PORT

digitalDiagnosticMonitorCleared

Table 1. digitalDiagnosticMonitorCleared properties

Property name

Value

Application name

PORT

Event ID

2041

Event name

digitalDiagnosticMonitorCleared

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.43

Default severity

minor

Source stream

main

Message format string

Possible messages:

  • SFF DDM ($tmnxDDMFailedObject$) cleared

  • SFF DDM Lane $tmnxDDMLaneIdOrModule$ ( $tmnxDDMFailedObject$) cleared

Cause

Generated when an SFP/XFP that supports Digital Diagnostic Monitoring (DDM) clears a failed state.

Effect

N/A

Recovery

N/A

digitalDiagnosticMonitorFailed

Table 2. digitalDiagnosticMonitorFailed properties

Property name

Value

Application name

PORT

Event ID

2030

Event name

digitalDiagnosticMonitorFailed

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.35

Default severity

minor

Source stream

main

Message format string

Possible messages:

  • SFF DDM ($tmnxDDMFailedObject$) raised

  • SFF DDM Lane $tmnxDDMLaneIdOrModule$ ($tmnxDDMFailedObject$) raised

Cause

Generated when an SFF that supports Digital Diagnostic Monitoring (DDM) enters a failed state.

Effect

N/A

Recovery

N/A

ds1AlarmClear

Table 3. ds1AlarmClear properties

Property name

Value

Application name

PORT

Event ID

2016

Event name

ds1AlarmClear

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.18

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortNotifyDS1AlarmReason$ Cleared

Cause

Generated when a DS1 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS1ReportAlarm.

Effect

N/A

Recovery

N/A

ds1AlarmSet

Table 4. ds1AlarmSet properties

Property name

Value

Application name

PORT

Event ID

2015

Event name

ds1AlarmSet

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.17

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortNotifyDS1AlarmReason$ Set

Cause

Generated when a DS1 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS1ReportAlarm.

Effect

N/A

Recovery

N/A

ds1LoopbackStart

Table 5. ds1LoopbackStart properties

Property name

Value

Application name

PORT

Event ID

2019

Event name

ds1LoopbackStart

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.24

Default severity

minor

Source stream

main

Message format string

DS1/E1 '$tmnxDS1Loopback$' Loopback Started

Cause

The tmnxDS1E1LoopbackStarted notification is generated when a loopback is provisioned on a DS1/E1 port.

Effect

N/A

Recovery

N/A

ds1LoopbackStop

Table 6. ds1LoopbackStop properties

Property name

Value

Application name

PORT

Event ID

2020

Event name

ds1LoopbackStop

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.25

Default severity

minor

Source stream

main

Message format string

DS1/E1 '$tmnxDS1Loopback$' Loopback Stopped

Cause

The tmnxDS1E1LoopbackStopped notification is generated when a loopback is removed on a DS1/E1 port. The value of tmnxSonetLoopback specifies the type of loopback that was configured and has now been removed.

Effect

N/A

Recovery

N/A

ds3AlarmClear

Table 7. ds3AlarmClear properties

Property name

Value

Application name

PORT

Event ID

2014

Event name

ds3AlarmClear

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.16

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortNotifyDS3AlarmReason$ Cleared

Cause

Generated when a DS3 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS3ChannelReportAlarm.

Effect

N/A

Recovery

N/A

ds3AlarmSet

Table 8. ds3AlarmSet properties

Property name

Value

Application name

PORT

Event ID

2013

Event name

ds3AlarmSet

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.15

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortNotifyDS3AlarmReason$ Set

Cause

Generated when a DS3 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS3ChannelReportAlarm.

Effect

N/A

Recovery

N/A

ds3LoopbackStart

Table 9. ds3LoopbackStart properties

Property name

Value

Application name

PORT

Event ID

2021

Event name

ds3LoopbackStart

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.26

Default severity

minor

Source stream

main

Message format string

DS3/E3 '$tmnxDS3ChannelLoopback$' Loopback Started

Cause

The tmnxDS3E3LoopbackStarted notification is generated when a loopback is provisioned on a DS3/E3 port.

Effect

N/A

Recovery

N/A

ds3LoopbackStop

Table 10. ds3LoopbackStop properties

Property name

Value

Application name

PORT

Event ID

2022

Event name

ds3LoopbackStop

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.27

Default severity

minor

Source stream

main

Message format string

DS3/E3 '$tmnxDS3ChannelLoopback$' Loopback Stopped

Cause

The tmnxDS3E3LoopbackStopped notification is generated when a loopback is removed on a DS3/E3 port. The value of tmnxDS3ChannelLoopback specifies the type of loopback that was configured and has now been removed.

Effect

N/A

Recovery

N/A

dsxClockSyncStateChange

Table 11. dsxClockSyncStateChange properties

Property name

Value

Application name

PORT

Event ID

2034

Event name

dsxClockSyncStateChange

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.37

Default severity

minor

Source stream

main

Message format string

Clock Sync State ($tmnxDSXClockSyncStateObject$)

Cause

Generated when the tmnxDS3ChannelClockSyncState changes for a DS3 or DS1 channel with adaptive or differential clock source.

Effect

N/A

Recovery

N/A

etherAlarmClear

Table 12. etherAlarmClear properties

Property name

Value

Application name

PORT

Event ID

2018

Event name

etherAlarmClear

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.23

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortNotifyEtherAlarmReason$ Cleared

Cause

tmnxEqPortEtherAlarmClear is generated when a ethernet port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxPortEtherReportAlarm.

Effect

N/A

Recovery

N/A

etherAlarmSet

Table 13. etherAlarmSet properties

Property name

Value

Application name

PORT

Event ID

2017

Event name

etherAlarmSet

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.22

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortNotifyEtherAlarmReason$ Set

Cause

tmnxEqPortEtherAlarm is generated when a ethernet port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxPortEtherReportAlarm.

Effect

N/A

Recovery

N/A

etherDuplexNotCompatible

Table 14. etherDuplexNotCompatible properties

Property name

Value

Application name

PORT

Event ID

2028

Event name

etherDuplexNotCompatible

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.33

Default severity

major

Source stream

main

Message format string

Provisioned duplex $tmnxPortEtherDuplex$ not compatible with MDA $tmnxMdaNotifyType$

Cause

Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured duplex on an MDA port is not compatible with the inserted MDA.

Effect

N/A

Recovery

N/A

etherIngressRateCfgNotCompatible

Table 15. etherIngressRateCfgNotCompatible properties

Property name

Value

Application name

PORT

Event ID

2029

Event name

etherIngressRateCfgNotCompatible

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.34

Default severity

major

Source stream

main

Message format string

Ingress rate provisioning not supported on MDA type $tmnxMdaNotifyType$

Cause

Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured ingress rate on an MDA port is not compatible with the inserted MDA.

Effect

N/A

Recovery

N/A

etherLoopCleared

Table 16. etherLoopCleared properties

Property name

Value

Application name

PORT

Event ID

2026

Event name

etherLoopCleared

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.31

Default severity

minor

Source stream

main

Message format string

Ethernet loop cleared on $tmnxPortNotifyPortId$

Cause

The tmnxEqPortEtherLoopCleared notification is generated when down-when-looped detects an Ethernet port has stopped receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'. Setting tmnxPortEtherDownWhenLoopedEnabled to 'false' will also cause this notification to be generated if tmnxEqPortEtherLoopDetected had previously been raised.

