l Commands
l2-route-table
l2-route-table
Syntax
l2-route-table [detail] [bgp-ad] [multi-homing] [bgp-vpls] [bgp-vpws] [all-routes]
Context
[Tree] (show>service l2-route-table)
Full Context
show service l2-route-table
Description
This command displays Layer 2 route table information.
Parameters
- detail
-
Displays detailed information.
- bgp-ad
-
Displays BGP AD related information.
- multi-homing
-
Displays multihoming related information.
- bgp-vpls
-
Displays BGP VPLS related information.
- bgp-vpws
-
Displays BGP VPWS related information.
- all-routes
-
Displays active or inactive routes.
Platforms
7705 SAR Gen 2
Output
Use the following command to display Layer 2 route table information.
Output Exampleshow service l2-route-table
========================================================================
Services: L2 Route Information - Summary
========================================================================
Svc Id L2-Routes (RD-Prefix) Next Hop Origin
Sdp Bind Id PW Temp Id
------------------------------------------------------------------------
1000 *192.0.2.3:60002-192.0.2.3 192.0.2.3 BGP-L2
32766:4294967293 1
------------------------------------------------------------------------
No. of L2 Route Entries: 1
========================================================================
===============================================================================
Services: L2 Multi-Homing Route Information - Summary
===============================================================================
Svc Id L2-Routes (RD-Prefix) Next Hop SiteId State DF
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No. of L2 Multi-Homing Route Entries: 0
===============================================================================
========================================================
Services: L2 Bgp-Vpls Route Information - Summary
========================================================
Svc Id L2-Routes (RD) Next Hop Ve-Id
Sdp Bind Id PW Temp Id
--------------------------------------------------------
1001 *192.0.2.3:60003 192.0.2.3 3
32765:4294967292 1
--------------------------------------------------------
No. of L2 Bgp-Vpls Route Entries: 1
========================================================
========================================================
Services: L2 Bgp-Vpws Route Information - Summary
========================================================
Svc Id L2-Routes (RD) Next Hop Ve-Id
Sdp Bind Id PW Temp Id
--------------------------------------------------------
1002 *192.0.2.3:60004 192.0.2.3 3
32764:4294967291 1
--------------------------------------------------------
No. of L2 Bgp-Vpws Route Entries: 1
========================================================
show service l2-route-table bgp-vpls
========================================================
Services: L2 Bgp-Vpls Route Information - Summary
========================================================
Svc Id L2-Routes (RD) Next Hop Ve-Id
Sdp Bind Id PW Temp Id
--------------------------------------------------------
1001 *192.0.2.3:60003 192.0.2.3 3
32765:4294967292 1
--------------------------------------------------------
No. of L2 Bgp-Vpls Route Entries: 1
========================================================show service l2-route-table detail
===============================================================================
Services: L2 Route Information - Summary
===============================================================================
Svc Id : 1000
Origin : BGP-L2
PW Temp Id : 1
RD-Prefix : *192.0.2.3:60002-192.0.2.3
Next Hop : 192.0.2.3
Status : active
Sdp Bind Id : 32766:4294967293
===============================================================================
===============================================================================
Services: L2 Multi-Homing Route Information - Summary
===============================================================================
===============================================================================
===============================================================================
Services: L2 Bgp-Vpls Route Information - Summary
===============================================================================
Svc Id : 1001
VeId : 3
PW Temp Id : 1
RD : *192.0.2.3 : 60003
Next Hop : 192.0.2.3
State (D-Bit) : up(0)
Path MTU : 1514
Hash Label Tx : 1
Hash Label Rx : 1
Control Word : 0
Seq Delivery : 0
DF Bit : clear
Status : active
Sdp Bind Id : 32765:4294967292
===============================================================================
===============================================================================
Services: L2 Bgp-Vpws Route Information - Summary
===============================================================================
Svc Id : 1002
VeId : 3
PW Temp Id : 1
RD : *192.0.2.3:60004
Next Hop : 192.0.2.3
State (D-Bit) : up(0)
Path MTU : 1514
Hash Label Tx : 1
Hash Label Rx : 1
Control Word : 0
Seq Delivery : 0
Status : active
Tx Status : active
CSV : 0
Preference : 0
Sdp Bind Id : 32764:4294967291
===============================================================================
l2-route-table
Syntax
l2-route-table [detail] [bgp-ad] [multi-homing] [bgp-vpls] [bgp-vpws] [all-routes]
Context
[Tree] (show>service>id l2-route-table)
Full Context
show service id l2-route-table
Description
This command displays Layer 2 route table information.
Parameters
- detail
-
Displays detailed information.
- bgp-ad
-
Displays BGP-AD information.
- multi-homing
-
Displays multi-homing information.
- bgp-vpls
-
Displays BGP VPLS information.
- bgp-vpws
-
Displays BGP VPWS information.
- all-routes
-
Displays active or inactive routes.
Platforms
7705 SAR Gen 2
Output
Use the following command to display Layer 2 route table information.
Output Exampleshow service id 1 l2-route-table detail
===============================================================================
Services L2 Route Information Detail - Service 1
===============================================================================
-------------------------------------------------------------------------------
BGP Auto-discovery Information
-------------------------------------------------------------------------------
Admin State : Down
Vpls Id : 100.1.200.1:65535
Prefix : 10.20.1.3
-------------------------------------------------------------------------------
===============================================================================
Services: L2 Route Information - Service 1
===============================================================================
===============================================================================
===============================================================================
Services: L2 Multi-Homing Route Information - Summary
===============================================================================
===============================================================================
===============================================================================
Services: L2 Bgp-Vpls Route Information - Service 1
===============================================================================
VeId : 1
PW Temp Id : 20
RD : *10.20.1.1:1
Next Hop : 10.20.1.1
State (D-Bit) : up(0)
Path MTU : 0
Hash Label Tx : 1
Hash Label Rx : 1
Control Word : 0
Seq Delivery : 0
DF Bit : clear
Status : active
Sdp Bind Id : 32767:4294967295
VeId : 4
PW Temp Id : 20
RD : *10.20.1.6:1
Next Hop : 10.20.1.6
State (D-Bit) : up(0)
Path MTU : 0
Hash Label Tx : 1
Hash Label Rx : 1
Control Word : 0
Seq Delivery : 0
DF Bit : clear
Status : active
Sdp Bind Id : 32766:4294967292
===============================================================================
===============================================================================
Services: L2 Bgp-Vpws Route Information - Service 1
===============================================================================
===============================================================================
|
Label |
Description |
|---|---|
|
Admin State |
Displays the administrative state of the service Up — Indicates the service is administratively enabled Down — Indicates the service is administratively disabled |
|
Vpls Id |
Displays the Virtual Private LAN Service (VPLS) ID |
|
Prefix |
Displays information for the specified IP prefix and mask length |
|
VeId |
Displays the VEID for BGP-VPLS routes |
|
PW Temp Id |
Displays the Pseudowire (PW) temporary ID |
|
RD |
Displays information for the route distinguisher |
|
Next Hop |
Displays the next hop for the route |
|
State (D-Bit) |
Displays the state of the Disable-bit (D-bit).The D-bit ensures packet integrity between the terminal and host packet assembler/disassemblers |
|
Path MTU |
Displays the maximum transmission unit (MTU) of the path |
|
Hash Label Tx |
Displays the transmit hash label value |
|
Hash Label Rx |
Displays the receive hash label value |
|
Control Word |
Displays information about the control word. The control word is an optional 4-byte field used in the pseudowire packet |
|
Seq Delivery |
Displays information about sequence delivery |
|
DF Bit |
Displays information about the DF bit |
|
Status |
Displays the status of the service |
|
Sdp Bind Id |
Displays information about the SDP binding ID |
l2-vpn
l2-vpn
Syntax
l2-vpn [aspath-regex reg-exp] [community comm-id] [rd rd] [brief] [l2vpn-type] [veid veid] [offset vpls-base-offset] [siteid site-id]
l2-vpn [aspath-regex reg-exp] hunt [community comm-id] [rd rd] [brief] [l2vpn-type] [veid veid] [offset vpls-base-offset] [siteid site-id]
l2-vpn [detail | longer] [aspath-regex reg-exp] [community comm-id] [rd rd] [l2vpn-type] [veid veid] [offset vpls-base-offset] [siteid site-id]
Context
[Tree] (show>router>bgp>routes l2-vpn)
Full Context
show router bgp routes l2-vpn
Description
This command displays BGP flow L2-VPN routes.
Parameters
- reg-exp
-
Displays routes matching the specified regular expression, up to 80 characters.
- hunt
-
Displays entries for the specified route.
- comm-id
-
Specifies the community ID, up to 72 characters.
- rd
-
Displays information for the route distinguisher.
- brief
-
Displays the BGP flow L2-VPN route information in a brief format.
- l2vpn-type
-
Specifies a 12-byte Virtual Switch Instance identifier (VSI-ID) type.
- veid
-
Specifies a two byte identifier that represents the local bridging instance in a VPLS and is advertised through the BGP NLRI. This value must be lower than or equal to the max-ve-id.
- vpls-base-offset
-
Specifies a two byte identifier advertised through the NLRI that is used to indicate which VE-ID should use the advertised NLRI at the receiving PE according to the following rule: if the offset <= local VE-ID <= offset+VBS-1 (VBS = virtual block size = 8 in our implementation) then the NLRI is processed. Otherwise it is ignored. The NLRI with this offset is generated as soon as the first VE-ID value between (offset, offset + VBS-1) is advertised in the network.
- site-id
-
Specifies a two byte identifier usually employed for the BGP multi-homing solution. This value identifies the BGP multi-homing site associated with one or a set of objects (SAPs, pseudowires, or a combination). The site-id must be identical between the two PEs carrying the connection to the access device multi-homed to the PEs.
Platforms
7705 SAR Gen 2
l2pt
l2pt
Syntax
l2pt disabled
l2pt [detail]
Context
[Tree] (show>service>id l2pt)
Full Context
show service id l2pt
Description
This command displays Layer 2 Protocol Tunnel (L2-PT) route information associated with this service.
Parameters
- disabled
-
Displays only entries with termination disabled. This helps identify configuration errors.
- detail
-
Displays detailed information.
Platforms
7705 SAR Gen 2
Output
The following output is an example of service L2PT information.
Output ExampleA:ALA-48>show>service>id# l2pt
==============================================================================
L2pt summary, Service id 700
==============================================================================
L2pt-term L2pt-term Bpdu-trans Bpdu-trans Bpdu-trans Bpdu-trans
enabled disabled auto disabled pvst stp
------------------------------------------------------------------------------
SAP's 0 1 0 1 0 0
SDP's 0 1 0 1 0 0
------------------------------------------------------------------------------
Total 0 2 0 2 0 0
==============================================================================
A:ALA-48>show>service>id#
A:ALA-48>show>service>id# l2pt disabled
==============================================================================
L2pt details, Service id 700
==============================================================================
Service Access Points
------------------------------------------------------------------------------
SapId L2pt- Admin Bpdu- Oper Bpdu-
termination translation translation
------------------------------------------------------------------------------
1/1/9:0 disabled disabled disabled
------------------------------------------------------------------------------
Number of SAPs : 1
Service Destination Points
------------------------------------------------------------------------------
SdpId L2pt- Admin Bpdu- Oper Bpdu-
termination translation translation
------------------------------------------------------------------------------
2:222 disabled disabled disabled
------------------------------------------------------------------------------
Number of SDPs : 1
==============================================================================
L2pt summary, Service id 700
==============================================================================
L2pt-term L2pt-term Bpdu-trans Bpdu-trans Bpdu-trans Bpdu-trans
enabled disabled auto disabled pvst stp
------------------------------------------------------------------------------
SAP's 0 1 0 1 0 0
SDP's 0 1 0 1 0 0
------------------------------------------------------------------------------
Total 0 2 0 2 0 0
==============================================================================
A:ALA-48>show>service>id#
A:ALA-48>show>service>id# l2pt detail
==============================================================================
L2pt details, Service id 700
==============================================================================
Service Access Points
------------------------------------------------------------------------------
SapId L2pt- Admin Bpdu- Oper Bpdu-
termination translation translation
------------------------------------------------------------------------------
1/1/9:0 disabled disabled disabled
------------------------------------------------------------------------------
Number of SAPs : 1
Service Destination Points
------------------------------------------------------------------------------
SdpId L2pt- Admin Bpdu- Oper Bpdu-
termination translation translation
------------------------------------------------------------------------------
2:222 disabled disabled disabled
------------------------------------------------------------------------------
Number of SDPs : 1
==============================================================================
L2pt summary, Service id 700
==============================================================================
L2pt-term L2pt-term Bpdu-trans Bpdu-trans Bpdu-trans Bpdu-trans
enabled disabled auto disabled pvst stp
------------------------------------------------------------------------------
SAP's 0 1 0 1 0 0
SDP's 0 1 0 1 0 0
------------------------------------------------------------------------------
Total 0 2 0 2 0 0
==============================================================================
A:ALA-48>show>service>id#
Output fields: L2PT describes show L2PT output fields.
|
Label |
Description |
|---|---|
|
Service id |
Displays the 24 bit (0 to 16777215) service instance identifier for the service. |
|
L2pt-term enabled |
Indicates if L2-PT-termination and/or Bpdu-translation is in use in this service by at least one SAP or spoke-SDP binding. If in use, at least one of L2PT-termination or Bpdu-translation is enabled. When enabled it is not possible to enable STP on this service. |
|
L2pt-term disabled |
Indicates that L2-PT-termination is disabled. |
|
Bpdu-trans auto |
Specifies the number of L2-PT PDUs are translated before being sent out on a port or sap. |
|
Bpdu-trans disabled |
Indicates that Bpdu-translation is disabled. |
|
SAPs |
Displays the number of SAPs with L2PT or BPDU translation enabled or disabled. |
|
SDPs |
Displays the number of SDPs with L2PT or BPDU translation enabled or disabled. |
|
Total |
Displays the column totals of L2PT entities. |
|
SapId |
The ID of the access point where this SAP is defined. |
|
L2pt-termination |
Indicates whether L2pt termination is enabled or disabled. |
|
Admin Bpdu-translation |
Specifies whether Bpdu translation is administratively enabled or disabled. |
|
Oper Bpdu- translation |
Specifies whether Bpdu translation is operationally enabled or disabled. |
|
SdpId |
Specifies the SAP ID. |
l2pt
Syntax
l2pt
Context
[Tree] (clear>service>statistics>id l2pt)
Full Context
clear service statistics id l2pt
Description
This command clears the l2pt statistics for this service.
Platforms
7705 SAR Gen 2
label
label
Syntax
label start-label [end-label | in-use | owner]
Context
[Tree] (show>router>mpls-labels label)
Full Context
show router mpls-labels label
Description
This command displays MPLS labels exchanged.
Parameters
- start-label
-
Specifies the label value assigned at the ingress router.
- end-label
-
Specifies the label value assigned for the egress router.
- in-use
-
Specifies the number of in-use labels displayed.
Platforms
7705 SAR Gen 2
Output
The following output is an example of MPLS label information.
Output fields: MPLS label describes MPLS label output fields.
|
Label |
Description |
|---|---|
|
Label |
Displays the value of the label being displayed. |
|
Label Type |
Specifies whether the label value is statically or dynamically assigned. |
|
Label Owner |
The label owner. |
|
In-use labels in entire range |
The total number of labels being used by RSVP. |
*A:Atlanta 224>show>router>mpls-labels># label-range
============================================================================
Label Ranges
============================================================================
Label Type Start Label End Label Aging Available Total
----------------------------------------------------------------------------
Static 32 18431 - 18400 18400
Dynamic 18432 524287 0 505443 505856
Seg-Route 200501 200900 - 0 400
============================================================================
*A:SRU4>config>router>mpls# show router mpls label 202
=================================================================
MPLS Label 202
=================================================================
Label Label Type Label Owner
-----------------------------------------------------------------
202 static-lsp STATIC
-----------------------------------------------------------------
In-use labels in entire range : 5057
=================================================================
*A:SRU4>config>router>mpls#
label-ipv4
label-ipv4
Syntax
label-ipv4 [aspath-regex reg-exp] [community comm-id] [origin-val originState] [leaked] [leakable] [brief] [all]
label-ipv4 [aspath-regex reg-exp] hunt [community comm-id] [origin-val originState] [leaked] [leakable] [brief] [all]
label-ipv4 [detail | longer] [aspath-regex reg-exp [community comm-id] [origin-val originState] [leaked] [leakable] [all]
Context
[Tree] (show>router>bgp>routes label-ipv4)
Full Context
show router bgp routes label-ipv4
Description
This command displays BGP IPv4 routes.
Parameters
- reg-exp
-
Displays routes with an AS path matching the specified regular expression reg-exp, up to 80 characters.
- comm-id
-
Specifies community IDs, up to 72 characters.
- originState
-
Filters the BGP routes displayed by the command to those routes with a particular RPKI route origin validation state.
- hunt
-
Displays entries for the specified route.
- leaked
-
Filters the BGP routes displayed by the command to those routes leaked into this router’s BGP instance from another BGP instance.
- leakable
-
Filters the BGP routes displayed by the command to those routes eligible for leaking from this router’s BGP instance to another BGP instance.
- brief
-
Provides a summarized display of the set of peers to which a BGP route is advertised.
- longer
-
Displays the specified route and subsets of the route.
- detail
-
Display the longer, more detailed version of the output.
- all
-
Displays output for all label BGP IPv4 routes.
Platforms
7705 SAR Gen 2
label-ipv6
label-ipv6
Syntax
label-ipv6 [aspath-regex reg-exp] [ community comm-id] [ origin-val originState] [leaked] [ leakable] [brief] [ all]
label-ipv6 [aspath-regex reg-exp] hunt [community comm-id] [origin-val originState] [leaked] [leakable] [ brief] [all]
label-ipv6 [detail | longer] [aspath-regex reg-exp] [community comm-id] [origin-val originState] [leaked] [leakable] [ all]
Context
[Tree] (show>router>bgp>routes label-ipv6)
Full Context
show router bgp routes label-ipv6
Description
This command displays information about BGP IPv6 routes.
Parameters
- reg-exp
-
Displays routes with an AS path matching the specified regular expression reg-exp, up to 80 characters.
- comm-id
-
Specifies community IDs, up to 72 characters.
- originState
-
Filters the BGP routes displayed by the command to those routes with a particular RPKI route origin validation state.
- hunt
-
Displays entries for the specified route.
- leaked
-
Filters the BGP routes displayed by the command to those routes leaked into this router’s BGP instance from another BGP instance.
- leakable
-
Filters the BGP routes displayed by the command to those routes eligible for leaking from this router’s BGP instance to another BGP instance.
- brief
-
Provides a summarized display of the set of peers to which a BGP route is advertised.
- longer
-
Displays the specified route and subsets of the route.
- detail
-
Display the longer, more detailed version of the output.
- all
-
Displays output for all label BGP IPv6 routes.
Platforms
7705 SAR Gen 2
Output
The following output an example of BGP routes label IPv6 information.
Output Exampleshow router bgp routes label-ipv6 hunt
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
Network : 100::1/128
Nexthop : ::ffff:10.20.1.4
Path Id : None
To : 10.20.1.6
Res. Nexthop : n/a
Local Pref. : 100 Interface Name : NotAvailable
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : 1
AIGP Metric : None IGP Cost : n/a
Connector : None
Community : No Community Members
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.6
IPv6 Label : 2 (Ipv6 Explicit-Null) Label Type : POP
Lbl Allocation : EXPLICIT-NULL
Origin : IGP
AS-Path : No As-Path
Route Tag : 0
Neighbor-AS : n/a
Orig Validation: NotFound
Source Class : 0 Dest Class : 0
Prefix SID : index 2, originator-srgb [18450/16551]
-------------------------------------------------------------------------------
Routes : 1
show router bgp routes label-ipv6 detail
BGP Routes
===============================================================================
Original Attributes
Network : 100::1/128
Nexthop : ::ffff:10.10.13.1
Path Id : None
From : 10.10.13.1
Res. Nexthop : 10.10.13.1
Local Pref. : n/a Interface Name : to_A
Aggregator AS : None Aggregator : None
Atomic Aggr. : Not Atomic MED : None
AIGP Metric : None IGP Cost : 0
Connector : None
Community : No Community Members
Cluster : No Cluster Members
Originator Id : None Peer Router Id : 10.20.1.1
Fwd Class : None Priority : None
IPv6 Label : 524287
Flags : Used Valid Best IGP In-TTM In-RTM
Route Source : External
AS-Path : 100
Route Tag : 0
Neighbor-AS : 100
Orig Validation: NotFound
Source Class : 0 Dest Class : 0
Add Paths Send : Default
RIB Priority : Normal
Last Modified : 00h00m29s
label-range
label-range
Syntax
label-range
Context
[Tree] (show>router>mpls-labels label-range)
Full Context
show router mpls-labels label-range
Description
This command displays the MPLS label range.
Platforms
7705 SAR Gen 2
Output
The following output is an example of MPLS label range information.
Output fields: MPLS label range describes the MPLS label range output fields.
|
Label |
Description |
|---|---|
|
Label Type |
Displays the information about static-lsp, static-svc, and dynamic label types. |
|
Start Label |
The label value assigned at the ingress router. |
|
End Label |
The label value assigned for the egress router. |
|
Aging |
The number of labels released from a service which are transitioning back to the label pool. Labels are aged 15 s. |
|
Total Available |
The number of label values available. |
*A:Atlanta 224>show>router>mpls-labels># label-range
============================================================================
Label Ranges
============================================================================
Label Type Start Label End Label Aging Available Total
----------------------------------------------------------------------------
Static 32 18431 - 18400 18400
Dynamic 18432 524287 0 505443 505856
Seg-Route 200501 200900 - 0 400
===========================================================================
label-type
label-type
Syntax
label-type start-label start-label [end-label end-label] label-type [family]
Context
[Tree] (show>router>ldp>bindings label-type)
Full Context
show router ldp bindings label-type
Description
This command displays LDP FEC bindings by matching labels.
Parameters
- start-label
-
Specifies a label value to begin the display.
- end-label
-
Specifies a label value to end the display.
- family
-
Displays either IPv4 or IPv6 LDP information.
Platforms
7705 SAR Gen 2
labels
labels
Syntax
labels
Context
[Tree] (show>service>id labels)
Full Context
show service id labels
Description
This command displays the labels being used by the service.
Platforms
7705 SAR Gen 2
Output
The following output is an example of service label information.
Output ExampleA:ALA-12# show service id 1 labels
==============================================================================
Martini Service Labels
==============================================================================
Svc Id Sdp Id Type I.Lbl E.Lbl
------------------------------------------------------------------------------
1 10:1 Mesh 0 0
1 20:1 Mesh 0 0
1 30:1 Mesh 0 0
1 40:1 Mesh 130081 131061
1 60:1 Mesh 131019 131016
1 100:1 Mesh 0 0
------------------------------------------------------------------------------
Number of Bound SDPs : 6
------------------------------------------------------------------------------
A:ALA-12#
Output fields: service ID labels describes show service-id labels output fields:
|
Label |
Description |
|---|---|
|
Svc Id |
The service identifier |
|
Sdp Id |
The SDP identifier |
|
Type |
The SDP type, spoke or mesh |
|
I. Lbl |
The VC label used by the far-end device to send packets to this device in this service by the SDP |
|
E. Lbl |
The VC label used by this device to send packets to the far-end device in this service by the SDP |
lacp-partner
lacp-partner
Syntax
lacp-partner
lacp-partner detail
Context
[Tree] (show>lag lacp-partner)
Full Context
show lag lacp-partner
Description
This command displays LACP partner information.
Parameters
- detail
-
Displays detailed information.
Platforms
7705 SAR Gen 2
lag
lag
Syntax
lag [lag-id] [detail] [statistics]
lag [lag-id] [detail] [lacp-statistics]
lag [lag-id] description
lag [lag-id] egress-rate-distribution
lag [lag-id] port
lag lag-id associations per-link-hash interface [class {1 | 2 | 3}]
lag lag-id associations
lag lag-id bfd
lag lag-id [detail] eth-cfm [tunnel tunnel-id]
lag lag-id flow-distribution
lag lag-id associations per-link-hash interface
lag lag-id associations link-map-profile [link-map-profile] interface
lag lag-id lacp-partner
lag lag-id detail lacp-partner
lag lag-id link-map-profile link-map-profile
lag lag-id per-link-hash [class {1 | 2 | 3}]
lag lag-id associations per-link-hash sap [class {1 | 2 | 3}]
lag lag-id associations link-map-profile [link-map-profile] sap
lag lag-id per-link-hash port port-id
Context
[Tree] (show lag)
Full Context
show lag
Description
This command displays Link Aggregation Group (LAG) information.
If no command line options are specified, a summary listing of all LAGs is displayed.
Parameters
- lag-id
-
Displays only information on the specified LAG ID.
- detail
-
Keyword that displays detailed LAG information.
- statistics
-
Keyword that displays LAG statistics information.
- lacp-statistics
-
Keyword that displays the number of LACP PDUs transmitted and received per LAG port.
- description
-
Keyword that displays the user-defined description for the LAG.
- egress-rate-distribution
-
Keyword that displays the egress traffic rate in kb/s per LAG port.
- port
-
Keyword that displays port information.
- associations
-
Keyword that displays a list of current router interfaces to which the LAG is assigned.
- interface
-
Keyword that displays interface information.
- bfd
-
Keyword that displays per-member BFD information.
- eth-cfm
-
Keyword that displays a list of Ethernet tunnels to which the LAG is assigned.
- tunnel-id
-
Filters ETH-CFM MEP information to one tunnel.
- flow-distribution
-
Keyword that displays the flow distribution per active LAG port in a given LAG. The operator can control the flow distribution per LAG by configuring a hash-weight value on each ports of a LAG.
Inactive LAG ports are not displayed.
- per-link-hash
-
Keyword that displays information about a SAP or interface associated with this LAG sends traffic over a single link of a LAG auto-re-balancing as links are added and removed from this LAG.
- lacp-partner
-
Keyword that displays LACP partner information.
- link-map-profile
-
Displays information about a specified LAG link map profile.
- sap
-
Keyword that displays SAP information.
- port-id
-
Specifies the port ID.
Platforms
7705 SAR Gen 2
Output
The following outputs are examples of lag information, and the associated tables describe the output fields.
