CHASSIS

Application name

CHASSIS

Event ID

4012

Event name

CpmIcPortSFFStatusDDMCorrupt

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.7

Default severity

minor

Source stream

main

Message format string

CPM interconnect port SFF DDM checksums do not match

Cause

The tmnxCpmIcPortSFFStatusFailure notification is generated when the value of tmnxCpmIcPortSFFStatus results in a value other than 'not-equipped (0)', or 'operational (1)'.

Effect

The SFF device is not operational and the associated CPM interconnect port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and reinsert the SFF device. If the problem persists then replace the SFF device.

Application name

CHASSIS

Event ID

4011

Event name

CpmIcPortSFFStatusFailure

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.7

Default severity

minor

Source stream

main

Message format string

CPM interconnect port SFF checksums do not match

Cause

The tmnxCpmIcPortSFFStatusFailure notification is generated when the value of tmnxCpmIcPortSFFStatus results in a value other than 'not-equipped (0)', or 'operational (1)'.

Effect

The SFF device is not operational and the associated CPM interconnect port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and reinsert the SFF device. If the problem persists then replace the SFF device.

Application name

CHASSIS

Event ID

4013

Event name

CpmIcPortSFFStatusReadError

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.7

Default severity

minor

Source stream

main

Message format string

CPM interconnect port SFF read failure

Cause

The tmnxCpmIcPortSFFStatusFailure notification is generated when the value of tmnxCpmIcPortSFFStatus results in a value other than 'not-equipped (0)', or 'operational (1)'.

Effect

The SFF device is not operational and the associated CPM interconnect port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and reinsert the SFF device. If the problem persists then replace the SFF device.

Application name

CHASSIS

Event ID

4014

Event name

CpmIcPortSFFStatusUnsupported

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.7

Default severity

minor

Source stream

main

Message format string

CPM interconnect port SFF unsupported type

Cause

The tmnxCpmIcPortSFFStatusFailure notification is generated when the value of tmnxCpmIcPortSFFStatus results in a value other than 'not-equipped (0)', or 'operational (1)'.

Effect

The SFF device is not operational and the associated CPM interconnect port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and reinsert the SFF device. If the problem persists then replace the SFF device.

Application name

CHASSIS

Event ID

4022

Event name

SfmIcPortSFFStatusDDMCorrupt

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxSfmIcPortNotifications.5

Default severity

minor

Source stream

main

Message format string

SFM interconnect port SFF DDM checksums do not match

Cause

The tmnxSfmIcPortSFFStatusFailure notification is generated when the value of tmnxSfmIcPortSFFStatus results in a value other than 'not-equipped (0)', or 'operational (1)'.

Effect

The SFF device is not operational and the associated SFM interconnect port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and reinsert the SFF device. If the problem persists then replace the SFF device.

Application name

CHASSIS

Event ID

4021

Event name

SfmIcPortSFFStatusFailure

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxSfmIcPortNotifications.5

Default severity

minor

Source stream

main

Message format string

SFM interconnect port SFF checksums do not match

Cause

The tmnxSfmIcPortSFFStatusFailure notification is generated when the value of tmnxSfmIcPortSFFStatus results in a value other than 'not-equipped (0)', or 'operational (1)'.

Effect

The SFF device is not operational and the associated SFM interconnect port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and reinsert the SFF device. If the problem persists then replace the SFF device.

Application name

CHASSIS

Event ID

4023

Event name

SfmIcPortSFFStatusReadError

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxSfmIcPortNotifications.5

Default severity

minor

Source stream

main

Message format string

SFM interconnect port SFF read failure

Cause

The tmnxSfmIcPortSFFStatusFailure notification is generated when the value of tmnxSfmIcPortSFFStatus results in a value other than 'not-equipped (0)', or 'operational (1)'.

Effect

The SFF device is not operational and the associated SFM interconnect port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and reinsert the SFF device. If the problem persists then replace the SFF device.

Application name

CHASSIS

Event ID

4024

Event name

SfmIcPortSFFStatusUnsupported

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxSfmIcPortNotifications.5

Default severity

minor

Source stream

main

Message format string

SFM interconnect port SFF unsupported type

Cause

The tmnxSfmIcPortSFFStatusFailure notification is generated when the value of tmnxSfmIcPortSFFStatus results in a value other than 'not-equipped (0)', or 'operational (1)'.

Effect

The SFF device is not operational and the associated SFM interconnect port cannot be used. The SFF and port will not recover without operator intervention.

Recovery

Remove and reinsert the SFF device. If the problem persists then replace the SFF device.

Application name

CHASSIS

Event ID

2233

Event name

tChassisAirflowDirMismatch

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.244

Default severity

critical

Source stream

main

Message format string

$tmnxHwClass$ $tmnxChassisNotifyHwIndex$: airflow direction mismatch

Cause

The tChassisAirflowDirMismatch notification is generated when airflow direction is not identical for all chassis fans and power-supply fans equipped by the physical chassis.

Effect

Mismatched airflow direction among fans may cause increased temperature, intermittent errors, and could damage components.

Recovery

The operator must identify a single preferred airflow direction, remove any chassis fans and power-supply fans which do not match it, and replace them with equipment having fans of the preferred airflow direction.

Application name

CHASSIS

Event ID

2234

Event name

tChassisAirflowDirMismatchClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.245

Default severity

critical

Source stream

main

Message format string

$tmnxHwClass$ $tmnxChassisNotifyHwIndex$: airflow direction mismatch cleared

Cause

The tChassisAirflowDirMismatchClr notification is generated to indicate that all chassis fans and power-supply fans with mismatched airflow directions have been replaced, and all chassis-fans and power-supply fans share the same direction.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2235

Event name

tChassisPowerSupplyMismatch

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.246

Default severity

critical

Source stream

main

Message format string

$tmnxHwClass$ $tmnxChassisNotifyHwIndex$: power-supply type mismatch

Cause

The tChassisPowerSupplyMismatch notification is generated when power-supply elements equipped to the physical chassis are not all of the same type.

Effect

There is an increased risk of power-supply failure. Intermittent error or damage to components may also result.

Recovery

The operator must identify a single preferred or required power-supply type, remove any power-supply elements of other types, and replace them with equipment of the preferred power-supply type.

Application name

CHASSIS

Event ID

2236

Event name

tChassisPowerSupplyMismatchClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.247

Default severity

critical

Source stream

main

Message format string

$tmnxHwClass$ $tmnxChassisNotifyHwIndex$: power-supply type mismatch cleared

Cause

The tChassisPowerSupplyMismatchClr notification is generated to indicate that all power-supply elements of mismatched types have been replaced, and all power-supply elements now share the same type.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2237

Event name

tChassisPowerSupplyUnsup

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.248

Default severity

critical

Source stream

main

Message format string

$tmnxChassisNotifyHwIndex$: power-supply not supported

Cause

The tChassisPowerSupplyUnsup notification is generated when power-supply elements equipped to the physical chassis are not of a supported type.

Effect

There is an increased risk of power-supply failure. Intermittent error or damage to components may also result.

