Headend

The PW port headend status

ES BMac Tbl Size

The ES BMac table size

ES BMac Entries

The ES BMac entries

Lag Id

The LAG ID

ES Activation Timer

The ES activation timer

Svc Carving

The service carving type

Oper Svc Carving

The operational service carving type

Cfg Range Type

The configured range type

DF Pref Election Information

Preference Mode

The preference mode

Preference Value

The preference value

Last Admin Change

The date and time of the last administrative change

Oper Pref Value

The operational preference value

Do No Preempt

The Do Not Preempt status

EVI Ranges

The EVI ranges

ISID Ranges

The ISID ranges

Vprn NextHop Evi Ranges

From

The beginning point of the EVI range

To

The ending point of the EVI range

Last Update

The date and time of the last range update

EVI Information

EVI

The EVPN instance

SvcId

The service ID

Actv Timer Rem

The active timer rem value

DF

The designated forwarder status

Number of entries:

The number of entries

EVI DF and Candidate List

DF Last Change

The date and time of the last DF candidate change

DF Candidates

The DF candidate IP address

Time Added

The date and time of the DF candidate addition

Q-Tag Ranges

Q-Tag Start

The Q-Tag start range value

Q-Tag End

The Q-Tag end range value

Last Changed

The date and time of the last change

VC-Id Ranges

VC-Id Start

The VC-Id start range value

VC-Id End

The VC-Id end range value

S-Tag Ranges

S-Tag Start

The S-Tag start value

S-Tag End

The S-Tag end value

S-Tag C-Tag Ranges

C-Tag Start

The C-Tag start value

C-Tag End

The C-Tag end value

Vxlan Instance Service Ranges

Svc Range Start

The service range start in this Vxlan instance

Svc Range End

The service range end in this Vxlan instance

ethernet-segment

Syntax

ethernet-segment name evi evi df

ethernet-segment name isid isid df

ethernet-segment name local-bias

Context

[Tree] (tools>dump>service>system>bgp-evpn ethernet-segment)

Full Context

tools dump service system bgp-evpn ethernet-segment

Description

This command shows the computed DF PE for a specified EVI or ISID when the evi or isid parameters are selected, respectively. When the local-bias parameter is used, the output lists the PEs that are in the candidate DF Election list for the ES, and whether local bias procedures are enabled on them.

The PE can only enable local bias procedures on up to three PEs that are attached to the same ES and use multihomed VXLAN services. If more than three PEs exists, the PEs are ordered by either lowest IP (if service-carving auto is used in the ES) or lowest preference (if preference-based service-carving is used) and only the top three PEs are considered for local bias.

Parameters

name

Specifies the name of the Ethernet Segment, up to 32 characters.

evi

Specifies the EVI.

Values

1 to 65535

isid

Specifies the ISID.

Values

1 to 16777215

local-bias

Specifies that output lists the PEs that are in the candidate DF Election list for the ES, and whether local bias procedures are enabled on them.

Platforms

All

Output

The following output is an example of Ethernet Segment information.

Output Example
# tools dump service system bgp-evpn ethernet-segment "ESI-71" evi 1 df 
[07/15/2015 21:52:08] Computed DF: 192.0.2.72 (Remote) (Boot Timer Expired: Yes) 

# tools dump service system bgp-evpn ethernet-segment "ESI-71" isid 20001 df 
[07/15/2015 21:52:21] Computed DF: 192.0.2.72 (Remote) (Boot Timer Expired: Yes)

# /tools dump service system bgp-evpn ethernet-segment "ESI-71" local-bias
 
-------------------------------------------------------------------------------
[02/05/2019 20:54:20] Vxlan Local Bias Information
----------------------------------------------------------------------+--------
Peer                                                                  | Enabled  
----------------------------------------------------------------------+--------
220.0.0.1                                                             | Yes      
220.0.0.2                                                             | Yes      
220.0.0.3                                                             | Yes      
220.0.0.4                                                             | No       
----------------------------------------------------------------------+--------
# tools dump service system bgp-evpn ethernet-segment "eslag1" local-bias
-------------------------------------------------------------------------------
[04/22/2018 15:40:22] Vxlan Local Bias Information
----------------------------------------------------------------------+--------
Peer                                                                  | Enabled  
----------------------------------------------------------------------+--------
10.20.1.1                                                             | Yes      
10.20.1.2                                                             | Yes      
10.20.1.4                                                             | Yes      
10.20.1.5                                                             | No       
-------------------------------------------------------------------------------
# tools dump service system bgp-evpn ethernet-segment "ES23" evi 20211 df 
[01/17/2022 17:00:39] Computed DF: 2001:db8::3 (Remote) (Boot Timer Expired: Yes) 
[01/17/2022 17:00:39] Computed Backup: 2001:db8::2 (This Node) 

# tools dump service system bgp-evpn ethernet-segment "ES23" evi 20212 df 
[01/17/2022 17:00:46] Evi not active on ethernet-segment

ethernet-segment

Syntax

ethernet-segment [name]

Context

[Tree] (show>service>sdp-using ethernet-segment)

Full Context

show service sdp-using ethernet-segment

Description

This command displays Ethernet Segment information associated with SDPs.

Parameters

name

Specifies the Ethernet segment name, up to 32 characters.

Platforms

All

etree

etree

Syntax

etree

Context

[Tree] (show>service>id etree)

Full Context

show service id etree

Description

This command displays the same information shown in the show service ID base context, with the addition of the role of each object in the VPLS E-Tree service.

The following labels identify the configuration of the SAPs and SDP bindings:

  • (L) indicates leaf-ac

  • (RL) indicates root-leaf-tag

Platforms

All

Output

The following output is an example of VPLS E-Tree information.

Output Example
*A:PE-6# show service id 2005 etree 

===============================================================================
Service Basic Information
===============================================================================
Service Id        : 2005                Vpn Id            : 0
Service Type      : VPLS 
Name              : etree-2005
Description       : (Not Specified)
Customer Id       : 1                   Creation Origin   : manual
Last Status Change: 05/08/2018 09:49:54 
Last Mgmt Change  : 05/08/2018 09:51:09 
Etree Mode        : Enabled 
Admin State       : Up                  Oper State        : Up
MTU               : 1514 
SAP Count         : 2                   SDP Bind Count    : 1
Snd Flush on Fail : Disabled            Host Conn Verify  : Disabled
SHCV pol IPv4     : None
Propagate MacFlush: Disabled            Per Svc Hashing   : Disabled
Allow IP Intf Bind: Disabled 
Fwd-IPv4-Mcast-To*: Disabled            Fwd-IPv6-Mcast-To*: Disabled
Mcast IPv6 scope  : mac-based 
Def. Gateway IP   : None 
Def. Gateway MAC  : None 
Temp Flood Time   : Disabled            Temp Flood        : Inactive
Temp Flood Chg Cnt: 0 
SPI load-balance  : Disabled 
TEID load-balance : Disabled 
Src Tep IP        : N/A 
Vxlan ECMP        : Disabled 
 
