a Commands
aaa
aaa
Syntax
aaa
Context
[Tree] (clear aaa)
Full Context
clear aaa
Description
Commands in this context clear authentication, authorization, and accounting data.
Platforms
7705 SAR Gen 2
aaa
Syntax
aaa
Context
[Tree] (show aaa)
Full Context
show aaa
Description
Commands in this context display authentication, authorization, and accounting data.
Platforms
7705 SAR Gen 2
abort-startup-wait
abort-startup-wait
Syntax
abort-startup-wait
Context
[Tree] (tools>perform>router>dhcp6>server>failover abort-startup-wait)
[Tree] (tools>perform>router>dhcp>server>pool>failover abort-startup-wait)
[Tree] (tools>perform>router>dhcp>server>failover abort-startup-wait)
[Tree] (tools>perform>router>dhcp6>server>pool>failover abort-startup-wait)
Full Context
tools perform router dhcp6 local-dhcp-server failover abort-startup-wait
tools perform router dhcp local-dhcp-server pool failover abort-startup-wait
tools perform router dhcp local-dhcp-server failover abort-startup-wait
tools perform router dhcp6 local-dhcp-server pool failover abort-startup-wait
Description
This command aborts the running start-up-wait time, forcing the DCHP server to transition immediately to the COMMUNICATIONS-INTERRUPTED state.
The start-up-wait time is started after a boot to enable two redundant routers to synchronize the DHCP server lease database before transitioning to the (PRE-)NORMAL state when the last state record from the peer is synchronized. If the last state record is not received before the start-up-wait time expires, it is assumed that the remote DHCP server is not operational and the DHCP server goes in COMMUNICATIONS-INTERRUPTED state.
Platforms
7705 SAR Gen 2
access-group
access-group
Syntax
access-group [group-name]
Context
[Tree] (show>system>security access-group)
Full Context
show system security access-group
Description
This command displays SNMP access group information.
Parameters
- group-name
-
This command displays information for the specified access group.
Platforms
7705 SAR Gen 2
Output
The following output is an example of access group information.
Output fields: system security access group describes security access group output fields.
Output ExampleA:ALA-4# show system security access-group
===============================================================================
Access Groups
===============================================================================
group name security security read write notify
model level view view view
-------------------------------------------------------------------------------
snmp-ro snmpv1 none no-security no-security
snmp-ro snmpv2c none no-security no-security
snmp-rw snmpv1 none no-security no-security no-security
snmp-rw snmpv2c none no-security no-security no-security
snmp-rwa snmpv1 none iso iso iso
snmp-rwa snmpv2c none iso iso iso
snmp-trap snmpv1 none iso
snmp-trap snmpv2c none iso
===============================================================================
A:ALA-7#
|
Label |
Description |
|---|---|
|
Group name |
The access group name. |
|
Security model |
The security model required to access the views configured in this node. |
|
Security level |
Specifies the required authentication and privacy levels to access the views configured in this node. |
|
Read view |
Specifies the variable of the view to read the MIB objects. |
|
Write view |
Specifies the variable of the view to configure the contents of the agent. |
|
Notify view |
Specifies the variable of the view to send a trap about MIB objects. |
access-group
Syntax
access-group group-name
Context
[Tree] (show>system>security access-group)
Full Context
show system security access-group
Description
This command displays access-group information.
Platforms
7705 SAR Gen 2
Output
The following output is an example of access group information.
Output fields: system security access group describes the access-group output fields.
Output ExampleA:ALA-1# show system security access-group
===============================================================================
Access Groups
===============================================================================
group name security security read write notify
model level view view view
-------------------------------------------------------------------------------
snmp-ro snmpv1 none no-security no-security
snmp-ro snmpv2c none no-security no-security
snmp-rw snmpv1 none no-security no-security no-security
snmp-rw snmpv2c none no-security no-security no-security
snmp-rwa snmpv1 none iso iso iso
snmp-rwa snmpv2c none iso iso iso
snmp-trap snmpv1 none iso
snmp-trap snmpv2c none iso
-------------------------------------------------------------------------------
No. of Access Groups: 8
===============================================================================
A:ALA-1#
A:ALA-1# show system security access-group detail
===============================================================================
Access Groups
===============================================================================
group name security security read write notify
model level view view view
-------------------------------------------------------------------------------
snmp-ro snmpv1 none no-security no-security
-------------------------------------------------------------------------------
No. of Access Groups:
...
===============================================================================
A:ALA-1#
|
Label |
Description |
|---|---|
|
Group name |
The access group name. |
|
Security model |
The security model required to access the views configured in this node. |
|
Security level |
Specifies the required authentication and privacy levels to access the views configured in this node. |
|
Read view |
Specifies the view to read the MIB objects. |
|
Write view |
Specifies the view to configure the contents of the agent. |
|
Notify view |
Specifies the view to send a trap about MIB objects. |
|
No. of access groups |
The total number of configured access groups. |
accounting-policy
accounting-policy
Syntax
accounting-policy [acct-policy-id] [access | network] [associations]
Context
[Tree] (show>log accounting-policy)
Full Context
show log accounting-policy
Description
This command displays accounting policy information.
Parameters
- policy-id
-
Specifies the policy ID that uniquely identifies the accounting policy, expressed as a decimal integer.
- access
-
Specifies to only display access accounting policies.
- network
-
Specifies to only display network accounting policies.
- association
-
Displays accounting-policy associations.
Platforms
7705 SAR Gen 2
Output
The following output is an example of accounting policy information.
Output fields: accounting policy describes accounting policy output fields.
Output ExampleA:ALA-1# show log accounting-policy
==============================================================================
Accounting Policies
==============================================================================
Policy Type Def Admin Oper Intvl File Record Name
Id State State Id
------------------------------------------------------------------------------
1 network No Up Up 15 1 network-ingress-packets
2 network Yes Up Up 15 2 network-ingress-octets
10 access Yes Up Up 5 3 complete-service-ingress-egress
==============================================================================
A:ALA-1#
A:ALA-1# show log accounting-policy 10
==============================================================================
Accounting Policies
==============================================================================
Policy Type Def Admin Oper Intvl File Record Name
Id State State Id
------------------------------------------------------------------------------
10 access Yes Up Up 5 3 complete-service-ingress-egress
Description : (Not Specified)
This policy is applied to:
Svc Id: 100 SAP : 1/1/8:0 Collect-Stats
Svc Id: 101 SAP : 1/1/8:1 Collect-Stats
Svc Id: 102 SAP : 1/1/8:2 Collect-Stats
Svc Id: 103 SAP : 1/1/8:3 Collect-Stats
Svc Id: 104 SAP : 1/1/8:4 Collect-Stats
Svc Id: 105 SAP : 1/1/8:5 Collect-Stats
Svc Id: 106 SAP : 1/1/8:6 Collect-Stats
Svc Id: 107 SAP : 1/1/8:7 Collect-Stats
Svc Id: 108 SAP : 1/1/8:8 Collect-Stats
Svc Id: 109 SAP : 1/1/8:9 Collect-Stats
...
==============================================================================
A:ALA-1#
A:ALA-1# show log accounting-policy network
==============================================================================
Accounting Policies
==============================================================================
Policy Type Def Admin Oper Intvl File Record Name
Id State State Id
------------------------------------------------------------------------------
1 network No Up Up 15 1 network-ingress-packets
2 network Yes Up Up 15 2 network-ingress-octets
==============================================================================
A:ALA-1#
A:ALA-1# show log accounting-policy access
==============================================================================
Accounting Policies
==============================================================================
Policy Type Def Admin Oper Intvl File Record Name
Id State State Id
------------------------------------------------------------------------------
10 access Yes Up Up 5 3 complete-service-ingress
==============================================================================
A:ALA-1#
|
Label |
Description |
|---|---|
|
Policy ID |
The identifying value assigned to a specific policy. |
|
Type |
Identifies accounting record type forwarded to the configured accounting file. access — Indicates that the policy is an access accounting policy. network — Indicates that the policy is a network accounting policy. none — Indicates no accounting record types assigned. |
|
Def |
Yes — Indicates that the policy is a default access or network policy. No — Indicates that the policy is not a default access or network policy. |
|
Admin State |
Displays the administrative state of the policy. Up — Indicates that the policy is administratively enabled. Down — Indicates that the policy is administratively disabled. |
|
Oper State |
Displays the operational state of the policy. Up — Indicates that the policy is operationally up. Down — Indicates that the policy is operationally down. |
|
Intvl |
Displays the interval, in minutes, in which statistics are collected and written to their destination. The default depends on the record name type. |
|
File ID |
The log destination. |
|
Record Name |
The accounting record name which represents the configured record type. |
|
This policy is applied to |
Specifies the entity where the accounting policy is applied. |
accounting-records
accounting-records
Syntax
accounting-records
Context
[Tree] (show>log accounting-records)
Full Context
show log accounting-records
Description
This command displays accounting policy record names.
Platforms
7705 SAR Gen 2
Output
The following output is an example of accounting records output information.
Output fields: accounting records describes accounting records output fields.
|
Label |
Description |
|---|---|
|
Record # |
The record ID that uniquely identifies the accounting policy, expressed as a decimal integer. |
|
Record Name |
The accounting record name. |
|
Def. Interval |
The default interval, in minutes, in which statistics are collected and written to their destination. |
# show log accounting-records
===========================================================
Accounting Policy Records
===========================================================
Record # Record Name Def. Interval
-----------------------------------------------------------
1 service-ingress-octets 5
2 service-egress-octets 5
3 service-ingress-packets 5
4 service-egress-packets 5
5 network-ingress-octets 15
6 network-egress-octets 15
7 network-ingress-packets 15
8 network-egress-packets 15
9 compact-service-ingress-octets 5
10 combined-service-ingress 5
11 combined-network-ing-egr-octets 15
12 combined-service-ing-egr-octets 5
13 complete-service-ingress-egress 5
14 combined-sdp-ingress-egress 5
15 complete-sdp-ingress-egress 5
16 complete-subscriber-ingress-egress 5
17 aa-protocol 15
18 aa-application 15
19 aa-app-group 15
20 aa-subscriber-protocol 15
21 aa-subscriber-application 15
23 custom-record-subscriber 5
24 custom-record-service 5
25 custom-record-aa-sub 15
26 queue-group-octets 15
27 queue-group-packets 15
28 combined-queue-group 15
29 combined-mpls-lsp-ingress 5
30 combined-mpls-lsp-egress 5
31 combined-ldp-lsp-egress 5
32 saa 5
33 video 10
34 kpi-system 5
35 kpi-bearer-mgmt 5
36 kpi-bearer-traffic 5
37 kpi-ref-point 5
38 kpi-path-mgmt 5
39 kci-iom-3 5
40 kci-system 5
41 kci-bearer-mgmt 5
42 kci-path-mgmt 5
43 complete-kpi 5
44 complete-kci 5
45 kpi-bearer-group 5
46 kpi-ref-path-group 5
47 kpi-kci-bearer-mgmt 5
48 kpi-kci-path-mgmt 5
49 kpi-kci-system 5
50 complete-kpi-kci 5
51 aa-performance 15
52 complete-ethernet-port 15
53 extended-service-ingress-egress 5
54 complete-network-ing-egr 15
55 aa-partition 15
56 complete-pm 5
63 aa-admit-deny 15
0 nat-binding-port-block 0
65 network-interface-ingress-octets 15
66 network-interface-egress-octets 15
67 network-interface-ingress-packets 15
68 network-interface-egress-packets 15
69 combined-network-interface-ingress 15
70 combined-network-interface-egress 15
71 complete-network-interface-ing-egr 15
72 access-egress-octets 15
73 access-egress-packets 15
74 combined-access-egress 15
75 combined-network-egress 15
76 complete-service-activation-test 5
77 combined-mpls-srte-egress 5
===========================================================
Default collection interval for accounting records lists the accounting record names available and the default collection interval.
|
Record Type |
Accounting Record Name |
Default Interval |
|---|---|---|
|
1 |
service-ingress-octets |
5 |
|
2 |
service-egress-octets |
5 |
|
3 |
service-ingress-packets |
5 |
|
4 |
service-egress-packets |
5 |
|
5 |
network-ingress-octets |
15 |
|
6 |
network-egress-octets |
15 |
|
7 |
network-ingress-packets |
15 |
|
8 |
network-egress-packets |
15 |
|
9 |
compact-service-ingress-octets |
5 |
|
10 |
combined-service-ingress |
5 |
|
11 |
combined-network-ing-egr-octets |
15 |
|
12 |
combined-service-ing-egr-octets |
5 |
|
13 |
complete-service-ingress-egress |
5 |
|
14 |
combined-sdp-ingress-egress |
5 |
|
15 |
complete-sdp-ingress-egress |
5 |
|
16 |
complete-subscriber-ingress-egress |
5 |
|
17 |
aa-protocol |
15 |
|
18 |
aa-application |
15 |
|
19 |
aa-app-group |
15 |
|
20 |
aa-subscriber-protocol |
15 |
|
21 |
aa-subscriber-application |
15 |
|
23 |
custom-record-subscriber |
5 |
|
24 |
custom-record-service |
5 |
|
25 |
custom-record-aa-sub |
15 |
|
26 |
queue-group-octets |
15 |
|
27 |
queue-group-packets |
15 |
|
28 |
combined-queue-group |
15 |
|
29 |
combined-mpls-lsp-ingress |
5 |
|
30 |
combined-mpls-lsp-egress |
5 |
|
31 |
combined-ldp-lsp-egress |
5 |
|
32 |
saa |
5 |
|
33 |
video |
10 |
|
34 |
kpi-system |
5 |
|
35 |
kpi-bearer-mgmt |
5 |
|
36 |
kpi-bearer-traffic |
5 |
|
37 |
kpi-ref-point |
5 |
|
38 |
kpi-path-mgmt |
5 |
|
39 |
kci-iom-3 |
5 |
|
40 |
kci-system |
5 |
|
41 |
kci-bearer-mgmt |
5 |
|
42 |
kci-path-mgmt |
5 |
|
43 |
complete-kpi |
5 |
|
44 |
complete-kci |
5 |
|
45 |
kpi-bearer-group |
5 |
|
46 |
kpi-ref-path-group |
5 |
|
47 |
kpi-kci-bearer-mgmt |
5 |
|
48 |
kpi-kci-path-mgmt |
5 |
|
49 |
kpi-kci-system |
5 |
|
50 |
complete-kpi-kci |
5 |
|
51 |
aa-performance |
15 |
|
52 |
complete-ethernet-port |
15 |
|
53 |
extended-service-ingress-egress |
5 |
|
54 |
complete-network-ing-egr |
15 |
|
55 |
aa-partition |
15 |
|
56 |
complete-pm |
5 |
|
63 |
aa-admit-deny |
15 |
|
0 |
nat-binding-port-block |
0 |
|
65 |
network-interface-ingress-octets |
15 |
|
66 |
network-interface-egress-octets |
15 |
|
67 |
network-interface-ingress-packets |
15 |
|
68 |
network-interface-egress-packets |
15 |
|
69 |
combined-network-interface-ingress |
15 |
|
70 |
combined-network-interface-egress |
15 |
|
71 |
complete-network-interface-ing-egr |
15 |
|
72 |
access-egress-octets |
15 |
|
73 |
access-egress-packets |
15 |
|
74 |
combined-access-egress |
15 |
|
75 |
combined-network-egress |
15 |
|
76 |
complete-service-activation-test |
5 |
|
77 |
combined-mpls-srte-egress |
5 |
activate-best-dest
activate-best-dest
Syntax
activate-best-dest
Context
[Tree] (tools>perform>filter>redirect-policy activate-best-dest)
Full Context
tools perform filter redirect-policy activate-best-dest
Description
This command allows the operator to force a PBR switch to the best destination selected by the redirect policy when that destination is not currently active as result of sticky destination functionality being enabled for the specified redirect policy. If hold-time-up is running, the timer is also expired.
Platforms
7705 SAR Gen 2
activate-primary-action
activate-primary-action
Syntax
activate-primary-action
Context
[Tree] (tools>perform>filter>ipv6-filter>entry activate-primary-action)
[Tree] (tools>perform>filter>ip-filter>entry activate-primary-action)
Full Context
tools perform filter ipv6-filter entry activate-primary-action
tools perform filter ip-filter entry activate-primary-action
Description
This command allows an operator to activate the primary action for the given filter policy entry. If the primary action is already active, the command has no effect. If a secondary action is active, the primary action will be activated unless the primary target is down. If the sticky destination timer is running for the primary action entry, it will expire.
Platforms
7705 SAR Gen 2
active
active
Syntax
active egress-lsp [tunnel-id]
active detail [family] [egress-if port-id]
active detail [family] [egress-lsp tunnel-id]
active detail [egress-nh ip-address] [family]
active egress-if port-id [summary | detail] [ family]
active egress-lsp tunnel-id [summary | detail] [family]
active egress-nh [family] [summary | detail] ip-address
active ipv4 [summary | detail] [ egress-if port-id]
active ipv4 [summary | detail] [ egress-lsp tunnel-id]
active ipv4 [summary | detail] [ egress-nh ip-address]
active ipv6 [summary | detail] [egress-if port-id]
active ipv6 [summary | detail] [ egress-nh ip-address]
active ipv6 [summary | detail] [ egress-lsp tunnel-id]
active p2mp p2mp-id identifier root ip-address [summary | detail] [ egress-if port-id]
active p2mp p2mp-id identifier root ip-address [ summary | detail] [egress-lsp tunnel-id]
active p2mp p2mp-id identifier root ip-address [summary | detail] [egress-nh ip-address]
active p2mp p2mp-id identifier root ip-address [rd rd] [ summary | detail] [egress-if port-id] inner-root ip-address
active p2mp p2mp-id identifier root ip-address [ rd rd] [summary | detail] [ egress-lsp tunnel-id] inner-root ip-address
active p2mp p2mp-id identifier root ip-address [rd rd] [summary | detail] [egress-nh ip-address] inner-root ip-address
active p2mp [family] [summary | detail] [ egress-if port-id] [opaque-type opaque-type]
active p2mp [family] [summary | detail] [ egress-lsp tunnel-id] [opaque-type opaque-type]
active p2mp [family] [summary | detail] [ egress-nh ip-address] [opaque-type opaque-type]
active p2mp source ip-address group mcast-address root ip-address [summary | detail] [ egress-if port-id] inner-root ip-address
active p2mp source ip-address group mcast-address root ip-address [summary | detail] [ egress-lsp tunnel-id] inner-root ip-address
active p2mp source ip-address group mcast-address root ip-address [summary | detail] [ egress-nh ip-address] inner-root ip-address
active p2mp source ip-address group mcast-address root ip-address [rd rd] [ summary | detail] [egress-if port-id]
active p2mp source ip-address group mcast-address root ip-address [rd rd] [ summary | detail] [egress-lsp tunnel-id]
active p2mp source ip-address group mcast-address root ip-address [rd rd] [ summary | detail] [egress-nh ip-address]
active p2mp source ip-address group mcast-address root ip-address [rd rd] [ summary | detail] [innermost-root ip-address]
active prefixes [family] [summary | detail] [ egress-if port-id] [community community]
active prefixes [family] [summary | detail] [ egress-lsp tunnel-id] [community community]
active prefixes [egress-nh ip-address] [ family] [summary | detail] [ community community]
active prefixes prefix ip-prefix/ip-prefix-length [ summary | detail] [egress-if port-id] [community community]
active prefixes prefix ip-prefix/ip-prefix-length [summary | detail] [egress-lsp tunnel-id] [ community community]
active prefixes prefix ip-prefix/ip-prefix-length [egress-nh ip-address] [summary | detail] [ community community]
active summary [family] [egress-if port-id]
active summary [family] [egress-lsp tunnel-id]
active summary [egress-nh ip-address] [family]
Context
[Tree] (show>router>ldp>bindings active)
Full Context
show router ldp bindings active
Description
This command display information about LDP active bindings.
