q Commands
qos
qos
Syntax
qos
Context
[Tree] (clear qos)
Full Context
clear qos
Description
Commands in this context clear QoS statistics.
Platforms
7705 SAR Gen 2
qos
Syntax
qos
Context
[Tree] (show qos)
Full Context
show qos
Description
Commands in this context display QoS information.
Platforms
7705 SAR Gen 2
qos
Syntax
qos
Context
[Tree] (tools>dump qos)
Full Context
tools dump qos
Description
Commands in this context dump QoS information.
Platforms
7705 SAR Gen 2
qos
Syntax
qos
Context
[Tree] (monitor qos)
Full Context
monitor qos
Description
Commands in this context configure criteria to monitor QoS scheduler statistics for specific customers and SAPs.
Platforms
7705 SAR Gen 2
querier
querier
Syntax
querier
Context
[Tree] (show>service>id>mld-snooping querier)
Full Context
show service id mld-snooping querier
Description
This command displays information about the current querier.
Platforms
7705 SAR Gen 2
Output
The following output is an example of service MLD snooping querier information.
Output Example*A:rbae_C# show service id 1 mld-snooping querier
===============================================================================
MLD Snooping Querier info for service 1
===============================================================================
Sap Id : 2/1/5
IP Address : FE80:db8:12
Expires : 11s
Up Time : 0d 00:13:35
Version : 2
General Query Interval : 10s
Query Response Interval : 1.0s
Robust Count : 2
===============================================================================
*A:rbae_C#
querier
Syntax
querier
Context
[Tree] (show>service>id>igmp-snooping querier)
Full Context
show service id igmp-snooping querier
Description
This command displays information on the IGMP snooping queriers for the VPLS service.
Platforms
7705 SAR Gen 2
Output
Output Example*A:ALA-1>show>service>id>snooping# querier
===============================================================================
IGMP Snooping Querier info for service 10
===============================================================================
Sap Id : 1/1/1
IP Address : 10.10.10.1
Expires : 6s
Up Time : 0d 00:56:50
Version : 3
General Query Interval : 5s
Query Response Interval : 2.0s
Robust Count : 2
===============================================================================
*A:ALA-1>show>service>id>snooping#
Output fields: IGMP snooping queriers describes the show output fields.
Label |
Description |
|---|---|
SAP Id |
Specifies the SAP ID of the service. |
IP address |
Specifies the IP address of the querier. |
Expires |
The time left, in seconds, that the query will expire. |
Up time |
The length of time the query has been enabled. |
Version |
The configured version of IGMP. |
General Query Interval |
The frequency at which host-query packets are transmitted. |
Query Response Interval |
The time to wait to receive a response to the host-query message from the host. |
Robust Count |
Specifies the value used to calculate several IGMP message intervals. |
querier
Syntax
querier
Context
[Tree] (clear>service>id>igmp-snooping querier)
Full Context
clear service id igmp-snooping querier
Description
This command clears the information on the IGMP snooping queriers for the VPLS service.
Platforms
7705 SAR Gen 2
querier
Syntax
querier
Context
[Tree] (clear>service>id>mld-snooping querier)
Full Context
clear service id mld-snooping querier
Description
This command clears MLD snooping querier information.
Platforms
7705 SAR Gen 2
queue
queue
Syntax
queue queue-group queue-group-name port-id { ingress | egress} [id queue-id] [instance instance-id]
queue sap sap-id {ingress | egress} [id queue-id]
queue subscriber sub-ident-string [sla-profile sla-profile-name] {ingress | egress} [id queue-id]
Context
[Tree] (show>qos queue)
Full Context
show qos queue
Description
The show qos queue command outputs the Burst Control Group (BCG) name and slowest accurate visitation time for the specified queues.
For each queue specified, the system may find multiple hardware queues. This may be true for ingress queues on multipoint services (VPLS, IES, VPRN) or for queues created on an Ethernet Link Aggregation Group (LAG). When this is true, the show command displays the BCG name for each individual hardware queue.
The BCG name associated with a queue may be specified in the show bcg command to display the historical and current visitation time for the BCG managing the burst tolerance of the queue. If the output visitation time is greater (longer time) than the queue returned slowest accurate visitation time, the queue’s shaping rate may be negatively impacted.
Parameters
- queue-group-name port-id
Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues within the specified queue-group-name on the specified port-id. If the specified port-id is not provisioned on the system or the specified queue-group-name is not found on the port’s specified direction, the show command will fail.
- {ingress | egress}
Specifies the direction to display and are mutually exclusive.
- queue-id
Limits the return queues to a single queue-id.
- instance-id
Specifies which instance of a queue group with template queue-group-name to which this queue should be redirected. This parameter is only valid for queue groups on egress ports where policy-based redirection is required.
- sap-id
Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues within the specified sap-id. If the specified sap-id is not found, the show command will fail.