Recovery

The operator must identify any equipped power supply elements of unsupported type, remove them, and replace them with equipment of a supported power-supply type

Application name

CHASSIS

Event ID

2220

Event name

tIPsecEsaVmMemHighWatermark

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.231

Default severity

minor

Source stream

main

Message format string

The memory usage ratio for ESA-VM $tmnxEsaNotifyId$/$tmnxEsaVmNotifyId$ has almost reached the maximum value.

Cause

A tIPsecEsaVmMemHighWatermark notification is generated when the ESA VM memory usage ratio has almost reached the maximum value.

Effect

The system may stop accepting new IKE states shortly.

Recovery

Use fewer SAs for each IKE tunnel.

Application name

CHASSIS

Event ID

2219

Event name

tIPsecEsaVmMemLowWatermark

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.230

Default severity

minor

Source stream

main

Message format string

The memory usage ratio for ESA-VM $tmnxEsaNotifyId$/$tmnxEsaVmNotifyId$ has dropped back to the normal level.

Cause

A tIPsecEsaVmMemLowWatermark notification is generated when the ESA VM memory usage ratio has dropped back to the normal level.

Effect

The system accepts new IKE states.

Recovery

There is no recovery required for this notification.

Application name

CHASSIS

Event ID

2151

Event name

tIPsecIsaMemHighWatermark

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.138

Default severity

minor

Source stream

main

Message format string

The memory usage ratio for ISA $tmnxCardSlotNum$/$tmnxMDASlotNum$ has almost reached the maximum value.

Cause

A tIPsecIsaMemHighWatermark notification is generated when the ISA card memory usage ratio has almost reached the maximum value.

Effect

The system may stop accepting new IKE states shortly.

Recovery

Use fewer SAs for each IKE tunnel.

Application name

CHASSIS

Event ID

2150

Event name

tIPsecIsaMemLowWatermark

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.137

Default severity

minor

Source stream

main

Message format string

The memory usage ratio for ISA $tmnxCardSlotNum$/$tmnxMDASlotNum$ has dropped back to the normal level.

Cause

A tIPsecIsaMemLowWatermark notification is generated when the ISA card memory usage ratio has dropped back to the normal level.

Effect

The system accepts new IKE states.

Recovery

There is no recovery required for this notification.

Application name

CHASSIS

Event ID

2152

Event name

tIPsecIsaMemMax

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.139

Default severity

minor

Source stream

main

Message format string

The memory usage for ISA $tmnxCardSlotNum$/$tmnxMDASlotNum$ has reached the maximum value.

Cause

A tIPsecIsaMemMax notification is generated when the ISA card memory usage ratio has reached the maximum value.

Effect

The system stops accepting new IKE states.

Recovery

Use fewer SAs for each IKE tunnel.

Application name

CHASSIS

Event ID

3014

Event name

tmnxAlarmInputVoltageFailure

SNMP notification prefix and OID

TIMETRA-SAS-ALARM-INPUT-MIB.tmnxSASChassisNotification.10

Default severity

major

Source stream

main

Message format string

Class $tmnxHwClass$ : alarm input voltage failure

Cause

A tmnxAlarmInputVoltageFailure notification is sent when the internal power supply for alarm inputs fails. The value of tmnxSasAlarmInputPowerStatus indicates whether the power to external alarm inputs is on or off.

Effect

If the alarm inputs use the internal power supply, then a failure in the power supply will cause state change event alarms to not be raised.

Recovery

Check the internal power source for alarm inputs and rectify the problem.

Application name

CHASSIS

Event ID

2187

Event name

tmnxBluetoothModuleConnectionChg

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.178

Default severity

minor

Source stream

main

Message format string

Bluetooth Module $tmnxChassisNotifyCpmCardSlotNum$ got $tmnxBluetoothModuleConnected$ to $tmnxBluetoothModuleConnectedMac$.

Cause

The tmnxBluetoothModuleConnectionChg notification is generated when a remote Bluetooth device connects with or disconnects from the indicated Bluetooth module.

Effect

A Bluetooth device has connected with or disconnected from a Bluetooth module.

Recovery

No recovery required.

Application name

CHASSIS

Event ID

5164

Event name

tmnxCardResMacFdbHighUsgClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.149

Default severity

minor

Source stream

main

Message format string

The FDB table usage for card $tmnxMacScaleCardSlotNum$ is below 90% of the card limit

Cause

The tmnxCardResMacFdbHighUsgClr notification is generated when the FDB table size drops below 90% of the card limit.

Effect

The FDB table size for the card drops below 90% of the card limit.

Recovery

None needed.

Application name

CHASSIS

Event ID

5163

Event name

tmnxCardResMacFdbHighUsgSet

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.148

Default severity

minor

Source stream

main

Message format string

The FDB table usage for card $tmnxMacScaleCardSlotNum$ is above 95% of the card limit

Cause

The tmnxCardResMacFdbHighUsgSet notification is generated when the FDB table size exceeds 95% of the card limit.

Effect

The FDB table size for the card exceeds 95% of the card limit.

Recovery

None needed.

Application name

CHASSIS

Event ID

2052

Event name

tmnxChassisHiBwMcastAlarm

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.43

Default severity

minor

Source stream

main

Message format string

Class $tmnxHwClass$ : Plane shared by multiple multicast high bandwidth taps

Cause

The tmnxChassisHiBwMcastAlarm notification is generated when a plane is shared by more than one high bandwidth multicast tap.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2016

Event name

tmnxChassisNotificationClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.25

Default severity

major

Source stream

main

Message format string

Clear $tmnxHwClass$ $tmnxHwIndex$ $tmnxChassisNotifyOID$

Cause

A trap indicating the clear of a chassis notification identified by tmnxChassisNotifyOID.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2034

Event name

tmnxChassisUpgradeComplete

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.42

Default severity

major

Source stream

main

Message format string

Class $tmnxHwClass$ : software upgrade complete

Cause

The tmnxChassisUpgradeComplete notification is generated to indicate that all the IOMs are running matching software versions in reference to the active CPM software version changed as part of the upgrade process.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2033

Event name

tmnxChassisUpgradeInProgress

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.41

Default severity

major

Source stream

main

Message format string

Class $tmnxHwClass$ : software upgrade in progress

Cause

The tmnxChassisUpgradeInProgress notification is generated only after a CPM switchover occurs and the new active CPM is running new software, while the IOMs or XCMs are still running old software. This is the start of the upgrade process. The tmnxChassisUpgradeInProgress notification will continue to be generated every 30 minutes while at least one IOM is still running older software.

Effect

A software mismatch between the CPM and IOM or XCM is generally fine for a short duration (during an upgrade) but may not allow for correct long-term operation.

Recovery

Complete the upgrade of all IOMs or XCMs.

Application name

CHASSIS

Event ID

4009

Event name

tmnxCpmALocalIcPortAvail

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.6

Default severity

major

Source stream

main

Message format string

CPM $tmnxChassisNotifyCpmCardSlotNum$ can reach the chassis using its local CPM interconnect ports

Cause

The tmnxCpmLocalIcPortAvail notification is generated when the CPM re-establishes communication with the other chassis using its local CPM interconnect ports.

Effect

A new control communications path is now available between the CPM and the other chassis.

