u Commands
ue
ue
Syntax
ue [ieee-address] [detail]
Context
[Tree] (show>call-trace>wlan-gw ue)
Full Context
show call-trace wlan-gw ue
Description
This command gives an overview of either all traces or a specific trace on the WLAN-GW.
Parameters
- ieee-address
-
Displays information about the MAC address of this UE.
- detail
-
Displays detailed information about the job.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of traces of the UE being monitored.
Output ExampleNode# show call-trace hosts
===============================================================================
Call-trace hosts
===============================================================================
MAC address Mask-name Status Msgs
-------------------------------------------------------------------------------
00:0a:95:9d:68:16 N/A running 16
-------------------------------------------------------------------------------
Number of call-trace debug jobs: 1
=============================================================================
Node# show call-trace hosts detail
===============================================================================
Call-trace detail
===============================================================================
MAC address : 00:0a:95:95:34:0a Status : running
Capture format : pcap
Nr. of captured msgs : 4 Time limit : 86400s
Size of captured msgs : 2620B Data limit : 10MB
Started : NOV 12 2013, 15:28:17 UTC
Live output : N/A
-------------------------------------------------------------------------------
ue
Syntax
ue [vlan qtag] [mpls-label label] [retail-svc-id service-id] [ssid service-set-id] [previous-access-point ip-address] [bd bridge-id]
ue mac ieee-address [bd bridge-id]
Context
[Tree] (show>subscr-mgmt>wlan-gw ue)
Full Context
show subscriber-mgmt wlan-gw ue
Description
This command displays User Equipment (UE) information.
Parameters
- qtag
-
Displays information about the VLAN Q-tag present in the traffic received from this UE.
- label
-
Displays information about the MPLS label present in the traffic received from this UE.
- service-id
-
Specifies an existing service ID. If no svc-id is specified then it indicates that the interface is a network interface in the Base router instance.
- service-set-id
-
Displays information about the Service Set ID (SSID) of this UE.
- ip-address
-
Displays information about the IP address of the previous Access Point (AP) of this UE.
- bridge-id
-
Displays specified HLE bridge domain information of this UE.
- ieee-address
-
Displays information about the MAC address of this UE.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of WLAN-GW information.
Output ExampleSystem# show subscriber-mgmt wlan-gw ue
======================================================================
User Equipments
======================================================================
MAC address : 00:02:00:00:00:39
----------------------------------------------------------------------
VLAN Q-tag : 1
MPLS label : (Not Specified)
Tunnel router : 50
Tunnel remote IP address : 20C9::7:1:2
Tunnel local IP address : 2032::1:1:7
Retail service : N/A
SSID : 1
Previous Access Point IP : (Not Specified)
IMSI : (Not Specified)
Last move time : 2013/07/02 07:45:31
----------------------------------------------------------------------
No. of UE: 1
======================================================================
System#
ue
Syntax
ue [wlan-gw-group wlan-gw-group-id] [mda mda-id] [next-index index] [summary] [ detail] [bd bridge-id] [ue-mac ieee-address] [ue-vlan vlan] [state-description state] [tunnel-router router-instance] [tunnel-source-ip ip-address] [tunnel-destination-ip ip-address] [tunnel-type tunnel-type] [ue-ip ipv4-address] [dhcp6-addr ipv6-address] [slaac-prefix ipv6-address] [aggregate-summary] [soft-quota-exhausted]
Context
[Tree] (tools>dump>wlan-gw ue)
Full Context
tools dump wlan-gw ue
Description
This command dumps User Equipment (UE) information.
The summary option displays a count of UEs per ISA and the aggregate-summary displays a count of matched UEs over the whole WLAN-GW.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
Use the following command to display detailed UE information.
tools dump wlan-gw ue detail
Output Example
===============================================================================
Matched 1 session on ESA #1 VM #2
===============================================================================
Bridge Domain : 0
UE-Mac : 00:00:00:07:04:02 UE-vlan : 41
UE IP Addr : N/A
UE Timeout : N/A
DHCPv6 Timeout : N/A SLAAC Timeout : N/A
DHCPv6 IA-NA ID : N/A RA Timeout : N/A
DHCPv6 Addr : N/A
SLAAC Prefix : N/A
Description : L2-user
Auth/CoA-time : 02/27/2023 14:24:57 Retail Service : N/A
Tunnel MDA/VM : esa-1/2 Tunnel Router : 2000
Shaper : Default
Tunnel Src IP : 10.10.2.114
Tunnel Dst IP : 72.1.0.1
Tunnel Type : GRE Tunnel Class : Access
GRE Protocol : 0x6558 GRE Version : 0x0
MPLS Label : N/A NGE Label : N/A
Anchor SAP : esa-1/2/nat-out-ip:2049.3
Remote Type : N/A Remote Service : N/A
Remote Src IP : N/A
Remote Dst IP : N/A
AP-Mac : Unknown AP-RSSI : Unknown
AP-SSID : Unknown
Last-forward : 02/27/2023 14:24:57 Last-move : None
Session Timeout : None Idle Timeout : 600 sec
Acct Update : None Acct Interval : N/A
Acct Session-Id : N/A
Acct Policy : N/A
NAT Policy : N/A
Redirect Policy : N/A
IP Filter : N/A
App-profile : N/A
L2 Service : MyVplsServiceName
Rx Oper PIR : N/A Rx Oper CIR : N/A
Tx Oper PIR : N/A Tx Oper CIR : N/A
Rx Frames : 1 Rx Octets : 290
Tx Frames : 0 Tx Octets : 0
Quota Direction : N/A
Hard Octets : N/A Soft Octets : N/A
-------------------------------------------------------------------------------
===============================================================================
uefi-vars
uefi-vars
Syntax
uefi-vars cpm-slot
Context
[Tree] (tools>dump>system>security>secure-boot uefi-vars)
Full Context
tools dump system security secure-boot uefi-vars
Description
This command displays the secure-boot Unified Extensbile Firmware Interface (UEFI) variables.
Parameters
- cpm-slot
-
Specifies the CPM slot.