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier                               Type         AdmMTU  OprMTU  Adm  Opr
-------------------------------------------------------------------------------
sap:1/1/c1/1:2005 (L)                    q-tag        9000    9000    Up   Up
sap:1/1/c1/1:2006 (RL)                   q-tag        9000    9000    Up   Up
sdp:65:2005 (RL) S(192.0.2.5)            Spok         0       8974    Up   Down
-------------------------------------------------------------------------------
Legend: (L): Leaf-Ac, (RL): Root-Leaf-Tag
===============================================================================
* indicates that the corresponding row element may have been truncated.

eval-group-interface-template

eval-group-interface-template

Syntax

eval-group-interface-template name

Context

[Tree] (tools>perform>subscr-mgmt eval-group-interface-template)

Full Context

tools perform subscriber-mgmt eval-group-interface-template

Description

This command reapplies the specified group-interface template to all the group interfaces that were created using this template. This command can be used after changing the group-interface template, because not all the changed parameters are automatically applied to the existing group interfaces.

This command reports the total number of group interfaces linked to the template, the number of group interfaces that were changed or did not require a change, and the number of group interfaces for which a change was attempted but failed.

Parameters

name

Specifies a group-interface template name, up to 32 characters, as configured under configure subscriber-mgmt group-interface-template.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the command information.

Output Example
A:BNG-UPF# /tools perform subscriber-mgmt eval-group-interface-template "default" 
Group interface instances:
- total submitted : 1
- changed         : 1
- change failed   : 0

eval-ipoe-session

eval-ipoe-session

Syntax

eval-ipoe-session [svc-id service-id] [sap sap-id] [mac mac-address] [circuit-id circuit-id] [remote-id remote-id] [subscriber sub-ident-string]

Context

[Tree] (tools>perform>subscr-mgmt eval-ipoe-session)

Full Context

tools perform subscriber-mgmt eval-ipoe-session

Description

This command re-evaluates the mapping between authentication strings such as the SLA profile string and the actual profiles for the identified IPoE sessions.

Parameters

service-id

Specifies an existing subscriber service ID.

Values

1 to 2147483647

sap-id

Specifies a SAP ID, up to 255 characters.

mac-address

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

circuit-id

Specifies the circuit ID up to 127 characters.

remote-id

Specifies that information that goes into the remote-id sub-option in the DHCP relay packet, up to 255 characters.

sub-ident-string

Specifies an existing subscriber identification profile.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

eval-lease-state

eval-lease-state

Syntax

eval-lease-state [svc-id service-id] [sap sap-id] [subscriber sub-ident-string] [ip ip-address] [mac mac-address]

Context

[Tree] (tools>perform>subscr-mgmt eval-lease-state)

Full Context

tools perform subscriber-mgmt eval-lease-state

Description

This command evaluates lease state.

Parameters

sap-id

Specifies the physical port identifier portion of the SAP definition.

ip-address

Specifies the server’s IP address. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).

sub-ident-string

Specifies the subscriber ID string, up to 32 characters.

service-id

Specifies an existing service ID.

Values

1 to 2147483647

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

eval-msap

eval-msap

Syntax

eval-msap {policy msap-policy-name | msap sap-id}

Context

[Tree] (tools>perform>subscr-mgmt eval-msap)

Full Context

tools perform subscriber-mgmt eval-msap

Description

This command re-applies the managed SAP policy to the managed SAP identified by the specified sap-id or to all managed SAPs associated with the specified msap-policy name.

Parameters

msap-policy-name

Specifies an existing MSAP policy. The MSAP policy is re-applied to all associated managed SAPs.

sap-id

Specifies an MSAP SAP ID. The MSAP policy is re-applied to the specified MSAP.

Values

[port-id | lag-id]:qtag1

[port-id | lag-id]:qtag1.qtag2

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

eval-ppp-session

eval-ppp-session

Syntax

eval-ppp-session [svc-id service-id] [user-name user-name] [sap sap-id] [ip ip-address] [subscriber sub-ident-string]

eval-ppp-session [svc-id service-id] [user-name user-name] [sap sap-id] mac mac-address [session-id session-id] [ip ip-address] [subscriber sub-ident-string]

Context

[Tree] (tools>perform>subscr-mgmt eval-ppp-session)

Full Context

tools perform subscriber-mgmt eval-ppp-session

Description

This command evaluates PPP sessions.

Parameters

service-id

Specifies an existing subscriber service ID.

Values

1 to 2147483647

user-name

Specifies the PPP user name up to 253 characters.

sap-id

Specifies a SAP ID up to 255 characters.

ip-address

Specifies the peer’s IP address.

sub-ident-string

Specifies an existing subscriber identification profile.

mac-address

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

session-id

Specifies information about the ID of the PPP session.

Values

1 to 65535

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

eval-rates

eval-rates

Syntax

eval-rates

Context

[Tree] (tools>perform>subscr-mgmt>bonding eval-rates)

Full Context

tools perform subscriber-mgmt bonding eval-rates

Description

This command evaluates all bonding contexts and recalculates all reference rates. This command can be useful in handling changes that are not automatically tracked, such as adapting a scheduler rate in a QoS policy.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

eval-sap-template

eval-sap-template

Syntax

eval-sap-template name

Context

[Tree] (tools>perform>subscr-mgmt eval-sap-template)

Full Context

tools perform subscriber-mgmt eval-sap-template

Description

This command reapplies the SAP template to all the SAPs that were created using this template. This command can be used after changing the SAP template because not all the changed parameters are automatically applied to the existing SAPs.

This command reports the total number of SAPs linked to the template, the number of SAPs that changed or did not require a change, and the number of SAPs for which a change was attempted but failed.

Parameters

name

Specifies a SAP template name, up to 32 characters, as configured under configure subscriber-mgmt sap-template.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of the command information.

Output Example
A:BNG-UPF# /tools perform subscriber-mgmt eval-sap-template "default" 
Sap instances:
- total submitted : 1
- changed         : 1
- change failed   : 0

eval-slaac-host

eval-slaac-host

Syntax

eval-slaac-host [svc-id service-id] [sap sap-id] [subscriber sub-ident-string] [ipv6-address ipv6-prefix] [mac ieee-address]

Context

[Tree] (tools>perform>subscr-mgmt eval-slaac-host)

Full Context

tools perform subscriber-mgmt eval-slaac-host

Description

This command evaluates the SLAAC host.

Parameters

service-id

Specifies an existing subscriber service ID.

Values

1 to 2147483647

sap-id

Specifies a SAP ID, up to 255 characters.

sub-ident-string

Specifies an existing subscriber identification profile.

ieee-address

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

ipv6-prefix

Specifies an IPv6 prefix and prefix length.