Output Example: show lagA:node-2# show lag
===============================================================================
Lag Data
===============================================================================
Lag-id Adm Opr Weighted Threshold Up-Count MC Act/Stdby
name
-------------------------------------------------------------------------------
1 up down No 0 0 active
lag-1
2 up down No 0 0 N/A
lag-2
-------------------------------------------------------------------------------
Total Lag-ids: 2 Single Chassis: 1 MC Act: 1 MC Stdby: 0
===============================================================================
Output fields: LAG describes the output fields for the show lag command.
|
Label |
Description |
|---|---|
|
Lag-id |
The LAG or multi-link bundle ID that the port is assigned to. |
|
Lag-name |
The LAG name. |
|
Adm |
Up — The LAG is administratively up. Down — The LAG is administratively down. |
|
Opr |
Up — The LAG is operationally up. Down—The LAG is operationally down. |
|
Threshold |
The number of operational links for the LAG at or below which the configured action is invoked. |
|
Up-Count |
The number of ports that are physically present and have physical links present. |
|
MC Act/Stdby |
Member port is selected as active or standby link. |
A:Dut-B# show lag 1 detail
===============================================================================
LAG Details
===============================================================================
Description : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 1 Mode : access
Lag-name : lag-1
Adm : up Opr : down
Thres. Last Cleared : 04/12/2021 12:21:41 Thres. Exceeded Cnt : 0
Dynamic Cost : false Encap Type : null
Configured Address : e2:e5:ff:00:01:41 Lag-IfIndex : 1342177281
Hardware Address : e2:e5:ff:00:01:41 Adapt Qos (access) : distribute
Hold-time Down : 0.0 sec Port Type : standard
Per-Link-Hash : disabled
Include-Egr-Hash-Cfg: disabled Forced : -
Per FP Ing Queuing : disabled Per FP Egr Queuing : disabled
Per FP SAP Instance : disabled
Access Bandwidth : N/A Access Booking Factor: 100
Access Available BW : 0
Access Booked BW : 0
LACP : enabled Mode : passive
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : disabled
MUX control : coupled
Subgrp hold time : 0.0 sec Remaining time : 0.0 sec
Subgrp selected : MC peer Subgrp candidate : -
Subgrp count : 1
System Id : e2:e5:ff:00:00:00 System Priority : 32768
Admin Key : 32768 Oper Key : 1
Prtr System Id : e2:f2:ff:00:00:00 Prtr System Priority : 1000
Prtr Oper Key : 32768
Standby Signaling : lacp
Port hashing : port-speed Port weight speed : 0 gbps
Ports Up : 0
Weights Up : 0 Hash-Weights Up : 0
Monitor oper group : N/A
Adaptive loadbal. : disabled Tolerance : N/A
MC Peer Address : 3.3.3.3 MC Peer Lag-id : 1
MC System Id : 00:00:00:00:00:01 MC System Priority : 100
MC Admin Key : 1 MC Active/Standby : standby
MC Lacp ID in use : true MC extended timeout : false
MC Selection Logic : local master decided
MC Config Mismatch : no mismatch
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
1/1/3 up standby down yes 1 - 32768
1/1/4 up standby down 1 - 32768
-------------------------------------------------------------------------------
Port-id Role Exp Def Dist Col Syn Aggr Timeout Activity
-------------------------------------------------------------------------------
1/1/3 actor No No No No No Yes Yes No
1/1/3 partner No No No No Yes Yes Yes Yes
1/1/4 actor No No No No No Yes Yes No
1/1/4 partner No No No No Yes Yes Yes Yes
===============================================================================
Output fields: LAG detail describes the output fields for the show lag lag-id detail command. The output is dependent on whether or not the LAG was configured as a multi-chassis (MC) LAG.
|
Label |
Description |
|---|---|
|
Lag-id |
The LAG identification. |
|
Lag-name |
The LAG name. |
|
Mode |
The LAG mode:
|
|
Adm |
Administrative state of the LAG. Up — The LAG is administratively up. Down — The LAG is administratively down. |
|
Opr |
Operational state of the LAG. Up — The LAG is operationally up. Down — The LAG is operationally down. |
|
Thres. Last Cleared |
The last time that port or weight thresholds were cleared:
Not cleared by the threshold cfg or deconfig command when the port or weight threshold is removed. The port or weight threshold can then be configured but not immediately reached. |
|
Thres. Exceeded Cnt |
The number of times that the weight or port threshold rising counter was reached. The Thresh. Exceed counter displays the rising counter, as the falling counter is only available via SNMP. When we configure or deconfigure the port or weight threshold, the Thresh. Exceed counter is set to 0. |
|
Dynamic Cost |
Enabled — Dynamic cost is enabled. Disabled — Dynamic cost is disabled. |
|
Encap Type |
The LAG port encapsulation type:
|
|
Configured Address |
The configured Ethernet MAC address. |
|
Lag-IfIndex |
A box-wide unique number assigned to this interface. |
|
Hardware Address |
The Ethernet MAC address. |
|
Adapt Qos (access) |
Displays the configured QoS mode:
|
|
Hold-Time Down |
The timer, in tenths of seconds, which controls the delay between detecting that a LAG is down and reporting it to the higher levels. |
|
Port Type |
The port type:
|
|
Per-Link-Hash |
Enabled — Per link hash is enabled. Disabled — Per link hash is disabled. |
|
Include-Egr-Hash-Cfg |
The explicitly configured hashing that is included to the egress buffering and rate distribution. |
|
Per FP Ing Queuing |
The per FP ingress queuing status. |
|
Per FP Egr Queuing |
The per FP egress queuing status. |
|
Per FP SAP Instance |
The per FP SAP instance status. |
|
Access Bandwidth |
The LAG access bandwidth value. |
|
Access Booking Factor |
The LAG access booking factor. |
|
Access Available BW |
The access available bandwidth. |
|
Access Booked BW |
The access booked bandwidth. |
|
LACP |
Enabled — LACP is enabled. Down — LACP is disabled. |
|
LACP Transmit Intvl |
The LACP transmit interval mode. |
|
LACP xmit stdby |
The LACP transmit standby mode. |
|
Selection Criteria |
Configured LAG selection criteria. |
|
Slave-to-partner |
The LACP slave-to-partner enabled or disabled state. |
|
MUX control |
Configured type of multiplexing machine control used in a LAG with LACP in active/passive modes. coupled — TX and RX activate together. independent — RX activates independent of TX. |
|
Subgrp hold time |
The sub-group hold time value. |
|
Remaining time |
The sub-group remaining time value. |
|
Subgrp selected |
The number of sub-group selected in this LAG. |
|
Subgrp candidate |
The sub-group candidate. |
|
Subgrp count |
The number of sub-group configured in this LAG. |
|
System Id |
System ID used by actor in LACP messages. |
|
System Priority |
System priority used by actor in LACP messages. |
|
Admin Key |
Configured LAG key. |
|
Oper Key |
Key used by actor in LACP messages. |
|
Prtr System Id |
System ID used by partner in LACP messages. |
|
Prtr System Priority |
System priority used by partner in LACP messages. |
|
Prtr Oper Key |
Key used by partner in LACP messages. |
|
Standby Signaling |
The standby signaling mode used in this LAG. |
|
Port hashing |
Displays the LAG port hashing mechanism for flow distribution per LAG port.
|
|
Port weight speed |
The LAG port weight speed value for mixed-speed LAG. |
|
Ports Up |
The number of ports that are operationally up for this LAG. |
|
Weights Up |
Sum of weights for ports that are operationally up in this LAG. |
|
Hash-Weights Up |
Sum of hash weights for ports that are operationally up in this LAG. |
|
Threshold Type |
The type of threshold used in this LAG:
|
|
Monitor oper group |
The name of the operational group being monitored for this LAG. |
|
Adaptive loadbal |
The adaptive load balancing status. Enabled — The adaptive load balancing is enabled. Disabled — The adaptive load balancing is disabled. |
|
Tolerance |
The adaptive load balancing tolerance value. |
|
Interval |
The adaptive load balancing statistics pooling interval. |
|
MC Peer Address |
The multi-chassis peer IP address. |
|
MC Peer Lag-id |
The LAG ID for the multi-chassis peer. |
|
MC System Id |
The multi-chassis LAG system identifier MAC address. |
|
MC System Priority |
The multi-chassis LAG system priority. |
|
MC Admin Key |
The multi-chassis LAG administrative key. |
|
MC Active/Standby |
The multi-chassis LAG active or standby state. |
|
MC Lacp ID in use |
The multi-chassis LAG in use state. |
|
MC extended timeout |
The multi-chassis LAG extended timeout value. |
|
MC Selection Logic |
The multi-chassis LAG selection logic state. |
|
MC Config Mismatch |
The multi-chassis LAG configuration mismatch state. |
===============================================================================
LAG Statistics
===============================================================================
-------------------------------------------------------------------------------
Lag-id : 1 Lag-name : lag-1
-------------------------------------------------------------------------------
Description : N/A
Port-id Input(Packets) Output(Packets)
Input(Bytes) Output(Bytes)
Input Errors Output Errors
-------------------------------------------------------------------------------
1/1/4 0 0
0 0
0 0
-------------------------------------------------------------------------------
Totals 0 0
0 0
0 0
===============================================================================
Output fields: LAG statistics describes the output fields for the show lag statistics command.
|
Label |
Description |
|---|---|
|
Lag-id |
The LAG or multi-link trunk (MLT) that the port is assigned to. |
|
Lag-name |
The LAG name. |
|
Port-id |
The port ID. |
|
Input Bytes |
The number of incoming bytes for the LAG on a per-port basis. |
|
Input Packets |
The number of incoming packets for the LAG on a per-port basis. |
|
Output Bytes |
The number of outbound bytes for the LAG on a per-port basis. |
|
Output Packets |
The number of outbound packets for the LAG on a per-port basis. |
|
Input/Output Errors |
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. |
|
Totals |
Displays the column totals for bytes, packets, and errors. |
A:node-2# show lag 1 egress-rate-distribution
===============================================================================
Distribution of egress rate by adaptive load balancing
===============================================================================
Port Egress-rate (kbps)
-------------------------------------------------------------------------------
8/1/71 43186
8/1/72 43186
8/1/73 38387
===============================================================================
Output fields: LAG egress rate distribution describes the output fields for the show lag <lag-id> egress-rate-distribution command.
|
Label |
Description |
|---|---|
|
Port |
The LAG member port. |
|
Egress-rate |
Total egress traffic rate of the LAG port from the last scan interval. |
A:node-2>config>lag# show lag 1 lacp-statistics
==============================================================================
LAG LACP Statistics
===============================================================================
LAG-id Port-id Tx Rx Rx Error Rx Illegal
(Pdus) (Pdus) (Pdus) (Pdus)
-------------------------------------------------------------------------------
1 1/1/3 20305 20291 0 0
1 1/1/4 20304 20292 0 0
1 1/1/13 20303 20284 0 0
1 1/1/14 20303 20284 0 0
-------------------------------------------------------------------------------
Totals 81215 81151 0 0
===============================================================================
Output fields: LAG LACP statistics describes the output fields for the show lag <lag-id> lacp-statistics command.
|
Label |
Description |
|---|---|
|
LAG-id |
The LAG ID that the port is assigned to. |
|
Port-id |
The port ID. |
|
Tx (Pdus) |
The number of LACP PDUs transmitted. |
|
Rx (Pdus) |
The number of LACP PDUs received. |
|
Rx Error (Pdus) |
The number of LACP PDUs received when admin-down or when LACP is not enabled. |
|
Rx Illegal (Pdus) |
The number of illegal packets received. |
A:Dut-A# show lag 3 flow-distribution
===============================================================================
Distribution of allocated flows
===============================================================================
Port Bandwidth (Gbps) Hash-weight Flow-share (%)
-------------------------------------------------------------------------------
1/1/1 10.000 300 37.50
1/1/2 10.000 500 62.50
-------------------------------------------------------------------------------
Total operational bandwidth: 20.000
===============================================================================
Output fields: LAG flow distribution describes the output fields for the show lag flow-distribution command.
|
Label |
Description |
|---|---|
|
Bandwidth |
The physical bandwidth speed per active LAG port. |
|
Hash-Weight |
The hash-weight value configured or inherited from port-speed on this LAG port. |
|
Flow-Share |
The traffic flow distribution per active LAG port. |
A:ALA-1# show lag 5 associations
==============================================================================
Interface Table
==============================================================================
Router/ServiceId Name Encap Val
------------------------------------------------------------------------------
Router: Base LAG2West 0
------------------------------------------------------------------------------
Interfaces
==============================================================================
A:ALA-1#
Output fields: LAG associations describes the output fields for the show lag <lag-id> associations command.
|
Label |
Description |
|---|---|
|
Service ID |
The service associated with the LAG. |
|
Name |
The name of the IP interface. |
|
Encap Val |
The Dot1q or QinQ values of the port for the IP interface. |
A:Dut-C# show lag 1 detail
===============================================================================
LAG Details
===============================================================================
Description : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 1 Mode : access
Adm : up Opr : up
Thres. Last Cleared : 09/16/2019 23:27:40 Thres. Exceeded Cnt : 2
Dynamic Cost : false Encap Type : null
Configured Address : 10:0e:ff:00:01:41 Lag-IfIndex : 1342177281
Hardware Address : 10:0e:ff:00:01:41 Adapt Qos (access) : distribute
Hold-time Down : 0.0 sec Port Type : standard
Per-Link-Hash : disabled
Include-Egr-Hash-Cfg: disabled Forced : -
Per FP Ing Queuing : disabled Per FP Egr Queuing : disabled
Per FP SAP Instance : disabled
Access Bandwidth : N/A Access Booking Factor: 100
Access Available BW : 0
Access Booked BW : 0
LACP : enabled Mode : passive
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : disabled
MUX control : coupled
Subgrp hold time : 1.0 sec Remaining time : 0.0 sec
Subgrp selected : 2 Subgrp candidate : -
Subgrp count : 1
System Id : 10:0e:ff:00:00:00 System Priority : 32768
Admin Key : 32768 Oper Key : 1
Prtr System Id : 1e:0e:ff:00:00:00 Prtr System Priority : 32768
Prtr Oper Key : 32768
Standby Signaling : lacp
Port hashing : port-speed Port weight speed : 0 gbps
Ports Up : 2
Weights Up : 2 Hash-Weights Up : 2
Threshold Type : hash-weight-threshold
Value : 1
Action : down
Cost : N/A
Monitor oper group : N/A
MC Peer Address : 2.2.2.2 MC Peer Lag-id : 1
MC System Id : 00:00:00:00:00:01 MC System Priority : 100
MC Admin Key : 1 MC Active/Standby : active
MC Lacp ID in use : true MC extended timeout : false
MC Selection Logic : local master decided
MC Config Mismatch : no mismatch
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
1/1/13 up active up yes 2 - 32768
1/1/14 up active up 2 - 32768
-------------------------------------------------------------------------------
Port-id Role Exp Def Dist Col Syn Aggr Timeout Activity
-------------------------------------------------------------------------------
1/1/13 actor No No Yes Yes Yes Yes Yes No
1/1/13 partner No No Yes Yes Yes Yes Yes Yes
1/1/14 actor No No Yes Yes Yes Yes Yes No
1/1/14 partner No No Yes Yes Yes Yes Yes Yes
===============================================================================
A:ALU-Dut1# show lag 3 lacp-partner
===============================================================================
LAG Partner information
===============================================================================
Partner system ID : ea:3e:ff:00:00:00
Partner system priority : 32768
Partner operational key : 2
===============================================================================
===============================================================================
LAG 3 Ports Partner operational information
===============================================================================
Port Actor Port Prio Key
port
-------------------------------------------------------------------------------
1/1/52 33908 33909 5 2
1/1/54 33910 33911 5 2
1/1/56 33912 33913 7 2
===============================================================================
===============================================================================
LAG 3 Ports Partner operational state information
===============================================================================
Port Exp Def Dist Col Syn Aggr Time Act
out
-------------------------------------------------------------------------------
1/1/52 No No Yes Yes Yes Yes Yes Yes
1/1/54 No No Yes Yes Yes Yes Yes Yes
1/1/56 No No No No No Yes Yes Yes
===============================================================================
A:ALU-Dut1#
A:Dut-A# show lag 10 lacp-neighbors
===============================================================================
LAG Neighbor information
===============================================================================
Partner system ID : de:41:ff:00:00:00
Partner system priority : 32768
Partner operational key : 32768
===============================================================================
-------------------------------------------------------------------------------
LAG port 1/1/6 partner information
-------------------------------------------------------------------------------
Actor port : 33862
Partner admin system prio : 32768
Partner oper system prio : 32768
Partner admin system ID : 00:00:00:00:00:00
Partner oper system ID : de:41:ff:00:00:00
Partner admin key : 0
Partner oper key : 32768
Partner admin port : (Not Specified)
Partner oper port : 33863
Partner admin port prio : 32768
Partner oper port prio : 32768
Partner admin state : (Not Specified)
Partner oper state : lacp-timeout aggregation synchronization
collecting distributing
===============================================================================
A:Dut-A#
*A:bksim4001>config>lag# selection-criteria highest-weight subgroup-hold-
time 1show lag 1 detail
ght subgroup-hold-time 10
===============================================================
LAG Details
===============================================================
Description : To Sim4002
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 1 Mode : access
Adm : down Opr : down
Thres. Exceeded Cnt : 0 Port Threshold : 0
Thres. Last Cleared : 01/21/2014 09:00:48 Threshold Action : down
Dynamic Cost : false Encap Type : null
Configured Address : 36:95:ff:00:01:41 Lag-IfIndex : 1342177281
Hardware Address : 36:95:ff:00:01:41 Adapt Qos (access) : distribute
Hold-time Down : 0.0 sec Port Type : standard
Per-Link-Hash : disabled
Include-Egr-Hash-Cfg: enabled
Per FP Ing Queuing : disabled Per FP Egr Queuing : disabled
Per FP SAP Instance : disabled
LACP : enabled Mode : passive
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-weight Slave-to-partner : disabled
Subgrp hold time : 20.0 sec Remaining time : 2.6 sec
Subgrp selected : 1 Subgrp candidate : 2
Subgrp count : 2 Forced : -
System Id : 36:95:ff:00:00:00 System Priority : 32768
Admin Key : 32768 Oper Key : 32768
Prtr System Id : Prtr System Priority : 0
Prtr Oper Key : 0
Standby Signaling : lacp
Port weight (gbps) : (Not Specified)
Weight Threshold : 0 Threshold Action : down
...
===============================================================================
*A:Dut-A# show lag 2 associations per-link-hash sap
===============================================================================
SAP Associations
===============================================================================
SvcId SAP Active Link Oper Oper
Class Weight
-------------------------------------------------------------------------------
2 lag-2:4 1/1/1 1 500
2 lag-2:5 1/1/1 1 100
2 lag-2:6 1/1/26 1 1000
2 lag-2:7 1/1/25 1 1000
===============================================================================
Number of SAP associations: 4
A:bksim4001# show lag 1 per-link-hash
===============================================================================
Per-link-hash Weight
===============================================================================
Port Class Num Users Agg Weight
-------------------------------------------------------------------------------
1/1/1 1 10 10
1/1/1 2 0 0
1/1/1 3 2 500
===============================================================================
Number of entries: 3
===============================================================================
lag
Syntax
lag lag-id bfd-session family {ipv4 | ipv6} lag-port port-id
lag lag-id lacp-statistics
lag lag-id statistics [aggregate-queue]
Context
[Tree] (clear lag)
Full Context
clear lag
Description
This command clears statistics for the specified LAG ID.
Parameters
- lag-id
-
Clears the LAG ID.
- bfd-session
-
Keyword that clears the specified BFD session.
- family
-
Keyword that clears the IP address family.
- ipv4
-
Keyword that clears IPv4.
- ipv6
-
Keyword that clears IPv6.
- port-id
-
Clears the port ID.
- lacp-statistics
-
Keyword that clears the LACP PDUs statistics.
- statistics
-
Keyword that clears the statistics or the BFD session for the specified LAG ID.
- aggregate-queue
-
Keyword that clears the aggregate queue statistics on a PXC-based LAG.
Platforms
7705 SAR Gen 2
lag
Syntax
lag lag-id lag-id
Context
[Tree] (tools>dump lag)
Full Context
tools dump lag
Description
This command dumps LAG information.
Parameters
- lag-id
-
Specifies the LAG ID.
Platforms
7705 SAR Gen 2
lag
Syntax
lag
Context
[Tree] (tools>perform lag)
Full Context
tools perform lag
Description
This command provides tools for controlling LAG.
Platforms
7705 SAR Gen 2
lag
Syntax
lag lag-id [lag-id] [bytes | packets | errors | utilization] [interval seconds] [repeat repeat] [absolute | rate]
lag lag-id network-aggregate-qos-stats [interval seconds] [ repeat repeat] [absolute | rate]
Context
[Tree] (monitor lag)
Full Context
monitor lag
Description
This command monitors traffic statistics for Link Aggregation Group (LAG) ports. Statistical information for the specified LAG ID(s) displays at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified LAG ID. The subsequent statistical information listed for each interval is displayed as a delta to the previous display. When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
Parameters
- lag-id
-
Specifies the number of the LAG, with a maximum of five LAG numbers specified in a single statement.
- bytes
-
Keyword that displays the statistics in bytes only.
- packets
-
Keyword that displays the statistics in packets only.
- errors
-
Keyword that displays the statistics for errors only.
- utilization
-
Keyword that displays the statistics in percentage utilization only.
- network-aggregate-qos-stats
-
Keyword that displays the aggregate QoS statistics on network interface LAG default ingress and egress queues.
- seconds
-
Configures the interval for each display in seconds.
- repeat
-
Configures how many times the command is repeated.
- absolute
-
Keyword that displays the raw statistics, without processing. No calculations are performed on the delta or rate statistics.
- rate
-
Keyword that displays the rate-per-second for each statistic instead of the delta.
Platforms
7705 SAR Gen 2
Output
The following output is an example of monitor lag command information.
Output ExampleA:Dut-B# monitor lag 1 interval 3 repeat 1
===============================================================================
Monitor statistics for LAG ID 1
===============================================================================
Port-id Input packets Output packets
Input bytes Output bytes
Input errors [Input util %] Output errors [Output util %]
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
1/2/1 24 25
2224 2294
0 0
1/2/2 25 8
2170 776
0 0
-------------------------------------------------------------------------------
Totals 49 33
4394 3070
0 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Delta)
-------------------------------------------------------------------------------
1/2/1 3 3
306 306
0 0
1/2/2 0 0
0 0
0 0
-------------------------------------------------------------------------------
Totals 3 3
306 306
0 0
===============================================================================
A:Dut-B# monitor lag 1 interval 3 repeat 1 bytes
===============================================================================
Monitor statistics for LAG ID 1
===============================================================================
Port-id Input bytes Output bytes
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
1/2/1 6100 6170
1/2/2 2514 1120
-------------------------------------------------------------------------------
Totals 8614 7290
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Delta)
-------------------------------------------------------------------------------
1/2/1 306 306
1/2/2 0 0
-------------------------------------------------------------------------------
Totals 306 306
===============================================================================
The following output is an example of network aggregate QoS statistics information.
Output Example*A:PE# monitor lag 1 network-aggregate-qos-stats repeat 1
===============================================================================
Monitor Network Aggregate QoS Statistics for LAG ID 1
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ingress Queue 1 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 0 0
Out Profile dropped : 0 0
Ingress Queue 2 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 0 0
Out Profile dropped : 0 0
Ingress Queue 11 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 0 0
Out Profile dropped : 0 0
Egress Queue 1 Packets Octets
In/Inplus Prof fwded : 0 0
In/Inplus Prof dropped: 0 0
Out/Exc Prof fwded : 0 0
Out/Exc Prof dropped : 0 0
Egress Queue 2 Packets Octets
In/Inplus Prof fwded : 0 0
In/Inplus Prof dropped: 0 0
Out/Exc Prof fwded : 0 0
Out/Exc Prof dropped : 0 0
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Delta)
-------------------------------------------------------------------------------
Ingress Queue 1 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 2124815 271976320
Out Profile dropped : 0 0
Ingress Queue 2 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 0 0
Out Profile dropped : 0 0
Ingress Queue 11 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 0 0
Out Profile dropped : 0 0
Egress Queue 1 Packets Octets
In/Inplus Prof fwded : 0 0
In/Inplus Prof dropped: 0 0
Out/Exc Prof fwded : 1109568 1420247040
Out/Exc Prof dropped : 0 0
Egress Queue 2 Packets Octets
In/Inplus Prof fwded : 0 0
In/Inplus Prof dropped: 0 0
Out/Exc Prof fwded : 0 0
Out/Exc Prof dropped : 0 0
===============================================================================
*A:PE# monitor lag 1 network-aggregate-qos-stats rate repeat 1
===============================================================================
Monitor Network Aggregate QoS Statistics for LAG ID 1
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ingress Queue 1 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 0 0
Out Profile dropped : 0 0
Ingress Queue 2 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 0 0
Out Profile dropped : 0 0
Ingress Queue 11 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 0 0
Out Profile dropped : 0 0
Egress Queue 1 Packets Octets
In/Inplus Prof fwded : 0 0
In/Inplus Prof dropped: 0 0
Out/Exc Prof fwded : 0 0
Out/Exc Prof dropped : 0 0
Egress Queue 2 Packets Octets
In/Inplus Prof fwded : 0 0
In/Inplus Prof dropped: 0 0
Out/Exc Prof fwded : 0 0
Out/Exc Prof dropped : 0 0
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Rate)
-------------------------------------------------------------------------------
Packets/sec Octets/sec % Port
Util.
Ingress Queue 1 Packets Octets
In Profile forwarded : 0 0 0.00
In Profile dropped : 0 0 0.00
Out Profile forwarded : 97675 12502383 1.00
Out Profile dropped : 0 0 0.00
Ingress Queue 2 Packets Octets
In Profile forwarded : 0 0 0.00
In Profile dropped : 0 0 0.00
Out Profile forwarded : 0 0 0.00
Out Profile dropped : 0 0 0.00
Ingress Queue 11 Packets Octets
In Profile forwarded : 0 0 0.00
In Profile dropped : 0 0 0.00
Out Profile forwarded : 0 0 0.00
Out Profile dropped : 0 0 0.00
Egress Queue 1 Packets Octets
In/Inplus Prof fwded : 0 0 0.00
In/Inplus Prof dropped: 0 0 0.00
Out/Exc Prof fwded : 0 0 0.00
Out/Exc Prof dropped : 0 0 0.00
Egress Queue 2 Packets Octets
In/Inplus Prof fwded : 0 0 0.00
In/Inplus Prof dropped: 0 0 0.00
Out/Exc Prof fwded : 97661 12500639 1.00
Out/Exc Prof dropped : 0 0 0.00
===============================================================================
ldp
ldp
Syntax
ldp
Context
[Tree] (clear>router ldp)
Full Context
clear router ldp
Description
Commands in this context set the hold-time during which new auto-rx targeted peers are not generated.
Platforms
7705 SAR Gen 2
ldp
Syntax
ldp
Context
[Tree] (show>router ldp)
Full Context
show router ldp
Description
This command displays LDP information.
Platforms
7705 SAR Gen 2
ldp
Syntax
ldp
Context
[Tree] (tools>dump>router ldp)
Full Context
tools dump router ldp
Description
Commands in this context dump tools for LDP protocol instance.
Platforms
7705 SAR Gen 2
ldp
Syntax
ldp
Context
[Tree] (monitor>router ldp)
Full Context
monitor router ldp
Description
This command monitors commands for the LDP instance.
Platforms
7705 SAR Gen 2
ldp fec-egress-statistics
ldp fec-egress-statistics
Syntax
ldp fec-egress-statistics [ip-prefix/mask]
Context
[Tree] (clear>router ldp fec-egress-statistics)
Full Context
clear router ldp fec-egress-statistics
Description
This command clears LDP FEC egress statistics.
Parameters
- ip-prefix
-
Specify information for the specified IP prefix. Host bits must be 0.
- mask
-
Specifies the address mask used to indicate the bits of an IP address that are being used for the subnet address.
Platforms
7705 SAR Gen 2
ldp-sync-exit
ldp-sync-exit
Syntax
ldp-sync-exit
Context
[Tree] (tools>perform>router>isis ldp-sync-exit)
Full Context
tools perform router isis ldp-sync-exit
Description
This command terminates LDP synchronization and restores actual cost of an ISIS interface.
Platforms
7705 SAR Gen 2
ldp-sync-exit
Syntax
ldp-sync-exit
Context
[Tree] (tools>perform>router>ospf3 ldp-sync-exit)
[Tree] (tools>perform>router>ospf ldp-sync-exit)
Full Context
tools perform router ospf3 ldp-sync-exit
tools perform router ospf ldp-sync-exit
Description
This command terminates LDP synchronization and restore actual cost of an OSPF interface.
Platforms
7705 SAR Gen 2
lease-state
lease-state
Syntax
lease-state [wholesaler service-id] [sap sap-id | sdp sdp-id:vc-id | interface interface-name | ip-address ip-address [/mask] | chaddr ieee-address | mac ieee-address | {[port port-id] [no-inter-dest-id | inter-dest-id inter-dest-id]}] [session { none | ipoe}] [detail]
Context
[Tree] (show>service>id>dhcp lease-state)
Full Context
show service id dhcp lease-state
Description
This command displays DHCP lease state related information.
Parameters
- service-id
-
Specifies the service ID of the wholesaler.
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- sdp-id
-
The SDP identifier.
- vc-id
-
The virtual circuit ID on the SDP ID for which to display information.
- interface-name
-
Displays information for the specified IP interface.
- ip-address[/mask]
-
Displays information associated with the specified IP address.
- ieee-address
-
Specifies the source MAC address.
- port-id
-
Specifies the port ID.
- no-inter-dest-id
-
Displays the information about no intermediate destination ID.
- inter-dest-id
-
Displays information about the specified intermediate destination ID, up to 64 characters.
- session
-
Shows DHCPv4 lease states for hosts that are associated with an IPoE session or for hosts that are not associated with an IPoE session.
- detail
-
Displays detailed information.
Platforms
7705 SAR Gen 2
Output
The following output is an example of the DHCP lease-state command.