Platforms
7750 SR-1-24D, 7750 SR-1-46S, 7750 SR-1-48D, 7750 SR-1-92S, 7750 SR-1x-48D, 7750 SR-1x-92S, 7750 SR-s, 7950 XRS-20e
un-sid
un-sid
Syntax
un-sid [mt {0 | 2}] [prefix ipv6-prefix[/prefix-length]] [adv-router system-id | hostname] [algo algo-id]
Context
[Tree] (show>router>isis>srv6 un-sid)
Full Context
show router isis segment-routing-v6 un-sid
Description
This command displays IS-IS SRv6 uN SIDs.
Parameters
- ipv6-prefix[/prefix-length]
-
Displays routes only matching the specified IP address and length.
- system-id | hostname
-
Displays information for the specific IS-IS advertising router. The host name can be up to 38 characters.
- algo-id
-
Displays information for the specified algorithm.
Platforms
7450 ESS, 7750 SR, 7750 SR-s, 7950 XRS, VSR
Output
uN SID Output describes the uN SID output fields.
Use the following command to display uN SID information.
show router isis segment-routing-v6 un-sid
Output Example
===============================================================================
Rtr Base ISIS Instance 0 SRv6 uN SID Table
===============================================================================
Prefix AdvRtr MT Lvl/Typ
Sid Behavior Flags Algo
-------------------------------------------------------------------------------
110::/96 Dut-A 0 1/Int.
110::/96 End PSP - 128
===============================================================================
Label |
Description |
---|---|
Prefix |
Displays the prefix |
AdvRtr |
Displays the advanced router information |
MT |
Displays the MT information |
Lvl/Typ |
Displays the level or type information |
SID |
Displays the Segment ID |
Behavior |
Displays the behavior information |
Flags |
Displays the flag information |
Algo |
Displays the algorithm information |
uni
uni
Syntax
uni [port-id]
Context
[Tree] (show>elmi uni)
Full Context
show elmi uni
Description
This command displays information about E-LMI mode, status, number of EVCs (SAPs) configured on the port for all of the ports on the service router.
Parameters
- port-id
-
Displays UNI information for the specified port.
Platforms
All
Output
The following output is an example of elmi uni information.
Output Example: show elmi uni*A:Dut-C# show elmi uni
===============================================================================
ELMI UNI-N Table
===============================================================================
Port Mode Status #Evcs Uni Identifier
-------------------------------------------------------------------------------
1/1/1 None Up 0 10/100 Ethernet TX
1/1/2 None Up 0 port-21
1/1/3 None Up 0 10/100 Ethernet TX
1/1/4 None Up 0 10/100 Ethernet TX
1/1/5 Uni-N Up 2 UNI115
1/1/6 None Up 0 10/100 Ethernet TX
1/1/7 None Up 0 10/100 Ethernet TX
1/1/8 None Up 0 10/100 Ethernet TX
1/1/9 None Up 0 10/100 Ethernet TX
1/1/10 None Up 0 10/100 Ethernet TX
1/1/11 None Up 0 10/100 Ethernet TX
1/1/12 None Up 0 10/100 Ethernet TX
1/1/13 None Up 0 10/100 Ethernet TX
1/1/14 None Up 0 10/100 Ethernet TX
1/1/15 None Up 0 10/100 Ethernet TX
1/1/16 None Up 0 10/100 Ethernet TX
1/1/17 None Up 0 10/100 Ethernet TX
...
===============================================================================
*A:Dut-C#
*A:Dut-C# show elmi uni 1/1/5
===============================================================================
Uni-N Detailed Information
===============================================================================
Uni Mode : Uni-N Link Status : Up
Uni Identifier: UNI115
T391 : 10 seconds T392 : 15 seconds
N393 : 4 UniType : Bundling
Rx Enq. Time : 02/18/2010 17:11:44 Tx Status Time : 02/18/2010 17:11:44
Rx Enq Msg : 24 Tx Status Msg : 24
Rx Check Time : 02/18/2010 17:12:34 Tx Check Time : 02/18/2010 17:12:34
Rx Inv. SeqNum: 0 Tx Async Status Msg : 0
Enq Timeouts : 0 Discard Msg : 0
===============================================================================
*A:Dut-C#
unicast
unicast
Syntax
unicast [router router-instance | service-name service-name]
Context
[Tree] (show>system>ptp unicast)
Full Context
show system ptp unicast
Description
This command displays unicast negotiation information.
Parameters
- router-instance
-
Displays the information for the specified router instance.
- service-name
-
Specifies the service name, up to 64 characters, that is used to identify the router instance.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following command displays Unicast information and Output fields: PTP unicast describes the output fields.
show system ptp unicast
===============================================================================
IEEE 1588/PTP Unicast Negotiation Information
===============================================================================
Router
IP Address
Dir Type Rate Duration State Time
-------------------------------------------------------------------------------
Base
1.4.1.21
Tx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:14:09
1
1.2.1.20
Rx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:14:19
1.2.1.20
Tx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:13:25
1.2.1.20
Tx Sync 64 pkt/s 300 Granted 04/21/2013 19:13:30
1.2.1.20
Rx DelayReq 64 pkt/s 300 Granted 04/21/2013 19:13:30
1.2.1.20
Tx DelayRsp 64 pkt/s 300 Granted 04/21/2013 19:13:30
1.3.1.19
Rx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:13:16
1.3.1.19
Rx Sync 64 pkt/s 300 Granted 04/21/2013 19:13:21
1.3.1.19
Tx DelayReq 64 pkt/s 300 Granted 04/21/2013 19:13:21
1.3.1.19
Rx DelayRsp 64 pkt/s 300 Granted 04/21/2013 19:13:21
2
1.1.1.21
Tx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:14:08
1.1.1.21
Tx Sync 64 pkt/s 300 Granted 04/21/2013 19:14:15
1.1.1.21
Rx DelayReq 64 pkt/s 300 Granted 04/21/2013 19:14:15
1.1.1.21
Tx DelayRsp 64 pkt/s 300 Granted 04/21/2013 19:14:15
-------------------------------------------------------------------------------
PTP Peers : 4
Total Packet Rate : 578 packets/second
===============================================================================
The following command displays Unicast router information and Output fields: PTP unicast describes the output fields.