Parameters
- detail
-
Displays detailed information.
- summary
-
Displays information in a summarized format.
- family
-
Displays either IPv4 or IPv6 active LDP information.
- opaque-type opaque-type
-
Specifies the type of a Multi-Point Opaque Value Element.
- egress-lsp tunnel-id
-
Displays LDP active bindings by matching on the egress RSVP-TE LSP tunnel-id for LDP FECs which are tunneled over a RSVP-TE LSP. The tunnel-id for the RSVP-TE LSP can be found in the output of the show router mpls lsp detail command and in the show router tunnel-table command. It is not the path LSP ID shown in the output of the show router mpls lsp path detail command.
- egress-nh ip-address
-
Displays LDP active bindings by matching egress-nh.
- egress-if port-id
-
Displays LDP active bindings by matching egress-if.
- inner-root ip-address
-
Displays recursive FECs whose inner root address matches the specified address.
- innermost-root ip-address
-
Displays recursive FECs whose inner root address matches the specified address and non-recursive FECs that have a root address that matches the specified address.
- p2mp source ip-address
-
Displays LDP active P2MP source bindings.
- p2mp-id identifier
-
Displays LDP active P2MP identifier bindings.
- group mcast-address
-
Displays the P2MP group multicast address bindings.
- root ip-address
-
Displays root IP address information.
- rd rd
-
Displays information for the route distinguisher.
- prefix ip-prefix/ip-prefix-length
-
Specifies information for the specified IP prefix and mask length.
- community
-
The string defining the LDP community assigned to the session. Allowed values are any string up to 32 characters long composed of printable, 7-bit ASCII characters excluding double quotes. If the string contains spaces, use double quotes to delimit the start and end of the string.
Platforms
7705 SAR Gen 2
Output
Output Example*A:Dut-C# show router ldp bindings active
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Label Status:
U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
e - Label ELC
FEC Flags:
LF - Lower FEC, UF - Upper FEC, M - Community Mismatch, BA - ASBR Backup FEC
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
(I) - SR-ISIS Next Hop (O) - SR-OSPF Next Hop
(C) - FEC resolved with class-based-forwarding
===============================================================================
LDP IPv4 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
10.20.1.1/32 Push -- 262143
10.10.2.1 1/1/1
10.20.1.1/32 Swap 262141 262143
10.10.2.1 1/1/1
10.20.1.2/32 Push -- 262143
10.10.12.2 lag-1
10.20.1.2/32 Swap 262140 262143
10.10.12.2 lag-1
10.20.1.3/32 Pop 262143 --
-- --
10.20.1.4/32 Push -- 262143
10.10.11.4 2/1/2
10.20.1.4/32 Swap 262139 262143
10.10.11.4 2/1/2
10.20.1.5/32 Push -- 262143
10.10.5.5 2/1/1
10.20.1.5/32 Swap 262137 262143
10.10.5.5 2/1/1
10.20.1.6/32 Push -- 262137
10.10.11.4 2/1/2
10.20.1.6/32 Swap 262135 262137
10.10.11.4 2/1/2
-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 11
===============================================================================
===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
3ffe::a14:101/128 Push -- 262142
fe80::21 1/1/1
3ffe::a14:101/128 Swap 262136 262142
fe80::21 1/1/1
3ffe::a14:102/128 Push -- 262142
fe80::122 lag-1
3ffe::a14:102/128 Swap 262138 262142
fe80::122 lag-1
3ffe::a14:103/128 Pop 262142 --
-- --
3ffe::a14:104/128 Push -- 262142
fe80::114 2/1/2
3ffe::a14:104/128 Swap 262134 262142
fe80::114 2/1/2
3ffe::a14:105/128 Push -- 262142
fe80::55 2/1/1
3ffe::a14:105/128 Swap 262132 262142
fe80::55 2/1/1
3ffe::a14:106/128 Push -- 262136
fe80::114 2/1/2
3ffe::a14:106/128 Swap 262133 262136
fe80::114 2/1/2
-------------------------------------------------------------------------------
No. of IPv6 Prefix Active Bindings: 11
===============================================================================
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP Generic IPv6 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group RD Op
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group RD Op
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:Dut-C# show router ldp bindings active detail
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
==============================================================================
LDP IPv4 Prefix Bindings (Active)
==============================================================================
-------------------------------------------------------------------------------
Prefix : 10.20.1.1/32
Op : Push
Ing Lbl : -- Egr Lbl : 262143
Egr Int/LspId : 1/1/1
EgrNextHop : 10.10.2.1
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.2.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 10.20.1.1/32
Op : Swap
Ing Lbl : 262141 Egr Lbl : 262143
Egr Int/LspId : 1/1/1
EgrNextHop : 10.10.2.1
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.2.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 10.20.1.2/32
Op : Push
Ing Lbl : -- Egr Lbl : 262143
Egr Int/LspId : lag-1
EgrNextHop : 10.10.12.2
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.12.3
Metric : 333 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 10.20.1.2/32
Op : Swap
Ing Lbl : 262140 Egr Lbl : 262143
Egr Int/LspId : lag-1
EgrNextHop : 10.10.12.2
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.12.3
Metric : 333 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 10.20.1.3/32
Op : Pop
Ing Lbl : 262143 Egr Lbl : --
Egr Int/LspId : --
EgrNextHop : --
Egr. Flags : None Ing. Flags : None
-------------------------------------------------------------------------------
Prefix : 10.20.1.4/32
Op : Push
Ing Lbl : -- Egr Lbl : 262143
Egr Int/LspId : 2/1/2
EgrNextHop : 10.10.11.4
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.11.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 10.20.1.4/32
Op : Swap
Ing Lbl : 262139 Egr Lbl : 262143
Egr Int/LspId : 2/1/2
EgrNextHop : 10.10.11.4
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.11.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 10.20.1.5/32
Op : Push
Ing Lbl : -- Egr Lbl : 262143
Egr Int/LspId : 2/1/1
EgrNextHop : 10.10.5.5
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.5.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 10.20.1.5/32
Op : Swap
Ing Lbl : 262137 Egr Lbl : 262143
Egr Int/LspId : 2/1/1
EgrNextHop : 10.10.5.5
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.5.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 10.20.1.6/32
Op : Push
Ing Lbl : -- Egr Lbl : 262137
Egr Int/LspId : 2/1/2
EgrNextHop : 10.10.11.4
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.11.3
Metric : 2000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 10.20.1.6/32
Op : Swap
Ing Lbl : 262135 Egr Lbl : 262137
Egr Int/LspId : 2/1/2
EgrNextHop : 10.10.11.4
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.11.3
Metric : 2000 Mtu : 1500
===============================================================================
No. of IPv4 Prefix Active Bindings: 11
==============================================================================
==============================================================================
LDP IPv6 Prefix Bindings (Active)
==============================================================================
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:101/128
Op : Push
Ing Lbl : -- Egr Lbl : 262142
Egr Int/LspId : 1/1/1
EgrNextHop : fe80::21
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.2.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:101/128
Op : Swap
Ing Lbl : 262136 Egr Lbl : 262142
Egr Int/LspId : 1/1/1
EgrNextHop : fe80::21
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.2.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:102/128
Op : Push
Ing Lbl : -- Egr Lbl : 262142
Egr Int/LspId : lag-1
EgrNextHop : fe80::122
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.12.3
Metric : 333 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:102/128
Op : Swap
Ing Lbl : 262138 Egr Lbl : 262142
Egr Int/LspId : lag-1
EgrNextHop : fe80::122
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.12.3
Metric : 333 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:103/128
Op : Pop
Ing Lbl : 262142 Egr Lbl : --
Egr Int/LspId : --
EgrNextHop : --
Egr. Flags : None Ing. Flags : None
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:104/128
Op : Push
Ing Lbl : -- Egr Lbl : 262142
Egr Int/LspId : 2/1/2
EgrNextHop : fe80::114
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.11.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:104/128
Op : Swap
Ing Lbl : 262134 Egr Lbl : 262142
Egr Int/LspId : 2/1/2
EgrNextHop : fe80::114
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.11.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:105/128
Op : Push
Ing Lbl : -- Egr Lbl : 262142
Egr Int/LspId : 2/1/1
EgrNextHop : fe80::55
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.5.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:105/128
Op : Swap
Ing Lbl : 262132 Egr Lbl : 262142
Egr Int/LspId : 2/1/1
EgrNextHop : fe80::55
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.5.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:106/128
Op : Push
Ing Lbl : -- Egr Lbl : 262136
Egr Int/LspId : 2/1/2
EgrNextHop : fe80::114
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.11.3
Metric : 2000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:106/128
Op : Swap
Ing Lbl : 262133 Egr Lbl : 262136
Egr Int/LspId : 2/1/2
EgrNextHop : fe80::114
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.11.3
Metric : 2000 Mtu : 1500
===============================================================================
No. of IPv6 Prefix Active Bindings: 11
==============================================================================
==============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
==============================================================================
No Matching Entries Found
==============================================================================
==============================================================================
LDP Generic IPv6 P2MP Bindings (Active)
==============================================================================
No Matching Entries Found
==============================================================================
==============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings (Active)
==============================================================================
No Matching Entries Found
==============================================================================
==============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings (Active)
==============================================================================
No Matching Entries Found
==============================================================================
==============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings (Active)
==============================================================================
No Matching Entries Found
==============================================================================
==============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings (Active)
==============================================================================
No Matching Entries Found
==============================================================================
*A:Dut-C# show router ldp bindings active egress-if 2/1/2
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
===============================================================================
LDP IPv4 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
10.20.1.4/32 Push -- 262143
10.10.11.4 2/1/2
10.20.1.4/32 Swap 262139 262143
10.10.11.4 2/1/2
10.20.1.6/32 Push -- 262137
10.10.11.4 2/1/2
10.20.1.6/32 Swap 262135 262137
10.10.11.4 2/1/2
-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 4
===============================================================================
===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
3ffe::a14:104/128 Push -- 262142
fe80::114 2/1/2
3ffe::a14:104/128 Swap 262134 262142
fe80::114 2/1/2
3ffe::a14:106/128 Push -- 262136
fe80::114 2/1/2
3ffe::a14:106/128 Swap 262133 262136
fe80::114 2/1/2
-------------------------------------------------------------------------------
No. of IPv6 Prefix Active Bindings: 4
===============================================================================
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP Generic IPv6 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group RD Op
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group RD Op
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:Dut-C# show router ldp bindings active egress-nh 10.10.11.4
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
===============================================================================
LDP IPv4 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
10.20.1.4/32 Push -- 262143
10.10.11.4 2/1/2
10.20.1.4/32 Swap 262139 262143
10.10.11.4 2/1/2
10.20.1.6/32 Push -- 262137
10.10.11.4 2/1/2
10.20.1.6/32 Swap 262135 262137
10.10.11.4 2/1/2
-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 4
===============================================================================
===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP Generic IPv6 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group RD Op
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group RD Op
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:Dut-C# show router ldp bindings active ipv4
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
===============================================================================
LDP IPv4 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
10.20.1.1/32 Push -- 262143
10.10.2.1 1/1/1
10.20.1.1/32 Swap 262141 262143
10.10.2.1 1/1/1
10.20.1.2/32 Push -- 262143
10.10.12.2 lag-1
10.20.1.2/32 Swap 262140 262143
10.10.12.2 lag-1
10.20.1.3/32 Pop 262143 --
-- --
10.20.1.4/32 Push -- 262143
10.10.11.4 2/1/2
10.20.1.4/32 Swap 262139 262143
10.10.11.4 2/1/2
10.20.1.5/32 Push -- 262143
10.10.5.5 2/1/1
10.20.1.5/32 Swap 262137 262143
10.10.5.5 2/1/1
10.20.1.6/32 Push -- 262137
10.10.11.4 2/1/2
10.20.1.6/32 Swap 262135 262137
10.10.11.4 2/1/2
-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 11
===============================================================================
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group RD Op
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:Dut-C# show router ldp bindings active ipv6
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
3ffe::a14:101/128 Push -- 262142
fe80::21 1/1/1
3ffe::a14:101/128 Swap 262136 262142
fe80::21 1/1/1
3ffe::a14:102/128 Push -- 262142
fe80::122 lag-1
3ffe::a14:102/128 Swap 262138 262142
fe80::122 lag-1
3ffe::a14:103/128 Pop 262142 --
-- --
3ffe::a14:104/128 Push -- 262142
fe80::114 2/1/2
3ffe::a14:104/128 Swap 262134 262142
fe80::114 2/1/2
3ffe::a14:105/128 Push -- 262142
fe80::55 2/1/1
3ffe::a14:105/128 Swap 262132 262142
fe80::55 2/1/1
3ffe::a14:106/128 Push -- 262136
fe80::114 2/1/2
3ffe::a14:106/128 Swap 262133 262136
fe80::114 2/1/2
-------------------------------------------------------------------------------
No. of IPv6 Prefix Active Bindings: 11
===============================================================================
===============================================================================
LDP Generic IPv6 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group RD Op
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:Dut-C# show router ldp bindings active summary
No. of IPv4 Prefix Active Bindings: 11
No. of IPv6 Prefix Active Bindings: 11
No. of Generic IPv4 P2MP Active Bindings: 0
No. of Generic IPv6 P2MP Active Bindings: 0
No. of In-Band-SSM IPv4 P2MP Active Bindings: 0
No. of In-Band-SSM IPv6 P2MP Active Bindings: 0
No. of In-Band-VPN-SSM IPv4 P2MP Active Bindings: 0
No. of In-Band-VPN-SSM IPv6 P2MP Active Bindings: 0
*A:Dut-C#
*A:Dut-C# show router ldp bindings active prefixes
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
===============================================================================
LDP IPv4 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
10.20.1.1/32 Push -- 262143
10.10.2.1 1/1/1
10.20.1.1/32 Swap 262141 262143
10.10.2.1 1/1/1
10.20.1.2/32 Push -- 262143
10.10.12.2 lag-1
10.20.1.2/32 Swap 262140 262143
10.10.12.2 lag-1
10.20.1.3/32 Pop 262143 --
-- --
10.20.1.4/32 Push -- 262143
10.10.11.4 2/1/2
10.20.1.4/32 Swap 262139 262143
10.10.11.4 2/1/2
10.20.1.5/32 Push -- 262143
10.10.5.5 2/1/1
10.20.1.5/32 Swap 262137 262143
10.10.5.5 2/1/1
10.20.1.6/32 Push -- 262137
10.10.11.4 2/1/2
10.20.1.6/32 Swap 262135 262137
10.10.11.4 2/1/2
-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 11
===============================================================================
===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
3ffe::a14:101/128 Push -- 262142
fe80::21 1/1/1
3ffe::a14:101/128 Swap 262136 262142
fe80::21 1/1/1
3ffe::a14:102/128 Push -- 262142
fe80::122 lag-1
3ffe::a14:102/128 Swap 262138 262142
fe80::122 lag-1
3ffe::a14:103/128 Pop 262142 --
-- --
3ffe::a14:104/128 Push -- 262142
fe80::114 2/1/2
3ffe::a14:104/128 Swap 262134 262142
fe80::114 2/1/2
3ffe::a14:105/128 Push -- 262142
fe80::55 2/1/1
3ffe::a14:105/128 Swap 262132 262142
fe80::55 2/1/1
3ffe::a14:106/128 Push -- 262136
fe80::114 2/1/2
3ffe::a14:106/128 Swap 262133 262136
fe80::114 2/1/2
-------------------------------------------------------------------------------
No. of IPv6 Prefix Active Bindings: 11
===============================================================================
*A:Dut-C#
*A:Dut-C# show router ldp bindings active prefixes ipv4
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
===============================================================================
LDP IPv4 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
10.20.1.1/32 Push -- 262143
10.10.2.1 1/1/1
10.20.1.1/32 Swap 262141 262143
10.10.2.1 1/1/1
10.20.1.2/32 Push -- 262143
10.10.12.2 lag-1
10.20.1.2/32 Swap 262140 262143
10.10.12.2 lag-1
10.20.1.3/32 Pop 262143 --
-- --
10.20.1.4/32 Push -- 262143
10.10.11.4 2/1/2
10.20.1.4/32 Swap 262139 262143
10.10.11.4 2/1/2
10.20.1.5/32 Push -- 262143
10.10.5.5 2/1/1
10.20.1.5/32 Swap 262137 262143
10.10.5.5 2/1/1
10.20.1.6/32 Push -- 262137
10.10.11.4 2/1/2
10.20.1.6/32 Swap 262135 262137
10.10.11.4 2/1/2
-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 11
===============================================================================
*A:Dut-C#
*A:Dut-C# show router ldp bindings active prefixes ipv6
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
3ffe::a14:101/128 Push -- 262142
fe80::21 1/1/1
3ffe::a14:101/128 Swap 262136 262142
fe80::21 1/1/1
3ffe::a14:102/128 Push -- 262142
fe80::122 lag-1
3ffe::a14:102/128 Swap 262138 262142
fe80::122 lag-1
3ffe::a14:103/128 Pop 262142 --
-- --
3ffe::a14:104/128 Push -- 262142
fe80::114 2/1/2
3ffe::a14:104/128 Swap 262134 262142
fe80::114 2/1/2
3ffe::a14:105/128 Push -- 262142
fe80::55 2/1/1
3ffe::a14:105/128 Swap 262132 262142
fe80::55 2/1/1
3ffe::a14:106/128 Push -- 262136
fe80::114 2/1/2
3ffe::a14:106/128 Swap 262133 262136
fe80::114 2/1/2
-------------------------------------------------------------------------------
No. of IPv6 Prefix Active Bindings: 11
===============================================================================
*A:Dut-C#
*A:Dut-C# show router ldp bindings active prefixes prefix 3ffe::a14:101/128 detail
egress-if 1/1/1
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
==============================================================================
LDP IPv6 Prefix Bindings (Active)
==============================================================================
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:101/128
Op : Push
Ing Lbl : -- Egr Lbl : 262142
Egr Int/LspId : 1/1/1
EgrNextHop : fe80::21
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.2.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:101/128
Op : Swap
Ing Lbl : 262136 Egr Lbl : 262142
Egr Int/LspId : 1/1/1
EgrNextHop : fe80::21
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.2.3
Metric : 1000 Mtu : 1500
===============================================================================
No. of IPv6 Prefix Active Bindings: 2
==============================================================================
*A:Dut-C#
*A:Dut-C# show router ldp bindings active prefixes prefix 3ffe::a14:101/128 egress-
nh fe80::21
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
3ffe::a14:101/128 Push -- 262142
fe80::21 1/1/1
3ffe::a14:101/128 Swap 262136 262142
fe80::21 1/1/1
-------------------------------------------------------------------------------
No. of IPv6 Prefix Active Bindings: 2
===============================================================================
*A:Dut-C#
*A:SRU4# show router ldp bindings active p2mp
===============================================================================
LDP Bindings (IPv4 LSR ID 192.168.1.4:0)
(IPv6 LSR ID 3ffe::6e14:104[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
8193 77156
192.168.1.1 Pop 255042 --
-- --
8193 77156
192.168.1.1 Swap 255042 259773
192.168.110.110 3/1/5:1
8193 77156
192.168.1.1 Pop 258780BU --
-- --
8193 77156
192.168.1.1 Swap 258780BU 259773
192.168.110.110 3/1/5:1
8194 77157
192.168.1.1 Pop 255041 --
-- --
8194 77157
192.168.1.1 Swap 255041 259772
192.168.110.110 3/1/5:1
8194 77157
192.168.1.1 Pop 258779BU --
-- --
8194 77157
192.168.1.1 Swap 258779BU 259772
192.168.110.110 3/1/5:1
8195 77158
192.168.1.1 Pop 255040 --
-- --
8195 77158
192.168.1.1 Swap 255040 259769
192.168.110.110 3/1/5:1
8195 77158
192.168.1.1 Pop 258777BU --
-- --
8195 77158
192.168.1.1 Swap 258777BU 259769
*A:SRU4#
The following show output displays recursive FECs.