Output ExampleA:node-2# show service id 13 dhcp lease-state
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address Mac Address Sap/Sdp Id Remaining Lease MC
LifeTime Origin Stdby
-------------------------------------------------------------------------------
10.13.40.1 00:00:00:00:00:13 1/1/1:13 00h00m58s Radius
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A#
# show service id 1000 dhcp lease-state detail
===============================================================================
DHCP lease states for service 1000
===============================================================================
Service ID : 1000
IP Address : 10.250.21.2
Client HW Address : 00:02:01:00:00:01
Subscriber-interface : sub-int-2
Group-interface : group-int-2-3
SAP : [1/1/2:2513.20]
Termination Type : local
Up Time : 0d 00:04:51
Remaining Lease Time : 0d 00:05:09
Remaining SessionTime: N/A
Persistence Key : 0x00000000
Sub-Ident : "sub-02-01"
Sub-Profile-String : "sub-profile-1"
SLA-Profile-String : "sla-profile-1"
App-Profile-String : ""
Lease ANCP-String : ""
Lease Int Dest Id : ""
Category-Map-Name : ""
Lease Info origin : DHCP
Ip-Netmask : 255.255.255.0
Broadcast-Ip-Addr : N/A
Default-Router : 10.250.21.254
Primary-Dns : N/A
Secondary-Dns : N/A
Primary-Nbns : N/A
Secondary-Nbns : N/A
ServerLeaseStart : 10/07/2020 15:00:19
ServerLastRenew : 10/07/2020 15:00:19
ServerLeaseEnd : 10/07/2020 15:10:19
Session-Timeout : N/A
IPoE|PPP session : IPoE
Lease-Time : 0d 00:10:00
DHCP Server Addr : 192.0.2.2
Relay Agent Information
Circuit Id : pe2|1000|group-int-2-3|1/1/2:2513.20
Radius Class 1 : This is a Class attribute
Radius User-Name : "00:02:01:00:00:01"
-------------------------------------------------------------------------------
Overrides
-------------------------------------------------------------------------------
Dir Type Id PIR CIR CBS MBS WRR
Class-Weight
-------------------------------------------------------------------------------
Egr Queue 1 1234 N/A 350000 350000 N/A
N/A
-------------------------------------------------------------------------------
No. of Overrides: 1
-------------------------------------------------------------------------------
SLA Profile Instance Session Limit Overrides
ipoe : 2
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================Output fields: DHCP lease state describes service DHCP lease-state information.
|
Field |
Description |
|---|---|
|
Service ID |
The service ID |
|
IP Address |
The IP address |
|
Client HW Address |
The client hardware address |
|
Subscriber-interface |
The subscriber interface name |
|
Group-interface |
The group interface name |
|
SAP |
The SAP |
|
Termination Type |
The termination type |
|
Up Time |
The up time |
|
Remaining Lease Time |
The remaining lease time |
|
Remaining SessionTime |
The remaining session time |
|
Persistence Key |
The persistence key |
|
Sub-Ident |
The name of the subscriber identification policy |
|
Sub-Profile-String |
The subscriber profile string |
|
SLA-Profile-String |
The name of the SLA profile |
|
App-Profile-String |
The application profile string |
|
Lease ANCP-String |
The lease ANCP string |
|
Lease Int Dest Id |
The lease internal destination ID |
|
Category-Map-Name |
The category map name |
|
Lease Info origin |
The origin of the lease |
|
Ip-Netmask |
The IP netmask address |
|
Broadcast-Ip-Addr |
The broadcast IP address |
|
Default-Router |
The default router |
|
Primary-Dns |
The primary DNS address |
|
Secondary-Dns |
The secondary DNS address |
|
Primary-Nbns |
The primary NBNS |
|
Secondary-Nbns |
The secondary NBNS |
|
ServerLeaseStart |
The date and time of the start of the server lease |
|
ServerLastRenew |
The date and time of the renewal of the server lease |
|
ServerLeaseEnd |
The date and time of the end of the server lease |
|
Session-Timeout |
The session timeout value |
|
IPoE|PPP session |
The type of session |
|
Lease-Time |
The lease time |
|
DHCP Server Addr |
The DHCP server IP address |
|
Relay Agent Information |
|
|
Circuit Id |
The circuit ID |
|
Radius Class 1 |
The RADIUS Class 1 value |
|
Radius User-Name |
The RADIUS user name |
|
Overrides: (only shown when overrides are active) |
|
|
Dir Type |
The direction type |
|
Id |
The ID |
|
PIR |
The PIR value |
|
CIR |
The CIR value |
|
CBS |
The CBS value |
|
MBS |
The MBS value |
|
WRR |
The WRR value |
|
Class-Weight |
The class weight |
|
No. of Overrides |
The total number of overrides |
|
Subscriber Host Limit Overrides and SLA Profile Instance Host Limit Overrides: (only shown when overrides are active) |
|
|
ipv4-arp |
The total number of IPv4 ARP hosts limit |
|
ipv4-dhcp |
The total number of IPv4 DHCP hosts limit |
|
ipv4-ppp |
The total number of IPv4 PPP hosts limit |
|
ipv4-overall |
The total number of IPv4 hosts limit |
|
ipv6-pd-ipoe-dhcp |
The total number of IPv6 IPoE DHCP Prefix Delegation hosts (IA-PD) limit |
|
ipv6-pd-ppp-dhcp |
The total number of IPv6 PPPoE DHCP Prefix Delegation hosts (IA-PD) limit |
|
ipv6-pd-overall |
The total number of IPv6 DHCP Prefix Delegation hosts (IA-PD) limit |
|
ipv6-wan-ipoe-dhcp |
The total number of IPv6 IPoE DHCP WAN hosts (IA-NA) limit |
|
ipv6-wan-ipoe-slaac |
The total number of IPv6 IPoE SLAAC WAN hosts limit |
|
ipv6-wan-ppp-dhcp |
The total number of IPv6 PPPoE DHCP WAN hosts (IA-NA) limit |
|
ipv6-wan-ppp-slaac |
The total number of IPv6 IPoE SLAAC WAN hosts limit |
|
ipv6-wan-overall |
The total number of IPv6 WAN hosts limit |
|
ipv6-overall |
The total number of IPv6 hosts limit |
|
lac-overall |
The total number of L2TP LAC hosts limit |
|
overall |
The total number of subscriber hosts limit |
|
Subscriber Session Limit Overrides and SLA Profile Instance Session Limit Overrides: (only shown when overrides are active) |
|
|
ipoe |
The total number of IPoE sessions limit |
|
ppoe-local |
The total number of PPPoE local terminated sessions (PTA) limit |
|
ppoe-lac |
The total number of PPPoE L2TP LAC sessions limit |
|
ppoe-overall |
The total number of PPPoE sessions limit |
|
l2tp-lns |
The total number of L2TP LNS sessions limit |
|
l2tp-lts |
The total number of L2TP LTS sessions limit |
|
l2tp-overall |
The total number of L2TP sessions limit |
|
overall |
The total number of subscriber sessions limit |
|
Number of lease states |
The total number of lease states |
A:ALA-_Dut-A# show service id 13 dhcp lease-state
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address Mac Address Sap/Sdp Id Remaining Lease MC
LifeTime Origin Stdby
-------------------------------------------------------------------------------
10.13.40.1 00:00:00:00:00:13 1/1/1:13 00h00m58s Radius
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A#
A:ALA-_Dut-A# show service id 13 dhcp lease-state detail
===============================================================================
DHCP lease states for service 13
===============================================================================
Service ID : 13
IP Address : 10.13.40.1
Mac Address : 00:00:00:00:00:13
Subscriber-interface : ies-13-10.13.1.1
Group-interface : intf-13
SAP : 1/1/1:13
Remaining Lifetime : 00h00m58s
Persistence Key : N/A
Sub-Ident : "TEST"
Sub-Profile-String : "ADSL GO"
SLA-Profile-String : "BE-Video"
Lease ANCP-String : ""
Sub-Ident origin : Radius
Strings origin : Radius
Lease Info origin : Radius
Ip-Netmask : 255.255.0.0
Broadcast-Ip-Addr : 10.13.255.255
Default-Router : N/A
Primary-Dns : 10.13.254.254
Secondary-Dns : 10.13.254.253
ServerLeaseStart : 12/24/2006 23:48:23
ServerLastRenew : 12/24/2006 23:48:23
ServerLeaseEnd : 12/24/2006 23:49:23
Session-Timeout : 0d 00:01:00
DHCP Server Addr : N/A
Persistent Relay Agent Information
Circuit Id : ancstb6_Dut-A|13|intf-13|0|13
Remote Id : stringtest
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A#
A:ALA-_Dut-A# show service id 2000 dhcp lease-state detail
===============================================================================
DHCP lease states for service 2000
-------------------------------------------------------------------------------
Wholesaler 1000 Leases
-------------------------------------------------------------------------------
Service ID : 1000
IP Address : 10.13.1.254
Mac Address : 00:00:00:00:00:13
Subscriber-interface : whole-sub
Group-interface : intf-13
Retailer : 2000
Retailer If : retail-sub
SAP : 1/1/1:13
Remaining Lifetime : 00h09m59s
Persistence Key : N/A
Sub-Ident : "TEST"
Sub-Profile-String : "ADSL GO"
SLA-Profile-String : "BE-Video"
Lease ANCP-String : ""
Sub-Ident origin : Retail DHCP
Strings origin : Retail DHCP
Lease Info origin : Retail DHCP
Ip-Netmask : 255.255.0.0
Broadcast-Ip-Addr : 10.13.255.255
Default-Router : N/A
Primary-Dns : N/A
Secondary-Dns : N/A
ServerLeaseStart : 12/25/2006 00:29:41
ServerLastRenew : 12/25/2006 00:29:41
ServerLeaseEnd : 12/25/2006 00:39:41
Session-Timeout : 0d 00:10:00
DHCP Server Addr : 10.232.237.2
Persistent Relay Agent Information
Circuit Id : 1/1/1:13
Remote Id : stringtest
Subscriber Host Limit Overrides
ipv4-arp : 1
ipv4-dhcp : 1
ipv4-ppp : 1
ipv4-overall : 1
ipv6-pd-ipoe-dhcp : 1
ipv6-pd-ppp-dhcp : 1
ipv6-pd-overall : 1
ipv6-wan-ipoe-dhcp : 1
ipv6-wan-ipoe-slaac : 1
ipv6-wan-ppp-dhcp : 1
ipv6-wan-ppp-slaac : 1
ipv6-wan-overall : 1
ipv6-overall : 1
lac-overall : 1
overall : 1
SLA Profile Instance Host Limit Overrides
ipv4-arp : 1
ipv4-dhcp : 1
ipv4-ppp : 1
ipv4-overall : 1
ipv6-pd-ipoe-dhcp : 1
ipv6-pd-ppp-dhcp : 1
ipv6-pd-overall : 1
ipv6-wan-ipoe-dhcp : 1
ipv6-wan-ipoe-slaac : 1
ipv6-wan-ppp-dhcp : 1
ipv6-wan-ppp-slaac : 1
ipv6-wan-overall : 1
ipv6-overall : 1
lac-overall : 1
overall : 1
Subscriber Session Limit Overrides
ipoe : 1
pppoe-local : 1
pppoe-lac : 1
pppoe-overall : 1
l2tp-lns : 1
l2tp-lts : 1
l2tp-overall : 1
overall : 1
SLA Profile Instance Session Limit Overrides
ipoe : 1
pppoe-local : 1
pppoe-lac : 1
pppoe-overall : 1
l2tp-lns : 1
l2tp-lts : 1
l2tp-overall : 1
overall : 1
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A#
lease-state
Syntax
lease-state [detail] [wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]
lease-state [detail] interface interface-name [wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]
lease-state [detail] ipv6-address ipv6-prefix[/prefix-length] [wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]
lease-state [detail] mac ieee-address [wholesaler service-id] [session {none | ipoe | ppp}] [router-advertisement-policy policy-name]
Context
[Tree] (show>service>id>dhcp6 lease-state)
Full Context
show service id dhcp6 lease-state
Description
This command displays DHCPv6 lease state information.
The wholesaler service-id parameter is applicable only in the VPRN context.
Parameters
- detail
-
Displays detailed lease state information.
- service-id
-
The service ID of the wholesaler. When specified in this context, SAP, SDP, interface, IP address and MAC parameters are ignored.
- session
-
Shows DHCPv6 lease states for clients that are associated with an IPoE session or for clients that are associated with a PPP session or for clients that are not associated with an IPoE session.
- policy-name
-
Specifies the name of the router advertisement policy.
- interface-name
-
Specifies the interface name, up to 32 characters.
- ipv6-address[/mask]
-
Shows information for the specified IPv6 address and mask.
- ieee-address
-
Shows information for the specified 48-bit MAC address, expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff, where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Platforms
7705 SAR Gen 2
Output
The following output is an example of DHCP6 lease state information.
Output Example*A:eng-BNG-2# show service id 1000 dhcp6 lease-state detail
===============================================================================
DHCP lease states for service 1000
===============================================================================
Service ID : 1000
IP Address : 2001:1000:0:4::1/128
Client HW Address : 00:00:10:10:12:12
Subscriber-interface : sub-int-01
Group-interface : grp-int-01
SAP : 1/1/20:841
Termination Type : local
Up Time : 0d 00:00:13
Remaining Lease Time : 0d 23:59:47 (Lease Split)
Remaining SessionTime: N/A
Persistence Key : N/A
Sub-Ident : "host-1"
Sub-Profile-String : "no-prof"
SLA-Profile-String : "no-prof"
App-Profile-String : ""
Lease ANCP-String : ""
Lease Int Dest Id : ""
Category-Map-Name : ""
Dhcp6 ClientId (DUID): 00030001000010101212
Dhcp6 IAID : 0
Dhcp6 IAID Type : non-temporary
Dhcp6 Client Ip : fe80:db8:200:10ff:fe10:1212
Primary-Dns : N/A
Secondary-Dns : N/A
Pool Name : ""
Dhcp6 Server Addr : ::10
Dhcp6 ServerId (DUID): 00030001d854ff000000
Dhcp6 InterfaceId : test
Dhcp6 RemoteId : N/A
Radius sub-if prefix : N/A
Router adv. policy : ra-policy-01
Lease Info origin : DHCP
ServerLeaseStart : 02/13/2017 22:04:24
ServerLastRenew : 02/13/2017 22:04:24
ServerLeaseEnd : 02/14/2017 22:04:24
Session-Timeout : N/A
IPoE|PPP session : No
Radius User-Name : "00:00:10:10:12:12"
-------------------------------------------------------------------------------
Overrides
-------------------------------------------------------------------------------
Dir Type Id PIR CIR CBS MBS WRR
Class-Weight
-------------------------------------------------------------------------------
Egr Queue 1 1234 N/A 350000 350000 N/A
N/A
-------------------------------------------------------------------------------
No. of Overrides: 1
-------------------------------------------------------------------------------
SLA Profile Instance Session Limit Overrides
ipoe : 2
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
*A:Dut-A#show service id 13 dhcp6 lease-state router-advertisement-policy ra-policy-01
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address Mac Address Sap/Sdp Id Remaining Lease MC
LeaseTime Origin Stdby
-------------------------------------------------------------------------------
2013:bad:beaf::1/128
00:00:00:00:00:13 1/1/1:13 23h47m34s DHCP
2013:bad:beaf::2/128
00:00:00:00:00:14 1/1/1:13 23h52m36s DHCP
2013:bad:beaf::3/128
00:00:00:00:00:15 1/1/1:13 23h54m17s DHCP
-------------------------------------------------------------------------------
Number of lease states : 3
===============================================================================
*A:Dut-A#
Output fields: DHCPv6 lease state router advertisement describes DHCPv6 lease state router advertisement policy output fields.
|
Field |
Description |
|---|---|
|
Service ID |
The service ID provided by the access node to which this subnet is bound |
|
IP Address |
The IP address of the service |
|
Client HW Address |
The MAC address of the client |
|
Subscriber-Interface |
The subscriber interface for the service |
|
Group-interface |
The group interface for the service |
|
Sap/Sdp ID |
The service SAP and SDP IDs |
|
Termination Type |
The PPP session type |
|
Up Time |
The value of the up time at the time of the last modification of an entry |
|
Remaining Lease Time |
The time left before the DHCPv6 lease expires. The client should renew its lease before this timer expires. (Lease Split) indicates that DHCPv6 lease split is active. |
|
Remaining SessionTime |
The time left for this session |
|
Persistence Key |
The persistence key |
|
Sub-Ident |
The subscriber identification policy name |
|
Sub-Profile-String |
The subscriber profile policy name |
|
App-Profile-String |
The application profile policy name |
|
Lease ANCP-String |
The ANCP string |
|
Category-Map-Name |
The category map name |
|
Dhcp6 ClientID (DUID) |
The DHCP client ID |
|
Dhcp6 IAID |
The DHCPv6 Identity Association Identifier (IAID) assigned by the client |
|
Dhcp6 IAID Type |
The DHCPv6 Identity Association type of this lease (non-temporary or prefix) |
|
Dhcp6 Client Ip |
The DHCPv6 IP address of the client |
|
Primary-Dns |
The primary DNS, if configured |
|
Secondary-Dns |
The secondary DNS, if configured |
|
Pool Name |
The pool name |
|
Dhcp6 Server Addr |
The DHCPv6 server address |
|
Dhcp6 ServerID (DUID) |
The DHCPv6 server ID |
|
Dhcp6 InterfaceId |
The DHCPv6 interface ID |
|
Dhcp6 RemoteId |
The DHCPv6 remote ID |
|
Radius sub-if prefix |
The RADIUS subscriber interface prefix |
|
Router adv. policy |
The router advertisement policy |
|
Lease Info origin |
The lease info origin |
|
ServerLeaseStart |
The date and time the lease was created |
|
ServerLastRenew |
The last renew was done for this lease |
|
ServerLeaseEnd |
The time left for this lease |
|
Session-Timeout |
The session timeout interval |
|
IPoE|PPP |
IPoE or PPP |
|
Radius User-Name |
The RADIUS user name |
|
Overrides: (only shown when overrides are active) |
|
|
Dir Type |
The direction type |
|
Id |
The ID |
|
PIR |
The PIR value |
|
CIR |
The CIR value |
|
CBS |
The CBS value |
|
MBS |
The MBS value |
|
WRR |
The WRR value |
|
Class-Weight |
The class weight |
|
No. of Overrides |
The total number of overrides |
|
Subscriber Host Limit Overrides and SLA Profile Instance Host Limit Overrides: (only shown when overrides are active) |
|
|
ipv4-arp |
The total number of IPv4 ARP hosts limit |
|
ipv4-dhcp |
The total number of IPv4 DHCP hosts limit |
|
ipv4-ppp |
The total number of IPv4 PPP hosts limit |
|
ipv4-overall |
The total number of IPv4 hosts limit |
|
ipv6-pd-ipoe-dhcp |
The total number of IPv6 IPoE DHCP Prefix Delegation hosts (IA-PD) limit |
|
ipv6-pd-ppp-dhcp |
The total number of IPv6 PPPoE DHCP Prefix Delegation hosts (IA-PD) limit |
|
ipv6-pd-overall |
The total number of IPv6 DHCP Prefix Delegation hosts (IA-PD) limit |
|
ipv6-wan-ipoe-dhcp |
The total number of IPv6 IPoE DHCP WAN hosts (IA-NA) limit |
|
ipv6-wan-ipoe-slaac |
The total number of IPv6 IPoE SLAAC WAN hosts limit |
|
ipv6-wan-ppp-dhcp |
The total number of IPv6 PPPoE DHCP WAN hosts (IA-NA) limit |
|
ipv6-wan-ppp-slaac |
The total number of IPv6 PPPoE SLAAC WAN hosts limit |
|
ipv6-wan-overall |
The total number of IPv6 WAN hosts limit |
|
ipv6-overall |
The total number of IPv6 hosts limit |
|
lac-overall |
The total number of L2TP LAC hosts limit |
|
overall |
The total number of subscriber hosts limit |
|
Subscriber Session Limit Overrides and SLA Profile Instance Session Limit Overrides: (only shown when overrides are active) |
|
|
ipoe |
The total number of IPoE sessions limit |
|
ppoe-local |
The total number of PPPoE local terminated sessions (PTA) limit |
|
ppoe-lac |
The total number of PPPoE L2TP LAC sessions limit |
|
ppoe-overall |
The total number of PPPoE sessions limit |
|
l2tp-lns |
The total number of L2TP LNS sessions limit |
|
l2tp-lts |
The total number of L2TP LTS sessions limit |
|
l2tp-overall |
The total number of L2TP sessions limit |
|
overall |
The total number of subscriber sessions limit |
|
Number of lease states |
The total number of lease states |
lease-state
Syntax
lease-state all [no-dhcp-release]
lease-state [port port-id] inter-dest-id intermediate-destination-id [no-dhcp-release]
lease-state [port port-id] no-inter-dest-id [no-dhcp-release]
lease-state ip-address ip-address [/mask] [no-dhcp-release]
lease-state mac ieee-address [no-dhcp-release]
lease-state port port-id [no-dhcp-release]
lease-state sap sap-id [no-dhcp-release]
lease-state sdp sdp-id:vc-id [no-dhcp-release]
Context
[Tree] (clear>service>id>dhcp lease-state)
Full Context
clear service id dhcp lease-state
Description
This command removes the DHCPv4 lease state information from the system and sends a DHCP release message on behalf of the client to the DHCP server. A DHCP release is not sent when the remaining lease-time is less than 5 minutes or when the no-dhcp-release parameter is specified.
Parameters
- all
-
Clears all lease state statistics.
- port-id
-
Displays information about the specified port ID.
- intermediate-destination-id
-
Displays information about the specified intermediate destination ID, up to 32 characters.
- no-inter-dest-id
-
Displays the information about no intermediate destination ID.
- ip-address[/mask]
-
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that is used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
- ieee-address
-
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
- sap-id
-
Specifies the physical port identifier portion of the SAP definition.
- sdp-id
-
The SDP ID to be cleared.
- vc-id
-
The virtual circuit ID on the SDP ID to be cleared.
- no-dhcp-release
-
Specifies that the node clears the state without sending the DHCP release message.
Platforms
7705 SAR Gen 2
lease-state
Syntax
lease-state all [no-dhcp-release]
lease-state ipv6-address ipv6-prefix[/prefix-length] [ no-dhcp-release]
lease-state mac ieee-address [no-dhcp-release]
lease-state sap sap-id [no-dhcp-release]
Context
[Tree] (clear>service>id>dhcp6 lease-state)
Full Context
clear service id dhcp6 lease-state
Description
This command removes the DHCPv6 lease state information from the system and sends a DHCP release message on behalf of the client to the DHCP server. A DHCP release is not sent when the remaining lease-time is less than 5 minutes or when the no-dhcp-release parameter is specified.
Parameters
- all
-
Clears all lease-states.
- no-dhcp-release
-
Specifies that the node clears the state without sending the DHCP release message.
- ipv6-prefix[/prefix-length]
-
Clears routes only matching the specified IP address and length.
- ieee-address
-
Clears DHCP6 MAC address lease state information. The 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
- sap-id
-
Clears the specified lease state SAP information.
Platforms
7705 SAR Gen 2
leases
leases
Syntax
leases [detail]
leases ip-address[/mask] address-from-user-db [detail]
leases ip-address[/mask] dhcp-host dhcp-host-name [detail]
leases ip-address[/mask] ppp-host ppp-host-name [detail]
leases ip-address[/mask] [detail]
Context
[Tree] (show>router>dhcp>local-dhcp-server leases)
Full Context
show router dhcp local-dhcp-server leases
Description
This command displays the DHCP leases.
Parameters
- ip-address
-
Specifies the base IP address of the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
- mask
-
The subnet mask in dotted decimal notation.
- address-from-user-db
-
Displays only leases that have IP addresses from the local-user-db.
- dhcp-host-name
-
Shows the leases that match a certain DHCP host from the local-user-db.
- ppp-host-name
-
Displays the leases that match a certain PPPoE host from the local-user-db.
- detail
-
Displays detailed information of all leases that fall into the indicated subnet.
The command with no parameters shows all leases from the local-user-db.
Platforms
7705 SAR Gen 2
Output
The following output is an example of lease information
Output Example*A:ALA-48>show>router>dhcp>local-dhcp-server# leases ip-address 10.0.0.4
===============================================================================
Leases for DHCP server test router Base
===============================================================================
IP Address Lease State Mac Address Remaining Clnt
PPPoE user name/Opt82 Circuit Id LifeTime Type
-------------------------------------------------------------------------------
No leases found
*A:ALA-48>show>router>dhcp>local-dhcp-server#
Output fields: leases describes leases output fields.
|
Field |
Description |
|---|---|
|
IP Address |
The IP address for the specified lease |
|
Lease State |
The lease state of the IP address |
|
Mac Address |
The MAC address of the lease |
|
Remaining Lifetime |
The remaining lifetime of the lease |
|
Clnt Type |
The address type |
|
PPPoE user name |
The PPPoE user name |
|
Opt82 |
The option number that the DHCP server uses to send the identification strings to the PPPoE client |
|
Circuit ID |
The circuit ID from Option 82 |
leases
Syntax
leases [ipv6-address/prefix-length] [type] [state] [detail]
Context
[Tree] (show>router>dhcp6>local-dhcp-server leases)
Full Context
show router dhcp6 local-dhcp-server leases
Description
This command displays the DHCP6 leases.
Parameters
- ipv6-address
-
Specifies the base IP address of the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
- mask
-
The subnet mask in dotted decimal notation.
- type
-
Displays the lease type.
- state
-
Displays the state of the lease.
- detail
-
Displays detailed information of all leases that fall into the indicated subnet.
The command with no parameters shows all leases from the local user database.
Platforms
7705 SAR Gen 2
Output
The following output is an example of lease information.
Output Exampleshow router 600 dhcp6 local-dhcp-server "d6" leases
===============================================================================
Leases for DHCPv6 server d6
===============================================================================
IP Address/Prefix Lease State Remaining Fail
Link-local Address LifeTime Ctrl
-------------------------------------------------------------------------------
2001:AAAA::1/128
FE80::220:FCFF:FE1E:CD52 stable 23h58m52s local
-------------------------------------------------------------------------------
1 leases found
===============================================================================
Output fields: DHCP6 lease describes DHCP6 lease fields.
|
Field |
Description |
|---|---|
|
IP Address/Prefix |
The IP address and prefix of the lease |
|
Link-local Address |
The link local address of the lease |
|
Lease State |
The lease state of the lease |
|
Remaining Lifetime |
The remaining lifetime of the lease |
|
Fail Ctrl |
The type of failover control |
|
No. leases found |
The total number of leases |
leases
Syntax
leases ip-address[/mask] [state]
leases all [state]
Context
[Tree] (clear>router>dhcp>server leases)
Full Context
clear router dhcp local-dhcp-server leases
Description
This command clears DHCP leases.
Parameters
- ip-address[/mask]
-
Clears the specified IP address and mask.
- state
-
Clears the state of the lease to be removed.
Platforms
7705 SAR Gen 2
leases
Syntax
leases [ipv6-address/prefix-length] [type] [state]
leases all [type] [state]
Context
[Tree] (clear>router>dhcp6>server leases)
Full Context
clear router dhcp6 local-dhcp-server leases
Description
This command removes the specified leases in the specified local DHCPv6 server.
Parameters
- ipv6-address/prefix-length
-
Specifies the prefix of the leases to be removed.
- type
-
Specifies the type of the lease to be removed.
- state
-
Specifies the state of the lease to be removed.
- all
-
Removes all leases of specified type or state.
Platforms
7705 SAR Gen 2
lfa-coverage
lfa-coverage
Syntax
lfa-coverage
Context
[Tree] (show>router>isis lfa-coverage)
Full Context
show router isis lfa-coverage
Description
This command displays IS-IS LFA coverage information. This information corresponds to the backup next hops for prefixes and nodes written in RTM by the base LFA feature.
Platforms
7705 SAR Gen 2
Output
The following output is an example of LFA coverage information.
Output Example*A:SR# show router isis lfa-coverage
============================================================================
Rtr Base ISIS Instance 0 LFA Coverage
============================================================================
Topology Level Node IPv4
----------------------------------------------------------------------------
IPV4 Unicast L1 4/4(100%) 826/826(100%)
IPV4 Unicast L2 2/2(100%) 826/826(100%)
IPV6 Unicast L1 3/3(100%) 0/0(0%)
IPV6 Unicast L2 0/0(0%) 0/0(0%)
============================================================================
*A:SR#
*A:SRR>config>router>isis# show router isis lfa-coverage
===============================================================================
LFA Coverage
===============================================================================
Topology Level Node IPv4 IPv6
-------------------------------------------------------------------------------
IPV4 Unicast L1 3/4(75%) 1484/1975(75%) 0/0(0%)
IPV4 Unicast L2 3/3(100%) 1484/1975(75%) 0/0(0%)
===============================================================================
*A:SRR>config>router>isis#
lfa-coverage
Syntax
lfa-coverage
Context
[Tree] (show>router>ospf3 lfa-coverage)
[Tree] (show>router>ospf lfa-coverage)
Full Context
show router ospf3 lfa-coverage
show router ospf lfa-coverage
Description
This command displays OSPFv2 or OSPFv3 Loop-Free Alternate (LFA) next-hop information. This information corresponds to the backup next hops for prefixes and nodes written in RTM by the base LFA feature.
Platforms
7705 SAR Gen 2
Output
Output Example*A:Dut-A# show router ospf 1 lfa-coverage
=======================================================================
Rtr Base OSPFv2 Instance 1 LFA Coverage
=======================================================================
Area Node Prefix
---------------------------------------------------------------------------
0.0.0.0 4/4(100%) 8/8(100%)
=======================================================================
*A:Dut-A#
*A:Dut-C>config>router>ospf3# show router ospf3 0 lfa-coverage
===========================================================================
Rtr Base OSPFv3 Instance 0 LFA Coverage
===========================================================================
Area Node Prefix
---------------------------------------------------------------------------
0.0.0.1 1/3(33%) 9/27(33%)
===========================================================================
license
license
Syntax
license available-licenses
Context
[Tree] (show>system license)
Full Context
show system license
Description
Displays information related to the active license(s) within the system. This includes the license name, target UUID, target product, target SR OS release, and the start, end, and issue date of the license.
If the available-licenses attribute is included, then the information for each active license shall be displayed. The usual case for more than one license in a system is during an upgrade procedures when there needs to be both the originating and destination release licenses available in the system.
Parameters
- available-licenses
-
Includes information for all licenses active in the system.
Platforms
7705 SAR Gen 2
Output
The following output is an example of license information.
Output Example*A:ExitLeaf-35# show system license
===============================================================================
Current License
===============================================================================
License status : monitoring, valid license record
Time remaining : 131 days 9 hours
-------------------------------------------------------------------------------
License name : sr-regress@list.nokia.com
License uuid : ab516e50-2413-44aa-9f7c-34b4e5b64d19
Machine uuid : ab516e50-2413-44aa-9f7c-34b4e5b64d19
License desc : 7xxx Platform
License prod : 7xxx Platform
License sros : TiMOS-[BC]-16.0.*
Current date : FRI NOV 03 15:53:54 UTC 2017
Issue date : FRI SEP 22 20:55:14 UTC 2017
Start date : FRI SEP 15 00:00:00 UTC 2017
End date : THU MAR 15 00:00:00 UTC 2018
-------------------------------------------------------------------------------
Entitlement
IOM Upgrades : !cr-er 1
: !er-he 1
: !cr400g-cr1200g+ 1
: !er400g-er1200g+ 1
: !he400g-he1200g+ 1
: !cr-er1200g+ 1
: !er-he1200g+ 1
MDA Upgrades : cr1200g-cr1600g 1
: cr1600g-cr2400g 1
: er1200g-er1600g 1
: er1600g-er2400g 1
: he1200g-he1600g 1
: he1600g-he2400g 1
: cr1200g-er1200g 1
: er1200g-he1200g 1
: cr1600g-er1600g 1
: er1600g-he1600g 1
: cr2400g-er2400g 1
: er2400g-he2400g 1
: !any2400g-2400g+ 1
: !cr3600g-cr4800g 1
: !er3600g-er4800g 1
: !he3600g-he4800g 1
: !cr3600g-er3600g 1
: !er3600g-he3600g 1
: !cr4800g-er4800g 1
: !er4800g-he4800g 1
: !any3600g-3600gdd 1
: !any4800g-4800g+ 1
-------------------------------------------------------------------------------
! - indicates license not applicable to system
licensing
licensing
Syntax
licensing port-id
licensing audit [monitored]
licensing entitlements
Context
[Tree] (show licensing)
Full Context
show licensing
Description
This command displays information related to the active application licenses on the system. The licenses are either monitored RTUs or entitlement ASLs, both of which cover features and scale in use in the SR OS system.