show system ptp router unicast
===============================================================================
IEEE 1588/PTP Unicast Negotiation Information
===============================================================================
Router
IP Address
Dir Type Rate Duration State Time
-------------------------------------------------------------------------------
1
1111:2222:3333:4444:5555:70:1:4
Rx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:14:19
1111:2222:3333:4444:5555:70:1:4
Tx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:13:25
1.2.1.20
Tx Sync 64 pkt/s 300 Granted 04/21/2013 19:13:30
1.2.1.20
Rx DelayReq 64 pkt/s 300 Granted 04/21/2013 19:13:30
1.2.1.20
Tx DelayRsp 64 pkt/s 300 Granted 04/21/2013 19:13:30
1.3.1.19
Rx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:13:16
1.3.1.19
Tx DelayReq 64 pkt/s 300 Granted 04/21/2013 19:13:21
1.3.1.19
Rx DelayRsp 64 pkt/s 300 Granted 04/21/2013 19:13:21
-------------------------------------------------------------------------------
PTP Peers : 2
Total Packet Rate : 385 packets/second
===============================================================================
Label |
Description |
---|---|
Router |
The name of the router instance |
IP Address |
The IP address of the PTP peer |
Dir |
The direction |
Type |
The type |
Rate |
The rate |
Duration |
The duration |
State |
The grant state |
Time |
The date and time |
Input |
The input packet statistics |
Output |
The output packet statistics |
unicast
Syntax
unicast
Context
[Tree] (show>service>id>ptp unicast)
Full Context
show service id ptp unicast
Description
This command displays unicast negotiation information.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS
Output
The following output is an example of PTP unicast information and Output fields: system PTP unicast describes the output fields.
Output Example
show service id ptp unicast
===============================================================================
IEEE 1588/PTP Unicast Negotiation Information
===============================================================================
Router
IP Address
Dir Type Rate Duration State Time
-------------------------------------------------------------------------------
1
1111:2222:3333:4444:5555:70:1:4
Rx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:14:19
1111:2222:3333:4444:5555:70:1:4
Tx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:13:25
1.2.1.20
Tx Sync 64 pkt/s 300 Granted 04/21/2013 19:13:30
1.2.1.20
Rx DelayReq 64 pkt/s 300 Granted 04/21/2013 19:13:30
1.2.1.20
Tx DelayRsp 64 pkt/s 300 Granted 04/21/2013 19:13:30
1.3.1.19
Rx Announce 1 pkt/2 s 300 Granted 04/21/2013 19:13:16
1.3.1.19
Tx DelayReq 64 pkt/s 300 Granted 04/21/2013 19:13:21
1.3.1.19
Rx DelayRsp 64 pkt/s 300 Granted 04/21/2013 19:13:21
-------------------------------------------------------------------------------
PTP Peers : 2
Total Packet Rate : 385 packets/second
===============================================================================
Label | Description |
---|---|
Router |
The name or ID of the router instance |
IP Address |
The IP address of the PTP peer |
Dir |
The direction (transmitted or received) of the unicast negotiation packet |
Type |
The unicast negotiation packet type |
Rate |
The rate of packet transmission or reception |
Duration |
The duration of the packet transmission or reception interval, in seconds |
State |
The state of the negotiation |
Time |
The date and time that the negotiation state was changed |
PTP Peers |
The total number of PTP peers |
Total Packet Rate |
The total number of unicast negotiation packets transmitted and received per second |
unknown-origin
unknown-origin
Syntax
unknown-origin
Context
[Tree] (show>subscr-mgmt>errors unknown-origin)
Full Context
show subscriber-mgmt errors unknown-origin
Description
This command lists errors of an unknown origin. Errors shown do have a corresponding SAP ID or a SDP ID.
Platforms
7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR
unsubscribe-from
unsubscribe-from
Syntax
unsubscribe-from log-id log-id
Context
[Tree] (tools>perform>log unsubscribe-from)
Full Context
tools perform log unsubscribe-from
Description
This command cancels the subscription of the current CLI session to the specified CLI log.
Parameters
- log-id
-
Specifies the log ID from which cancellation is requested.
Platforms
All
update-path
update-path
Syntax
update-path {lsp lsp-name path current-path-name new-path new-path-name}
Context
[Tree] (tools>perform>router>mpls update-path)
Full Context
tools perform router mpls update-path
Description
This command enables you to instruct MPLS to replace the path of a primary or secondary LSP. The primary or secondary LSP path is indirectly identified via the current-path-name value. The same path name cannot be used more than once in a given LSP name.
This command applies to both CSPF LSP and to a non-CSPF LSP. This command will only work when the specified current-path-name has the adaptive option enabled. The adaptive option can be enabled at the LSP level or the path level.
The new path must have been configured in the CLI or provided via SNMP. The CLI command for entering the path is
configure router mpls path path-name
The command fails if any of the following conditions exist:
-
The specified current-path-name of this LSP does not have the adaptive option enabled.
-
The specified new-path-name value does not correspond to a previously defined path.
-
The specified new-path-name value exists but is being used by any path of the same LSP, including this one.
When you execute this command, MPLS performs the following procedures:
-
MPLS performs a single MBB attempt to move the LSP path to the new path.
-
If the MBB is successful, MPLS updates the new path
-
MPLS writes the corresponding NHLFE in the data path if this path is the current backup path for the primary.
-
If the current path is the active LSP path, it will update the path, write the new NHLFE in the data path that will cause traffic to switch to the new path.
-
-
If the MBB is not successful, the path retains its current value.
-
The update-path MBB has the same priority as the manual re-signal MBB.
Platforms
All
uplink
uplink
Syntax
uplink
uplink mgw-address-cache [arec] [snaptr] [srv]
uplink mgw-address-cache apn apn-domain-string
Context
[Tree] (show>router>gtp uplink)
Full Context
show router gtp uplink
Description
This command displays operational information related to the usage of GTP uplink interfaces (Gn, S2a, S2b) in this routing context.