Recovery

N/A

Application name

CHASSIS

Event ID

4007

Event name

tmnxCpmANoLocalIcPort

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.5

Default severity

major

Source stream

main

Message format string

CPM $tmnxChassisNotifyCpmCardSlotNum$ can not reach the chassis using its local CPM interconnect ports

Cause

The tmnxCpmNoLocalIcPort alarm is generated when the CPM cannot reach the other chassis using its local CPM interconnect ports.

Effect

Another control communications path may still be available between the CPM and the other chassis via the mate CPM in the same chassis. If that alternative path is not available then complete disruption of control communications to the other chassis will occur and the tmnxInterChassisCommsDown alarm is raised. A tmnxCpmNoLocalIcPort alarm on the active CPM indicates that a further failure of the local CPM interconnect ports on the standby CPM will cause complete disruption of control communications to the other chassis and the tmnxInterChassisCommsDown alarm is raised. A tmnxCpmNoLocalIcPort alarm on the standby CPM indicates that a CPM switchover may cause temporary disruption of control communications to the other chassis while the rebooting CPM comes back into service.

Recovery

Ensure that all CPM interconnect ports in the system are properly cabled together with working cables.

Application name

CHASSIS

Event ID

4010

Event name

tmnxCpmBLocalIcPortAvail

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.6

Default severity

major

Source stream

main

Message format string

CPM $tmnxChassisNotifyCpmCardSlotNum$ can reach the chassis using its local CPM interconnect ports

Cause

The tmnxCpmLocalIcPortAvail notification is generated when the CPM re-establishes communication with the other chassis using its local CPM interconnect ports.

Effect

A new control communications path is now available between the CPM and the other chassis.

Recovery

N/A

Application name

CHASSIS

Event ID

4008

Event name

tmnxCpmBNoLocalIcPort

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.5

Default severity

major

Source stream

main

Message format string

CPM $tmnxChassisNotifyCpmCardSlotNum$ can not reach the chassis using its local CPM interconnect ports

Cause

The tmnxCpmNoLocalIcPort alarm is generated when the CPM cannot reach the other chassis using its local CPM interconnect ports.

Effect

Another control communications path may still be available between the CPM and the other chassis via the mate CPM in the same chassis. If that alternative path is not available then complete disruption of control communications to the other chassis will occur and the tmnxInterChassisCommsDown alarm is raised. A tmnxCpmNoLocalIcPort alarm on the active CPM indicates that a further failure of the local CPM interconnect ports on the standby CPM will cause complete disruption of control communications to the other chassis and the tmnxInterChassisCommsDown alarm is raised. A tmnxCpmNoLocalIcPort alarm on the standby CPM indicates that a CPM switchover may cause temporary disruption of control communications to the other chassis while the rebooting CPM comes back into service.

Recovery

Ensure that all CPM interconnect ports in the system are properly cabled together with working cables.

Application name

CHASSIS

Event ID

2057

Event name

tmnxCpmCardSyncFileNotPresent

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.45

Default severity

minor

Source stream

main

Message format string

Class $tmnxHwClass$ : Optional file $tmnxChassisNotifyCardSyncFile$ is not present during sync operation

Cause

The tmnxCpmCardSyncFileNotPresent notification is generated when the redundancy file synchronization failed to locate an optional file.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

4016

Event name

tmnxCpmIcPortDDMClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.9

Default severity

minor

Source stream

main

Message format string

CPM interconnect port SFF DDM $tmnxDDMLaneIdOrModule$ ($tmnxDDMFailedObject$) cleared

Cause

The tmnxCpmIcPortDDMFailure notification is generated when an SFF in a CPM interconnect port that supports Digital Diagnostic Monitoring (DDM) clears a failed state.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

4015

Event name

tmnxCpmIcPortDDMFailure

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.8

Default severity

minor

Source stream

main

Message format string

CPM interconnect port SFF DDM $tmnxDDMLaneIdOrModule$ ($tmnxDDMFailedObject$) raised

Cause

The tmnxCpmIcPortDDMFailure notification is generated when an SFF in a CPM interconnect port that supports Digital Diagnostic Monitoring (DDM) enters a failed state.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

4003

Event name

tmnxCpmIcPortDown

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.1

Default severity

minor

Source stream

main

Message format string

CPM interconnect port is not operational. Error code = $tmnxCpmIcPortOperState$

Cause

The tmnxCpmIcPortDown alarm is generated when the CPM interconnect port is not operational. The reason may be a cable connected incorrectly, a disconnected cable, a faulty cable, or a misbehaving CPM interconnect port or card.

Effect

At least one of the control plane paths used for inter-chassis CPM communication is not operational. Other paths may be available.

Recovery

A manual verification and testing of each CPM interconnect port is required to ensure fully functional operation. Physical replacement of cabling may be required.

Application name

CHASSIS

Event ID

4005

Event name

tmnxCpmIcPortSFFInserted

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.3

Default severity

minor

Source stream

main

Message format string

CPM interconnect port SFF inserted

Cause

The tmnxCpmIcPortSFFInserted notification is generated when the small form factor (SFF) pluggable optical module (eg. QSFP) is inserted into a CPM interconnect port.

Effect

This event is for notification only.

Recovery

N/A

Application name

CHASSIS

Event ID

4006

Event name

tmnxCpmIcPortSFFRemoved

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.4

Default severity

minor

Source stream

main

Message format string

CPM interconnect port SFF removed

Cause

The tmnxCpmIcPortSFFRemoved notification is generated when the SFF (eg. QSFP) is removed from the CPM interconnect port. Removing an SFF causes both this trap, and also a tmnxCpmIcPortDown event.

Effect

Removing the SFF will cause the CPM interconnect port to go down. This port will no longer be able to be used as part of the control plane between chassis but other paths may be available.

Recovery

Insert a working SFF into the port.

Application name

CHASSIS

Event ID

4004

Event name

tmnxCpmIcPortUp

SNMP notification prefix and OID

TIMETRA-CHASSIS-INTERCONNECT-MIB.tmnxCpmIcPortNotifications.2

Default severity

minor

Source stream

main

Message format string

CPM interconnect port is operational

Cause

The tmnxCpmIcPortUp notification is generated when the CPM interconnect port is operational again.

Effect

A control plane communication path between CPM cards in the different chassis have been established.

Recovery

N/A

Application name

CHASSIS

Event ID

2153

Event name

tmnxCpmMemSizeMismatch

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.140

Default severity

major

Source stream

main

Message format string

The standby CPM $tmnxChassisNotifyCpmCardSlotNum$ has a different memory size than the active $tmnxChassisNotifyHwIndex$

Cause

A tmnxCpmMemSizeMismatch notification is generated when the RAM memory size of the standby CPM (i.e., tmnxChassisNotifyCpmCardSlotNum) is different than the active CPM (i.e., tmnxChassisNotifyHwIndex).

Effect

There is an increased risk of the memory overflow on the standby CPM during the CPM switchover.

Recovery

Use CPMs with the same memory size.