For monitored RTUs, there is a legal requirement to purchase the RTU parts to cover the administrative enabling of the related features and scale; however, the SR OS does not block the activation or scale of the feature.
For entitlement ASLs, feature activation on the SR OS system requires the installation of the ASL via the license-file mechanism before the related feature can be enabled.
When the audit keyword is used, the display shows all the monitored RTUs and entitlement ASLs of the node. Using the optional monitored keyword together with audit restricts the display to only the monitored RTUs.
When the entitlements keyword is used, the display shows all the entitlements in the active licenses in the system, the type of license, the quantity of POOL licenses, and the number of each that is in use or available for use.
Parameters
- audit
-
Specifies that the state of all features covered by licenses is displayed.
- monitored
-
Specifies that only the monitored RTUs are included in the audit display.
- entitlements
-
Specifies that the number of instances allowed by the active license is displayed.
- port-id
-
Specifies the port identifier in the format slot[/mda[/connector[/port]]].
slot
1 to 10
mda
1 to 2
connector
c1 to c36
port
1 to 10
Platforms
7705 SAR Gen 2
Output
The following outputs are examples of the show licensing command output and the corresponding tables describe the output fields:
-
Output Example: show licensing; Output Fields Output fields: licensing
-
Output Example: show licensing audit; Output Fields Output fields: licensing audit
-
Output Example: show licensing entitlements; Output Fields Output fields: licensing entitlement
# show licensing 2/1
===============================================================================
Connector MAC Licensed Restrictions
-------------------------------------------------------------------------------
2/1/c1 1 Yes 400 Gbps per MAC Chip
2/1/c2 1 Yes 400 Gbps per MAC Chip
2/1/c3 1 Yes 400 Gbps per MAC Chip
2/1/c4 2 Yes 400 Gbps per MAC Chip
2/1/c5 2 Yes 400 Gbps per MAC Chip
2/1/c6 2 Yes 400 Gbps per MAC Chip
2/1/c7 3 Yes 400 Gbps per MAC Chip
2/1/c8 3 Yes 400 Gbps per MAC Chip
2/1/c9 3 Yes 400 Gbps per MAC Chip
2/1/c10 4 Yes 400 Gbps per MAC Chip
2/1/c11 4 Yes 400 Gbps per MAC Chip
2/1/c12 4 Yes 400 Gbps per MAC Chip
2/1/c13 5 Yes 400 Gbps per MAC Chip
2/1/c14 5 Yes 400 Gbps per MAC Chip
2/1/c15 5 Yes 400 Gbps per MAC Chip
2/1/c16 6 Yes 400 Gbps per MAC Chip
2/1/c17 6 Yes 400 Gbps per MAC Chip
2/1/c18 6 Yes 400 Gbps per MAC Chip
2/1/c19 7 Yes 400 Gbps per MAC Chip
2/1/c20 7 Yes 400 Gbps per MAC Chip
2/1/c21 7 Yes 400 Gbps per MAC Chip
2/1/c22 8 Yes 400 Gbps per MAC Chip
2/1/c23 8 Yes 400 Gbps per MAC Chip
2/1/c24 8 Yes 400 Gbps per MAC Chip
2/1/c25 9 Yes 400 Gbps per MAC Chip
2/1/c26 9 Yes 400 Gbps per MAC Chip
2/1/c27 9 Yes 400 Gbps per MAC Chip
2/1/c28 10 Yes 400 Gbps per MAC Chip
2/1/c29 10 Yes 400 Gbps per MAC Chip
2/1/c30 10 Yes 400 Gbps per MAC Chip
2/1/c31 11 Yes 400 Gbps per MAC Chip
2/1/c32 11 Yes 400 Gbps per MAC Chip
2/1/c33 11 Yes 400 Gbps per MAC Chip
Output fields: licensing describes the output fields for the show licensing command.
|
Label |
Description |
|---|---|
|
Connector |
The identity of connector for the license limits. |
|
MAC |
The index of the MAC on the card or MDA to which the connector is attached. |
|
Licensed |
Whether or not the connector is licensed. Yes — the connector is included in the licensed level of the card or MDA and may be configured for a breakout. Other rules may apply as described in the restrictions field. No — this connector is not included in the licensed level of the card or MDA and it cannot be configured for breakout. |
|
Restrictions |
Additional license rules that may apply to the use of the connector, for example, bandwidth limits to the set of connectors on the same MAC. |
A:node-2# show licensing audit
=======================================================================
Current Current Previous
License Allocated Max 24 Hr Max
-----------------------------------------------------------------------
Network Mgmt
NRC-F 0 0 0
NRC-P 0 0 0
BGP-LS 0 0 0
BMP Station 0 0 0
Route Origination 0 0 0
Port Licenses
7x50 SR/XRS Port 1GE 0 0 0
7x50 SR/XRS Port 10GE 0 0 0
7x50 SR/XRS Port 25GE 0 0 0
7x50 SR/XRS Port 40GE 0 0 0
7x50 SR/XRS Port 50GE 0 0 0
7x50 SR/XRS Port 100GE 0 0 0
7x50 SR/XRS Port 400GE 0 0 0
7x50 SR/XRS Port 800GE 0 0 0
=======================================================================
Last 24 Hr Interval Ended: 04/15/2025 13:21:47
Output fields: licensing audit describes the output fields for the show licensing audit command.
|
Label |
Description |
|---|---|
|
License |
The name of the entitlement ASL or the monitored RTU, grouped by category |
|
Current Allocated |
The number of instances of the license that are currently in use |
|
Current Max |
The maximum number of instances of the license that were recorded as in use within the current 24-hour monitoring period |
|
Previous 24 Hr Max |
The maximum number of instances of the license that were recorded in the previous full 24-hour monitoring period; shows as "n/a" if it has been less than 24 hours since startup |
|
Last 24 Hr Interval Ended |
Indicates the end time of the last 24-hour monitoring period; not displayed if it is less than 24 hours since startup |
# show licensing entitlements
========================================================================
License Available In-Use State
------------------------------------------------------------------------
MDA Upgrades
cr1200g-cr1600g 1 0 VALID
cr1200g-er1200g 2 0 VALID
cr1600g-cr2400g 1 0 VALID
cr1600g-er1600g 0 2 VALID
cr2400g-er2400g 1 0 VALID
er1200g-er1600g 1 0 VALID
er1200g-he1200g 1 0 VALID
er1600g-er2400g 4 0 VALID
er1600g-he1600g 1 0 VALID
er2400g-he2400g 1 0 VALID
he1200g-he1600g 1 0 VALID
he1600g-he2400g 1 0 VALID
========================================================================
*
Output fields: licensing entitlement describes the output fields for the show licensing entitlement command.
|
Label |
Description |
|---|---|
|
License |
The description of the license |
|
Available |
The number of instances that are not currently being used. "License err" if in use is greater than the number of the allowed entitlements. |
|
In-Use |
The number of instances that are currently being used. |
|
State |
Indicates the state of the license as:
|
link
link
Syntax
link
Context
[Tree] (show>router>bgp>routes>bgp-ls link)
Full Context
show router bgp routes bgp-ls link
Description
This command displays BGP-LS NLRIs for link types.
Platforms
7705 SAR Gen 2
link-group-member-status
link-group-member-status
Syntax
link-group-member-status name [level level]
Context
[Tree] (show>router>isis link-group-member-status)
Full Context
show router isis link-group-member-status
Description
This command displays IS-IS link-group-member status.
Parameters
- name
-
Up to 32 characters.
- level
-
Specifies the interface level (1, 2, or 1 and 2).
Platforms
7705 SAR Gen 2
Output
The following output is an example of link group member status information.
Output ExampleA:cses-V94# show router isis link-group-member-status
- link-group-member-status <name> [level <level>]
<name> : [32 chars max]
<level> : 1|2
A:cses-V94# show router isis link-group-member-status "toDutB"
===============================================================================
Rtr Base ISIS Instance 0 Link-Group Member
===============================================================================
Link-group I/F name Level State
-------------------------------------------------------------------------------
toDutB ip-10.10.12.3 L1 Up
toDutB ip-10.10.3.3 L1 Up
toDutB ip-10.10.12.3 L2 Up
toDutB ip-10.10.3.3 L2 Up
-------------------------------------------------------------------------------
Legend: BER = bitErrorRate
===============================================================================
A:cses-V94#
link-group-status
link-group-status
Syntax
link-group-status name [level level]
Context
[Tree] (show>router>isis link-group-status)
Full Context
show router isis link-group-status
Description
This command displays IS-IS link-group status.
Parameters
- name
-
Specifies the link-group name.
- level
-
Specifies the interface level (1, 2, or 1 and 2).
Platforms
7705 SAR Gen 2
Output
The following output is an example of link group status.
Output ExampleA:cses-V94# show router isis link-group-status
===============================================================================
Rtr Base ISIS Instance 0 Link-Group Status
===============================================================================
Link-group Mbrs Oper Revert Active Level State
Mbr Mbr Mbr
-------------------------------------------------------------------------------
toDutB 2 2 2 2 L1 normal
toDutB 2 2 2 2 L2 normal
toDutE 2 2 2 2 L1 normal
toDutE 2 2 2 2 L2 normal
===============================================================================
A:cses-V94#
lldp
lldp
Syntax
lldp
lldp neighbor
Context
[Tree] (show>system lldp)
Full Context
show system lldp
Description
This command displays local Link Layer Discovery Protocol (LLDP) information at the system level. This includes an option to display summary information for all known peers.
Parameters
- neighbor
-
Displays all LLDP neighbor information.
Platforms
7705 SAR Gen 2
Output
The following output is an example of local LLDP information.
Output Example: show system lldpshow system lldp
===============================================================================
LLDP Configuration
===============================================================================
Transmit Interval : 30
Hold Multiplier : 4
Reinit Delay : 2
Notification Interval : 5
Tx Credit Max : 5
Message Fast Tx : 1
Message Fast Tx Init : 4
Admin Enabled : True
-------------------------------------------------------------------------------
LLDP System Information
-------------------------------------------------------------------------------
Chassis Id Subtype : 4
Chassis Id : d8:1f:ff:00:00:00
System Name : cses-V31
System Description : TiMOS-B-0.0.I8066 both/x86_64 Nokia 7705 SAR
Copyright (c) 2000-2025 Nokia.
All rights reserved. All use subject to applicable
license agreements.
Built on Wed Dec 3 19:14:27 PST 2014 by builder in /
rel0.0/I4269/panos/main
Capabilities Supported : bridge router
Capabilities Enabled : bridge router
-------------------------------------------------------------------------------
LLDP Destination Addresses
-------------------------------------------------------------------------------
Index 1 : 01:80:c2:00:00:0e
Index 2 : 01:80:c2:00:00:03
Index 3 : 01:80:c2:00:00:00
-------------------------------------------------------------------------------
LLDP Remote Statistics
-------------------------------------------------------------------------------
Last Change Time : 12/08/2014 21:34:48
Rem Table Inserts : 10
Rem Table Deletes : 1
Rem Table Drops : 0
Rem Table Ageouts : 3
-------------------------------------------------------------------------------
LLDP System Management Addresses
-------------------------------------------------------------------------------
Address SubType : 1 (IPv4)
Address : 10.1.1.31
Address If SubType : 2
Address If Id : 1
Address OID : .1.3.6.1.4.1.6527.1.3.3
Address SubType : 2 (IPv6)
Address : 2001:db8:dead:beef::31
Address If SubType : 2
Address If Id : 1
Address OID : .1.3.6.1.4.1.6527.1.3.3
===============================================================================
show system lldp neighbor
Link Layer Discovery Protocol (LLDP) System Information
===============================================================================
NB = nearest-bridge NTPMR = nearest-non-tpmr NC = nearest-customer
===============================================================================
Lcl Port Scope Remote Chassis ID Index Remote Port Remote System Name
-------------------------------------------------------------------------------
1/1/4 NB D8:1D:FF:00:00:00 1 1/1/5 cses-v29
1/1/6 NB D8:1D:FF:00:00:00 2 1/1/7 cses-v29
1/2/2 NB D8:1F:FF:00:00:00 3 1/1/1 cses-v31
1/2/1 NB D8:1E:FF:00:00:00 4 1/1/1 cses-v30
1/2/3 NB D8:20:FF:00:00:00 5 1/1/1 cses-v32
1/2/4 NB D8:21:FF:00:00:00 6 1/1/1 cses-V33
===============================================================================
Number of neighbors : 6
lldp
Syntax
lldp bridge-mac] [remote-info] [detail]
Context
[Tree] (show>port>ethernet lldp)
Full Context
show port ethernet lldp
Description
This command displays LLDP information.
Parameters
- bridge-mac
-
Specifies a keyword to filter the output.
- remote-info
-
Displays remote information on the bridge MAC.
- detail
-
Displays detailed information.
Platforms
7705 SAR Gen 2
Output
The following output is an example LLDP port information, and Output fields: LLDP port information describes the output fields.
Output exampleshow port 5/1/1 ethernet lldp detail
==============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
==============================================================================
Port 5/1/1 Bridge nearest-bridge
-------------------------------------------------------------------------------
Admin State : disabled Notifications : Disabled
Tunnel Nearest Bridge : Disabled
Transmit TLVs : None
PortID TLV Subtype : tx-local
Management Address Transmit Configuration:
Index 0 (OOB) : Disabled Address : 192.168.135.32
Index 1 (system) : Disabled Address : 0.0.0.0
Index 2 (IPv6 system) : Disabled Address : ::
Index 3 (IPv6 OOB) : Disabled Address : 3000::c0a8:8720
Port LLDP Stats:
Tx Frames : 0 Tx Length Err Frames : 0
Rx Frames : 0 Rx Frame Discard : 0
Rx Frame Errors : 0 Rx TLV Discard : 0
Rx TLV Unknown : 0 Rx Ageouts : 0
Port 5/1/1 Bridge nearest-non-tpmr
-------------------------------------------------------------------------------
Admin State : disabled Notifications : Disabled
Transmit TLVs : None
PortID TLV Subtype : tx-local
Management Address Transmit Configuration:
Index 0 (OOB) : Disabled Address : 192.168.135.32
Index 1 (system) : Disabled Address : 0.0.0.0
Index 2 (IPv6 system) : Disabled Address : ::
Index 3 (IPv6 OOB) : Disabled Address : 3000::c0a8:8720
Port LLDP Stats:
Tx Frames : 0 Tx Length Err Frames : 0
Rx Frames : 0 Rx Frame Discard : 0
Rx Frame Errors : 0 Rx TLV Discard : 0
Rx TLV Unknown : 0 Rx Ageouts : 0
Port 5/1/1 Bridge nearest-customer
-------------------------------------------------------------------------------
Admin State : disabled Notifications : Disabled
Transmit TLVs : None
PortID TLV Subtype : tx-local
Management Address Transmit Configuration:
Index 0 (OOB) : Disabled Address : 192.168.135.32
Index 1 (system) : Disabled Address : 0.0.0.0
Index 2 (IPv6 system) : Disabled Address : ::
Index 3 (IPv6 OOB) : Disabled Address : 3000::c0a8:8720
Port LLDP Stats:
Tx Frames : 0 Tx Length Err Frames : 0
Rx Frames : 0 Rx Frame Discard : 0
Rx Frame Errors : 0 Rx TLV Discard : 0
Rx TLV Unknown : 0 Rx Ageouts : 0
==============================================================================
|
Label |
Description |
|---|---|
|
Admin State |
Indicates LLDP transmission or reception handling on the port |
|
Notifications |
Enabled – LLDP notifications are enabled Disabled – LLDP notifications are disabled |
|
Tunnel Nearest Bridge |
Enabled – the nearest bridge tunneling frames are enabled Disabled – the nearest bridge tunneling frames are disabled |
|
Transmit TLVs |
port-desc – this LLDP TLV is transmitted sys-name – this LLDP TLV is transmitted sys-desc – this LLDP TLV is transmitted sys-cap – this LLDP TLV is transmitted none – no LLDP TLVs are transmitted |
|
PortID TLV Subtype |
tx-if-alias – this port identifier TLV is transmitted to the peer tx-ifname – this port identifier TLV is transmitted to the peer tx-local – this port identifier TLV is transmitted to the peer |
|
Index 0 (OOB) |
Uses the IPv4 out-of-band management IP address |
|
Index 1 (system) |
Uses the IPv4 system IP address |
|
Index 2 (IPv6 system) |
Uses the IPv6 system IP address |
|
Index 3 (IPv6 OOB) |
Uses the IPv6 out-of-band management IP address |
|
Address |
The IP address associated with the index |
|
Tx Frames |
The number of LLDP frames transmitted from the port |
|
Rx Frames |
The number of LLDP frames received on the port |
|
Rx Frame Errors |
The number of LLDP frames received with errors on the port |
|
Rx TLV Unknown |
The number of LLDP frames received on the port with a properly formatted TLV that was not supported on the receiving port |
|
Tx Length Err Frames |
The number of LLDP frames transmitted with length errors from the port |
|
Rx Frame Discard |
The number of LLDP frames received but discarded on the port |
|
Rx TLV Discard |
The number of LLDP frames received on the port discarded because of the TLV |
|
Rx Ageouts |
The number of LLDP frames received on the port with a properly formatted TLV that was not supported on the receiving port |
lldp-member-template
lldp-member-template
Syntax
lldp-member-template [dest-mac dest-mac-type]
Context
[Tree] (show>lag lldp-member-template)
Full Context
show lag lldp-member-template
Description
This command displays LLDP member port information.
Parameters
- dest-mac-type
-
Specifies the destination MAC address type.
Platforms
7705 SAR Gen 2
Output
The following output is an example of LLDP member port information, and Output fields: LLDP member port information describes the output fields.
Output exampleshow lag lag-1 lldp-member-template
===============================================================================
LAG Link Layer Discovery Protocol member template information
===============================================================================
nearest-bridge
-------------------------------------------------------------------------------
Administrative state : disabled
Notifications : disabled
Port-id subtype : tx-local
Transmit TLVs : (Not Specified)
Tunnel-nearest-bridge : disabled
Management address transmit : (Not Specified)
nearest-non-tpmr
-------------------------------------------------------------------------------
Administrative state : disabled
Notifications : disabled
Port-id subtype : tx-local
Transmit TLVs : (Not Specified)
Management address transmit : (Not Specified)
nearest-customer
-------------------------------------------------------------------------------
Administrative state : disabled
Notifications : disabled
Port-id subtype : tx-local
Transmit TLVs : (Not Specified)
Management address transmit : (Not Specified)
===============================================================================|
Label |
Description |
|---|---|
|
Administrative state |
Indicates LLDP transmission or reception handling on the port |
|
Notifications |
Enabled – LLDP notifications are enabled Disabled – LLDP notifications are disabled |
|
Port-id subtype |
tx-if-alias – this port identifier TLV is transmitted to the peer tx-ifname – this port identifier TLV is transmitted to the peer tx-local – this port identifier TLV is transmitted to the peer |
|
Transmit TLVs |
port-desc – this LLDP TLV is transmitted sys-name – this LLDP TLV is transmitted sys-desc – this LLDP TLV is transmitted sys-cap – this LLDP TLV is transmitted none – no LLDP TLVs are transmitted |
|
Tunnel-nearest-bridge |
Enabled – the nearest bridge tunneling frames are enabled Disabled – the nearest bridge tunneling frames are disabled |
|
Management address transmit |
The management address transmitted |
lns-group
lns-group
Syntax
lns-group lns-group-id statistics esa-vm vapp-id
lns-group lns-group-id mda mda-id statistics
Context
[Tree] (clear>isa lns-group)
Full Context
clear isa lns-group
Description
This command clears the statistics for the identified VM within the specified LNS group.
Parameters
- lns-group-id
-
Specifies the LNS group identifier.
- statistics
-
Displays statistics information.
- mda-id
-
Specifies the ESA and VM identifying an LNS group.
- vapp-id
-
Specifies the ESA and VM identifying an LNS group.
Platforms
7705 SAR Gen 2
load-balancing-alg
load-balancing-alg
Syntax
load-balancing-alg [detail]
Context
[Tree] (show>system load-balancing-alg)
Full Context
show system load-balancing-alg
Description
This command displays system load balancing settings.
Parameters
- detail
-
Keyword to display port settings.
Platforms
7705 SAR Gen 2
Output
The following output is an example of load balancing information.
Output Example*A:bkvm15# show system load-balancing-alg
===============================================================================
System-wide Load Balancing Algorithms
===============================================================================
L4 Load Balancing : exclude-L4
LSR Load Balancing : lbl-ip-l4-teid
eLER Enhanced Load Balancing : disabled
System IP Load Balancing : disabled
Multicast Enhanced Load Balancing : disabled
Service ID LAG Hashing : disabled
===============================================================================
*A:bkvm15#
local-dhcp-server
local-dhcp-server
Syntax
local-dhcp-server server-name
Context
[Tree] (show>router>dhcp local-dhcp-server)
[Tree] (show>router>dhcp6 local-dhcp-server)
Full Context
show router dhcp local-dhcp-server
show router dhcp6 local-dhcp-server
Description
This command displays local DHCP or DHCP6 server information.
Parameters
- server-name
-
Specifies information about the local DHCP server.
Platforms
7705 SAR Gen 2
local-dhcp-server
Syntax
local-dhcp-server server-name
Context
[Tree] (clear>router>dhcp6 local-dhcp-server)
[Tree] (clear>router>dhcp local-dhcp-server)
Full Context
clear router dhcp6 local-dhcp-server
clear router dhcp local-dhcp-server
Description
This command clears DHCP server data.
Parameters
- server-name
-
Clears data for the specified local DHCP server.
Platforms
7705 SAR Gen 2
local-dhcp-server
Syntax
local-dhcp-server server-name
Context
[Tree] (tools>perform>router>dhcp6 local-dhcp-server)
[Tree] (tools>perform>router>dhcp local-dhcp-server)
Full Context
tools perform router dhcp6 local-dhcp-server
tools perform router dhcp local-dhcp-server
Description
This command enables tools to control the local DHCP server.
Parameters
- server-name
-
Specifies the name of the local DHCP server.
Platforms
7705 SAR Gen 2
local-user-db
local-user-db
Syntax
local-user-db local-user-db-name association [dhcp] [ppp] [l2tp] [radius] [pppoe] [dhcp6] [capture-sap] [rtr-solicit] [wpp] [ipoe] [gtp]
local-user-db local-user-db-name ipoe-all-hosts
local-user-db local-user-db-name ipoe-host ipoe-host-name
local-user-db local-user-db-name ipoe-unmatched-hosts
local-user-db [local-user-db-name]
local-user-db local-user-db-name ppp-all-hosts
local-user-db local-user-db-name ppp-host pppoe-host-name
local-user-db local-user-db-name ppp-unmatched-hosts
Context
[Tree] (show>subscr-mgmt local-user-db)
Full Context
show subscriber-mgmt local-user-db
Description
This command displays local user database information.
Parameters
- local-user-db-name
-
Specifies the name of a local user database up, to 32 characters.
- association
-
Displays entities associated with the specified local user database.
- dhcp
-
Displays entities associated with the specified local user database for DHCP clients or server.
- ppp
-
Displays entities associated with the specified local user database for PPP sessions.
- l2tp
-
Displays entities associated with the specified local user database for L2TP sessions.
- radius
-
Displays entities associated with the specified local user database for RADIUS fallback.
- pppoe
-
Displays entities associated with the specified local user database for PPPoE sessions.
- dhcp6
-
Displays entities associated with the specified local user database for DHCPv6 clients.
- capture-sap
-
Displays capture-saps associated with the specified local user database.
- rt-solicit
-
Displays entities associated with the specified local user database for rtr-solicit session.
- wpp
-
Displays entities associated with the specified local user database for WPP.
- ipoe
-
Displays entities associated with the specified local user database for IPoE sessions.
- gtp
-
Displays GTP APN policies associated with the specified local user database.
- ipoe-all-hosts
-
Displays a summary overview of all IPoE hosts .
- ipoe-host-name
-
Displays detailed information about the specified IPoE host.
- ipoe-unmatched-hosts
-
Displays unmatched IPoE hosts and the reason why they cannot be matched in the specified local user database.
- ppp-all-hosts
-
Displays a summary overview of all PPP hosts.
- ppp-hosts
-
Displays detailed information about the specified PPP host.
- ppp-unmatched-hosts
-
Displays unmatched PPP hosts and the reason why they cannot be matched in the specified local user database.
Platforms
7705 SAR Gen 2
Output
The following commands display local user database information and Output fields: local user database describes the output fields.
Output Exampleshow subscriber-mgmt local-user-db===============================================================================
Local User Databases
===============================================================================
Name Admin Host Description
State Count
-------------------------------------------------------------------------------
ludb-1 Up 5
ludb-2 Up 2
-------------------------------------------------------------------------------
Number of Local User Databases : 2 Number of Hosts : 7
===============================================================================show subscriber-mgmt local-user-db "ludb-1"===============================================================================
Local User Database "ludb-1"
===============================================================================
Description : local user database 1
Admin State : Up
Last Mgmt Change : 02/22/2023 13:04:36
Host Count : 5
Creation Origin : manual
IPoE Match Types : mac sap-id encap-tag-range
PPP Match Types : userName sap-id encap-tag-range
===============================================================================show subscriber-mgmt local-user-db "ludb-1" association dhcpNo DHCP Server associations found.