A:Dut-C# show router ldp bindings active p2mp
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3)
(IPv6 LSR ID ::)
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
LF - Lower FEC, UF - Upper FEC
===============================================================================
LDP Recursive with In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
RootAddr
InnerRootAddr
Source Interface
Group Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
10.4.0.2
10.20.1.6
10.0.101.10 73728
192.168.1.1 Pop 262135 --
-- --
10.4.0.2 (UF)
10.20.1.6
10.0.101.10 73728
192.168.1.1 Swap 262135 Stitched
-- --
10.20.1.3 (LF)
10.20.1.6
10.0.101.10 Unknw
192.168.1.1 Push -- 262139
10.3.0.1 lag-1
10.20.1.3 (LF)
10.20.1.6
10.0.101.10 Unknw
192.168.1.1 Push -- 262139
10.33.0.1 1/1/2:2
-------------------------------------------------------------------------------
No. of In-Band-SSM IPv4 P2MP Active Bindings: 4
===============================================================================
*A:SRU4# show router ldp bindings active p2mp p2mp-id 1 root 192.168.1.2
===============================================================================
LDP Bindings (IPv4 LSR ID 192.168.1.4:0)
(IPv6 LSR ID 3ffe::6e14:104[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
1 73728
192.168.1.2 Pop 253348 --
-- --
1 73728
192.168.1.2 Swap 253348 256245
192.168.58.6 3/2/3:8
1 73728
192.168.1.2 Pop 260103BU --
-- --
1 73728
192.168.1.2 Swap 260103BU 256245
192.168.58.6 3/2/3:8
-------------------------------------------------------------------------------
No. of Generic IPv4 P2MP Active Bindings: 4
===============================================================================
*A:SRU4#
*A:SRU4# show router ldp bindings active p2mp p2mp-id 1 root 192.168.1.2 summary
No. of Generic IPv4 P2MP Active Bindings: 4
*A:SRU4# show router ldp bindings active p2mp p2mp-id 1 root 192.168.1.2 detail
===============================================================================
LDP Bindings (IPv4 LSR ID 192.168.1.4:0)
(IPv6 LSR ID 3ffe::6e14:104[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
==============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
==============================================================================
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 1
Root-Addr : 192.168.1.2
-------------------------------------------------------------------------------
Op : Pop
Ing Lbl : 253348
Egr Lbl : --
Egr Int/LspId : --
EgrNextHop : --
Egr. Flags : None Ing. Flags : None
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 1
Root-Addr : 192.168.1.2
-------------------------------------------------------------------------------
Op : Swap
Ing Lbl : 253348
Egr Lbl : 256245
Egr Int/LspId : 3/2/3:8
EgrNextHop : 192.168.58.6
Egr. Flags : None Ing. Flags : None
Egr If Name : src-1.8
Metric : 1 Mtu : 1500
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 1
Root-Addr : 192.168.1.2
-------------------------------------------------------------------------------
Op : Pop
Ing Lbl : 260103BU
Egr Lbl : --
Egr Int/LspId : --
EgrNextHop : --
Egr. Flags : None Ing. Flags : None
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 1
Root-Addr : 192.168.1.2
-------------------------------------------------------------------------------
Op : Swap
Ing Lbl : 260103BU
Egr Lbl : 256245
Egr Int/LspId : 3/2/3:8
EgrNextHop : 192.168.58.6
Egr. Flags : None Ing. Flags : None
Egr If Name : src-1.8
Metric : 1 Mtu : 1500
===============================================================================
No. of Generic IPv4 P2MP Active Bindings: 4
==============================================================================
*A:SRU4#
*A:SRU4# show router ldp bindings active p2mp p2mp-
id 1 root 192.168.1.2 detail egress-
if 3/2/3:8
===============================================================================
LDP Bindings (IPv4 LSR ID 192.168.1.4:0)
(IPv6 LSR ID 3ffe::6e14:104[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
==============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
==============================================================================
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 1
Root-Addr : 192.168.1.2
-------------------------------------------------------------------------------
Op : Swap
Ing Lbl : 253348
Egr Lbl : 256245
Egr Int/LspId : 3/2/3:8
EgrNextHop : 192.168.58.6
Egr. Flags : None Ing. Flags : None
Egr If Name : src-1.8
Metric : 1 Mtu : 1500
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 1
Root-Addr : 192.168.1.2
-------------------------------------------------------------------------------
Op : Swap
Ing Lbl : 260103BU
Egr Lbl : 256245
Egr Int/LspId : 3/2/3:8
EgrNextHop : 192.168.58.6
Egr. Flags : None Ing. Flags : None
Egr If Name : src-1.8
Metric : 1 Mtu : 1500
===============================================================================
No. of Generic IPv4 P2MP Active Bindings: 2
==============================================================================
*A:SRU4#
*A:SRU4# show router ldp bindings active p2mp p2mp-id 1 root 192.168.1.2 egress-nh
192.168.58.6
===============================================================================
LDP Bindings (IPv4 LSR ID 192.168.1.4:0)
(IPv6 LSR ID 3ffe::6e14:104[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
1 73728
192.168.1.2 Swap 253348 256245
192.168.58.6 3/2/3:8
1 73728
192.168.1.2 Swap 260103BU 256245
192.168.58.6 3/2/3:8
-------------------------------------------------------------------------------
No. of Generic IPv4 P2MP Active Bindings: 2
===============================================================================
*A:SRU4#
*A:SRU4# show router ldp bindings active p2mp ipv4 summary
No. of Generic IPv4 P2MP Active Bindings: 8870
No. of In-Band-SSM IPv4 P2MP Active Bindings: 182
No. of In-Band-VPN-SSM IPv4 P2MP Active Bindings: 0
*A:SRU4#
*A:SRU4# show router ldp bindings active p2mp ipv4 detail
===============================================================================
LDP Bindings (IPv4 LSR ID 192.168.1.4:0)
(IPv6 LSR ID 3ffe::6e14:104[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
==============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
==============================================================================
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 8193
Root-Addr : 192.168.1.1
-------------------------------------------------------------------------------
Op : Pop
Ing Lbl : 255042
Egr Lbl : --
Egr Int/LspId : --
EgrNextHop : --
Egr. Flags : None Ing. Flags : None
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 8193
Root-Addr : 192.168.1.1
-------------------------------------------------------------------------------
Op : Swap
Ing Lbl : 255042
Egr Lbl : 259773
Egr Int/LspId : 3/1/5:1
EgrNextHop : 192.168.110.110
Egr. Flags : None Ing. Flags : None
Egr If Name : sicily1-1:1
Metric : 1 Mtu : 9194
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 8193
Root-Addr : 192.168.1.1
-------------------------------------------------------------------------------
Op : Pop
Ing Lbl : 258780BU
Egr Lbl : --
Egr Int/LspId : --
EgrNextHop : --
Egr. Flags : None Ing. Flags : None
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 8193
Root-Addr : 192.168.1.1
-------------------------------------------------------------------------------
Op : Swap
Ing Lbl : 258780BU
Egr Lbl : 259773
Egr Int/LspId : 3/1/5:1
EgrNextHop : 192.168.110.110
Egr. Flags : None Ing. Flags : None
Egr If Name : sicily1-1:1
Metric : 1 Mtu : 9194
-------------------------------------------------------------------------------
P2MP Type : 1 P2MP-Id : 8194
Root-Addr : 192.168.1.1
-------------------------------------------------------------------------------
Op : Pop
Ing Lbl : 255041
*A:SRU4#
*A:SRU4# show router ldp bindings active p2mp ipv4 egress-if 3/1/5:1
===============================================================================
LDP Bindings (IPv4 LSR ID 192.168.1.4:0)
(IPv6 LSR ID 3ffe::6e14:104[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
8193 77156
192.168.1.1 Swap 255042 259773
192.168.110.110 3/1/5:1
8193 77156
192.168.1.1 Swap 258780BU 259773
192.168.110.110 3/1/5:1
8194 77157
192.168.1.1 Swap 255041 259772
192.168.110.110 3/1/5:1
8194 77157
192.168.1.1 Swap 258779BU 259772
192.168.110.110 3/1/5:1
8195 77158
192.168.1.1 Swap 255040 259769
192.168.110.110 3/1/5:1
8195 77158
192.168.1.1 Swap 258777BU 259769
192.168.110.110 3/1/5:1
8196 77159
192.168.1.1 Swap 255039 259768
192.168.110.110 3/1/5:1
8196 77159
192.168.1.1 Swap 258772BU 259768
192.168.110.110 3/1/5:1
8197 77160
192.168.1.1 Swap 255034 259762
192.168.110.110 3/1/5:1
8197 77160
192.168.1.1 Swap 258758BU 259762
192.168.110.110 3/1/5:1
8198 77161
192.168.1.1 Swap 255033 259761
192.168.110.110 3/1/5:1
8198 77161
192.168.1.1 Swap 258755BU 259761
*A:SRU4#
*A:SRU4# show router ldp bindings active p2mp ipv4 egress-nh 192.168.110.110
===============================================================================
LDP Bindings (IPv4 LSR ID 192.168.1.4:0)
(IPv6 LSR ID 3ffe::6e14:104[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
8193 77156
192.168.1.1 Swap 255042 259773
192.168.110.110 3/1/5:1
8193 77156
192.168.1.1 Swap 258780BU 259773
192.168.110.110 3/1/5:1
8194 77157
192.168.1.1 Swap 255041 259772
192.168.110.110 3/1/5:1
8194 77157
192.168.1.1 Swap 258779BU 259772
192.168.110.110 3/1/5:1
8195 77158
192.168.1.1 Swap 255040 259769
192.168.110.110 3/1/5:1
8195 77158
192.168.1.1 Swap 258777BU 259769
192.168.110.110 3/1/5:1
8196 77159
192.168.1.1 Swap 255039 259768
192.168.110.110 3/1/5:1
8196 77159
192.168.1.1 Swap 258772BU 259768
192.168.110.110 3/1/5:1
8197 77160
192.168.1.1 Swap 255034 259762
192.168.110.110 3/1/5:1
8197 77160
192.168.1.1 Swap 258758BU 259762
192.168.110.110 3/1/5:1
8198 77161
192.168.1.1 Swap 255033 259761
192.168.110.110 3/1/5:1
8198 77161
192.168.1.1 Swap 258755BU 259761
*A:SRU4#
*A:SRU4# show router ldp bindings active p2mp ipv4 egress-if 3/1/5:1 opaque-type
generic
===============================================================================
LDP Bindings (IPv4 LSR ID 192.168.1.4:0)
(IPv6 LSR ID 3ffe::6e14:104[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
8193 77156
192.168.1.1 Swap 255042 259773
192.168.110.110 3/1/5:1
8193 77156
192.168.1.1 Swap 258780BU 259773
192.168.110.110 3/1/5:1
8194 77157
192.168.1.1 Swap 255041 259772
192.168.110.110 3/1/5:1
8194 77157
192.168.1.1 Swap 258779BU 259772
192.168.110.110 3/1/5:1
8195 77158
192.168.1.1 Swap 255040 259769
192.168.110.110 3/1/5:1
8195 77158
192.168.1.1 Swap 258777BU 259769
192.168.110.110 3/1/5:1
8196 77159
192.168.1.1 Swap 255039 259768
192.168.110.110 3/1/5:1
8196 77159
192.168.1.1 Swap 258772BU 259768
192.168.110.110 3/1/5:1
8197 77160
192.168.1.1 Swap 255034 259762
192.168.110.110 3/1/5:1
8197 77160
192.168.1.1 Swap 258758BU 259762
192.168.110.110 3/1/5:1
8198 77161
192.168.1.1 Swap 255033 259761
192.168.110.110 3/1/5:1
8198 77161
192.168.1.1 Swap 258755BU 259761
*A:SRU4#
The following show output displays recursive FECs.