- sub-ident-string
Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified sub-ident-string. If the specified sub-ident-string does not exist, the show command will fail.
- sla-profile-name
Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified subscriber and sla-profile sla-profile-name. If the specified sla-profile-name does not exist, the show command will fail.
Platforms
7705 SAR Gen 2
queue-group
queue-group
Syntax
queue-group [queue-group-name] {ingress | egress} [{association | detail}]
queue-group summary
Context
[Tree] (show>qos queue-group)
Full Context
show qos queue-group
Description
This command displays queue-group information.
Parameters
- queue-group-name
Specifies the name of an existing queue group template up to 32 characters.
- ingress
Specifies whether the queue group name is an ingress policy.
- egress
Specifies whether the queue group name is an egress policy.
- association
Displays the entities associated with the specified queue group name.
- detail
Displays detailed queue group information for the specified queue group name.
- summary
Displays the total number of queue-group instances per card (IOM or XCM).
Platforms
7705 SAR Gen 2
Output
The following outputs are examples of queue group information.
Output Example*A:PE# show qos queue-group egress
===============================================================================
Queue Group Egress
===============================================================================
Group-Name Description
-------------------------------------------------------------------------------
qg1
_tmnx_nat_egr_q_grp NAT/LNS Egress Queue Group Template
policer-output-queues Default egress policer output queues.
_tmnx_nat_egr_q_grp_v2 NAT/LNS Egress Queue Group Template for ISAv2
_tmnx_lns_esm_egr_q_grp LNS ESM Egress Queue Group Template
-------------------------------------------------------------------------------
Egress Queue Groups : 5
-------------------------------------------------------------------------------
===============================================================================
*A:PE#
*A:PE# show qos queue-group egress "qg1" detail
===============================================================================
QoS Queue-Group Egress
===============================================================================
-------------------------------------------------------------------------------
QoS Queue Group
-------------------------------------------------------------------------------
Group-Name : qg1
Description : (Not Specified)
Queues HQoS Managed : True
HS Attachment Policy : default
-------------------------------------------------------------------------------
Queue Information
-------------------------------------------------------------------------------
Queue-Id : 1 Queue-Type : best-effort
Admin PIR : 50000 Admin CIR : 0
PIR Rule : closest CIR Rule : closest
CBS : def MBS : 1000 KB
Packet Byte Offset : add 0
Adv Config Policy : (Not Specified)
Parent : s1
PIR Level/Weight : 1/1 CIR Level/Weight : 0/1
Burst Limit : default
Wred Queue Mode : none Wred Queue SlopeUsage: not-applicable
Slope Policy : default
Dynamic MBS : enabled Queue Delay : not-applicable
High-Plus Drop Tail : def High Drop Tail : def
Low Drop Tail : def Exceed Drop Tail : def
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
HS Queue Information
-------------------------------------------------------------------------------
Queue-Id : 1
Admin PIR : 50000
PIR Rule : closest
MBS : 1000 KB
Packet Byte Offset : add 0
Burst Limit : default
HS Class Weight : 1 HS Wrr Weight : 1
HS Wred-Q Slope Plcy : _tmnx_hs_default
HS Alt Class Pool : False
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
HS Wrr Group Information
-------------------------------------------------------------------------------
HS Wrr Group Id : 1 Class Weight : 1
Rate : max Percent Rate : 100.00
PIR Adaptation Rule: closest
HS Wrr Group Id : 2 Class Weight : 1
Rate : max Percent Rate : 100.00
PIR Adaptation Rule: closest
-------------------------------------------------------------------------------
===============================================================================
Queue Group FC Mapping
===============================================================================
FC Name Queue-Id
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
===============================================================================
Queue Group Ports (access)
===============================================================================
Port Sched Pol Acctg Pol Stats Description QGrp-Instance
-------------------------------------------------------------------------------
5/1/1 0 No 1
-------------------------------------------------------------------------------
===============================================================================
Queue Group Ports (network)
===============================================================================
Port Sched Pol Policer-Ctrl-Pol Acctg Pol Stats Description QGrp-Instance
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
Qos Sap-Egress FC Group-Queue References
===============================================================================
Sap Policy FC Name Queue Id
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
Qos Sap-Egress FC Port-Redirect-Group-Queue References
===============================================================================
Sap Policy FC Name Queue Id
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
Queue Group Policer
===============================================================================
No Matching Entries
===============================================================================
*A:PE#
*A:PE# show qos queue-group ingress
===============================================================================
Queue Group Ingress
===============================================================================
Group-Name Description
-------------------------------------------------------------------------------
qg1