===============================================================================
DHCP client interface associations for ludb-1
===============================================================================
Interface-Name Svc-Id Type
-------------------------------------------------------------------------------
group-int-5-1 1000 IES
-------------------------------------------------------------------------------
No. of Interface(s): 1
===============================================================================
===============================================================================
Capture SAP associations for ludb-1
===============================================================================
SAP Svc-Id Type PPPoE PPP IPoE DHCP DHCP6 RS
-------------------------------------------------------------------------------
1/1/c1/1:2413.* 10 VPLS y y y y
1/1/c1/1:2422.* 10 VPLS y y y
1/1/c1/4:2111.* 10 VPLS y y y y
lag-1:2212.* 10 VPLS y y y y
-------------------------------------------------------------------------------
No. of SAP(s): 4
===============================================================================show subscriber-mgmt local-user-db "ludb-1" ipoe-all-hosts===============================================================================
Local User Database "ludb-1" IPoE hosts
===============================================================================
Name Admin Matched objects
State
-------------------------------------------------------------------------------
host-1 Up mac - -
host-2 Up - - -
default Up - - -
-------------------------------------------------------------------------------
Number of IPoE Hosts : 3
===============================================================================show subscriber-mgmt local-user-db "ludb-1" ipoe-unmatched-hosts===============================================================================
Local User Database "ludb-1" IPoE unmatched hosts
===============================================================================
Name Reason Duplicate Host
-------------------------------------------------------------------------------
host-2 No match N/A
-------------------------------------------------------------------------------
Number of IPoE Unmatched Hosts : 1
===============================================================================show subscriber-mgmt local-user-db "ludb-1" ipoe-host "host-1"===============================================================================
IPoE Host "host-1"
===============================================================================
Admin State : Up
Last Mgmt Change : 02/22/2023 12:54:12
Host Identification
Circuit Id : N/A
Mac Address : 00:00:00:00:00:01
Remote Id : N/A
Sap Id : N/A
Service Id : N/A
String : N/A
Option 60 : N/A
System Id : N/A
Encap Tag Range : N/A
Encap Tag Sep Range : N/A
Derived Id : N/A
IP prefix : N/A
Matched Objects : mac
Address : pool "ipv4-pool-1"
Auth Policy : radius-auth-1
Acct Policy : N/A
Dupl Acct Policy : N/A
Auth Domain Name : N/A
Diameter app policy : (Not Specified)
Diameter auth policy : (Not Specified)
Rip Policy : N/A
Router Advert Policy : N/A
IPv6 Address : N/A
IPv6 Del Pfx : N/A
IPv6 Slaac Pfx : N/A
IPv6 Address Pool : ipv6-iana-pool-1
IPv6 Del Pfx Pool : ipv6-iapd-pool-1
IPv6 Slaac Pfx Pool : ipv6-slaac-pool-1
IPv6 Del Pfx Length : N/A
DHCPv6 lease times
Renew timer : > 9999 days
Rebind timer : > 9999 days
Preferred lifetime : 0d 00:00:00
Valid lifetime : 0d 00:00:00
DHCP Relay overrides for Subscriber Management
Server Address : N/A
Server IPv6 address : N/A
gi-address : N/A
link-address : N/A
Identification Strings (option 254)
Subscriber Id : N/A
SLA Profile String : sla-profile-1
SPI Sharing Group Id: N/A
Sub Profile String : sub-profile-1
App Profile String : N/A
ANCP String : N/A
Inter Destination Id: N/A
Category Map Name : N/A
Retailer Svc Id : N/A
Service : N/A
Interface : N/A
MSAP defaults
Policy : msap-policy-1
Service : 1000
Group Interface : group-int-1-1
Group Interface Pfx : none
Group Interface Sfx : none
Filter Overrules
Ing Ipv4 Fltr : N/A
Egr Ipv4 Fltr : N/A
Ing Ipv6 Fltr : N/A
Egr Ipv6 Fltr : N/A
===============================================================================show subscriber-mgmt local-user-db "ludb-1" ppp-host "user-1@best.net"===============================================================================
PPP Host "user-1@best.net"
===============================================================================
Admin State : Down
Last Mgmt Change : 02/22/2023 13:03:21
Host Identification
Mac Address : N/A
Circuit Id : N/A
Remote Id : N/A
Sap Id : N/A
Service Name : N/A
User Name : user-1@best.net
Encap Tag Range : N/A
Encap Tag Sep Range : N/A
Derived Id : N/A
Matched Objects : userName
Address : 10.1.1.1/24
Password Type : N/A
PADO Delay : 0msec
Pre Auth Policy : N/A
Auth Policy : radius-auth-1
Padi Auth Policy : N/A
Diameter app policy : (Not Specified)
Diameter auth policy : (Not Specified)
Acct Policy : N/A
Dupl Acct Policy : N/A
User DB : N/A
Rip Policy : N/A
Router Advert Policy : N/A
Retailer Svc Id : 2000
Service : N/A
Interface : N/A
Force IPv6CP : Disabled
IPv6 Address : N/A
IPv6 Del Pfx : N/A
IPv6 Slaac Pfx : N/A
IPv6 Address Pool : ipv6-iana-pool-1
IPv6 Del Pfx Pool : N/A
IPv6 Slaac Pfx Pool : N/A
IPv6 Del Pfx Length : N/A
Ignore DF Bit : Disabled
DHCPv6 lease times
Renew timer : > 9999 days
Rebind timer : > 9999 days
Preferred lifetime : 0d 00:00:00
Valid lifetime : 0d 00:00:00
Identification Strings (option 254)
Subscriber Id : N/A
SLA Profile String : sls-profile-1
SPI Sharing Group Id: N/A
Sub Profile String : sub-profile-1
App Profile String : N/A
ANCP String : N/A
Inter Destination Id: N/A
Category Map Name : N/A
L2TP
Service : N/A
Tunnel Group : N/A
LAC Steering Profile: N/A
MSAP defaults
Policy : N/A
Service : N/A
Group Interface : N/A
Group Interface Pfx : none
Group Interface Sfx : none
Filter Overrules
Ing Ipv4 Fltr : N/A
Egr Ipv4 Fltr : N/A
Ing Ipv6 Fltr : N/A
Egr Ipv6 Fltr : N/A
Access loop info
Circuit ID format : none
Circuit ID : N/A
Remote ID format : none
Remote ID : N/A
PPP policy parameters
Max sessions per mac: N/A
Keepalive :
Interval : 15
Hold-up-multiplier : 2
===============================================================================
|
Field |
Description |
|---|---|
|
Name |
The local user database name |
|
Admin State |
The administrative state of the local user database |
|
Host Count |
The number of hosts associated with the local user database |
|
Description |
The user-provided description of the local user database |
|
Number of Local User Databases |
The number of local user databases configured on the node |
|
Number of Hosts |
The number of hosts configured on the node |
|
Last Mgmt Change |
The sysUpTime at the time of the last modification |
|
DHCP Match Types |
The DHCP match type |
|
DHCP CircId Mask Pfx |
The DHCP circuit ID mask prefix |
|
DHCP CircId Mask Sfx |
The DHCP circuit ID mask suffix |
|
PPPoE Match Types |
The PPPoE match types; circuit-id, derived-id, dual-stack-remote-id, encap-tag-range, ip, mac, option60, remote-id, sap-id, service-id, string, system-id |
|
PPPoE CircId Mask Pfx |
The PPPoE circuit ID mask prefix |
|
PPPoE CircId Mask Sfx |
The PPPoE circuit ID mask suffix |
|
Circuit Id |
The circuit ID to match during host identification |
|
Mac Address |
The MAC address to matching during host identification |
|
Remote Id |
The remote ID from option 82 to match against |
|
Sap Id |
The SAP ID from the Nokia vendor specific sub-option in option 82 to match against |
|
Service Id |
The service ID to match during host identification |
|
String |
The string from the Nokia vendor specific sub-option in option 82 to match against |
|
Option 60 |
The Vendor-Identifying Vendor Option to match against |
|
System Id |
The system ID from the Nokia vendor specific sub-option in option 82 to match against |
|
Subscriber Id |
The subscriber ID which is encoded in the identification strings |
|
SLA Profile String |
The SLA profile string which is encoded in the identification strings |
|
Sub Profile String |
The subscriber profile string which is encoded in the identification strings |
|
App Profile String |
The application profile string which is encoded in the identification strings |
|
ANCP String |
The ANCP string which is encoded in the identification strings |
|
Inter Destination Id |
The intermediate destination identifier which is encoded in the identification strings |
|
Name |
The unmatched host name |
|
Reason |
Indicates why this host is not matched |
|
Duplicate Host |
The name of the host that is already matched and that has the same values, configured for the objects that correspond with the match types, as this unmatched host |
|
Server-Name |
The service name of the unmatched host |
|
Router-Name |
The router name of the unmatched host |
|
Interface-Name |
The interface name of the unmatched host |
|
Service-Id |
The service ID that matches the host identification the Nokia vendor specific sub-option in option 82, or the service where the IPoE session is established |
|
Interface-Name |
The interface name associated with the local user database |
|
Svc-Id Svc-Id |
The service ID associated with the local user database |
|
Type |
The service type |
|
SAP |
The capture SAP associated with the local user database |
|
PPPoE |
PPPoE associated with the capture SAP; Y or N |
|
PPP |
PPPoE associated with the capture SAP; Y or N |
|
IpoE |
IPoE associated with the capture SAP; Y or N |
|
DHCP |
DHCP associated with the capture SAP; Y or N |
|
DHCP6 |
DHCP6 associated with the capture SAP; Y or N |
|
RS |
RS associated with the capture SAP; Y or N |
|
No. of SAP(s) |
The total number of SAPs |
|
Keepalive |
|
|
Interval |
The LCP keepalive interval override value configured for this PPP host. N/A means no override is configured |
|
Hold up multiplier |
The LCP keepalive hold up multiplier override value configured for this PPP host. N/A means no override is configured |
local-user-db
Syntax
local-user-db local-user-db-name
Context
[Tree] (tools>perform>subscr-mgmt local-user-db)
Full Context
tools perform subscriber-mgmt local-user-db
Description
This command provides tools to control the local user database.
Parameters
- local-user-db-name
-
Specifies the name of a local user database up to 32 characters.
Platforms
7705 SAR Gen 2
lockout
lockout
Syntax
lockout router router-id local-gateway-address local-gateway-address mda mda
lockout router router-id local-gateway-address local-gateway-address esa-vm esa-id/vm-id
lockout router router-id local-gateway-address local-gateway-address remote ip-address[:port]
lockout router router-id mda mda
Context
[Tree] (show>ipsec lockout)
Full Context
show ipsec lockout
Description
This command displays the lockout status for the specified IPsec clients. If remote address information is not specified, the system displays a list of clients that have been locked out on the specified ISA, along with the IPsec gateway if local-gateway-address is specified.
Parameters
- router-id
-
Specifies the ID of the router where the IPsec gateway is configured.
- local-gateway-address
-
Specifies the IP address of the local IPsec gateway.
- mda
-
Specifies the MDA ID of the ISA.
- ip-address
-
Specifies the IP address of the remote client.
- port
-
Specifies the port of the remote client.
- esa-vm
-
Displays the ID of the configured ESA and ESA VM.
Platforms
7705 SAR Gen 2
Output
The following output is an example of lockout information.
Output Exampleshow ipsec lockout router 300 local-gateway-address 172.16.100.1 remote
192.168.61.100:500
===============================================================================
IPsec Lockout Client
===============================================================================
Lockout : True
Router ID : 300
Local Gateway Address : 172.16.100.1
Lockout Client Address: 192.168.61.100
Lockout Client Port : 500
No. of Failed Attempts: 2
No. of Dropped Packets: 2
Remaining Block Time : 289 seconds
===============================================================================
lockout
Syntax
lockout router router-id
lockout router router-id local-gateway-address local-gateway-address
lockout router router-id local-gateway-address local-gateway-address remote ip-address[:port]
Context
[Tree] (clear>ipsec lockout)
Full Context
clear ipsec lockout
Description
This command clears the lockout state for the specified clients. If remote address information is not specified, the system clears the lockout state for all clients within the specified routing instance, along with all clients within the specified IPsec gateway if local-gateway-address is specified.
Parameters
- router-id
-
Specifies the ID of the router where the IPsec gateway is configured.
- local-gateway-address
-
Specifies the IP address of the local IPsec gateway.
- ip-address
-
Specifies the IP address of the remote client.
- port
-
Specifies the port of the remote client.
Platforms
7705 SAR Gen 2
log
log
Syntax
log
Context
[Tree] (show log)
Full Context
show log
Description
Commands in this context display event and accounting policy log information.
Platforms
7705 SAR Gen 2
log
Syntax
log
Context
[Tree] (show>service>id log)
Full Context
show service id log
Description
This command displays event and accounting policy log information.
Platforms
7705 SAR Gen 2
log
Syntax
log [bindings]
log log-id [match string]
Context
[Tree] (show>filter log)
Full Context
show filter log
Description
This command shows the contents of a memory-based or a file-based filter log.
If the optional keyword match and string parameter are given, the command displays the given filter log from the first occurrence of the given string.
Parameters
- bindings
-
Displays the number of filter logs currently instantiated.
- log-id
-
Specifies the filter log ID destination expressed as a decimal integer.
- string
-
Specifies to start displaying the filter log entries from the first occurrence of string.
Platforms
7705 SAR Gen 2
Output
The following output is an example of filter log entry information, and Output fields: filter log describes the fields. If log summary is active, the filter log mini-tables contain the information described in Output fields: filter log summary (mini-tables).
Output Example2007/04/13 16:23:09 Filter: 100:100 Desc: Entry-100
Interface: to-ser1 Action: Forward
Src MAC: 04-5b-01-01-00-02 Dst MAC: 04-5d-01-01-00-02 EtherType: 0800
Src IP: 10.10.0.1:646 Dst IP: 10.10.0.4:49509 Flags: TOS: c0
Protocol: TCP Flags: ACK
2007/04/13 16:23:10 Filter: 100:100 Desc: Entry-100
Interface: to-ser1 Action: Forward
Src MAC: 04-5b-01-01-00-02 Dst MAC: 04-5d-01-01-00-02 EtherType: 0800
Src IP: 10.10.0.1:646 Dst IP: 10.10.0.3:646 Flags: TOS: c0
Protocol: UDP
2007/04/13 16:23:12 Filter: 100:100 Desc: Entry-100
Interface: to-ser1 Action: Forward
Src MAC: 04-5b-01-01-00-02 Dst MAC: 01-00-5e-00-00-05 EtherType: 0800
Src IP: 10.10.13.1 Dst IP: 224.0.0.5 Flags: TOS: c0
Protocol: 89
Hex: 02 01 00 30 0a 0a 00 01 00 00 00 00 ba 90 00 00
00 00 00 00 00 00 00 00 ff ff ff 00 00 03 02 01
A:ALA-A>config# show filter log bindings
===============================================================================
Filter Log Bindings
===============================================================================
Total Log Instances (Allowed) : 2046
Total Log Instances (In Use) : 0
Total Log Bindings : 0
-------------------------------------------------------------------------------
Type FilterId EntryId Log Instantiated
-------------------------------------------------------------------------------
No Instances found
===============================================================================
A:ALA-A>config#
A summary log is printed only in case TotCnt is different from 0. Only the address types with at least 1 entry in the mini-table are printed.
A:ALA-A>config# show filter log 190
===============================================================================
Summary Log[190] Crit1: SrcAddr TotCnt: 723 ArpCnt: 83
Mac 8 06-06-06-06-06-06
Mac 8 06-06-06-06-06-05
Mac 8 06-06-06-06-06-04
Mac 8 06-06-06-06-06-03
Mac 8 06-06-06-06-06-02
Ip 16 10.6.6.1
Ip 16 10.6.6.2
Ip 16 10.6.6.3
Ip 16 10.6.6.4
Ip 8 10.6.6.5
Ipv6 8 3ffe:1616:1616:1616:1616:1616::
Ipv6 8 3ffe:1616:1616:1616:1616:1616:ffff:ffff
Ipv6 8 3ffe:1616:1616:1616:1616:1616:ffff:fffe
Ipv6 8 3ffe:1616:1616:1616:1616:1616:ffff:fffd
Ipv6 8 3ffe:1616:1616:1616:1616:1616:ffff:fffc
===============================================================================
A:ALA-A
Log Message Formatting — Each filter log entry contains the following information in case summary log feature is not active (as appropriate).
|
Label |
Description |
|---|---|
|
yyyy/mm/dd hh:mm:ss |
The date and timestamp for the log filter entry where yyyy is the year, mm is the month, dd is the day, hh is the hour, mm is the minute and ss is the second |
|
Filter |
The filter ID and the entry ID which generated the filter log entry in the form Filter_ID:Entry_ID |
|
Desc |
The description of the filter entry ID which generated the filter log entry |
|
Interface |
The IP interface on which the filter ID and entry ID was associated which generated the filter log entry |
|
Action |
The action of the filter entry on the logged packet |
|
Src MAC |
The source MAC address of the logged packet |
|
Dst MAC |
The destination MAC of the logged packet |
|
EtherType |
The Ethernet type of the logged Ethernet type II packet |
|
Src IP |
The source IP address of the logged packet; the source port is displayed after the IP address as appropriate separated with a colon |
|
Dst IP |
The destination IP address of the logged packet; the source port is displayed after the IP address as appropriate separated with a colon |
|
Flags (IP flags) |
M — the more fragments IP flag is set in the logged packet DF — the do not fragment IP flag is set in the logged packet |
|
TOS |
The ToS byte value in the logged packet |
|
Protocol |
The IP protocol of the logged packet (TCP, UDP, ICMP or a protocol number in hex) |
|
Flags (TCP flags) |
URG — Urgent bit set ACK — Acknowledgment bit set RST — Reset bit set SYN — Synchronize bit set FIN — Finish bit set |
|
HEX |
If an IP protocol does not have a supported decode, the first 32 bytes following the IP header are printed in a hex dump Log entries for non-IP packets include the Ethernet frame information and a hex dump of the first 40 bytes of the frame after the Ethernet header |
|
Total Log Instances (Allowed) |
Specifies the maximum allowed instances of filter logs allowed on the system |
|
Total Log Instances (In Use) |
Specifies the instances of filter logs presently existing on the system |
|
Total Log Bindings |
Specifies the count of the filter log bindings presently existing on the system |
|
Type |
The type of service of the service ID |
|
Filter ID |
Uniquely identifies an IP filter as configured on the system |
|
Entry ID |
The identifier which uniquely identifies an entry in a filter table |
|
Log |
Specifies an entry in the filter log table |
|
Instantiated |
Specifies if the filter log for this filter entry has or has not been instantiated |
If the packet being logged does not have a source or destination MAC address (that is, POS) then the MAC information output line is omitted from the log entry.
If log summary is active, the filter log mini-tables contain the information described in Output fields: filter log summary (mini-tables).
|
Label |
Description |
|---|---|
|
Summary Log LogID |
Displays the log ID |
|
Crit1 |
Summary criterion that is used as index into the mini-tables of the log |
|
TotCnt |
The total count of logs |
|
ArpCnt |
Displays the total number of ARP messages logged for this log ID |
|
Src... Dst... |
The address type indication of the key in the mini-table |
|
count |
The number of messages logged with the specified source/destination address |
|
address |
The address for which count messages where received |
log
Syntax
log log-id
Context
[Tree] (clear>filter log)
Full Context
clear filter log
Description
Clears the contents of a memory or file based filter log.
This command has no effect on a syslog based filter log.
Parameters
- log-id
-
Specifies the filter log ID as a decimal integer.
Platforms
7705 SAR Gen 2
log
Syntax
log log-id
Context
[Tree] (clear log)
Full Context
clear log
Description
The clear log log-id command has been deprecated and replaced by the clear log log-id log-id command. The clear log log-id command continues to be supported, but it is recommended to use the clear log log-id log-id command instead.
Parameters
- log-id
-
Specifies the event log ID to be initialized or rolled over.
Platforms
7705 SAR Gen 2
log
Syntax
log
Context
[Tree] (tools>dump log)
Full Context
tools dump log
Description
Commands in this context dump log information.
Platforms
7705 SAR Gen 2
log
Syntax
log
Context
[Tree] (tools>perform log)
Full Context
tools perform log
Description
This command enables tools for event logging.
Platforms
7705 SAR Gen 2
log-collector
log-collector
Syntax
log-collector
Context
[Tree] (show>log log-collector)
Full Context
show log log-collector
Description
This command shows log collector statistics for the main, security, change and debug log collectors.
Platforms
7705 SAR Gen 2
Output
The following output is an example of log collector information.
Output fields: log collector describes log-collector output fields.
Output ExampleA:ALA-1# show log log-collector
===============================================================================
Log Collectors
===============================================================================
Main Logged : 1224 Dropped : 0
Dest Log Id: 99 Filter Id: 0 Status: enabled Dest Type: memory
Dest Log Id: 100 Filter Id: 1001 Status: enabled Dest Type: memory
Security Logged : 3 Dropped : 0
Change Logged : 3896 Dropped : 0
Debug Logged : 0 Dropped : 0
===============================================================================
A:ALA-1#
|
Label |
Description |
|---|---|
|
<Collector Name> |
Main — The main event stream contains the events that are not explicitly directed to any other event stream. Security — The security stream contains all events that affect attempts to breach system security such as failed login attempts, attempts to access MIB tables to which the user is not granted access or attempts to enter a branch of the CLI to which access has not been granted. Change — The change event stream contains all events that directly affect the configuration or operation of this node. Debug — The debug-trace stream contains all messages in the debug stream. |
|
Dest. Log ID |
Specifies the event log stream destination. |
|
Filter ID |
The value is the index to the entry which defines the filter to be applied to this log's source event stream to limit the events output to this log's destination. If the value is 0, then all events in the source log are forwarded to the destination. |
|
Status |
Enabled — Logging is enabled. Disabled — Logging is disabled. |
|
Dest. Type |
Console — A log created with the console type destination displays events to the physical console device. Events are displayed to the console screen whether a user is logged in to the console or not. Session — A user logged in to the console device or connected to the CLI via a remote telnet or SSH session can also create a log with a destination type of 'session'. Events are displayed to the session device until the user logs off. Syslog — Log events are sent to a syslog receiver. SNMP traps — Events defined as SNMP traps are sent to the configured SNMP trap destinations and are logged in NOTIFICATION-LOG-MIB tables. File — All selected log events are directed to a file on one of the compact flash disks. Memory — All selected log events are directed to an in-memory storage area. |
log-events
log-events
Syntax
log-events repeating-events
Context
[Tree] (clear>log log-events)
Full Context
clear log log-events
Description
This command cancels all log events that are currently repeating. All repeating log events will stop repeating. See the repeat parameter of the configure log event-control.
Platforms
7705 SAR Gen 2
log-id
log-id
Syntax
log-id [log-id] [severity severity-level] [application application] [sequence from-seq [to-seq]] [ count count] [subject subject [regexp]] [ ascending | descending] [message format [msg-regexp]]
Context
[Tree] (show>service>id>log log-id)
Full Context
show service id log log-id
Description
This command displays an event log summary with settings and statistics or the contents of a specific log file, SNMP log, or memory log.
If the command is specified with no command line options, a summary of the defined system logs is displayed. The summary includes log settings and statistics.
If the log ID of a memory, SNMP, or file event log is specified, the command displays the contents of the log. Additional command line options control what and how the contents are displayed.
Contents of logs with console, session or syslog destinations cannot be displayed. The actual events can only be viewed on the receiving syslog or console device.
Parameters
- log-id
-
Displays the contents of the specified file log or memory log ID. The log ID must have a destination of an SNMP or file log or a memory log for this parameter to be used.
- severity-level
-
Displays only events with the specified and higher severity.
- application
-
Displays only events generated by the specified application.
- from-seq [to-seq]
-
Displays the log entry numbers from a particular entry sequence number (from-seq) to another sequence number (to-seq). The to-seq value must be larger than the from-seq value.
If the to-seq number is not provided, the log contents to the end of the log is displayed unless the count parameter is present in which case the number of entries displayed is limited by the count.
- count
-
Limits the number of log entries displayed to the number specified.
- subject
-
Displays only log entries matching the specified text subject string, up to 32 characters. The subject is the object affected by the event, for example the port-id would be the subject for a link-up or link-down event.
- regexp
-
Specifies to use a regular expression as parameters with the specified subject string.
- ascending | descending
-
Specifies sort direction. Logs are normally shown from the newest entry to the oldest in descending sequence number order on the screen. When using the ascending parameter, the log is shown from the oldest to the newest entry.
- format
-
Specifies a message string, up to 400 characters, to be used in the display criteria.
- msg-regexp
-
Specifies to use a regular expression as parameters with the specified message string.
Platforms
7705 SAR Gen 2
Output
Output fields: log ID describes the log ID field output.
|
Label |
Description |
|---|---|
|
Log Id |
An event log destination. |
|
Source |
no — The event log filter is not currently in use by a log ID. yes — The event log filter is currently in use by a log ID. |
|
Filter ID |
The value is the index to the entry which defines the filter to be applied to this log's source event stream to limit the events output to this log's destination. If the value is 0, then all events in the source log are forwarded to the destination. |
|
Admin State |
Up — Indicates that the administrative state is up. Down — Indicates that the administrative state is down. |
|
Oper State |
Up — Indicates that the operational state is up. Down — Indicates that the operational state is down. |
|
Logged |
The number of events that have been sent to the log source(s) that were forwarded to the log destination. |
|
Dropped |
The number of events that have been sent to the log source(s) that were not forwarded to the log destination because they were filtered out by the log filter. |
|
Dest. Type |
Console — All selected log events are directed to the system console. If the console is not connected, then all entries are dropped. Syslog — All selected log events are sent to the syslog address. SNMP traps — Events defined as SNMP traps are sent to the configured SNMP trap destinations and are logged in NOTIFICATION-LOG-MIB tables. File — All selected log events are directed to a file on one of the CPM's compact flash disks. Memory — All selected log events are directed to an in-memory storage area. |
|
Dest ID |
The event log stream destination. |
|
Size |
The allocated memory size for the log. |
|
Time format |
The time format specifies the type of timestamp format for events sent to logs where log ID destination is either syslog or file. When the time format is UTC, timestamps are written using the Coordinated Universal Time value. When the time format is local, timestamps are written in the system's local time. |
log-id
Syntax
log-id [log-id | log-name] [severity severity-level] [application application] [sequence from-seq [to-seq]] [ count count] [router router-instance [expression]] [subject subject [regexp]] [ascending | descending] [message message [msg-regexp]]
Context
[Tree] (show>log log-id)
Full Context
show log log-id
Description
This command displays an event log summary with settings and statistics or the contents of a specific log file, SNMP log, or memory log.
If the command is specified with no command line options, a summary of the defined system logs is displayed. The summary includes log settings and statistics.
If the log ID of a memory, SNMP, or file event log is specified, the command displays the contents of the log. Additional command line options control what and how the contents are displayed.
Contents of logs with console, session or syslog destinations cannot be displayed. The actual events can only be viewed on the receiving syslog or console device.
Parameters
- log-id | log-name
-
Displays the contents of the specified file log or memory log ID. The log ID, or optional log name (up to 64 characters), must have a destination of an SNMP or file log or a memory log for this parameter to be used.
- severity-level
-
Displays only events with the specified and higher severity.
- application
-
Displays only events generated by the specified application.
- expression
-
Specifies to use a regular expression as match criteria for the router instance string.
- from-seq [to-seq]
-
Displays the log entry numbers from a particular entry sequence number (from-seq) to another sequence number (to-seq). The to-seq value must be larger than the from-seq value.
If the to-seq number is not provided, the log contents to the end of the log is displayed unless the count parameter is present in which case the number of entries displayed is limited by the count.
- count
-
Limits the number of log entries displayed to the number specified.
- router-instance
-
Specifies a router name up to 32 characters in length to be used in the display criteria.
- message
-
Specifies a message string up to 400 characters in length to be used in the display criteria.
- msg-regexp
-
Specifies to use a regular expression as parameters with the specified message string.
- subject
-
Displays only log entries matching the specified text subject string. The subject is the object affected by the event, for example the port-id would be the subject for a link-up or link-down event.
- regexp
-
Specifies to use a regular expression as parameters with the specified subject string.
- ascending | descending
-
Specifies sort direction. Logs are normally shown from the newest entry to the oldest in descending sequence number order on the screen. When using the ascending parameter, the log is shown from the oldest to the newest entry.
Platforms
7705 SAR Gen 2
Output
The following output is an example of log ID information.
Output fields: log ID describes the log ID field output.
Output ExampleA:bkvm30# show log log-id
==============================================================================
Event Logs
==============================================================================
Log Source Filter Admin Oper Logged Dropped Dest Dest Size
Name/ Id State State Type Id
Id
------------------------------------------------------------------------------
1
1 none none up down 0 0 none N/A
5
5 D none up up 0 0 cli 1024
15
15 M none up up 24 0 cli 512
20
20 S none up up 12 0 memory 256
21
21 C none up up 258 0 memory 256
22
22 M S C none up up 288 0 file 15 N/A
33
33 M S C none up down 0 0 none N/A
34
34 none none up down 0 0 file 33 N/A
35
35 M S none up up 36 0 memory 100
55
55 C none up down 0 0 cli 500
77
77 S none up up 0 0 cli 100
82
82 none none up down 0 0 none N/A
99
99 M none up up 122 0 memory 500
100
100 M 1001 up up 10 112 memory 500
==============================================================================
A:admin@Dut-A# show log log-id log-id 10
===============================================================================
Event Log 10
===============================================================================
Description : (Not Specified)
Memory Log contents [size=100 next event=13 (not wrapped)]
12 2018/02/20 10:12:00.429 UTC MINOR: DEBUG #2001 Base GRPC
"GRPC: RPC-2: gNMI.Subscribe
Client URI: ipv4:192.99.5.0:49648
Username: admin
Received message of type gnmi.SubscribeRequest:
.request = subscribe:
.encoding: 0 = JSON
.mode: 0 = STREAM
.prefix: /
.subscription (1):
.path: /state/router[router-instance=*]/interface[interface-name=*]/ipv4/oper-state
.mode: 1 = ON_CHANGE
.sample_interval: 10000000000
"
11 2018/02/20 10:12:00.422 UTC MINOR: DEBUG #2001 Base GRPC
"GRPC: RPC-2: gNMI.Subscribe
Client URI: ipv4:192.99.5.0:49648
Username: admin
Client called RPC.
Now waiting till first message arrive.
"
A:gal171# show log log-id 99
===============================================================================
Event Log 99
===============================================================================
Description : Default System Log
Memory Log contents [size=500 next event=70 (not wrapped)]
69 2007/01/25 18:20:40.00 UTC CRITICAL: SYSTEM #2029 Base Redundancy
"The active CPM card A is operating in singleton mode. There is no standby CPM card."
68 2007/01/25 17:48:38.16 UTC WARNING: SYSTEM #2006 Base LOGGER
"New event throttle interval 10, configuration modified"
67 2007/01/25 00:34:53.97 UTC CRITICAL: SYSTEM #2029 Base Redundancy
"The active CPM card A is operating in singleton mode. There is no standby CPM card."
66 2007/01/24 22:59:22.00 UTC CRITICAL: SYSTEM #2029 Base Redundancy
"The active CPM card A is operating in singleton mode. There is no standby CPM card."
65 2007/01/24 02:08:47.92 UTC CRITICAL: SYSTEM #2029 Base Redundancy
"The active CPM card A is operating in singleton mode. There is no standby CPM card."
...
===============================================================================
A:gal171
A:NS061550532>config>log>snmp-trap-group# show log log-id 1
===============================================================================
Event Log 1
===============================================================================
SNMP Log contents [size=100 next event=3 (not wrapped)]
Cannot send to SNMP target address 10.1.1.1.
Waiting to replay starting from event #2
14 2000/01/05 00:54:09.11 UTC WARNING: MPLS #2007 Base VR 1:
"Instance is in administrative state: inService, operational state: inService"
13 2000/01/05 00:54:09.11 UTC WARNING: MPLS #2008 Base VR 1:
"Interface linkToIxia is in administrative state: inService, operational state:
inService"
....
===============================================================================
A:NS061550532>config>log>snmp-trap-group#
|
Label |
Description |
|---|---|
|
Log Name/Id |
An event log destination. |
|
Source |
no — The event log filter is not currently in use by a log ID. yes — The event log filter is currently in use by a log ID. |
|
Filter ID |
The value is the index to the entry which defines the filter to be applied to this log's source event stream to limit the events output to this log's destination. If the value is 0, then all events in the source log are forwarded to the destination. |
|
Admin State |
Up — Indicates that the administrative state is up. Down — Indicates that the administrative state is down. |
|
Oper State |
Up — Indicates that the operational state is up. Down — Indicates that the operational state is down. |
|
Logged |
The number of events that have been sent to the log source(s) that were forwarded to the log destination. |
|
Dropped |
The number of events that have been sent to the log source(s) that were not forwarded to the log destination because they were filtered out by the log filter. |
|
Dest. Type |
Console — All selected log events are directed to the system console. If the console is not connected, then all entries are dropped. Syslog — All selected log events are sent to the syslog address. SNMP traps — Events defined as SNMP traps are sent to the configured SNMP trap destinations and are logged in NOTIFICATION-LOG-MIB tables. File — All selected log events are directed to a file on one of the CPM's compact flash disks. Memory — All selected log events are directed to an in-memory storage area. |
|
Dest ID |
The event log stream destination. |
|
Size |
The allocated memory size for the log. |
|
Time format |
The time format specifies the type of timestamp format for events sent to logs where log ID destination is either syslog or file. When the time format is UTC, timestamps are written using the Coordinated Universal Time value. When the time format is local, timestamps are written in the system's local time. |
log-id
Syntax
log-id log-id
Context
[Tree] (clear>log log-id)
Full Context
clear log log-id
Description
Reinitializes or rolls over the specified memory/file event log ID. Memory logs are reinitialized and cleared of contents. File logs are manually rolled over by this command.