Application name

CHASSIS

Event ID

2154

Event name

tmnxCpmMemSizeMismatchClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.141

Default severity

cleared

Source stream

main

Message format string

The standby CPM $tmnxChassisNotifyCpmCardSlotNum$ has the same memory size as the active $tmnxChassisNotifyHwIndex$

Cause

A tmnxCpmMemSizeMismatchClear notification is generated when the RAM memory sizes of the standby (i.e., tmnxChassisNotifyCpmCardSlotNum) and active (i.e., tmnxChassisNotifyHwIndex) CPMs become matched.

Effect

The tmnxCpmMemSizeMismatch notification is cleared.

Recovery

There is no recovery required for this notification.

Application name

CHASSIS

Event ID

2084

Event name

tmnxDcpCardFpEventOvrflw

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.72

Default severity

minor

Source stream

main

Message format string

TODO

Cause

The tmnxDcpCardFpEventOvrflw notification is generated when a flood of distributed CPU FP protection events occur on a particular card and some of the events are lost due to event throttling mechanism.

Effect

Some FP notifications configured on the card may not be received.

Recovery

Notifications will resume once the event throttling ends.

Application name

CHASSIS

Event ID

2089

Event name

tmnxDcpCardFpEventOvrflwClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.77

Default severity

minor

Source stream

main

Message format string

TODO

Cause

The tmnxDcpCardFpEventOvrflwClr notification is generated when the event throttling has ended for distributed CPU protection FP events on a particular card.

Effect

Notifications are received again since the event throttling has ended.

Recovery

There is no recovery for this notification.

Application name

CHASSIS

Event ID

2085

Event name

tmnxDcpCardSapEventOvrflw

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.73

Default severity

minor

Source stream

main

Message format string

TODO

Cause

The tmnxDcpCardSapEventOvrflw notification is generated when a flood of distributed CPU protection SAP events occur on a particular card and some of the events are lost due to event throttling mechanism.

Effect

Some SAP notifications configured on the card may not be received.

Recovery

Notifications will resume once the event throttling ends.

Application name

CHASSIS

Event ID

2090

Event name

tmnxDcpCardSapEventOvrflwClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.78

Default severity

minor

Source stream

main

Message format string

TODO

Cause

The tmnxDcpCardSapEventOvrflwClr notification is generated when the event throttling has ended for distributed CPU protection SAP events on a particular card.

Effect

Notifications are received again since the event throttling has ended.

Recovery

There is no recovery for this notification.

Application name

CHASSIS

Event ID

2086

Event name

tmnxDcpCardVrtrIfEventOvrflw

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.74

Default severity

minor

Source stream

main

Message format string

TODO

Cause

The tmnxDcpCardVrtrIfEventOvrflw notification is generated when a flood of distributed CPU protection network-interface events occur on a particular card and some of the events are lost due to event throttling mechanism.

Effect

Some network-interface notifications configured on the card may not be received.

Recovery

Notifications will resume once the event throttling ends.

Application name

CHASSIS

Event ID

2091

Event name

tmnxDcpCardVrtrIfEventOvrflwClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.79

Default severity

minor

Source stream

main

Message format string

TODO

Cause

The tmnxDcpCardVrtrIfEventOvrflwClr notification is generated when the event throttling has ended for distributed CPU protection network-interface events on a particular card.

Effect

Notifications are received again since the event throttling has ended.

Recovery

There is no recovery for this notification.

Application name

CHASSIS

Event ID

2088

Event name

tmnxDcpFpDynPoolUsageHiAlmClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.76

Default severity

minor

Source stream

main

Message format string

TODO

Cause

The tmnxDcpFpDynPoolUsageHiAlmClear notification is generated when the dynamic enforcement policer pool usage on the forwarding plane is no longer exhausted.

Effect

Dynamic enforcement policers are available in the free pool to be allocated when needed.

Recovery

There is no recovery required for this notification.

Application name

CHASSIS

Event ID

2087

Event name

tmnxDcpFpDynPoolUsageHiAlmRaise

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.75

Default severity

minor

Source stream

main

Message format string

TODO

Cause

The tmnxDcpFpDynPoolUsageHiAlmRaise notification is generated when the dynamic enforcement policer pool usage on the forwarding plane is nearly exhausted.

Effect

Dynamic enforcement policers may not get allocated on the forwarding plane.

Recovery

This notification will be cleared when either the dynamic enforcement policer pool is increased or the usage drops.

Application name

CHASSIS

Event ID

2005

Event name

tmnxEnvTempTooHigh

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.2

Default severity

major

Source stream

main

Message format string

$tmnxHwClass$ $tmnxChassisNotifyHwIndex$: temperature too high

Cause

Generated when the temperature sensor reading on an equipment object is greater than its configured threshold.

Effect

This could be causing intermittent errors and could also cause permanent damage to components.

Recovery

Remove or power down the affected cards, or improve the cooling to the node. More powerful fan trays may also be required.

Application name

CHASSIS

Event ID

2161

Event name

tmnxEqBpEpromFail

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.150

Default severity

critical

Source stream

main

Message format string

CPM BP EPROM could not be accessed

Cause

The tmnxEqBpEpromFail notification is generated when the active CPM is no longer able to access the backplane EPROM due to a hardware defect.

Effect

The active CPM is at risk of failing to initialize after node reboot due to not being able to access the BP EPROM to read the chassis type.

Recovery

Contact Nokia customer support.

Application name

CHASSIS

Event ID

2162

Event name

tmnxEqBpEpromFailClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.151

Default severity

cleared

Source stream

main

Message format string

CPM BP EPROM can now be accessed

Cause

The tmnxEqBpEpromFailClear notification is generated when the EPROM error condition is cleared.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2163

Event name

tmnxEqBpEpromWarning

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.152

Default severity

minor

Source stream

main

Message format string

One CPM BP EPROM could not be accessed

Cause

The tmnxEqBpEpromWarning notification is generated when the active CPM is no longer able to access one backplane EPROM due to a hardware defect, but a redundant EPROM is present and accessible.

Effect

There is no effect on system operation.

Recovery

No recovery action required.

Application name

CHASSIS

Event ID

2164

Event name

tmnxEqBpEpromWarningClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.153

Default severity

cleared

Source stream

main

Message format string

All CPM BP EPROMs can be accessed

Cause

The tmnxEqBpEpromWarningClear notification is generated when the backplane EPROM warning condition is cleared.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2103

Event name

tmnxEqCardChipIfCellEvent

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.90

Default severity

minor

Source stream

main

Message format string

Possible messages:

• $tmnxHwIndex$ experienced internal datapath cell errors

• Slot $tmnxHwIndex$ experienced internal datapath cell errors on complex $tmnxCardComplexNumber$

Cause

The tmnxEqCardChipIfCellEvent notification is generated when an inter-chip interface (XPL2 bundle) experiences internal datapath cell errors.

Effect

Contact Nokia customer support.

Recovery

Contact Nokia customer support.

Application name

CHASSIS

Event ID

2102

Event name

tmnxEqCardChipIfDownEvent

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.89

Default severity

minor

Source stream

main

Message format string

Possible messages:

• $tmnxHwIndex$ experienced an internal datapath problem

• Slot $tmnxHwIndex$ experienced an internal datapath problem on complex $tmnxCardComplexNumber$

Cause

The tmnxEqCardChipIfDownEvent notification is generated when an inter-chip interface (XPL2 bundle) experiences an internal datapath problem.