Values

ipv6-prefix

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

evaluate-script

evaluate-script

Syntax

evaluate-script sap sap-id control-session acct-session-id action script-action [ dynsvc-policy name] [param-string string]

Context

[Tree] (tools>perform>service>dynamic-services evaluate-script)

Full Context

tools perform service dynamic-services evaluate-script

Description

This tools command performs the execution of a dynamic service script action as if the corresponding RADIUS attributes were received from RADIUS. It is possible to setup, modify or teardown a dynamic service associated with the specified control channel.

Note:

This command is not available in the MD-CLI.

Parameters

sap sap-id

specifies the dynamic service SAP id.

control-session acct-session-id

Specifies the accounting session id of the control channel associated with this dynamic service.

action script-action

Specifies the requested action: setup, modify or teardown.

dynsvc-policy name

Specifies the dynamic services policy to use for this action. Mandatory parameter for setup and modify actions. In case of a modify action, the dynamic services policy must be the same as the policy used at setup.

param-string string

Specifies the dynamic service parameter list. Mandatory parameter for setup and modify actions.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

evc

evc

Syntax

evc [port-id [vlan vlan-id]]

Context

[Tree] (show>elmi evc)

Full Context

show elmi evc

Description

This command displays Ethernet Virtual Connections (EVC). No argument displays all the EVC on the service router. The port and VLAN arguments display information related to EVC associated with the port and VLAN.

Parameters

port-id

Displays information related to the EVCs configured on the port.

Values

slot/mda/port

vlan-id

Specifies the VLAN Identifier of the EVC.

Values

0 to 4094, *

Platforms

All

Output

The following output is an example of E-LMI EVC information, and Output Fields: show elmi evc describes the output fields.

Output Example
*A:Dut-C# show elmi evc 
===============================================================================
ELMI EVC Table
===============================================================================
Port     Vlan  Status    Type  Evc Id                                          
-------------------------------------------------------------------------------
1/1/1    10    New-Act   P2p   EVC11110                                        
1/1/3    30    New-Act   P2p   EVC11220                                        
1/1/5    100   Act       P2p   EVC115100                                       
1/1/5    200   Act       P2p   EVC115200                                       
-------------------------------------------------------------------------------
Number of Evcs : 4
===============================================================================
*A:Dut-C#


A:Dut-C# show elmi evc 1/1/5 
===============================================================================
ELMI EVC Table
===============================================================================
Port     Vlan  Status    Type  Evc Id                                          
-------------------------------------------------------------------------------
1/1/5    100   Act       P2p   EVC115100                                       
1/1/5    200   Act       P2p   EVC115200                                       
-------------------------------------------------------------------------------
Number of Evcs : 2
===============================================================================
A:Dut-C#


*A:Dut-C# show elmi evc 1/1/5 vlan 100 
===============================================================================
Evc Detailed Information
===============================================================================
Port          : 1/1/5                   vlanId        : 100
Evc Status    : Act                     Evc Type      : P2p
Evc Identifier: EVC115100
===============================================================================
*A:Dut-C#
Table 12. Output Fields: show elmi evc

Field

Description

Port

Port identifier.

Vlan

Vlan identifier.

Status

New-Act — New and active.

Act — Active.

Type

Connection type.

EVC Id

EVC identifier.

event-control

event-control

Syntax

event-control [application-id [event-name | event-number]]

event-control application-id event-name detail

Context

[Tree] (show>log event-control)

Full Context

show log event-control

Description

This command displays event control settings for events including whether the event is suppressed or generated and the severity level for the event.

If no options are specified all events, alarms and traps are listed.

Parameters

application-id

Only displays event control for the specified application.

Default

All applications.

The following are some sample applications:

Values

anysec, application_assurance, aps, atm, auto_prov, bfd, bgp, bier, bmp, ccag, cflowd, chassis, cpmhwfilter, cpmhwqueue, debug, dhcp, dhcps, diameter, dot1x, dynsvc, efm_oam, elmi, ering, eth_cfm, etun, filter, fpe, gsmp, gtp, gtungrp, icl, igh, igmp, igmp_snooping, ip, ipfix, ipsec, ipsec_cpm, isis, l2tp, lag, ldap, ldp, li, lldp, logger, macsec, mcac, mcpath, mc_redundancy, mgmt_core, mirror, mld, mld_snooping, mpls, mpls_tp, mpls_lmgr, mrp, msdp, nat, nge, ntp, oam, open_flow, ospf, pcap, pcep, pfcp, pim, im_snooping, port, ppp, pppoe, pppoe_clnt, profile, ptp, pxc, python, qos, radius, rib_api, rip, rip_ng, route_next_hop, route_policy, rpki, rsvp, security, sflow, snmp, sr_policy, stp, subscr_mgmt, sub_host_trk, svcmgr, system, tip, tls, user, user_db, video, vrrp, vrtr, wlan_gw, wpp

event-name

Only displays event control for the named application event, up to 32 characters.

Default

All events for the application.

event-number

Only displays event control for the specified application event number.

Default

All events for the application.

Platforms

All

Output

The following output is an example of event control information.

Event-Control Output Field Descriptions describes the output fields for the event control.

Output Example
A:gal171# show log event-control
=======================================================================
Log Events
=======================================================================
Application
 ID#    Event Name                       P   g/s     Logged     Dropped
-----------------------------------------------------------------------
BGP:
   2001 bgpEstablished                   MI  gen          0           0
   2002 bgpBackwardTransition            WA  gen          0           0
   2003 tBgpMaxPrefix90                  WA  gen          0           0
   2004 tBgpMaxPrefix100                 CR  gen          0           0
L  2005 sendNotification                 WA  gen          0           0
L  2006 receiveNotification              WA  gen          0           0
L  2007 bgpInterfaceDown                 WA  gen          0           0
L  2008 bgpConnNoKA                      WA  gen          0           0
L  2009 bgpConnNoOpenRcvd                WA  gen          0           0
L  2010 bgpRejectConnBadLocAddr          WA  gen          0           0
L  2011 bgpRemoteEndClosedConn           WA  gen          0           0
L  2012 bgpPeerNotFound                  WA  gen          0           0
L  2013 bgpConnMgrTerminated             WA  gen          0           0
L  2014 bgpTerminated                    WA  gen          0           0
L  2015 bgpNoMemoryPeer                  CR  gen          0           0
L  2016 bgpVariableRangeViolation        WA  gen          0           0
L  2017 bgpCfgViol                       WA  gen          0           0
CFLOWD:
   2001 cflowdCreated                    MI  gen          0           0
   2002 cflowdCreateFailure              MA  gen          0           0
   2003 cflowdDeleted                    MI  gen          0           0
   2004 cflowdStateChanged               MI  gen          0           0
   2005 cflowdCleared                    MI  gen          0           0
   2006 cflowdFlowCreateFailure          MI  gen          0           0
   2007 cflowdFlowFlushFailure           MI  gen          0           0
   2008 cflowdFlowUnsuppProto            MI  sup          0           0
CCAG:
CHASSIS:
   2001 cardFailure                      MA  gen          0           0
   2002 cardInserted                     MI  gen          4           0
   2003 cardRemoved                      MI  gen          0           0
   2004 cardWrong                        MI  gen          0           0
   2005 EnvTemperatureTooHigh            MA  gen          0           0
...