Effect

N/A

Recovery

N/A

etherLoopDetected

Table 17. etherLoopDetected properties

Property name

Value

Application name

PORT

Event ID

2025

Event name

etherLoopDetected

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.30

Default severity

minor

Source stream

main

Message format string

Ethernet loop detected on port $tmnxPortNotifyPortId$

Cause

The tmnxEqPortEtherLoopDetected notification is generated when down-when-looped detects an Ethernet port is receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'.

Effect

N/A

Recovery

N/A

etherSpeedNotCompatible

Table 18. etherSpeedNotCompatible properties

Property name

Value

Application name

PORT

Event ID

2027

Event name

etherSpeedNotCompatible

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.32

Default severity

major

Source stream

main

Message format string

Provisioned speed $tmnxPortEtherSpeed$ not compatible with MDA $tmnxMdaNotifyType$

Cause

Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured speed on an MDA port is not compatible with the inserted MDA.

Effect

N/A

Recovery

N/A

otuAlarms

Table 19. otuAlarms properties

Property name

Value

Application name

PORT

Event ID

2037

Event name

otuAlarms

SNMP notification prefix and OID

TIMETRA-OTU-MIB.tmnxOtuNotifications.1

Default severity

minor

Source stream

main

Message format string

OTU Alarms Set $tmnxOtuIfAlarmState$

Cause

The tmnxOtuIfAlarmNotification notification indicates that an OTU interface has experienced either a raising or clearing of an alarm in the Forward Error Correction (FEC), Section Monitoring (SM), Path Monitoring (PM) or Payload Monitoring (PSI) fields of the OTU frame.

Effect

N/A

Recovery

N/A

portError

Table 20. portError properties

Property name

Value

Application name

PORT

Event ID

2009

Event name

portError

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.14

Default severity

minor

Source stream

main

Message format string

Physical port $tmnxPortNotifyError$

Cause

Generated when an error listed in tmnxPortNotifyError is detected on the port.

Effect

N/A

Recovery

N/A

sdhLoopbackStart

Table 21. sdhLoopbackStart properties

Property name

Value

Application name

PORT

Event ID

2023

Event name

sdhLoopbackStart

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.28

Default severity

minor

Source stream

main

Message format string

Sonet/SDH '$tmnxSonetLoopback$' Loopback Started

Cause

The tmnxSonetSDHLoopbackStarted notification is generated when a loopback is provisioned on a Sonet-SDH port.

Effect

N/A

Recovery

N/A

sdhLoopbackStop

Table 22. sdhLoopbackStop properties

Property name

Value

Application name

PORT

Event ID

2024

Event name

sdhLoopbackStop

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.29

Default severity

minor

Source stream

main

Message format string

Sonet/SDH '$tmnxSonetLoopback$' Loopback Stopped

Cause

The tmnxSonetSDHLoopbackStopped notification is generated when a loopback test is removed on a Sonet-SDH port. The value of tmnxDS1Loopback specifies the type of loopback that was configured and has now been removed.

Effect

N/A

Recovery

N/A

SFPInserted

Table 23. SFPInserted properties

Property name

Value

Application name

PORT

Event ID

2005

Event name

SFPInserted

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.8

Default severity

minor

Source stream

main

Message format string

SFF Inserted

Cause

Generated when a SFP is inserted in the port.

Effect

N/A

Recovery

N/A

SFPRemoved

Table 24. SFPRemoved properties

Property name

Value

Application name

PORT

Event ID

2006

Event name

SFPRemoved

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.9

Default severity

minor

Source stream

main

Message format string

SFF Removed

Cause

Generated when a SFP is removed from the port.

Effect

N/A

Recovery

N/A

SFPStatusBlocked

Table 25. SFPStatusBlocked properties

Property name

Value

Application name

PORT

Event ID

2060

Event name

SFPStatusBlocked

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.36

Default severity

minor

Source stream

main

Message format string

SFF blocked by culprit

Cause

The tmnxEqPortSFPStatusFailure notification is generated when the tmnxPortSFPStatus of an SFF results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Nokia SR OS series systems.

Effect

The SFF device is not operational and the associated port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and re-insert the SFF device. If the problem persists then replace the SFF device.

SFPStatusCulprit

Table 26. SFPStatusCulprit properties

Property name

Value

Application name

PORT

Event ID

2059

Event name

SFPStatusCulprit

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.36

Default severity

minor

Source stream

main

Message format string

SFF culprit

Cause

The tmnxEqPortSFPStatusFailure notification is generated when the tmnxPortSFPStatus of an SFF results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Nokia SR OS series systems.

Effect

The SFF device is not operational and the associated port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and re-insert the SFF device. If the problem persists then replace the SFF device.

SFPStatusDDMCorrupt

Table 27. SFPStatusDDMCorrupt properties

Property name

Value

Application name

PORT

Event ID

2031

Event name

SFPStatusDDMCorrupt

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.36

Default severity

minor

Source stream

main

Message format string

SFF DDM Checksums do not match

Cause

The tmnxEqPortSFPStatusFailure notification is generated when the tmnxPortSFPStatus of an SFF results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Nokia SR OS series systems.

Effect

The SFF device is not operational and the associated port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and re-insert the SFF device. If the problem persists then replace the SFF device.

SFPStatusFailure

Table 28. SFPStatusFailure properties

Property name

Value

Application name

PORT

Event ID

2008

Event name

SFPStatusFailure

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.36

Default severity

minor

Source stream

main

Message format string

SFF Checksums do not match

Cause

The tmnxEqPortSFPStatusFailure notification is generated when the tmnxPortSFPStatus of an SFF results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Nokia SR OS series systems.

Effect

The SFF device is not operational and the associated port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and re-insert the SFF device. If the problem persists then replace the SFF device.

SFPStatusInvalidFormFactor

Table 29. SFPStatusInvalidFormFactor properties

Property name

Value

Application name

PORT

Event ID

2087

Event name

SFPStatusInvalidFormFactor

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.36

Default severity

minor

Source stream

main

Message format string

SFF In Invalid Form Factor State

Cause

The tmnxEqPortSFPStatusFailure notification is generated when the tmnxPortSFPStatus of an SFF results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Nokia SR OS series systems.

Effect

The SFF device is not operational and the associated port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and re-insert the SFF device. If the problem persists then replace the SFF device.

SFPStatusModuleFault

Table 30. SFPStatusModuleFault properties

Property name

Value

Application name

PORT

Event ID

2088

Event name

SFPStatusModuleFault

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.36

Default severity

minor

Source stream

main

Message format string

SFF In Fault State

Cause

The tmnxEqPortSFPStatusFailure notification is generated when the tmnxPortSFPStatus of an SFF results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Nokia SR OS series systems.

Effect

The SFF device is not operational and the associated port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and re-insert the SFF device. If the problem persists then replace the SFF device.

