Procedures for device discovery


To enable SNMPv3 management of a device

To enable SNMPv3 management and discover an 1830 VWM device

To configure the AIM mediation and discovery for management of the VSR-I

To enable or disable SNMP streaming on an NE

To verify that SSH2 is enabled on a device

To enable SSH host key persistence on a device

To configure device mediation

To assign an event notification policy to an NE

To configure a management network

To configure an additional management interface on a main server

To configure an additional management interface on an auxiliary server

To configure a post-discovery action

To configure a discovery rule

To enable, disable, or delete a discovery rule

To view the post-discovery action execution status

To manage a post-discovery action failure on an NE

To manage, suspend, or unmanage a device

To associate a device with a discovery rule

To change from SNMPv2 to SNMPv3 management of a device

To switch from non-secure to secure mediation

To specify which management address the NFM-P uses to remanage a device

To rescan the network for a device according to a discovery rule

To partially or fully resynchronize NEs with the NFM-P database

To manually accept a mismatched SSH host key

To view the SSH2 host keys to identify active and mismatched keys

To list and save SNMP MIB information

To delete a device from the managed network