A:Dut-C# show router ldp bindings active p2mp source 10.0.101.10 group 192.168.1.1
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3)
(IPv6 LSR ID ::)
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
LF - Lower FEC, UF - Upper FEC
===============================================================================
LDP Recursive with In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
RootAddr
InnerRootAddr
Source Interface
Group Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
10.4.0.2
10.20.1.6
10.0.101.10 73728
192.168.1.1 Pop 262135 --
-- --
10.4.0.2 (UF)
10.20.1.6
10.0.101.10 73728
192.168.1.1 Swap 262135 Stitched
-- --
10.20.1.3 (LF)
10.20.1.6
10.0.101.10 Unknw
192.168.1.1 Push -- 262139
10.3.0.1 lag-1
10.20.1.3 (LF)
10.20.1.6
10.0.101.10 Unknw
192.168.1.1 Push -- 262139
10.33.0.1 1/1/2:2
-------------------------------------------------------------------------------
No. of In-Band-SSM IPv4 P2MP Active Bindings: 4
===============================================================================
A:Dut-C# show router ldp bindings active p2mp source 10.0.101.10 group 192.168.1.1
innermost-root 10.20.1.6
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3)
(IPv6 LSR ID ::)
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
LF - Lower FEC, UF - Upper FEC
===============================================================================
LDP Recursive with In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
RootAddr
InnerRootAddr
Source Interface
Group Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
10.4.0.2
10.20.1.6
10.0.101.10 73728
192.168.1.1 Pop 262135 --
-- --
10.4.0.2 (UF)
10.20.1.6
10.0.101.10 73728
192.168.1.1 Swap 262135 Stitched
-- --
10.20.1.3 (LF)
10.20.1.6
10.0.101.10 Unknw
192.168.1.1 Push -- 262139
10.3.0.1 lag-1
10.20.1.3 (LF)
10.20.1.6
10.0.101.10 Unknw
192.168.1.1 Push -- 262139
10.33.0.1 1/1/2:2
-------------------------------------------------------------------------------
No. of In-Band-SSM IPv4 P2MP Active Bindings: 4
===============================================================================
A:Dut-C# show router ldp bindings active p2mp source 10.0.101.10 group 192.168.1.1
inner-root 10.20.1.6 root 10.20.1.3
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3)
(IPv6 LSR ID ::)
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
LF - Lower FEC, UF - Upper FEC
===============================================================================
LDP Recursive with In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
RootAddr
InnerRootAddr
Source Interface
Group Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
10.20.1.3 (LF)
10.20.1.6
10.0.101.10 Unknw
192.168.1.1 Push -- 262139
10.3.0.1 lag-1
10.20.1.3 (LF)
10.20.1.6
10.0.101.10 Unknw
192.168.1.1 Push -- 262139
10.33.0.1 1/1/2:2
-------------------------------------------------------------------------------
No. of In-Band-SSM IPv4 P2MP Active Bindings: 2
*A:Dut-C# show router ldp bindings active prefixes prefix 3ffe::a14:101/128
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
3ffe::a14:101/128 Push -- 262142
fe80::21 1/1/1
3ffe::a14:101/128 Swap 262136 262142
fe80::21 1/1/1
-------------------------------------------------------------------------------
No. of IPv6 Prefix Active Bindings: 2
===============================================================================
*A:Dut-C# show router ldp bindings active prefixes prefix 3ffe::a14:101/128 detail
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3:0)
(IPv6 LSR ID 3ffe::a14:103[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
==============================================================================
LDP IPv6 Prefix Bindings (Active)
==============================================================================
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:101/128
Op : Push
Ing Lbl : -- Egr Lbl : 262142
Egr Int/LspId : 1/1/1
EgrNextHop : fe80::21
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.2.3
Metric : 1000 Mtu : 1500
-------------------------------------------------------------------------------
Prefix : 3ffe::a14:101/128
Op : Swap
Ing Lbl : 262136 Egr Lbl : 262142
Egr Int/LspId : 1/1/1
EgrNextHop : fe80::21
Egr. Flags : None Ing. Flags : None
Egr If Name : ip-10.10.2.3
Metric : 1000 Mtu : 1500
===============================================================================
No. of IPv6 Prefix Active Bindings: 2
===============================================================================
*A:Dut-C#
*A:Dut-C>config>router>isis# show router ldp bindings active prefixes prefix
10.20.1.1/32
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3)
(IPv6 LSR ID 3ffe::a14:103)
===============================================================================
Label Status:
U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
e - Label ELC
FEC Flags:
LF - Lower FEC, UF - Upper FEC, BA - ASBR Backup FEC
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
(I) - SR-ISIS Next Hop (O) - SR-OSPF Next Hop
(C) - FEC resolved with class-based-forwarding
===============================================================================
LDP IPv4 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
10.20.1.1/32(I) Swap 262122 474387
10.10.2.1 1/1/1
-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 1
===============================================================================
*A:Dut-C>config>router>isis# show router ldp bindings prefixes prefix 10.20.1.1/32
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3)
(IPv6 LSR ID 3ffe::a14:103)
===============================================================================
Label Status:
U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
e - Label ELC
FEC Flags:
LF - Lower FEC, UF - Upper FEC, BA - ASBR Backup FEC
===============================================================================
LDP IPv4 Prefix Bindings
===============================================================================
Prefix IngLbl EgrLbl
Peer EgrIntf/LspId
EgrNextHop
-------------------------------------------------------------------------------
10.20.1.1/32 262122U 262131
10.20.1.2:0 --
--
10.20.1.1/32 262122U 262140
10.20.1.4:0 --
--
10.20.1.1/32 262122U 262139
10.20.1.5:0 --
--
-------------------------------------------------------------------------------
No. of IPv4 Prefix Bindings: 3
===============================================================================
*A:Dut-C# show router ldp bindings prefixes prefix 10.20.1.6/32
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3)
(IPv6 LSR ID ::)
===============================================================================
Label Status:
U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
e - Label ELC
FEC Flags:
LF - Lower FEC, UF - Upper FEC, BA - ASBR Backup FEC
===============================================================================
LDP IPv4 Prefix Bindings
===============================================================================
Prefix IngLbl EgrLbl
Peer EgrIntf/LspId
EgrNextHop
-------------------------------------------------------------------------------
10.20.1.6/32 262142U 262142
10.20.1.1:0 --
--
10.20.1.6/32 262142U --
10.20.1.2:0 --
--
-------------------------------------------------------------------------------
No. of IPv4 Prefix Bindings: 2
===============================================================================
*A:Dut-C# show router ldp bindings active prefixes prefix 10.20.1.6/32
===============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.3)
(IPv6 LSR ID ::)
===============================================================================
Label Status:
U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
e - Label ELC
FEC Flags:
LF - Lower FEC, UF - Upper FEC, BA - ASBR Backup FEC
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
(I) - SR-ISIS Next Hop (O) - SR-OSPF Next Hop
(C) - FEC resolved with class-based-forwarding
===============================================================================
LDP IPv4 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
10.20.1.6/32(B) Swap 262142 262142
10.20.1.2 LspId 65545
-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 1
*A:Dut-C# show router ldp bindings active prefixes prefix 10.20.1.3/32
============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.2:0)
(IPv6 LSR ID ::[0])
============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
(C) - FEC resolved with class-based-forwarding
============================================================================
LDP IPv4 Prefix Bindings (Active)
============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
----------------------------------------------------------------------------
10.20.1.3/32 Push -- 262143
10.20.1.3 LspId 5
10.20.1.3/32 Push -- 262143
10.20.1.3 LspId 6
10.20.1.3/32 Push -- 262143
10.20.1.3 LspId 7
10.20.1.3/32 Push -- 262143
10.20.1.3 LspId 8
10.20.1.3/32(C) Swap 262141 262143
10.20.1.3 LspId 5
10.20.1.3/32(C) Swap 262141 262143
10.20.1.3 LspId 6
10.20.1.3/32(C) Swap 262141 262143
10.20.1.3 LspId 7
10.20.1.3/32(C) Swap 262141 262143
10.20.1.3 LspId 8
----------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 8
============================================================================
show router ldp bindings active prefixes prefix 10.20.1.3/32 detail
============================================================================
LDP Bindings (IPv4 LSR ID 10.20.1.2:0)
(IPv6 LSR ID ::[0])
============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
(C) - FEC resolved with class-based-forwarding
============================================================================
LDP IPv4 Prefix Bindings (Active)
============================================================================
----------------------------------------------------------------------------
Prefix : 10.20.1.3/32
Op : Push
Ing Lbl : -- Egr Lbl : 262143
Egr Int/LspId : LspId 5
EgrNextHop : 10.20.1.3
Egr. Flags : None Ing. Flags : None
Lsp Name : B_C_5
Metric : 1000 Mtu : 1492
----------------------------------------------------------------------------
Prefix : 10.20.1.3/32
Op : Push
Ing Lbl : -- Egr Lbl : 262143
Egr Int/LspId : LspId 6
EgrNextHop : 10.20.1.3
Egr. Flags : None Ing. Flags : None
Lsp Name : B_C_6
Metric : 1000 Mtu : 1492
----------------------------------------------------------------------------
Prefix : 10.20.1.3/32
Op : Push
Ing Lbl : -- Egr Lbl : 262143
Egr Int/LspId : LspId 7
EgrNextHop : 10.20.1.3
Egr. Flags : None Ing. Flags : None
Lsp Name : B_C_7
Metric : 1000 Mtu : 1492
----------------------------------------------------------------------------
Prefix : 10.20.1.3/32
Op : Push
Ing Lbl : -- Egr Lbl : 262143
Egr Int/LspId : LspId 8
EgrNextHop : 10.20.1.3
Egr. Flags : None Ing. Flags : None
Lsp Name : B_C_8
Metric : 1000 Mtu : 1492
----------------------------------------------------------------------------
Prefix : 10.20.1.3/32(C)
Op : Swap
Ing Lbl : 262141 Egr Lbl : 262143
Egr Int/LspId : LspId 5
EgrNextHop : 10.20.1.3
Egr. Flags : None Ing. Flags : None
Lsp Name : B_C_5
Metric : 1000 Mtu : 1492
CBF Default LSP: No CBF FC : None
----------------------------------------------------------------------------
Prefix : 10.20.1.3/32(C)
Op : Swap
Ing Lbl : 262141 Egr Lbl : 262143
Egr Int/LspId : LspId 6
EgrNextHop : 10.20.1.3
Egr. Flags : None Ing. Flags : None
Lsp Name : B_C_6
Metric : 1000 Mtu : 1492
CBF Default LSP: No CBF FC : None
----------------------------------------------------------------------------
Prefix : 10.20.1.3/32(C)
Op : Swap
Ing Lbl : 262141 Egr Lbl : 262143
Egr Int/LspId : LspId 7
EgrNextHop : 10.20.1.3
Egr. Flags : None Ing. Flags : None
Lsp Name : B_C_7
Metric : 1000 Mtu : 1492
CBF Default LSP: Yes CBF FC : be l2 af l1 h2 ef h1 nc
----------------------------------------------------------------------------
Prefix : 10.20.1.3/32(C)
Op : Swap
Ing Lbl : 262141 Egr Lbl : 262143
Egr Int/LspId : LspId 8
EgrNextHop : 10.20.1.3
Egr. Flags : None Ing. Flags : None
Lsp Name : B_C_8
Metric : 1000 Mtu : 1492
CBF Default LSP: No CBF FC : None
============================================================================
No. of IPv4 Prefix Active Bindings: 8
============================================================================
adjacency
adjacency
Syntax
adjacency [ip-address | ip-int-name | nbr-system-id] [detail]
Context
[Tree] (show>router>isis adjacency)
Full Context
show router isis adjacency
Description
This command displays information regarding IS-IS neighbors. When no ip-address, ip-int-name, or nbr-system-id is specified, then all adjacencies are displayed.
Parameters
- ip-address
-
When specified, only adjacencies with that interface is displayed.
- ip-int-name
-
When specified, only adjacencies with that interface is displayed.
- nbr-system-id
-
When specified, only the adjacency with that ID is displayed.
- detail
-
All output is displayed in the detailed format.
- mt-id-number
-
Specifies the multi topology ID number for this route.
Platforms
7705 SAR Gen 2
Output
Standard and Detailed IS-IS Adjacency Output
Output fields: adjacency describes the standard and detailed command output fields for an IS-IS adjacency.
|
Label |
Description |
|---|---|
|
Interface |
Interface name associated with the neighbor. |
|
System-id |
Neighbor’s system ID. |
|
Level |
1-L1 only, 2-L2 only, 3-L1 and L2. |
|
State |
Up, down, new, one-way, initializing, or rejected. |
|
Hold |
Hold time remaining for the adjacency. |
|
SNPA |
Subnetwork point of attachment, MAC address of the next hop. |
|
Circuit type |
Level on the interface L1, L2, or both. |
|
Expires In |
Number of seconds until adjacency expires. |
|
Priority |
Priority to become designated router. |
|
Up/down transitions |
Number of times neighbor state has changed. |
|
Event |
Event causing last transition. |
|
Last transition |
Time since last transition change. |
|
Speaks |
Supported protocols (only IP). |
|
IP address |
IP address of neighbor. |
|
MT enab |
Yes — The neighbor is advertising at least 1 non MTID#0. |
|
Topology |
Derived from the MT TLV in the IIH
Not supported MTIDs => Topology line suppressed |
*A:Dut-C# show router isis adjacency
===============================================================================
Rtr Base ISIS Instance 0 Adjacency
===============================================================================
System ID Usage State Hold Interface MT-ID
-------------------------------------------------------------------------------
Dut-B L1L2 Up 23 to_Dut-B 0
Dut-D L1L2 Up 23 to_Dut-D1 0
-------------------------------------------------------------------------------
Adjacencies : 2
===============================================================================
*A:Dut-C# show router isis adjacency Dut-D detail
===============================================================================
Rtr Base ISIS Instance 0 Adjacency (detail)
===============================================================================
SystemID : Dut-D SNPA : 00:00:00:00:00:04
Interface : to_Dut-D1 Up Time : 0d 00:05:23
State : Up Priority : 0
Nbr Sys Typ : L1L2 L. Circ Typ : L1L2
Hold Time : 19 Max Hold : 27
Adj Level : L1L2 MT Enabled : No
Topology : Unicast
IPv6 Neighbor : fe80::200:ff:fe00:4
IPv4 Neighbor : 1.3.4.4
IPv4 Adj SID : Label 262139
Restart Support : Disabled
Restart Status : Not currently being helped
Restart Suppressed : Disabled
Number of Restarts: 0
Last Restart at : Never
===============================================================================
*A:Dut-C#
*A:ALA-A# show router isis adjacency 180.0.7.12
===============================================================================
Rtr Base ISIS Instance 0 Adjacency
===============================================================================
System ID Usage State Hold Interface
-------------------------------------------------------------------------------
asbr_east L2 Up 25 if2/5
-------------------------------------------------------------------------------
Adjacencies : 1
===============================================================================
*A:ALA-A#
*A:ALA-A# show router isis adjacency if2/5
===============================================================================
Rtr Base ISIS Instance 0 Adjacency
===============================================================================
System ID Usage State Hold Interface
-------------------------------------------------------------------------------
asbr_east L2 Up 20 if2/5
-------------------------------------------------------------------------------
Adjacencies : 1
===============================================================================
*A:ALA-A#
*A:Dut-A# show router isis adjacency detail
===============================================================================
Rtr Base ISIS Instance 0 Adjacency (detail)
===============================================================================
SystemID : Dut-B SNPA : 20:81:01:01:00:01
Interface : ip-3FFE::A0A:101 Up Time : 0d 00:56:10
State : Up Priority : 64
Nbr Sys Typ : L1 L. Circ Typ : L1
Hold Time : 2 Max Hold : 2
Adj Level : L1 MT Enabled : Yes
Topology : Unicast, IPv6-Unicast
IPv6 Neighbor : FE80::2281:1FF:FE01:1
IPv4 Neighbor : 10.10.1.2
Restart Support : Disabled
Restart Status : Not currently being helped
Restart Supressed : Disabled
Number of Restarts: 0
Last Restart at : Never
SystemID : Dut-B SNPA : 20:81:01:01:00:01
Interface : ip-3FFE::A0A:101 Up Time : 0d 00:56:10
State : Up Priority : 64
Nbr Sys Typ : L2 L. Circ Typ : L2
Hold Time : 2 Max Hold : 2
Adj Level : L2 MT Enabled : Yes
Topology : Unicast, IPv6-Unicast
IPv6 Neighbor : FE80::2281:1FF:FE01:1
IPv4 Neighbor : 10.10.1.2
Restart Support : Disabled
Restart Status : Not currently being helped
Restart Supressed : Disabled
Number of Restarts: 0
Last Restart at : Never
SystemID : Dut-F SNPA : 00:00:00:00:00:00
Interface : ies-1-3FFE::A0A:1501 Up Time : 0d 01:18:34
State : Up Priority : 0
Nbr Sys Typ : L1L2 L. Circ Typ : L1L2
Hold Time : 5 Max Hold : 6
Adj Level : L1L2 MT Enabled : Yes
Topology : Unicast, IPv6-Unicast
IPv6 Neighbor : FE80::2285:FFFF:FE00:0
IPv4 Neighbor : 10.10.21.6
Restart Support : Disabled
Restart Status : Not currently being helped
Restart Supressed : Disabled
Number of Restarts: 0
Last Restart at : Never
===============================================================================
*A:Dut-A#
adjacency
Syntax
adjacency [system-id]
Context
[Tree] (clear>router>isis adjacency)
Full Context
clear router isis adjacency
Description
This command clears and resets the entries from the IS-IS adjacency database.
Parameters
- system-id
-
When the system ID is entered, only the specified entries are removed from the IS-IS adjacency database.
Platforms
7705 SAR Gen 2
admin-group
admin-group
Syntax
admin-group [name]
Context
[Tree] (show>router>if-attribute admin-group)
Full Context
show router if-attribute admin-group
Description
This command displays administrative group statistics.
Parameters
- name
-
Displays entries that are associated with the specified administrative group name, up to 32 characters.
Platforms
7705 SAR Gen 2
Output
The following output is an example of administrative group statistics, and Output fields: administrative group describes the fields.
Output Example*A:node-3# show router if-attribute admin-group
==================================================
Interface Administrative Groups
==================================================
Group Name Group Value
--------------------------------------------------
Admin 4
admin 1
--------------------------------------------------
No. of Groups: 2
==================================================
*A:node-3#
|
Label |
Description |
|---|---|
|
Group Name |
The name of the administrative group |
|
Group Value |
The integer value of the administrative group |
|
No. of Groups |
The total number of displayed administrative groups |
admin-lock
admin-lock
Syntax
admin-lock
Context
[Tree] (tools>perform>service>id admin-lock)
Full Context
tools perform service id admin-lock
Description
Commands in this context apply an administrative lock for a spoke SDP that is bound to a VLL SAP, another spoke-\ sdp or a VPLS interface for an MPLS-TP PW. After the PW is locked, it can be put into loopback mode. The command must be executed at both ends of the PW or MS-PW represented by the spoke-\ SDP. Test traffic can then be injected using a test SAP.
Platforms
7705 SAR Gen 2
agg-rate
agg-rate
Syntax
agg-rate
Context
[Tree] (show>qos agg-rate)
Full Context
show qos agg-rate
Description
This command displays aggregate rate information.
Platforms
7705 SAR Gen 2
aggregate
aggregate
Syntax
aggregate [family] [active] [ detail]
Context
[Tree] (show>router aggregate)
Full Context
show router aggregate
Description
This command displays aggregated routes.
Parameters
- active
-
This keyword filters out inactive aggregates.
- detail
-
This keyword displays detailed information.
- family
-
Specifies the family to display.
Platforms
7705 SAR Gen 2
Output
The following output is an example of router aggregate information, and Output fields: aggregate describes the output fields.
Output Example*A:ALA-12# show router 3 aggregate
==============================================================================
Aggregates (Service: 3)
==============================================================================
Prefix Summary AS Set Aggr AS Aggr IP-Address State
------------------------------------------------------------------------------
------------------------------------------------------------------------------
No. of Aggregates: 0
-----------------------------------------------------------
*A:ALA-12#
*A:Dut-A>config>router# show router aggregate
===============================================================================
Aggregates (Router: Base)
===============================================================================
Prefix Aggr IP-Address Aggr AS
Summary AS Set State
NextHop NextHopType
-------------------------------------------------------------------------------
10.2.3.0/24 0.0.0.0 0
False False Inactive
10.2.2.2 Indirect
10.2.0.0/16 0.0.0.0 0
False False Active
None
-------------------------------------------------------------------------------
No. of Aggregates: 2
===============================================================================
*A:CPM133>config>router# show router aggregate
===============================================================================
Aggregates (Router: Base)
===============================================================================
Prefix Aggr IP-Address Aggr AS
Summary AS Set State
NextHop Community NextHopType
-------------------------------------------------------------------------------
10.0.0.0/8 0.0.0.0 0
False False Inactive
100:33 Blackhole
-------------------------------------------------------------------------------
No. of Aggregates: 1
===============================================================================
|
Label |
Description |
|---|---|
|
Prefix |
Displays the destination address of the aggregate route in dotted decimal notation. |
|
Summary |
Specifies whether the aggregate or more specific components are advertised. |
|
AS Set |
Displays an aggregate where the path advertised for the route consists of all elements contained in all paths that are being summarized. |
|
Aggr AS |
Displays the aggregator path attribute to the aggregate route. |
|
Aggr IP-Address |
The IP address of the aggregated route. |
|
State |
The operational state of the aggregated route. |
|
No. of Aggregates |
The total number of aggregated routes. |
alarms
alarms
Syntax
alarms [cleared] [count count] [newer-than days] [severity severity-level]
Context
[Tree] (show>system alarms)
Full Context
show system alarms
Description
This command displays facility alarms on the system. Alarm support covers a focused subset of router states that are likely to indicate service impacts (or imminent service impacts) related to the overall state of hardware assemblies (cards, fans, links, and so on).