Effect

7750 SR/7450 ESS: The IOM or IMM will either remain operational or the card will reset along with its associated MDAs. 7950 XRS: The associated XMA (MDA CLI context) will either remain operational or it will reset. The XCM (CLI card context) will not reset.

Recovery

Contact Nokia customer support.

Application name

CHASSIS

Event ID

2001

Event name

tmnxEqCardFailure

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.7

Default severity

major

Source stream

main

Message format string

Class $tmnxHwClass$ : failed, reason: $tmnxChassisNotifyCardFailureReason$

Cause

Generated when one of the cards in a chassis has failed. The card type may be IOM (or XCM), MDA (or XMA), SFM, CCM, CPM, Compact Flash, etc. The reason is indicated in the details of the log event or alarm, and also available in the tmnxChassisNotifyCardFailureReason attribute included in the SNMP notification.

Effect

The effect is dependent on the card that has failed. IOM (or XCM) or MDA (or XMA) failure will cause a loss of service for all services running on that card. A fabric failure can impact traffic to/from all cards. 7750 SR/7450 ESS - If the IOM/IMM fails then the two associated MDAs for the slot will also go down. 7950 XRS - If one out of two XMAs fails in a XCM slot then the XCM will remain up. If only one remaining operational XMA within a XCM slot fails, then the XCM will go into a booting operational state.

Recovery

Before taking any recovery steps, collect a tech-support file, then try resetting (clear) the card. If that doesn't work then try removing and then reinserting the card. If that doesn't work then replace the card.

Application name

CHASSIS

Event ID

2032

Event name

tmnxEqCardFirmwareUpgraded

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.40

Default severity

major

Source stream

main

Message format string

Class $tmnxHwClass$ : firmware upgraded

Cause

Generated when a card is hot-inserted into the chassis and its firmware is automatically upgraded. The card type may be IOM or CPM module.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2002

Event name

tmnxEqCardInserted

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.8

Default severity

minor

Source stream

main

Message format string

Class $tmnxHwClass$ : inserted

Cause

Generated when a card is inserted into the chassis. The card type may be IOM, Fabric, MDA, MCM, CCM CPM module, compact flash module, etc.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

6007

Event name

tmnxEqCardMissing

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.303

Default severity

major

Source stream

main

Message format string

Class $tmnxHwClass$ : missing

Cause

The tmnxEqCardMissing notification is generated when the card configuration is present but the card is not detected in the slot.

Effect

The missing card will cause a loss of service for all services running on that card.

Recovery

Before taking any recovery steps collect a tech-support file, then try inserting a compatible card into the slot.

Application name

CHASSIS

Event ID

6008

Event name

tmnxEqCardMissingClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.304

Default severity

cleared

Source stream

main

Message format string

Class $tmnxHwClass$ : missing clear

Cause

The tmnxEqCardMissingClear notification is generated when the card configuration is removed or the card is detected in the slot.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2076

Event name

tmnxEqCardPChipCamEvent

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.64

Default severity

critical

Source stream

main

Message format string

A fault has been detected in the hardware on IOM $tmnxSlotNum$-forwarding engine $tmnxCardComplexNumber$

Cause

The tmnxEqCardPChipCamEvent notification is generated when either an IOM or a CPM experiences a persistent occurrence of a PChip CAM error. On a CPM card, the tmnxCardComplexNumber will be fixed to the value zero (0).

Effect

Contact Nokia customer support.

Recovery

Contact Nokia customer support.

Application name

CHASSIS

Event ID

2059

Event name

tmnxEqCardPChipError

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.47

Default severity

minor

Source stream

main

Message format string

Slot $tmnxCardSlotNum$ detected $tmnxCardFwdDirection$ FCS errors on complex $tmnxCardComplexNumber$. Source card(s) of detected errors: $tmnxCardSrcSlotBitmap$

Cause

The tmnxEqCardPChipError notification is generated when persistent FCS errors are detected by the P chip in either the ingress or egress datapath/complex. The value tmnxCardSrcSlotBitmap is only used for the egress datapath/complex direction.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2063

Event name

tmnxEqCardPChipMemoryEvent

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.51

Default severity

minor

Source stream

main

Message format string

Possible messages:

• $tmnxHwIndex$ experienced a pchip memory error occurrence

• Slot $tmnxHwIndex$ experienced a pchip parity error occurrence on complex $tmnxCardComplexNumber$

Cause

The tmnxEqCardPChipMemoryEvent notification is generated when a P-chip experiences an occurrence of a memory error.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2098

Event name

tmnxEqCardQChipBufMemoryEvent

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.86

Default severity

minor

Source stream

main

Message format string

Possible messages:

• $tmnxHwIndex$ experienced a Q-chip buffer memory error occurrence

• Slot $tmnxHwIndex$ experienced a Q-chip buffer memory error occurrence on complex $tmnxCardComplexNumber$

Cause

The tmnxEqCardQChipBufMemoryEvent notification is generated when a Q-chip experiences an occurrence of a buffer memory error.

Effect

Contact Nokia customer support.

Recovery

Contact Nokia customer support.

Application name

CHASSIS

Event ID

2101

Event name

tmnxEqCardQChipIntMemoryEvent

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.88

Default severity

minor

Source stream

main

Message format string

Possible messages:

• $tmnxHwIndex$ experienced a qchip internal memory error occurrence

• Slot $tmnxHwIndex$ experienced a qchip internal memory error occurrence on complex $tmnxCardComplexNumber$

Cause

The tmnxEqCardQChipIntMemoryEvent notification is generated when a Q-chip experiences an occurrence of an internal memory error.

Effect

Contact Nokia customer support.

Recovery

Contact Nokia customer support.

Application name

CHASSIS

Event ID

2099

Event name

tmnxEqCardQChipStatsMemoryEvent

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.87

Default severity

minor

Source stream

main

Message format string

Possible messages:

• $tmnxHwIndex$ experienced a Q-chip statistics memory error occurrence

• Slot $tmnxHwIndex$ experienced a Q-chip statistics memory error occurrence on complex $tmnxCardComplexNumber$

Cause

The tmnxEqCardQChipStatsMemoryEvent notification is generated when a Q-chip experiences an occurrence of a statistics memory error.

Effect

Contact Nokia customer support.

Recovery

Contact Nokia customer support.

Application name

CHASSIS

Event ID

2003

Event name

tmnxEqCardRemoved

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.9

Default severity

major

Source stream

main

Message format string

Class $tmnxHwClass$ : removed

Cause

Generated when a card is removed from the chassis. The card type may be IOM (or XCM), MDA (or XMA), SFM, CCM, CPM, Compact Flash, etc.

Effect

The effect is dependent on the card that has been removed. IOM (or XCM) or MDA (or XMA) removal will cause a loss of service for all services running on that card. A fabric removal can impact traffic to/from all cards.

Recovery

Before taking any recovery steps collect a tech-support file, then try reinserting the card. If that doesn't work then replace the card.