DEBUG:
L  2001 traceEvent                       MI  gen          0           0
DOT1X:
FILTER:
   2001 filterPBRPacketsDropped          MI  gen          0           0
IGMP:
   2001 vRtrIgmpIfRxQueryVerMismatch     WA  gen          0           0
   2002 vRtrIgmpIfCModeRxQueryMismatch   WA  gen          0           0
IGMP_SNOOPING:
IP:
L  2001 clearRTMError                    MI  gen          0           0
L  2002 ipEtherBroadcast                 MI  gen          0           0
L  2003 ipDuplicateAddress               MI  gen          0           0
L  2004 ipArpInfoOverwritten             MI  gen          0           0
L  2005 fibAddFailed                     MA  gen          0           0
L  2006 qosNetworkPolicyMallocFailed     MA  gen          0           0
L  2007 ipArpBadInterface                MI  gen          0           0
L  2008 ipArpDuplicateIpAddress          MI  gen          0           0
L  2009 ipArpDuplicateMacAddress         MI  gen          0           0
ISIS:
   2001 vRtrIsisDatabaseOverload         WA  gen          0           0
   2002 vRtrIsisManualAddressDrops       WA  gen          0           0
   2003 vRtrIsisCorruptedLSPDetected     WA  gen          0           0
   2004 vRtrIsisMaxSeqExceedAttempt      WA  gen          0           0
   2005 vRtrIsisIDLenMismatch            WA  gen          0           0
   2006 vRtrIsisMaxAreaAddrsMismatch     WA  gen          0           0
....
USER:
L  2001 cli_user_login                   MI  gen          2           0
L  2002 cli_user_logout                  MI  gen          1           0
L  2003 cli_user_login_failed            MI  gen          0           0
L  2004 cli_user_login_max_attempts      MI  gen          0           0
L  2005 ftp_user_login                   MI  gen          0           0
L  2006 ftp_user_logout                  MI  gen          0           0
L  2007 ftp_user_login_failed            MI  gen          0           0
L  2008 ftp_user_login_max_attempts      MI  gen          0           0
L  2009 cli_user_io                      MI  sup          0          48
L  2010 snmp_user_set                    MI  sup          0           0
L  2011 cli_config_io                    MI  gen       4357           0
VRRP:
   2001 vrrpTrapNewMaster                MI  gen          0           0
   2002 vrrpTrapAuthFailure              MI  gen          0           0
   2003 tmnxVrrpIPListMismatch           MI  gen          0           0
   2004 tmnxVrrpIPListMismatchClear      MI  gen          0           0
   2005 tmnxVrrpMultipleOwners           MI  gen          0           0
   2006 tmnxVrrpBecameBackup             MI  gen          0           0
L  2007 vrrpPacketDiscarded              MI  gen          0           0
VRTR:
   2001 tmnxVRtrMidRouteTCA              MI  gen          0           0
   2002 tmnxVRtrHighRouteTCA             MI  gen          0           0
   2003 tmnxVRtrHighRouteCleared         MI  gen          0           0
   2004 tmnxVRtrIllegalLabelTCA          MA  gen          0           0
   2005 tmnxVRtrMcastMidRouteTCA         MI  gen          0           0
   2006 tmnxVRtrMcastMaxRoutesTCA        MI  gen          0           0
   2007 tmnxVRtrMcastMaxRoutesCleared    MI  gen          0           0
   2008 tmnxVRtrMaxArpEntriesTCA         MA  gen          0           0
   2009 tmnxVRtrMaxArpEntriesCleared     MI  gen          0           0
   2011 tmnxVRtrMaxRoutes                MI  gen          0           0
======================================================================= 
A:ALA-1#
A:ALA-1# show log event-control ospf
=======================================================================
Log Events
=======================================================================
Application
 ID#    Event Name                       P   g/s     Logged     Dropped
-----------------------------------------------------------------------
   2001 ospfVirtIfStateChange            WA  gen          0           0
   2002 ospfNbrStateChange               WA  gen          1           0
   2003 ospfVirtNbrStateChange           WA  gen          0           0
   2004 ospfIfConfigError                WA  gen          0           0
   2005 ospfVirtIfConfigError            WA  gen          0           0
   2006 ospfIfAuthFailure                WA  gen          0           0
   2007 ospfVirtIfAuthFailure            WA  gen          0           0
   2008 ospfIfRxBadPacket                WA  gen          0           0
   2009 ospfVirtIfRxBadPacket            WA  gen          0           0
   2010 ospfTxRetransmit                 WA  sup          0           0
   2011 ospfVirtIfTxRetransmit           WA  sup          0           0
   2012 ospfOriginateLsa                 WA  sup          0         404
   2013 ospfMaxAgeLsa                    WA  gen          3           0
   2014 ospfLsdbOverflow                 WA  gen          0           0
   2015 ospfLsdbApproachingOverflow      WA  gen          0           0
   2016 ospfIfStateChange                WA  gen          2           0
   2017 ospfNssaTranslatorStatusChange   WA  gen          0           0
   2018 vRtrOspfSpfRunsStopped           WA  gen          0           0
   2019 vRtrOspfSpfRunsRestarted         WA  gen          0           0
   2020 vRtrOspfOverloadEntered          WA  gen          1           0
   2021 vRtrOspfOverloadExited           WA  gen          0           0
   2022 ospfRestartStatusChange          WA  gen          0           0
   2023 ospfNbrRestartHelperStatusChange WA  gen          0           0
   2024 ospfVirtNbrRestartHelperStsChg   WA  gen          0           0
=======================================================================
A:ALA-1# 

A:ALA-1# show log event-control ospf ospfVirtIfStateChange
=======================================================================
Log Events
=======================================================================
Application
 ID#    Event Name                       P   g/s     Logged     Dropped
-----------------------------------------------------------------------
   2001 ospfVirtIfStateChange            WA  gen          0           0
=======================================================================
A:ALA-1# 
A:dut-c# show log event-control "BGP" tBgpMaxNgPfxLmtThresholdReached detail 
===============================================================================
Log event "tBgpMaxNgPfxLmtThresholdReached"
===============================================================================
Severity                              : major 
Generated                             : true 
Count                                 : 0 
Drop count                            : 1 
Throttle                              : false 
Specific throttle                     : false 
Specific throttle limit               : 0 
Specific throttle interval (s)        : 0 
Specific throttle by default          : false 
Specific throttle limit default       : 0 
Specific throttle interval default(s) : 0 
Repeat                                : false 
Source stream                         : main
A:node-2# show log event-control "mgmt_core"
=======================================================================
Log Events
=======================================================================
Application
 ID#    Event Name                       P   g/s     Logged     Dropped
-----------------------------------------------------------------------
 L 2001 mdConfigChange                   MI  sup          0         197
 L 2002 mdOcConfigChange                 MI  sup          0           0
 L 2003 mdBofConfigChange                MI  sup          0          23
 L 2004 mdDebugConfigChange              MI  sup          0           0
=======================================================================
Table 13. Event-Control Output Field Descriptions

Label

Description

Application

The application name.