Platforms
7705 SAR Gen 2
Output
Output fields: system alarms describes the alarms output fields.
Use the following command to display facility alarms on the system.
show system alarms===============================================================================
Alarms [Critical:1 Major:2 Minor:0 Warning:0 Total:3]
===============================================================================
Index Date/Time Severity Alarm Resource
Details
-------------------------------------------------------------------------------
8 2011/04/01 18:36:43.80 MAJOR 7-2011-1 Power Supply 1
Power supply 1, power lost
7 2011/04/01 18:35:57.00 MAJOR 7-2005-1 Chassis 1
Chassis 1: temperature too high
6 2011/04/01 18:35:24.80 CRITICAL 7-2006-1 Fan 1
Fan 1 failed
===============================================================================
===============================================================================
Alarms [Critical:3 Major:1 Minor:0 Warning:0 Total:4]
===============================================================================
Index Date/Time Severity Alarm Resource
Details
-------------------------------------------------------------------------------
8 2022/08/23 17:06:54.70 MAJOR 7-2426-1 Chassis esa-1
ESA Chassis temperature status degraded
7 2022/08/23 17:06:54.70 CRITICAL 7-2416-1 Chassis esa-1
ESA Chassis fan status degraded
6 2022/08/23 17:06:14.70 CRITICAL 7-2410-1 Chassis esa-1
ESA Chassis power supply 2 status failed
5 2022/08/23 17:06:14.70 CRITICAL 7-2404-1 Chassis esa-1
ESA Chassis power supply 1 status degraded
===============================================================================Use the following command to display cleared facility alarms on the system.
show system alarms cleared===============================================================================
Cleared Alarms [Size:500 Total:5 (not wrapped)]
===============================================================================
Index Date/Time Severity Alarm Resource
Details
-------------------------------------------------------------------------------
5 2011/04/01 18:11:55.00 MAJOR 7-2005-1 Chassis 1
Clear Chassis temperature too high alarm
3 2011/04/01 18:11:54.50 CRITICAL 7-2051-1 Power Supply 1
Clear Power Supply failure
2 2011/04/01 18:11:54.40 CRITICAL 7-2050-1 Power Supply 1
Clear Power Supply failure
4 2011/04/01 18:11:54.10 MINOR 7-2004-1 Fan 1
Clear Fan wrong type failure
1 2011/04/01 18:11:54.00 CRITICAL 7-2007-1 Power Supply 1
Clear Power Supply failure
===============================================================================
===============================================================================
Cleared Alarms [Size:500 Total:14 (not wrapped)]
===============================================================================
Index Date/Time Severity Alarm Resource
Details
-------------------------------------------------------------------------------
15 2022/09/22 14:49:36.00 MAJOR 7-2422-1 Chassis esa-1
ESA Chassis power supply redundancy degraded - cleared, now redundant
14 2022/09/22 14:49:36.00 MAJOR 7-2400-1 Chassis esa-1
ESA Chassis aggregate hardware degraded status cleared, now ok
13 2022/09/22 14:49:31.00 CRITICAL 7-2410-1 Chassis esa-1
ESA Chassis power supply 2 failed status cleared, now ok
12 2022/09/22 11:27:04.80 MAJOR 7-2400-1 Chassis esa-1
ESA Chassis aggregate hardware degraded status cleared, now ok
|
Label |
Description |
|---|---|
|
Index |
Alarm index number |
|
Date/Time |
Date and time string for the alarm |
|
Severity |
Severity level of the alarm |
|
Alarm |
Alarm identifier |
|
Resource |
Facility associated with the alarm |
|
Details |
Description of the alarm |
alias
alias
Syntax
alias
Context
[Tree] (show alias)
Full Context
show alias
Description
This command shows command aliases.
This command is not available in the MD-CLI. Use the MD-CLI info detail environment command-alias command.
Platforms
7705 SAR Gen 2
Output
The following output is an example of alias information, and Output fields: alias describes the output fields.
Output ExampleA:ALA-103>config>system# show alias
==============================================================================
Alias-Name Alias-command-name
==============================================================================
sri show router interface
sse show service service-using epipe
ssvpls show service service-using vpls
ssvprn show service service-using vprn
ssi show service service-using ies
------------------------------------------------------------------------------
Number of aliases : 5
==============================================================================
A:ALA-103>config>system#
|
Label |
Description |
|---|---|
|
Alias-Name |
Displays the name of the alias. |
|
Alias-command-name |
The command and parameter syntax that define the alias. |
|
Number of aliases |
The total number of aliases configured on the router. |
all
all
Syntax
all
Context
[Tree] (show>service>id all)
Full Context
show service id all
Description
This command displays detailed information for all aspects of the service.
Platforms
7705 SAR Gen 2
Output
The following output is an example of all service ID information, and Output fields: service ID all describes the output fields.
Output Example*A:PE# show service id 1 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 1 Vpn Id : 0
Service Type : Epipe
Name : 1
Description : (Not Specified)
Customer Id : 1 Creation Origin : manual
Last Status Change: 08/31/2018 11:12:04
Last Mgmt Change : 08/31/2018 11:09:25
Test Service : No
Admin State : Up Oper State : Up
MTU : 1514
Vc Switching : False
SAP Count : 2 SDP Bind Count : 0
Per Svc Hashing : Disabled
Vxlan Src Tep Ip : N/A
Force QTag Fwd : Disabled
Oper Group : <none>
-------------------------------------------------------------------------------
BGP Information
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
ETH-CFM service specifics
-------------------------------------------------------------------------------
Tunnel Faults : ignore
-------------------------------------------------------------------------------
Service Destination Points(SDPs)
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
Service Access Points
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SAP 1/1/1
-------------------------------------------------------------------------------
Service Id : 1
SAP : 1/1/1 Encap : null
Description : (Not Specified)
Admin State : Up Oper State : Up
Flags : None
Multi Svc Site : None
Last Status Change : 08/31/2018 11:12:04
Last Mgmt Change : 08/31/2018 11:09:24
Sub Type : regular
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Split Horizon Group: (Not Specified)
LLF Admin State : Down LLF Oper State : Clear
Admin MTU : 1514 Oper MTU : 1514
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
qinq-pbit-marking : both
Endpoint : N/A
Egr Agg Rate Limit : max
Q Frame-Based Acct : Disabled Limit Unused BW : Disabled
Vlan-translation : None
Qinq-vlan- Qinq-vlan-
translation : None translation Ids : None
Acct. Pol : None Collect Stats : Disabled
Application Profile: None
Transit Policy : None
Oper Group : (none) Monitor Oper Grp : (none)
Host Lockout Plcy : n/a
Ignore Oper Down : Disabled
Lag Link Map Prof : (none)
Cflowd : Disabled
Bandwidth : Not-Applicable
Oper DCpu Prot Pol*: _default-access-policy
-------------------------------------------------------------------------------
ETH-CFM SAP specifics
-------------------------------------------------------------------------------
Tunnel Faults : n/a AIS : Disabled
MC Prop-Hold-Timer : n/a
Squelch Levels : None
Collect Lmm Stats : Disabled
LMM FC Stats : None
LMM FC In Prof : None
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1 Egress qos-policy : 1
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
Shared Q plcy : n/a Multipoint shared : Disabled
I. Sched Pol : (Not Specified)
E. Sched Pol : (Not Specified)
I. Policer Ctl Pol : (Not Specified)
E. Policer Ctl Pol : (Not Specified)
E. HS Sec. Shaper : (Not Specified)
I. QGrp Redir. List: (Not Specified)
E. QGrp Redir. List: (Not Specified)
-------------------------------------------------------------------------------
Sap Aggregate Stats
-------------------------------------------------------------------------------
Packets Octets
Ingress
Aggregate Offered : 0 0
Aggregate Forwarded : 0 0
Aggregate Dropped : 0 0
Egress
Aggregate Forwarded : 0 0
Aggregate Dropped : 0 0
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time : 08/31/2018 11:19:51
Packets Octets
CPM Ingress : 0 0
Forwarding Engine Stats
Dropped : 0 0
Received Valid : 0 0
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Off. Managed : 0 0
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Queueing Stats(Egress QoS Policy 1)
Dro. In/InplusProf : 0 0
Dro. Out/ExcProf : 0 0
For. In/InplusProf : 0 0
For. Out/ExcProf : 0 0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 1
For. In/InplusProf : 0 0
For. Out/ExcProf : 0 0
Dro. In/InplusProf : 0 0
Dro. Out/ExcProf : 0 0
* indicates that the corresponding row element may have been truncated.
-------------------------------------------------------------------------------
SAP 1/1/9:1
-------------------------------------------------------------------------------
Service Id : 1
SAP : 1/1/9:1 Encap : q-tag
Description : (Not Specified)
Admin State : Up Oper State : Up
Flags : None
Multi Svc Site : None
Last Status Change : 08/31/2018 11:09:25
Last Mgmt Change : 08/31/2018 11:23:45
Sub Type : regular
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Split Horizon Group: (Not Specified)
Admin MTU : 1518 Oper MTU : 1518
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
qinq-pbit-marking : both
Endpoint : N/A
Egr Agg Rate Limit : max
Q Frame-Based Acct : Disabled Limit Unused BW : Disabled
Vlan-translation : None
Qinq-vlan- Qinq-vlan-
translation : None translation Ids : None
Acct. Pol : None Collect Stats : Disabled
Application Profile: None
Transit Policy : None
Oper Group : (none) Monitor Oper Grp : (none)
Host Lockout Plcy : n/a
Ignore Oper Down : Disabled
Lag Link Map Prof : (none)
Cflowd : Disabled
Bandwidth : Not-Applicable
Oper DCpu Prot Pol*: _default-access-policy
-------------------------------------------------------------------------------
ETH-CFM SAP specifics
-------------------------------------------------------------------------------
Tunnel Faults : n/a AIS : Disabled
MC Prop-Hold-Timer : n/a
Squelch Levels : None
Collect Lmm Stats : Disabled
LMM FC Stats : None
LMM FC In Prof : None
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1 Egress qos-policy : 1
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
Shared Q plcy : n/a Multipoint shared : Disabled
I. Sched Pol : (Not Specified)
E. Sched Pol : (Not Specified)
I. Policer Ctl Pol : (Not Specified)
E. Policer Ctl Pol : (Not Specified)
E. HS Sec. Shaper : (Not Specified)
I. QGrp Redir. List: (Not Specified)
E. QGrp Redir. List: (Not Specified)
-------------------------------------------------------------------------------
Sap Aggregate Stats
-------------------------------------------------------------------------------
Packets Octets
Ingress
Aggregate Offered : 0 0
Aggregate Forwarded : 0 0
Aggregate Dropped : 0 0
Egress
Aggregate Forwarded : 0 0
Aggregate Dropped : 0 0
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time : 08/31/2018 11:19:51
Packets Octets
CPM Ingress : 0 0
Forwarding Engine Stats
Dropped : 0 0
Received Valid : 0 0
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Off. Managed : 0 0
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Queueing Stats(Egress QoS Policy 1)
Dro. In/InplusProf : 0 0
Dro. Out/ExcProf : 0 0
For. In/InplusProf : 0 0
For. Out/ExcProf : 0 0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 1
For. In/InplusProf : 0 0
For. Out/ExcProf : 0 0
Dro. In/InplusProf : 0 0
Dro. Out/ExcProf : 0 0
* indicates that the corresponding row element may have been truncated.
-------------------------------------------------------------------------------
Service Endpoints
-------------------------------------------------------------------------------
No Endpoints found.
-------------------------------------------------------------------------------
==========================================================================
VLL Sites
==========================================================================
Site Site-Id Dest Admin Oper Fwdr
--------------------------------------------------------------------------
No Matching Entries
==========================================================================
===============================================================================
*A:PE#
Output fields: service ID all describes the Show service ID output fields when the all option is specified.
|
Label |
Description |
|---|---|
|
Service Id |
The service identifier |
|
VPN Id |
The number which identifies the VPN |
|
Service Type |
The type of service |
|
VLL Type |
The VLL type |
|
SDP Id |
The SDP identifier |
|
Description |
Generic information about the service |
|
Customer Id |
The customer identifier |
|
Last Mgmt Change |
The date and time of the most recent management-initiated change |
|
Endpoint |
The name of the service endpoint |
|
Flags |
The conditions that affect the operating status of this SAP. Display output includes: ServiceAdminDown, SapAdminDown, InterfaceAdminDown, PortOperDown, PortMTUTooSmall, L2OperDown, SapIngressQoSMismatch, SapEgressQoSMismatch,RelearnLimitExceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr, SapParamMismatch, CemSapNoEcidOrMacAddr, StandByForMcRing, ServiceMTUTooSmall, NoSapEpipeRingNode. |
|
SAP Count |
The number of SAPs specified for this service |
|
SDP Bind Count |
The number of SDPs bound to this service |
|
Split Horizon Group Specifics |
|
|
Split Horizon Group |
The name of the split horizon group for this VPLS |
|
Description |
The description of the split horizon group |
|
Last Changed |
The date and time of the most recent management-initiated change to this split horizon group |
|
Service Destination Points (SDPs) |
|
|
SDP Id |
The SDP identifier |
|
Type |
Indicates whether this service SDP binding is a spoke or a mesh |
|
Admin Path MTU |
The desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented. |
|
Oper Path MTU |
The actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented |
|
Delivery |
The type of delivery used by the SDP: GRE or MPLS |
|
Admin State |
The administrative state of this SD |
|
Oper State |
The operational state of this SDP |
|
Jitter Buffer (packets) |
The jitter buffer length in number of packet buffers |
|
Playout Threshold (packets) |
The playout buffer packets threshold in number of packet buffers |
|
Playout Threshold (packets) |
Indicates the current packet depth of the jitter buffer |
|
Peer Pw Bits |
The bits set by the LDP peer when there is a fault on its side of the pseudowire. LAC failures occur on the SAP that has been configured on the pipe service, PSN bits are set by SDP-binding failures on the pipe service. The pwNotForwarding bit is set when none of the above failures apply, such as an MTU mismatch failure. This value is only applicable if the peer is using the pseudowire status signaling method to indicate faults. pwNotForwarding — Pseudowire not forwarding lacIngressFault Local — Attachment circuit RX fault lacEgressFault Local — Attachment circuit TX fault psnIngressFault Local — PSN-facing PW RX fault psnEgressFault Local — PSN-facing PW TX fault pwFwdingStandby — Pseudowire in standby mode |
|
Signaling Override |
The overriding signaled pseudowire type, as configured under the signaled-vc-type-override option for Apipes. This field is only displayed if signaled-vc-type-override is configured. |
all
Syntax
all
Context
[Tree] (show>service>id>mld-snooping all)
Full Context
show service id mld-snooping all
Description
This command displays detailed information about MLD snooping.
Platforms
7705 SAR Gen 2
Output
The following output is an example of service MLD snooping information.
Output Example*A:rbae_C# show service id 1 mld-snooping all
===============================================================================
MLD Snooping info for service 1
-------------------------------------------------------------------------------
MLD Snooping Base info
-------------------------------------------------------------------------------
Admin State : Up
Querier : FE80:db8:12 on SAP 2/1/5
-------------------------------------------------------------------------------
Sap/Sdp Oper MRtr Send Max Num MVR Num
Id State Port Queries Groups From-VPLS Groups
-------------------------------------------------------------------------------
sap:1/1/4 Up No Disabled No Limit Local 0
sap:2/1/5 Up Yes Disabled No Limit Local 0
sdp:31:1 Up No Disabled No Limit N/A 0
sdp:36:1 Up No Disabled No Limit N/A 0
-------------------------------------------------------------------------------
MLD Snooping Querier info
-------------------------------------------------------------------------------
Sap Id : 2/1/5
IP Address : FE80:db8:12
Expires : 11s
Up Time : 0d 00:05:05
Version : 2
General Query Interval : 10s
Query Response Interval : 1.0s
Robust Count : 2
-------------------------------------------------------------------------------
MLD Snooping Multicast Routers
-------------------------------------------------------------------------------
MRouter
Sap/Sdp Id Up Time Expires Version
-------------------------------------------------------------------------------
FE80::12
2/1/5 0d 00:05:05 11s 2
-------------------------------------------------------------------------------
Number of mrouters: 1
-------------------------------------------------------------------------------
MLD Snooping Proxy-reporting DB
-------------------------------------------------------------------------------
Group Address
Mode Up Time Num Sources
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
MLD Snooping SAP 1/1/4 Port-DB
-------------------------------------------------------------------------------
Group Address
Mode Type From-VPLS Up Time Expires Num MC
Src Stdby
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
MLD Snooping SAP 2/1/5 Port-DB
-------------------------------------------------------------------------------
Group Address
Mode Type From-VPLS Up Time Expires Num MC
Src Stdby
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
MLD Snooping SDP 31:1 Port-DB
-------------------------------------------------------------------------------
Group Address
Mode Type From-VPLS Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
MLD Snooping SDP 36:1 Port-DB
-------------------------------------------------------------------------------
Group Address
Mode Type From-VPLS Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
MLD Snooping Static Source Groups
-------------------------------------------------------------------------------
MLD Snooping Statistics
-------------------------------------------------------------------------------
Message Type Received Transmitted Forwarded
-------------------------------------------------------------------------------
General Queries 43 0 129
Group Queries 0 0 0
Group-Source Queries 0 0 0
V1 Reports 0 0 0
V2 Reports 4 35 0
V1 Done 0 0 0
Unknown Type 0 N/A 0
-------------------------------------------------------------------------------
Drop Statistics
-------------------------------------------------------------------------------
Bad Length : 0
Bad MLD Checksum : 0
Bad Encoding : 0
No Router Alert : 0
Zero Source IP : 0
Wrong Version : 0
Lcl-Scope Packets : 0
Rsvd-Scope Packets : 0
Send Query Cfg Drops : 0
Import Policy Drops : 0
Exceeded Max Num Groups : 0
MCAC Policy Drops : 0
MCS Failures : 0
MVR From VPLS Cfg Drops : 0
MVR To SAP Cfg Drops : 0
-------------------------------------------------------------------------------
MLD Snooping Multicast VPLS Registration info
-------------------------------------------------------------------------------
MLD Snooping Admin State : Up
MVR Admin State : Down
MVR Policy : None
-------------------------------------------------------------------------------
Local SAPs/SDPs
-------------------------------------------------------------------------------
Svc Id Sap/Sdp Oper From Num Local
Id State VPLS Groups
-------------------------------------------------------------------------------
1 sap:1/1/4 Up Local 0
1 sap:2/1/5 Up Local 0
1 sdp:31:1 Up N/A 0
1 sdp:36:1 Up N/A 0
-------------------------------------------------------------------------------
MVR SAPs (from-vpls=1)
-------------------------------------------------------------------------------
Svc Id Sap/Sdp Oper From Num MVR
Id State VPLS Groups
-------------------------------------------------------------------------------
No MVR SAPs found.