SFPStatusOperational

Table 31. SFPStatusOperational properties

Property name

Value

Application name

PORT

Event ID

2061

Event name

SFPStatusOperational

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.36

Default severity

minor

Source stream

main

Message format string

SFF operational

Cause

The event is generated when the SFF does not undergo a removal or insertion but it recovers from an error state. This can happen when an SFF device with tmnxPortSFPStatus 'culprit (6)' is removed, and the state of the other affected SFF devices with tmnxPortSFPStatus 'blocked (7)' clear back to tmnxPortSFPStatus 'operational (1)'.

Effect

The SFF device is operational.

Recovery

N/A

SFPStatusReadError

Table 32. SFPStatusReadError properties

Property name

Value

Application name

PORT

Event ID

2032

Event name

SFPStatusReadError

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.36

Default severity

minor

Source stream

main

Message format string

SFF Read failure

Cause

The tmnxEqPortSFPStatusFailure notification is generated when the tmnxPortSFPStatus of an SFF results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Nokia SR OS series systems.

Effect

The SFF device is not operational and the associated port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and re-insert the SFF device. If the problem persists then replace the SFF device.

SFPStatusUnsupported

Table 33. SFPStatusUnsupported properties

Property name

Value

Application name

PORT

Event ID

2033

Event name

SFPStatusUnsupported

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.36

Default severity

minor

Source stream

main

Message format string

SFF unsupported type

Cause

The tmnxEqPortSFPStatusFailure notification is generated when the tmnxPortSFPStatus of an SFF results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Nokia SR OS series systems.

Effect

The SFF device is not operational and the associated port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and re-insert the SFF device. If the problem persists then replace the SFF device.

sonetSDHAlarmClear

Table 34. sonetSDHAlarmClear properties

Property name

Value

Application name

PORT

Event ID

2002

Event name

sonetSDHAlarmClear

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.5

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortNotifySonetAlarmReason$ Cleared

Cause

Generated when a SONET/SDH port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetReportAlarm.

Effect

N/A

Recovery

N/A

sonetSDHAlarmSet

Table 35. sonetSDHAlarmSet properties

Property name

Value

Application name

PORT

Event ID

2001

Event name

sonetSDHAlarmSet

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.4

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortNotifySonetAlarmReason$ Set

Cause

Generated when a SONET/SDH port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetReportAlarm.

Effect

N/A

Recovery

N/A

sonetSDHChannelAlarmClear

Table 36. sonetSDHChannelAlarmClear properties

Property name

Value

Application name

PORT

Event ID

2004

Event name

sonetSDHChannelAlarmClear

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.7

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortNotifySonetPathAlarmReason$ Cleared

Cause

Generated when a SONET/SDH path alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetPathReportAlarm.

Effect

N/A

Recovery

N/A

sonetSDHChannelAlarmSet

Table 37. sonetSDHChannelAlarmSet properties

Property name

Value

Application name

PORT

Event ID

2003

Event name

sonetSDHChannelAlarmSet

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.6

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortNotifySonetPathAlarmReason$ Set

Cause

Generated when a SONET/SDH path alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetPathReportAlarm.

Effect

N/A

Recovery

N/A

tmnxCellPortCbsdAuthorized

Table 38. tmnxCellPortCbsdAuthorized properties

Property name

Value

Application name

PORT

Event ID

2080

Event name

tmnxCellPortCbsdAuthorized

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.9

Default severity

minor

Source stream

main

Message format string

CBSD $tmnxPortPortID$ Authorized - CBSD Id: $tmnxCellPortCbsdAuthId$, Grant Id: $tmnxCellPortCbsdAuthGrantId$, Grant expire time: $tmnxCellPortCbsdAuthGrantExpTime$, Heartbeat interval: $tmnxCellPortCbsdAuthHeartbeatInt$ seconds

Cause

The tmnxCellPortCbsdAuthorized notification is generated when the CBSD is authorized by the SAS.

Effect

The CBSD enables SR-OS on the cellular interface.

Recovery

Not applicable.

tmnxCellPortCbsdGranted

Table 39. tmnxCellPortCbsdGranted properties

Property name

Value

Application name

PORT

Event ID

2079

Event name

tmnxCellPortCbsdGranted

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.8

Default severity

minor

Source stream

main

Message format string

CBSD $tmnxPortPortID$ Granted - CBSD Id: $tmnxCellPortCbsdAuthId$, Grant Id: $tmnxCellPortCbsdAuthGrantId$, Grant expire time: $tmnxCellPortCbsdAuthGrantExpTime$, Heartbeat interval: $tmnxCellPortCbsdAuthHeartbeatInt$ seconds

Cause

The tmnxCellPortCbsdGranted notification is generated when the CBSD has received a grant Id from the SAS. The CBSD is not authorized until after the authorized notification is generated.

Effect

The CBSD is awaiting authorization from the SAS.

Recovery

Not applicable.

tmnxCellPortCbsdRegistered

Table 40. tmnxCellPortCbsdRegistered properties

Property name

Value

Application name

PORT

Event ID

2077

Event name

tmnxCellPortCbsdRegistered

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.6

Default severity

minor

Source stream

main

Message format string

CBSD $tmnxPortPortID$ Registered - CBSD Id: $tmnxCellPortCbsdAuthId$, Server: $tmnxCellPortCbsdAuthCurSasSvrIp$

Cause

The tmnxCellPortCbsdRegistered notification is generated when the CBSD successfully registers with the SAS.

Effect

After this notification is generated the CBSD continues the CBSD authorization procedures.

Recovery

Not applicable.

tmnxCellPortCbsdTransDown

Table 41. tmnxCellPortCbsdTransDown properties

Property name

Value

Application name

PORT

Event ID

2081

Event name

tmnxCellPortCbsdTransDown

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.10

Default severity

minor

Source stream

main

Message format string

CBSD $tmnxPortPortID$ transitioned from $tmnxCellCbsdAuthPrevTransState$ to $tmnxCellCbsdAuthNewTransState$ - CBSD Id: $tmnxCellPortCbsdAuthId$, Grant Id: $tmnxCellPortCbsdAuthGrantId$, Reason: $tmnxCellCbsdAuthFailReason$, Response code: $tmnxCellCbsdAuthRespCode$

Cause

The tmnxCellPortCbsdTransDown notification is generated when the CBSD is transitioning to a lower state.

Effect

The CBSD proceeds to complete authorization with the SAS from the state the CBSD has transitioned to.

Recovery

Not applicable.

tmnxCellPortCbsdUnregistered

Table 42. tmnxCellPortCbsdUnregistered properties

Property name

Value

Application name

PORT

Event ID

2078

Event name

tmnxCellPortCbsdUnregistered

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.7

Default severity

minor

Source stream

main

Message format string

CBSD $tmnxPortPortID$ Unregistered - CBSD Id: $tmnxCellPortCbsdAuthId$, Reason: $tmnxCellCbsdAuthFailReason$, Response code: $tmnxCellCbsdAuthRespCode$

Cause

The tmnxCellPortCbsdUnregistered notification is generated when the CBSD is declared unregistered with the SAS.

Effect

The CBSD restarts the registration procedures with the SAS.

Recovery

Not applicable.

tmnxCellularActiveSimChange

Table 43. tmnxCellularActiveSimChange properties

Property name

Value

Application name

PORT

Event ID

2070

Event name

tmnxCellularActiveSimChange

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.5

Default severity

major

Source stream

main

Message format string

Active SIM card switched to SIM $tmnxCellMdaOperActiveSim$ ( $tmnxCellMdaSimLastSwitchReason$)

Cause

The tmnxCellularActiveSimChange notification is generated when the active SIM card on the cellular MDA changes.