This command is only applicable to event logs that are directed to file destinations and memory destinations.
SNMP, syslog, console, or session logs are not affected by this command.
Parameters
- log-id
-
Specifies the event log ID to be initialized or rolled over.
Platforms
7705 SAR Gen 2
logger-event-bundling
logger-event-bundling
Syntax
logger-event-bundling
Context
[Tree] (tools>dump>router>mpls logger-event-bundling)
Full Context
tools dump router mpls logger-event-bundling
Description
This command dumps logger event bundling information for MPLS.
Platforms
7705 SAR Gen 2
longer
longer
Syntax
longer
Context
[Tree] (show>router>bgp>routes longer)
Full Context
show router bgp routes longer
Description
This command displays the specified BGP route and subsets of the route.
Platforms
7705 SAR Gen 2
loopback
loopback
Syntax
loopback
Context
[Tree] (tools>perform>service>id loopback)
Full Context
tools perform service id loopback
Description
Tools for placing and removing SAPs and SDP bindings in data loopback. Overwrite occurs for any SAP or SDP binding when issuing a subsequent loopback command on the same SAP or SDP binding.
Interactions: Loopback functions are only applicable to Epipe, PBB Epipe, VPLS, I-VPLS and PBB core service contexts.
Platforms
7705 SAR Gen 2
loopback
Syntax
loopback
Context
[Tree] (tools>dump>service loopback)
Full Context
tools dump service loopback
Description
This command displays all configured Ethernet loopbacks.
Platforms
7705 SAR Gen 2
loopback
Syntax
loopback sap sap-id
loopback sdp sdp-id:vc-id
Context
[Tree] (tools>dump>service>id loopback)
Full Context
tools dump service id loopback
Description
This command displays configured service-specific Ethernet loopbacks.
Parameters
- sap-id
-
Specifies the SAP ID.
- sdp-id:vc-id
-
Specifies the SDP ID and VC-ID.
Platforms
7705 SAR Gen 2
lsn
lsn
Syntax
lsn create router router-instance [ b4 ipv6-address] [aftr ipv6-address] ip ip-address protocol {tcp | udp} [port port] lifetime lifetime [outside-ip ipv4-address] [outside-port port] [nat-policy nat-policy-name] [force]
lsn delete router router-instance [b4 ipv6-address] ip ip-address protocol {tcp | udp} port port [nat-policy nat-policy-name]
lsn modify router router-instance [ b4 ipv6-address] ip ip-address protocol {tcp | udp} port port lifetime lifetime [nat-policy nat-policy-name]
Context
[Tree] (tools>perform>nat>port-forwarding-action lsn)
Full Context
tools perform nat port-forwarding-action lsn
Description
This command enables large-scale NAT port forwarding actions.
Platforms
7705 SAR Gen 2
Output
The following output is an example of this command.
Output Example*A:SR12_PPPOE# tools perform nat port-forwarding-action lsn create router 100
ip 10.2.3.4 protocol tcp lifetime infinite outside-port 666
*A:SR12_PPPOE# tools perform nat port-forwarding-action lsn create router 100
ip 10.2.3.4 protocol udp lifetime infinite outside-port 666
*A:SR12_PPPOE# configure system persistence nat-port-forwarding location cf3:
*A:SR12_PPPOE# tools dump persistence nat-port-forwarding
----------------------------------------
Persistence Info
----------------------------------------
Client : nat-fwds
File Info :
Filename : cf3:\nat_fwds.002
File State : CLOSED (Not enough space on disk)
Subsystem Info :
Nbr Of Registrations : 524288
Registrations In Use : 2
Subsystem State : NOK
*A:SR12_PPPOE#
show+service+nat
| | | +---port-forwarding-entries
| | | | +---classic-lsn-sub
| | | | +---dslite-lsn-sub
| | | | +---l2-aware-sub
| | | | +---nat64-lsn-sub
lsn-blocks
lsn-blocks
Syntax
lsn-blocks [inside-router router-instance] [inside-ip ip-address] [outside-ip-prefix ip-prefix/length] [outside-port [0..65535]] [pool pool-name]
Context
[Tree] (show>router>nat lsn-blocks)
Full Context
show router nat lsn-blocks
Description
This command displays large scale NAT blocks.
Parameters
- router-instance
-
Specifies the router instance name and service ID.
- ip-address
-
Specifies the IP address in a.b.c.d format.
- ip-prefix
-
Specifies the IP prefix.
- length
-
Specifies the IP prefix length.
- pool-name
-
Specifies the pool name, up to 32 characters.
Platforms
7705 SAR Gen 2
Output
The following output is an example of this command.
Output Example*A:SR12_PPPOE>show>router>nat# show router Base nat lsn-blocks
===============================================================================
Large-Scale NAT blocks for Base
===============================================================================
10.0.0.5 [1024..1527]
Pool : privpool
Policy : priv-nat-policy
Started : 2012/01/28 19:10:17
Inside router : vprn100
Inside IP address : 2001:db8:470:1F00:FFFF:189
-------------------------------------------------------------------------------
Number of blocks: 1
===============================================================================
A:SR12_PPPOE#
lsp
lsp
Syntax
lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp {transit | terminate} [status {up | down}] [from ip-address | to ip-address | lsp-name name] [detail]
lsp count
lsp [lsp-name] activepath [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] [status {up | down}] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] mbb [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] auto-bandwidth [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] [detail] [dns]
Context
[Tree] (show>router>mpls lsp)
Full Context
show router mpls lsp
Description
This command displays LSP details.
Parameters
- lsp-name
-
Specifies the name of the LSP used in the path, up to 64 characters.
- status up
-
Keyword used to display an LSP that is operationally up.
- status down
-
Keyword used to display an LSP that is operationally down.
- from ip-address
-
Displays the IP address of the ingress router for the LSP.
- to ip-address
-
Displays the IP address of the egress router for the LSP.
- detail
-
Keyword used to display detailed information.
- auto-lsp all
-
Keyword used to display all the auto LSP types.
- auto-lsp mesh-p2p
-
Keyword used to display the mesh-p2p auto LSP types.
- auto-lsp one-hop-p2p
-
Keyword used to display the one-hop-p2p auto LSP types.
- transit
-
Keyword used to display the number of static LSPs that transit through the router.
- terminate
-
Keyword used to display the number of static LSPs that terminate at the router.
- count
-
Keyword used to display the total number of LSPs.
- path-name
-
Specifies the LSP path name.
- activepath
-
Keyword used to display the present path being used to forward traffic.
- mbb
-
Keyword used to display make-before-break (MBB) information.
- dns
-
Keyword used to display reverse DNS resolution of actual and explicit hop information.
Platforms
7705 SAR Gen 2
Output
The following output is an example of MPLS LSP and detail information, and Output fields: MPLS LSP and Output fields: LSP detail describes the MPLS LSP output fields.
Output Example# show router mpls lsp
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name To Fastfail Adm Opr
Config
-------------------------------------------------------------------------------
to_10_30_1_1_cspf 10.30.1.1 No Up Up
to_10_30_1_2_cspf 10.30.1.2 No Up Dwn
to_10_30_1_3_cspf 10.30.1.3 No Up Up
to_10_30_1_4_cspf 10.30.1.4 No Up Dwn
to_10_30_1_5_cspf 10.30.1.5 No Up Up
to_10_30_1_6_cspf 10.30.1.6 No Up Dwn
to_10_30_1_110_cspf 10.30.1.110 No Up Up
to_10_8_100_15_cspf 10.8.100.15 No Up Dwn
to_10_20_1_20_cspf 10.20.1.20 No Up Up
to_10_20_1_22_cspf 10.20.1.22 No Up Up
to_10_100_1_1_cspf 10.100.1.1 No Up Dwn
to_10_30_1_1_cspf_2 10.30.1.1 No Up Up
to_10_30_1_1_cspf_3 10.30.1.1 No Up Up
to_10_30_1_1_cspf_4 10.30.1.1 No Up Up
to_10_30_1_1_cspf_5 10.30.1.1 No Up Up
to_10_30_1_1_cspf_6 10.30.1.1 No Up Up
to_10_30_1_1_cspf_7 10.30.1.1 No Up Up
to_10_30_1_1_cspf_8 10.30.1.1 No Up Up
to_10_30_1_1_cspf_9 10.30.1.1 No Up Up
to_10_30_1_1_cspf_10 10.30.1.1 No Up Up
to_10_30_1_1_cspf_11 10.30.1.1 No Up Up
to_10_30_1_1_cspf_12 10.30.1.1 No Up Up
to_10_30_1_1_cspf_13 10.30.1.1 No Up Up
to_10_30_1_1_cspf_14 10.30.1.1 No Up Up
to_10_30_1_1_cspf_15 10.30.1.1 No Up Up
...
-------------------------------------------------------------------------------
LSPs : 201
===============================================================================# show router mpls lsp detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
Legend :
+ - Inherited
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : C_F_1
LSP Type : RegularLsp LSP Tunnel ID : 1
LSP Index : 1 TTM Tunnel Id : 1
From : 10.20.1.3
To : 10.20.1.6
Adm State : Up Oper State : Up
LSP Up Time : 0d 00:07:27 LSP Down Time : 0d 00:00:00
Transitions : 3 Path Changes : 3
Retry Limit : 0 Retry Timer : 20 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 1500
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
PathCompMethod : pce ADSPEC : Enabled
FallbkPathComp : local-cspf
Metric : N/A Metric Type : igp
Load Bal Wt : N/A ClassForwarding : Disabled
Include Grps : Exclude Grps :
None None
Least Fill : Disabled
BFD Template : None BFD Ping Intvl : 60
BFD Enable : False BFD Failure-action : None
WaitForUpTimer : 4
Revert Timer : Disabled Next Revert In : N/A
Entropy Label : Enabled+ Oper Entropy Label : Enabled
Negotiated EL : Disabled
Auto BW : Disabled
LdpOverRsvp : Enabled
VprnAutoBind : Enabled
IGP Shortcut : Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : 100
Prop Adm Grp : Disabled
PCE Report : Enabled Binding SID : 1234
PCE Control : Enabled
Path Profile : None
Admin Tags : None
Lsp Self Ping : Disabled+ Self Ping Timeouts : 0
SelfPingOAMFail*: 0
Primary(a) : C_F_1
Up Time : 0d 00:07:28
Bandwidth : 0 Mbps
===============================================================================
* indicates that the corresponding row element may have been truncated.
# show router mpls lsp "lspE" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : lspE
LSP Type : RegularLsp LSP Tunnel ID : 1005
LSP Index : 1005 TTM Tunnel Id : 1005
From : 10.20.1.3 To : 10.20.1.5
Adm State : Up Oper State : Up
LSP Up Time : 0d 00:19:23 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 20 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 1500
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Disabled ADSPEC : Disabled
Metric : N/A
Load Bal Wt : N/A ClassForwarding: Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
BFD Template: None BFD Ping Intvl : 60
BFD Enable : FALSE BFD failure-ac*: down
Revert Timer: Disabled Next Revert In : N/A
EntropyLbl : Inherited Oper EntropyLbl: Enabled
Auto BW : Disabled
LdpOverRsvp : Enabled
VprnAutoBind: Enabled
IGP Shortcut: Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : 16777215
Prop Adm Grp: Disabled
Primary(a) : E1 Up Time : 0d 00:19:32
Bandwidth : 0 Mbps
Standby : E2 Down Time : 0d 00:19:46
Bandwidth : 0 Mbps
===============================================================================
# show router mpls lsp "to_10_30_1_1_cspf"
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name To Fastfail Adm Opr
Config
-------------------------------------------------------------------------------
to_10_30_1_1_cspf 10.30.1.1 No Up Up
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
*A:SRU4>config>router>mpls#
# show router mpls lsp "to_10_30_1_1_cspf" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : to_10_30_1_1_cspf
LSP Type : RegularLsp LSP Tunnel ID : 1
From : 10.30.1.4
Adm State : Up Oper State : Up
LSP Up Time : 0d 01:47:02 LSP Down Time : 0d 00:00:00
Transitions : 11 Path Changes : 11
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 1500
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Enabled ADSPEC : Disabled
Metric : 0 Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
LdpOverRsvp : Enabled VprnAutoBind : Enabled
IGP Shortcut: Enabled
Oper Metric : 1001
Primary(a) : to_10_30_1_1 Up Time : 0d 01:47:02
Bandwidth : 0 Mbps
===============================================================================
*A:SRU4>config>router>mpls#
# show router mpls lsp detail to 10.30.1.2
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : 1
LSP Type : RegularLsp LSP Tunnel ID : 1
From : 0.0.0.0
Adm State : Down Oper State : Down
LSP Up Time : 0d 00:00:00 LSP Down Time : 0d 00:00:07
Transitions : 0 Path Changes : 0
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 0
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Disabled ADSPEC : Disabled
Metric : 0
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Auto BW : Enabled AB OpState : Down
Auto BW Min : 0 Mbps Auto BW Max : 100000 Mbps
AB Up Thresh: 5 percent AB Down Thresh : 5 percent
AB Up BW : 0 Mbps AB Down BW : 0 Mbps
AB Curr BW : 0 Mbps AB Samp Intv : 0
AB Adj Mul : 288+ AB Samp Mul : 1+
AB Adj Time : 0 Mins AB Samp Time : 0 Mins
AB Adj Cnt : 0 AB Samp Cnt : 0
AB Last Adj : n/a AB Next Adj : 0 Mins
ABMaxAvgRt : 0 Mbps AB Lst AvgRt : 0 Mbps
AB Ovfl Lmt : 0 AB Ovfl Cnt : 0
ABOvflThres : 0 percent AB Ovfl BW : 0
AB Adj Cause: none AB Monitor BW : False
LdpOverRsvp : Enabled VprnAutoBind : Enabled
IGP Shortcut: Enabled
Oper Metric : 65535
+ indicates inherited values
===============================================================================
# show router mpls lsp lsp1 detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : lsp1
LSP Type : RegularLsp LSP Tunnel ID : 1
LSP Index : 1 TTM Tunnel Id : 1
From : 10.20.1.2 To : 10.20.1.5
Adm State : Up Oper State : Up
LSP Up Time : 0d 00:00:38 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 20 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 1500
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Enabled ADSPEC : Disabled
Metric : N/A Use TE metric : Disabled
Load Bal Wt : N/A ClassForwarding : Disabled
Include Grps : Exclude Grps :
None None
Least Fill : Disabled
BFD Template : bfdTemp1 BFD Ping Intvl : 60
BFD Enable : True BFD Failure-action : Failover
Revert Timer : Disabled Next Revert In : N/A
Entropy Label : Inherited Oper Entropy Label : Enabled
Negotiated EL : Disabled
Auto BW : Disabled
LdpOverRsvp : Enabled
VprnAutoBind : Enabled
IGP Shortcut : Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : 2000
Prop Adm Grp : Disabled
PCE Report : Disabled+ Binding SID : 1234
PCE Compute : Disabled PCE Control : Disabled
Path Profile : None
Primary(a) : path1 Up Time : 0d 00:00:40
Bandwidth : 0 Mbps
# show router mpls lsp "N1.N2.3" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : N1.N2.3
LSP Type : RegularLsp LSP Tunnel ID : 132
From : 192.168.0.1 To : 192.168.0.2
Adm State : Up Oper State : Up
LSP Up Time : 0d 00:01:07 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 2
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 1500
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Enabled ADSPEC : Disabled
Metric : 9 Use TE metric : Disabled
Load Balanc*: 100
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Revert Timer: Disabled Next Revert In : N/A
Auto BW : Disabled
LdpOverRsvp : Enabled VprnAutoBind : Enabled
IGP Shortcut: Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : 9
Prop Adm Grp: Disabled
Primary(a) : path.N1.N2.3 Up Time : 0d 00:01:04
Bandwidth : 0 Mbps
Secondary : path.N1.N2.4 Down Time : 0d 00:01:00
Bandwidth : 0 Mbps
===============================================================================
# show router mpls lsp "LSP-PE-2-PE-4" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : LSP-PE-2-PE-4
LSP Type : RegularLsp LSP Tunnel ID : 4
LSP Index : 4 TTM Tunnel Id : 4
From : 192.0.2.104 To : 192.0.2.102
Adm State : Up Oper State : Up
LSP Up Time : 17d 02:16:53 LSP Down Time : 0d 00:00:00
Transitions : 3 Path Changes : 3
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 8690
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Disabled ADSPEC : Disabled
Metric : N/A
Load Bal Wt : N/A ClassForwarding: Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
BFD Template: None BFD Ping Intvl : 60
BFD Enable : False
Revert Timer: Disabled Next Revert In : N/A
EntropyLbl : Inherited
Auto BW : Enabled AB OpState : Down
Auto BW Min : 0 Mbps Auto BW Max : 100000 Mbps
AB Up Thresh: 5 percent AB Down Thresh : 5 percent
AB Up BW : 0 Mbps AB Down BW : 0 Mbps
AB Curr BW : 0 Mbps AB Samp Intv : 0 Mins
AB Adj Mul : 288+ AB Samp Mul : 1+
AB Adj Time : 0 Mins AB Samp Time : 0 Mins
AB Adj Cnt : 0 AB Samp Cnt : 0
AB Last Adj : n/a AB Next Adj : 0 Mins
ABMaxAvgRt : 0 Mbps AB Lst AvgRt : 0 Mbps
AB Ovfl Lmt : 0 AB Ovfl Cnt : 0
ABOvflThres : 0 percent AB Ovfl BW : 0 Mbps
AB UndflLmt : 0 AB Undrfl Cnt : 0
ABUndflThrs : 0 percent AB Undrfl BW : 0 Mbps
ABMaxUndflBW: 0 Mbps
AB Adj Cause: none AB Monitor BW : False
Be Weight : 100 percent Af Weight : 100 percent
L1 Weight : 100 percent L2 Weight : 100 percent
Nc Weight : 100 percent Ef Weight : 100 percent
H1 Weight : 100 percent H2 Weight : 100 percent
LdpOverRsvp : Enabled
VprnAutoBind: Enabled
IGP Shortcut: Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : 1
Prop Adm Grp: Disabled
Primary(a) : completely-loose-path Up Time : 17d 02:16:53
Bandwidth : 0 Mbps
===============================================================================
The following output is an example of MPLS LSP count information.
Output Example# show router mpls lsp count
===============================================================================
MPLS LSP Count
===============================================================================
Originate Transit Terminate
-------------------------------------------------------------------------------
Static LSPs 0 0 0
Dynamic LSPs 155 0 171
P2P LSPs 143 N/A N/A
Detour LSPs 0 0 0
P2MP S2Ls 0 0 0
MPLS-TP LSPs 0 0 0
Mesh-P2P LSPs 0 N/A N/A
One Hop-P2P LSPs 0 N/A N/A
SR-TE LSPs 400 N/A N/A
Mesh-P2P SR-TE LSPs 0 N/A N/A
One Hop-P2P SR-TE LSPs 0 N/A N/A
PCE Init SR-TE LSPs 0 N/A N/A
===============================================================================
The following output is an example of MPLS LSP transit information.
Output Example# show router mpls lsp transit
===============================================================================
MPLS LSPs (Transit)
===============================================================================
Legend : @ - Active Detour
===============================================================================
From To In I/F Out I/F State LSP Name
-------------------------------------------------------------------------------
10.30.1.5 10.20.1.22 3/2/1 3/2/7 Up to_10_20_1_22_cspf::to*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_3::*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_4::*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_2::*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_20:*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_18:*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_19:*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_17:*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_16:*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_15:*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_13:*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_14:*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_12:*
10.30.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_10:*
...
10.30.1.3 10.20.1.22 aps-1 3/2/7 Up to_10_20_1_22_cspf_6::*
10.30.1.3 10.20.1.22 aps-1 3/2/7 Up to_10_20_1_22_cspf::to*
10.30.1.3 10.20.1.22 aps-1 3/2/7 Up to_10_20_1_22_cspf_9::*
-------------------------------------------------------------------------------
LSPs : 520
===============================================================================
* indicates that the corresponding row element may have been truncated.The following output is an example of MPLS LSP terminate information.
Output Example# show router mpls lsp terminate
===============================================================================
MPLS LSPs (Terminate)
===============================================================================
Legend : @ - Active Detour
===============================================================================
From To In I/F Out I/F State LSP Name
-------------------------------------------------------------------------------
10.30.1.5 10.30.1.4 3/2/1 n/a Up b4-1::b4-1
10.30.1.5 10.30.1.4 3/2/7 n/a Up gsr::gsr
10.20.1.22 10.30.1.4 3/2/7 n/a Up gsr2_t10
10.30.1.6 10.30.1.4 3/2/3:10 n/a Up 1::2
10.30.1.6 10.30.1.4 3/2/3:3 n/a Up 1::stby
10.30.1.6 10.30.1.4 3/2/3:10 n/a Up 2::2
10.30.1.6 10.30.1.4 3/2/3:6 n/a Up 2::stby
10.30.1.6 10.30.1.4 3/2/3:10 n/a Up 3::2
10.30.1.6 10.30.1.4 3/2/3:6 n/a Up 3::stby
...
10.30.1.3 10.30.1.4 aps-1 n/a Up to_10_30_1_4_cspf_20:*
10.30.1.3 10.30.1.4 aps-1 n/a Up to_10_30_1_4_cspf_4::*
-------------------------------------------------------------------------------
LSPs : 1603
===============================================================================
* indicates that the corresponding row element may have been truncated.
# show router mpls lsp terminate detail
===============================================================================
MPLS LSPs (Terminate) (Detail)
===============================================================================
-------------------------------------------------------------------------------
LSP b4-1::b4-1
-------------------------------------------------------------------------------
From : 10.30.1.5 To : 10.30.1.4
State : Up
SetupPriority : 7 Hold Priority : 0
Class Type : 0
In Interface : 3/2/1 In Label : 131071
Previous Hop : 10.100.30.20
-------------------------------------------------------------------------------
LSP gsr::gsr
-------------------------------------------------------------------------------
From : 10.30.1.5 To : 10.30.1.4
State : Up
SetupPriority : 7 Hold Priority : 0
Class Type : 0
In Interface : 3/2/7 In Label : 128547
Previous Hop : 192.168.60.2
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
From : 10.30.1.3 To : 10.30.1.4
State : Up
SetupPriority : 7 Hold Priority : 0
Class Type : 0
In Interface : aps-1 In Label : 130409
Previous Hop : 192.168.0.3
===============================================================================
CBF Info —To see CBF information of the LSP:
# show router mpls lsp "11-4" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
Legend :
+ - Inherited
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : 11-4
LSP Type : RegularLsp LSP Tunnel ID : 83
LSP Index : 83 TTM Tunnel Id : 83
From : 10.20.1.2 To : 10.20.1.5
Adm State : Up Oper State : Up
LSP Up Time : 0d 00:15:33 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 1500
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
Egress Stats : Enabled Egress Oper State : N/A
CSPF : Enabled ADSPEC : Disabled
Metric : N/A Use TE metric : Disabled
Load Bal Wt : N/A ClassForwarding : Enabled
CBF FC : None CBF Default LSP : No
CBF Fwding Plcy : policy1
CBF Fwding Set : 4
Include Grps : Exclude Grps :
None None
Least Fill : Disabled
BFD Template : None BFD Ping Intvl : 60
BFD Enable : False BFD Failure-action : None
Revert Timer : Disabled Next Revert In : N/A
Entropy Label : Enabled+ Oper Entropy Label : Enabled
Negotiated EL : Disabled
Auto BW : Disabled
LdpOverRsvp : Enabled
VprnAutoBind : Enabled
IGP Shortcut : Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : 2000
Prop Adm Grp : Disabled
PCE Report : Disabled+ Binding SID : 1234
PCE Compute : Disabled PCE Control : Disabled
Path Profile : None
Primary(a) : 1 Up Time : 0d 00:15:33
Bandwidth : 0 Mbps
===============================================================================
The following output is an example of MPLS LSP path and path detail information and Output fields: MPLS LSP path describe the MPLS LSP path output fields.
Output Example# show router mpls lsp path
===============================================================================
MPLS LSP Path (Detail)
===============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - loose
===============================================================================
ExplicitHops:
10.20.1.3(L) -> 10.20.1.4(S)
Actual Hops :
10.10.1.1(10.20.1.1) Record Label : N/A
-> 10.10.1.2(10.20.1.2) Record Label : 131071
-> 10.10.5.3(10.20.1.3) Record Label : 131071
-> 10.10.7.4(10.20.1.4) Record Label : 131071
-> 10.10.8.5(10.20.1.5) Record Label : 131071
ComputedHops:
10.10.1.1(S) -> 10.10.1.2(S) -> 10.10.5.3(S)
-> 10.20.1.4(S) -> 10.20.1.5(L)
===============================================================================
# show router mpls lsp "lsp_1" path "500" detail
===============================================================================
MPLS LSP lsp_1 Path 500 (Detail)
===============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP lsp_1 Path 500
-------------------------------------------------------------------------------
LSP Name : lsp_1
Path LSP ID : 38400
From : 10.10.1.1 To : 10.10.1.2
Admin State : Up Oper State : Down
Path Name : 500 Path Type : Primary
Path Admin : Up Path Oper : Down
Out Interface : n/a Out Label : n/a
Path Up Time : 0d 00:00:00 Path Down Time : 0d 00:00:43
Retry Limit : 0 Retry Timer : 30 sec
Retry Attempt : 2 Next Retry In : 19 sec
BFD Template : None BFD Ping Interval : 60
BFD Enable : FALSE BFD failure-action : down
Adspec : Disabled Oper Adspec : N/A
CSPF : Disabled Oper CSPF : N/A
Least Fill : Disabled Oper LeastFill : N/A
FRR : Disabled Oper FRR : N/A
Prop Adm Grp : Disabled Oper Prop AG : N/A
Inter-area : N/A
Neg MTU : 0 Oper MTU : N/A
Bandwidth : No Reservation Oper Bw : N/A
Hop Limit : 255 Oper HopLimit : N/A
Record Route : Record Oper Rec Route : N/A
Record Label : No Record Oper Rec Label : N/A
Setup Priority : 7 Oper Setup Priority : N/A
Hold Priority : 7 Oper Hold Priority : N/A
Class Type : 7 Oper CT : N/A
Backup CT : 5
MainCT Retry : 500
Rem :
MainCT Retry : 500
Limit :
Include Grps : Oper InclGrps :
None N/A
Exclude Grps : Oper ExclGrps :
None N/A
Adaptive : Enabled Oper Metric : N/A
Preference : n/a
Path Trans : 0 CSPF Queries : 0
Failure Code : noResourcesAvailable
Failure Node : 10.1.255.255
Explicit Hops :
No Hops Specified
Actual Hops :
No Hops Specified
Resignal Eligible: False
Last Resignal : n/a CSPF Metric : N/A
===============================================================================
# show router mpls lsp "1" path detail
=======================================================================
MPLS LSP 1 Path (Detail)
=======================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
A - ABR
=======================================================================
-----------------------------------------------------------------------
LSP 1 Path 1
-----------------------------------------------------------------------
LSP Name : 1 Path LSP ID : 30208
From : 10.20.1.1 To : 10.20.1.6
Adm State : Up Oper State : Up
Path Name : 1 Path Type : Primary
Path Admin : Up Path Oper : Up
OutInterface: 1/1/1 Out Label : 131071
Path Up Time: 0d 00:00:05 Path Dn Time: 0d 00:00:00
Retry Limit : 0 Retry Timer : 30 sec
RetryAttempt: 0 NextRetryIn : 0 sec
Adspec : Disabled Oper Adspec : Disabled
CSPF : Enabled Oper CSPF : Enabled
Least Fill : Disabled Oper LeastF*: Disabled
FRR : Enabled Oper FRR : Enabled
FRR NodePro*: Enabled Oper FRR NP : Enabled
FR Hop Limit: 16 Oper FRHopL*: 16
FR Prop Adm*: Disabled Oper FRProp*: Disabled
Prop Adm Grp: Disabled Oper PropAG : Disabled
Inter-area : False
Neg MTU : 1496 Oper MTU : 1496
Bandwidth : No Reservation Oper Bw : 0 Mbps
Hop Limit : 255 Oper HopLim*: 255
Record Route: Record Oper RecRou*: Record
Record Label: Record Oper RecLab*: Record
SetupPriori*: 7 Oper SetupP*: 7
Hold Priori*: 0 Oper HoldPr*: 0
Class Type : 0 Oper CT : 0
Backup CT : None
MainCT Retry: n/a
Rem :
MainCT Retry: 0
Limit :
Include Grps: Oper InclGr*:
None None
Exclude Grps: Oper ExclGr*:
None None
Adaptive : Enabled Oper Metric : 3000
Preference : n/a
Path Trans : 1 CSPF Queries: 1
Failure Code: noError Failure Node: n/a
ExplicitHops:
No Hops Specified
Actual Hops :
10.20.1.1, If Index : 2 @ n Record Label : N/A
-> 10.20.1.2, If Index : 2 @ n Record Label : 131071
-> 10.20.1.4, If Index : 2 Record Label : 131071
-> 10.20.1.6, If Index : 2 Record Label : 131071
ComputedHops:
10.20.1.1, If Index : 2(S)
-> 10.20.1.2, If Index : 2(S)
-> 10.20.1.4, If Index : 2(S)
-> 10.20.1.6, If Index : 2(S)
ResigEligib*: False
LastResignal: n/a CSPF Metric : 3000
=======================================================================
* indicates that the corresponding row element may have been truncated.