===============================================================================
*A:rbae_C#
all
Syntax
all
Context
[Tree] (show>service>id>igmp-snooping all)
Full Context
show service id igmp-snooping all
Description
Displays detailed information for all aspects of IGMP snooping on the VPLS service.
Platforms
7705 SAR Gen 2
Output
The following output is an example of IGMP snooping information.
Output Example*A:ALA-48>show>service>id>igmp-snooping>snooping# all
===============================================================================
IGMP Snooping info for service 750
===============================================================================
IGMP Snooping Base info
-------------------------------------------------------------------------------
Admin State : Up
Querier : No querier found
-------------------------------------------------------------------------------
Sap/Sdp Oper MRtr Send Max Num Num
Id State Port Queries Groups Groups
-------------------------------------------------------------------------------
sap:1/1/7:0 Down No Disabled No Limit 0
sdp:1:22 Down No Disabled No Limit 0
sdp:8:750 Down No Disabled No Limit 0
-------------------------------------------------------------------------------
IGMP Snooping Querier info
-------------------------------------------------------------------------------
No querier found for this service.
-------------------------------------------------------------------------------
IGMP Snooping Multicast Routers
-------------------------------------------------------------------------------
MRouter Sap/Sdp Id Up Time Expires Version
-------------------------------------------------------------------------------
Number of mrouters: 0
-------------------------------------------------------------------------------
IGMP Snooping Proxy-reporting DB
-------------------------------------------------------------------------------
Group Address Mode Type Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
------------------------------------------------------------------------------
IGMP Snooping SAP 1/1/7:0 Port-DB
-------------------------------------------------------------------------------
Group Address Mode Type Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
IGMP Snooping SDP 1:22 Port-DB
-------------------------------------------------------------------------------
Group Address Mode Type Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
IGMP Snooping SDP 8:750 Port-DB
-------------------------------------------------------------------------------
Group Address Mode Type Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
IGMP Snooping Static Source Groups
-------------------------------------------------------------------------------
IGMP Snooping Statistics
-------------------------------------------------------------------------------
Message Type Received Transmitted Forwarded
-------------------------------------------------------------------------------
General Queries 0 0 0
Group Queries 0 0 0
Group-Source Queries 0 0 0
V1 Reports 0 0 0
V2 Reports 0 0 0
V3 Reports 0 0 0
V2 Leaves 0 0 0
Unknown Type 0 N/A 0
-------------------------------------------------------------------------------
Drop Statistics
-------------------------------------------------------------------------------
Bad Length : 0
Bad IP Checksum : 0
Bad IGMP Checksum : 0
Bad Encoding : 0
No Router Alert : 0
Zero Source IP : 0
Send Query Cfg Drops : 0
Import Policy Drops : 0
Exceeded Max Num Groups : 0
===============================================================================
*A:ALA-48>show>service>id>snooping#
Output fields: IGMP snooping all describes the show all service ID command output fields:
|
Label |
Description |
|---|---|
|
Admin State |
The administrative state of the IGMP instance |
|
Querier |
The address of the IGMP querier on the IP subnet to which the interface is attached |
|
Sap/Sdp Id |
The SAP and SDP IDs of the service ID |
|
Oper State |
The operational state of the SAP and SDP IDs of the service ID |
|
Mrtr Port |
The multicast router port |
|
Send Queries |
Send-queries command is enabled or disabled |
|
Max Num Groups |
The maximum number of multicast groups that can be joined on this SAP or SDP |
|
MVR From VPLS |
MVR from VPLS enabled |
|
Num Groups |
The actual number of multicast groups that can be joined on this SAP or SDP |
all
Syntax
all
Context
[Tree] (show>redundancy>multi-chassis all)
Full Context
show redundancy multi-chassis all
Description
This command displays brief multi-chassis redundancy information.
Platforms
7705 SAR Gen 2
Output
The following output is an example of multi-chassis all information, and Output fields: redundancy multi-chassis all describes the output fields.
Output ExampleB:Dut-B# show redundancy multi-chassis all
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.2
Description : Mc-Lag peer 10.10.10.2
Authentication : Disabled
Source IP Address : 0.0.0.0
Admin State : Enabled
===============================================================================
B:Dut-B#
B:Dut-B# show lag detail
===============================================================================
LAG Details
===============================================================================
LAG 1
-------------------------------------------------------------------------------
Description: Description For LAG Number 1
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 1 Mode : access
Adm : up Opr : up
Thres. Exceeded Cnt : 9 Port Threshold : 0
Thres. Last Cleared : 05/20/2006 00:12:35 Threshold Action : down
Dynamic Cost : false Encap Type : null
Configured Address : 1c:71:ff:00:01:41 Lag-IfIndex : 1342177281
Hardware Address : 1c:71:ff:00:01:41 Adapt Qos : distribute
Hold-time Down : 0.0 sec
LACP : enabled Mode : active
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : disabled
Number of sub-groups: 1 Forced : -
System Id : 1c:71:ff:00:00:00 System Priority : 32768
Admin Key : 32768 Oper Key : 32666
Prtr System Id : 20:f4:ff:00:00:00 Prtr System Priority : 32768
Prtr Oper Key : 32768
MC Peer Address : 10.10.10.2 MC Peer Lag-id : 1
MC System Id : 00:00:00:33:33:33 MC System Priority : 32888
MC Admin Key : 32666 MC Active/Standby : active
MC Lacp ID in use : true MC extended timeout : false
MC Selection Logic : peer decided
MC Config Mismatch : no mismatch
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
331/2/1 up active up yes 1 - 32768
331/2/2 up active up 1 - 32768
331/2/3 up active up 1 - 32768
331/2/4 up active up 1 - 32768
-------------------------------------------------------------------------------
Port-id Role Exp Def Dist Col Syn Aggr Timeout Activity
-------------------------------------------------------------------------------
331/2/1 actor No No Yes Yes Yes Yes Yes Yes
331/2/1 partner No No Yes Yes Yes Yes Yes Yes
331/2/2 actor No No Yes Yes Yes Yes Yes Yes
331/2/2 partner No No Yes Yes Yes Yes Yes Yes
331/2/3 actor No No Yes Yes Yes Yes Yes Yes
331/2/3 partner No No Yes Yes Yes Yes Yes Yes
331/2/4 actor No No Yes Yes Yes Yes Yes Yes
331/2/4 partner No No Yes Yes Yes Yes Yes Yes
===============================================================================
B:Dut-B#
|
Label |
Description |
|---|---|
|
Peer IP Address |
The multi-chassis redundancy peer. |
|
Description |
The text string describing the peer. |
|
Authentication |
If configured, displays the authentication key used between this node and the MC peer. |
|
Source IP Address |
The source address used to communicate with the MC peer. |
|
Admin State |
The administrative state of the peer. |
all
Syntax
all [color color] [end-point {ipv4-address | ipv6-address}] [preference preference-id] [distinguisher distinguisher-id] [tunnel-id tunnel-id]
all summary
Context
[Tree] (show>router>seg-rt>sr-policies all)
Full Context
show router segment-routing sr-policies all
Description
This command displays the traffic statistics of all or a filtered set of the BGP and static policies, or displays summary parameters.
Parameters
- color
-
Specifies the color to filter on.
- ipv4-address | ipv6-address
-
Specifies the end-point IPv4 or IPv6 address to filter on.
- preference-id
-
Specifies the preference ID to filter on.
- distinguisher-id
-
Specifies the distinguisher ID to filter on.
- summary
-
Displays the summary information for the BGP and static policies.
- tunnel-id
-
Specifies the tunnel ID to filter on.
Platforms
7705 SAR Gen 2
Output
The following output is an example of traffic statistics for all BGP and static policies.
Output Example
A:node-2# show router segment-routing sr-policies all
===============================================================================
SR-Policies Path
===============================================================================
-------------------------------------------------------------------------------
Type : srMpls
Active : No Owner : static
Color : 10
Head : 0.0.0.0 Endpoint Addr : 3ffe::a14:103
RD : 6 Preference : 10
BSID : 50001
TunnelId : 917508 Age : 12
Origin ASN : 0 Origin : 0.0.0.0
NumReEval : 0 LastReEvalReason: route-add
NumActPathChange: 0 Last Change : 08/18/2023 05:42:53
Act S-BFD Sess. : 1 S-BFD Threshold : 1
Maintenance Plcy: policy1
Ret Path BFD Lbl: 50008
Path Segment Lists:
Segment-List : 1 Weight : 1
Num Segments : 2 Last Change : 08/17/2023 17:11:08
1 MPLS Label : 524282 State : resolved-up
2 MPLS Label : 524280 State : N/A
-------------------------------------------------------------------------------
Type : srMpls
Active : Yes Owner : static
Color : 10
Head : 0.0.0.0 Endpoint Addr : 3ffe::a14:103
RD : 5 Preference : 20
BSID : 50001
TunnelId : 917508 Age : 12
Origin ASN : 0 Origin : 0.0.0.0
NumReEval : 0 LastReEvalReason: route-add
NumActPathChange: 0 Last Change : 08/18/2023 05:42:52
Act S-BFD Sess. : 1 S-BFD Threshold : 1
Maintenance Plcy: policy1
Ret Path BFD Lbl: 50008
Path Segment Lists:
Segment-List : 1 Weight : 1
Num Segments : 2 Last Change : 08/17/2023 17:11:08
1 MPLS Label : 524281 State : resolved-up
2 MPLS Label : 524282 State : N/A
===============================================================================all-subscriptions
all-subscriptions
Syntax
all-subscriptions
Context
[Tree] (show>log>cli all-subscriptions)
Full Context
show log cli all-subscriptions
Description
This command displays all subscriptions to all event logs that have a destination of 'cli'.
Platforms
7705 SAR Gen 2
anycast
anycast
Syntax
anycast [family] [detail]
Context
[Tree] (show>router>pim anycast)
Full Context
show router pim anycast
Description
This command displays PIM anycast rp-set information.
Parameters
- family
-
Specifies the address family.
- detail
-
Displays detailed information.
Platforms
7705 SAR Gen 2
Output
The following output is an example of a PIM anycast configuration.
Output ExampleA:dut-d# show router pim anycast
===================================================
PIM Anycast RP Entries
===================================================
Anycast RP Anycast RP Peer
---------------------------------------------------
100.100.100.1 10.102.1.1
10.103.1.1
10.104.1.1
---------------------------------------------------
PIM Anycast RP Entries : 3
===================================================
Output fields: PIM anycast provides PIM anycast field descriptions
|
Label |
Description |
|---|---|
|
Anycast Address |
Displays the candidate anycast address. |
|
Anycast RP Peer |
Displays the candidate anycast RP peer address. |
application
application
Syntax
application [app-name] [{dscp | dot1p}]
Context
[Tree] (show>router>sgt-qos application)
Full Context
show router sgt-qos application
Description
This command displays application QoS settings.
Parameters
- app-name
-
Specifies the application.
- dscp
-
Specifies to show DSCP values only.
- dot1p
-
Specifies to show dot1p values only.
Platforms
7705 SAR Gen 2
Output
The following output is an example of SGT QoS application information.
Output ExampleA:ALA-A# show router sgt-qos application
===============================================================================
DSCP Application Values
===============================================================================
Application Configured DSCP Value Default DSCP Value(s)
-------------------------------------------------------------------------------
bgp none nc1
bmp none af41
call-trace none af41
cflowd none nc1
dhcp none nc1, af41, nc2
diameter none af41
dns none af41
ftp none af41
grpc none af41
gtp none nc2, nc1
http none af41
icmp none be, nc1
igmp none nc1
igmp-reporter none nc1
l2tp none nc1
ldp none nc1
mld none nc1
mpls-udp-return none nc1
msdp none nc1
mtrace2 none nc1
ndis none nc1, nc2
ntp none nc1
ospf none nc1
pcep none nc1
pim none nc1
ptp none nc1
radius none nc1
rip none nc1
rsvp none nc1
sflow none nc1
snmp none af41
snmp-notification none af41
srrp none nc1
ssh none af41
syslog none af41
tacplus none af41
telnet none af41
tftp none af41
traceroute none be
vrrp none nc1
===============================================================================
===============================================================================
Dot1p Application Values
===============================================================================
Application Configured Dot1p Value Default Dot1p Value
-------------------------------------------------------------------------------
arp none 7
isis none 7
pppoe none 7
===============================================================================
A:ALA-A#
Some applications have multiple DSCP default values depending on the context or service.
applications
applications
Syntax
applications
Context
[Tree] (show>log applications)
Full Context
show log applications
Description
This command displays a list of all application names that can be used in event-control and filter commands.
Platforms
7705 SAR Gen 2
Output
The following output is an example of log application information.
Output Example*A:node-2# show log applications
===================================
Log Event Application Names
===================================
Application Name
-----------------------------------
BGP
...
CHASSIS
...
IGMP
...
LDP
...
MIRROR
...
MPLS
...
OSPF
PIM
...
PORT
...
SYSTEM
...
USER
...
VRTR
...
===================================
A:ALA-1#
arbiter-stats
arbiter-stats
Syntax
arbiter-stats
Context
[Tree] (clear>qos arbiter-stats)
Full Context
clear qos arbiter-stats
Description
Commands in this context clear arbiter statistics.
Platforms
7705 SAR Gen 2
arbiter-stats
Syntax
arbiter-stats
Context
[Tree] (monitor>qos arbiter-stats)
Full Context
monitor qos arbiter-stats
Description
Commands in this context configure monitor functionality for arbiter statistics.
Platforms
7705 SAR Gen 2
arbiter-stats
Syntax
arbiter-stats
Context
[Tree] (show>qos arbiter-stats)
Full Context
show qos arbiter-stats
Description
Commands in this context display arbiter statistics information.
Platforms
7705 SAR Gen 2
area
area
Syntax
area [area-id] [detail] [ lfa]
area [area-id] [detail] lfa flex-algo flex-algo-id
area [area-id] [detail] lfa flex-algo all
Context
[Tree] (show>router>ospf area)
Full Context
show router ospf area
Description
This command displays configuration information about all areas or the specified area.
Parameters
- area-id
-
Displays the OSPF area ID expressed in dotted decimal notation or as a 32-bit decimal integer.
- flex-algo-id
-
Displays the flexible algorithm identifier.
- detail
-
Displays detailed operational and statistical information about the specified area.
- lfa
-
Displays Loop-Free Alternate (LFA) next-hop information. This information corresponds to the backup next hops for IP links and nodes written in RTM by the base LFA feature.
- flex-algo
-
Displays OSPFv2 information for the specified algorithm identifier.
- flex-algo all
-
Displays OSPFv2 information for all flexible algorithms.
Platforms
7705 SAR Gen 2
Output
The following outputs are examples of OSPF area outputs.
Output fields: OSPF area describes the standard and detailed command output fields for an OSPF area.