Effect

N/A

Recovery

N/A

tmnxCellularBearerCreated

Table 44. tmnxCellularBearerCreated properties

Property name

Value

Application name

PORT

Event ID

2065

Event name

tmnxCellularBearerCreated

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.1

Default severity

warning

Source stream

main

Message format string

Dedicated bearer id $tmnxCellPortBearerId$ created on port $tmnxPortPortID$

Cause

The tmnxCellularBearerCreated notification is generated when the network creates a dedicated bearer on a cellular port.

Effect

N/A

Recovery

N/A

tmnxCellularBearerDeleted

Table 45. tmnxCellularBearerDeleted properties

Property name

Value

Application name

PORT

Event ID

2066

Event name

tmnxCellularBearerDeleted

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.2

Default severity

warning

Source stream

main

Message format string

Dedicated bearer id $tmnxCellPortBearerId$ deleted on port $tmnxPortPortID$

Cause

The tmnxCellularBearerDeleted notification is generated when the network removes a dedicated bearer on a cellular port.

Effect

N/A

Recovery

N/A

tmnxCellularBearerModified

Table 46. tmnxCellularBearerModified properties

Property name

Value

Application name

PORT

Event ID

2067

Event name

tmnxCellularBearerModified

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.3

Default severity

warning

Source stream

main

Message format string

Bearer id $tmnxCellPortBearerId$ modified on port $tmnxPortPortID$

Cause

The tmnxCellularBearerModified notification is generated when the network modifies a bearer on a cellular port.

Effect

N/A

Recovery

N/A

tmnxCellularNoServiceReset

Table 47. tmnxCellularNoServiceReset properties

Property name

Value

Application name

PORT

Event ID

2069

Event name

tmnxCellularNoServiceReset

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.4

Default severity

critical

Source stream

main

Message format string

Could not establish service over the cellular port ($tmnxCellMdaNoServiceResetReason$). Resetting the system in 60 seconds if this condition persists

Cause

The tmnxCellularNoServiceReset notification is generated before the system resets because it could not establish service over the cellular interface.

Effect

The system will reset 60 seconds after this event is generated if it cannot establish service over the cellular interface.

Recovery

The reset of the system may cause the cellular port to become operational.

tmnxCellularRssiAlarm

Table 48. tmnxCellularRssiAlarm properties

Property name

Value

Application name

PORT

Event ID

2085

Event name

tmnxCellularRssiAlarm

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.11

Default severity

minor

Source stream

main

Message format string

The RSSI level detected by cellular port $tmnxPortNotifyPortId$ has been below the threshold $tmnxCellSimCardRssiThresh$ dBm for the duration of $tmnxCellSimCardRssiAlarmTime$ seconds

Cause

The tmnxCellularRssiAlarm notification is generated when the cellular port has detected the RSSI (Received Signal Strength Indicator) level fell below the configured minimum threshold tmnxCellSimCardRssiThresh for a duration of time configured by tmnxCellSimCardRssiAlarmTime.

Effect

N/A.

Recovery

N/A.

tmnxCellularRssiAlarmClear

Table 49. tmnxCellularRssiAlarmClear properties

Property name

Value

Application name

PORT

Event ID

2086

Event name

tmnxCellularRssiAlarmClear

SNMP notification prefix and OID

TIMETRA-CELLULAR-MIB.tmnxCellularNotifications.12

Default severity

cleared

Source stream

main

Message format string

Alarm tmnxCellularRssiAlarm is cleared - The RSSI level detected by cellular port $tmnxPortNotifyPortId$ has been equal to or above the threshold $tmnxCellSimCardRssiThresh$ dBm for the duration of $tmnxCellSimCardRssiAlarmTime$ seconds

Cause

After the tmnxCellularRssiAlarm is generated, the tmnxCellularRssiAlarmClear notification is generated when the cellular port has detected the RSSI (Received Signal Strength Indicator) level rose to equal or above the configured minimum threshold tmnxCellSimCardRssiThresh for the duration of time configured by tmnxCellSimCardRssiAlarmTime.

Effect

N/A.

Recovery

N/A.

tmnxDS0ChanGrpLoopbackStarted

Table 50. tmnxDS0ChanGrpLoopbackStarted properties

Property name

Value

Application name

PORT

Event ID

2089

Event name

tmnxDS0ChanGrpLoopbackStarted

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.70

Default severity

major

Source stream

main

Message format string

Started DS0ChanGrp '$tmnxDS0ChanGroupLoopback$' loopback on port $tmnxPortNotifyPortId$

Cause

The tmnxDS0ChanGrpLoopbackStarted notification is generated when a loopback is provisioned on a DS0 channel group. The value of tmnxDS0ChanGroupLoopback specifies the type of loopback that was configured.

Effect

Setting the DS0 channel group in loopback mode impacts the normal flow of traffic across the port.

Recovery

Remove loopback on the DS0 channel group to restore normal traffic flow.

tmnxDS0ChanGrpLoopbackStopped

Table 51. tmnxDS0ChanGrpLoopbackStopped properties

Property name

Value

Application name

PORT

Event ID

2090

Event name

tmnxDS0ChanGrpLoopbackStopped

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.71

Default severity

major

Source stream

main

Message format string

Stopped DS0ChanGrp '$tmnxDS0ChanGroupLoopback$' loopback on port $tmnxPortNotifyPortId$

Cause

The tmnxDS0ChanGrpLoopbackStopped notification is generated when a loopback is removed on a DS0 channel group. The value of tmnxDS0ChanGroupLoopback specifies the type of loopback that was configured and has now been removed.

Effect

The loopback has been removed and normal traffic flow may resume.

Recovery

No recovery is required.

tmnxEqCohOptPortAlarm

Table 52. tmnxEqCohOptPortAlarm properties

Property name

Value

Application name

PORT

Event ID

2056

Event name

tmnxEqCohOptPortAlarm

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.56

Default severity

minor

Source stream

main

Message format string

Coherent Optical Alarms Active: $tmnxCohOptPortAlarmState$

Cause

The tmnxEqCohOptPortAlarm notification indicates that a coherent optical port has experienced either a raising or a clearing of an alarm as indicated by the value of tmnxCohOptPortAlarmState. Further details can be obtained from the value of tmnxCohOptPortDefectPoints. Note: The value of tmnxCohOptPortDefectPoints included in the notification may not reflect the latest data. A separate query of that object is required to view the latest data.

Effect

N/A

Recovery

N/A

tmnxEqPortEtherCrcAlarm

Table 53. tmnxEqPortEtherCrcAlarm properties

Property name

Value

Application name

PORT

Event ID

2052

Event name

tmnxEqPortEtherCrcAlarm

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.52

Default severity

minor

Source stream

main

Message format string

CRC errors in excess of the configured $tmnxPortNotifyEtherCrcAlarmValue$ threshold $tmnxPortNotifyEtherCrcMultiplier$*10e-$tmnxPortNotifyEtherCrcThreshold$ Set

Cause

tmnxEqPortEtherCrcAlarm is generated when an Ethernet port CRC alarm condition is detected. It is generated only when the type of alarm being raised is enabled on the port.