ID#

The event ID number within the application.

L ID#

An "L” in front of an ID represents event types that do not generate an associated SNMP notification. Most events do generate a notification, only the exceptions are marked with a preceding "L”.

Event Name

The event name.

P

CL — The event has a cleared severity or priority.

CR — The event has critical severity or priority.

IN — The event has indeterminate severity or priority.

MA — The event has major severity or priority.

MI — The event has minor severity or priority.

WA — The event has warning severity or priority.

g/s

gen — The event will be generated or logged by event control.

sup — The event will be suppressed or dropped by event control.

thr — Specifies that throttling is enabled.

Logged

The number of events logged or generated.

Dropped

The number of events dropped/suppressed.

Severity

The severity level of the event (cleared, indeterminate, critical, major, minor, or warning).

Generated

Indicates whether the log event is enabled (true) or suppressed (false).

Count

The number of events logged or generated.

Drop count

The number of events dropped/suppressed.

Throttle

Indicates whether the event is subject to global throttling (true or false).

Specific throttle

Indicates whether the event is subject to specific per event throttling (true or false).

Specific throttle limit

The configured number of events per interval for specific throttling.

Specific throttle interval (s)

The configured interval over which the specific throttling limit is applied.

Specific throttle by default

Indicates whether the specific throttling is enabled or not when it has not been explicitly configured.

Specific throttle limit default

The default number of events per-interval for specific throttling of this event.

Specific throttle interval default (s)

The default interval over which the specific default throttling limit is applied.

Repeat

Specifies that the log event should be repeated every minute until the underlying condition is cleared.

Source stream

Specifies the event source (main, security, change, debug or li).

event-handling

event-handling

Syntax

event-handling

Context

[Tree] (show>log event-handling)

Full Context

show log event-handling

Description

Commands in this context display Event Handling System (EHS) information.

Platforms

All

event-handling

Syntax

event-handling

Context

[Tree] (clear>log event-handling)

Full Context

clear log event-handling

Description

Commands in this context clear Event Handling System (EHS) information.

Platforms

All

event-log

event-log

Syntax

event-log event-log-name syslog

Context

[Tree] (show>app-assure>group event-log)

Full Context

show application-assurance group event-log

Description

This command displays event log information.

Parameters

event-log-name

Specifies the event log name, up to 32 characters.

syslog

Specifies to display syslog information.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Output

The following is an output example displaying event log information:

Output Example
*A:Dut-B# show  application-assurance group 1:1 event-log "sampleLog" syslog
===============================================================================
Application Assurance Group 1:1 Event Log "sampleLog" Syslog
===============================================================================
Event-log admin status : down
Description            : (Not Specified)
Address                : (Not Specified)
Port                   : 514
VLAN ID                : (Not Specified)
Facility               : local7
Severity               : info
-------------------------------------------------------------------------------
ISA                                   Events Sent                 Events Failed
-------------------------------------------------------------------------------
1/2                                             0                             0
2/1                                             0                             0
2/2                                             0                             0
===============================================================================
*A:Dut-B#

event-log

Syntax

event-log log-event url file-url

event-log log-event isa mda-id [ url file-url]

Context

[Tree] (tools>dump>app-assure>group event-log)

Full Context

tools dump application-assurance group event-log

Description

This command displays application-assurance event-log information.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

event-log

Syntax

event-log event-log-name

Context

[Tree] (clear>app-assure>group event-log)

Full Context

clear application-assurance group event-log

Description

This command clears the application assurance event log.

Parameters

event-log-name

Specifies the event log name, up to 32 characters.

Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

event-logs

event-logs

Syntax

event-logs [failure | degrade] [ active | cleared]

Context

[Tree] (show>port>ethernet>efm-oam event-logs)

Full Context

show port ethernet efm-oam event-logs

Description

This command displays all event logs.

Parameters

failure | degrade

Only show logs with the specified severity.

active | cleared

Only show logs with the specified state.

Platforms

All

event-parameters

event-parameters

Syntax

event-parameters [application-id [event-name | event-number]]

Context

[Tree] (show>log event-parameters)

Full Context

show log event-parameters

Description

This command displays an event's (or all events) common parameters and specific parameters. This allows a user to know what parameters can be passed from a triggering event to the triggered EHS script.

There is a common event parameter for all log events called 'timestamp' that contains the same information as 'gentime’, but in a different format and unit. The 'timestamp' parameter is only available to python3 applications.

Parameters

application-id

Displays event parameters for the specified application.

Default

All applications.

The following are some sample applications:

Values

anysec, application_assurance, aps, atm, bfd, bgp, calltrace, ccag, cflowd, chassis, cpmhwfilter, cpmhwqueue, debug, dhcp, dhcps, diameter, dot1x, dynsvc, efm_oam, elmi, ering, eth_cfm, etun, filter, fpe, gsmp, gtungrp, icl, igh, igmp, igmp_snooping, ip, ipfix, ipsec, ipsec_cpm, isis, l2tp, lag, ldap, ldp, li, lldp, logger, mcac, mcpath, mc_redundancy, mirror, mld, mld_snooping, mpls, mpls_tp, mrp, msdp, nat, ntp, oam, open_flow, ospf, pcep, pim, pim_snooping, port, ppp, pppoe, ptp, pxc, python, qos, radius, rip, rip_ng, route_next_hop, route_policy, rpki, rsvp, security, sflow, snmp, stp, subscr_mgmt, sub_host_trk, svcmgr, system, tip, tls, user, user_db, video, vrrp, vrtr, wlan_gw, wpp

event-name

Displays event parameters for the named application event up to 32 characters in length.

Default

All events for the application.

event-number

Displays event parameters for the specified application event number.

Default

All events for the application.

Values

0 — 4294967295

Platforms

All

Output

The following output is an example of log event parameter information.