|
Label |
Description |
|---|---|
|
Area Id |
A 32 bit integer uniquely identifying an area. |
|
Type |
NSSA — This area is configured as an NSSA area. Standard — This area is configured as a standard area (not NSSA or Stub). Stub — This area is configured as a stub area. |
|
SPF Runs |
The number of times that the intra-area route table has been calculated using this area’s link state database. |
|
LSA Count |
The total number of link-state advertisements in this area’s link state database, excluding AS External LSAs. |
|
LSA Cksum Sum |
The 32-bit unsigned sum of the link-state database advertisements LS checksums contained in this area’s link state database. This checksum excludes AS External LSAs (type-5). |
|
No. of OSPF Areas |
The number of areas configured on the router. |
|
Virtual Links |
The number of virtual links configured through this transit area. |
|
Active IFs |
The active number of interfaces configured in this area. |
|
Area Bdr Rtrs |
The total number of ABRs reachable within this area. |
|
AS Bdr Rtrs |
The total number of ASBRs reachable within this area. |
|
Last SPF Run |
The time when the last intra-area SPF was run on this area. |
|
Router LSAs |
The total number of router LSAs in this area. |
|
Network LSAs |
The total number of network LSAs in this area. |
|
Summary LSAs |
The summary of LSAs in this area. |
|
Asbr-summ LSAs |
The summary of ASBR LSAs in this area. |
|
Nssa-ext LSAs |
The total number of NSSA-EXT LSAs in this area. |
|
Area opaque LSAs |
The total number of opaque LSAs in this area. |
|
Total Nbrs |
The total number of neighbors in this area. |
|
Total IFs |
The total number of interfaces configured in this area. |
|
Total LSAs |
The sum of LSAs in this area excluding autonomous system external LSAs. |
|
Blackhole Range |
False — No blackhole route is installed for aggregates configured in this area. True — A lowest priority blackhole route is installed for aggregates configured in this area. |
|
Export Database |
False — The extended TE Database (TE-DB) is not exported in this area. True — The extended TE Database (TE-DB) is exported in this area. |
|
Export Policies |
The export policies configured in this area. |
|
Export Fltrd LSAs |
The total number of LSAs filtered by area export policies. |
|
Import Policies |
The import policies configured in this area. |
|
Import Fltrd LSAs |
The total number of LSAs filtered by area import policies. |
A:SetupCLI# show router ospf 0 area detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Areas (detail)
===============================================================================
-------------------------------------------------------------------------------
Area Id: 0.0.0.0
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Type : Standard
Key Rollover Int.: 10 LFA : Include
Virtual Links : 0 Total Nbrs : 0
Active IFs : 0 Total IFs : 2
Area Bdr Rtrs : 0 AS Bdr Rtrs : 0
SPF Runs : 0 Last SPF Run : Never
Router LSAs : 0 Network LSAs : 0
Summary LSAs : 0 Asbr-summ LSAs : 0
Nssa ext LSAs : 0 Area opaque LSAs : 1
Total LSAs : 1 LSA Cksum Sum : 0xd6af
Blackhole Range : False Unknown LSAs : 0
Export Database : False
Export Policies : None
Export Fltrd LSAs: 0
Import Policies : None
Import Fltrd LSAs: 0
-------------------------------------------------------------------------------
Area Id: 1.1.1.1
-------------------------------------------------------------------------------
Area Id : 1.1.1.1 Type : Stub
Default Cost : 16777215 Import Summary : Send Summary
Key Rollover Int.: 10 LFA : Exclude
Virtual Links : 0 Total Nbrs : 0
Active IFs : 0 Total IFs : 1
Area Bdr Rtrs : 0 AS Bdr Rtrs : 0
SPF Runs : 0 Last SPF Run : Never
Router LSAs : 0 Network LSAs : 0
Summary LSAs : 0 Asbr-summ LSAs : 0
Nssa ext LSAs : 0 Area opaque LSAs : 1
Total LSAs : 1 LSA Cksum Sum : 0xf493
Blackhole Range : False Unknown LSAs : 0
Export database : False
Export Policies : None
Export Fltrd LSAs: 0
Import Policies : None
Import Fltrd LSAs: 0
-------------------------------------------------------------------------------
Area Id: 2.2.2.2
-------------------------------------------------------------------------------
Area Id : 2.2.2.2 Type : Standard
Key Rollover Int.: 10 LFA : Include
Virtual Links : 1 Total Nbrs : 0
Active IFs : 0 Total IFs : 0
Area Bdr Rtrs : 0 AS Bdr Rtrs : 0
SPF Runs : 0 Last SPF Run : Never
Router LSAs : 0 Network LSAs : 0
Summary LSAs : 0 Asbr-summ LSAs : 0
Nssa ext LSAs : 0 Area opaque LSAs : 1
Total LSAs : 1 LSA Cksum Sum : 0xd6af
Blackhole Range : True Unknown LSAs : 0
Export database : False
Export Policies : None
Export Fltrd LSAs: 0
Import Policies : None
Import Fltrd LSAs: 0
===============================================================================
A:SetupCLI#
*A:Dut-B# show router ospf area 0.0.0.0 detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Area 0.0.0.0 (detail)
===============================================================================
-------------------------------------------------------------------------------
Configuration
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Type : Standard
-------------------------------------------------------------------------------
Statistics
-------------------------------------------------------------------------------
Virtual Links : 0 Total Nbrs : 2
Active IFs : 3 Total IFs : 3
Area Bdr Rtrs : 0 AS Bdr Rtrs : 0
SPF Runs : 7 Last SPF Run : 10/26/2006 10:09:18
Router LSAs : 3 Network LSAs : 3
Summary LSAs : 0 Asbr-summ LSAs : 0
Nssa ext LSAs : 0 Area opaque LSAs : 3
Total LSAs : 9 LSA Cksum Sum : 0x28b62
Blackhole Range : True Unknown LSAs : 0
Export database : False
Export Policies : None
Export Fltrd LSAs: 0
Import Policies : None
Import Fltrd LSAs: 0
===============================================================================
*A:Dut-B# show router ospf 0 area 0.0.0.0 lfa
=======================================================================
Rtr Base OSPFv2 Instance 0 Path Table
=======================================================================
Node Interface Nexthop
LFA Interface LFA Nexthop
-----------------------------------------------------------------------
10.20.1.1 to_Dut-A1 10.20.1.1
to_Dut-C1 10.20.1.3
10.20.1.3 to_Dut-C1 10.20.1.3
to_Dut-A1 10.20.1.1
10.20.1.4 to_Dut-D1 10.20.1.4
10.20.1.6 to_Dut-D1 10.20.1.4
to_Dut-C1 10.20.1.3
=======================================================================
*A:Dut-B#
*A:Dut-B# show router ospf 0 area 0.0.0.0 lfa detail
=======================================================================
Rtr Base OSPFv2 Instance 0 Path Table (detail)
=======================================================================
OSPF Area : 0.0.0.0
-----------------------------------------------------------------------
Node : 10.20.1.1 Metric : 10
Interface : to_Dut-A1 Nexthop : 10.20.1.1
LFA Interface : to_Dut-C1 LFA Metric : 20
LFA type : linkProtection LFA Nexthop : 10.20.1.3
Node : 10.20.1.3 Metric : 10
Interface : to_Dut-C1 Nexthop : 10.20.1.3
LFA Interface : to_Dut-A1 LFA Metric : 20
LFA type : linkProtection LFA Nexthop : 10.20.1.1
Node : 10.20.1.4 Metric : 10
Interface : to_Dut-D1 Nexthop : 10.20.1.4
Node : 10.20.1.6 Metric : 20
Interface : to_Dut-D1 Nexthop : 10.20.1.4
LFA Interface : to_Dut-C1 LFA Metric : 30
LFA type : nodeProtection LFA Nexthop : 10.20.1.3
=======================================================================
*A:Dut-B#
*A:Dut-C# show router ospf area lfa flex-algo 128
===============================================================================
Rtr Base OSPFv2 Instance 0 Flex-Algo 128 Path Table
===============================================================================
10.20.1.2 C1/1/5-B1/1/8 10.20.1.2
C1/1/7-E1/1/1 10.20.1.5
10.20.1.5 C1/1/7-E1/1/1 10.20.1.5
C1/1/5-B1/1/8 10.20.1.2
===============================================================================
*A:Dut-C#
area
Syntax
area [area-id] [detail] [ lfa]
Context
[Tree] (show>router>ospf3 area)
Full Context
show router ospf3 area
Description
This command displays configuration information about all areas or the specified area. When detail is specified operational and statistical information will be displayed.
Parameters
- area-id
-
Displays the OSPF area ID expressed in dotted decimal notation or as a 32-bit decimal integer.
- detail
-
Displays detailed information about the specified area.
- lfa
-
Displays Loop-Free Alternate (LFA) next-hop information. This information corresponds to the backup next hops for IP links and nodes written in RTM by the base LFA feature.
Platforms
7705 SAR Gen 2
Output
OSPF Area Output
The following table describes the standard and detailed command output fields for an OSPF area.
|
Label |
Description |
|---|---|
|
Area Id |
A 32 bit integer uniquely identifying an area. |
|
Type |
NSSA — This area is configured as an NSSA area. Standard — This area is configured as a standard area (not NSSA or Stub). Stub — This area is configured as a stub area. |
|
SPF Runs |
The number of times that the intra-area route table has been calculated using this area’s link state database. |
|
LSA Count |
The total number of link-state advertisements in this area’s link state database, excluding AS External LSAs. |
|
LSA Cksum Sum |
The 32-bit unsigned sum of the link-state database advertisements LS checksums contained in this area’s link state database. This checksum excludes AS External LSAs (type-5). |
|
No. of OSPF Areas |
The number of areas configured on the router. |
|
Virtual Links |
The number of virtual links configured through this transit area. |
|
Active IFs |
The active number of interfaces configured in this area. |
|
Area Bdr Rtrs |
The total number of ABRs reachable within this area. |
|
AS Bdr Rtrs |
The total number of ASBRs reachable within this area. |
|
Last SPF Run |
The time when the last intra-area SPF was run on this area. |
|
Router LSAs |
The total number of router LSAs in this area. |
|
Network LSAs |
The total number of network LSAs in this area. |
|
Summary LSAs |
The summary of LSAs in this area. |
|
Asbr-summ LSAs |
The summary of ASBR LSAs in this area. |
|
Nssa-ext LSAs |
The total number of NSSA-EXT LSAs in this area. |
|
Area opaque LSAs |
The total number of opaque LSAs in this area. |
|
Total Nbrs |
The total number of neighbors in this area. |
|
Total IFs |
The total number of interfaces configured in this area. |
|
Total LSAs |
The sum of LSAs in this area excluding autonomous system external LSAs. |
|
Blackhole Range |
False — No blackhole route is installed for aggregates configured in this area. True — A lowest priority blackhole route is installed for aggregates configured in this area. |
|
Export Database |
False — The extended TE Database (TE-DB) is not exported in this area. True — The extended TE Database (TE-DB) is exported in this area. |
|
Export Policies |
The export policies configured in this area. |
|
Export Fltrd LSAs |
The total number of LSAs filtered by area export policies. |
|
Import Policies |
The import policies configured in this area. |
|
Import Fltrd LSAs |
The total number of LSAs filtered by area import policies. |
A:SetupCLI# show router ospf 0 area detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Areas (detail)
===============================================================================
-------------------------------------------------------------------------------
Area Id: 0.0.0.0
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Type : Standard
Key Rollover Int.: 10 LFA : Include
Virtual Links : 0 Total Nbrs : 0
Active IFs : 0 Total IFs : 2
Area Bdr Rtrs : 0 AS Bdr Rtrs : 0
SPF Runs : 0 Last SPF Run : Never
Router LSAs : 0 Network LSAs : 0
Summary LSAs : 0 Asbr-summ LSAs : 0
Nssa ext LSAs : 0 Area opaque LSAs : 1
Total LSAs : 1 LSA Cksum Sum : 0xd6af
Blackhole Range : False Unknown LSAs : 0
Export Database : False
Export Policies : None
Export Fltrd LSAs: 0
Import Policies : None
Import Fltrd LSAs: 0
-------------------------------------------------------------------------------
Area Id: 1.1.1.1
-------------------------------------------------------------------------------
Area Id : 1.1.1.1 Type : Stub
Default Cost : 16777215 Import Summary : Send Summary
Key Rollover Int.: 10 LFA : Exclude
Virtual Links : 0 Total Nbrs : 0
Active IFs : 0 Total IFs : 1
Area Bdr Rtrs : 0 AS Bdr Rtrs : 0
SPF Runs : 0 Last SPF Run : Never
Router LSAs : 0 Network LSAs : 0
Summary LSAs : 0 Asbr-summ LSAs : 0
Nssa ext LSAs : 0 Area opaque LSAs : 1
Total LSAs : 1 LSA Cksum Sum : 0xf493
Blackhole Range : False Unknown LSAs : 0
Export database : False
Export Policies : None
Export Fltrd LSAs: 0
Import Policies : None
Import Fltrd LSAs: 0
-------------------------------------------------------------------------------
Area Id: 2.2.2.2
-------------------------------------------------------------------------------
Area Id : 2.2.2.2 Type : Standard
Key Rollover Int.: 10 LFA : Include
Virtual Links : 1 Total Nbrs : 0
Active IFs : 0 Total IFs : 0
Area Bdr Rtrs : 0 AS Bdr Rtrs : 0
SPF Runs : 0 Last SPF Run : Never
Router LSAs : 0 Network LSAs : 0
Summary LSAs : 0 Asbr-summ LSAs : 0
Nssa ext LSAs : 0 Area opaque LSAs : 1
Total LSAs : 1 LSA Cksum Sum : 0xd6af
Blackhole Range : True Unknown LSAs : 0
Export database : False
Export Policies : None
Export Fltrd LSAs: 0
Import Policies : None
Import Fltrd LSAs: 0
===============================================================================
A:SetupCLI#
*A:Dut-B# show router ospf area 0.0.0.0 detail
===============================================================================
Rtr Base OSPFv2 Instance 0 Area 0.0.0.0 (detail)
===============================================================================
-------------------------------------------------------------------------------
Configuration
-------------------------------------------------------------------------------
Area Id : 0.0.0.0 Type : Standard
-------------------------------------------------------------------------------
Statistics
-------------------------------------------------------------------------------
Virtual Links : 0 Total Nbrs : 2
Active IFs : 3 Total IFs : 3
Area Bdr Rtrs : 0 AS Bdr Rtrs : 0
SPF Runs : 7 Last SPF Run : 10/26/2006 10:09:18
Router LSAs : 3 Network LSAs : 3
Summary LSAs : 0 Asbr-summ LSAs : 0
Nssa ext LSAs : 0 Area opaque LSAs : 3
Total LSAs : 9 LSA Cksum Sum : 0x28b62
Blackhole Range : True Unknown LSAs : 0
Export database : False
Export Policies : None
Export Fltrd LSAs: 0
Import Policies : None
Import Fltrd LSAs: 0
===============================================================================
*A:Dut-B# show router ospf 0 area 0.0.0.0 lfa
=======================================================================
Rtr Base OSPFv2 Instance 0 Path Table
=======================================================================
Node Interface Nexthop
LFA Interface LFA Nexthop
-----------------------------------------------------------------------
10.20.1.1 to_Dut-A1 10.20.1.1
to_Dut-C1 10.20.1.3
10.20.1.3 to_Dut-C1 10.20.1.3
to_Dut-A1 10.20.1.1
10.20.1.4 to_Dut-D1 10.20.1.4
10.20.1.6 to_Dut-D1 10.20.1.4
to_Dut-C1 10.20.1.3
=======================================================================
*A:Dut-B#
*A:Dut-B# show router ospf 0 area 0.0.0.0 lfa detail
=======================================================================
Rtr Base OSPFv2 Instance 0 Path Table (detail)
=======================================================================
OSPF Area : 0.0.0.0
-----------------------------------------------------------------------
Node : 10.20.1.1 Metric : 10
Interface : to_Dut-A1 Nexthop : 10.20.1.1
LFA Interface : to_Dut-C1 LFA Metric : 20
LFA type : linkProtection LFA Nexthop : 10.20.1.3
Node : 10.20.1.3 Metric : 10
Interface : to_Dut-C1 Nexthop : 10.20.1.3
LFA Interface : to_Dut-A1 LFA Metric : 20
LFA type : linkProtection LFA Nexthop : 10.20.1.1
Node : 10.20.1.4 Metric : 10
Interface : to_Dut-D1 Nexthop : 10.20.1.4
Node : 10.20.1.6 Metric : 20
Interface : to_Dut-D1 Nexthop : 10.20.1.4
LFA Interface : to_Dut-C1 LFA Metric : 30
LFA type : nodeProtection LFA Nexthop : 10.20.1.3
=======================================================================
*A:Dut-B#
arp
arp
Syntax
arp {[ip-address] | [mac ieee-address] | [ sap sap-id] | [interface ip-int-name] | [ sdp sdp-id:vc-id] | [summary] }
Context
[Tree] (show>service>id arp)
Full Context
show service id arp
Description
This command displays the ARP cache entries for this service.
Parameters
- ip-address
-
Specifies the IP address in IP address dotted decimal notation.
- ieee-mac-address
-
Specifies the 48-bit MAC address in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
- sap-id
-
Specifies a Service Access Point (SAP) within a service.
- ip-int-name
-
Specifies the name of the IP interface. Interface names can be from 1 to 32 alphanumeric characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed between double quotes.
- sdp-id
-
Specifies the SDP identifier. Allowed values are integers in the range of 1 and 17407 for existing SDPs.
- vc-id
-
Specifies the virtual circuit identifier.
Platforms
7705 SAR Gen 2
Output
The following output is an example of service ID information. Output fields: service ID ARP describes the output fields.
Output ExampleA:ALA-A# show service id 100 base
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Type Age Interface Port
-------------------------------------------------------------------------------
10.1.0.1 00:00:66:66:66:01 Other 00h00m00s ies-10-101.1.0.1 1/1/4
239.1.1.2 00:00:5e:00:01:64 Other 00h00m00s ies-10-239.1.1.2 1/1/3
239.1.1.201 00:00:22:2e:a5:61 Static 00h00m00s ies-10-239.1.1.2 1/1/3
239.1.1.202 00:00:22:2e:a5:62 Static 00h00m00s ies-10-239.1.1.2 1/1/3
===============================================================================
A:ALA-A#
|
Label |
Description |
|---|---|
|
IP Address |
Specifies the IP address of the ARP cache entry. |
|
MAC Address |
Specifies the MAC address associated with the IP address. |
|
Type |
Other — Learned through normal ARP queries. Static — Configured by static-arp commands. Managed — Learned from DHCP snooping or configured by host commands. |
|
Age |
Indicates age of the ARP entry. |
|
Interface |
Indicates the name of the IP interface. |
|
Port |
Indicates the port upon which the entry was learned. |
arp
Syntax
arp {all | ip-address}
arp interface {ip-int-name | ip-address}
Context
[Tree] (clear>router arp)
Full Context
clear router arp
Description
This command clears all or specific ARP entries.
The scope of ARP cache entries cleared depends on the command line options specified.
Parameters
- all
-
Clears all ARP cache entries.
- ip-address
-
Clears the ARP cache entry for the specified IP address.
- ip-int-name
-
Clears all ARP cache entries for the IP interface with the specified name, up to 32 characters.
- ip-address
-
Clears all ARP cache entries for the specified IP interface with the specified IP address.
Platforms
7705 SAR Gen 2
arp
Syntax
arp
Context
[Tree] (clear>service>id arp)
Full Context
clear service id arp
Description
This command clears all ARP entries. This command is only valid for Ipipe and VPRN services.
Platforms
7705 SAR Gen 2
arp
Syntax
arp [{ip-int-name | ip-address[/mask] | mac ieee-mac-address | summary}] [arp-type]
Context
[Tree] (show>router arp)
Full Context
show router arp
Description
This command displays the router ARP table sorted by IP address. If no command line options are specified, all ARP entries are displayed.
Parameters
- ip-int-name
-
Only displays ARP entries associated with the specified IP interface name.
- ip-address[/mask]
-
Only displays ARP entries associated with the specified IP address and mask.
- ieee-mac-address
-
Only displays ARP entries associated with the specified MAC address.
- summary
-
Displays an abbreviate list of ARP entries.
- arp-type
-
Only displays ARP information associated with the keyword.
Platforms
7705 SAR Gen 2
Output
ARP Table Output — The following output is an example of router ARP table information, and Output fields: ARP describes the ARP table output fields.