Effect

On a signal failure (SF) fault, the port is taken out of service until the CRC alarm condition is cleared.

Recovery

tmnxEqPortEtherCrcAlarm is cleared by taking the port out of service (eg. shutdown, card/mda reset, physical link loss), or changing/disabling the associated threshold/multiplier values. Signal Degradation is self- clearing and will clear once the error rate drops below 1/10th of the configured rate.

tmnxEqPortEtherCrcAlarmClear

Table 54. tmnxEqPortEtherCrcAlarmClear properties

Property name

Value

Application name

PORT

Event ID

2053

Event name

tmnxEqPortEtherCrcAlarmClear

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.53

Default severity

minor

Source stream

main

Message format string

CRC errors in excess of the configured $tmnxPortNotifyEtherCrcAlarmValue$ threshold $tmnxPortNotifyEtherCrcMultiplier$*10e-$tmnxPortNotifyEtherCrcThreshold$ Cleared

Cause

tmnxEqPortEtherCrcAlarmClear is generated when an Ethernet port CRC alarm condition is cleared or disabled.

Effect

N/A

Recovery

N/A

tmnxEqPortEtherEgressRateChange

Table 55. tmnxEqPortEtherEgressRateChange properties

Property name

Value

Application name

PORT

Event ID

2068

Event name

tmnxEqPortEtherEgressRateChange

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.62

Default severity

minor

Source stream

main

Message format string

Port $tmnxNotifyPortId$ oper egress rate has changed to $tmnxPortEtherOperEgressRate$ kbps

Cause

The tmnxEqPortEtherEgressRateChange notification is generated when the port's operational egress rate changes, due to the reception of ETH-BN (Ethernet Bandwidth Notification) messages, or from a configuration change.

Effect

N/A

Recovery

N/A

tmnxEqPortEtherInternalAlarm

Table 56. tmnxEqPortEtherInternalAlarm properties

Property name

Value

Application name

PORT

Event ID

2054

Event name

tmnxEqPortEtherInternalAlarm

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.54

Default severity

minor

Source stream

main

Message format string

Excess internal MAC TX errors detected Set

Cause

tmnxEqPortEtherInternalAlarm is generated when an Ethernet port experiences excessive internal MAC tx errors. It is generated only when tmnxPortEtherDownOnInternalError is enabled on the port.

Effect

A port experiencing excessive internal MAC tx errors will take the port out of service while the alarm condition is in effect.

Recovery

tmnxEqPortEtherInternalAlarm is cleared by taking the port out of service (eg. shutdown, card/mda reset, physical link loss), or setting tmnxPortEtherDownOnInternalError to the value 'false'.

tmnxEqPortEtherInternalAlarmClr

Table 57. tmnxEqPortEtherInternalAlarmClr properties

Property name

Value

Application name

PORT

Event ID

2055

Event name

tmnxEqPortEtherInternalAlarmClr

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.55

Default severity

minor

Source stream

main

Message format string

Excess internal MAC TX errors detected Cleared

Cause

tmnxEqPortEtherInternalAlarmClr is generated when an Ethernet port no longer experiences excessive internal MAC tx errors.

Effect

N/A

Recovery

N/A

tmnxEqPortEtherSymMonAlarm

Table 58. tmnxEqPortEtherSymMonAlarm properties

Property name

Value

Application name

PORT

Event ID

2057

Event name

tmnxEqPortEtherSymMonAlarm

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.57

Default severity

minor

Source stream

main

Message format string

Symbol errors in excess of the configured $tmnxPortNotifyEtherSymAlarmValue$ threshold $tmnxPortNotifyEtherSymMultiplier$*10e-$tmnxPortNotifyEtherSymThreshold$ Set

Cause

tmnxEqPortEtherSymMonAlarm is generated when an Ethernet port Symbol alarm condition is detected. It is generated only when the type of alarm being raised is enabled on the port.

Effect

On a signal failure (SF) fault, the port is taken out of service until the Symbol alarm condition is cleared.

Recovery

tmnxEqPortEtherSymMonAlarm is cleared by taking the port out of service (eg. shutdown, card/mda reset, physical link loss), or changing/disabling the associated threshold/multiplier values. Signal Degradation is self- clearing and will clear once the error rate drops below 1/10th of the configured rate.

tmnxEqPortEtherSymMonAlarmClear

Table 59. tmnxEqPortEtherSymMonAlarmClear properties

Property name

Value

Application name

PORT

Event ID

2058

Event name

tmnxEqPortEtherSymMonAlarmClear

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.58

Default severity

minor

Source stream

main

Message format string

Symbol errors in excess of the configured $tmnxPortNotifyEtherSymAlarmValue$ threshold $tmnxPortNotifyEtherSymMultiplier$*10e-$tmnxPortNotifyEtherSymThreshold$ Cleared

Cause

tmnxEqPortEtherSymMonAlarmClear is generated when an Ethernet port Symbol alarm condition is cleared or disabled.

Effect

N/A

Recovery

N/A

tmnxEqPortFlexEGroupAlrm

Table 60. tmnxEqPortFlexEGroupAlrm properties

Property name

Value

Application name

PORT

Event ID

2097

Event name

tmnxEqPortFlexEGroupAlrm

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.78

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortFlexEGrpAlmReason$ set

Cause

This log event is generated when a FlexE group level port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxMdaFlexGroupReportAlarm

Effect

N/A

Recovery

N/A

tmnxEqPortFlexEGroupAlrmClr

Table 61. tmnxEqPortFlexEGroupAlrmClr properties

Property name

Value

Application name

PORT

Event ID

2098

Event name

tmnxEqPortFlexEGroupAlrmClr

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.79

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortFlexEGrpAlmReason$ clear

Cause

This log event is generated when a FlexE group level port alarm condition is cleared. It is generated only when the type of alarm being raised is enabled in tmnxMdaFlexGroupReportAlarm

Effect

N/A

Recovery

N/A

tmnxEqPortFlexEMbrPhyInstAlrm

Table 62. tmnxEqPortFlexEMbrPhyInstAlrm properties

Property name

Value

Application name

PORT

Event ID

2101

Event name

tmnxEqPortFlexEMbrPhyInstAlrm

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.82

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortFlexEMbrPhyInstAlmReason$ set

Cause

This log event is generated when a FlexE port alarm condition is detected on a FlexE 100G PHY Instance. It is generated only when the type of alarm being raised is enabled in tmnxMdaFlexMemberPhyReportAlarm

Effect

N/A

Recovery

N/A

tmnxEqPortFlexEMbrPhyInstAlrmClr

Table 63. tmnxEqPortFlexEMbrPhyInstAlrmClr properties

Property name

Value

Application name

PORT

Event ID

2102

Event name

tmnxEqPortFlexEMbrPhyInstAlrmClr

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.83

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortFlexEMbrPhyInstAlmReason$ clear

Cause

This log event is generated when a FlexE port alarm condition is cleared on a FlexE 100G PHY Instance. It is generated only when the type of alarm being raised is enabled in tmnxMdaFlexMemberPhyReportAlarm