Parameters
- arec
-
Displays A-records.
- snaptr
-
Displays Straightforward-NAPTR information.
- srv
-
Displays SRV records.
- apn-domain-string
-
Specifies the Access Point Name (APN) of this DNS cache entry.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of GTP uplink information.
Output ExampleNode# show router 10 gtp uplink mgw-address-cache
===============================================================================
Mobile Gateway address cache
===============================================================================
APN : full.dotted.apn.apn.epc.mnc010.mcc206.3gppnetwork.org
-------------------------------------------------------------------------------
Mobile Gateway address : 5.20.1.2
Time left (s) : 3587
-------------------------------------------------------------------------------
No. of cache entries: 1
No. of Mobile gateways: 1
===============================================================================
uplink
Syntax
uplink
uplink session imsi imsi apn apn-string
uplink session [peer-address ip-address] [router router-instance] [remote-control-teid teid] [local-control-teid teid] [detail]
uplink session imsi imsi
Context
[Tree] (show>subscr-mgmt>gtp uplink)
Full Context
show subscriber-mgmt gtp uplink
Description
This command displays box-wide operational information related to the GTP uplink interfaces (Gn, S2a, S2b).
Parameters
- imsi
-
Specifies the IMSI (International Mobile Subscriber Identity) of this UE.
- apn-string
-
Specifies the APN (Access Point Name).
- ip-address
-
Specifies the IP address of the Mobile Gateway (PGW or GGSN).
- router-instance
-
Specifies the identifier of the virtual router instance where the GTP tunnel is terminated.
- remote-control-teid teid
-
Specifies the remote control plane Tunnel Endpoint Identifier (TEID).
- local-control-teid teid
-
Specifies the local control plane TEID.
- detail
-
Displays detailed information.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of GTP uplink information
Output ExampleNode# show subscriber-mgmt gtp uplink session detail
===============================================================================
GTP sessions
===============================================================================
IMSI : 206100000000041
APN : full.dotted.apn.mnc010.mcc206.gprs
-------------------------------------------------------------------------------
Mobile Gateway router : "Base"
Mobile Gateway address : 5.20.1.2
Remote control TEID : 1119232
Local control TEID : 4293918976
Bearer 5 rem TEID : 1074861061
Bearer 5 loc TEID : 4293919013
-------------------------------------------------------------------------------
No. of GTP sessions: 1
===============================================================================
uplink
Syntax
uplink
Context
[Tree] (clear>router>gtp uplink)
Full Context
clear router gtp uplink
Description
This command clears information related to the GTP uplink state for the routing context.
Platforms
7750 SR, 7750 SR-e, 7750 SR-s, VSR
upnp
upnp
Syntax
upnp
Context
[Tree] (show>service upnp)
Full Context
show service upnp
Description
Commands in this context display UPnP policy parameters.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
upnp-mappings
upnp-mappings
Syntax
upnp-mappings subscriber sub-ident-string protocol {tcp | udp} outside-port port-number
upnp-mappings subscriber sub-ident-string
Context
[Tree] (clear>nat upnp-mappings)
Full Context
clear nat upnp-mappings
Description
This command remove UPnP mappings for the specified subscriber. If protocol and outside-port are not specified, then all UPnP mappings of subscriber will be removed.
Parameters
- subscriber sub-ident-string
-
clears mappings for the specified subscriber.
- protocol {tcp | udp}
-
Clears the mappings for the specified protocol.
- outside-port port-number
-
Clears mappings for the specified outside-port.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
upnp-policy
upnp-policy
Syntax
upnp-policy policy-name
upnp-policy policy-name statistics
upnp-policy
Context
[Tree] (show>service>upnp upnp-policy)
Full Context
show service upnp upnp-policy
Description
This commands displays upnp-policy related information.
Without any parameters the system outputs a list of configured UPnP policies.
Parameters
- policy-name
-
The system displays the configuration of the specified policy.
- statistics
-
The system displays statistics for the specified policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of this command.
Output Exampleshow service upnp upnp-policy
===============================================================================
UPnP policies
===============================================================================
Policy Description
-------------------------------------------------------------------------------
test
-------------------------------------------------------------------------------
No. of UPnP policies: 1
===============================================================================
show service upnp upnp-policy "test"
===============================================================================
UPnP Policy test
===============================================================================
Description : (Not Specified)
Mapping limit : 256
Strict mode : false
HTTP listening port : 5000
Last Mgmt Change : 01/26/2015 19:23:41
-------------------------------------------------------------------------------
Active mappings : 2
Mapped subscribers : 1
Associated subscribers : 1
===============================================================================
show service upnp upnp-policy "test" statistics
===============================================================================
UPnP Policy test Statistics
===============================================================================
rx SSDP M-SEARCH : 109
rx HTTP GET device description : 0
rx HTTP GET service description : 109
rx UPnP AddPortMapping : 6
rx UPnP ClearPortMapping : 0
rx UPnP DeletePortMapping : 1
rx UPnP ForceTermination : 0
rx UPnP GetConnectionTypeInfo : 0
rx UPnP GetExternalAddress : 6
rx UPnP GetGenericPortMappingEntry : 43
rx UPnP GetNATRSIPStatus : 8
rx UPnP GetSpecificPortMappingEntry : 1
rx UPnP GetStatusInfo : 49
rx UPnP RequestConnection : 0
rx UPnP SetConnectionType : 0
rx UPnP unsupported optional action : 6
rx UPnP invalid request : 0
tx SSDP M-SEARCH : 109
tx TCP reset : 0
tx HTTP OK : 109
tx UPnP OK : 101
tx UPnP error : 19
drop no memory : 0
portmapping created : 4
portmapping updated : 1
portmapping failed: conflict with other host : 0
portmapping failed: conflict with pinhole : 0
portmapping failed: hit limits : 0
portmapping failed: other reason : 0
rx HTTP (UN)SUBSCRIBE : 0
tx HTTP 501 Not Implemented : 0
drop rate limited : 0
===============================================================================
upnp-policy-statistics
upnp-policy-statistics
Syntax
upnp-policy-statistics policy-name
Context
[Tree] (clear>nat upnp-policy-statistics)
Full Context
clear nat upnp-policy-statistics
Description
This command clears UPnP policy statistics.