Application name

CHASSIS

Event ID

2060

Event name

tmnxEqCardSoftResetAlarm

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.48

Default severity

minor

Source stream

main

Message format string

Slot $tmnxHwIndex$ entered soft-reset state $tmnxCardSoftResetState$

Cause

The tmnxEqCardSoftResetAlarm notification is generated when an IOM card enters and exits the 'soft-reset' state.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2110

Event name

tmnxEqCardTChipParityEvent

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.97

Default severity

minor

Source stream

main

Message format string

Slot $tmnxHwIndex$ experienced a T-chip memory error occurrence on complex $tmnxCardComplexNumber$

Cause

The tmnxEqCardTChipParityEvent notification is generated when a T-chip experiences an occurrence of an internal memory error.

Effect

Contact Nokia customer support.

Recovery

Contact Nokia customer support.

Application name

CHASSIS

Event ID

2126

Event name

tmnxEqDataPathFailureProtImpact

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.113

Default severity

minor

Source stream

main

Message format string

$tmnxHwClass$ $tmnxHwIndex$ experienced a datapath failure which impacted a protocol.

Cause

The tmnxEqDataPathFailureProtImpact notification is generated when a slot experienced a data path failure which impacted a protocol.

Effect

Services-related data associated with the impacted protocol may be lost.

Recovery

N/A

Application name

CHASSIS

Event ID

2023

Event name

tmnxEqFlashDataLoss

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.32

Default severity

major

Source stream

main

Message format string

Class $tmnxHwClass$ : probable data loss

Cause

tmnxEqFlashDataLoss is generated when an error occurs while data was being written to the compact flash. This notification indicates a probable data loss.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2024

Event name

tmnxEqFlashDiskFull

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.33

Default severity

major

Source stream

main

Message format string

Class $tmnxHwClass$ : $tmnxChassisNotifyDiskFullReason$

Cause

tmnxEqFlashDiskFull is generated when there is no space left on the compact flash. No more data can be written to it.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2200

Event name

tmnxEqFpgaSoftError

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.211

Default severity

minor

Source stream

main

Message format string

Slot $tmnxHwIndex$ detected an SEU event

Cause

The tmnxEqFpgaSoftError notification is for experimental use only and should remain suppressed unless advised otherwise by Nokia customer support.

Effect

Contact Nokia customer support.

Recovery

Contact Nokia customer support.

Application name

CHASSIS

Event ID

2078

Event name

tmnxEqHwEnhancedCapability

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.66

Default severity

major

Source stream

main

Message format string

CPM Upgrade In Progress. Card in slot $tmnxCardSlotNum$ has enhanced capabilities.

Cause

The tmnxEqHwEnhancedCapability notification is generated when the hardware, specified by the supplied objects, consists of enhanced capabilities as compared to the active hardware.

Effect

The system behaves normally under this situation, however, switching to the newer hardware will put the system in an incompatible state with the currently active hardware. That is, once this device takes activity, the lesser capable hardware will fail to communicate with it. In this mode, the system is deemed in a 'one-way upgrade' scenario.

Recovery

Two modes of recovery exist for this notification: 1) Remove the enhanced hardware, and supply a more compatible device (status quo) with the active hardware. 2) Switch to the enhanced device, and replace the older hardware with a similarly enhanced device (upgrade).

Application name

CHASSIS

Event ID

2207

Event name

tmnxEqHwEventDetected

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.218

Default severity

minor

Source stream

main

Message format string

$tmnxHwClass$ $tmnxChassisNotifyHwIndex$: $tmnxEqNotifyHwEventType$ event detected. (detail: $tmnxEqNotifyHwEventDetail$, action:$tmnxEqNotifyHwEventAction$)

Cause

Generated when events or errors being monitored are detected by hardware component.

Effect

The system will perform the configured action on the hardware component.

Recovery

Check hardware component.

Application name

CHASSIS

Event ID

2104

Event name

tmnxEqLowSwitchFabricCap

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.91

Default severity

major

Source stream

main

Message format string

The switch fabric capacity is less than the forwarding capacity of $tmnxHwClass$ $tmnxHwIndex$ due to errors in fabric links.

Cause

The tmnxEqLowSwitchFabricCap alarm is generated when the total switch fabric capacity becomes less than the IOM capacity due to link failures. At least one of the taps on the IOM is below 100% capacity.

Effect

There is diminished switch fabric capacity to forward service-impacting information.

Recovery

If the system does not self-recover, the IOM must be rebooted.

Application name

CHASSIS

Event ID

2105

Event name

tmnxEqLowSwitchFabricCapClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.92

Default severity

major

Source stream

main

Message format string

The switch fabric capacity alarm for $tmnxHwClass$ $tmnxHwIndex$ was cleared.

Cause

The tmnxEqLowSwitchFabricCapClear notification is generated when the link failures that resulted in the tmnxEqLowSwitchFabricCap alarm to be raised have been resolved.

Effect

There is sufficient switch fabric capacity to forward service-impacting information.

Recovery

N/A

Application name

CHASSIS

Event ID

2056

Event name

tmnxEqMdaCfgNotCompatible

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.44

Default severity

major

Source stream

main

Message format string

Class $tmnxHwClass$ : configuration not compatible with equipped MDA

Cause

Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the current configuration on the MDA's ports is not compatible with the inserted MDA.

Effect

Though services can still be created, if the tmnxMdaNotifyType is the same as the tmnxMDAEquippedType then the MDA will fail to operate as configured and will be in a failed state.

Recovery

Change the configuration to reflect the capabilities of the MDA port, or switch out/re-provision the MDA for one that is compatible.

Application name

CHASSIS

Event ID

2129

Event name

tmnxEqMdaIngrXplError

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.116

Default severity

minor

Source stream

main

Message format string

MDA $tmnxCardSlotNum$/$tmnxEqMdaSlotNum$ experienced an ingress XPL error occurrence.

Cause

The tmnxEqMdaIngrXplError notification is generated when an MDA exhibits persistent ingress XPL errors.

Effect

Contact Nokia customer support.

Recovery

Contact Nokia customer support.

Application name

CHASSIS

Event ID

2061

Event name

tmnxEqMdaSyncENotCompatible

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.49

Default severity

major

Source stream

main

Message format string

Provisioned synchronous ethernet not compatible with equipped MDA

Cause

The tmnxEqMdaSyncENotCompatible notification is generated when an MDA card is inserted into a slot of an IOM. The MDA is compatible with the currently provisioned MDA, but the currently configured synchronous ethernet, tmnxMDASynchronousEthernet, is not compatible with the inserted MDA.

Effect

Though services can still be created, if the tmnxMdaNotifyType is the same as the tmnxMDAEquippedType then the MDA will fail to operate as configured and will be in a failed state.

Recovery

Change the configuration to reflect the capabilities of the MDA port, or switch out/re-provision the MDA for one that is compatible.

Application name

CHASSIS

Event ID

2058

Event name

tmnxEqMdaXplError

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.46

Default severity

minor

Source stream

main

Message format string

MDA $tmnxCardSlotNum$/$tmnxMDASlotNum$ experienced an egress XPL error occurrence.

Cause

The tmnxEqMdaXplError notification is generated when an MDA exhibits persistent egress XPL Errors.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2137

Event name

tmnxEqMgmtEthRedStandbyClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.122

Default severity

minor

Source stream

main

Message format string

The active CPM's management Ethernet port $tmnxChassisNotifyMgmtEthRedPort$ is serving as the system's management Ethernet port.