Effect

N/A

Recovery

N/A

tmnxEqPortFlexEMemberAlrm

Table 64. tmnxEqPortFlexEMemberAlrm properties

Property name

Value

Application name

PORT

Event ID

2099

Event name

tmnxEqPortFlexEMemberAlrm

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.80

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortFlexEMbrAlmReason$ set

Cause

This log event is generated when a FlexE port alarm condition is detected on a FlexE member. It is generated only when the type of alarm being raised is enabled in tmnxMdaFlexMemberReportAlarm

Effect

N/A

Recovery

N/A

tmnxEqPortFlexEMemberAlrmClr

Table 65. tmnxEqPortFlexEMemberAlrmClr properties

Property name

Value

Application name

PORT

Event ID

2100

Event name

tmnxEqPortFlexEMemberAlrmClr

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.81

Default severity

minor

Source stream

main

Message format string

Alarm $tmnxPortFlexEMbrAlmReason$ clear

Cause

This log event is generated when a FlexE port alarm condition is cleared on a FlexE member. It is generated only when the type of alarm being raised is enabled in tmnxMdaFlexMemberReportAlarm

Effect

N/A

Recovery

N/A

tmnxEqSonetClockSrcNotCompatible

Table 66. tmnxEqSonetClockSrcNotCompatible properties

Property name

Value

Application name

PORT

Event ID

2046

Event name

tmnxEqSonetClockSrcNotCompatible

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.46

Default severity

major

Source stream

main

Message format string

Configured SONET/SDH clock source $tmnxSonetClockSource$ not compatible with MDA type $tmnxMdaNotifyType$

Cause

Notification tmnxEqSonetClockSrcNotCompatible is generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured SONET/SDH clock source on an MDA port is not compatible with the inserted MDA.

Effect

Though services can still be created, the MDA will fail to operate as configured and will be in a failed state.

Recovery

Change the configuration to reflect the capabilities of the MDA port, or switch out the MDA for one that is compatible.

tmnxEqSonetFramingNotCompatible

Table 67. tmnxEqSonetFramingNotCompatible properties

Property name

Value

Application name

PORT

Event ID

2048

Event name

tmnxEqSonetFramingNotCompatible

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.48

Default severity

major

Source stream

main

Message format string

Configured SONET/SDH framing $tmnxSonetFraming$ not compatible with MDA type $tmnxMdaNotifyType$

Cause

Notification tmnxEqSonetFramingNotCompatible is generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured SONET/SDH framing on an MDA port is not compatible with the inserted MDA.

Effect

Though services can still be created, the MDA will fail to operate as configured and will be in a failed state.

Recovery

Change the configuration to reflect the capabilities of the MDA port, or switch out the MDA for one that is compatible.

tmnxEqSonetSfThreshNotCompatible

Table 68. tmnxEqSonetSfThreshNotCompatible properties

Property name

Value

Application name

PORT

Event ID

2047

Event name

tmnxEqSonetSfThreshNotCompatible

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.47

Default severity

major

Source stream

main

Message format string

Configured SONET/SDH SF threshold 10e-$tmnxSonetBerSfThreshold$ not compatible with MDA type $tmnxMdaNotifyType$

Cause

Notification tmnxEqSonetSfThreshNotCompatible is generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured SONET/SDH Signal Fail (SF) threshold on an MDA port is not compatible with the inserted MDA.

Effect

Though services can still be created, the MDA will fail to operate as configured and will be in a failed state.

Recovery

Change the configuration to reflect the capabilities of the MDA port, or switch out the MDA for one that is compatible.

tmnxHwAggShpSchedOperColorAmber

Table 69. tmnxHwAggShpSchedOperColorAmber properties

Property name

Value

Application name

PORT

Event ID

2083

Event name

tmnxHwAggShpSchedOperColorAmber

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.68

Default severity

minor

Source stream

main

Message format string

Hw-agg-shaper-scheduler Amber Alarm

Cause

The notification tmnxHwAggShpSchedOperColorAmber is generated when the number of hw-agg-shapers for an object (Vport) hw-agg-shaper-scheduler policy has crossed 90% of scaling threshold.

Effect

Hw Agg shaper scheduler algorithm will stop running.

Recovery

Monitor the hw-agg-shappers closely within the hw-agg-shapper-scheduler policy.

tmnxHwAggShpSchedOperColorGreen

Table 70. tmnxHwAggShpSchedOperColorGreen properties

Property name

Value

Application name

PORT

Event ID

2082

Event name

tmnxHwAggShpSchedOperColorGreen

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.67

Default severity

minor

Source stream

main

Message format string

Hw-agg-shaper-scheduler Green Alarm

Cause

The notification tmnxHwAggShpSchedOperColorGreen is generated when the number of hw-agg-shapers for an object (Vport) hw-agg-shaper-scheduler policy is well within thresholds.

Effect

Hw Agg shaper scheduler algorithm is running within the normal parameters.

Recovery

None required.

tmnxHwAggShpSchedOperColorRed

Table 71. tmnxHwAggShpSchedOperColorRed properties

Property name

Value

Application name

PORT

Event ID

2084

Event name

tmnxHwAggShpSchedOperColorRed

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.69

Default severity

minor

Source stream

main

Message format string

Hw-agg-shaper-scheduler Red Alarm

Cause

The notification tmnxHwAggShpSchedOperColorRed is generated when the number of hw-agg-shapers for an object (Vport) hw-agg-shaper-scheduler policy has crossed 100% of scaling threshold.

Effect

Hw Agg shaper scheduler algorithm has stopped running.

Recovery

Reduce the hw-agg-shapers attached to the hw-agg-shapper-scheduler policy.

tmnxPortAUIReset

Table 72. tmnxPortAUIReset properties

Property name

Value

Application name

PORT

Event ID

2076

Event name

tmnxPortAUIReset

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.66

Default severity

warning

Source stream

main

Message format string

Reset of the attachment unit interface - likely cause $tmnxPortNotifyAUIResetSource$

Cause

This log event is used only for connectorized ports where a CAUI reset is not expected. This may indicate an issue with the optical line feeding into the SFF that is passed through to the system.

Effect

A reset of the AUI will impact all connector-ports on the connector. Generally, AUI resets are recovered immediately but there can be impact to the traffic flow.

Recovery

As this is reporting an unexpected condition related to the external optical line, the line and the SFF should be investigated.

tmnxPortEtherLoopbackStarted

Table 73. tmnxPortEtherLoopbackStarted properties

Property name

Value

Application name

PORT

Event ID

2071

Event name

tmnxPortEtherLoopbackStarted

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.63

Default severity

major

Source stream

main

Message format string

Started '$tmnxPortEtherLoopback$' loopback on Ethernet port $tmnxPortPortID$

Cause

The tmnxPortEtherLoopbackStarted notification is generated when tmnxPortEtherLoopback is modified to set the Ethernet port to a loopback mode.

Effect

Setting the port in loopback mode impacts the normal flow of traffic across the port.