Parameters
- policy-name
-
Clears UPnP policy statistics for the specified policy.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
uptime
uptime
Syntax
uptime
Context
[Tree] (show uptime)
Full Context
show uptime
Description
This command displays the time since the system started.
Platforms
All
Output
The following output is an example of uptime information, and Uptime Output describes the output field.
Output ExampleA:ALA-1# show uptime
System Up Time : 11 days, 18:32:02.22 (hr:min:sec)
A:ALA-1#
Label |
Description |
---|---|
System Up Time |
Displays the length of time the system has been up in days, hr:min:sec format. |
url-filter
url-filter
Syntax
url-filter [url-filter-name]
url-filter url-filter-name isa mda-id/esa-vm-id [detail]
url-filter url-filter-name web-service [profile profile-name]
Context
[Tree] (show>app-assure>group url-filter)
Full Context
show application-assurance group url-filter
Description
This command displays information about the configured url-filter policy along with some associated raw statistics. These output statistics are:
-
Vlan Id: Vlan id used by the aa interfaces
-
Admin Status: Up / Down
-
Oper Status: Up / Down
-
Oper Flags: adminDown, no-aa-if, aa-if-down, icap-server-down
-
Default Action: default policy action taken by the url-filter
-
ICAP HTTP Redirect: HTTP redirect Policy
-
AQP Referenced: Yes/No
-
HTTP Request: Number of subscriber HTTP requests
-
HTTP Errors: Impossible to send an ICAP request, this can be caused by either no TCP connection available, associated flow with a drop action due to another aqp policy, system resource exhausted
-
ICAP Request: Number of ICAP request sent
-
ICAP Errors: ICAP request timeout, unexpected ICAP response, internal TCP errors.
-
Custom-x-header: Name of the custom-x-header, if configured. If it is not configured, the value is "Not Specified".
In addition to these counters the system will count the type of action taken by the url-filter policy (allow, block, redirect, default) as well as the type of responses received from the icap server (allow, block, redirect, late).
Parameters
- url-filter-name
-
Specifies the name of the url-filter policy.
- mda-id/esa-vm-id
-
Specifies the mda-id/esa-vm-id reference of the ISA card.
- detail
-
Specifies detailed statistics related to the ISA card.
- profile-name
-
Specifies the name of a configured profile for web service, up to 256characters.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output is an example of url-filter information.
Web-service URL Filter Show Command Field Descriptions describes the output fields.
URL Filter Show Command Output Example# show application-assurance group 1 url-filter "web-serv1" isa 7/2
=============================================================================
Application Assurance Group 1 URL Filter " web-serv1" ISA 7/2
=============================================================================
Description : Url filter WebService
Admin Status : Up
Oper Status : Down
Oper Flags : web-service-down
DNS Oper Status : Down
DNS Oper Flags : unreachable
HTTP Request Filtering : all
AQP Referenced : Yes
-----------------------------------------------------------------------------
URL Stats Summary
-----------------------------------------------------------------------------
Total Requests : 0 Default Action : 0
Requests Allowed: 0 Reqs Block/Redir: 0
-----------------------------------------------------------------------------
Local Filter
-----------------------------------------------------------------------------
allow-list : allowlist1
Admin Status : Up
Oper Status : Up
Oper Flags : <none>
Number of URLs : 1
URL-List Lookups : 0
Match : 0
Miss : 0
deny-list : denylist1
Admin Status : Up
Oper Status : Up
Oper Flags : <none>
Number of URLs : 1
Default Action : block-all
HTTP Redirect : (Not Specified)
URL-List Lookups : 0
Match : 0
Miss : 0
Default Action : 0
deny-list : denylist2
Admin Status : Up
Oper Status : Up
Oper Flags : <none>
Number of URLs : 1
Default Action : block-all
HTTP Redirect : (Not Specified)
URL-List Lookups : 0
Match : 0
Miss : 0
Default Action : 0
-----------------------------------------------------------------------------
Web Service Filter
-----------------------------------------------------------------------------
Classifier : web-service-1
Category-set-id : 1
default-profile : prof1
VLAN Id : 1
FQDN : nokia-api.webtitancloud.com
DNS Address : 12.0.0.100
Default Action : allow
HTTP Redirect : ws
AA Interface : to_isa_7/2
Service : VPRN 1
SAP Id : 7/2/aa-svc:1
Client IP : 10.1.1.2/31
Web Service Filter Stats
Class Ovrd Lkup : 0 Class Ovrd match: 0
Cache Lookup : 0 Cache size : 0
Cache match : 0 Cache max size : 20971520
Cache miss : 0
URL Request : 0 Default Action : 0
URL Response : 0 Late Response : 0
Allow : 0 Packet Discard: 0
Block : 0 Octet Discard : 0
Redirect : 0
-----------------------------------------------------------------------------
ISA 7/2 Web Service Connection Stats
-----------------------------------------------------------------------------
Established Connections : 0 of 0 connections
Request Rate : 0 per second
Round Trip Time : 0 microseconds
=============================================================================
Web-service URL Filter Show Command Output Example
# show application-assurance group 1 url-filter "testFilter" web-service
-------------------------------------------------------------------------------
Web services for url-filter "testFilter"
-------------------------------------------------------------------------------
Category-set-id : 1
-------------------------------------------------------------------------------
===============================================================================
Profile Categories
===============================================================================
Profile Name Blocked Categories Allowed Categories
-------------------------------------------------------------------------------
testProfile 1 54
===============================================================================
# show application-assurance group 1 url-filter "testFilter" web-
service profile "testProfile"
-------------------------------------------------------------------------------
Web service profile "testProfile"
-------------------------------------------------------------------------------