Output Example
# show log event-parameters "oam" 2001
=======================================================================
Common Event Parameters
        appid
        name
        eventid
        severity
        subject
        gentime
Event Specific Parameters
        tmnxOamPingCtlOwnerIndex
        tmnxOamPingCtlTestIndex
        tmnxOamPingCtlTgtAddrType
        tmnxOamPingCtlTgtAddress
        tmnxOamPingResultsTestRunIndex
        tmnxOamPingResultsOperStatus
        tmnxOamPingResultsMinRtt
        tmnxOamPingResultsMaxRtt
        tmnxOamPingResultsAverageRtt
        tmnxOamPingResultsRttSumOfSquares
        tmnxOamPingResultsRttOFSumSquares
        tmnxOamPingResultsMtuResponseSize
        tmnxOamPingResultsSvcPing
        tmnxOamPingResultsProbeResponses
        tmnxOamPingResultsSentProbes
        tmnxOamPingResultsLastGoodProbe
        tmnxOamPingCtlTestMode
        tmnxOamPingHistoryIndex
=======================================================================

events

events

Syntax

events [local | remote]

Context

[Tree] (clear>port>eth>efm-oam events)

Full Context

clear port ethernet efm-oam events

Description

This command clears all link monitoring events on the port.

Parameters

local

Clears the local events only.

remote

Clears the remote events only.

Platforms

All

evpn

evpn

Syntax

evpn mac-dup-detect ieee-address

evpn mac-dup-detect all

Context

[Tree] (clear>service>id evpn)

Full Context

clear service id evpn

Description

This command clears a duplicate MAC and restarts the MAC duplication process. It also clears black-hole MACs.

Parameters

ieee-address

Specifies the MAC address, up to 30 characters.

all

Specifies that the clear command applies to all duplicate MACs.

Platforms

All

evpn

Syntax

evpn usage

Context

[Tree] (tools>dump>service evpn)

Full Context

tools dump service evpn

Description

This command displays the consumed EVPN resources in the system. The Vxlan Destinations include static VXLAN destinations as well as Ethernet Segment (ES) Vxlan destinations.

Platforms

All

Output

The following output is an example of the command information.

Output Example
*A:PE-1# tools dump service evpn usage            

vxlan-evpn-mpls usage statistics at 04/16/2018 17:56:02:

MPLS-TEP                                        :             0
VXLAN-TEP                                       :             3
Total-TEP                                       :      3/ 16383

Mpls Dests (TEP, Egress Label + ES + ES-BMAC)   :             0
Mpls Etree Leaf Dests                           :             0
Vxlan Dests (TEP, Egress VNI)                   :             5
Total-Dest                                      :      5/196607

Sdp Bind +  Evpn Dests                          :      5/245759
ES L2/L3 PBR                                    :      0/ 32767
Evpn Etree Remote BUM Leaf Labels               :             0

evpn

Syntax

evpn evpn-type

Context

[Tree] (show>router>bgp>routes evpn)

Full Context

show router bgp routes evpn

Description

Commands in this context displays BGP EVPN routes.

Platforms

All

evpn

Syntax

evpn usage

Context

[Tree] (tools>dump>service>id evpn)

Full Context

tools dump service id evpn

Description

This command shows the maximum number of EVPN-tunnel interface IP next hops per R-VPLS as well as the current usage for a specified R-VPLS service.

Platforms

All

Output

The following output is an example of tools dump EVPN usage information.

Output Example
*A:PE71# tools dump service id 504 evpn usage 
Evpn Tunnel Interface IP Next Hop: 1/8189

evpn-l2-oper-attrs

evpn-l2-oper-attrs

Syntax

evpn-l2-oper-attrs

Context

[Tree] (show>service>id>bgp-evpn evpn-l2-oper-attrs)

Full Context

show service id bgp-evpn evpn-l2-oper-attrs

Description

This command displays information of all the TEPs for which the peer advertised a Layer 2 extended community.

Platforms

All

Output

The following command displays an example of all the TEPs for which the peer advertised a Layer 2 extended community and Show EVPN L2 TEP Information Fields describes the output fields.

Output Example
show service id 110 bgp-evpn evpn-l2-oper-attrs 
===============================================================================
EVPN P2MP L2 Attributes
===============================================================================
TEP Address                             Oper State Oper Flags
-------------------------------------------------------------------------------
192.0.2.4                               Down       no-L2-comm
2001:db8::2                             Up         None
-------------------------------------------------------------------------------
Number of entries : 2
-------------------------------------------------------------------------------
===============================================================================
Table 14. Show EVPN L2 TEP Information Fields

Label

Description

EVPN P2MP L2 Attributes

TEP Address

The TEP address

Oper State

The operational state

Oper Flags

The operational flags

Number of entries

The total number of matching entries

evpn-mcast-gateway

evpn-mcast-gateway

Syntax

evpn-mcast-gateway {all | pim | mvpn}

Context

[Tree] (show>service>id evpn-mcast-gateway)

Full Context

show service id evpn-mcast-gateway

Description

This command displays the EVPN multicast gateway information.

Parameters

all

Displays EVPN mulitcast gateway information for the MVPN-to-EVPN Gateway (MEG) and PIM-to-EVPN Gateway (PEG) cases.

pim

Displays EVPN mulitcast gateway information for the PEG case.

mvpn

Displays EVPN mulitcast gateway information for the MEG case.

Platforms

All

Output

The following output is an example of EVPN multicast gateway information, and Show EVPN Multicast Gateway Information Fields describes the output fields.

Output Example
# show  service  id 2 evpn-mcast-gateway {all|pim|mvpn}
 
===============================================================================
Service Evpn Multicast Gateway
===============================================================================
Type                 : mvpn-pim               
Admin State          : Disabled  
DR Activation Timer  : 3 secs (default) 
Mvpn Evpn Gateway DR : Yes
Pim Evpn Gateway DR  : No
===============================================================================

The following output is an example of information displayed when the all or mvpn options are specified.

===============================================================================
Mvpn Evpn Gateway
===============================================================================  
DR Activation Timer Remaining : 1 sec
DR                            : Yes
DR Last Change                : 10/30/2019 14:03:30
===============================================================================
-------------------------------------------------------------------------------
Candidate list
-------------------------------------------------------------------------------
Orig-Ip                                               Time Added
-------------------------------------------------------------------------------
10.20.1.2                                             10/30/2019 14:03:30
10.20.1.3                                             10/30/2019 14:14:12
-------------------------------------------------------------------------------
Number of entries: 2
-------------------------------------------------------------------------------

The following output is an example of information displayed when the all or pim options are specified.

===============================================================================
Pim Evpn Gateway
===============================================================================  
DR Activation Timer Remaining : 0 sec
DR                            : No
DR Last Change                : 10/30/2019 14:03:30
===============================================================================
-------------------------------------------------------------------------------
Candidate list
-------------------------------------------------------------------------------
Orig-Ip                                               Time Added
-------------------------------------------------------------------------------
10.20.1.2                                             10/30/2019 14:03:30
10.20.1.3                                             10/30/2019 14:14:12
-------------------------------------------------------------------------------
Number of entries: 2
------------------------------------------------------------------------------- 

Show EVPN Multicast Gateway Information Fields describes the EVPN multicast gateway output fields.