Recovery

Remove loopback on the port to restore normal traffic flow.

tmnxPortEtherLoopbackStopped

Table 74. tmnxPortEtherLoopbackStopped properties

Property name

Value

Application name

PORT

Event ID

2072

Event name

tmnxPortEtherLoopbackStopped

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.64

Default severity

major

Source stream

main

Message format string

Stopped '$tmnxPortEtherLoopback$' loopback on Ethernet port $tmnxPortPortID$

Cause

The tmnxPortEtherLoopbackStopped notification is generated when a loopback is removed on an Ethernet port. The value of tmnxPortEtherLoopback specifies the type of loopback that was configured and has now been removed.

Effect

The loopback has been removed and normal traffic flow may resume.

Recovery

No recovery is required.

tmnxPortGnssStatusChange

Table 75. tmnxPortGnssStatusChange properties

Property name

Value

Application name

PORT

Event ID

2073

Event name

tmnxPortGnssStatusChange

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.65

Default severity

major

Source stream

main

Message format string

GNSS port $tmnxPortPortID$ status changed; sync $tmnxPortGnssSyncStatus$, antenna: $tmnxPortGnssAntennaStatus$, receiver: $tmnxPortGnssReceiverStatus$

Cause

This notification may be triggered for a variety of reasons including (but not limited to): 1) The antenna is experiencing fault issues 2) The number of visible satellites is too low

Effect

The GNSS receiver is not able to provide a sync-worthy clock signal.

Recovery

If the customer is expecting the GNSS receiver to be locked, the customer will need to determine the root cause (for example, insufficient visible satellites) and resolve the issue (for example, ensure tmnxPortGnssElevationMaskAngle is set accordingly)

tmnxPortUnsupportedFunction

Table 76. tmnxPortUnsupportedFunction properties

Property name

Value

Application name

PORT

Event ID

2036

Event name

tmnxPortUnsupportedFunction

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.38

Default severity

warning

Source stream

main

Message format string

A functionality is required from port $tmnxPortNotifyPortId$ that it cannot support - $tmnxPortNotifyDescription$

Cause

Generated when a functionality is required from this port that it cannot support. The object tmnxPortNotifyDescription explains what function is affected.

Effect

N/A

Recovery

N/A

tmnxResvCbsPoolThreshAmber

Table 77. tmnxResvCbsPoolThreshAmber properties

Property name

Value

Application name

PORT

Event ID

2050

Event name

tmnxResvCbsPoolThreshAmber

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.50

Default severity

minor

Source stream

main

Message format string

Amber Alarm: CBS over Amber threshold: ObjType=$tmnxObjType$ Owner= $tmnxObjPortId$ Type=$tmnxObjAppType$ Pool=$tmnxObjAppPool$ ResvSize=$tmnxObjAppResvSize$ SumOfQ ResvSize= $tmnxObjAppSumOfQResvSize$ Old ResvCBS=$tmnxObjAppResvCbsOld$ New ResvCBS=$tmnxObjAppResvCbsNew$ Old ResvSize= $tmnxObjAppResvSizeOld$

Cause

The notification tmnxResvCbsPoolThreshAmber is generated when a reserved-CBS of an object (MDA or port) has crossed threshold value specified by tmnxObjectAppAmbrAlrmThresh.

Effect

This is warning event but the traffic is not yet affected.

Recovery

The value of tmnxObjectAppResvCbs may need to be adjusted.

tmnxResvCbsPoolThreshGreen

Table 78. tmnxResvCbsPoolThreshGreen properties

Property name

Value

Application name

PORT

Event ID

2049

Event name

tmnxResvCbsPoolThreshGreen

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.49

Default severity

minor

Source stream

main

Message format string

Green Alarm: CBS within threshold: ObjType=$tmnxObjType$ Owner= $tmnxObjPortId$ Type=$tmnxObjAppType$ Pool=$tmnxObjAppPool$ ResvSize=$tmnxObjAppResvSize$ SumOfQ ResvSize= $tmnxObjAppSumOfQResvSize$ Old ResvCBS=$tmnxObjAppResvCbsOld$ New ResvCBS=$tmnxObjAppResvCbsNew$ Old ResvSize= $tmnxObjAppResvSizeOld$

Cause

Notification tmnxResvCbsPoolThreshGreen is generated when a reserved- CBS of an object (MDA or port) returns to within defined thresholds.

Effect

Reserved CBS of the object has returned to within normal parameters.

Recovery

None required.

tmnxResvCbsPoolThreshRed

Table 79. tmnxResvCbsPoolThreshRed properties

Property name

Value

Application name

PORT

Event ID

2051

Event name

tmnxResvCbsPoolThreshRed

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.51

Default severity

major

Source stream

main

Message format string

Red Alarm: CBS over Red threshold: ObjType=$tmnxObjType$ Owner= $tmnxObjPortId$ Type=$tmnxObjAppType$ Pool=$tmnxObjAppPool$ ResvSize=$tmnxObjAppResvSize$ SumOfQ ResvSize= $tmnxObjAppSumOfQResvSize$ Old ResvCBS=$tmnxObjAppResvCbsOld$ New ResvCBS=$tmnxObjAppResvCbsNew$ Old ResvSize= $tmnxObjAppResvSizeOld$

Cause

The notification tmnxResvCbsPoolThreshRed is generated when a reserved-CBS of an object (MDA or port) has crossed the threshold value specified by tmnxObjectAppRedAlrmThresh.

Effect

This is a critical event and the traffic may be affected.

Recovery

The value of tmnxObjectAppResvCbs may need to be adjusted.

tmnxResvPoolUseThreshExcd

Table 80. tmnxResvPoolUseThreshExcd properties

Property name

Value

Application name

PORT

Event ID

2091

Event name

tmnxResvPoolUseThreshExcd

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.72

Default severity

minor

Source stream

main

Message format string

Reserved Pool Usage Threshold Exceeded Alarm

Cause

The notification tmnxResvPoolUseThreshExcd is generated when the reserved pool usage has gone above the threshold in the sampling interval. If reserved pool started this new interval below the threshold and if it has gone above threshold at any point during the interval then this trap is generated.

Effect

Reserved pool threshold usage went above the threshold percentage in this sampling interval.

Recovery

User can either increase the threshold percentage or can increase the size of the reserved pool to subside the alarm.

tmnxResvPoolUseThreshNotExcd

Table 81. tmnxResvPoolUseThreshNotExcd properties

Property name

Value

Application name

PORT

Event ID

2092

Event name

tmnxResvPoolUseThreshNotExcd

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.73

Default severity

minor

Source stream

main

Message format string

Reserved Pool Usage Threshold Not Exceeded Alarm

Cause

The notification tmnxResvPoolUseThreshNotExcd is generated when the reserved pool usage has gone below the threshold in the sampling interval. If reserved pool started this new interval above the threshold and bounced back to the normal threshold at any point during the interval then this trap is generated.

Effect

Reserved pool threshold usage went below the threshold percentage in this sampling interval.

Recovery

None required.

tmnxRS232ControlLeadSignalChg

Table 82. tmnxRS232ControlLeadSignalChg properties

Property name

Value

Application name

PORT

Event ID

2062

Event name

tmnxRS232ControlLeadSignalChg

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.59

Default severity

minor

Source stream

main

Message format string

Serial port $tmnxPortNotifyPortId$ control leads signal change: $tmnxPortNotifyLeadsSignalChg$

Cause

This notification may be triggered for a variety of reasons. One example is that the far-end equipment has been disconnected.