Category-set-id : 1
Description :
-------------------------------------------------------------------------------
===============================================================================
Blocked Categories
===============================================================================
Category Id Category Name
-------------------------------------------------------------------------------
25 Personal Webpages
===============================================================================
===============================================================================
Allowed Categories
===============================================================================
Category Id Category Name
-------------------------------------------------------------------------------
1 Compromised
2 Criminal Skills/Hacking
3 Hate Speech
4 Illegal Drugs
5 Phishing/Fraud
6 Spyware and Malicious Sites
7 Nudity
8 Mature
9 Pornography/Sex
10 Violence
11 Weapons
12 Anonymizer
13 Computers and Technology
14 Download Sites
15 Translator
16 Alcohol
17 Health
18 Pharmacy
19 Tobacco
20 Gambling
21 Games
22 Cars/Transportation
23 Dating & Relationships
24 Home/Leisure
26 Restaurants
27 Sports and Recreation
28 Travel
29 Government
30 Military
31 Non-profits
32 Politics and Law
33 Religion
34 Education
35 Art
36 Entertainment and Videos
37 Humor
38 Music
39 News
40 Finance
41 Internet Watch Foundation List
42 Shopping
43 Chat/IM
44 Community Sites
45 Social Networking
46 Web-based Email
47 Portal Sites
48 Search Engines
49 Online Ads
50 Business/Services
51 Job Search
52 Real Estate
53 Spam
54 Miscellaneous
55 Uncategorized
===============================================================================
Label |
Description |
---|---|
Category-set-id |
The ID of the category set used for URL categorization. |
Description |
The description of the web-service profile. |
Profile Name |
The name of the web-service profile. |
Blocked Categories |
The blocked categories for the web-service profile. |
Allowed Categories |
The allowed categories for the web-service profile. |
Category Id |
The ID of the blocked or allowed category. |
Category Name |
The name of the blocked or allowed category. |
url-list
url-list
Syntax
url-list url-list-name
Context
[Tree] (show>app-assure>group url-list)
Full Context
show application-assurance group url-list
Description
This command displays information about the configured URL list.
Parameters
- url-list-name
-
Specifies the name of the URL list.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
Output
The following output are examples of show URL list information.
Output Example# show application-assurance group 1 url-list "allow-list1"
=============================================================================
Application Assurance Group 1 url-list "allow-list1"
=============================================================================
Description : Default Url-list object
Size : standard
Host Expressions : enabled
Admin Status : Up
Oper Status : Up
Oper Flags : <none>
File deployed to ISAs : Yes
-----------------------------------------------------------------------------
Upgrade Statistics
-----------------------------------------------------------------------------
Last Success : 06/19/2020 02:57:06
Deployed
File Name : cf1:/expr_15000.vm.only.expr
URL Entries : 15000 (100.00% full)
URL Characters : 249390 ( 5.08% full)
URL Host Expr Entries: 15000 (100.00% full)
Blank/Comment Lines : 60519
Last Attempt : 06/19/2020 02:57:06
Result : Success
URL List Show Command Field Descriptions describes the URL list show command output fields.
Label |
Description |
---|---|
Description |
The description of the URL list |
Size |
[standard | extended] Size parameter for the URL list |
Host Expressions |
If the host is enabled or disabled |
Admin Status |
[Up | down] - Administrative status of the URL list |
Oper Status |
[Up | down] - Operational status of the URL list |
Oper Flags |
[admin-down | file-does-not-exist |invalid-file-format | too-many-urls | switch-over-error] |
File Deployed to ISA |
[Yes | No] - This flag describes if the file located in the compact flash is the one deployed in the ISA, in the event the file is overwritten and before the admin upgrade command is used this flag will display "No". |
Upgrade Statistics |
|
Last Success |
Last time the list was successfully upgraded |
File Name |
File name for the last successful upgrade |
URL Entries |
Number of URLs loaded at the last success and percentage to full |
URL Characters |
Number of characters loaded at the last success and percentage to full |
URL Host Expr Entries |
URL host expression entries |
Blank/CommentLines |
Number of blank or commented out lines |
Last Attempt |
Last time the operator tried to upgrade the list |
Result |
[Success | Failure]. Result of the last upgrade |
File Name |
File name for the last upgrade attempt |
usage-monitor
usage-monitor
Syntax
usage-monitor app-group [app-group-name] count
usage-monitor application [application-name] count
usage-monitor charging-group [charging-group-name] count
usage-monitor count
usage-monitor status
Context
[Tree] (show>app-assure>group>aa-sub usage-monitor)
Full Context
show application-assurance group aa-sub usage-monitor
Description
This command displays per-subscriber usage-monitoring statistics.
Parameters
- app-group-name
-
Specifies an application group name, up to 32 characters.
- application-name
-
Specifies an application name, up to 32 characters.
- charging-group-name
-
Specifies a charging group name, up to 32 characters.
- count
-
Displays counters.
- status
-
Displays the status.
Platforms
7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR
user
user
Syntax
user [user-id] [detail]
user [user-id] lockout
Context
[Tree] (show>system>security user)
Full Context
show system security user
Description
This command displays user registration information.
If no command line options are specified, summary information for all users displays.
Parameters
- user-id
-
Displays information for the specified user.
- detail
-
Displays detailed user information to the summary output.
- lockout
-
Displays information about any users who are currently locked out.
Platforms
All
Output
The following outputs are examples of user output information.
Show System Security User Output Fields describes user output fields.