_tmnx_nat_ing_q_grp NAT/LNS Ingress Queue Group Template
_tmnx_nat_ing_q_grp_v2 NAT/LNS Ingress Queue Group Template for ISA*
_tmnx_lns_esm_ing_q_grp LNS ESM Ingress Queue Group Template
-------------------------------------------------------------------------------
Ingress Queue Groups : 4
-------------------------------------------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:PE#
*A:PE# show qos queue-group ingress "qg1" detail
===============================================================================
QoS Queue-Group Ingress
===============================================================================
-------------------------------------------------------------------------------
QoS Queue Group
-------------------------------------------------------------------------------
Group-Name : qg1
Description : (Not Specified)
-------------------------------------------------------------------------------
Q Mode CIR Admin PIR Admin CBS PIR Lvl/Wt Parent
CIR Rule PIR Rule MBS CIR Lvl/Wt BurstLimit(B)
Pkt Bt Ofst Adv Config Policy Name
Low Drop Tail
FIR Admin FIR Rule Cir-non-profiling
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
Queue Group Ports
===============================================================================
Port Sched Pol Acctg Pol Stats Description
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
Queue Group Sap FC Maps
===============================================================================
Sap Policy FC Name Queue (id type)
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
Queue Group FP Maps
===============================================================================
Card Num Fp Num Instance Type
-------------------------------------------------------------------------------
1 1 1 Access
-------------------------------------------------------------------------------
Entries found: 1
-------------------------------------------------------------------------------
===============================================================================
Queue Group Service Maps
===============================================================================
Service Id Service Type Instance
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
===============================================================================
Queue Group Policer
===============================================================================
Policer Id : 1
Description : (Not Specified)
PIR Adptn : closest CIR Adptn : closest
Parent : none Level : 1
Weight : 1 Adv. Cfg Plcy: none
Admin PIR : max Admin CIR : 0
CBS : def MBS : def
Hi Prio Only : def Pkt Offset : 0
Profile Capped : Disabled
StatMode : minimal
===============================================================================
*A:PE#
*A:PE# show qos queue-group summary
===============================================================================
Queue-group instances per card
===============================================================================
card port-acc-ing port-acc-egr port-nw-egr fp-acc-ing fp-nw-ing
-------------------------------------------------------------------------------
1 0 0 0 1 0
2 0 1 0 0 0
3 0 0 0 0 0
4 0 0 0 0 0
5 0 3 0 0 0
-------------------------------------------------------------------------------
Total ingress QG templates per system : 4
Total egress QG templates per system : 5
===============================================================================
*A:PE#
CIR Rule PIR Rule MBS CIR Lvl/Wt BurstLimit(B)
CIR Prcnt PIR Prcnt Low Drop Tail
queue-group
Syntax
queue-group queue-group-name egress access [instance instance-id] [egress-queue egress-queue-id] [interval seconds] [repeat repeat] [absolute | rate]
queue-group queue-group-name ingress access ingress-queue ingress-queue-id [interval seconds] [repeat repeat] [absolute | rate]
queue-group queue-group-name egress network instance instance-id [policer policer-id] [egress-queue egress-queue-id] [ interval seconds] [repeat repeat] [absolute | rate]
Context
[Tree] (monitor>port queue-group)
Full Context
monitor port queue-group
Description
This command enables queue-group monitoring for the specified parameters.
Parameters
- queue-group-name
Specifies the name of the queue-group up to 32 characters.
- access
Specifies the access type.
- network
Specifies the network type.
- instance-id
Specifies the identification of a specific instance of the queue group.
- policer-id
The specified policer ID must exist within the queue-group template applied to the ingress context of the forwarding plane.
- egress-queue-id
Monitors statistics fir this queue.
- ingress-queue-id
Monitors statistics for this queue.
- seconds
Configures the interval for each display, in seconds.
- repeat
Configures how many times the command is repeated.
- absolute
When the absolute keyword is specified, the raw statistics are displayed without processing. No calculations are performed on the delta or rate statistics.
- rate
When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the delta.
Platforms
7705 SAR Gen 2
queue-group
Syntax
queue-group [ingress | egress] [queue-group-name] [access | network [instance instance-id]
queue-group [ingress | egress] [queue-group-name] [access | network] associations [instance instance-id]
queue-group [ingress | egress] queue-group-name [access | network] [instance instance-id] queue-depth [queue queue-id]
queue-group [ingress | egress] [queue-group-name] [access | network] statistics [instance instance-id]
queue-group summary
Context
[Tree] (show>port queue-group)
Full Context
show port queue-group
Description
This command displays queue group information.
Parameters
- queue-group-name
Specifies the queue group name, up to 32 characters.
- statistics
Displays queue group port statistics.
- associations
Displays queue group port associations.
- summary
Displays summary information.
- instance-id
Specifies the identification of a specific instance of the queue group.
- queue-depth
Displays queue depth information for the specified queue group queue.
- queue-id
Specifies the queue ID.
Platforms
7705 SAR Gen 2