Effect

Alert user of transitions.

Recovery

Determine root cause and resolve accordingly.

tmnxRS232SquelchResetIssued

Table 83. tmnxRS232SquelchResetIssued properties

Property name

Value

Application name

PORT

Event ID

2064

Event name

tmnxRS232SquelchResetIssued

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.61

Default severity

minor

Source stream

main

Message format string

Serial port $tmnxPortNotifyPortId$ squelch reset issued, existing squelch status: $tmnxRS232SocketSquelchStatus$

Cause

N/A

Effect

N/A

Recovery

N/A

tmnxRS232SquelchStatusChange

Table 84. tmnxRS232SquelchStatusChange properties

Property name

Value

Application name

PORT

Event ID

2063

Event name

tmnxRS232SquelchStatusChange

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.60

Default severity

minor

Source stream

main

Message format string

Serial port $tmnxPortNotifyPortId$ squelch status: $tmnxRS232SocketSquelchStatus$

Cause

This notification may be triggered for the following reasons: 1) A continuous stream of data is being received for a specified period of time, tmnxRS232SocketSquelchDelay. 2) The continuous stream of data is no longer being received for a specified period of time, tmnxRS232SocketUnsquelchDelay.

Effect

Incoming data will be suppressed or unsuppressed accordingly.

Recovery

Determine root cause of far-end sending continuous data and resolve accordingly.

tmnxSharedPoolUseThreshExcd

Table 85. tmnxSharedPoolUseThreshExcd properties

Property name

Value

Application name

PORT

Event ID

2095

Event name

tmnxSharedPoolUseThreshExcd

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.76

Default severity

minor

Source stream

main

Message format string

Shared Pool Usage Threshold Exceeded Alarm

Cause

The notification tmnxSharedPoolUseThreshExcd is generated when the shared pool usage has gone above the threshold in the sampling interval. If shared pool started this new interval below the threshold and if it has gone above threshold at any point during the interval then this trap is generated.

Effect

Shared pool threshold usage went above the threshold percentage in this sampling interval.

Recovery

User can either increase the threshold percentage or can increase the size of the shared pool to subside the alarm.

tmnxSharedPoolUseThreshNotExcd

Table 86. tmnxSharedPoolUseThreshNotExcd properties

Property name

Value

Application name

PORT

Event ID

2096

Event name

tmnxSharedPoolUseThreshNotExcd

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.77

Default severity

minor

Source stream

main

Message format string

Shared Pool Usage Threshold Not Exceeded Alarm

Cause

The notification tmnxSharedPoolUseThreshNotExcd is generated when the shared pool usage has gone below the threshold in the sampling interval. If shared pool started this new interval above the threshold and bounced back to the normal threshold at any point during the interval then this trap is generated.

Effect

Shared pool threshold usage went below the threshold percentage in this sampling interval.

Recovery

None required.

tmnxTotalPoolUseThreshExcd

Table 87. tmnxTotalPoolUseThreshExcd properties

Property name

Value

Application name

PORT

Event ID

2093

Event name

tmnxTotalPoolUseThreshExcd

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.74

Default severity

minor

Source stream

main

Message format string

Total Pool Usage Threshold Exceeded Alarm

Cause

The notification tmnxTotalPoolUseThreshExcd is generated when the total pool usage has gone above the threshold in the sampling interval. If total pool started this new interval below the threshold and if it has gone above threshold at any point during the interval then this trap is generated.

Effect

Total pool threshold usage went above the threshold percentage in this sampling interval.

Recovery

User can either increase the threshold percentage or can increase the size of the total pool to subside the alarm.

tmnxTotalPoolUseThreshNotExcd

Table 88. tmnxTotalPoolUseThreshNotExcd properties

Property name

Value

Application name

PORT

Event ID

2094

Event name

tmnxTotalPoolUseThreshNotExcd

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.75

Default severity

minor

Source stream

main

Message format string

Total Pool Usage Threshold Not Exceeded Alarm

Cause

The notification tmnxTotalPoolUseThreshNotExcd is generated when the total pool usage has gone below the threshold in the sampling interval. If total pool started this new interval above the threshold and bounced back to the normal threshold at any point during the interval then this trap is generated.

Effect

Total pool threshold usage went below the threshold percentage in this sampling interval.

Recovery

None required.

tmnxWlanNetworkConnected

Table 89. tmnxWlanNetworkConnected properties

Property name

Value

Application name

PORT

Event ID

2074

Event name

tmnxWlanNetworkConnected

SNMP notification prefix and OID

TIMETRA-WLAN-MIB.tmnxWlanNotifications.1

Default severity

minor

Source stream

main

Message format string

Connected to WLAN network $tmnxWlanNotifyWlanNetworkId$ SSID ' $tmnxWlanNetworkSSID$'

Cause

The system generates a tmnxWlanNetworkConnected notification when the system establishes a WLAN connection to the specified network.

Effect

N/A

Recovery

N/A

tmnxWlanNetworkDisconnected

Table 90. tmnxWlanNetworkDisconnected properties

Property name

Value

Application name

PORT

Event ID

2075

Event name

tmnxWlanNetworkDisconnected

SNMP notification prefix and OID

TIMETRA-WLAN-MIB.tmnxWlanNotifications.2

Default severity

minor

Source stream

main

Message format string

Disconnected from WLAN network $tmnxWlanNotifyWlanNetworkId$ SSID ' $tmnxWlanNetworkSSID$'

Cause

The system generates a tmnxWlanNetworkDisconnected notification when the system loses the WLAN connection to the specified network.

Effect

N/A

Recovery

N/A

tPortAccEgrQGrpHostMatchFailure

Table 91. tPortAccEgrQGrpHostMatchFailure properties

Property name

Value

Application name

PORT

Event ID

2039

Event name

tPortAccEgrQGrpHostMatchFailure

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.41

Default severity

major

Source stream

main

Message format string

Could not find a specific port egress queue-group for host with inter-dest-id ' $tmnxHostMatchNotifyIntDestId$', org-string '$tmnxHostMatchNotifyOrgString$' and sub-id '$tmnxHostMatchNotifySubIdent$' on port $tmnxPortNotifyPortId$. The default 'policer-output-queues' queue-group will be used.

Cause

The tPortAccEgrQGrpHostMatchFailure notification indicates that a host match lookup failed to resolve a specific port egress queue-group. In such case the default policer-output-queue is used.

Effect

N/A

Recovery

N/A

tPortEgrVPortHostMatchFailure

Table 92. tPortEgrVPortHostMatchFailure properties

Property name

Value

Application name

PORT

Event ID

2040

Event name

tPortEgrVPortHostMatchFailure

SNMP notification prefix and OID

TIMETRA-PORT-MIB.tmnxPortNotification.42

Default severity

major

Source stream

main

Message format string

Could not find a specific port egress virtual port for host with inter-dest-id ' $tmnxHostMatchNotifyIntDestId$', org-string '$tmnxHostMatchNotifyOrgString$' and sub-id '$tmnxHostMatchNotifySubIdent$' on port $tmnxPortNotifyPortId$

Cause

The tPortEgrVPortHostMatchFailure notification indicates that a host match lookup failed to resolve a specific port egress virtual port.

Effect

N/A

Recovery

N/A