Cause

The tmnxEqMgmtEthRedStandbyClear notification is generated when the active CPM's management Ethernet port goes operationally up and the management Ethernet port reverts from the standby CPM to the active CPM.

Effect

The management of the node is operating from the active CPM's management Ethernet port and is redundant.

Recovery

No recovery required.

Application name

CHASSIS

Event ID

2136

Event name

tmnxEqMgmtEthRedStandbyRaise

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.121

Default severity

minor

Source stream

main

Message format string

The standby CPM's management Ethernet port $tmnxChassisNotifyMgmtEthRedPort$ is serving as the system's management Ethernet port.

Cause

The tmnxEqMgmtEthRedStandbyRaise notification is generated when the active CPM's management Ethernet port goes operationally down and the standby CPM's management Ethernet port is operationally up and now serving as the system's management Ethernet port.

Effect

The management Ethernet port is no longer redundant. The node can be managed via the standby CPM's management Ethernet port only.

Recovery

Bring the active CPM's management Ethernet port operationally up.

Application name

CHASSIS

Event ID

2055

Event name

tmnxEqOperStateChange

SNMP notification prefix and OID

TIMETRA-SYSTEM-MIB.tmnxSysNotifications.85

Default severity

major

Source stream

main

Message format string

$tmnxNotifyObjectName$ changed operational state: $tmnxNotifyRowOperState$

Cause

The tmnxEqOperStateChange notification is generated when a change occurred in the operational state on the piece of hardware.

Effect

If the state has changed to out of service, then all ports and services associated with the module change to out of service and traffic is impacted.

Recovery

Investigation is required to determine the cause of the change.

Application name

CHASSIS

Event ID

2148

Event name

tmnxEqPhysChassisFanFailure

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.135

Default severity

critical

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ fan $tmnxPhysChassisFanIndex$ failure

Cause

The tmnxEqPhysChassisFanFailure notification is generated when one of the fans in a fan tray fails on a particular physical chassis.

Effect

The fan is no longer operational.

Recovery

Insert a new fan.

Application name

CHASSIS

Event ID

2149

Event name

tmnxEqPhysChassisFanFailureClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.136

Default severity

cleared

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ fan $tmnxPhysChassisFanIndex$ failure cleared

Cause

The tmnxEqPhysChassisFanFailureClear notification is generated when the fan failure is cleared on the particular physical chassis.

Effect

The fan is operational again.

Recovery

There is no recovery for this notification.

Application name

CHASSIS

Event ID

2140

Event name

tmnxEqPhysChassPowerSupAcFail

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.127

Default severity

critical

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ power supply $tmnxPhysChassPowerSupId$ AC failure

Cause

The tmnxEqPhysChassPowerSupAcFail notification is generated when an AC failure occurs on the power supply.

Effect

The power supply is no longer operational.

Recovery

Insert a new power supply.

Application name

CHASSIS

Event ID

2141

Event name

tmnxEqPhysChassPowerSupAcFailClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.128

Default severity

cleared

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ power supply $tmnxPhysChassPowerSupId$ AC failure cleared

Cause

The tmnxEqPhysChassPowerSupAcFailClr notification is generated when the AC failure is cleared on the power supply.

Effect

The power supply is operational again.

Recovery

There is no recovery for this notification.

Application name

CHASSIS

Event ID

2142

Event name

tmnxEqPhysChassPowerSupDcFail

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.129

Default severity

critical

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ power supply $tmnxPhysChassPowerSupId$ DC failure

Cause

The tmnxEqPhysChassPowerSupDcFail notification is generated when a DC failure occurs on the power supply.

Effect

The power supply is no longer operational.

Recovery

Insert a new power supply.

Application name

CHASSIS

Event ID

2143

Event name

tmnxEqPhysChassPowerSupDcFailClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.130

Default severity

cleared

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ power supply $tmnxPhysChassPowerSupId$ DC failure cleared

Cause

The tmnxEqPhysChassPowerSupDcFailClr notification is generated when the DC failure is cleared on the power supply.

Effect

The power supply is operational again.

Recovery

There is no recovery for this notification.

Application name

CHASSIS

Event ID

2144

Event name

tmnxEqPhysChassPowerSupInFail

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.131

Default severity

critical

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ power supply $tmnxPhysChassPowerSupId$ input failure

Cause

The tmnxEqPhysChassPowerSupInFail notification is generated when an input failure occurs on the power supply.

Effect

The power supply is no longer operational.

Recovery

Check input feed and/or insert a new power supply.

Application name

CHASSIS

Event ID

2145

Event name

tmnxEqPhysChassPowerSupInFailClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.132

Default severity

cleared

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ power supply $tmnxPhysChassPowerSupId$ input failure cleared

Cause

The tmnxEqPhysChassPowerSupInFailClr notification is generated when the input failure is cleared on the power supply.

Effect

The power supply is operational again.

Recovery

There is no recovery for this notification.

Application name

CHASSIS

Event ID

2146

Event name

tmnxEqPhysChassPowerSupOutFail

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.133

Default severity

critical

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ power supply $tmnxPhysChassPowerSupId$ output failure

Cause

The tmnxEqPhysChassPowerSupOutFail notification is generated when an output failure occurs on the power supply.

Effect

The power supply is no longer operational.

Recovery

Insert a new power supply.

Application name

CHASSIS

Event ID

2147

Event name

tmnxEqPhysChassPowerSupOutFailCl

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.134

Default severity

cleared

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ power supply $tmnxPhysChassPowerSupId$ output failure cleared

Cause

The tmnxEqPhysChassPowerSupOutFailCl notification is generated when an output failure is cleared on the power supply.

Effect

The power supply is operational again.

Recovery

There is no recovery for this notification.

Application name

CHASSIS

Event ID

2138

Event name

tmnxEqPhysChassPowerSupOvrTmp

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.125

Default severity

critical

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ power supply $tmnxPhysChassPowerSupId$ over temperature

Cause

The tmnxEqPhysChassPowerSupOvrTmp notification is generated when a power supply's temperature surpasses the threshold of the particular physical chassis.

Effect

The power supply is no longer operational.

Recovery

Check input feed and/or insert a new power supply.

Application name

CHASSIS

Event ID

2139

Event name

tmnxEqPhysChassPowerSupOvrTmpClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.126

Default severity

cleared

Source stream

main

Message format string

Chassis $tmnxPhysChassisNum$ power supply $tmnxPhysChassPowerSupId$ over temperature cleared

Cause

The tmnxEqPhysChassPowerSupOvrTmpClr notification is generated when a power supply's temperature is reduced below the threshold of the particular physical chassis.

Effect

The power supply is operational again.

Recovery

There is no recovery for this notification.

Application name

CHASSIS

Event ID

2092

Event name

tmnxEqPowerCapacityExceeded

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.80

Default severity

minor

Source stream

main

Message format string

The system has reached maximum power capacity $tmnxChassisNotifyPowerCapacity$ watts

Cause

The tmnxEqPowerCapacityExceeded alarm is generated when a device needs power to boot, but there is not enough power capacity to support the device.