Table 15. Show EVPN Multicast Gateway Information Fields

Label

Description

Service Evpn Multicast Gateway

Type

Displays the EVPN multicast gateway type

Admin State

Displays the administrative state

DR Activation Timer

Displays the DR activation timer value

Mvpn Evpn Gateway

Displays MVPN EVPN gateway designated router type

Pim Evpn Gateway DR

Displays the PIM EVPN gateway designated router type

Mvpn Evpn Gateway/Pim Evpn Gateway

DR Activation Timer Remaining

Displays the number of seconds remaining for the DR activation timer

DR

Indicates DR status

DR Last Change

Displays the date and time of the last DR change

Candidate list

Orig-Ip

Displays the originating IP address

Time Added

Displays the date and time of the candidate list entry

Number of entries

Displays the number of entries

evpn-mpls

evpn-mpls

Syntax

evpn-mpls [tep-ip-address]

Context

[Tree] (show>service evpn-mpls)

Full Context

show service evpn-mpls

Description

This command shows the remote EVPN-MPLS tunnel endpoints in the system.

Parameters

tep-ip-address

Specifies the IP address of a tunnel endpoint.

Values

a.b.c.d

Platforms

All

Output

Output Example
*A:PE70(4)# show service evpn-mpls 
===============================================================================
EVPN MPLS Tunnel Endpoints
===============================================================================
EvpnMplsTEP Address EVPN-MPLS Dest      ES Dest             ES BMac Dest
-------------------------------------------------------------------------------
192.0.2.69          3                   1                   1
192.0.2.71          2                   0                   0
192.0.2.72          3                   1                   1
192.0.2.73          2                   1                   0
192.0.2.254         1                   0                   0
-------------------------------------------------------------------------------
Number of EvpnMpls Tunnel Endpoints: 5
-------------------------------------------------------------------------------
===============================================================================
*A:PE70(4)# show service evpn-mpls 
<TEP ip-address>
 192.0.2.69   192.0.2.71   192.0.2.72   192.0.2.73   192.0.2.254


*A:PE70(4)# show service evpn-mpls 192.0.2.69 
===============================================================================
BGP EVPN-MPLS Dest
===============================================================================
Service Id                              Egr Label
-------------------------------------------------------------------------------
1                                       262140
1                                       262141
20000                                   262138
-------------------------------------------------------------------------------
===============================================================================

===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest
===============================================================================
Service Id          Eth Seg Id                              Egr Label
-------------------------------------------------------------------------------
1                   01:00:00:00:00:71:00:00:00:01           262141
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
BGP EVPN-MPLS ES BMac Dest
===============================================================================
Service Id               ES BMac                  Egr Label
-------------------------------------------------------------------------------
20000                    00:00:00:00:71:71        262138
-------------------------------------------------------------------------------
===============================================================================

evpn-mpls

Syntax

evpn-mpls esi esi [detail]

evpn-mpls esi esi instance instance-id [detail]

evpn-mpls es-bmac ieee-address

evpn-mpls [detail]

evpn-mpls instance instance-id [detail]

Context

[Tree] (show>service>id evpn-mpls)

Full Context

show service id evpn-mpls

Description

This command displays the existing EVPN-MPLS destinations for a specified service and all related information. The command allows filtering based on esi (for EVPN multi-homing) and es-bmac (for PBB-EVPN multi-homing) to display the EVPN-MPLS destinations associated to an Ethernet Segment Identifier (ESI).

Parameters

esi

Specifies a 10-byte ESI by which to filter the displayed information. For example, ESI-0 | ESI-MAX or 00-11-22-33-44-55-66-77-88-99 with any of these separators ('-',':',' ')

ieee-address

Specifies a 48-bit MAC address for which to display information. The parameter is entered in the form xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx, where xx represents a hexadecimal number.

instance-id

Specifies the instance ID.

Values

1,2

detail

Displays detailed information.

Platforms

All

Output

Output Example
show service id 110 evpn-mpls 
BGP EVPN-MPLS Dest (Instance 1)
===============================================================================
TEP Address                     Transport:Tnl     Egr Label  Oper  Mcast  Num
                                                             State        MACs
-------------------------------------------------------------------------------
2001:db8::2                     ldp:65542         524244     Up    bum    0
2001:db8::3                     ldp:65540         524250     Up    bum    0
-------------------------------------------------------------------------------
Number of entries : 2
===============================================================================

===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance 1)
===============================================================================
Eth SegId                       Num. Macs               Last Update
-------------------------------------------------------------------------------
01:b6:47:ff:00:00:00:00:01:00   1                       02/02/2023 12:48:43
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
show service id 110 evpn-mpls detail 
===============================================================================
BGP EVPN-MPLS Dest (Instance 1)
===============================================================================
TEP Address                     Transport:Tnl     Egr Label  Oper  Mcast  Num
                                                             State        MACs
-------------------------------------------------------------------------------
2001:db8::2                     ldp:65542         524244     Up    bum    0
  Oper Flags       : None
  Sup BCast Domain : No
  Last Update      : 02/02/2023 12:44:07
2001:db8::3                     ldp:65540         524250     Up    bum    0
  Oper Flags       : None
  Sup BCast Domain : No
  Last Update      : 02/02/2023 12:44:07
-------------------------------------------------------------------------------
Number of entries : 2
===============================================================================

===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance 1)
===============================================================================
Eth SegId                       Num. Macs               Last Update
-------------------------------------------------------------------------------
01:b6:47:ff:00:00:00:00:01:00   1                       02/02/2023 12:48:43
-------------------------------------------------------------------------------
Number of entries: 1
===============================================================================
show service id 110 evpn-mpls esi 01:b6:47:ff:00:00:00:00:01:00 detail 
===============================================================================
BGP EVPN-MPLS Ethernet Segment Dest (Instance: 1)
===============================================================================
Eth SegId                       Num. Macs               Last Update
-------------------------------------------------------------------------------
01:b6:47:ff:00:00:00:00:01:00   1                       02/02/2023 12:48:43
===============================================================================

===============================================================================
BGP EVPN-MPLS Dest TEP Info (Instance 1)
===============================================================================
TEP Address                             Egr Label         Transport:Tnl-  Oper
                                                          Id              State
-------------------------------------------------------------------------------
2001:db8::2                             524246            ldp:65542       Up
  Oper Flags       : None
  Last Update      : 02/02/2023 12:48:43
-------------------------------------------------------------------------------
Number of entries : 1
===============================================================================
show service id 20000 evpn-mpls es-bmac 00:00:00:00:71:71
===============================================================================
BGP EVPN-MPLS ES BMAC Dest
===============================================================================
vBmacAddr                       Num. Macs               Last Change
-------------------------------------------------------------------------------
00:00:00:00:71:71               1                       07/15/2015 19:44:10
===============================================================================
===============================================================================
BGP EVPN-MPLS ES BMAC Dest TEP Info
===============================================================================
TEP Address               Egr Label               Last Change
                          Transport               
-------------------------------------------------------------------------------
192.0.2.69                262138                  07/15/2015 19:44:10
                          ldp                      
-------------------------------------------------------------------------------
Number of entries : 1
-------------------------------------------------------------------------------
===============================================================================

The following table describes the EVPN-MPLS output fields.