Output Example*B:7710-Red-RR# show router arp
===============================================================================
ARP Table (Router: Base)
===============================================================================
IP Address MAC Address Expiry Type Interface
-------------------------------------------------------------------------------
10.20.1.24 00:16:4d:23:91:b8 00h00m00s Oth system
10.10.4.11 00:03:fa:00:d0:c9 00h57m03s Dyn[I] to-core-sr1
10.10.4.24 00:03:fa:41:8d:20 00h00m00s Oth[I] to-core-sr1
-------------------------------------------------------------------------------
No. of ARP Entries: 3
===============================================================================
A:ALA-A# show router ARP 10.10.0.3
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Expiry Type Interface
-------------------------------------------------------------------------------
10.10.0.3 04:5d:ff:00:00:00 00:00:00 Oth system
===============================================================================
A:ALA-A#
A:ALA-A# show router ARP to-ser1
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Expiry Type Interface
-------------------------------------------------------------------------------
10.10.13.1 04:5b:01:01:00:02 03:53:09 Dyn to-ser1
===============================================================================
A:ALA-A#
|
Label |
Description |
|---|---|
|
IP Address |
The IP address of the ARP entry |
|
MAC Address |
The MAC address of the ARP entry |
|
Expiry |
The age of the ARP entry |
|
Type |
Dyn — he ARP entry is a dynamic ARP entry Inv — the ARP entry is an inactive static ARP entry (invalid) Oth — the ARP entry is a local or system ARP entry Sta — the ARP entry is an active static ARP entry |
|
*Man |
The ARP entry is a managed ARP entry |
|
Int |
The ARP entry is an internal ARP entry |
|
[I} |
The ARP entry is in use |
|
Interface |
The IP interface name associated with the ARP entry |
|
No. of ARP Entries |
The number of ARP entries displayed in the list |
aspath-regex
aspath-regex
Syntax
aspath-regex reg-exp {detail | longer}
aspath-regex reg-exp
aspath-regex reg-exp hunt
Context
[Tree] (show>router>bgp>routes aspath-regex)
Full Context
show router bgp routes aspath-regex
Description
This command displays BGP routes with an AS path matching the specified regular expression.
aspath-regex is a parameter of the show router bgp routes command. Depending on the parameters that are used to issue the command, the output can display a narrower or wider set of routes, including routes belonging to other address families. See the show router bgp routes command description for syntax variants, parameter descriptions and values, and output examples.
Platforms
7705 SAR Gen 2
associations
associations
Syntax
associations
Context
[Tree] (show>router>dhcp>local-dhcp-server associations)
[Tree] (show>router>dhcp6>local-dhcp-server associations)
Full Context
show router dhcp local-dhcp-server associations
show router dhcp6 local-dhcp-server associations
Description
This command displays the interfaces associated with this DHCP or DHCP6 server.
Platforms
7705 SAR Gen 2
Output
The following output is an example of information associated with this DHCP or DHCP6 server.
Output Example*A:SUB-Dut-A# show router dhcp local-dhcp-server dhcpS1 associations
===============================================================================
DHCP server s1 router 3
===============================================================================
Associations Admin
-------------------------------------------------------------------------------
tosim5 Up
===============================================================================
*A:SUB-Dut-A#
*A:SUB-Dut-A# show router dhcp6 local-dhcp-server abc associations
===============================================================================
DHCP server abc router 3
===============================================================================
Associations Admin
-------------------------------------------------------------------------------
tosimxyz Up
===============================================================================
*A:SUB-Dut-A#
Output fields: DHCP summary describes DHCP associations fields.
|
Label |
Description |
|---|---|
|
Associations |
The entity associated with the local DHCP server |
|
Admin |
The administrative state |
associations
Syntax
associations
associations per-link-hash interface
associations per-link-hash class {1 | 2 | 3} interface
associations link-map-profile [link-map-profile] interface
associations per-link-hash [class {1 | 2| 3}] sap
associations link-map-profile [link-map-profile] sap
Context
[Tree] (show>lag associations)
Full Context
show lag associations
Description
This command displays LAG association information.
Parameters
- link-map-profile
-
Displays information about a specified LAG link map profile.
Platforms
7705 SAR Gen 2
auth-keychain
auth-keychain
Syntax
auth-keychain [keychain]
Context
[Tree] (show>router>bgp auth-keychain)
Full Context
show router bgp auth-keychain
Description
This command displays BGP sessions using a particular authentication keychain.
Parameters
- keychain
-
Specifies an existing keychain name.
Platforms
7705 SAR Gen 2
Output
The following output is an example of authentication keychain information.
Output Example*A:ALA-48# show router 2 bgp auth-keychain
===============================================================================
Sessions using key chains
===============================================================================
Peer address Group Keychain name
-------------------------------------------------------------------------------
10.20.1.3 1 eta_keychain1
30.1.0.2 1 eta_keychain1
===============================================================================
*A:ALA-48#
*A:ALA-48>config>router>bgp# show router bgp group "To_AS_10000"
===============================================================================
BGP Group : To_AS_10000
-------------------------------------------------------------------------------
Group : To_AS_10000
-------------------------------------------------------------------------------
Group Type : No Type State : Up
Peer AS : 10000 Local AS : 200
Local Address : n/a Loop Detect : Ignore
Import Policy : None Specified - Default Accept
Export Policy : ospf3
Hold Time : 90 Keep Alive : 30
Cluster Id : 0.0.0.100 Client Reflect : Enabled
NLRI : Unicast Preference : 170
TTL Security : Disabled Min TTL Value : n/a
Graceful Restart : Enabled Stale Routes Time: 360
Auth key chain : testname
List of Peers
- 10.0.0.8 :
To_Router B - EBGP Peer
Total Peers : 1 Established : 0
-------------------------------------------------------------------------------
Peer Groups : 1
===============================================================================
*A:ALA-48>config>router>bgp#
*A:ALA-48>config>router>bgp# show router bgp neighbor 10.0.0.8
===============================================================================
BGP Neighbor
-------------------------------------------------------------------------------
Peer : 10.0.0.8
Group : To_AS_10000
-------------------------------------------------------------------------------
Peer AS : 10000 Peer Port : 0
Peer Address : 10.0.0.8
Local AS : 200 Local Port : 0
Local Address : 0.0.0.0
Peer Type : External
State : Active Last State : Idle
Last Event : stop
Last Error : Cease
Local Family : IPv4
Remote Family : Unused
Hold Time : 90 Keep Alive : 30
Active Hold Time : 0 Active Keep Alive : 0
Cluster Id : 0.0.0.100
Preference : 99 Num of Flaps : 0
Recd. Paths : 0
IPv4 Recd. Prefixes : 0 IPv4 Active Prefixes : 0
IPv4 Suppressed Pfxs : 0 VPN-IPv4 Suppr. Pfxs : 0
VPN-IPv4 Recd. Pfxs : 0 VPN-IPv4 Active Pfxs : 0
Mc IPv4 Recd. Pfxs. : 0 Mc IPv4 Active Pfxs. : 0
Mc IPv4 Suppr. Pfxs : 0 IPv6 Suppressed Pfxs : 0
IPv6 Recd. Prefixes : 0 IPv6 Active Prefixes : 0
Input Queue : 0 Output Queue : 0
i/p Messages : 0 o/p Messages : 0
i/p Octets : 0 o/p Octets : 0
i/p Updates : 0 o/p Updates : 0
TTL Security : Disabled Min TTL Value : n/a
Graceful Restart : Enabled Stale Routes Time : 360
Advertise Inactive : Disabled Peer Tracking : Disabled
Advertise Label : None
Auth key chain : testname
Local Capability : RouteRefresh MP-BGP
Remote Capability :
Import Policy : None Specified - Default Accept
Export Policy : ospf3
-------------------------------------------------------------------------------
Neighbors : 1
===============================================================================
*A:ALA-48>config>router>bgp#
*A:ALA-48>config>router>bgp# show router bgp auth-keychain testname
=========================================================================
Sessions using key chain: keychain
=========================================================================
Peer address Group Keychain name
-------------------------------------------------------------------------
10.0.0.8 To_AS_10000 testname
=========================================================================
*A:ALA-48>config>router>bgp#
authentication
authentication
Syntax
authentication
Context
[Tree] (show>service>id authentication)
Full Context
show service id authentication
Description
Commands in this context show session authentication information.
Platforms
7705 SAR Gen 2
authentication
Syntax
authentication
Context
[Tree] (clear>service>id authentication)
Full Context
clear service id authentication
Description
Commands in this context clear session authentication information.
Platforms
7705 SAR Gen 2
authentication
Syntax
authentication
Context
[Tree] (show>router authentication)
Full Context
show router authentication
Description
This command enables the command to display authentication statistics.
Platforms
7705 SAR Gen 2
authentication
Syntax
authentication
Context
[Tree] (clear>router authentication)
Full Context
clear router authentication
Description
This command clears authentication related data.
Platforms
7705 SAR Gen 2
authentication
Syntax
authentication [statistics]
Context
[Tree] (show>system>security authentication)
Full Context
show system security authentication
Description
This command displays system login authentication configuration and statistics.
Parameters
- statistics
-
Appends login and accounting statistics to the display.
Platforms
7705 SAR Gen 2
Output
The following output is an example of authentication information.
Output fields: system security authentication describes system security authentication output fields.
Output ExampleA:ALA-4# show system security authentication statistics
============================================================================
Authentication sequence : radius tacplus ldap local
============================================================================
type status timeout (secs) retry count
server address
server name
----------------------------------------------------------------------------
radius up 3 3
192.168.0.10:1812
tacplus up 3 n/a
192.168.1.10:49
ldap up 3 3
10.1.1.1:389
----------------------------------------------------------------------------
radius admin/oper status : up/up
UDP port : 1812
tacplus admin/oper status : up/up
ldap admin/oper status : up/up
health check : enabled (interval 30 secs)
----------------------------------------------------------------------------
No. of Servers: 3
===============================================================================
Login Statistics
===============================================================================
server address conn accepted rejected
errors logins logins
-------------------------------------------------------------------------------
192.168.0.10 0 0 0
192.168.1.10 0 0 0
10.1.1.1 0 0 0
local n/a 0 0
===============================================================================
Authorization Statistics (TACACS+)
===============================================================================
server address conn sent rejected
errors pkts pkts
-------------------------------------------------------------------------------
192.168.1.10 0 0 0
===============================================================================
Accounting Statistics
===============================================================================
server address conn sent rejected
errors pkts pkts
-------------------------------------------------------------------------------
192.168.0.10 0 0 0
192.168.1.10 0 0 0
============================================================================
|
Label |
Description |
|---|---|
|
sequence |
The sequence in which authentication is attempted |
|
type |
The type of server |
|
status |
The status of the server |
|
timeout (secs) |
The number of seconds the system waits for a response from a server |
|
retry count |
The number of retry attempts to contact the server |
|
server address |
The IP address of the server |
|
server name |
The optional description of the server |
|
admin/oper status |
The administrative and operational status for each type, and RADIUS server ports in use |
|
health check |
Whether the servers are periodically monitored |
|
No. of Servers |
The total number of configured servers |
|
conn errors |
The number of connection errors |
|
accepted logins |
The number of logins accepted by the server |
|
rejected logins |
The number of logins rejected by the server |
|
sent pkts |
The number of packets sent |
|
rejected pkts |
The number of packets rejected |
authentication-server-check
authentication-server-check
Syntax
authentication-server-check server-address ip-address [port port] {{user-name user-name password password} | attr-from-file file-url} secret key [source-address ip-address] [timeout seconds] [ router router-instance | service-name service-name] nas-identifier nas-id [ debug]
Context
[Tree] (tools>perform>security authentication-server-check)
Full Context
tools perform security authentication-server-check
Description
This command is used to perform an authentication check on the RADIUS server.
Parameters
- server-address ip-address
-
Specifies the IP address of the RADIUS server.
- port
-
Specifies the port of the RADIUS server.
- user-name
-
Specifies the user name, up to 253 characters.
- password
-
Specifies the user password, up to 64 characters.
- file-url
-
Specifies to attach additional VSAs from a file.
- key
-
Specifies the secret key shared between the RADIUS client and server, up to 64characters.
- source address ip-address
-
Specifies the source address used for the access-request message.
- seconds
-
Specifies the time to wait for the RADIUS server response.
- router-instance
-
Specifies the router instance that should be used by the access request message.
- service-name
-
Specifies the service name that should be used by the access request message, up to 64 characters.
- nas-id
-
Specifies the NAS identifier, up to 64 characters.
- debug
-
Specifies to display the full debug message, including all VSAs and full hex sting, of the RADIUS reply message.
Platforms
7705 SAR Gen 2
auto-boot
auto-boot
Syntax
auto-boot {retry | terminate}
auto-boot echo [debugger]
no auto-boot echo [debugger]
Context
[Tree] (tools>perform auto-boot)
Full Context
tools perform auto-boot
Description
This command starts and stops the auto-boot process. It is also used to enable the display of auto-discovery information in the CLI.
This command can be used only if the auto-boot flag is enabled in the BOF.
The no form of this command disables the display of auto-discovery information.
Parameters
- retry
-
Executes the auto-boot process.
- terminate
-
Stops an ongoing auto-boot process.
- echo
-
Enables the display of auto-discovery information in the CLI.
- debugger
-
Includes debugging information in the displayed auto-discovery information.
Platforms
7705 SAR Gen 2
auto-boot
Syntax
auto-boot [detail]
auto-boot log
Context
[Tree] (tools>dump auto-boot)
Full Context
tools dump auto-boot
Description
This command displays auto-boot process information.
Parameters
- detail
-
Displays detailed information.
- log
-
Saves auto-boot process information to a log file.
Platforms
7705 SAR Gen 2
auto-disc
auto-disc
Syntax
auto-disc [hunt | detail] [rd rd] [community comm-id] [tag tag] [next-hop next-hop] [esi esi] [aspath-regex reg-exp]
Context
[Tree] (show>router>bgp>routes>evpn auto-disc)
Full Context
show router bgp routes evpn auto-disc
Description
This command displays BGP-EVPN auto discovery routes.
Parameters
- hunt
-
Displays entries for the specified route.
- detail
-
Displays detailed information.
- rd
-
Displays information for the route distinguisher.
- comm-id
-
Specifies the community ID, up to 72 characters.
- tag
-
Specifies the auto discovery route tag.
- next-hop
-
Specifies the IPv4 or IPv6 BGP next-hop address.
- esi
-
Specifies a 10-byte ESI by which to filter the displayed information. For example,ESI-0 | ESI-MAX or 00-11-22-33-44-55-66-77-88-99 with any of these separators('-',':',' ')
- reg-exp
-
Displays routes matching the specified regular expression, up to 80 characters.
Platforms
7705 SAR Gen 2
Output
The following output is an example of BGP-EVPN auto discovery route information, and Output fields: BGP route auto discovery describes the output fields.
Output Exampleshow router bgp routes evpn auto-disc rd 192.0.2.4:500 hunt===============================================================================
BGP Router ID:192.0.2.2 AS:64500 Local AS:64500
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
l - leaked, x - stale, > - best, b - backup, p - purge
Origin codes : i - IGP, e - EGP, ? - incomplete
===============================================================================
BGP EVPN Auto-Disc Routes
===============================================================================
-------------------------------------------------------------------------------
RIB In Entries
-------------------------------------------------------------------------------
Network : n/a
Nexthop : 2001:db8::4
Path Id : None
From : 2001:db8::4
Res. Nexthop : fe80::4446:ffff:fe00:142
Local Pref. : 100 Interface Name : int-PE-2-PE-4
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None IGP Cost : 10
Connector : None
Community : target:64500:500 l2-attribute:MTU: 1514 V: Double-VID M:
Default F: 1 C: 1 P: 0 B: 0 bgp-tunnel-encap:MPLS
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 192.0.2.4
Origin : IGP
Flags : Used Valid Best
Route Source : Internal
AS-Path : No As-Path
EVPN type : AUTO-DISC
ESI : ESI-0
Tag : 4
Route Dist. : 192.0.2.4:500
MPLS Label : LABEL 524273
Route Tag : 0
Neighbor-AS : n/a
DB Orig Val : N/A Final Orig Val : N/A
Source Class : 0 Dest Class : 0
Add Paths Send : Default
Last Modified : 02h16m32s
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
| Label | Description |
|---|---|
|
BGP Router ID |
Displays the BGP router ID |
|
AS |
Displays the AS |
|
Local AS |
Displays the local AS |
|
BGP EVPN Auto-Disc Routes |
|
|
RIB In Entries |
|
|
Network |
Displays the network name |
|
Nexthop |
Displays the next-hop IP address |
|
Path Id |
Displays the path ID value |
|
From |
Displays the from IP address |
|
Res. Nexthop |
Displays the reserved next-hop address |
|
Local Pref. |
Displays the local preference value |
|
Interface Name |
Displays the interface name |
|
Aggregator AS |
Displays the aggregatpr AS value |
|
Aggregator |
Displays the aggregator |
|
Atomic Aggr. |
Displays the atomic aggregator type |
|
MED |
Displays the MED value |
|
AIGP Metric |
Displays the AIGP metric value |
|
IGP Cost |
Displays the IGP cost value |
|
Connector |
Displays the connector value |
|
Community |
Displays the following values:
|
|
Cluster |
Displays the cluster type |
|
Originator Id |
Displays the originator ID |
|
Peer Router Id |
Displays the peer router IP address |
|
Origin |
Displays the origin type |
|
Flags |
Displays the flag type |
|
Route Source |
Displays the route source type |
|
AS-Path |
Displays the AS path type |
|
EVPN type |
Displays the EVPN type |
|
ESI |
Displays the ESI name |
|
Tag |
Displays the tag value |
|
Route Dist. |
Displays the route distinguisher |
|
MPLS Label |
Displays the MPLS label |
|
Route Tag |
Displays the route tag |
|
Neighbor-AS |
Displays the neighbor AS value |
|
DB Orig Val |
Displays the database originating value |
|
Final Orig Val |
Displays the final originating value |
|
Source Class |
Displays the source class value |
|
Dest Class |
Displays the destination class value |
|
Add Paths Send |
Displays the add paths send value |
|
Last Modified |
Displays the number of hours, minutes, and seconds since the last modification |
|
RIB Out Entries |
|
|
Routes |
Displays the number of routes |
auto-lsp
auto-lsp
Syntax
auto-lsp
Context
[Tree] (clear>router>mpls>lsp auto-lsp)
Full Context
clear router mpls lsp auto-lsp
Description
Commands in this context reset and restart all auto LSPs.
Platforms
7705 SAR Gen 2
auto-node-provisioning
auto-node-provisioning
Syntax
auto-node-provisioning
Context
[Tree] (tools>perform>system auto-node-provisioning)
Full Context
tools perform system auto-node-provisioning
Description
This command initiates auto-provisioning of the node on all ports that are operationally up but do not have an IP address.
Platforms
7705 SAR Gen 2
autoconfigure
autoconfigure
Syntax
autoconfigure
Context
[Tree] (clear>router autoconfigure)
Full Context
clear router autoconfigure
Description
Commands in this context clear IP autoconfiguration information.
Platforms
7705 SAR Gen 2
autoconfigure
Syntax
autoconfigure
Context
[Tree] (show router autoconfigure)
Full Context
show router autoconfigure
Description
Commands in this context display IP autoconfiguration information.
Platforms
7705 SAR Gen 2