Effect

A non-powered device will not boot until the power capacity is increased to support the device.

Recovery

Add a new power supply to the system or change the faulty power supply for a working one.

Application name

CHASSIS

Event ID

2093

Event name

tmnxEqPowerCapacityExceededClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.81

Default severity

minor

Source stream

main

Message format string

The system power capacity is sufficient to support installed devices

Cause

The tmnxEqPowerCapacityExceededClear notification is generated when the available power capacity exceeds the required power to boot all inserted devices.

Effect

Devices that failed to boot due to power constrains, power up.

Recovery

N/A

Application name

CHASSIS

Event ID

2094

Event name

tmnxEqPowerLostCapacity

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.82

Default severity

major

Source stream

main

Message format string

The system can no longer support configured devices. Power capacity dropped to $tmnxChassisNotifyPowerCapacity$ watts

Cause

The tmnxEqPowerLostCapacity alarm is generated when a power supply fails or is removed which puts the system in an overloaded situation.

Effect

Devices are powered off in order of lowest power priority (tmnxMDAHwPowerPriority) until the available power capacity can support the powered devices.

Recovery

Add a new power supply to the system or change the faulty power supply for a working one.

Application name

CHASSIS

Event ID

2095

Event name

tmnxEqPowerLostCapacityClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.83

Default severity

major

Source stream

main

Message format string

The system has reached a sustainable power capacity.

Cause

The tmnxEqPowerLostCapacityClear notification is generated when the available power capacity exceeds the required power to boot all inserted devices.

Effect

Devices that powered off due to power constrains, power up.

Recovery

N/A

Application name

CHASSIS

Event ID

2096

Event name

tmnxEqPowerOverloadState

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.84

Default severity

critical

Source stream

main

Message format string

The system has reached critical power capacity. Increase available power now.

Cause

The tmnxEqPowerOverloadState alarm is generated when the overloaded power capacity cannot support the power requirements and there are no further devices that can be powered off.

Effect

The system runs a risk of experiencing brownouts while the available power capacity does not meet the required power consumption.

Recovery

Add power capacity or manually shut down devices until the power capacity meets the power needs.

Application name

CHASSIS

Event ID

2097

Event name

tmnxEqPowerOverloadStateClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.85

Default severity

critical

Source stream

main

Message format string

The system has reached a sustainable power capacity for critical equipment.

Cause

The tmnxEqPowerOverloadStateClear notification is generated when the available power capacity meets or exceeds the power needs of the powered on devices.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2107

Event name

tmnxEqPowerSafetyAlertClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.94

Default severity

minor

Source stream

main

Message format string

Possible messages:

• The system power capacity safety alert for zone $tmnxChassisPwrMgmtZone$ has been disabled.

• The system power capacity for zone $tmnxChassisPwrMgmtZone$ meets or exceeds the configured safety alert threshold of $tmnxChassisPwrMgmtSafetyAlert$ watts.

Cause

The tmnxEqPowerSafetyAlertClear notification is generated when the system power capacity raises above the configured safety alert threshold.

Effect

This event is for notification only.

Recovery

N/A

Application name

CHASSIS

Event ID

2106

Event name

tmnxEqPowerSafetyAlertThreshold

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.93

Default severity

minor

Source stream

main

Message format string

The system power capacity for zone $tmnxChassisPwrMgmtZone$ dropped below the configured safety alert threshold of $tmnxChassisPwrMgmtSafetyAlert$ watts.

Cause

The tmnxEqPowerSafetyAlertThreshold notification is generated when the system power capacity drops below the configured safety alert threshold.

Effect

This event is for notification only.

Recovery

N/A

Application name

CHASSIS

Event ID

2109

Event name

tmnxEqPowerSafetyLevelClear

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.96

Default severity

minor

Source stream

main

Message format string

The peak nodal power for zone $tmnxChassisPwrMgmtZone$ consumption dropped below the configured safety level threshold of $tmnxChassisPwrMgmtSafetyLevel$ percent

Cause

The tmnxEqPowerSafetyLevelClear notification is generated when the peak nodal power consumption drops below the configured safety level threshold.

Effect

This event is for notification only.

Recovery

N/A

Application name

CHASSIS

Event ID

2108

Event name

tmnxEqPowerSafetyLevelThreshold

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.95

Default severity

minor

Source stream

main

Message format string

The peak nodal power for zone $tmnxChassisPwrMgmtZone$ consumption exceeded the configured safety level threshold of $tmnxChassisPwrMgmtSafetyLevel$ percent

Cause

The tmnxEqPowerSafetyLevelThreshold notification is generated when the peak nodal power consumption exceeds the configured safety level threshold.

Effect

This event is for notification only.

Recovery

N/A

Application name

CHASSIS

Event ID

2010

Event name

tmnxEqPowerSupplyInserted

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.4

Default severity

major

Source stream

main

Message format string

$tmnxChassisNotifyHwIndex$ inserted

Cause

Generated when one of the chassis' power supplies is inserted.

Effect

N/A

Recovery

N/A

Application name

CHASSIS

Event ID

2011

Event name

tmnxEqPowerSupplyRemoved

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.5

Default severity

major

Source stream

main

Message format string

$tmnxChassisNotifyHwIndex$, power lost

Cause

The tmnxEqPowerSupplyRemoved notification is generated when one of the power supplies is removed from the chassis or low input voltage is detected. The operating voltage range for the 7750 SR-7 and 7750 SR-12 is -40 to -72 VDC. The notification is generated if the system detects that the voltage of the power supply has dropped to -42.5 VDC.

Effect

Reduced power can cause intermittent errors and could also cause permanent damage to components.

Recovery

Reinsert the power supply or raise the input voltage above -42.5 VDC.

Application name

CHASSIS

Event ID

2115

Event name

tmnxEqProvPowerCapacityAlm

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.102

Default severity

minor

Source stream

main

Message format string

The provisioned power capacity can no longer support configured devices.

Cause

The tmnxEqProvPowerCapacityAlm notification is generated if a power zone's provisioned power capacity can no longer support configured devices.

Effect

There is an increased risk of device power outages that may be service affecting.

Recovery

Increase the provisioned power capacity.

Application name

CHASSIS

Event ID

2116

Event name

tmnxEqProvPowerCapacityAlmClr

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.103

Default severity

minor

Source stream

main

Message format string

The provisioned power capacity now supports configured devices.

Cause

The tmnxEqProvPowerCapacityAlmClr notification is generated when the power zone's provisioned power capacity can support configured devices.

Effect

All configured devices in the power zone have enough provisioned power capacity.

Recovery

N/A

Application name

CHASSIS

Event ID

2073

Event name

tmnxEqSyncIfTimingBITS2Alarm

SNMP notification prefix and OID

TIMETRA-CHASSIS-MIB.tmnxChassisNotification.61

Default severity

minor

Source stream

main

Message format string

Synchronous Timing interface, alarm $tmnxSyncIfTimingNotifyAlarm$ on BITS 2 reference

Cause

Generated when an alarm condition on the BITS 2 timing reference is detected. This notification will have the same indices as those of the tmnxCpmCardTable.

Effect

N/A

Recovery

N/A