Table 16. Show EVPN-MPLS Information Fields

Label

Description

vBmacAddr

Displays the vBmac address

Num. Macs

Displays the number of MACs

Last Change

Indicates the time of the most recent state changes

TEP Address

Displays the TEP address

Egr Label

Displays the egress label

Transport

Displays the transport type

Number of entries

Indicates the number of entries

Eth SegId

Displays the Ethernet Segment ID

Transport:Tnl-Id

Displays the tunnel type and tunnel ID of the EVPN-MPLS entry

Transport:Tnl

Displays the transport tunnel

Num. MAC

Displays the number of MACs

Oper State

Disaplays the operational state

Oper Flags

Displays the operational flags

Mcast

Displays the multicast information

Sup BCast Domain

Displays the Sup BCast Domain

evpn-proxy-db

evpn-proxy-db

Syntax

evpn-proxy-db [detail]

evpn-proxy-db [group grp-ip-address]

Context

[Tree] (show>service>id>igmp-snooping evpn-proxy-db)

[Tree] (show>service>id>mld-snooping evpn-proxy-db)

Full Context

show service id igmp-snooping evpn-proxy-db

show service id mld-snooping evpn-proxy-db

Description

This command displays the EVPN proxy database that is created when config>service>vpls> igmp/mld-snooping>evpn-proxy is enabled in the service. The EVPN proxy database is populated with local reports received on SAP or SDP binds but not with the received SMET routes. The output shows the IGMP and MLD versions of the database entries that are conveyed in the SMET routes advertised for the entries.

Parameters

grp-ip-address

Specifies the group IP address, in dotted decimal notation.

detail

Specifies detailed information for the EVPN proxy database.

Platforms

All

Output

The following output is an example of EVPN proxy database information.

Output Example
A:PE-2# show service id 4000 igmp-snooping evpn-proxy-db 
 
===============================================================================
IGMP Snooping Evpn-Proxy-reporting DB for service 4000
===============================================================================
Group Address    Mode     Up Time        Num Sources    V1   V2   V3
-------------------------------------------------------------------------------
239.0.0.1        exclude  0d 00:53:55    0                        V3
239.0.0.2        include  0d 00:53:55    1                        V3
-------------------------------------------------------------------------------
Number of groups: 2
===============================================================================

EVPN Proxy Field Descriptions describes EVPN proxy output fields.

Table 17. EVPN Proxy Field Descriptions

Field

Description

Group Address

Group IP address

Mode

IGMPv3 or MLDv2 mode

Up Time

Time that the group is added

Num Sources

Number of sources

V1

IGMP/MLD version of the database

V2

IGMP/MLD version of the database

V3

IGMP version of the database

excessive-sources

excessive-sources

Syntax

excessive-sources [service-id service-id sap-id sap-id]

Context

[Tree] (show>system>security>cpu-protection excessive-sources)

Full Context

show system security cpu-protection excessive-sources

Description

This command displays sources exceeding their per-source rate limit.

Parameters

service-id

Displays information for services exceeding their per-source rate limit.

sap-id

Displays information for SAPs exceeding their per-source rate limit.

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS

excessive-sources

Syntax

excessive-sources

Context

[Tree] (clear>cpu-protection excessive-sources)

Full Context

clear cpu-protection excessive-sources

Description

This command clears the records of sources exceeding their per-source rate limit.

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-7s, 7750 SR-14s, 7950 XRS

exercise

exercise

Syntax

exercise aps-id {protect | working}

Context

[Tree] (tools>perform>aps exercise)

Full Context

tools perform aps exercise

Description

This command performs an exercise request on the protection or working circuit.

Parameters

aps-id

Specifies the APS ID.

Values

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

protect

This command clears a physical port that is acting as the protection circuit for the APS group.

working

This command clears a physical port that is acting as the working circuit for this APS group.

Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e

expand-wildcard-path

expand-wildcard-path

Syntax

expand-wildcard-path path

Context

[Tree] (tools>dump>system>telemetry expand-wildcard-path)

Full Context

tools dump system telemetry expand-wildcard-path

Description

This command expands XML Paths (XPaths) to include multiple wildcards.

Parameters

path

Specifies the XPath that contains the wildcards.

Platforms

All

Output

Output Example
# tools dump system telemetry expand-wildcard-path "/state/card/.../oper-state"
=======================================================================
Expanded paths
=======================================================================
/state/card[slot-number=*]/hardware-data/oper-state
/state/card[slot-number=*]/mda[mda-slot=*]/hardware-data/oper-state
/state/card[slot-number=*]/mda[mda-slot=*]/flex[group-index=*]/oper-state
=======================================================================

explicit-subscriber-map

explicit-subscriber-map

Syntax

explicit-subscriber-map

Context

[Tree] (show>subscr-mgmt explicit-subscriber-map)

Full Context

show subscriber-mgmt explicit-subscriber-map

Description

This command displays explicit subscriber mappings.

Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Output

The following output is an example of subscriber management explicit subscriber map information.

Output Example
B:Dut-A>show>subscr-mgmt# explicit-subscriber-map
===============================================================================
Explicit Subscriber Map
===============================================================================
Key                              Sub profile
                                 SLA profile
-------------------------------------------------------------------------------
sub_ident_A_1                    sub_prof80
                                 sla_prof80
-------------------------------------------------------------------------------
Number of Explicit Subscriber Mappings : 1
===============================================================================
B:Dut-A>show>subscr-mgmt#

Explicit Subscriber Map Field Descriptions describes subscriber management explicit subscriber map output fields.

Table 18. Explicit Subscriber Map Field Descriptions

Field

Description

Key

The explicit subscriber mapping

Number of Explicit Subscriber Mappings

The number of configured explicit subscriber mappings

export

export

Syntax

export

Context

[Tree] (clear>router>isis export)

Full Context

clear router isis export

Description

This command re-evaluates route policies participating in the export mechanism, either as importers or exporters of routes.

Platforms

All

export

Syntax

export

Context

[Tree] (clear>router>ospf export)

[Tree] (clear>router>ospf3 export)

Full Context

clear router ospf export

clear router ospf3 export

Description

This command re-evaluates all effective export policies.

Platforms

All

export

Syntax

export

Context

[Tree] (clear>router>rip export)

Full Context

clear router rip export

Description

This command re-evaluates RIP export policies.

Platforms

All

export

Syntax

export

Context

[Tree] (clear>router>ripng export)

Full Context

clear router ripng export

Description

This command re-evaluates RIPng export policies.

Platforms

All

extranet-interface

extranet-interface

Syntax

extranet-interface

Context

[Tree] (show>router>pim extranet-interface)

Full Context

show router pim extranet-interface

Description

This command displays extranet interface information.

Platforms

All