Output Exampleshow system security user
===============================================================================
Users
===============================================================================
User ID New User Permissions Password Login Failed Local
Pwd console ftp li snmp netconf grpc Expires Attempt Logins Conf
-------------------------------------------------------------------------------
admin n y n n n n never 2 0 y
-------------------------------------------------------------------------------
Number of users : 1
===============================================================================
show system security user detail
===============================================================================
Users
===============================================================================
User ID New User Permissions Password Login Failed Local
Pwd console ftp li snmp netconf grpc Expires Attempt Logins Conf
-------------------------------------------------------------------------------
admin n y y n y y n never 2 0 y
-------------------------------------------------------------------------------
Number of users : 1
===============================================================================
===============================================================================
User Configuration Detail
===============================================================================
===============================================================================
user id : admin
-------------------------------------------------------------------------------
console parameters
-------------------------------------------------------------------------------
new pw required : no cannot change pw : no
home directory :
restricted to home : no
save when restrict*: no
login exec file :
profile : default
profile : administrative
locked-out : no
-------------------------------------------------------------------------------
snmp parameters
-------------------------------------------------------------------------------
auth protocol : hmac-sha2-512
auth key : ffb8bb4392ccab627d903db396cd928fdde5ac8cdb78e7b6ecb39bde2c
3ec67c8380cd0d91dfe6f30c041d9819a34e297994c3b759e68f2db075
4bc408e3a001
privacy protocol : cfb128-aes-256
privacy key : ffb8bb4392ccab627d903db396cd928fdde5ac8cdb78e7b6ecb39bde2c
3ec67c
group : moje
===============================================================================
show system security user lockout
===============================================================================
Currently Failed Login Attempts
===============================================================================
User ID Remaining Login attempts Remaining Lockout Time (min:sec)
-------------------------------------------------------------------------------
user123 N/A 9:56
-------------------------------------------------------------------------------
Number of users : 1
===============================================================================
Label |
Description |
---|---|
User ID |
The name of a system user. |
Users |
|
New Pwd |
y — The user must change their password at the next login. n — The user does not need to change their password at the next login. |
User Permissions |
console: y — The user is authorized for console access. n — The user is not authorized for console access. ftp: y — The user is authorized for FTP access. n — The user is not authorized for FTP access. li: y — The user is authorized for LI access. n — The user is not authorized for LI access. snmp: y — The user is authorized for SNMP access. n — The user is not authorized for SNMP access. netconf: y — The user is authorized for NETCONF access. n — The user is not authorized for NETCONF access. grpc: y — The user is authorized for gRPC access. n — The user is not authorized for gRPC access. |
Password Expires |
The number of days after which the user must change their password. |
Login Attempts |
The number of times that the user has attempted to log in, irrespective of whether the login succeeded or failed. |
Failed Logins |
The number of unsuccessful login attempts. |
Local Conf |
y — Password authentication is based on the local password database. n — Password authentication is not based on the local password database. |
Number of users |
The total number of listed users. |
User Configuration Detail |
|
new pw required |
yes — The user must change their password at the next login. no — The user does not need to change their password at the next login. |
cannot change pw |
yes — The user does not have the ability to change their password. no — The user has the ability to change their password. |
home directory |
The local home directory for the user for both console and FTP access. |
restricted to home |
yes — The user is not allowed to navigate to a directory higher in the directory tree on the home directory device. no — The user is allowed to navigate to a directory higher in the directory tree on the home directory device. |
save when restricted |
Whether configuration save operations are allowed when the user is restricted to home. |
login exec file |
The user’s login exec file which executes whenever the user successfully logs in to a console session. |
profile |
The security profiles associated with the user. |
locked-out |
Whether the user is currently locked out, and, if they are locked out, how much time remains before the user can attempt to log into the node again. |
SNMP Parameters |
|
auth protocol |
The SNMPv3 authentication protocol. |
auth key |
The SNMPv3 authentication key. |
privacy protocol |
The SNMPv3 privacy protocol. |
privacy protocol |
The SNMPv3 privacy key. |
group |
The group for which the protocols apply. |
Currently Failed Login Attempts |
|
Remaining Login Attempts |
The number of login attempts remaining before the user is locked out. |
Remaining Lockout Time (min:sec) |
The number of minutes and seconds remaining until the lockout expires and the user can attempt to log in again. |
With the introduction of the PKI on an SR (SSH Server) the authentication process can be done via PKI or password. SSH client usually authenticate via PKI and password if PKI is configured on the client. In this case PKI takes precedence over password in most clients.
All client authentications are logged and display in the show>system>security>user detail. Pass/Fail Login Attempts shows the rules where pass and fail attempts are logged.
Authentication Order |
Client (such as, putty) |
Server (such as, SR) |
CLI Show System Security Attempts (SR) |
||
---|---|---|---|---|---|
Private Key Programmed |
Public Key Configured |
Password Configured |
Logins Attempts |
Failed Logins |
|
1. Public Key |
Yes |
Yes |
N/A |
Increment |
|
2. Password |
Yes |
Yes (No match between client and server. Go to password.) |
Yes |
Increment |
|
Yes |
No |
Yes |
Increment |
||
No |
N/A |
Yes |
Increment |
||
No |
N/A |
No |
Increment |
||
1. Public Key (only) |
Yes |
Yes |
N/A |
Increment |
|
Yes |
Yes (No match between client and server. Go to password.) |
Increment |
|||
Yes |
N/A |
Increment |
|||
No |
N/A |
Increment |
users
users
Syntax
users
Context
[Tree] (show users)
Full Context
show users
Description
Displays console user login and connection information.
Platforms
All
Output
The following output is an example of user information.
Show Users Output Fields describes show users output fields.
Output Example: Console Users*A:node-1# show users
===============================================================================
User Type Login time Idle time
Session ID From
===============================================================================
Console -- 3d 10:11:02 --
6 --
admin SSHv2 12OCT2018 20:44:15 0d 00:00:50 A-
83 192.168.0.10
admin SSHv2 12OCT2018 21:09:25 0d 00:00:00 --
#84 192.168.0.10
-------------------------------------------------------------------------------
Number of users: 2
'#' indicates the current active session
'A' indicates user is in admin mode
===============================================================================
Label |
Description |
---|---|
User |
The user name. |
Type |
The user is authorized this access type. |
From |
The originating IP address. |
Login time |
The time the user logged in. |
Idle time |
The amount of idle time for a specific login. |
Number of users |
Displays the total number of users logged in. |
utilization
utilization
Syntax
utilization [detail]
Context
[Tree] (show>chassis>power-management utilization)
Full Context
show chassis power-management utilization
Description
This command displays power management utilization.