# show router mpls lsp "lsp_1" path "500" detail
===============================================================================
MPLS LSP lsp_1 Path 500 (Detail)
===============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP lsp_1 Path 500
-------------------------------------------------------------------------------
LSP Name : lsp_1
Path LSP ID : 38400
From : 10.10.1.1 To : 10.10.1.2
Admin State : Up Oper State : Down
Path Name : 500 Path Type : Primary
Path Admin : Up Path Oper : Down
Out Interface : n/a Out Label : n/a
Path Up Time : 0d 00:00:00 Path Down Time : 0d 00:00:43
Retry Limit : 0 Retry Timer : 30 sec
Retry Attempt : 2 Next Retry In : 19 sec
BFD Template : None BFD Ping Interval : 60
BFD Enable : FALSE
Adspec : Disabled Oper Adspec : N/A
CSPF : Disabled Oper CSPF : N/A
Least Fill : Disabled Oper LeastFill : N/A
FRR : Disabled Oper FRR : N/A
Prop Adm Grp : Disabled Oper Prop AG : N/A
Inter-area : N/A
Neg MTU : 0 Oper MTU : N/A
Bandwidth : No Reservation Oper Bw : N/A
Hop Limit : 255 Oper HopLimit : N/A
Record Route : Record Oper Rec Route : N/A
Record Label : No Record Oper Rec Label : N/A
Setup Priority : 7 Oper Setup Priority : N/A
Hold Priority : 7 Oper Hold Priority : N/A
Class Type : 7 Oper CT : N/A
Backup CT : 5
MainCT Retry : 500
Rem :
MainCT Retry : 500
Limit :
Include Grps : Oper InclGrps :
None N/A
Exclude Grps : Oper ExclGrps :
None N/A
Adaptive : Enabled Oper Metric : N/A
Preference : n/a
Path Trans : 0 CSPF Queries : 0
Failure Code : noResourcesAvailable
Failure Node : 10.1.255.255
Explicit Hops :
No Hops Specified
Actual Hops :
No Hops Specified
Resignal Eligible: False
Last Resignal : n/a CSPF Metric : N/A
===============================================================================
# show router mpls lsp path detail
===============================================================================
MPLS LSP Path (Detail)
===============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
A - ABR + - Inherited
===============================================================================
-------------------------------------------------------------------------------
LSP C_F_1
Path C_F_1
-------------------------------------------------------------------------------
LSP Name : C_F_1
From : 10.20.1.3
To : 10.20.1.6
Admin State : Up Oper State : Up
Path Name : C_F_1
Path LSP ID : 49666 Path Type : Primary
Path Admin : Up Path Oper : Up
Out Interface : 1/1/1 Out Label : 524248
Path Up Time : 0d 00:07:18 Path Down Time : 0d 00:00:00
Retry Limit : 0 Retry Timer : 20 sec
Retry Attempt : 0 Next Retry In : 0 sec
BFD Configuration and State
Template : None Ping Interval : 60
Enable : False State : notApplicable
WaitForUpTimer : 4 sec OperWaitForUpTimer: N/A
WaitForUpTmLeft : 0 sec
Adspec : Enabled Oper Adspec : Enabled
PathCompMethod : pce OperPathCompMethod: pce
MetricType : igp Oper MetricType : igp
Least Fill : Disabled Oper LeastFill : Disabled
FRR : Disabled Oper FRR : Disabled
Propagate Adm Grp: Disabled Oper Prop Adm Grp : Disabled
Inter-area : N/A
PCE Report : Enabled Oper PCE Report : Enabled
PCE Control : Enabled Oper PCE Control : Enabled
PCE Update ID : 0
Neg MTU : 1500 Oper MTU : 1500
Bandwidth : No Reservation Oper Bandwidth : 0 Mbps
Hop Limit : 255 Oper HopLimit : 255
Record Route : Record Oper Record Route : Record
Record Label : Record Oper Record Label : Record
Setup Priority : 7 Oper SetupPriority: 7
Hold Priority : 0 Oper HoldPriority : 0
Class Type : 0 Oper CT : 0
Backup CT : None
MainCT Retry : n/a
Rem :
MainCT Retry : 0
Limit :
Include Groups : Oper IncludeGroups:
None None
Exclude Groups : Oper ExcludeGroups:
None None
Adaptive : Enabled Oper Metric : 100
Preference : n/a
Path Trans : 3 CSPF Queries : 0
Failure Code : noError
Failure Node : n/a
Explicit Hops :
No Hops Specified
Actual Hops :
10.10.2.3(10.20.1.3) Record Label : N/A
-> 10.10.2.1(10.20.1.1) Record Label : 524248
-> 10.10.1.2(10.20.1.2) Record Label : 524246
-> 10.10.4.4(10.20.1.4) Record Label : 524246
-> 10.10.9.6(10.20.1.6) Record Label : 524248
Computed Hops :
10.10.2.1(S)
-> 10.10.1.2(S)
-> 10.10.4.4(S)
-> 10.10.9.6(S)
Resignal Eligible: False
Last Resignal : n/a CSPF Metric : 100
===============================================================================
# show router mpls lsp path mbb
===============================================================================
MPLS LSP Paths
===============================================================================
-------------------------------------------------------------------------------
LSP to_10_30_1_1_cspf Path to_10_30_1_1
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 1001
Last MBB :
MBB Type : TimerBasedResignal MBB State : Fail
Ended At : 03/04/2010 09:23:58 Old Metric : 0
-------------------------------------------------------------------------------
LSP to_10_30_1_2_cspf Path to_10_30_1_2
-------------------------------------------------------------------------------
LastResignal: 03/04/2010 09:23:58 CSPF Metric : 65535
-------------------------------------------------------------------------------
LSP to_10_30_1_3_cspf Path to_10_30_1_3
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 1001
Last MBB :
MBB Type : TimerBasedResignal MBB State : Fail
Ended At : 03/04/2010 09:23:58 Old Metric : 0
-------------------------------------------------------------------------------
LSP to_10_30_1_4_cspf Path to_10_30_1_4
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_30_1_5_cspf Path to_10_30_1_5
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_100_1_1_cspf_19 Path to_10_100_1_1
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_100_1_1_cspf_20 Path to_10_100_1_1
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 0
===============================================================================# show router mpls lsp path detail tof1
==============================================================================
MPLS LSP tof1 Path (Detail)
==============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
------------------------------------------------------------------------------
LSP tof1 Path 1
------------------------------------------------------------------------------
LSP Name : tof1 Path LSP ID : 4706
From : 10.20.1.2 To : 10.20.1.4
Adm State : Up Oper State : Up
Path Name : 1 Path Type : Primary
Path Admin : Up Path Oper : Up
OutInterface: 1/1/2:5 Out Label : 124809
Path Up Time: 0d 00:01:16 Path Dn Time: 0d 00:00:00
Retry Limit : 0 Retry Timer : 20 sec
RetryAttempt: 0 NextRetryIn : 0 sec
SetupPriori*: 4 Hold Priori*: 4
Bandwidth : 1 Mbps Oper Bw : 1 Mbps
Hop Limit : 255 Class Type : 5
Record Route: Record Record Label: Record
Oper MTU : 1492 Neg MTU : 1492
Adaptive : Enabled Oper Metric : 1000
Include Grps: Exclude Grps:
None None
Path Trans : 2 CSPF Queries: 1
Failure Code: noError Failure Node: n/a
ExplicitHops:
10.20.1.4
Actual Hops :
10.10.105.2(10.20.1.2) @ s Record Label : N/A
-> 10.10.105.4(10.20.1.4) Record Label : 124809
ComputedHops:
10.10.105.2 -> 10.10.105.4
ResigEligib*: False
LastResignal: n/a CSPF Metric : 1000
In Prog MBB :
MBB Type : SoftPreemption NextRetryIn : 19 sec
Started At : 12/08/2008 22:21:11 RetryAttempt: 0
FailureCode: noError Failure Node: n/a
==============================================================================
*A:Dut-B#
# show router mpls lsp "From Reno to Atlanta RSVP-TE" path detail
===============================================================================
MPLS LSP From Reno to Atlanta RSVP-TE Path (Detail)
===============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP From Reno to Atlanta RSVP-TE Path primary_empty
-------------------------------------------------------------------------------
LSP Name : From Reno to Atlanta RSVP-TE
Path LSP ID : 14382
From : 192.168.48.194 To : 192.168.48.224
Admin State : Up Oper State : Up
Path Name : primary_empty Path Type : Primary
Path Admin : Up Path Oper : Up
Out Interface : 1/1/1 Out Label : 262094
Path Up Time : 0d 00:00:22 Path Down Time : 0d 00:00:00
Retry Limit : 0 Retry Timer : 30 sec
Retry Attempt : 0 Next Retry In : 0 sec
BFD Template : None BFD Ping Interval : 60
BFD Enable : False
Adspec : Disabled Oper Adspec : Disabled
CSPF : Enabled Oper CSPF : Enabled
Least Fill : Disabled Oper LeastFill : Disabled
FRR : Enabled Oper FRR : Enabled
FRR NodeProtect : Disabled Oper FRR NP : Disabled
FR Hop Limit : 16 Oper FRHopLimit : 16
FR Prop Admin Gr*: Disabled Oper FRPropAdmGrp : Disabled
Propagate Adm Grp: Disabled Oper Prop Adm Grp : Disabled
Inter-area : False
PCE Updt ID : 0
PCE Report : Enabled Oper PCE Report : Enabled
PCE Control : Enabled Oper PCE Control : Enabled
PCE Compute : Enabled
Neg MTU : 1496 Oper MTU : 1496
Bandwidth : 10 Mbps Oper Bandwidth : 10 Mbps
Hop Limit : 255 Oper HopLimit : 255
Record Route : Record Oper Record Route : Record
Record Label : Record Oper Record Label : Record
Setup Priority : 7 Oper Setup Priority : 7
Hold Priority : 0 Oper Hold Priority : 0
Class Type : 0 Oper CT : 0
Backup CT : None
MainCT Retry : n/a
Rem :
MainCT Retry : 0
Limit :
Include Groups : Oper Include Groups :
None None
Exclude Groups : Oper Exclude Groups :
top top
Adaptive : Enabled Oper Metric : 40
Preference : n/a
Path Trans : 7 CSPF Queries : 7172
Failure Code : noError
Failure Node : n/a
Explicit Hops :
No Hops Specified
Actual Hops :
10.202.5.194 (192.168.48.194) @ Record Label : N/A
-> 10.202.5.199 (192.168.48.199) @ Record Label : 262094
-> 192.168.48.185 (192.168.48.185) Record Label : 262111
-> 10.0.5.185 Record Label : 262111
-> 192.168.48.223 (192.168.48.223) Record Label : 262121
-> 10.0.7.223 Record Label : 262121
-> 192.168.48.224 (192.168.48.224) Record Label : 262116
-> 10.101.4.224 Record Label : 262116
Computed Hops :
10.202.5.199(S)
-> 10.0.5.185(S)
-> 10.0.7.223(S)
-> 10.101.4.224(S)
Resignal Eligible: False
Last Resignal : n/a CSPF Metric : 40
-------------------------------------------------------------------------------
LSP From Reno to Atlanta RSVP-TE Path secondary_empty
-------------------------------------------------------------------------------
LSP Name : From Reno to Atlanta RSVP-TE
Path LSP ID : 14384
From : 192.168.48.194 To : 192.168.48.224
Admin State : Up Oper State : Up
Path Name : secondary_empty Path Type : Standby
Path Admin : Up Path Oper : Up
Out Interface : 1/
The following output is an example of MPLS LSP path detailed DNS information, and Output fields: MPLS LSP path describes the MPLS LSP path DNS output fields.
Output Example*A:Dut-C# show router mpls lsp "C_F_1" path detail dns
===============================================================================
MPLS LSP C_F_1 Path (Detail)
===============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
A - ABR + - Inherited
===============================================================================
-------------------------------------------------------------------------------
LSP C_F_1
Path C_F_1
-------------------------------------------------------------------------------
LSP Name : C_F_1
From : 10.20.1.3
To : 10.20.1.6
Admin State : Up Oper State : Up
Path Name : C_F_1
Path LSP ID : 1536 Path Type : Primary
Path Admin : Up Path Oper : Up
Out Interface : 1/1/1 Out Label : 524281
Path Up Time : 0d 00:01:39 Path Down Time : 0d 00:00:00
Retry Limit : 0 Retry Timer : 600 sec
Retry Attempt : 0 Next Retry In : 0 sec
BFD Configuration and State
Template : None Ping Interval : 60
Enable : False State : notApplicable
WaitForUpTimer : 4 sec OperWaitForUpTimer: N/A
WaitForUpTmLeft : 0 sec
Adspec : Enabled Oper Adspec : Enabled
PathCompMethod : local-cspf OperPathCompMethod: local-cspf
MetricType : te Oper MetricType : te
Least Fill : Disabled Oper LeastFill : Disabled
FRR : Enabled Oper FRR : Enabled
FRR NodeProtect : Enabled Oper FRR NP : Enabled
FR Hop Limit : 16 Oper FRHopLimit : 16
FR Prop Admin Gr*: Disabled Oper FRPropAdmGrp : Disabled
Propagate Adm Grp: Disabled Oper Prop Adm Grp : Disabled
Inter-area : False
PCE Report : Disabled+ Oper PCE Report : Disabled
PCE Control : Disabled Oper PCE Control : Disabled
PCE Update ID : 0
Neg MTU : 1496 Oper MTU : 1496
Bandwidth : No Reservation Oper Bandwidth : 0 Mbps
Hop Limit : 255 Oper HopLimit : 255
Record Route : Record Oper Record Route : Record
Record Label : Record Oper Record Label : Record
Setup Priority : 7 Oper SetupPriority: 7
Hold Priority : 0 Oper HoldPriority : 0
Class Type : 0 Oper CT : 0
Backup CT : None
MainCT Retry : n/a
Rem :
MainCT Retry : 0
Limit :
Include Groups : Oper IncludeGroups:
None None
Exclude Groups : Oper ExcludeGroups:
None None
Adaptive : Enabled Oper Metric : 16777215
Preference : n/a
Path Trans : 1 CSPF Queries : 1
Degraded : False
Failure Code : noError
Failure Node : n/a
Explicit Hops :
10.20.1.1(L)
Dut-A.nokia.com
-> 10.20.1.2(L)
Dut-B.nokia.com
-> 10.20.1.4(L)
Dut-D.nokia.com
-> 10.20.1.5(L)
Dut-E.nokia.com
-> 10.20.1.6(L)
Dut-F.nokia.com
Actual Hops :
10.10.2.3(10.20.1.3) @ n Record Label : N/A
toA.Dut-C.nokia.com
(toC.system.nokia.com)
-> 10.10.2.1(10.20.1.1) @ n Record Label : 524281
10.10.2.1
(Dut-A.nokia.com)
-> 10.10.1.2(10.20.1.2) @ n Record Label : 524281
toA.Dut-B.nokia.com
(Dut-B.nokia.com)
-> 10.10.4.4(10.20.1.4) @ n Record Label : 524281
toB.Dut-D.nokia.com
(Dut-D.nokia.com)
-> 10.10.6.5(10.20.1.5) @ Record Label : 524281
toD.Dut-E.nokia.com
(Dut-E.nokia.com)
-> 10.10.10.6(10.20.1.6) Record Label : 524281
toE.Dut-F.nokia.com
(Dut-F.nokia.com)
Computed Hops :
10.10.2.3(S)
-> 10.10.2.1(S)
-> 10.10.1.2(S)
-> 10.10.4.4(S)
-> 10.10.6.5(S)
-> 10.10.10.6(S)
Resignal Eligible: False
Last Resignal : n/a CSPF Metric : 2003
===============================================================================
* indicates that the corresponding row element may have been truncated.
|
Label |
Description |
|---|---|
|
LSP Name |
The name of the LSP used in the path. |
|
To |
The IP address of the egress router for the LSP. |
|
Adm State |
Down — The path is administratively disabled. Up — The path is administratively enabled. |
|
Oper State |
Down — The path is operationally down. Up — The path is operationally up. |
|
LSPs |
The total number of LSPs configured. |
|
From |
The IP address of the ingress router for the LSP. |
|
LSP Up Time |
The length of time the LSP has been operational. |
|
Transitions |
The number of transitions that have occurred for the LSP. |
|
Retry Limit |
The number of attempts that the software should make to re-establish the LSP after it has failed. |
|
Signaling |
Specifies the signaling style. |
|
Hop Limit |
The maximum number of hops that an LSP can traverse, including the ingress and egress routers. |
|
Fast Reroute/FastFail Config |
enabled — Fast reroute is enabled. In the event of a failure, traffic is immediately rerouted on the pre-computed detour LSP, thus minimizing packet loss. disabled — There is no detour LSP from each node on the primary path. |
|
PathCompMethod |
pce — PCE path computation method is configured. local-cspf — Local CSPF path computation method is configured. |
|
Adspec/ ADSPEC |
enabled — The LSP includes advertising data (ADSPEC) objects in RSVP messages. disabled — The LSP does not include advertising data (ADSPEC) objects in RSVP messages. |
|
FallbkPathComp |
none — No fallback method is configured. local-cspf — Local CSPF fallback is configured. |
|
Primary |
The preferred path for the LSP. |
|
Secondary |
The alternate path that the LSP uses if the primary path is not available. |
|
Bandwidth |
The amount of bandwidth in Mb/s reserved for the LSP path. |
|
LSP Up Time |
The total time in increments that the LSP path has been operational. |
|
LSP Tunnel ID |
The value which identifies the label switched path that is signaled for this entry. |
|
To |
The IP address of the egress router for the LSP. |
|
LSP Down Time |
The total time in increments that the LSP path has not been operational. |
|
Path Changes |
The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated. |
|
Retry Timer |
The time in s, for LSP re-establishment attempts after an LSP failure. |
|
Resv Style |
se — Specifies a shared reservation environment with a limited reservation scope. This reservation style creates a single reservation over a link that is shared by an explicit list of senders. ff — Specifies a shared reservation environment with an explicit reservation scope. Specifies an explicit list of senders and a distinct reservation for each of them. |
|
Negotiated MTU |
The size of the maximum transmission unit (MTU) that is negotiated during establishment of the LSP. |
|
FR Hop Limit |
The total number of hops a detour LSP can take before merging back onto the main LSP path. |
|
LastResignalAttempt |
Displays the system up time when the last attempt to resignal this LSP was made. |
|
MBB Type |
Displays an enumerated integer that specifies the type of make-before-break (MBB). If none displays then there is no MBB in progress or no last MBB. |
|
MBB State |
Displays the state of the most recent invocation of the make-before-break functionality. |
|
End at |
Displays the system up time when the last MBB ended. |
|
Old Metric |
Displays the cost of the traffic engineered path for the LSP path prior to MBB. |
|
NextRetryIn |
Displays the amount of time (in s) remaining, before the next attempt is made to retry the in-progress MBB. |
|
RetryAttempt |
Displays the number attempts for the MBB is in progress. |
|
Failure Code |
Displays the reason code for in-progress MBB failure. A value of none indicates that no failure has occurred. See "LSP Failure Codes” in the 7705 SAR Gen 2 MPLS Guide for more information. |
|
Failure Node |
Displays the IP address of the node in the LSP path at which the in-progress MBB failed. When no failure has occurred, this value is none. |
|
Static LSPs |
Displays the number of static LSPs. |
|
Dynamic LSPs |
Displays the number of dynamic RSVP LSPs. |
|
P2P LSPs |
Displays the number of P2P RSVP LSPs. |
|
Detour LSPs |
Displays the number of detour RSVP LSPs. |
|
P2MP S2Ls |
Displays the number of P2MP RSVP S2Ls. |
|
MPLS-TP LSPs |
Displays the number of MPLS-TP LSPs. |
|
Mesh-P2P LSPs |
Displays the number of Mesh-P2P RSVP LSPs. |
|
One Hop-P2P LSPs |
Displays the number of one hop P2P RSVP LSPs. |
|
SR-TE LSPs |
Displays the number of SR-TE LSPs. |
|
Mesh-P2P SR-TE LSPs |
Displays the number of Mesh-P2P SR-TE LSPs. |
|
One Hop-P2P SR-TE LSPs |
Displays the number of one hop SR-TE LSPs. |
|
PCE Init SR-TE LSPs |
Displays the number of PCE initiated SR-TE LSPs. |
|
Label |
Description |
|---|---|
|
Auto BW |
Enabled — Auto-bandwidth adjustment is configured on this LSP. |
|
AB OpState |
Up – Auto-bandwidth is operationally enabled on this LSP Down – Auto-bandwidth is operationally disabled on this LSP |
|
Auto BW Min |
The minimum bandwidth of the LSP that auto-bandwidth can request (in Mb/s). |
|
Auto BW Max |
The maximum bandwidth of the LSP that auto-bandwidth can request (in Mb/s). |
|
AB Up Thresh |
The percent threshold for increasing LSP bandwidth. |
|
AB Down Thresh |
The percent threshold for decreasing LSP bandwidth. |
|
AB Up BW |
The absolute bandwidth threshold for increasing LSP bandwidth (in Mb/s). |
|
AB Down BW |
The absolute bandwidth threshold for decreasing LSP bandwidth (in Mb/s). |
|
AB Coll Intv |
The auto-bandwidth collection interval. |
|
AB Adj Mul |
The adjust-multiplier for this LSP (may be configured or inherited). |
|
AB Samp Mul |
The sample-multiplier for this LSP (may be configured or inherited). |
|
AB Adj Time |
The adjust-multiplier times the collection-interval (in minutes). |
|
AB Sample Time |
The sample-multiplier times the collection-interval (in minutes). |
|
AB Adj Cnt |
The adjust count (number of whole collection intervals since the start of the current adjust interval). |
|
AB Samp Cnt |
The sample count (number of whole collection intervals since the start of the current sample interval). |
|
AB Last Adj |
The system time of the last auto-bandwidth adjustment. |
|
AB Next Adj |
The approximate remaining time in the current adjust interval (adjust-multiplier – adjust count) times the collection interval (in min). This overstates the actual remaining time because the elapsed time in the current collection interval is not accounted for. |
|
AB Adj Cause |
The cause of the last auto-bandwidth adjustment:
|
|
AB Max AvgR* |
The maximum average data rate in any sample interval of the current adjust interval. |
|
AB Lst AvgR* |
The average data rate measured in the sample interval that ended most recently. |
|
AB Ovfl Lmt |
The configured value of the auto-bandwidth overflow-limit. |
|
AB Ovfl Cnt |
The number of overflow samples since the last reset. |
|
ABOvflThres |
The percent threshold for declaring an overflow sample. |
|
AB Ovfl BW |
The absolute bandwidth threshold for declaring an overflow sample (in Mb/s). |
|
AB Monitor BW |
True – monitor bandwidth is enabled on the LSP. False – monitor bandwidth is not enabled on the LSP. |
|
BFD Enable |
The operational state of BFD on the LSP. |
|
BFD failure-action |
The failure action that is configured for the BFD LSP. |
|
Lsp Self Ping |
Enabled – LSP Self-ping on this RSVP LSP or RSVP LSPs (one-hop-p2p or mesh-p2p) using this LSP template is enabled. Disabled – LSP Self-ping on this RSVP LSP or RSVP LSPs (one-hop-p2p or mesh-p2p) using this LSP template is disabled. Inherited – inherits the value configured under config>router>mpls>lsp-self-ping>rsvp-te |
|
OperPathCompMethod |
Displays the path computation method in use (pce, local, or none). |
|
Self ping timeouts |
Specifies the count of the number of LSP Self-ping timeouts. |
|
Label |
Description |
|---|---|
|
LSP Name |
Specifies the name of the LSP used in the path |
|
From |
Specifies the IP address of the ingress router for the LSP |
|
To |
Specifies the IP address of the egress router for the LSP |
|
Admin State |
Down — The path is administratively disabled Up — The path is administratively enabled |
|
Oper State |
Down — The path is operationally down Up — The path is operationally up |
|
Path Name |
Specifies the path name |
|
Path LSP ID |
Specifies the path LSP ID |
|
Path Type |
Specifies the path type |
|
Path Admin |
Specifies the path administrative state |
|
Path Oper |
Specifies the operational path state |
|
Out Interface |
Specifies the port of the out interface |
|
Out Label |
Specifies the out label value |
|
Path Up Time |
Specifies the duration of path up |
|
Path Down Time |
Specifies the duration of path down |
|
Retry Limit |
Specifies the retry limit value |
|
Retry Timer |
Specifies the retry timer value |
|
Retry Attempt |
Specifies the number of retries attempted |
|
Next Retry In |
Specifies the next retry in value |
|
BFD Configuration and State |
|
|
Template |
Specifies the BFD template |
|
Ping Interval |
Specifies the ping interval value |
|
Enable |
Specifies the BFD enable status |
|
State |
Specifies the BFD state |
|
WaitForUpTimer |
Specifies the wait for up timer value |
|
OperWaitForUpTimer |
Specifies the operational wait for up timer value |
|
WaitForUpTmLeft |
Specifies the wait for up time left value |
|
Adspec |
Specifies the Adspec status |
|
Oper Adspec |
Specifies the operational Adspec status |
|
PathCompMethod |
Specifies the path computation method |
|
OperPathCompMethod |
Specifies the operational path computation method |
|
MetricType |
Specifies the metric type value |
|
Oper MetricType |
Specifies the operational metric type value |
|
Least Fill |
Specifies the least fill status |
|
Oper LeastFill |
Specifies the operational least fill status |
|
FRR |
Specifies the FRR status |
|
Oper FRR |
Specifies the operational FRR status |
|
FRR NodeProtect |
Specifies the FRR node protect status |
|
Oper FRR NP |
Specifies the operational FRR node protect status |
|
FR Hop Limit |
Specifies the FR hop limit value |
|
Oper FRHopLimit |
Specifies the operational FR hop limit value |
|
FR Prop Admin Gr* |
Specifies the FR prop administrative group status |
|
Oper FRPropAdmGrp |
Specifies the operational FR prop administrative group status |
|
Propagate Adm Grp |
Specifies the prop administrative group status |
|
Oper PropAdmGrp |
Specifies the operational prop administrative group status |
|
Inter-area |
Specifies the inter area status |
|
PCE Report |
Specifies the operational PCE report status |
|
Oper PCE Report |
Specifies the |
|
PCE Control |
Specifies the PCE control status |
|
Oper PCE Control |
Specifies the operational PCE control status |
|
PCE Update ID |
Specifies the PCE update ID |
|
Neg MTU |
Specifies the negotiated MTU value |
|
Oper MTU |
Specifies the operational MTU value |
|
Bandwidth |
Specifies the bandwidth type |
|
Oper Bandwidth |
Specifies the operational bandwidth |
|
Hop Limit |
Specifies the hop limit |
|
Oper HopLimit |
Specifies the operational hop limit |
|
Record Route |
Specifies the record route value |
|
Oper Record Route |
Specifies the operational record route value |
|
Setup Priority |
Specifies the setup priority value |
|
Oper SetupPriority |
Specifies the operational setup priority value |
|
Hold Priority |
Specifies the hold priority value |
|
Oper HoldPriority |
Specifies the operational hold priority value |
|
Class Type |
Specifies the class type |
|
Oper CT |
Specifies the operational class type |
|
Backup CT |
Specifies the backup class type |
|
MainCT Retry Rem |
Specifies the main class type rem value |
|
MainCT Retry Limit |
Specifies the main class type retry limit |
|
Include Groups |
Specifies the include groups |
|
Oper IncludeGroups |
Specifies the operational include groups |
|
Exclude Groups |
Specifies the exclude groups |
|
Oper ExcludeGroups |
Specifies the operational exclude groups |
|
Adaptive |
Specifies the adaptive status |
|
Oper Metric |
Specifies the operational metric |
|
Preference |
Specifies the preference |
|
Path Trans |
Specifies the path trans value |
|
CSPF Queries |
Specifies the number of CSPF queries |
|
Degraded |
Specifies the degraded status |
|
Failure Code |
Specifies the failure code |
|
Failure Node |
Specifies the failure node |
|
Explicit Hops |
Specifies the explicit hops |
|
Actual Hops |
Specifies the actual hops |
|
Record Label |
Specifies the record label |
|
Computed Hops |
Specifies the computed hops |
|
Resignal Eligible |
Specifies the resignal eligibility status |
|
Last Resignal |
Specifies the last resignal |
|
CSPF Metric |
Specifies the CSPF metric value |
lsp
Syntax
lsp lsp-name
Context
[Tree] (clear>router>mpls lsp)
Full Context
clear router mpls lsp
Description
This command resets and restarts an LSP.
Parameters
- lsp-name
-
Specifies the LSP to clear, up to 64 characters in length.
Platforms
7705 SAR Gen 2
lsp
Syntax
lsp [plsp-id plsp-id]
lsp lsp-type lsp-type [tunnel-id tunnel-id]
Context
[Tree] (tools>dump>router>pcep>pcc lsp)
Full Context
tools dump router pcep pcc lsp
Description
This command displays LSP information.
Parameters
- plsp-id
-
Specifies the PLSP ID.
- lsp-type
-
Specifies the LSP type.
- tunnel-id
-
Specifies the tunnel ID.
Platforms
7705 SAR Gen 2
lsp-db
lsp-db
Syntax
lsp-db [lsp-type lsp-type] [delegated-pce ip-address]
lsp-db [lsp-type lsp-type] from ip-address [ delegated-pce ip-address]
lsp-db [lsp-type lsp-type] lsp lsp-name [ delegated-pce ip-address]
lsp-db [lsp-type lsp-type] to ip-address [ delegated-pce ip-address]
lsp-db [lsp-type lsp-type] tunnel-id tunnel-id
Context
[Tree] (show>router>pcep>pcc lsp-db)
Full Context
show router pcep pcc lsp-db
Description
This command displays the PCEP LSP-DB information.
Parameters
- lsp-type
-
Specifies the LSP type.
- ip-address
-
Specifies the IP address.
- lsp-name
-
Specifies the LSP name, up to 80 characters.
- tunnel-id
-
Specifies the tunnel ID.
Platforms
7705 SAR Gen 2
Output
LSP-DB Output
Output fields: LSP-DB describes LSP-DB output fields.
Output Example*A:Dut-C>config>router>mpls# show router pcep pcc lsp-db
===============================================================================
PCEP Path Computation Client (PCC) LSP Update Info
===============================================================================
PCEP-specific LSP ID: 1
LSP ID : 11264 LSP Type : pce-init-seg-rt
Tunnel ID : 16386 Extended Tunnel Id : 10.20.1.3
LSP Name : intra_area__no_constraints
Source Address : 10.20.1.3 Destination Address : 10.20.1.6
LSP Delegated : True Delegate PCE Address: 10.20.1.24
Oper Status : active
-------------------------------------------------------------------------------
PCEP-specific LSP ID: 2
LSP ID : 3072 LSP Type : pce-init-seg-rt
Tunnel ID : 16387 Extended Tunnel Id : 10.20.1.3
LSP Name : intra_area_nonDefault
Source Address : 10.20.1.3 Destination Address : 10.20.1.6
LSP Delegated : True Delegate PCE Address: 10.20.1.24
Oper Status : active
===============================================================================
|
Label |
Description |
|---|---|
|
PCEP-specific LSP ID |
Specifies the PCEP specific LSP ID. |
|
LSP ID |
Specifies the LSP ID. |
|
LSP Type |
rsvp-p2p — Indicates the LSP type is rsvp-p2p. rsvp-p2mp — Indicates the LSP type is rsvp-p2mp. seg-rt — Indicates the LSP type is seg-rt. pce-init-seg-rt — Indicates the LSP type is pce-init-seg-rt. |
|
Tunnel ID |
Specifies the tunnel ID. |
|
Extended Tunnel Id |
Specifies the extended tunnel ID. |
|
LSP Name |
Specifies the LSP name |
|
Source Address |
Specifies the source IP address. |
|
Destination Address |
Specifies the destination IP address. |
|
LSP Delegated |
True — Specifies that LSP Delegation is true. False— Specifies that LSP Delegation is false. |
|
Delegate PCE Address |
Specifies the delegate PCE IP address. |
|
Oper Status |
active — Specifies that the operational status is active. down — Specifies that the operational status is down. |
lsp-history
lsp-history
Syntax
lsp-history [lsp-name]
Context
[Tree] (tools>dump>router>mpls lsp-history)
Full Context
tools dump router mpls lsp-history
Description
This command displays the recorded history of LSP events for all RSVP-TE and SR-TE LSPs if no LSP name is provided, or only the named LSP if an LSP name is provided.
Parameters
- lsp-name
-
Specifies the LSP name, up to 64 characters.
Platforms
7705 SAR Gen 2
Output
The following example shows the LSP history output, and Output fields: MPLS LSP history describes the output fields.
tools dump router mpls lsp-history "C_F_5"
Info: lsp history recording is Enabled
=============================================================================
LSP: C_F_5
Hist Log [size=100] Last Entry = 17
=============================================================================
17 2022/09/20 06:43:52.15 UTC LSP Up
16 2022/09/20 06:43:52.15 UTC Active path selected: C_F_sec
15 2022/09/20 06:43:52.15 UTC Path Up: C_F_sec:47618
14 2022/09/20 06:43:52.13 UTC CSPF Computation result Success: C_F_sec
13 2022/09/20 06:43:52.13 UTC ERO: IPv4Prefix 10.10.5.3/32, Strict
12 2022/09/20 06:43:52.13 UTC Active path removed: C_F_5
11 2022/09/20 06:43:52.13 UTC LSP Down Reason: Admin Down
10 2022/09/20 06:43:52.13 UTC Path Down: C_F_5:pathAdminDown
9 2022/09/20 06:42:58.57 UTC LSP-ID Created: 47618
8 2022/09/20 06:39:49.53 UTC LSP Up
7 2022/09/20 06:39:49.53 UTC Active path selected: C_F_5
6 2022/09/20 06:39:49.53 UTC Path Up: C_F_5:47616
5 2022/09/20 06:39:49.53 UTC CSPF Computation result Success: C_F_5
4 2022/09/20 06:39:49.53 UTC ERO: IPv4Prefix 10.10.11.3/32, Strict
3 2022/09/20 06:39:32.18 UTC CSPF result Failure: No CspfRouteOwner
2 2022/09/20 06:39:32.18 UTC LSP-ID Created: 47616
1 2022/09/20 06:39:32.15 UTC Created: C_F_5
| Label | Description |
|---|---|
|
Info |
Specifies whether the LSP history event recording is enabled or disabled |
|
LSP |
Specifies the name of the LSP |
|
Hist Log |
Specifies the size of the history log |
|
Last Entry |
Specifies the number of entries |
lsp-history
Syntax
lsp-history [lsp-name]
Context
[Tree] (clear>router>mpls lsp-history)
Full Context
clear router mpls lsp-history
Description
This command clears the recorded history of LSP events for all RSVP-TE and SR-TE LSPs if no LSP name is provided, or only the named LSP if the LSP name is provided.
Parameters
- lsp-name
-
Specifies the LSP name, up to 64 characters.
Platforms
7705 SAR Gen 2
lsp-template
lsp-template
Syntax
lsp-template [lsp-template-name] [detail]
lsp-template [lsp-template-name] bindings
Context
[Tree] (show>router>mpls lsp-template)
Full Context
show router mpls lsp-template
Description
This command displays MPLS LSP template information.
Parameters
- lsp-template-name
-
Specifies the LSP template name, up to 32 characters.
- detail
-
Displays detailed information.
- bindings
-
Displays any bindings associated with the LSP template.
Platforms
7705 SAR Gen 2
Output
The following outputs are examples of LSP template information, and Output fields: LSP template describes the output fields.
Output Example*A:Dut-C>config>router>mpls# show router mpls lsp-template
===============================================================================
MPLS LSP Templates
===============================================================================
Name Type Admin State No Of LSPs
-------------------------------------------------------------------------------
pce_init_sr_te_template PceInitP2PSrTe Up 1
pce_init_sr_te_template_nonDef PceInitP2PSrTe Up 1
-------------------------------------------------------------------------------
LSP Templates : 2
*A:Dut-C>config>router>mpls# show router mpls lsp-template detail
===============================================================================
MPLS LSP Templates (Detail)
===============================================================================
Legend :
+ - Inherited
===============================================================================
-------------------------------------------------------------------------------
LSP Template : pce_init_sr_te_template
-------------------------------------------------------------------------------
Type : PceInitP2PSrTe Admin State : Up
From : 10.20.1.3+
Template ID : Default
Default Path : fully_loose
Bandwidth : 0 Mbps Hop Limit : 255
CSPF : Enabled Use TE metric : Disabled
Include Groups : Exclude Groups :
None None
Record Route : Record Record Label : Record
Retry Limit : 0 Retry Timer : 30 sec
LSP Count : 1 Ref Count : 0
Load Bal Wt : N/A ClassForwarding : Disabled
VprnAutoBind : Enabled
IGP Shortcut : Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
Metric : 0
BGP Transport Tunn : Enabled
Entropy Label : Enabled+
PCE Report : Enabled
Admin Tags : None
-------------------------------------------------------------------------------
LSP Template : pce_init_sr_te_template_nonDef
-------------------------------------------------------------------------------
Type : PceInitP2PSrTe Admin State : Up
From : 10.20.1.3+
Template ID : 4294967295
Default Path : fully_loose
Bandwidth : 0 Mbps Hop Limit : 255
CSPF : Enabled Use TE metric : Disabled
Include Groups : Exclude Groups :
None None
Record Route : Record Record Label : Record
Retry Limit : 0 Retry Timer : 30 sec
LSP Count : 1 Ref Count : 0
Load Bal Wt : N/A ClassForwarding : Disabled
VprnAutoBind : Enabled
IGP Shortcut : Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
Metric : 0
BGP Transport Tunn : Enabled
Entropy Label : Enabled+
PCE Report : Enabled
Admin Tags : None
===============================================================================
+ indicates inherited values
*A:Dut-C# show router mpls lsp-template detail
========================================================================
MPLS LSP Templates (Detail)
========================================================================
------------------------------------------------------------------------
LSP Template : ipmsi
------------------------------------------------------------------------
Type : P2MP Admin State : Up
Default Path : path_ipmsi Adaptive : Enabled
Bandwidth : 0 Mbps Hop Limit : 255
CSPF : Enabled Use TE metric : Disabled
Include Groups : Exclude Groups :
None None
FastReroute : Enabled
FR Method : Facility FR Hop Limit : 16
Record Route : Record Record Label : Record
Retry Limit : 0 Retry Timer : 30 sec
LSP Count : 3 Ref Count : 3
========================================================================
*A:Dut-A# show router mpls lsp-template "toC" detail
===============================================================================
MPLS LSP Templates (Detail)
===============================================================================
Legend :
+ - Inherited
===============================================================================
-------------------------------------------------------------------------------
LSP Template : toC
-------------------------------------------------------------------------------
Type : OnDemandP2PSrTe Admin State : Up
From : 10.20.1.1+
Default Path : toC
Bandwidth : 0 Mbps Hop Limit : 255
PathCompMethod : pce Metric Type : igp
Local Sr Protection: preferred Label Stack Reduct*: Disabled
Include Groups : Exclude Groups :
None None
Record Route : Record Record Label : Record
Retry Limit : 0 Retry Timer : 30 sec
LSP Count : 1 Ref Count : 0
Load Bal Wt : N/A ClassForwarding : Disabled
VprnAutoBind : Enabled
IGP Shortcut : Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
Metric : 0
BGP Transport Tunn : Enabled
Egress Stats : Disabled
Stat Mode : aggregate
BFD Template Name : sbfdTemplate BFD LSP Ping Intvl : N/A
BFD Enable : True BFD Failure-action : None
WaitForUpTimer : 30
Entropy Label : Enabled+ Override Tunnel ELC: Disabled
PCE Report : Enabled
Admin Tags :
green
Lsp Self Ping : Inherited
PCE Control : Enabled FallbkPathComp : not-applicable
Path Profile :
Profile : 1 Group : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
+ indicates inherited values
*A:Dut-A#
|
Label |
Description |
|---|---|
|
Name |
Specifies the name. |
|
Type |
Specifies the type. |
|
Admin State |
Specifies the up or down administrative state. |
|
No of LSPs |
Specifies the number of LSPs. |
|
LSP Templates |
Specifies the number of LSP templates. |
|
LSP Template |
Specifies the name of the LSP template. |
|
From |
Specifies the from IP address. |
|
Template ID |
Specifies the template ID. |
|
Default Path |
Specifies the default path value. |
|
Bandwidth |
Specifies the bandwidth value in Mbps. |
|
Hop Limit |
Specifies the maximum number of hops. |
|
CSPF |
Specifies the enabled or disabled status for CSPF. |
|
Use TE metric |
Specifies the enabled or disabled status for use TE metric. |
|
Include Groups |
Specifies the included groups or none for no included groups. |
|
Exclude Groups |
Specifies the excluded groups or none for no excluded groups. |
|
Record Route |
Specifies the record route value. |
|
Record Label |
Specifies the record label value. |
|
Retry Limit |
Specifies the retry limit value. |
|
Retry Timer |
Specifies the retry timer value. |
|
LSP Count |
Specifies the LSP count. |
|
Ref Count |
Specifies the reference count number. |
|
Load Bal Wt |
Specifies the load balance weight value. |
|
ClassForwarding |
Specifies the enabled or disabled status for class forwarding. |
|
VprnAutoBind |
Specifies the enabled or disabled status for VPRN autobind. |
|
IGP Shortcut |
Specifies the enabled or disabled status for IGP shortcut. |
|
IGP LFA |
Specifies the enabled or disabled status for IGP LFA. |
|
IGP Rel Metric |
Specifies the enabled or disabled status for IGP Rel metric. |
|
Metric |
Specifies the metric value. |
|
BGP Transport Tunn |
Specifies the enabled or disabled status for BGP transport tunnels. |
|
Entropy Label |
Specifies the enabled or disabled status for entropy label. |
|
PCE Report |
Specifies the enabled or disabled status for PCE reports. |
|
Admin Tags |
Specifies the administrative tag names or none. |
|
PCE Control |
Specifies the enabled or disabled status for the PCE control. |
|
FallbkPathComp |
none — No fallback method is configured. local-cspf— Local CSPF fallback is configured. |
lspinfo
lspinfo
Syntax
lspinfo [lsp-name] [detail]
Context
[Tree] (tools>dump>router>mpls lspinfo)
Full Context
tools dump router mpls lspinfo
Description
This command dumps MPLS LSP information.
Parameters
- lsp-name
-
Specifies the LSP name, up to 64 characters.
- detail
-
Specifies detailed LSP information.
Platforms
7705 SAR Gen 2
Output
The following output is an example of a BFD session that is up (LSPS UP).
Output Example*A:Dut-B# tools dump router mpls lspinfo
LSP "lsp1" LspIdx 1 LspType Dynamic State LSPS_UP Flags 0x2000
NumPaths 3 NumSdps 0 NumCBFSdps 0 NumFltrEntries 0
HoldTimeRemaining 0secs ClassType 0 Metric 0 OperMetric 2000
LDPoRsvp Include VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 EntropyLbl inherit MTU 1500 LspAdminState :2
LspOperState : 2 lspRowStatus : 1
ClassForwarding: Disabled
BFD Enabled Template bfdTemp1 PingInterval 60 Failure-Action Failover
The following output is an example of a BFD session that is degraded (LSPS DEGRADED).
*A:Dut-B# /tools dump router mpls lspinfo "lsp1"
LSP "lsp1" LspIdx 1 LspType Dynamic State LSPS_DEGRADED Flags 0x2000
NumPaths 3 NumSdps 0 NumCBFSdps 0 NumFltrEntries 0
HoldTimeRemaining 0secs ClassType 0 Metric 0 OperMetric 2000
LDPoRsvp Include VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 EntropyLbl inherit MTU 1500 LspAdminState :2
LspOperState : 2 lspRowStatus : 1
ClassForwarding: Disabled
BFD Enabled Template bfdTemp1 PingInterval 60 Failure-Action Failover
Total Ingress LSP Count : 1
The following output is an example of LSP Self-ping InProgress.
*A:Dut-C>config>router>mpls# /tools dump router mpls lspinfo "1" detail
LSP "1" LspIdx 1 LspType Dynamic State LSPS_UP Flags 0x2000
From :: To 10.20.1.6 AdminState Up OperState Up RowStatus Active
NumPaths 1 NumSdps 0 NumCBFSdps 0 NumFltrEntries 0
ActivePath 1::p(LspId 34306)
HoldTimeRemaining 0secs ClassType 0 Metric 0 OperMetric 20
LDPoRsvp Include VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 MTU 1500 InUseByLdp FALSE
EntropyLabel inherit OperEntropyLabel enable
ClassForwarding: Disabled
BFD Disabled UpdLspBfd No Template n/a PingInterval 60 FailureAction None
PCE Report: Disabled PCE Control: Disabled
Path Profile:
None
Admin Tags:
None
Lsp-self-ping: Config: inherit, Oper: Enabled, TimedOutCnt: 0
Path "p" Flags 0x0 LspId 34306 LspPathIndex 1 PathType Primary ActivePath Yes
RowStatus Active LastChange 000 00:00:09.730
AdminState Up OperState Up OperStateChange 000 00:00:17.760
TE Computed Hop List:
Hop[1] IngIp 10.20.1.3 IngLnkId 0 EgrIp 10.10.5.3 EgrLnkId 0 RtrId 10.20.1.3 Flag 0x0
Hop[2] IngIp 10.10.5.5 IngLnkId 0 EgrIp 10.10.10.5 EgrLnkId 0 RtrId 10.20.1.5 Flag 0x0
Hop[3] IngIp 10.10.10.6 IngLnkId 0 EgrIp 10.20.1.6 EgrLnkId 0 RtrId 10.20.1.6 Flag 0x0
LspPath FsmState LSP_PATH_S_UP Flags 0x0
RetryAttempts 0 RetryInterval 30 NextRetryIn 0secs
Class Type 0 SetupPri 7 HoldPri 0 Pref 0 HopLimit 255 BW 1Mbps
TotIgpCost 20 OperMetric 20 MTU 1500
BFD Disabled Template n/a PingInterval 60
Degraded No
Oper Values:
Class Type 0 SetupPri 7 HoldPri 0 HopLimit 255 BW 0Mbps
RecordRoute RecordLabel No Adspec
No PropagateAdminGroup Exclude 0x00000000 Include 0x00000000
No FRR
Metric 20 CSPF No Least Fill Intra-area
NegotiatedEntropyLabel Disabled
PCE-Computed No PCE-Reported No PCE-Controlled No
BFD State N/A
MBB is in progress -
Type Config Change LspId 34308 FsmState LSP_PATH_S_UP Flags 0x20
RetryAttempts 1 NextRetryIn 0secs CspfFailures 0
Started 2020/05/23 01:09:56.84 UTC HoldTimeRemaining 21secs
MBB Self-Ping: State InProgress OamSessId 1007 Started 2020/05/23 01:09:57.61 UTC Remaining 22 secs
Total Ingress LSP Count : 1
The following output is an example of LSP Self-ping OK.
*A:Dut-C>config>router>mpls# /tools dump router mpls lspinfo "1" detail
LSP "1" LspIdx 1 LspType Dynamic State LSPS_UP Flags 0x2000
From :: To 10.20.1.6 AdminState Up OperState Up RowStatus Active
NumPaths 1 NumSdps 0 NumCBFSdps 0 NumFltrEntries 0
ActivePath 1::p(LspId 34308)
HoldTimeRemaining 0secs ClassType 0 Metric 0 OperMetric 20
LDPoRsvp Include VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 MTU 1500 InUseByLdp FALSE
EntropyLabel inherit OperEntropyLabel enable
ClassForwarding: Disabled
BFD Disabled UpdLspBfd No Template n/a PingInterval 60 FailureAction None
PCE Report: Disabled PCE Control: Disabled
Path Profile:
None
Admin Tags:
None
Lsp-self-ping: Config: inherit, Oper: Enabled, TimedOutCnt: 0
Path "p" Flags 0x0 LspId 34308 LspPathIndex 1 PathType Primary ActivePath Yes
RowStatus Active LastChange 000 00:00:42.760
AdminState Up OperState Up OperStateChange 000 00:00:50.790
TE Computed Hop List:
Hop[1] IngIp 10.20.1.3 IngLnkId 0 EgrIp 10.10.5.3 EgrLnkId 0 RtrId 10.20.1.3 Flag 0x0
Hop[2] IngIp 10.10.5.5 IngLnkId 0 EgrIp 10.10.10.5 EgrLnkId 0 RtrId 10.20.1.5 Flag 0x0
Hop[3] IngIp 10.10.10.6 IngLnkId 0 EgrIp 10.20.1.6 EgrLnkId 0 RtrId 10.20.1.6 Flag 0x0
LspPath FsmState LSP_PATH_S_UP Flags 0x0
RetryAttempts 0 RetryInterval 30 NextRetryIn 0secs
Class Type 0 SetupPri 7 HoldPri 0 Pref 0 HopLimit 255 BW 1Mbps
TotIgpCost 20 OperMetric 20 MTU 1500
BFD Disabled Template n/a PingInterval 60
Degraded No
Oper Values:
Class Type 0 SetupPri 7 HoldPri 0 HopLimit 255 BW 1Mbps
RecordRoute RecordLabel No Adspec
No PropagateAdminGroup Exclude 0x00000000 Include 0x00000000
No FRR
Metric 20 CSPF No Least Fill Intra-area
NegotiatedEntropyLabel Disabled
PCE-Computed No PCE-Reported No PCE-Controlled No
BFD State N/A
Self-Ping: State OK Ended 2020/05/23 01:10:16.63 UTC
Last MBB -
Type Config Change State Successful CspfFailures 0 FailCode noError
Started 2020/05/23 01:09:56.84 UTC
Ended 2020/05/23 01:10:16.63 UTC
Self-ping Started 2020/05/23 01:09:57.61 UTC
Self-ping Ended 2020/05/23 01:10:16.63 UTC
Pre-MBB IGP Cost 20
Pre-MBB Explicit Route -
[1] 10.10.5.5 Flags 0x0
[2] 10.10.10.6 Flags 0x0
Total Ingress LSP Count : 1
The following output is an example of LSP Self-Ping TimedOut.
*A:Dut-C>config>router>mpls# /tools dump router mpls lspinfo "1" detail
LSP "1" LspIdx 1 LspType Dynamic State LSPS_UP Flags 0x2000
From :: To 10.20.1.6 AdminState Up OperState Up RowStatus Active
NumPaths 1 NumSdps 0 NumCBFSdps 0 NumFltrEntries 0
ActivePath 1::p(LspId 34310)
HoldTimeRemaining 0secs ClassType 0 Metric 0 OperMetric 20
LDPoRsvp Include VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 MTU 1500 InUseByLdp FALSE
EntropyLabel inherit OperEntropyLabel enable
ClassForwarding: Disabled
BFD Disabled UpdLspBfd No Template n/a PingInterval 60 FailureAction None
PCE Report: Disabled PCE Control: Disabled
Path Profile:
None
Admin Tags:
None
Lsp-self-ping: Config: inherit, Oper: Enabled, TimedOutCnt: 1
Path "p" Flags 0x0 LspId 34310 LspPathIndex 1 PathType Primary ActivePath Yes
RowStatus Active LastChange 000 00:00:37.200
AdminState Up OperState Up OperStateChange 000 00:06:25.530
TE Computed Hop List:
Hop[1] IngIp 10.20.1.3 IngLnkId 0 EgrIp 10.10.5.3 EgrLnkId 0 RtrId 10.20.1.3 Flag 0x0
Hop[2] IngIp 10.10.5.5 IngLnkId 0 EgrIp 10.10.10.5 EgrLnkId 0 RtrId 10.20.1.5 Flag 0x0
Hop[3] IngIp 10.10.10.6 IngLnkId 0 EgrIp 10.20.1.6 EgrLnkId 0 RtrId 10.20.1.6 Flag 0x0
LspPath FsmState LSP_PATH_S_UP Flags 0x0
RetryAttempts 0 RetryInterval 30 NextRetryIn 0secs
Class Type 0 SetupPri 7 HoldPri 0 Pref 0 HopLimit 255 BW 2Mbps
TotIgpCost 20 OperMetric 20 MTU 1500
BFD Disabled Template n/a PingInterval 60
Degraded No
Oper Values:
Class Type 0 SetupPri 7 HoldPri 0 HopLimit 255 BW 2Mbps
RecordRoute RecordLabel No Adspec
No PropagateAdminGroup Exclude 0x00000000 Include 0x00000000
No FRR
Metric 20 CSPF No Least Fill Intra-area
NegotiatedEntropyLabel Disabled
PCE-Computed No PCE-Reported No PCE-Controlled No
BFD State N/A
Self-Ping: State TimedOut Ended 2020/05/23 01:16:07.61 UTC
Last MBB -
Type Config Change State Successful CspfFailures 0 FailCode noError
Started 2020/05/23 01:15:37.14 UTC
Ended 2020/05/23 01:16:07.61 UTC
Self-ping Started 2020/05/23 01:15:37.61 UTC
Self-ping Ended 2020/05/23 01:16:07.61 UTC
Pre-MBB IGP Cost 20
Pre-MBB Explicit Route -
[1] 10.10.5.5 Flags 0x0
[2] 10.10.10.6 Flags 0x0
Total Ingress LSP Count : 1
The following output is an example of LSP Self-Ping StartFailed.
*A:Dut-C>config>router>mpls# /tools dump router mpls lspinfo "3000" detail
LSP "3000" LspIdx 3000 LspType Dynamic State LSPS_UP Flags 0x2000
From :: To 10.20.1.6 AdminState Up OperState Up RowStatus Active
NumPaths 1 NumSdps 0 NumCBFSdps 0 NumFltrEntries 0
ActivePath 3000::p(LspId 32256)
HoldTimeRemaining 0secs ClassType 0 Metric 0 OperMetric 2000
LDPoRsvp Include VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 MTU 1500 InUseByLdp FALSE
EntropyLabel inherit OperEntropyLabel enable
ClassForwarding: Disabled
BFD Disabled UpdLspBfd No Template n/a PingInterval 60 FailureAction None
PCE Report: Disabled PCE Control: Disabled
Path Profile:
None
Admin Tags:
None
Lsp-self-ping: Config: inherit, Oper: Enabled, TimedOutCnt: 0
Path "p" Flags 0x0 LspId 32256 LspPathIndex 3000 PathType Primary ActivePath Yes
RowStatus Active LastChange 000 00:00:15.940
AdminState Up OperState Up OperStateChange 000 00:01:19.970
TE Computed Hop List:
Hop[1] IngIp 10.20.1.3 IngLnkId 0 EgrIp 10.10.5.3 EgrLnkId 0 RtrId 10.20.1.3 Flag 0x0
Hop[2] IngIp 10.10.5.5 IngLnkId 0 EgrIp 10.10.10.5 EgrLnkId 0 RtrId 10.20.1.5 Flag 0x0
Hop[3] IngIp 10.10.10.6 IngLnkId 0 EgrIp 10.20.1.6 EgrLnkId 0 RtrId 10.20.1.6 Flag 0x0
LspPath FsmState LSP_PATH_S_UP Flags 0x0
RetryAttempts 0 RetryInterval 30 NextRetryIn 0secs
Class Type 0 SetupPri 7 HoldPri 0 Pref 0 HopLimit 255 BW 2Mbps
TotIgpCost 2000 OperMetric 2000 MTU 1500
BFD Disabled Template n/a PingInterval 60
Degraded No
Oper Values:
Class Type 0 SetupPri 7 HoldPri 0 HopLimit 255 BW 1Mbps
RecordRoute RecordLabel No Adspec
No PropagateAdminGroup Exclude 0x00000000 Include 0x00000000
No FRR
Metric 2000 CSPF No Least Fill Intra-area
NegotiatedEntropyLabel Disabled
PCE-Computed No PCE-Reported No PCE-Controlled No
BFD State N/A
MBB is in progress -
Type Config Change LspId 32258 FsmState LSP_PATH_S_UP Flags 0x20
RetryAttempts 1 NextRetryIn 0secs CspfFailures 0
Started 2020/05/23 01:27:20.41 UTC HoldTimeRemaining 1secs
MBB Self-Ping: State StartFailed OamSessId 0 Started 2020/05/23 01:27:32.88 UTC Remaining 27 secs
Total Ingress LSP Count : 1
The following output is an example of LSP Self-Ping OamNoRsrc.
*A:Dut-C>config>router>mpls# /tools dump router mpls lspinfo "5000" detail
LSP "5000" LspIdx 5000 LspType Dynamic State LSPS_UP Flags 0x2000
From :: To 10.20.1.6 AdminState Up OperState Up RowStatus Active
NumPaths 1 NumSdps 0 NumCBFSdps 0 NumFltrEntries 0
ActivePath 5000::p(LspId 61954)
HoldTimeRemaining 0secs ClassType 0 Metric 0 OperMetric 2000
LDPoRsvp Include VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 MTU 1500 InUseByLdp FALSE
EntropyLabel inherit OperEntropyLabel enable
ClassForwarding: Disabled
BFD Disabled UpdLspBfd No Template n/a PingInterval 60 FailureAction None
PCE Report: Disabled PCE Control: Disabled
Path Profile:
None
Admin Tags:
None
Lsp-self-ping: Config: inherit, Oper: Enabled, TimedOutCnt: 1
Path "p" Flags 0x0 LspId 61954 LspPathIndex 5000 PathType Primary ActivePath Yes
RowStatus Active LastChange 000 00:02:05.740
AdminState Up OperState Up OperStateChange 000 00:03:18.790
TE Computed Hop List:
Hop[1] IngIp 10.20.1.3 IngLnkId 0 EgrIp 10.10.5.3 EgrLnkId 0 RtrId 10.20.1.3 Flag 0x0
Hop[2] IngIp 10.10.5.5 IngLnkId 0 EgrIp 10.10.10.5 EgrLnkId 0 RtrId 10.20.1.5 Flag 0x0
Hop[3] IngIp 10.10.10.6 IngLnkId 0 EgrIp 10.20.1.6 EgrLnkId 0 RtrId 10.20.1.6 Flag 0x0
LspPath FsmState LSP_PATH_S_UP Flags 0x0
RetryAttempts 0 RetryInterval 30 NextRetryIn 0secs
Class Type 0 SetupPri 7 HoldPri 0 Pref 0 HopLimit 255 BW 2Mbps
TotIgpCost 2000 OperMetric 2000 MTU 1500
BFD Disabled Template n/a PingInterval 60
Degraded No
Oper Values:
Class Type 0 SetupPri 7 HoldPri 0 HopLimit 255 BW 2Mbps
RecordRoute RecordLabel No Adspec
No PropagateAdminGroup Exclude 0x00000000 Include 0x00000000
No FRR
Metric 2000 CSPF No Least Fill Intra-area
NegotiatedEntropyLabel Disabled
PCE-Computed No PCE-Reported No PCE-Controlled No
BFD State N/A
Self-Ping: State OamNoRsrc Ended 2020/05/23 01:28:17.87 UTC
Last MBB -
Type Config Change State Successful CspfFailures 0 FailCode noError
Started 2020/05/23 01:27:22.57 UTC
Ended 2020/05/23 01:28:17.87 UTC
Self-ping Started 2020/05/23 01:27:45.86 UTC
Self-ping Ended 2020/05/23 01:28:17.87 UTC
Pre-MBB IGP Cost 2000
Pre-MBB Explicit Route -
[1] 10.10.5.5 Flags 0x0
[2] 10.10.10.6 Flags 0x0
Total Ingress LSP Count : 1