Parameters
- detail
-
Displays detailed breakdown of devices.
Platforms
7750 SR-1s, 7750 SR-2s, 7750 SR-2se, 7750 SR-7s, 7750 SR-14s, 7950 XRS
Output
The following output is an example of power management utilization information, and Output Fields: show chassis power-management utilization describes the output fields.
Output Example: show chassis power-management utilization*A:Dut-A# show chassis power-management utilization
===============================================================================
Chassis Power Utilization
===============================================================================
SUPPLY PEAK DEMAND
Power Capacity : 22000.00 Watts Fan : 695.00 Watts ( 3%)
Safety Level : 13203.00 Watts (100%) IO Module : 7163.09 Watts ( 33%)
Alert Level : 0.00 Watts CPM Module : 392.86 Watts ( 2%)
Fabric Module : 1622.25 Watts ( 7%)
MDA Module : 6023.07 Watts ( 27%)+
CCM Module : 50.82 Watts ( 0%)
Peak Util. : 9924.02 Watts ( 45%)
CURRENT DEMAND
Current Util. : 9623.01 Watts ( 44%)
===============================================================================
+ Power utilization of device already included in IO Module value
===============================================================================
Output Example: show chassis power-management utilization
detail
*A:DUT-A# show chassis power-management utilization
===============================================================================
Chassis Power Zone 1 Utilization
===============================================================================
SUPPLY PEAK DEMAND
Power Capacity : 24000.00 Watts Chassis/Fan : 635.16 Watts ( 3%)
IO Module : 355.67 Watts ( 1%)
CPM Module : 546.64 Watts ( 2%)
Fabric Module : 746.00 Watts ( 3%)
MDA Module : 748.69 Watts ( 3%)
XIOM Module : 476.29 Watts ( 2%)
Peak Util. : 3508.45 Watts ( 15%)
Mode : basic Current util. : 3356.82 Watts ( 14%)
Reserved Power : 6000.00 Watts Safety Level : 2892.00 Watts ( 20%)
Util. + Reserve : 9356.82 Watts ( 39%) Safety Alert : +1000.00 Watts
Remaining Power : 14643.18 Watts Alert Level : 3892.00 Watts ( 26%)
===============================================================================
*A:DUT-A# show chassis power-management utilization detail
===============================================================================
Chassis Power Zone 1 Utilization (detail)
===============================================================================
SUPPLY PEAK DEMAND
Power Capacity : 24000.00 Watts Chassis/Fan
Power Module 1/1 : 6000.00 Watts 1/1 : 86.06 Watts ( 0%)
Power Module 1/2 : 6000.00 Watts 1/2 : 77.45 Watts ( 0%)
Power Module 1/3 : 0.00 Watts 1/3 : 76.62 Watts ( 0%)
Power Module 1/4 : 0.00 Watts 1/4 : 86.06 Watts ( 0%)
Power Module 1/5 : 0.00 Watts 1/5 : 76.62 Watts ( 0%)
Power Module 1/6 : 0.00 Watts 1/6 : 77.45 Watts ( 0%)
Power Module 1/7 : 0.00 Watts 1/7 : 77.45 Watts ( 0%)
Power Module 1/8 : 0.00 Watts 1/8 : 77.45 Watts ( 0%)
Power Module 1/9 : 0.00 Watts IO Module
Power Module 1/10: 0.00 Watts Slot 2 : 355.67 Watts ( 1%)
Power Module 2/1 : 6000.00 Watts CPM Module
Power Module 2/2 : 6000.00 Watts Slot A : 276.28 Watts ( 1%)
Power Module 2/3 : 0.00 Watts Slot B : 270.36 Watts ( 1%)
Power Module 2/4 : 0.00 Watts Fabric Module
Power Module 2/5 : 0.00 Watts Sfm 1 : 94.78 Watts ( 0%)
Power Module 2/6 : 0.00 Watts Sfm 2 : 91.44 Watts ( 0%)
Power Module 2/7 : 0.00 Watts Sfm 3 : 92.56 Watts ( 0%)
Power Module 2/8 : 0.00 Watts Sfm 4 : 94.78 Watts ( 0%)
Power Module 2/9 : 0.00 Watts Sfm 5 : 93.67 Watts ( 0%)
Power Module 2/10: 0.00 Watts Sfm 6 : 91.44 Watts ( 0%)
Sfm 7 : 93.67 Watts ( 0%)
Sfm 8 : 93.67 Watts ( 0%)
MDA Module
MDA 2/1 : 582.28 Watts ( 2%)
MDA 2/x2/1 : 72.63 Watts ( 0%)
MDA 2/x2/2 : 93.77 Watts ( 0%)
XIOM Module
XIOM 2/x2 : 476.29 Watts ( 2%)
Peak Util. : 3508.45 Watts ( 15%)
Mode : basic Current util. : 3329.57 Watts ( 14%)
Reserved Power : 6000.00 Watts Safety Level : 2892.00 Watts ( 20%)
Util. + Reserve : 9329.57 Watts ( 39%) Safety Alert : +1000.00 Watts
Remaining Power : 14670.43 Watts Alert Level : 3892.00 Watts ( 26%)
===============================================================================
*A:DUT-A#
Label |
Description |
---|---|
SUPPLY |
|
Power Capacity |
Indicates the total amount of power available to the chassis. |
Safety Level |
Specifies the configured Power Safety Level, which is a percentage of the worst case power consumption level. |
Alert Level |
Specifies the configured power level in watts, which causes the system to raise an alarm if the available power level drops below a set level. |
DEMAND |
|
Fan |
Specifies the amount of power used for the fan tray indicated. |
IO Module |
Specifies the amount of power used for the IO Module indicated. |
CPM Module |
Specifies the amount of power used for the CPM indicated. |
Fabric Module |
Specifies the amount of power used for the SFM indicated. |
MDA Module |
Specifies the amount of power used for the line card indicated. |
Current Util. |
Specifies the total amount of power used for all system elements. |
Peak Util. |
Specifies peak utilization starting from bootup. |